Seagate | MOMENTUS 5400.3 SATA | Momentus® 5400.3 SATA Removable Drive Cartridge

Product Manual
Momentus 5400.3 SATA
Removable Drive Cartridge
®
160 GB
100459868
Rev. D
August 2007
©2004-2007, Seagate Technology LLC All rights reserved.
Publication number: 100459868, Rev. D
August 2007
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate
Technology LLC in the United States and/or other countries. Momentus, SeagateSeaBOARD, SeaFONE, SeaTDD, and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/
or other countries. All other trademarks or registered trademarks are the property of their
respective owners.
One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion
bytes when referring to hard drive capacity. Accessible capacity may vary depending on
operating environment and formatting. Quantitative usage examples for various applications
are for illustrative purposes. Actual quantities will vary based on various factors, including file
size, file format, features and application software. Seagate reserves the right to change,
without notice, product offerings or specifications.
Contents
1.0
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1
About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.0
Removable Drive Cartridge specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Specification summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2
Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.1
LBA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.3
Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4
Physical organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.5
Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.6
Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.7
Seek time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.8
Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.9
Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.9.1
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.9.2
Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.9.3
Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.9.4
Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.10
Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10.1
Ambient temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10.2
Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10.3
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.10.4
Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.11
Shock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.11.1
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.12
Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.13
Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.14
Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.15
Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.16
Environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.16.1
European Union Restriction of Hazardous Substances (RoHS) . . . . . . . . . . . . 13
2.16.2
China Restriction of Hazardous Substances (RoHS) Directive . . . . . . . . . . . . . 14
2.17
Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.0
Using the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3
Normal operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4
Insertion capability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5
Write protect switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
16
16
17
17
4.0
Serial ATA (SATA) interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
Hot-Plug compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Serial ATA device plug connector pin definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1
Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2
Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.3
S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
19
19
21
24
27
28
5.0
Seagate Technology support services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
i
ii
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
List of Figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Momentus 5400.3 SATA Removable Drive Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Momentus 5400.3 SATA Removable Drive Cartridge dimensions . . . . . . . . . . . . . . . . . . . . . 16
Write protect switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
iii
1.0
Introduction
This manual describes the functional, mechanical and interface specifications for the 160GB Seagate
Momentus® 5400.3 SATA Removable Drive Cartridge (RDC).
These drives provide the following key features:
• Reliable--nonrecoverable read error rate of 1 in 1014 bits read.
• Rugged--can survive up to 1 M drop for all axes and each corner.
• Removable drive cartridges for convenience and portability.
• 5,400 RPM spindle speed.
• 8 Mbyte buffer.
• High instantaneous (burst) data-transfer rates (up to 150 Mbytes per second).
• Tunneling Magnetoresistive (TMR) recording heads.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Full-track multiple-sector transfer capability without local processor intervention.
• Quiet operation.
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the
industry’s most comprehensive protection for disc drives.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Support for Read Multiple and Write Multiple commands.
Figure 1. Momentus 5400.3 SATA Removable Drive Cartridge
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
1
1.1
About the Serial ATA interface
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary
advantages include:
• Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other configuration options.
• Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
• Scalability to higher performance levels.
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial
ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disc drive in your current
system and expect all of your existing applications to work as normal.
The Serial ATA interface connects each disc drive in a point-to-point configuration with the Serial ATA host
adapter. There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two
drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they
were both “masters” on two separate ports. This essentially means both drives behave as if they are Device 0
(master) devices.
Note.
The host adapter may, optionally, emulate a master/slave environment to host software where two
devices on separate Serial ATA ports are represented to host software as a Device 0 (master) and
Device 1 (slave) accessed at the same set of host bus addresses. A host adapter that emulates a
master/slave environment manages two sets of shadow registers. This is not a typical Serial ATA
environment.
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide
backward compatibility with existing host systems and software. The Command and Control Block registers,
PIO and DMA data transfers, resets, and interrupts are all emulated.
The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as the Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized
AT Attachment” specification. The specification can be downloaded from http://www.serialata.org.
2
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.0
Removable Drive Cartridge specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal
power. For convenience, the words and phrases RDC, removable drive cartridge, drive, and this drive are used
throughout this manual to indicate the 160GB Momentus 5400.3 SATA Removable Drive Cartridge (RDC).
2.1
Specification summary
The specifications listed below are for quick reference. For details on specification measurement or definition,
see the appropriate section of this manual.
Drive specification
160GB RDC (using ST9160821AS drive)
Formatted Gbytes (512 bytes/sector)
160
Guaranteed sectors
312,581,808
Bytes per sector
512
Default sectors per track
63
Default read/write heads
16
Default cylinders
16,383
Physical read/write heads
4
Discs
2
Recording density in BPI (bits/inch max)
870k
Track density TPI (tracks/inch max)
150k
Areal density
(Gbits/inch2 max)
Spindle speed (RPM)
132
5,400
Internal transfer rate (Mbits/sec max)
352
I/O data transfer rate (Mbytes/sec max)
150
ATA data-transfer modes supported
SATA 1.0, Serial ATA Revision 2.5 Specification; PIO modes
0–4; Multiword DMA modes 0–2; UDMA modes 0–6
Cache buffer
8 Mbytes
Height (max)
24.50 +/- 0.2 mm (0.965 +/- .0078 inches)
Width (max)
85.7 +/- 0.3 mm (3.374 +/- 0.0118 inches)
Length (max)
111.88 +/- 0.3 mm (4.40 +/- 0.0118 inches)
Weight (typical)
170 grams +/- 3 grams (0.3747 lbs +/- 0.0066 lbs)
Average latency (msec)
5.6
Power-on to ready (typical)
3.0 sec
Standby to ready (typical)
3.0 sec
Startup current, (typical, peak)
+5V: 1.0A
Track-to-track seek time (msec typical)
1.0 (read), 1.5 (write)
Average seek, read (msec typical)
12.5
Average seek, write (msec typical)
14.5
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
3
Drive specification
160GB RDC (using ST9160821AS drive)
Seek power (typical)
2.0 watts
Read/write power (typical)
Read: 1.90 watts; Write: 1.8 watts
Idle mode, low power (typical)
0.6 watts
Standby mode (typical)
0.2 watts**
Sleep mode (typical)
0.2 watts**
Voltage tolerance (including noise)
+5.0V ± 5%
Ambient temperature
5° to 55°C (operating), –40° to 70°C (nonoperating)
Temperature gradient
(°C per hour max)
20°C (operating)
30°C (nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature
(°C max)
30 (operating)
40 (nonoperating)
Altitude, operating
–304.8 m to 3,048 m
(–1000 ft to 10,000+ ft)
Altitude, nonoperating (meters below mean sea level, max)
–304.8 m to 12,192 m
(–1000 ft to 40,000+ ft)
Shock, operating (Gs max at 2 msec)
250
Shock, nonoperating (Gs max at 2 msec)
1,500
Vibration, operating
0.5 G (0 to peak, 5–500 Hz)
Vibration, nonoperating
2.22 Grms (5-500 Hz random), 30 min, each axis
Frequency (Hz); 5-300; Slope (dB/Oct.);
Power Spectral Density (PSD) (G2/Hz) +/- 6dB: 0.01
Drive acoustics, sound power (bels)
Idle*
<3.0 bels (typ)
<3.25 bels (max)
Seek
<3.4 bels (typ)
<3.6 bels (max)
1 per 1014 bits read
Nonrecoverable read errors
Annualized Failure Rate (AFR)
0.60%
Warranty
1 year.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You
will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system
will display the warranty information for your drive.
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Supports Hotplug operation per Serial ATA Revision 2.5 specification
Yes (requires COMPRESET from host after a hotplug event)
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
**Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes
will not contribute to battery power consumption.
4
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.2
Formatted capacity
Formatted capacity
Guaranteed sectors
Bytes per sector
160 Gbytes
312,581,808
512
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48bit addressing support of drives with capacities over 137 Gbytes.
2.3
Default logical geometry
Cylinders
Read/write heads
Sectors per track
16,383
16
63
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,
where n is the number of guaranteed sectors as defined above.
2.4
Physical organization
Drive model
Read/write heads
Number of discs
160GB with ST9160821AS
4
2
2.5
Recording and interface technology
Interface
Serial ATA (SATA)
Recording method
Perpendicular
Recording density BPI (bits/inch max)
870k
Track density TPI (tracks/inch max)
150k
Areal density
(Gbits/inch2
max)
132
Spindle speed (RPM) (± 0.2%)
5,400
Maximum Internal transfer rate (Mbits/sec)
352
I/O data-transfer rate (Mbytes/sec max)
150
Interleave
1:1
Cache buffer
8 Mbytes (8,192 kbytes)
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
5
2.6
Physical characteristics
Height
(mm)
(inches)
24.50 +/-0.2
0.965 +/-0.0078
Width
(mm)
(inches)
85.70 +/-0.3
3.374 +/-0.0118
Length
(mm)
(inches)
111.88 +/-0.3
4.40 +/-0.0118
Typical weight
(grams)
(pounds)
170 +/- 3 g
0.3747 +/- 0.0066
2.7
Seek time
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using
drive diagnostics. The specifications in the table below are defined as follows:
• Track-to-track seek time is an average of all possible single-track seeks in both directions.
• Average seek time is a true statistical random average of at least 5,000 measurements of seeks between
random tracks, less overhead.
Typical seek times (msec)
Read
Write
Track-to-track
1.0
1.5
Average
12.5
14.5
Full-stroke
22.0
24.0
Average latency
5.56
5.56
Note.
2.8
6
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted
values. However, due to the manner in which these drives are formatted, benchmark tests that
include command overhead or measure logical seeks may produce results that vary from these
specifications.
Start/stop times
Time to ready
Typical
Max @ 25°C
Power-on to Ready (sec)
3.0
8.0
Standby to Ready (sec)
3.0
8.0
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.9
Power specifications
The drive receives DC power (+5V) through a native SATA power connector.
2.9.1
Power consumption
Power requirements for the drives are listed in the table on page 7. Typical power measurements are based on
an average of drives tested, under nominal conditions, at 25°C ambient temperature, after 25 minutes of operation.
• Spinup power
Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
• Seek mode
During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does
not execute a read or write operation. Servo electronics are active. Seek mode power is measured based on
three random seek operations every 100 msecs. This mode is not typical.
• Read/write power and current
Read/write power is measured with the heads on track, based on three 63 sector read or write operations
every 100 msecs.
• Idle mode power
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in
a random track location.
• Standby mode
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/
write electronics are in power-down model
Power dissipation
+5V input average (25° C)
Spinup
1.0 A
Seek
2.0 watts
Read
1.9 watts
Write
1.8 watts
Idle, performance mode*
1.4 watts
Idle, active*
0.75 watts
Idle, low power mode*
0.6 watts
Standby
0.2 watts
Sleep
0.2 watts
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
7
Figure 2. Typical +5V only startup and operation current profile
2.9.2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on
the +5 volt line.
Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave
injected noise at up to 10 MHz.
Note.
Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write
current.
2.9.3
Voltage tolerance
Voltage tolerance (including noise):
5V ± 5%
8
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.9.4
Power-management modes
The drive provides programmable power management to provide greater energy efficiency. In most systems,
you can control power management through the system setup program. The drive features the following
power-management modes:
Power modes
Heads
Spindle
Buffer
Active (operating)
Tracking
Rotating
Full power
Idle, performance
Tracking
Rotating
Self refresh—low power
Idle, active
Floating
Rotating
Self refresh—low power
Idle, low power
Parked
Rotating
Self refresh—low power
Standby
Parked
Stopped
Self refresh—low power
Sleep
Parked
Stopped
Self refresh—low power
• Active mode
The drive is in Active mode during the read/write and seek operations.
• Idle mode
The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc
access is necessary.
• Standby mode
The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the
standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a
specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby
mode, the drive buffer is in Self Refresh Low Power mode, the heads are parked and the spindle is at rest.
The drive accepts all commands and returns to Active mode any time disc access is necessary.
• Sleep mode
The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer
is in Self Refresh Low Power mode, the heads are parked and the spindle is at rest. The drive leaves Sleep
mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep
mode and enters Standby mode with all current translation parameters intact.
• Idle and Standby timers
Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and
begins counting down from its specified delay times to zero. If the standby timer reaches zero before any
drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the
drive accepts all commands and returns to Active mode when disc access is necessary.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
9
2.10
Environmental specifications
Note.
The removable drive cartridge should be stored for less than 60 days when exposed to continuous
maximum temperature and humidity conditions of 40°C (104°F) and 80% relative humidity. Exceeding this duration in these conditions may result in loss of data.
2.10.1
Ambient temperature
Ambient temperature is defined as the temperature of the environment immediately surrounding the drive.
Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.
Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.
Operating
Nonoperating
5° to 55°C (41° to 131°F)
–40° to 70°C (–40° to 158°F)
System storage
0° to 30°C (0° to 86°F)
Drive cartridge storage
0° to 30°C (0° to 86°F)
2.10.2
2.10.3
Temperature gradient
Operating
20°C per hour (68°F per hour max), without condensation
Nonoperating
30°C per hour (86°F per hour max), without condensation
Humidity
Refer to the following two sections for relative humitidy and wet bulb temperature specifications.
2.10.3.1
Relative humidity
Operating
5% to 90% noncondensing (30% per hour max)
Nonoperating
5% to 95% noncondensing (30% per hour max)
Drive cartridge storage
2.10.3.2
Wet bulb temperature
Operating
Nonoperating
Drive cartridge storage
2.10.4
30°C (86°F) max
40°C (104°F) max
25°C (77°F) max
Altitude
Operating
Nonoperating
10
20% to 40% noncondensing (30% per hour max)
–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)
–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.11
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive
mounting screws. Shock may be applied in the X, Y or Z axis.
2.11.0.1
Operating shock
These drives comply with the performance levels specified in this document when subjected to a maximum
operating shock of 250 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
2.11.0.2
Nonoperating shock
The nonoperating shock level that the RDC can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 1,500 Gs based on a nonrepetitive half-sine shock
pulse of 0.5 msec duration. This value should be considered equivalent to a 1 M drop to any surface or corner
of the RDC onto a tiled surface over concrete.
2.11.1
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the rigidly-held RDC. Vibration may be applied in the X, Y or Z axis.
2.11.1.1
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.
5–500 Hz
2.11.1.2
0.5 G (0 to peak). Max displacement may apply below 10 Hz.
Nonoperating vibration
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.
Nonoperating random vibration input levels (no hard errors, all axes)
• 2.22 Grms (5-500 Hz random), 30 min. each axis
• Frequency (Hz): 5-500; Slope (dB/Oct.): Power Spectral Density (PSD) (G2/Hz) +/- 6dB: 0.01
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
11
2.12
Acoustics
Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.
For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the
following equation:
(Number of seeks per second = 0.4 / (average latency + average access time))
Idle*
Seek
<3.0 bels (typ)
<3.25 bels (max)
<3.4 bels (typ)
<3.6 bels (max)
Note.
2.13
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase
acoustic and power to operational levels.
Electromagnetic immunity
When properly installed in a representative host system, the drive operates without errors or degradation in
performance when subjected to the radio frequency (RF) environments defined below:
Test
Description
Performance level
Reference standard
Electrostatic discharge
Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV
B
EN 61000-4-2: 95
Radiated RF immunity
80 to 1,000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @
200 Hz
A
EN 61000-4-3: 96
ENV 50204: 95
Electrical fast transient
± 1 kV on AC mains, ± 0.5 kV on
external I/O
B
EN 61000-4-4: 95
Surge immunity
± 1 kV differential, ± 2 kV common, AC
mains
B
EN 61000-4-5: 95
Conducted RF immunity
150 kHz to 80 MHz, 3 Vrms, 80% AM with
1 kHz sine
A
EN 61000-4-6: 97
Voltage dips, interrupts
0% open, 5 seconds
0% short, 5 seconds
40%, 0.10 seconds
70%, 0.01 seconds
C
C
C
B
EN 61000-4-11: 94
12
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
2.14
Reliability
Measurement type
Specification
Nonrecoverable read errors
1 per 1014 bits read, max.
Annualized Failure Rate (AFR)
0.60%
At 2000 Power-On Hours (POH), nominal power, 25°C ambient temperature.
Max HDA case temperature: 65°C.
Load/Unload (U/UL)
25°C, 50% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Insertion and removal cycles
The Removable Drive Cartridge is designed to achieve 5000 insertion and
removal cycles when mated with a properly-designed receptacle. A cycle is
defined as a complete insertion and removal loop.
Warranty
1 year.
To determine the warranty for a specific drive, use a web browser to access the
following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.
2.15
Safety certification
The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections
of IEC950 and EN 60950 as tested by U.L.
The drive cartridge material meets flammability resistance requirements as specified by UL94V.
2.16
Environmental protection
Seagate designs its products to meet environmental protection requirements worldwide, including regulations
restricting certain chemical substances.
2.16.1
European Union Restriction of Hazardous Substances (RoHS)
The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical
substances, including Lead (Pb), in electronic products effective July 2006.
A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our
supplier contracts require compliance with our chemical substance restrictions, and our suppliers document
their compliance with our requirements by providing material content declarations for all parts and materials for
the disc drives documented in this publication. Current supplier declarations include disclosure of the inclusion
of any RoHS-regulated substance in such parts or materials.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
13
Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws
and regulations which restrict chemical content in electronic products. These systems include standard operating procedures that ensure that restricted substances are not utilized in our manufacturing operations, laboratory analytical validation testing, and an internal auditing process to ensure that all standard operating
procedures are complied with.
2.16.2
2.16.2
China Restriction of Hazardous Substances (RoHS) Directive
中国限制危险物品的指令
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following
table contains information mandated by China's "Marking Requirements for Control of Pollution
Caused by Electronic Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower
than the threshold defined by the China RoHS MCV Standard.
“O"表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。
"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over
the threshold defined by the China RoHS MCV Standard.
“X "表示该部件(于同类物品程度上)所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。
2.17
Corrosive environment
Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to
light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM
B845. However, this accelerated testing cannot duplicate every potential application environment.
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide,
chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any
electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
14
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
3.0
Using the drive
This section contains handling precautions, dimensions, and instructions for using the drive.
3.1
Handling precautions
Observe the following standard handling precautions:
• Avoid unnecessary handling. When you do handle the drive, avoid bumps and vibration.
• Do not bump, move, or drop the drive while in operation--doing so may damage the drive.
• Do not open the drive enclosure--this will void the product warranty.
• Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids
the warranty. Some factory-installed labels contain information needed to service the drive.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
15
3.2
Dimensions
111.88
Dimensions shown in mm
Z
Y
Y
7.3
X
X
6.5
15.5
R5.5
24.5
20.2
4.3
44.7
9.4
85.7
Y
Z
11.3
X
X
20.9
10.3
Figure 3. Momentus 5400.3 SATA Removable Drive Cartridge dimensions
3.3
Normal operation
The removable cartridge drive is designed for insertion into a drive bay within a host enclosure that is specifically-designed to house Seagate Removable Drive Cartridge units. This host enclosure may be a surveillance
system, a traditional home PC, office PC, an enterprise server host system, or any other host that supports
Momentus 5400.3 SATA Removable Drive Cartridge units.
A properly-designed drive bay allows you to insert the cartridge into the bay and blind mate to the receiving
connector with minimal force. Momentus 5400.3 SATA Removable Drive Cartridge units are hot-pluggable, so
you do not need to power down the host system prior to insertion. Power and interface signal connections are
provided through the SATA connector. The drive will begin spinning just milliseconds after full and proper insertion into the drive bay and will typically be ready for use within 10 seconds after insertion.
16
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
3.4
Insertion capability
Insertion cycles (cartridge into properly-designed carrier)
3.5
5,000
Write protect switch
The drive, as shipped from the factory, is configured to allow you to write to and read from the drive. To write
protect the Momentus 5400.3 SATA Removable Drive Cartridge, locate the write protect switch and move the
write protect switch to the position shown in Figure 4 below. Existing data on the drive may still be read, but
writes will be prohibited as long as the switch is in the write protect (locked) position.
The drive is shipped in the unlocked position and this is the default configuration. Verify that the write protect
switch is in the desired position prior to use.
Unlocked switch position (can read and write)
To write protect the drive, move the switch
to the locked position as shown above
Figure 4. Write protect switch
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
17
18
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
4.0
Serial ATA (SATA) interface
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA
programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive
also supports the use of the IORDY signal to provide reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT
Attachment” specification.
4.1
Hot-Plug compatibility
Momentus 5400.3 SATA drives incorporate connectors which enable you to hot plug these drives in accordance with the Serial ATA: High Speed Serialized AT Attachment specification revision 2.0. This specification
can be downloaded from http://www.serialata.org. This device requires a COMRESET from the host after a
hotplug event.
4.2
Serial ATA device plug connector pin definitions
Table 1 summarizes the signals on the Serial ATA interface and power connectors..
Table 1:
Segment
Signal
Serial ATA connector pin definitions
Pin
Function
Definition
S1
Ground
2nd mate
S2
A+
Differential signal pair A from Phy
S3
A-
S4
Ground
2nd mate
S5
B-
Differential signal pair B from Phy
S6
B+
S7
Ground
2nd mate
Key and spacing separate signal and power segments
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
19
Table 1:
Segment
Power
Serial ATA connector pin definitions
Pin
Function
Definition
P1
V33
3.3V power
P2
V33
3.3V power
P3
V33
3.3V power, pre-charge, 2nd mate
P4
Ground
1st mate
P5
Ground
2nd mate
P6
Ground
2nd mate
P7
V5
5V power, pre-charge, 2nd mate
P8
V5
5V power
P9
V5
5V power
P10
Ground
2nd mate
P11
Reserved
The pin corresponding to P11 in the backplane receptacle connector is also reserved
The corresponding pin to be mated with P11 in the power cable receptacle connector
shall always be grounded
P12
Ground
1st mate.
P13
V12
12V power, pre-charge, 2nd mate
P14
V12
12V power
P15
V12
12V power
Notes:
1. All pins are in a single row, with a 1.27 mm (0.050”) pitch.
2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this
case, the mating sequences are:
• the ground pins P4 and P12.
• the pre-charge power pins and the other ground pins.
• the signal pins and the rest of the power pins.
3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when
installed in a blind-mate backplane configuration.
4. All used voltage pins (Vx) must be terminated.
20
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
4.3
Supported ATA commands
Table 2 lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See “S.M.A.R.T. commands” on page 28.for details and subcommands used in the S.M.A.R.T. implementation.
Table 2:
Supported ATA commands
Command name
Command code (in hex)
ATA-standard commands
Device Configuration Restore
B1h/C0h
Device Configuration Freeze Lock
B1h/C1h
Device Configuration Identify
B1h/C2h
Device Configuration Set
B1h/C3h
Download Microcode
92h
Execute Device Diagnostics
90h
Flush Cache
E7h
Flush Cache Extended
EAh
Identify Device
ECh
Initialize Device Parameters
91h
Read Buffer
E4h
Read DMA
C8h
Read DMA Extended
25h
Read DMA without Retries
C9h
Read Long with Retries
22h
Read Long without Retries
23h
Read Multiple
C4h
Read Multiple Extended
29h
Read Native Max Address
F8h
Read Native Max Address Extended
27h
Read Sectors
20h
Read Sectors Extended
24h
Read Sectors without Retries
21h
Read Verify Sectors
40h
Read Verify Sectors Extended
42h
Read Verify Sectors without Retries
41h
Seek
70h
Set Features
EFh
Set Max Address
F9h
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
21
Table 2:
Supported ATA commands
Command name
Command code (in hex)
Note: Individual Set Max commands are identified by the value placed in the Set Max Features register as defined to the right.
Address:
Password:
Lock:
Unlock:
Freeze Lock:
Set Multiple Mode
C6h
S.M.A.R.T. Disable Operations
B0h/D9h
S.M.A.R.T. Enable/Disable Autosave
B0h/D2h
S.M.A.R.T. Enable Operations
B0h/D8h
S.M.A.R.T. Enable/Disable Auto Offline
B0h/DBh
S.M.A.R.T. Enable One Attribute Modification
B0h/E0h
S.M.A.R.T. Execute Offline
B0h/D4h
S.M.A.R.T. Read Attribute Thresholds
B0h/D1h
S.M.A.R.T. Read Data
B0h/D0h
S.M.A.R.T. Read Log Sector
B0h/D5h
S.M.A.R.T. Return Status
B0h/DAh
S.M.A.R.T. Save Attribute Values
B0h/D3h
S.M.A.R.T. Write Attribute Thresholds
B0h/D7h
S.M.A.R.T. Write Attribute Values
B0h/E1h
S.M.A.R.T. Write Log Sector
B0h/D6h
Write Buffer
E8h
Write DMA
CAh
Write DMA Extended
35h
Write DMA without Retries
CBh
Write Long with Retries
32h
Write Long without Retries
33h
Write Multiple
C5h
Write Sectors
30h, 31h
Write Sectors Extended
34h
00H
01H
02H
03H
04H
ATA-standard power-management commands
Check Power Mode
98h or E5h
Idle
97h or E3h
Idle Immediate
95h or E1h
Sleep
99h or E6h
Standby
96h or E2h
Standby Immediate
94h or E0h
22
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Table 2:
Supported ATA commands
Command name
Command code (in hex)
ATA-standard security commands
Security Set Password
F1h
Security Unlock
F2h
Security Erase Prepare
F3h
Security Erase Unit
F4h
Security Freeze Lock
F5h
Security Disable Password
F6h
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
23
4.3.1
Identify Device command
The Identify Device command (command code ECH) transfers information about the drive to the host following
power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table on
page 27. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or
vary with the state of the drive. See Section 2.0 on page 3 for default parameter settings.
The following commands contain drive-specific features that may not be included in the Serial ATA specification.
Word
Description
Value
0C5AH
0
Configuration information:
• Bit 15: 0 = ATA; 1 = ATAPI
• Bit 7: removable media
• Bit 6: removable controller
• Bit 0: reserved
1
Number of logical cylinders
16,383
2
ATA-reserved
0000H
3
Number of logical heads
16
4
Retired
0000H
5
Retired
0000H
6
Number of logical sectors per logical track: 63
003FH
7–9
Retired
0000H
10–19
Serial number: (20 ASCII characters, 0000H = none)
ASCII
20
Retired
0000H
21
Retired
0400H
22
Obsolete
0000H
23–26
Firmware revision (8 ASCII character string, padded with
blanks to end of string)
x.xx
27–46
Drive model number: (40 ASCII characters, padded with
blanks to end of string)
ST9160821AS
47
(Bits 7–0) Maximum sectors per interrupt on Read multiple
and Write multiple (16)
8010H
48
Reserved
0000H
49
Standard Standby timer, IORDY supported and may be disabled
2F00H
50
ATA-reserved
0000H
51
PIO data-transfer cycle timing mode
0200H
52
Retired
0200H
53
Words 54–58, 64–70 and 88 are valid
0007H
54
Number of current logical cylinders
xxxxH
55
Number of current logical heads
xxxxH
56
Number of current logical sectors per logical track
xxxxH
57–58
Current capacity in sectors
xxxxH
24
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Word
Description
Value
59
Number of sectors transferred during a Read Multiple or
Write Multiple command
xxxxH
60–61
Total number of user-addressable LBA sectors available
(see Section 2.2 for related information)
ST9160821AS = 312,581,808
62
Retired
0000H
63
Multiword DMA active and modes supported
(see note following this table)
xx07H
64
Advanced PIO modes supported (modes 3 and 4 supported)
0003H
65
Minimum multiword DMA transfer cycle time per word
(120 nsec)
0078H
66
Recommended multiword DMA transfer cycle time per word
(120 nsec)
0078H
67
Minimum PIO cycle time without IORDY flow control
(240 nsec)
00F0H
68
Minimum PIO cycle time with IORDY flow control (120 nsec)
0078H
69–74
ATA-reserved
0000H
75
Queue depth
0000H
76
Serial ATA capabilities
0508H
77
ATA-reserved
0000H
78
Serial ATA features supported
0048H
79
Serial ATA features enabled
0040H
80
Major version number
003EH
81
Minor version number
0000H
82
Command sets supported
306BH
83
Command sets supported
4001H
84
Command sets support extension
4000H
85
Command sets enabled
30xxH
86
Command sets enabled
0001H
87
Command sets enable extension
4000H
88
Ultra DMA support and current mode
(see note following this table)
xx7FH
89
Security erase time
0000H
90
Enhanced security erase time
0000H
92
Master password revision code
FFFEH
93
Hardware reset value
(see description following this table)
xxxxH
94
Auto acoustic management setting
xxxxH
95–99
ATA-reserved
0000H
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
25
Word
Description
Value
100–
103
Total number of user-addressable LBA sectors available
(see Section 2.2 for related information)
These words are required for drives that support the 48-bit
addressing feature. Maximum value: 0000FFFFFFFFFFFFh.
ST9160821AS = 312,581,808
104–
127
ATA-reserved
0000H
128
Security status
0001H
129–
159
Seagate-reserved
xxxxH
160–
254
ATA-reserved
0000H
255
Integrity word
xxA5H
Note.
See the bit descriptions below for words 63, 88, 93 and 94 of the Identify Drive data:
Description (if bit is set to 1)
26
Bit
Word 63
0
Multiword DMA mode 0 is supported.
1
Multiword DMA mode 1 is supported.
2
Multiword DMA mode 2 is supported.
8
Multiword DMA mode 0 is currently active.
9
Multiword DMA mode 1 is currently active.
10
Multiword DMA mode 2 is currently active.
Bit
Word 88
0
Ultra DMA mode 0 is supported.
1
Ultra DMA mode 1 is supported.
2
Ultra DMA mode 2 is supported.
3
Ultra DMA mode 3 is supported.
4
Ultra DMA mode 4 is supported.
8
Ultra DMA mode 0 is currently active.
9
Ultra DMA mode 1 is currently active.
10
Ultra DMA mode 2 is currently active.
11
Ultra DMA mode 3 is currently active.
12
Ultra DMA mode 4 is currently active.
13
Ultra DMA mode 5 is currently active.
Bit
Word 93
13
1 = 80-conductor cable detected, CBLID above VIH
0 = 40-conductor cable detected, CBLID below VIL
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
4.3.2
Set Features command
This command controls the implementation of various features that the drive supports. When the drive receives
this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register does not represent a feature that the drive supports, the command is aborted.
Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the
Features register are defined as follows:
Table 3:
Set Features command values
02H
Enable write cache (default).
03H
Set transfer mode (based on value in Sector Count register).
Sector Count register values:
00H Set PIO mode to default (PIO mode 2).
01H Set PIO mode to default and disable IORDY (PIO mode 2).
08H PIO mode 0
09H PIO mode 1
0AH PIO mode 2
0BH PIO mode 3
0CH PIO mode 4 (default)
20H Multiword DMA mode 0
21H Multiword DMA mode 1
22H Multiword DMA mode 2
40H Ultra DMA mode 0
41H Ultra DMA mode 1
42H Ultra DMA mode 2
43H Ultra DMA mode 3
44H Ultra DMA mode 4
45H Ultra DMA mode 5
55H
Disable read look-ahead (read cache) feature.
82H
Disable write cache
AAH
Enable read look-ahead (read cache) feature (default).
F1H
Report full capacity available
Note.
At power-on, or after a hardware or software reset, the default values of the features are as indicated above.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
27
4.3.3
S.M.A.R.T. commands
S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines
that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable.
S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T.
commands and implementation, see the Draft ATA-5 Standard.
SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that eliminates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at:
http://seatools.seagate.com.
This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that
supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the
drive uses.
Table 4:
S.M.A.R.T. commands
Code in features register
S.M.A.R.T. command
D0H
S.M.A.R.T. Read Data
D1H
Vendor-specific
D2H
S.M.A.R.T. Enable/Disable Attribute Autosave
D3H
S.M.A.R.T. Save Attribute Values
D4H
S.M.A.R.T. Execute Off-line Immediate (runs DST)
D5H
S.M.A.R.T. Read Log Sector
D6H
S.M.A.R.T. Write Log Sector
D7H
Vendor-specific
D8H
S.M.A.R.T. Enable Operations
D9H
S.M.A.R.T. Disable Operations
DAH
S.M.A.R.T. Return Status
Note.
28
If an appropriate code is not written to the Features Register, the command is aborted and 0x 04
(abort) is written to the Error register.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
5.0
Seagate Technology support services
Online Services
Internet
For information regarding Seagate products and services, visit www.seagate.com. Worldwide support is
available 24 hours daily by email for your questions.
Presales Support:
Presales@Seagate.com
Technical Support:
DiscSupport@Seagate.com
Warranty Support:
http://www.seagate.com/support/service/index.html
mySeagate
my.seagate.com is the industry's first Web portal designed specifically for OEMs and distributors. It provides
self-service access to critical applications, personalized content and the tools that allow our partners to
manage their Seagate account functions. Submit pricing requests, orders and returns through a single,
password-protected Web interface-anytime, anywhere in the world.
spp.seagate.com
spp.seagate.com supports Seagate resellers with product information, program benefits and sales tools. You
may register for customized communications that are not available on the web. These communications contain
product launch, EOL, pricing, promotions and other channel-related information. To learn more about the
benefits or to register, go to spp.seagate.com, any time, from anywhere in the world.
Seagate Service Centers
Presales Support
Our Presales Support staff can help you determine which Seagate products are best suited for your specific
application or computer system, as well as product availability and compatibility.
Technical Support
Seagate technical support is available to assist you online at support.seagate.com or through one of our call
centers. Have your system configuration information and your “ST” model number available.
SeaTDD™ (+1-405-324-3655) is a telecommunications device for the deaf (TDD). You can send questions or
comments 24 hours daily and exchange messages with a technical support specialist during normal business
hours for the call center in your region.
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
29
Customer Service Operations
Warranty Service
Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct
customers should contact their Seagate Customer Service Operations (CSO) representative for warrantyrelated issues. Resellers or end users of drive products should contact their place of purchase or Seagate
warranty service for assistance. Have your serial number and model or part number available.
Data Recovery Services
Seagate offers data recovery services for all formats and all brands of storage media. Our data recovery
services labs are currently located throughout the world. . Additional information, including an online request
form and data loss prevention resources, is available at http://services.seagate.com/index.aspx
Authorized Service Centers
Seagate Service Centers are available on a global basis for the return of defective products. Contact your
customer support representative for the location nearest you.
USA/Canada/Latin America support services
For an extensive list of telephone numbers to technical support, presales and warranty service in USA/
Canada/Latin America, including business hours, go to the "Contact Us" page on www.seagate.com.
Global Customer Support
Presales, Technical, and Warranty Support
Call Center
Toll-free
USA, Canada,
and Mexico
1-800-SEAGATE
Data Recovery Services
Call Center
USA, Canada,
and Mexico
Toll-free
1-800-475-01435
Direct dial
+1-405-324-4700
Direct dial
+1-905-474-2162
FAX
1-800-475-0158
+1-905-474-2459
Europe, the Middle East and Africa Support Services
For an extensive list of telephone numbers to technical support, presales and warranty service in Europe, the
Middle East and Africa, go to the "Contact Us" page on www.seagate.com.
Asia/Pacific Support Services
For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific,
go to the "Contact Us" page on www.seagate.com.
30
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Index
A
acoustics 4, 12
Active mode 9
Address 21
Agency certification 13
Altitude 10
Altitude, nonoperating 4
Altitude, operating 4
Ambient temperature 4, 10
ambient temperature 6
Annualized Failure Rate (AFR) 4
Areal density 3, 5
ATA commands 21
ATA data-transfer modes supported 3
Average seek time 6
Average seek, read 3
Average seek, write 3
Diagnostics 21
Dimensions 16
Discs 3
dissipation 7
Download Microcode 21
E
ead/write heads 3
Electrical fast transient 12
Electromagnetic immunity 12
Electrostatic discharge 12
EN 60950 13
Environmental protection 13
Environmental specifications 10
error-correction algorithms 1
errors 4, 13
European Union Restriction of Hazardous Substances 13
evice Configuration Identify 21
Execute Device Diagnostics 21
B
F
bels 4
BPI 3
buffer 3, 5
Bytes per sector 3, 5
features 1
Flush Cache 21
Flush Cache Extended 21
Formatted capacity 5
Formatted Gbytes 3
Freeze Lock 21
C
Cache 3
cache 5
capacity 5
case temperature 10
certification 13
Check Power Mode 22
chemical substances 13
China RoHS directive 14
Conducted noise 8
Conducted RF immunity 12
CSA C22.2 (950) 13
current 3
cycles 13
Cylinders 5
cylinders 3
D
data-transfer rates 1
DC power 7
Default logical geometry 5
Default sectors per track 3
density 3
Device Configuration Freeze Lock 21
Device Configuration Restore 21
Device Configuration Set 21
G
Gbytes 5
geometry 5
gradient 4
Guaranteed sectors 3, 5
guaranteed sectors 5
H
Handling precautions 15
heads 1, 3, 5
Height 3
height 6
Humidity 10
humidity 4
I
I/O data-transfer rate 3, 5
Identify 21
Identify Device 21
Identify Device command 24
Idle 7, 22
Idle and Standby timers 9
Idle Immediate 22
Idle mode 4, 9
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
31
Idle mode power 7
IEC950 13
Initialize Device Parameters 21
Input noise ripple 8
Insertion 17
Insertion cycles 17
Interface 5
interface 19
Interleave 5
Internal data transfer rate 3
Internal data-transfer rate 5
is 6
ISO document 7779 12
Power-on to Ready 6
Power-on to ready 3
precautions 15
programmable power management 9
Q
quick reference 3
R
Operating shock 11
Operating vibration 11
Radiated RF immunity 12
radio frequency (RF) 12
random track location 7
Read Buffer 21
Read DMA 21
Read DMA Extended 21
Read DMA without Retries 21
read errors 4, 13
Read Long with Retries 21
Read Long without Retries 21
Read Multiple 21
Read Multiple Extended 21
Read Native Max Address 21
Read Native Max Address Extended 21
Read Sectors 21
Read Sectors Extended 21
Read Sectors without Retries 21
Read Verify Sectors 21
Read Verify Sectors Extended 21
Read Verify Sectors without Retries 21
Read/write heads 5
Read/write power 4
read/write power and current 7
Recording density 3, 5
Recording method 5
Recording technology 5
Relative humidity 4, 10
Reliability 13
resistance 8
Retries 21
RF 12
RoHS 13, 14
RPM 3
P
S
Physical characteristics 6
Physical organization 5
Physical read/write heads 3
point-to-point 2
Power consumption 7
power dissipation 7
power management 9
power on/off cycles 13
Power specifications 7
Power-management modes 9
S.M.A.R.T. 22
S.M.A.R.T. implementation 21
SATA 5, 19
screws 11
sector 5
sectors 5
Sectors per track 5
sectors per track 3
Security Disable Password 23
Security Erase Prepare 23
L
latency 3
LBA mode 5
Length 3
length 6
Load/Unload 13
logical geometry 5
M
master/slave 2
Max Address 21
maximum temperature 10
Mean time between failures (MTBF) 13
Microcode 21
mounting screws 11
N
noise 8
nominal power 6
Nonoperating shock 11
Nonoperating vibration 11
Nonrecoverable read errors 4
nonrecoverable read errors 13
O
32
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Security Erase Unit 23
Security Freeze Lock 23
Security Set Password 23
Security Unlock 23
Seek 21
seek mode 7
Seek power 4
Seek time 6
seek time 3
Seeking 7
Self refresh, low power 9
Serial ATA 5
Serial ATA (SATA) interface 19
serial ATA ports 2
servo electronics 7
Set Features 21
Set Max Address 21
Set Multiple Mode 22
Shock 11
Shock, nonoperating 4
Shock, operating 4
single-track seeks 6
Sleep 7, 22
Sleep mode 4, 9
sound power 4
Specification summary table 3
Spindle speed 3, 5
Spinup 7
spinup power 7
Standby 7, 22
Standby Immediate 22
Standby mode 4, 7, 9
Standby to Ready 6
Standby to ready 3
Start/stop times 6
Startup current 3
support services 29
Surge immunity 12
switch 17
V
Vibration 11
Vibration, nonoperating 4
Vibration, operating 4
Voltage dips, interrupts 12
Voltage tolerance 4, 8
W
Warranty 13
Weight 3
weight 6
Wet bulb temperature 4, 10
Width 3
width 6
Write Buffer 22
Write DMA 22
Write DMA Extended 22
Write Long with Retries 22
Write Long without Retries 22
Write Multiple 22
Write protect 17
Write Sectors 22
T
technical support services 29
temperature 4, 6, 10
Temperature gradient 4, 10
timers 9
TMR 1
TPI 3
Track density 3, 5
Track-to-track seek time 3, 6
Tunneling Magnetoresistive heads 1
U
U.L. 13
UL 1950 13
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
33
34
Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D
Seagate Technology LLC
920 Disc Drive, Scotts Valley, California 95066-4544, USA
Publication Number: 100459868, Rev. D, Printed in USA
Download PDF