BBQ Grillware GPF2414NS Bbq And Gas Grill Owner's Manual
BBQ GPF2414NS is a propane gas grill designed for outdoor use, providing a safe and convenient grilling experience. With its durable construction and user-friendly features, this grill is perfect for creating delicious meals for family and friends. It offers precise temperature control for optimal cooking results, ensuring your food is cooked to perfection every time. The grill also includes multiple burners for simultaneous cooking of different foods. Enjoy the convenience of grilling with the BBQ GPF2414NS and elevate your outdoor culinary creations.
Advertisement
Advertisement
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause injury or property
damage.
Read the installation, operation and maintenance instructions thoroughly before installing or
servicing this equipment.
DANGER
Failure to follow these instructions could result in fire or explosion that could cause property damage, personal
injury or death.
ITEM # 122223
Deluxe LP Gas Grill
DANGER
DO NOT use gas grill for indoor cooking or heating. TOXIC fumes can accumulate and cause asphyxiation. DO NOT use in or
on boats or recreational vehicles.
PROP 65 WARNING
Chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm are created by the combustion of liquid propane gas
.
WARNING
FOR YOUR SAFETY:
For Outdoor Use Only.
(outside any enclosure)
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. IF YOU ARE ASSEMBLING THIS UNIT
FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM
OR HER TO SAVE FOR FUTURE REFERENCE.
FOR CUSTOMER SERVICE, EMAIL TO
OR
CALL 1-877-885-8227 (TOLL-FREE),
6 A.M. – 5 P.M.(PST),MONDAY-FRIDAY.
GSF2414NS
Owner’s Manual
Printed in China
.
Grill Operation 1-2-3
Before Grilling,
Step 1
Step 2
Step 3
Keep your grill a safe distance away from your property.*
Always Perform a Leak Test on all connections and hoses.*
Keep children away from the grill.
During Grilling,
(To avoid tripping safety valves, please follow these instructions carefully!)
Step 1
Step 2
Step 3
First open lid and turn gas valve on slowly.
Turn only one knob on at a time when lighting up the grill.
Use protective gloves when grill gets hot.
After Grilling,
Step 1 Burn grill for 10-15 minutes to burn off food residues.
Step 2 Wait until the grill is completely cooled before closing lid.
Step 3 Clean up grease build-up and cover your grill.
* Please refer to the owner’s manual for details.
WARNING
FOR YOUR SAFETY
1. DO NOT store or use gasoline or other flammable vapors and liquids within 25 feet of this or any other appliance.
2. When cooking with oil/grease, do not allow the oil/grease to exceed 50°F
(177°C).
3. Do not store or use extra cooking oil in the vicinity of this or any other appliance.
WARNING
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open lid.
4. If odor continues, immediately call your gas supplier or fire department.
Always read and understand the
WARNINGS
and
INSTRUCTIONS
that are contained in this manual before attempting to use this gas barbecue grill, to prevent possible bodily injury or property damage.
Always keep this manual in or near the grill, for convenient future reference.
GPF2414NS
Owner’s Manual
1
Table of Contents
For Your Safety ...................................................................................................3
Illustrated Parts List .............................................................................................5
Hardware List ......................................................................................................6
.
Assembly Instructions ........................................................................................7
Operating Your Grill ...........................................................................................14
Propane tank Connection ...................................15
Checking for Leaks ............................................15
Lighting Your Grill ...............................................15
Excess flow safety valve reset procedure ………17
Care and Maintenance .......................................18
Award-Winning Barbecue Recipes ..................................................................19
Troubleshooting .................................................................................................20
Warranty Program .............................................................................................22
GPF2414NS
Owner’s Manual
2
For Your Safety
Dear Valued Customer,
Congratulations on your new barbecue grill purchase! You’ve made the right choice. In this manual, you will find assembly instructions, suggestions for grilling and helpful hints, as well as guidelines for the safe operation, proper care and use of your grill. Our expert staff strives to provide you with an easy to assemble product. Should you have any questions or problems with this product, please call our customer service department at 1-877-885-8227
6:00 am - 5:00 pm (PST), Monday through Friday.
NOTE:
The use and installation of this product must conform to local codes. In the absence of local codes, use the
National Fuel Gas Code, ANSI Z223.1/ NFPA54.
IMPORTANT NOTICE: READ ALL INSTRUCTIONS PRIOR TO ASSEMBLY AND USE
Safety First!
Read and understand all warnings and precautions prior to operating your grill.
WARNING
1. This grill is for outside use only. It should not be used in a building, garage or any other enclosed area.
2. The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely operate this appliance.
3. Always open the grill lid carefully and slowly as heat and steam trapped within the grill could cause severe burns.
4. Always place your grill on a hard and level surface far away from combustible materials and structures. An asphalt or blacktop surface may not be acceptable for this purpose.
5. Do not leave a lit grill unattended.
6. Keep children and pets away from the grill at all times.
7. This is not a tabletop grill. Do not place this grill on any type of tabletop surface.
8. Do not use the grill in high winds.
9. This grill must be use with propane gas only.
10. Do not attempt to attach this grill to the self-contained propane system of a camper, trailer, motor home or house.
11. Do not use charcoal or lighter fluid.
12. Do not use gasoline, kerosene or alcohol for lighting. The LP-gas supply cylinder must be constructed and marked in accordance with the specifications for propane gas cylinders of the U.S. Department of Transportation (DOT) CFR 49.
13. This outdoor gas appliance is not intended to be installed in or on recreation vehicles and/or boats.
14. Do not attempt to move the grill while it is lit.
15. Do not use the grill unless it is
COMPLETELY
assembled and all parts are securely fastened and tightened.
16. Keep combustible items and surfaces at least 24 inches away from the grill at all times. DO NOT use this gas grill or any gas product under any overhead enclosure or near any unprotected combustible constructions.
17. Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
18. Do not attempt to use or assembly with missing or damaged parts. Contact customer service for a replacement.
CAUTION-Prevention of Burns
1. To avoid burns, do not touch metal parts of the grill until they have completely cooled for at least 45 minutes or unless you are wearing protective gear such as pot holders, gloves, BBQ mittens, etc.
2. Do not alter the grill in any manner.
3. Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts or leaks, the hose must be replaced prior to operation. The replacement hose assembly should be in accordance with the manufacturer’s specifications.
4. Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
GPF2414NS
Owner’s Manual
3
Safe Locations for Use of This Outdoor Grill
DANGER
Never use this outdoor grill inside any building, garage, shed or breezeway, or inside any boat, trailer or recreational vehicle, to prevent a possible fire and to prevent the possibility of carbon monoxide poisoning or asphyxiation.
WARNINGS
Do not use this appliance under overhead combustible surface or covered area (e.g., awnings, umbrellas, porches or gazeboes).
Always confirm that this grill is not positioned under the overhang of a house, a garage or other structure before lighting it.
An overhang will serve to deflect flare-ups and radiated heat into the structure itself, which could result in a fire.
Always confirm that this grill is positioned more than 24 inches (61 cm) away from any combustible materials or surface before lighting it, and that no gasoline or other volatile substances are store in the vicinity of this grill.
(As the fig. shown on right).
24Inches
24Inches
The temperature of a grease fire or of the radiated heat might otherwise be sufficient to ignite nearby combustible or volatile substances.
Always locate this grill where there will be ample combustion and ventilation air, but never position it in the direct path of a strong wind.
Never allow the grill to operate while unattended, to prevent uncontrolled grease fires from erupting.
Never attempt to move this grill while it is in operation or while it is still hot, to prevent possible personal injury.
Never store or use gasoline or other flammable or volatile substances in the vicinity of this grill or in the vicinity of any other heating-generating appliance, because of the danger of starting a fire.
Always confirm that the installation of this grill conforms with the requirements of all local codes or, in the absence of applicable local codes, with either the National Fuel Gas Code, ANSI Z223. NFPA 54 or CAN/CGA-B149.2, Propane
Installation Code.
DANGER – Gas Safety
Liquid propane (LP) gas is flammable and hazardous if handled improperly. Become aware of its characteristics before using any propane product.
• Propane Characteristics: Flammable, explosive under pressure, heavier than air and settles in pools in low areas.
• In its natural state, propane has no odor. For your safety, an odorant has been added.
• Contact with propane could cause freeze burns to the skin.
• This grill is shipped from the factory for propane gas use only.
• Never use a propane cylinder with a damaged body, valve, collar or footing.
• Dented or rusted propane cylinders may be hazardous and should be checked by your propane gas supplier.
CAUTION
• It is essential to keep the grill’s valve compartment, burners and circulating air passages clean.
• Inspect the grill before each use:
Step 1
. Inspect all hoses and connections and make certain they are secure.
Step 2
Check and clean the burner venturi tubes for insects and insect nest by removing the burner and inserting a bottle brush cleaner into each tube to make sure the passage is clear.
*** A clogged tube can lead to a fire beneath the grill.
Step 3
Ensure that the valve nozzle is pointing straight and completely inserted into the venture tube.
GENERAL INFORMATION
1. A propane gas cylinder is required for operation.
2. This gas grill is NOT intended for commercial use.
GPF2414NS
Owner’s Manual
4
Illustrated Parts List
1. Bottom Front Panel ---1pc 2. Bottom Back Panel--1pc 3. Bottom Left Beam ---1pc 4. Bottom Right Beam-----1pc
5. Wheel caps-------------2 pcs 6.Wheels----------------2 pcs 7. Wheel Axle-------------1pc 8. Top Front -Panel----------1pc
9. Top Back Panel --------1pc 10. Top Right Beam----1pc 11. Top Left Beam ------1pc 12. Top Tank Hook----------1pc
13. Bottom Tank Hook----1pc 14. Control Panel-------1pc 15. Grill Body-------------1pc 16. Lid Handle----------------1pc
17.LB/RF Shelf Supports-----
-------------------------------2 pcs
18. LF/RB Shelf Supports
----------------------------2 pcs
19. Left Side Shelf-------1pc 20. Right Side Shelf---------1pc
21. Heat Plate--------------1pc 22. Cooking Grid---------1pc 23. Warming Rack--------1pc 24. Grease Cup Support---1pc
25. Grease Cup------------1pc 26. Heat Insulator-------1 pc 27. Tank Partition-------1 pc
GPF2414-NS
Owner’s Manual
5
A
Hardware List
M6 Bolts
35pcs
B
C
M6 Nuts
2pcs
D
E
M6 Spring Washers
2pcs
G
I
M10 Washers
M6 Fiber Washers
Hardware listed above is not scaled to exact size
(A screwdriver is included for your convenience.)
GPF2414-NS
Owner’s Manual
2pcs
4pcs
6
F
H
Screwdriver
M6 Washers
M10 Nuts
Wrench
6pcs
1pc
2pcs
1pc
Assembly Instructions
Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is fully assembled, go back and check to make certain all the bolts are tight. Tighten again with the screwdriver provided if it is necessary.
Estimated Assembly Time: It will take less than 40 minutes to assemble the grill.
Step 1
Align the holes on the bottom left beam (3) with the holes on the bottom back panel (2).
Screw a M6 bolt (A) into each pre-drilled hole and tighten by hand until secure.
Repeat the procedure for the other side on bottom left beam.
Align the holes on the bottom right beam (4) with the holes on the bottom front panel (1).
Screw a M6 bolt (A) with into each pre-drilled hole and tighten by hand until secure.
Repeat the procedure for another side on bottom right beam.
Go back and tighten all bolts with the screwdriver provided.
Step 2
Insert the wheel axle (7) go through the holes on bottom front panel and bottom back panel.
Insert a M10 washer (G), a wheel (6) and a M10 nut
(F) into shaft.
NOTE: protruding side of each wheel must face the direction of grill leg. Repeat the procedure on another side of the wheel axle.
Tighten the two M6 bolts by the wrench provided.
Insert the two wheel caps (5) into the two wheels.
GPF2414-NS
Owner’s Manual
7
GPF2414-NS
Owner’s Manual
Step 4
Align the holes at the top right beam (10) with the holes on the left side of step 3 assembly.
Screw a M6 bolt (A) into each pre-drilled hole.
Tighten by hand until secure.
Repeat the same procedure for the top left beam with the step 3 assembly.
Tighten by hand until secure.
Go back and tighten all bolts with the screwdriver provided.
8
Step 3
Loosen the screw on the bottom back panel.
Align the narrow holes on the top back panel (9) with the holes on the bottom back panel.
Tighten the loosen bolts by hand until secure.
Repeat the procedure for top front panel (8) with bottom front panel.
Go back and tighten all bolts with the screwdriver provided.
Step 6
Align the holes on the top right panel with the holes on the control panel.
Screw a M6 bolt (A) into each pre-drilled hole.
Tighten all bolts by screwdriver provided.
GPF2414-NS
Owner’s Manual
9
Step 5
Align the holes on the top tank hook (12) with the holes on the top right beam.
Screw a M6 bolt (A) into pre-drilled hole.
Tighten by hand until secure.
Align the holes on the bottom tank hook (13) with the holes on the bottom right beam.
Screw a M6 bolt (A) into pre-drilled hole.
Tighten by hand until secure.
Go back and tighten all the bolts with the screwdriver provided.
Step
Open the top lid.
Insert the two bolts on the lid handle (16) into the holes on the front of the top lid.
Insert the heat insulator (26), a M6 washer (D), a spring washer (E) and a M6 nut (C) into each bolt.
Tighten the M6 nut with the wrench provided.
GPF2414-NS
Owner’s Manual
10
Step 7
Open the top lid.
Align the holes on the any one corner of grill body assembly with the hole on the step 6 assembly.
Screw a M6 bolt (A) with a M6 washer (D) and M6 fiber washer (I) into the pre-drilled hole.
Tighten by hand until secure.
Repeat the procedure for another three corners of grill assembly.
Go back and tighten all the bolts with the screwdriver provided.
.
Step 10
Loosen the four pre-attached bolts on the back of left side shelf (19).
Align the holes into the holes on the LB/RF and LF/RB shelf support.
Push the left side shelf towards the grill center until the bolts are in the narrow part of the holes on the shelf supports.
Tighten by hand until secure.
Repeat the procedure for right side shelf support (20).
Go back and tighten all the bolts with the screwdriver provided.
GPF2414-NS
Owner’s Manual
11
Step 9
Align the holes on the LB/RF shelf support (17) with the holes on the left back side of the grill body.
Screw a M6 bolt (A) into each the pre-drilled hole.
Tighten by hand until secure.
Repeat the procedure for LF/RB (18) shelf support.
Align the holes on the tank partition (27) with the holes on the LB/RF shelf support (17) and the holes on the right front side of the grill body.
Screw a M6 bolt (A) into each pre-drilled hole.
Tighten by hand until secure.
Repeat the procedure for LF/RB (18) shelf support.
Go back and tighten all the bolts with the screwdriver provided.
Step 12
Insert the four ends of the warming rack (23) into the holes on the top lid and grill body.
GPF2414-NS
Owner’s Manual
12
Step 11
Open the top lid.
Place the heat plate (21) on inside of the grill.
Place the cooking grid (22) upon the heating plate.
GPF2414-NS
Owner’s Manual
Step 14
Place the gas tank on the top tank hook and bottom tank hook.
Screw the gas regulator into the gas tank valve.
Make certain the connection between the gas regulator and gas tank valve is secure.
13
Step 13
Hook the grease cup support (24) into the grooves beneath the grill body.
Place the grease cup (25) on the grease cup support.
Fully Assembled View
Operating the Grill
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of unauthorized parts can create an unsafe condition and environment.
The propane gas supply cylinder used must be constructed and marked in accordance with the
Specifications for Propane
Gas Cylinders
of the U.S. Department of Transportation (DOT). Only cylinders with a listed overfill prevention device
(OPD) and marked “propane” may be used. Cylinders with an OPD will have valve handles with three “lobes” (prongs).
The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Only use 20 pound cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances. The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or handled roughly. If the appliance is not in use, the gas cylinder must be disconnected.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance.
Cylinders must be stored outdoors and out of the reach of children. Cylinder must not be stored in a building, garage or other enclosed area. Your cylinder must never be stored where temperatures can reach over 125F.
Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of the burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the regulator valve when the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill. The propane cylinder must be arranged for vapor withdrawal and equipped with a listed overfill prevention device (OPD).
Danger: A fire causing death or serious injury may occur if the following is no followed exactly:
Never store or use gasoline or other volatile substance in the vicinity of this grill.
Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another potential heat source.
Never fill the propane cylinder beyond 80% full.
Warning: No Spare Gas Store
GPF2414NS
Owner’s Manual
14
LP (Propane) Gas Supply Connection
1. Always place the propane cylinder on the tank brackets located on the right side of the cart.
2. Always confirm that all burner control knobs are in the OFF position before activating the gas supply.
3. Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve, or in the head of the burner and burner ports.
4. Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the connection collar by turning it clockwise with one hand while holding the regulator with the other.
(As the fig. shown on right)
5. Disconnect the propane cylinder from the regulator valve when the grill is not in use.
6. Do not obstruct the flow of combustion air and ventilation air to the grill.
DANGER
To prevent fire or explosion hazard when testing for a leak:
1. Always perform the “leak test “on page 16 before lighting the grill and each time the cylinder is connected for use.
2. Do not smoke or allow other sources of ignition in the area while conducting a leak test.
3. Conduct the leak test outdoors in a well-ventilated area.
4. Do not use matches, lighters or a flame to check for leaks.
5. Do not use grill until all leaks have been sopped, if you are unable to stop a leak, disconnect the propane supply, and call for gas appliance service or your local propane gas supplier.
Checking for Leaks
1. Make a 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water.
2. Make sure control knobs are in the “OFF” position.
3. Spray some solution on the tank valve up to the regulator connection.
(As the fig. shown on right).
4. Inspect the solution at the connections, looking for bubbles. If no bubbles appear, the connection is secure. .
5. If bubbles appear, you have a leak. Go to step 6.
6. Disconnect the regulator from the tank and reconnect, make sure the connection is secure.
7. Retest with solution.
8. If you continue to see bubbles, replace the cylinder.
Lighting Your Grill
Danger:
Failure to open lid while igniting the barbecue’s burners or not waiting 5 minutes to allow gas to clear if the barbecue does not light ,may result in an explosion, which could cause serious bodily injury or death.
WARNING
: Never stand with your head directly over the grill when preparing to light the main burners, to prevent possible bodily injury.
Main Burner
1. Open lid while lighting burners.
WARNING
: Attempting to light the burner with the lid closed may cause an explosion. Make sure there are no obstructions of airflow to the gas unit. Spiders and insects can nest and clog the burner/venturi tube at the orifice. A clogged burner tube can lead to a fire beneath the appliance.
2. All valves must be in the “OFF” position.
3. Open cylinder valve.
4. Ignite only the burners you wish to use, using the same method for each:
Push desired burner valve knob and rotate slowly about 1/4 counter-clockwise until a click is heard. The burner should light. If the burner does not light, return the valve knob to the “OFF” position immediately. Wait five minutes for the gas to clear and repeat the procedure. After burner is lit, repeat the procedure with any other burner desired.
5. Adjust valve knob(s) to desired cooking temperature.
GSF2616JB
Owner’s Manual
15
Using the Lighting Stick to Light the Main Burners
1. Remove the cooking grid from the burner you wish to light.
2. Insert a match into the end of lighting stick. Light the match.
3. Once lit, place the flame through the hole on grill body to reach the burner ports.
(As the fig. shown on right side).
4. Press the valve knob and rotate it counter clockwise to the ‘’HIGH’’ position. The burner should light immediately. If more than one burner is desired, repeat the procedure for each burner.
5. Replace cooking grid and adjust burners to the desired cooking temperature.
Precautions
1. After lighting, please observe the burner flame. Make sure all burner ports are lit.
2. If the burner flame goes out during operation, immediately turn the gas “OFF”. Open lid to let the gas clear for at least
5 minutes before re-lighting.
3. Before cooking on the grill for the first time, operate the grill for approximately 15 minutes with the lid closed and the gas turned on “HIGH”. This will “heat clean” the internal parts, dissipate odor from the manufacturing process and painted finish.
4. Clean the grill after each use. DO NOT use abrasive or flammable cleaners. This may damage parts of the grill and cause a fire.
Side Burner
1. Open lid while lighting the burner. Lid must remain open while burner is lit.
2. Valve must be in the “OFF” position.
3. Open cylinder valve.
4. Push side burner knob fully and rotate it slowly about 1/4 counter-clockwise until a click is heard. The burner should light. If the burner does not light, turn the knob to the “OFF” position immediately. Wait five minutes for the gas to clear and repeat the procedure.
5. Adjust valve knob to the desired cooking temperature
2 in.
1 in.
0 in.
Observe flame height when lit:
Flame should be a blue/yellow color between 1 to 2 inches high.
Confirm that the burner is properly lit and that the flame pattern is as desired, (see fig. A, B and C below for the proper flame patterns).If the flame pattern is other than normal, consult the troubleshooting guide on page 20 for corrective action.
FIG. A FIG. B
Normal: Soft blue flames with yellow tips between I inch - 2 inches high.
Out of adjustment: Noisy hard blue flames – too much air.
GPF2414NS
Owner’s Manual
16
FIG. C
Poor combustion: Wavy, yellow flames- too little air.
Flare-ups
“Flare-ups” sometimes occur when food drippings fall onto the hot heat distribution plate or burners and ignite. Some flaring is normal and desirable, as it helps impart the unique flavors associated with grilled foods. Controlling the intensity of the flare-ups is necessary, however, in order to avoid burned or unevenly cooked foods and to prevent the possibility of accidental fire.
WARNING: Always monitor the grill closely when cooking and turn the flame level down (LOW) of OFF, if flareups intensify
Shutting Off Burners
•
Always turn the valve knob(s) clockwise to the ‘’HIGH’’ position, then press and turn it to ‘’OFF’’. Never force the knob without pressing it. This could damage the valve.
•
Promptly turn the gas supply to the “OFF” position at the propane cylinder.
• Close the lid of the grill.
Excess flow safety valve reset procedure
•
The new regulators are equipped with a safety device that restricts the gas flow in the event of a gas leak.
However, unsafe practices of grill operation could activate the safety device without having a gas leak.
•
A sudden shut off of the gas flow typically occurs if you open the LP tank valve rapidly, or if one or more of the burner control knobs is in an open position when opening the LP tank valve.
•
This procedure is effective with all LP Tank sizes as well as Natural Gas. When performing the procedure on a
Natural Gas model, simply substitute "Natural Gas valve" for "LP Tank".
•
To ensure the procedure is safely and is successfully performed, please carefully follow the instructions below.
1. Close the LP tank valve.
2. Turn all burner control knobs to the OFF position.
3. Disconnect the regulator from the LP tank.
4. Open the lid of the grill.
5. Turn burner control knobs to HIGH.
6. Wait at least 1 minute.
7. Turn burner control knobs OFF.
8.
Wait for at least 5 minutes
.
9. Re-connect the regulator to the LP tank.
10.
SLOWLY
turn the LP tank valve at ¼ turn at a time and have the valve all the way open.
11.
With the lid open
, For BBQ with
ignition button
:
ONLY
turn on
ONE
front burner control knob to the
HIGH position. Ignite the grill by pushing the ignition button. For BBQ with an
automatic ignition
: Push down the control knob you want to light, turn counter clock wise until you hear the ignition click.
12. After the first front burner is lit, turn on the other control knob(s) to the HIGH position. **If you have more than two burners,
ONLY
turn them on
ONE AT A TIME.
13. When all front burners are lit, close the BBQ lid
14. Wait for 10-15 minutes, the temperature should reach 400 – 450 F°
GPF2414NS
Owner’s Manual
17
Care and Maintenance
IMPORTANT
Always allow to completely cool off before covering your grill to prevent corrosion from condensation
Caution:
All cleaning and maintenance should be done when the grill is cool, with the fuel supply turned off at the control dial and the propane cylinder disconnected. DO NOT clean any grill part in a self-cleaning oven. The extreme heat will damage the finish.
Cleaning
Burning off the grill after every use (approx. 15 minutes) will keep excessive food residue from building up.
Recommended cleaning materials
-
Mild dishwashing liquid detergent
Nylon cleaning pad
Paper clip
Compressed air
Hot water
Wire brush
Putty knife/scraper
DO NOT use cleaners that contain acid, mineral spirits or xylene.
Outside surfaces
Use a mild dishwashing detergent and hot water solution to clean. Rinse thoroughly with water.
Inside surface
If the inside surface of the grill lid has the appearance of peeling paint, baked on grease has turned to carbon and is flaking off. Clean thoroughly with a strong solution of detergent and hot water. Rinse with water and allow it to completely dry.
Interior of grill bottom – Remove residue using brush, scraper and/or cleaning pad. Wash with a dishwashing detergent and hot water solution. Rinse with water and let dry.
Cooking Grids – The porcelain grates have a glass-like composition that should be handled with care. Use a mild dishwashing detergent or baking soda and hot water solution. Non-abrasive scouring powder can be used on stubborn stains. Rinse with water.
Heat Plates – Clean residue with wire brush and wash with soapy water. Rinse with water.
Grease Cup – Periodically empty the grease cup and clean with a dishwashing detergent and hot water solution.
