SFU - Rohde & Schwarz Signal Generators

SFU - Rohde & Schwarz Signal Generators
Version
06.00
¸SFU Broadcast Test System
Data sheet
August
2007
CONTENTS
INTRODUCTION .......................................................................................................................................................................................... 4
APPLICATIONS OVERVIEW ........................................................................................................................................................................... 4
KEY FEATURES ........................................................................................................................................................................................... 5
General ................................................................................................................................................................................................ 5
Intuitive, fast and easy operation ......................................................................................................................................................... 5
Outstanding signal quality.................................................................................................................................................................... 5
Unrivaled flexibility for research and development .............................................................................................................................. 5
Ideal for use in production ................................................................................................................................................................... 5
Easy remote access ............................................................................................................................................................................ 5
SPECIFICATIONS........................................................................................................................................................................................ 6
RF CHARACTERISTICS ................................................................................................................................................................................ 6
Frequency ............................................................................................................................................................................................ 6
Frequency sweep ................................................................................................................................................................................ 6
Reference frequency ........................................................................................................................................................................... 6
Level .................................................................................................................................................................................................... 6
Spectral purity ...................................................................................................................................................................................... 7
®
High power and overvoltage protection (R&S SFU-B90 option) ......................................................................................................... 7
I/Q MODULATION ........................................................................................................................................................................................ 8
I/Q modulator ....................................................................................................................................................................................... 8
External wideband I/Q ......................................................................................................................................................................... 8
Internal baseband I/Q .......................................................................................................................................................................... 9
I/Q output ............................................................................................................................................................................................. 9
Extended I/Q (R&S®SFU-K80 option)................................................................................................................................................. 9
DIGITAL BASEBAND ................................................................................................................................................................................... 10
Internal test signals............................................................................................................................................................................ 10
MPEG-2 inputs .................................................................................................................................................................................. 10
®
ETI input/output (R&S SFU-B11 option) ........................................................................................................................................... 10
®
TS generator (R&S SFU-K20 option)................................................................................................................................................ 11
®
TS recorder (R&S SFU-K21 option) (see ordering information) ....................................................................................................... 11
®
TRP player (R&S SFU-K22 option) (see ordering information)......................................................................................................... 12
ANALOG BASEBAND .................................................................................................................................................................................. 13
Analog video/audio input ................................................................................................................................................................... 13
Internal audio signal generator .......................................................................................................................................................... 13
®
Internal video signal generator (R&S SFU-K23 option) (see ordering information) .......................................................................... 13
DIGITAL MODULATION SYSTEMS................................................................................................................................................................. 15
Terrestrial standards .......................................................................................................................................................................... 15
®
DVB-T/H (R&S SFU-K1 option) ........................................................................................................................................................ 15
®
T-DMB/DAB (R&S SFU-K11 option) ................................................................................................................................................. 15
®
DMB-T (TDS-OFDM, R&S SFU-K7 option) (see ordering information) ............................................................................................ 15
®
DTMB/DMB-TH (R&S SFU-K12 option) (see ordering information) ................................................................................................. 16
®
ISDB-T/ISDTV/ISDB-TSB (R&S SFU-K6 option)................................................................................................................................ 16
TM
®
MediaFLO (R&S SFU-K10 option) (see ordering information) ...................................................................................................... 16
®
ATSC/8VSB (R&S SFU-K4 option) ................................................................................................................................................... 17
ATSC/A-VSB (R&S®SFU-K14 option) .............................................................................................................................................. 17
Cable standards................................................................................................................................................................................. 17
®
DVB-C/ISDB-C (R&S SFU-K2 option) .............................................................................................................................................. 17
®
J.83/B (R&S SFU-K5 option)............................................................................................................................................................. 18
Satellite standards ............................................................................................................................................................................. 18
®
DVB-S/DVB-DSNG (R&S SFU-K3 option)........................................................................................................................................ 18
®
DVB-S2 (R&S SFU-K8 option) (see ordering information) ............................................................................................................... 19
®
DIRECTV legacy modulation (R&S SFU-K9 option) (see ordering information)............................................................................... 19
®
AMC (R&S SFU-K108 option) (see ordering information) ................................................................................................................ 19
ANALOG MODULATION SYSTEMS ................................................................................................................................................................ 20
®
Standard B/G (R&S SFU-K190 option) (see ordering information)................................................................................................... 20
®
Standard D/K (R&S SFU-K191 option) (see ordering information) ................................................................................................... 20
®
Standard I (R&S SFU-K192 option) (see ordering information) ........................................................................................................ 21
®
Standard M/N (R&S SFU-K193 option) (see ordering information) .................................................................................................. 21
®
Standard L (R&S SFU-K194 option) (see ordering information) ....................................................................................................... 22
®
Multi ATV predefined (R&S SFU-K199 option) (see ordering information) ....................................................................................... 22
2
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
SIMULATION ............................................................................................................................................................................................. 24
®
Arbitrary waveform generator (R&S SFU-K35 option) (see ordering information)............................................................................ 24
®
T-DMB/DAB waveforms (R&S SFU-K351 option)............................................................................................................................. 25
®
DVB-H waveforms (R&S SFU-K352 option) ..................................................................................................................................... 25
®
DRM waveforms (R&S SFU-K353 option) ........................................................................................................................................ 25
®
DTV interferers (R&S SFU-K354 option) .......................................................................................................................................... 25
TM
®
MediaFLO waveforms (R&S SFU-K355 option) ............................................................................................................................ 26
®
Cable interferers (R&S SFU-K356 option) ........................................................................................................................................ 26
®
Interferer management (R&S SFU-K37 option) ................................................................................................................................ 26
®
AWGN noise (R&S SFU-K40 option) ................................................................................................................................................ 27
®
Phase noise (R&S SFU-K41 option) ................................................................................................................................................. 27
®
Impulsive noise (R&S SFU-K42 option) ............................................................................................................................................ 27
®
Multinoise use (R&S SFU-K43 option) (see ordering information) ................................................................................................... 27
®
Fading simulator (R&S SFU-B30 option) .......................................................................................................................................... 28
®
Enhanced fading (R&S SFU-K30 option) (see ordering information) ............................................................................................... 29
®
Gaussian fading (R&S SFU-K32 option) (see ordering information) ................................................................................................ 30
®
BER measurements (R&S SFU-K60 option)..................................................................................................................................... 30
TRIGGER INPUTS/OUTPUTS ....................................................................................................................................................................... 30
Triggers and connections reserved for future use ............................................................................................................................. 30
GENERAL DATA ........................................................................................................................................................................................ 31
System data ....................................................................................................................................................................................... 31
Operating data ................................................................................................................................................................................... 31
ORDERING INFORMATION ...................................................................................................................................................................... 32
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
3
Introduction
®
The R&S SFU Broadcast Test System has been designed as a platform for different applications and for future options. It provides
multiple instrument functionality in a cabinet of only four height units and offers unrivaled RF and baseband characteristics.
®
Due to its modular design, the R&S SFU can be optimally adapted to the requirements of different applications. It is an ideal research
and development tool for making improvements to introduced standards and for generating new standard signals. Applications that
®
®
previously required many different instruments are now fully covered by the R&S SFU. The modern, intuitive concept of the R&S SFU
ensures fast and easy operation.
Applications overview
• Broadcast test transmitter with all important digital and analog standards in one box
• Wide level range for receiver and chip test applications
• Wide range of inputs and outputs for research and development applications
• Wide frequency range for limit tests
• RF generator and IF generator functionality
• Frequency steps of 0.1 Hz and uninterrupted level change for margin tests (PLL, AGC)
• Digital noise source with highly precise carrier/noise ratio for channel simulation
• Variable noise signal by combining several internal noise sources
• Dynamic fading (channel) simulation for testing mobile and multipath reception, diversity simulations
• Intelligent interferer management for a variety of sources (ARB, ATV predefined, analog I/Q, digital I/Q)
• User-definable signal impairments and signal modifications for research and development
• Modifiable standard parameters for research and development
• BER measurement on PRBS as well as on MPEG-2 transport streams
• Internal transport stream and video generator and special test signals
• Internal transport stream and ETI recorder and player for recording and replaying data streams
• Internal TRP player for replaying data streams
®
TM
• Internal arbitrary waveform generator together with R&S WinIQSIM
software
• Use of waveform and data stream libraries
• Wide choice of libraries with test data streams and waveforms
• Wide choice of T-DMB/DAB test waveforms
• Remote control capability for use in production
• Wear-free electronic attenuator for use in production
4
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
Key features
General
•
•
•
•
•
•
Analog TV, digital TV and audio broadcast multistandard test platform
Output frequency from 100 kHz to 3 GHz
Generation of internal noise and interferer signals
Fully digital baseband signal processing
Upgradeability to multifunctional broadcast test system
Easy installation of most options at customer site
Intuitive, fast and easy operation
•
•
•
•
Color display with 1024 × 768 pixels (XVGA format)
Intuitive user interface with Windows XP Embedded
Context-sensitive help system
User-definable favorites for fast access
Outstanding signal quality
•
•
•
•
I/Q modulator with 180 MHz RF bandwidth
Very low SSB phase noise of typ. –135 dBc at 1 GHz (20 kHz carrier offset, 1 Hz measurement bandwidth)
High optional output power of up to +19 dBm (PEP), overrange +26 dBm
High-stability reference oscillator as standard
Unrivaled flexibility for research and development
•
•
•
•
•
•
•
Multistandard platform that supports expansions
Transmission simulations
TS baseband generator and recorder with universal coder for realtime signal generation
TRP baseband player for realtime signal generation
Video generator for realtime signal generation
Arbitrary waveform generator with 64 Msample (128 Msample), supported by R&S®WinIQSIMTM software
Internal hard disk as standard for storing waveforms and modulation data
Ideal for use in production
• Wear-free electronic attenuator of up to 3 GHz over the full level range
• Minimum space requirements: generator and test transmitter accommodated in one instrument of only four height units
Easy remote access
• Remote control via GPIB and LAN
• User-friendly remote access by VNC or Remote Desktop
• USB connectors for keyboard, mouse, and USB memory module
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
5
Specifications
Specifications apply under the following conditions:
30 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to, and all internal
adjustments performed. Data designated "overrange" or "underrange" and data without tolerance limits is not binding.
