Seiko | 201 | QUARTZ TIMER

QUARTZ TIMER
CONTENTS
SPECIFICATIONS
Input power supply
AC 100V-120V, AC 200V-240V, 50/60Hz
Power consumption
10W
Power failure backup
Clock : 10 hours, program : 2 weeks
Operating temperature range
−10℃∼+50℃
Time accuracy
Within 5 sec./month
Signal output
Independent 2 channels
Contact out put capacity
AC 125V, 5A or AC 250V, 3A, DC 30V, 5A
Program setting range
Set in one-minute increments
4 melodies are
preset for
hourly time signal.
Westminster Bell : Approx.36sec.
Baby Elephant Walk : 36sec.
Music Box Dancer : 36sec
Edelweiss : 42sec.
Built in speaker
500 mW
Line output
150 mV (47k)
Melody output
QBT-20 I
An Intelligent Timer for Offices, Schools,
Factories, etc. Melody Time Signal Can be
Programmed for Up to One Week.
Dimensions
Highly functional timer for office, school, factory,
etc., with a weekly melody time signal program
The QBT-201 offers 4 refreshing melodies for hourly time signals,
and different melodies can be used at the beginning of the work
day, lunch hour, end of the day, etc. Up to 60programs can be set
on QBT-201. Its superior function and sophisticated design make it
a necessity for any office.
4 built-in melodies
372(W)×270(H)×62.4(D)mm, Approx. 2kg,
Dial diameter : φ249.5mm
2channels are available for external equipments.
Not only playing the melodies at any desired time, but also
controlling external equipment by using 2 channels for signal
output, for example.
● to
broadcast a melody outside by connecting external amplifier and speakers
sound an external buzzer or siren by connecting external amplifier and
speakers
● to turn on/off night light
● to turn on/off air conditioner
● to control water facilities
● to
You can select one of four melodies to use as a time signal.
Weekly programming
Design
Up to 60 programs can be set on the timer. Even if you need a
different time table everyday, you can set programs for one
week.
A sophisticated exterior with easy-to-read dial.
[EXAMPLE 1] For controlling external equipment
10:00
Illuminate a show window
20:00
Turn off an illumination in a show window
8:00
Turn on an air-conditioning equipment
19:00
Turn off an air-conditioning equipment
[EXAMPLE 2] For using 4 preset melodies
9:00
Playing "Westminster Bell" at the start of work
12:00
Playing "Edelweiss" at the start of lunch hour
13:00
Playing "Baby Elephant Walk" at the end of lunch hour
17:00
Playing "Music Box Dancer" at the end of work
Amplifier
(option)
Speaker
(option)
11-12, Nihombashi-Tomizawacho, Chuo-ku, Tokyo 103-8470, Japan
Phone : (+81) 3-5695-1201 / Fax : (+81) 3-5695-1202
URL http://www.seiko-sts.co.jp
2004.8 TO
SYSTEM CLOCKS
Catalogue
PROGRAMMABLE MASTER CLOCK
WALL-MOUNT TYPE
CONTENTS
SPECIFICATIONS
Model No.
Number of channels for secondary clocks
One (1)
Two (2)
4.194304MHz
Accuracy weekly rate
Within ±0.7 sec./week (+5℃∼+35℃)
Master clock
Digital (24-hour indication system)
(Remains blank during the power failure)
Hour, minutes, seconds, day of week
Or Year, month, date, day of week
Clock monitor
2 hands
(correspondingly with the digital clock)
Master clock
Setting is made by switches on the control
panel
Clock monitor
60∼ fold automatic fast forward device
with pulse duration compensation
Time setting
Daylight Saving Time
Signal for drive
Secondary
clock
drive
Control outputs for secondary clocks and
independent peripheral devices. The SEIKO
Programmable Master Clocks not only control
secondary clocks precisely for synchronized time
keeping, but they can also be programmed to
sound a chime. Furthermore the SEIKO QT3810/3820 can automatically turn on and off air
conditioning equipment, illuminations, etc.
for energy savings, and can also control crime
prevention equipment for manpower savings.
Use these master clocks in offices, schools,
factories, stores, banks, etc.
QT-3820/M
Crystal oscillation
Time display
QT-38 I 0/M
QT-3820/M
QT-3810/M
DC24V 30sec. polarized pulse Pulse
duration 0.5sec. non-contact signal
30pcs.
Maximum number
of
secondary clocks
60pcs.
(12mA/pcs. 30pcs/channel)
Maximum output
capacity
360mA
720mA
Battery
DC24V Ni-cd
Battery protection
Circuit of protecting over-discharge
Power supply
AC
Power consumption
Battery backup
Setting is made by a marksheet (card).
35W
45W
Program
3 years (memory for program)
Master clock
60 hours (Digital display remains blank
during the power failure)
Secondary clocks
30 hours
Operating temperature range
−10℃∼+50℃
Case
Front : ABS and steel plate, Pearl gray Y8/0.5
Back : Steel plate, Black
Program setting
Marksheet system
30×108
Weekly program
Max. 7 patterns
Special program
Max. 59 patterns
Year program
Setting specify day of the year
Temporaly program
Setting temporaly program of the week
Program
Back panel
inlet hole
250
55
1000 programs
Pronunciation method
Monaural voice by frequency modulation
oscillator LSI
Selection method
Every setting and set time can be selected
with the program card.
Name of a song
1. Westminster Bell
2. Edelweiss
3. Melody of small love
4. The Sting's theme
Line output
150mVrms (10kΩ)
Monitor output
Internal speaker. Ratings output 0.2W
Audio amplifier control
Use one channel of the program timer output.
It is possible to see the start delay time.
397
40
Maximum Program
Chime Unit
5. Chim Chim Cher-ee
6. Bibbidi Bobbidi Boo
7. Shinko peitid clock
8. Yuuyake Koyake
MON
420
1
MASTER CLOCK
CONTENTS
SPECIFICATIONS
Accuracy
Within ±0.2 sec./day (+5℃∼+35℃)
Monitor
Analogue clock with second inidication
(Red LED)
Output signals
A : 30-sec. polarized for secondary clocks
B : 1-min. non-polarized for peripheral equipment
C : 1-sec. non-polarized for peripheral equipment
Output capacity
A+B : 600mA
C : 10mA
Pulse length
A, B, C : 500ms
Output voltage
A, B : DC12V
C : Open collector
AC input
100∼250V±10%
Voltage selector“H”
and“L”
DC input
22∼35V
Ripple : less than 1 V peak to peak, Max. 2A
Protector
Fuse provided
Built-in Battery
During a power failure, the monitor clock, all
secondary clocks and LED lamp will stop.
They will be corrected automatically after
power is resumed.
Highly stabilized quartz oscillator guarantees
remarkable precision for the whole system.
Guaranteed
duration
Approx. 10∼12 hours
Large capacity
Battery
Ni-Cd
Indication of
power failure
LED lamp off
Method
Automatic pulse control
Speed
30 times faster than nomal
Manual
0 second setting swith provided
Dimensions
300(W)×320(H)×115(D)mm
Weight
5.0kg
Output
QC-6A
Power Supply
High accuracy
Up to 50 secondary clocks can be linked to the master
clock.
Flexible voltage transformer
No more voltage fluctuation thanks to a new power
supply circuit.
Built-in battery
Correction
of Time
Back-up power supply for the master clock.
Automatic re-adjustment
Even during power failure, all the secondary clocks are
driven by the optional battry unit B-450(stand-by
battery unit B-450 for secondary clocks optionally
available).
Setting the Time
AC/DC operation
Operates on either AC or DC power supply.
How to Drive Secondary Clocks
30sec.
