330, 220 SERIES
C2-m/C2-m-CB model
(To be filled out by the hearing care professional)
…… CLEAR440
…… CLEAR330
…… CLEAR220
……Audibility Extender
……Reverse focus
……Master + Zen
……Master + Audibility Extender
……Master + Reverse focus
……Master + Phone
Your hearing care professional
THE HEARING AID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Acoustic indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
The battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Inserting the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Battery drawer without a nail grip . . . . . . . . . . . . . . . . . . 11
Low battery indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the hearing aid on and off . . . . . . . . . . . . . . . . . . . 13
Right/left identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Positioning the hearing aid . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Removing the hearing aid . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Lost partner alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Switching between the listening programs . . . . . . . . . . 22
Zen+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using a telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
The hearing aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
The microphone openings . . . . . . . . . . . . . . . . . . . . . . . . . 25
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
IN CASE OF MALFUNCTION . . . . . . . . . . . . . . . . . . . . . . . . 27
CARING FOR YOUR HEARING AID . . . . . . . . . . . . . . . . . . 29
WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ADVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Adapting to your hearing aids . . . . . . . . . . . . . . . . . . . . . . . 36
REGULATORY INFORMATION . . . . . . . . . . . . . . . . . . . . . . 38
ADDITIONAL PROGRAM FORMS . . . . . . . . . . . . . . . . . . . . 43
SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
The illustration below shows the hearing aid without an
ear-set. The choice of ear-set solution depends on your
specific needs. Please refer to the separate ear-set user
1. Microphone openings
2. On/off function
3. Nail grip
4. LED & Right/Left identification
If you need help to identify the serial number (usually six or seven
digits) on the product, please contact your hearing care professional.
In addition to these user instructions, a separate user manual is
provided describing the various ear-set solutions available for
your hearing aid: “Ear-sets for Widex BTE hearing aids”.
This booklet and the manual “Ear-sets for Widex BTE hearing
aids” contain important information and instructions. Read
these booklets carefully before you start using the hearing aid.
Your hearing aid, ear-set and accessories may not look exactly
as illustrated in this booklet. We also reserve the right to make
any changes considered necessary.
Intended use
The hearing aids are intended as air conduction amplification devices to be used in everyday listening environments. The hearing aids may be provided with the Zen
program intended to provide a relaxing sound background (i.e. music/noise source) for adults who desire
to listen to such a background in quiet.
Indications for use
The devices are indicated for individuals with a range of
hearing loss severity from minimal (10 dB HL)to moderately severe (85 dB HL) and all hearing loss configurations.
They are to be programmed by licensed hearing care
professionals (audiologists, hearing aid specialists, otolaryngologists) who are trained in hearing (re) habilitation.
Description of device
Your hearing aid is used with an ear-set which consists
of a tube and an ear-tip or earmould. The hearing aid
uses a proprietary wireless technology, WidexLink, to
enable communication between the left and the right
hearing aid, as well as between the hearing aids and the
DEX accessories.
Your hearing aid may be provided with a listening program called Zen. It makes musical tones (and sometimes a rushing noise) in the background. These sounds
are shaped according to your hearing loss.
Acoustic indicators
The hearing aid may be set to produce a signal to indicate the use of certain functions. The signal may be a
spoken message or tones. The signal can also be deactivated.
Adjusting volume via remote control
Confirming RC program key use
Changing program via remote control
Message Tones/off
Starting up the hearing aid
Message Tone/off
Warning about low battery
Message 4 tones/off
Warning about lost partner
Service reminder
Note: “ Warning about lost partner” can only be made available
in CLEAR440 and CLEAR330.
The battery
We recommend zinc-air batteries. Use a size 10 battery
for the hearing aid.
To obtain replacement batteries, please consult your
hearing care professional. It is important to take note of
the expiry date and the recommendations on the battery pack regarding disposal of used batteries.
