BenQ | PB7100 - SVGA DLP Projector | User`s manual | BenQ PB7100 - SVGA DLP Projector User`s manual

PB7200
BenQ PB7220
PB7100
User’s Manual
Copyright
Copyright © 2003 by BENQ Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission of BENQ Corporation.
Disclaimer
BENQ Corporation makes no representations or warranties, either expressed or implied,
with respect to the contents hereof and specifically disclaims any warranties,
merchantability or fitness for any particular purpose. Furthermore, BENQ Corporation
reserves the right to revise this publication and to make changes from time to time in the
contents hereof without obligation of BENQ Corporation to notify any person of such
revision or changes.
Fill this in!!
In case service is needed in the future, record the information described below. The
serial number is on the back of the product.
Projector Information
Product Name:
PB7200/ PB7220/ PB7100
Serial Number:
Date of Purchase:
Dealer Information
Dealer:
Telephone
Number:
Address:
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Shipping Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Alternative Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Projector Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
External Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote Control Effective Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing or Replacing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting to Various Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Digital Keystone Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Source Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
1. Display Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2. Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Source Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5. PIP Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Lamp Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Use and Replacement of the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Lamp Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Resetting Lamp Hours. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Temp Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
LED Indicator Status & Illustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Table of Contents
iii
BenQ PB7200/ PB7220/ PB7100 Manual
llustration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Accessories (included in the standard package) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Alternative Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Optional Accessories (not included in the standard package) . . . . . . . . . . . . . . . . 26
Ordering Parts or Getting Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Common Problems & Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Projector Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Timing Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
EEC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
iv
Table of Contents
BenQ PB7200/ PB7220/ PB7100 User’s Manual
INTRODUCTION
Caution
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. PLEASE READ THIS USER’S MANUAL BEFORE YOU
OPERATE YOUR PROJECTOR. SAVE THIS USER’S MANUAL FOR
FUTURE REFERENCE .
Safety Instructions
1.
Read this user’s manual before you operate your projector and save it for future
reference.
2.
The lamp becomes extremely hot during operation. Allow the projector to cool
for approximately 45 minutes prior to removing the lamp assembly for
replacement. Do not operate lamps beyond the rated lamp life. Excessive
operation of lamps beyond the rated life could cause them to explode on rare
occasions.
3.
Never replace the lamp assembly or any electronic components unless the
projector is unplugged.
4.
To reduce the risk of electric shock, do not disassemble this appliance. Take it to a
qualified technician when service or repair is required. Incorrect reassembly can
cause electric shock when the appliance is subsequently used.
5.
Do not place this product on an unstable cart, stand, or table. The product may
fall, sustaining serious damage.
6.
This product is capable of displaying inverted images for ceiling mount installation.
Please use suitable equipment for mounting the unit and ensure it is securely
installed.
•
Always open the lens shutter or remove the lens cap when the projector
lamp is on.
Do not look straight at the projector lens during operation. The intense
light beam may damage your eyes.
In some countries, the line voltage is NOT stable. This projector is
designed to operate safely within a bandwidth of 110 to 230 volts, but
could fail if power cuts or surges of more than10 volts occur. In these
high-risk areas, it is recommended that a power stabilizer unit be used in
conjuction with this projector.
Caution
•
•
Introduction
1
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Shipping Contents
The projector is shipped with the cables required for connection to standard PC or
laptop computers. Carefully unpack and verify that you have all the items shown below.
If any of these items are missing, please contact personnel at the place of purchase.
User’s Manual
Projector
Quick Start Card Warranty Booklet
User’s
Manual CD
HDTV Cable
Remote
Control
Audio Cables
S-Video
Cable
Batteries
Soft Carry Case
VGA Cable
USB Cable
Alternative Accessories
For the US:
Power Cord and 3-2
Converter
For UK and
EU countries:
220V and
240V Power
Cords
3-2 Converter
Optional Accessories
2
1.
Macintosh adapter
2.
250W lamp module
3.
