RocketM_Ti_DS.pdf

Datasheet
Powerful 2x2 MIMO airMAX™ BaseStation
Models: RM2-Ti, RM5-Ti
Rugged Weatherproof Die-Cast Aluminum Enclosure
High Throughput Gigabit Ethernet Port
Incredible 50+ km Range and 150+ Mbps Speed
Datasheet
Powerful airMAX™
BaseStation Platform
Building upon our market-leading
Rocket™ series, the RocketM Titanium
features enhanced radio perfomance
and superior durability. Its carrier‑class
capabilities link distances up to
50+ km and provide breakthrough
speeds of up to 150+ Mbps. The
RocketM Titanium takes advantage
of its Gigabit Ethernet connection to
deliver high throughput for reliable
data transfers.
RocketDish with
RocketM Titanium
PtP (Point to Point)
Backhaul Link
Internet
Backbone
The RocketM Titanium enclosure
was specifically designed to
improve performance in harsh RF
environments and in extreme weather
conditions. Enclosed in aircraft-grade
aluminum, the RocketM Titanium is a
rugged, high-power, linear 2x2 MIMO
radio.
Rocket devices may be deployed
in PtP bridging or PtMP airMAX
BaseStation applications. They can
be paired with your choice of airMAX
BaseStation™ Sector or RocketDish™
antennas. This versatility gives
network architects unparalleled
flexibility and convenience.
RocketDish with
RocketM Titanium
PtMP (Point to Multi-Point)
airMAX Links
BaseStation
Sector with
RocketM
Titanium
Corporate
Building
Residence
Internet Cafe
Small Business
Outdoor
Hotspot
airMAX Technology
GPS Synchronization*
Easy Installation
Unlike standard WiFi protocol,
Ubiquiti’s Time Division Multiple
Access (TDMA) airMAX protocol
allows each client to send and receive
data using pre-designated time
slots scheduled by an intelligent AP
controller. This “time slot” method
eliminates hidden node collisions
and maximizes airtime efficiency. It
significantly improves performance
in throughput, reduces latency, and
increases scalability compared to all
other outdoor systems in its class.
RocketM5 Titanium has integrated
Ubiquiti airSync™ technology. airSync
enhances the hardware and software
of the Rocket to utilize GPS signals for
precision timing.
The RocketM Titanium and airMAX
antennas have been designed to
seamlessly work together.
• Intelligent QoS Priority is given
to voice or video for seamless
streaming.
• Scalability High capacity and
scalability.
• Long Distance Capable of
high‑speed links up to 50+ km.
• Latency Multiple features
dramatically reduce noise.
* GPS features only available on RocketM5 Titanium
www.ubnt.com/rocketm
2
ISP
Network
GPS Signal Reporting
airOS™ was upgraded to take full
advantage of the new GPS hardware in
the RocketM5 Titanium. Easily manage
and monitor GPS satellite signals.
No Co-Location Interference
Synchronized transmission among
RocketM5 Titanium Basestations
effectively eliminates co-location
interference.
External GPS Antenna
The RocketM5 Titanium includes a
weatherproof, external GPS antenna.
Installing the RocketM Titanium
on an airMAX BaseStation Sector
or RocketDish antenna requires
no special tools. You simply snap it
securely into place with the universal
Rocket mount built into the antenna.
Models
Datasheet
RocketM2 Titanium
RocketM5 Titanium
www.ubnt.com/rocketm
3
Datasheet
Software
airOS is a versatile, highly developed
Ubiquiti firmware technology. It
is exceptionally intuitive and was
designed to require no training to
operate. Behind the user interface is
a powerful firmware architecture that
enables high-performance, outdoor
multipoint networking.
•
•
•
•
•
•
•
•
Protocol Support
Channel Shifting
Spectral Width Adjustment
ACK Auto-Timing
AAP Technology
Multiple VLAN Support
DHCP Relay
Multi-Language Support
Integrated on all Ubiquiti M products,
airView provides advanced spectrum
analyzer functionality: waterfall,
waveform, and real-time spectral
views allow operators to identify noise
signatures and plan their networks to
minimize noise interference.
• Waterfall Aggregate energy over
time for each frequency.
• Waveform Aggregate energy
collected.
• Real-time Energy is shown in real
time as a function of frequency.
• Recording Automate airView to
record and report results.
airControl is a powerful and
intuitive, Web-based server network
management application that allows
operators to centrally manage entire
networks of Ubiquiti devices.
•
•
•
•
•
•
Network Map
Monitor Device Status
Mass Firmware Upgrade
Web UI Access
Manage Groups of Devices
Task Scheduling
www.ubnt.com/rocketm
4
Specifications
System Information
Processor Specs
Memory Information
RF Connections
RM2-Ti
RM5-Ti
Atheros MIPS 74KC, 550 MHz
Atheros MIPS 74KC, 550 MHz
128 MB SDRAM, 8 MB Flash
128 MB SDRAM, 8 MB Flash
2 RP-SMA (Waterproof )
2 RP-SMA (Waterproof )
1 SMA (GPS)
Datasheet
Model
Regulatory / Compliance Information
Wireless Approvals
FCC Part 15.247, IC RS210, CE
RoHS Compliance
Yes
Physical / Electrical / Environmental
Dimensions
160 x 80 x 44 mm
Weight
350 g
Enclosure Characteristics
Die-Cast Aluminum
(1) 10/100/1000 Ethernet Port
(1) 10/100 Ethernet Port
Networking Interface
Max. Power Consumption
6.5 Watts (RM2-Ti), 8.0 Watts (RM5-Ti)
Power Supply
48V, 0.5A PoE Adapter (Included)
Power Method
802.3af Compliant
ESD/EMP Protection
30KV Contact / Air for Ethernet
Operating Temperature
-30 to 75° C
Operating Humidity
5 to 95% Condensing
Shock and Vibration
ETSI300-019-1.4
Software Information
Modes
Station, Access Point, AP Repeater
Services
SNMP, DHCP, NAT
Utilities
Site Survey with Preferred SSID, Antenna Alignment Tool, Discovery Utility
Security
WEP/WPA/WPA2
QoS
802.11e / WMM Support
Statistical Reporting
Ethernet Activity, Uptime, Packet Success/Errors
LED Indicators
System LEDs
Antenna Align / Signal Strength LEDs
Power, WAN, LAN, GPS (RM5-Ti only)
Software Adjustable to Correspond to Custom Signal Strength Levels
www.ubnt.com/rocketm
5
Specifications
RocketM2 Titanium
Range Performance
50+ km (Outdoor - Antenna Dependent)
Output Power
28 dBm
TX Power Specifications
11n / airMAX
RX Power Specifications
Data Rate
Avg. TX
Tolerance
1 - 24 Mbps
28 dBm
36 Mbps
Data Rate
Sensitivity
Tolerance
± 2 dB
1 - 24 Mbps
-97 dBm min.
± 2 dB
26 dBm
± 2 dB
36 Mbps
-80 dBm
± 2 dB
48 Mbps
25 dBm
± 2 dB
48 Mbps
-77 dbm
± 2 dB
54 Mbps
24 dBm
± 2 dB
54 Mbps
-75 dBm
± 2 dB
MCS0
28 dBm
± 2 dB
MCS0
-96 dBm
± 2 dB
MCS1
28 dBm
± 2 dB
MCS1
-95 dBm
± 2 dB
MCS2
28 dBm
± 2 dB
MCS2
-92 dBm
± 2 dB
MCS3
28 dBm
± 2 dB
MCS3
-90 dBm
± 2 dB
MCS4
27 dBm
± 2 dB
MCS4
-86 dBm
± 2 dB
MCS5
25 dBm
± 2 dB
MCS5
-83 dBm
± 2 dB
MCS6
23 dBm
± 2 dB
MCS6
-77 dBm
± 2 dB
MCS7
22 dBm
± 2 dB
MCS7
-74 dBm
± 2 dB
MCS8
28 dBm
± 2 dB
MCS8
-95 dBm
± 2 dB
MCS9
28 dBm
± 2 dB
MCS9
-93 dBm
± 2 dB
MCS10
28 dBm
± 2 dB
MCS10
-90 dBm
± 2 dB
MCS11
28 dBm
± 2 dB
MCS11
-87 dBm
± 2 dB
MCS12
27 dBm
± 2 dB
MCS12
-84 dBm
± 2 dB
MCS13
25 dBm
± 2 dB
MCS13
-79 dBm
± 2 dB
MCS14
23 dBm
± 2 dB
MCS14
-78 dBm
± 2 dB
MCS15
22 dBm
± 2 dB
MCS15
-75 dBm
± 2 dB
www.ubnt.com/rocketm
Modulation
11g
11g
Modulation
6
2412 - 2462 MHz
11n / airMAX
Datasheet
Operating Frequency
Specifications
RocketM5 Titanium
5170 - 5825 MHz*
Range Performance
50+ km (Outdoor - Antenna Dependent)
Output Power
27 dBm
TX Power Specifications
Avg. TX
Tolerance
6 - 24 Mbps
27 dBm
36 Mbps
Modulation
Data Rate
Sensitivity
Tolerance
± 2 dB
6 - 24 Mbps
-94 dBm min.
± 2 dB
25 dBm
± 2 dB
36 Mbps
-80 dBm
± 2 dB
48 Mbps
23 dBm
± 2 dB
48 Mbps
-77 dbm
± 2 dB
54 Mbps
22 dBm
± 2 dB
54 Mbps
-75 dBm
± 2 dB
MCS0
27 dBm
± 2 dB
MCS0
-96 dBm
± 2 dB
MCS1
27 dBm
± 2 dB
MCS1
-95 dBm
± 2 dB
MCS2
27 dBm
± 2 dB
MCS2
-92 dBm
± 2 dB
MCS3
27 dBm
± 2 dB
MCS3
-90 dBm
± 2 dB
MCS4
26 dBm
± 2 dB
MCS4
-86 dBm
± 2 dB
MCS5
24 dBm
± 2 dB
MCS5
-83 dBm
± 2 dB
MCS6
22 dBm
± 2 dB
MCS6
-77 dBm
± 2 dB
MCS7
21 dBm
± 2 dB
MCS7
-74 dBm
± 2 dB
MCS8
27 dBm
± 2 dB
MCS8
-95 dBm
± 2 dB
MCS9
27 dBm
± 2 dB
MCS9
-93 dBm
± 2 dB
MCS10
27 dBm
± 2 dB
MCS10
-90 dBm
± 2 dB
MCS11
27 dBm
± 2 dB
MCS11
-87 dBm
± 2 dB
MCS12
26 dBm
± 2 dB
MCS12
-84 dBm
± 2 dB
MCS13
24 dBm
± 2 dB
MCS13
-79 dBm
± 2 dB
MCS14
22 dBm
± 2 dB
MCS14
-78 dBm
± 2 dB
MCS15
21 dBm
± 2 dB
MCS15
-75 dBm
± 2 dB
11a
Data Rate
11n / airMAX
11n / airMAX
11a
Modulation
RX Power Specifications
Datasheet
Operating Frequency
* Only 5725 - 5850 MHz supported in the USA
www.ubnt.com/rocketm
7
Datasheet
Protect your networks from the most
brutal environments with Ubiquiti’s
industrial-grade shielded Ethernet
cable, TOUGHCable.
Increase Performance
Dramatically improve your
Ethernet link states, speeds, and
overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof
TOUGHCables have been built to
perform even in the harshest weather
and environments.
ESD Damage Protection
Protect your networks from
devastating electrostatic discharge
(ESD) attacks.
Extended Cable Support
TOUGHCables have been developed
to increase power handling
performance for extended cable run
lengths.
Bulletproof your networks
TOUGHCable is currently available in
two versions: PRO Shielding Protection
and CARRIER Shielding Protection.
TOUGHCable Connectors
Specifically designed for use with Ubiquiti TOUGHCables and available in
100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet
hardware damage while allowing rapid field deployment without soldering.
ESD attacks are the leading cause for
device failures. The diagram below
illustrates the areas vulnerable to
ESD attacks in a network.
By using a grounded Ubiquiti Power
over Ethernet (PoE) Adapter along with
Ubiquiti TOUGHCable and TOUGHCable
Connectors, you can effectively protect
against ESD attacks.
TOUGHCable PRO is a Category 5e,
outdoor, carrier-class shielded cable
with an integrated ESD drain wire.
TOUGHCable CARRIER is a
Category 5e, outdoor, carrier-class
shielded cable that features
an integrated ESD drain wire,
anti-crosstalk divider, and secondary
shielding. It is rated to provide optimal
performance on Gigabit Ethernet
networks.
Unshielded
cable with
no ESD drain
Ubiquiti
TOUGHCable
Additional Information:
• 24 AWG copper conductor pairs
• 26 AWG integrated ESD drain wire
to prevent ESD attacks and damage
• PE outdoor-rated, weatherproof
jacket
• Multi-layered shielding
• Available in lengths of 1000 ft
(304.8 m)
PoE adapter with
no earth ground
Ubiquiti
PoE Adapter
TERMS OF USE: The Ubiquiti radio device must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. It is the installer’s responsibility to follow
local country regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
For further information, please visit www.ubnt.com.
All specifications in this document are subject to change without notice.
© 2012 Ubiquiti Networks, Inc. All rights reserved.
8
www.ubnt.com