DMP Electronics | eBox-4 Series | Specifications | DMP Electronics eBox-4 Series Specifications

DM&P Group
eBox-4 Series
Manual
(Revision 1.0)
COPYRIGHT
The information in this manual is subject to change without notice for continuous
improvement in the product. All rights are reserved. The manufacturer assumes no
responsibility for any inaccuracies that may contain in this document, and makes no
commitment to update or to keep current the information contain in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole
or in part, in any form or by any means without the prior written permission of the DMP
Electronics Inc
©Copyright 2007 DMP Electronics Inc
Manual No. IUMEBOX4000-01 Ver.0.1
Revised Date : Jul, 2007
1st Issued Date : Jul, 2007
SPECIAL NOTICE TO USERS
DMP ELECTRONICS INC PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE
SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE
WITH REGARD TO THIS MANUAL, THE SOFTWARE, OR SUCH OTHER INFORMATION. IN NO
EVENT SHALL DMP ELECTRONICS INC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR
SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF
OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED
HEREIN OR THE USE THEREOF.
DMP Electronics Inc reserves the right to make any modification to this manual or the
information contained herein at any time without notice. The software described
herein is governed by the terms of a separated user license agreement or label sticker.
This product contains software owned by DMP and licensed by third parties. Use of
such software is subject to the terms and conditions of license agreements enclosed
with this product. Software specifications are subject to change without notice and
may not necessarily be identical to current retail versions.
Updates and additions to software may require an additional charge. Subscription to
online service providers may require a fee and credit card information. Financial
services may require prior arrangements with participating financial institution.
eBox-4
i
www.compactpc.com.tw
TRADEMARKS ACKNOWLEDGMENT
eBox-4800, eBox-4850, eBox-4851, eBox-4852, eBox-4853 and eBox-3854
are the registered trademarks of DMP Electronics Inc.
Microsoft®, Windows® and AMI are registered trademarks of Microsoft
Corporation and American Megatrends, Inc. in the United States and/or
other countries respectively.
Other brand names, product names or trade names appearing in this
document are the properties and registered trademarks of their respective
owners. All names mentioned herewith are served for identification purpose
only.
OWNER’S RECORD
The serial number of this product is located at the rear panel of your eBox4 Compact PC series. Refer to the model and serial number when you
contact your nearest dealer or DMP offices for services. The Model No. of
this product is also indicated on the product label of your gift box as:
eBox-4800, eBox-4850, eBox-4851, eBox-4852, eBox-4853 and eBox-4854.
eBox-4
ii
www.compactpc.com.tw
SAFETY INFORMATION
WARNING
Do not expose your computer to rain or moisture, in order to prevent
shock and fire hazard.
Never install your computer in wet locations.
Do not open the cabinet to avoid electrical shock. Refer to your nearest
dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power adaptor
and display monitor are disconnected.
Locate your computer as close as possible to the socket outline for
easy access and to avoid force caused by entangling of your arms with
surrounding cables from the computer.
When using eBox-4, avoid using or installing the modem to the serial
port during a storm or a lightning.
Do not use the modem or a telephone to report a gas leak in the vicinity
of the leak.
USB connectors are not supplied with Limited Power Sources.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(ENCASING) OF THIS PRODUCT. PLEASE CONTACT YOUR
NEAREST DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN.
eBox-4
iii
www.compactpc.com.tw
REGULATORY
FCC CLASS A NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference in which case the user will be required to correct the interference at his own
expense. Testing was done with shielded cables. Therefore, in order to comply with the FCC
regulations, you must use shielded cables with your installation.
WARNING
This product Complies with EN55022 Class A. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the interference - causing equipment standard entitled “Digital
Apparatus”, ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe (A) prescrites dans la norme sur le matériel brouilleur: “Appareils
Numériques”,NMB-003 édietée par le miniistre des Communications.
MANUFACTURER’S DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the requirements of European
Community Council Directives 89/336/EEC and 73/23/EEC relating to electromagnetic
compatibility and product safety respectively.
