advertisement
ColorEdge CE210W
No. SS-6616C
SPECIFICATIONS
53 cm (21.1 inch) class Calibration Color LCD Monitor
Viewable Image Size 53.4 cm (21.0 inches)
CONTENTS
1
ABOUT THE SPECIFICATIONS .......................................................................... 2
2
PRECAUTIONS.................................................................................................... 3
3
USER CONTROL SPECIFICATIONS .................................................................. 5
4
LCD SPECIFICATIONS........................................................................................ 8
5
ELECTRICAL SPECIFICATIONS....................................................................... 12
6
MECHANICAL SPECIFICATIONS ..................................................................... 14
7
ACCESSORIES.................................................................................................. 18
8
CERTIFICATIONS & STANDARDS ................................................................... 20
9
RELIABILITY & OPERATING ENVIRONMENT ................................................. 22
10
REVISION TRACE ............................................................................................. 23
Page 1/23
ColorEdge CE210W
No. SS-6616C
1 ABOUT THE SPECIFICATIONS
The specifications apply only to the following monitor for use in North American,
European and Asian countries.
EIZO ColorEdge CE210W
Country White
Europe
Black
CE210WEDWS CE210WEDBK
Switzerland CE210WESWS CE210WESBK
U.K. CE210WUKWS CE210WUKBK
China CE210WCNWS CE210WCNBK
Taiwan CE210WTRWS CE210WTRBK
U.S.A
Canada
CE210WUSWS CE210WUSBK
The specifications contain copyrighted or original know-how. No part of these specifications may be reproduced or disclosed to the third party without the permission of
Eizo Nanao Corporation.
If a situation not specified in these specifications or a question about them arises, negotiations should be made between the customer and Eizo Nanao Corporation on the modification of specifications.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
VGA is a registered trademark of International Business Machines Corporation.
Windows is registered trademarks of Microsoft Corporation.
PowerManager is trademarks of EIZO NANAO CORPORATION.
ColorEdge, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION.
All brand names and product names are trademarks or registered trademarks of their respective companies.
Page 2/23
ColorEdge CE210W
No. SS-6616C
2 PRECAUTIONS
2.1 Applications
This product is intended to be used with data processing devices for the personal computer or OA devices.
This product is not developed for applications which would require higher reliability, and safety such as those listed below.
• Transportation systems (Ship, aircraft, train, automobile, etc.)
• Safety devices (Disaster prevention system, security control system, etc.)
• Aviation & Spacecraft devices
• Equipment for the use that have direct effect on human life (Life support system,
Medical equipment or devices used in the operating room, etc.)
• Nuclear energy control devices (Nuclear energy control system, security control system of nuclear facility, etc.)
• Main line devices (Operation control for the transportation, control systems specific to the aircraft, etc.)
Please contact Eizo Nanao Corporation for consultation, if you plan to use a product in the manners listed above or for any other deviation of use from the standard application.
2.2 Precautions for the product specifications
The product is designed for in-door use only. Please read the User’s manual included into the product package carefully before use.
This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region, to which it was originally shipped, the product may not perform as stated in the specifications.
The product specifications are also guaranteed with the EIZO standard power cord and signal cable provided with the product and/or EIZO optional cables.
Please find listed below phenomena caused by the characteristics inherent to the
LCD itself that are not defects of the product.
(1) Defective pixels, bright point
The screen may have some defective pixels as slightly light or dark areas on the screen.
(2) After image, retained image
When the screen image has been changed after displaying the same image for a period, after images (retained image) may appear.
(3) Backlight life
The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, the backlight needs to exchange.
(4) Characteristics for the LCD panel
Take care when handling the LCD panel. Do not scratch or press on the panel with any sharp objects, such as pencil or pen. Cleaning the panel with a dirty or rough cloth also may damage the panel. Do not press on the panel or edge of the frame strongly as this will result in damage to the screen.
(5) Warm-up period
It takes approx. 30 minutes until the monitor and component stabilizes. Allow the monitor to warm up for at least 30 minutes before making adjustment.
Page 3/23
ColorEdge CE210W
No. SS-6616C
When transferring the monitor from a cold environment to a warm environment, dew condensation might occur. When this occurs, please wait until the dew condensation disappears from the monitor before turning on the power. Turnings the power on too soon with dew condensing will damage the monitor.
Periodic cleaning of the screen is recommended to maintain image clarity.
2.3 Exclusion of liability
EIZO and EIZO authorized distributors shall have no obligation under this warranty whatsoever in respect of any of such defects, or in any of such cases, as set forth below:
(1) Any defect of the product caused by freight damage, modification, alteration, abuse, misuse, accident, incorrect installation, disaster, faulty maintenance and/or improper repair by third party other than EIZO and EIZO authorized distributors.
(2) Any incompatibility of the product due to possible technical innovations and/or regulations.
(3) Any deterioration of display performance due to expendable parts such as LCD panel and/or backlight, etc… (e.g. changes in brightness, color, brightness uniformity, color uniformity, color uniformity, defective pixels and/or burnt pixels, etc…)
(4) Any defect of the product caused by external equipment.
(5) Any defect of the product on which the original serial number has been altered or removed.
(6) Any normal deterioration of the product, particularly that of consumables, accessories, and/or attachments (e.g. buttons, rotating parts, cables, user’s manual, etc…).
(7) Any deformation, discoloration, and/or warp of the exterior of the product including that of the surface of the LCD panel.
The product is warranted by “LIMITED WARRANTY” included with the product.
Product Number
CE210WEDWS/ CE210WEDBK
Monitor
5 years *1
LCD Panel
CE210WESWS/ CE210WESBK - -
5 years *1
CE210WUKWS/ CE210WUKBK
CE210WTRWS/ CE210WTRBK 5 years *1
5 years *1
CE210WCNWS/ CE210WCNBK
CE210WUSWS/ CE210WUSBK 5 years *1 3
*1 The product shall be free from defects in material and workmanship for a period of five (5) years, but subject to the usage time being 30,000 hours or less from the date of purchase.
Panel qualification (Bright dots, Black dots) is guaranteed 6-month after production.
EIZO NANAO COPORATION will stock parts of this monitor at least seven years after the stop of production. In repairing the monitor, we will use renewal parts which comply with our QC standards for preserving the environment.
Page 4/23
ColorEdge CE210W
No. SS-6616C
3 USER CONTROL SPECIFICATIONS
3.1 Function & Control
A1: Front
(2)
Control Panel
SIGNAL AUTO ENTER
(1)
(1) ScreenManager (OSD menu)
(2) FineContrast menu
(3) Input signal selection button
(4) Auto adjustment button
(5) Enter button
(6) Control buttons (Up, Down, Left, Right key)
* Right and Left buttons can be used as the fine contrast mode switching buttons.
(7) Power button
(8) Power indicator (LED)
(3) (4) (5)
A2: Rear / side
(9)
(11)
(10)
(6)
(7) (8)
(9) Stand (Height adjustable)
(10) Slot for security lock
(11) Cable holder
(15)
(12) Power connector
(13) DVI-I 29 pin input connector x2
(14) USB Downstream (Series A) port x1
(15) USB Upstream (Series B) port x 2
(12)
(13)
(14)
• Status of Power Indicator (LED)
Monitor LED
Power button Off No light
On Blue
Signal check Blue
Power saving mode Orange
Advanced notice for Off timer Blue blinking
Page 5/23
ColorEdge CE210W
No. SS-6616C
3.2 ScreenManager (OSD) menu
Pushing the Enter button, ScreenManager menu appears. The followings are adjustment items adjusted by using the control buttons. Performing the reset function, all settings return to below. (both analog input and digital input)
Main Menu
Screen
Color
Adjustment/Setting(Sub menu)
Clock
Phase
Position
Resolution
Range Adjustment
Smoothing
Signal Filter
Brightness
Temperature
Gamma
Saturation
Hue
Gain
6 Color
Reset
PowerManager Set
Others Screen Size
DVI DMPM
VESA DPMS
Border Intensity
Input Signal Priority
Off Timer (on/off)
Beep
Menu settings Menu Size
Information
Language
Menu Position
Translucent
Menu Off Timer
Power Indicator
Reset
Page 1: input signal, current displayed frequency and resolution,
Page 2: PowerManager setting, Off timer
Page 3: Model Name, Serial
Number and Usage Time
English, German, French, Spanish,
Italian, Swedish, Japanese
FineContrast
EIZO Logo
Adjustment lock
*1 Default Setting of the signal filter
Dot clock Default settings
~34MHz 3
34~49MHz 2
49MHz~ 1
-
√
√
√
√
√
√
Analog
Input
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
(3 pages)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
(3 pages)
Digital
Input
Default settings
- -
- -
- -
- -
- -
√
3
√
√
√
√
- *1
√
30%
√
√
6500K
2.2
√
√
0
0
100%
0
-
DVI DMPM
Full Screen
127 (Gray)
Signal1
Disable
On
Normal
Center
Opaque
45 sec.
Enable
-
-
English
Custom
On
Disable
Page 6/23
ColorEdge CE210W
No. SS-6616C
3.3 Others
• FineContrast selection
Following modes can be selected only by pushing Control button (Left/Right). At this time, small information window appears on the bottom-left corner.
FineContrast default settings
Custom
Calibration
30% 6500K 2.2 0 0
6500K - -
CAL(USB application control)
• Auto Adjustment, Range Adjustment (Only analog input)
Pushing the Auto adjustment button automatically centers the displayed image, adjusting the clock, phase level and resolution. Pushing the Auto Adjustment button while displaying the Range Adjustment menu automatically optimizes the tone of analog input signal.
• Adjustment Lock function
To Lock the buttons, switch the power on while pressing the Auto adjustment button. Then, the Auto Adjustment button and the settings on the ScreenManager are locked. Control buttons (Left, Right key) by FineContrast, brightness control buttons (Up, Down key), the Input signal selection button and the Power button remain enabled. FineContrast shortcut menu is always effective.
To unlock the buttons, switch the power on again while pressing the Auto adjustment button.
Page 7/23
ColorEdge CE210W
No. SS-6616C
Type
Size
Viewable Image Size
Dot Pitch
Face Treatment
Color TFT (VA type)
21.1 inch (53.4 cm)
453.6 mm (H) x 283.5 mm (V) (Diagonal: 534 mm)
0.270 mm x 0.270 mm
Haze44% Hard-coating (Hardness 3H*)
* Protection from scratching with the 3H pencil
(1) Guideline
Measured under the condition of the right diagram in the dark room or the same level condition.
Viewing Angle
θ11 (Top): 89° typ.
θ12 (Bottom): 89° typ.
θ21 (Left): 89° typ.
θ22 (Right): 89° typ.
Contrast Ratio 1000:1 typ.
Response time
Rise time 8ms typ.
Fall time 8ms typ.
Gray to
Gray
8ms typ.
Page 8/23
At Contrast Ratio;
CR
≥10:1 with white field and black field pattern.
θ=0°
(Contrast ratio with the center brightness of black field and white field pattern.)
10% 90%
Average response time between each grayscale level of 31, 63, 95, 127,
159, 191 and 223
ColorEdge CE210W
No. SS-6616C
Chromaticity White x:0.31, y:0.33 typ. White field. Measured at center of the panel.
Digital input. Color
Temperature: OFF
Color temperature: OFF
Bright Uniformity
Brightness
γ value
Red x:0.64, y:0.33 typ.
Green x:0.30, y:0.60 typ.
Blue x:0.15, y:0.06 typ.
(Lmax-Lmin)/Lmax x100
450 cd/ m ² typ.
≤ 25
2.2±0.1 (whole characteristic)
±5% of whole characteristics.
(Each point variation)
The light leakage is excluded.
Measured at below points in White field.
10% (1
90%
(4
(7
10%
(2 (3
(5 (6
(8 (9
50%
90%
50%
Measured at center of the panel with white field pattern at 25°C. (Default setting)
Calibration mode
γ = 2.2
Page 9/23
ColorEdge CE210W
No. SS-6616C
4.3 LCD Panel Qualification
* Panel qualification (Bright dots, Black dots) is guaranteed 6-month after production.
4.3.1 Definition
A dot observed through a ND filter or on the prescribed gray background is a bright dot.
A blinking dot is also counted as a bright dot.
A black dot observed by human eyes is counted as a black dot no matter how bright or big it is.
A set of coupled defective dots is counted as 1 defective dot. e.g.) A set of 2 coupled dot ··· counted as a 1 defective dot
A set of 3-coupled dot ··· counted as a 1 defective dot
A Single and/or coupled defective dot(s) is/are counted separately and applied each standard value. e.g.) a single defective dot, a 2-coupled dot ··· total 2 dots
A single and/or coupled defective dot(s) within the allowable distance/ area is/are counted separately and applied each standard value. e.g.) a single defective dot + a 2-coupled dot = 2 dots
A shining dot due to a foreign substance (transparent substance like acrylic chip) on polarizer is not counted as a bright/black dot. Inspect this shinning dot referring the standard of foreign substance.
4.3.2 Condition
Item Condition
Ambient light
Ambient temperature
About 500~700Lx
0~35°C
Observation distance from the panel surface
Measurement pattern
About 300~500mm (Straight angle)
White screen, Black screen
(Prioritize conditions of panel qualification)
Whole area Area Definition
Page 10/23
ColorEdge CE210W
No. SS-6616C
4.3.3 Panel Qualification
* Panel qualification (Bright dots, Black dots) is guaranteed 6-months after production.
Bright dot:
1 defective dot
(Green)
2 coupled
3 coupled or over
Total
Allowable distance/ area
2 or less
-
1 or less
0 or less
2 or less
Distance: 15 mm or less
Area:
φ -
Signal: black field pattern condition：
Dots visible on background of more than 96 levels of gray.
Couplled dots are defined as anyone of slasshed or dotted dot and the center dot in the picture below.
Black dot
1 defective dot
2 coupled
3 coupled
Total
Allowable distance/ area
5 or less
2 or less-
0 or less
5 or less
Distance: 5 mm or less
Area:
φ -
Signal: white, red, green and blue field pattern
Couplled dots are defined as anyone of slasshed or dotted dot and the center dot in the picture below.
Bright + black dots:
Total
Allowable distance/ area
5 or less
Distance -
Area - between bright dot and black dot is excluded.
It judges by the distance only of bright (Black) dot on one screen.
4.3.4 Measurement Standard of the outline
Items Values Notes
Scratch Line W
≤ 0.01mm
W
≤ 0.1mm
L
≤ 0.3mm
0.3 < L
≤ 5.0mm
-
3
W: width (mm.)
L: length (mm.)
Circle
W = -
0.1mm < W
D
≤ 0.5mm
5.0mm < L
W = -
0
0
3 D: diameter (mm.)
Foreign substan ce
Total
Line
Circle
0.5mm < D
W
≤ 0.01mm
W
≤ 0.08mm
L
≤ 0.3mm
0.3 < L
≤1.0mm
0
- W: width (mm.)
3 L: length (mm.)
W = - 1.0mm < L
0.8mm < W
D
≤ 0.1mm
D
≤ 0.3mm*
0.3mm < D
≤0.5mm
L = -
0.5mm < D
-
0
0
8
4
0
D: diameter (mm.)
*Tiny bright dot due to a foreign substance on
10 polarizer
Page 11/23
ColorEdge CE210W
No. SS-6616C
All measurements are subject to the conditions listed in 6.1, unless otherwise specified by the item in section 6.2 to 6.5.
5.1 Standard measurement conditions
Items Condition
Pattern of the signal
Video signal level
Brightness
Analog input Digital input
Black and White two dotted mesh pattern
0.7 Vp-p 75
Ω terminal
TMDS Single Link
100 % (Custom)
Gamma value 2.2
Ambient temperature & humidity 15 ~ 35°C
Input current
Measurement
AC100-120V±10% 50/60Hz
AC200-240V±10% 50/60Hz
After warm up for at least 30 minutes
Mode VESA 1650 Dots x 1050 lines @60 Hz
Items
Analog input
Scanning Frequency
Horizontal 24kHz ~ 82kHz
Vertical 49Hz ~ 86Hz
1280 x1024 Mode: ~76Hz
1680 x 1050 Mode: ~61Hz
Synchronizing range 59.0~61.0Hz
Display Area Size
Display Colors
453 x 283mm
16.7 million colors
Values
Digital input
31kHz ~ 65kHz
59 ~ 61Hz
(VGA TEXT: 69 Hz ~ 71 Hz)
Conditions
Non Interlaced
Items
Analog input
Retrace Time
Min sync pulse width Horizontal: 0.5
µS
Min sync pulse +
Back Porch
Vertical: 1 H
Horizontal: 1.2
µS
Vertical: 12 H
Signal input
Sync Input Signal
Form
Video Input Signal
Form
Input Signal
Dot Clock
Values
Digital input
Horizontal: 0.5
Vertical: 1 H
Vertical: 12 H
µS
(a) H/V Separate, TTL, Positive
/ Negative
(b) H/V Composite, TTL,
Positive/ Negative
Analog, Positive
(0.7 Vp-p / 75
Ω)
-
150MHz Max.
TMDS (Single Link)
120MHz Max.
Conditions
The image is not lacked.
The image is adjustable to the center
Page 12/23
5.4 Power Supply
Items
Input voltage
Values
Analog input
100-120 VAC
±10 % 50/60 Hz
200-240 VAC
±10 % 50/60 Hz
Input current 80W or less
Less than 0.8A at 100-120 VAC
Less than 0.45A at 200-240 VAC
70W or less
Less than 0.7A at 100-120 VAC
Less than 0.4A at 200-240 VAC
In-rush current
Leakage current
70 A peak max. (Cold)
100 A peak maxi. (Hot)
Less than 0.25mA at 100VAC
Less than 0.7mA at 240VAC
Power Consumption
Power saving mode 2W or less *1
Standby power consumption
1W or less *2
Digital input
DVI-DMPM
ColorEdge CE210W
No. SS-6616C
Condition
USB load
No USB load
AC246V Input
AC100/115/230V,
USB upstream port in non-operation.
*1 Single input signal
*2 When secondly power is off. No USB.
Power save function VESA DPMS
Page 13/23
ColorEdge CE210W
No. SS-6616C
6.1 Configuration
NOTE: All of the dimensions, weights and angles below are reference values.
With Stand
Dimensions (net)
Weight (net)
Tilt Angle
Rotation Angle
Outline Drawing
501mm (W) x 341.1~459.5mm (H) x 230mm (D)
19.7” (W) x 13.4” - 18.1” (H) x 9.1” (D) approx. 8.2kg (18.1 lbs)
Up: 60
° Down: 5°
Right: 172
° Left: 172°
Refer to the below.
Unit: mm (inches)
466(18.3)
1
172˚
SWIVEL
172˚
501(19.7)
55.6(17.9)
1(0.04)
22.7(0.89)
1(0.04)
5˚
TILT
25˚
457.6(18.0)
344.2(13.6)
100(3.9)
80(3.15)
25(0.98)
116(4.6)
Page 14/23
Without Stand
Dimensions (net)
Weight (net)
Hole spacing
Screw mounting hole size
Outline Drawing
501(19.7)
55.6(17.9)
22.7(0.89)
ColorEdge CE210W
No. SS-6616C
501 mm (W) x 355 mm (H) x85 mm (D)
19.7” (W) x 14.0” (H) x 3.35” (D)
Approx. 5.8 kg (12.8 lbs)
Compatible with VESA standard
100 mm x 100 mm
4-M4
Refer to the below.
85(3.35)
60(2.36)
200.5(7.9) 100(3.9)
Unit: mm (inches)
200.5(7.9)
25(0.98)
NOTE: All of the dimensions and weight below are reference values.
Packing Dimensions 600 mm (W) x 530 mm (H) x 325 mm (D)
23.6” (W) x 20.9” (H) x 12.8” (D)
Packaging weight approx. 11.2kg (32.4 lbs)
Stack limit 4 units (Maximum)
Packaging Drawing Refer to page 25
Page 15/23
ColorEdge CE210W
No. SS-6616C
(1) DVI-I connector
1
9
17
2
10
18
3
11
19
4 5 6
12
20
13
21
14
22
7
15
23
8
16
24
C1 C2
C3 C4
C5
Pin No.
Input Signal Pin No.
1 TMDS Data211
4 shielD
- 14
(2) USB Ports
16
(SCL)
7 DDC 17
Data(SDA)
18
Sync
9 TMDS Data119
20
Input Signal Pin No.
TMDS Data1/3
Input Signal
21 -
ShielD
+5V Power for +5V, H sync and V sync)
Hot plug Detect
TMDS Data0-
TMDS Data 0+
TMDS Data/5
ShielD
-
24
C2
C3
C4
ShielD
TMDS Clock-
Analog Green
Analog Blue
Analog
Horizontal Sync
-
(analog R,G & B return)
-
Upstream Downstream
Series B Connector Series A Connector
No. Signal Note
2 - Data Serial Data
Page 16/23
ColorEdge CE210W
No. SS-6616C
6.4 Materials
Stand ABS
Packing Case Cardboard
Packing Cushion Foam polystyrene
6.5 Free Mount installation conditions
It is possible to perform free mount installation in the following combination.
Monitor rotation direction Inclination on the surface
(A)
(B)
(1), (2), (4) and the middle
(1), (2), (4) and the middle
Page 17/23
ColorEdge CE210W
No. SS-6616C
7 ACCESSORIES
7.1 Accessories
Item
Power Cord
Signal Cable
Setup Guide
User’s Manual
CD-ROM (EIZO LCD Utility Disk)
Quick Reference
Warranty Card
2.0 m, VDE approved separate cord with 3 pin plug
2.0 m, UL/CSA approved separate cord with 3 pin plug
2.0 m, BS approved separate cord with 3 pin plug
2.0 m, SEV approved separate cord with 3 pin plug
2.0 m, BSMI approved separated cord with 3 pin plug
2.0 m, CCC approved separate cord with 3 pin plug
FD-C39 (DVI-D~DVI-D, 2.0m)
FD-C16 (DVI-I~D-sub mini 15pin-15pin, 2 m)
MD-C93 (USB Cable)
English, German, French
Taiwan (Supplied)
Chinese
Refer to section 8.2
English and Japanese
English, German, French
Adjustment Certificate English and Japanese
Screw for the mount option installation
√* Color: Black
4 pcs of M4 x 12
(Note) Precaution or notation sheets may be added or removed.
√ √*
√ √*
√ √*
√ √*
√ √*
√ √*
√ √ √ √ √ √ √* √* √* √* √* √*
√ √ √ √ √ √ √* √* √* √* √* √*
√ √ √ √ √ √ √* √* √* √* √* √*
√ √ √ √ √ √ √ √ √ √ √ √
√ √
√ √
√ √ √ √ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √ √ √ √
√ √ √ √ √ √ √ √ √ √ √ √
Page 18/23
7.2 EIZO LCD Utility Disk
Launcher software
Monitor manual
ColorNavigator CE
ColorNavigator CE manual
Screen adjustment software
INF file
INF file manual
ICC / ColorSync Profile (2 kinds)
ICC / ColorSync Profile Manual
Readme
√
√ (
English, Japanese, German, French )
√ (2000/XP)
√ (English, Japanese)
√
√
√ (
English, Japanese, German, French )
√
√ (
English, Japanese, German, French )
√ (
English, Japanese, German, French )
√
√ (
English, Japanese, German, French )
√ (OS X)
√ (English, Japanese)
√ (OS 9 OS X)
-
-
√
√ (
English, Japanese, German, French )
√ (
English, Japanese, German, French )
ColorEdge CE210W
No. SS-6616C
Page 19/23
ColorEdge CE210W
No. SS-6616C
8 CERTIFICATIONS & STANDARDS
8.1 Certifications
Standard Origin
TÜV/GS EN60950-1:
CE [72/23/EEC:Low Voltage Directive]
EN60950-1
[89/336/EEC:EMC Directive]
EN55022 (Class B)
EN55024
EN61000-3-2
EN61000-3-3 c-TÜV-us UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC FCC part.15 subpart B Class B
ICES-003 ICES-003 Class B (Canada)
TÜV/Ergonomie ISO13406-2 prEN 50279
√
√ √ √
√
√
√
√ √ √ √ √ √
TCO’03 TCO’03 Flat Panel Displays
Ecological requirement
Type Approval (-TR only) CNS13438 (Class B)
CNS14336
√ √ √ √ √ √
CCC (Planned) GB4943
GB9254
GB17625.1
C-tick
(Australia, New Zeeland)
AS/NZS CISPR22 (Class B)
AS/NZS 61000.3.3
AS/NZS 61000.3.2
Energy Star Energy Star Ver.4.0
√ √ √ √
(Caution) In order to comply with the standards in the chart above, it is necessary to bundle the Power Cord and User’s Manual specified by these standards.
√
√
8.2 Standards
Organization Origin
CB IEC60950-1
√ √ √ √ √ √
EC Directive
RoHS (2002/95/EC)
√ √ √
WEEE (2002/96/EC)
VESA
EIZO NANAO
DPMS
DDC2B
EIZO Eco Products 2004
√ √ √ √ √ √
DDWG Digital Visual Interface (DVI) Revision 1.0 √ √ √ √ √ √
USB Implementers Forum Universal Serial Bus (USB) Specification Revision 2.0 √ √ √ √ √ √
√ √ √ √ √ √
CORPORATION
(Caution) In order to comply with the standards in the chart above, it is necessary to bundle the
Power Cord and User’s Manual specified by these standards.
Page 20/23
ColorEdge CE210W
No. SS-6616C
(1) White color version
(2) Black color version
(Note) Additional standards or marking may be added to this label.
In accordance with this addition, the label code (05D***), in the lower left bottom corner will be changed.
Page 21/23
ColorEdge CE210W
No. SS-6616C
9 RELIABILITY & OPERATING ENVIRONMENT
9.1 Reliability
Item
MTBF
(Meantime between failure)
Value
30,000 hours at standard power input excluding backlights.
Backlight life 50,000 hours min.
Conditions
Values calculated according to the simplified "Parts Count Reliability
Prediction" method as specified in
MIL- HDBK-217F.
25
°C for only backlight temperature, at maximum brightness, More than 50% of maximum brightness at the default
Item Value Conditions
Ambient Operation 0 °C~35 °C (32 °F~95 °F)
Temperature Storage -20 °C~60 °C (-4 °F~-140 °F) To be kept for 4 hours at 25 °C
<77°F> before use.
Non condensing Ambient
Humidity
Operation 30 %~80 % R.H.
Storage 30 %~80 % R.H.
Altitude
Vibration
Operation up to 3,000 m (9,840 ft.)
Shipping up to 12,000 m (39,370 ft.) or Storage
(Standard Package)
To be free from any damage on the vibration test (left/right, up/down, forward/backward) to be carried out under the following conditions.
Frequency: 5~100~5 Hz in every 10 minutes
Speed: 1.0G
Time: 1 hour for each direction
Drop Test
(Standard Package)
To be free from any damage on free drop from 65 cm height.
To be validated one corner, three edges and six faces.
Page 22/23
10 REVISION TRACE
No. Date
A 24 January 2006 Established
ColorEdge CE210W
No. SS-6616C
Alternation
C 2 August 2006
Countries (ED, ES, UK, CN, TR) added
Page 2: 1. About the specifications
Page 4: 2.4 Limited warranty
Page20: 8.1 Accessories
Page 21: 9. Certifications and standards
User’s Manual (for TR, CN) added
Page 20: 8.1 Accessories
Page 25: 11. Packaging specification
Certifications (CCC, Type Approval) added
Page 21: 9.1 Certifications
Name plate changed
Page 23: 9.3 Name plate
EMC Label added
Page 25: 11. Packaging specification
Combination list changed
Page 19: 7.5 Free mount installation conditions
Packing Dimensions corrected (616 x 653 x 326mm 600 x 530 x 325mm)
Page 17: 7.2 packing Specifications
Revised
Following items deleted
• Features
• Brightness adjustable range
• Packaging specification
• EAN/UPC Code
• Options
Chromaticity: Gx 0.29 0.30
Brightness uniformity changed
{(Lmax)/(Lmin)–1} x 100
≤ 25 (Lmax-Lmin)/Lmax x100 ≤ 25
• Page 9: 4.2 Optical specifications
Packing cushion added
• Page 17: Packing specification
Note added
• Page 18: Accessories
• Page 21: Name plate
Page 23/23
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement