Craftsman | 973.114250 | Operator`s manual | Craftsman 973.114250 Operator`s manual

Operator's Manual
II:RRFTSMRN1
CORDLESS
DRILL-DRIVER
3/8 in.- 15.6 Volt- Variable Speed - Reversible
Model No,
973.114250
Save this manual
for future reference.
CAUTION:
Read and follow a{l safety rules and
operating instructions
before first use of this product.
Customer
Sears,
Visit
Help Line: 1-800-932-3188
Roebuck
and Co., 3333 Beverly
the Craftsman
Web
page:
Rd,, Hoffman
Estates,
www.sears.comicraftsman
IL 60179
USA
m
I
Warranty .................................................:.............................................................................................................................
Introduction ..............................................................................................................................................................................
2
2
i
General Safety Rules .................................................................................................................................................................. 3-4
IB
Specific Safety
I
Symbols ..........................................................................................................................................................................................
I!
SpeclficatJons
IR
Unpacking ................................................................................................................................................................................
7
il
Features
8
I
Adjustments
II
Operation
Rules ............................................................................................................................................................................
4-5
6
........................................................................................................................................................................................
7
......................................................................................................................................................................................
.............................................................................................................................................................................................
9-10
.........................................................................................................................................................................................
11-13
I
Maintenance
I
Accessories
................................................................................................................................................................................... 14
I
Exploded
i
Parts, Ordering, and Service ...................................................................................................................................................
..........................................................................................................................................................................
!5
View and Repair Parts List ................................................................................................................................
17
FULL ONE YEAR WARRANTY
ON CRAFTSMAN
18
DRILL-DRIVER
If this CRRI:tFSMFIH tool fails to give complete satisfaction within one year from the date of purchase,
RETURN tT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears wil! repair It, free of charge.
If this I:RRFTSMRN
date of purchase_
This warranty
tool is used for commercial or rental purposes, this warranty
gives you specific
Sears, Roebuck
legal rights, and you may also have other rights which vary from state to state.
and Co., Dept. 817 WA, Hoffmen
Estates,
Your drill-driver has many features for making the use of
this tool more pleasant and enjoyable. Safety,
performance, and dependability have been given top
priority in the design of this tool making it easy to
maintain and operate°
_k
applies for only 90 days from the
Look for this symbol to point out important
Your safety is involved.
IL 60179
_k
safety
WARNING:
Do not attempt to use tt_istool until
you thoroughly read and completely understand
the operator's manual, Pay close attention to the
safety rules, Including Dangers, Warnings, and
Cautions_ If you use your tool properly and only for
what it is intended, you will enjoy years of safe,
reliable service.
precautions.,
It means
attentionlH
WARNING'
The operation of any router can result in foreign objects being thrown into your
eyes, which can result in severe eye damage_ Before beginning operation, always wear
safety goggles or safety glasses with side shleld_ and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields. Always wear eye protection which is marked to comply with ANSI Z67.1 ..
A
WARNING:
Read and understand ell
instructions. Failure to follow all instructions listed
below, may result in electric shock, firs and/or
serious personal iniury,
on the switch cr piugging in tools that have the
switch on, invites accidents.
[]
SAVE THESE INSTRUCTIONS
III
WORK AREA
Illl Keep your work area cleon and well lit. Cluttered
benches and dark areas inviteaccidents.
[]
II
Do n_t operate power tools in explosive atmospheress such as in the presence of flammable
liquids, gases, or dust. Power tools may create
sparks which may ignite the dust or fumes.
Keep bystanders, children, end visitors away
while operating a power tool. Distractions can
cause you to [ose con1:roL
ELECTRICAL
IE
Never use the cord to
carry the charger. Keep cord away from heat, o11,
sharp edges, or moving parts. Replace damaged
cords Immediately. Damaged cords may create a
fire
[]
TOOL
[]
SAFETY
Do not abuse the cord.
III
A battery operated tool with integral batteries or
a separate battery pack must be recharged only
with the specified charger for the battery. A
charger that may be suitable for one type of battery
may create a risk of tire when used w_thanother
battery. Use battery only with charger listed.
