Audiovox | D1809 - DVD Player - 8 | Owner`s manual | Audiovox D1809 - DVD Player - 8 Owner`s manual

PVI-170BI
In-Dash 7” Monitor
Touch Screen
DVD/CD/MP3/MP4
AM/FM Radio
With Bluetooth
Support iPod/iPhone
Owner’s Manual
Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.
WARNING!
To promote safety, certain functions are disabled unless the parking brake is on. The Unit is
designed to detect parked status and must be connected to the power supply side of the
parking brake switch. Improper connection or use of his connection may violate applicable law
and may result in serious injury or damage. To avoid the risk of damage and injury and the
potential violation of applicable laws, this unit is not for use with a video screen that is visible to
the driver.
„ To avoid the risk of accident and the potential violation of applicable laws, the front Video
image feature should never be used while the vehicle is being driven. Also, other video
displays should not be in a location where it is a visible distraction to the driver. In some
countries or states the viewing of images on a display inside a vehicle even by persons
other than the driver may be illegal. Where such regulations apply, they must be obeyed
and this unit’s DVD features should not be used.
„ Please remember to wear your seat belt at all times while operating your vehicle. If you are
ever in an accident, your injuries can be considerably more severe if your seat belt is not
properly buckled.
„ The supplier waves any and all liability when these warnings are not followed.
OPERATION PRECAUTIONS
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
Only connect to a 12Vdc battery and negative grounding.
Avoid placing the product in direct sunlight, in areas with high levels of dust, high
temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures, cool
down the car interior by means of ventilation or air-conditioning.
Operate in well ventilated areas.
Do not turn on or off the product in short intervals. When turning the unit off, wait for at least
10 seconds prior to turning the unit on again. Do not operate the player with scratched,
bended or broken discs and when a disc is not loaded properly, do not force it into the
player.
Do not watch video playback while driving which will cause serious danger and risks of
traffic accident. It may violate the laws and regulations.
(There may be exceptional case, i.e., using rear view camera and navigation system)
Do not install the unit where the operation for safety driving is restrained.
Do not disassembly the unit by yourself, if need repairing, please take the unit to the after
service center.
Do not open and close the monitor manually, it may damage the monitor tilt system.
Do not touch the LCD screen by hard objects, it may damage or give scratch to the LCD
screen.
If the back of monitor touches dashboard or air-conditioner inlet etc after open the monitor ,
then setup TILT level in monitor TILT menu to prevent damage from repeat touching.
Car parking under direct sunlight may increase the temperature inside the car and the unit
may not be in proper operation, please try it again after the temperature returns to normal.
Do not replace the fuse on the power cable without professional guidance, using improper
fuse may cause damage to the unit or even cause burn the unit.
Do not use irregular shaped Disk.
IR remote control operation may be hindered by monitor when the monitor is opened, thus
please use the remote control at the similar level of remote control receiver.
Do not install the unit where the cooling fan is blocked.
2
CONTENTS
WARNING! ................................................................................................................. 2
OPERATION PRECAUTIONS.................................................................................... 2
CONTENTS ................................................................................................................ 3
INSTALLATION / UN-INSTALLATION ....................................................................... 5
WIRING CONNECTIONS ........................................................................................... 6
FRONT PANEL........................................................................................................... 8
REMOTE CONTROL ................................................................................................ 10
REMOVE BATTERY................................................................................................. 13
MAIN MENU ............................................................................................................. 14
◆ RADIO PLAYER................................................................................................... 14
◆ DVD PLAYER ...................................................................................................... 15
◆USB/SD/MMC CARD OPERATION ...................................................................... 16
◆AV-IN MODE......................................................................................................... 16
◆IPOD/IPHONE OPERATION................................................................................. 17
◆SETTING CONTROL ............................................................................................ 18
SOUND CONTROL .................................................................................................. 18
DISPLAY CONTROL ................................................................................................ 19
RADIO CONTROL .................................................................................................... 19
GENERAL CONTROL .............................................................................................. 19
DVD SET UP MENU................................................................................................. 20
SYSTEM INFORMATION ......................................................................................... 21
CALIBRATION.......................................................................................................... 21
BLUETOOTH SECTION ........................................................................................... 21
OTHER FUNCTIONS ............................................................................................... 23
NOTES ON DISC ..................................................................................................... 24
TROUBLESHOOTING.............................................................................................. 25
TROUBLESHOOTING.............................................................................................. 26
TECHNICAL SPECIFICATIONS............................................................................... 27
3
Accessories
Package contains the following accessories for installation and operation of the unit.
(1) Washer, Spring
Washer, M5 Nut
1 each
(2) Mounting Strap
1
(3) Bolt
1
(4) Screw 4*6
4
(5) Mounting Collar
1
(6) Release Key
2
(7) Screw 5*20
1
(8) Rubber Cushion
1
1x AV-IN Cable
Warranty card
User Manual
Remote Control
RCA Cable
Power Cable
Noted: Product image may vary from the actual delivery
4
Trim ring
INSTALLATION / UN-INSTALLATION
Note
Before starting installation of the unit, make sure the wiring is connected properly.
Use only the parts provided with the unit to ensure proper installation.
The use of unauthorized parts may cause malfunction.
Install the unit where it does not get in the driver’s way and will not injure the passenger in case
there is a sudden stop, like an emergency stop.
‹ INSTALLATION (Figure 1)
— Insert Half Sleeve into dash-board hole and bend mount tabs outwards to fix it
— If necessary, place the mount strap at the rear of the unit and fix it with provided washer as
figure 2.
— Push the unit into the Half Sleeve until you hear a click sound
— Place Trim Ring over the unit and installation is completed as figure 3. (Some vehicle may
not need Trim Ring)
‹ UN-INSTALLATION
Insert the supplied extraction keys into the unit and pull the unit out with keeping the extraction
keys. (as Figure. 4)
5
WIRING CONNECTIONS
NOTE: Never connect cable to the system while it is connected to the battery power. Whenever
the unit is disconnected from the battery, the preset memory will be erased and the unit will go
back to its factory defaults.
Note: To watch video the parking wire should be connected to break signal. 2 cables is
connected to a Hands-Free device (not included).
Parking wire
Note: The parking wire is connected with brake signal; for safety, the programs can be seen on
the monitor after braking the car.
Connecting the reversing line to taillight on the
car
After connecting, when you start up the reverse gear, the unit will receive the picture from car
rear view camera.
6
Note:
-
Only use groundless loudspeakers.
Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at
higher volumes.
Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.
Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body (GND). The
unit is using a BTL circuit and each loudspeaker must be connected with insulated cables according the
diagram.
Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away from the
antenna and/or antenna extension parts.
Connect the speakers according the following diagram, incorrect connections will damage the unit or
your loudspeakers
Correct connection
Left front - Right front | Left rear - Right rear
Incorrect connections
7
FRONT PANEL
1. Release Button
Press to detach and release the front panel. When released the unit will switch off automatically
after a few second. Detach/Attach the Panel: Press REL button and pull out the left side to
detach the panel. To attach it, insert the right side first and then press the left side until hear a
click sound.
2. BAND/TILT Button
In Radio mode, press to change radio band in sequence of FM1 → FM2 → FM3 → AM1 →
AM2.
3. MODE Button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), Bluetooth, Iphone/Ipod and
AV IN.
4. SEL/MUTE Button
SEL : Long press it to enter SOUND SETTING menu to adjust the sound settings; EQ => BASS
=> TREBLE = > BALANCE => FADER => EQ. Adjust the level by click touch screen to
increase or decrease.
8
Short press it to MUTE the volume output, press it again to resume volume when the power is
on.
5. / PLAY / PAUSE / Button
In Disc, USB, SD CARD mode, press it to pause / play. Press it again to resume playback; long
press it to stop, Press it again to resume playback.
6. Button/
Button
In RADIO mode, press to start automatic searching, press and hold for two seconds to start
manual searching, then press to tune each frequency step downward.
In DVD / SD / USB mode, press button to skip to the previous track. Press button and hold
for two seconds to activate fast reverse (REW) search in a track.
In Bluetooth mode, press to make a call after inputted a phone number or accept an incoming
call.
7. Button/
button
In Radio mode, press to start automatic searching, press and hold for two seconds to start
manual searching, then press them to tune each frequency step upward.
In DVD / SD / USB mode, press button to skip to the next track. Press button and hold for
two seconds to activate fast forward (FF) search in a track.
In BLUETOOTH mode, press to reject a coming call or hang up while calling.
8. VOL Knob / POWER Button
VOL Knob: Adjust the volume level by turning the knob clockwise to increase or
counterclockwise to decrease.
POWER: Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off.
(* Press any button to turn on the unit except REL button and EJECT button on panel, and
EJECT button on remote control)
DUAL KEY setting: Long press it to choose C-DUAL/D-DUAL (Buttons on panel and RC control radio
only), D-DUAL (Buttons on panel and RC control DVD only)
9. DISC slot
10 Info Display
Information Display LCD when operation the unit.
11. internal MIC slot
12. IR Sensor
IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels.
13. AV-in Jack
Put the AV plug into the AV-IN jack which was marked on front panel.
14. USB slot
USB slot, for Multimedia playback files only. Insert a USB into this slot and the unit will
automatically start reading and playback the card. * Supported Music File Format: MP3, WMA
Files
15. EJECT Button
Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is
reinserted automatically.