ATTENTION
This product has been designed and certified to comply with certain regulatory requirements
pertaining to Information Technology Equipment. This product has not been designed for use
as a medical device. Without limitation of the foregoing, this product is not intended and has
not been certified for use in a hospital or clinical environment to diagnose, treat, or monitor
patients under medical supervision, and is not intended and has not been certified to make
physical or electrical contact with patients, nor to transfer energy to or from patients and/or to
detect such energy transfer to or from patients.
eBox-4
iv
www.compactpc.com.tw
PURCHASE AGREEMENT
Version 1.1 – 2002/11/19
PURPOSE:
In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the
agreement for the protection for both parties, DMP and Users in pursuant of trading.
PRODUCT DESCRIPTION :
With this product, herewith also known as eBox-4, which is a simplified & an economical design of an
embedded computer for Special Purpose Personal Computing. The basic specification of this product
comprises of the latest x86 technology design, and comes in 3 different speed version, which runs at a
speed of 1.2GHz, with onboard 512MB System memory, Display, USB, Keyboard, PS2 Mouse, LAN, and
Audio Interfaces.
DISTRIBUTION CONVENTION:
1. This Product includes a Gift box, an inner case, a eBox, a Power adaptor, Allen ranch & Drivers
CD, and IDE cable (special eBox-4 configuration do not have the IDE cable). Upon receiving
this product, kindly please refer to the User’ Manual to check for the contents and appearance
of this product; contact immediately your nearest dealer or DMP office for any defective or
missing parts. The supplier will not be responsible for any reported discrepancy thereafter the
expiration period of 3-days from the date of purchase.
2. In consideration of transportation and the cost of storage, the supplier provides to the
distributors a warranty of 12-months. This warranty covers the failure caused by hardware
breakdown (excluding hard drives), but does not cover the act of misuse and mishandling.
3. The supplier will not accept unknown post, therefore if you wish to repair or to return your goods
– kindly please contact your nearest dealer to make your declaration, and at the same time,
apply for a RMA number (RMA stands for Return Merchandise Authorization – please see the
RMA form and fill-up for authorization).
4. The freight for Return goods for repair will follow the International customary practice and
convention: Both parties is to pay for freight of one shipment each. The shipper is required to
prepaid the freight from the place of origin (This means that the Returnee (user) covers the
freight for return goods, while the Supplier covers the freight for goods after the repair).
5. Obsolete warranty is referred to as: (1)Expiration of warranty or (2)Damage due to misuse
within warranty. The Supplier will be taken into consideration of the circumstances, to provide
repair service with charges expense for obsolete warranty. This expense includes the cost of
material and the cost of labor.
NOTE:
If there is other particular issue not listed in the above conditions, both parties agreed to follow the
General Law of Commerce with fair and reasonable discussion in handling and resolving the
argument.
eBox-4
v
www.compactpc.com.tw
Table of Contents
CHAPTERS – HEADING
PAGE NO.
0 – UNPACKING YOUR EMBEDBOX ......................................................... 1
` PACKING LIST ............................................................................... 1
` CHECK BEFORE USE ..................................................................... 1
1 – PREFACE ........................................................................................ 2
2 – eBOX-4800 OVERVIEW ................................................................... 3
eBOX-485X OVERVIEW ................................................................... 4
3 – EMBEDDED CPU BOARD .................................................................. 5
` SYSTEM SPECIFICATION ................................................................ 5
4 – PERIPHERALS ................................................................................... 6
` CONNECTING THE POWER ADAPTOR ............................................. 6
` CONNECTING THE MONITOR .......................................................... 6
` CONNECTING THE USB ................................................................. 7
` CONNECTING USB, SPEAKER/EARPHONE & WEB ......................... 7
` CONNECTING THE KEYBOARD AND MOUSE .................................... 8
5 – BIOS ............................................................................................... 9
` RECONFIGURING eBox-4 ............................................................. 9
6 – TECHNICAL SPECIFICATION ............................................................. 10
7 – TAKING CARE YOUR COMPUTER ..................................................... 11
` STORING ..................................................................................... 11
` USING CABLES FOR CONNECTION ............................................... 12
` CLEANING YOUR COMPUTER ...................................................... 12
8 – TROUBLESHOOTING ........................................................................ 13
` TROUBLESHOOTING YOUR EBOX .................................................. 13
` COMPUTER DOES NOT START ....................................................... 13
` BIOS ERROR MESSAGE .............................................................. 13
` “OPERATING SYSTEM NOT FOUND” ............................................. 14
eBox-4
vi
www.compactpc.com.tw
APPENDIX : ONBOARDCONNECTORS SUMMARY ..................................... 15
` REAR CONNECTORS OUTLINE FOR eBOX-4800 .......................... 15
` REAR CONNECTORS OUTLINE FOR eBOX-4850 ..........................