Accuracy and Synchronization of
Secondary Clocks
The role of the secondary clock in a time-keeping system is to
accurately reproduce the time signal supplied by the master
clock. The master clock and secondary clocks are connected
electrically, and the quartz oscillation frequency of 4.194304
MHz/sec. from the master clock is reduced in several stages
by the frequency diving LSI and finally transmitted to the
secondary clock as a 30-sec. polarized signal of ±24 V DC.
The secondary clock converts this electrical signal into
mechanical energy and, with the same precision as the master
clock, simultaneously displays the correct time.
Positive position
30sec.
30sec.
Negative position
t
+24V
−24V
t
t
Neutral position
2
INDOOR SECONDARY CLOCKS (24V)
WALL TYPE/ROUND TYPE
Power consumption of a wall type secondary clock is 12mA. Input signal of a wall type secondary clock is 30 sec. polarized signal/DC 24 V.
260-mm Diameter Round Type
SC-200C
SC-20I
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Cream
Thickness ── 40mm
Weight ─── 1.0kg
Dial ──── Aluminum, Silver
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Semi-mat black
Thickness ── 40mm
Weigh ─── 1.0kg
300-mm Diameter Round Type
310-mm Diameter Round Type
SC-304
SC-306
Dial ──── Brass,
White hairline finish
Hour marker ─ Brass, Black
Hands ─── Aluminum, Black
Outer Frame ─ Polished chromium finish
Thickness ── 46mm
Weight ─── 2.0kg
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Cream
Thickness ── 40mm
Weight ─── 1.5kg
SC-300
SC-300C
SC-302
310-mm Diameter Round Type
(cream color) is also available.
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Thickness ── 40mm
Weight ─── 1.5kg
SC-305
Dial ──── Aluminum, Silver
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Semi-mat, Black
Thickness ── 40mm
Weight ─── 1.5kg
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel cream
Thickness ── 40mm
Weight ─── 1.5kg
SC-3 I 6
SC-3 I 6C
(cream color) is also available.
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, White
Thickness ── 40mm
Weight ─── 1.5kg
410-mm Diameter Round Type
SC-400
SC-400C
(cream color) is also available.
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Thickness ── 55mm
Weight ─── 2.5kg
3
SC-4 I 9
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, White
Thickness ── 55mm
Weight ─── 2.5kg
SQUARE TYPE/DOUBLE-FACED SUSPENDED TYPE
Power consumption of a wall type secondary clock is 12mA. Input signal of a wall type secondary clock is 30 sec. polarized signal/DC 24 V.
Power consumption of a double-faced secondary clock is 24mA.
Square Type with Standard Frame
SC-320
SC-320C
(cream color) is also available.
Dimensions ─ 310W×310H×45Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Weight ─── 2.0kg
SC-323K
Dimensions ─ 310W×310H×75Dmm
Dial ──── Cloth covered, Black
Hour marker ─ Blass, White hair-line finish
Hands ─── Blass, White hair-line finish
Frame ─── Steel, Cream
Speaker ── Max. input 4W
With output transformer
Input impedance : 7kΩ
Output impedance : 8kΩ
Weight ─── 2.0kg
SC-324
SC-420C
Dimensions ─ 310W×310H×45Dmm
Dial ──── Aluminum, Silver
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Semi-mat black
Weight ─── 2.0kg
Dimensions ─ 400W×310H×55Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Cream
Weight ─── 2.5kg
SC-422K
Dimensions ─ 400W×310H×75Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Cream
Speaker section─ Cloth covered, Black
Speaker ── Max. input 4W
With output transformer
Input impedance : 7kΩ
Output impedance : 8kΩ
Weight ─── 3.0kg
Square Type with Wood Finish
SC-322
SC-42 I
Dimensions ─ 300W×210H×45Dmm
Dial ──── Wood, Walnut finish
Hour marker ─ Brass,
White hairline finish
Hands ─── Brass,
White hairline finish
Weight ─── 1.0kg
Dimensions ─ 420W×295H×45Dmm
Dial ──── Wood, Walnut finish
Hour marker ─ Brass,
White hairline finish
Hands ─── Brass,
White hairline finish
Weight ─── 1.5kg
Double-faced Suspended Type
SC-360
Dimensions ─ 312mm Dia×150Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Pipe ──── 34mm Dia×360Dmm
Weight ─── 8.0kg
4
DOUBLE-FACED BRACKET TYPE/RECESSED TYPE
Power consumption of a double-faced secondary clock is 24mA. Power consumption of a double-faced secondary clock is 12mA.
