LED Raceway Strand Distributed Dimming
Strand Distributed Dimming
LED Raceway
S21 LED Raceway
(Fixtures and accessories are sold separately and shown for illustrative purposes only)
Strand Lighting is pleased to introduce the next generation of our popular S21 Dimmer Strips the S21 LED raceway; a perfect
extension of our R21, C21, and A21 range of installed dimmer cabinets. These modular raceways are assembled to order with your
choice of any combination of 3 power modules.
Our IGBT dimmer module features an Insulated Gate Bipolar Transistor power device that works in tandem with a dedicated
microprocessor to control almost any type of lighting load required. Our new relay module features two switched circuits each with
a DMX output designed to power our PL1 and PL3 LED luminaires or the new VARI❋LITE VLX wash family of LED automated
sources. Each relay can be individually controlled to “Power down” your rig when it is not in use. Our new quad LED driver module
can be used to control and power our PL Wash or Color Kinetics Color Blast luminaires.
S21 LED is designed to deliver control and power to your rig of conventional and LED sources as an easy to use and set up solution
to the challenge of delivering power and control to a wide range of sources.
Features
●
Available to order with any combination of IGBT dual
dimmer, dual relay, or Quad LED power supply modules
●
DMX512 I/O
●
Choice of 3 power input locations - top, bottom and back
●
Wide range of load connector options on power modules
●
Simple set up with back lit LCD display and easy button
access. LCD blacks out when not in use. Full configuration
and set up for low voltage LED luminaires from Selecon and
Color Kinetics.
●
Quiet, convection cooled operation
●
Hangers available for wall and pipe mount applications
●
ETL, cETL listed
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
S21 LED Raceway
Strand Distributed Dimming
S21 LED Raceway Components & Features
LCD Display and Menu System
Dual, IGBT Dimmer Modules
The Processor’s LCD Display and Menu System provides local control
for accessing all system status information and for making
configuration changes to the particular dimmer strip. User-defined
operational selections and dimmer strip status includes:
Each S21 LED Raceway Dimmer Module contains one dual 2.4kW
IGBT dimmer with power (2.4kW) shared between the two dimmers
within the module. Each dual dimmer module includes:
•
Fully Digital Dimmer operation with Forward and Reverse phase
dimming (automatic or user-selectable)
•
Compatible with new LED drivers that require reverse phase
operation
•
Quiet convection cooled dual IGBT dimmers
•
No dimmer room required and no added cooling needed
•
Energy efficient - only a 2.5 volt insertion loss
•
Solid-state dimming technology with adjustable transition (rise)
time up to 1000 ms for quiet operation
•
Low Harm mode to reduce neutral harmonics
Adjust dimmer transition times to optimize performance. Auto
mode is available to insure the best performance under all
conditions.
•
Automatic Overload and Short Circuit protection
•
Wide range of load connector options
•
Operational voltage selections (per dimmer) to prolong lamp life
•
Local Focus buttons and LED status indicators
•
A selection of 13 different dimming curves - each dimmer can
be set to its own dimming curve as desired
Quad, LED Luminaire Power Supply
•
Optional password protection to lock menu (to prevent unwanted
changes)
•
S21 LED strip start address for dimmer and relay modules and
auto address for LED luminaires
•
Simple ID and addressing for LED luminaires including 8/16 bit
operation, luminaire reset, White, RGB and RGBAW address
offsets. Address review for user console patching.
•
•
•
Raceway and individual dimmer status reporting (including
dimmer levels, connected loads, operational modes, error
reporting, dimmer operating temperatures, voltages, and more)
Dimming mode selections (per dimmer) for Forward Phase
Control, Reverse Phase Control, dedicated line-voltage LED
dimming, and non-dim
LCD Display & Menu
Our LED power supply is designed to deliver power and data to any
Selecon PL Wash luminaire or Color Kinetics Blast. Easy to set up
and configure users will never need a special programming tool to
address a fixture again. Our auto ID system displays what luminaire
type is connected and allows each user to set up their system quickly
and easily.
•
Control connectors for 4 low voltage PL Wash or Color Kinetics
Color Blast luminaires
•
Auto ID to simplify patching
•
No luminaire addressing required
•
Copy command to speed set up.
•
Processor set up for 8 and 16-bit fade operation
•
Local focus button with push and hold configuration for white,
RGB and RGBAW luminaires
LCD Display & Menu Detail
Dual, Relay Modules
Escape
MAIN MENU
Dimmer
System
Dimmer
Dimmer
System
Start Address
Status
Status
Options
Configuration
Enter
Each S21 LED Raceway relay module contains two relays designed to
connect a total load of 20 amps.
•
High performance mechanical relays for years of reliable
operation
•
Addressable DMX control of each of two relays per module
•
Choice of load connectors each with an adjacent DMX512
output connector
S21 LED Raceway
Strand Distributed Dimming
S21 LED Raceway Mounting Hardware
Pipe Mount Bracket (71725)
Wall Mount Bracket (71727)
"C" Style Clamp or Cheeseboro
Clamp mounting hole
Wall Mount Holes
Raceway
mounting holes
The 71725 Pipe Mount Bracket is
designed to mount to a S21 LED
Raceway and to allow installation of
“C” Style Mounting Clamps (SC) or
71351 Cheeseboro Clamps (each
sold separately) for truss or pipe
hanging applications. Note, two Pipe
Mount Brackets are required to
mount an S21 LED Raceway.
Single Pipe Mount
Hanging Bracket (71730)
Raceway
mounting holes
The 71727 Wall Mount Bracket is
used to permanently mount the S21
LED Raceway to a wall. Note, two
wall Mount Brackets are required to
mount a S21 LED Raceway.
Wall Mount Holes
Double Pipe Mount
Hanging Bracket (71731)
Rigging (mounting)
point for bracket
Rigging (mounting)
point for bracket
U-Bolt clamp for
mounting a pipe
(above raceway)
Raceway
mounting holes
U-Bolt clamp for
mounting a single pipe
The 71730 Single Pipe Mount
Hanging Bracket is designed to
mount to a S21 LED Raceway and to
allow a single 1-1/2" (Schedule 40)
pipe to be hung underneath. Note, At
least two Pipe Mount Brackets are
required to mount a S21 LED
Raceway (or as required by code).
"C" Style Clamp (SC)
Raceway
mounting holes
U-Bolt clamp for
mounting a pipe
(below raceway)
Dual Clamp Mount
Hanging Bracket (71510)
The SC “C” Style Mounting Clamp is used to
mount S21 LED Raceways beneath a 1½”
schedule 40 pipe or a 2” aluminum tube
(truss). Each “C” Style Clamp installs on a
71725 Pipe Mount bracket (sold separately)
and allows S21 LED Raceways to be quickly
relocated. Note, two “C” Style Clamps are
required to mount an S21 LED Raceway.
Cheeseboro clamp (71351)
for mounting to a single pipe
Raceway
mounting holes
Cheeseboro Style Clamp (71351)
The 71351 Cheeseboro Style Mounting Clamp is
used to mount an S21 LED Raceway above
either a 1½” schedule 40 pipe or a 2”
aluminum tube (truss). Each Cheeseboro Clamp
installs on a 71725 Pipe Mount bracket (sold
separately) and allows S21 LED Raceways to be
quickly relocated. Note, two Cheeseboro Style
Mounting Clamps are required for each S21 LED
Raceway.
The 71731 Double Pipe Mount
Hanging Bracket is designed to
mount to a S21 LED Raceway and to
allow two 1-1/2" (Schedule 40)
pipes to be hung underneath and
over the raceway. Note, At least two
Pipe Mount Brackets are required to
mount a S21 LED Raceway (or as
required by code).
