American Dryer Corp. | AD-400 | AD-235 PARTS MANUAL

AD-235 PARTS MANUAL
Single or Dual Coin Models
Direct Spark Ignition (DSI) Gas Models
120 VAC or 230 VAC
(for models mfd. between 1989 and 1991)
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
032592
0812/98WM/abe
ADC Part No. 450117
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual
included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE
MODEL NO.
AD-235
DISTRIBUTORS NAME
Serial Number(s)
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at
(508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly .......................................................................................................................... 2
Lower Service Door Assembly ............................................................................................................... 3
Coin Microprocessor Control Panel/Box Assemblies........................................................................... 4, 5
Front Panel Assembly ............................................................................................................................. 6
N. S. Series Main Door Switch Assembly ............................................................................................... 7
Main Door Assembly.............................................................................................................................. 8
Lint Drawer Assembly ............................................................................................................................ 9
Basket (Tumbler)/Support Assemblies..............................................................................................10, 11
Sensor Bracket Assembly ..................................................................................................................... 12
Idler Bearing Assembly ......................................................................................................................... 13
Tumbler Bearing Assembly.............................................................................................................. 14, 15
Totally Enclosed, Fan-Cooled Motor Mount Assembly ................................................................... 16, 17
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly.................................................................. 18, 19
Gas Piping Assembly ............................................................................................................................ 20
Sail Switch Assembly............................................................................................................................ 21
Gas Burner Chamber Assembly ............................................................................................................ 22
Exhaust Ducting Assembly .................................................................................................................... 23
Back Guard Assembly .......................................................................................................................... 24
Microprocessor Coin Acceptor Listing.................................................................................................. 25
Additional Parts Available ..................................................................................................................... 26
2
Control Door Assembly
MAN0364
Illus. No.
Part No.
Qty.
1*
880249
1
2
3
4
5
6
7
8
9
180313
150201
160040
160140
112077
180305
150201
117604
1
5
1
1
2
1
5
3
Description
Control Door Assembly Complete without Lock
(includes illus. nos. 1 through 3 and 7 through 9)
Lower Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
ACE® Lock Assembly ONLY without Key
ACE® Key ONLY (key no. XX4451)
“Arrow” Label
Upper Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
3
Lower Service Door Assembly
MAN0365
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7*
160001
160103
160016
180305
150201
117604
180313
880260
1
1
1
1
5
3
1
1
8
150201
5
Description
AD-100 Lock Assembly ONLY with Key
AD-100 Key ONLY
1-1/4” Lock Cam ONLY
Upper Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
Lower Black Trim Strip (28-3/8” length)
Lower Service Door Assembly Complete Less Lock
(includes illus. nos. 3 through 8)
#10-32 x 1/4” Phillips Round Head Machine Screw
* Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Coin Microprocessor Control Panel/Box Assemblies
NOTE: DUPLICATE ALL COMPONENTS ON RIGHT
SIDE OF CONTROL P ANEL/BOX.
Illus. No.
Part No.
Qty.
1
2
112526
800157
1
1
800103
1
802142
1
802143
1
160042
160043
160022
160112
160113
1
1
1
1
1
3
4*
5*
American Dryer Corporation
HAND
Description
Coin Keyboard (Touchpad) Label Assembly
Phase 4.1 Control Panel Assembly
(includes illus. nos. 1, 2, 10, 11, and 12)
Phase 4.1 Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 10, 11, and 12)
Standard Coin Box Assembly Complete
(includes illus. nos. 5 through 7 Only)
High Security Coin Box Assembly Complete
(includes illus. nos. 5 through 7 Only)
ACE® Standard Coin Box Lock Assembly ONLY with Key
ACE® High Security Coin Box Lock Assembly ONLY with Key
High Security Coin Box Lock Assembly ONLY with Key
Key ONLY (for Standard Coin Box Lock)
Key ONLY (for High Security Coin Box Lock)
88 Currant Road / Fall River, MA 02720-4781
Coin Microprocessor Control Panel/Box Assemblies (continued)
Illus. No.