Inserting the battery
Before inserting a new battery into the
hearing aid, remember to remove the adhesive tab. Once the tab has been removed,
the battery will start functioning after a few
Do not use batteries if there is a sticky residue from the tab or
other unwanted substance, as this can cause the hearing aid to
Use the nail grip to gently swing the battery drawer
open. Do not press the drawer beyond the open position.
Place the battery in the drawer as illustrated, so that the
plus (+) sign on the battery is facing towards you when
you hold the hearing aid as shown. You can use the battery magnet provided to steer the battery into place.
If the battery drawer does not close easily, the battery
is incorrectly inserted.
When changing battery, it is a good idea to hold the
hearing aid over a table.
Removing the battery
1. Open the battery drawer as previously described.
Place the hearing aid on the provided cloth on a
clean, plane surface and turn it as illustrated.
2. Supporting the drawer with your finger, use the
battery magnet provided to push the battery out of
the battery drawer from the minus side.
Battery drawer without a nail grip
The hearing aid may be provided with
a battery drawer without a nail grip,
which means that you need a tool to
open the battery drawer. This type of
drawer can be a good choice if the
hearing aid is worn by a child. A special tool for opening the drawer will be
included with this drawer.
The battery drawer is opened as illustrated.
Low battery indication
An acoustic indicator will sound when the battery is
nearly exhausted, unless this function has been disabled (see page “Acoustic indicators” on page 7).
We recommend that you always have a spare battery
with you.
Never leave an exhausted battery in the hearing aid. Exhausted
batteries may leak, damaging the hearing aid.
Your hearing aid may stop functioning, for instance if the
­battery is exhausted. You should be aware of this possibility, in
particular when you are in traffic or are otherwise dependent
on warning signals.
Turning the hearing aid on and off
The battery drawer of the hearing aid also functions as
the on/off switch.
Close the battery drawer to turn on the
hearing aid. An acoustic indicator will
indicate that the hearing aid has been
switched on unless this function has
been disabled.
Open the battery drawer completely to turn off the hearing aid.
Note: Another way to verify that the
hearing aid is turned on is to cup it
in your hand. If it is on, it will whistle.
Please remember to turn off the hearing aid when it is
not in use. Remove the battery if the hearing aid will not
be used for several days.
Right/left identification
If you wear hearing aids on both ears,
the hearing aids can be provided with
coloured marks (red mark = right and
blue mark = left).
The arrow shows the position of the
identification mark.
Positioning the hearing aid
Insert the earpiece in the ear canal while holding the
lower part of the tube. It may help to pull the outer ear
backwards and upwards with the opposite hand.
Place the hearing aid behind the ear, so that the hearing aid and tube rest comfortably on the ear, close to
your head.
The illustrations show an open ear-tip. For further information on ear-tip/earmould types, anchors and procedures, see the separate ear-set user manual provided.
If the ear-set does not fit or sit properly, causing discomfort, irritation, redness or the like, contact your
hearing care professional.
Removing the hearing aid
Remove the hearing aid from its position behind the
Carefully pull the earpiece out of the ear canal, while
holding the lower part of the tube. If the earpiece is
provided with an extraction cord, take hold of this and
carefully pull the ear-tip out of the ear canal.
Volume adjustment
The hearing aid volume is adjusted automatically in
accordance with your sound environment.
If you have a remote control, you can also adjust the
volume manually or mute your hearing aid. Any adjustment of the volume setting will be cancelled when your
hearing aid is turned off, or when you change program.
In the default setting, any volume adjustment via the
remote control will affect both hearing aids.
To alter the increments in which the volume is increased
or decreased, consult your hearing care professional.
If you have a remote control, please also refer to the
user instructions for this.
If the volume in the hearing aid is generally too loud or too
weak, or the reproduced sounds are distorted, or if you would
like any further information, consult your hearing care professional.
To mute the hearing aid with a remote control:
Keep pressing the volume down key on the remote control until the long beep-tone has sounded. Pressing one
of the volume keys briefly will bring back the sound.
Lost partner alarm
(Note: Only applicable if this feature is available and
has been activated by your hearing care professional.)
If one of your hearing aids falls off your ear, and/or the
battery is exhausted, a tone signal and a spoken message will sound two times in the other hearing aid, and
a diode will flash on both hearing aids.
When the lost hearing aid is repositioned, and/or the
battery is exchanged, the diodes stop flashing.
By default your hearing aid has one program. However,
with a remote control a number of additional programs,
plus the special Zen program called Zen+ can be made
Please also refer to the user instructions for your remote
For listening to music
For listening to the TV
Attenuates background noise
Makes high-frequency sounds audible
Reverse focus
Focus on sounds from behind
For listening to the telephone
Generates different kinds of tones or noise
The Master program in one ear and Zen,
Reverse focus, Audibility Extender or
Phone in the other
Special Zen program with up to three
different Zen styles
If your needs change over time, the combination of listening programs can be altered.
Zen program
Your hearing aid may be provided with a unique optional
listening program called Zen. It makes musical tones
(and sometimes a rushing noise) in the background.
The Zen program may be used alone (without amplification) in quiet when you are not required to hear surrounding sounds. Or, it may be used with amplification
so that both the surrounding sounds and the generated
sounds (fractal tones and noise) are heard together.
Use of the different Zen programs may interfere with hearing
surrounding sounds including speech. The programs should not
be used when hearing such sounds is important. Switch the
hearing aid to a non-Zen program in those situations.
If you perceive a decrease in loudness, tolerance of sounds,
speech not as clear, or worsening tinnitus, contact your hearing
care professional.
The Zen program may provide a relaxing listening
background for some people. When the Zen program
is used in a tinnitus management program, its wearer
may experience some relief from tinnitus.
Indications for use
The Zen program is intended to provide a relaxing
sound background (i.e., music/noise source) for adults
who desire to listen to such a background in quiet. It
may be used as a sound therapy tool in a tinnitus treatment program that is prescribed by a hearing care professional (audiologists, hearing aid specialists, otolaryngologists) who is trained in tinnitus management.
Directions for use
Because of the unique ways in which Zen is programmed in your hearing aid, please follow the recommendations of your hearing care professionals as to
how to use the program, when to use the program and/
or how long to use the program.
Switching between the listening programs
If you have a remote control, you can change programs
with a simple push of the program key. Each time you
change program, an acoustic indicator will sound unless
this function has been disabled.
Program 1:Message or one short beep
Program 2:Message or two short beeps
Program 3:Message or three short beeps
Program 4:Message or one long and one short beep
Program 5:Message or one long and two short beeps
Zen+:Message or tone
In the default setting, both your hearing aids will be affected when you change programs.
This program is accessed via a long press (more than
1 second) on the remote control program key. A short
press then a
­ llows you to cycle through the available
Zen styles.
You can exit Zen+ by pressing and holding the program
key for more than 1 second.
Using a telephone
When using a telephone, we recommend that you hold the telephone against your head at
an angle above your ear, rather
than directly against the ear.
If the sound is not optimal, try
moving the telephone earpiece
to a slightly different position.
The following cleaning accessories are available for the
hearing aid and ear-set*. For cleaning the ear-set, see
the user manual “Ear-sets for Widex BTE hearing aids”.
2.Wax removing tool
3.Cleaning thread
Contact your hearing care professional if you need
additional supplies of cleaning accessories.
* Selection depends on ear-set type
The hearing aid
Clean the hearing aid with the soft
cloth after use.
If the microphone openings are
still blocked, contact your hearing
care professional.
Never use water or cleaning solutions to clean the hearing aid,
as this may cause it to malfunction.
The microphone openings
Clean the microphone openings
by passing the wax removing tool
straight through the openings.
If you feel resistance, withdraw the
tool and try again. Use only the
wax removing tool provided.
When the hearing aid is not in use,
keep it in a warm, dry place with
the battery drawer open, to ventilate the hearing aid and allow it
to dry.
A variety of assistive listening devices are available for
your hearing aid.
remote control
for listening to TV and audio
f or mobile phone applications and remote
PHONE-DEX for easy landline use*
the FM+DEX is a high-quality streaming device
designed specifically for Widex hearing aids
* Available in some countries only
For help in determining whether you could benefit from
a remote control or other accessories, please consult
your hearing care professional.
Possible cause
The hearing
aid is completely silent
The hearing aid is
not turned on
Make sure the battery
drawer is closed
The hearing
aid volume is
not powerful
Your ear is blocked
by earwax
Contact your ENT
Your hearing may
have changed
Contact your hearing
care professional
The hearing
aid whistles
Your ear is blocked
by earwax
Contact your ENT
Your two
hearing aids
are not
­working in
The connection
Turn the hearing aids
between the hearing off and on again
aids is lost
The hearing
aids do not
respond with
a correspond­
ing change in
volume or
program to
the DEX
The DEX is used
beyond the trans­
mission range
Move the DEX closer to
the hearing aids
Strong electromagnetic interference in
the vicinity
Move away from known
source of EM interference
The DEX and the
hearing aids are not
Check with hearing care
professional to make
sure DEX is matched
with the hearing aids
The battery does not Insert a new battery in
the battery drawer
Possible cause
You hear
speech (on
and off) from
the hearing
aids or no
(muted) from
the transmitting ear.
The battery in one of Replace battery in one
the hearing aids has or both hearing aids
Strong electromagnetic interference in
the vicinity
Move away from known
sources of interference
Note: This information covers only the hearing aid. See
the “Ear-sets for Widex BTE hearing aids” user manual
for information specific to your ear-set.
If the problems persist, contact your hearing care professional for assistance.
The hearing aid is a valuable object and should be
treated with care. Here are some things you can do to
prolong the life of your hearing aid:
•Turn off your hearing aid when it is not in use. Remove the
battery if the hearing aid will not be used for several days.
•When the hearing aid is not in use, keep it in its case in a dry
location out of reach of children and pets.
•Do not expose the hearing aid to extreme temperatures or
high humidity. Make sure to dry the hearing aid thoroughly
after heavy perspiration such as that which may occur during
intense physical activity, e.g. playing sports.
•Avoid dropping your hearing aid – perform cleaning and battery changes while holding the hearing aid above a soft surface.
•Do not wear your hearing aid while in the shower or swimming, or when using a hair dryer, perfume, hair and body
sprays or gels such as suntanning lotions or creams.
Hearing aids and batteries can be dangerous if swal­lowed or
used improperly. Swallowing or ­improper use can result in
­severe injury or even f­ atalities. In case of ingestion, contact a
physician immediately.
•Keep hearing aids and their parts, accessories and batteries out of reach of children and anyone else who might swallow such items or otherwise cause injury to themselves. Do
not change batteries in front of them and do not let them see
where you keep your battery supply. Discard used batteries
•Batteries are very small and can easily be mistaken for pills or
the like. Never put a battery or hearing aid in your mouth for
any reason as you may risk swallowing it.
•Clean and inspect your hearing aid after use to check that it is
intact. If the hearing aid or the ear-set breaks while in the ear
canal, contact your hearing care professional immediately. Do
not try to remove the parts yourself.
•Risk of explosion if battery is replaced by an incorrect type or
recharged. Dispose of used batteries according to the instructions.
•Never allow others to wear your hearing aid, as this could
cause permanent damage to their hear­ing.
•When selecting a listening program, please remember that
there are situations in which it is particularly important to be
able to hear the surrounding sounds (e.g. traffic, warning signals).
•The hearing aid is made of modern non-allergenic materials. Nonetheless, in rare cases skin irritation may occur. If you
notice skin irritation in or around your ear or ear canal, contact
your hearing care professional.
•Please note that when using any type of hearing aid, you must
allow regular ventilation of the ear. If the ear is not adequately
ventilated, there may be a slightly increased risk of infection
or disease in the ear canal. We therefore recommend that you
remove the hearing aid and ear-set from your ear when you
go to bed, to allow the ear canal to be ventilated. If possible,
you should also remove your hearing aid and ear-set during
the day if there are any periods when you do not need them.
Make sure that you clean and inspect your hearing aid and
ear-set as required. If an ear infection or disease occurs, you
should seek medical attention and contact your hearing care
professional for advice on how to disinfect the various hearing
aid parts. Do not under any circumstances use alcohol, chlorine or similar substances for this purpose.
•Regular use of a de-humidifier is recommended to help avoid
malfunction of the hearing aid.
•Do not use Widex hearing aids in mines or other areas with
explosive gases.
•Do not wear your hearing aid during radiation, X-rays, MRIs,
CT or other medical treatments and scans. The emissions
from these procedures as well as from other types of radiation, such as that in a microwave oven, can damage your hearing aid and the hearing aid can become very hot. R
­ adiation
from, for example, room surveillance equipment, burglar
alarms and mobile phones is weaker and will not damage the
hearing aid, but may create audible interference.
Interference with active Implants
•In order to show caution, we advise to follow the guidelines
recommended by manufacturers of defibrillators and pacemakers regarding use of mobile phones:
•If you wear an active implantable device keep the Wireless
Hearing Aids and Hearing Aid Accessories such as wireless
remote controls or communicators at least 15 cm away from
the implant.
•If you experience any interference, do not use the hearing aids
and contact the manufacturer of the implant. Please note that
interference can also be caused by power lines, electrostatic
discharge, airport metal detectors etc.
•If you have an active brain implant, please contact the manufacturer of the implant for risk evaluation.
If you have an implantable device, we advise to keep magnets*
at least 15 cm away from the implant. (*= can be specified as
Autophone magnet, hearing instrument case, magnet in a tool,
•Your hearing aid has been tested for interference according
to international standards. Nevertheless, it is possible that
unforeseen interference may occur in the hearing aid due to
electromagnetic radiation from other products such as alarm
systems, room surveillance equipment and mobile phones.
•Although your hearing aid has been designed to comply with
the most stringent international electromagnetic compatibility standards, the possibility cannot be excluded that it may
cause interference with other equipment, such as medical
•Never try to open or repair the hearing aid yourself.
•The hearing aid will not restore normal hearing and will not
prevent or improve a hearing loss resulting from organic
conditions. However, the hearing aid can help you to make
the best possible use of your remaining hearing ability. You
should also bear in mind that it can take time to get used to a
new hearing aid and new sounds.
•In most cases, using the hearing aid infrequently will not permit you to gain full benefit from it.
•The use of a hearing aid is only part of hearing habilitation
and may need to be supplemented by auditory training and
instruction in lipreading.
•The use of hearing aids increases the risk of accumulation of
earwax. Contact your physician/ENT doctor if you suspect
that a plug of earwax has accumulated in your ear. Earwax
may not only reduce your own hearing but also the effect of
the hearing aid considerably. It is a good idea to ask your physician to clean your ears a couple of times a year.
Adapting to your hearing aids
Congratulations for taking the first steps toward restoring your communication skills with the purchase of
state-of-the-art hearing aids from Widex.
Because many of the sounds you may now hear have
not been fully audible without hearing aids, we urge
you to take a few minutes to perform the following simple activities in the order listed. Do these first in quiet
settings, then try them in noisier surroundings.
Activity 1: First, listen to a friend or relative speak to
you with your eyes closed and your hearing aids off.
Now, put your hearing aids on and continue to listen.
Notice the difference? The purpose of this activity is not
to hear every word, but just to recognize the difference
in amplified speech from a familiar source.
Activity 2: Listen to your friend or relative speak to you
with your hearing aids on, but with your eyes closed.
Now continue to listen with your eyes open. The goal is
to demonstrate how helpful it is to receive information
from your eyes to supplement your ears.
Activity 3: Purchase two copies of today’s newspaper.
Ask a friend or relative to read a story aloud while you
read along with the same story. Alternatively, read it
aloud and listen to your own voice. It is also helpful to
watch captioned TV.
• We hear in our brain, not in our ears. It will take your
brain some time to fully adapt to the new sounds
you are hearing. It is not unusual, for example, to
hear certain sounds, such as your own footsteps, or
a newspaper rustling, or the refrigerator humming,
that people with normal hearing take for granted and
thus don’t consciously process. Be patient and allow
yourself a few weeks to adapt. Your brain will learn
to ignore them if they are not important. Of course,
if sounds are too loud or uncomfortable for you, contact your hearing care professional.
• Conversational speech has many redundant cues.
Worrying about a word you may have missed will
likely lead to additional missed words. Focus on the
essence of the conversation. It may help to ask someone you are comfortable with to subtly alert you
about the overall topic when listening in groups.
• Before going to a restaurant, call ahead and request
a seat away from the kitchen or bar area. Remember
that in noisy places, even normal hearing people may
struggle to hear.
For more activities, training materials, and helpful communication hints please go to
IC: 5676B-C4M
IC: 5676B-C4MCB
Federal Communications Commission Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
Changes or modifications to the equipment not expressly
approved by Widex could void the user’s authority to operate
the equipment.
Industry Canada Statement /
Déclaration d’industrie Canada
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Conformément à la réglementation d’Industrie Canada, le
présent émetteur radio peut fonctionner avec une antenne d’un
type et d’un gain maximal (ou inférieur) approuvé pour
l’émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à
l’intention des autres utilisateurs, il faut choisir le type d’antenne
et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à
l’établissement d’une communication satisfaisante.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Hereby, Widex A/S declares that the C4-m, C4-m-CB,
C3-m, C3-m-CB, C2-m and C2-m-CB are in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity can be found
lectrical and electronic equipment (EEE)
contains materials, components and substances that can be hazardous and present
a risk to human health and the environment
when waste electrical and electronic equipment (WEEE) is not handled correctly.
Do not dispose of hearing aids, hearing aid accessories
and batteries with ordinary household waste.
Hearing aids, batteries and hearing aid accessories
should be disposed of at sites intended for waste electrical and electronic equipment, or given to your hearing care professional for safe disposal. Proper disposal
helps to protect human health and the environment.
Programs available in your hearing aid:
Program 1:
Program 2:
Program 3:
Program 4:
Program 5:
Special program:
Programs available in your hearing aid:
Program 1:
Program 2:
Program 3:
Program 4:
Program 5:
Special program:
Symbols commonly used by Widex A/S in medical device
labelling (labels/IFU/etc .)
Symbol Title/Description
The product is produced by the manufacturer whose
name and address are stated next to the symbol . If appropriate, the date of manufacture may also be stated .
Date of manufacture
The date when the product was manufactured .
Use-by date
The date after which the product is not to be used .
Batch code
The product’s batch code (lot or batch identification) .
Catalogue number
The product’s catalogue (item) number .
Serial number
The product’s serial number .*
Keep away from sunlight
The product must be protected from light sources and/or
The product must be kept away from heat
Symbol Title/Description
Keep dry
The product must be protected from moisture and/or
The product must be kept away from rain
Lower limit of temperature
The lowest temperature to which the product can be
safely exposed .
Upper limit of temperature
The highest temperature to which the product can be
safely exposed .
Temperature limits
The highest and lowest temperatures to which the product can be safely exposed .
Consult instructions for use
The user instructions contain important cautionary information (warnings/precautions) and must be read before
using the product .
Text marked with a caution/warning symbol must be
read before using the product .
WEEE mark
“Not for general waste”
When the product is to be discarded, it must be sent to
a designated collection point for recycling and recovery .
Symbol Title/Description
CE mark
The product is in conformity with the requirements set
out in European CE marking directives .
The product is identified by R&TTE Directive 1999/5/EC
as an equipment Class 2 product with some restrictions
on use in some CE member states .
C-Tick mark
The product complies with EMC and radio spectrum
regulatory requirements for products supplied to the
Australian or New Zealand market .
Electromagnetic interference may occur in the vicinity of
the product .
*The six- or seven-digit number on the product is the serial number . Serial numbers may not always be preceded by
WIDEX A/S Nymoellevej 6, DK-3540 Lynge, Denmark
Manual no.:
9 514 0266 001 #02
WIDEX, WIDEX CLEAR and DEX are trademarks of Widex A/S