Ceiling mount kit
Introduction
Video Cable
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Projector Description
Projector
11
Audio jack
2
External control panel
(see next page)
Projection lens
12
USB mouse connector
3
Front adjuster
13
S-Video jack
4
IR remote sensor
14
RS 232 control port
5
Ventilation grill
15
AC power cord inlet
6
Speaker
16
Main power switch
7
Projection lens adjuster
17
Rear adjuster feet
8
RGB (PC/ Mac) signal input - 1
18
Kensington lock slot
9
RGB (PC/ YPbPr/ YCbCr) signal input
-2
Video connector
19
Lamp door
1
10
Introduction
3
BenQ PB7200/ PB7220/ PB7100 User’s Manual
External Control Panel
1 Power
Presses the Power key to turn the
projector on or off.
2 Source
Selects signal sources from among RGB1, RGB-2, YPbPr, S-Video and Video.
4 Exit 5 Right 6 Menu
Menu will display the menu system on
screen. Press Menu again to access the
sub-menus. Left and Right help you
navigate among choices and settings in
the menus and sub-menus. However,
when the on-screen menu is not
activated, the Left and Right buttons
will function as Keystone -/+ hot keys.
Press the Exit button to go back to the
main menu. Press Exit again to leave the
menu system.
3 Left
7 Auto
Automatically determines the best
picture settings for current received
signals.
4
Introduction
8 Blank
Uses Blank to hide the screen image.
You can unseal the image gradually by
using the mouse of the remote control,
or simply press Blank to turn on the
image immediately.
9 Power indicator
It will light up or flash when the projector
is under operation.
10
Temp indicator
The Temp indicator will flash when the
system temperature is too high, which
may occur if the projector is operated
improperly. See "Temp Information" on
page 24 for more detailed information.
11
Lamp indicator
The Lamp Indicator will light up when the
lamp needs service or replacement. See
“Lamp Information” on page 22 for more
detailed information.
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Adjuster
The projector is equipped with 1 quick-release adjuster foot. Push the button to adjust
its tilt angle.
1.
Lift the projector up and press the adjuster button to release the adjuster.
2.
The adjuster will drop into position and be locked.
Projector Features
The projector integrates high-performance optical engine projection and a user-friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
•
Small and light for portability
•
Full-function remote control with laser pointer/ remote mouse function
•
High quality manual zoom lens
•
One-key auto-adjustment to display the best picture quality
•
Digital keystone correction to correct distorted images
•
Adjustable color balance control for data/video display
•
Ultra-high brightness projection lamp
•
Ability to display 16.7 million colors
•
On-screen menus in 8 languages: English, French, German, Italian, Spanish, Korean,
Traditional Chinese and Simplified Chinese.
•
Switchable Normal/ Economic mode to adjust the power consumption
•
Powerful AV function to provide high quality AV picture
•
HDTV compatibility (YPbPr)
Note: The brightness of the projected image will vary depending on the
ambient lighting conditions and contrast/brightness settings.
Introduction
5
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Remote Control Description
Power
LED
Menu
3 Left/ Keystone 4 Right/ Keystone +
Auto
L-Click/ R-click
Zoom in/ out
By pressing ZOOM IN +, the center
of the picture will be magnified.
When the + button is pressed again,
the picture is further magnified, up
to four times the original size. By
pressing ZOOM OUT -, the size of
the image is reduced. When the button is pressed again, the picture
is further reduced until it is restored
to its original size. To return to the
normal display mode, press the
RETURN button. (This function can
be used in combination with
FREEZE. )
Laser Pointer
Source
Exit
Blank
Mouse Pad
Drag
Volume +/Mute
PIP Source
PIP Pos.
PIP Size
By pressing the PIP-Source,
PIP-Pos and PIP-Size hotkeys,
you can enable the PIP
(Picture In Picture) function
and choose the position and
size of the PIP image.
Return
Ratio
Freeze
The image is frozen when FREEZE is pressed. A “Pause” icon
will appear in the lower right corner of the screen. To stop
the freeze function, press the FREEZE button, RETURN
button or SOURCE button (when the input source is
switched over during display) again.
6
Introduction
By pressing the Ratio hotkey,
you can select the screen
aspect ratio you prefer:
4:3,16:9 or 1:1.
