Schneider Electric | Spectra IV SE Series | Spectra® IV SE Series Dome Systems - Multi-line

PRODUCT SPECIFICATION
camera solutions
Spectra® IV SE Series Dome Systems
PREMIER INTEGRATED DOME SYSTEM
Product Features
• 2 Autofocus, High Resolution Integrated Camera/Optics Packages;
Multiple Back Box Models
• Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion
Detection, Image Enhancement, and Electronic Image Stabilization
(SD435 Series)
• Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), and Motion
Detection (SD427 Series)
• Autotracking
SURFACE MOUNT MODEL
SD435-SMW-0
PENDANT MODEL
SD427-PG-0
• Window Blanking
• Camera Title Overlay, 20 User-Definable Characters
• Horizontal and Zone Blanking
• On-Screen Compass and Tilt Display
• Password Protection
• Low Lux Noise Reduction
• Sure Focus
• Integrated Passive Unshielded Twisted Pair (UTP) Circuit
• Internal Scheduling Clock
• Built-in Surge and Limited Lightning Protection
• Ability to Add IP Network Capability by Purchasing Optional
TXB-IP Module
Modularity
Lower Dome
Spectra® IV SE was designed with ease of installation and ease of
maintenance in mind. Each dome system consists of three components: a
back box, a dome drive, and a lower dome. These three system components
are interchangeable with other Spectra IV SE dome systems, making
retrofitting and application adjustments simple. Also, dome drives and lower
domes can be removed and replaced reducing maintenance time.
Special consideration was taken when designing the Spectra IV SE lower
dome bubble to ensure that an optimal optical relationship between the lens
and bubble was achieved, providing crystal clear video at long focal lengths.
Back Box
Spectra IV SE back box options include the following models: environmental
in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount,
and standard and environmental pendant. The Spectra IV SE Series can also
be ordered with heavy-duty, pressurized, and stainless steel back box options
(refer to the appropriate product specification sheets for more information).
Each back box model features built-in back box memory to store camera
and location-specific dome settings, including labels, presets, patterns, and
zones. A passive UTP circuit is located on the door assembly for convenient
video transmission through twisted pair wire. For added flexibility, Pelco fiber
modules can also be attached to the door assembly for transmission over
single-mode or multimode fiber.
Dome Drive
The Spectra IV SE dome drive’s unique integrated optics package
incorporates many advanced features that allow the system to produce high
quality video in the most difficult environments. All cameras in Spectra IV SE
dome drives feature LowLight™ technology allowing the cameras to
compensate for scenes where minimal light is present. Both the 27X and the
35X cameras feature built-in motion detection and advanced 128X WDR that
enables the system to compensate for scenes where dramatic contrasts in
lighting are present. The 35X day/night camera electronic image
stabilization digitally reduces blurring of the camera image due to vibration
caused by external sources, such as wind and traffic.
Dome Systems
Spectra IV SE dome systems feature many software enhancements that
increase performance and make configuration and operation easy.
An internal scheduling clock allows for the scheduling of presets and
patterns. Window blanking enables a user to configure up to eight, foursided, user-defined privacy areas. Password protection prevents
unauthorized users from changing the system settings. Configurable
on-screen compass and tilt display provides positioning information
when needed. Intuitive multilingual on-screen menus can be displayed in
English, Spanish, Portuguese, Italian, French, German, Russian, Polish,
Turkish, and Czech.
Spectra IV SE’s variable speed capabilities range from a smooth, fast pan
motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree
per second. The system is capable of continuous 360 degrees rotation and has
an “auto flip” feature that allows the dome to rotate 180 degrees and
reposition itself for uninterrupted viewing of any subject that passes directly
beneath the dome.
