QSC TouchMix -16, CXD 4.5, PLD 4.5, CX 302, PowerLight 3 PL380, CMXa CMX 2000Va, RMXa RMX 5050a, PLX2 PLX3602, GX 7, ISA 1350, K Sub, KW 181, KLA 181, ILA WL2082-i, WideLine-8 WL3082, WideLine-10 WL3082, AcousticPerformance AD-S4T, Isis IS-212 Pocket reference guide

Pocket

Reference

Guide

2014

Amplifiers

Founded over four decades ago, QSC Audio Products, LLC, is a globally recognized leader in the design and manufacture of professional audio system solutions. With power amplification, loudspeaker, digital signal processing (DSP) and digital mixer engineering resources all located under one roof, we uniquely leverage these technologies to deliver products and systems that far outperform the sum of their parts - providing compelling solutions for professional installed, portable, production and cinema sound customers worldwide.

A QSC solution may take the form of our market-leading K Series – a complete system including amplifier, loudspeaker and DSP technologies all contained within a single box. Or, a QSC solution may be comprised of hundreds of individual technology components, interconnected via Q-Sys ™ across a vast and complex network of audio, video and control devices. In both cases, and in every instance where QSC is utilized, the results are the same – a robust, reliable, easy-to-configure and deploy, sonically superior solution that meets the needs and exceeds the expectations of our customers and their clients in every way.

The following pages represent our latest products and technologies.

Designed to give you a brief overview, this Guide should be considered a supplement to the Products and Solutions pages online at qsc.com.

There, you will find a fully updated, comprehensive set of information, documentation, tools and images that work in tandem with this Guide.

Additionally, our online education site, qsctraining.com is another great resource to learn more about QSC products and solutions.

Thank you for the opportunity to share our passion for audio with you.

Enjoy the Guide.

2 Table of Contents

Table of Contents

Digital Mixers

QSC TouchMix

Amplifiers

CXD Series

PLD Series

CX Series

PowerLight ™ 3 Series

CMXa Series

RMXa Series

PLX2 Series

GX Series

ISA Series

Amplifier Accessories

Loudspeakers

K Series Active Loudspeakers

KW Series Active Loudspeakers

KLA Series Active Loudspeakers

House of K Accessories

ILA Series Installation Line Array

4

14

16

18

20

22

24

26

8

10

12

30

32

34

36

38

Table of Contents 3

WideLine-8 Line Array System

WideLine-8 Subwoofers

WideLine-10 Line Array System

WideLine-10 Subwoofers

AcousticPerformance ™ Series

AcousticDesign ™ Surface-mount

AcousticDesign ™ Ceiling-mount

Isis Series

Digital | Network

Q-Sys ™ Integrated System Platform

Networked Amplifiers

Q-Sys ™ I/O Peripherals

Q-Sys ™ Paging Peripherals

Q-Sys ™ Control Peripherals

QSControl.net

™ – BASIS ™ | RAVE | DSP

NAC-100 Network Audio Controller

SC28 System Controller

QR Index

82

84

86

88

76

78

80

89

90

50

54

66

74

42

44

46

48

4 Mixers

TouchMix Series

Compact Digital Mixer

TouchMix-16

The TouchMix Series offers musicians, production professionals and live performance venues the power and capability of a large format console in a highly portable, fully integrated, affordable and easy to use product.

Just as digital cameras offer advanced features to meet the needs of highly skilled professional photographers with “point and shoot” features to assist novice users in achieving optimum results, the TouchMix-8 (12 input channels) and TouchMix-16 (20 input channels) provide the user a choice of Advanced Mode operation that offers total control over all parameters or

Simple Mode that provides only the most essential controls.

“Big Mixer” Features and Specifications

TouchMix Series “no asterisk” specifications include 4-band, fully parametric

EQ with both variable hi-and lo-pass filters, as well as comprehensive dynamics processing on each input channel. Four mix busses feed four internal, professional, digital effects processors. Comprehensive dynamics, graphic EQ, hi- pass, lo-pass and notch filters and delay are available on both the main and aux outputs and there are 8 DCA groups with mutes as well as 8 mute groups.

Mixers 5

TouchMix-16 TouchMix-8

With four (TouchMix-8) or ten (TouchMix-16) auxiliary output channels,

TouchMix also has ample stage monitor mixing capability. Both models have the ability to drive multiple, wired stereo in-ear monitors directly.

Fast, Professional Results

TouchMix features a comprehensive library of Channel Presets, created specifically for the unique requirements of live sound reinforcement.

Designed by veteran live sound engineers utilizing all types of instruments, popular microphones and pickups as well as multiple types of speakers systems, these presets help the user achieve great results quickly. The mixers’ onboard Effects Wizard guides the user through the selection and assignment of appropriate effects while the Gain Wizard continuously monitors and displays input clipping. TouchMix also comes with a comprehensive library of complete Mixer Scenes, and all user parameters of any mix can be saved, both internally and via USB drive.

Compact and Complete

The TouchMix Series models are completely self-contained and require no external PC or video display. The graphic, color touch-screen provides access to all mix parameters along with a physical rotary encoder and hardware buttons. The available Remote Control App for iOS devices controls all mixer parameters and the included USB Wi-Fi adapter creates the network connection between the mixer and the hand-held device. No external network hardware is required. The mixer is also capable of direct recording to an external USB hard drive in 32-bit broadcast wave format. Tracks can be played back on the mixer or imported into most DAW software for over-dubs and post-production. TouchMix Models also come complete with their own padded carrying case, for transport and protection.

Available Mid-2014

6 Mixers

TouchMix Series

Compact Digital Mixer

Preliminary Specifications

DIsplay

Inputs (Mic/Line)

Input (Talkback)

Outputs

TouchMix-8 TouchMix-16

6.1" x 3.5" (156mm x 90mm) color TFT, touch sensing.

12 Total

4, XLR/TRS combi

4, XLR

2 Stereo, 1/4" TRS

20 Total

4, XLR/TRS combi

12, XLR

2 Stereo, 1/4" TRS n/a

2 Main, XLR, Line

4 Aux., XLR, Line

1 Stereo. TRS, (Line or In Ear

Monitor, 16 Ohm min. impedence)

1 Stereo Cue, TRS, (Line or headphone, 16 Ohm min. impedence)

1, XLR

2 Main XLR, Line

6 Aux. XLR, Line

2 Stereo Aux. TRS, (Line or In Ear

Monitor, 16 Ohm min. impedence)

1 Stereo Monitor, TRS, (Line or headphone, 16 Ohm min. impedence)

1 Stereo Cue, TRS, (Line or headphone, 16 Ohm min. impedence)

4-band, parametric EQ with Hi/Low shelving option, variable 24db/octave

HPF & LPF, Gate, Compressor

2-band shelving EQ, variable 24db/octave HPF, Gate, Compressor

Mic & Line Input

Channel Processing

2-Track (USB) &

FX Return Processing

Output Channel

Processing

Recording

Groups

Cue

Effects

Main outputs and auxes 1 - 6: 1/3 octave GEQ, Variable HPF and LPF,

4-band variable notch filters, Limiter

Auxes 7/8 & 9/10 (TM-16 only): 4-band PEQ, Limiter

14 tracks, requires USB 3.0 HD, minimum 7800 RPM

8 DCA groups (with mutes)

8 Mute groups

20 tracks, requires USB 3.0 HD, minimum 7800 RPM

Input cue priority, AFL, PFL, Solo In Place

4 professional effects engines including reverb, echo, delay, chorus. 50 factory, 50 user presets

1 Pitch Correct (assignable to any mono input channel)

Mixers 7

External Control

Wi-Fi

Dimensions (HWD)

Weight

Line Voltage Requirements

Sampling Frequency

Signal Delay (Latency)

THD

Frequency Response

Dynamic Range

Equivalent Input Noise

Residual Output Noise

Crosstalk

S/N Ratio

Input Gain

Maximum Input Level

Phantom Power

Included Accessories

Preliminary Specifications

Preset Memory

TouchMix-8 TouchMix-16

Mixer Preset: Factory & User mixer presets including all mixer parameters may be stored internally or loaded to / from USB

Channel Preset: Factory & User channel presets may be stored internally or loaded to / from USB iOS mixer app for iPad, control via Wi-Fi provides access to all mixer functions

USB Wi-Fi adapter included USB Wi-Fi adapter included

3.1” x 13.1” x 9.8”

79 mm x 333 mm x 250 mm

4.3 lb / 1.95 kg

100 VAC - 240 VAC, 50 - 60 Hz

3.5” x 14.2” x 11.7”

89 mm x 360 mm x 297 mm

5.9 lb / 2.98 kg

Selectable 44.1kHz or 48kHz

<1.6msec, any input to any output

<0.005%, +4 dBu, 20 Hz - 20 kHz, unity gain, any input to any output

20 Hz - 20 kHz +/-0.5 dB, any input to any output

105dB

-128dBu

-86dBu

-80dB

-94dB

Microphone inputs: 60dB, Line

+16dB (Mic inputs),

+22dB (Line inputs)

48V, individually switchable per channel

USB WiFI adapter, Soft Carrying Case, Power Supply

8 Amplifiers

CXD Series – Processing Amplifier

Installed Sound

4 Ch

8Ω

4Ω

2Ω

2 Ch

8Ω

4Ω

2Ω

Burst

500 W

500 W

400 W

Burst

1000 W

1000 W

800 W

CXD4.2

Continuous

400 W

400 W

325 W

Continuous

800 W

800 W

650 W

1 Ch

8Ω

4Ω

2Ω

1Ω

Burst

2000 W

2000 W

2000 W

2000 W

Continuous

1600 W

1600 W

1600 W

1600 W

Weight 18.5 lb / (8.39 kg)

Burst

1000 W

1600 W

1250 W

Burst

3250 W

2000 W

3200 W

Burst

3650 W

6000 W

3500 W

6000 W

CXD4.3

Continuous

625 W

625 W

625 W

Continuous

1250 W

1250 W

1250 W

Continuous

2500 W

2500 W

2500 W

2500 W

21 lb / (9.53 kg)

Burst

1200 W

2000 W

1600 W

Burst

4000 W

2350 W

4000 W

Burst

4550 W

7650 W

4450 W

7550 W

CXD4.5

Continuous

1150 W

1250 W

625 W

Continuous

2250 W

2250 W

2100 W

Continuous

4200 W

4200 W

4250 W

3700 W

22 lb / (9.98 kg)

Burst Power - 20 ms 1 kHz sine burst, all channels driven

Continuous Power - EIA 1 kHz 1% THD, all channels driven

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

Amplifiers 9

Representing a revolutionary advancement in amplifier design, CXD amplifiers feature powerful onboard DSP and deliver robust, high fidelity power housed in a 2RU chassis. Designed with integrators in mind, the

CXD line includes three models (CXD4.2, CXD4.3 & CXD4.5) capable of channels to drive a wide range of loudspeaker configurations including 70V and 100V systems. Flexible Amplifier Summing Technology ™ (FAST) actively distributes total amplifier power across one, two, three or all four outputs enabling amp channels to be paralleled or bridged for maximum current and voltage output.

• Up to 5,000W continuous and 8,000W peak with

70V/100V direct drive on the CXD4.3 and CXD4.5.

• Flexible Amplifier Summing Technology ™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels.