Double-faced Bracket Type
SC-460
Mounting Structure
Dimensions ─ 400W×310H×180Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Flange ─── 250W×50H×100Dmm
Weight ─── 8.0kg
Dimensions ─ 400W×310H×180Dmm
Dial ──── Steel, White
Hour marker ─ Black
Hands ─── Aluminum, Black
Frame ─── Steel, Gray
Flange ─── 50W×250H×100Dmm
Weight ─── 8.0kg
400
70 ±3
50
Recessed Type
Sharp, straight-bar type hour marker
SC-340
SC-440
Mounting Structure
Movement cover ─ Brass, White hairline finish
Hour marker ── Brass, White hairline finish
Hands ──── Brass, White hairline finish
BINDING AGENT
*SC-340 : 300mm diameter(1.0kg)
*SC-440 : 400mm diameter(1.2kg)
Straight-bar type, with numerals for the
quarter-hours
119φ
89
Movement cover ─ Brass, White hairline finish
Hour marker ── Brass, White hairline finish
Hands ──── Brass, White hairline finish
Weight ──── 1.0kg
110φ
SC-34 I
12
Circular type hour marker
SC-342
SC-44 I
Movement cover ─ Brass, White hairline finish
Hour marker ── Brass, White hairline finish
Hands ──── Brass, White hairline finish
13
5
JIS C8336 SQUARE OUTLET BOX (WITH COVER)
*SC-342 : 300mm diameter(1.0kg)
*SC-441 : 400mm diameter(1.2kg)
Option Equipment for Secondary Clocks
FA-300
FA-30 I
Specification
Hand Adjuster with jack plug
Jack-plug plate for single-faced clocks
Built-in battery
Operating time
Among secondary clocks driven by a master clock, the
FA-300 is used for adjusting the hands of a large-sized
secondary clock mounted on a wall in a very high
position. By the signal from the FA-300, the clock is
adjusted apart form a signal from a master clock.
5
FA-302
Jack-plug plate for double-faced clocks
── 4006P, 9V×3=27V
── Approx. 100 minutes
(2,000 Ω load)
Hand moving speed Approx. 30 times
Output terminal ── Jack plug type
Frame ───── Steel, Gray
250
200
2-3/8" ANCHOR BOLTS
310
SC-46 I
JIS C8336 SQUARE OUTLET BOX (WITH COVER)
DIGITAL CLOCKS
INDEPENDENT CLOCK
For indoor / outdoor rain proof Type
CONTENTS
SPECIFICATIONS
Model No.
RBC-200N
(Wall type)
RBC-302N, 303N
(Dobule-faced type)
Digit height
200mm(Orange)
200mm(Yellow)
RBC-200N
Dimensions
Wall type
Weight
950W×380H×184Dmm 950W×380H×300Dmm
Accuracy
Within ±0.2 sec./day at normal temperature
Operational temperature range
RBC-302N
Suspended type (Double-faced)
−20℃ ∼ +60℃
Input power
AC(50/60Hz)
Time synchronization with the master clock is possible.
Current consumption
Approx. 1.6A
(Including 0.7A for
internal illumination)
Internal illumination
FL-32W×1 (With automatic flasher)
Power failure compensation
Approx. 10hours
Steel, Metallic brown
Front : Transparent glass (Thickness : 3mm)
Case
Bracket type (Double-faced)
Approx. 1.9A
(Including 0.7A for
internal illumination)
Magnetic inversion system
Changeover between 12-and 24-hour indications
Display
RBC-303N
65kg
30kg
*Please turn off the illuminating lightwhile the clock is shone directly by the sun in the daytime.