BATTERYPACK
131ld44 (ItemNo_9-1100_)
CHARGER
[]
[]
B
I
982031-001(itemNo. _.! 1005)
It
Use battery operated tool only with specifically
designated battery pack, Use of any other
batteries may create a risk of fire. Use only with
battery pack listed.
PERSONAL
i!
[]
SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of
insttentionwhile operating power tools may result in
serious personal Injury.
Dress properly. Do not wear loose €lothing or
Jewelry, Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Looseclothes, jewelry, or long hair can be caught in
moving parts.
ill Avoid accidentol starting. Be sure switch is off
before plugging In. Carrying toolswith your finger
Remove adjusting keys or wrenches before
turning the tool on. A wrench or a key that isleft
attached to a rotatingpart of the tool may result in
personalInjury
Do not overreach. Keep proper footing and
balance at all times. Proper footingand balance
enables better control of the tool in unexpected
situations, Do not use on a ladder or unstable
support.
Use safety equipment. Always wear eye protection. Dust mask, non-skidsafety shoes, hard hat, or
headng prote_on must be used for appropriate
condffions.
iii
iI
[]
[]
USE AND
CARE
Use clamps or other practical way to secure and
support the workplece to a stable platform. Holding the work by hand or against your body ls unstable
and may lead to loss of control
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Do not use tool If switch does not turn It on or off.
A tool that cannot be controlled with the switch is dangerous and must be repaired,
Disconnect battery pack from toot or place the
switch in the locked or off position before making
any adjustments, changing accessories, or storIng the tool. Such preventive safety measures reduce
risk of starting the tool accidentally
Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the hands
of untrained users.
When battery pack Is not In use, keep it away from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminaJs together may cause
sparks, burns, or a fire.
Maintain tools with core, Keep cutting tools sharp
and clean, Properly maintained too_s with sharp cutting edges are less likely to bind and are easier to control.
Check for misalignment
or bindtng of moving parts,
breakage of parts, and any other condition that may
affect the tool's operation. If damaged, have the
tool serviced before using, Many accidents are
caused by poorly maintained tools.
Use only accessories that are recommended
by
the manufacturer for your model. Accessories that
may be suitable for one tool, may create a risk of In.
jury when used on another tool
SERVICE
Ill
II
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed by unqualified personnel could result in a risk
of injury°
When servlclng a tool, use only identical replacement parts. Follow instructions In the Maintenance section of this manual. Use of unauthorized
parts or failure to follow Maintenance Instructions
may create a risk of electric shock or injury
Hold tool by Insulated gripping surfaces when performing an operation where the tool may contact hidden
wiring ortts cord. Contact with a "live" wire will make exposed metal pans of the tool "live" and shock the operator
CORDLESS
[]
II
TOOL RULES
CHARGER
Cordless tools do not have to be plugged Into an
electrical outlet; therefore, they are always in operating condition. Beaware of possible hazards when
not using your cordless tool or when changing
accessories. Followingthis rulewillreduce the risk of
electric shock, fire, or serious personal injury.
IN Do not place cordless tools or their batteries near
fire or heat. This will reduce the risk of explosionand
possiblyinjury.
_i.
WARNING: A damaged battery is subject to
explosion, To avoid serious personal injury,
properly d(sposeof a damaged batlery..
Know your power tool. Read operator's manual
carefully. Learn Its applications and limltat!ons,
as well as the specific potential hazards related
to this tool. Following this rule will reduce the riskof
electric shook, fire, or seriousinjury'r,
WARNING:
Batteries vent hydrogen gas and can
explode in the presence of a source of ignition,
such as a pilot I)ght° To reduce the risk of serious
personal injury, never use any cordless prod_jct in
the presence of open flame An exploded battery
call propel debris and chemical. If exposed, flush
with water immediately,
Ii
Do not charge cordless tool In a damp or wet
location. Following this rule will reduce the risk of
electric shock.
Ill
For best results,your
cordless tool should be charged
in a location where the temperature Is more than
50°F but less than 100_F, Do not store outside or in
vehicles.
II
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in con,
tact with your skin, wash imrnedlately with soap
and water, then neutralize
with lemon juice or
vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 mlnutes_ then seek
immediate
medical attention, Following this rule wilt
reduce the risk of serious personal injury
SAVE THESE
RULES
=
Save these instructions.This
manual contains tinportent safety and ope_'ating instructions
for
charger. Following this rule w)l| reduce the risk of
electric shock, fire, or ser(ous personal injury.
[]
Before using battery charger, read all instructions
and cautionary markings in this manual, on battery
charger, and product using battery charger. Following this nJle will reduce the risk ofelectric shock, fire,
or serious personal Jnjuryo
[]
To reduce risk of injury, charge only nicke!-cad.
mlum type rechargeeble
batteries. Other types of
batteries may burst causing personal Injury and
damage. Following this rule wU( reduce the risk of
electric shock, fire, or serious personal injury,
[]
Do not expose charger to wet or damp conditions.
Following this rule will reduce the risk of e(ectrio shock.
fire, or serious personal injury.
Ill
Use of an attachment not recommended or sold by
the battery charger manufacturer
may result in a
risk of flre_ electric shock, or injury to persons.
Following "_hlsrule will reduce the riskof electric shock,
fire, or serious personal injury
m
To reduce risk of damage to charger body and
cord, pull by charger plug rather than cord when
disconnecting
charger.
Following this rule wi)( reduce the risk of electric shock, fire, or serious personal
injury
Make sure cord ls located so that It will not be
stepped on, tripped over, or otherwise subjected to
damage or stress. Following this rule will reduce the
risk of serious personal injury.
IN
INSTRUCTIONS
Ill
An extension cord should not be used unless
absolutely necessary.
Use of improper extension
cord could result in a risk of fire and electro shock. If
extension cord must be used, make sure:
a, That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
c. That wire size is large enough for AC ampere rating
of charger as specified below:
Cord I_ength (Feet)
25'
50'
100'
• lead from lead-based paints,
Cord Size (AWG)
16
16
16
Note: AWG = American Wire Gage
Do not operate charger with a damaged cord or
plug. If damaged, have replaced Immediately by a
qualified serviceman.
Following this rule wiil reduce
the risk of electric shock, fire, or serious personal injury
[]
Do not operate charger if it has received a sharp
blow, been dropped, or otherwlss damaged in any
way; take it to a qualified serviceman. Following this
rule wilJreduce the risk of electric shock, fire, or serious
personal injury°
In
Do not disassemble charger; take It to a qualified
serviceman when service or repair is required.
Incorrect resssembly may result in e risk of electric
shock or fire. Foliowing ",his rule will reduce the risk of
electric shock, fire, or sedous persona! injury°
Ill
To reducethe risk of electr|cshock, unplug charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this
risk. FOllowing this rule will reduce the risk of electric
shock, fire, or serious personal injury°
II
Do not use charger outdoors. Following this rule will
reduce the risk of eleclric shook, fire, or serious personal injury.
[]
Disconnect charger from power supply when not
In use, Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
_lb
A
WARNING:
Some dust created by power sanding.
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
b. That extension cord is properly wired and in good
electrical condition; and
II
Save these instructions. Refer to them frequently
and use them to Instruct others who may use this
tool, If you loan someone this tool, loan them these
Instructions also. Followingthis rule will reduce the
risk of electric shock, fire, or serious personal injury.
DANGER:
Risk of electric shock Do not touch
uninsuiated portlon of output connect or
uninsulated battery terminal
• crystalline silica from bricks and cement
other masonry products, and
• arsenic
lumbar.
and chromium
and
from chemically-treated
Your risk from these exposures varies, depending
on hew often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles..
Important:Some
Proper interpretation
SYMBOL
V
of the _ollowing symbols may be used on your tool. Please study them and learn their mean}ng.
el these symbols will atlow you to operate the tool better and safer.
NAME
DESIGNATIONIEXPLANATION
Volts
Voltage
,
A
,,,,
,, ,,,,,,,,,,,,,,,
Current
Amperes
LL,, L_L,L
Hz
t
Hertz
Frequency (cycles per second)
Watt
Power
..........
W
i
rain
Minutes
Alternating
,,,
ii i
:::::::::::::::::::::::::::::
Time
Type or a characteristic of current
Current
, , ,,,,,,,,,,,,,,,,,,,,,,
i i
Direct Current
Type or a characteristic
No Load Speed
Rotational
of current
i i H,I
no
speed, at no load
IHHI,
[]
Double-insulated
Class tt Construction
,, i1,1111
_.lmin
(_
,,,,,,,.
construction
i i ii IHI,,I,III,
Per Minute
Revolutions, strokes, surface speed,
orbits etc. per minute
Safety Aletl
PrecaUtions
Wet Conditions Alert
Do not expose to rain or USe in damp
locations
,,, ,,,, ,,,,,,,,,,,
..... ,,_,
,,,,_,,,L
•
•
that involve your safety
, i,,,1,,
?'he purpose of safety symbols is to attract your attention to possible dangers_ The safety symbols, and the
explanations with them, dasen_e your careful attention and understanding, The safety warnings do not by
themselves eliminate any danger, The instructions or warnings they give are not substitutes for proper accident
prevention measures..
SYMBOL
MEANING
DANGER: Indicates
serious injury.
,&
WARNING;
an imminently
Indicates apotentially
hazardous
situation, which, if not avoided,
will result in death or
hazardous situation, which, if not avoided, could result in serious Injury,
i
CAUTIONs" Indicates
moderate injury.
a potentially hazardous
situation, which,
i iii ii i iiiii
Imp0'rtanti Advises you of important information or instructions
the equipment.
if not avoided,
I,HH
may result in minor or
i ii ,I,HIIIIII,,,,,I,HI
I
I
vital to the operation or maintenance
Note= Advises you of additional information concerning the operation or maintenance
6
i i H,i i, HHI,,H,,,,,,,,
_
of
of the equipment.
Before using the drill-driver, familiarize yourself with all
operating features and safety requirements. However,
do not let familiarity with the tool make you careless.
_IL WARNING: Exercise caution when using the ddl!driver. Careless actions, for even a fraction of a
second, can result in serious personal injury,
SWITCH
The drill-driver
VARIABI.E
has a conveniently located trigger switch.
SPEED
The variable speed feature allows you to operate the
drilFddver at a higher speed and torque when
necessary,,
KEYLESS CHUCK
Your new drill-driverhas a keyless chuck. As the name
implies,you can hand tighten or release drill bits in the
chuck jaws..Grasp and hold the collar of the chuck with
one hand. Rotate the chuck body with your other hand,
"['hearrows on the chuck indicate which direction to
rotate the chuck body In order to LOCK (tighten) or
UNLOCK (release) the drill bit.
TORQUE ADJUSTMENT
You can easily adjust the torque of the drill-driver, The
maximumtorque is 100 in,lb,
BI-DIRECTIONAL
ROTATION
The drill-driver has a convenientlylocated switch that
allows you to easily change the direction of the bit
rotation.
LEVEL DRILLING
A level is recessed in _hemotor housingon top of the
drill-driver, which allows you to keep drill bits level
during drilUngoperations.
BIT STORAGE
When you are not using the drilf-drlver,you can store
the bits in the storage area located on the top of the
drill
WRIST STRAP
A wrist strap is providedto reduce the chances of
droppingthe drill.driver.Place one hand through the
wrist strap when carryingthe tool
LEVEL
BITSTORAGE
B_S
KEYLESSCHUCK
BATTERYPACK
BATTERY
CHARGER
\
SELEC]OR
SWITCH
RED
LIGHT
CHARGING
STAND
BATrERYPACK
SHOWNONTOOL
WRIST STRAP
Fig. 1
DRILL-DRIVER
CHARGER
Chuck .....................................................................
318 inr Keytess
Maximum Torque ....................................................
!00 inolbS
Switch ............................................................
Variable Speed
ASSEMBLY
Charger input ..........................
120 volts, 60 Hz, AC oniy
Charger Voltage ........................................................ 15,6 Volt
Charge Rate ............................................................3 - 6 Hours
Clutch ....................................................................
24 positions
Motor ...............................................................
DC, 15,6 Volt
No Load Speed ....................................................
0 - 6001rain
INSTRUCTIONS
PACKING
We have shipped the dril-driverl completely assembled,
Drill.driver
II
Battery (2)
Carefully remove the tool and the accessories from
the box. Make sure that all items listed in the packing
list are included,
Ill Inspect the tool carefully to be sure no breakage
damage occurred during shipping,
I
or
Do not discard the packing material until you have
carefully inspected and satisfac'_orily operated the
tool.
Ill If any parts are damaged or missing, please call
1-800-932-3188
for assistance,
LIST
Charger
Carrying Case
Operator's
Manual
_I, WARNING: If any parts are missing, do not
operate your too] until the missing parts are
replaced, Failure to do so could resutt {n serious
personal injury.
WARNING: The drifl-driver should never be
connected to a power supply when you are
assembling parts, making adjustments, cleaning,
performing maintenance, or when the tool is not in
use,, Disconnectingthe tool prevents accidental
starting that could cause serious injury,
INSTALLING
See Figure 2,
BITS
Follow these steps to installbits..
1o Lock the trigger switch by ptacfngthe rotation
selector in the center position°
2, Open or close chuck jaws to a point where the
opening is slightly larger than the bit size you intend
tO use.
3.
Fig, 3
Raise the front of the driiFddverslightly to keep the
bit from falling out of the chuck jaws,
CHUCKJAWS
WARNING: Do not hold the chuck body with one
hand and use the power of the drUl-driverto tighten
the chuck jaws onto the drill bit. The chuck body
could slip in your hand or your hand could slip and
come in contact with the rotating drill bit° This could
cause an accident resulting in serious personal
injury°
CHUCKBODY
REMOVING
DRILLBIT
Follow these steps to remove bits
1.
Lock the trigger switch by placing the rotation
selector in the center position°
2.
Loosen the chuck jaws°
CHUCK COLLAR
Note: To loosen the chuck jaws, grasp and hold the
collar of the chuck with one hand, while rotating the
chuck body with the other hand, Rotate the chuck
body in the directionof the arrow marked UNLOCK,
Do not use a wrenchto tighten or loosen the chuck
jaws_
Fig. 2
4.
Insert the drill bit into the chuck the full length of the
jaws,
5, Tighten the chuck jaws ontothe drillbit,
Note: To tfghten the chuckjaws, grasp and hold the
collar of the chuck with one hand, while rotatingthe
chuck body with the other hand, Rotate the chuck
body in the direction of the arrow marked LOCK. Do
not usa a wrench to tighten or loosen the chuck
jaws,
,_
BITS
See Figure 2,
WARNING: Make sure to insert the drill bit
straight into the chuckjaws, Do not insert the drill
bit into the chuck jaws at an angle (as shown in
figure 3) and then tighten, This could cause the drill
bit to be thrown from dritkddver, resulting in sedeus
personal injury or damage to the chuck.
3
Remove
the drill bit from the chuck jaws,
REMOVING
THE
You must remove
acce99ories,
CHUCK
the chuck in order to use some
8.
Relnsert the hex key into the chuck.
9.
Tighten the chuck jaws securely using the chuck
key provided.
10. Loosen the chuck by tapping the hex key sharpty
with a maltet in a counterclockwise direction
See Figures 4, 5, and 6.
Follow these steps to remove the chuck.
11, Unscrew the chuck by hand°
1.
Lock the trigger switch by placing the rotation
selector in the center posilion.
2.
Open the chuck jaws by turning the chuck collar
counterclockwise.
3.
Insert.a 6!16 in, or larger hex key into the chuck._
4o
Tighten the chuck jaws using the chuck key provided.
MALLEi
KEYLESS
CHUCK
CHUCK
JAWS
Fig., 6
WRENCH
TIGHTENING
5,
Loosen the chuck screw by tapping the hex key
sharply with a mallet in a clockwise direction,
6.
Open the chuck Jaws and remove the hex key_
7.
Remove the chuck screw by turning it in a clockwise
direction with a screwdriver.
A LOOSE
CHUCK
The chuck may become loose on the spindle and
develop a wobbler Periodically. check the chuck screw
for tightness. A loose screw may cause the chuck jaws
to bind and prevent them from closing°
Fo|low these steps to tighten a loose chuck.
Note: The screw has left hand threads.
1.
Lock the trigger switch by placing the rotation
selector in the center position
2.
Open the chuck jaws by turning the chuck collar
counterclockwise.,
3.
Insert a 5/16 in. or larger hex key into the chuck
4.
Tighten the chuck jaws using the chuck key provided.
5
Tap the hex key sharply wlth a mallet in a clockwise
direction to tighten the chuck on the spindIe
6, Open the chuck jaws and remove the hex key,
7_, Tighten the chuck screw by turning It in a counterclockwise direction with a screwdriver.
Note: The screw has left hand threads,,
Fig° 5
10
INSTALLING THE BATTERY PACK
See Figure 7.
Follow these steps to installthe battery pack.
1. Lock the trigger switch by placing the rotation
selector in the center position.
_1_ WARNING: Always wear safety gogglesor safety
glasses with side shields when operating this tool.
Failure to do so could result in dust, shavings,
chips, or loose particles being thrown in your eyes
resulting in possible serious injury. If the operation
is dusty, also wear a face or dust mask,
CHARGING
THE BA"I'rERY
2.
3.
PACK
The battery pack for this toot has been shipped in a low
charge conditionto prevent possible problems°
Therefore, you should charge it at least 3 to 5 hours
prior to use_
Note: The batteries wilt not reach tull charge the first
time they are charged. Allow several cyctes (drilling
fotlowed by recharging)for them to become fully
charged,
Place the battery pack on the drill-driver.
Make sure the latches on each side of the battery
pack snap into place and the battery pack Is secured on the tool before beginning operation,
CAUTION;
When placing the battery pack on the
drill-driver, make sure that the raised rib inside the
drill-driver aligns with the groove on the battery
pack and that the latches snap into place properly.
Improper assembly of the battery pack can cause
damage to inlernal components°
Follow these steps to charge the battery pack.
1. Connect the battery charger to a power supply.
Note: Make sure the power supply is normal house
voltage, I20 volts, 60 Hz, AC only.
2.
Place the battery pack in the charging stand..
3.
Press down on the battery pack to ensure that the
contacts on the battery pack engage properly with
the contacts in the charging stand,
The red light on the base of the charging stand comes
on when you have properly installed the battery pack_
BATTERYPACK
Note: If the charger does not charge the battery pack,
return the charger, battery pack, and charging stand to
the nearest Sears repair center for an electrical check,
t
=m After normal usage, 3 hours of charging time is required to be tully charged. A minimum charge time of
3 to 5 hours is required to recharge a completely
discharged tool
[]
Unplug the charger from the power suppiy when the
battery becomes fully charged.
[]
Charge the battery pack only wlth the charger
charging stand provided.
II
The battery pack wilt become slightly warm to the
touch whi_e eharging_ This Is normal and does not
indicate a problem.
Ill
LATCHES
and
/
DEPRESSLATCHESTO /
RELEASE BATTERY PACK
Do not placethe charger in an area of extreme heat or
cold.. It works best at normal room temperature,
Fig 7
REMOVING THE BATTERY PACK
Followthese steps to remove the battery pack
1, Lock the trigger switch by placingthe rotation
selector in the center position.
2.
3.
t1
Depress the latches on the slde of battery pack
Remove the battery pack from the drill-driver
TURNING ON/OFF THE DRILL-DRIVER
See Figure 8_
ADJUSTING THE TORQUE
See Figure&
Follow these steps to turn onlofl the driN-driver,
The drill-driveris equipped with an adjustable torque
clutchfor driving differenttypes of screws into different
materials. The proper setting depends on the type of
matedal and the size of screw you are using_
m
II
Turn on the drill-driver-Depress the triggerswitch_
Turn off the dr#l-driver-Release the tdgger switch.
LOCKING THE SWITCH
See Figure 8.
Followthese steps to adjust the torque,
1.
You can lock the trigger switch in the OFF positionto
prevent accidenta!starting when the tool is not in use.
To lock the switch, place the rotation selector in the
center position
Identify the twenty four torque indicator settings
located on the front of the drill-driver,
2,
Rotate adjusting ring to the desired setting.
"
.
WARNING:
Battery tools are always in operating
condition. Therefore, always lock the switch when
you are not using the tool or when you are carrying
the tool
ADJUSTING
THE SPEED
AdjUst the speed with the trigger switch, The harder you
press the trigger, the faster the bit turns,
1-4
For driving small screws
5-8
For driving screws into soft material
9-12
For driving screws into soft and herd
materials.
t3-16
For driving screws
17-20
For driving large screws.
2t-_iI
For heavy drilling
TO DECREASE
TORQUE
Note: You might hear a whistling or tinging noise from
the switch during use. Do not be concerned, this is a
normal part of the switch function,
in hard wood.
ADJUSTING
RING
ROTA_ON
SELECTOR
CENTER POSITION
(LOCK)
TOINCREASE
TORQUE
f
Fig,9
TRIGGER FORWARD
SWITCH
CHANGING THE BIT ROTATION
See Figure &
Fig. 8
Follow these steps to change the bit rotation
1. Positionthe drill-driverin a normal operating position.
2,
Choose one of these options:
m For forward rotation-Move the rotation selector
IOthe left.
II For backward rotation-Move the rotation selector to the right.
Note: When the rotationselector is In center
position,the trigger switch is locked.
CAUTION:
To prevent gear damage, always allow
the chuck to come to a complete stop before
changing the bit rotation.
12
OPERATING
THE
See Figure 10.
DRILL-DRIVER
Follow these steps to operate the drill-driver_
1.
Check the rotation selector for the correct setting,,
Refer to "CHANGING THE BiT ROTATION" earlier
in this manual.
2.
Secure the workpiece in a vise or with clamps to
keep it from turning as the drltl bit rotates,
3.
Hold the drill-driver firmly and place the bit at the
point to be drilled.
4.
Depress
5.
Move the drill bit into the workpiece applying only
enough pressure to keep the bit cutting.
the trigger switch to star the drill-driver.
Note; Do not force the drill-driveror apply side
pressure to elongate a hole. Let the drill-driver and
bit do the work,
WARNING:
Be prepared for binding or bit
breakthrough. When these situations occur, the
drill-driver has a tendency to grab and kick in the
opposite direction of the rotation and could cause
loss of control when breaking through material. If
you are not prepared, this loss of control can result
in serious injury.
Fig 10
Observe these practices when drilling;
Ha When drilling hard, smooth surfaces, use a center
punch to mark the desired hole location. This action
prevents the bit from slipping off center as you start
the hole. Operate the drill-driver at a low speed until
the hole is started,
II
When drilling metals, use a light oil on the bit to
keep it from overheattng_ The oil will prolong the life
of the bit and increase the drilling actiom
HI
tt the bit jams In the workpiece or if the drill.driver
stalls, release the trigger switch immediately,
Remove the bit from the workpieee and determine
the reason for jamming.
13
_lh
BA'n'ERY
WARNING;
When servicing, use.only identical
Craftsman replacement parts, Use of any other
part may create a hazard or cause product
damage.
DISPOSAL
To preserve natural resources, please recycle or
dispose of the battery properly. Local, state_ or federai
laws may prohlb|t disposal of Nickel-Cadmium
batteries in ordinary trash.
GENERAL
Consultyour local waste authority for information
regarding available recyclingand/or disposal options,
For more informationon battery recycling call
1-800-8BATTERY_
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts are
an importantpart of the double insulationsystem and
should be serviced only by a qualified Sears service
technician,
Avoid using solvents when cleaning plastic parts_Most
plasticsare susceptible to damage from various types of
commercial solventsand may be damaged by their use,
Use clean clothsto remove dirt, carbon dust, etc_
WARNING'
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, sic° come in contact with plastic parts, They
contain chemicals that can damage, weaken, or
destroy plastic°
WARNING: Do not attempt to disassemble the
battery pack, Fire or injury can result.
WARNING: Upon removal, cover the battery
pack'sterminals with heavy duty adhesive tape Do
not attempt to destroy or disassemble battery pack
or remove any of its eomponents_Also, never
touch both terminals with metal objects and/or
body parts, as short circuit can resutL Keep away
from children. Failure to complywith these
warnings could result in fire and/or serious injury
BA'i-rERIES
Your tool is equipped with Nickel-Cadmium
rechargeab]e batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble-free life. However, like all batteries,
they will eventually wear out. DO NOT disassemble
battery pack and attempt to replace the batteries.
Handling of these batteries, especially when weartng
rings and jewelry, could result in serious burn.
To obtain the longest
the following:
possible battery life, we suggest
I!
Store and charge the batteries In a cool area.
Temperatures
above or below normal room
temperature wil! shorten battery life
if
Never store batteries in a discharged condition.
Wait for battery to coot and charge immediately.
!11 All batteries gradually lose their charge° The higher
the temperature, the quicker they lose their charge.
if you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life
14
The following
recommended
accessories
are currently available
ii
6-Pc, Extra Length Magnita
II
30-Pc. Power Screwdriver/Nutdriver
Set and Case
=
17-Pc. Power ScrewdrlverlNutdriver
Set and Case
II
High Speed Bits (For Wood or Metal), 314 in. Max,,
II
Keyless Chuck
WARNING:
at Sears retail stores.
Power Bit Set
The use of attachments
or accessories
not listed might be hazardous,
15
,,,,,,,,,
i
iiill
•
_
I
I
i, _II_L,L
I IIIIIIII1'1'
I IIIIHIIIIIIIIII
m,,
,,,,,,,,,
if
iiiiiiiii
...................
i iiiiii
, ,i,, ,,,
i
.............
J
,
_
,,
,, ,,,,,,,,,,,,,
I I I IIIIIIIllllll
,
i,,,i,,,,,,
i ill
i
,,,lllllllll
I
I
, ,
INI
,,,,,,,,,
I III IIIIIIII n I
n,
m
II
I
I
I
16
•
............
--
..........
CRAFTSMAN
m
i
DRILL-DRIVER-
MODEL
i
NUMBER
i
973.114250
i
-
..
._,i
I
The modeJ number is on a plate attached to the motor housing_ Always mention the model number in all
|
|
correspondence
I
regarding you|: DRILL-DRIVER
SEE BACK
PAGE
or when ordering repair parts,
FOR PARTS
ORDERING
INSTRUCTIONS
2
3
4
PARTS LIST
Key
No,
Pad
Noo
Description
1
616478-003
Chuck Screw .......................................................................................................... 1
2
6903302
Chuck ..............................................................................................................................
1
Qty,
3
967216-007
Wrist Strap .................................................................................................
1
4
1311444
Batten/Pack
1
5
98203t-001
Charger w{th Charging Stand ('Item No, 9-11005) .........................................1
6
982t49-001
Carwtng Case (Not shown)
983000-092
Operator's
(*Item No, 9.-11004) ...............................................................
Manua!
....................................................................................
1
Your
Home
For repair-in
your home-of
all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME
Call anytime,
®
(1.800.469.4663)
day or night (U.S.A.
www, sears,com
Our
and Canada)
www.sears.ca
Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1-800-488-1222
Call anytime,
day or night (U.S.A.
only)
w_'w.ssars.corlrl
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced
1-800-827-6655
(U.S.A.)
1-800-361-6665
by Sears:
(Canada)
Para pedir servicio de reparacibn
a domicilio, y para ordenar piezas:
1-888-SU-HOGAR
_
(1-888-784-6427)
® R_gia_racl Trademark t TMTrademark I _ S_rvlce Mark of Seats, Roebuck and Co,
® Ma_a Reglslrada / _ M_rca de F_bt_ca I u_ Marca _e So_l_lO do S_a_, Roebuck _nd Co.
_ Marque Oo commorce / _D Marque d_pos_ do Sgam, R_ebuck and Co.
© Seam, R_ebuck and Co.
Download PDF