• Onboard full function loudspeaker processing including

Crossover, EQ, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors.

• Intrinsic Correction ™ ensures optimum sonic performance of

QSC loudspeakers.

• Preset Wizard simplifies setup, providing system design tools and loudspeaker selection.

• Factory Presets can be used as is, or modified and stored as one of 50 User Presets.

• Four Euroblock inputs and Four Euroblock touch-proof speaker outputs.

• PowerLight universal switchmode power supply with Power

Factor Correction for highest efficiency, improved audio performance, and low weight.

• Rear USB port for updating firmware and backing up presets

(Mac or PC).

10 Amplifiers

PLD Series – Processing Amplifier

Portable Sound

Developed specifically for the needs of portable sound systems, PLD amplifiers provide efficient, robust and high fidelity power capable of driving multiple channels and loudspeaker configurations. The PLD line includes three powerful, light-weight, four-channel amplifiers (PLD4.2,

PLD4.3 & PLD4.5) with advanced onboard DSP. Flexible Amplifier

Summing Technology ™ (FAST) actively distributes total amplifier power across one, two, three or all four outputs enabling amp channels to be paralleled or bridged for maximum current and voltage output.

• Capable of up to 5,000W continuous and 8,000W peak.

• Flexible Amplifier Summing Technology ™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels.

• Onboard full function loudspeaker processing including Crossover,

EQ, Limiting and Alignment Delay eliminate the need for outboard loudspeaker processors.

• Intrinsic Correction ™ ensures optimum sonic performance of QSC loudspeakers.

• Preset Wizard simplifies setup providing system design tools and loudspeaker selection.

• Factory Presets can be used as is or modified and stored as one of

50 User Presets.

• Four XLR input connectors and six NL4 0utput connectors.

• PowerLight universal switchmode power supply with Power Factor

Correction for highest efficiency, improved audio performance, and low weight.

• Rear USB port for updating firmware and backing up presets

(Mac or PC).

Amplifiers 11

4 Ch

8Ω

4Ω

2Ω

2 Ch

8Ω

4Ω

2Ω

Burst

500 W

500 W

400 W

Burst

1000 W

1000 W

800 W

PLD4.2

Continuous

400 W

400 W

325 W

Continuous

800 W

800 W

650 W

Burst

1000 W

1600 W

1250 W

Burst

3250 W

2000 W

3200 W

PLD4.3

Continuous

625 W

625 W

625 W

Continuous

1250 W

1250 W

1250 W

Burst

1200 W

2000 W

1600 W

Burst

4000 W

2350 W

4000 W

PLD4.5

Continuous

1150 W

1250 W

625 W

Continuous

2250 W

2250 W

2100 W

1 Ch

8Ω

4Ω

2Ω

1Ω

Burst

2000 W

2000 W

2000 W

2000 W

Continuous

1600 W

1600 W

1600 W

1600 W

Weight 18.5 lb / (8.39 kg)

Burst

3650 W

6000 W

3500 W

6000 W

Continuous

2500 W

2500 W

2500 W

2500 W

Burst

4550 W

7650 W

4450 W

7550 W

Continuous

4200 W

4200 W

4250 W

3700 W

21 lb / (9.53 kg) 22 lb / (9.98 kg)

Burst Power - 20 ms 1 kHz sine burst, all channels driven

Continuous Power - EIA 1 kHz 1% THD, all channels driven

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

12 Amplifiers

CX Series

Installed Sound

The CX Series is a line of two, four and eight channel amplifiers designed for installation applications requiring premium sound quality and high output.

Recognized by sound contractors worldwide for their reliability, CX Amplifiers feature PowerLight ™ power supply technology reducing weight, eliminating AC mains hum and improving audio quality. The highly efficiency power supply also draws less power and produces less heat resulting in added energy savings. CX Amplifiers also feature advanced amplifier control and monitoring via QSControl.net

™ and the Q-Sys ™ network audio platform.

• Active Inrush Limiting gently brings amplifiers on-line eliminating the need for costly AC power sequencers.

• Front-panel gain controls with1 dB detents allow precise level adjustment and are protected by tamper-proof security covers.

• DataPort connections enable remote control and monitoring of amplifier functions via Q-Sys ™ and QSControl.net

™ .

• Selectable clip limiters and infra-sonic filters protect loudspeakers from damage due to distortion and overexcursion.

• DataPort or Block Connector Inputs and touch-proof barrier-strip outputs

(2 ch models also include XLR inputs and 8 ch models feature Block

Connector Outputs).

• Sleep (Standby) Mode for energy saving efficiency.

• Transformer-less 70 /100 volt models available.

IT-42 is an output isolation transformer accessory for the QSC CX302 amplifier allowing it to drive two 25, 70 and 100 volt distributed lines in stereo or parallel or a single 140 or 200 volt line in bridged mono. Mounts to the rear of the CX302 amplifier requiring no additional rack space.

Amplifiers 13

CX 2-channel Models

CX 4-channel Models

CX 8-channel Models

Model

CX302V

CX602V

CX1202V

CX302

CX502

CX702

70 V*

250

440

–

–

1000

–

700

200

300

425

Watts per channel

8Ω 4Ω

–

550

–

–

1100

325

500

700

CX902

CX1102

CX204V

CX254

440

1000

220

–

550

700

–

170

900

1100

–

250

1500

1700

–

450

CX404

CX108V

–

100

250

–

400†

–

–

–

CX168 – 90 130 –

All channels driven. 20 Hz – 20 kHz, 0.05% THD *1 kHz, 0.05% THD **1 kHz, 1% THD

†1 kHz, 0.1% THD ††20 Hz – 20 kHz, 0.2% THD §20 Hz – 20 kHz, 0.1% THDs

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

2Ω*

–

–

–

600

800

1200

14 Amplifiers

PowerLight

™

3 Series

Concert Systems / Installed Sound

PowerLight 3 Series are our “Ultimate Analog” amplifiers, designed for the most demanding concert and live-sound reinforcement applications. All three models (PL380, PL340 and the PL325) feature the PowerLight ™ power supply technology reducing weight, eliminating AC mains hum and improving audio quality. With zero signal latency with select QSC processors for seamless integration and flawless loudspeaker alignment, the PowerLight

3 Series architecture provides users the choice of comprehensive, networked remote control, monitoring and DSP or the cost savings of a simple, straightforward analog input configuration.

• Class D (PL380) and Class H (PL340 & PL325) topology provide efficient high power performance.

• Three-position Input Sensitivity switch simplifies integration of PowerLight 3 amplifiers into existing amp racks and power systems.

• User defeatable clip limiters and selectable low-frequency filters (30 Hz, 50

Hz, Bypass).

• DataPort connection supports external amplifier control and/or the DSP-4 module.

• Zero signal latency between the DataPort and compatible devices such as the DSP-4 rear panel module, Q-Sys ™ or QSControl.net

™ BASIS ™ units.

• XLR and Block Input connectors and Binding post or Neutrik speakON ®

Output connectors.

• Comprehensive internal protection protects amplifiers and loudspeakers against over-current, over-temperature and clipping –without compromising program signal.

PL380

PL325 and PL340

Model

PL325

PL340

Watts per channel

8Ω 4Ω

500

800

850

1250

PL380 1500 2500

EIA 1 kHz, 1% THD

*Burst mode testing required due to AC service current limitations

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

2Ω

1250

2000

4000

Amplifiers 15

16 Amplifiers

CMXa Series

Installed Sound

CMXa Series amplifiers represent an economical and rugged power amplifier solution for installed sound applications. With four models to choose from

(CMX 300Va, CMX 500Va, CMX 800Va & CMX 2000Va) input and output connections on these amps are designed for the most flexible use in projects such as performance halls, houses of worship, sport clubs, gymnasiums, dance venues, pubs, and FGM/BGM systems. The CMXa Series provides unmatched performance and user ability at an affordable price point.

• Flexible output loading options enable low impedance loads comfortably down to 2Ω, and in some configurations will effortlessly drive 70V /100V lines.

• Recessed front panel gain controls with 1 dB detents for fast and accurate level settings.

• Security plate cover for gain controls to provide tamper-proof protection.

• Recessed rear DIP switches for easy selection between stereo, parallel, or bridged mode operation, and the additional choice of enabling/ disabling low frequency filter protection.

• Balanced XLR, TRS or Barrier Strip parallel inputs and NL4 or detachable

Block output connectors.

Amplifiers 17

CMXa 2RU Models

CMX 2000Va (3RU Models)

Watts per channel

Stereo Bridged

Model

CMX 300Va

CMX 500Va

CMX 800Va

70V

-

-

400

100V

-

-

-

70V

600

1200

2000

CMX 2000Va 2500 1000 3600

1 kHz, 0.1% THD *1 kHz, 1% THD

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

100V

-

600

2300

8Ω

200

300

500

1100

Stereo

4Ω

300

500

800

2000

Bridged

2Ω*

430

700

1200

4Ω*

830

1400

2400

2500 5000

18 Amplifiers

RMXa Series

Entertainers | Musicians | DJs | Concert Systems

RMXa 3RU Models

RMXa Series amps are built upon the proven RMX amplifier line combining legendary QSC reliability and audio performance in a cost effective power amplifier solution. For mid-power applications, the 2RU (RMX 850a, RMX

1450a, RMX 2450a) models feature 4Ω power ratings from 300 to 800 watts per channel. For premium loudspeaker systems with extremely high power capacity, the 3RU (RMX 4050a & RMX 5050a) models are unchallenged for their price and performance.

• Independent, defeatable clip limiters reduce distortion and protect speakers.

• Selectable low-frequency filters (30 or 50 Hz) protect speakers and increase headroom.

• Flexible output loading options that allow you to drive low impedance loads down to 2Ω.

• Five models to choose from with power ranges from 300W to

2000W per channel at 4Ω.

Amplifiers 19

RMXa 2RU Models

Watts per channel

Stereo

Model

RMX 850a

RMX 1450a

8Ω

200

300

4Ω

300

500

2Ω*

430

700

RMX 2450a

RMX 4050a

500

850

800

1400

1200

2000

RMX 5050a 1100 2000 2500

1 kHz, 0.5% THD *1 kHz, 1% THD

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

Bridged

4Ω

830

1400

2400

4000

5000

• Front panel gain controls s for fast and accurate level settings.

• Recessed rear DIP switches for easy selection between stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection.

• Balanced XLR, TRS or Barrier Strip parallel inputs with loop-through capability and NL4 or Binding Post output connectors.

20 Amplifiers

PLX2 Series

Entertainers | Musicians | DJs | Concert Systems

PLX2 is a powerful, lightweight amplifier line designed to meet the rigorous demands of live musicians, mobile entertainers, and portable PAs. The “02” models (1802, 2502, 3102, 3602) can drive loads down to 2Ω and include subwoofer or satellite crossover settings. For applications not requiring bridging, 2Ω operation, or internal subwoofer signal processing, “04” models (1104, 1804) deliver the same audio performance in a lighterweight, cost-effective unit. With third generation PowerLight ™ technology,

PLX2 amplifiers deliver superb audio quality with powerful low-frequency performance and feature a professional appearance with a die-cast aluminum front panel acting as an integral I-beam, to create an extremely rugged, road-worthy device.

• Active Inrush Limiting prevents AC mains circuit breakers from popping during turn-on.

• Front panel gain controls (1 dB detents) allow precise input sensitivity adjustment.

• Front panel LED status indicators enable system monitoring and troubleshooting.

• Balanced XLR and ¼" TRS parallel inputs accommodate the most commonly used input connectors for live sound and support loopthrough routing.

• speakON ® NL4 output connectors provide a positive-locking speaker connection. Channel 1’s output can use all four wires to connect to bi-amplified speakers with a single cable.

• Selectable low-frequency filter (33 Hz) protects speakers and increases headroom.

Amplifiers 21

PLX2 “02” Models

PLX2 “04” Models

Model

PLX1804

PLX1804

Watts per channel

Stereo

8Ω*

325

600

4Ω*

550

900

2Ω**

–

–

PLX1802

PLX2502

PLX3102

PLX3602

330

450

600

775

575

750

1000

1250

900

1250

1550

1800

*1 kHz, 0.1% THD, both channels driven

**1 kHz, 1% THD, both channels driven

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

1800

2500

3100

3600

–

–

Bridged

4Ω**

22 Amplifiers

GX Series

Entertainers | Musicians | DJs

GX Series amplifiers offer maximum performance, portability and reliability and a cost effective price. Ideally suited for use by entertainers, musicians and DJs, the GX line features three models; the GX3 (300W), the GX5

(500W) and the GX7 (700W) each uniquely designed to supply optimal power to the sound reinforcement loudspeakers most often used by entertainment professionals. A built-in crossover facilitates the use of subwoofers while front panel gain controls allow easy access for balancing the sub with the full-range cabinet. GuardRail ™ optimizes peak power and protects the system during the most demanding applications.

• Power levels matched to the most popular speakers used by entertainers.

• Optimized for maximum real-world headroom into 4Ω and 8Ω speaker systems.

• XLR, ¼" TRS and phono input connectors.

• speakON ® combo and Binding post output connectors.

• Detented gain controls for precise setting and matching of sensitivity.

• Lightweight – GX3 and GX5 less than 26 lb (12.5 kg); GX7 only 15.5 lb (7 kg).

GX5

Model

GX3

GX5

GX7

Watts per channel

8Ω

300

500

725

Both channels driven. 1kHz, onset of clipping

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

4Ω

425

700

1000

Amplifiers 23

24 Amplifiers

ISA Series

Installed Sound

ISA 500Ti

Model

ISA280

ISA450

ISA750

ISA1350

ISA300Ti

ISA500Ti

Watts per channel

70V* / 100V

-

-

-

1500††

300

500

8Ω**

185

260

450

800

185

260

4Ω**

280

425

ISA800Ti 800 450 650

*50 Hz – 16 kHz, 0.5% THD **20 Hz – 20 kHz, 0.1% THD †1 kHz, 1% THD

††Direct Output, 70V, less than 0.1% THD, 20 Hz – 20 kHz, +0/-0.3 dB

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

650

1300

280

425

2Ω†

430

700

1200

2000

430

700

1200

Amplifiers 25

ISA amplifiers are an ideal, cost-effective solution for fixed installation applications requiring distributed loudspeakers. There are seven models in the line, four low impedance models (ISA 280, ISA 450, ISA 750, ISA 1350) rated down to 2-ohm loads and three “Ti” versions (ISA 300Ti, ISA 500Ti,

ISA 800Ti) featuring isolated transformers for 25, 70 and 100 volt distributed audio systems. The DataPort V2 Lite connection facilitates the use of amplifier accessories (XC-3, LF-3 and SF-3.) providing economical crossover and subwoofer filtering solutions.

• Up to 2400W total output power.

• 3RU chassis with rear-mounted gain controls featuring

2 dB detents.

• Independent, defeatable clip limiters reduce distortion and protect speakers.

• Selectable high-pass filters protect against transformer saturation and driver overexcursion.

• Includes extensive DC, infrasonic, thermal overload, and short circuit protection.

• XLR and 3-pin Block input connectors and touch-proof barrier-strip outputs.

• DataPort V2 connector not compatible with Q-Sys,

BASIS or CM16a.

26 Amplifiers

Amplifier Accessories

DSP-3 | DSP-4 | DSP-30

The DSP-3 and DSP-4 are compact, 2-channel signal processing modules that can plug into the back of most DataPort-equipped QSC amps, conserving rack space and simplifying interconnections. Featuring 24-bit/48 kHz A/D converters, balanced inputs, and presets, these powerful little workhorses can also be mounted into a DPX-4 remote rack mounting bracket for use as a standalone, rack-mounted processing unit.

• Crossover filters: Bessel, Butterworth, Linkwitz-Riley.

• Compressors and limiters.

• Multiple parametric EQs.

• Precision attenuation (0.1 dB steps).

• High and low-shelf filters.

• Mix post-crossover audio (2-to-1 mixer).

• Multiple delays (up to 910 ms).

• Variable-frequency tone generator.

• Pink and white noise generators.

• Signal mute, splitter, and polarity reversal.

Amplifiers 27

The rack-mount DSP-30 shares the same features as the DSP-3 and includes

XLR connectors and a higher dynamic range sensitivity.

PC-based Signal Manager software uses simple drag-and-drop tools to:

• Configure the processing functions and signal flow.

• Display a graphical representation of DSP resources.

• Produce hardcopy printout of signal flow and/or parameter settings.

• Perform firmware upgrades via RS-232.

28 Amplifiers

Amplifier Accessories

XC-3 2-way Crossover | SF-3 Subwoofer Filter |

LF-3 Low-Frequency Filter

The XC-3 is an active, 2-way crossover module that mounts to the rear panel DataPort of select

2-channel QSC amps (DCA,PL2, PL3, CX, ISA). A

3-way crossover can be implemented using the

XC-3’s low-frequency high-pass filter with the LF-3.

• 4th order Linkwitz-Riley filters (24 dB/octave), low frequencies routed to channel 1 and highs to channel 2.

• All-pass filter delay for time alignment of low- and high-frequency drivers

• Trim control (0-20 dB attenuation) to balance the frequency bands.

• High-frequency channel offers boosts up to 10 dB for equalizing constantdirectivity horns.

The SF-3 provides subwoofer signal processing without the need for a conventional crossover.

To conserve cost and rack space, the unit mounts to the rear panel DataPort of select 2-channel QSC amps (DCA, PL2, PL3, CX, ISA).

• 4th order Linkwitz-Riley low-pass filter may be set to 80, 150 or 250 Hz.

• Subsonic filter offers roll-off frequencies in the range 20-50 Hz to prevent driver over-excursion.

• Trim control (0-20 dB of attenuation) allows balancing the various frequency bands.

Amplifiers 29

The LF-3 low-frequency filter, when used with the XC-3

2-way crossover, creates a 3-way active crossover system. Mounting to the rear panel of select, 2-channel

QSC amps (DCA, PL2, PL3, CX, ISA), the LF-3 is comprised of two discrete channels with 4th order

Linkwitz-Riley low-pass filters (24 dB/octave slope).

• Delay on each channel for loudspeaker time-alignment

• Trim control (0-20 dB of attenuation) to match levels.

• One amp-mounted LF-3 can support up to three amplifiers (including in stereo) with XC-3 installed accessories

30 Loudspeakers

K Series Active Loudspeakers

Portable/Production & Installed Sound

™

Ideal for portable/production and installed sound applications,

K Series loudspeakers feature a 1,000 watt, class D power module and onboard DSP that deliver levels of sonic clarity and total output that exceed expectations for systems of this size and weight. With three full-range models in the line (K8, K10 and K12) plus a subwoofer (KSub), users can select a model based on desired coverage angle for optimum performance.

• Combo XLR / 1/4" TRS inputs.

• Direct thru-puts and balanced summed output.

• RCA inputs (full-range models).

• On-board mixing of up to three audio sources.

• DEEP ™ provides extended low-frequency performance.

• Intrinsic Correction ™ ensures a flat sonic response.

• Rugged ABS enclosures (full-range models) with professional appearance.

• Monitor deployment angles on K10 and K12 models.

• Integrated M10 suspension points on full range models.

Loudspeakers 31

K8 K10

Frequency Range (-10 dB) 61 Hz – 20 kHz

Nominal Coverage (-6 dB) 105° conical

Input Connectors

56 Hz – 20 kHz

90° conical

Output 1 (Peak SPL @ 1M) 127 dB

Amplifier Power

Current Consumption

1/8 Power 2

1000 W continuous Class D

129 dB

1000 W continuous Class D

100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A

Driver Information

LF

HF

8" cone transducer

1.75" diaphragm compression driver

10" cone transducer

1.75" diaphragm compression driver

Balanced female XLR / 1/4" mic/line level input • Balanced female

XLR / 1/4" line level input •

Enclosure

Net Weight

K12

Frequency Range (-10 dB) 48 Hz – 20 kHz

KSub

44 Hz – 148 Hz

Nominal Coverage (-6 dB) 75° conical

Output 1 (Peak SPL @ 1M) 131 dB

1000 W continuous Class D Amplifier Power

Current Consumption

1/8 Power 2

N/A

130 dB

1000 W continuous Class D

100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A

Driver Information

LF

HF

Input Connectors

12" cone transducer

1.75" diaphragm compression driver

Dual 12" cone transducers

N/A

Balanced female XLR / 1/4" mic/ line level input • Balanced female

XLR / 1/4" line level input •

Dual balanced female XLR / 1/4" line level input

Enclosure

Net Weight 41 lb / 18.6 kg 74 lb / 33.6 kg

1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for LF-only and subwoofer systems) and peak power capability of amplifier.

2 1/8 power is representative of current draw with typical music program material with occasional clipping.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

32 Loudspeakers

KW Series Active Loudspeakers

Portable/Production & Installed Sound

™

Built on the highly successful K Series platform, KW Series loudspeakers feature a 1,000 watt, class D power module with onboard DSP housed in all birch wooden enclosures that deliver superior levels of sonic clarity and total output. With three full-range models in the line (KW122, KW152 and KW153) plus a subwoofer

(KW181), users can select a model based on desired coverage angle for optimum performance.

• Combo XLR / 1/4" TRS inputs.

• Variable mic/line input gain.

• Direct thru-puts and balanced summed output.

• RCA inputs (full-range models).

• On-board mixing of up to three audio sources.

• DEEP ™ provides extended low-frequency performance.

• Intrinsic Correction ™ ensures a flat sonic response.

• All birch plywood enclosures.

• Integrated M10 suspension points on full range models.

Loudspeakers 33

KW122

Frequency Range (-10 dB) 50 Hz – 20 kHz

KW152

43.7 Hz – 20 kHz

Nominal Coverage (-6 dB) 75° conical

Output 1 (Peak SPL @ 1M) 131 dB

1000 W continuous Class D Amplifier Power

Current Consumption

1/8 Power 2

60° conical

133 dB

1000 W continuous Class D

100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A

Driver Information

LF

HF

Input Connectors

12" cone transducer

1.75" diaphragm compression driver

15" cone transducer

1.75" diaphragm compression driver

Balanced female XLR / 1/4" mic/line level input •

Balanced female XLR / 1/4" line level input •

Enclosure

Net Weight

KW153

Frequency Range (-10 dB) 33 Hz – 20 kHz

KW181

34 Hz – 143 Hz

Nominal Coverage (-6 dB) 75° conical

Output 1 (Peak SPL @ 1M) 131 dB

1000 W continuous Class D Amplifier Power

Current Consumption

1/8 Power 2

N/A

130 dB

1000 W continuous Class D

100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A

Driver Information

LF

MF

HF

Input Connectors

15" cone transducer

6.5" mid range cone transducer

1.75" diaphragm compression driver

Balanced female XLR / 1/4" mic/line level input • Balanced female XLR / 1/4" line level input •

18" cone transducer

N/A

N/A

Dual balanced female XLR / 1/4" line level input

Enclosure

Net Weight 41 lb / 18.6 kg 74 lb / 33.6 kg

1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for LF-only and subwoofer systems) and peak power capability of amplifier.

2 1/8 power is representative of current draw with typical music program material with occasional clipping.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

34 Loudspeakers

KLA Series Active Loudspeakers

Portable/Production & Installed Sound

™

The KLA Series brings the power and sophistication of a line array system into an easy-to-use product, significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products. This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.

Loudspeakers 35

• 1,000 Watt Class D power module.

• Integrated XLR input with loop thru.

• 90˚ x 18˚ coverage (each enclosure).

• Integrated, easy-to-use rigging hardware allows for quick deployment.

• Ar-Q ™ (Arcuate Equalization) enables quick tuning of an array with the click of a switch.

• DEEP ™ provides extended low-frequency performance.

• Intrinsic Correction ™ ensures a flat sonic response.

• KLA12 features an ABS enclosure and KLA181 features a birch enclosure.

• Integrated M10 suspension points.

KLA12 KLA181

Frequency Range

(-10 dB)

Nominal Coverage

(-6 dB)

Output 1

(Peak SPL @ 1M)

Amplifier Power

Current Consumption

1/8 Power 2

Transducers

LF

HF

44 Hz – 20 kHz

90 x 18 degree

131 dB

500 W x 500 W continuous

33 Hz

N/A

135 dB

1000 W continuous Class D

100 VAC, 2.3 A • 120 VAC, 2.01 A • 230 VAC, 1.13 A

Input Connectors

Enclosure

Net Weight

12" cone transducer

1.75" diaphragm compression driver

Balanced female XLR line level input •

18" cone transducer

N/A

Impact resistant ABS

55 lbs / 25.0 kg

Painted birch plywood

104 lbs / 47.2 kg

1 Calculated for 1 m, based on sensitivity (full-space for full range systems and half-space for LF-only and subwoofer systems) and peak power capability of amplifier.

2 1/8 power is representative of current draw with typical music program material with occasional clipping.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

36 Loudspeakers

K Family Accessories

Totes, Covers, etc

Available K Series Accessories

• K8 Tote

• K10 Tote

• K12 Tote

• KSub Cover

• K8 Yoke

• K10 Yoke

• K12 Yoke

• K8 Outdoor Cover

• K10 Outdoor Cover

• K12 Outdoor Cover

• K Series Pole Extension

• M10 Kit-C

Available KW Series Accessories

• KW122 Cover

• KW152 Cover

• KW153 Cover

• KW181 Cover

• M10 Kit-W

• KW Suspension Kit 122

Available KLA Series Accessories

• KLA12 Tote

• KLA181 Cover

• KLA AF12 Array Frame Tote

• KLA AF12 Array Frame

• M10 Kit-C

Loudspeakers 37

38 Loudspeakers

ILA Series v2 Installation Line Array

Installed Sound

WL2802-i with WL118-sw using EB2082-i extension bar and FB2082-i fly-bar.

Designed for installation applications while retaining the performance of high-end touring line array systems, the ILA

System v2 takes this concept and builds on it by offering a complete and accessible solution consisting of processing, amplification, line array, subwoofer and suspension accessories. Built around the WL2082-i line array element, the system offers both flying (WL118-sw) or ground-stacked

(GP118-sw) subwoofer options.

Loudspeakers 39

WL2082-i

• Dual 8" diameter low-frequency drivers.

• Dual 44 mm (1.75 in) voice coil diameter, neodymium compression drivers with titanium domes.

• Patented* multiple aperture diffraction waveguide that provides extremely wide coverage (140º).

• Available in black or white and constructed from high impact polystyrene.

• May be used in outdoor applications where the system is not directly exposed to the elements.

*Patent No. 7,177,437

Frequency Range (-10 dB)

Nominal Coverage

Peak Output 2

Power Handling 1

HF

LF / MF / Bi-amp

Tri-amp

WL2802-i

68 Hz – 22 kHz

140° H

132 dB

100 W

400 W

200 W + 200 W

Driver Information

LF

HF

2 x 8" transducers; 2" voice coil; neodymium magnet

2 x 1.75" titanium diaphragm, neodymium magnet

2 x NL8 in parallel Input Connectors

Enclosure

Net Weight (each)

HiPS

37 lb / 16.8 kg

1 Continuous IEC specified test signal, 2 hours.

2 Calculated at 1 m using power capacity and system sensitivity.

6 dB peak-to-average signal ratio assumed.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

40 Loudspeakers

ILA Series v2 Installation Line Array (Cont’d)

Installed Sound

GP118-sw

GP118-sw Subwoofer

• 18" diameter low-frequency driver.

• 850W continuous power handling.

• Performance down to 29Hz.

• Integrated M10 suspension points.

• M20 threaded pole mount.

• Available in black or white and housed in a Birch plywood enclosure.

WL118-sw Subwoofer

• 18" diameter low-frequency driver.

• 850W continuous power handling.

• Performance down to 29Hz.

• Flyable on top or behind an ILA array.

• Available in black or white and housed in a Birch plywood enclosure.

Loudspeakers 41

WL118-sw

GP118-sw WL118-sw

Frequency Range (-10 dB) 29 Hz – 800 Hz 29 Hz – 800 Hz

Nominal Coverage

Peak Output 2

Power Handling 1

SUB

N/A

134.5 dB

850 W

N/A

134.5 dB

850 W

Driver Information

LF

HF

Input Connectors

Enclosure

Net Weight (each)

18" transducer, 4" voice coil, ferrite magnet

N/A

2 x NL8 in parallel and 2 x NL4 in parallel

Premium Birch Plywood

107 lb / 48.5 kg

1 Continuous IEC specified test signal, 2 hours.

2 Calculated at 1 m using power capacity and system sensitivity.

6 dB peak-to-average signal ratio assumed.

111 lb / 50.4 kg

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

42 Loudspeakers

WideLine-8 Line Array System

Concert Systems | Installed Sound

Designed for the most demanding concert and installation applications, the WideLine-8 system packs full size line array performance into an ultra compact package ideal for venues with height or sightline restrictions.

• Extraordinarily compact (only 20"

/ 508 mm wide) and lightweight

(38 lbs / 17.2 kg).

• High acoustic output

(133 dB SPL peak).

• Wide 140° horizontal coverage.

WL3082 shown hung from AF3082-S.

• High power, 8" neodymium LF /

MF drivers provide low-frequency extension to 62 Hz without subwoofers.

• 3" diaphragm compression driver on QSC’s patented 140° multiple diffraction aperture waveguide (Patent No. 7,177,437).

• Patented (D576,660) side-mounted vent ports designed for double duty as handles.

• Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor.

• Flexible ground stack capability.

• Fully supported in EASE and EASE Focus acoustic software.

Loudspeakers 43

WL3082

Frequency Range (-10 dB) 62 Hz – 20 kHz

Nominal Coverage

Peak Output 2

LF

MF

HF

Power Handling 1

LF

MF

HF

Driver Information

LF

HF

Input Connectors

Enclosure

140° H

128 dB

128 dB

133 dB

250 W

250 W

100 W

Dual, 8" woofer, 2.5" voice coil

1.4" exit, 3" diaphragm, neodymium magnet compression

2 x NL8

Premium Birch Plywood

Net Weight (each) 38 lb / 17 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Calculated at 1 m using power capacity and system sensitivity.

6 dB peak-to-average signal ratio assumed.

-10° 0° +10°

Four WL3082 on top of two WL212-sw.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

44 Loudspeakers

WideLine-8 Subwoofers

Concert Systems | Installed Sound

GP212-sw

GP212-sw

• Dual 12" subwoofer in a 4th order bandpass enclosure.

• 135 dB SPL peak output capability.

• Frequency range to 32 Hz (-10 db down point).

• Integrated M10 suspension points.

• M20 threaded pole mount.

WL212-sw

• Dual 12" subwoofer in a 4th order bandpass enclosure.

• 135 dB SPL peak output capability.

• Frequency range to 32 Hz (-10 db down point).

• May be suspended at the top of a WL3082 array or behind the array.

• Integral suspension hardware also supports WL3082 in ground stack applications.

Loudspeakers 45

WL212-sw

GP212-sw

Frequency Range (-10 dB) 32 Hz – 107 Hz

WL212-sw

32 Hz – 107 Hz

Peak Output 2

Power Handling 1

SUB

135 dB

850 W

135 dB

850 W

Driver Information

LF

Input Connectors

Enclosure

Net Weight (each)

Dual 12" transducers, 4" voice coil, ferrite magnet

2 x NL8 in parallel and 2 x NL4 in parallel

Premium Birch Plywood

99.5 lb / 45.1 kg 99.5 lb / 45.1 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Calculated at 1 m using power capacity and system sensitivity. Assumed 6 dB peak-to-average signal ratio.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

46 Loudspeakers

WideLine-10 Line Array System

Concert Systems | Installed Sound

The WideLine ™ WL2102-w is a compact, high-output, wide dispersion line array loudspeaker system renowned for its ability to meet and exceed requirements for applications ranging from corporate meetings to large venue reinforcement of highlevel popular music. From ballrooms to churches to concert venues, WideLine-10 is known for its full-range, warm, open, natural sound.

• Patented* multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source.

• Exceptionally high output capability in a very compact form factor.

• Bi-amp or tri-amp design.

WL2102-w shown hung from AF2102-LA.

• Dual 10" long excursion, high power, low-frequency transducers.

• Single 3" diaphragm neodymium compression driver.

• WL2102-w Birch ply construction offers reasonable weight

(83 lbs, 37.7 kg) at a lower cost.

• Fully captive hardware design incorporates all components necessary for box to box rigging.

Loudspeakers 47

WL2102-w

Frequency Range (-10 dB) 48 Hz – 20 kHz

Peak Output 2

LF / MF

Power Handling 1

HF

LF / MF Bi-amp

Tri-amp

133 dB / 133 dB

80 W

600 W

400 W + 400 W

Driver Information

LF

HF

Input Connectors

Enclosure

2 x 10" transducer, 3" voice coil, ferrite magnet

3" titanium diaphragm, neodymium magnet

2 x NL8

Baltic Birch Plywood

Net Weight (each) 83 lb / 37.7 kg

1 Continuous IEC specified test signal, 2 hours bi-amp mode unless otherwise stated.

2 Calculated at 1 m using power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.

Available WideLine-10 Accessories

• AF2102-LA: May be used to stack twelve (12) or fly twenty-four (24) WL2102-w.

• AF8-10: Adapter frame that allows suspension of

WL3082 under WL2012-w.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

48 Loudspeakers

WideLine-10 Subwoofers

Concert Systems | Installed Sound

Four WL218-sw shown hung from AF218-sw.

GP218-sw

WL218-sw

• Simple, convenient suspension system based on the proven QSC WideLine design. Supports up to 8 WL218-sw subwoofers with 10:1 design factor.

