Winy technology | V700GM | User manual | Winy technology V700GM User manual

User Manual
Vehicle Drive Recorder
WINYCAM HD
V300 HD
2.0 mega pixel
WINY Technology Co., Ltd.
http://winycam-eng.com
Contents
Precautions ………………………………………………………………………………………………………………………… 1
- Precautions for safety when using the product …………………………………………………………………………… 2
- Precautions when using a SD card ………………………………………………………………………………………… 3
Standard Package ………………………………………………………………………………………………………………… 4
Product Features
………………………………………………………………………………………………………………… 5
Product Parts ……………………………………………………………………………………………………………………… 6
How to install ……………………………………………………………………………………………………………………… 7
How to Record……………………………………………………………………………………………………………………… 8
LED Operation ……………………………………………………………………………………………………………………… 9
Voice Guide ………………………………………………………………………………………………………………………… 10
PC Original Viewer Program Installation ………………………………………………………………………………………… 11
- Screen Configuration ………………………………………………………………………………………………………… 12
- Viewer Configuration ………………………………………………………………………………………………………… 14
- Configuration ………………………………………………………………………………………………………………… 16
Configuration Default Setting ……………………………………………………………………………………………………… 18
Firmware Update
………………………………………………………………………………………………………………… 19
SD Card Format …………………………………………………………………………………………………………………… 19
Specifications ……………………………………………………………………………………………………………………… 20
Recordable Time ………………………………………………………………………………………………………………… 20
Warranty …………………………………………………………………………………………………………………………… 21
WINYCAM V300HD
1
Precautions for safety when using the product
Please do not operate the product during driving. It may cause accidents.
Please install the product in a place not to interfere with a driver's view.
Do not disassemble or convert the product intentionally. It may lead to product failure and the responsibility for the damageto the
product resulting from this shall be borne by the user.
When damage to the product itself occurs due to a major accident or the power is disconnected, images of the accident may notbe
recorded.
Please keep the windshield clean at portion of recording before recording.
Since this product is a device that records a driving video by using the camera, the image quality may drop when entering
thetunnel, in shading contrast, backlight and photometric conditions, and the middle of the night.
In case those foreign objects attach to camera lens, recorded video may not be in good condition. Please keep the lens clean.
Do not leave a product in a place exposed to the direct sunlight in a car or in a confined car. It may cause a malfunction.
Do not wipe the product using chemicals, detergents, etc., but wipe it lightly using a soft cloth.
The thermal environment at below -5℃or over 55℃ may cause a malfunction or failure of the product. (When not using the
product, please be careful about storage temperature)
Do not use the product in a place at high temperature or much moisture.
Do not press excessive force to the products (especially buttons and bracket). It may cause a malfunction of the products.
Before using the product, make sure to operate it for 3 to 5 minutes and verify that the image saved properly and then use it.
If the product is in prolonged exposure to sunlight or high temperatures during the summer, normal operation can be difficult.
When firmware upgrade is in progress, if SD card is removed or a power is disconnected, failure of the product may occur, so
should be careful.
When removing or disconnecting the cigarette lighter cable, it may result in electric shock, so do not touch it with wet hands.
Do not use the damaged cigarette lighter cable. It may cause fire and electrical shock.
Do not leave the cigarette lighter cable or the product near heating equipment.
When not using the product for the long-term, please separate off the cigarette lighter cable from the product.
Please plug the cigarette lighter cable correctly and should not be shaken.
Do not bend or pull the cigarette lighter cable forcefully or avoid placing heavy objects on the cigarette lighter cable.(Adamaged
power cord may cause fire or electric shock)
Even if overwrite function is in ‘Off’ condition, a part of recorded file may be deleted to create some recording space at booting.
In the lower frame setup, the event may not be recorded. For the stable event recording, recording setup is greater than or equal to
15 frames is recommended.
2
WINYCAM V300HD
Precautions when using a SD card
In order to confirm normal operation of the product, please check the image of a SD card and format it on a regular basis.
(PC format needed one to two times per month)
Because an SD card is consumables, if it is used for a long time, you may lose the data or may not record due to an error, so
please check it periodically.
When the product is in recording or the power is on, do not eject the SD card forcibly. It may cause a failure of the SD card and
data loss.
Due to excessive temperature rise inside the car, the data may not be saved or get damaged, so please park the car in a cool
place in the summer.
When identify the car's accident or damage, please keep the SD card separately. Due to overwrite, important data may be deleted.
When turn off the power of the body and remove the SD card before LED is turned off, the last recording file may not be saved, so
please be careful.
In general, the SD card is a consumable product in life, so if it is not used for a long time, you may not be able to save the data. In
this case, buy a new SD card and use it, and please always check that the recorded images and a SD card have no problems with
data storage.
When driving a car, do not remove the SD card. Make sure to remove it safely when a car is in parking or stop.
After turning on the power, make sure that it is in normal operation.
Please note that the warranty period of an SD card is six months, and replace it at the time of more than six months.
The SD card randomly purchased other than the one we provide, shall be excluded from the warranty, and we shall not take any
responsibility for loss and damage of the data recorded in the SD card in any case.
This product is assistant device for recoding driving video.
Please use this product for your reference for checking driving video,
not as special CCTV because the image might not be record depend on environment.
This product might change without any notice for performance improvement.
This user manual indicate only basic user manual, please check furthermore detail information from http://winycam-eng.com
WINYCAM V300HD
3
Standard Package
Body & Bracket
Car Cigar jack
Micro SD card
SD Card Adaptor
User Manual
Cable Clip
Option
Accessories
Video Cable
(Selling separately)
GPS Bracket
(Selling separately)
The viewer program is stored in Micro SD card.
Please use after saving the program in advance in the computer, etc. so that the program can’t be deleted.
(If it is deleted, you can download it from our website.)
The packaged product picture of the user manual may differ from the actual product.
Video cable is used for connection to the TV / car navigation, and can monitor real-time. But please note that depend on monitors,
Video input type is different and check the user manual of monitor.
4
WINYCAM V300HD
Product Features
2 Mega Pixel image sensor mounting.
150 degrees (based on lens) wide mega lens (based on actual recorded video) are applied.
HD (1280X720) resolution and 30FPS are supported
Security LED light are mounted on front body (LED Lighting function On/Off can be set in PC viewer)
Car constant power discharge protection function (setup is available in PC viewer) is built-in. Separated power discharge safety
equipment is not necessary.
G sensor built-in Automatic parking recording mode change and event recording mode.
Various recording functions - normal, manual, event, motion, automatic parking recording mode change.
Operating instructions service by voice guidance.
External video output. (real-time video image can be checked)
Soft look and emotional design. (easy removable body)
Driving records can be stored with GPS data. (optional)
PC viewer software are provided to change various setting values and map data can be checked when using GPS. (In the
general video player (e.g. Windows media player), recorded video can be played)
High performance microphone built-in
Back-up battery built-in (safety backup power support)
Memory back-up is available by flash memory, even in the error occurred when firmware is in upgrade.
When car constant power discharge functions in setup, the dark current of less than 2mA is consumed. (based on 12V)
SD card can be formatted as the product itself, without connecting to a PC.
Set the braking voltage to protect car battery discharge.
Voice recording On/Off function and speaker output On/Off function.
Each capacity of normal/ event/ motion folder can be set in PC Viewer.
Recording image resolution can be set to change. (HD/D1/VGA)
WINYCAM V300HD
5
Product Parts
6
1.
Bracket (GPS Bracket: Selling separately)
8.
Microphone
2.
Up-down adjustment screw
9.
Record LED
3.
Security LED
10.
Power LED
4.
Camera Lens
11.
Speaker
5.
GPS Connection
12.
Record Button (for manual)
6.
External Video Cable(Selling separately)
13.
Micro SD card Slot
7.
Power Input
WINYCAM V300HD
How to install
1.
2.
Insert the Micro SD card into the
product. (Note the direction of
the SD terminal)
4.
3.
Connect packaged cigar adapter
to the power connecting terminal.
5.
Clean foreign substance in a
place to attach the product first
and attach the product.
Remove protective sticker on the
double-sided tape of the bracket.
6.
Connect cigar jack to the car
cigar socket.
The picture after installed
WINYCAM V300HD
7
How to record
1. Recording: V300HD is automatically booted at power on, and recording starts in basic normal recording mode.
2. Recording Mode: it is classified into driving recording mode and parking (motion) recording mode
3. Recording Method: it is classified into normal recording, event recording, motion recording.
※ For automatic recording and manual recording methods, please refer the below table.
Recording
mode
Driving
recording
mode
Parking
(motion)
recording
mode
Recording
method
Auto recording method
Manual recording
method (button
control)
Recording time
Recording
folder
Normal
recording
-
-
Set on configuration
30 / 60 / 120 sec
Normal
Event recording
In G-sensor detect Shock
One short press
button
Motion
recording
In G-Sensor is not
detected for more than 8
minutes Automatic motion
recording mode change
3 second long
press button
Event recording
In G-sensor detect Shock
One short press
button
Event
Each 15
second
recording
before and
after event or
motion
occurrence
* For HD highest
quality resolution
only,
each 10 second
recording before
and after event or
motion occurrence
Motion
Event
※ after change to parking recording mode by manual, if you want to change normal recording mode again, please press
“REC” button for 3 seconds (during event recording, mode cannot be changed.)
8
WINYCAM V300HD
LED Operation
Rear LED
Power LED
Situation
Front LED Operation
REC LED
Booting
Off
Red lighting
Firmware update
Off
Orange flashing
(Green/Red)
Normal recording
mode start
Event recording mode
standby
GPS Signal
Non-received
Red flashing
Orange flashing (Green/Red)
Green flashing
Green lighting
Red flashing
left and right LED and central
LED cross-flashing
Orange flashing
(Green/Red)
Green
lighting
Green
Flashing
(Green/Red)
Orange
Flashing
(Green/Red)
Orange flashing
(Green/Red)
Motion/Parking recording
start
Motion/Parking recording
standby
GPS Signal
Received
All flashing
Event recording mode start
Motion/Parking on Event
recording
GPS module
Normal
(no GPS module)
Reciprocation flashing left
and right
Orange lighting
(Green/Red)
No SD Card (Error)
Off
Off
Orange flashing (Green/Red)
ETC
Off
Off
Off
WINYCAM V300HD
9
Voice Guide
Situation
Voice Guide
Event / Motion Occur
(Alarm Tone) “Ding-Dong”
Remove SD card / SD card Error
“Please check a SD card.”
Firmware Update Start
“Firmware will be updated.”
Firmware Update Completed
“Firmware update has been completed.”
Normal Recording Mode Start
“Normal recording will start.”
* Event Recording Mode Start
“Event recording will start.”
Parking Recording Mode Start
“Parking recording will start.”
Recording End
“Finished”
Change the Date / Time setting
“Setting has been changed.”
Automatically change to
Normal Recording Mode
“SD card capacity is full. Normal recording will start”
SD card Format
“Will you format your SD card?”
※ Only when event recording mode is set in the configuration, the voice guiding "event recording will start" will announce.
10 WINYCAM V300HD
PC Original Viewer Program Installation
1. System Requirements
-
Windows XP(32bit), Windows Vista(32bit), Window7(32/64)
Pentium4 2.8GHz & RAM over 1GB.
1024 * 768 Display device is set to be the primary monitor.
DirectX Support (WPF)
2. Install
-
Playback program is in packaged Micro SD card.
Insert this SD card into the USB card reader and connect to the computer.
An executable file is in the SD card as below figure.
If you run “setup.exe”, Winy BB Viewer will be installed. And then, installation will be
continued according to the installation sequence of setup dialog box.
※ Installation may tale long depend on PC Usage environment.