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Remote Control Effective Range
The remote sensors are located on the front and the back of the projector. It can
function in a range of 30 degrees horizontally and 30 degrees vertically relative to a line
that is a right angle to the remote sensors. The distance between the remote control
and the remote sensors must be shorter than 6 meters (19.5 feet).
Installing or Replacing Batteries
1
Push and open the
battery
compartment lid in
the direction shown.
2
Install batteries as
indicated by the
diagram inside the
compartment.
3
Position the lid
over the
compartment and
snap it back into
place.
Caution
Avoid excessive heat and humidity. There may be danger of an explosion if
batteries are incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Introduction
7
BenQ PB7200/ PB7220/ PB7100 User’s Manual
INSTALLATION
Screen Size
Place the projector at the required distance from the screen according to the desired
picture size (see the table below).
•
8
PB7200/ PB7220 (XGA) screen size chart
Diagonal measurement
Minimum
Maximum
zoom
zoom
inches feet inches feet inches
48
2.49 29.9 3.05 36.6
72
3.73 44.8 4.57 54.9
96
4.98 59.7 6.10 73.2
120
6.22 74.7 7.62 91.4
144
7.47 89.6 9.14 109.7
168
8.71 104.5 10.67 128.0
192
9.96 119.5 12.19 146.3
216 11.20 134.4 13.72 164.6
240 12.45 149.4 15.24 182.9
264 13.69 164.3 16.76 201.2
288 14.94 179.2 18.29 219.5
312 16.18 194.2 19.81 237.7
336 17.42 209.1 21.34 256.0
360 18.67 224.0 22.86 274.3
384 19.91 239.0 24.38 292.6
Distance
from screen
Distance from
screen
feet
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
meters
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
Installation
cm
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
Diagonal measurement
Minimum
Maximum
zoom
zoom
meters cm meters cm
0.62
62.2
0.76
76.2
0.93
93.3
1.14 114.3
1.24 124.5 1.52 152.4
1.56 155.6 1.91 190.5
1.87 186.7 2.29 228.6
2.18 217.8 2.67 266.7
2.49 248.9 3.05 304.8
2.80 280.0 3.43 342.9
3.11 311.2 3.81 381.0
3.42 342.3 4.19 419.1
3.73 373.4 4.57 457.2
4.04 404.5 4.95 495.3
4.36 435.6 5.33 533.4
4.67 466.7 5.72 571.5
4.98 497.8 6.10 609.6
BenQ PB7200/ PB7220/ PB7100 User’s Manual
•
PB7100 (SVGA) screen size chart
Diagonal measurement
Minimum
Maximum
zoom
zoom
inches feet inches feet inches
48
1.96
23.5
2.40
28.7
72
2.93
35.2
3.59
43.1
96
3.91
47.0
4.79
57.5
120
4.89
58.7
5.99
71.9
144
5.87
70.4
7.19
86.2
168
6.85
82.2
8.39 100.6
192
7.83
93.9
9.58 115.0
216
8.80 105.7 10.78 129.4
240
9.78 117.4 11.98 143.7
264 10.76 129.1 13.18 158.1
288 11.74 140.9 14.37 172.5
312 12.72 152.6 15.57 186.9
336 13.70 164.3 16.77 201.2
360 14.67 176.1 17.97 215.6
384 15.65 187.8 19.17 230.0
Distance from
screen
feet
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
Distance from
screen
meters
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
cm
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
Diagonal measurement
Minimum
Maximum
zoom
zoom
meters cm meters cm
0.49
48.9
0.60
59.9
0.73
73.4
0.90
89.8
0.98
97.8
1.20 119.8
1.22 122.3 1.50 149.7
1.47 146.7 1.80 179.7
1.71 171.2 2.10 209.6
1.96 195.7 2.40 239.6
2.20 220.1 2.70 269.5
2.45 244.6 2.99 299.5
2.69 269.0 3.29 329.4
2.93 293.5 3.59 359.4
3.18 317.9 3.89 389.3
3.42 342.4 4.19 419.3
3.67 366.8 4.49 449.2
3.91 391.3 4.79 479.1
Connecting to Various Equipment
HDTV Equipment
The projector is capable of displaying various High Definition TV display modes. Some
of these sources are:
•
Digital-VHS (D-VHS) player
•
DVD player
•
Satellite Dish HDTV receiver
•
DTV tuners
Most of these sources will provide an analog component video output, a standard VGA
output, or a YPbPr (default) format.
The projector is capable of accepting HDTV data through a YPbPr connector. Use a
HDTV cable that came with your projector to display HDTV images.
The following standards are supported in the HDTV function:
•
480i
•
480p
•
720p
•
1080i
Please refer to "Menu System" on page 15 for information on the HDTV OSD
selections.
Installation
9
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Connecting to Various Equipment
It only takes a few seconds to connect your projector to your desktop or notebook
computer, VCR, or other systems. However, a Mac adapter (an optional accessory) is
needed for connection to Macintosh computers.
1.
Notebook/ Computer (Macintosh computer or SOG signal is only supported with
RGB IN-1.)
The USB cable is not needed unless you have a remote control with mouse
functions.
10
2.
DVD player or HDTV can only support with RGB IN-2.
3.
S-video device
Installation
BenQ PB7200/ PB7220/ PB7100 User’s Manual
4.
Video device or VCR
Installation
11
BenQ PB7200/ PB7220/ PB7100 User’s Manual
OPERATION
Start Up
1.
Plug the power cord into the projector and into a wall socket.
2.
Turn on the main power switch.
3.
Press and hold POWER to start the unit. The back-lit POWER key flashes green
and stays green when the power is turned on.
Projector
Remote Control
(When the power is turned off, there is a 90-second cooling period before the
projector can be re-started.)
4.
12
Operation
Switch on all connected equipment.
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Digital Keystone Correction
Keystoning refers to the situation where the projected image is noticeably wider at
either the top or bottom. To correct this, press 3 Left/ Right 4 (hot key) on the
control panel of the projector or KEYSTONE 3/4 on the remote control, and then
adjust the sliding bar labeled Keystone, as needed. Press + to correct keystoning at the
top of the image. Press - to correct keystoning at the bottom of the image.
Projector
Remote control
Auto Adjustment
In some cases, you may need to optimize the picture quality. To do this, press the AUTO
key on the control panel of the projector or on the remote control. Within 3 seconds,
the built-in Intelligent Auto Adjustment function will re-adjust settings to provide the
best picture quality.
Projector
Remote control
Operation
13
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Source Selection
When several input sources are available, press the SOURCE key to make a selection
from the control panel of the projector or the remote control.
Projector
Remote control
Blank
Uses Blank to hide the screen image. You can unseal the image gradually by using the
mouse of the remote control, or simply press Blank to turn on the image immediately.
Projector
14
Operation
Remote control
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Menu System
Press Menu for the main menu, and then press 3or
Menu again to select items in the sub-menu.
4 to select a sub-menu. Press
Menu Bar
Sub-menu
PC
Display
Keystone
Brightness
Contrast
Phase
H Size
S-Video
Auto Resize
H Position
V Position
Color Temp
Information
Ratio
Color
Tint
Color Temp
Y/Pb/Pr
Video
Image
Keystone
Brightness
Contrast
Color
Tint
Ratio
System
Sharpness
Color Temp
Information
Source
Mirror
Source Scan
Volume
Mute
Control
Language
OSD
Setup
Economic
Mode
Reset
Lamp Hour
PIP
Main page:
PIP Source
PIP Size
PIP Pos.
H Position
V Position
More Options
Sub Page:
Brightness
Contrast
Color
Tint
Sharpness
System
Operation
15
BenQ PB7200/ PB7220/ PB7100 User’s Manual
1. Display Menu
FUNCTION
DESCRIPTION
Corrects any keystoning of the image.
Keystone
+
-
Adjusts the brightness of the image.
Brightness
Adjusts the degree of difference between dark and light in the
image.
Contrast
Adjusts to avoid the occurrence of flicker.
Phase
*This function is not available when the input mode is Video or SVideo.