Part No.
Qty.
6
---------
1
7
8**
137056
137021
112800
137023***
865050
865051
153012
137130
137031
1
3
1
1
1
1
4
1
1
152001
137021
137020
137022
150315
136151
136057
137013
800196
4
15
1
1
1
1
***
4
1
9
10
11
12
13
14
15
16
17
18****
19
20
21
22
23
24
25
26
27
150300
141403
150002
120715
151000
151001
802142
802143
28***** 153018
29
152014
152002*****
*
**
***
****
*****
2
1
2
1
2
6
1
1
4
4
4
5
Description
Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptor Listing on page 26)
Optical Switch ONLY (Greenwald)
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
Optical Switch Connector ONLY
Single Coin Optic Switch Harness ONLY
Dual Coin Optic Switch Harness ONLY
#8 Star Washer
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
Phase 4.1 Coin Microprocessor Controller (computer) ONLY with
Battery Clip
#8-32 Hex Nut
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
15-Pin Strain Relief
#6 x 3/8” Phillips Pan Head Screw
Solid State Relay Board
1/2-Amp (Slo Blo) Fuse
Nylon Standoff
ADG-235 Control Panel/Box Assembly Complete
(includes illus. nos. 17 through 21, 24, and 25)
For Gas Models ONLY
#10 x 1/2” Hex Washer TEK Screw
DSI (Direct Spark Ignition) Transformer - 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
#8-32 Pal Nuts
Standard Coin Vault ONLY
High Security Coin Vault ONLY
1/4” Flat Washer
1/4-20 Free Spin Washnut
1/4” Hex Nut
Specify key number when ordering.
Quantity is 3 or 6.
Quantity is 1 or 2.
Check fuse rating for verification.
For use on High Security Coin Vault ONLY.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Front Panel Assembly
UPPER FRONT PANEL ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS EXCEPT LOGO FOR
LOWER FRONT P ANEL ASSEMBLY.
Illus. No.
Part No.
Qty.
1*
800692
1
2
3
4
5
6
7
154215
170330
150309
121405
150201
---------
2
1
8
1
2
1
8
112350
870011
150300
1
1
1
9
Description
Right Hand Insulated Front Panel Assembly
(includes illus. nos. 1, 2, 3, and 6)
1/8” Pop Rivet
Friction Door Catch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
#10-16 x 1/2” Phillips Pan Head Machine Screw
N.S. Series Main Door Switch
(refer to N.S. Series Main Door Switch Assembly on page 7)
ADC Logo ONLY
Logo Double Tape Kit
#10 x 1/2” Hex Washer TEK Screw
* Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
N.S. Main Door Switch Assembly
UPPER MAIN DOOR SWITCH ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
P ANEL ASSEMBLY.
Illus. No.
Part No.
Qty.
1
2
313215
800445
1
1
3
4
5
6
7
313217
150025
153045
137003
153045
152016
1
2
2
2
2
2
Telephone: (508) 678-9000
LOWER
FRONT
Description
Door Switch Actuator Arm
N.S. Series Main Door Switch Assembly Complete
(includes illus. nos. 1 through 7)
Main Door Switch Housing ONLY
#4-40 x 1” Phillips Pan Head Machine Screw
#4 Lock Washer
N.S. Series Main Door Switch ONLY
#4 Lock Washer
#4-40 Hex Nut
Fax: (508) 678-9447
8
Main Door Assembly
UPPER MAIN DOOR ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
DOOR ASSEMBLY.
Illus. No.
Part No.
Qty.
1
881422
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
170319
150448
150431
1
4
4
1
1
1
4
4
1
7
8
9
American Dryer Corporation
LOWER
MAIN
Description
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (Nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” Dome Hex Head Screw)
88 Currant Road / Fall River, MA 02720-4781
9
Lint Drawer Assembly
UPPER LINT DRAWER ASSEMBLY
MAN0742
NOTE: DUPLICATE ALL COMPONENTS EXCEPT PROGRAM
LOCATION LABEL FOR LOWER LINT DRAWER
ASSEMBLY.
Illus. No.
Part No.
Qty.
1
2
3
850667
112040
112530
1
1
1
Telephone: (508) 678-9000
Description
Lint Drawer Assembly
“Clean Lint Screen” Label
“Coin Program Location Summary” Label
Fax: (508) 678-9447
10
Basket (Tumbler)/Support Assemblies
UPPER BASKET (TUMBLER)/SUPPORT ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
(TUMBLER)/SUPPORT ASSEMBLIES .
American Dryer Corporation
LOWER
BASKET
88 Currant Road / Fall River, MA 02720-4781
11
Basket (Tumbler)/Support Assemblies
Illus. No.
Part No.
Qty.
1
800831
1
800721*
1
800891
1
800841*
1
301315
301316
301414
301415
150518
100915
153004
154210
800617
152005
153005
153004
116003
401010
2
1
2
1
1
3
3
30
1
3
3
3
1
1
2
3
4
5
6
7
8
9
10
11
Description
Basket (Tumbler) and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
Basket (Tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Stainless Steel Basket (Tumbler) and Support Assembly Complete with
Felt Collar
(includes illus. nos. 1 through 11)
Stainless Steel Basket (Tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Short Basket (Tumbler) Rib ONLY
Tall Basket (Tumbler) Rib ONLY
Stainless Steel Short Basket (Tumbler) Rib ONLY
Stainless Steel Tall Basket (Tumbler) Rib ONLY
5/16-18 x 3/8” Socket Button Head Screw
3/8-16 x 31” Tie Rod
3/8” Flat Washer
5/32” x 3/16” Pop Rivet
Basket (Tumbler) Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar (5 oz. tube)
* Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Sensor Bracket Assembly
UPPER SENSOR BRACKET ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
BRACKET ASSEMBLY.
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
122605
122701
122801
154007
150000
801428
1
4
1
2
2
1
7
8
9
10
11
12
305107
130103
153010
152000
150301
122604
122700
1
1
2
2
2
1
4
American Dryer Corporation
LOWER
SENSOR
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
1/4” Tinnerman Push-on Fastener
#6-32 x 1/4” Slotted Round Head Machine Screw
Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 9)
Temperature Sensor Bracket ONLY
225º Large Automatic Thermostat ONLY
#6 Star Washer
#6-32 Hex Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
4-Pin Connector ONLY
Pin Terminal ONLY
88 Currant Road / Fall River, MA 02720-4781
13
Idler Bearing Assembly
UPPER IDLER BEARING ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
BEARING ASSEMBLY.
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
100113
101129
154301
100100
100705
301850
150529
100214
153007
152002
150617
153005
153004
152020
152004
801010
1
1
2
1
1
1
3
2
3
3
2
2
2
1
1
1
17
18
100406
150509
---------
1
1
-
Telephone: (508) 678-9000
LOWER IDLER
Description
4L-400 V- Belt (idler to motor)
9” x 2-1/2” Pulley with 3/16” Key
5/16-18 x 5/16” Allen Set Screw
5L-660 V-Belt (idler to basket [tumbler)]
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft
1/4-20 x 2-1/4” Carriage Bolt
5/8” Flange Bearing
1/4” Lock Washer
1/4-20 Hex Nut
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
5/16-18 Standard Square Nut
5/16-18 Hex Nut
Idler Bearing Assembly Complete
(includes illus. nos. 6 through 17)
Idler Bearing Mount ONLY
5/16-18 x 3” Hex Head Machine Bolt
DSI Module Mounting Bracket
(refer to DSI Gas Valve/Burner Assembly on page 20 and page 21)
Fax: (508) 678-9447
14
Tumbler Bearing Assembly
UPPER TUMBLER BEARING ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
BEARING ASSEMBLY.
American Dryer Corporation
LOWER
TUMBLER
88 Currant Road / Fall River, MA 02720-4781
Tumbler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
880203
153005
152005
150501
153002
152001
150621
152004
801101
1
4
4
2
2
2
2
2
1
801103
1
801105
801104
150610
152004
150508
153005
152005
150600
880202
153004
153005
152005
100713
101100
154301
100100
1
1
2
2
2
2
2
2
1
2
2
2
1
1
2
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Telephone: (508) 678-9000
15
Description
1-3/8” Flange Bearing with Nylock Set Screw
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 9, 10, and 13 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 9, 10, and 13 through 15)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
5/16-18 x 1-1/2” Allen Set Screw
5/16-18 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
1-3/8” Pillow Block Bearing with Nylock Set Screw
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
1/4” x 1/4” x 7/8” Key
18” Cast Pulley
5/16-18 x 5/16” Allen Set Screw
5L-660 V-Belt (tumbler [basket] to idler)
Fax: (508) 678-9447
16
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
UPPER T.E.F.C. MOTOR MOUNT ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
MOTOR MOUNT ASSEMBLY.
American Dryer Corporation
LOWER
T.E.F.C.
88 Currant Road / Fall River, MA 02720-4781
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
100604
152006
153050
100702
153050
117604
850019
803967*
1
2
1
1
3
4
1
1
8
9
10
11
12*
13
14
15
16
17
150501
153002
153001
154000
100065
150501
153002
153001
153001
101131
4
4
4
4
1
4
4
4
**
1
18
100113
1
19
122701
122801
137030
122801
837005
8
1
1
1
1
837049
1
20
21
17
Description
12-1/2” Impellor with 1/2” Bore
1/2-20 Left Hand Jam Nut
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
Neoprene Sponge Tape (sold by the foot)
Motor Mount ONLY
1/2 HP 100/120-230v 1ø 50/60 Hz T.E.F.C. Motor Mount Assembly Complete
(includes illus. nos. 1 through 7 and 11 through 17)
For use on 60 Hz Models ONLY
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
1/2 HP 100-230v 1ø 50/60 Hz T.E.F.C. Motor with Plug
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Flat Washer
1/2” x 2-1/4” Motor Pulley
(for use on 60 Hz Models Only)
4L-400 V-Belt (motor to idler)
For use on 60 Hz Models ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing ONLY
Pin/Socket Extraction Tool
Low To High Voltage Conversion Harness
(120 Volt to 230 Volt)
High To Low Voltage Conversion Harness
(230 Volt to 120 Volt)
* Specify voltage when ordering.
** As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
UPPER GAS VALVE/BURNER ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
VALVE/BURNER ASSEMBLY.
American Dryer Corporation
LOWER
GAS
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Gas Valve/Burner Assembly
Illus. No.
Part No.
Qty.
1
850804
809313*
1
1
809314*
1
11
12
13
150300
881367
318650
150301
128927
140411
318650
150301
141235
140828
140811
153000
152001
141131
2
1
1
2
1
1
1
2
1
1
1
1
1
1
14
15
16
17
141109
150108
153000
880134
1
2
2
1
18
19
20
21
22
23
24
25
26
27
28
305412
880330
152001
121014
132607
121028
121014
880815
151000
801013
152014
---------
1
1
2
1
2
1
1
1
4
1
1
-
--
874059**
1
2
3
4
5
6
7
8
9
10
19
Description
DSI Gas Valve/Burner Tube Mounting Plate ONLY
DSI (natural gas) Valve/Burner Assembly Complete Less Orifice
(includes illus. nos. 1, 3, through 9 and 11 through 23)
DSI (liquid propane) Gas Valve/Burner Assembly Complete Less Orifice
(includes illus. nos. 1, 3, through 9 and 11 through 23)
#10 x 1/2” Hex Washer TEK Screw
Angle Union Shut Off with 1/2” Tail Piece
Notched Pipe Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” 24 VAC DSI Redundant (natural gas) Valve
DSI Gas Valve L.P. (liquid propane) Conversion Kit
Notched Pipe Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” Single Port Manifold