• Very high acoustic output capability - 139 dB SPL (1m) peak.

• Exceptional “punch” combined with low-frequency extension down to 31 Hz.

• Comprehensive transport and handling features including an easy to attach dolly and twelve thoughtfully placed handles.

• Premium-grade, long-excursion, high-power woofers with 4", fiberglass voice coils, double layer spiders and triple roll surrounds.

• Birch ply enclosure with independent, dual chambers and extensive internal bracing for rigidity and solid, accurate reproduction.

GP218-sw

• Very high acoustic output capability – 140.5 dB SPL(1m) peak.

• Tight musical “punch” combined with low-frequency extension down to 27.4 Hz.

Loudspeakers 49

• Elegant transport and handling features including an optional transport dolly plus soft cover and four thoughtfully placed handles.

• Premium-grade, long-excursion, high-power woofers with 4", fiberglass voice coils, double layer spiders and triple-roll surrounds.

• 18 mm Birch ply enclosure with independent, dual chambers and extensive internal bracing for rigidity and solid, accurate reproduction.

Available WideLine-10 Subwoofer Accessories

• AF218-sw: Array frame.

• CVR218: Soft cover for WL218-sw.

• CVRGP218: Soft cover for GP218-sw.

• CP218-0: Caster pallet for GP218-sw.

• CP218-1: Caster pallet for GP218-sw, includes a padded soft cover.

Frequency Range

(-10 dB)

Peak Output 2

Power Handling 1

GP218-sw

27.4 Hz – 1.2 kHz

(without processing)

140.5 dB

1700 W

WL218-sw

31 Hz – 1 kHz

(without processing)

139 dB

1700 W

Driver Information

LF

Input Connectors

Enclosure

Dual 18" transducers, 4" voice coil, ceramic magnet assembly

2 x NL4 in parallel

Baltic Birch Plywood

Net Weight (each) 191 lb / 86.6 kg — speaker only

204 lb / 92.5 kg — speaker only

244 lb / 110 kg — includes dolly

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Calculated at 1 m using power capacity and system sensitivity. Assumed 6 dB peak-to-average signal ratio.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

50 Loudspeakers

AcousticPerformance

™

Series

High power, installation loudspeaker

The AcousticPerformance ™ Series is a line of full-range / bi-amp loudspeakers ideal for a wide range of installed sound reinforcement applications requiring high fidelity and SPL output. The lineup features four models including three trapezoidal enclosures, the AP-5102, a 10" two-way, the AP-5122, a 12" two-way, the AP-5152, a 15" two-way and a single multipurpose enclosure the AP-5122m, a 12" two-way model.

• DMT ™ (Directivity Matched Transition) ensures smooth, coherent power response across the listening plane.

• 3" diaphragm compression delivers a clean and powerful high frequency response.

• M10 fittings and yoke mount fittings offer flexible deployment options for a variety of applications.

Loudspeakers 51

• Clean industrial design with unadorned grilles complement most decors and settings.

• NL4 speakON connector and covered barrier strip terminals*

• Bi-Amp / Passive Switchable.

• Constructed from 15-ply Baltic birch plywood.

• 16-Gauge powder coated steel grilles.

• Available in black (RAL 9011) and white (RAL 9010).**

• Complete EASE, CAD & BIM information available online.

* 5122m features dual NL4 Speakon Connectors

** 5122m Available in Black Only

52 Loudspeakers

AcousticPerformance

™

Series

High power, installation loudspeaker

AP-5102

Frequency Range (-10 dB) 60Hz – 18kHz

Power Capacity 450W / 54V continuous

System Sensitivity

Coverage Angle

94dB, 1W@1m

105˚ conical

Output 1 (Peak SPL @ 1M) 121 dB

Driver Information

LF

HF

254 mm (10-inch) driver with 76 mm (3-inch) VC;

450W / 54V (2 Hrs)

76 mm (3-inch) voice coil, compression driver;

72W / 24V (2 Hrs)

Rated Impedance 8Ω

Input Connectors Barrier Strip, NL4 connector

Enclosure

Net Weight

15-ply Baltic birch plywood

21.7 kg (48 lb)

1 2 hour rating using IEC60268 noise based on minimum impedance

2 Mid-band based on nominal impedance

AP-5122

48Hz – 18kHz

550W / 60V continuous

95dB, 1W@1m

90˚ conical

122 dB

305 mm (12in) driver with 102 mm (4in) VC;

450W / 60V (2 Hrs)

76 mm (3-inch) voice coil, compressiondriver;

72W / 24V (2 Hrs)

8Ω

Barrier Strip, NL4 connector

15-ply Baltic birch plywood

29.5 kg (65 lb)

Loudspeakers 53

AP-5152

Frequency Range (-10 dB) 44Hz – 18kHz

Power Capacity 625W / 65V continuous

System Sensitivity

Coverage Angle

96dB, 1W@1m

75˚ conical

Output 1 (Peak SPL @ 1M) 123 dB

Driver Information

LF 381 mm (15-inch) driver with 102 mm (4-inch) VC;

525W / 65V (2 Hrs)

HF 76 mm (3-inch) voice coil, compression driver;

72W / 24V (2 Hrs)

Rated Impedance

Input Connectors

Enclosure

Net Weight

8Ω

Barrier Strip, NL4 connector

15-ply Baltic birch plywood

36.2 kg (80 lb)

AP-5122m

55Hz – 18kHz

550W / 60V continuous

95dB, 1W@1m

90˚ conical

122 dB

305 mm (12-inch) driver with 102 mm (4-inch) VC;

450W / 60V (2 Hrs)

76 mm (3-inch) voice coil, compression driver;

72W / 24V (2 Hrs)

8Ω

Barrier Strip, NL4 connector

15-ply Baltic birch plywood

36.2 kg (80 lb)

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

54 Loudspeakers

New AcousticDesign

™

Series

Installation Surface-mount

AcousticDesign ™ S8T, S10T and S12 surface mount loudspeakers are professional, 70/100V, two-way, full-range systems ideal for a wide variety of foreground and background sound reinforcement applications. Ease-ofinstallation is the driving principle behind this next generation of small format, surface mount loudspeakers. Innovations found on new AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.

• DMT ™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area.

• Patent pending X-Mount ™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time.

• Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options.

• Block connectors allow pre-wiring of the system.

• Low saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only).

Loudspeakers 55

Patent-pending X-Mount ™ mounting system

• Lightweight ABS enclosures offer long-term durability and lasting good looks.

• Sealed input panel cover and powder coated aluminum grilles for added weather resistance.

• Meets IEC60529 IP-54 for dust and splash resistance.

• Available in black (RAL 9011) or white (RAL 9010).

• Complete EASE, CAD & BIM information available online.

56 Loudspeakers

New AcousticDesign

™

Series

Installation Surface-mount

AD-S8T

Effective frequency range 1 55 – 20k Hz

Rated noise power / voltage 2

200W / 40V (rms)

Broad-band sensitivity 3

Coverage Angle (-6 dB)

90 dB SPL

105° conical

Output 4 (Peak SPL @ 1M) 121 dB

Driver Information

LF 8" weather resistant paper cone woofer, 2" / 51mm voice-coil

AD-S10T

50 – 19k Hz

250W / 45V (rms)

92 dB SPL

90° conical

122 dB

10" weather resistant paper cone woofer, 2.5" / 64 mm voice-coil

HF

Rated Impedance

Input Connectors

Enclosure

Ingress protection

1" exit / 1.4" voice-coil compression driver

8Ω

Painted ABS polymer

IP-54

Net Weight 24.1 lbs / 11 kg

1 Free-field, -10 dB from on-axis sensitivity

2 IEC60268-1 noise signal for 2 Hrs

3 On-Axis, free-field sensitivity, 2.83V, 1 m

4 Calculated from rated noise voltage and sensitivity

1" exit / 1.4" voice-coil compression driver

8Ω

Euroblock connector with parallel output terminals

Painted ABS polymer

IP-54

31 lbs / 15 kg

Loudspeakers 57

AD-S12

Effective frequency range1 52 – 20k Hz

Rated noise power / voltage2

300W / 50V (rms)

Broad-band sensitivity3

Coverage Angle (-6 dB)

95 dB SPL

75° conical

Output 1 (Peak SPL @ 1M) 126 dB

Driver Information

LF 12" weather resistant paper cone woofer, 3" / 76 mm voice-coil

HF

Rated Impedance

Input Connectors

Enclosure

Ingress protection

Net Weight

1" exit / 1.4" voice-coil compression driver

8Ω

Euroblock connector with parallel output terminals

Painted ABS polymer

IP-54

35 lbs / 16 kg

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

58 Loudspeakers

AcousticDesign

™

Series

Installation Surface-mount

AD-S32T

Ideal for background and general purpose audio playback, the AD-S32T loudspeaker offers a full sound in a surprisingly small package. For outdoor applications, the plated screw input signal terminals can be sealed with the included weather cover while the 3-inch polypropylene woofer with synthetic rubber surround ensures reliable operation in high humidity. The aluminum grille backed with acoustically transparent foam protects the components from the elements.

• 3 inch polypropylene cone woofer.

• 0.75" titanium dome tweeter.

• 65Hz – 20kHz frequency response.

• 30W continuous power handling.

• Barrier strip connectors.

• 70/100 volt multi-tap transformer with 8 ohm bypass.

• Includes ball mount assembly and yoke mount.

• Enclosure is molded from high impact polystyrene (HiPS).

• Powder coated aluminum grille.

• Available in black or white.

Loudspeakers 59

AD-S52/ AD-S52T

Perfect for background/foreground music, paging, even secondary coverage in live performance venues, the AD-S52 and the AD-S52T are ideal small format surface mount loudspeaker solutions for spaces requiring accurate reproduction and audio quality. The loudspeaker’s sleek and contemporary styling allows it to easily blend into a variety of restaurant, retail, multimedia or other fixed installation settings.

• 5.25 inch weather resistant woofer.

• 1 inch neodymium tweeter.

• 60Hz – 20kHz frequency response.

• 60W continuous power handling.

• Binding post connectors.

• Low impedance (AD-S52) and 70/100 volt with 8 ohm bypass (AD-S52T) versions.

• Enclosure is molded from high impact polystyrene (HiPS).

• Powder coated aluminum grille.

• Available in black or white.

• Flexible Ball Mount Assembly Included.

• Available Optional Yoke Mount Bracket.

60 Loudspeakers

AcousticDesign

™

Series

Installation Surface-mount

AD-S82

The AD-S82 is a full range, surface mount loudspeaker featuring contemporary styling perfect for a variety of environments and applications.

Featuring the QSC IntelliDock ™ intelligent mounting system, this unique mounting system combines all the components needed to mount, wire, and position the speaker into a single housing independent of the loudspeaker enclosure.

• 8 inch weather resistant woofer.

• 1 inch pure titanium dome tweeter.

• Advanced Directivity ™ rotatable waveguide ensures accurately focused sound.

• 65Hz – 19kHz frequency response.

• 110W continuous power handling.

• Optional IntelliDock mounting system (AD-ID8) for low impedance, direct drive mode or with a 70V/100V transformer (AD-ID8T).*

• Optional yoke mounts (AD-YM8) for low impedance, direct drive operation and the (AD-YM8T) available for 70V/100V on constant voltage lines.*

• Enclosure is molded from high impact polystyrene (HiPS).

• Powder coated aluminum grille.

• Available in black or white.

*Choose one of two available mounting options

Loudspeakers 61

AD-S282H/AD-S282HT

For installations requiring additional low-frequency performance combined with higher acoustical output, the dual 8-inch AD-S282H / AD-S282HT is an ideal solution. Like the AD-S82, the AD-S282H / AD-S282HT features contemporary styling and is perfect for a variety of environments and applications.

• Dual 8 inch weather resistant woofer.

• 1 inch exit compression driver.

• Advanced Directivity ™ rotatable waveguide ensures accurately focused sound.

• 60Hz – 29kHz frequency response.

• 450W continuous power handling.

• Biamp switchable (AD-S282H).

• Barrier strip connectors.

• Low impedance (AD-S282H) and 70/100 volt with 8 ohm bypass

(AD-S282HT) versions.

• Enclosure is molded from high impact polystyrene (HiPS).

• Powder coated aluminum grille.

• Available in black or white.

• Yoke bracket included.

62 Loudspeakers

AcousticDesign

™

Series

Installation Surface-mount

Frequency Range

(-10 dB)

Power Capacity

System Sensitivity

Coverage Angle

Output 1

(Peak SPL @ 1M)

Driver Information

LF

HF

AD-S32T

65 Hz – 20 Hz

30 W (100 hrs)

85 dB

100° conical

105 dB

3" weather resistant, poly-propylene cone woofer

0.75" neodymium tweeter

AD-S52

60 Hz – 20 kHz

60 W (100 hrs)

86.5 dB

90° conical

110 dB

5.25" shielded, weather-resistant

1" neodymium tweeter

Rated Impedance

Input Connectors Screw terminals

5-way binding posts x 2

Enclosure

Net Weight 4 lb / 1.8 kg 15 lb / 6.8 kg

1 2 hour rating using IEC60268 noise based on minimum impedance

2 Mid-band based on nominal impedance

5-way binding posts x 2

18 lb / 8.2 kg

AD-S52T

60 Hz – 20 kHz

60 W (100 hrs)

86 dB

90° conical

105 dB

5.25" shielded, weather-resistant

1" neodymium tweeter

Loudspeakers 63

AD-S82 AD-S282H

Frequency Range

(-10 dB)

65 Hz – 20 Hz

Power Capacity 110 W (8 hrs)

System Sensitivity 90.5 dB

60 Hz – 20 kHz

450 W (8 hrs)

85 dB

90°H x 60°V (rotatable) 90°H x 60°V Coverage Angle

Output 1

(Peak SPL @ 1M)

Driver Information

LF

HF

117 dB

8" fiberglass cone,

1 1/4" voice coil

1" titanium dome tweeter, neodymium magnet

105 dB

Dual 8" high-power treated cone,

2" voice coil, neodymium magnet

1" high output compression driver

Rated Impedance

Input Connectors

Concealed 5-way binding posts x 2,

IntelliDock mounting/ connection system

Barrier Strip

(switchable: passive/bi-amp)

Enclosure

Net Weight 16.2 lb / 7.4 kg 27.7 lb / 12.6 kg

AD-S282HT

60 Hz – 20 kHz

450 W (8 hrs)

93 dB

90°H x 60°V

125 dB

Dual 8" high-power treated cone,

2" voice coil, neodymium magnet

1" high output compression driver

Barrier Strip

27.7 lb / 12.6 kg

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

64 Loudspeakers

AcousticDesign

™

AD-S28Tw

Installation Surface-mount

Designed and acoustically matched for use with AcousticDesign installation loudspeakers, the AD-S28Tw is a dual 8-inch surface mount subwoofer that complements any of the ceiling-mount or surface-mount AD Series fullrange models. Efficient band-pass design features one sealed chamber and a second, ported chamber that combine to produce extended low frequency reproduction.

• Dual 8 inch weather resistant polypropylene woofers provide exceptional resistance in high humidity environments.

• Bass extension down to 36Hz.

• Built-in, passive 120 Hz low-pass filter.

• 70/100 volt multi-tap transformer with 8 ohm bypass.

Loudspeakers 65

Frequency Range 1 (-10 dB)

Power Capacity

System Sensitivity

Output 2

2π (half space)

4π (full space)

Driver Information

LF

AD-S28Tw

36 Hz – 205 Hz

250 W (2 hours IEC)

94 dB, 2.83 V, 1 m, half space (2π)

124 dB SPL / 118 dB SPL

118 dB SPL / 112 dB SPL

Nominal Impedance

Input Connectors

Dual 8" (200 mm) weather resistant, polypropylene cone woofers, rubber surround

8Ω

4 position barrier strip; 2 in / 2 out

Enclosure

Environmental

Marine-grade plywood

Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529

IP-X4 splash rating

Net Weight 43 lb / 19.5 kg

1 All frequency ranges specified refer to measured free field response.

2 Calculated SPL at 1m, speaker operating at rated RMS power with pink noise within specified frequency range.

3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20 kHz band limiting,

6 dB signal crest factor.

• Marine grade plywood enclosure.

• Nickel plated screw terminals accept up to 12 AWG (2.053 mm2) wiring.

• Rubber feet allow floor or shelf deployment.

• Forged-shoulder eyebolts and steel yoke enable suspended installation (included).

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

66 Loudspeakers

AcousticDesign

™

Series

Installation Ceiling-mount

AD-C820R/S | AD-C821R/S

The AD-C820R/S and AD-C821R/S (R for Round Grille and S for Square

Grille) loudspeaker systems are designed for ceiling mounted loudspeaker applications requiring high SPL output. The AD-C820R/S Systems ship with the AD-C800BB backcan and are perfect for pre-installed applications. The

AD-C821R/S Systems incorporate a fully integrated, factory sealed enclosure and use “dog-ear” style mounting - perfect for blind mount installations. Both models also include a set of tile rails and C-rings to complete the installation.

• 8 inch low-frequency woofer with 1.4 inch diaphragm coaxially-mounted compression driver.

• 52Hz – 18kHz frequency range.

• 200W continuous power rating.

• 90˚ conical coverage.

• 70V/100V multi-tap transformer included with low impedance bypass.

• Ceramic input screw terminal complies with European safety standards.

• AD-C820 transducer/baffle assembly for separated backcan installation.

• AD-C821 designed as a fully integrated blind-mount system.

• UL Listed (UL 148 and UL 2043).

Loudspeakers 67

AD-C820/C821

Effective frequency range

Power Capacity

Sensitivity 2

1

Nominal Coverage

1 52 Hz – 18 kHz

200 W (100 hrs)

91 dB

90° conical

Output 3 (Peak SPL @ 1M) 120 dB

Driver Information

LF 8" weather resistant, treated cone woofer

AD-C1200

37 Hz – 18 kHz

300 W (100 hrs)

93 dB

85° conical

124 dB

12" weather resistant, treated cone woofer, 75 mm voice coil, ferrite magnet

HF

Rated Impedance

1.4" co-axial compression driver 1.75" co-axial compression driver

Input Connectors

AD-C820: Ceramic block

AD-C821: 4-pin Euroblock

Fire protective sub-chamber

Ceramic block terminals

Fire protective sub-chamber

Enclosure

Net Weight (each)

UL-rated steel backcans

17.5 lb / 7.9 kg 78 lb / 35.3 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

3 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.

Available AD-C Accessories

• ADC-MR4: Mud Ring Bracket for AD-C42T.

• ADC-NC4: New Construction Bracket for AD-C42T.

• ADC-MR: Mud Ring Bracket for AD-CI52T.

• ADC-NC: New Construction Bracket for AD-CI52T.

• ADC-MRS: Mud Ring Bracket for AD-CI52ST and

AD-C820R/S & AD-C821R/S.

• ADC-NCS: New Construction Bracket for AD-CI52ST and AD-C820R/S & AD-C821R/S.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

68 Loudspeakers

AcousticDesign

™

Series

Installation Ceiling-mount

AD-C1200

The AD-C1200 loudspeaker system is designed for ceiling mounted loudspeaker applications requiring high SPL output. The AD-C1200 features coaxial LF/HF transducers, a transformer and a crossover network factory-mounted on a steel baffle. The baffle is designed to mount to the QSC enclosure (AD-C1200BB) or to any 2.5 ft3 enclosure using industry-standard transducer / baffle mounting points.

• 12 inch low-frequency woofer with 1.75 inch diaphragm coaxially-mounted compression driver.

• 37Hz – 18kHz frequency range.

• 300W continuous power rating.

• 85˚ conical coverage.

Loudspeakers 69

Effective frequency range 1

Power Capacity 1

Sensitivity 2

Nominal Coverage

Output 3 (Peak SPL @ 1M)

Driver Information

LF

AD-C1200

37 Hz – 18 kHz

300 W (100 hrs)

93 dB

85° conical

124 dB

12" weather resistant, treated cone woofer,

75 mm voice coil, ferrite magnet

HF

Rated Impedance

1.75" co-axial compression driver

Input Connectors

Ceramic block terminals

Fire protective sub-chamber

Enclosure

Net Weight (each)

UL rated steel backbox

78 lb / 35.3 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

3 Calculated using specified power capacity and system sensitivity.

6 dB peak-to-average signal ratio assumed.

• 70V/100V multi-tap transformer included included with low impedance bypass.

• Ceramic input screw terminal.

• UL Listed (UL 148 and UL 2043).

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

70 Loudspeakers

AcousticDesign

™

Series

Installation Subwoofer Ceiling-mount

AD-C42T

The AD-C42T loudspeaker system is ideal for paging, background music and general purpose playback where a small, minimally intrusive footprint is desired. Designed for blind-mount applications, the

AD-C42T utilizes dog-ear mounting tabs and ships complete with

C-rings and tile rails.

• 4 inch low-frequency woofer with.75 inch titanium diaphragm domed tweeter.

• 60Hz – 20kHz frequency range.

• 40W continuous power rating.

• 100˚ conical coverage.

• 70V/100V multi-tap transformer included with low impedance bypass.

• Ceramic input screw terminal complies with European safety standards.

• UL Listed (UL 1480 / UL 2043).

AD-CI52T

The AD-CI52T loudspeaker system is ideal for paging, background music and general purpose playback where a small, minimally intrusive footprint is desired. Designed for blind-mount applications, the

AD-CI52T utilizes dog-ear mounting tabs and ships complete with

C-rings and tile rails.

• 5.25 inch low-frequency woofer with1inch titanium diaphragm domed tweeter.

• 65Hz – 20kHz frequency range.

• 40W continuous power rating.

• 90˚ conical coverage.

• 70V/100V multi-tap transformer included with low impedance bypass.

• 4-pin block input connector.

• UL Listed (UL 1480 / UL 2043).

Loudspeakers 71

AD-CI52ST

Similar to the AD-CI52T, the AD-CI52ST loudspeaker system features a large-ported enclosure offering extended low frequency response while its shallow depth is ideal for installations with limited mounting space.

Designed for blind-mount applications, background music and general purpose playback, the AD-CI52ST utilize dog-ear mounting tabs and ships complete with C-rings and tile rails.

• 5.25" low-frequency woofer with 1" titanium diaphragm domed tweeter.

• 53Hz – 20kHz frequency range.

• 40W continuous power rating.

• 90˚ conical coverage.

• 70V/100V multi-tap transformer included with low impedance bypass.

• 4-pin block input connector.

• UL Listed (UL 1480 / UL 2043).

AD-C81Tw

The AD-C81Tw is a ceiling mounted subwoofer designed for use with both ceiling-mount and surface mounts AcousticDesign loudspeakers. Like the smaller format, full-range models, the AD-C81Tw utilizes dog-ear mounting tabs and ships complete with C-rings and tile rails.

• 5.25" low-frequency woofer with 1" titanium diaphragm domed tweeter.

• 28Hz – 208Hz frequency range.

• 100W continuous power rating.

• 120Hz selectable low pass filter.

• 70V/100V multi-tap transformer included with low impedance bypass.

• 4-pin ceramic block input connector complies with European safety standards.

• UL Listed (UL 1480 / UL 2043).

72 Loudspeakers

AcousticDesign

™

Series

Installation Subwoofer Ceiling-mount

AD-C42T

Frequency Range (-10 dB) 60 Hz – 20 kHz

Power Capacity 1 40 W (100 hrs)

System Sensitivity 2

Coverage Angle

Output 3 (Peak SPL @ 1M) 110 dB

Driver Information

LF

HF

88 dB

100° conical

4" weather resistant, polypropelene cone woofer

Rated Impedance

0.75" titanium dome tweeter, rubber surround

Input Connectors

Enclosure

Net Weight (each)

Ceramic block or 4-pin

Euro terminals, fire protective sub-chamber

6.1 lb / 2.7 kg

AD-CI52T

65 Hz – 20 kHz

40 W (100 hrs)

86 dB

90° conical

108 dB

5.25" weather resistant, low distortion fiberglass cone woofer, 25 mm voice coil, neodymium magnet

1" titanium dome tweeter, rubber surround

4-pin Euro terminals, fire protective sub-chamber

7.5 lb / 3.4 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

3 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.

Loudspeakers 73

AD-CI52ST

Frequency Range (-10 dB) 53 Hz – 20 kHz

Power Capacity 1 40 W (100 hrs)

System Sensitivity

Coverage Angle

2 87.5 dB

100° conical

Output 3 (Peak SPL @ 1M) 109 dB

Driver Information

LF 5.25" weather resistant, low distortion fiberglass cone woofer, 25 mm voice coil, neodymium magnet

HF

Rated Impedance

1" titanium dome tweeter, rubber surround

AD-C81Tw

28 Hz – 208 Hz

100 W (100 hrs)

92 dB

N/A

118 dB

8" weather resistant, polypropelene cone woofer, rubber surround

N/A

Input Connectors

4-pin Euro terminals, fire protective sub-chamber

Ceramic block or 4-pin

Euro terminals, fire protective sub-chamber

Enclosure

Net Weight (each) 6.1 lb / 2.7 kg 7.5 lb / 3.4 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

3 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

74 Loudspeakers

Isis Series I-282H

Portable Loudspeaker

The QSC I-282H 2-way, full-range loudspeaker is ideal for applications requiring moderate levels and very high-quality sound reinforcement.

Pole mounted, truss mounted, or used as a floor monitor/stage fill, these injection molded speakers are an excellent choice for musicians, mobile entertainers, and anyone needing a high-quality, visually unobtrusive, passive loudspeaker system.

• Dual 8 inch weather resistant woofers

• 80Hz – 29kHz frequency response

• 450W continuous power rating

• 90˚x60˚ coverage

• NL4 input connectors

Loudspeakers 75

Frequency Range (-10 dB)

Power Capacity (passive)

System Sensitivity

Coverage Angle

Output 1 (Peak SPL @ 1M)

Driver Information

LF

I-282H

60 Hz – 29.5 kHz

450 W (8 hrs)

93 dB

90°H x 60°V (rotatable)

126 dB

HF

8" high power treated cone x 2,

2" voice coil, neodymium magnet

1" exit compression driver,

1.7" voice coil

Rated Impedance

Input Connectors NL4 in parallel x 2

Enclosure

Net Weight

HiPS

28.5 lb / 12.9 kg

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.

2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

3 Calculated using specified power capacity and system sensitivity.

6 dB peak-to-average signal ratio assumed.

• Pole or truss mounting deployment

• Floor monitor/stage fill

• 1.7" diaphragm compression drive mounted on an Advanced

Directivity ™ rotatable waveguide

• Bi-amp capable (rear-panel switch)

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

76 Digital | Network

The World’s Most Powerful Network Audio Solution

Core 1000 / 3000 / 4000

Q-Sys is the world’s most powerful yet simple network audio solution available... period. With the bandwidth to handle even the most complex configurations, Q-Sys is ready for any job, from boardrooms and clubs to airports and stadiums.

Built from the ground up on a powerful, open, IT-friendly foundation, the

Q-Sys platform transcends the limitations in scope, performance, and usability that keep other network audio control systems from reaching their full potential.

Enterprise Cores

The Q-Sys Core is at the heart of the Q-Sys system and runs QSC-developed

DSP algorithms under a customized Linux operating system running on Intel ® microprocessors and motherboards. This Intel hardware already meets industry-best reliability standards and is used in many of the world’s most mission-critical projects.

There are five Q-Sys Core models tailored to the meet the varying requirements of different facilities. For large scale installations, the Core 1000

(supports 128 flex channels), Core 3000 (supports 128 x128 channels) and

Core 4000 (supports 512 x 512 channels) are designed to work with one or more remote I/O Frames.

Digital | Network 77

Core 250i / 500i

Integrated Cores

The Core 250i/500i Integrated Cores bring the power of the larger Q-Sys

Cores to applications requiring lower channel count. Integrated Cores can accommodate up to eight internal Q-Sys input and/or output cards for a total onboard channel capacity of 32 channels (more if AES or CobraNet ™ cards are used). Channel count may be further expanded by the addition of Q-Sys

I/O Frames and other peripheral devices.

• Layer 3 networking ensures Q-Sys can run on the backbone of existing IT infrastructure eliminating the need for a dedicated audio network.

• Simple flexible architecture — Centralized processing allows the routing of any input to any output without variable-latency signal paths.

• Hardware-independent processing — advances in processing power are driven by advances in the global IT industry.

• Fewer potential failure points — digitally wired and routed signal paths within the processing Core maximizes system reliability and minimizes the number of required interconnections.

• System redundancy — all Cores can serve as a backup and upon sensing failure of the primary Core immediately assume all system functions ensuring fail-safe redundancy dependability for mission-critical applications.

78 Digital | Network

Network Amplifiers – CXD-Q Series

CXD4.3Q

Designed specifically for use with the Q-Sys Networked Audio System,

CXD-Q amplifiers marry the exciting new amp technology found in the

CXD/PLD platform with the powerful Q-Sys network processing and control system to create the perfect solution for installed applications.

The CXD-Q line includes three models (CXD4.2Q, CXD4.3Q & CXD4.5Q) capable of delivering robust, high-fidelity power to drive a wide range of loudspeaker configurations including 70V and 100V systems. By simply connecting the amplifiers via standard layer 3 Ethernet, the Q-Sys Core can route audio to/from the amps, as well as provide total control and monitoring of all amplifier functions. Flexible Amplifier Summing

Technology ™ (FAST) actively distributes total amplifier power across one, two, three or all four outputs enabling amp channels to be paralleled or bridged for maximum current and voltage output.

• Capable of providing up to 5,000W continuous and 8,000W peak with

70V / 100V direct drive on the CXD4.3Q and CXD4.5Q

• Flexible Amplifier Summing Technology ™ (FAST) permits total amplifier power to be distributed across one, two, three or all four channels

• With redundant Ethernet jacks, the CXD-Q amps seamlessly integrate with Q-Sys providing audio streaming directly to and from the amplifiers

Digital | Network 79

4 Ch

8Ω

4Ω

2Ω

2 Ch

8Ω

4Ω

2Ω

Burst

500 W

500 W

400 W

Burst

1000 W

1000 W

800 W

CXD4.2Q

Continuous

400 W

400 W

325 W

Continuous

800 W

800 W

650 W

1 Ch

8Ω

4Ω

2Ω

1Ω

Burst

2000 W

2000 W

2000 W

2000 W

Continuous

1600 W

1600 W

1600 W

1600 W

Weight 18.5 lb / (8.39 kg)

Burst

1000 W

1600 W

1250 W

Burst

3250 W

2000 W

3200 W

Burst

3650 W

6000 W

3500 W

6000 W

CXD4.3Q

Continuous

625 W

625 W

625 W

Continuous

1250 W

1250 W

1250 W

Continuous

2500 W

2500 W

2500 W

2500 W

21 lb / (9.53 kg)

Burst

1200 W

CXD4.5Q

2000 W

1600 W

Burst

4000 W

2350 W

4000 W

Burst

4550 W

7650 W

4450 W

7550 W

Continuous

1150 W

1250 W

625 W

Continuous

2250 W

2250 W

2100 W

Continuous

4200 W

4200 W

4250 W

3700 W

22 lb / (9.98 kg)

Burst Power - 20 ms 1 kHz sine burst, all channels driven

Continuous Power - EIA 1 kHz 1% THD, all channels driven

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

• Version 4.0 of Q-Sys designer includes the CXD-Q amps in the inventory and provides complete system wide design, as well as control and monitoring capability

• GPIO connectors on Euroblock enable additional functionality utilizing the intuitive and powerful Q-Sys control engine complete with logic functions and LUA scripting

• Input Euroblock connectors and touch-proof Euroblock loudspeaker connectors

• PowerLight universal switchmode power supply with Power Factor

Correction for highest efficiency, improved audio performance, and low weight

• Built-in energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality

80 Digital | Network

I/O Peripherals

I/O Frame front

The Q-Sys ™ I/O Frame provides the interface to other audio components

(including microphones, mixers and power amplifiers) and converts analog audio input signals to digital and passes them over the network. Highperformance A/D and D/A converters are used to ensure audiophile quality.

Each I/O Frame enables up to 16 channels of input and/or output by housing up to four cards, which may be mixed and matched in a single unit.

Mic/Line Analog

Input Card

I/O Cards

The following cards are available for both the integrated Cores (up to eight cards total) and the

I/O Frame: Analog Line

Output Card

AES-3 Digital

Input/Output Card

DataPort Output Card

• Mic/Line Analog Input

Card (CIML4/CIML4-HP)

— Four channels of switchable mic/line-level analog audio input with

48 V phantom power.

This input card provides the interface between

CobraNet ™ Digital

Input/Output Card

Q-Sys and input devices such as microphones, mixers, and CD/DVD players. The input card is

Dante ™ Network

Audio Bridge Card also available in a high performance version

(CIML4-HP) featuring broadcast quality pre-amps and A/D converters.

• Analog Line Output Card (COL4) — Four channels of balanced, line-level analog output for interfacing between Q-Sys and outboard equipment such as non-DataPort amplifiers, recording devices and teleconference systems.

Digital | Network 81

• AES-3 Digital Input/Output Card (CAES4) — Four input and four output channels of AES-3 digital audio for interfacing between Q-Sys and digital devices such as mixing consoles and recording devices.

• DataPort Output Card (CODP4) — Four audio output channels (2 DataPorts) for connection to DataPort equipped QSC amplifiers. The DataPort interface allows audio, status monitoring, and control between Q-Sys and QSC

DataPort power amplifiers.

• CobraNet ™ Digital Input/Output Card (CCN32) — Input/output interfacing with legacy CobraNet-based audio networks. The CobraNet card allows for several operating modes, 4x4, 8x8, 16x16, and 32x32. In an I/O Frame the

CobraNet card can be used in 4x4, 8x8, and 16x16 mode, whereas inserting it into a Core allows all these as well as the additional 32x32 mode.

• The CDN64 network bridge card provides a link for up to 32x32 channels at 48 kHz from any Dante ™ edge network, directly into a QSC Q-Sys

Core for advanced processing and redistribution over larger LAN and WAN IT infrastructures.

I/O-22

I/O-22

The Q-Sys I/O-22, is a compact, standalone unit designed for use when audio sources and destinations are physically spread out, such as the individual seats in a conferencing system or individual rooms in a multi-room venue. Providing two mic/line inputs and two line outputs, the I/O-22 is ideal for applications such as legislative or judicial chambers, meeting rooms, ballrooms, ancillary zones, classrooms, VIP suites, and stage patching.

• Connects directly to the Gigabit Ethernet network via redundant Q-LAN ports (RJ-45 Ethernet connectors).

• Powered via PoE (Power over Ethernet) or 24 Vdc.

• Includes an 8.5 watt mono amplifier to drive a local monitor speaker.

• Other connections include a scriptable RS-232 port and eight GPIO ports.

82 Digital | Network

Paging Peripherals

Q-Sys ™ offers a suite of tools that provide sophisticated paging and messaging functionality to support any sized paging application including convention centers, transportation terminals, theme parks and more. Q-Sys offers a number of paging-specific advantages that sets it apart from alternative approaches:

PS-X Paging Accessory

• Simple, integrated platform — Q-Sys enables paging with simplified bills of material including

Playback, Record, and Store-and-Forward.

• Ample paging capacity — With Cores supporting up to 1024 total network channels.

• Page Stations —built to withstand the riggors of daily use, all page stations are powered over

Ethernet and offer secure access, high-fidelity gooseneck or handheld microphones, and capacitive touch buttons.

• Scriptable control — allowing paging functions to be added or customized as needed.

• PA Router — supports live and delayed paging, scheduled messaging, announcement recording, live page routing, triggered playback, and event scheduling.

Q-Sys Networked Page Stations

Available with either gooseneck or handheld microphone (push to talk), the

Q-Sys Networked Page Station is a dual-port network device that is fully configurable from Q-Sys Designer. Each station connects to a Q-Sys system via

Q-LAN, which handles all audio deliveries to and from the station. Four

Networked Page Station models are currently available:

• PS-1600H/G — 16 buttons total, including four command buttons

(command code A-D). Also includes a numeric keypad and supports

Digital | Network 83

security features including automatic logoff time out, logon requirements, and user restrictions.

• PS-1650H/G — 16 command buttons (command code A-P).

All Page stations feature:

• Two Q-LAN network interfaces enabling connection to two switch ports or deployment on two separate networks.

• Capacitive touchpad that offers visible feedback and audible cues including illuminated status indicators.

• Built-in 240 x 64 monochrome graphics LCD display.

• Powered via PoE (Power over Ethernet) or external 24 Vdc.

• Rear panel auxiliary audio inputs can accommodate a secondary microphone.

• Auxiliary output can drive a local amplifier, powered loudspeaker or other destination device.

• GPIO interface can be configured to use external events to affect paging operation or be the source of events to affect external control systems.

• Designed for both desktop and wall-mounted installation and include either handheld (H) or gooseneck (G) microphone.

PS-X — a handheld paging accessory for any

Q-Sys Page Station provides a secondary remote microphone and is designed to fit into a standard U.S. 2-gang wall box.

Virtual Page Station – used in conjunction with a local control interface (TSC-3 or UCI

Viewer), an I/O-22 plus a microphone of choice emulates the functionality of the models listed above.

Gooseneck

Page Station

84 Digital | Network

Control Peripherals

Designed for true one-touch control of audio functions, Q-Sys also manages a wide variety of equipment utilizing built-in GPIO and TCP/IP instruction sets. With Q-Sys, nearly every audio processing parameter can be a command source or a command destination, for third-party control.

• User Control Interface tool — create custom control panels with Q-Sys

Designer’s UCI tool and operated from any computer on the network,

Wi-Fi connected iPad or iPhone. IP-based external control protocol ensures connecting with third-party controllers.

• UCI Viewer for PC workstations provides customized user control interfaces;

Designer’s administrator utility allows creates password and user access rights for each UCI.

TSC-3 Touchscreen

Digital | Network 85

User Control Hardware options

Q-Sys allows UCI screens to be hosted on QSC touch screen controllers, PC workstations, and iOS devices.

QSC Touch Screen Controllers

• TSC-3 - a 3.5 inch screen with 320 x 240 resolution, powered via PoE

(Power over Ethernet) and designed for flush mount installation in a standard U.S. 2-gang wall box, or surface mounting with the included kit.

iOS App Controller

86 Digital | Network

QSControl.net

™

Version 3

BASIS ™ | RAVE | DSP

Designed with system integrators, contractors, consultants and concert audio engineers in mind, QSControl.net encompasses seamless integration of networking, transport, control, processing and monitoring technologies.

Administration of a QSControl.net system is easily accomplished via a fully integrated graphical user interface that may be programmed and controlled via QSC’s Venue Manager software. QSControl.net products include the DSP

322ua signal processor, the NAC-100 Network Audio Controller and all BASIS and RAVE technology models.

DSP322ua

• Configurable DSP functions and signal paths.

• Fixed latency DSP engine.

• Ethernet controllable.

• Snapshots can recall config or block and/or parameter settings.

• 8x 3-pin Block input and 8x 3-pin output connector.

• Universal inputs – mic/line with pre-amps and phantom power.

• Matrix Mixers with up to 24 Inputs and Outputs.

• Gain Sharing Automixing with up to 22 inputs with direct outputs available for every input.

• Routing can accommodates any combination of inputs and outputs up to 24 x 24.

• Gain control up to 24 channels.

• Two, one, two-third and one-third octave ISO Graphic Equalizers; custom (choose number of bands, start frequency and end frequency).

• On-board Pink and White Noise Generators as well as, sine wave generator.

Digital | Network 87

• Crossovers including Linkwitz-Riley, Butterworth, Bessel-Thomson in-phase, Bessel-Thomson symmetrical and 2-way, 3-way and 4-way general purpose adjustable.

• Dynamics including compressors, peak limiters, dynamics processor and noise gates.

• Automatic Gain Control with music, speech and custom operating modes.

• Up to eight channels of simultaneous audio ducking with fade-in / out times up to 60 seconds (priority channel can also be part of the ducker’s output mix).

• Filters including high-pass, low-pass, all-pass, shelf, parametric, parametric shelf, Butterworth high and low-pass, Bessel-Thomson high and low-pass.

• Delays up to 910 milliseconds with units measured in time, meters or feet.

• User-definable custom blocks with password protection.

BASIS 904zz

• 8x HD-15 Data port connections

(CobraNet)

BASIS 914lz

• 8x HD-15 Data port connections

• 4x XLR/TRS combo inputs

BASIS 922az

• 8x 3-pin Block input connections

• 4x HD-15 Data port output connections

BASIS 922dz

• 4 AES/EBU pairs (8 channels)

• 4x HD-15 Data port output connections

BASIS 922uz

• 4 AES/EBU pairs (8 channels)

• 4x HD-15 Data port output connections

RAVE 522ua

• 8x 3-pin Block input and 8x 3-pin output connectors

88 Digital | Network

Network Audio Controller (NAC–100)

• Easily create intuitive user interfaces from within QSControl.net

™ .

• Capable of displaying custom bitmapped graphics.

• 16-bit, 3.5 inch (8.9 cm), backlit graphics display.

• Five navigation/ control switches and rotary encoder.

• Simple, single-wire connection using PoE (Power Over Ethernet).

SC28 System Controller

Digital | Network 89

The SC28 is a dedicated rack-mount, loudspeaker processor with optimized tunings for QSC WideLine loudspeakers. Advanced DSP incorporate IIR

(Infinite Impulse Response) as well as FIR (Finite Impulse Response) filters implement “Intrinsic Correction ™ ” of the loudspeaker resulting in the most accurate acoustical magnitude, frequency and phase domain performance possible. Optimized for use with or without subwoofer support, the SC28 features thermal and excursion protection for each transducer and the rearpanel USB port can be used to upload new loudspeaker tunings.

• 48 kHz, 24-bit A/D and D/A conversion with 32-bit, floating point DSP.

• Intrinsic Correction ™ actively adjusts time, frequency and amplitude response resulting in a maximally flat bandpass target across the entire sound field.

• Two (2) XLR line-level inputs.

• Eight (8) XLR line-level outputs.

• Six (6) parametric filters with adjustable frequency, gain and bandwidth.

• High and low shelf filters with adjustable frequency, gain and slope.

• Configures itself for optimal audio reproduction based on WideLine model and configuration selected.

• Amplifier / processor calibration for proper balance and loudspeaker protection.

• Adjustable Subwoofer delay up to 50.00 ms and array delay up to 20.00 ms.

90 QR Code Index

QR Menu

Quick Access to more information about products and Services

Mixers

TouchMix Series Portable Digital Mixers

Amplifiers

CXD Series

PLD Series

CX Series

PowerLight ™ 3 Series

QR Code Index 91

Amplifiers (continued)

CMXa Series

RMXa Series

PLX2 Series

GX Series

ISA Series

92 QR Code Index

QR Menu

Quick Access to more information about products and Services

Loudspeakers

K Series Active Loudspeakers

KW Series Active Loudspeakers

KLA Series Active Loudspeakers

WideLine Series

AcousticPerformance ™ Series

QR Code Index 93

Loudspeakers (continued)

AcousticDesign ™ Series (New)

AcousticDesign ™ Series Surface-mount

AcousticDesign ™ Series Ceiling-mount

Digital | Network

Q-Sys Cores

Network Amplifiers

94 QR Code Index

QR Menu

Quick Access to more information about products and Services

Digital | Network (continued)

I/O Peripherals

Paging Peripherals

Control Peripherals

QR Code Index 95

Digital | Network (continued)

QSControl

SC28 System Controller

Notes

qsc.com

please recycle

010914 ©2014 QSC Audio Products, LLC. All rights reserved. QSC, the QSC logo, House of K

PowerLight, WideLine, Q-Sys, QSControl.net and BASIS are registered trademarks of QSC Audio

Products, LLC, in the US and other countries. FAST, X-Mount, SOLO, Ar-Q, Tilt-Direct, GuardRail, DEEP,

DMT, AcousticDesign, IntelliDock, Advanced Directivity, Advanced Thermal Management and Intrinsic

Correction, are trademarks of QSC Audio Products, LLC. Intel and the Intel logo are trademarks of Intel

Corporation in the U.S. and/or other countries. CobraNet is a trademark of Cirrus Logic. Dante is a trademarks of Audinate Pty Ltd. PowerCON and Speakon are trademarks of Neutrik. All trademarks are the property of their respective owners. Multiple aperture diffraction slot waveguide US Patent number

7177437. Other patents may apply or be pending.