4+ Label Printer – The All-rounder. Made in Germany. Technical details. Label printer A4+ with dispense function 1 2 7 3 8 4 5 6 9 1 2 3 Big graphic display 5 8 Internal rewinder White backlight for optimum readability. Add-on modules such as cutters, external The three-part tightening axles ensure the Ribbon holder rewinders, present sensors and applica easy rewinding and removing of labels or Three-part tightening axles enable quick tors are easy to connect via the USB and easy ribbon exchange. peripheral interface. All peripherals are Straightforward adjustment connected to the printer in seconds using For exchanging wear parts and The printhead is pressed down with two two pins and fixed in place with a screw. connecting peripherals, the Allen key is Solid metal housing located ready to hand at the printer. sliding toggles. One is mounted to the left 6 Made of die-cast aluminum. label margin, the other one is pushed to All components are mounted on it. the right label margin. 4 Peripheral connection Peel-off option 7 Roll holder The label is removed from its liner via Available for core diameters from 38 mm. a peel-off plate. A high printing and (We provide adapters for core diamters dispensing accuracy can be achieved wider than 76 mm for improved label with the additionally powered rewind winding). The spring-mounted margin stop assist roller and the pinch roller. ensures constant tension during feeding, thus ensuring a highly precise imprint. cab | 2 liners with or without paper core. 9 Only one tool for all maintenance tasks All required interfaces. 1 RS232C interface. 2 USB 2.0 slave interface. 3 Ethernet 10 / 100 Base T interface with TCP / IP. 4 Slot for wireless LAN card. 5 Two USB Master interfaces for connecting an external operation 4 panel, keyboard, scanner or service key. 6 Slot for CompactFlash Type I memory card. Options 6 › Centronics bi-directional interface acc. to IEEE 1284. RS422/RS485 interface 1,200 up to 230,400 Baud/8 Bit. The interfaces are plugged into the PC. 3 Connection to the printer via mini USB connection cable. 5 2 › Label selection – I / O box. Up to 16 different labels can be loaded via PLC from a 1 memory card. Operation of four inputs/outputs via Basic Interpreter. › cab WLAN card 802.11 b / g. Stand-alone operation. Accessories for stand-alone operation Printing with a cab printer without a PC. Memory card The layout of the labels is created either using label software or CompactFlash Type I formats, fonts and graphic data, serial data and database contents Compact keyboard are saved or imported on the CF memory card, USB flash drive or the Connection: USB, number of keys: 86 internal IFFS printer memory. L x W mm: 282 x 132 Cherry G84-4100 through direct programming via a text editor on the PC. Label Only variable data is sent to the printer via keyboard or host computer before being printed out. Data from a barcode scanner or a balance Device functionality and compliance with CE standards can also be received by the printer. are only warranted by using the accessories provided or recommended by cab. cab | 3 Software tools. Direct programming with J-Script The printer language is easy to understand and simple to integrate into your host system. Variable data is linked with host applications. Label design, graphic data and fonts are recorded on the CompactFlash card. The host computer sends only variable data to the printer. J H 100 OR S l1;0,0,68,70,100 T 10, 10,0,5,pt20;sample B 10,20,0,EAN-13,SC2,401234512345 G 8,3.5,0;R:30,9,0.3;0.3 A1 Job start Speed (100 mm / s) Orientation rotated by 180° Size of label (100x68 mm, gap 2 mm) Text object/font: Swiss bold, 20 pt Barcode EAN 13, size SC 2 Graphic, box 30 x 9 mm, Line strength 0.3 mm Number of labels (in this example 1) Integration into SAP R/3 * In cooperation with SAP, cab developed the “replace method” for controlling cab printers quickly and easily from SAP R/3 using SAPScript. As a Silver Level partner in SAP‘s Printer Vendor Program, cab has access to the SAP development area for optimum printer support in SAP environments. * SAP and R/3 are registered trademarks of SAP AG. abc – Basic Compiler As an integrated element of the firmware, the Basic Compiler enables the printer to process data via BASIC programming before it is sent for print editing. This makes it possible for external printer languages to be replaced or data from other systems, e.g. a PLC or balance, to be transferred so information can be printed in