16. OPEN Button
Press this to open and close the TFT monitor. WARNING: Do not obstruct the monitor while in
the opening or closing cycle, this may cause damage to the monitor mechanism and is NOT
covered under warranty.
17. TFT display
18. RESET Button
Press it with a thin, sharp object. The device will then be reset to factory default settings.
9
19. SD/MMC CARD slot
SD/MMC card slot, for Multimedia playback files only. Insert a SD/MMC CARD into this slot and
the unit will automatically start reading and playback the card. * Supported Music File Format:
MP3, WMA Files
REMOTE CONTROL
MODE
POWER
BAND/RANDOM/Clear
ENTER
UP/DOWN/LEFT/RIGHT
EJECT
STEREO/MONO/*
P.SCN/RPT/#
BACKWARD/SEEKFAST BACKWARD
10:LOUD
11:OSD
12:PBC/STOP
13:DIGITAL NUMBERS
14:PLAY/PAUSE
15: MUTE/BLUETOOTH
16: MENU
17:SUBTITLE
18:SETUP
19:ANGLE/Accept
20: INT/Eject
21: VOLUME PLUS
22: A-B/ZOOM
23: SEL
24: FORWARD/SEEK+
FAST FORWARD
25: VOLUME MINUS
26: AUDIO/GOTO
27: DUAL
28:OPEN/TILT
1:
2:
3:
4:
5:
6:
7:
8:
9:
1. MODE button
Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB
device in the unit), CARD (if there is a SD/MMC card in the unit), Bluetooth, Iphone/Ipod and
AV IN.
2. POWER
Power on or off
3. BAND/ RDM/Clear
In Radio mode, press to change radio band in sequence of FM1 → FM2 → FM3 → AM1 →
AM2. In DVD mode, press to play randomly .In Bluetooth mode ,press briefly it to clear single
wrong number .long press it to clear all the wrong number.
4. ENTER button
Press it to confirm selection or setting.
5: Cursor / / / buttons
Use the / / / buttons to select the menu item. the title, track or to show next frame.
6. EJECT button
Press it to eject the disc.
7. STEREO/MONO/*
Press STEREO button to select STEREO or MONO.
10
In BLUETOOTH mode, press it to make a * symbol.
8. P.SCN/ RPT /#
In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL
In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off.
In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current
band and stay on each memory stations for about 5 seconds.
AS (Auto Save): Long press to save the stations with good reception automatically.
In BLUETOOTH mode, press it to make a # symbol.
9. / seek- buttons
In DVD mode, Press button to skip to the previous track. Press and hold button for two
seconds to activate fast reverse (REW) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching. button Frequency down.
10. LOUD
Press to set LOUD on or OFF.
11. OSD button
In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup.
(HUE / SATURATION / COLOR RESET / BRIGHT / CONTRAST / SHARP / BACK)
12. STOP/PBC button
Press it to Stop playback from the current position, press it again to final stop to the very
beginning. Press PLAY/PAUSE button to play.
Press and hold for two seconds to set PBC on/ off in VCD mode.
13. Digit 0-9 buttons
In radio mode, select 1-6 the desired band; In DVD mode, select track.
In BLUETOOTH mode, press it to input phone number,long press 0 number to make a +
symbol
14. PLAY/PAUSE button
In DVD mode, press it to pause playback, press again to resume.
15. Mute button/Bluetooth button
: Short press this button to mute the volume output, press it again to resume volume.
Long press this button to enter into Bluetooth mode.
16. MENU button
Press it to show main menu, in DVD mode, long press it to enter TITLE MENU (Enable only if
the DVD disc with title menu).
17. SUBTITLE button
Press it to select the subtitle language (Available only if the disc with subtitle function).
18. SETUP button
In DVD mode press it to enter the setup menu.
19. ANGLE Button/Accept Button
In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded
DVD file or DVD disc that has this function).
In BLUETOOTH mode, press to make a call after inputted a phone number or accept an
incoming call.
20. INT Button /Reject Button
Press it to activate the intro function. You can play the beginning of every track for 10 seconds
in sequence.
In BLUETOOTH mode, press to reject a coming call or hang up while calling
21. VOL+ button
Press to increase volume level.
11
22. A-B/ZOOM button
During playback, press it at the starting point of section you want to repeat(A), press this button
again at the ending point of the section you want to repeat (B), section A-B repeating starts.
Press it again to cancel the A-B repeat function.
Press it and hold for two seconds in DVD mode to zoom the image in or out in the sequence of
ZOOM 2-> ZOOM 3-> ZOOM 4-> ZOOM 1/2-> ZOOM 1/3-> ZOOM 1/4.
23. SEL button
Press it to enter the SOUND SETTING menu, and press Cursor UP/DN buttons to choose an
item and press cursor left/right buttons to set the item. Press SEL button again to exit the menu.
24. / seek + buttons
In DVD mode, Press
button to skip to the next track. Press and hold
button for two
seconds to activate fast forward (FF) search in a track.
In RADIO mode, press button to start searching automatic, press and hold for two seconds to
start manual searching. button Frequency up.
25. VOL- button
Press to decrease volume level.
26. AUDIO/GOTO button
In DVD mode press it to select the audio language.
In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R
=>STEREO.
Go to: in DVD mode,press and hold for 2 seconds to show TIME SEARCH menu, select
number and confirm to go to certain position directly. When press button to enter
TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or
CHAPTER position directly.
27. DUAL button
Activating Dual Zone Mode
• Access GENERAL setup in the SETTINGS menu and press the icon for DUAL mode
and select ON.
• Insert a DVD or begin playing a movie from SD card or USB.
Controlling the Front Zone (C-DUAL)
• Press and hold the front panel POWER button, or the DUAL button on the remote
control, until C-DUAL appears on the screen.
• Press the ARROW icon in the top right corner of the screen to return to the main menu.
Select the mode you wish to use in the front zone.
• The units screen will change to the selected mode. The DVD or SD/USB movie will
continue to play only on the VIDEO OUT and DUAL OUT audio outputs, while the
selected mode audio is played through the front and rear LINE outputs. All front panel
and remote controls will affect only the selected mode activated for the front zone.
Controlling the Rear Zone (D-DUAL)
• Press and hold the front panel POWER button, or the DUAL button on the remote
control again, until D-DUAL appears on the screen.
• All front panel and remote control functions for DVD, USB, or SD, including volume, will
control only the media playing for the rear zone.
Press and hold the front panel POWER button, or DUAL button on the remote control until DDUAL disappears to return to normal unit operation. Press and hold the front panel POWER
button, or DUAL button on the remote control again to reactivate Dual Zone Mode.
28. OPEN/TILT button:
Short press it open or closed the monitor; long press it to adjust the tilt angle of monitor.
12
REMOVE BATTERY
Note:
„ The distance may vary according to
the brightness of ambient light.
„ If the remote is not used for an
extended period of time, remove the
battery to prevent possible damage
from battery leakage and corrosion.
„ Do not place any objects between
the remote control unit and the
sensor on the unit.
„ Do not drop the remote control onto the floor; it will damage it beyond repair.
„ Do not use the remote control unit, while simultaneously operating the remote control unit
of any other equipment; they may interfere resulting in improper operation.
„ The battery normally last for about one year although depending how often the remote
control is used. If the remote control unit isn’t working even when it is operated near the unit,
replace the battery with a new battery of the same make and use only a lithium cell battery
type: CR2025 (3V).
„ Dispose empty batteries in accordance with your local governmental regulations.
„ Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.
„ Keep the battery out of reach of children, should the battery be swallowed, immediately
consult a doctor.
13
MAIN MENU
The best way to discover the program is to explore each screen in detail, and to find out how to
move from one to another. Read this chapter for a guided tour.
Unit starts by displaying the Main menu.
This is the root of the screen hierarchy, and you can simply access all features by tapping on
the touch screen buttons.
Tap the icons to enter a desired mode.
◆ RADIO PLAYER
To start Radio, tap RADIO button on main menu screen.
Mute the sound
VOL increase or decrease by touch the button accordingly
Touch this button can choose FM1, FM2, FM3, AM1, AM2.
Touch this button can scan the stations from 1-6, Long Touch it to save the stations with
good reception automatically and scan each station for about 5 seconds
Touch this button to search stations
Touch this button to open manual select station backward
Touch this button to open manual select station forward
Touch this button to search stations.
Touch this button to select stereo or mono sound reception.
Touch this button to select reception of local station or DX for distance station.
14
◆ DVD PLAYER
To start DVD Player, tap on DVD button from main menu screen.
TOUCH SCREEN MENU
You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT
screen. Tap the screen again to hide the buttons.
Insert DVD disc
insert VCD disc
NOTE
DVD Player will automatically start playing when you insert any DVD disc, MEMORY
card or USB device.
2.
Warning displays if the vehicle is moving for driver's safety.
3.
DVD Player will not only play video, but also picture and music files as well.
1.
File Management
DVD mode plays files in a) Disc b) USB c) MEMORY card (main MEMORY card slot in inner
panel).
Pause playback. Press it again to continue playback.
Stop playback. Press it to Stop playback from the current position, press it again to final
stop to the very beginning.
/
Start fast rewind or fast forward. Press one of the keys again to change the spooling
speed. Press the Play key to regain normal playback.
In DVD mode, touch it can choose Repeat chapter =>repeat title =>repeat off.
In VCD mode, touch it can choose Repeat REP 1 => REP DIR => REP ALL.