` REAR CONNECTORS OUTLINE FOR eBOX-4851 ..........................
` REAR CONNECTORS OUTLINE FOR eBOX-4852/53 .....................
` REAR CONNECTORS OUTLINE FOR eBOX-4854 ..........................
15
16
16
17
` PIN ASSIGNMENTS ...................................................................... 18
WARRANTY : TERMS AND CONDITION ................................................... 20
1 WARRANTY ................................................................................ 20
2 SERVICE AND SUPPORT .............................................................. 20
3 RETURN MERCHANDISE AUTHORIZATION (RMA) POLICY ............. 20
4 SHIPPING POLICY ........................................................................ 20
eBox-4
vii
www.compactpc.com.tw
0
UNPACKING YOUR EBOX
Congratulation! You have just acquire eBox-4, the world’s smallest and
compact PC (See Figure 1), please check the following items:
PACKING LIST FOR eBOX-4 SERIES
Item
Description
Q’ty
c
d
eBox-4
Max. 20-watts External Power Adaptor, Vin: 100~240VAC •
60/50Hz, 1.0A / Vout:: +5.0~5.25VDC @ 4A max. LPS
Drivers CD for eBox-4
User’s Manual
x1
x1
e
f
x1
x1
* Note: The accessories are subject to change without immediate notice.
CHECK BEFORE USE
c eBox-4 EmbedBox
eBox-4
d AC Power Adaptor
e Drivers CD
1
1
PREFACE
eBox-4 : SLIM, MINI BUT POWERFUL COMPUTER
DMP introduces an industrial classic in the computing industry, by featuring eBox-4, a
chef d’oeuvre compact PC that connects people through networking via global internet
across the continents over the channels of sea bay. The conquest for browsing einformation through wired LAN/WAN. This portable device is handy for travelers and
service technicians who worked in and out of the office. For office desk workers, this
showpiece occupies very little space on a corner of the table, and it is so convenient
that you may lock it in your drawer after office hours.
A jewel in the crown eBox for thin client users, which is handy-rugged-robust. eBox-4
serves as the Internet Appliance that offers state-of-art design for applications
surrounding networking, computing, transaction and information transport.
DMP connotes the eBox-4 for small business enterprises to serve these boxes to
users for the connection to a server as thin client. The eBox achieves multi-servers
requirement to serve as firewall, mail-server, print server, and many other single task
application in the office. Furthermore, with eBox-4, business executive can work his
way from the office to home, a student can do his assignment from the dormitory and
continue back at home. eBox-4 allows you to use your computer with just one finger
press at the power button. It is built in an awesome mechanical dimension of
170×124×38mm(or 56mm), this is just a right device for space conscious environment.
eBox-4
2
2
eBOX-4800 OVERVIEW
Front Panel
Power LED
The power LED lights up, when system
is turn on.
HDD LED
The HDD LED flashes when the system
is working. Please do not turn off the
system when HDD start running
Power Switch
Depress switch to turn on & turn off the
systems.
USB port
For connection to devices with USB
interface (keyboard, mouse, HDD, CDROM, Memory Stick, etc.)
eBox-4
3
eBOX-485x Overview
Front Panel
Power LED
The power LED lights up, when system
is turn on.
HDD LED
The HDD LED flashes when the system
is working. Please do not turn off the
system when HDD start running
Power Switch
Depress switch to turn on & turn off the
systems.
USB port
For connection to devices with USB
interface (keyboard, mouse, HDD, CDROM, Memory Stick, etc.)
eBox-4
4
3
ABOUT EMBEDDED CPU BOARD
SYSTEM SPECIFICATION
CPU
VIA Esther 1.2GHz
North/South Bridge
VIA CX700M
Main Memory
512MB DDR2
BIOS
“Plug and Play” function, auto-search
new apparatuses inset.
Provide DMI for system management.
Advanced ACPI configuration and power
control interface. ( intelligence control
system.)
VGA
AGP Rev.2.0 Compliant
Resolution up to 1920x1440
Audio
AC97 CODEO, Fully Compliant with
AC97v2.1
LAN
Realtek 8100B
10/100Base-Tx Ethernet Interface
eBox-4
Keyboard and Mouse
PS/2 Keyboard and Mouse
On-Board IDE
Support PIO, Bus Master, and Ultra
DMA/66 operation.
Can connect to 2 IDE devices.
Peripheral
1. Printer port x1
(support SPP/EPP/ECP module)
2. USB2.0 ports x2
3. Serial port
4. Rear Audio(Mic-in, Line-out)
Dimension & Weight
eBOX-3800: 170 x 123 x 38 mm / 780g
eBOX-385x: 170 x 123 x 56 mm / 970g
Operating System
Suitable for –
Windows XP
Windows XP Embedded
Windows Embedded CE
WEPOS
LINUX
5
4
PERIPHERALS
CONNECTING THE POWER ADAPTOR
Power Adaptor
To use your computer immediately, take
and use the supplied AC adapter as a
power source. See the left diagram for
visual connection.
Connect the DC power jack of the power
adaptor to the DC Input jack of eBox-4.
Turning ON Your Computer
Press the power button as indicated on
the figure on your left-side, the system
will start automatically.
CONNECTING THE MONITOR
VGA Connection
Depending on your choice of viewing,
select a conventional CRT or the LCD
VGA monitor.
Make your connection by following the
reference diagram from the VGA cable
of your cable to the 15-pin D-Sub VGA
port of eBox-4.
eBox-4
6
PERIPHERALS
CONNECTING THE USB
eBox-4 provides USB port (one each in front & at the back of the cabinet).
Front cabinet
Turning ON Your Computer
Press the power button as indicated on
the figure on your left-side, the system
will start automatically.
CONNECTING USB, SPEAKER/EARPHONE AND WEB
USB Port
The second USB port is available for
connection to USB devices.
Connecting to WEB
There is an available RJ-45 LAN jack for
connection to the hub of your intranet;
and via your server for internet service
(see diagram for RJ-45 LAN jack).
Speaker/Earphone
eBox-4 supports Input/Output device for
speaker,
earphone
and
MIC
(Microphone), etc…
eBox-4
7
CONNECTING THE KEYBOARD AND MOUSE
Describing Mouse actions
Description
Action
Point
-
Click
Right-click
-
Scroll wheel
-
Double-click
Slide and point your mouse to your
desired position.
Press the left button once.
Press the left button twice.
Press the right button once. When
selecting (most) programs, this action
displays a shortcut menu of the contextsensitive choices.
Move your finger along the wheel of your
mouse (just upright your middle finger)
and scroll vertically to move page upward
and downward.
Describing Keyboard
The keypad usually comes in standard
QWERTY;
except
that
different
language(s) keyboard comes with
additional special characters..
eBox-4
8
5
BIOS
RECONFIGURING eBox-4
1.
2.
3.
4.
Take note that AMI BIOS is used in the eBox-4. To reconfigure the computer,
depress or hit the <Del> key to enter your BIOS setup main menu.
Select from the menu, the desired setup for change.
Press <Esc> to go back to main menu.
Move your cursor to “Save Settings and Exit”, press “Y” to save the changes that
you just made. eBox-4 will restart accordingly to your new setup.
eBox-4
9
6
TECHNICAL SPECIFICATION
Features
CPU
BIOS
System Chipset
I/O Chip
System Memory
Expansion
I/O
MIO
USB
Compact Flash Slot
Mini PCI Socket
Display
Chipset
Description
VIA Esther 1.2GHz
AMI BIOS
VIA CX700M
VT1211
Onboard 512MB DDR2
1x X-PCI connector
EIDE (Ultra DMA 133), 1x PS/2 K/B and Mouse
Print and RS-232 Port
USB 2.0 Ports (one in front)
Type I/II compact flash slot
124pin Mini PCI socket
Integrated VIA UniChrome 2D/3D Graphics with
MPEG4/WMV9 Accelerator
Up to 64 MB share system memory
Up to 1920 x 1440
Display Memory
Resolution CRT
Audio
AC97 2.2 (Codec)
VIA Vinyl VT1708
Audio Interface
Line out, , Mic in
Ethernet
Chipset
Realtek 8100BT
Remote Boot ROM
Built-in boot ROM function
Mechanical &Environment
Power Requirement+
5V~5.25V @ 4A
Operating Temperature0
0 ~ 60oC
Operating Humidity0%
- 90% relative humidity, non-condensing
Size (W x H x D)
eBOX-400 : 170 x 123 x 38 mm
eBOX-485x : 170 x 123x 56mm
Weight780
780g / 940 g
eBox-4
10
7
TAKING CARE YOUR COMPUTER
This section gives you guidelines on using eBox-4 computer – Safe using, Storing and
Handling.
STORING
Do not place your computer in a location that is subject to:
Heating sources, such as stove, oven, heater, radiator or air duct
Direct contact from sunlight
Rain or moisture area
Excessive dust accumulation area
High humidity place
Constant or occasional mechanical movement, vibration or shock
Strong magnets or magnetic fields or magnetically unshielded speakers
Ambient temperature of more than 95oF (35oC) or less than 32oF (0oC)
Do not place other electronic device or electrical equipment near your computer.
The electromagnetic field of the computer may cause interference subjecting to
malfunction.
Provide adequate air ventilation (circulation) to prevent internal buildup of heat.
Do not place your computer near the wall, behind the curtains or draperies, in
between two books that block its ventilation slots. Leave a space of at least 8
inches (20cm) behind the sides and back panel of the computer.
Change of environmental temperature: Problems may occur when there is a
sudden change of environmental temperature, or if the computer is brought
directly from a cold location to a warm one, moisture may condense inside your
computer. Turn off your computer, and contact your nearest dealer.
Checking the surrounding appliance(s) before using your computer. Since the
computer uses high-frequency radio signal and may interface with radio or TV
reception causing interference or poor signal display. When this happens,
relocate the computer by a suitable distance away from the set.
Do not drop the computer from the working table nor place heavy objects on top
of the computer.
eBox-4
11
USING CABLES FOR CONNECTION
To avoid problem, use only the specified interface cables in your accessory bag.
The supplier will not be responsible for the connection arising from the other
unspecified peripheral equipment.
Do not use cut or damaged cables for connection.
CLEANING YOUR COMPUTER
Clean the computer with a soft, dry cloth or a soft cloth lightly moistened with a
mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as
alcohol or benzine, as these may damage the finish of your computer.
When a solid object falls or a liquid spills onto the computer, turn off the
computer immediately and unplug the LAN and power cables. Contact a qualified
person or your dealer to check the computer before you use it again.
Always disconnect the power cord from the power source before cleaning the
computer.
eBox-4
12
8
TROUBLESHOOTING
This section describes the techniques of resolving some basic problems that you
encounter when using your computer. For more troubleshooting guidelines, please
contact your nearest dealer for technical support.
TROUBLESHOOTING YOUR EMBEDBOX
A. Computer does not start
Make sure the computer is properly secured and plugged into a power source
before it is turned on. Make sure the power indicator shows the power is on. See
section 2 for more information about “eBOX-4800 Overview” & eBOX-485x
Overview.
When the computer is plugged into a power strip or the UPS (Uninterruptible
Power Supply), make sure the power strip or UPS is turned on and working
normally.
Check if your VGA or LCD monitor is properly plugged into a power source and
turned on. Make sure the brightness and contrast controls are adjusted correctly.
See the manual that came with your display (monitor) for details.
Check if your power control button does not function, by removing the AC
adaptor. Wait for one minute, and then reattach all power connection before
pressing the power button.
Condensation may cause the computer to malfunction for a while. If this happens,
do not use the computer for at least one hour.
When you have checked all the above guidelines and the computer does not
work. Remove the power adaptor from the computer, unplug the power cord, and
plug it in again. Then turn on the power.
B. BIOS Error Message –
BIOS error message appear when my computer starts
If the BIOS error message appears, press any key to resume or, hit <DEL>to enter
BIOS setup main menu, follow these steps:
1. Press <DEL>, and the BIOS Setup main menu appears, check if HDD is detected
at “Pri Master”. If it is not detected, use “Sel” keys <↑↓> to choose “AUTO”, then
go back to the main menu by pressing <ESC>. Move your cursor down with “Sel”
keys <↓>, and choose “Save Settings and Exit”, a message dialog appears as
seen below, hit <Enter>.
“Save current settings and exit (Y/N)? Y ”
eBox-4
13
2. Go to “Auto Configuration with Optimal Settings” using the “Sel” keys <↑↓>, then
press <Enter>. A message dialog appears as seen below, hit “ Y ” key and press
<Enter> to save and recover the factory setting.
“Load high default settings (Y/N)? N ”
C. “Operating System Not Found” –
A message indicating that “Operating system not found” appear when my
computer starts (Windows won’t start)
Enter your BIOS setup main menu by pressing <DEL> key, be sure that your C:
drive is enable.
If Windows still does not start, follow these steps to initialize the BIOS:
1. Turn off the computer.
2. Remove any peripheral devices connected to the computer.
3. Restart the computer..
4. Press <DEL> to enter BIOS Setup main menu window.
5. Follow the steps as written in item B. BIOS error message.
For eBox-4 : If you have just connect your computer to a USB Devices, remove
these peripherals.. And restart your computer to confirm that the Windows
operating system starts properly. If your computer continues to display the
message ”Operating system not found,” and Windows does not start, please
contact your nearest dealer for servicing.
eBox-4
14
` REAR CONNECTORS OUTLINE FOR eBOX-4800
DC Power Jack
Power Switch
PS/2 Mouse
PS/2 Keyboard
LAN
USB
Mic In
VGA
Line-Out
` REAR CONNECTORS OUTLINE FOR eBOX-4850
DC Power Jack
Power Switch
eBox-4
PS/2 KB / MS
Printer Port
LAN
Mic In Line Out
Serial Port
15
` REAR CONNECTORS OUTLINE FOR eBOX-4851
DC Power Jack
Power Switch
PS/2 KB / MS
LAN
Printer Port
Mic In Line Out
Compact Flash slot
` REAR CONNECTORS OUTLINE FOR eBOX-4852/4853
DC Power Jack
Power Switch
eBox-4
PS/2 KB / MS
Printer Port
LAN
Compact Flash Slot
Mic In Line Out
2nd LAN
16
` REAR CONNECTORS OUTLINE FOR eBOX-4854
DC Power Jack
Power Switch
eBox-4
PS/2 KB / MS
Compact Flash Slot
LAN
Mic In Line Out
USB Ports
17
` PIN ASSIGNMENTS
KBD(PS/2Keyboard & Mouse) – 6-pin Mini-Din
Connector
Pin #
Signal Name
1
KBCLK
2
PMCLK
3
GND
4
KBDAT
5
PMDAT
6
SB5V
7
GND
8
GND
9
GND
Mouse (PS/2 Mouse) – 6-pin Mini-Din Connector
Pin #
Signal Name
1
PMCLK
2
NC
3
GND
4
PMDAT
5
NC
6
SB5V
7
GND
8
GND
9
GND
RJ-45 FOXCONN (LAN)– RJ45 Connector
Pin #
Signal Name
1
FTXD+
3