different label formats. Example of use: Connection to a balance Database Connector In stand-alone mode with additional network connection, the Database Connector enables stand-alone printers to access data directly from a central SQL-compatible database and to print it as a label. Data can also be written back to the database or changed during the printing process. Printer monitoring with Intranet and Internet Using standard programs such as the web browser or FTP clients, the integrated HTTP and FTP server enables print monitoring, configuration, firmware updates and memory card administration. Status, warning and error messages are sent to administrators or users as e-mails or SNMP datagrams via SNMP and SMTP clients. A time server is used to synchronize the time and date. Administration Network Manager The cab Network Manager enables the user to control multiple printers across a network simultaneously. It supports monitoring, configuration, firmware updates, memory card administration, file synchroniza tion and PIN administration centrally. cab | 4 Create Transfer labels with replace file software into SAPScript Exchange of variable data with SAPScript and printout WHQL-certified Windows printer driver for Windows XP Windows Server 2003 Windows Vista Windows Server 2008 Windows 7 Windows Server 2008 R2 Our printer drivers are officially certified and signed by Microsoft. They ensure optimum stability on your Windows operating system. The programs Word, Excel, Access, Corel Draw, etc. can be used to design and print labels. Apple-Mac OS X® driver Alternatively, cab offers a CUPS-based printer driver for Mac OS X. Linux driver Alternatively, cab offers a CUPS-based printer driver for Linux. Microsoft® is a registered trademark of Microsoft Corporation. Mac OS® is a registered trademark of Apple Computer, Inc Label software. cablabel R2+ A powerful label software that is available free of charge and specially designed for cab printers and print & apply systems. Different fonts, barcodes and graphics in variable heights, widths and printing directions can be used to produce the best possible label design. In addition to the loadable TrueType fonts available with MS Windows, cab printers also offer a large number of internal bitmap and vector fonts. Thanks to the support of the most commonly used codepages, cablabel R2+ is available in 24 different languages for country-specific special characters can also be printed. the following operating systems: Windows XP Windows Server 2003 * High-performance functions make it possible to design and print even complex labels in just a few minutes. cablabel R2+ supports Windows Vista Windows Server 2008 * Windows 7 * Terminalserver / Citrix are not supported. special functions of the cab printers, such as real-time clock, printer counter, stand-alone operation without PC, circular fonts or the Additional label software printout of the printer data stream in a file. The MDI technology makes Highest possible variability – other commercially available label soft- it possible to open several labels at the same time and to move ware solutions, such as Codesoft, Nicelabel, Easylabel, Bartender, objects from one label to another. Label Matrix or Labelview, support the cab label printers and labeling systems. More information is available on our website. cab | 5 Technical data. Standard Label printer Printhead Material Ribbon Internal rewinder (only peel-off version) Printer dimensions Label sensor Electronics Interfaces Operation data 1) 2) Print method Thermal transfer Thermal direct Print resolution dpi Print speed up to mm / s Print width mm Labels, continuous rolls or fan-folded Material thickness mm / weight g / m2 Label width1) mm Width of liner or continuous material mm Heat shrink tube mm Label height1) without back-feed from mm when dispensing1) from mm up to mm Media roll Total diameter up to mm Core diameter mm Winding direction Ink Roll diameter up to mm Core diameter mm Ribbon length variable up to m Width2) up to mm Total diameter up to bis mm Core diameter mm Winding direction Height x Depth mm Width mm Weight kg Gap sensor Reflective sensor from the bottom / from the top Distance to locating edge mm Processor high speed 32 Bit ColdFire / clock rate MHz RAM MB Memory IFFS MB Flash Slot for CompactFlash Type I memory card Slot for wireless LAN card Battery buffer for Warning signal Centronics bi-directional acc. to IEEE 1284 RS232 C 1,200 up to 230,400 Baud / 8 Bit USB 2.0 high speed slave for PC connection Ethernet 10 / 100 Base T, LPD, RawIP printing, ftp printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP RS422, RS485 1,200 up to 230,400 Baud / 8 Bit Peripheral connection WLAN card 802.11 b / g WEP / WPA PSK (TKIP) 2x USB master for Power supply Power consumption Temperature / humidity: Operation Storage Transport Approvals A4+ 203 300 600 250 250 100 104 105.6 105.6 Paper, cardboard, textiles, synthetics such as PET, PE, PP, PVC, PU, acrylate, PI 0.05 – 0.8 / 60 – 300 20 – 116 25 – 120 25 – 110 4 12 5000 4000 1000 205 38 – 100 Outside or inside Outside or inside 80 25 500 114 142 38.1 Only outside 274 x 446 242 9 For leading edge of the label or punching marks and end of material For printing marks 5 – 53 266 64 8 Real-time clock, printout of time and date, data storage on shut-down Acoustic signal in case of error External operation panel, keyboard, scanner, service key, USB flash drive 100 – 240 V ~ 50 / 60 Hz, PFC Max. 300 W +5 – 40°C / 10 – 85% not condensing +0 – 60°C / 20 – 85% not condensing -25 – 60°C / 20 – 85% not condensing CE, FCC class A, CB, CCC, UL Limitations may apply to small labels, thin materials or strong adhesives. Critical materials or applications must be tested and approved. The ribbon should be roughly the same width as the label in order to avoid folding. With innovative technology for better climate protection Energy saving – Environmentally friendly cab | 6 Option Standard Label printer Operation panel Buttons / LED display LCD graphic display Settings Monitoring Stop printing if: On the display Test routines System diagnosis Short status, status print Status reports Fonts Font types Character sets Bitmap fonts Vector / TrueType fonts Graphics Barcodes Font formats Font width Graphic elements Graphic formats Linear barcodes 2D codes Software Programming System diagnosis / administration Label software Windows driver certified Mac driver Linux driver Stand-alone operation Option Authorized distribution by resellers A4+ Pause, Feed, Cancel, Menu, Enter, 4 x Cursor Width 60 mm, height 40 mm, text 4 lines, ca. 20 characters per line Time, date, digital or analog clock 25 language settings System settings, print parameters, interfaces, security End of ribbon End of labels Printhead open Data reception Used memory Clock Input buffer WLAN field intensity Temperature of printhead Date sheet Remaining quantity of ribbon Ethernet status Access to memory card abc Debug When switched on, incl. printhead testing Font list, device list, WLAN status, label profile, test grid, monitor mode, PPP status Extensive status printout with information about settings, e.g. print length counter, runtime counter, etc. Request of machine status via software commands. Detailed status messages on the display, e.g. network error – no link, barcode error, etc. 5 Bitmap fonts incl. OCR-A, OCR-B and 3 Vector fonts Swiss 721, Swiss 721 Bold and Monospace 821 available internally, loadable TrueType fonts. Thai and Chinese (simplified Chinese) available as options. Windows 1250 up to 1257, DOS 437, 737, 775, 850, 852, 857, 862, 864, 866, 869, EBC DIC 500, ISO 8859-1 to -10 and -13 up to -16, WinOEM 720, UTF-8, Macintosh Roman, DEC MCS, K0I8-R. All West and East European Latin, Cyrillic, Greek, Hebrew and Arabic characters are supported. Thai and Chinese available as options. Size of width and height 1 – 3 mm Zoom 2 – 10 Orientation 0°, 90°, 180°, 270° Size of width and height 0.9 – 128 mm Variable zoom, Orientation 360° in steps of 1° Bold, italic, underlined, outline, negative, gray, vertical, depending on character fonts Variable Line, arrow, box, circle, ellipse, filled and filled with fading PCX, IMG, BMP, TIF, MAC, GIF, PNG Code 39, Code 93 Interleaved 2 / 5 Code 39 Full ASCII Ident- and lead code of Deutsche Post AG Code 128 A, B, C Codabar EAN 8, 13 JAN 8, 13 EAN / UCC 128 MSI EAN / UPC Appendix 2 Plessey EAN / UPC Appendix 5 Postnet FIM RSS 14 HIBC UPC A, E, E0 Aztec, Codablock F, Data Matrix, PDF 417, Micro PDF 417, UPS Maxicode, QR-Code, RSS 14 truncated, limited, stacked and stacked omnidirectional, EAN-Datamatrix, GS1 Data Bar All codes variable in height, module width and ratio. Orientation 0°, 90°, 180°, 270°. Optionally with check digit, printed characters and start/stop code, depending on code type. J-Script direct programming abc – Basic Compiler Database Connector Printer monitoring Network Manager cablabel R2+ Codesoft, NiceLabel, Easylabel Bartender, Label Matrix, Labelview 32 / 64 bit for Windows XP Server 2003 Windows Vista Server 2008 Windows 7 Server 2008 R2 OS X printer driver from version 10.4 Tested with Suse 9.0, CUPS-based For current data, please go to www.cab.de cab | 7 Accessories for basic devices. Cutter The cutter is used to cut paper, pressure sensitive labels, cardboard, textiles, synthetics or heat shrink tubes. Material width up to mm Weight of material gr / m2 / cardboard Material thickness mm Cutting length mm Gap height up to mm Cuts / min Stop print job if Cutter CU4 120 60 – 500 0.05 – 0.8 >5 2.5 120 Final position not reached Rewind guide plate for internal rewinding The dispensing printer takes care of internal rewinding. The peel-off plate is replaced by the rewind guide plate (for devices A2+ and A4+). ER1 / 2 / 3 external rewinder for direct printer connection The rewinder is screwed directly onto the printer. Labels can be wound either inside or outside. Electronic control of the swing arm ensures smooth and tight winding. ER4 / 6 / 8 external rewinder with built-in power supply The rewinder can be attached to almost any third-party printer. All other technical data is the same as for the rewinder ER1 / 2 / 3. EU4 / 6 / 8 external unwinder It enables smooth label feed for heavy rolls. The unwinder works both with inside and outside wound labels. Tester for linear barcodes The built-in scanner tests horizontally printed barcodes directly after printing. If the barcode cannot be read, the printing process can be stopped at once so the faulty labels can be removed. It is primarily intended for use with the ER4 – ER8 external rewinder or in dispens ing mode. Hand or foot switch for printing on demand (see page 9). Material width up to mm Roll Ø max. mm Core Ø mm Operating voltage Label winding cab | 8 ER1 / 210 120 205 40 / 76 From label printer External rewinder ER4 / 210 ER4 / 300 120 120 205 300 40 / 76 40 / 76 100 – 240 V ~ 50 / 60 Hz Outside or inside External unwinder EU4 / 300 120 300 40 / 76 – Accessories for dispensing devices. 1 Present sensor or pause adapter An additional present sensor or peel-off adapter is needed to dispense labels. cab offers devices for both manual and automatic operation. Extended peelbar (only for PS5 present adapter). If labels are difficult to remove from the liner, a peel-off plate with rewind guide plate, extended by 10 mm, is used. PS8 present sensor for manual operation The sensor detects that the label is in dispensing position and pauses the print process. Once the label has been removed manually, the next one is 1 printed automatically. PS5 present adapter for automatic operation Printing and dispensing of the label is triggered by Printing and dispensing on demand an external signal. The label is removed by a robot A hand or foot switch can be connected to the PS6 present or an applicator. sensor to start print jobs. Inputs: Start, label removed, external error Outputs:No print job, printer not ready, print started, label in dispensing position. Hand switch Starts printing and dispensing. PS6 present sensor for manual or automatic operation 1.As with PS8, once the label has been removed, the next one is printed automatically. 2.Dispensing on demand with hand or foot switch Foot switch Starts printing and dispensing. or an external signal (as with PS5). PS9 extended present sensor for manual operation For dispensing labels whose front edge is not Sub D plug for PS5, PS6 and PS7 detected by the PS8 present sensor. The extension To connect external control signals for auto can be customized matic operation. Sub D plug 15-pin with screw clamps. PS7 pause adapter for basic and dispensing devices The print job is stopped by the pause signal. External panel The label being printed is finished first, e.g. by using If the panel is no longer accessible, e.g. after a label loop. installation within a facility, an external panel Inputs: Pause, external error can be installed. There are additional slots Outputs:No print job, for a CF memory card Type I and a USB printer not ready, master interface. print job active cab | 9 Applicator A1000. Real-time application In conjunction with the A2+, A4+ and A6+ printers, the A1000 applicator represents a cost-effective solution for both semiautomatic operation and for integration into automated production lines. 1 Long service life The ball-bearing guide bars are 1 low-wearing. 2 Variable product heights 2 The lift cylinder allows labeling at different heights. It is available in different stroke lengths. 3 Easy adjustment The tamp pad can be adjusted in alignment with the peel-off plate using four screws. Processing control is optimized during testing using the operation panel. 4 Pre-dispense button 3 Tests the labeling function. Pushing the button the first time causes the label to be printed and held by the pad. Pushing the button again starts the applica- 4 tion. 5 Compressed air regulation unit The microfilters prevent contamination and the compressed air regulator ensures the labeling quality. 6 5 6 7 High process reliability The supporting air jet stream, induction air and lifting speed can be adjusted. The pressure can be reduced to less than 1 kg for highly sensitive products and packaging. To avoid contamination of the vacuum holes, they are cleaned with air pressure after each application. 7 Real-time application Labels with a height of 25 – 200 mm and a width of 25 – 176 mm can be dispensed. cab | 10 Label transfer Label width mm Label height mm Cylinder stroke mm Tamp stroke below the device mm Compressed air bar Product surface Product heightvariable fixed Productin rest in motion Tamp 25 – 176 25 – 200 – – Roll-on 25 – 176 80 – 200 220 / 300 70 / 150 4–5 Flat – – Blow 25 – 176 25 – 100 – Accessories for applicators. Tamp pad The product remains fixed in place during application. The vacuum holes of the universal tamp pads are covered by a foil that is pierced according to the label size. The tamp pads are adjusted to the external dimensions of the labels. Blow pad The label can be blown on for pressure-sensitive products. The labels can be applied to either a fixed or moving product. The product to be printed is positioned approximately 10 mm below the blow pad. Roll-on pad The label is moved under the roll during application. The pad moves onto the product and the label is rolled on during transportation. Digital I/O interface at the applicator The master (e.g. PLC) starts or stops the labeling process. Status and error messages are issued at the same time. Input / output › Start › Printer not ready › Basic position reached › Stop › No print job › Labeling position reached › Print first label › Combined alarm › Labeling error Printing and dispensing on demand A hand or foot switch or a product sensor can be attached at the To connect external control signals applicator‘s digital I/O interface to start print jobs. Sub D plug at the applicator. Sub D plug 15-pin with screw clamps. Hand switch Starts printing and dispensing. External operation panel If the external panel is no longer accessible, e.g. after installation within a facility, an Foot switch external panel can be installed. There are Starts printing and dispensing. additional slots for a CF Type I memory card Product sensor and a USB master interface. For automatic product detection on the conveyor belt. cab | 11 Accessories for applicators. 1 Base frame The base frame is customized according to the width and height requirements. The labeling system is fixed in place with two pins. The exact position can be adjusted on the crossbar. 2 Roll-on application For labeling round products with diameters 12 up to 40 mm. The product is pushed onto the rolls. The labeling process is started by pressing the hand or foot switch. 3 Dispensing module for roll-on application 1 4 2 5 For labeling packaging on the conveyor belt. The conveyor speed must be synchronized with the print speed. It is suitable for labels with a width up to 116 mm and a length up to 200 mm. Further technical details can be provided on request. 4 Stand + The stand enables the printer to be in5 tegrated quickly and flexibly into any manufacturing line. The height and width of the labeling position can be adjusted with ease. Four guide rollers on the chassis ensure mobility. The stand is adjusted at the place of installation using adjustable feet. Stand Total height mm Height of appliance mm Projection until middle of label mm Chassis Width x Depth x Height mm Printer holder for A4+ and A6+, A2+ on request 1,600 1,400 230 – 500 600 x 860 x 140 3 cab | 12 Delivery program label printer. Part no. Hardware dpi Part no. Accessories 5954500 5954505 Label printer A4+ Label printer A4+ 200 200P 5954012.001 Metal cover for A4+ 5954501 5954506 Label printer A4+ Label printer A4+ 300 300P 5954502 5954507 Label printer A4+ Label printer A4+ 600 600P 5948000 Cutter CU4 Printer with metal cover for A4+ 5946995.001 Cutter tray 4 59545xx.101 5541311 Stacker with cutter ST4/L 5959622 Adapter 100 55xxxxx Storage table ST4/L, label B x H 5958932 Base frame A4 5946244.001 Tear-off plate TP4 5954190.001 Rewind guide plate RG4 for internal rewinding 5570820 Barcode tester hl40-4 5948102 External rewinder ER1 / 210 5948100 5946090 External rewinder ER4 / 210 External rewinder ER4 / 300 5946091 External unwinder EU4 / 300 5948170 Connection set for ER / EU 5946120 Peel-off adapter PS5 automatic operation 5942353 Present sensor PS6 manual / automatic operation 5946146 Pause adapter PS7 5946900 Present sensor PS8 manual operation on request Present sensor PS9 5948830 Extended operation panel 595xxxx Label printer for thermal direct printing on request Scope of delivery: Label printer, Power cable Type E+F, length 1,8 m Connecting cable USB, length 1,8 m Operation manual de / en DVD: Operating manual in 21 languages, Configuration manual de / en / fr, Service manual de / en, Spare part list de / en, Programming manual en, Windows printer driver 32 / 64 bit in 19 languages for Windows XP Server 2003 Windows Vista Server 2008 Windows 7 Server 2008 R2 MAC OS X driver de / en / fr, Linux driver de / en / fr, Label software cablabel R2+ in 24 languages, Database Connector en Part no. Consumables 5954081.001 5954072.001 5954077.001 Printhead 4 / 203 Printhead 4 / 300 Printhead 4 / 600 5954180.001 5954183.001 Print roller DR4 Rewind assist roller RR4 cab | 13 Delivery program for accessories. Part no. Accessories Part no. Accessories applicators 5954380.001 External operation panel 5533240 Testbox 2 Automatic operation 5901630 Compact keyboard USB Cherry G84-4100 5942345 Present trigger TR1 5561043 Memory card CompactFlash Type I 5535901 Foot switch Part no. Applicators with Accessories 5941526 Photo cell to start 5949001 5949002 5949003 Applicator A 1000-220 Applicator A 1000-300 Applicator A 1000-400 5917652 Interface connector SUB-D-plug 15 pole Phoenix Contact 2761606 5949072 Universal tamp pad A1021 70 x 60 5949093 5xxxxxx Base frame 340 x 160 Base frame B x H 5949075 Universal tamp pad A1021 90 x 90 5xxxxxx Tamp pad A1021 B x H 5947400 Stand 1600 5949076 Universal tamp pad A1321 116 x 102 8913693 Printer holder 5949077 Universal tamp pad A1321 116 x 152 Part no. Interfaces 5xxxxxx Tamp pad A1321 B x H 5954200 5954201 Centronics interface RS422 / RS485 interface 5xxxxxx Blow pad A2021 B x H 5954191 Label selection – I / O-Box 5xxxxxx Roll-on pad 5561041 WLAN-card 802.11 b / g Part no. Connecting cable 5550818 Cable RS232 C 9 / 9-pin, length 3 m 5918008 Patch cable KAT 5e, 3 m gray Part no. Software DL 40100 Database Connector license 5580215 Administration Network Manager In scope of delivery Label software cablabel R2+ on request Codesoft, Nice Label, Easylabel 9008486 Programming manual English, printed copy on request on request cab | 14 Roll-on application for cylindrical products Demand module The cab delivery program. EOS 1/4 label printer MACH4 label printer A+ series label printers XD4 label printer XC6 label printer Hermes+ Print and Apply PX series print module FL series laser marking systems Laser safety housing Label software VS 120 label dispenser Labels / ribbons cab | 15 Edition 8.0 Headquarters in Germany cab subsidiaries 350 distribution partners in more than 80 countries. cab is represented in every active commercial center - worldwide. www.cab.de Germany France South Africa Asia cab Produkttechnik cab technologies s.a.r.l. cab Technology (Pty.) Ltd. cab Technology Co, Ltd. GmbH & Co KG 67350 Niedermodern 2125 Randburg Postfach 1904 Téléphone +33 388 722 501 Phone +27 11-886-3580 Junghe, Taipei, Taiwan 76007 Karlsruhe www.cab.de/fr www.cab.de/za Phone +886 2 8227 3966 Wilhelm-Schickard-Str. 14 email@example.com firstname.lastname@example.org www.cab.de/tw 76131 Karlsruhe email@example.com Telefon +49 721 6626-0 Telefax +49 721 6626-249 USA China www.cab.de cab Technology Inc. cab (Shanghai) Trading Co., Ltd firstname.lastname@example.org Tyngsboro MA, 01879 Representatives in other countries on request. Phone +1 978 649 0293 Phone +86 21 6236-3161 www.cab.de/us www.cab.de/cn email@example.com firstname.lastname@example.org This documentation and any translations hereof are the property of cab GmbH & Co KG. The replication, processing, reproduction or distribution in whole or in parts requires our prior written consent. © Copyright by cab All delivery, design and technical specifications are compiled to the best of our current knowledge and are subject to change without prior notice.