Cleaning the Burner Assembly
1. Turn gas off at the control knobs and propane tank.
2. Remove cooking grids and heat plate.
3. Remove grease cup.
4. Remove burner by unscrewing nut from beneath burner “foot” using a screwdriver and pliers.
5. Lift burner up and away from the gas valve orifice.
6. Clean inlet (venturi) of burner with small bottle brush or compressed air.
7. Remove all food residue and dirt on outside of burner surface.
8. Clean any clogged ports with a stiff wire (such as an opened paper clip).
9. Inspect burner for damage (cracks or holes). If damage is found, replace with a new burner. Reinstall burner.
Check to ensure the gas valve orifices are correctly positioned, pointing straight into burner inlet (venturi).
Also, check position of spark electrode.
GPF2414NS
Owner’s Manual
18
Award-Winning Barbecue Recipes
Never-fail Barbecue Sauce
Ingredients:
¼ cup
2 tablespoons
¼ cup
Finely chopped onion
Butter or margarine
Brown sugar, firmly packed
Hardcore Grilled Trout
Ingredients:
¼ cup
2 tablespoons
2 tablespoons
2 tablespoons
Lemon or lime juice
Melted butter
Vegetable oil
Chopped parsley
1 tablespoon
¼ teaspoon
1
1 cup
¼ cup
1 teaspoon
Worcestershire sauce
Hot sauce
Garlic clove, finely chopped
Catsup
Lemon juice
Prepared mustard
Prepare:
Cook onion and garlic in margarine until tender. Add remaining ingredients and bring to a boil. Simmer uncovered 15 to 20 minutes. Refrigerate leftovers after use.
Mamma’s Marinated Chicken
Ingredients:
¼ cup
2 tablespoons
1 ½ teaspoons
½ teaspoon
¼ teaspoon
4
Dijon mustard
Fresh lemon juice
Worcestershire sauce
Dried tarragon
Freshly ground black pepper
Boneless, skinless chicken breast halve
Prepare:
Combine ingredients, mixing well. Marinade chicken for several hours. Grill uncovered, over medium heat, for 10 to 15 minutes. Chicken is done when juices run clear.
1 tablespoon
½ teaspoon
Hot sauce
Ground ginger
½ teaspoon Salt
4 brook trout -- about 1 pound each
Prepare:
Combine lemon juice, margarine, oil, parsley, hot sauce, ginger and salt. Mix well. Pierce skin of fish in several places. Roll fish in juice mixture to coat inside and out. Cover and refrigerate 30 minutes to 1 hour, turning occasionally. Remove fish from marinade. Place fish on grill; brush fish with marinade while grilling. Cook over high heat for 5 minutes. Turn and brush with marinade.
Cook 5 minutes longer. Fish is done when it flakes easily with fork.
Grilled Veggies
Ingredients:
¾ cup
¼ cup
1 teaspoon
1 teaspoon
Olive oil
Red wine vinegar
Fresh rosemary
Fresh thyme leaves
Barbecued Honey Steak
Ingredients:
5 pounds
2 tablespoons
1 teaspoon
2
1 large
1 cup
Beef sirloin steak
Red pepper -- crushed
Black pepper
Garlic cloves -- crushed
Onion
Honey
Prepare:
Combine all ingredients and marinate steak for 7-8 hours. Remove meat from marinade and grill over very high heat to desired doneness. Heat leftover marinade to a boil and pour over grilled steak to serve.
GPF2414NS
Owner’s Manual
19
1 teaspoon
1 teaspoon
1 tablespoon
½ teaspoon
Fresh basil, chopped
Fresh oregano, chopped
Minced garlic
Salt
½ teaspoon Ground black pepper
2 pounds assorted vegetables, chopped or whole according to taste.
Prepare
Combine all ingredients in a small bowl.
Marinade vegetables with sauce. Cover and refrigerate for 2 hrs. Grill vegetables over medium heat until tender, brushing them with marinade while they cook. Cooking times will vary according to the vegetables chosen.
Troubleshooting
Problem Possible Cause
Burner will not light using knobs or ignitor
Wires/or electrode covered with cooking residue.
Electrode and burners are wet.
Prevention/Cure
Clean wire and /or electrode with rubbing alcohol.
Wipe dry with cloth.
Burner will not light using a match
Electrode cracked or broken – sparks at crack.
Wire loose or disconnected
No gas flow
Coupling nut and regulator not fully connected.