For Indoor Type
CONTENTS
SLC- I 00W
SPECIFICATIONS
Model No.
SLC-100W(Wall type)
SLC-102W(Double-faced type)
SLC-120E(Wall type)
SLC-122E(Double-faced type)
Digit height
100mm (White)
120mm(Orange)
Wall type
620W×170H×60Dmm
670W×200H×60Dmm
Double-faced
626W×176H×170Dmm
676W×200H×170Dmm
Wall type
3.5kg
3.8kg
Double-faced
12.5kg
13.5kg
Wall type
Dimensions
SLC- I 20E
Weight
Wall type
Accuracy
Within ±0.2 sec./day at normal temperature
Operational temperature range
AC(50/60Hz)
Time Synchronization with the master clock is possible.
Input power
SLC- I 02W
Suspended type (Double-faced)
−10℃ ∼ +50℃
Wall type
Approx. 0.1A
Approx. 0.2A
Double-faced
Approx. 0.2A
Approx. 0.4A
Current
consumption
Display
Case
White/Orange LED
Changeover between 12-and 24-hour indications
Plastic, Yellowish white
SLC- I 22E
Suspended type (Double-faced)
*A hand adjuster is optional.
6
WEEKLY DIGITAL CLOCKS
Mounting Structure
40
125
260
10
WDC-402
Display ─── LED(White)
Digital height ─ Time : 40mm, Day : 10mm
In addition to its single usage, this weekly
digital clock is uniquely designed in such a
way that it can form an original world time
clock by applying multiple units. No need for
a master clock since it is a twin synchronous
system. (A power box is required when
multiple clocks are used to form a world time
clock.) The installation can be either wall
type or recessed type. And a map panel of
your design can be prepared on request.
30
34
96
JISA
WEEK
HOUR
MIN
SEC
Configuration of Weekly Digital Clock (Simple substance)
DC24V
30sec. polarized signal
Local Voltage
(AC100V~240V)
Time synchronization
with master clock
Earth
Configuration of Weekly Digital Clock (Plurality)
AC 100V∼ 240V
Wiring
WDC-402
No.N
7
WDC-402
WDC-402
No.3
No.1
WDC-402
WDC-402
No.4
No.2
Earth
OUTDOOR CLOCKS
LARGE-SIZED WALL CLOCKS (OUTDOOR/RAINPROOF)
Dial of a large-sized clock is made of steel except for internal illumination type which is made of acrylic resin. Input signal of a wall type secondary clock is 30 sec. polarized signal/DC 3.6 V.
Cost for installation work is not included. Power consumption of φ550-and φ700-mm types is 18 mA, and that of φ900-and φ1,000-mm types is 60 mA.
550-mm Diameter
900-mm Diameter
FC-503
FC-903
Frame ─── Steel,
Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 90mm
Weight ─── 4.7kg
Frame ─── Steel,
Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 150mm
Weight ─── 21kg
700-mm Diameter
1000-mm Diameter
FC-703
FC- I 03
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 99mm
Weight ─── 7.5kg
Frame ─── Steel,
Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 150mm
Weight ─── 25kg
FC-7 I 3 I
Internal illumination type
Thickness ── 170mm
Weight ─── 11.5kg
All the other specs.
are the same as those of FC-703.
FC-707
FC- I 08
Frame ─── Stainless steel polished
Cover glass ─ Polycarbonate
Thickness ── 99mm
Weight ─── 7.0kg
Frame ─── Stainless steel polished
Cover glass ─ Polycarbonate
Thickness ── 150mm
Weight ─── 25kg
FC-7 I 7 I
Internal illumination type
Thickness ── 170mm
Weight ─── 10.7kg
All the other specs.
are the same as those of FC-707.