In addition, with the optional Pelco TXB-IP module, you can add IP network
capability at any time to a Spectra IV dome system without losing analog
viewing and control. By snapping the TXB-IP module into the back box, you
can stream network video to a Web browser, Endura®, Digital Sentry®, or
third-party software recording solution allowing integration into virtually any
IP-based system.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C2448 / REVISED 6-10-11
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Day/Night (35X)
Signal Format
NTSC (DD4CBW35)
PAL (DD4CBW35-X)
Day/Night (27X)
NTSC (DD427)
PAL (DD427-X)
Scanning System
2:1 Interlace
2:1 Interlace
Image Sensor
Effective Pixels
NTSC
PAL
1/4-inch EXview HAD™
1/4-inch EXview HAD
768 (H) X 494 (V)
752 (H) X 582 (V)
768 (H) X 494 (V)
752 (H) X 582 (V)
Horizontal Resolution
NTSC
PAL
>540 TV Lines
>540 TV Lines
>540 TV Lines
>540 TV Lines
Lens
f/1.4 (focal length, 3.4 ~ 119 mm)
f/1.4 (focal length, 3.4 ~ 91.8 mm)
Zoom
35X optical, 12X digital
27X optical, 12X digital
Zoom Speed (optical range)
3.2/4.6/6.6 seconds
3.2/4.6/6.6 seconds
Horizontal
Angle of view
Focus
55.8° at 3.4 mm wide zoom;
1.7° at 119 mm telephoto zoom
Automatic with manual override
55.8° at 3.4 mm wide zoom;
2.3° at 91.8 mm telephoto zoom
Automatic with manual override
0.55 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color)
0.00018 lux at 1/2 sec (B-W)
0.55 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color)
0.00018 lux at 1/2 sec (B-W)
0.45 lux at 1/50 sec (color)
0.015 lux at 1/1.5 sec (color)
0.00015 lux at 1/1.5 sec (B-W)
0.45 lux at 1/50 sec (color)
0.015 lux at 1/1.5 sec (color)
0.00015 lux at 1/1.5 sec (B-W)
Maximum Sensitivity at 35 IRE
NTSC/EIA
PAL/CCIR
Sync System
Internal/AC line lock, phase adjustable using remote control, Internal/AC line lock, phase adjustable using remote control,
V-Sync
V-Sync
White Balance
Automatic with manual override
Automatic with manual override
Shutter Speed
NTSC
PAL
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000
Iris Control
Automatic iris control with manual override
Automatic iris control with manual override
Gain Control
Automatic/OFF
Automatic/OFF
Video Output
1 Vp-p, 75 ohms
1 Vp-p, 75 ohms
Video Signal-to-Noise
>50 dB
>50 dB
Wide Dynamic Range
128X
128X
Electronic Image Stabilization
Integrated/Selectable
—
Image Enhancement
Integrated/Selectable
—
TECHNICAL SPECIFICATIONS
DOME DRIVE FEATURES
• 256 Presets
• ±0.1° Preset Accuracy
• Electronic Image Stabilization (35X model)
• Image Enhancement (35X model)
• Multilingual Menus (English, Spanish, Portuguese, Italian, French,
German, Russian, Polish, Turkish, and Czech)
• RJ-45 Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• Resume After Alarm: Allows the Dome to Return to a Previously
Configured State After Alarm Acknowledgement or to its Previous
Position Before Alarm
• Multiple Park and Power-Up Action
• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Variable Scan Speed: Scan Speed Can Be Configurable Between
1 to 40°/sec
• Rotating Discreet Liner with Sealed Fixed Bubble
• Pan Motion Allows 0.1 to 150°/sec Pan Speed
• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each or Set to Output Blank Video
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
• 7 Alarm Inputs
• 1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output
(can be alternately configured to operate upon alarm)
• Digital Position and Zoom Control and Feedback through Pelco D Protocol
• Configurable Locations of Labels and On-Screen Displays
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Action on Alarm: Alarms Can Be Individually Configured for 3 Priority
Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset When
Received
• Configurable Zoom Speeds
• Low Lux Noise Reduction (reduces noise in low light)
• Built-in Menu System for Setup of Configurable Functions
WINDOW BLANKING
WIDE DYNAMIC RANGE
Window blanking allows a
user to configure up to
eight, four-sided, user-defined
areas that cannot be viewed
by the operator of the dome
system. A blanked area will
move with pan and tilt
functions and automatically
adjust in size as the lens
zooms telephoto and wide.