1
2
Next
4
3
Select file location
and click “Next”
Next
5
※ If viewer program is lost
accidentally, please visit our
website winycam-eng and
download to the SD card
Installing
Complete installation
WINYCAM V300HD
11
PC Original Viewer - Screen Configuration
2
3
4
5
6
7
28
29
1
8
10
9
13
14
15
16
17
18
19
20
22
21
11
12
23
12 WINYCAM V300HD
24
25
26
27
PC Original Viewer - Screen Configuration
Item
Function
Item
Function
1
1CH / 2CH select screen
16
Fast-Rewind
2
Viewer Configuration
17
Playback or Pause
3
System Configuration
18
Stop
4
Screen Capture
19
Fast-Forward
5
Print
20
File Skip
6
Zoom
21
Control Volume
7
Play List/Map Button
22
Total File Time/Playback Time
8
Playback File Location
23
Brightness/Contrast/Chroma
9
REC file list / Map Display
24
GPS signal condition
10
Playback Video Image
25
Driving speed
11
Playback Control
26
Latitude/Longitude
12
Full Screen
27
G-sensor information
13
Flip Horizontal
28
Restored image file
14
Flip Vertical
29
Split image
15
File Skip Back
WINYCAM V300HD
13
PC Original Viewer - Viewer Configuration
14 WINYCAM V300HD
PC Original Viewer - Viewer Configuration
Item
JPEG stores location
Language
Playback mode
Repeat
Description
Set location for captured JPEG image.
Select language.
Select display channel.
Select repeated playback.
App location
Select App is always the top of another window.
Video reverse
Select video reverse.
Device select
Select the model.
Video adjustment
Playback speed
Volume
Control Brightness/Contrast/Chroma
Control playback speed
Control recording volume level
WINYCAM V300HD
15
PC Original Viewer - Configuration
16 WINYCAM V300HD
PC Original Viewer - Configuration
Item
Description
Mode Setup
Selects normal recording mode or event recording mode when driving, and while event recording is set, the data by event
recording mode will be stored. (Default: Normal mode)
Driving Mode Frame Rate
Sets the frame rate for driving. (Default: 30F) the higher frame rate is set, the movement image will be saved more smoothly.
Time Setting
Sets the current your time. when setting time in PC, please add travel time between the location you set time on PC and the
location you apply set time to black box in a car. (PC -> Travel time -> Car). (When using GPS bracket, time setting will be
automatically applied.)
Resolution
Sets the size of image resolution. HD 1280*720 (Default) / D1 720*480 / VGA 640*480
Parking Mode Frame Rate
Sets the frame rate when parking (Default: 15F)
Set Time?
The time set in [Time Setting] will be applied to black box. Only when changing the time set, select "Yes". (Default: No)
Normal Recording Time
30 seconds / 1 minute (default) / 2 minute. You can set recording time.
Parking Recording Mode Change
If there is no detection on G-sensor for over a certain time (approximately 8 minutes), it will be automatically switched to
parking recording mode, but if any detection on G-sensor for over a certain time (about 10 seconds), it will be automatically
switched to driving recording mode.
LED Lightning Setting
Sets the front LED display or not.
Video Quality
Sets the quality of recording images.
Voice Guide Volume Level
Sets volume level for voice guide.
Motion Sensitivity
Sets the sensitivity level of motion detection sensor.
G-Sensor Sensitivity
Sets the sensitivity level of shock detection sensor.
Recording Volume Level
Sets the volume level of the recording voice.
Overwrite Function(Event/Motion)
Deletes the oldest data and sets to overwrite them with a new file.
Breaking Voltage
When car voltage keep under setting breaking voltage for 5 min, a power will shut down automatically. (Parking Mode Only)
SD card Folder Capacity Adjustment
Adjusts storage space ratio by recording folder in the entire SD card storage capacity.
Time Zone
Select your local time zone
TV-OUT
Select video output format
Summer Time
Select to apply summer time
WINYCAM V300HD
17
Configuration Default Setting
Item
Settings
Item
Settings
Mode Setup
Normal
Driving mode Frame Rate
30
Resolution
HD (1280 x 720)
Parking Mode Frame Rate
15
Time Setting
The time setting value
on PC will be output.
Set Time?
No
Normal Recording Time
1 Minute
Parking Recording Mode
Change
Off
LED Lightning Setting
On
Video Quality
High-Quality
Voice Guide Volume Level
2
Motion Sensitivity
Normal
G-Sensor Sensitivity
Normal
Recording Volume Level
2
On
Breaking Voltage
Overwrite
(Event/Motion)
Camera Sensor
SD card Folder Capacity
Adjustment
(All 20 Cells)
Middle
Brightness
Middle
Color
Middle
Movie
10 Cells
Motion
4 Cells
Event
6 Cells
Time Zone
(UTC+09:00)
TV-OUT
PAL
Summer Time
18 WINYCAM V300HD
11.8(23.7)V
Contrast
No
Firmware Update
Firmware Update
1.
2.
3.
4.
Remove the SD card from the black box after turning off the power completely.
Copy the firmware file to the top position of the files in the SD card after connect the SD card to the PC.
Boot the power in the black box after inserting the SD card into a black box
If the firmware file is automatically recognized, start to update the firmware after the voice guide to indicate the
start of the firmware.
5. When the firmware update is completed, the firmware file stored in the SD card is automatically deleted and
the black box is rebooted after the voice guide to indicate the completion of the firmware update.
Firmware File Format
File name will be as FW04_yymmdd.bin - yymmdd will change depending on year/month/date of the
firmware version.
SD Card Format
How to format the card if the SD card has recognition error
1. Turn on the power while pressing the “REC” button.
2. While you press “REC” button, format will start.
3. When you press “REC” button briefly within format stand-by time, the SD card will be formatted and rebooted.
※ If you press “REC” button a little longer, it will be rebooted and even if stand-by time is over.
WINYCAM V300HD
19
Specifications
Item
Specifications
Camera
Item
2 Mega pixel, view angle (129 degrees)
G-Sensor
Specifications
Video Output
NTSC / PAL Composite
3-axis acceleration G Sensor built-in
Voice Recording
Microphone built-in
An external GPS module (optional)
Voice Guidance
Speaker built-in
Video Compression
H.264/AVC
Recording Media
Micro SD card (SDHC)
Audio Compression
PCM. 16KHz. Stereo
Power Input
DC 12V ~ 24V Free Voltage
Recording Channel
1 Channel
Size/Weight
107(W) x 47(H) x 38(D)mm / ARO 62g
GPS
Recording Resolution
HD (1280x720), D1 (720x480), VGA(640x480)
FPS
Storage Temperature
-40 ~ +85℃
Operating Temperature
-20 ~ +60℃
30/25/20/15/10/5FPS selectable
Highest quality (bitrate 8Mbps – HD Standard)
High quality
(bitrate 6Mbps – HD Standard)
General quality (bitrate 4Mbps – HD Standard)
Image Quality
※ Below table is Recordable Time by setting value at
“SD card Folder Capacity Adjustment” Based on 8GB with high resolution
Recordable Time
Recording
mode
Folder
Capacity
Adjustment
(%)
Record
Time(Sec)
Normal
50
60
Event
30
30
30
15
Motion
20
30
15
15
Total
20 WINYCAM V300HD
Frame Rate (FPS)
Drive On
Parking On
Record Time (Min)
Drive On
30
The number of files (files)
Parking On
Drive On
99
104
90
52
Parking On
90
66
Available to record 3hours ~ 3hours 20minte based on 8GB SD card
198
131
Warranty
■ Warranty
1. The products are manufactured through the strict quality control and inspection process.
2. The defect occurring in normal use of user within the warranty period will be repaired free of charge.
■ Warranty Details (Conditions)
Free Service: The defect occurring under normal use within the warranty period from the date of purchase will be repaired
free of charge.
Paid Service: If the warranty period has passed.
Even within the warranty period, following cases shall be repaired at cost:
Failures caused by natural disasters (fire, lightning, flood damage, etc.)
Failures caused by carelessness using (drop, flooding, shock, breakage, excessive operation)
Failures caused by the malfunction of power in use and connected equipment.
Failures caused by any changes of a product and repaired from an unauthorized service center.
Body
1 Year
(from purchase date)
Accessory
Within 6 months
SD card, Bracket, Car cigar jack, Built-in Battery
Excluded warrantee
Card leader, Vided Cable (cut user’s mishandling)
Accessories are not repaired free of charge. The products other than the warranty period shall not be replaced free of charge.
Important data shall be backed-up in a safe place and we shall not be responsible for any loss of the data stored in the product.
Date :
Distributor :
D.
M.
Y.
Customer Service
Manufacture : 303-305, Bucheon Technopark, #365, Samjeong-dong, Ojeong-gu, Bucheon-si,
Gyeonggi-do , Korea 421-741
Please download the user manual, program from below website
http://winycam-eng.com
WinyTechnology Co., Ltd.
MEMO
WINY Technology Co., Ltd.
http://winycam-eng.com
Download PDF