RF characteristics
Frequency
Range
underrange
Accuracy
Resolution of setting
Resolution of synthesis
standard, fundamental frequency range
750 MHz to 1500 MHz
300 kHz to 3 GHz
100 kHz to <300 kHz
depends on reference frequency
0.1 Hz
5 µHz
Frequency sweep
Digital sweep in discrete steps
operating modes
sweep range
step width (lin)
step width (log)
automatic, single shot, manual or external
trigger, linear or logarithmic
full range
full range
0.01 % to 100 %
Reference frequency
Accuracy
Aging
Temperature effect
Warm-up time
Input for external reference signal
Output for internal reference signal
–7
after 30 days of uninterrupted operation
in operating temperature range from
0 °C to +50 °C, standard
to nominal thermostat temperature
frequency (approx. sinewave)
maximum deviation
input level
limits recommended
input impedance
connector
frequency (approx. sinewave)
level
source impedance
connector
<1 × 10
–9
<1 × 10 /day
–8
<6 × 10
≤10 min
5 MHz, 10 MHz, or 13 MHz
–6
3 × 10
≥–6 dBm to ≤19 dBm
0 dBm to 19 dBm
50 Ω
BNC female, rear
10 MHz or external input frequency
typ. 5 dBm
50 Ω
BNC female, rear
Level
RF output
Maximum level
Setting range
Level accuracy
Additional uncertainty with ALC OFF,
S&H (sample & hold)
Output impedance
VSWR in 50 Ω system
Uninterrupted level setting
connector
output impedance
without option
®
with R&S SFU-B90 option (high power
and overvoltage protection)
without option
®
with R&S SFU-B90 option (high power
and overvoltage protection)
resolution
"auto" attenuator mode,
temperature range +18 °C to +33 °C
f ≤ 3 GHz / level ≥–100 dBm
(This function is needed only for some
special applications.)
ALC state ON, standard
f ≤ 3 GHz
®
ALC state ON, with R&S SFU-B90 option
"normal" attenuator mode
"high power" attenuator mode
"fixed" attenuator mode, ALC state ON
setting range
N female, front
50 Ω
≥+13 dBm (PEP)1
≥+19 dBm (PEP)
–120 dBm to +20 dBm
–120 dBm to +30 dBm
0.01 dB
<0.5 dB
<0.2 dB
<1.6, typ. <1.4
<1.8, typ. <1.6
<1.9, typ. <1.7
>20 dB
1 PEP = peak envelope power (CW), for other modulation modes depending on crest factor.
6
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
Back-feed (from ≥50 Ω source)
maximum permissible RF power in output
frequency range of RF path
maximum permissible DC voltage
®
with R&S SFU-B90 option (high power and
overvoltage protection)
maximum permissible RF power in
output frequency range of RF path
1 MHz < f ≤ 1 GHz
1 GHz < f ≤ 2 GHz
2 GHz < f ≤ 3 GHz
maximum permissible DC voltage
0.5 W
20 V
50 W
25 W
10 W
35 V
Spectral purity
Harmonics
Nonharmonics
Subharmonics
Wideband noise
SSB phase noise
Residual FM
Residual AM
level ≤ 8 dBm, CW
®
level ≤ 12 dBm with R&S SFU-B90 option,
"high power" attenuator mode, CW
level ≥ –50 dBm CW, vector modulation
(full-scale input), >10 kHz offset from
carrier and outside the modulation
spectrum
0.3 MHz ≤ f ≤ 200 MHz
200 MHz < f ≤ 1.5 GHz
1.5 GHz < f ≤ 3.0 GHz
>850 kHz offset from carrier and outside
the modulation spectrum
0.3 MHz ≤ f ≤ 200 MHz
200 MHz < f ≤ 1.5 GHz
1.5 GHz < f ≤ 3.0 GHz
caused by power supply unit or
mechanical components, at RF = 1 GHz,
50 Hz to 10 kHz offset from carrier
f > 1.5 GHz to 3.0 GHz
carrier offset >10 MHz,
measurement bandwidth 1 Hz CW
20 MHz ≤ f ≤ 200 MHz
200 MHz < f ≤ 1.5 GHz
1.5 GHz < f ≤ 3 GHz
vector modulation with full-scale input
I/Q input gain +3 dB
20 MHz ≤ f ≤ 200 MHz
200 MHz < f ≤ 1.5 GHz
1.5 GHz < f ≤ 3 GHz
carrier offset 20 kHz,
measurement bandwidth 1 Hz
20 MHz ≤ f ≤ 200 MHz
f = 1 GHz
f = 2 GHz
f = 3 GHz
rms value at f = 1 GHz
300 Hz to 3 kHz
20 Hz to 23 kHz
rms value 20 Hz to 23 kHz at f = 1 GHz
<–30 dBc
<–30 dBc
<–77 dBc
<–80 dBc
<–74 dBc
<–77 dBc
<–86 dBc
<–80 dBc
<–70 dBc
<–74 dBc
<–146 dBc
<–150 dBc
<–148 dBc
<–143 dBc
<–146 dBc
<–145 dBc
<–128 dBc
<–131 dBc
<–125 dBc
<–121 dBc
<1 Hz
<4 Hz
<0.02 %
High power and overvoltage protection (R&S®SFU-B90 option)
Extends the output level and protects the instrument against externally applied RF power from a 50 Ω source.
Maximum level
19 dBm
Maximum permissible RF power
50 W
Maximum permissible DC voltage
35 V
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
7
I/Q modulation
I/Q modulator
Operating modes
Modulation frequency range
I/Q modulation inputs
I/Q wideband
connector
input impedance
VSWR up to 30 MHz
input voltage for full-scale input
minimum input voltage for ALC state ON
external wideband I/Q
internal baseband I/Q
100 MHz
BNC female, front
50 Ω
<1.2
Vi 2 + Vq2 = 0.5 V
0.1 V
Static error vector
Modulation frequency response
Carrier leakage
I/Q impairments
I/Q swap
rms value
f ≤ 200 MHz
f > 200 MHz
peak value
f ≤ 200 MHz
f > 200 MHz
I/Q wideband
up to 50 MHz
up to 5 MHz
without input signal, referenced to
full-scale input2
I offset, Q offset
setting range
resolution
gain imbalance
setting range
resolution
quadrature offset
setting range
resolution
I and Q signals swapped
–10° to +10°
0.1°
ON, OFF
connector
input impedance
VSWR up to 50 MHz
BNC female, front
50 Ω
<1.2
<0.3 %
<(0.2 % + 0.1 % × f/GHz)
<0.6 %
<(0.4 % + 0.2 % × f/GHz)
<3 dB
<0.6 dB
<–55 dBc
–10 % to +10 %
0.01 %
–1 dB to +1 dB
0.001 dB
External wideband I/Q
I/Q inputs (I/Q EXT)
(connector equal to I/Q analog IN)
input voltage for full-scale input
minimum input voltage for ALC state ON
0.1 V
100 MHz
without input signal, referenced to
2
full-scale input
16QAM, pulse filtering: root raised cosine
roll-off, α = 0.15, symbol rate 10 kHz
rms value
f ≤ 200 MHz
f > 200 MHz
peak value
f ≤ 200 MHz
f > 200 MHz
<–55 dBc
Modulation frequency range3
Carrier leakage
Static error vector
Vi 2 + Vq2 = 0.5 V
<0.3 %
<(0.2 % + 0.1 % × f/GHz)
<0.6 %
<(0.4 % + 0.2 % × f/GHz)
2 Value applies after 1 hour warm-up and recalibration for 4 hours of operation and temperature variations of less than 5 °C.
3 I/Q wideband ON. This frequency response superimposes all frequency responses specified in the data sheet.
8
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
Internal baseband I/Q
Signal characteristics
D/A converter
data rate
resolution
sampling rate
with amplitude, group delay and
Si correction
bandwidth 0.1 dB
I/Q impairment
I offset, Q offset
setting range
resolution
gain imbalance
setting range
resolution
quadrature offset
setting range
resolution
Internal optimization of RF parameters is always ON.
see digital modulation systems
100 MHz
16 bit
400 MHz
(internal interpolation × 4)
Aliasing filter
40 MHz
–10 % to +10 %
0.01 %
–1 dB to +1 dB
0.01 dB
–10° to +10°
0.1°
I/Q output
I/Q output
connector
output impedance
With RL = 50 Ω, the output voltage
depends on the set modulation signal.
output voltage
Offset
BNC female, rear
50 Ω
0.5 V (VP)
<1 mV
Extended I/Q (R&S®SFU-K80 option)
®
®
The R&S SFU-K80 option allows external analog and digital signals to be fed into the baseband signal processing of the R&S SFU.
Input signals can be faded in and noise signals superimposed if the fading simulator and noise options have been installed. In addition,
the digital baseband signals are available externally.
Analog I/Q IN
I/Q analog inputs (I/Q EXT)
(connector equal to I/Q wideband IN)
connector
BNC female, front
input impedance
VSWR (up to 25 MHz)
50 Ω
<1.2
input voltage for full-scale input
Vi 2 + Vq2 = 0.5 V
frequency response up to 30 MHz
A/D converter
offset
0.5 dB
100 MHz/14 bit
<–55 dBFS
connector
output level
level
word width
analog bandwidth
symbol rate
Mini D Ribbon, 26 pins, rear
channel link
LVDS
16 bit
0 Hz to 31 MHz
3 ksps to 100 Msps
connector
output level
level
word width
symbol rate
Mini D Ribbon, 26 pins, rear
channel link
LVDS
16 bit
100 Msps
Digital I/Q IN
I/Q digital input
I/Q digital modulation inputs
Digital I/Q OUT
I/Q digital output
I/Q digital modulation outputs
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
9
Digital baseband
Internal test signals
MPEG-2 TS packet
MPEG-specific TS packet
DIRECTV TS packet
DIRECTV-specific TS packet
PRBS
header + 184 byte payload
PID
sync byte + 187 byte payload
header + 127 byte payload
130 byte payload
PRBS in accordance with ITU-T O.151
00 (hex), FF (hex), PRBS (selectable)
NULL (1FFF hex)/variable
00 (hex), FF (hex), PRBS (selectable)
PRBS (DIRECTV only)
PRBS (DIRECTV only)
23
15
2 –1 / 2 –1 (selectable)
connector
input level
input impedance
connector
ASI input level
SMPTE 310 input level
input impedance
ASI data rate
SMPTE 310 data rate
ASI, SMPTE 310, SPI
stuffing packets
D-Sub female, 25 pins, front and rear
LVDS
100 Ω, differential
BNC female, front and rear
200 mV to 880 mV
400 mV to 880 mV
75 Ω
270 Mbit/s
19.392658 Mbit/s
ON/OFF
see MPEG-2 TS packet at “Internal test
signals”
BNC female, rear
TTL, sinewave (0 dBm)
50 Ω
packet length, data rate, useful data rate
MPEG-2 inputs
Parallel SPI input
ASI/SMPTE 310 serial input
Stuffing
TS EXT CLK
Indication
connector
input level
input impedance
measured values
ETI input/output (R&S®SFU-B11 option)
®
®
The R&S SFU-B11 option allows external ETI data streams to be fed into the baseband signal processing of the R&S SFU.
T-DMB/DAB signals can be faded in and noise signals superimposed if the fading simulator and noise options have been installed.
ETI input/output
Serial ETI input
Serial ETI output4
connector
ETI input level
input impedance
ETI data rate
coding
connector
ETI output level
output impedance
ETI data rate
coding
in line with ETI NI, ETI NA5592,
ETI NA5376
BNC female, rear
0 V to ±2.37 V (ITU-T G.703/G.704)
75 Ω
2048 kbit/s
HDB3
BNC female, rear
0 V to ±2.37 V (ITU-T G.703/G.704)
75 Ω
2048 kbit/s
HDB3
4 Requires Coder 2110.3306 with C.I. >4.xx and R&S®SFU-B11 model .03 (2110.3887)
10
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
TS generator (R&S®SFU-K20 option)
Serial TS output
Transport stream
mode
connector
output impedance
ASI
output level
data rate
mode
SMPTE 310M
output level
data rate
files
file format
length of transport stream packets
ASI, SMPTE 310M (selectable)
BNC female, rear
75 Ω
200 mV to 880 mV
270 Mbit/s
packet or continuous
400 mV to 880 mV
19.392658 Mbit/s
Rohde & Schwarz data streams
generated transport streams (GTS) format
ATSC: 188/208 bytes (selectable)
DVB: 188/204 bytes (selectable)
generation of endless and seamless
transport streams with repetition of video,
audio, and data contents
100 kbit/s to 214 Mbit/s (including null
packets)
max. 90 Mbit/s
max. 80 Mbyte payload
sequence length
data rate
PCR jitter
net data rate
data volume
shape
frequency
amplitude
sinewave, rectangle, triangle
1 MHz to 100 kHz
0 ms to 1 ms, in increments of 0.1 µs
moving picture sequences and test patterns
with test tones, for 625 and 525 lines;
DVB/ATSC systems, additional signals via
options
Signal set
TS recorder (R&S®SFU-K21 option) (see ordering information)
®
The TS recorder can be used for recording ETI data streams if the ETI input/output (R&S SFU-B11 option) is installed.
Parallel input
Serial TS input
Version 06.00, August 2007
mode
connector
input impedance
SPI
input level
clock
mode
connector
input impedance
ASI
input level
data rate
mode
SMPTE 310M
input level
data rate
SPI
D-Sub female, 25 pins, front and rear
100 Ω, differential
LVDS
84.375 kHz to 7.5 MHz (60 Mbit/s NTFS)
84.375 kHz to 11.25 MHz (90 Mbit/s CFS)
ASI, SMPTE 310M, ETI (selectable)
BNC female, front and rear
75 Ω
200 mV to 880 mV
270 Mbit/s
packet or continuous
400 mV to 880 mV
19.392658 Mbit/s
®
R&S SFU Broadcast Test System
11
Recording
mode
TRP
recording via ASI, SPI, SMPTE 310M, or
ETI; check of transport stream structure
and packet size (188/204/208);
SPI 8-bit interface: recording of data as a
function of DVALID signal
recording via SPI or ETI; check of
transport stream structure and packet size
(188/204/208); recording of 8-bit data +
DVALID + PSYNC or recording of 10-bit
raw data
recording via SPI; no checking of transport
stream structure; recording of 8-bit data
100 kbit/s to 90 Mbit/s (including null
packets)
max. data volume for recording limited
only by hard disk size
depends on net data rate of incoming
transport stream and on hard disk size
®
see R&S SFU-K22 option
®
see R&S SFU-K22 option
®
see R&S SFU-B11 option
T10
BIN
data rate
data volume
recording time
Replay
Serial TS output
Serial ETI input/output
TRP player (R&S®SFU-K22 option) (see ordering information)
®
To output ETI data streams to external T-DMB/DAB devices, the R&S SFU-B11 ETI input/output option is required.
Replay
file format
length of transport stream packets
replay time/sequence length
data rate
data volume
Serial TS output
Serial ETI output
12
®
R&S SFU Broadcast Test System
mode
connector
output impedance
ASI
output level
data rate
mode
SMPTE 310M
output level
data rate
TRP, T10, BIN, ETI, DAB/DAB_C
(any recorded data streams)
corresponding to externally
applied/recorded transport stream
endless (but not seamless) replay with cut
at transition from end of file to beginning of
file
corresponding to recording data rate and
setting (100 kbit/s to max. 90 Mbit/s) from
hard disk
corresponding to recorded data volume;
limited only by hard disk size
ASI, SMPTE 310M (selectable)
BNC female, rear
75 Ω
200 mV to 880 mV
270 Mbit/s
packet or continuous
400 mV to 880 mV
19.392658 Mbit/s
®
see R&S SFU-B11 option
Version 06.00, August 2007
Analog baseband
Analog video/audio input
If the external video/audio inputs are used, the analog I and Q inputs can no longer be assigned.
®
Video input
Audio input
connector
input level CCVS
input impedance
DC restoration
connector
input level
input impedance
included in R&S SFU-K190 to -K194
BNC female, front panel, I input with
®
R&S SFU-Z19 adapter
Vpp = 1 V
75 Ω
clamping of back porch
BNC female, front, Q input
0 dBm
50 Ω
Internal audio signal generator
Audio signals
number of signals
frequency
level
NICAM signals
fixed sequences
stereo1
dual1
mono1
2, can be set separately
30 Hz to 15 kHz, in 1 Hz steps
–60 dB to +12 dB, in 0.01 dB steps,
6 dBu corresponds to standard deviation
L: 1 kHz
R: 2 kHz
L: 2 kHz
R: 5 kHz
F: 1 kHz
®
Internal video signal generator (R&S SFU-K23 option) (see ordering information)
Internal video signal generator
Video signals
Insertion test signal structure
PAL – color bar 75 %
PAL M – color bar 75 %
Version 06.00, August 2007
®
ATV video basic
in line with country-specific standards
first field
lines 8, 10
line 16
lines 17, 18
line 19
lines 20, 21
second field
line 323
line 329
lines 330, 331
line 332
line 333
lines 334, 335
first field
line 17
line 18
second field
line 17
line 18
included in R&S SFU-K190 to -K194
COLORBARS_75 (PAL)
COLORBARS_75 (PAL M)
COLORBARS_75 (PAL N)
COLORBARS_75 (NTSC)
COLORBARS_75 (SECAM)
FUBK (PAL)
2T pulse
data line 1
CCIR17
CCIR18/2
teletext test line
teletext test line
data line 2
CCIR330/5
CCIR331/1
sinx/x
teletext test line
NTC7 composite
FCC composite
NTC7 combined
sinx/x
®
R&S SFU Broadcast Test System
13
PAL N – color bar 75 %
NTSC – color bar 75 %
SECAM – color bar 75 %
PAL – FuBK
Additional video signals
14
®
R&S SFU Broadcast Test System
first field
lines 8, 10
line 16
line 17
line 18
line 19
lines 20, 21
second field
line 323
lines 330, 331
line 332
line 333
lines 334, 335
first field
line 17
line 18
second field
line 17
line 18
first field
lines 7 to 14
line 15
line 17
line 18
second field
lines 320 to 328
line 330
lines 331,332
line 333
first field
lines 8, 10
line 16
lines 17, 18
line 19
lines 20, 21
second field
line 323
line 329
lines 330, 331
line 332
line 333
lines 334, 335
ATV video
2T pulse
data line 1
CCIR17
CCIR18/1
CCIR18/2
teletext test line
teletext test line
CCIR330/5
CCIR331/1
sinx/x
teletext test line
NTC7 composite
FCC composite
NTC7 combined
sinx/x
discriminating signal
teletext test line
CCIR17
CCIR18, 6 multiburst packets
discriminating signal
CCIR330
CCIR331
CCIR331/1
2T pulse
data line 1
CCIR17
CCIR18/2
teletext test line
teletext test line
data line 2
CCIR330/5
CCIR331/1
sinx/x
teletext test line
®
see R&S ATV Video option
Version 06.00, August 2007
Digital modulation systems
Terrestrial standards
DVB-T/H (R&S®SFU-K1 option)
DVB-T/H
Modulation
Coding
in line with EN 300744/EN 302304
mode
bandwidth
MER
modulation frequency response
shoulder attenuation
constellation
code rate
guard interval
FFT mode
interleaver
TPS
carrier modification
Special functions
scrambler, sync byte inversion,
Reed-Solomon encoder, convolutional
interleaver, bit interleaver, symbol
interleaver, guard interval
Test signals
COFDM
5 MHz, 6 MHz, 7 MHz, 8 MHz (settable for
variable bandwidth: 1 MHz to 10 MHz)
>40 dB5
<±0.2 dB
>48 dB
QPSK, 16QAM, 64QAM, hierarchical
coding
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
2k, 4k, and 8k COFDM
native and in-depth
in line with DVB-T/H
carriers and carrier groups can be
switched off
can be switched off
TS test packet (see "Internal test signals")
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
T-DMB/DAB (R&S®SFU-K11 option)
T-DMB/DAB
Transmission
Single-frequency network
Special functions
in line with T-DMB/EN 300401
modulation
mode
bandwidth
modulation frequency response
shoulder attenuation
network mode
control
external ETI data stream
PRBS
Gaussian fading profiles
Korea/Europe
COFDM
I, II, III, IV
1.536 MHz
<0.2 dB
>45 dB
MFN
MID, manual
®
requires R&S SFU-B11 option
can be inserted into a subchannel6
®
included in T-DMB/DAB R&S SFU-K11,
®
requires R&S SFU-B30 option
DMB-T (TDS-OFDM, R&S®SFU-K7 option) (see ordering information)
DMB-T (TDS-OFDM)
Modulation
Coding
Special functions
Single-frequency network
in line with TDS-OFDM
mode
bandwidth
modulation frequency response
shoulder attenuation
constellation
code rate
guard interval
time interleaver
FFT mode
byte interleaver, randomizer, sync word
randomizer, pilot data, guard interval,
power boost
randomizer restart
network mode
control
Test signals
field trials in China
COFDM
6 MHz, 7 MHz, 8 MHz (settable for variable
bandwidth: 5.6 MHz to 7.962 MHz)
<0.2 dB
>50 dB
QPSK, 16QAM, 64QAM
4/9, 2/3, 8/9
420, 945
48, 240, 720
4k COFDM
can be switched off
packet/frame
MFN
MIP, manual
TS test packet (see “Internal test signals”)
5 With internal test signals.
6 Can be inserted into an existing, user-selectable subchannel of an incoming, valid ETI data stream.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
15
DTMB/DMB-TH (R&S®SFU-K12 option) (see ordering information)
DTMB (TDS-OFDM)
DMB-TH
Modulation
Coding
Special functions
Single-frequency network
in line with GB20600-2006
in line with LS specification
mode
bandwidth
modulation frequency response
shoulder attenuation
constellation
code rate
guard interval
time interleaver
FFT mode
GI power boost
LDPC output
QAM and QPSK constellation
DMB-TH mode
network mode
control
Test signals
field trials in China
COFDM/single carrier
6 MHz, 7 MHz, 8 MHz
<0.2 dB
>50 dB
QPSK, QPSK-NR, 16QAM, 32QAM,
64QAM
0.4, 0.6, 0.8
420, 595, 945
off, 48, 240, 720 symbols
4k COFDM/single carrier
can be switched off
I first, Q first, can be switched over, Plus,
Minus
can be switched over
can be switched on
MFN
MIP, manual
TS test packet (see "Internal test signals")
ISDB-T/ISDTV/ISDB-TSB (R&S®SFU-K6 option)
ISDB-T, ISDTV
ISDB-TSB
Modulation
Coding
Special functions
in line with ARIB STD-B31 version 1.5
in line with ARIB STD-B29
mode
bandwidth
number of segments
ARIB STD-B31
ARIB STD-B29
MER
modulation frequency response
shoulder attenuation
FFT mode
number of layers
constellation
code rate
guard interval
time interleaver
ISDB-T
ISDB-TSB
scrambler, Reed-Solomon, byte interleaver,
bit interleaver, frequency interleaver, guard
interval, pilots, OFDM segments
AC information
Test signals
OFDM
6 MHz (variable: ±1000 ppm)
13
1, 3
>40 dB
<0.2 dB
>48 dB
2k, 4k, and 8k
1 to 3
QPSK, DQPSK, 16QAM, 64QAM
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
0, 1, 2, 4, 8, 16
0, 1, 2, 4, 8, 16, 32
can be switched off
PRBS, all "1"
TS test packet (see "Internal test signals")
MediaFLOTM (R&S®SFU-K10 option) (see ordering information)
TM
MediaFLO
Modulation
Coding
Special function
Test signals
16
®
R&S SFU Broadcast Test System
in line with QUALCOMM 80-T0455-1
Rev. E
mode
bandwidth
modulation frequency response
shoulder attenuation
FFT mode
TDM1
COFDM
5 MHz, 6 MHz
<0.2 dB
40 dB
4k COFDM
can be switched off
PRBS
Version 06.00, August 2007
ATSC/8VSB (R&S®SFU-K4 option)
ATSC/8VSB
Modulation
in line with ATSC Doc. A/53 (8VSB)
mode
bandwidth
symbol rate
range
pilot
range
pulse filtering
MER
modulation frequency response
shoulder attenuation
Coding
Special functions
Test signals
input data rate
randomizer, interleaver
8VSB
6 MHz
10.762 Msps
±5 % settable
1.25 (can be switched off)
settable (from 0 to 5 in steps of 0.001)
root raised cosine roll-off, α = 0.115
>40 dB7
<±0.25 dB
>45 dB
19.392658 Mbit/s
can be switched off
TS test packet (see "Internal test signals")
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
ATSC/A-VSB (R&S®SFU-K14 option)
ATSC/A-VSB
Modulation
Coding
Special functions
Test signals
in line with ATSC
mode
bandwidth
symbol rate
range
pilot
range
pulse filtering
MER
modulation frequency response
shoulder attenuation
input data rate
SRS modes
turbo stream modes
randomizer, interleaver
in preparation
8VSB
6 MHz
10.762 Msps
±5 % settable
1.25 (can be switched off)
settable (from 0 to 5 in steps of 0.001)
root raised cosine roll-off, α = 0.115
>40 dB
<±0.25 dB
>45 dB
19.392658 Mbit/s
0 to 4
0 to 8
can be switched off
TS test packet (see "Internal test signals")
PRBS before convolutional encoder
PRBS after convolutional encoder
PRBS before mapper
Cable standards
DVB-C/ISDB-C (R&S®SFU-K2 option)
DVB-C
ISDB-C
Modulation
in line with EN 300429 (ITU-T J.83/A)
in line with ITU-T J.83/C
mode
symbol rate
pulse filtering
Special functions
Test signals
MER
modulation frequency response
shoulder attenuation
energy dispersal, Reed-Solomon encoder
(204, 188, t = 8), convolutional interleaver
16QAM, 32QAM, 64QAM,
128QAM, 256QAM
0.1 Msps to 8 Msps, settable
root raised cosine roll-off, α = 0.15,
variable roll-off (0.1; 0.13; 0.15; 0.18; 0.20)
>40 dB
±0.25 dB
>48 dB
can be switched off
TS test packet (see “Internal test signals”)
PRBS before mapper
7 With internal test signals.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
17
J.83/B (R&S®SFU-K5 option)
J.83/B
Modulation
Coding
Special functions
in line with ITU-T J.83/B
mode
bandwidth
symbol rate
64QAM
256QAM
1024QAM
pulse filtering
MER
modulation frequency response
shoulder attenuation
64QAM
256QAM
1024QAM
input data rate
64QAM
256QAM
1024QAM
data interleaver
randomizer, Reed-Solomon encoder,
interleaver, checksum
Test signals
64QAM, 256QAM, 1024QAM
6 MHz
5.0569 Msps
5.3600 Msps
5.3600 Msps
root raised cosine roll-off,
α = 0.18 (64QAM), 0.12 (256/1024QAM)
>40 dB
±0.25 dB
>50 dB
>45 dB
>45 dB
26.97035 Mbit/s
38.81070 Mbit/s
49.02525 Mbit/s
can be switched off, level 1 and level 2
can be switched off
TS test packet (see "Internal test signals")
PRBS before Trellis encoder
PRBS before mapper
Satellite standards
DVB-S/DVB-DSNG (R&S®SFU-K3 option)
DVB-S/DVB-DSNG
Modulation
MER
modulation frequency response
shoulder attenuation
code rate
Coding
Special functions
Test signals
18
in line with EN 300421/EN 301210
mode
symbol rate
overrange
pulse filtering
®
R&S SFU Broadcast Test System
energy dispersal, Reed-Solomon encoder
(204, 188, t = 8), convolutional interleaver
QPSK, 8PSK, 16QAM
0.1 Msps to 45 Msps, settable
>45 Msps to 66 Msps
root raised cosine roll-off, α = 0.35,
variable roll-off (0.25; 0.30; 0.35; 0.40; 0.45)
38 dB (27.5 Msps)
±0.25 dB
>45 dB
QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
8PSK: 2/3, 5/6, 8/9
16QAM: 3/4, 7/8
can be switched off
TS test packet (see “Internal test signals”)
PRBS before convolutional encoder
Version 06.00, August 2007
DVB-S2 (R&S®SFU-K8 option) (see ordering information)
DVB-S2
Modulation
Coding
Special function
Test signals
in line with EN 302307, broadcast services
mode
symbol rate
QPSK, 8PSK
16APSK
32APSK
pulse filtering
MER
modulation frequency response
shoulder attenuation
code rate
QPSK
8PSK
16APSK
32APSK
FEC frame
pilot insertion
error insertion
QPSK, 8PSK, 16APSK, 32APSK
1 Msps to 35 Msps (overrange 40 Msps)
2 Msps to 30 Msps
2 Msps to 25 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
±0.25 dB
>45 dB
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
2/3, 3/4, 4/5, 5/6, 8/9, 9/10
3/4, 4/5, 5/6, 8/9, 9/10
normal, 64800 bit; short, 16200 bit
can be switched off
after CRC-8, BCH or LDPC
TS test packet (see “Internal test signals”)
DIRECTV legacy modulation (R&S®SFU-K9 option) (see ordering information)
DIRECTV legacy modulation
Modulation
Coding
Special function
in line with DIRECTV transmission
specifications
mode
symbol rate
overrange
pulse filtering
MER
modulation frequency response
shoulder attenuation
code rate
customer-specific DIRECTV streams
error insertion
Test signals
QPSK
20 Msps
1 Msps to 30 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
<±0.25 dB
>45 dB
1/2, 2/3, 6/7
can be replayed in 188-byte format, requires
R&S®SFU-K21, R&S®SFU-K22 option
after convolutional encoder
TS test packet (see "Internal test signals")
AMC (R&S®SFU-K108 option) (see ordering information)
AMC (advanced modulation coding)
in line with AMC
Modulation
mode
symbol rate
overrange for DIRECTV
pulse filtering
Coding
Special function
Version 06.00, August 2007
MER
modulation frequency response
shoulder attenuation
constellation
code rate
phase noise
supports DIRECTV as well as parts of
DVB-S and phase noise
QPSK, H8PSK
DVB-S: 1 Msps to 36 Msps (and up to
42 Msps depending on code rate)
DIRECTV: 20 Msps
1 Msps to 30 Msps
root raised cosine roll-off, α = 0.20,
variable roll-off (0.15, 0.20, 0.25, 0.35)
38 dB (20 Msps)
<±0.25 dB
>45 dB
QPSK
DIRECTV: 1/2, 2/3, 6/7
DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
can be switched on
®
R&S SFU Broadcast Test System
19
Analog modulation systems
Standard B/G (R&S®SFU-K190 option) (see ordering information)
Standard B/G
Vision modulation
in line with country-specific standard
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
S/N ratio
video
mode
modulation of sound carrier 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
pilot tone
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
B/G
CCIR – B/G Germany general half (can be
switched off)
<20 ns (with/without vestigial sideband
filtering)
B/G, can be switched off
<0.5 dB (–0.6 MHz to +4.8 MHz)
(with/without vestigial sideband filtering)
>60 dB weighted
mono, stereo, dual sound,
mono/NICAM, NICAM
FM
30 kHz (settable)
50 μs/75 μs (can be switched off)
5.5 MHz/5.74 MHz (settable)
13 dB/20 dB (settable)
in sound carrier 2 (can be switched off)
>60 dB weighted (CCIR)
®
see R&S SFU-K23 option
see video input
®
see R&S SFU-K23 option
see audio input
Standard D/K (R&S®SFU-K191 option) (see ordering information)
Standard D/K
Vision modulation
in line with country-specific standard
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
20
®
R&S SFU Broadcast Test System
S/N ratio
video
mode
modulation of sound carrier 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
pilot tone
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
D/K
OIRT – D/K half (can be switched off)
<20 ns (with/without vestigial sideband
filtering)
DK, DK FM2, DK NICAM, can be switched off
<0.5 dB (–1 MHz to +5.8 MHz)
(with/without vestigial sideband filtering)
>60 dB weighted
mono, stereo, dual sound, NICAM,
mono/NICAM
FM
30 kHz (settable)
50 μs/75 μs (can be switched off)
6.5 MHz/6.74 MHz (settable)
13 dB / 20 dB (settable)
in sound carrier 2 (can be switched off)
>60 dB weighted (CCIR)
®
see R&S SFU-K23 option
see video input
®
see R&S SFU-K23 option
see audio input
Version 06.00, August 2007
Standard I (R&S®SFU-K192 option) (see ordering information)
Standard I
Vision modulation
in line with country-specific standard
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
S/N ratio
video
mode
modulation of sound carrier 1
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
modulation of sound carrier 2
modulation mode
vision/sound carrier frequency spacing
vision/sound carrier level spacing
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
I
UK – I (can be switched off)
<20 ns (with/without vestigial sideband
filtering)
I, I1, can be switched off
<0.5 dB (–1 MHz to +4.8 MHz)
(with/without vestigial sideband filtering)
>60 dB weighted
mono, mono/NICAM, NICAM
FM
30 kHz (settable)
50 μs/75 μs (can be switched off)
6 MHz (settable)
13 dB (settable)
NICAM
6.552 MHz (settable)
20 dB (settable)
>60 dB weighted (CCIR)
®
see R&S SFU-K23 option
see video input
®
see R&S SFU-K23 option
see audio input
Standard M/N (R&S®SFU-K193 option) (see ordering information)
Standard M/N
Vision modulation
in line with country-specific standard
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
Version 06.00, August 2007
S/N ratio
video
mode
modulation of sound carrier 1, 2
modulation mode
frequency deviation
preemphasis
vision/sound carrier frequency spacing
vision/sound carrier level spacing
S/N ratio
sound
internal video generator
external video input
internal audio generator
external audio input
M/N
FCC – M/N (can be switched off)
<20 ns (with/without vestigial sideband
filtering)
M, N, can be switched off
<0.5 dB (–0.6 MHz to +4 MHz)
(with/without vestigial sideband filtering)
>60 dB weighted
BTSC mono, FM stereo Korea, FM dual
sound Korea
BTSC
25 kHz (settable)
50 μs/75 μs (can be switched off)
4.5 MHz (settable)
7 dB (settable)
>60 dB weighted (CCIR)
®
see R&S SFU-K23 option
see video input
®
see R&S SFU-K23 option
see audio input
®
R&S SFU Broadcast Test System
21
Standard L (R&S®SFU-K194 option) (see ordering information)
Standard L
Vision modulation
in line with country-specific standard
modulation
group delay
precorrection
frequency response
vestigial sideband
filtering
amplitude frequency response
Sound modulation
Video signals
Audio signals
mode
modulation of sound carrier 1
modulation mode
vision/sound carrier frequency spacing
vision/sound carrier level spacing
modulation of sound carrier 2
modulation mode
frequency deviation
vision/sound carrier frequency spacing
vision/sound carrier level spacing
internal video generator
external video input
internal audio generator
external audio input
L
TDF - L (can be switched off)
<20 ns (with/without vestigial sideband
filtering)
L, L NICAM, can be switched off
<0.5 dB (–1 MHz to +5.8 MHz)
(with/without vestigial sideband filtering)
AM mono, mono/NICAM, NICAM
NICAM
5.85 MHz (settable)
27 dB (settable)
AM
modulation depth 54 % (settable)
6.5 MHz (settable)
10 dB (settable)
®
see R&S SFU-K23 option
see video input
®
see R&S SFU-K23 option
see audio input
Multi ATV predefined (R&S®SFU-K199 option) (see ordering information)
Multi ATV predefined
Modulation
Standard PAL B/G
Standard PAL B/G + NICAM
in line with country-specific standards and
MBRAI
standards
signals
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
left
right
group delay precorrection
residual carrier
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
B/G, B/G N, I, D/K, M/N, L
one defined ATV signal per standard
in line with MBRAI PAL B/G with A2
PAL B/G – color bar 75 %
see below
FM 50 kHz deviation/5.5 MHz/13 dB
FM 50 kHz deviation/5.742 MHz/20 dB
stereo
1 kHz
1 kHz
CCIR B/G Germany
10 %
in line with MBRAI PAL B/G with NICAM
PAL B/G – color bar 75 %
see below
FM 50 kHz deviation/5.5 MHz/13 dB
NICAM8 roll-off = 40 %/5.85 MHz/20 dB
mono
1 kHz
CCIR B/G Germany
10 %
8 Simulation of NICAM spectrum by means of PN sequence and appropriate pulse shaping.
22
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
Standard PAL I
Standard PAL D/K
Standard NTSC M
Standard SECAM L
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
left
right
group delay precorrection
residual carrier
video test signal
insertion test signal structure
sound subcarrier
audio coding
left
right
group delay precorrection
residual carrier
implementation
video test signal
insertion test signal structure
sound subcarrier
sound 1
sound 2
audio coding
sound 1
sound 2
group delay precorrection
residual carrier
in line with MBRAI PAL I1
PAL I – color bar 75 %
see below
FM 50 kHz deviation/6.0 MHz/13 dB
NICAM8 roll-off = 100 %/6.552 MHz/20 dB
mono
1 kHz
flat
20 %
PAL D/K – FuBK9
see below
FM 50 kHz deviation/6.5 MHz/13 dB
FM 50 kHz deviation/6.74 MHz/20 dB
stereo
1 kHz
1 kHz
flat
12.5 %
NTSC M – color bar 75 % with PLUGE
see below
BTSC/ FM 73 kHz deviation/4.5 MHz/20 dB
stereo + SAP
0.4 kHz
0.4 kHz
5 MHz/FCC
12 %
in line with MBRAI SECAM L
SECAM L – color bar 75 %
see below
NICAM8 roll-off = 40 %/5.85 MHz/27 dB
AM modulation depth = 54 %/6.5 MHz/10 dB
mono
1 kHz
flat
3%
Insertion test signal structure
Insertion test signal structure
Standards B/G,B/G N, I, D/K
Standard IEC 62002 with
2 CH. PAL B (MBRAI)
2 CH. PAL G (MBRAI)
2 CH. PAL B N (MBRAI)
2 CH. PAL G N (MBRAI)
2 CH. PAL I1 (MBRAI)
DVB-T + PAL B (MBRAI)
DVB-T + PAL G (MBRAI)
DVB-T + PAL B N (MBRAI),
DVB-T + PAL G N (MBRAI)
DVB-T + PAL I1 (MBRAI)
Standards M/N
in line with country-specific standards
first field
lines 8, 10
line 16
lines 17, 18
line 19
lines 20, 21
second field
line 323
line 329
lines 330, 331
line 332
line 333
lines 334, 335
first field
line 17
line 18
second field
line 17
line 18
2T pulse
data line 1
CCIR17
CCIR18/2
teletext test line
teletext test line
data line 2
CCIR330/5
CCIR331/1
sinx/x
teletext test line
NTC7 composite
FCC composite
NTC7 combined
sinx/x
9 FuBK: Federal German authority for television transmission.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
23
Standards L and
standard IEC 62002 with
DVB-T + SECAM L (MBRAI),
2 CH. SECAM L (MBRAI)
first field
lines 7 to 14
line 15
line 17
line 18
second field
lines 320 to 328
line 330
lines 331, 332
line 333
discriminating signal
teletext test line
CCIR17
CCIR18, 6 multiburst packets
discriminating signal
CCIR330
CCIR331
CCIR331/1
MBRAI signal combinations
Signal combinations
Digital/analog multi-interferer
Analog multi-interferer
in line with IEC 62002 (MBRAI)
pattern L1
digital N+2/analog N+4 signal
pattern L2
2 analog N+2 / N+4 signals
DVB-T + PAL B (MBRAI)
DVB-T + PAL G (MBRAI)
DVB-T + PAL B N (MBRAI)
DVB-T + PAL G N (MBRAI)
DVB-T + PAL I1 (MBRAI)
DVB-T + SECAM L (MBRAI)
2 CH. PAL B (MBRAI)
2 CH. PAL G (MBRAI)
2 CH. PAL B N (MBRAI)
2 CH. PAL G N (MBRAI)
2 CH. PAL I1 (MBRAI)
2 CH. SECAM L (MBRAI)
Simulation
Arbitrary waveform generator (R&S®SFU-K35 option) (see ordering information)
Waveform memory
Clock generation
Interpolation
Trigger
length
resolution
loading time for 10 Msample
nonvolatile memory
clock rate
accuracy
operating mode
frequency accuracy (internal)
bandwidth
with clock rate = 100 MHz
(no interpolation), bandwidth 0.1 dB
with clock rate <100 MHz,
bandwidth −0.1 dB
sampling rate
operating mode
source
delay
inhibit
position
delay
Marker
Special function
512 sample to 128 Msample
in one-sample steps
16 bit
3s
hard disk
400 Hz to 100 MHz
0.001 Hz
internal
accuracy of reference frequency
40 MHz
0.31 × clock rate
automatically interpolated to the internal
100 MHz data rate
auto, retrigger, armed auto, armed
retrigger
internal, external
32
settable from 0 to 2 -1 samples
32
settable from 0 to 2 -1 samples
restart waveform
settable from 0 to waveform length in
samples
®
TM
can be used with R&S WinIQSIM 10
10 With R&S®WinIQSIMTM: Software version 4.24 or later supports the download of I/Q data and the control of the R&S®SFU-K35.
24
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
T-DMB/DAB waveforms (R&S®SFU-K351 option)
T-DMB/DAB waveforms
Transmission
Signal set
Special function
I/Q sequences with audio and video contents for details see description of option
modulation
I, II
video
resolution
CIF (352 × 288), QCIF (176 × 144),
QVGA (320 × 240)
diver, fishes
sequences
background music
audio
audio program service
1 kHz sinewave
signal
0 dBFS
level
48 kHz
sampling rate
stereo
mode
192 kbit/s
data rate
®
Gaussian fading profiles
R&S SFU-K32 option included, can be
®
used with R&S SFU-B30 option
DVB-H waveforms (R&S®SFU-K352 option)
DVB-H waveforms
Transmission
Signal set
I/Q sequences with audio and video
contents
mode
video/audio
for details see description of option
different DVB-H modes
different resolutions and sequences
DRM waveforms (R&S®SFU-K353 option)
DRM waveforms
Transmission
Signal set
I/Q sequences with audio contents
mode
constellation
bandwidth
sampling rate
audio
signal
level
mode
coding
data rate
for details see description of option
A, B, C, and D
4QAM, 16QAM, and 64QAM (OFDM)
4.5 kHz, 5 kHz, 9 kHz, 10 kHz, 18 kHz,
20 kHz
12 kHz, 48 kHz
different sequences
–10 dBFS, –12 dBFS
mono
MPEG-4 AAC, MPEG-4 CELP
4.8 kbit/s to 30.6 kbit/s
DTV interferers (R&S®SFU-K354 option)
DTV interferers
Waveforms
Signal set
DVB-T standard
ATSC/8VSB standard
Version 06.00, August 2007
I/Q sequences in line with country-specific for details see description of option
standards,
IEC 62002 MBRAI, NORDIG, Dbook, A.74
length
512 sample to 128 Msample
resolution
16 bit
loading time for 64 Msample
20 s
nonvolatile memory
hard disk
standards
DVB-T, ATSC/8VSB, T-DMB/DAB,
TM
MediaFLO , ISDB-T, ISDB-TSB, FM
length
superframe
single-interferer sequence
bandwidths
5 MHz, 6 MHz, 7 MHz, and 8 MHz
FFT mode
8k
constellation
16QAM
code rate
2/3
guard interval
1/8
multi-interferer sequence
pattern
pattern L3 (2 DVB-T signals N+2/N+4)
bandwidth
8 MHz
FFT mode
8k
constellation
16QAM
code rate
2/3
guard interval
1/8
length
1 data frame
sequences
center frequency, pilot frequency
®
R&S SFU Broadcast Test System
25
T-DMB/DAB standard
length
mode
channel bandwidth
single-interferer sequence
multi-interferer sequence
two channels
frame
mode I
8 MHz
center frequency
four channels
length
bandwidth
length
A, D, with frequency gap B, C,
A, C, with frequency gap B, D with
frequency offset 1.712 MHz,
A, B, with frequency gap C, D, with
frequency offset 3.424 MHz
A, B, C, with frequency offset 1.712 MHz,
A, C, D, with frequency gap B,
A, B, D, with frequency gap C,
A, B, C, D
1s
6 MHz
approx. 231 ms
single-interferer sequence
OFDM segments
13
length
approx. 202 ms, 231 ms
single-interferer sequence
OFDM segments
1, 3
length
frame
single-interferer sequence
FM jammer
infinite seamless
three channels
TM
MediaFLO
standard
Standard ISDB-T
Standard ISDB-TSB
Standard FM
frequency
1 kHz
±50 kHz (in line with GSM900 TX)
frequency deviation
MediaFLOTM waveforms (R&S®SFU-K355 option)
TM
MediaFLO waveforms
Transmission
Signal set
TM
I/Q sequences in line with MediaFLO
content
length
bandwidth
wide area ID
local area ID
data
for details see description of option
data
6 superframes, 6 seconds
6MHz
15
10 and 15
TM
several MediaFLO IDs with different TX
modes depending on sequence
Cable interferers (R&S®SFU-K356 option)
Cable interferers
Signal set
I/Q sequences in line with country-specific
standards: SCTE 40 etc
standards
Standard J.83/B
sequences
Standard M/N
sequences
for details see description of option
digital: J.83/B
analog: M/N
64QAM, 256QAM:
digital/digital
analog/analog
Interferer management (R&S®SFU-K37 option)
Interferer
mode
bandwidth
level setting range
frequency offset
points for adding interferer signals
Signal set
ARB, ATV predefined, analog I/Q,
digital I/Q
<±40 MHz (referenced to useful signal)
–60 dB to +60 dB (relative to useful
signal)11
–40 MHz to +40 MHz (relative to useful
signal frequency)
before noise addition/after noise addition
activated options, waveforms and
interferers, customer-specific waveforms
11 High interferer power is at the expense of diminished useful signal values.
26
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
AWGN noise (R&S®SFU-K40 option)
RF bandwidth
Noise
3 dB spectrum (AWGN)
density distribution function
crest factor
setting range
resolution
uncertainty for system bandwidth =
symbol rate and C/N <20 dB
(bandwidth for calculating the noise
power)
range
C/N
System bandwidth
>96 MHz
Gaussian, statistical, separate for I and Q
18 dB
–30 dB to +60 dB
0.1 dB
<0.2 dB
100 kHz to 80 MHz
®
Phase noise (R&S SFU-K41 option)
Phase noise
System bandwidth
Profile files
frequency response
amplitude at fcarrier ±100 Hz
setting range
resolution
max. phase angle
density distribution function
sampling rate
phase noise masks
format
Special function
selection from profile files
–10.0 dBc/Hz to –110.0 dBc/Hz,
depending on selected profile
0.1 dB
±180°
Gaussian
10 MHz
min. 8 predefined files
text files, editable
customer-specific files can be used
Impulsive noise (R&S®SFU-K42 option)
Pulsed addition of an AWGN signal to the useful signal with settable number of pulses per frame and within settable limits of randomly
distributed pulse intervals.
AWGN signal (not pulsed)
Pulse generator
Frame
Pulse
Pulses per frame
Minimum pulse interval
Maximum pulse interval
Distribution of pulse intervals
®
data
see R&S SFU-K40 option
duration
duration
setting range
for number of pulses >1
setting range
resolution
for number of pulses >1
setting range
resolution
function
10 ms, 100 ms, 1000 ms
0.25 µs, fixed
1 to 40000
0.25 µs to 16 ms
0.25 µs
0.25 µs to 16 ms
0.25 µs
PRBS
Multinoise use (R&S®SFU-K43 option) (see ordering information)
Selectable noise sources can be combined to form a cumulative noise signal, which is then added to the useful signal. The C/N and
®
level can be set for the overall signal. R&S SFU broadcast test systems delivered before May 2006 require a hardware
12.
extension
®
Signal sources
AWGN noise
see R&S SFU-K40 option
®
see R&S SFU-K41 option
phase noise
®
see R&S SFU-K42 option
impulsive noise
Cumulative signal
signal sources that can be combined
depending on options installed
AWGN noise
addition can be activated
phase noise
addition can be activated
impulsive noise
addition can be activated
C/N setting for cumulative signal
setting range
–30 dB to +60 dB
resolution
0.1 dB
uncertainty for system bandwidth =
<0.2 dB
symbol rate and C/N <20 dB
12 Check in SETUP -> HARDWARE INFO. Status of installed hardware extension: D/A Converter Board 2110.3406 model .03 required.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
27
Fading simulator (R&S®SFU-B30 option)
Number of paths
®
with R&S SFU-B31 option
System bandwidth
Path loss
Path delay
Delay groups
Speed range
Doppler frequency range
range
resolution
accuracy
range
resolution
®
with R&S SFU-K30 option
maximum number
®
with R&S SFU-B30 option
®
with R&S SFU-B31 option
allowed delay differences
range
accuracy
setting range
accuracy
Restart
Insertion loss
Correlation
correlation
correlation coefficient
setting range
resolution
correlation phase
setting range
resolution
20
40
80 MHz
0 dB to 50 dB
0.01 dB
<0.01 dB
0 ms to 5.242 ms
10 ns
0.01 ns
4
8
<40 µs per group
0 km/h to 1725 km/h for 1 GHz
<0.128 %
0 Hz to 1600 Hz
<0.1 %
automatic, manual
–3 dB to 18 dB, automatic or user-defined,
with clipping indication
®
with R&S SFU-B31 option; two faded
channels can be correlated in pairs
0 % to 100 %
5%
0° to 360°
1°
Fading profiles
Pure Doppler
Static and constant phase
Rayleigh fading
Rice fading
GAUSSDOPPLER (PI profile)
frequency ratio
resolution
path loss
phase
resolution
pseudo noise interval
combination of Rayleigh fading and pure
Doppler
power ratio13
amplitude distribution
power density function
GAUSS0_1 (PO profile)
amplitude distribution
power density function
GAUSS0_08 (VU30, MR100 profile)
amplitude distribution
power density function
Lognormal fading
standard deviation
resolution
local constant
(–1 to +1) × current Doppler frequency
0.01 × current Doppler frequency
0 dB to 50 dB
0° to 360°
1°
>93 h
–30 dB to +30 dB
pseudo noise interval >93 h
S( τi,f) = G (0.1A; 0; 0.08fd)+δ(f-0.5fd)
pseudo noise interval >93 h
S( τi,f) = G (A; f; 0.08fd)
pseudo noise interval >93 h
S( τi,f) = G (A; f; 0.1fd)
0 dB to 12 dB
1 dB
12 m to 200 m for fRF = 1 GHz
13 Ratio of discrete component to distributed component.
28
®
R&S SFU Broadcast Test System
Version 06.00, August 2007
Enhanced fading (R&S®SFU-K30 option) (see ordering information)
30 MHz fine delay mode
50 MHz fine delay mode
Moving delay mode
Birth-death mode
Two-path dynamic delay
number of paths
system bandwidth
path delay
resolution
number of paths
system bandwidth
path delay
resolution
system bandwidth
fading
number of fading paths
profile
reference path
delay
resolution
moving delay path
mean delay
delay variation
resolution
variation period
system bandwidth
fading
number of fading paths
profile
speed range
Doppler frequency range
delay
minimum delay
delay grid
resolution
grid positions
hopping parameters
start offset
hopping dwell time
total (start offset + hopping dwell time)
resolution
system bandwidth
fading
number of fading paths
moving mode
hopping positions
sliding function
profile
speed range
Doppler frequency range
delay
reference path (statistically in delay)
moving path
minimum delay
maximum delay
resolution
hopping dwell time
sliding period
resolution
®
12, 24 (with R&S SFU-B31 option)
30 MHz
®
see R&S SFU-B30 option
0.01 ns
®
8, 16 (with R&S SFU-B31 option)
50 MHz
®
see R&S SFU-B30 option
0.01 ns
50 MHz
2 per signal path
none
0 µs to 40 µs
10 ns
150 ns to 39.85 µs
0.3 µs to 40 µs
10 ns
10 s to 500 s in steps of 100 ms
50 MHz
2 per signal path
pure Doppler
see R&S SFU-B30 option
see R&S SFU-B30 option
0 µs to 40 µs14
14
100 ns to 40/3 µs
1 ns
14
3 to 50
0 s to 429 s
1 ms to 429 s
max. 429 s
100 ns
50 MHz
2 per signal path
hopping/sliding
2/alternating
sinusoidal
static, pure Doppler, Rayleigh
see R&S SFU-B30 option
see R&S SFU-B30 option
0 s to 1638.00 µs
0 s to 1000.00 µs
0 s to 1000.00 µs
10 ns
100 ms to 10 s
50 s to 1000 s
10 ms
14 The maximum delay range of 40 µs may not be exceeded.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
29
Gaussian fading (R&S®SFU-K32 option) (see ordering information)
Additional fading profiles
Gaus1
in line with EN 50248
amplitude distribution
power density function
Gaus2
amplitude distribution
power density function
GausDAB
amplitude distribution
power density function
pseudo noise interval >93 h
S( τi,f) = G (A, –0.8fd, 0.05fd) + G (A1,
+0.4fd, 0.1fd), where A1 is 10 dB less than
A
pseudo noise interval >93 h
S( τi,f) = G (B, +0.7fd, 0.1fd) + G (B1,
–0.4fd, 0.15fd), where B1 is 15 dB less
than B
pseudo noise interval >93 h
S( τi,f) = G (A, ±0.7fd, 0.1fd)
where +0.7fd is used for paths of even
path number, and
–0.7fd is used for paths of uneven path
number;
path 1 is an exception and is
parameterized with +0.7fd
BER measurements (R&S®SFU-K60 option)
For DVB-S2, DIRECTV, DMB-TH, and MediaFLO™, BER measurements cannot be performed at all or only to a limited extent.
BER measurements
for all digital modulation modes
Display
measured value
BER
error count
measurement time
Start/restart
manual
PRBS measurements
Inputs for BER clock, BER data, BER
connectors
BNC female, rear
enable
input impedance
50 Ω
input level
HCT
BER data
input data rate
up to 90 Mbit/s
23
15
PRBS
2 –1 / 2 –1 (in line with ITU-T O.151)
BER clock, BER data
polarity
normal, inverted
BER enable
always, active high, active low
Output for BER error
connector
BNC female, rear
output impedance
50 Ω
output level
HCT
MPEG-2 TS measurements
Input
input interfaces
ASI, SPI (stuffing off), SMPTE 310 (see
MPEG-2 inputs)
input signal
TS packet (see “Internal test signals”)
23
15
payload (PRBS in line with ITU-T O.151)
2 –1 / 2 –1
NULL (1FFF (hex)), variable
PID
DATA VALID
applicable to SPI interface
active
always
Trigger inputs/outputs
Triggers and connections reserved for future use
Triggers 1 to 10 IN/OUT
Main trigger IN
Main trigger OUT
Main trigger OUT
30
®
R&S SFU Broadcast Test System
connector
input impedance
load resistor
input/output level
connector
input impedance
input level
connector
load resistor
output level
D-Sub female, 25 pins, rear
high impedance
>200 Ω
HCT
BNC female, rear
50 Ω
HCT
BNC female, rear
>200 Ω
HCT
Version 06.00, August 2007
General data
System data
System
Local control
External control
Remote control
Connectors
operating system
memories for settings
display
controls
controls
command set
IEC/IEEE
address range
IEC/IEEE interface functions
Ethernet
USB
IEC/IEEE
Ethernet
USB
AC supply input
PC platform
Windows XP Embedded
internal hard disk
50
XVGA 1024 × 768
rotary knob, hardkeys, and softkeys
external mouse and keyboard via USB
SCPI 1999.5
IEC 60625 (IEEE 488)
1 to 30
SH1, AH1, T6, L4, SR1, RL1, PP1, DC1,
DT1, C0
10/100BaseT
1.1 (full speed)
Amphenol, 24 pins, rear
RJ-45, rear
USB, front and rear
IEC 60320 C14, rear
Operating data
Power supply
input voltage range,
AC, nominal
AC supply frequency
power factor correction
EMC
Immunity to interfering field strength
Environmental conditions
operating temperature range
Mechanical resistance
storage temperature range
climatic resistance, 95 % rel. humidity,
cyclic test at +25 °C/+40 °C
vibration, sinusoidal
vibration, random
shock
Electrical safety
Dimensions
Weight
W×H×D
W×H×D
fully equipped
fully equipped
Recommended calibration interval
Standard warranty period
100 V to 240 V
3.6 A to 1.3 A
47 Hz to 63 Hz
in line with EN 61000-3-2
in line with EN 55011 class B,
EN 61326
up to 10 V/m
+5 °C to +45 °C15
in line with EN 60068-2-1,
EN 60068-2-2
–20 °C to +60 °C
in line with EN 60068-2-3,
EN 60068-2-30
5 Hz to 150 Hz, max. 2 g at 55 Hz,
55 Hz to 150 Hz, 0.5 g const.,
in line with EN 60068-2-6
10 Hz to 300 Hz, acceleration 1.2 g (rms),
in line with EN 60068-2-64
40 g shock spectrum,
in line with EN 60068-2-27, MIL-STD-810E
in line with IEC 61010-1, 61010-1, and
UL 61010B-1, CSA C22.2 No. 1010.1
435 mm × 192 mm × 460 mm (4 HU)
17.14 in × 7.56 in × 18.12 in (4 HU)
15 kg
33.1 lb
3 years
1 year
15 Reduced brightness of LCD at higher operating temperatures.
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
31
Ordering information
®
®
Option identification: R&S SFU-Bxy = hardware option, R&S SFU-Kxy = software option.
®
®
Delivery of R&S SFU base unit only with at least one coder or with the R&S SFU-K81 option installed.
®
If the R&S SFU-K81 option is installed, no digital or analog modulation system can be used.
Designation
Type
Order No.