FRXIN+
5
NC
7
NC
eBox-4
Power Sw – Push Button Switch
Pin #
|
O
---
Status
ON
OFF
---
DC-IN (DC-IN 5V) – 3-pin MINI-DIN Lock Pin
Socket
Pin #
Signal Name
1
J23-pin 1 & 2
2
SB5V
NC
3
GND
4
USB1 (USB1x90o)– 4-pin USB Type 1 Connector
(Vertical Type)
Pin #
Signal Name
1
VCC
2
USB03
USB0+
4
GND
5
GGND
6
GGND
7
GGND
8
GGND
Pin #
2
4
6
8
Signal Name
FTXDNC
FRXINNC
18
` PIN ASSIGNMENTS
VGA – 15-pin Dsub Connector
Pin #
1
2
3
4
5
MIC_IN – 5-pin RCA Phone Jack
Pin #
1
2
3
4
5
Signal
Name
MR
MG
MB
NC
GND
Signal
Name
GND
MIC1
Open
Touch
Open
Touch
VREFOUT
Signal
Signal
Pin #
Name
Name
6
GND
11
NC
7
GND
12
VCC
8
GND
13
HYSYNC
9
NC
14
VSYNC
10
GND
15
VCC
USB (USB2): For connection to external USB
device –4-pin USB Type 1 Connector (H)
Signal
Pin #
Name
1
VCC
2
USB23
USB2+
4
GND
5
NC
6
NC
Pin #
Power – Push button
Action
Status
LEDS: POWER ON/OFF & HDD R/W
LED
State
Color
Blue
Power On
Red
HDD On
Red
HDD R/W
Flashes
COM - 9-pin Dsub Connector
Pin #
1
3
5
7
9
eBox-4
Signal
Name
DCD1
TXD1
GND
RTS1
RI1
Pin #
2
4
6
8
--
Signal
Name
RXD1
DTR1
DSR1
CTS1
--
19
WARRANTY
TERMS AND CONDITIONS
1. Warranty
The warranty terms for eBox-4 is twelve (12) months from the beginning on the date of invoice.
During the warranty period, DMP Electronics Inc Will repair replace the product covered under
this limited warranty.
2. Service and Support
DMP Electronics Inc provides the technical support for hardware problems with your system
throughout the warranty period. The technical support service is limited to configuration and
operation of eBox-4 sold by DMP Electronics Inc. The technical support service does not offer
software tutoring or training.
3. Return Merchandise Authorization(RMA)policy
If the DMP staff or dealer determines that a part is defective. Purchaser must call our technical
support service to obtain an RMA number before attempting to return any part. Please refer to
your nearest dealer for
To obtain an RMA number, Purchaser must follow procedures as below:
1. Complete the DMP Electronics Inc standard RMA Form and fax back to the RMA
Department.
2. The RMA Number must be used within 7 DAYS
3. The RMA Number must be shown clearly on your shipping label.
4. DMP Electronics Inc must receive all Returns before a replacement will be sent.
5. The repair cost is depends on the parts, the damage reasons, and whether under warranty
period…etc. The Seller will charge the Purchaser in a reasonable price.
6. A copy of the invoice for the RMA product(s) will also be shipped to Purchaser.
7. The freight of return to Media Stream Tech. is charges to Purchaser account and
accompanied by an RMA number. Any Returns with freight collect will be refused and
returned to you. After Repairing, the cost of freight will be paid by Seller.
8. DMP Electronics Inc must receive all returned goods within the warranty period.
4. Shipping Policy
The Purchaser must pre-pay shipping for any defective system or parts returned under the
warranty. DMP Electronics Inc shall not be liable for risk of loss or damage during shipment of
your returned system or parts if you fail to insure the shipment.
All products must be shipped back to DMP Electronics Inc in original or equivalent packaging.
DMP Electronics Inc will ship the repaired or replacement product(s) to Purchaser by freight
prepaid. Purchaser assumes the risk of loss. DMP Electronics Inc shall not be responsible for
failure of the delivery service to make on-time delivery.
eBox-4
20
MEMO
eBox-4
21
Download PDF