Touch it to select the subtitle language (Available only if the disc with subtitle function).
in DVD mode touch it to select the audio language (Available only if the disc with subtitle
function);In VCD mode touch it can choose MONO L---MONO R---STEREO.
In VCD mode touch it can choose PBC ON or OFF
In DVD mode touch it to enter TITLE MENU (Enable only if the DVD disc with title menu).
/
Touch it to select previous or next track.
15
/
Select the viewing angle of the touch-screen.
◆USB/SD/MMC CARD OPERATION
Insert USB/SD/MMC and play track will display as follows:
Mute the sound.
Decrease the volume.
Increase the volume.
Stop button. Press it to Stop playback
from the current position, press it again to final
stop to the very beginning
Play/pause button. Press it to pause the
track, press again to resume.
Press it button to restart a track,
FR×2×4×8×20-play will be display.
Press it button to skip to the next track.
FF×2×4×8×20-play will be display.
Press it to skip to the previous track.
Press it to skip to the next track.
Press it to activate the intro function.
You can play the beginning of every track for
10 seconds in sequence.
Press it to repeat REP 1 => REP DIR
=> REP ALL
Press it to play track randomly.
Press it to enter previous page.
Press it to enter next page.
Press it to go to folder selection.
◆AV-IN MODE
To start AV-IN Mode, tap on AV-IN button from main
menu screen.
Connect the external audio/video signal source to this unit.
Select AV-IN mode in the main menu or by pressing Mode
on the front panel.
16
Note: If there is no external video input, the TFT displays “NO SIGNAL”.
1. Press the △ / ▽ icon to adjust TFT angle.
2. Press the
icon to be back to main menu.
◆IPOD/IPHONE OPERATION
Use the supplied iPod/iPhone connection cable to connect to the USB socket on the panel to
play back iPod/iPhone audio and video. The unit turns to USB/iPod mode automatically when
an iPod/iPhone is connected.
To start iPod/iPhone mode in other modes, press MODE button repeatedly to change.
Important note
- When an iPod/iPhone is connected to the unit using supplied cable, the controls on the iPod
are disabled.
- Current setting or play mode such as playlists may influence the playing order on first
connection to the device.
- Some characters may not be correctly displayed.
CAUTION
iPod/iPhone Operation playback is the same as MP3/WMA files. To understand its operation,
please see USB/SD/MMC operation section.
iPod-music playback
In USB/iPod mode, select music button to show below the options: Playlists=>Artists=>Albums
=>Songs=>Genre=>Composer. Touch one of all options to play corresponding track.
iPod-music playback interface operation
Touch
button to return to a previous menu.
Touch RPT button once to repeat current song. Touch RPT button twice to repeat all songs.
Touch RPT button threes time to cancel repeat function.
Touch RDM button to play in random sequence. Touch RDM button again to cannel random
function.
Touch
button to go to previous page; Touch
In any time, touch
button to go to next page.
button to show the iPod-music playback interface last time.
Touch
button to mute the volume output. Touch again to resume the normal volume.
Touch + or – button to adjust the suitable volume.
Touch
or
button to start the next or previous track.
Touch
or
button to activate the fast rewind or fast forward. “FR” or”FF” will display on
the screen.
Touch
button to pause playback, touch again to continue playback.
Searching for a desired Song
You can search for a desired Song through Playlists, Artists, Albums, Songs, Genre and
Composer. Touch one of all options to play corresponding track.
Playlist: you can find recently playback music in playlist.
Artists: you can find the corresponding songs according to different artist.
Albums: you can find the corresponding songs according to different albums.
17
Songs: you can find all of songs in songs option.
Genre: you can find the corresponding songs according to different Genre.
Composer: you can find the corresponding songs according to different composer.
iPod- video playback
The unit support video playback. In USB/iPod mode, select the video option to show below the
options: Movies=>Music Video=>TV Shows=>Video Podcasts=>Rented Movies. Touch one of
all categories to play corresponding video.
Note: To play video file, your vehicle must be parked with the ignition key in the ACC or ON
position. And insert the USB and AV-IN plugging of special and cable into the USB and AV-IN
jack together.
During iPod-video playback, touch the centre of the screen, some control button will appear on
the screen, such as Play, Stop, select a track. Touch the corresponding button to confirm
operation.
◆SETTING CONTROL
Your device has default system settings. You can customize the settings to suit your personal
needs. Once you change settings, your new settings will remain until you change it again.
To start SETTING, tap
on button from main menu screen.
SOUND CONTROL
Tap SOUND button to show SOUND 1 menu.
EQUALIZER
BASS
TREBLE
BALANCE
FADER
Tap
Select EQ mode
Bass up/down
Treble up/down
Left/Right Balance Control
Front/Back Fader Control
button to show sound 2 menu.
BEEP
LOUDNESS
SUBWOOFER
18
Keypad sound setting
Set LOUD ON/OFF
Set SUBWOOFER ON or OFF
DISPLAY CONTROL
Tap DISPLAY button to show DISPLAY menu.
SCREEN Screen setting 16:9, 4:3,FULL
Backlight
Backlight setting LOW, MID, HIGH
AREA
Set AREA:EUROPE-U.S.A-SOUTH
AMERICA-RUSSIA
RADIO CONTROL
Tap RADIO button to show RADIO menu.
STEREO Set STEREO ON or OFF
LOCAL
Set LOCAL ON or OFF
GENERAL CONTROL
Tap GENERAL button to show GENERAL 1 menu.
Tap
DUAL
KEY
Set DUAL ON/OFF
Key CURRENT
TILT MODE
TILT ANGLE
CLOCK
DISPLAY
Set TILT MODE auto or manual
adjust monitor tilt angle
Set CLOCK display time
ON or OFF
button to show GENERAL 2 menu.
CLOCK
HOUR
CLOCK
SETTING
AUTO
CONNECT
19
Set 24Hour format or
12Hour format
Set CLOCK ADJUST time
Set the mobile telephone be
connected automatically or
manually with car radio.
DVD SET UP MENU
During the DVD playback, press the SETUP button to enter into the system settings main menu;
press the up or down arrow buttons to move to the highlighted menu item and select one of the
Setup Pages:
[1]. Subtitle Lang setting:
With this option you can select the preferred language for the subtitles. When the selected
language is recorded on the disc then this language will automatically be shown. If not, the first
language recorded on the disc is displayed.
[2].Audio Lang setting:
With this option you can select the preferred language for the audio output. When the selected
language is recorded on the disc (not all discs have multiple languages recorded) then this
language will automatically be played. If not, the first language recorded on the disc is played.
[3]. DVD Menu Lang setting:
With this option you can select the preferred language for the disc menu. When the selected
language is recorded on the disc then this language will automatically be selected. If not, the
first language recorded on the disc is displayed.
[4] Password:
The password for this unit is initially set to factory default 0000. If you want to change your
password, you need to enter the old password first and confirm it, and enter a new password
and confirm. WARNING: if you forget your password, there is no possibility to reset the
password again. Do not forget your password and write it down or store the password in a safe
place.
[5] Rating / PARENTAL SETUP.
For DVD discs which support the USA rating system, setting up rating control can prevent
children from watching content that might not be suitable for their age. You are asked to enter
the password when you change the rating setting. The default password is 0000.
Code
1.NONE
2.G
3.PG
4.PG-13
5.PG-R
6.R
7.NC-17
8. Adult
Description
Kid safe
General Audiences – ALL ages admitted
PARENTAL GUIDANCE SUGGESTED-Some material may not be suitable fo
r children
PARENTS STRONGLY CAUTIONED-Some material may be inappropriate fo
r children under 13
Restricted, under 17 requires accompanying parent or adult guardian.
RESTRICTED-Under 17 requires accompanying parent or adult guardian
NO ONE 17 AND UNDER ADMITTED
Above 17 Admitted
20
[6] TV SHAPE:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letterbox)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
[7] NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used.
[8] DEFAULT:
Factory reset. Set all values to Factory default values including memory and preset stations.
SYSTEM INFORMATION
Press SYSTEM button to show the information of
the system. You can view detail system information
including serial number of the software.
CALIBRATION
The calibration of the screen is useful when some
malfunction occur with the touch screen and it
needs adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to
another position, tap and hold at the center of the
new target. Repeat each time to complete the
calibration process. When the calibration has been
completed, the device switches back to the previous
operating mode and retain the previous setting. If
you press Reset button, the setting will return to
factory setting.
BLUETOOTH SECTION
Warning: Driving and having a Telephone conversation at the same time is dangerous, please
park your car before having a telephone conversation. The supplier waves any and all liability
when this warning is not followed.
To enter Bluetooth mode, you can tap Bluetooth icon on Main menu or long press the
mute/Bluetooth button on the Remote Control or press mode button on remote or on front panel.
BT Main Menu
Bluetooth disconnect mode
Bluetooth connect mode
A user can make own choice by tap the buttons.
21
Tap CALLING button to use phone functions.
Tap MUSIC button to start BLUETOOTH music player .
Tap HISTORY button to check dialed, received, missed calls .
Tap PHONEBOOK button to use phone book functions.
Pairing Mode
At the 1st time when using BLUETOOTH, you need to pair the mobile phone first.
When a phone have not been paired with the unit, the BT icon and Pairing mark will blink
continually on the panel.
When the unit have connect with phone ,the BT icon will turn on and the Mobile phone name (if
available) will be display on the panel.
According to mobile pairing device manual, after searching new device (Farenheit), select it,
input password "0000" and confirm ok, device paring is finished.
The text ‘Enter Number’ will shows on the panel after the pairing is completed. It means device
is connected and ready for BLUETOOTH communication.
Auto-connect - Disconnect
When power on the unit, the last paired phone will be connected to the device via Bluetooth
automatically, after searching about one minute, if the device cannot find the paired phone, it
will stop searching. When in standby mode (unconnected), long press Bluetooth button on
remote control to active auto-connect function and the device will search the last paired phone.
If you want to disconnect the Bluetooth connection, tap the Pairing icon PAIRING button on
Bluetooth main menu, and select phone book paring.
1. CALLING BUTTON
Tap on CALLING button to enter call mode.
In Call mode, the unit can be used as your phone. Making and receiving calls are possible with
BLUETOOTH. Simply tap phone number and tap
button to make a call, and tap
button to hang up.
1.)
Tap CLEAR button shortly to delete a wrong digit, tap the CLEAR button or press
RDM/C button on remote for 3-4 seconds to delete all the numbers at once.
2)
Tap the
button for 3-4 seconds, the device automatically makes a call to the latest
all in its call log.
Voice Transfer
During a call, you can change a call from Bluetooth
mode to phone by tapping Transfer button. To have a
call in Bluetooth mode again, tap Transfer button.
NOTE: the phonebook only supports Western
Characters. Any difference in character will be shown
such as “+, * or #”.
2. BT PHONE BOOK
The unit can downloading the data from phone automatically when the pairing between a
phone and the unit be completed.
The unit displays the data which have been
downloading from a phone.
Select a number and tap Send button to make a
calling. Press the PB-DOWN button, phonebook will
be updated and downloaded with new phonebook
3. Call history mode
Tap HISTORY button to see history mode.
The unit can download automatically all the date from
22
the mobile Phone.
Dialed /Received/Missed calls are saved In History mode .Tap Up/Down arrow load
previous/next history record.
The calls in each category are orderly saved from the latest one to the final one..
Select a number and tap Send button to enter calling mode.
4. (A2DP) Music Mode
Tap MUSIC button to listen music in Bluetooth mode.
Tap the button for ‘music’ in Bluetooth main menu.
You can select the function with the key for previous,
play / pause, stop, and next.
A2DP (Advanced Audio Distribution Profile) Music
Player
A2DP is a function which can receive the audio
frequency signal from the mobile phone, amplified by
the car audio and played out by the car speakers.
Notice: your mobile phone need to support A2DP.
Tap the buttons on the screen as shown, or press corresponding buttons (PAUSE/PLAY, STOP,
PREVIOUS/NEXT) on remote control to play, pause, play previous, or next music file.
OTHER FUNCTIONS
Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on
screen enter into main menu setting choose setting menu. choose SOUND and set subwoofer
ON to enable subwoofer.
Parking
When the car is stopped and the parking brake is working, the screen can display the video
image, otherwise the screen can't display the video image.
Back View Camera
This unit is equipped with back view camera output. The camera is used to observe the
situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the reverse
wire for back a car with the rear gear light. Rear view camera picture will be enabled when you
are backing the car.
23
NOTES ON DISC
— Only use groundless loudspeakers.
— Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your
loud speakers at higher volumes.
— Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may
damage the unit.
— Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car
body.
— (GND). using a BTL circuit and each loudspeaker must be connected with insulated cables
according the diagram.
— Loudspeaker cables and/or optional external power amplifiers must always be about 30cm.
away from the antenna and/or antenna extension parts.
— If want to display for 7” TFT, parking wire must be connected to ground.
24
TROUBLESHOOTING
Symptom
LCD
CD
General
Power does not turn
on.
(No sound is
produced.)
No sound output
when operating the
unit with amplifiers
or power antenna
attached.
Cause
Remedy
Fuse is blown
In correct wiring
Power antennal
lead is shorted to
ground excessive
current is required
or remote on the
amplifiers or power
antenna.
Nothing happens
The microprocessor
when buttons are
has malfunctioned
pressed.
due to noise, etc.
Display is not
Accurate
Panel or main unit
Connectors
are dirty
Compact disc is
Sound is bad directly dirty
after power is turned Compact disc is
on.
heavily scratched
or warped
Water droplets may
Sound is bad directly form on the internal
after power is turned lens when the car is
on.
parked in a humid
place
When deck
mechanism error, it
show ERROR 1
When disc or servo
Small LCD display
error, it show
ERROR 2
error massage
When USB error, it
show ERROR 3
When SD error, it
show ERROR 4
25
Replace with fuse of the same amperage.
If the fuse blows again, consult your store
of purchase
Consult your local retailer.
1. Turn off the unit.
2. Remove all wires attached to the
power antenna lead. Check each wire
for a possible short to ground using an
ohm meter.
3. Turn on the unit.
4. Reconnect each amplifier remote wire
to the power antenna lead one by one.
If the amplifiers turn off before all wires
are attached, use an external replay to
provide remote-on voltage (excessive
current required).
Turn off the power, Then press the [no
open] button and remove the DCP. Press
the reset button for about 2 seconds with
a thin rod.
Wipe the dirt off with a soft cloth
moistened with cleaning alcohol.
Clean the compact disc without scratches
Replace with a compact disc without
scratches.
Let it dry for about 1 hour with the power
on.
Reset the unit.
Change the disc or reset the unit.
1.Remove the USB/SD and insert it again
2. File error,please check the file.
3. Reset the unit.
TROUBLESHOOTING
SYMPTOM
NO POWER
DISC CANNOT BE
LOADED.
CAUSE
THE CAR IGNITION IS
NOT ON.
THE FUSE IS BLOWN.
REPLACE THE FUSE.
PRESENCE OF DISC
INSIDE THE PLAYER
REMOVE THE DISC IN THE PLAYER
THEN PUT A NEW UPWARD.
INSERT THE COMPACT DISC WITH THE
LABEL FACING
UPWARD.
CLEAN THE DISC OR TRY TO PLAY A
NEW ONE.
INSERTING THE DISC IN
UPSIDE DOWN.
DISC CANNOT BE
READ.
NO SOUND
THE OPERATION
KEYS DO NOT WORK.
SOUND SKIPS.
THE RADIO DOES
NOT WORK, THE
RADIO STATION
AUTOMATIC
SELECTION DOES
NOT WORK.
SOLUTION
IF THE POWER SUPPLY IS PROPERLY
CONNECTED TO THE CAR
ACCESSORY SWITCH THE IGNITION KEY
TO “ACC”.
COMPACT DISC IS
EXTREMELY DIRTY OR
DEFECTIVE.
TEMPERATURE INSIDE
THE CAR IS TOO HIGH.
COOL OFF UNTIL THE AMBIENT
TEMPERATURE RETURNS TO
NORMAL.
VOLUME IS IN MINIMUM.
ADJUST VOLUME TO A DESIRED LEVEL.
WIRING IS NOT
PROPERLY CONNECTED.
CHECK WIRING CONNECTION.
THE BUILT-IN
MICROCOMPUTER IS NOT
OPERATING PROPERLY
DUE TO NOISE.
FRONT PANEL IS NOT
PROPERLY FIX INTO ITS
PLACE.
THE INSTALLATION
ANGLE IS MORE THAN 30
DEGREES.
THE DISC IS EXTREMELY
DIRTY OR DEFECTIVE.
ADJUST THE INSTALLATION ANGLE TO
LESS THAN 30
DEGREES.
CLEAN THE COMPACT DISC/TRY TO
PLAY A NEW ONE.
THE ANTENNA CABLE IS
NOT CONNECTED THE
SIGNALS ARE TOO WEAK.
INSERT THE ANTENNA CABLE FIRMLY
SELECT A STATION
MANUALLY.
26
PRESS THE POWER BUTTON FOR
ABOUT 10 SECONDS
TO RESET THE UNIT.
TECHNICAL SPECIFICATIONS
General
Power supply:
Current consumption:
Maximum power output:
Compatible formats:
Dimensions (W x D x H) /
weight:
Working temperature
range:
ESP function:
11~16V DC
max. 10 A
52W x 4 channels (max)
DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture
CDCD-R/-RW/DVD±R/±RW playback
165*178*50 mm/2 kg
-10℃ - +60℃
10 sec. for Audio CD, 120 sec. for MP3
TFT display
Screen size:
Resolution:
Aspect ratio:
Brightness:
7 inch
480*243 dot
4:3/16:9
400 cd/m2
FM Stereo Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
Frequency range(U.S.A AREA)
Preset memory stations:
87.5 – 108MHz(Step 50KHz)
87.5 – 108MHz(Step 100KHz)
87.5 – 108MHz(Step 50KHz)
65-74MHz(Step 10KHz)
87.5 – 107.9MHz(Step 200KHz)
18
AM/MW Radio
Frequency range(EUROPE AREA):
Frequency range(SOUTH AMERICA AREA)
Frequency range(RUSSIA AREA)
Frequency range(U.S.A AREA)
Preset memory stations:
Audio specification
Frequency response:
20 Hz-20 KHz
522kHz - 1620 KHz(Step 9KHz)
520kHz - 1710 KHz(Step 10KHz)
522kHz - 1620 KHz(Step 9KHz)
530kHz - 1710 KHz(Step 10KHz)
12
Specifications are subject to change without notice. Mass and dimension are approximate.
27
Download PDF