FC-7 I 9 I
Internal illumination type
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 170mm
Weight ─── 11.5kg
Protector for 700-mm outdoor wall clock
Configuration of Large-Sized Wall Clock
TK-S2
Frame ─── Stainless steel,
Coffee brown color
Photo example : TK-S2 furnished on
FC-703.
Clock
Wiring
AC power
Controller
8
LARGE-SIZED DOUBLE-FACED POLE CLOCKS (RAINPROOF)
Cost for pole and installation work are not included. Input signal of a pole clock is 30 sec. polarlized signal/DC3.6 V. Power consumption of a pole clock is 18mA×2.
700-mm Diameter
Grounding Work (mm)
Clock Unit
φ700
300
Internal illumination type
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 300mm
Weight ─── 20kg
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 300mm
Weight ─── 20kg
4,360
FC-785 I
Internal illumination type
Pole
5,300
FC-783 I
Overall Length of Pole
φ89.1
φ139.8
Clock Controller
950
G.L.
Concrete
Rubble
Glass 3
Grounding
□1000
(GND)
(Pole and base are shown here for reference purpose only.)
Controller
FC-787 I
FC-789 I
Internal illumination type
Internal illumination type
Frame ─── Stainless steel
Cover glass ─ Polycarbonate
Thickness ── 300mm
Weight ─── 18.5kg
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 300mm
Weight ─── 20kg
LARGE-SIZED SUSPENDED TYPE CLOCK
(OUTDOOR/RAINPROOF)
700-mm Diameter
FC-763 I
When installing a secondary
clock, a controller for exclusive
use with it is required (optional).
QP-BOX
Digital Regulation
Gain or loss of the clock controller can be detected and corrected
automatically by every zero-setting operation if conducted at regular
intervals. This function is called the digital regulation.
Error
Without digital regulation
Double-faced type with internal illumination
Frame ─── Steel,
Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 300mm
Weight ─── 21kg
Input voltage─ DC 3.6V
Current ─── 18mA×2
consumption
Controller Case
With digital regulation
Time
Zerosetting
Zerosetting
Zerosetting
Zerosetting
Remarks:
In case that an output voltage from a master clock is DC 24 V (except QC-6A), you
need a resistor adaptor R-700 or R-900 (optional) which has to be connected
between the FC-series and the master clock.
9
SOLAR-POWERED CLOCKS
Wall Type : Cost for installation work is not included. Double-faced Pole Type : Cost for pole and installation work are not included.
Wall Type
Configuration of
Wall Type Solor Clock
Solar Cell Panel
Clock
Wiring
QF-503
QF-703
QF-707
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 90mm
Weight ─── 4.7kg
Frame ─── Steel, Coffee brown color
Cover glass ─ Polycarbonate
Thickness ── 99mm
Weight ─── 7.5kg
Frame ─── Stainless steel
Cover glass ─ Polycarbonate
Thickness ── 99mm
Weight ─── 7kg
Double-faced Pole Type
Solar Clock
Controller
Controller
Controller Case
When installing a secondary
clock, a controller for exclusive
use with it is required (optional).
QP-BOX
Grounding Work (mm)
300
Solar Cell Panel
FC-783
Frame ─── Stainless steel
Thickness ── 300mm
Weight ─── 18kg
Frame ─── Steel, Coffee brown color
Thickness ── 300mm
Weight ─── 19.5kg
φ700
Clock Unit
FC-787
4,360
Pole
5,300
Overall Length of Pole
φ89.1
φ139.8
Clock Controller
G.L.
950
Concrete
Rubble
FC-785
FC-789
Frame ─── Steel, Coffee brown color
Thickness ── 300mm
Weight ─── 19.5kg
Frame ─── Steel, Coffee brown color
Thickness ── 300mm
Weight ─── 19.5kg
Glass 3
Grounding
(GND)
□1000
(Pole and base are shown here for reference purpose only.)
10
Download PDF