Mitsubishi | MS-A12WA-1 | Operating instructions | Mitsubishi MS-A12WA-1 Operating instructions

SPLIT-TYPE AIR CONDITIONERS
INDOOR UNIT
MS-A09WA-1 MS-A12WA-1
MSY-A15NA-1 MSY-A17NA-1
OPERATING INSTRUCTIONS
For user
• To use this unit correctly and safely, be sure to read this operating instructions before use.
English
MANUAL DE INSTRUCCIONES
SG79Y951H01_EN.indd 1
4/9/07 4:19:02 PM
• OPERATING INSTRUCTIONS •
CONTENTS
■
■
■
■
■
■
■
■
■
■
■
■
■
SAFETY PRECAUTIONS
NAME OF EACH PART
PREPARATION BEFORE OPERATION
SELECTING OPERATION MODES
FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
ECONO COOL OPERATION
POWERFUL COOL OPERATION
TIMER OPERATION (ON/OFF TIMER)
CLEANING
WHEN YOU THINK THAT TROUBLE HAS OCCURRED
WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME
INSTALLATION PLACE AND ELECTRICAL WORK
SPECIFICATIONS
1
3
4
5
6
6
6
7
8
9
10
10
10
SAFETY PRECAUTIONS
• Since rotating parts and parts which could cause an electric shock are used
in this product, be sure to read these “Safety Precautions” before use.
• Since the cautionary items shown here are important for safety, be sure to
observe them.
• After reading this manual, keep it together with the installation manual in a
handy place for easy reference.
Marks and their meanings
WARNING :
Incorrect handling could cause serious hazard, such as
death, serious injury, etc. with a high probability.
CAUTION :
Incorrect handling could cause serious hazard depending
on the conditions.
Meanings of symbols used in this manual
: Be sure not to do.
: Be sure to follow the instruction.
: Never insert your finger or stick, etc.
: Never step onto the indoor/outdoor unit and do not put anything on them.
: Danger of electric shock. Be careful.
: Be sure to disconnect the power supply plug from the power outlet.
: Be sure to shut off the power.
WARNING
Do not connect the power cord to an intermediate
point, use an extension cord, or connect multiple
devices to a single AC outlet.
• This may cause overheating, fire, or electric shock.
In case of an abnormal condition (such as a burning smell), stop the air conditioner and disconnect
the power plug or turn the breaker OFF.
• A continued operation in the abnormal state may cause a
malfunction, fire, or electric shock. In this case, consult your
dealer.
Do not bundle, pull, or modify the power cord, and
do not apply heat or place heavy objects on it.
• This may cause fire or electric shock.
When the air conditioner does not cool or heat,
there is a possibility of refrigerant leakage. In this
case, consult your dealer. If a repair involves recharging the unit with refrigerant, ask the service
technician for details.
• The refrigerant used in the air conditioner is safe. Normally,
it does not leak. However, if refrigerant leaks and comes in
contact with a heat source such as a fan heater, kerosene
heater, or cooking stove, it will create a harmful gas.
Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.
• This may create sparks, which can cause fire.
• After the indoor unit is switched OFF with the remote controller, make sure to turn the breaker OFF or disconnect the
power plug.
Do not touch the air inlet or the aluminum fins of
the indoor/outdoor unit.
• This may cause injury.
Make sure the power plug is free of dirt and insert
it securely into the outlet.
• A dirty plug may cause fire or electric shock.
Do not expose your body directly to cool air for a
prolonged length of time.
• This could be detrimental to your health.
The unit should not be installed, relocated, or
repaired by the user.
• An improperly handled air conditioner may cause fire or
electric shock.
Do not insert your finger, a stick, or other objects
into the air inlet or outlet.
• This may cause injury, since the fan inside rotates at high
speeds during operation.
CAUTION
Do not use insecticides or flammable sprays on
the unit.
• This may cause a fire or deformation of the unit.
Do not expose pets or houseplants to direct airflow.
• This may cause injury to the pets or plants.
Do not place other electric appliances or furniture
under the indoor/outdoor unit.
• Water may drip down from the unit, which may cause damage or malfunction.
Do not leave the unit on a damaged installation stand.
• The unit may fall and cause injury.
En-1
SG79Y951H01_EN.indd 1
4/9/07 4:19:14 PM
SAFETY PRECAUTIONS
CAUTION
Do not step on an unstable bench to operate or
clean the unit.
• This may cause injury if you fall down.
Do not pull the power cord.
• This may cause a portion of the core wire to break, which
may cause overheating or fire.
Do not charge or disassemble the batteries, and
do not throw them into a fire.
• This may cause the batteries to leak, or cause a fire or explosion.
Do not operate the unit for a long time at high
humidity (80% RH or more), such as with a door or
window left open.
• The water condensation in the air conditioner may drip down,
wetting or damaging the furniture.
Do not operate switches with wet hands.
• This may cause electric shock.
Do not clean the air conditioner with water or place
an object that contains water, such as a flower
vase, on it.
• This may cause fire or electric shock.
Do not step on or place any object on the outdoor
unit.
• This may cause injury if you or the object falls down.
For installation
WARNING
Do not use the unit for special purposes, such as
storing food, raising animals, growing plants, or
preserving precision devices or art objects.
• This may cause deterioration of quality, or harm to animals
and plants.
Consult your dealer for installing the air conditioner.
• It should not be installed by the user since installation requires
specialized knowledge and skills. An improperly installed
air conditioner may cause water leakage, fire, or electric
shock.
Do not expose combustion appliances to direct
airflow.
• This may cause incomplete combustion.
Provide a dedicated power supply for the air conditioner.
• A non-dedicated power supply may cause overheating or
fire.
Before cleaning the unit, switch it OFF and disconnect the power plug or turn the breaker OFF.
• This may cause injury, since the fan inside rotates at high
speeds during operation.
Do not install the unit where flammable gas could leak.
• If gas leaks and accumulates around the unit, it may cause
an explosion.
When the unit will be unused for a long time, disconnect the power plug or turn the breaker OFF.
• The unit may accumulate dirt, which may cause overheating
or fire.
Replace all batteries of the remote controller with
new ones of the same type.
• Using an old battery together with a new one may cause
overheating, leakage, or explosion.
If the battery fluid comes in contact with your skin or
clothes, wash them thoroughly with clean water.
• If the battery fluid comes in contact with your eyes, wash them
thoroughly with clean water and immediately seek medical
attention.
Ensure that the area is well-ventilated when the unit
is operated together with a combustion appliance.
• Inadequate ventilation may cause oxygen starvation.
Ground the unit correctly.
• Do not connect the ground wire to a gas pipe, water pipe,
lightning rod, or a telephone ground wire. Improper grounding
may cause electric shock.
CAUTION
Install a Ground Fault Interrupt (GFI) circuit breaker
depending on the installation location of the air
conditioner (such as highly humid areas).
• If the Ground Fault Interrupt (GFI) breaker is not installed, it
may cause electric shock.
Ensure that the drain water is properly drained.
• If the drain passage is improper, water may drip down from
the indoor/outdoor unit, wetting and damaging the furniture.
In case of an abnormal condition
Immediately stop operating the air conditioner and consult your dealer.
Turn the breaker OFF when you hear thunder and
there is a possibility of a lightning strike.
• The unit may be damaged if lightning strikes.
After the air conditioner is used for several seasons, perform inspection and maintenance in addition to normal cleaning.
• Dirt or dust in the unit may create an unpleasant odor or clog
the drain passage, and cause water to leak from the indoor
unit. Consult your dealer for inspection and maintenance,
which require specialized knowledge and skills.
En-2
SG79Y951H01_EN.indd 2
4/9/07 4:19:21 PM
• OPERATING INSTRUCTIONS •
NAME OF EACH PART
Indoor unit
Remote controller
Signal transmitting section
Distance of signal :
About 20ft (6 m)
Beep(s) is (are) heard
from the indoor unit
when the signal is
received.
Air cleaning filter
(Anti-Allergy Enzyme Filter)
Heat exchanger
Air inlet
Front panel
Air filter
(Catechin air
filter)
Emergency
operation
switch Page 5
Air outlet
Vertical
vane
Horizontal
vane
Fan
Operation display
section
ON/OFF
(operate/stop)
button
Temperature buttons
Page 5
Operation
select button
FAN speed control
button Page 6
Off-timer button Page 7
Page 5
Display section
ECONO COOL
button Page 6
Operation
indicator lamp
Remote control
receiving section
Outdoor unit
Air inlet (back and side)
On-timer button Page 7
VANE
control button
TIME set buttons
Pages 4, 7
Page 6
Increase time
Decrease time
POWERFUL
COOL button
Page 6
CLOCK button Page 4
RESET button Page 4
Lid
Slide down to open
Remote controller
holder
Piping
Drainage hose
Air outlet
Drain outlet
Appearance of the outdoor unit may differ from some models.
• Install the remote controller
holder to a place where the
signal can be received by
the indoor unit.
Use the remote controller provided with the unit only.
Do not use other remote controllers.
En-3
SG79Y951H01_EN.indd 3
4/9/07 4:19:28 PM
PREPARATION BEFORE OPERATION
Before operation: Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
1.
Remove the front lid
RE
SE
T
CL
K
OC
2.
3.
•
•
•
•
•
Insert AAA
alkaline batteries
Install the front lid
Make sure the polarity of the batteries is correct.
Do not use manganese batteries. The remote controller could malfunction.
Do not use rechargeable batteries.
Replace all batteries with new ones of the same type.
Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
Setting current time
1.
Press RESET
2.
Press CLOCK
T
SE
RE
K
OC
CL
3.
4.
Press CLOCK again
Press the TIME buttons to set the
time
Each press increases/decreases
time by 1 minute (10 minutes
when pressed longer)
• Press RESET and CLOCK gently using a thin stick.
If the RESET button is not pressed, the remote
controller may not operate correctly.
Changing temperature units (ºF/ºC)
The preset unit is ºF.
1.
Press RESET while
the temperature buttons are pressed.
• Press RESET gently using a thin stick.
En-4
SG79Y951H01_EN.indd 4
4/9/07 4:19:37 PM
• OPERATING INSTRUCTIONS •
SELECTING OPERATION MODES
I FEEL mode
The unit selects the operation mode according to the room temperature
when AUTO is selected. When the room temperature is higher than 77°F
(25°C), COOL is selected (set temperature: 75°F [24°C]). When the room
temperature is lower than 77°F (25°C), DRY is selected. However, when
operation is stopped and then started within 2 hours, the mode which has
been selected previously is operated.
Note:
During COOL operation, the set temperature may not be changed when
the room temperature is more than 4°F (2°C) higher than the set temperature. In this case, please wait until the room temperature drops to within
4°F (2°C) of the set temperature.
COOL mode
Enjoy cool air at your desired temperature.
Do not operate COOL mode at low outside temperature
(less than 14°F [-10°C]).
Water condensed in the unit may drip and wet or damage furniture, etc.
DRY mode
1
2
Dehumidify your room. The room may be cooled slightly.
Temperature cannot be set during DRY mode.
Press
to start the operation.
FAN mode
Circulate the air in your room.
Press
to select operation mode. Each press
changes mode in the following order:
Emergency operation
(I FEEL)
When the remote controller cannot be used...
(COOL)
Emergency operation can be activated by pressing the emergency operation
switch (E.O.SW) on the indoor unit.
(DRY)
E.O.
SW
(FAN)
3
WASH
reset
Press
or
to set the temperature.
Each press raises or lowers the temperature by 1°F
(1°C).
Each time the E.O.SW is pressed, the operation
changes in the following order:
Operation indicator lamp
Emergency COOL
Press
to stop the operation.
• The same setting is selected the next time by simply pressing
Operation indicator lamp
The operation indicator lamp shows the operation state of the unit.
Indication
Operation state
Room temperature
The unit is operating to reach the set About 4°F (2°C) or
more away from set
temperature
temperature
The room temperature is approach- About 2 to 4°F (1 to
2°C) from set teming the set temperature
perature
Lighted
Not lighted
.
Set temperature : 75°F
(24°C)
Fan speed : Medium
Horizontal vane : Auto
Stop
Note:
The first 30 minutes of operation is test run. Temperature
control does not work, and fan speed is set to High.
Auto restart function
If a power failure occurs or the main power is turned off during operation, “Auto
restart function” automatically starts operation in the same mode as the one
set with the remote controller just before the shutoff of the main power.
When timer is set, timer setting is cancelled and the unit starts operation when
power is resumed.
If you do not want to use this function, please consult the service representative because the setting of the unit needs to be
changed.
En-5
SG79Y951H01_EN.indd 5
4/9/07 4:19:55 PM
FAN SPEED AND
AIRFLOW DIRECTION ADJUSTMENT
Press
to select fan speed. Each press changes
fan speed in the following order:
(AUTO)
(Low)
(Med.)
(High)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press
to select airflow direction. Each press
changes airflow direction in the following order:
ECONO COOL OPERATION
Press
during COOL mode page 5 to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 4°F (2°C) higher
automatically.
Press
• Pressing
again to cancel ECONO COOL operation.
or
also cancels ECONO COOL operation.
What is “ECONO COOL”?
(AUTO)
(1)
(2)
(3)
(4)
(SWING)
• Two short beeps are heard from the indoor unit when set to AUTO.
• Press for 2 seconds or more to set to horizontal position.
• Press once to cancel horizontal position.
• When the airflow direction is set to horizontal position, or when horizontal position is cancelled, operation stops for about 3 minutes.
Airflow direction
(AUTO) .........The vane is set to the most efficient airflow direction: horizontal
position.
(Manual) .......For efficient air conditioning, select upper position for COOL/
DRY. During COOL/DRY, vane automatically moves to position
(1) after around 1 hour to prevent water dripping.
(Swing) .........The vane moves up and down intermittently.
Horizontal position
Recommended position during COOL/DRY. Air does not
blow directly to room occupants, providing comfortable airflow
distribution.
■ To change the horizontal airflow direction.
Swing air flow (change of air flow) makes you feel cooler than constant air flow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
POWERFUL COOL OPERATION
Press
during COOL mode page 5 to start
POWERFUL COOL operation.
Fan speed
: POWERFUL-high (exclusive speed for POWERFUL
mode)
Horizontal vane : Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
Press
operation.
again to cancel POWERFUL COOL
• POWERFUL COOL operation is cancelled automatically in 15 minutes.
• POWERFUL COOL operation is cancelled when the following buttons
are pressed:
ON/OFF button, FAN button, ECONO COOL button
Move the vertical vane manually before starting operation.
En-6
SG79Y951H01_EN.indd 6
4/9/07 4:20:15 PM
• OPERATING INSTRUCTIONS •
TIMER OPERATION (ON/OFF TIMER)
1
Press
or
during operation to set the timer.
(ON timer) : The unit will turn ON at the set time.
(OFF timer) : The unit will turn OFF at the set
time.
*
or
blinks.
* Make sure that the current time is set correctly. Page 4
2
Press
(Increase) and
time of timer.
(Decrease) to set the
Each press increases or decreases the set time by 10 minutes.
Press
or
again to cancel timer.
Note:
• ON and OFF timers can be used in combination. mark indicates the order
of timer operations.
• If power failure occurs while ON/OFF timer is set, see page 5 “Auto restart
function”
En-7
SG79Y951H01_EN.indd 7
4/9/07 4:20:37 PM
CLEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or flames to dry.
• Do not use water hotter than 120°F (50°C).
Air cleaning filter
(Anti-Allergy Enzyme Filter)
Back side of left air filter
• Clean every 3 months.
• Soak the filter together with its frame in lukewarm water and wash it.
• After washing, dry it well in shade and put it back to its original position.
Install all tabs of the air filter.
• Replace it with a new air cleaning
filter every year for best performance.
• Parts Number MAC-415FT-E
Pull to remove from the air filter
Front panel
Air filter (Catechin air filter)
• Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or wash with water.
• Dry it well in shade before installing it.
Hinge
Hole
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the above illustration.
• Wipe with a soft dry cloth or wash it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the panel by following the removal
procedure in reverse. Close the front panel
securely and press the positions indicated
by the arrows.
What is “Catechin air filter” ?
Catechin is a bioflavonoid that is found in green tea that has both antiviral and antioxidant qualities. In addition to these benefits, Catechin also
offers excellent deodorizing characteristics. Catechin air filter uses this
compound to not only improve air quality but also prevent the spread of
bacteria and viruses in the room.
Note:
Clean the filters regularly for best performance and to reduce power
consumption.
En-8
SG79Y951H01_EN.indd 8
4/9/07 4:20:47 PM
• OPERATING INSTRUCTIONS •
WHEN YOU THINK THAT TROUBLE HAS OCCURRED
Even if these items are checked, when the unit does not recover from
the trouble, stop using the air conditioner and consult your dealer.
Symptom
Explanation & Check points
Indoor Unit
The unit cannot be operated.
• Is the breaker turned on?
• Is the power supply plug connected?
• Is the ON timer set? Page 7
The horizontal vane does not
move.
• Is the horizontal vane installed correctly?
• Is the fan guard deformed?
The unit cannot be operated
for about 3 minutes when
restarted.
• This protects the unit according to instructions from the microprocessor. Please
wait.
The fan stops during the DRY
operation.
• In DRY operation, the unit operates using the
same refrigerant circuit as in COOL operation. DRY operation time has to be reduced
in order to lower humidity without much room
temperature decreasing. So the compressor sometimes stops, and at the same time
the indoor fan stops. This prevents water
condensed on the heat exchanger from
evaporating again.
Mist is discharged from the air • The cool air from the unit rapidly cools moisoutlet of the indoor unit.
ture in the air inside the room, and it turns
into mist.
The swing operation of the
HORIZONTAL VANE is
suspended for a while, then
restarted.
• This is for the swing operation of the HORIZONTAL VANE to be performed normally.
The air flow direction changes • When the unit is operated in COOL or DRY
during operation.
mode, if the operation continues with air
The direction of the horizontal
blowing down for around 1 hour, the direction
vane cannot be adjusted with
of the air flow is automatically set to position
the remote controller.
(1) to prevent water from condensing and
dripping.
The unit starts operation by
itself when the main power
is turned on, though it isn’t
operated with the remote
controller.
• These models are equipped with an auto restart function. When the main power is turned
off without stopping the unit with the remote
controller and is turned on again, the unit
starts operation automatically in the same
mode as the one set with the remote controller just before the shut off of the main power.
Refer to “Auto restart function” page 5 .
Outdoor Unit
Water leaks from the outdoor
unit.
• During COOL and DRY operations, pipe or
pipe connecting sections are cooled and this
causes water to condense.
• When the outside temperature is low durThe fan of the outdoor unit
does not rotate even though
ing cooling operation, the fan operates
the compressor is running.
intermittently to maintain sufficient cooling
Even if the fan starts to rotate,
capacity.
it stops soon.
Symptom
Explanation & Check points
Remote controller
The display on the remote
controller does not appear
or it is dim. The indoor unit
does not respond to the
remote control signal.
• Are the batteries exhausted? Page 4
• Is the polarity (+, -) of the batteries correct?
Page 4
• Are any buttons on the remote controller of
other electric appliances being pressed?
Does not cool
The room cannot be cooled
sufficiently.
• Is the temperature setting appropriate?
Page 5
• Is the fan setting appropriate? Please
change fan speed to higher setting.
Page 6
• Are the filters clean? Page 8
• Is the fan or heat exchanger of the indoor unit
clean?
• Are there any obstacles blocking the air inlet
or outlet of the indoor or outdoor unit?
• Is a window or door open?
• When a ventilation fan or a gas cooker is
used in a room, the cooling load increases,
resulting in an insufficient cooling effect.
• When the outside temperature is high, the
cooling effect may not be sufficient.
Airflow
The air from the indoor unit
smells strange.
• Are the filters clean? Page 8
• Is the fan or heat exchanger of the indoor unit
clean?
• The unit may suck in an odor adhering to the
wall, carpet, furniture, cloth, etc. and blow it
out with the air.
Sound
Cracking sound is heard.
• This sound is generated by the expansion/
contraction of the front panel, etc. due to
change in temperature.
The sound as burbling is
heard.
• This sound is heard when the outside air is
absorbed from the drain hose by turning on
the range hood or the ventilation fan, making
water flowing in the drain hose to spout out.
This sound is also heard when the outside air
blows into the drain hose in case the outside
wind is strong.
Mechanical sound is heard
from the indoor unit.
• This is the switching sound in turning on/off
the fan or the compressor.
The sound of water flowing
is heard.
• This is the sound of refrigerant or condensed
water flowing in the unit.
In the following cases, stop using the air conditioner and consult
your dealer.
• When water leaks or drips from the indoor unit.
• When the upper operation indicator lamp blinks.
• When the breaker trips frequently.
• The remote control signal is not received in a room where an electronic ON/OFF
type fluorescent lamp (inverter-type fluorescent lamp, etc.) is used.
• Operation of the air conditioner interferes with radio or TV reception. An amplifier may be required for the affected device.
• When an abnormal sound is heard.
En-9
SG79Y951H01_EN.indd 9
4/9/07 4:20:51 PM
W
INSTALLATION PLACE AND
HEN THE AIR CONDITIONER IS NOT
GOING TO BE USED FOR A LONG TIME
1
ELECTRICAL WORK
Installation place
Set to the highest temperature in manual COOL mode,
and operate for 3 to 4 hours. Page 5
Avoid installing the air conditioner in the following places.
• Where there is much machine oil.
• Salty places such as the seaside.
• Where sulfide gas is generated such as a hot spring.
• Where oil is splashed or where the area is filled with oily smoke.
• Where there is high-frequency or wireless equipment.
• Where the air from the outdoor unit air outlet is blocked.
• Where the operation sound or air from the outdoor unit does not bother the
house next door.
This dries the inside of the unit.
2
3
4
Press
to stop the operation.
Turn off the breaker and/or disconnect the power supply plug.
The installation location of the outdoor unit should
be at least 10ft (3 m) away from the antennas for TV
sets, radios, etc. In areas where the reception is weak,
provide greater space between the outdoor unit and
the antenna of the affected device if operation of the air
conditioner interferes with radio or TV reception.
Remove all batteries from the remote controller.
To prevent the effects
of a fluorescent lamp,
keep as far apart as
possible.
When using the air conditioner again:
1
2
3
Inverter-type
fluorescent lamp
Keep a space to
prevent the picture distortion or
the noise.
Clean the air filters. Page 8
3 ft
(1m)
or more
Check that the air inlet and outlet of the indoor and
outdoor units are not blocked.
Cordless
phone or
Portable
phone
3 ft (1m)
or more
Radio
Check that the ground is connected correctly.
wall, etc.
Wellventilated dry
place
4 in (100 mm)
or more
8 in (200 mm)
or more
TV
10 ft (3 m)
or more
Electrical work
• Provide an exclusive circuit for the power supply of the air conditioner.
• Be sure to observe the breaker capacity.
If you have any questions, consult your dealer.
SPECIFICATIONS
Guaranteed operating range
MS-A09/12WA
Indoor
Upper limit
Cooling
Lower limit
95°F (35°C)
MSY-A15/17NA
Outdoor
DB
115°F (46.1°C) DB
Indoor
95°F (35°C)
Outdoor
DB
71°F (21.7°C) WB
—
71°F (21.7°C) WB
67°F (19.4°C) DB
67°F (19.4°C) DB
67°F (19.4°C) DB
57°F (13.9°C) WB
—
57°F (13.9°C) WB
115°F (46.1°C) DB
—
14°F (-10°C)
DB
—
En-10
SG79Y951H01_EN.indd 10
4/9/07 4:20:58 PM
4299 14th Avenue Markham, Ontario L3R 0J2 Canada
SG79Y951H01
SG79Y951H01_FR.indd 31
4/9/07 10:35:04 AM
Download PDF