Replace electrode
Reconnect wire or replace electrode/wire assembly.
Check if propane tank is empty. If empty, replace or refill. If propane tank is not empty, refer to
Excessive flow safety valve reset procedure
on page 18.
Turn the coupling nut about one-half to three quarters additional turn until solid stop. Tighten by hand ONLY - do not use tools
Obstruction of gas flow Clear burner tubes.
Check for bent or kinked hose.
Disengagement of burner to valve Reengage burner and valve
Spider webs or insect nest in venturi.
Burner ports clogged or blocked.
Clean venturi.
Clean burner ports.
Sudden drop in gas flow or reduced flame height.
Tank out of gas. Check for gas in propane tank.
Irregular flame pattern, flame does not run the full length of burner
Flame is yellow or orange
Excess flow safety device may have been activated
Burner ports are clogged or blocked
New burner may have residual manufacturing oils.
Spider webs or insect nest in venturi
Food residue, grease or seasoning salt on burner.
Poor alignment of valve to burner venturi.
Refer to the
Excessive flow safety valve reset procedure
on page 18.
Clean burner ports.
Burn grill for 15 minutes with the lid closed
Clean venturi.
Clean burner.
Assure burner venturi is properly engaged with valve
GPF2414NS
Owner’s Manual
20
Flame blow out High or gusting winds
Low on propane gas.
Excess flow valve tripped
Turn front of grill to face wind or increase flame height
Replace or refill propane tank.
Refer to the
Excessive flow safety valve reset procedure
on page 18
Clean grill. Flare-up Grease buildup.
GPF2414NS
Owner’s Manual
Excessive fat in meat
Excessive cooking temperature
Trim fat from meat before grilling.
Persistent grease fire. Grease trapped by food buildup around burner system
Adjust (lower) temperature accordingly.
Turn knobs to OFF. Turn gas OFF at propane tank. Leave lid in closed position and let fire burn out. After grill cools, remove and clean all parts.
Clean burner and/or burner tube(s)] Flashback [fire in burner tubes] Burner and /or burner tubes are locked.
Inside of lid is peeling – like pant peeling
Irregular flame
The lid is stainless steel, not painted
Air flow is not correct. Correct flame: blue with yellow tips, 1-2” high. Too little air: wavy yellow or orange flames. Too much air: noisy blue flames.
Baked on grease buildup has turned to carbon and is flaking off. Clean thoroughly
If flames are yellow or orange – open flap at the end of the venturi tubes in
1/8” increments until flames are correct.
If flames are blue and noisy – close flap at the end of the venturi tubes in
1/8” increments until flames are correct.
*Propane Models must be open a minimum of 1/8”
*Natural Gas Models must be open a minimum of 1/16”
21
Warranty Program
Proof of purchase is required to access this warranty program, which is in effect from the date of purchase. Inability to provide proof of purchase or after the warranty has expired, customers will be subject to parts, shipping and handling fees.
Product Registration is required to receive full warranty coverage, which is in effect from the date of purchase. Inability to register products within ten days from the date of purchase may result in charges including parts, shipping and handling fees.
Customers can register their products online at www.pyromagicbbq.com or by returning the mail-in registration card.
Limited Warranty
10 Year Warranty
on stainless steel burners.
1 Year Warranty
on all parts in regards to damage affecting the operation of the gas grill.
Warranty Provisions:
This warranty is non-transferable and does not cover failures due to misuse or improper installation or maintenance. This warranty is for replacement of defective parts only. We are not responsible for incidental or consequential damages or labor costs.
This warranty does not cover chips and scratches of porcelain or painted surfaces, nor does it cover corrosion or discoloration due to misuse, lack of maintenance, hostile environment, accidents, alterations, abuse or neglect.
This warranty does not cover damage caused by heat, abrasive and chemical cleaners, resulting in chipped porcelain enamel parts or any damage to other components used in the installation or operation of the gas grill.
Some states do not allow the limitation or exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that
vary from state to state.
If you have any questions related to the product or warranty, please call our customer service center at
1-877-885-8227, 6:00 AM to 5:00 PM (PST), Monday through Friday.
Manufactured by:
Lucas Innovation Inc.
Xiekeng District, QingXi Town, Dong
Guan, Guang Dong, China
GPF2414NS
Owner’s Manual
22
Printed in China

Public link updated
The public link to your chat has been updated.
Advertisement