Cheeseboro clamp (71351)
for mounting to a single pipe
3-3/16"
~ 2-0"
The 71510 Dual Clamp Mount
Hanging Bracket is supplied with two
71351 clamps and is designed to
mount to a S21 LED Raceway and to
allow a single 1-1/2" (Schedule 40)
pipe to be hung underneath. Note, At
least two Dual Clamp Mount
Brackets are required to mount a
S21 LED Raceway (or as required by
code).
S21 LED Raceway
Strand Distributed Dimming
Ordering Information
Cat No.
Description
S21 LED Raceway
S21 LED Raceway Accessories
71800 - XX - YY - ZZ
Input Power Cables
XX = Module 1 - YY = Module 2 - ZZ = Module 3
71432
Choose any combination of module options below for each module
position and Strand Lighting will construct the S21 LED Raceway to
your specification.
71436
S21 LED Raceway Module Options
71438
DS
DT
DE
DP
RS
RT
RE
RP
CC
BK
Dimmer module with Stage Pin connectors
Dimmer module with Twist Lock connectors
Dimmer module with Edison connectors
Dimmer module with Powercon connectors
Relay module with Stage Pin/DMX connectors
Relay module with Twist Lock/DMX connectors
Relay module with Edison/DMX connectors
Relay module with Powercon/DMX connectors
Low Voltage LED module
Blank panel - no power, no connectors
Example Configuration:
S21 LED Raceway Product Number: 71800-CC-RS-CC
This configuration has two modules for driving LED luminaires (CC
modules) and one relay module for PL1 or PL3 luminaires (RS
module).
71437
6 ft AWG #10/5 power input cable with L21-20P GTL
plug for field installation
6 ft AWG #10/5 power extension cable with L21-20P
GTL plugs
8 ft AWG #10/5 power extension cable with L21-20P
GTL plugs
12 ft AWG #10/5 power extension cable with L21-20P
GTL plugs
Clamps / Mounting / Hangers / DMX Termination
SC
71351
71725
71727
71730
71731
71510
71346
Pipe Clamp
Cheeseboro Clamp
Pipe Mount Bracket (for use with Cheeseboro or
Pipe Clamps)
Wall Mount Bracket
Single Pipe Mount Hanging Bracket
Double Pipe Mount Hanging Bracket
Dual Clamp Mount Hanging Bracket (includes 2 each
71351)
DMX512 Terminator
Spare Processor
71701
Spare Processor / LCD Display Unit
(230V Models)
Technical Information
(120V Models)
C
Number of Modules:
3 modules - as per customer order
Frequency:
50/60Hz
Dimmer Module Output:
100 / 110 / 115 / 120 VAC (user
selectable)
Ambient Temperature:
0 to 40 degrees C
Humidity:
5%-95% Non condensing
Minimum Load:
1 watt
Cooling:
Natural Convection
Maximum Load per Dimmer: 2.4kW per Dimmer Module (max.)
Height:
6.0 in. (152.4 mm)
Forward or Reverse (user selectable
or automatic)
Depth:
4.0 in. (101.6 mm)
Transition (Rise) Time:
Up to 1000 ms (automatic
adjustable)
Length:
72.0 in. (1,828.8 mm)
Weight:
Depends on modules ordered
Insert Loss:
Max 2.5 volts
Load Connector Types:
Power Feed:
3-phase 4 wire 120/208 volts 20
amps; Terminal block or optional
input power cables available
As per module options:
GP – Grounded Stage Pin
GTL – Twistlock
GR – Edison NEMA 5-20R
Dimming Phase:
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: (214) 647-7880
Fax: (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: (212) 213-8219
Fax: (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Room 6-10,
20/F Delta House
3 On Yiu Street
Shatin, N.T. Hong Kong
Tel: + 852-2757-3033
Fax: + 852-2757-1767
051111_NA
www.strandlighting.com
© Philips Group 2011
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Marssteden 152
Enschede 7547 TD
the Netherlands
Tel: +31-53-4500424
Fax: +31-53-4500425
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement