SpiderCapo Instructions (PDF)

SpiderCapo Instructions (PDF)
Positioning the SpiderCapo on your Guitar Fingerboard
1. Place the TAB [see arrow] just behind the fret
you want to capo, The KNOB is on the bass
string side.
2. Tighten the KNOB enough so that you can locate
the bass string TAB behind the fret. Then tighten
the knob so that the LEATHER PADS squeeze the
neck, and secure the SpiderCapo.
Make it nice and tight, dense ox leather protects the
neck.
3. Use the FINGER HANDLES to align the
FINGERS over the strings.
4. Rotate the FINGER HANDLES to capo each
individual string as desired.
Complete instructions are posted at
SpiderCapo.com
Warning: TABS must be placed ABOVE the face of the
fingerboard before tightening the KNOB. TABS placed
alongside the neck can be damaging to the guitar necks’ finish.
SpiderCapo Parts
LE «
x
SHAFT ‘
“TE
FINGER HANDLES
>=
a
A
=
ei
ре |
oy
mi:
KNOB — E
r
À 4 | Tl —
|
Ц
END PIECE(S)
[SIX] FINGERS
LEATHER PAD(S) | TABS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement