Test Equipment Solutions Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of
quality test & measurement (T&M) equipment. We stock all major equipment types such as
spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from
all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers
for whom high performance, quality and service are key, whilst realising the cost savings that
second user equipment offers. As such, we fully test & refurbish equipment in our in-house,
traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2
year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of
combined experience, which enables us to deliver industry-leading service and support. We
endeavour to be customer focused in every way right down to the detail, such as offering free
delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan
unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher
reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and
offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off
balance sheet accounting. Both second user and rental improve the key business measure of
Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment
worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house
All products supplied by Test Equipment Solutions include:
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses).
- Free loan equipment during warranty repair, if available.
- Full electrical, mechanical and safety refurbishment in our in-house Lab.
- Certificate of Conformance (calibration available on request).
- Manuals and accessories required for normal operation.
- Free insured delivery to your UK mainland address (sales).
- Support from our team of seasoned Test & Measurement engineers.
- ISO9001 quality assurance.
Test equipment Solutions Ltd
Unit 8 Elder Way
Waterside Drive
T: +44 (0)1753 596000
F: +44 (0)1753 596001
Email: info@TestEquipmentHQ.com
Web: www.TestEquipmentHQ.com
High Performance DC Power Supplies speed and accuracy for test optimization
80-100 W GPIB
Fast, low-noise outputs
Programmable active down-programmer sinks the full rated current
Dual-range, precision low current measurement
Optional isolation and polarity reversal relays
Built-in measurements and advanced programmable features
6631B - 6634B
Protection features to ensure DUT safety
Number of outputs
0 to 8 V
0 to 20 V
0 to 50 V
0 to 100 V
0 to 10 A
0 to 5 A
0 to 2 A
0 to 1 A
5 mV
10 mV
20 mV
50 mV
4 mA
2 mA
1 mA
0.5 mA
(at 0˚ to 55˚ C unless
otherwise specified)
This series of linear-regulated
80-100 W DC power supplies is
designed to maximize the throughput
of DUTs through the manufacturing
test process. Both programming
and measurement are optimized for
speed. The active downprogrammer
can sink up to the full rated current
of the power supply, which quickly
brings the power supply output to
zero volts. The 6630B Series offers
many advanced programmable
features including stored states
and status reporting. Programming
is done using industry standard
SCPI commands via the GPIB or
RS-232. Test system integration is
further simplified by using the
VXIPlug&Play drivers. The optional
relays simplify system design and
Output ratings
Programming accuracy at 25°C ±5°C
+ Current
0.05% +
Ripple and noise (20 Hz to 20 MHz, with outputs
ungrounded or with either terminal grounded)
Voltage Normal mode
0.3 mV
3 mV
0.3 mV
3 mV
0.5 mV
3 mV
0.5 mV
3 mV
Fast mode
1 mV
10 mV
1 mV
10 mV
1 mV
15 mV
2 mV
25 mV
3 mA
2 mA
2 mA
2 mA
DC measurement accuracy via GPIB or front panel
meters with respect to actual output at 25°C ±5°C
0.03% +
2 mV
3 mV
6 mV
12 mV
Low current range
–20 mA to +20 mA
0.1% +
2.5 µA
2.5 µA
2.5 µA
2.5 µA
High current range
+20 mA to + rated I
–20 mA to –rated I
0.2% +
0.2% +
1 mA
1.6 mA
0.5 mA
1.1 mA
0.25 mA
0.85 mA
0.25 mA
0.85 mA
2 mV
2 mV
4 mV
5 mV
2 mA
1 mA
1 mA
1 mA
0.5 mV
0.5 mV
1 mV
1 mV
1 mA
0.5 mA
0.25 mA
0.25 mA
Load regulation
The optional front panel binding
posts make the 6630B Series
convenient on the R&D lab bench.
The built-in microamp measurement
system helps the engineer to easily
and accurately monitor the output
voltage and current without a
complicated test setup.
Line regulation
Transient response time Less than 100 µs (50 µs in the fast mode) for the output voltage to recover to its previous
level (within 0.1% of the voltage rating of the supply or 20 mV) following any step change in load current of up to 50%
of the output current rating of the supply.
Application Notes:
10 Practical Tips You Need to
Know About Your Power Products
Understanding Linear Power Supply
Operation (AN1554)
10 Hints for Using Your Power Supply
to Decrease Test Time
More detailed specifications at www.agilent.com/find/6630
High Performance DC Power Supplies speed and accuracy for test optimization
Single-Output: 80-100 W GPIB (Continued)
(at 0˚ to 55˚ C unless
otherwise specified)
Supplemental Characteristics
Supplemental Characteristics
for all model numbers
(Non-warranted characteristics determined by design and useful
in applying the product)
Average programming resolution
2 mV
5 mV
12.5 mV
DC Floating Voltage: Output terminals can
be floated up to ±240 Vdc maximum from
chassis ground
2.5 mA
1.25 mA
0.5 mA
0.25 mA
Sink current
10 A
Remote Sensing: Up to two volts dropped
in each load lead. Add 2 mV to the voltage
load regulation specification for each one
volt change in the positive output lead
due to load current change.
SCPI mode
0.4% +
4 mA
0.4% +
2 mA
0.4% +
1 mA
0.4% +
0.5 mA
Compatability mode
-500 mA
-250 mA
-100 mA
-50 mA
Minimum current in constant current mode*
40 mA
20 mA
8 mA
4 mA
Command-Processing Time: Average time
required for the output voltage to begin to
change following receipt of digital data is
4 ms for the power supplies connected
directly to the GPIB. (Display disabled).
Output-Programming Response Time: The
rise and fall time (10/90% and 90/10%)
of the output voltage is less than 2 ms
(400 µs in fast mode). The output voltage
change settles within 1 LSB (0.025% x
rated voltage) of final value in less than
6 ms (2 ms in the fast mode).
GPIB Interface Capabilities: IEEE-488.2,
SCPI command set and 6630A Series
programming compatability
Software Driver:
Measurement Time: Average time to
make a voltage or current measurement
is 50 ms.
25 mV
Sink current tracking
*When programming in the 6630A Series language compatibility mode.
Ordering Information
Opt 100 87 to 106 Vac, 47 to 63 Hz
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 47 to 63 Hz
Opt 230 207 to 253 Vac, 47 to 63 Hz
Opt 020 Front-panel Binding Posts
(N/A on 6631B)
Opt 760 Isolation and Reversal Relays,
only available at time of order
(N/A on 6631B)
* Opt 1CM Rack-mount Kit,
p/n 5063-9212
* Opt 1CP Rack-mount Kit with Handles,
p/n 5063-9219
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B0 Full documentation on
CD-ROM only
Opt 0B3 Service Manual
* Support rails required
p/n 1494-0060 Rack Slide Kit
E3663AC Support rails for Agilent
rack cabinets
Agilent Models: 6631B, 6632B, 6633B, 6634B
Input Power (full load): 3.5 A, 250 W
Regulatory Compliance: Complies with
EMC directive 89/336/EEC (ISM 1B).
Warranty Period: One year
Size: 425.5 mm W x 88.1 mm H x
364.4 mm D (16.8 in x 3.5 in x 14.3 in).
Weight: Net, 12.7 kg (28 lb) net;
15.0 kg (33 lb) shipping
Terminal Strip Detail
Output 2 & 3
- -S
Screw Size:
M35 x 0.6
More detailed specifications at www.agilent.com/find/6630
Your Requested Excerpt from the
Agilent System and Bench Instruments Catalog 2006
The preceding page(s) are an excerpt from the 2006 System
and Bench Instruments Catalog. We hope that these pages supply
the information that you currently need. If you would like to
have further information about the extensive selection of Agilent
DC power supplies, please visit www.agilent.com/find/power to print
a copy of the complete catalog, or to request that a copy be sent
to you. You will also find a lot of other useful information on
this Web site.
In the full System and Bench Instruments Catalog, you will
find that Agilent offers much more than DC power supplies. This
catalog contains detailed technical and application information
on digital multimeters, DC power supplies, arbitrary waveform
generators, and many more instruments. If you need basic, clean,
power for your lab bench, it’s there. In each power product
category we have also integrated the capabilities you need for
a complete power solution, including extensive measurement
and analysis capabilities.
Please give us a call at your local Agilent Technologies sales
office, or call a regional office listed, for assistance in choosing
or using Agilent power products.
Keep up to date with Agilent’s Test and Measurement Email Updates
As an Email Update subscriber, you will receive periodic
customized email updates that match the areas of interest
that you have specified. Your update will include products
and services, applications and support information, events and
promotions. Sign up today at www.agilent.com/find/emailupdates.
Check off DC power supplies, AC power sources or electronic
loads on your registration form, and we will promptly let you
know what’s new in power products. Our Privacy Statement at
www.agilent.com/go/privacy describes our commitment to you
regarding your privacy.
For more information on Agilent
Technologies’ products, applications
or services, please contact your local
Agilent office. The complete list is
available at:
Phone or Fax
United States:
(tel) 800 829 4444
(fax) 800 829 4433
(tel) 877 894 4414
(fax) 800 746 4866
(tel) 800 810 0189
(fax) 800 820 2816
(tel) 31 20 547 2111
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
(tel) (080) 769 0800
(fax) (080) 769 0900
Latin America:
(tel) (305) 269 7500
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100
(fax) (65) 6755 0042
Email: tm_ap@agilent.com
Contacts revised: 09/26/05
Product specifications and descriptions in
this document subject to change without
© Agilent Technologies, Inc. 2006
Printed in the USA, February 8, 2006
Agilent Technologies
Download PDF