#20 Burner Orifice (natural gas) ONLY
#41 Burner Orifice (L.P. [liquid propane] gas) ONLY
#8 Steel Burr
#8-32 Hex Nut
DSI (Direct Spark Ignition) Up-Shot Burner Tube Assembly ONLY without
Flame Spreader
Flame Spreader ONLY
#8-32 x 1/2” Slotted Pan Head Machine Screw
#8 Steel Burr
Ignitor/Flame-Probe Kit Assembly
(includes illus. 18 and 19)
DSI Ignitor Gap Feeler Gauge ... Not Illustrated
#20 Gauge-7/28 High Voltage (HV) Connector and Wire
#8-32 Hex Nut
1/4” Insulated Terminal
#18 Gauge Red Silicone Wire (sold by the foot)
1/4” x .032 Insulated Terminal
1/4” Spade Terminal
ADC DSI Module ONLY (50/60 Hz)
#6-32 Pal Nut
DSI Module Mounting Bracket ONLY
1/4-20 Free Spin Wash Nut
Idler Bearing Mount
(refer to Idler Bearing Assembly on page 13)
ADG-235 Burner L.P. Conversion Kit with Orifices
* Burner Orifice is not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Gas Piping Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
318702
150300
141236
881367
1
2
1
2
American Dryer Corporation
Description
Top Pipe Support Bracket ONLY
#10 x 1/2” Hex Washer TEK Screw
Gas Piping Manifold
Angle Union Shut Off with 1/2” Tail Piece
88 Currant Road / Fall River, MA 02720-4781
21
Sail Switch Assembly
UPPER SAIL SWITCH ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
SAIL SWITCH ASSEMBLY.
Illus. No.
Part No.
Qty.
1
2
150301
802800
2
1
3
4
5
6
7
8
9
10
154004
150309
802709
122200
150303
105500
319202
154002
1
2
1
1
2
1
1
1
Telephone: (508) 678-9000
LOWER
LOWER
Description
#8-18 x 7/16" Phillips Pan Head TEK Screw
Sail Switch Box with Cover and Bracket ONLY
(includes illus. nos. 2, 4, and 5)
Twin Speed Nut
# 10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4" Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (embossed)
1/8” Push-on Fastener
Fax: (508) 678-9447
22
Gas Burner Chamber Assembly
UPPER GAS BURNER CHAMBER ASSEMBLY
NOTE: DUPLICATE ALL COMPONENTS FOR
BURNER CHAMBER ASSEMBLY.
Illus. No.
Part No.
Qty.
1
804025
1
2
3
4
318006
150300
802502
1
2
1
5
6
7
8
319710
150301
150001
130103
151000
1
2
2
1
2
American Dryer Corporation
LOWER
GAS
Description
Gas Burner/Electric Oven Chamber Assembly
(includes illus. nos. 1, 2, and 3)
Flame Viewing Plate
#10 x 1/2” Hex Washer TEK Screw
Hi-Limit Bracket Assembly
(includes illus. nos. 4 through 8)
Hi-Limit Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/2” Phillips Round Hand Machine Screw
225º Large Automatic Thermostat
#6-32 Pal Nut
88 Currant Road / Fall River, MA 02720-4781
23
Exhaust Ducting Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
880505
143527
143539
143537
143538
143536
121104
121105
150301
315025
150300
121104
121105
150301
143536
315025
150300
117505
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
1
2
*
9
10
11
12
13
---
Description
Wye Branch Damper Assembly
6” Round x 7” Oval Straight Boot
15-1/2” x 7” Oval Duct
7” Oval x 45º Elbow
6” Round x 7” Oval Straight Boot
6” Round x 45º Elbow
Junction Box Only
Junction Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Rear Wiring Box Cover ONLY
#10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
Junction Box
Junction Box Cover ONLY
#8-18 x 7/16” Phillips Head TEK Screw ... Not Illustrated
6” Round x 45º Elbow
Rear Wiring Box Cover ONLY
#10 x 1/2” Hex Washer TEK Screw ... Not Illustrated
Aluminum Duct Tape (sold by the foot)
* As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
Back Guard Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
311014
150301
318702
150300
103500
2
16
1
2
4
American Dryer Corporation
Description
Upper/Lower Back Guard Assembly
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Pipe Support Bracket ONLY
#10 x 1/2” Hex Washer TEK Screw
Adjustable Leveling Leg
88 Currant Road / Fall River, MA 02720-4781
25
Microprocessor Coin Acceptor Listing
NOTE: Coin Acceptors listed included Optical Switch (ADC Part No. 137056).
Single Coin*
ADC Part No.
Nation
Description
125100
125127
125101
125114
125115
125106
125120
125124
125109
125125
125108
125107
125130
125123
125104
125103
125121
125129
125132
125133
U.S. and Canada
Canada
United Kingdom
United Kingdom
United Kingdom
France
France
France
Denmark
Netherlands
Australia
Australia
Australia
New Zealand
Japan
------Singapore
Hong Kong
25¢ Optic Coin Acceptor
$1 Canadian Optic Coin Acceptor
10 New Pence Optic Coin Acceptor
20 New Pence Optic Coin Acceptor
1 Pound Optic Coin Acceptor
1 French Franc Optic Coin Acceptor
2 French Franc Optic Coin Acceptor
5 French Franc Optic Coin Acceptor
1 Danish Krone Optic Coin Acceptor
25¢ Guilder Optic Coin Acceptor
10¢ Australian Optic Coin Acceptor
20¢ Australian Optic Coin Acceptor
$1 Australian Optic Coin Acceptor
50¢ New Zealand Optic Coin Acceptor
100 Yen Optic Coin Acceptor
.882 Token Optic Coin Acceptor
.800 Token Optic Coin Acceptor
Muller Token Optic Coin Acceptor
50¢ Singapore Optic Coin Acceptor
$1 Hong Kong Optic Coin Acceptor
Dual Coin*
125116
125128
125112
125110
125111
125113
125122
125117
125131
125126
125118
125105
U.S. and Canada
Canada
United Kingdom
United Kingdom
United Kingdom
United Kingdom
France
Denmark
Denmark
Netherlands
Singapore
Japan
10¢ / 25¢ Dual Optic Coin Acceptor
25¢ / $1 Dual Optic Coin Acceptor
10 / 20 Pence Dual Optic Coin Acceptor
10 / 50 Pence Dual Optic Coin Acceptor
20 / 50 Pence Dual Optic Coin Acceptor
1£ / 20 Pence Dual Optic Coin Acceptor
2 / 5 Franc Dual Optic Coin Acceptor
1 / 5 Danish Krone Dual Optic Coin Acceptor
5 / 10 Danish Krone Dual Optic Coin Acceptor
25¢ / 1 Guilder Dual Optic Coin Acceptor
20¢ / 50¢ Singapore Dual Optic Coin Acceptor
50 / 100 Yen Dual Optic Coin Acceptor
* Consult factory for Coin Acceptors not listed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Part No.
112039
114001
114006
120100
120300
120400
120500
120600
120800
120802
120902
120903
121014
121499
121500
121503
122804
170194
404500
404502
404506
404507
880200
Additional Parts Available
Description
“Black/White/Green Ground” Label
“CAUTION -Exhaust/Lint Screen” Label
“WARNING - Fire Hazard” Label
3/8” Straight BX Connector
3/8” x 45º BX Connector
3/8” Red Jacket (BX Insulator)
3/8” Jiffy Clip (BX Retainer Clip)
3/8” Greenfield (BX)
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
1/4” Insulated Female Terminal
4” Harness Tie
7” Harness Tie
Harness Tie Mounting Clip
Manometer (water column test gauge)
Tumbler Lint Cleaning Brush
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Beige Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electric Terminal Assortment Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450117
1- 10/09/91-50
4* 06/26/92-100
2- 10/23/95-100
5* 06/11/97-50
3* 05/25/92-100
Download PDF