4542 - Boonton Power Meters RF

4542 - Boonton Power Meters RF
Data Sheet
4540 Peak Power Meter
PRELIMINARY
Taking performance to a new peak
4540 Peak Power Meter
The Boonton model 4540 Series is the instrument of choice for
capturing, displaying and analyzing RF power in both the time
and statistical domains. Applications include pulsed RF signals
such as radar, TDMA and GSM, pseudorandom or noise-like
signals such as CDMA, WLAN and WiMAX.
The 4540 Series is a single or dual channel RF Power Meter that
can measure modulated or CW signals using peak and average
Boonton Power sensors.
The 4540 Series has three operating modes: Pulse, Statistical,
and Modulated/CW. Features include:
• High Bandwidth Wide Dynamic Range Sensors
• Intuitive User Interface
4540 Series Specifications
• 4” color LCD display
Sensor Inputs
• 200 psec time resolution
• Statistical analysis including CCDF
• Text view of 15 time and power measurements
per channel
• GPIB, USB and LAN
RF Channels
1 or 2
RF Frequency Range
1 MHz to 110 GHz*
Peak Pwr range
-55 to +20 dBm*
CW Pwr range
-70 to +44 dBm*
Relative Offset Range
±100.00 dB
Single Shot Bandwidth
5 MHz (based on 10 samples/pulse)
Video BW
70 MHz*
Risetime 7 ns*
* Sensor Dependent, Calibrator Dependent
Acquisition and Measurement System
Time resolution
0.2 ns
A/D Converter
14 bit
DSP
32 bit floating point
Trigger
Ext Trig range, impedance
±5V, 1 Mohm
Min trig pulse width
15 ns
Max trig rate
30 MHz
Calibrator Source
Internal Calibrator
2
50MHz, CW -60 to +20dBm
Pulse Mode Automated Measurements
Pulse and Modulated Mode Marker Measurements
Pulse width
Pulse power
Markers (Vertical Cursors)
Pulse rise-time
Overshoot (dB or %)
Pulse fall-time
Waveform average power
Pulse period
Top level power
Pulse repetition frequency
Bottom level power
Settable in time relative to the trigger
position
Markers Independently
Power at specified times
(Avg., Peak, Min.)
Pair of Marker
Power at two specified times with ratio or average power
Pulse duty cycle
Pulse delay (2 channel instruments only)
between them. The minimum and maximum power between the markers
Pulse off-time
Peak power
and the ratio or average power between them. The average power, peak
Edge delay
power (hold) and peak-to average power ratio between the markers.
Marker Interval
Average, Min, Max, Pk-Avg ratio
Statistical Mode Automated Measurements
Peak power
Power or Percent CCDF at cursor
Environmental Specifications
Average power
Percent
General
Minimum power
Total time (indicated)
Peak to Average ratio
Total number of samples (indicated)
Manufactured to the intent of MILT28800E Type III, Class 5, Style E
CE Mark
Dynamic Range
Conforms to European Community(EU)
specifications
EN 61010-1(90)(+A1/92)(+A2/95)
Modulated Mode
EN 61010-2-031
Filtered Average, Peak and Min. (held or auto-decayed)
EN 61326-1(97)
EN 55022(94)A2/97)ClassB
User I/O Signals
Operating Temperature
0 to 50°C
Sensors
USB device
Ventilation:
Fan Cooled
Calibrator
Recorder/Status Out
Storage Temperature
-40 to 75°C
GPIB
Trigger Out
Humidity:
95% ±5% maximum (non-condensing)
Ethernet (LAN)
3
Other Characteristics
Display type
4” Color LCD (320x240)
Keyboard
22 key, conductive rubber
Dimensions 20.8cm x 8.9cm x 34.3cm
Wireless Telecom Group Inc.
Parsippany, NJ 07054
USA
Tel:
+1 973 386 9696
Fax:
+1 973 386 9191
[email protected]
www.boonton.com
8.2” x 3.5” x 16.5”
Half rack, 2U
Weight
3.5kg / 7.7lbs
Power Supply
Universal Input 80 to 264 VAC, 47 Hz to
63 Hz
Ordering Information
4541
RF Peak Power Analyzer, single channel,
front panel inputs.
4542
Dual channel, front panel inputs
-02
Rear sensor inputs
-03
Calibrator, rear panel output
-30
Warranty extended to 3 years
Wireless Telecom Group
Cheadle Hulme, Cheshire
United Kingdom
Tel:
+44 (0) 161 486 3353
Fax:
+44 (0) 161 486 3354
Wireless Telecom Group
Roissy
France
Tel:
+33 (0) 1 72 02 30 30
Fax:
+33 (0) 1 49 38 01 06
Wireless Telecom Group
Ismaning
Germany
Tel:
+49 (0) 89 996 41 0
Fax:
+49 (0) 89 996 41 440
Recommended Sensors
Peak Power*
Model
Freq. Range
Dynamic Range
Risetime(Bandwidth)
57318
0.5 to 18 GHz
-24 to +20 dBm
<15 ns (35 MHz)
57518
0.1 to 18 GHz
-40 to +20 dBm
<100 ns (6 MHz)
CW Power*
Model
Freq. Range
Dynamic Range
51075A
500 kHz to 18 GHz
-70 to +20 dBm
*other types @ www.boonton.com/products.html/
Wireless Telecom Group.
Singapore
Tel:
+65 6827 9670
Fax:
+65 6827 9601
Wireless Telecom Group
Shanghai
China
Tel:
+86 21 5835 8039
Fax:
+86 21 5835 5238
Boonton
A Wireless Telecom Group Company
All rights reserved.
Note: Specifications, terms and conditions are
subject to change without prior notice.
4
B/4540/0408/EN­
© Copyright 2008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement