Drash | D-1000B | Literature

S
DECONTAMINATION
SYSTEMS
Reeves decontamination shelter systems and
accessories include the latest in cutting edge NBC
decontamination equipment and products. Most of
Reeves Single, 2-Lane and 3-Lane Decon Systems
use military-grade DRASH shelters, which deploy
in minutes on any terrain and can withstand extreme
weather and temperature conditions. A full line of NBC
decontamination equipment and accessories, which
range from water heating systems, roller systems and
containment berms to patient tracking, lighting and
environmental control systems, also compliment the
systems. All of Reeves decontamination equipment is
held to high industry quality standards and measurements.
CONTENTS
Decontamination Systems
Water Heaters / Injection Systems
Bladders and Water Supply Kits
Berms and Elevation
Water Management
Roller Systems
Patient Modesty and Tracking
Shelter Heating
Lighting
Patient and Remains Movement
3
9
11
13
15
16
17
21
23
25
DECONTAMINATION SYSTEMS
Reeves Single, 2-Lane and 3-Lane Decon Systems use state-of-the-art shelter and decon technology to ensure that systems provide thorough NBC decontamination for a maximum number of
patients in a minimum amount of time.
3
DECONTAMINATION SYSTEMS AND ACCESSORIES
Single and Double-Stall PVC Shower Systems
The Reeves Single-Stall and Double-Stall PVC Shower Systems provide
a low-cost and lightweight solution to patient and personnel decontamination. Capable of being set up by only one (1) person within a matter of
minutes, these economical systems are perfect for responding to smallscale hazardous materials incidents with minimal personnel. The Reeves
Single-Stall and Double-Stall PVC Shower Systems are also ideal for
use as field showers.
Features:
•Effective for NBC decontamination of one (1) or two (2) ambulatory
patient(s) at a time
•Enough inside space to comfortably decontaminate individual
personnel outfitted in any level of protection
•Constructed of rugged and durable Schedule 80 PVC piping with
quick-connect fittings for a quick and easy assembly
•Integrated 2.5 gallon-per-minute showerheads supply the water flow
necessary for thorough decontamination
•PVC shower frame sits inside of a collapsible-wall berm for complete
run-off containment
•Privacy curtain encases PVC shower frame to provide patient
modesty
•Integrated female garden hose connection allows for easy water
hook up
Components:
Single-Stall System
RDPK0120
•Single-Stall Schedule 80 PVC Shower (includes 2 showerheads,
privacy curtain and transport bags)
•4’W x 4’L x 12”H Collapsible-Wall Primary Containment Berm
•28”W x 40”L x 6”H Patient Elevation Grid (1)
•30 GPM Submersible Water Pump with 25-Foot, 1 ½” Discharge Hose
•35-Foot, ½” Red Supply Hose with Garden Hose Fittings (1)
Double-Stall System
RDPK0125
•Double-Stall Schedule 80 PVC Shower (includes 4 showerheads,
privacy curtains and transport bags)
•4’W x 8’L x 12”H Collapsible-Wall Primary Containment Berm
•28”W x 40”L x 6”H Patient Elevation Grids (2)
•30 GPM Submersible Water Pump with 25-Foot, 1 ½” Discharge Hose
•35-Foot, ½” Red Supply Hose with Garden Hose Fittings (1)
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
4
Hospital Response
Systems
Reeves Single, 2-Lane, 2/3-Lane and 3Lane Hospital Response Decontamination
Systems are fully operational systems that
effectively provide NBC decontamination
facilities for First Receivers deployed next
to a hospital or emergency facility during a critcal incident. Single Responder
Series Shelters are also available. Visit
www.ReevesEMS.com/ResponderSeries
to learn more.
5
Individual
2-Lane
2-Lane w/ Undress/Redress
Part Number (Color)
Description
RDPK0001 (Blue)
RDPK0002 (Blue)
RDPK0003 (Blue)
6.8’W x 5’L x 8.3’H system for one to
two ambulatory patients or one nonambulatory patient
10’W x 12’L x 8.8’H system for male
and female ambulatory and nonambulatory patients.
10’W x 20’L x 8.8’H system for male
and female ambulatory and nonambulatory patients w/ undress /
redress areas
Total System Weight
Plumbing
210 lbs. / 95.3 kg
500 lbs. / 226.8 kg
650 lbs. / 294.8 kg
1-Line Integrated Plumbing Package 4 showerheads / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
Lane Curtain
2-Lane Package
2-Lane Package
2-Lane Package
Cross Curtain [sold in sets of two (2)]
Collapsible-Wall Primary
Containment Berm
Patient Roller System
Patient Elevation Grids
(2’W x 5’6”L x 3.5”H)
Patient Elevation Grids
(2’W x 8’L x 3.5”H)
Patient Elevation Grids
(3’W x 8’L x 3.5”H)
N/A
1 Set
3 Sets
9’W x 6’L x 8”H
13’W x 14’L x 8”H
13’W x 22’L x 8”H
N/A
N/A
N/A
Three (3)
Five (5)
Five (5)
N/A
Five (5)
Ten (10)
N/A
N/A
N/A
Patient Elevation Grids
(3’W x 5.6’L x 3.5”H)
30 GPM Submersible Water Pump
w/ 25-foot, 1.5” discharge hose
35-foot, 1/2” Supply Hoses
w/ cam lock Fittings
Water Supply Adapter Kit
Shelter
N/A
N/A
N/A
One (1)
One (1)
One (1)
One (1) Red
One (1) Red, One (1) Black
One (1) Red, One (1) Black
One (1)
One (1)
One (1)
Exterior Dimensions
8.8 W x 5 L x 11 H (ft)
2.6 W x 1.5 L x 2.5 H (m)
11.8 W x 12 L x 10.5 H (ft)
3.6 W x 3.7 L x 3.2 H (m)
11.8 W x 20 L x 10.5 H (ft)
3.6 W x 6 L x 3.2 H (m)
Interior Dimensions
6.8 W x 5 L x 8.3 H (ft)
2 W x 1.5 L x 2.5 H (m)
10 W x 12 L x 8.8 H (ft)
3 W x 3.7 L x 2.7 H (m)
10 W x 20 L x 8.8 H (ft)
3 W x 6 L x 2.7 H (m)
DECONTAMINATION SYSTEMS AND ACCESSORIES
2/3-Lane
2/3-Lane w/ Undress/Redress
3-Lane
3-Lane w/Undress/Redress
RDPK0004 (Blue)
RDPK0005 (Blue)
RDPK0006 (Blue)
RDPK0007 (Blue)
11.5’W x 10’L x 8.3’H system for male
and female ambulatory and nonambulatory patients.
11.5’W x 20’L x 8.3’H system for male
and female ambulatory and nonambulatory patients w/ undress /
redress areas
14.5’W x 12’L x 8.8’H system for male
and female ambulatory and nonambulatory patients
14.5’W x 20’L x 8.8’H system for male
and female ambulatory and nonambulatory patients w/ undress /
redress areas
905 lbs. / 410.5 kg
1250 lbs. / 566.9 kg
1065 lbs. / 483.1 kg
1405 lbs. / 637.3 kg
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
3-Lane Package
3-Lane Package
3-Lane Package
3-Lane Package
1 Set
3 Sets
1 Set
3 Sets
14’W x 12’L x 8”H
14’W x 22’L x 8”H
17’W x 14’L x 8”H
17’W x 22’L x 8”H
12’ Collapsible Patient Roller System
20’ Collapsible Patient Roller System
12’ Collapsible Patient Roller System
20’ Collapsible Patient Roller System
Four (4)
Two (2)
N/A
N/A
N/A
Four (4)
N/A
N/A
N/A
Four (4)
Four (4)
Eight (8)
Four (4)
Two (2)
Four (4)
Four (4)
One (1)
One (1)
One (1)
One (1)
One (1) Red, One (1) Black
One (1) Red, One (1) Black
One (1) Red, One (1) Black
One (1) Red, One (1) Black
One (1)
One (1)
One (1)
One (1)
13.5 W x 10 L x 11 H (ft)
4.1 W x 3 L x 3.4 H (m)
13.5 W x 20 L x 11 H (ft)
4.1 W x 6 L x 3.4 H (m)
16.5 W x 12 L x 10.5 H (ft)
5.1 W x 3.7 L x 3.2 H (m)
16.5 W x 20 L x 10.5 H (ft)
5.1 W x 6 L x 3.2 H (m)
11.5 W x 10 L x 8.3 H (ft)
3.5 W x 3 L x 2.5 H (m)
11.5 W x 20 L x 8.3 H (ft)
3.5 W x 6 L x 2.5 H (m)
14.5 W x 12 L x 8.8 H (ft)
4.4 W x 3.7 L x 2.7 H (m)
14.5 W x 20 L x 8.8 H (ft)
4.4 W x 6 H x 2.7 H (m)
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
6
7
DECONTAMINATION SYSTEMS AND ACCESSORIES
First Response Systems
Reeves 2-Lane, 2/3-Lane and 3-Lane
First Response Decontamination Systems
provide NBC decontamination facilities for
First Responders who need a fully operational system that can be deployed even
in remote locations. Single Responder
Series Shelters are also available. Visit
www.ReevesEMS.com/ResponderSeries
to learn more.
2-Lane
2/3 Lane
3 Lane
Part Number (Color)
RDPK0008 (Blue)
RDPK0009 (Blue)
RDPK0010 (Blue)
Description
10'W x 16'L x 8.8'H system for male
and female ambulatory or nonambulatory patients
11.5'W x 15'L x 8.3'H system for male
and female ambulatory and nonambulatory patients
14.5'W x 16'L x 8.8'H system for male
and female ambulatory and nonambulatory patients
Total System Weight
1320 lbs. / 598.7 kg
1500 lbs. / 680.4 kg
1650 lbs. / 748.4 kg
Plumbing
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
2-Line Integrated Plumbing Package 8 showerheads / 2 black spray
wands / 2 red spray wands
Curtain
2-Lane Set
3-Lane Set
3-Lane Set
Collapsible-Wall Primary
Containment Berm
13'W x 17'L x 8"H
14'W x 17'L x 8"H
17'W x 17'L x 8"H
Patient Roller System
N/A
16' Collapsible Patient Roller System
16' Collapsible Patient Roller System
Patient Elevation Grids
(2'W x 8'L x 3.5"H)
Ten (10)
Four (4)
N/A
Patient Elevation Grids
(3'W x 8'L x 3.5"H)
N/A
Four (4)
Eight (8)
30 GPM Submersible water Pump
with 25-foot, 1.5" discharge hose
One (1)
One (1)
One (1)
Multi-Fuel Water Heater w/ Decon
Solution Injection System
165,000 BTU, Up to 18 GPM
water heater
425,000 BTU, up to 28 GPM
water heater
425,000 BTU, up to 28 GPM
water heater
35-foot, 1/2" water supply hoses
One (1) Red, One (1) Black
One (1) Red, One (1) Black
One (1) Red, One (1) Black
Water Supply Adapter Kit
One (1)
One (1)
One (1)
11.8 W x 16 L x 10.5 H (ft)
3.6 W x 4.9 L x 3.2 H (m)
13.5 W x 15 L x 11 H (ft)
4.1 W x 4.6 L x 3.4 H (m)
16.5 W x 16 L x 10.5 H (ft)
5.1 W x 4.9 L x 3.2 H (m)
10 W x 16 L x 8.8 H (ft)
3 W x 4.9 L x 2.7 H (m)
11.5 W x 15 L x 8.3 H (ft)
3.5 W x 4.6 L x 2.5 H (m)
14.5 W x 16 L x 8.8 H (ft)
4.4 W x 4.9 L x 2.7 H (m)
Shelter
Exterior Dimensions
Interior Dimensions
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
8
WATER HEATERS/INJECTION SYSTEMS
165,000 BTU G2S Water Heater
RDHW0001; With Solution Injection System: RDHW0002
Dimensions: 36”L x 30”W x 34”H
Weight*: 280 lbs. (w/hoses), 260 lbs. (w/o hoses)
Standard Color: Black
425,000 BTU G2 Water Heater
RDHW0003; With Solution Injection System: RDHW0004
Dimensions: 47”L x 30”W x 40”H
Weight*: 465 lbs. (w/ hoses); 445 lbs. (w/o hoses)
Standard Color: Black
Reeves G2S and G2 multi-fuel, self-heating water systems are portable,
easy to maneuver and built for field use. The units are an ideal way to
supply multiple decontamination showers or multiple field showers and
sinks with heated water, thus increasing the safety and comfort of both
patients and personnel.
9
Features Include:
•Multi-Fuel (diesel, kerosene, home heating oil, and JP4)
•Flow rate of up to 18 (G2S) or 28 (G2) gallons per minute
•4 (G2S) or 10 (G2) gallon on-board fuel tank with drain plug
•Instructional panel for ease of operation
•Built-in anti-scald protection device factory pre-set at 110ºF
•Thermostatically-controlled
•Operator’s panel with color-coded temperature and pressure gauges
•Heater ignited by solid state electrical system (NO FLAME) that
ignites upon water flow
•Burner motor is a 1/5 hp (G2S) or 1/4 hp (G2), 120 V, 60hz, 1 ph and
runs at 3350 (G2S) or 3450 rpm (G2)
•Inline GFCI protection
•Fuel filter with water separator
•Modular design – ruggedized for field use
•Man portable and easy to maneuver
•Mounted on four (4) hardened tires with hand brake for safety
•1 ½” Female NST inlet with swivel and tethered compressed air
adapter for winterization purposes
•Unit will safely accept incoming water pressure of up to 125 psi
•System can be adapted for use with multiple water sources that
provide adequate water pressure and flow (adapters not included)
•Two (2) (G2S) or four (4) (G2) discharge outlets with male cam lock
fittings and tethered caps
•Includes two (2) 35-foot, ½” supply hoses with cam lock fittings that
provide heated water and solution to Reeves shower plumbing
•Discharge outlets and supply hoses can be factory modified in order
to supply heated water to non-Reeves shower systems
Features of Optional Injection System:
• Unit includes a non-electric, volumetric proportional injection system
• Injection rate adjustable on board -- even while water is flowing
• Injection system designed to operate upon water flow
• Chemically resistant to Sodium Hypo-Chloride
• Built-in mixing chamber
• Easy to use black manual bypass (ON/OFF) lever
• In-line 100 micron filtration system
• Automatic air relief valve
• Flow range: 4.2 to 600 gallons per hour
• Injection rate: 1% (1:100) to 10% (1:10)
• Injector operating pressure: 10-85 psi
• Heavy-duty siphon hose
*Note: Item weight increases by five pounds with mobile injection unit.
DECONTAMINATION SYSTEMS AND ACCESSORIES
105,000 BTU Pro-100 Propane Water Heater
Mobile Injection Unit
The 105,000 BTU Pro-100 Propane Water Heater is portable, lightweight,
easy to maneuver and designed for field use. The unit provides a reliable and affordable way of supplying hot water in a matter of seconds to
one (1) or two (2) person decontamination showers, hygiene showers,
or hygiene sinks for increased safety and comfort in the field.
The free-standing, portable Reeves Mobile Injection Unit allows
responders to inject soap or bleach solution into any water supply for
more effective patient decontamination, eliminating the need for separate
solution applicators and the personnel to operate them.
RDA0027
RDHW0025
Features Include:
•105,000 BTU’s of FAST HEAT ... unlimited hot water in seconds
•Provides up to six (6) gallons per minute of heated water
•Tough mil-spec stainless steel construction for extra durability
•Hot water increases comfort and reduces risk of hypothermia
•Large control knob allows easy water temperature adjustment even
with gloves on
•Easy to use – just connect to water source (hose, truck, hydrant) and
push “ignite” button
•Self-contained design – No electric power required (ignitor requires
AA battery – included)
•Compact size for easy loading and transport; rugged cart for easy
on-site positioning
•Includes 1.5-foot, ½” garden hose at inlet and 20-foot, ½” garden hose
at outlet
•Propane tank not included
Dimensions: 13” x 14” x 24” (cart 40” high)
Weight: 130 lbs. with cart
Features Include:
•Non-electric, volumetric, proportional chemical injection system in
hardened black Pelican case
•Rugged and durable Mil-Spec case constructed of copolymer
polypropylene structural resin
•Telescoping handle and heavy-duty wheels on case make unit
very portable
•Injection system designed to operate upon water flow
•Chemically resistant to Sodium Hypo-chloride
•Built-in mixing chamber
•Easy-to-use black manual bypass (ON/OFF) lever
•In-line 100 micron filtration system
•Automatic air relief valve
•Flow range: 4.2 to 600 gallons per hour
•Injection rate: 1% (1:100) to 10% (1:10)
•Injection rate can be adjusted while water is flowing through system
•Operating pressure: 10-85 psi
•Heavy-duty siphon hose
•Onboard 3-gallon solution tank
•Includes one (1) male cam lock inlet and one (1) male
cam lock outlet
•Includes ½” inlet and outlet hoses
Dimensions: 11.3”L x 20.5”W x 32.5”H
Weight: 55 lbs.
Standard Color: Black
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
10
BLADDERS AND WATER SUPPLY KITS
Box-Style Waste Water Bladders
The self-rising Reeves Box-Style Waste Water Bladder stores contaminated run-off water to prevent contamination of the surrounding environment.
Features Include:
•Various sizes hold from 110 - 10,000 gallons of waste water
•Box-style design is tough, compact, lightweight, easily deployed, and field repairable
•Constructed of PVC-coated 28 oz. heavy-duty Panama weave, Rip-Stop woven polyester
•Seams are heat-seal welded and 1.5” overlapped to provide maximum strength
•Includes Bladder Adapter Kit in red transport bag
•Inlet and outlet connections with shut-off valves ensure filling and emptying without
contaminated spillage
•Connections will accommodate both 1 ½” NST fire hose and ¾” garden hose
•Uses reinforced nylon loops at various locations for anchoring
•Field repair patch kit also included
Item No. RDB0001RDB0002RDB0003RDB0004RDB0005RDB0006RDB0007RDB0008
Capacity
110g/400lit
150g/570lit
300g/1140lit
600g/2300lit
1200g/4500lit
1800g/6800lit
2500g/9500lit
3000g/11300lit
Weight*
25 lbs.
28 lbs.
35 lbs.
45 lbs.
65 lbs.
80 lbs.
95 lbs.
105 lbs.
Filled Dim.
3.3’x5’x12”
4’x5’x12”
4’x6’x20”
5’x8.3’x23”
6’x12.4’x26”
7.5’x15’x26”
7’x19’x30”
8’x17.5’x34”
Ship. Dim.
11”x11”x23”
11”x11”x24”
12”x12”x24”
14”x14”x28”
15”x16”x30”
18”x18”x32”
20”x20”x35”
22”x22”x36”
Box-Style Fresh Water Bladders
The self-rising Reeves Box-Style Fresh Water Bladder stores water that can be pumped into
hygiene showers and sinks for use in the field.
Features Include:
•Various sizes hold from 110 - 10,000 gallons of fresh water
•Box-style design is tough, compact, lightweight, easily deployed, and field repairable
•Constructed of PVC-coated 28 oz. heavy-duty Panama weave Rip-Stop woven polyester
•Seams are heat seal welded and 1.5” overlapped to provide maximum strength
•Includes Bladder Adapter Kit in red transport bag
•Inlet and outlet connections with shut-off valves make filling and emptying quick and easy
•Connections will accommodate both 1 ½” NST fire hose and ¾” garden hose
•Uses reinforced nylon loops at various locations for anchoring
•Field repair patch kit also included
Item No. RDB0031 RDB0032 RDB0033RDB0034 RDB0035 RDB0036RDB0037RDB0038
Capacity
11
110g/400lit
150g/570lit
300g/1140lit
600g/2300lit
1200g/4500lit
1800g/6800lit
2500g/9500lit
3000g/11300lit
Weight*
25 lbs.
28 lbs.
35 lbs.
45 lbs.
65 lbs.
80 lbs.
95 lbs.
105 lbs.
Filled Dim.