Adjusts to fit in the desired image size.
H Size
Color
Tint
16
Operation
*This function is not available when the input mode is Video or SVideo.
Increases or decreases the color range (R, G, B) of the image.
*This function is not available when the input mode is PC.
Adjusts the image to make it appear more red or blue.
*This function is not available when the input mode is PC.
BenQ PB7200/ PB7220/ PB7100 User’s Manual
2. Image Menu
FUNCTION
Auto Resize
DESCRIPTION
Makes the best fit of the image to the screen,
1. On 2. Off 3. 16:9
*This function is available only when the input mode is PC .
Ratio
Users have 2 options for the image ratio.
1. 4 : 3 2. 16 : 9
*This function is available when the input mode is YPbPr, Video or SVideo.
Adjusts the horizontal position of the projected image.
H Position
*This function is available only when the input mode is PC.
Adjusts the vertical positon of the projected image.
V Position
*This function is available only when the input mode is PC.
Color Temp
Adjusts the color temperature to fit your preference.
Information
Shows the current resolution.
System
Sharpness
Color
Tint
System information will be shown:
1.NTSC 2. PAL 3.SECAM 4. YUV
Adjusts the image to make it look sharper or softer.
*This function is not available when the input mode is PC or YPbPr.
Increases or decreases the color range (R, G, B) of the image.
*This function is not available when the input mode is PC.
Adjusts the image to make it appear more red or blue.
*This function is available only when the selected System is NTSC.
Operation
17
BenQ PB7200/ PB7220/ PB7100 User’s Manual
3. Source Menu
FUNCTION
Mirror
Source Scan
DESCRIPTION
1. Default
2. Ceiling mounted projection
3. Rear screen projection
4. Ceiling mounted and rearscreen projection
Shows the input source from among RGB-1, RGB-2, YPbPr, S-Video
and Video when several sources are available.
Adjusts the volume level.
Volume
Off
Mute
18
Operation
On
BenQ PB7200/ PB7220/ PB7100 User’s Manual
4. Control Menu
FUNCTION
Language
OSD
Setup
Economic Mode
Reset
Lamp Hour
DESCRIPTION
Language sets the language for the OSD control menus.
Use the 3 / 4 key to select the desired language from among
English, French, German, Italian, Spanish, Korean, Traditional
Chinese and Simplified Chinese.
OSD Pos.
Selects a desired OSD position.
OSD Time
Sets the length of time the OSD will remain active after the
last time you pressed the button. The range is from 5 to 60
seconds in 5-second increments.
Source Scan
When selected, activates the Source scan function.
Keystone Hold
When selected, preserves the last keystone correction value
even when the projector is restarted.
Mirror Hold
When selected, preserves the last mirror correction value
even when the projector is restarted.
Blank Time
Determines the length of time before the projector is shut off
when Blank is activated.
Auto Off
Sets the length of time before the system is shut off when no
input is detected.
User Logo
Enables the user to define his/her own logo screen that will
display during strat-up. Three modes are available: Default
(BENQ logo), black screen and blue screen.
Selects Economic mode to lower brightness and extend the
lamp life.
Returns all settings to their factory preset values.
Shows lamp usage time.
Operation
19
BenQ PB7200/ PB7220/ PB7100 User’s Manual
5. PIP Menu
These functions are available only when the input mode is PC and the PIP source is
Video or S-Video.
FUNCTION
PIP Source
DESCRIPTION
Selects the source for the PIP.
Enables use of the 3 / 4 key to scroll through the four alternatives: Off, Small, Medium, Large.
PIP Size
PIP-Source
PIP-Pos
PIP-Size
Selects a desired position for the PIP.
PIP-Source
PIP-Pos
PIP-Size
PIP Position
H Position
Adjusts the horizontal position of the PIP image.
V Position
Adjusts the vertical position of the PIP image.
More Options
Brightness
Contrast
Color
Adjusts the degree of difference between dark and light for the
PIP image.
Increases or decreases the color range (R, G, B) of the image.
Tint
Adjusts the image to make it appear more red or blue.
Sharpness
Adjusts the image to make it appear sharper or softer
System
20
Enables use of the 3 / 4 key to select more PIP functions
including Brightness, Contrast, Color, Tint, Sharpness and System.
Adjusts the brightness of the PIP image.
Operation
Shows PIP image systems: NTSC, PAL, SECAM
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Shutdown
1.
Press and hold POWER and a warning message will appear. To turn off the
projector, press and hold POWER again.
Projector
Remote Control
2.
The fan will continue to run for approximately 90 seconds.
3.
Turn off the main power switch.
4.
Disconnect the power cord from the wall socket.
Caution
Please do not unplug the power cord before POWER is shut down or during the 90-second cooling process.
If the projector is not properly shut down, to protect the lamp, the system will detect this and cool the lamp for 90 seconds automatically
before turning on again.
Operation
21
BenQ PB7200/ PB7220/ PB7100 User’s Manual
MAINTENANCE
Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting the time of
lamp replacement, please install a new lamp or consult your dealer. An old lamp could
cause a malfunction in the projector and in rare instances may even break.
For more detailed information, please refer to "LED Indicator Status & Illustration" on
page 24.
Caution
The Lamp and Temp indicators will light up if the lamp becomes too hot.
Turn off the power and let the projector cool for 45 minutes. If the Lamp or
Temp indicator still lights up when turning the power on, please contact
your dealer.
Lamp Replacement
Caution
To reduce the risk of electrical shock, always turn off the projector and disconnect the power cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45
minutes before replacing the lamp.
To reduce the risk of injuries to fingers and damage to internal components,
use caution when removing lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality
by touching the lens, do not touch the empty lamp compartment when the
lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner.
22
Maintenance
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Step 1. Turn off the projector. Disconnect the power cord from the outlet and the
projector.
Step 2. Loosen the screw and remove the lamp
cover. If the lamp is hot, avoid burns by
waiting 45 minutes until the lamp has
cooled.
Step 2
Step 3. Loosen the 3 screws. (It is strongly
recommended that you use a
magnetic-head screwdriver.) Pull the
handle to remove the lamp housing. If
the screws are not loosened
completely, they could injure your
fingers. Do not insert your hand into
the box after the lamp is removed. If
you touch the optical components
inside, this could cause color
unevenness in projected images.
Step 3
Step 4. Replace the lamp with a new one.
Insert it into the projector, and tighten
the screws firmly. Loose screws may
cause a bad connection, which may
result in malfunction.
Step 4
Step 5. Re-install the lamp cover and tighten
the screw. Do not turn on the
power with the lamp cover
removed. Whenever the lamp is
replaced, reset the total lamp
operation time. Do not reset if the
lamp is not replaced as this could
cause damage.
Step 5
Maintenance
23
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Resetting Lamp Hours
If you replace the lamp after 2000 hours of operation, please follow the instructions
below within 10 minutes of powering on.
OSD
FUNCTION
Press and hold the Exit button on the
projector for 3 seconds to display the total
used lamp time.
•
•
Press the MENU button on the
projector during the lamp hour
message. An adjustment message will
appear.
Press W or X to reset lamp hours or
press EXIT to leave.
Temp Information
When the LED lights up, it is warning you of the following possible problems:
1.
The internal temperature is too high.
2. The fans are not working.
Turn off the projector and contact qualified service personnel for further help.
For more detailed information, please refer to "LED Indicator Status & Illustration" on
page 24.
LED Indicator Status & Illustration
llustration
1.
24
- : LED OFF
2.
: LED blinking
3.
: LED solid ON
Maintenance
BenQ PB7200/ PB7220/ PB7100 User’s Manual
LED
Status & Description
Power Temp Lamp
Power events
Power switch on
O
O
O
O
-
-
O
-
-
G
-
-
O
-
-
G
-
-
Power-up cooling. Projector cooling system will auto-cool for
90 seconds when power was abnormal shutdown without
cooling and power on again within hours.
Stand-by
Lamp LED is blinking during powering up.
Power-down cooling for 90 seconds after power has been
turned off.