The WDR setting balances the
brightest and darkest sections
of a scene to produce a picture
that provides more detail.
BEFORE
AFTER
BEFORE
AFTER
TECHNICAL SPECIFICATIONS
BACK BOX FEATURES
7.6 (19.3)
1.6
(4.0)
Surface Mount (Indoor)
• Built-in Memory Stores Camera/Dome Settings
• Available in Black or White Finish
8.7
(22.0)
• Quick Disconnect to Dome Drive
• Injection-Molded Plastic
• Integrated Passive UTP
5.9 (15.0)
7.5 (19.0)
In-Ceiling (Indoor)
• Built-in Memory Stores Camera/Dome Settings
• Single Back Box for Suspended or Hard Ceiling Applications
5.2
(13.2)
• Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
• Quick Disconnect to Dome Drive
3.5
(8.8)
• Aluminum Construction
• Suitable for Use in Environmental Air Handling Spaces
5.9 (15.0)
• Integrated Passive UTP
8.2 (20.8)
9.9 (25.2)
Environmental In-Ceiling
• Built-in Memory Stores Camera/Dome Settings
• Single Back Box for Hard Ceiling Applications
4.4
(11.0)
• Requires 4.4-Inch Space Above Ceiling and 4.3 Inches Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
4.3
(10.9)
• Quick Disconnect to Dome Drive
5.9 (15.0)
8.6 (21.8)
• Aluminum Construction
• Integrated Passive UTP
Standard and Environmental Pendant
• Standard and Environmental Models
• Built-in Memory Stores Camera/Dome Settings
• Standard Pendant Available in Black or Gray Finish; Environmental
Pendant Gray Finish Only
10.6
(26.9)
• Quick Disconnect to Dome Drive
• Aluminum Construction
(ENVIRONMENTAL DOME
WITH SUN SHROUD SHOWN)
5.9 (15.0)
• Environmental Model Includes Sun Shield, Fan, and Heater
8.6 (21.8)
• Integrated Passive UTP
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
Note: The Spectra IV SE Series can be ordered with heavy-duty, pressurized, and stainless steel back box options. Refer to the appropriate product specification sheets
for more information.
TECHNICAL SPECIFICATIONS
MECHANICAL (Dome Drive Only)
GENERAL
Pan Movement
Vertical Tilt
Manual Pan/Tilt Speeds
Pan
Construction
Back Box
Surface Mount
In-Ceiling
Pendant
Dome Drive
Bubble
Light Attenuation
Smoked
Clear
Chrome
Gold
Cable Entry (Back Box)
In-Ceiling and
Surface Mount
Pendant
Weight (approximate)
Back Box
Surface Mount
In-Ceiling
Environmental
In-Ceiling
Standard Pendant
Environmental Pendant
Dome Drive
Lower Dome
Surface Mount
In-Ceiling
Pendant and
Environmental
In-Ceiling
Environment
Surface Mount
In-Ceiling
Environmental In-Ceiling
Pendant, Standard
and Environmental
Operating Temperature
Surface Mount and
Indoor In-Ceiling
Standard Pendant
Maximum
Tilt
Preset Speeds
Pan
Tilt
360° continuous pan rotation
Unobstructed +2° to –92°
0.1° to 80°/sec manual operation,
150°/sec Turbo
0.1° to 40°/sec manual operation
400°/sec
200°/sec
For variable-speed operation, an appropriate
controller is required (with nonvariable speed
control, Spectra IV SE pan/tilt speed is
20°/sec)
ELECTRICAL
Input Voltage
Input Power
24 VAC
24 VDC
Fuse
Auxiliary Outputs
Alarm Inputs
18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
23 VA nominal (without heater);
73 VA nominal (with heater)
0.7 A nominal (without heater);
3 A nominal (with heater)
1.25 A
2
7
CERTIFICATIONS/RATINGS/PATENTS
•
•
•
•
•
•
CE, Class B
FCC, Class B
UL/cUL Listed
C-Tick
S Mark for Argentina
Meets NEMA Type 4X, IP66 when installed properly (BB4-F-E, BB4-PB,
BB4-PG, and BB4-PG-E)
• Meets NEMA Type 1, IP40 (BB4-SMW, BB4-SMB, and BB4-F)
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2;
7,161,615 B2
Minimum
Environmental In-Ceiling
and
Environmental Pendant
Maximum
Minimum
TS2
Plastic
Aluminum
Aluminum
Aluminum, thermo plastic
Acrylic
f/0.5 light loss
Zero light loss
f/2.0 light loss
f/2.0 light loss
0.75-inch conduit fitting
Through 1.5-inch NPT pendant mount
Unit
Shipping
0.7 lb (0.32 kg)
1.5 lb (0.68 kg)
2 lb (0.90 kg)
2 lb (0.90 kg)
2.1 lb
2.4 lb
3.5 lb
3.3 lb
3 lb
4 lb
5 lb
5 lb
(0.95 kg)
(1.09 kg)
(1.59 kg)
(1.48 kg)
(1.36 kg)
(1.81 kg)
(2.27 kg)
(2.27 kg)
0.4 lb (0.18 kg)
0.2 lb (0.09 kg)
1 lb (0.45 kg)
1 lb (0.45 kg)
0.6 lb (0.27 kg)
2 lb (0.90 kg)
Indoor
Indoor
Outdoor
Indoor/outdoor
32° to 122°F (0° to 50°C)
(Assumes no wind chill factor)
113°F (45°C) absolute maximum;
95°F (35°C) sustained maximum
25°F (–4°C) sustained minimum
(Assumes no wind chill factor)
140°F (60°C) absolute maximum;
122°F (50°C) sustained maximum
–60°F (–51°C) absolute minimum; prevents
icing at sustained minimum of –50°F (–45°C);
de-ices 0.1 inch (2.5 mm) within 3 hours after
power-up
–29.2° to 165°F (–34° to 74°C)
Per NEMA TS2, para. 2.1.5.1, using fig. 2.1 test profile
Effective Projected
Area (EPA)
20.5 square inches (without mount)
47 square inches (with IWM Series mount)
RELATED PRODUCTS
OPTIONAL ACCESSORIES
DD5-FM
Fixed camera mount adapter. Interchangeable
with all Spectra IV dome drives.
IPS-CABLE
Remote monitor cable and software kit
consisting of the Spectra IV remote monitor
interface cable and necessary software for
use with a PC. Refer to www.pelco.com for a
list of compatible devices.
IPS-RDPE-2*
Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/configuration and software upgrades
when used with the IPS-CABLE.
TXB Series*
Translator boards for AD™ Manchester,
Hernis, Bosch® (Philips, Burle), TASS, and
NTCIP protocols.
TXB-IP Series*
Communication module that allows you to
control and monitor Spectra IV dome systems
over an IP network (in-ceiling and pendant
models only).
FS85011A*
Fiber transmitter sends 1 unidirectional
composite video channel and 1 bidirectional
data channel over 1 multimode or singlemode fiber optical cable.
*If TXB or FS85011A boards are installed, remote upload of system software
will not be possible.
RELATED PRODUCTS
RECOMMENDED MOUNTS
RECOMMENDED POWER SUPPLIES
Surface Mount Domes
PASMB
MCS Series
WCS Series
SD53SM-P
In-Ceiling Domes
SD5-P
SCA1
Pendant Domes
BB5-PCA-BK*
BB5-PCA-GY*
IWM Series
MRCA
PP4348
PP350/PP351
SWM Series
Pendant adapter for surface mount dome,
black
2' x 2' drop ceiling panel for BB4-SMW and
BB4T-SMW series back boxes; replaces 2' x 2'
ceiling tile; aluminum construction
2' x 2' drop ceiling panel, aluminum
construction; replaces 2' x 2' ceiling tile
Support rails for BB4-F; for use in ceiling tile
applications
Pendant conduit adapter, black
Pendant conduit adapter, gray
Wall mount, with or without integral 24 VAC,
100 VA transformer; black or gray finish; can
be adapted for corner, parapet, or pole
applications
Ceiling mount, black
Parapet roof mount
Parapet wall/roof mount
Compact wall mount, black or gray finish; can
be adapted for corner or pole applications
*Not suitable for use with heavy-duty, pressurized, or stainless steel Spectra
domes.
Indoor, 24 VAC power supply
Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
SYSTEM AND COMPONENT MODELS
SYSTEM MODEL NUMBERS
Type
Surface Mount
Back Box Color
Lower Dome
White
Smoked
SD435-SMW-0
SD435-SMW-0-X
SD427-SMW-0
SD427-SMW-0-X
Clear
SD435-SMW-1
SD435-SMW-1-X
SD427-SMW-1
SD427-SMW-1-X
Chrome
SD435-SMW-2
SD435-SMW-2-X
SD427-SMW-2
SD427-SMW-2-X
Gold
SD435-SMW-3
SD435-SMW-3-X
SD427-SMW-3
SD427-SMW-3-X
Black
In-Ceiling, Indoor
Black
In-Ceiling, Environmental*
Pendant, Standard
Black
Black
Light Gray
Pendant, Environmental*
Light Gray
35X Day/Night (NTSC)
35X Day/Night (PAL)
27X Day/Night (NTSC)
27X Day/Night (PAL)
Smoked
SD435-SMB-0
SD435-SMB-0-X
SD427-SMB-0
SD427-SMB-0-X
Clear
SD435-SMB-1
SD435-SMB-1-X
SD427-SMB-1
SD427-SMB-1-X
Chrome
SD435-SMB-2
SD435-SMB-2-X
SD427-SMB-2
SD427-SMB-2-X
Gold
SD435-SMB-3
SD435-SMB-3-X
SD427-SMB-3
SD427-SMB-3-X
Smoked
SD435-F0
SD435-F0-X
SD427-F0
SD427-F0-X
Clear
SD435-F1
SD435-F1-X
SD427-F1
SD427-F1-X
Chrome
SD435-F2
SD435-F2-X
SD427-F2
SD427-F2-X
Gold
SD435-F3
SD435-F3-X
SD427-F3
SD427-F3-X
Smoked
SD435-F-E0
SD435-F-E0-X
SD427-F-E0
SD427-F-E0-X
Clear
SD435-F-E1
SD435-F-E1-X
SD427-F-E1
SD427-F-E1-X
Smoked
SD435-PB-0
SD435-PB-0-X
SD427-PB-0
SD427-PB-0-X
Clear
SD435-PB-1
SD435-PB-1-X
SD427-PB-1
SD427-PB-1-X
Chrome
SD435-PB-2
SD435-PB-2-X
SD427-PB-2
SD427-PB-2-X
Gold
SD435-PB-3
SD435-PB-3-X
SD427-PB-3
SD427-PB-3-X
Smoked
SD435-PG-0
SD435-PG-0-X
SD427-PG-0
SD427-PG-0-X
Clear
SD435-PG-1
SD435-PG-1-X
SD427-PG-1
SD427-PG-1-X
Chrome
SD435-PG-2
SD435-PG-2-X
SD427-PG-2
SD427-PG-2-X
Gold
SD435-PG-3
SD435-PG-3-X
SD427-PG-3
SD427-PG-3-X
Smoked
SD435-PG-E0
SD435-PG-E0-X
SD427-PG-E0
SD427-PG-E0-X
Clear
SD435-PG-E1
SD435-PG-E1-X
SD427-PG-E1
SD427-PG-E1-X
COMPONENT MODEL NUMBERS
Back Box
BB4-SMB
BB4-SMW
BB4-F
BB4-F-E
BB4-PB
BB4-PG
BB4-PG-E
Surface mount, black
Surface mount, white
In-ceiling, black
In-ceiling, black, environmental
Pendant mount, black, standard
Pendant mount, gray, standard
Pendant mount, gray,
environmental
Lower Dome†
Dome Drive
DD427
DD427-X
DD4CBW35
DD4CBW35-X
DD5-FM
Day/Night (NTSC) camera (27X)
Day/Night (PAL) camera (27X)
Day/Night (NTSC) camera (35X)
Day/Night (PAL) camera (35X)
Removable, fixed mount bracket only (camera and
lens not included); interchangeable with all
Spectra IV dome drives
LD53SMB-0
LD53SMB-1
LD53SMB-2
LD53SMB-3
LD53SMW-0
LD53SMW-1
LD53SMW-2
LD53SMW-3
LDHQF-0
Notes:
To order a fixed mount dome system, refer to the component models above and select one each of the following options: LDHQF-1
LD5F-2
back box (BB4-F), dome drive (DD5-FM), plus choice of lower dome (LDHQF-0, LDHQF-1, LD5F-2, or LD5F-3).
LD5F-3
For environmental applications, you must order an environmental back box (BB4-F-E or BB4-PG-E).
LDHQPB-0
LDHQPB-1
DD5-FM is ideal for use with Pelco’s C10DN-6, C10DN-6X, C10CH-6, C10CH-6X, CCC1390H-6, and CCC1390H-6X cameras
LD53PB-2§
with selected Pelco lenses.
LD53PB-3§
Smoked, surface, black
Clear, surface, black
Chrome, surface, black
Gold, surface, black
Smoked, surface, white
Clear, surface, white
Chrome, surface, white
Gold, surface, white
Smoked, in-ceiling
Clear, in-ceiling
Chrome, in-ceiling
Gold, in-ceiling
Smoked, pendant, black
Clear, pendant, black
Chrome, pendant, black
Gold, pendant, black
*Environmental dome systems include a heater and fan, and the environmental pendant also includes a sun shield.
†Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes.
§Not recommended for outdoor use due to possible light reflections.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2011, Pelco, Inc. All rights reserved.
PRODUCT SPECIFICATION
camera site
Spectra® Mini Dome System
INDOOR, MINIATURE, SURFACE MOUNT/IN-CEILING
Product Features
• Familiar Spectra® Camera Menu Structure
• Single Model for Surface Mount and In-Ceiling Applications
• Autofocus, High Resolution Integrated Color Camera/Optics Package
• 80X Zoom (10X Optical, 8X Digital)
• Zone Blanking
• 64 Presets
• 0.5° Preset Accuracy
• 140°/second Pan Speed
SURFACE MOUNT
APPLICATION
• Rotating Discreet Liner
• One Pattern
• One Dynamic Window Blanking Area
• Proportional Pan and Tilt
• Programmable Zoom Speeds
• Multilanguage Support
• Integral, Autosensing, Multiprotocol Receiver
• Auto Flip Dome Rotation
• Integrated UTP Circuit
• Quick Connect Cable for Power, Video (Coax or UTP), and Data
RECESSED CEILING
APPLICATION
• Available with Smoked or Clear Dome
The Spectra® Mini incorporates many well-known features from
Pelco’s full-size Spectra dome system into a cost effective, small
form factor. The easy-to-install dome system can be mounted to the
surface of ceilings or recessed into hard ceilings and suspended tile
ceilings. A high resolution camera transmits video over coaxial cable
or unshielded twisted pair (UTP) wires. When paired with active UTP
receivers, the Spectra Mini is capable of transmitting high quality
video across distances of up to 4,000 ft (1,219 m). Pan/tilt operation
can be performed with Pelco's controllers that transmit D, P, or
Coaxitron® protocols. For non-Pelco controllers, a translator board
can be installed. On-screen programming allows easy setup of the
miniature dome‘s many features.
Variable speed capabilities of the Spectra Mini range from a fast
pan motion of 140 degrees per second to a smooth “creep” speed of
C3401 / REVISED 1-07
0.4 degrees per second. The system is capable of continuous
360 degrees rotation and has an auto flip feature that allows the
dome to rotate 180 degrees and reposition itself for uninterrupted
viewing of any subject that passes directly beneath the dome’s
location.
Optional diagnostic/installation tools include a remote monitor kit
(IPS-RMK) and a remote monitor cable (IPS-CABLE), both of which
require an adapter cable (IPS-MINIADPT). The IPS-MINIADPT cable
is supplied with the IPS-RMK. These accessories allow the installer
to view video, control PTZ, and perform system setup and software
upgrades at the installation site. The IPS-RMK is a stand-alone kit
consisting of a 5.6-inch TFT-LCD monitor, Palm™ OS-compatible
handheld device and interface cable, carrying case, and the remote
monitor cable.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
GENERAL
Product Features
• 64 Presets: 53 User Definable and 11 Predefined
• ±0.5° Preset Accuracy
• Multilanguage Menus (English, Spanish, Portuguese, Italian, French, and
German)
• Alternate Language Files (includes Russian, Polish, Turkish, and
Czechoslovakian) Available as Optional Software Upload
• Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• Password Protection
• 140°/sec Pan Preset Speed and 80°/sec Tilt Preset Speed
• Rotating Discreet Liner
• Four Zones (programmable in size) Can Be Labeled with up to 20
Characters Each or Set to Output Blank Video
• Programmable Locations of Labels and On-Screen Displays
• One on-screen, user-defined programmable pattern. Includes pan, tilt,
zoom, and preset functions
• One Programmable Window Blanking Area
• Proportional Pan and Tilt – Continually decreases pan and tilt speeds in
proportion to depth of zoom
• Variable Scan Speed – Scan speed can be 3, 6, or 12°/sec
• Pan Motion Allows 0.4-140°/sec Pan Speed
• Programmable Limit Stops for Auto/Random/Frame Scan Modes
• Autosensing Protocol (Coaxitron, RS-422 P and D); Accepts Competitive
Control Protocols with Optional TXB Translator Boards
• Digital Position, Zoom Control, and Feedback Via D Protocol
• Built-in Menu System for Setup of Programmable Functions
• Auto Flip Rotates Dome 180° at Bottom of Tilt Travel
• Programmable Zoom Speeds
Construction
Top Cap
Dome Drive
Trim Ring and
Surface Mount Ring
Bubble
Finish
Light Attenuation
Smoked
Clear
Cable Entry
Environment
Operating Temperature
Unit Weight
Shipping Weight
ABS plastic
Acrylic
White or black
1/2 F-stop light loss
Zero light loss
RJ45-10 pigtail connector for video (UTP),
power, and data (supplied)
BNC connector for video (coax)
Indoor
32° to 122°F (0° to 50°C)
1.75 lb (0.79 kg)
4 lb (1.81 kg)
MECHANICAL
Pan Movement
Vertical Tilt
Manual Pan/Tilt Speeds
Pan
Tilt
Preset Speeds
Pan
Tilt
360° continuous pan rotation
Unobstructed +2° to -92°
0.4°-80°/sec manual operation,
100°/sec turbo
0.7°-40°/sec manual operation
140°/sec
80°/sec
For variable speed operation an appropriate
controller is required.
ELECTRICAL
Input Voltage
Input Power
Fuse
WITH TXB TRANSLATOR BOARD
Anodized cast aluminum
ABS plastic
18-30 VAC; 24 VAC nominal
21 VA nominal
1.6 A
WITHOUT TXB TRANSLATOR BOARD
5.05
(12.83)
5.05
(12.83)
Ø6.19
(15.72)
Ø6.19
(15.72)
5.13
(13.03)
5.27
(13.39)
Ø4.25
(10.80)
Ø4.25
(10.80)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
TECHNICAL SPECIFICATIONS
CAMERA
OPTIONAL MOUNTS
Signal Format
Scanning System
Image Sensor
Effective Pixels
NTSC
PAL
Horizontal Resolution
NTSC
PAL
Minimum Illumination
Sync System
NTSC/PAL
2:1 interlace
1/4-inch interline CCD
SPM4-W
SPM4-B
SWM4-W
SWM4-B
768 (H) x 494 (V)
752 (H) x 582 (V)
Pendant mount, white
Pendant mount, black
Pendant-wall mount, white
Pendant-wall mount, black
LENS
Lens
White Balance
Shutter Speed
Gain Control
Video Output
Composite
UTP
Video Signal-to-Noise Ratio
>470 TV lines
>460 TV lines
3.0 lux
AC line lock, phase adjustable via remote
control, V-Sync
Automatic with manual override
Automatic (electronic iris)/manual
1/60 ~1/30,000
Automatic with manual override
Zoom Speed (optical range)
Horizontal Angle of View
Focus
Iris Control
F1.8 (F= 4.2~42 mm optical) 10X optical zoom,
8X digital zoom
1.5/2.5/4.3 seconds
46.4° wide zoom;
5.0° telephoto zoom
Automatic with manual override
Automatic with manual override
CERTIFICATIONS
• CE, Class B
• FCC, Class B
• UL Listed
• UL Listed to Canadian safety standards
At the time of this printing, all other certifications are pending. Please consult
the factory, our website (www.pelco.com), or the most recent B.O.S.S.®
update for the current status of certifications.
1.0 to 1.2 Vp-p, 75 ohms, adjustable
1.0 to 1.2 Vp-p, 100 ohms, adjustable
>50 dB
SPECTRA MINI DOME SHOWN WITH
OPTIONAL SPM4-W PENDANT MOUNT
SPECTRA MINI DOME SHOWN WITH
OPTIONAL SWM4-W PENDANT-WALL MOUNT
3.70
(9.40)
5.20
(13.21)
3.95
(10.03)
Ø 6.10
(15.49)
Ø 6.10
(15.49)
7.05
(17.91)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
SPM4-W/SPM4-B
Mounting Method
Construction
Finish
SPM4-W
SPM4-B
Unit Weight
Shipping Weight
SWM4-W/SWM4-B
Attach mount to 0.75-inch NPT pipe or 20 mm
threaded conduit; attach Spectra Mini dome
with hardware supplied with mount
ABS plastic
White
Black
0.30 lb (0.14 kg)
2 lb (0.91 kg)
Mounting Method
Construction
Finish
SWM4-W
SWM4-B
Unit Weight
Shipping Weight
Install adapter plate on wall or junction box
using appropriate hardware; attach wall
mount to adapter plate; attach Spectra Mini
dome with hardware supplied with mount
ABS plastic, aluminum
White
Black
0.72 lb (0.33 kg)
2 lb (0.91 kg)
MODELS AND RELATED PRODUCTS
MODELS
SD4-B0
SD4-B1
SD4-B0-X
SD4-B1-X
SD4-W0
SD4-W1
SD4-W0-X
SD4-W1-X
OPTIONAL ACCESSORIES
Indoor dome system, black, smoked bubble, NTSC
Indoor dome system, black, clear bubble, NTSC
Indoor dome system, black, smoked bubble, PAL
Indoor dome system, black, clear bubble, PAL
Indoor dome system, white, smoked bubble, NTSC
Indoor dome system, white, clear bubble, NTSC
Indoor dome system, white, smoked bubble, PAL
Indoor dome system, white, clear bubble, PAL
IPS-RMK
IPS-CABLE
IPS-MINIADPT
TXB Series
Remote monitor kit. Stand-alone kit consisting of a 5.6-inch TFT-LCD monitor, Palm™ OS
compatible handheld, cables and carrying
case. Allows viewing of camera video, local
PTZ control, system setup, and system
software upgrades at any installed dome.
Includes IPS-MINIADPT adapter cable.
Remote monitor cable and software kit
consisting of the Spectra remote monitor
interface cable and necessary software for
use with a PC (Windows® 95, 98, Me, 2000),
Palm OS compatible handheld or iPaq™ Series
Pocket PC.
See www.pelco.com for a list of compatible
devices.
Adapter cable required to use IPS-RMK and
IPS-CABLE. Supplied with IPS-RMK.
Translator boards for AD Manchester, Hernis,
Bosch (Philips, Burle), Sensormatic, and Vicon
protocols.
IPS-RMK REMOTE MONITOR KIT
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150
International Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
Pelco, the Pelco logo, Coaxitron, Spectra, and B.O.S.S. are registered trademarks of Pelco.
Windows is a registered trademark of Microsoft Corporation.
iPaq is a trademark of Compaq Corporation.
Palm is a trademark of Palm, Inc.
Specifications subject to change without notice.
©Copyright 2007, Pelco. All rights reserved.
Download PDF