3.3’x5’x12”
4’x5’x12”
4’x6’x20”
5’x8.3’x23”
6’x12.4’x26”
7.5’x15’x26”
7’x19’x30”
8’x17.5’x34”
Ship. Dim.
11”x11”x23”
11”x11”x24”
12”x12”x24”
14”x14”x28”
15”x16”x30”
18”x18”x32”
20”x20”x35”
22”x22”x36”
DECONTAMINATION SYSTEMS AND ACCESSORIES
Water Supply Adapter Kit
Bladder Retrofit/Adapter Kit
The Reeves Water Supply Adapter Kit allows users to flow water from a
hydrant or garden hose outlet through a Reeves water heating system
or directly into the integrated plumbing of a Reeves Decontamination
Shelter or Field Shower.
The Reeves Bladder Retrofit/Adapter Kit allows for both a 1 ½” NST fire
hose and a ¾” garden hose to be connected to the inlet or outlet of any
Reeves Box-Style Containment Bladder made prior to May 2007. The Kit
ensures that the filling and emptying of any Reeves first generation Waste
Water Bladder can be done without contaminated spillage. Additionally,
it makes the filling and emptying of any Reeves first generation Fresh
Water Bladder quick and easy.
RDHW0020
RDPK0525
The Kit is made up of a black nylon storage bag containing the following
components:
•2 ½” X 1 ½” NST Brass Hydrant Reducer
•1 ½” x ¾” GHT Brass Reducer
•1 ½” x 1 ½” Double Male - Brass
•Adjustable Brass Hydrant Wrench
•¾” x ¾” Double Female GHT - Brass
•¾” x ¾” Double Male GHT - Brass
•GHT Gated “Y” with Ball Valves - Brass
•¾” FGHT x ½” Male Cam 36” Adapter Hoses (2)
Dimensions: 20”L x 12”W x 7”H
Weight: 9 lbs.
The Kit is made up of a red nylon transport bag containing the following
components:
Inlet
•Plastic Red Cap with 1 ½” Bulk Head Fitting
•1 ½” Male x 1 ½” Female 90° PVC Elbow
•1 ½” PVC Nipple
•1 ½” Double Female PVC Ball Valve
•1 ½” Male NPT x 1 ½” Female NST Swivel - Black Aluminum
•1 ½” Male NST x ¾” Female GHT - Black Aluminum
Outlet
•1 ½” PVC Nipple
•1 ½” Double Female PVC Ball Valve
•1 ½” Male NPT x 1 ½” Male NST - Black Aluminum
•1 ½” Female NST x ¾” Male GHT - Black Aluminum
Dimensions: 14”W x 6”L x 5”H
Weight: 5 lbs.
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
12
BERMS AND ELEVATION
Collapsible-Wall Primary Containment Berms
Deluxe Berm Repair Kit
Reeves durable, instantly deployable 8” and 12” Collapsible-Wall Primary
Containment Berms are guaranteed to contain all of the contaminated
run-off water from your personnel or patient decontamination systems
and field showers. They are also ideal for a variety of industrial
applications, including the containment of various acids, alkalines and
petroleum products. Reeves berms are custom made by the square foot
to fit your unique Homeland Security or Industrial requirements.
The Deluxe Berm Repair Kit allows for fast and easy field repair of
Reeves Collapsible-Wall Containment Berms.
Item No. assigned according to individual custom made product.
Features Include:
•Constructed of 18 oz. Rip-Stop vinyl (heavier 30 oz. versions are
also available)
•Free-standing with standard 8” side walls (12” walls are also available)
•Flexible support legs hold up walls, yet collapse easily for storage
•Support legs standard on exterior (also available on interior)
•Lightweight and compact for easy storage
•Instant deployment without tools or air bottles
•Includes yellow safety markings on sidewalls and support legs for
visibility
•Can be totally decontaminated
•Includes one (1) 3/4” threaded male drain port with cap in each corner
Dimensions: Individually custom made by square foot.
Containment Volume of 8” Wall Models: 5.61 Gallons Per Square Foot,
Containment Volume of 12” Wall Models: 7.48 Gallons Per Square Foot
Standard Color: Black with Yellow Safety Markings
13
RDCB0017
The Kit is made up of a 16” heavy-duty tool box containing the following
components:
•8 oz can of HH-66 vinyl cement with brush-in-can
•10 square feet of repair material
•Model #1220HS heat gun with slotted heat spreader
•2” single-arm silicon seam roller
•8.5” stainless steel scissors
•6” industrial grade utility knife
•Three (3) sheets of 80D sand paper
•Repair instructions
Weight: 15 lbs.
DECONTAMINATION SYSTEMS AND ACCESSORIES
3.5” Elevation Grids
6” Elevation Grid
Reeves 3.5” Elevation Grids provide the ideal solution for preventing
patients and personnel from coming in contact with contaminated run-off
water within the containment area of any decontamination system.
The Reeves 6” Elevation Grid provides the ideal solution for preventing
patients and personnel from coming in contact with contaminated run-off
water within the smaller containment area of any single or double-stall
field shower or decontamination system.
Item No. assigned according to product dimensions (see below).
RDFG0001
Features Include:
•Grids are 3.5” high to prevent patients and personnel from standing in
contaminated run-off water
•Flow-through design with feet on bottom allows for a .75” clearance
that prevents water from building up along sides of grids
•Feet can be removed in order to stack grids when additional height
is needed
•Structural black foam polyethylene (high-density plastic) construction
resists oils, grease and chemical corrosion
•Slip-resistant surface for patient safety
•Rectangular openings on top of grids are small enough for canes and
walkers to move across
•Available in a variety of sizes to accomodate the needs of emergency
response personnel
Features Include:
•Grids are 6” high to prevent contact with contaminated run-off in
smaller containment areas where water levels can rise rapidly
•Flow-through design prevents run-off water within containment area
from building up along sides of grid
•Structural black foam polyethylene (high-density plastic) construction
resists oils, grease and chemical corrosion
•Slip-resistant surface for patient safety
Dimensions: 2.3’W x 3.3’L
Weight: 22 lbs.
Standard Color: Black
Dimensions: 2’W x 3’L (RDFG0002); 2’W x 5.5’L (RDFG0003);
3’W x 5.5’L (RDFG0004); 2’W x 8’L (RDFG0005);
3’W x 8’L (RDFG0006)
Weight: 12 lbs. (RDFG0002); 21 lbs. (RDFG0003); 31 lbs. (RDFG0004);
30 lbs. (RDFG0005); 45 lbs. (RDFG0006)
Standard Color: Black
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
14
WATER MANAGEMENT
50-Foot Fire Hose
RDA0051
30 GPM Submersible Water Transfer Pump
RDP0001
The Reeves Submersible Water Transfer Pump prevents contaminated
water run-off levels from coming in contact with patients or personnel
who are standing on elevation grids within the containment area of the
decontamination shelter or field shower.
Features Include:
•Maximum pump capacity of 30 gallons per minute (GPM) or 1800
gallons per hour (GPH)
•Designed for 115V, 60Hz operation and requires an individual branch
circuit of 15 amperes or more
•Built-in GFCI plug in power cord
•Fully automatic operation with a “smart” controller that allows pump
to cycle
•Pumps water down to about .25” deep
•Motor is equipped with an automatically resetting thermal overload
protector that prevents burn-up
•Constructed of high-impact, corrosion-resistant plastic
•Screened inlet prevents large solids from entering pump
•Built-in check valve to prevent backward flow of contaminated liquids
•Polyethylene platform attached to base provides stability in
moving water
•Includes 25-foot, single-jacketed 1 ½” NST discharge hose
Dimensions: 12”W x 12”L x 14”L
Weight: 20 lbs.
Features Include:
•Double jacket construction
•Warp yarn consists of staple polyester yarn
•Filler yarns constructed of high strength, low elongation, filament
polyester to reduce weight and increase flexibility
•Polymer fill provides additional abrasion resistance
•Rubber lining constructed of single-ply extruded tube of synthetic
rubber compounded to resist ozone
•National Standard Thread (NST) couplings constructed of
coated aluminum
•Size: 1.5”; Bowl Size: 1.9”
•Test Pressure: 400psi
•Service Test Pressure: 200psi
•Elongation: 5%
•Burst Test: 600psi
•Kink Test: 400psi
Weight: 18 lbs.
Color: White
Flow-Thru Decon Scrub Brush
RDA30965
The Flow-Thru Decon Scrub Brush is used to thoroughly scrub the body
during the decon process without damaging the patient’s skin. Super
soft feather tip bristles, a Grip Tech handle and side protective bumpers
make this brush gentle and easy to use. Additionally, a two-position water
control valve allows for maximum control.
Weight: 5 lbs.
15
DECONTAMINATION SYSTEMS AND ACCESSORIES
ROLLER SYSTEMS
Collapsible Patient Roller Systems
The Reeves Collapsible Patient Roller System is a rapidly-deployable,
height-adjustable, collapsible system that allows non-ambulatory
patients to roll easily through the decontamination process on any
standard wooden or plastic backboard.
Features Include:
•Collapses to a fraction of its deployed length
•Weight capacity of 300 pounds per linear foot
•Eight to 24-foot long models available
•Safer than placing backboards and litters on
saw horses
•Rollers can be linked together to form a longer system
•Accommodates all standard backboards
•Height adjustable from 32” to 44”
•Articulating frame – flexible from side-to-side
•Constructed of corrosion-resistant aluminum
•Black PVC coating on every roller to
prevent slipping
•Legs spaced at four (4) feet when fully expanded
•Heavy duty 5” x 1.5” casters with swivel lock pedal
brakes allow for easy movement
•Patient stops at both ends for safety
Description
8 Foot
12 Foot
16 Foot
20 Foot
24 Foot
Item No.
RDR0001
RDR0002
RDR0003
RDR0004
RDR0005
Dimensions 8’L x 2’W
Expanded
12’L x 2’W
16’L x 2’W
20’L x 2’W
24’L x 2’W
Dimensions
Collapsed
2.6’L x 2’W 3.75’L x 2’W 4.8’L x 2’W
5.9’L x 2’W 7’L x 2’W
Weight
185 lbs.
360 lbs.
255 lbs.
310 lbs.
410 lbs.
5-Foot Rigid-Frame Sectional Roller System
RDR0007
The Reeves 5-Foot Sectional Roller System is a rigid, height-adjustable,
interlocking system that allows non-ambulatory patients to roll easily
through the decontamination process on any standard pole litter or
backboard.
Features Include:
•Forty (40) 1.5” diameter aluminum rollers per 5-foot section
•Only 0.125” between rollers – ALL standard pole litters and
backboards can roll directly on this system
•Patients can roll over this system with no litter or board at all
if necessary
•Frame constructed of corrosion-resistant black
powder-coated aluminum
•Sealed stainless steel bearings
•Equipped with two (2) aluminum folding legs with black powder coat
•Folding legs have rubber feet and span 20.5” in width
•Height adjustable from 34” to 43”
•Sections can be interlocked to form a longer system
Dimensions: 2’W X 5’L
Weight: 76 lbs.
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
16
PATIENT MODESTY AND TRACKING
QWIK-COVER Pre/Post Combo Decon Kits – Series 2
Youth Size: RDPW0240; Adult Size: RDPW0245; Large Adult Size: RDPW0250
Maximize decontamination shower throughput, protect patient modesty
throughout the entire decontamination process and track patient belongings using the QWIK-COVER Pre/Post Combo Decon Kit.
Features and benefits include:
•One QWIK-COVER Pre-Decon Kit
•One QWIK-COVER Post-Decon Kit
•Kit connected in an easy-to-use saddlebag design
•Perforation between kits allows user to separate when needed
Dimensions (per kit): 13”W x 14.5”L x 1.5”H
Weights (per kit):
Youth Size: 1 lb.
Adult Size: 1.34 lbs.
Large Adult Size: 1.6 lbs.
Standard Color: Red/Green
17
DECONTAMINATION SYSTEMS AND ACCESSORIES
QWIK-COVER Pre-Decon Kits – Series 2
QWIK-COVER Post-Decon Kits – Series 2
Maximize decontamination shower throughput, protect patient modesty
during the initial stages of the decontamination process and track patient
belongings using the QWIK-COVER Pre-Decon Kit.
Maximize decontamination shower throughput and protect patient modesty during the final stages of the decontamination process using the
QWIK-COVER Post-Decon Kit.
Features and benefits include:
•Kit assists in increasing patient safety and decontamination
throughput by facilitating immediate undress in space outside
decontamination system
•Ambulatory victim can cover up, disrobe in privacy, and load his/her
clothing and personal valuables into SECUR-ID Property Bags that
include identification receipts to wear over wrist
•Tear-away wrist receipts and body of bag have matching serial
numbers and bar codes for tracking purposes
•“QWIK-TRIAGE” and patient management system incorporated into
wrist receipt
•Bags have a true adhesive, tamper-proof seal
•Cover garment is 100% opaque to insure privacy
•Garment, property bags and Zip-lock carry bag constructed of Linear
Low-Density Polyethylene (LLPDE)
•LLPDE is an ideal plastic for storage as it will not rot and is very
resistant to extreme temperatures
•Red color indicates that victim has not been processed
through showers
•Garment slides over head allowing easy removal of clothing
•Openings for arms are adjustable via perforations
•Garment length may be shortened via perforations at bottom
•Victim can rip perforations at front of garment for fast and easy
removal without pulling possible contaminants over face
•Each kit contains a red cover garment, Large SECUR-ID Decon
Property Bag and Small SECUR-ID Decon Property Bag
•Red pictographic instructions on front of kit eliminate language barriers
•Youth size garment designed for patient height of 42” – 54” and
maximum girth of 40”
•Adult size garment designed for patient height of 54” – 66” and
maximum girth of 66”
•Large Adult size garment designed for patient height of 66” – 84”
and maximum girth of 76”
Features and benefits include:
•Kit helps move ambulatory victims more smoothly and rapidly through
final stage of decontamination process
•Ambulatory victim can dry off, cover up, and put on foot protection
before exiting decontamination area
•Each victim dries off with two (2) single-use, high absorbency 22.5” x
39” Kimberly-Clark DRY-UP disposable towels
•Cover garment is 100% opaque to insure privacy
•Garment and Zip-lock carry bag are constructed of Linear LowDensity Polyethylene (LLPDE)
•LLPDE is an ideal plastic for storage as it will not rot and is very
resistant to extreme temperatures
•Green color indicates that victim has been processed
through showers
•Garment slides over head for easy donning
•Openings for arms are adjustable via perforations
•Garment length may be shortened via perforations at bottom
•Each kit contains a green cover garment, two (2) single-use DRY-UP
Towels, a pair of spun bond polyethylene booties and molded
nylon comb
•Green pictographic instructions on front of kit eliminate
language barriers
•Youth size garment designed for patient height of 42” – 54” and
maximum girth of 40”
•Adult size garment designed for patient height of 54” – 66” and
maximum girth of 66”
•Large Adult size garment designed for patient height of 66” – 84” and
maximum girth of 76”
Youth Size: RDPW0210, Adult Size: RDPW0215,
Large Adult Size: RPDW0220
Dimensions (per kit): 13”W x 14.5”L x 0.5”H
Weights (per kit):
Youth Size: .47 lbs.
Adult Size: .59 lbs.
Large Adult Size: .70 lbs.
Standard Color: Red
800.328.5563
Youth Size: RDPW0225, Adult Size: RDPW0230,
Large Adult Size: RDPW0235
Dimensions: 13”W x 14.5”L x 0.75”H
Weights (per kit):
Youth Size: .50 lbs.
Adult Size: .63 lbs.
Large Adult Size: .75 lbs.
Standard Color: Green
info@ReevesEMS.com
www.ReevesEMS.com
18
Waterproof Triage Tags
RDA0036
First responders are facing challenges never before imagined. The once
unthinkable threat of radiological, biological or chemical contamination
of our civilian population is now a reality. To successfully manage these
incidents new strategies and tactics must be developed. The Waterproof
Triage Tag provides first responders with a tool to identify, process, and
triage contaminated patients. The Tag also provides rescue personnel
with a means to identify clothing and other personal property. Additionally,
because any hazardous materials release is a potential crime scene,
the tagging of evidence in the form of clothing and personal effects will
aid law enforcement in their investigation. Waterproof Triage Tags are
available in packs of 50.
Features Include:
•Fluid proof
•Evidence identification
•Primary/secondary decontamination
•Military standard bar coding for tracking & personal
property identification
•Presence of contamination
•START triage prompter
•Designed to integrate with virtually any triage tracking
software available
Weight per Pack: 1 lb.
19
DECONTAMINATION SYSTEMS AND ACCESSORIES
Large SECUR-ID Decon Property Bag – Series 2
Small SECUR-ID Decon Property Bag – Series 2
The Large SECUR-ID Decon Property Bag is a disposable, tamperevident bag designed to safely and securely store the outer garments,
shoes and personal possessions of a possibly contaminated patient for
easy tracking during the decontamination process. The patient simply
removes his/her garments and personal items, places them inside the
bag, seals the bag, removes the tear-off strip and slips it over their wrist
as their “property receipt.” Large SECUR-ID Decon Property Bag are
available in packs of 50.
The Small SECUR-ID Decon Property Bag is a disposable, tamperevident bag designed to safely and securely store the smaller valuables
and personal possessions of a possibly contaminated patient for
easy tracking during the decontamination process. The patient simply
removes his/her small valuables and personal items, places them inside
the bag, seals the bag, removes the tear-off strip and slips it over their
wrist as their “property receipt.” Small SECUR-ID Decon Property Bag
are available in packs of 50.
Features and benefits include:
•Reduces damage claims while preventing slowdowns in mass
casualty decontamination process
•Pictographic instructions on the bag to eliminate language barriers
•Unique pre-printed identification number and bar code to establish the
necessary chain of custody
•“QWIK-TRIAGE” and patient management system incorporated into
wrist receipt
•Patented SECUR-PAK sealing closure system with SECURTAPE to
foil attempts to open the bag with visible evidence and is impervious
to all temperature-controlling agents
•Constructed of strong, linear low-density co-extruded, clear polyethylene
•Large size accomodates items such as coats, clothing, large purses
and backpacks
Features and benefits include:
•Reduces damage claims while preventing slowdowns in mass
casualty decontamination process
•Pictographic instructions on the bag to eliminate language barriers
•Unique pre-printed identification number and bar code to establish the
necessary chain of custody
•“QWIK-TRIAGE” and patient management system incorporated into
wrist receipt
•Patented SECUR-PAK sealing closure system with SECURTAPE to
foil attempts to open the bag with visible evidence and is impervious
to all temperature-controlling agents
•Constructed of strong, linear low-density co-extruded, clear polyethylene
•Small size accommodates items such as watches, wallets, jewelry,
cell phones and glasses, and has a handle for easy transport
Dimensions: 22” x 24”; Thickness - 4mil
Weight: 3 oz
Dimensions: 12” x 16”; Thickness - 3mil
Weight: 1 oz
RDPW0200
800.328.5563
RDPW0205
info@ReevesEMS.com
www.ReevesEMS.com
20
SHELTER HEATING
DRASH D1000B Heater
1002814
The D-1000B Heater is rugged, lightweight, rust resistant, shock proof
and easy to operate and maintain, providing nearly 100,000 BTUs/hr of
dry, clean heat at a rate of 880 CFMs. The heater includes an electronic
control system that monitors for high heat conditions and flameout, and
operates on an external input of 120 VAC, 60 Hz, single-phase power. It
includes full safety protection devices, including a safety shut off switch
that shuts off upon detecting 100 ppms of Carbon Monoxide content. Its
pre-heated fuel filter allows the heater to work continuously in extreme
low temperatures, and it can run for 12 consecutive hours without refilling
the fuel tank.
Features:
• Compact and Mobile, Indirect fuel fired air heater
• CSA B140.0-03 & B140.8-1967 Certified, UL 733 Compliant
• Heated Air is separated and independent from combusted air
• Adjustable fresh air make-up inlet window constantly delivers fresh air
with oxygen to the tent
• Pre-heated fuel filter allows heater to work at extreme low
temperatures
• Estimated efficiency: Approximately 87 percent
• Stainless steel combustion chamber
• Rugged, two piece molded polyethylene outer body (lower and upper)
• Control Panel designed to operate in environmental extremes
• Operates up to 12 hours continuously without fuel refill
• Accurate solid-state remote thermostat control
• Remote CO (Carbon Monoxide) detector and automatic shut off
• Can operate remote control (Thermostat & CO sensor combo unit)
inside of tent, extra comfort and safety built-in features throughout
system
• 12 in x 15 ft flexible duct sections (supply and return)
- High temperature grade
• Visual fuel gauge
• Fabric duct end covers
• Heaters are stackable for maximum storage efficiency
• Designed for simple field maneuverability (wheel-able and equipped
with snow slide)
• Designed with handles for easy four man lift
• Can operate at temperatures as low as -40°F*
*Independently tested at the US Army Facility at Picatinny Arsenal, NJ.
Note: Arctic Fuel Blend required for temperatures below 32°
21
Specifications:
• Combustion: Indirect heat exchanger
• Heat Input Capacity: 110,000 BTUs/hr
• Air Flow: 880 cfm
• Fuel Consumption: 0.81 gal/hr; 3.07 l/h
• Nozzle: 0.60 - 80°S
• Pump Pressure: 170 psi
• Fuel Tank Capacity: 10.8 gal; 41 liters
• Power Supply: Single Phase, 120VAC @ 5.8 Amps, 60 Hz
• Power Consumption: 520W
• Fuse: 10A
• Flue Diameter: 5.9 in.
• Noise Level at 3 Ft: 76 dBA
• Weight (Total dry weight without accessories): 167 lbs.
• Weight (Ducts): 27 lbs. each
• Dimensions: 53.2 L x 23.8 W x 32.3 H in
• Dimensions (Ducts): 12” Diameter; 15’ Long
• Fuel Types: JP8, Diesel
Safety Protection:
• Thermostatic Safety Switch (TSS): When the heater is turned off,
the TSS assures that the fan continues to run until the surface
temperature of the combustion chamber drops, assuring a safe
restart.
• Fan Pressure Switch: When the fan stops working, this device
disables ignition and cuts fuel supply.
• Safety CO Switch: Upon detecting 100 ppm of CO, the fuel supply and
ignition are disabled.
• Flame Detector Sensor: When flame is extinguished, the fuel pump is
deactivated and heater is shut off.
• Overheat Safety Thermostat: When the heated air exceeds 250°F, the
fuel supply and ignition are disabled.
DECONTAMINATION SYSTEMS AND ACCESSORIES
Heat Pac 70,000 BTU Propane Air Heater/Blower with Supply Duct
RDHA0001
The Heat Pac Portable In-Line Propane Heater/Blower delivers 70,000 BTU’s of thermostaticallycontrolled propane heat for up to ten (10) hours with a standard 20 lb propane tank.
Features Include:
•Heat rise of 100ºF at outlet of heater
•120V AC, 50/60 HZ, 1 AMP
•Flexible 8” x 20’ duct for directional heating
•Can be configured as a blower-only setup for confined space ventilation
Dimensions: 18.5”L x 13.5”W x 15.25”H
Weight: 60 lbs. (w/duct), 50 lbs. (w/o duct)
Standard Color: Yellow
Options: Thermostat
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
22
LIGHTING
500-Watt Wobble Light
RDL0006
Bright, durable and virtually indestructible, the 36” tall Wobble Light is a
self-righting, highly durable work light that takes a severe beating from
workers, vehicles, debris and drops. String them in a series or use them
individually. No set-up is required. Just plug it in.
Additional Features Include:
•500-Watt Halogen Light – 8000 lumens equal to seven (7) 100-watt
light bulbs
•Lighting Range – 16 to 24 feet
•Polycarbonate Dome – resists impact
•Handle
•Power Inlet – 3.6 amps (110V)
•Floating Shock System – protects bulb from jarring and striking
•Internal Ventilation System – keeps the exterior cool enough to touch
•On/Off Switch
•Power Outlet – connect power equipment or additional Wobble Light
•Unique Counter-Weighted Design – repositions to upright when
knocked over
Dimensions: 18”L x 18”W x 36”H
Weight: 25 lbs.
Standard Color: Yellow
1400-Watt Tripod Light
RDL0005
The 1400-Watt Tripod Light is ideal for scene lighting during nighttime
emergency response operations.
Features Include:
•Twin 700-watt oval head design – 1400 watts total
•Two (2) 500-watt and two (2) 200-watt bulbs installed in fixture
•One (1) 500-watt and one (1) 200-watt spare bulb in handle
•Adjustable light output 200 / 400 / 500 / 700 / 900 / 1000 / 1200 / 1400
watts
•Adjusts to over seven (7) feet in height
•Two (2) protective grills
•Hardware Bag
Packed Dimensions: 12.25”L x 12.75”W x 28”H
Packed Weight: 27 lbs.
Standard Color: Orange
23
DECONTAMINATION SYSTEMS AND ACCESSORIES
50-Watt Dead-End Overhead
Light
50-Watt Stringable Overhead
Light
Hardened Carry Case for Reeves
50-Watt Lights
Meeting U.S. standards for water-resistant portable lighting, the Reeves 50-Watt Dead-End
Overhead Light is a high-impact-resistant, costefficient bright light that can go anywhere you
need to be.
Meeting U.S. standards for water-resistant
portable lighting, the Reeves 50-Watt Stringable Overhead Light is a high-impact-resistant, cost-efficient bright light that can go
anywhere you need to be.
Constructed of an injection-molded, highperformance resin, the carry case is tough,
lightweight and virtually indestructible. (Lights
and extension cord not included.)
Features Include:
•Patented floating bulb sockets protect the
bulb from impact
•Durability reinforced with twin bulb design
results in brighter light
•Electronic ballast eliminates cumbersome
fuses and unreliable starter canisters
•Extended bulb and ballast life
•Efficient and lightweight – lights weigh only
3.3 lbs. each
•Flicker free, cool-to-the-touch light with no
heat build-up
•Low Amp draw – only .35 amperes each
•Compact design – length of light is 30.5”
•Dead-end model has 42.25” cord at only one
end of light
•On/Off switch on each light allows user to
control multiple lights independently of one
another even when daisy-chained
•Integrated plastic hooks allow lights to be
hung with ease
Features Include:
•Patented floating bulb sockets protect the
bulb from impact
•Durability reinforced with twin bulb design
results in brighter light
•Electronic ballast eliminates cumbersome
fuses and unreliable starter canisters
•Extended bulb and ballast life
•Efficient and lightweight – lights weigh only
3.4 lbs. each
•Flicker free, cool-to-the-touch light with no
heat build-up
•Low Amp draw – only .35 amperes each
•Compact design – length of light is 30.5”
•Stringable model has 42.25” cord at each
end to allow for daisy-chaining
•On/Off switch on each light allows user to
control multiple lights independently of one
another even when daisy-chained
•Integrated plastic hooks allow lights to be
hung with ease
Weight: 3.3 lbs.
Options: Transport Bag, Hardened
Carry Case, Relamping Kit
Weight: 3.4 lbs.
Options: Transport Bag, Hardened
Carry Case, Relamping Kit
Sets:
One (1) Dead-End Light, One (1) Stringable
Overhead Light w/ Transport Bag
Sets:
Two (2) Stringable Overhead Lights
w/ Transport Bag
RDL0001
1003672
RDL0002
RDL0004
Features Include:
• Meets Federal Standards for drop testing,
impact resistance, vibration and water
immersion
• Equipped with fold-down handles and wheels
for easy portability
• Double Throw latches open easily
• O-ring seal and Automatic Pressure
Equalization Valve
• Shock-absorbing closed-cell foam interior
• Foam cut-outs allow for safe storage of
up to four (4) Reeves 50-Watt Lights with
extension cord
Exterior Dimensions: 53”L x 16”W x 6.12”H
Weight (empty): 20 lbs.
Standard Color: Black
Sets:
Four (4) Stringable Overhead Lights
w/ Hardened Carry Case
1003666
1003665
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
24
PATIENT AND REMAINS MOVEMENT
Folding Mesh Decon Litter shown
Mesh Decon Litters
RDS0120 (Folding), 1008098 (Rigid)
Reeves Folding and Mesh Decon Litters are ideal for patient transport
during the decontamination process. The mesh design of their durable 18
oz. vinyl-coated nylon covers allow contaminated run-off to pass through,
thus preventing a pooling effect from occurring under the patient and
minimizing exposure to harmful gray water. Easily set up, these Medical
Corps type litters are light in weight and have shaped hardwood handles
for a more comfortable transport. Rigid Litter can also be clamped to the
top of a Reeves Wheeled Litter Carrier for easy patient transport.
Dimensions:
Open: 87”L x 22”W x 4.5”H
Closed: 43.5”L x 3.5”W x 7.5”H (Folding), 87”L x 3.5”W x 4.5”H (Rigid)
Weight: 12 lbs.
Standard Color: Green
Options: Patient Restrainer Straps, Replacement Cover
Poly Litter Stand
RDA0061
The Poly Litter Stand is designed for use as a set to provide a stable,
elevated platform on which medical personnel can place a patient to
more safely and easily administer emergency treatment in the field.
Features Include:
•Rugged, rustproof highimpact polypropylene
•Lightweight and easy to
transport
•Folds to only 2” wide
•Easy to store
•Weighs only 9 lbs
25
Dimensions: 21.6”W x 17.7”D x 30”H
Weight: 9 lbs.
Standard Color: Black and Red
Wheeled Litter Carrier
RDS0003*
The Wheeled Litter Carrier is designed for use by fire and safety workers,
medical emergency personnel, and by military medical units who need to
have the fastest and most reliable patient transportation possible while
minimizing the amount of manpower needed. The unique Carrier frame
is made of a heavy-duty but lightweight aluminum and can be easily
adapted for different terrains by a quick change of only the axle and the
two (2) wheels.
Features Include:
• Will accommodate pole stretchers or litters with a width of 19” to 22”**
• Weight capacity of 350 lbs
• Folds down to compact footprint for easy transport and storage
• Wide wheel base makes the Carrier very stable while transporting a
patient
• Foot prop folds up and out of the way for transporting the patient
• Anti-tip bar behind the wheels makes the Carrier very stable when
unattended
• Snap-down clamps allow a litter to be quickly attached to and
detached from Carrier
• Carrier with litter can be used to carry medical supplies and equipment
• Standard narrow pneumatic wheels designed for conventional use
• Optional narrow non-puncture wheels designed to provide optimum
blend of strength and memory
Dimensions:
Folded, no axle or wheels: 8"H x 39"L x 24"W;
Open with axle & narrow wheels: 28"H x 35"L x 28"W;
Weight: 45 lbs.
Wheel: Standard narrow pneumatic wheels (20"H x 2"W)
Options: Non-Puncture Wheels, Height Extenders*, Height Adjustment
Platform, IV Rod, Wheel Locks and Rigid Mesh Decon Litter
* A military-version of the Wheeled Litter Carrier with 4” height extenders (part number 1009691) is
also available.
**Folding litters or pole stretchers must have a locking mechanism at each hinge to be used with the
Carrier.
DECONTAMINATION SYSTEMS AND ACCESSORIES
Mortuary Remains Tray with Drain
Remains Transfer Sheet
Remains Tray Cover
The Reeves Mortuary Decon Remains Tray
is made of a decontaminable High Density
Polyethylene (HDPE). The tray has four (4)
notches – two (2) at each end – that allow a
mesh pole litter with remains placed on top to sit
securely over the tray, ensuring that “dirty” runoff is properly contained during the mortuary
decontamination process. Each tray includes
a ¾” threaded male drain port with cap. An
optional ball valve and discharge hose set-up
allows the tray to be drained without fear of
contamination leakage.
The Remains Transfer Sheet provides the
perfect lightweight and compact alternative
to assist emergency response personnel
with remains transfer during the mortuary
decontamination process. Used for the
rapid transfer of contaminated remains, it is
constructed of a durable vinyl-coated mesh
with reinforced webbing and is specifically
made to fit inside of the Reeves Mortuary
Remains Tray. Its mesh design allows
contaminated run-off from remains to filter
through and into the tray underneath in order
to minimize the exposure of contaminants to
the surrounding environment during transfer
of the remains to a post mortem bag. Six (6)
carry handles allow multiple personnel to
help transfer remains.
The limited-use Reeves Remains Tray Cover
fits snugly on the Reeves Mortuary Decon
Remains Tray. The cover is constructed of a
dark blue, 6 oz. lightweight vinyl that is waterresistant, mildew-resistant and anti-fungal.
Remains can be placed on the Reeves Remains
Transfer Sheet and placed into the Tray for
decontamination. The tight-fitting Remains Tray
Cover is then placed over the Tray to conceal
its contents.
RDA0047
Dimensions: 80”L x 30”W x 10”H
Weight: 40 lbs.
Standard Color: Gray
Options: Remains Tray Cover; Remains
Transfer Sheet, Ball Valve and Discharge Hose
RSS0015
RSC0001
Weight: 1 lb.
Standard Color: Dark Blue
Dimensions: Folds to 9”L x 9”W x 5”H
Weight: 1 lb.
Standard Color: Black
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
26
800.328.5563
info@ReevesEMS.com
www.ReevesEMS.com
R608DEC-003.1
READY FOR ANYTHING
Download PDF