Normal operation
Lamp events
-
-
R
-
-
R
Lamp spoil, it is warning you that lamp usage has exceeded
2000 hours. Replace the projection lamp with a new one
immediately.
Lamp error, the lamp is not properly attached or lamp
damaged. Please contact your dealer.
Thermal events
R
R
-
R
R
G
R
R
G
Fan 1 error, projector will auto shutdown. If you return on
the power, and projector shutdown again. Please contact
your dealer.
Fan 2 error, projector will auto shutdown. If you return on
the power, and projector shutdown again. Please contact
your dealer.
Fan 3 error, projector will auto shutdown. If you return on
the power, and projector shutdown again. Please contact
your dealer.
Maintenance
25
BenQ PB7200/ PB7220/ PB7100 User’s Manual
26
G
R
-
G
R
G
G
R
G
-
R
-
-
R
G
-
R
G
Maintenance
Thermal sensor 1 over-temperature, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
Thermal sensor 2 over-temperature, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
Thermal sensor 3 over-temperature, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
Thermal sensor 1 doesn’t work, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
Thermal sensor 2 doesn’t work, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
Thermal sensor 3 doesn’t work, projector will auto
shutdown. If you return on the power, and projector
shutdown again. Please contact your dealer.
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Service Information
Accessories (included in the standard package)
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part Number
Signal cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J0508.502
Video cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1303.501
S-Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.72920.011
RCA R/W audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J1311.001
PC - PC audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.74405.501
Soft carry case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.J7201.001
HDTV cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.J2401.001
USB mouse cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50.73213.501
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.J3401.011
Alternative Accessories
Power cord (for the US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.01818.000
3-2 converter(for the US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.91007.001
Power cord (for EU countries) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27.82718.281
Power cord (for UK). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.01018.000
Optional Accessories (not included in the standard package)
Description of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Part number
Mac adapter (switchable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20.20118.A15
250W lamp module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.J4002.001
Ceiling mount kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.J7615.001
Ordering Parts or Getting Information
For product information, product assistance, service information, or to order
accessories, please visit the BENQ Corporation website at http://www.BenQ.com.
Maintenance
27
BenQ PB7200/ PB7220/ PB7100 User’s Manual
TROUBLESHOOTING
Common Problems & Solutions
NO POWER
Try these solutions:
•
Make sure the power cord is inserted snuged into the AC adapter socket.
•
Make sure the power cord is inserted snuged into the power outlet.
•
Toggle the power switch to the position “1”.
•
Wait two minutes after the projector is turned off before turning the projector
back on.
NO PICTURE
Try these solutions:
•
Check for the proper input source.
•
Ensure all cables are connected properly.
•
Adjust the brightness and contrast.
•
Remove the lens cap.
TRAPEZOID IMAGE ON THE SCREEN
Try these solutions:
•
Reposition the unit to improve its angle on the screen.
•
Use the Keystone correction key on the control panel of the projector or the
remote control unit.
POOR COLOR
Try these solutions:
•
Select the correct video system.
•
Adjust brightness, contrast, or saturation.
BLURRED IMAGE
Try these solutions:
•
Press Auto on the control panel of the projector or the remote control unit to
get better picture quality.
•
Adjust the focus.
•
Reposition the unit to improve its projection angle.
•
Ensure the distance between the unit and screen is within the adjustment range of
the lens.
28
Troubleshooting
BenQ PB7200/ PB7220/ PB7100 User’s Manual
REMOTE CONTROL DOES NOT WORK
Try these solutions:
•
Replace the batteries with new ones.
•
Make sure there is no obstacle between the remote control and the projector.
•
Stand within 6 meters (19.5 feet) of the projector.
•
Make sure nothing is blocking the front and rear receivers.
Status Messages
On-Screen Messages
Description
SEARCHING
Projector is searching for input.
ACQUIRING SIGNAL
Projector has identified the input signal and is running the auto image adjustment function.
OUT OF RANGE
Input signal frequency exceeds the projector’s
range.
LAMP WARNING CHANGE LAMP AND
RESET LAMP TIMER!
The lamp has been in operation for 1900 hours.
Install a new lamp for optimal performance.
OUT OF LAMP USAGE
TIME. YOU HAVE TO
CHANGE THE LAMP!
The lamp has been in operation for 1980 hours,
and the power will turn off after 20 hours.
OUT OF LAMP USAGE
TIME. CHANGE THE
LAMP!
The lamp has been in operation for over 2000
hours. The warning message will display for 30
seconds every 5 minutes after you turn on the
projector and the power will turn off automatically after 10 minutes.
Troubleshooting
29
BenQ PB7200/ PB7220/ PB7100 User’s Manual
SPECIFICATIONS
Projector Specifications
Technical Specifications
Note: All specifications are subject to change without notice.
General
Product name
Personal Projector
Model name
PB7200
1024X768 XGA
PB7220
1024X768 XGA
PB7100
800X600 SVGA
Optical
Display system
1-CHIP DMD
Lens F/Number
F/2.6
Lamp
250W UHP lamp
Electrical
Power supply
Power consumption
Mechanical
Dimensions
Operating temperature
range
Weight
Input terminal
Computer input
RGB input - 1
RGB input - 2
Video signal input
S-VIDEO
VIDEO
HDTV signal input
Audio signal input
Audio 1
AC100 ~ 240V, 4.0A, 50/60 Hz (Automatic)
330W (Max)
258 mm (W) x 80 mm (H) x 211.5 mm (D)
10°C ~ 40°C
5.6 lbs (2.5 Kg)
D-sub 15-pin (female)
D-sub 15-pin (female)
Mini DIN 4-pin port x1
RCA jack x1
D-sub <--> YPbPr RCA jack x3
Mini jack stero port
Output
USB mouse connector
Speaker
A/B series x1
2 watt x 1
Control
RS-232C
30
Specifications
9-pin x1
BenQ PB7200/ PB7220/ PB7100 User’s Manual
Timing Chart
Resolution
H Sync (kHz)
V Sync (Hz)
Remark
640x350
31.5
70.1
640x400
37.9
85.1
720x400
31.5
70.0
720x400
37.9
85.1
VESA
640x480
31.5
60.0
VESA
640x480
37.9
72.8
VESA
640x480
35
66.7
Macintosh
640x480
43.3
85.0
VESA
800x600
35.2
56.3
VESA
800x600
37.9
60.3
VESA
800x600
46.9
75.0
VESA
800x600
48.1
72.2
VESA
800x600
53.7
85.1
VESA
832x624
49.7
74.5
Macintosh
1024x768
48.4
60.0
VESA
1024x768
56.5
70.1
VESA
1024x768
60.0
75.0
VESA
1024x768
68.7
85.0
VESA
1280x1024
64.0
60.0
VESA
VESA
Specifications
31
BenQ PB7200/ PB7220/ PB7100 User’s Manual
DIMENSIONS
Unit: mm
32
Dimensions
BenQ PB7200/ PB7220/ PB7100 User’s Manual
WARRANTY
Limited Warranty
BENQ warrants this product against any defects in material and workmanship, under
normal usage and storage.
Exclusion to Warranty: The lamps are considered a consumable item and are warranted
for 90 days or 500 hours, whichever occurs first. Proof of purchase date will be required
with any warranty claim. In the event this product is found to be defective within the
warranty period, BENQ’s only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately
notify the dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in accordance with BENQ’s written instructions. This warranty gives you specific
legal rights, and you may have other rights which vary from country to country.
For other information, please refer to BenQ Warranty Information Book.
Warranty
33
BenQ PB7200/ PB7220/ PB7100 User’s Manual
SAFETY REGULATIONS
FCC Statement
CLASS A: This equipment generates, uses and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply with the
limits for a Class “A” computing device pursuant to Subpart B of Part 15 of the FCC
Rules, which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be required to correct the
interference.
CLASS B: This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the distance between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EEC Statement
This machine was tested against the 89/336/EEC (European Economic Community) for
EMC (Electro Magnetic Compatibility) and fulfills these requirements.
34
Safety Regulations
Download PDF