RIDGID | RP 330-B | RP 330 - Series Gain time - work efficiently

Pressing | RP 330 Series
Gain time - work efficiently - be in control
RIDGID® Pressing Technology™ drives the speed and reliability you need when making pressed connections on Copper,
Stainless Steel, PEX and Multi-Layer Tubing. High Performance RIDGID® Pressing Tools provide repeatable, consistent
joints every time. Whether you are pressing 12 mm PEX or 108 mm Copper, RIDGID® has the right Press Tool for the job.
RP 330 - Series
RIDGID® Pressing Technology for Copper, Stainless Steel,
PEX and Multilayer Tubing Offers:
• Speed - connections made in as little as five seconds, with the fastest
pressing tools in the industry.
• Reliability - electro-hydraulic pressing tools designed with high-end
diagnostics allow better control over the crimping processes, ensuring the
same watertight seal is made with every connection. The unique
monitoring system guarantees that every single pressing action is made to
the tolerances set by the leading system suppliers.
• System Compatibility - pressing tools, jaws that are designed in
conjunction with the fitting manufacturers, ensuring total system
compatibility.
• Maximum Uptime - battery-powered pressing tools that use 18 V
Li-Ion- batteries, enabling more work-per-charge and use in extreme
temperatures.
• Durability - Battery and corded pressing tools that provide, thanks to the
integral hydraulic pump and a monitored system of recommended service
intervals, the longest life-cycle in the industry with 32000 presses before
tools require recalibration.
Jaw pin safety locking
mechanism prevents tool
from working if not properly
closed.
• E3 - press tools, designed with Expert-Engineered Ergonomics for
maximum comfort with everyday use.
TM
Jaw head compatible with
most common used Standard
jaws in the market. 270° jaw
rotation.
350 mm
455 mm
On / Off
switch
LED
indicators,
Green, Red
and Yellow
LED
Status
Green
Glows
Tool ON.
Blinks
230 V: Under voltage; 18 V: Battery too low. Recharge battery.
Glows
Jaws mounting pin not fully engaged. Insert pin.
Blinks
Out of temperature range -10°C to +50°C.
Glows
Service indicator after 30000 cycles. Note: Tool will lock after 32000 cycles.
Blinks
Machine is locked - service after 32000 cycles or after a malfunction.
Red
Yellow
56
Description
RP 330 Series | Pressing
Precision valve control
prevents overpressure.
Electro-hydraulic pressure
system for consistent
32 kN crimping force.
Microprocessor control of
crimp cycles, crimp pressure,
security warnings and
security shutdown.
Flat top for better
accessibility.
Model RP 330-B
Pressure relief valve to
release stuck rollers when
tool is blocked. (e.g. on
corded tools when current
failure occurs).
LED display informs
of status of tool.
Ergonomic designed tool
for well balanced
continuous work.
Tough, impact-resistant
with rubber bumpers for
extra drop protection.
Integral hydraulic pump.
Fully automatic press
operation with return
to start position.
Enhanced gear ratio allows
performance at cold temperatures
(-10°C) and produces more crimps
per charge.
NEW
Model RP 330-C
Li-Ion battery technology,
18 V, 2,2 A or 3,3 A
enabeling more work
per charge.
It is recommended to follow the guidelines
and instructions of the system suppliers
when using Press Fit technology.
57
Pressing | RP 330-B
RP 330-B
Electro-hydraulic Battery Powered Unit
The RIDGID® RP 330-B developed to make press-joints for today’s most common installed metallic-, multilayer and
plastic pipe press fitting systems. Easy to operate, 32 kN pressing power for sizes ranging from 12 to 54 mm or even up
to 108 mm depending on the system.
Microprocessor controlled, powerful motor ensuring consistent crimp cycles. Ergonomic design, well balanced
handling, allowing access to the toughest spots. Electronic monitoring of the jaw’s locking bolt, fully automatic and
standard equipped with the latest battery powered Li-Ion technology.
L
N E W nology
tech
n
o
I
iLi-Ion battery has:
• Less weight: Lighter than Ni-Cad or
Ni-Mh batteries.
• Longer life cycle: more lifetime
working power.
• No memory effect: No need to
discharge before recharging.
Features
• Model: RP 330-B.
• Motor: 18 V, 490 W, 2,2 Ah.
• Capacity: 12 to 108 mm for
systems requiring 32 kN.
• Crimping force: minimum 32 kN.
• Service indication at
30000 cycles.
• Service shutdown after
32000 cycles.
• Sound pressure level: 80 dB (A).
• Operating temperature: -10°C to
+50°C.
• Weight (including battery) 4,4 kg.
58
Battery
Cat.
No.
Model
No.
Weight
kg
28108
28113
28118
28123
28128
28133
28138
28143
RP 330-B
RP 330-B
RP 330-B
RP 330-B
RP 330-B
RP 330-B
RP 330-B
RP 330-B
Case + Machine + Battery + Charger
Case + Machine + Battery + Charger + V 15 - 18 - 22 mm
Case + Machine + Battery + Charger + V 15 - 22 - 28 mm
Case + Machine + Battery + Charger + V 18 - 22 - 28 mm
Case + Machine + Battery + Charger + TH 16 - 18 - 20 mm
Case + Machine + Battery + Charger + TH 16 - 20 - 26 mm
Case + Machine + Battery + Charger + U 16 - 18 - 20 mm
Case + Machine + Battery + Charger + U 16 - 20 - 25 mm
28218
28448
27963
RP 330-B
RP 330-B
RP 330-B
18 V Li-Ion Battery, 2,2 A
18 V Li-Ion Battery, 3,3 A
220 V Charger for 18 V Battery
0,63
0,63
0,72
28208
—
Plastic Carrying Case
4,68
Description
9,80
15,10
15,30
15,30
15,30
15,30
15,30
15,30
Battery Charger
RP 330-C | Pressing
RP 330-C
Electro-hydraulic Powered Unit
The RIDGID® RP 330-C developed to make press-joints for today’s most common installed metallic-, multilayer and
plastic pipe press fitting systems.
Easy to operate, 32 kN pressing power for sizes ranging from 12 to 54 mm or even up to 108 mm depending on the system.
Microprocessor controlled, powerful motor ensuring consistent fast crimp cycles. Ergonomic design, well balanced
handling, allowing access to the toughest of spots. Electronic monitoring of the jaw’s locking bolt, fully automatic.
NEW
Features
•
•
•
•
•
•
•
•
•
•
Model: RP 330-C.
Motor: 230 V, 490 W, 10 A.
Double insulated.
Capacity: 12 to 108 mm for
systems requiring 32 kN.
Crimping force: minimum 32 kN.
Service indication at
30000 cycles.
Service shutdown after
32000 cycles.
Sound pressure level: 80 dB (A)
Weight 4,6 kg.
Operating temperature: -10°C to
+50°C.
Cat.
No.
Model
No.
28158
28163
28168
28173
28178
28183
28188
28193
RP 330-C
RP 330-C
RP 330-C
RP 330-C
RP 330-C
RP 330-C
RP 330-C
RP 330-C
28208
—
Description
Case + Machine
Case + Machine + V 15 - 18 - 22 mm
Case + Machine + V 15 - 22 - 28 mm
Case + Machine + V 18 - 22 - 28 mm
Case + Machine + TH 16 - 18 - 20 mm
Case + Machine + TH 16 - 20 - 26 mm
Case + Machine + U 16 - 18 - 20 mm
Case + Machine + U 16 - 20 - 25 mm
Plastic Carrying Case
Weight
kg
9,30
14,60
14,80
14,80
14,80
14,80
14,80
14,80
4,68
59
Pressing | RP 100-B Compact
RP 100-B Compact
Electro-hydraulic Battery Powered Unit
RIDGID® Pressing Technology™ drives the speed and reliability you need when making pressed connections on Copper,
Stainless Steel, PEX and Multi-Layer Tubing. High Performance RIDGID® Pressing Tools provide repeatable, consistent
joints every time. Whether you are pressing 28 mm Copper or 32 mm Multilayer, RIDGID® offers with the RP 100-B the
right Press Tool that combines weight, power, speed and compactness, for the job.
RIDGID® Pressing Technology for Copper, Stainless Steel,
Multilayer and PEX Tubing Offers:
• Speed - connections made in as little as five seconds, with the fastest
pressing tools in the industry.
• Reliability - electro-hydraulic pressing tools designed with high- end
diagnostics allow better control over the crimping processes,
ensuring the same watertight seal is made with every connection.
The unique monitoring system guarantees that every single pressing
action is made to the tolerances set by the leading system suppliers.
• System Compatibility - pressing tools, jaws and that are designed
in conjunction with the fitting manufacturers, ensuring total system
compatibility.
• Maximum Uptime - battery-powered pressing tool that uses
14,4 Ni-MH batteries, enabling good work-per-charge and use in
extreme temperatures. This pressing tool provides, thanks to the
integral hydraulic pump and a monitored system of recommended
service intervals, a life-cycle of 22000 presses before the tool
requires recalibration.
• E3TM - press tools, designed with Expert-Engineered Ergonomics
for maximum comfort with everyday use.
Jaw head only to be used
with RIDGID ® Compact jaws.
90° jaw rotation.
Performance at
temperatures
(-5°C to +50°C).
Jaw pin safety locking
mechanism prevents tool
from working if not
properly closed.
455 mm
400 mm
• Light weight
280 mm
350 mm
NEW
• Compact size
• Powerful, 24 kN
Features
•
•
•
•
•
•
•
•
•
60
Model: RP 100-B.
Motor: 14,4 V, 325 W, 2,6 Ah.
Capacity: 12 to 32 mm.
Crimping force: minimum 24 kN.
Service indication at
20000 cycles.
Service shutdown after
22000 cycles.
Sound pressure level: 76 dB (A).
Weight incl. battery: 3,4 kg.
Operating temperature: -5°C to
+50°C.
Cat.
No.
Model
No.
22948
22583
22938
22943
24748
RP 100-B
RP 100-B
RP 100-B
RP 100-B
RP 100-B
34461
34471
—
—
14,4 V Battery
Charger for 14,4 V Battery
0,80
0,55
25933
—
Plastic Carrying Case
4,50
Description
Case + Machine + Battery + Charger
Case + Machine + Battery + Charger + V 15 - 22 - 28 mm
Case + Machine + Battery + Charger + RF 16 - 20 - 25 mm
Case + Machine + Battery + Charger + U 16 - 20 - 25 mm
Case + Machine + Battery + Charger + TH 16 - 20 - 26 mm
Weight
kg
8,45
11,50
11,80
11,80
11,80
RP 100-B Compact | Pressing
Pressure relief valve to
release stuck rollers when
tool is blocked.
Microprocessor control of
crimp cycles, crimp pressure,
security warnings and
security shutdown.
LED display informs of
status of tool.
Electro-hydraulic pressure
system for consistent
24 kN crimping force.
Serviceindicator
Ergonomic designed tool
for well balanced
continuous work.
Integral hydraulic
pump. Fully automatic
press operation with
return to start
position.
Error
message
Precision valve control prevents
overpressure.
Readiness
indicator
On / Off
switch
LED display monitored
•
•
•
•
•
Jaw pin closure.
Pressing time.
Oil temperature.
Battery capacity.
Service interval.
Ni-MH battery technology,
14,4 V.
Universal
Compact
Fast
61
Pressing | RIDGID ® Jaws
RIDGID ® Jaws
Complete range available per single jaw, per convenient kit or as a complete package of 3 jaws together with the Press
Fit machines.
RIDGID ® Compact Jaws RIDGID ® Standard Jaws
These Compact jaws are only to be used with the
RIDGID® RP 100-B Pressfit machine.
These Standard jaws are interchangeable with the
RIDGID® and most other common used Pressfit machines.
Original RIDGID® jaws for Viega “Sanpress” and “Profipress” systems.
Cat.
No.
Model
No.
22588
22598
22608
22613
22618
12
15
18
22
28
Description
V 12 mm Compact
V 15 mm Compact
V 18 mm Compact
V 22 mm Compact
V 28 mm Compact
Weight
kg
Cat.
No.
Model
No.
0,94
0,98
1,00
1,00
1,04
83096
83106
83116
83126
83136
83146
83156
83166
12
15
18
22
28
35
42
54
V 12 mm Standard
V 15 mm Standard
V 18 mm Standard
V 22 mm Standard
V 28 mm Standard
V 35 mm Standard
V 42 mm Standard
V 54 mm Standard
1,70
1,72
1,78
1,86
1,92
2,02
2,98
4,28
34221
35381
—
—
V 15 - 18 - 22 - 28 mm Standard Set (in Plastic Case)
V 12 - 15 - 22 - 28 mm Standard Set (in Plastic Case)
8,40
8,40
Weight
kg
Description
RIDGID® jaws for TH pressfit systems. (Henco, Bampi, Comap, Dalpex, Eurotherm, Giacomini, Tiemme, Viessmann, FAR, RB
and others)
Cat.
No.
Model
No.
24708
24713
24718
24723
24728
24733
24738
14
16
18
20
26
32
32HE
Description
TH 14 mm Compact
TH 16 mm Compact
TH 18 mm Compact
TH 20 mm Compact
TH 26 mm Compact
TH 32 mm Compact
TH 32 mm* Compact
Weight
kg
Cat.
No.
Model
No.
1,16
1,16
1,16
1,16
1,40
1,36
1,36
86536
86546
86556
86566
86576
86586
86596
14
16
18
20
26
32
32HE
35331
—
* For Henco Systems.
Weight
kg
Description
TH 14 mm Standard
TH 16 mm Standard
TH 18 mm Standard
TH 20 mm Standard
TH 26 mm Standard
TH 32 mm Standard
TH 32 mm* Standard
1,70
1,72
1,78
1,86
1,92
2,02
2,98
TH 16 - 18 - 20 - 26 mm Standard Set (in Metal Case)
8,40
* For Henco Systems.
RIDGID jaws for U pressfit systems. (Uponor, Wavin, CO.E.S, FAR, NUPI and others)
®
Cat.
No.
Model
No.
22908
22913
22918
22923
22928
22933
14
16
18
20
25
32
Description
U 14 mm Compact
U 16 mm Compact
U 18 mm Compact
U 20 mm Compact
U 25 mm Compact
U 32 mm Compact
Weight
kg
Cat.
No.
Model
No.
1,04
1,04
1,04
1,04
1,30
1,26
86616
86626
86636
86646
86656
86666
14
16
18
20
25
32
U 14 mm Standard
U 16 mm Standard
U 18 mm Standard
U 20 mm Standard
U 25 mm Standard
U 32 mm Standard
1,70
1,72
1,78
1,86
1,92
2,02
35341
—
U 16 - 18 - 20 - 25 mm Standard Set (in Metal Case)
8,40
Description
Weight
kg
RIDGID® jaws for RF pressfit systems. (Blansol, Saneper, Fittings Estandar and others)
Cat.
No.
Model
No.
22863
22878
22883
22903
16
20
25
32
Description
RF 16 mm Compact
RF 20 mm Compact
RF 25 mm Compact
RF 32 mm Compact
Weight
kg
1,04
1,04
1,30
1,26
Carrying cases and Fittings Bag
Cat.
No.
87956
84276
25928
24913
62
Description
Case (Metal) for Standard jaws
Case (Plastic) for Standard V jaws
Case (Plastic) for Compact jaws
606 JobMax Fittings Bag
Weight
kg
4,32
1,30
1,60
1,00
RIDGID® Compact Jaws
The RIDGID® JobMax Fittings Bag is ideal for
transporting fittings (center compartment with six
pockets) and small hand tools (three outside pockets).
RIDGID® Standard Jaws
Download PDF