Broadcast Test System
R&S®SFU
2110.2500.02
®
2110.7960.02
®
2110.7976.02
®
2110.8008.02
®
2110.7301.02
2110.7324.02
2110.7330.02
2110.7399.02
®
2110.7353.02
2110.7776.02
2110.7360.02
2110.7376.02
2110.7524.02
®
2110.7518.02
only on request
®
2110.7760.02
®
2110.7401.02
®
only on request
®
2110.7424.02
2110.7747.02
®
2110.8050.02
®
2110.8037.02
®
2110.8043.02
®
2110.8066.02
®
2110.8072.02
®
2110.8089.02
®
2110.7430.02
including power cable, hardcopy of quick start guide,
CD-ROM (includes operating manuals and quick start
guide)
Options
Basic configuration
Realtime Disabled
(option available only at initial delivery)
Realtime Enabled
®
(only if R&S SFU-K81 is installed)
RF path
High Power and Overvoltage Protection
R&S SFU-K81
R&S SFU-K82
R&S SFU-B90
Digital modulation systems
DVB-T/H Coder
DVB-C/ISDB-C Coder
DVB-S/DVB-DSNG Coder
DVB-S2 Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10)
ATSC/8VSB Coder
ATSC/A-VSB Coder
J.83/B Coder
ISDB-T/ISDTV/ISDB-TSB Coder
TM
MediaFLO Coder
®
(requires an installed R&S SFU-B10)
T-DMB/DAB Coder including Gaussian fading profiles
DMB-T (TDS-OFDM) Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10)
DTMB/DMB-TH (TDS-OFDM) Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10)
DIRECTV Legacy Modulation Coder
®
®
(requires an installed R&S SFU-B1 or R&S SFU-B10)
AMC Coder
®
(requires an installed R&S SFU-K8 (DVB-S2)
®
®
and an installed R&S SFU-B1 or R&S SFU-B10)
Coder Extension 1
Coder Extension 10
Analog modulation systems
ATV Standard B/G Coder
®
(requires an installed R&S SFU-B2)
ATV Standard D/K Coder
®
(requires an installed R&S SFU-B2)
ATV Standard I Coder
®
(requires an installed R&S SFU-B2)
ATV Standard M/N Coder
®
(requires an installed R&S SFU-B2)
ATV Standard L Coder
®
(requires an installed R&S SFU-B2)
Multi ATV Predefined
®
(requires an installed R&S SFU-B3)
Coder Extension 2
®
preinstalled in R&S SFU from serial no. 101000
32
®
R&S SFU Broadcast Test System
R&S SFU-K1
®
R&S SFU-K2
®
R&S SFU-K3
®
R&S SFU-K8
R&S SFU-K4
®
R&S SFU-K14
®
R&S SFU-K5
®
R&S SFU-K6
®
R&S SFU-K10
R&S SFU-K11
®
R&S SFU-K7
R&S SFU-K12
R&S SFU-K9
R&S SFU-K108
R&S SFU-B1
®
R&S SFU-B10
R&S SFU-K190
R&S SFU-K191
R&S SFU-K192
R&S SFU-K193
R&S SFU-K194
R&S SFU-K199
R&S SFU-B2
Version 06.00, August 2007
Simulation
Fading Simulator
Fading Simulator Extension to 40 Paths
®
(requires an installed R&S SFU-B30)
Enhanced Fading
®
(requires an installed R&S SFU-B30)
DAB Gaussian Fading
®
(requires an installed R&S SFU-B30)
®
®
(included in R&S SFU-K11 and R&S SFU-K351)
ARB Generator
(requires an installed R&S SFU-B3)
Memory Extension 1
preinstalled in R&S SFU from serial no. 101000
T-DMB/DAB Waveforms incl. Gaussian fading profiles
(requires an installed R&S SFU-K35 and, for using
Gaussian fading profiles, an installed R&S SFU-B30)
DVB-H Waveforms
(can be used with R&S SFU-K35)
DRM Waveforms
(can be used with R&S SFU-K35)
DTV Interferers
(can be used with R&S SFU-K35)
TM
MediaFLO Waveforms
(can be used with R&S SFU-K35)
Cable Interferers
(can be used with R&S SFU-K35)
Interferer Management
AWGN Noise
Phase Noise
Impulsive Noise
Multinoise Use
(requires at least one installed R&S SFU-K40,
R&S SFU-K41, or R&S SFU-K42)
Baseband inputs/outputs
®
2110.7530.02
2110.7547.02
®
2110.7560.02
®
2110.7630.02
®
2110.7601.02
®
2110.7447.02
®
2110.4277.02
®
2110.4425.02
®
2110.4554.02
®
2110.4690.02
®
2110.2974.02
®
2110.3212.02
®
2110.7647.02
2110.7653.02
2110.7660.02
2110.7676.02
2110.7682.02
®
2110.7953.02
2110.7553.03
®
2110.7476.02
2085.8704.02
®
2085.7708.02
®
2085.7650.02
®
2085.9052.02
®
2085.9146.02
®
2110.7499.02
®
2110.7482.02
®
2110.7453.02
2110.7501.02
®
2110.7501.03
®
2110.4348.02
R&S SFU-B30
®
R&S SFU-B31
R&S SFU-K30
R&S SFU-K32
R&S SFU-K35
R&S SFU-B3
R&S SFU-K351
R&S SFU-K352
R&S SFU-K353
R&S SFU-K354
R&S SFU-K355
R&S SFU-K356
R&S SFU-K37
®
R&S SFU-K40
®
R&S SFU-K41
®
R&S SFU-K42
®
R&S SFU-K43
Extended I/Q
ETI Input/Output
Digital baseband
R&S SFU-K80
®
R&S SFU-B11
TS Generator including SDTV streams
DVB-H Stream Library
®
(requires an installed R&S SFU-K20)
Test Card M Streams
®
(requires an installed R&S SFU-K20)
HDTV Sequences
®
(requires an installed R&S SFU-K20)
H.264 Stream Library
®
(requires an installed R&S SFU-K20)
ISDB-T Stream Library
®
(requires an installed R&S SFU-K20)
TRP Player
®
(requires an installed R&S SFU-B6 and an installed
®
R&S SFU-B4)
TS/ETI Recorder
®
®
(requires an installed R&S SFU-K22, R&S SFU-B6,
®
and R&S SFU-B4)
Memory Extension 2
Additional Hard Disk
for instruments with serial numbers <101000
Additional Hard Disk
for instruments with serial numbers >101000
T-DMB/DAB Streams
®
(requires an installed R&S SFU-K21 or
®
R&S SFU-K22)
R&S SFU-K20
®
R&S DV-DVBH
Version 06.00, August 2007
R&S DV-TCM
R&S DV-HDTV
R&S DV-H264
R&S DV-ISDBT
R&S SFU-K22
R&S SFU-K21
R&S SFU-B4
®
R&S SFU-B6
R&S SFU-B6
R&S SFU-K221
®
R&S SFU Broadcast Test System
33
Analog baseband
Video Generator
®
(included in R&S SFU-K190 to -K194)
ATV Video Signals
®
®
(can be used with R&S SFU-K190 to R&S SFU-K194)
Impedance Matching Pad 75/50 Ohms
®
®
(can be used with R&S SFU-K190 to R&S SFU-K194)
Measurement and analysis functions
®
2110.7799.02
®
2110.4831.02
®
2110.7276.02
®
2110.7782.02
®
2110.7460.02
2110.7699.02
R&S SFU-K23
R&S ATV Video
R&S SFU-Z19
BER Measurements
(cannot be used at all or only to a limited extent for
DVB-S2, DIRECTV, DTMB, DMB-TH, and
MediaFLO™)
Other expansions
R&S SFU-K60
User I/O (additional input/output)
®
Upgrade Kit for R&S SFU-K43
Recommended extras
R&S SFU-B5
®
R&S SFU-U43
Hardcopy of operating manuals; includes quick start
guide (in English)
®
Documentation of R&S SFU Calibration Values
LVDS Cable for digital I/Q input/output (2 m)
Adapter for Telescopic Sliders
Keyboard with USB Interface (US assignment)
Mouse with USB Interface, optical
External USB CD-RW Drive
2110.2522.12
®
R&S SFU-DCV
®
R&S LVDS BU-BU 26POL 2M
®
R&S ZZA-T45
®
R&S PSL-Z2
®
R&S PSL-Z10
®
R&S PSP-B6
2082.0490.30
1130.1302.00
1109.3774.00
1157.6870.03
1157.7060.02
1134.8201.12
Service options
can only be ordered in connection with the purchase of an instrument
One-Year Repair Service
following the warranty period
Two-Year Repair Service
following the warranty period
Four-Year Repair Service
following the warranty period
Two-Year Calibration Service
Three-Year Calibration Service
Five-Year Calibration Service
34
®
R&S SFU Broadcast Test System
®
please contact your local sales
®
please contact your local sales
®
please contact your local sales
®
please contact your local sales
please contact your local sales
please contact your local sales
R&S RO2SFU
R&S RO3SFU
R&S RO5SFU
R&S CO2SFU
®
R&S CO3SFU
®
R&S CO5SFU
Version 06.00, August 2007
Version 06.00, August 2007
®
R&S SFU Broadcast Test System
35
Certified Environmental System
ISO 9001
ISO 14001
DQS REG. NO 1954 QM
DQS REG. NO 1954 UM
For product brochure, see PD 0758.1658.12
and www.rohde-schwarz.com
(search term: SFU)
www.rohde-schwarz.com
Europe: +49 1805 12 4242, [email protected]
Americas: +1-888-837-8772, [email protected]
Asia: +65 65 130 488, [email protected]
¸ is a registered trademark of Rohde & Schwarz GmbH & Co. KG · Trade names are trademarks of the owners · Printed in Germany (bb)
PD 0758.1658.22 · Version 06.00 · August 2007 · ¸SFU · Data without tolerance limits is not binding · Subject to change
Certified Quality System
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement