AMC | iA 480X | Specifications | AMC iA 480X Specifications

GE
Sensing & Inspection Technologies
DPI 620 Series
Advanced Modular Calibration and HART®
Communication System
Combines an advanced multi-function calibrator and HART communicator
with world-class pressure measurement and generation.
Now with ATEX /IEC approval.
Modularity brings a whole
new perspective to multi-function
test instruments, calibrators and
HART communicators
System features
• Graphical views of data log files, calibration results and historical
trends
• Modular concept provides greater flexibility
• PDA version with Windows CE – view loop diagrams, datasheets,
safety procedures, spreadsheets and create text documents.
• ATEX and IEC approved for hazardous areas
• Re-range during use
• Expand over time
• Adapt by application
• Allows significant inventory reductions
• Simplifies user training
• Reduces cost of ownership
• A Complete HART communicator and multifunction calibrator in
one device
The system includes:
A combined Multifunction calibrator…
• Accuracy from 0.0025%rdg + 0.002%FS
• Measure, source and simulate mA, mV, V, ohms, frequency, RTDs
and thermocouples
• Easy to use with photo quality touch screen
• Robust, weatherproof and extremely compact
…and a HART digital communicator…
• Device Description Library for HART devices
• Free of charge upgrades and new device descriptions
• Integral loop power supply to energise HART devices and loops
• Menu selectable 250 ohm loop resistor
• Measures mA and sources the primary variable for device trims
and calibration
…with advanced connectivity and
documenting features
• Automate calibration procedures and document As Found and As
Left results
• Store a complete plant database including tags, devices and
procedures
2
• IEEE 802.11g wireless connection with Internet access
Pressure measurement modules
• 25 mbar to 1000 bar (10 inH2O to 15000 psi)
• Accuracy from 0.005%FS
• Fully interchangeable modules with no need for set-up,
calibration or tools
Pressure generation stations
• Advanced pressure generation
- 95% vacuum to 20 bar pneumatic
- 95% vacuum to 100 bar pneumatic
- 0 to 1000 bar hydraulic
• Stand-alone pressure stations can replace hand pumps and can
be used as comparators
Applications
• Instrumentation installation, commissioning, maintenance and
calibration
• HART test, configuration and calibration
• System measurement and monitoring
• Indicator, recorder and controller testing
• Process loop set up and diagnostics
• Switch, trip and safety system testing
For …
• Plant and process engineers
• Service companies and site contractors
• Installation and commissioning engineers
• Laboratory technicians
A flexible modular system
The DPI 620 Series - Advanced Modular Calibration and HART Communication
System uses three basic components to provide the multi-functionality to
perform duties formerly requiring a wide range of different instruments.
Features
• Multi-function capabilities: electrical,
frequency, temperature and pressure
• ATEX/IEC approved
• Complete HART communicator included
• Modular re-rangeable and expandable
concept
• Individual components can be used as
stand-alone instruments
• Allows significant inventory reductions
• Simplifies training and improves
operator safety
• Reduces cost of ownership
Its basic component is an ultra-compact,
electrical, frequency and temperature
calibrator and HART communicator, which
provides simultaneous measurement and
source capabilities with a fully featured
HART digital interface.
Measure and source mA, mV, V, ohms, frequency, RTD’s
and thermocouples.
Re-rangeable dual channel pressure measurement
from 25 mbar (10 inH2O) to 1000 bar (15000 psi)
Pressure measurement is provided by
interchangeable pressure modules that
can be attached to the calibrator by a
pressure module carrier.
If pressure generation is required the
calibrator and pressure module can
be attached to one of three pressure
generation stations, to form a
fully-integrated pressure calibrator,
of unparalleled performance.
The simple yet sophisticated design and
concept combines, for the first time,
an advanced electrical calibrator with
state-of-the-art pressure measurement
and generation, so that there is no longer
any need to compromise one measurand
capability in favour of another.
Re-rangeable pressure measurement and generation from 25 mbar (10 inH2O) to 1000 bar (15000 psi)
3
The DPI 620 Series
Advanced Modular Calibrator and HART
Communicator
Features
• Measure, source and simulate multiple parameters
• Complete HART communicator included
• Easy-to-use, with photo quality colour touch screen, which can be
operated by a gloved hand
configured to show up to six reading windows and can show
electrical and temperature inputs and outputs, two pressure module
readings, an IDOS pressure measurement, and a USB-connected
device, as well as a HART summary window or full HART
communicator with active mA measurement and actual primary
variable readings.
The reading windows also act as active keys and, when pressed,
they expand to show more detailed information or to provide
advance functions such as step and ramp outputs. Colour is used
to emphasize important information, for example, red for critical or
failed values and green for pass or within tolerance.
• Weather-proof to IP 65
• Can display up to 6 active readings
• Available with a range of add-on modules, pressure
measurement modules and generation stations, Intecal Field
Calibration documenting module, 300Vac measurement probe
(not available in IS version)
• Digital interface for pressure modules and future options
• USB master and slave for connecting to a PC and peripherals (not
available in IS version)
• Available in Windows CE version
• Long-life battery pack
A Compact and Powerful Electrical Calibrator and
HART Communicator
The DPI 620 electrical calibrator can measure and source mA, mV, V,
Ohms, frequency and a variety of RTDs and T/Cs. It provides an
isolated 24 V loop power supply to energise devices and control
loops and a stabilized dc voltage supply for ratio metric transducers.
The high resolution, colour touch screen of the calibrator shows
only those buttons necessary for the immediate, selected tasks.
The buttons have been sized so that they can be operated by a
gloved hand, with no need for a stylus. The display can be
4
The DPI 620 includes comprehensive documenting features for
automating instrument calibration when used in conjunction with
Intecal Calibration Management software.
The compact and lightweight
calibrator is designed for
rugged field application, with a
robust casing and
weather-proofing to IP 65. It
features a high-speed digital
interface for connecting to
pressure modules and pressure
generating stations. This
interface will also allow
expansion to meet future
requirements when new
modules and stations become
available. It also features USB
connectivity and a microSD
card slot with 2 Gb of memory
installed as standard.
(The IS version has 1 Gb of
fixed internal memory.)
High performance HART communicator
The DPI 620 multifunction calibrator now incorporates a fully
featured HART® communicator which surpasses market leading
communicators in functionality, ease of use and upgrade support
such that a single hand held device can now configure the full
range of HART devices and perform mA trims and sensor
calibrations without the need for secondary equipment such as
ammeters, calibrators, power supplies and loop resistors. This can
significantly reduce equipment inventory, cost of ownership and
greatly simplify maintenance activities The DPI 620 contains the
latest application software and a complete library of registered
HART device descriptions. Upgrades can be simply downloaded free
of charge from our website.
An ATEX and IEC approved multifunction calibrator
and HART communicator with Windows CE
The four basic system components are available with ATEX and IEC
approval for use in hazardous areas. This provides a flexible and
expandable system that can be configured and operated safely in
areas with potentially explosive atmospheres.
A Multifunction Electrical Calibrator and HART
Communicator with Windows CE
The Windows CE-driven version of the electrical calibrator provides
all the computing power of a conventional hand-held PC or PDA. It
provides standard Windows file management and offers popular
Windows features to allow users to create text documents and view
common file types including Excel, Power Point, Word, pdf and
images. This means that operators can consult user manuals,
training presentations, data sheets, installation drawings etc while
in the field or on the plant.
5
The DPI 620 CE with WiFi*
Advanced Modular Calibrator and HART Communicator
A wireless IEEE 802.11g enabled Multifunction Electrical Calibrator and HART Communicator
(*Not available with the IS version)
The DPI 620 CE version can be further enhance with wireless IEEE 802.11g communications. For the first time, in a calibrator of this
type, it is possible to link to the Internet and remote networks in order to access information and to transfer data. This powerful
feature will benefit service technicians who spend extended periods away from head office and for those who need instant
access to data, safety information, system drawings, product datasheets etc., while on the move. It will also provide an interface to future
system modules when a physical connection is a hindrance.
Technical Specifications
DPI 620/CE General Specifications
Display
Size: 110 mm (4.3 in) diagonal; 480 x 272 pixels
LCD: Colour display with touch-screen
Languages
English {Default}, Chinese, French, German, Italian, Portuguese, Russian, Spanish
Operating temperature -10° to 50°C (14° to 122°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Ingress Protection
IP65 (Dust-tight, jets of water)
Humidity
0 to 90% RH Non condensing
Shock / Vibration
BS EN 61010:2001; Def Stan 66-31, 8.4 cat III, 1 m Drop Tested
EMC
Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety
Electrical – BS EN 61010 : 2001
Pressure safety
Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
Approved
CE Marked
Size (L: W: H)
DPI 620 only: 183 x114 x 42 mm (7.2 x 4.5 x 1.7 in) + MC 620: ≈ 265 x 114 x 64 mm ( 10.4 x 4.5 x 2.5 in)
+ PM 620: ≈ 265 x 114 x 93 mm (10.4 x 4.5 x 3.7 in)
Weight
DPI 620 only: ≈ 575 g (1.3 lb) – battery included. MC 620 only: ≈ 640 g (1.4 lb). PM 620 only: ≈ 100 g (0.2 lb).
Power supply
Lithium-Polymer battery (GE Part number : IO620-Battery); Capacity: 5040 mAh (minimum), 5280 mAh (typical); Nominal voltage:
3.7 V. Charge temperature: 0° to 40°C (32° to 104°F) Discharge temperature: -20° to 60°C (-4° to 140°F).
Note: For best battery performance, keep the temperature less than 60°C (140°F). Charge/discharge cycles: > 500 > 70% capacity.
Duration
Measure functions (CH1): ≈ 12 hours continuous. Dual Function, mA measure (CH2): ≈ 7 hours (24 V Source at 12 mA)
DPI 620 IS and DPI 620 IS CE Calibrator General Specifications
Display
Size: 110 mm (4.3 in) diagonal; 480 x 272 pixels
OLED Colour display with touch-screen
Languages
English {Default}, Chinese, French, German, Italian, Portuguese, Russian, Spanish
Operating temperature -10° to 40°C (14° to 104°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Ingress Protection
IP65 (Dust-tight, jets of water)
Humidity
0 to 90% RH Non condensing
Shock / Vibration
BS EN 61010:2001; Def Stan 66-31, 8.4 cat III, 1 m Drop Tested
EMC
Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety
Electrical – BS EN 61010 : 2001
Pressure safety
Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
Approved
CE Marked
Size (L: W: H)
DPI 620 only: 183 x114 x 55 mm (7.2 x 4.5 x 2.2 in) + MC 620: ≈ 265 x 114 x 77 mm ( 10.4 x 4.5 x 3 in)
+ PM 620: ≈ 265 x 114 x 93 mm (10.4 x 4.5 x 3.7 in)
Weight
DPI 620 only: ≈ 1.1 kg (2.4 lb) – battery included. MC 620 only: ≈ 800 g (1.8 lb). PM 620 only: ≈ 100 g (0.2 lb).
Power supply
NiMH battery (GE Part number: IO620IS-Battery); Capacity: 4000 mAh (typical); Nominal voltage: 3.6 V. Charge temperature: 0° to
40°C (32° to 104°F) Discharge temperature: -10° to 40°C (-14° to 104°F).
Note: For best battery performance, keep the temperature less than 60°C (140°F). Charge/discharge cycles: > 500 > 70% capacity.
Duration
Measure functions (CH1): ≈ 8 hours continuous. Dual Function, mA measure (CH2): ≈ 7 hours (24 V Source at 12 mA)
Approval
Baseefa10ATEX0010X
IECEx BAS 10.0002X
Ex II 1 G
Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +40°C)
EN60079-0:2009
Electrical apparatus for Potentially Explosive
Atmospheres – General Requirements.
(Harmonized)
(IEC 60079-0:2007 Edition 5)
EN60079-11:2007
Electrical apparatus for Potentially Explosive
Atmospheres – Intrinsic Safety ‘i’.
(Harmonized)
(IEC 60079-11:2006 Ed 5)
6
7
Electrical Measurement and Source
NLH&R
±1°C (2°F) for 24 hrs
(note 1)
%Rdg
+ %FS
Measure mode
DC Voltage
Thermocouple
TC mode -10 to 100 mV
± 200 mV
± 2000 mV
± 20 V
± 30 V
AC Voltage1* 0 to 2000 mVAC
0 to 20 VAC
0 to 300 VAC
Current
± 20 mA
± 55 mA
Resistance
RTD
(True,
0 to 400 Ω
4 wire)
0 to 4000 Ω
Resistance
RTD
(4 wire)
0 to 400 Ω
0 to 4000 Ω
Frequency
0 to 1000 Hz
1 kHz to 5 kHz**
0 to 999999 CPM
0 to 999999 CPH
Totalizing counter
Trigger level
Pressure
25 mbar to 1000 bar
(0.35 psi to 15000 psi)
IDOS external module
USB port
Source mode
DC Voltage
TC mode
TC mode -10 to 100 mV
0 to 200 mV
0 to 2000 mV
0 to 12 V
Current
0 to 24 mA
0 to 24 mA (24 V loop power)
24 V loop power
Resistance
RTD
0 to 400 Ω (0.1mA)
0 to 400 Ω (0.5mA)
400 to 2000 Ω (0.05mA)
2k to 4 kΩ (0.05mA)
Maximum input current
Frequency
0 to 1000 Hz
1kHz to 5 kHz**
Output waveform
Square wave peak output
0 to 99999 CPM
0 to 99999 CPH
Totalizing counter
Total Uncertainty
10° to 30°C (50° to 86°F)
for 1 year (note 3)
%Rdg
+ %FS
Please refer to Thermocouple specification table
0.0045
0.008
0.007/0.009**
0.0045
0.004
0.007/0.0085**
0.004
0.003
0.007/0.008**
0.0025/0.0035**
0.002/0.0025**
0.01/0.018**
0.0035/0.005**
0.0035/0.0045**
0.01/0.019**
0.125
0.125
0.2
0.1255
0.125
0.2
1
0.06
1.5
0.006
0.005
0.012/0.016**
0.005
0.005
0.016/0.019**
Please refer to RTD specification table
0.0055
0.001
0.009
0.0055
0.001
0.009
Please refer to RTD specification table
0.012
0.005
0.015
0.0115
0.0045
0.015
0.0003
0.0002
0.003
0.0003
0.0004
0.003
Refer to equivalent frequency
Refer to equivalent frequency
Maximum count 9999999
Automatic and adjustable 0 to 20 V
Please refer to PM 620 pressure range table
Additional error
-10° to 10°C (14° to 50°F)
30° to 50°C (86° to 122°F)
%Rdg/°C
+ %FS/°C
Resolution
0.01
0.005
0.005
0.002/0.0025**
0.004/0.0045**
0.15
0.15
0.1
0.006/0.0065**
0.005/0.0055**
0
0
0
0
0
0.005
0.005
0.05
0
0
0.0005
0.0005
0.0005
0.0005
0.0005
0.005
0.005
0.005
0.0005
0.0005
0.001
0.001
0.01
0.00001
0.0001
0.1
0.001
0.01
0.0001
0.0001
0.0012
0.0012
0
0
0.0005
0.0005
0.001
0.01
0.006
0.006
0.0002
0.0004
0
0
0.001
0.001
0.001
0.01
0.0001
0.00001
0.01
0.01
1
0.1
Note 3: Total uncertainty includes reference standard uncertainty NLH & R and typical long term stability for one year (k=2)
The display can be configured to show a maximum of 6 simultaneous reading windows as follows: CH1, CH2, P1, P2, IDOS, HART
*Not applicable to the IS version
**Only applicable to the IS version
8
CH2
CH2
CH2
CH2
CH2
CH2
P2
IDOS
USB
0.0005
0.0005
0.0005
0.0005
0.0005
0.0005
0.001
0.1
0.1
0.001
0.001
0.001
0.001
0.001
0.001
0.001
0.01
0.01
0.01
0.01
CH1
CH1
CH1
CH1
CH1
0.1
0.001
CH1
CH1
1
1
1
CH1
CH1
CH1
Note 1: NLH&R (non-linearity, hysteresis and repeatability) specification applies when calibration temperature is between 10 and 30°C (50°F and 86°F).
Note 2: Specification applies, 45 to 65Hz and between 10% and 100% of fullscale.**
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
CH1
P1
Please refer to IDOS UPM datasheet. P/N IO620-IDOS-USB+IO620-USB-PC required
Please refer to GE Sensing for compatible devices
Please refer to Thermocouple specification table
0.009
0.008
0.014
0.01
0
0.0045
0.004
0.007/0.0085**
0.005
0
0.004
0.003
0.007/0.008**
0.005
0
0.006
0.0035
0.01/0.018**
0.0035/0.004**
0
0.01
0.004
0.015/0.016**
0.005/0.0065**
0
0.01
0.004
0.015/0.016**
0.005/0.0065**
0
24 V ±10%
Please refer to RTD specification table
0.024
0.0035
0.03
0.0075
0
0.004
0.0025
0.008
0.003
0
0.048
0.0035
0.06
0.006
0
0.048
0.0035
0.06
0.0045
0
0-400 Ω 5 mA, 400-2000 Ω 1mA, 2000-4000 Ω 0.5 mA
0.0003
0.00023
0.003
0.00023
0.0003
0.000074
0.003
0.000074
Square, positive swing up to 12V (adjustable), negative swing -80mV (fixed)
Sine and Triangular, adjustable amplitude and offset within the limits -2.5 to +12 V
0 to 12 V +/-20mV (10 mA maximum)
Please refer to equivalent frequency
Please refer to equivalent frequency
Maximum count 1000000. Rate 1 to 50,000 pulses/sec
Display reading
window
CH1
CH1
CH1
CH1
CH1
CH2
CH2
“True Ohms” RTD Measure Mode (4-wire)
Type
Temperature
coefficient
Pt 50
3.85
Pt 100
3.85
Pt 100
3.92
Pt 200
3.85
Pt 500
3.85
Pt 1000 3.85
Cu 10
4.27
D 100
6.18
Ni 100
6.72
Ni 120
6.72
Temperature range
°C
°F
From
To
From
To
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
260.00 850.00 500.00 1562.00
-200.00
-60.00 -328.00
-76.00
-60.00
0.00
-76.00
32.00
0.00 850.00
32.00 1562.00
-200.00 -150.00 -328.00 -238.00
-150.00
0.00 -238.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
-200.00
0.00 -328.00
32.00
0.00 640.00
32.00 1184.00
-60.00
0.00
-76.00
32.00
0.00 250.00
32.00 482.00
-80.00
0.00 -112.00
32.00
0.00 270.00
32.00 518.00
270.00 320.00 518.00 608.00
Total Uncertainty
10° to 30°C (50° to 86°F) for 1
year
Rdg
Tos
%
°C
°F
0.012
0.05
0.09
0.012
0.05
0.09
0.012
0.04
0.07
0.012
0.04
0.07
0.012
0.04
0.07
0.012
0.04
0.07
0.01
0.03
0.051
0.01
0.03
0.051
0.015
0.077
0.14
0.01
0.026
0.044
0.015
0.05
0.086
0.012
0.05
0.086
0.009
0.024
0.04
0.011
0.036
0.061
0.012
0.036
0.061
0.00
0.14
0.25
0.00
0.17
0.3
0.01
0.035
0.06
0.012
0.035
0.06
0.00
0.026
0.047
0.00
0.03
0.055
0.00
0.022
0.04
0.00
0.028
0.05
0.00
0.057
0.1
Standard RTD Measure Mode (4-wire)
Type
Temperature
coefficient
Pt 50
3.85
Pt 100
3.85
Pt 100
3.92
Pt 200
3.85
Pt 500
3.85
Pt 1000 3.85
Cu 10
4.27
D 100
6.18
Ni 100
6.72
Ni 120
6.72
Temperature range
°C
°F
From
To
From
To
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
260.00 850.00 500.00 1562.00
-200.00
-60.00 -328.00
-76.00
-60.00
0.00
-76.00
32.00
0.00 850.00
32.00 1562.00
-200.00 -150.00 -328.00 -238.00
-150.00
0.00 -238.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
-200.00
0.00 -328.00
32.00
0.00 640.00
32.00 1184.00
-60.00
0.00
-76.00
32.00
0.00 250.00
32.00 482.00
-80.00
0.00 -112.00
32.00
0.00 270.00
32.00 518.00
270.00 320.00 518.00 608.00
Total Uncertainty
10° to 30°C (50° to 86°F) for 1
year
Rdg
Tos
%
°C
°F
0.021
0.16
0.28
0.024
0.16
0.28
0.017
0.1
0.175
0.0215 0.1
0.174
0.017
0.1
0.175
0.0215 0.1
0.174
0.017
0.069
0.12
0.018
0.069
0.12
0.033
0.33
0.6
0.0165 0.051
0.09
0.017
0.16
0.29
0.024
0.16
0.28
0.016
0.044
0.074
0.018
0.1
0.175
0.0215 0.1
0.174
0.035
0.66
1.18
0.01
0.66
1.18
0.019
0.1
0.174
0.02
0.1
0.174
0.00
0.071
0.13
0.002
0.071
0.13
0.00
0.06
0.11
0.00
0.06
0.11
0.00
0.2
0.36
9
RTD Simulate Mode (0.1mA min, 0-400Ω; 0.05mA min, 400-4000Ω)
Type
Temperature
coefficient
Pt 50
3.85
Pt 100
3.85
Pt 100
3.92
Pt 200
3.85
Pt 500
3.85
Pt 1000 3.85
Cu 10
4.27
D 100
6.18
Ni 100
6.72
Ni 120
6.72
10
Temperature range
°C
°F
From
To
From
To
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 850.00
32.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
260.00 850.00 500.00 1562.00
-200.00
-60.00 -328.00
-76.00
-60.00
0.00
-76.00
32.00
0.00 850.00
32.00 1562.00
-200.00 -150.00 -328.00 -238.00
-150.00
0.00 -238.00
32.00
0.00 260.00
32.00 500.00
260.00 850.00 500.00 1562.00
-200.00
0.00 -328.00
32.00
0.00 260.00
32.00 500.00
-200.00
0.00 -328.00
32.00
0.00 640.00
32.00 1184.00
-60.00
0.00
-76.00
32.00
0.00 250.00
32.00 482.00
-80.00
0.00 -112.00
32.00
0.00 270.00
32.00 518.00
270.00 320.00 518.00 608.00
Total Uncertainty
10° to 30°C (50° to 86°F) for 1
year
Rdg
Tos
%
°C
°F
0.043
0.24
0.42
0.043
0.24
0.42
0.04
0.16
0.28
0.04
0.16
0.28
0.04
0.16
0.28
0.04
0.16
0.28
0.0345 0.12
0.21
0.0345 0.12
0.21
0.087
0.28
0.48
0.033
0.095
0.16
0.078
0.23
0.39
0.078
0.23
0.39
0.032
0.085
0.15
0.0675 0.19
0.32
0.0675 0.19
0.32
0.082
0.17
0.28
0.00
0.85
1.53
0.00
0.92
1.66
0.038
0.16
0.28
0.038
0.16
0.28
0.00
0.12
0.22
0.00
0.12
0.22
0.00
0.11
0.2
0.00
0.11
0.2
0.00
0.25
0.45
6 Note:
These figures relate to DPI 620 uncertainties only.
For RTD Measure and Source functions the uncertainty
is given by:Urtd = T(°C) x %Rdg + Tos (°C)
or
Urtd = T(°F) x%Rdg + Tos (°F)
where T( ) is the measurement expressed in °C or °F.
Measurement resolution:
0.01 °C/F. Simulation resolution 0.1 °C/F
Excitation current:
Measure mode 0 to 400Ω 2.5mA, 400Ω to
4000Ω 0.5mA;
imulate mode 0 to 400 Ω 5mA max, 0.4 to 2kΩ
S
1mA max and 2 to 4kΩ 0.5mA max.
imulate mode pulsed excitation current minimum
S
duration 10 ms
Specifications relate to DPI 620 uncertainties only
Measurement resolution 0.01 °C/F. Simulation
resolution 0.1 °C/F
Thermocouple Measurement and Simulation
Type
Standard
Cold Junction (CJ) Error (maximum) Range: 10 to 30°C (50 to 86°F) = 0.2°C (0.4°F)
Add 0.01°C (0.02°F) CJ Error/° ambient temperature
change for ranges: -10 to 10°C, 30 to 50°C
(14 to 50°F, 86 to 122°F) B
IEC 584
E
IEC 584
J
IEC 584
K
IEC 584
L
DIN 43710
N
IEC 584
R
IEC 584
S
IEC 584
T
IEC 584
U
DIN 43710
C
D
Temperature range
(range shows correct resolution)
From
250.00
500.00
700.00
1200.00
-270.00
-200.00
-120.00
-210.00
-140.00
-270.00
-220.00
-160.00
-60.00
800.00
-200.00
-100.00
-270.00
-200.00
-40.00
-50.00
360.00
-50.00
70.00
320.00
660.00
-270.00
-230.00
-50.00
-200.00
-50.00
0.00
1600.00
2000.00
0.00
100.00
270.00
1200.00
°C
To
500.00
700.00
1200.00
1820.00
-200.00
-120.00
1000.00
-140.00
1200.00
-220.00
-160.00
-60.00
800.00
1370.00
-100.00
900.00
-200.00
-40.00
1300.00
360.00
1760.00
70.00
320.00
660.00
1740.00
-230.00
-50.00
400.00
-50.00
600.00
1600.00
2000.00
2300.00
100.00
270.00
1200.00
1800.00
From
482.00
932.00
1292.00
2192.00
-454.00
-328.00
-184.00
-346.00
-220.00
-454.00
-364.00
-256.00
-76.00
1472.00
-328.00
-148.00
-454.00
-328.00
-40.00
-58.00
680.00
-58.00
158.00
608.00
1220.00
-454.00
-382.00
-58.00
-328.00
-58.00
32.00
2912.00
3632.00
32.00
212.00
518.00
2192.00
°F
To
932.00
1292.00
2192.00
3308.00
-328.00
-184.00
1832.00
-220.00
2192.00
-364.00
-256.00
-76.00
1472.00
2498.00
-148.00
1652.00
-328.00
-40.00
2372.00
680.00
3200.00
158.00
608.00
1220.00
3164.00
-382.00
-58.00
752.00
-58.00
1112.00
2912.00
3632.00
4172.00
212.00
518.00
2192.00
3272.00
Total Uncertainty
10° to 30°C (50° to 86°F)
for 1 year
°C
°F
4.00
2.00
1.50
1.00
2.00
0.50
0.25
0.50
0.30
4.00
1.00
0.50
0.30
0.50
0.40
0.25
7.00
1.00
0.40
3.00
1.00
3.00
1.50
1.10
1.00
3.00
1.00
0.30
0.60
0.30
0.80
1.00
1.40
1.10
0.80
0.60
0.80
7.20
3.60
2.70
1.80
3.60
0.90
0.45
0.90
0.54
7.20
1.80
0.90
0.54
0.90
0.72
0.45
12.60
1.80
0.72
5.40
1.80
5.40
2.70
1.98
1.80
5.40
1.80
0.54
1.08
0.54
1.44
1.80
2.52
1.98
1.44
1.08
1.44
11
PM 620 Pressure
Modules
Features
MC 620 Module Carrier
Features
• 2 independent pressure channels
• Simple to re-range
• Fully interchangeable with no need for set-up or calibration
• No tools or setup – just a simple screw fit
• Simple screw fit - hand tight no tools required
• Pressure protection
• Ranges from 25 mbar to 1000 bar (10 inH2O to 15000 psi)
• Accuracy from 0.005% FS
The PM 620 is the latest development in digital output sensor
technology incorporating a number of key innovations to allow
pressure re-ranging of compatible equipment. A simple screw fit
makes both the pressure and electrical connections without the
need for tools, sealing tape, cables or plugs and digital
characterisation allows interchangeability without set-up or
calibration. The modules can be changed in a few seconds to
re-range an instrument at a fraction of the cost of a new one.
The pressure modules can be used in conjunction with the
relevant pneumatic or hydraulic pressure station and the DPI 620
multifunction calibrator to form an integrated pressure calibrator
for test and calibration of pressure instruments including
transmitters, transducers, switches, gauges, indicators and
recorders. Alternatively, the modules can be combined with the
pressure station by a module carrier, which adds a dual channel
pressure measurement capability that can be re-ranged in seconds.
The MC 620 module carrier attaches the head of the DPI 620 to
provide two independent pressure measurement channels. These
can be fitted with any PM 620 pressure module from 25 mbar to
1000 bar (10 inH2O to 15000 psi). A simple screw fit means no tools
are required and ensures both a high integrity pressure seal and a
reliable digital interface.
The pressure connection to the device under test is a simple finger
tight system with interchangeable adaptors. This tool-less
connection method is quick to use and provides a high integrity
seal. The same system is used on the interconnecting hose and
adaptor accessories, such that the only connection requiring
tools and seals/sealing tape is the final connection to the device
under test.
The carrier is also designed for pressure safety and will
automatically seal if a module is not fitted or if the user attempts to
remove it.
Pressure ranges are available from 25 mbar to 1000 bar (10 inH2O
to 15000 psi) with a total measurement uncertainty, including
operation over 0 to 50o C (32 to 122°F) for one year.
MC 620 Specification
Maximum pressure
Pressure media
Pressure safety
Size and weight
400 bar (5800 psi) pneumatic
1000 bar (15000 psi) hydraulic
Compatible with stainless steel and nitrile
seals
Pressure equipment directive class SEP
80 mm x 100 mm x 110 mm, 640 g
MC 620 IS Specification
Operating Temperature -10° to 40°C ( 14° to 104°F)
Size and weight
78 mm x 100 mm x 110 mm, 820 g
12
PM 620 Specification
Maximum intermittent pressure
Maximum working pressure
Sealing
PM 620 IS Pressure Module and Dummy Pressure
Module Specification
2 x FS
110% FS
IP 65 (protected against dust and
jets of water)
-10 to 50°C (14 to 122°F)
-20 to 70°C (-4 to 158°F)
0 to 90% RH non condensing
BS EN 61010:2001; Def stan 66-31,
8.4 cat III), 1 m Drop Tested
BS EN 61326-1:2006
BS EN 61010:2001
Pressure equipment directive class
SEP
CE marked
L. 56 mm, Dia. 44 mm,
106 g maximum
Operating temperature
Storage temperature
Humidity
Shock and vibration
EMC
Electrical safety
Pressure safety
Approval
Size and weight
Operating temperature
Approval
EN60079-0:2009
EN60079-11:2007
Gauge Ranges (referenced to atmosphere)
Media
bar
±0.025
±0.07
±0.2
±0.35
±0.7
±1
-1 to 2
-1 to 3.5
-1 to 7
-1 to 10
-1 to 20
0 to 35
0 to 70
0 to 100
0 to 135
0 to 200
psi
±10 inH2O
±1
±3
±5
±10
-14.5 to 15
-14.5 to 30
-14.5 to 50
-14.5 to 100
-14.5 to 150
-14.5 to 300
0 to 500
0 to 1000
0 to 1500
0 to 2000
0 to 3000
NLH&R
20°C ±2°C
(68°F ± 4°F)
24 hr
NLH&R
0° to 50°C
(32° to 122°F)
24 hr
Gauge
%FS
0.090
0.025
0.020
0.020
0.015
0.015
0.015
0.010
0.010
0.005
0.005
0.005
0.005
0.005
0.005
0.005
Gauge
%FS
0.090
0.030
0.027
0.025
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
Total
uncertainty
0° to 50°C
(32° to 122°F)
for 1 year
Gauge
%FS
0.100
0.047
0.045
0.044
0.041
0.041
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
0.025
-10 to 40°C (14 to 104°F)
Baseefa10ATEX0012X
IECEx BAS 10.0004X
Ex II 1 G
Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C)
Electrical apparatus for Potentially
Explosive Atmospheres – General Requirements. (Harmonized)
(IEC 60079-0:2007 Edition 5)
Electrical apparatus for Potentially
Explosive Atmospheres – Intrinsic
Safety ‘i’. (Harmonized)
(IEC 60079-11:2006 Ed 5)
NLH&R Non-linearity, hysteresis and repeatability

Compatible with non-corrosive gas/fluid

Compatible with stainless steel
*
The reading can be referenced to ambient air
pressure via a software feature of the DPI 620
allowing the same module to be switched
between absolute and sealed gauge
measurement
DPI 620 pressure resolution: adjustable 4 to 7 digits
Uncertainty confidence level 95% (K=2)
Absolute Ranges (referenced to vacuum)
Media
bar
0 to 0.35
0 to 1.2
0 to 2
0 to 3.5
0 to 7
0 to 10
0 to 20
0 to 35
0 to 70
0 to 100
0 to 135
0 to 200
0 to 350
0 to 700
0 to 1000
psi
0 to 5
0 to 35 inHg
0 to 30
0 to 50
0 to 100
0 to 150
0 to 300
0 to 500
0 to 1000
0 to 1500
0 to 2000
0 to 3000
0 to 5000
0 to 10000
0 to 15000
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
NLH&R
20°C ±2°C
(68°F ± 4°F)
24 hr
Absolute
%FS
0.030
0.020
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
0.015
NLH&R
20°C ±2°C
(68°F ± 4°F)
24 hr
*Sealed
Gauge
%FS
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
0.005
NLH&R
0° to 50°C
(32° to 122°F)
24 hr
Absolute
%FS
0.050
0.036
0.036
0.036
0.036
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.033
0.033
0.033
NLH&R
0° to 50°C
(32° to 122°F)
24 hr
*Sealed
Gauge
%FS
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
Total uncertainty
0° to 50°C
(32° to 122°F)
for 1 year
Absolute
*Sealed
Gauge
*%FS
%FS
0.080
0.070
0.052
0.050
0.050
0.047
0.025
0.047
0.025
0.047
0.025
0.047
0.025
0.046
0.025
0.046
0.025
0.046
0.025
0.049
0.025
0.049
0.025
0.049
0.025
13
The PV 621, 622 and 623
Pressure Stations
Features
• A uniquely capable, re-rangeable and self contained pressure test
system
• Advanced pressure generation
- 95% vacuum to 20 bar (300 psi) pneumatic
- 95% vacuum to 100 bar (1500 psi) pneumatic
- 0 to 1000 bar (15000 psi) hydraulic
• Stand alone replacements for hand pumps
• Bench top use as comparators
There are three pressure generation stations: the PV 621, a
pneumatic pressure generator for pressures 95% vacuum to
20 bar (300 psi); the PV 622, a pneumatic pressure generator for
pressures 95% vacuum to 100 bar (1500 psi); and the PV 623, a
hydraulic pressure generator for pressures up to 1000 bar
(15000 psi). Each pressure station is designed for stand-alone
operation as a pressure generator and can replace conventional
hand pumps to provide greater efficiency and ease of use. They can
also be used on the workbench as a comparators.
The PV 621 has a conventional hand pump, volume adjuster and
pressure/vacuum selector, but will generate pressure with half the
effort of conventional systems.
The PV 622 100 bar (1500 psi) pneumatic station represents a
five-fold increase in capability and solves the transportation and
health and safety issues of using gas bottles and regulators as a
pressure source in field locations. It features an innovative dual
stage system incorporating a hand pump to generate pressure and
a screw press to intensify the pressure. For a typical 4” gauge
mounted on the station, 100 bar (1500 psi) can be achieved in just
one cycle, but the process can be repeated as many times as
required for higher volume systems. The screw press converts to a
precision volume adjuster allowing the test pressure to be increased
or decreased as required.
The PV 623 solves many of the problems associated with hydraulic
pressure generation by generating pressure to 1000 bar (15000 psi)
and providing a stable pressure within 1 minute. In conventional
systems priming to remove air is wasteful and messy and pressure
stability is only achieved after several minutes. This instability is the
result of thermal change, seen as a large pressure leak, which can
render the device unusable for calibration for 10 minutes per
pressure test.
Operation of the PV 623 is simple. The screw press is rotated
anti-clockwise to fill the screw press with hydraulic fluid from an
internal reservoir. The screw press is then rotated clockwise to fill
the test device and compress the hydraulic fluid. For larger volume
systems the process can be repeated, a non-return valve prevents
pressure loss on the refill cycle. When the test pressure has been
reached the screw press converts to a precision volume adjuster for
making fine adjustments.
Combining any of the pressure stations with a PM 620 pressure
module and the DPI 620 calibrator creates a uniquely capable,
self-contained pressure calibrator.
PV 621, 622 and 623 Specification
Maximum pressure
PV 621 20 bar (300 psi) pneumatic
PV 622 100 bar (1500 psi) pneumatic
PV 623 1000 bar (15000 psi) hydraulic
Pressure media
PV 621 and PV 622 non-corrosive gases,
PV 623 de-mineralized water or mineral oil
(ISO viscosity grade < 22)
Operating temperature -10° to 50°C (14° to 122°F)
For water +4 to +50°C (39 to 122°F)
Storage temperature
-20 to 70°C (-4 to 158°F) (must be empty of water)
Shock and vibration
BS EN 61010:2001; Def stan 66-31, 8.4 cat III,
1 m drop tested
Pressure safety
Pressure equipment directive class SEP
Size and weight
450 mm x 280 mm x 235 mm,
PV 621 2.65 kg, PV 622 3.30 kg, PV 623 3.75 kg
PV 62X IS Pressure Station Specification
Operating temperature
PV 621
PV 623
PV 622
EN60079-0:2009
EN60079-11:2007
14
-10° to 40°C ( 14° to 104°F)
Baseefa10ATEX0011X
IECEx BAS 10.0003X
Page 11 of 46 TR0753 Issue 1
Ex II 2 G
Electrical apparatus for Potentially Explosive
Atmospheres – General Requirements.
(Harmonized)
(IEC 60079-0:2007 Edition 5)
Electrical apparatus for Potentially Explosive
Atmospheres – Intrinsic Safety ‘i’.
(Harmonized)
(IEC 60079-11:2006 Ed 5)
15
Ordering Information
Please order the following model numbers and part numbers as
separate line items.
Model DPI 620
Advanced modular calibrator
Model DPI 620 CE
Advanced modular calibrator with Windows CE
The DPI 620/CE are supplied with a rechargeable lithium polymer
battery P/N IO620-BATTERY, universal mains adaptor/charger P/N
IO620-PSU, IO620-AC 300 VAC true rms measurement probe, test
leads, calibration certificate, quick reference guide and CD with
multilingual user manuals.
Model DPI 620 IS
Intrinsically safe advanced modular calibrator
Model DPI 620 IS CE
Intrinsically safe advanced modular calibrator with Windows CE
The DPI 620 IS/IS CE are supplied with a rechargeable NiMH battery
P/N IO620IS-BATTERY, battery charger IO620IS-CHARGER and
battery charging station IO620IS-CRADLE, test leads, calibration
certificate, quick reference guide and CD with multilingual manuals.
Model MC 620
Pressure module carrier
Supplied with G 1/8 female and 1/8 NPT female adaptors (2 of
each).
Model MC 620 IS
Intrinsically safe pressure module carrier
Model PM 620 “pressure range” and “type”
Pressure module. Supplied with calibration certificate.
e.g., PM 620 20 bar (300 psi) gauge
Model PM 620 IS “pressure range” and “type”
Intrinsically safe pressure module. Supplied with calibration
certificate.
e.g. PM 620 IS 20 bar (300 psi) gauge
Model PV 621
Pneumatic pressure station 20 bar (300 psi)
Model PV 621 IS
Intrinsically safe pneumatic pressure station 20 bar (300 psi)
Model PV 622
Pneumatic pressure station 100 bar (1500 psi)
Model PV 622 IS
Intrinsically safe pneumatic pressure station 100 bar (1500 psi)
Model PV 623
Hydraulic pressure station 1000 bar (15000 psi)
Model PV 623 IS
Intrinsically safe hydraulic pressure station 1000 bar (15000 psi)
The PV 621, 622 and 623 are supplied with G1/8 female and 1/8 NPT
female adaptors, carry strap, quick reference guide and CD with
multilingual user manual. In addition, the PV 623 includes a plastic
bottle for hydraulic fluid.
16
DPI 620 / DPI 620 CE
Accessoriess
Intecal Basic (P/N 781-016-B)
Developed to meet the growing demand on industry to comply with
quality systems and calibration documentation. Device test
procedures are created in a Windows® based application and are
allocated to work orders for transfer to the DPI 620. The procedures
configure the DPI 620 parameters, automatically manage As Found
and As Left calibrations and report the results with Pass/Fail status.
Results are uploaded to the PC for archiving and to print calibration
certificates.
Intecal Advanced (P/N 781-016-A)
Builds on the concept of Intecal Basic supporting both portable
calibrators and on-line workshop instruments. Intecal is
simple-to-use calibration management software, which enables a
high productivity of scheduling, calibration and documentation.
Intecal Field Calibration Manager
(P/N IO620-FIELD-CAL)
This software module adds the general features of Intecal calibration
management software to the DPI 620 allowing new device records
and procedures to be created in the field while giving access to full
historical data and trend analysis. It works seamlessly with the
documenting capability of the DPI 620 to automate field calibration
and it can operate independently of a PC as a stand-alone calibrator
and instrument database or it can fully integrate with the PC master
database of Intecal Calibration Management Software. This module
is ideal for field service technicians who spend extended periods
away from the head office or for those who need full database
access when out on the plant. Complete sections of the Intecal
database, containing all the device details, procedures and historical
records for multiple work locations, can be transferred to the DPI 620
or split between multiple DPI 620s for larger teams. This transfer of
data and the eventual synchronizing of the master database can be
achieved in a numbers of ways; SD memory card, USB memory stick,
USB cable and via WiFi connectivity to the internet and remote
networks. A demonstration version of Field Calibration Manager is
provided in all new DPI 620s. It is limited to 5 device records but can
be fully enable by purchasing IO620-FIELD-CAL.
For more information on Intecal and a 30 day free trial visit
www.gesensing.com
Replacement AC voltage measurement probe (P/N
IO620-AC)1
Attaches to the DPI 620 30 V sockets to provide 300 VAC true rms
measurement. IO620-AC is supplied as standard with all new
DPI 620/CE.
Carrying case (P/N IO620-CASE-1) 1
A protective carrying case with belt loop, shoulder strap and large
pocket for test leads and accessories.
Carrying case (IO620-CASE-1-IS)
USB cable (P/N IO620-USB-PC) 2
As IO620-CASE-1 but suitable for use in hazardous areas
Connects the DPI 620 to a PC.
System carrying case (P/N IO620-CASE-2) 1
IDOS to USB converter (P/N IO620-IDOS-USB) 1
A protective carrying case for system components including the DPI
620, MC 620, PM 620 modules, test leads, hose and adaptors.
Allows connection of an IDOS universal pressure module to the
DPI 620. IO620-USB-PC is also required to connect the converter to
the DPI 620 USB port.
System carrying case (IO620-CASE-2-IS)
As IO620-CASE-2 but suitable for use in hazardous areas
System carrying case IO620-CASE-3-IS
As IO620-CASE-3 but suitable for use in hazardous areas
Spare/replacement lithium polymer rechargeable
battery (P/N IO620-BATTERY) 1
Spare/replacement battery for the DPI 620/CE. IO620-BATTERY is
supplied as standard with all new DPI 620/CE.
Spare/replacement NiMH rechargeable battery
(IO620IS-BATTERY ) Spare/replacement NiMH rechargeable battery. Only suitable for
use with the DPI 620 IS/IS CE. Only charge using IO620IS-CHARGER
and IO620IS-CRADLE
Battery charging station (P/N IO620-CHARGER) 1
This external battery charger allows a spare battery to be charged
independently of the DPI 620 for minimum instrument down time.
Power is provided by the standard mains adaptor. A complete
charge cycle takes approximately 4 hours. Simultaneously, the DPI
620 can be connected via a USB cable to provide a top-up charge
(full charge in 12 hours).
Spare/replacement battery charger.
(IO620IS-CHARGER)
Spare/replacement battery charger. Only suitable for charging
IO620IS-BATTERY. Must be used in conjunction withIO620IS-CRADLE.
Spare/replacement battery charging station
(IO620IS-CRADLE Ex)
Spare/replacement battery charging station. Only suitable for use
with IO620IS-BATTERY and IO620IS-CHARGER.
Spare/replacement mains adaptor
(P/N IO620-PSU) 1
USB to RS 232 cable (P/N IO620-USB-RS232) 1
Connects the DPI 620 to an RS 232 interface.
WiFi IEEE 802.11g for DPI 620 CE (P/N IO620-WIFI)
Micro SD wireless communication card to provide IEEE 802.11g
compatibility for connecting with PCs and wireless networks. Only
suitable for use with the DPI 620 CE which provides wireless
network configuration tools and Microsoft Internet Explorer.
Accessories specifically
for the DPI 620 IS / CE
Carrying case (IO620-CASE-1-IS)
As IO620-CASE-1 but suitable for use in hazardous areas
System carrying case (IO620-CASE-2-IS)
As IO620-CASE-2 but suitable for use in hazardous areas
Spare/replacement NiMH rechargeable battery
(IO620IS-BATTERY)
Spare/replacement NiMH rechargeable battery. Only suitable for
use with the DPI 620 IS/IS CE. Only charge using IO620IS-CHARGER
and IO620IS-CRADLE
Spare/replacement battery charger.
(IO620IS-CHARGER)
Spare/replacement battery charger. Only suitable for charging
IO620IS-BATTERY. Must be used in conjunction withIO620IS-CRADLE.
Spare/replacement battery charging station
(IO620IS-CRADLE Ex)
Spare/replacement battery charging station. Only suitable for use
with IO620IS-BATTERY and IO620IS-CHARGER.
A spare/replacement universal mains adaptor for use with DPI 620
and IO620-CHARGER. Input voltage 100 to 240 VAC 50/60 Hz. Mains
socket adaptors are provided. IO620-PSU is supplied as standard
with all new DPI 620/CE.
17
PV 621, 622, 623 and
MC 620 Accessories
Dirt moisture trap
Prevents contamination of the PV 621 and 622 pneumatic systems
and cross contamination from one device under test to another. The
IDT connects directly to the PV 621 and 622 pressure port and
replicates the quick fit connection for compatibility with the hose
and adaptor kits
P/N IO620-IDT621: Maximum working pressure 20 bar (300 psi)
PN IO620-IDT622: Maximum working pressure 100 bar (1500 psi)
Pressure relief valve
When fitted to a PV 62X pressure station protects the PM 620
pressure module and the device under test from overpressure.
Relief Valve Table
Part number
For use with
IO620-PRV-P1
IO620-PRV-P2
IO620-PRV-P3
IO620-PRV-P4
IO620-PRV-P5
IO620-PRV-P6
IO620-PRV-P7
IO620-PRV-P8
IO620-PRV-H1
IO620-PRV-H2
IO620-PRV-H3
IO620-PRV-H4
IO620-PRV-H5
PV 621 PV 622
PV 621 PV 622
PV 621 PV 622
PV 622
PV 622
PV 621 PV 622
PV 621 PV 622
PV 621 PV 622
PV 623
PV 623
PV 623
PV 623
PV 623
Factory
setting
bar psi
1
15
5
100
30
435
60
870
100 1500
3
45
12
170
18
260
50
725
200 3000
400 6000
700 10000
1000 15000
Adjustable range
bar
0.2 to 1
3 to 7
16 to 32
30 to 60
60 to 100
1.1 to 3
6.1 to 12
12.1 to 18
10 to 50
50 to 200
200 to 400
300 to 700
600 to 1000
psi
3 to 15
45 to 100
230 to 460
435 to 870
870 to 1500
16 to 45
90 to 170
175 to 260
145 to 725
725 to 2900
2900 to 5800
4350 to 10000
8700 to 15000
Pressure station carrying case
(P/N IO620-CASE-3) 1
A protective carrying case with shoulder strap and large pocket for
accessories. Also accommodates the assemble system including
the DPI 620 and PM 620.
Modular system transit case (P/N IO620-CASE-4) 2
A rigid transit case with wheels and an extendable handle.
Accommodates two PV 62X pressure stations, DPI 620, MC 620 and
PM 620 modules, with ample storage space for accessories. Size:
736 mm x 554 mm x 267 mm. Weight: 8,5 kg empty
Pneumatic hose kit 1
A high pressure pneumatic hose rated to 400 bar (5800 psi).
Tool less quick fit to the PV 621, PV 622 and MC 620 pressure ports.
Terminated with a quick fit connector compatible with the test point
adaptors supplied with the PV 62X, MC 620 and the adaptor sets.
P/N IO620-HOSE-P1: 1 metre pneumatic hose kit
P/N IO620-HOSE-P2: 2 metre pneumatic hose kit
P/N IO620-HOSE-P1-IS As IO620-HOSE-P1 but suitable for use in hazardous areas
18
P/N IO620-HOSE-P2-IS
As IO620-HOSE-P2 but suitable for use in hazardous areas
DPI 620 Hydraulic hose kit 1
A high pressure hydraulic hose rated to 1000 bar (15000 psi).
Tool less quick fit to the PV 623 and MC 620 pressure ports.
Terminated with a quick fit connector compatible with the test point
adaptors supplied with the PV 62X, MC 620 and the adaptor sets.
P/N IO620-HOSE-H1: 1 metre hydraulic hose kit
P/N IO620-HOSE-H2: 2 metre hydraulic hose kit
P/N IO620-HOSE-H1-IS As IO620-HOSE-H1 but suitable for use in hazardous areas
IO620-HOSE-H2-IS As IO620-HOSE-H2 but suitable for use in hazardous areas
Pressure adaptor set
A set of test point adaptors to connect the tool less quick fit PV 62X,
MC 620 and the extension hoses to the device under test.
P/N IO620-BSP: G1/8 male and G¼ male, G¼ female, G3/8 female
and G½ female
P/N IO620-NPT: 1/8” male and ¼”male, ¼” female, 3/8” female, and
½” female
P/N IO620-MET: 14 mm and 20 mm female
Comparator adaptor (P/N IO620-COMP)
Allows the PV 62X pressure station to be used as a comparator. The
adaptor connects to the stations pressure port and provides two
outlet ports for making gauge comparisons.. Compatible
with the test point adaptors supplied with the PV 62X and the
adaptors sets.
Blanking plug (P/N IO620-BLANK)
Allows the PV 621 and 622 to be used as pressure generators
independently of the DPI 620 and PM 620 by blanking the PV 62X
pressure module port. Not required for the DPI 623 as the port is
self-sealing.
DPI 104 Gauge adaptor (P/N IO620-104 ADAPT)
Allows a DPI 104 digital pressure gauge to be connected to the PV
62X pressure module port in place of DPI 620 and PM 620 to provide
a simple low cost pressure calibrator.
Accessories specifically
for the PV 621 IS, 622 IS
and 623 IS
System carrying case (IO620-CASE-3-IS)
As IO620-CASE-3 but suitable for use in hazardous areas
Pneumatic hose kit
P/N IO620-HOSE-P1-IS
As IO620-HOSE-P1 but suitable for use in hazardous areas
P/N IO620-HOSE-P2-IS
As IO620-HOSE-P2 but suitable for use in hazardous areas
Hydraulic hose kit
P/N IO620-HOSE-H1-IS
As IO620-HOSE-H1 but suitable for use in hazardous areas
P/N IO620-HOSE-H2-IS
As IO620-HOSE-H2 but suitable for use in hazardous areas
1 Not suitable for use with the DPI 620 IS/IS CE.
2 Safe area use only.
Supporting Services
GE Sensing provides Services to enhance, support and complement
the AMC product range. Our highly trained staff can support you, no
matter where you are in the world.
Pressure measurement training
GE Sensing’s training and education program offers comprehensive
standard and customized curricula focusing on operation,
application, maintenance and technology. For AMC users we
recommend the 3 day Principles of Automated Pressure Calibration
Training course. This is regularly delivered and classes can be held
at various locations, your local facility or through on-line delivery.
Quality training enables your engineers & technicians to optimize
your business’ performance.
Nationally accredited calibration
New product is supplied with factory calibration certificates with
measurements traceable back to international standards. For
applications where initial nationally accredited calibration
certificates are required or periodic re-calibration is desired GE
sensing can provide the solution.
Extended warranty terms
New product is supplied with an industry benchmarked initial
warranty. For peace of mind, improved cost predictability and
Increased assurance, extend coverage on your equipment by up to
5 years term.
Multi-year calibration and repair services agreements Available for
controllers & calibrators, multi-year service agreements increase
cost predictability by providing fixed rates for extended periods.
With larger scope undertakings customized plans can be adapted
to your needs.
Assisting our customers in meeting peak demands, unexpected
situations, evaluations and also to minimise downtime of important
processes a wide range of measurement, test and calibration
equipment is available on a short-term rental basis …from pressure
indicators to portable calibrators and sophisticated air data test
systems. The rental fleet is available from inventory, Factory tested
& calibrated with a minimum rental period only 1 week. With larger
scope undertakings any product can be made available for rental.
Maintenance
Should your equipment need maintenance our global repair
facilities are happy to serve. Work is conducted by trained approved
technicians, using controlled original equipment parts and
procedures so restoring the product to design condition. This is
particularly important for the performance expectations and
advanced features incorporated in the AMC range. Should you wish
to conduct you own maintenance a number of spares kits are
available to facilitate this.
Services Ordering Information
Please order the following as separate line items.
Calibration
IO620-CAL-ELEC
DPI 620 Multifunction calibrator accredited calibration.
IO620-CAL-PRESS
PM 620 Pressure module accredited calibration.
Extended Warranty
Extend your instruments manufacturer’s warranty to 2, 3, 4 or 5
years.
WARRANTY- *
Where * = 2, 3, 4 or 5 to indicate your required extended warranty
period (eg: WARRANTY-3)
Calibration and Repair Contracts
Three levels of calibration and repair service contracts are available.
Bronze – Accredited calibration only (pre and post adjustment
results given)
Silver – Accredited calibration and Level A repair
Gold – Accredited calibration and Level A and Level B repair
Available in yearly intervals up to 5 years.
CALREP-BRONZE- *
CALREP-SILVER- *
CALREP-GOLD- *
Where * = 1, 2, 3, 4 or 5 to indicate your required calibration and
repair contract period (eg: CALREP-SILVER-3)
Rental
GE’s rental program offers a simple, quick and affordable solution
for unexpected measurement need. Rentals allow customers to be
fully operational when challenges that are not foreseen arise.
Note:
Level A repair covers, valves, seals and fittings
Level B repair covers, main PCA and manifold (where applicable)
19
© 2010 All Rights Reserved.
Version control SDS 0003 issue 2
All specifications are subject to change for product improvement without notice. GE®
is a registered trademark of General Electric Co. Other company or product names
mentioned in this document may be trademarks or registered trademarks of their
respective companies, which are not affiliated with GE.
www.gesensinginspection.com
2010 GE. All rights reserved. BR-173D-2
Download PDF