Samsung | P10 | Instruction manual | Samsung P10 Instruction manual

1p~30p(P10)-GB
2/1/05 10:44 AM
Page 3
DIGITAL HOME
CINEMA SYSTEM
HT-P10
Instruction Manual
COMPACT
VIDEO
Downloaded From TheatreSystem-Manual.com Manuals
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
1
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 5
Precautions
GB
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD
player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 6
Features
Multi-Disc Playback & FM Tuner
The HT-P10 combines the convenience of multi-disc playback capability,
including DVD, VCD, CD, MP3-CD, CD-R/RW, and DVD-R/RW, with a
sophisticated FM tuner, all in a single player.
Dolby Pro Logic II
Dolby Pro Logic II is a new form of multi-channel audio signal decoding technology
that improves upon existing Dolby Pro Logic.
DTS (Digital Theater Systems)
DTS is an audio compression format developed by Digital Theater
Systems Inc. It delivers full-frequency 5.1 channel sound.
TV Screen Saver Function
The HT-P10 automatically brightens and darkens the brightness of the
TV screen after 3 minutes in the stop mode.
The HT-P10 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The HT-P10 automatically shuts itself off after 20 minutes in the stop mode.
Customized TV Screen Display
The HT-P10 allows you to select your favorite image during JPEG, DVD
or VCD playback and set it as your background wallpaper.
3
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 7
Contents
GB
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Connecting the Speakers ...................................................................................................................................................11
Connecting the Video Out to TV.........................................................................................................................................13
P.SCAN(Progressive Scan) Function .................................................................................................................................14
Connecting External Component........................................................................................................................................15
Connecting the FM Antenna ...............................................................................................................................................16
OPERATION
Disc Playback .....................................................................................................................................................................17
MP3-CD Playback ..............................................................................................................................................................18
DivX Playback.....................................................................................................................................................................19
JPEG File Playback ............................................................................................................................................................21
Displaying Disc Information ................................................................................................................................................22
Fast/Slow Playback ............................................................................................................................................................23
Skipping Scenes/Songs......................................................................................................................................................23
Repeat Playback.................................................................................................................................................................24
A-B Repeat Playback..........................................................................................................................................................25
Step Function......................................................................................................................................................................26
Angle Function....................................................................................................................................................................26
Zoom (Screen Enlarge) Function .......................................................................................................................................27
EZ VIEW Function ..............................................................................................................................................................27
Selecting Audio/Subtitle Language .....................................................................................................................................28
Moving Directly to a Scene/Song .......................................................................................................................................29
Using Disc Menu.................................................................................................................................................................30
Using the Title Menu...........................................................................................................................................................30
SETUP
Setting the Language..........................................................................................................................................................31
Setting TV Screen type.......................................................................................................................................................33
Setting Parental Controls (Rating Level) ............................................................................................................................35
Setting the Password..........................................................................................................................................................36
Setting the Wallpaper .........................................................................................................................................................37
Setting the Speaker Mode ..................................................................................................................................................39
Setting the Test Tone ..........................................................................................................................................................40
Setting the Delay Time .......................................................................................................................................................41
Setting the Audio Quality ....................................................................................................................................................43
Setting the DRC (Dynamic Range Compression) ..............................................................................................................45
AV SYNC Setup..................................................................................................................................................................46
Dolby Pro Logic II Mode .....................................................................................................................................................47
Dolby Pro Logic II Effect .....................................................................................................................................................48
Sound Field (DSP)/EQ Function.........................................................................................................................................49
Sleep Timer Function..........................................................................................................................................................50
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................51
Presetting Stations..............................................................................................................................................................52
About RDS broadcasting ....................................................................................................................................................53
About RDS broadcasting ....................................................................................................................................................54
MISCELLANEOUS
Adjusting Display Brightness ..............................................................................................................................................55
Mute Function .....................................................................................................................................................................55
Cautions on Handling and Storing Discs............................................................................................................................56
Before Calling for Service...................................................................................................................................................57
Language Code List............................................................................................................................................................59
Specifications......................................................................................................................................................................60
4
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 8
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
Audio + Video
DVD
8cm
COMPACT
Audio + Video
VIDEO-CD
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
DIGITAL AUDIO
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
• DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
5
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 9
GB
PREPARATION
Disc Recording Format
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R disk over 700MB/80 minute as much as possible since it may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you
may not be able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 10
Description
—Front Panel—
Stop (
Power (
) button
Function button
Open/Close button
) button
Play/Pause (
Disc Tray
) button
Volume buttons
Standby indicator
Tuning Up & Skip (
) buttons
Tuning Down & Skip (
) buttons
P.SCAN indicator
DOLBY DIGITAL indicator
DTS Disc indicator
REPEAT indicator
LINEAR PCM indicator
TITLE indicator
PBC indicator
TUNER indicator
GROUP indicator
CHAPTER indicator
TRACK indicator
PROGRAM indicator
DSP indicator
MPEG indicator
DVD AUDIO indicator
PRO LOGIC indicator
7
Downloaded From TheatreSystem-Manual.com Manuals
System Status Display
STEREO indicator
RTA indicator
RDS indicator
RADIO FREQUENCY
indicator
SPEAKER indicator
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 11
GB
COMPONENT VIDEO OUTPUT jacks
External Audio Component Connect a TV with component video inputs to these jacks.
Input Connector
FM Antenna Connector
5.1 Channel Speaker
Output Terminals
SCART JACK
Cooling Fan
Connect to a TV with scart input jack.
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
Accessories
Remote Control
Video Cable
FM Antenna
User's Manual
8
Downloaded From TheatreSystem-Manual.com Manuals
PREPARATION
—Rear Panel—
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 12
Description
—Remote Control—
TV, DVD POWER button
TUNER MEMORY, P.SCAN button
SLEEP button
RDS Selection button
OPEN/CLOSE button
DIMMER button
DVD button
AUX button
TUNER button
Number(0~9) buttons
REMAIN button
CANCEL button
VIDEO SEL. button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
PL II MODE button
VOLUME button
MENU button
SUB TITLE button
PL II EFFECT button
TUNING/CH button
INFO. button
AUDIO button
Cursor/Enter button
RETURN button
STEP button
ZOOM button
REPEAT button
SLOW, MO/ST button
LOGO COPY button
9
Downloaded From TheatreSystem-Manual.com Manuals
MUTE button
TEST TONE button
SOUND EDIT button
DSP/EQ button
DIGEST button
EZ VIEW, NTSC/PAL button
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 13
GB
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back
of the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also
be operated at a horizontal angle of up to 30° from the remote control sensor.
10
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 14
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
L
SW
R
LS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Center Speaker C
• It is best to install it at the same height as the front
speakers.
• You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
11
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 15
GB
Center Speaker
Rear Speaker (L)
Front Speaker (L)
CONNECTIONS
Rear Speaker (R)
Subwoofer
1
Press and hold the terminal tab.
2
3
Insert the speaker cord.
Release the finger.
Note
Front Speaker (R)
1
2
Red
3
Black
• Connect the red cord to the red (+) terminal and the black cord to the black (-)
terminal.
12
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 16
Connecting the Video Out to TV
Choose one of the three methods for connecting to a TV.
METHOD 2
METHOD 3
METHOD 1
METHOD 1 Composite Video ............... Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 2 Scart ............... Better Quality
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
• "COMPOSITE" or "RGB" will appear in the display.
At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".
• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.
METHOD 3 Component (Progressive Scan) Video ............... Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Note
• When the Progressive scan mode is selected, the VIDEO and SCART outputs
do not feed any signal.
13
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 17
P.SCAN(Progressive Scan) Function
GB
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire
picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines
displayed in one pass) to create a clear and detailed picture without visible scan lines.
1
Press STOP button.
• When disc is played back, press the STOP button twice so that “STOP”, appears on the display.
2
Press and hold P.SCAN button on the remote control for over 5 seconds.
• Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan"
CONNECTIONS
•
repetitively.
When you select P.SCAN, "P.SCAN" will appear on the display
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two interlaced fields (odd and even), where each field contains
every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/30th of a second, contains
two interfaced fields, thus a total of 60 fields are displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.
Note
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
14
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 18
Connecting External Component
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
1
Connect Audio In on the DVD player to Audio Out on the external analog component.
2
Press AUX on the remote control to select AUX.
• Be sure to match connector colors.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ AUX ➝ FM.
15
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 19
Connecting the FM Antenna
GB
CONNECTIONS
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2. Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
16
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 20
Disc Playback
1
Press OPEN/
CLOSE button to
open the disc tray.
2
Load a disc.
3
• Place a disc gently into the
tray with the disc’s label
facing up.
Press OPEN/
CLOSE button to
close the disc tray.
DVD
VCD
CD
• Playback starts automatically.
Note
• Depending on the content of the disc, the initial screen may appear different.
To stop playback, press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE (
) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
) button again.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
• By default, the video format is set to "PAL".
• "NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
Each country has a different video format standard.
•
• For normal playback, the video format of the disc must be the same as the video format of your TV.
17
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 21
MP3-CD Playback
GB
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
MP3
1
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
2
In Stop mode, use
to select
the album, and then
press the ENTER
button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear and
playback will start.
• The appearance of the menu depends on
the MP3 disc.
OPERATION
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
•
recorded on the disc.
MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS ,
SAMPLEING FREQ.: 32K/44.1K/48KHz)
18
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 22
DivX Playback
Skip Forward/Back
During playback, press the
button.
• Go to the next file whenever you press
•
button, if there are over
2 files in the disk.
Go to the previous file whenever you press
2 files in the disk.
button, if there are over
Fast playback
To play back the disc at a faster speed,
press and hold
or
during playback.
• Each time you press and hold either button, the playback speed will
change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
5 Minute Skip function
During playback, press the
,
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
button.
button.
Zoom Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
• DIVX file can be zoomed only in ZOOM X2 mode.
19
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 23
GB
Subtitle Display
Press the SUBTITLE button.
• Each time you press the button, your selection will toggle between “SUBTITLE ON” (1/1, 1/2 ...) and
“SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
Audio Display
Press the AUDIO button.
• Each time you press the button, your selection will toggle between “AUDIO ON” (1/1, 1/2 ...) and
Note
•"
“
”.
" is displayed when there is one supported audio item in the disc.
DivX is a video file format developed by Microsoft based on the MPEG4 so as to provide audio, and
video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
in DVD-quality video and audio.
1. Supported Formats
• This product only provides the following media formats. If both of the video and audio formats are not
supported simultaneously, the user may experience problems such as broken image or no sound.
●
Supported Video Formats
Format
Surpported Versions
●
AVI
DivX3.11 ~ 5.1
WMA
V1/V2/V3/V7
Supported Audio Format
Format
Bit Rate
Sampling Frequency
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
DTS
N/A
N/A
• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). It will not be supported when the screen resolution is higher than 800.
2. Caption Related
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
•
media file (*.avi) within the same folder.
Example. Root
Samsung_Bluetek_007CD1.avi
Samsung_Bluetek_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name.
20
Downloaded From TheatreSystem-Manual.com Manuals
OPERATION
DivX(Digital internet video eXpress)
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 24
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this DVD player.
Press the OPEN/CLOSE button to open the
disc tray, and then load the JPEG disc.
• Playback will start automatically and each image will show
for 5 seconds before moving to the next image.
To rotate the image
During playback, press Cursor
, , ,
buttons.
Rotate vertically
Rotate 90° counterclockwise
Rotate horizontally
Rotate 90° clockwise
21
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 25
Displaying Disc Information
GB
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
VCD
CD
MP3
DivX
JPEG
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
The information display
disappears from the screen
•
The information display
disappears from the screen
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
Note
• Depending on the disc, the disc information display may appear
•
different.
Depending on the disc, you can also select DTS, DOLBY
DIGITAL, or PRO LOGIC.
Screen Display
DVD display
DivX display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
VCD display
MP3 CD display
ELAPSED TIME display
SUBTITLE display
ANGLE display
CD display
TITLE display
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
DVD
TITLE ELAPSED
VCD
TRACK ELAPSED
TITLE REMAIN
CD
TRACK REMAIN
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
22
Downloaded From TheatreSystem-Manual.com Manuals
OPERATION
The information display
disappears from the screen
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 26
Fast/Slow Playback
Fast Playback
DVD
VCD
CD
Slow Playback
MP3
Press and hold
Press SLOW button.
.
• Each time the button is held down during playback,
the playback speed changes as follows:
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
VCD
DivX
Note
• Reverse slow playback does not
work with VCD and DivX.
Skipping Scenes/Songs
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track,
or directory (file) will be played.
• You cannot skip chapters consecutively.
VCD
DVD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• When watching a VCD with a track
23
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 27
Repeat Playback
GB
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVD
MP3
JPEG
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
VCD
TRACK
Repeatedly plays the selected track.
CD
DIR
Repeatedly plays all tracks in the selected
folder.
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
Note
To Select a Repeat Playback Mode in the Disc Information Screen
1
2
Press INFO button twice.
3
Press Cursor button
to select the desired
Repeat Playback mode.
4
Press ENTER button.
not possible with version 2.0
VCD discs if PBC is turned
on. To use Repeat Playback
on a VCD with PBC, you
should set the PBC to OFF in
the disc menu. (See page
30.)
DVD
Press Cursor button to
move to REPEAT
PLAYBACK ( ) display.
VCD
CD
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
Downloaded From TheatreSystem-Manual.com Manuals
• Repeat playback operation is
24
OPERATION
RANDOM
Plays tracks in random order.
(A track that has already been played may
be played again.)
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 28
A-B Repeat Playback
You can repetitively play back a designated section of a DVD.
DVD
1
VCD
CD
Press INFO button
twice.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
segment.
• For a VCD or CD, press INFO
button once.
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
• When ENTER button is pressed,
the selected position will be stored
in memory.
• The specified segment will be
played repeatedly.
A-
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
25
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 29
Step Function
DVD
GB
VCD
Press STEP button.
• The picture moves forward one frame each time the button is pressed
during playback.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed,
and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
Angle Function
DVD
This function allows you to view the same scene in different angles.
Press INFO button.
2
1/3
3
OPERATION
1
Press Cursor
button to move to
ANGLE ( ) display.
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
26
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 30
Zoom (Screen Enlarge) Function
This function allows you to enlarge a particular area of the displayed image.
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
EZ VIEW Function
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
27
Downloaded From TheatreSystem-Manual.com Manuals
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 31
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
2
Press INFO button
twice.
GB
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
Note
• You can use the AUDIO button on the remote control to
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
2
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
Note
EN 1/3
EN 01/ 03
SP 02/ 03
OFF
• You can use the SUBTITLE button on the
FR 03/ 03
OFF / 03
•
remote control to select a subtitle
language.
Depending on the disc, the Subtitle and
Audio Language functions may not work.
28
Downloaded From TheatreSystem-Manual.com Manuals
OPERATION
select a audio language.
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 32
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Moving to a Title/Track
Press INFO button.
01/05
001/040
0:00:37
1/1
Moving to a Chapter
4
Press Cursor ,
buttons or numeric buttons
to select the desired
chapter and then press
ENTER button.
01/05
MP3
025/040
0:00:01
2
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
1/1
Press Cursor ,
buttons to move to
time display.
01/05
025/040
1:17:30
3
Press Cursor ,
buttons to move to
Chapter ( ) display.
01/05
1/1
Moving to a Specific Time
5
Moving to a Chapter
001/040
0:00:01
1/1
Moving to a Specific Time
6
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
from the disc information screen.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
29
Downloaded From TheatreSystem-Manual.com Manuals
Note
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 33
Using Disc Menu
GB
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
1
In Stop mode,
press MENU
button.
• When playing a VCD (version
2.), this toggles between PBC
ON and OFF.
• When you select the disc menu that is not
3
Press Cursor ,
, buttons to
select the desired
item.
• Press ENTER button.
supported by the disc, the "This menu is not
supported" message appears on the screen.
PBC (Playback Control) Function
When playing a VCD (version 2.0), you can select and view various scenes according to the menu screen.
PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen. Some functions
may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, the availability of this feature may vary.
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
Press MENU button to exit the setup screen.
Downloaded From TheatreSystem-Manual.com Manuals
30
OPERATION
Note
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 32
Setting the Language
OSD (On-Screen Display) language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Note
• To select other language, select OTHER and enter the language code of your country.
(See 59 page for language code of countries)
AUDIO, SUB TITLE and DISC MENU language can be selected.
31
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 33
GB
3
Select ‘Language’
and then press
ENTER button
4
Press Cursor ,
button to select ‘OSD
Language’ and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
Press MENU button to exit the setup screen.
try.
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
32
Downloaded From TheatreSystem-Manual.com Manuals
SETUP
Press RETURN button to return to the previous level.
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 34
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the TV's aspect ratio.
1
In Stop mode,
press MENU
button.
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
33
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 35
GB
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a widescreen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• You can enjoy the widescreen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
4:3PS
(4:3 Pan&Scan)
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
Note
SETUP
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
34
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 36
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
3
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
1
In Stop mode,
press MENU
button.
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
Note
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
35
Press MENU button to exit the setup screen.
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 37
Setting the Password
GB
You can set the password for the Parental (rating level) setting.
1
3
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Press MENU button.
4
Press ENTER
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
Note
SETUP
• The setting is complete.
• The password is set to "7890" by default.
If you have forgotten the rating level password, do the following:
• While “NO DISC” message appears on the display of main unit, hold the main unit's
button for longer than 5
seconds. “INITIALIZE” appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
36
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 38
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
Press LOGO
button.
2
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will
turn off and then
back on.
• The selected wallpaper will be
displayed.
Note
• You can set up to three wallpapers by repeating operation
from Step1 to Step 3.
37
Select this to set the
Samsung Logo image as
your wallpaper.
Downloaded From TheatreSystem-Manual.com Manuals
Select this to set the desired
image as your wallpaper.
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 39
GB
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
In Stop mode,
press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
38
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 40
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
1
3
In Stop mode,
press MENU
button.
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
39
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 41
Setting the Test Tone
GB
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
Press RETURN button to return to the previous level.
SETUP
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
Downloaded From TheatreSystem-Manual.com Manuals
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
40
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 42
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
41
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 43
GB
3
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Downloaded From TheatreSystem-Manual.com Manuals
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
42
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 44
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 45
GB
When manually adjusting with the SOUND EDIT button
Method 2
Adjusting Front Speaker Balance
1
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
ST
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
TUNED
TITLE
CHAP PRGM RDS RT
ST
kHz
MHz
Adjusting Rear Speaker Level
TITLE
CHAP PRGM RDS RT
ST
TUNED
TITLE
kHz
MHz
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
Adjusting Subwoofer Speaker Level
5
TUNED
TITLE
Press SOUND
EDIT button and
then press Cursor
, .
CHAP PRGM RDS RT
kHz
MHz
ST
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
3
TUNED
kHz
MHz
Note
• The adjustments will appear on the main unit's display, not on your TV screen.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to –6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Downloaded From TheatreSystem-Manual.com Manuals
44
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 46
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
1
3
2
In Stop mode,
press MENU
button.
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.
4
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
Press Cursor
to adjust the
‘DRC’.
,
• The Cursor
button is pressed, the
greater the effect, and the Cursor
button is pressed, the smaller the effect.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 47
AV SYNC Setup
GB
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
1
Press the MENU button.
• Setup menu appears.
3
• AV-SYNC screen appears.
2
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
46
Downloaded From TheatreSystem-Manual.com Manuals
SETUP
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 48
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
• CINEMA: Adds realism to the movie soundtrack.
• PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
47
• MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the subwoofer only.
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 49
Dolby Pro Logic II Effect
GB
This function works only in Dolby Pro Logic MUSIC mode.
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 6.
SETUP
Note
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
48
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 50
Sound Field (DSP)/EQ Function
DSP(Digital Signal Processor) DSP modes have been designed to simulate different acoustic environments.
EQ: You can select from ROCK, POP, or CLASSIC, depending on the genre of music.
Press DSP/EQ button.
• "DSP" appears on the display panel.
• Each time the button is pressed, the selection changes as follows:
Note
• This feature works with CDs, MP3-CDs and 2 channel DVD-Audio
and Dolby Digital discs.
• When playing a DVD disc encoded with two or more channels,
multi-channel mode will be selected automatically and DSP/EQ
function does not work.
Note
49
POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK.
STUDIO : Provides a sense of presence as if in a studio.
CLUB : Simulates the sound of a dance club with a throbbing bass beat.
HALL : Provides a clear vocal as if listening in a concert hall.
MOVIE: Provides the feeling of a movie theater.
CHURCH: Gives the feel of being in a grand church.
PASS: Select this for normal listening.
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 51
Sleep Timer Function
GB
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• "SLEEP" will be displayed. Each time the button is pressed the preset
time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
SETUP
50
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 52
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual
tuning operation.
Remote Control Unit
1
Press TUNER
button.
• The selection toggles back and
2
Tune in to the
desired station.
Automatic Tuning 1
forth between "FM" each time
the TUNER button is pressed.
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
51
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 53
Presetting Stations
GB
You can store up to:
• FM
15 FM stations
Frequency Modulation
Example: Presetting FM 89.1 in the memory
1
Press the TUNER
button and select
the FM band.
• Each time the button is pressed,
2
• Refer to Step 2 on page 51 to
the band switches between
"FM".
TITLE
CHAP PRGM RDS RT
ST
Press the TUNER
MEMORY button.
• “PRGM” flashes in the display.
automatically or manually tune in
to a station.
TITLE
TUNED
RDS RT
ST
Press
to select preset
number.
• You can select between 1 and
TITLE
TUNED
5
RDS RT
ST
TUNED
kHz
MHz
kHz
MHz
kHz
MHz
4
3
Press
to
select "89.10".
Press the TUNER
MEMORY button
again.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
15.
RADIO OPERATION
• ‘PRGM’ disappears from the display and
the station is stored in memory.
TITLE
RDS RT
ST
TUNED
TITLE
CHAP
RDS RT
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
ST
TUNED
kHz
MHz
on the
52
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 54
About RDS broadcasting
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals.
For example,the stations send their station names,as well as information about what type of
program they broadcast, such as sports or music,etc.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
• Description on RDS function
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station
and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic
announcement is in progress.
Note
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
What information can RDS signals provide?
You can see the RDS signals the station sends on the display.
TO show the RDS signals
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information:
PS (Program Service) :While searching,"PS"appears and then the station names will be
displayed."NO PS" appears if no signal is sent.
RT(RadioText) : while searching,"RT"appears and then text messages the station sends
will be displayed. "NO RT"appears if no signal is sent.
Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case lrtters and always
uses upper case letters.
• The display window cannot show accented letters, “A,” for instance, may stans for
accented “A’s” like “À, Â, Ä, Á, Åand Ã.”
Note
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
53
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 55
GB
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
Before you start, remember...
•
•
•
•
The PTY Search is only applicable to preset
stations.
To stop searching any time during the process,
press PTY SEARCH while searching.
There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
1
2
Press the PTY-or PTY+until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
• The center unit searches 15 preset FM
stations,stops when it finds the one you
have selected, and tunes in that station.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
Program Type
• News including an announced opinion and
report
• Several matters including a current incident,
documentary, discussion and analysis.
• Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
• Sports
• Education
• Drama-Radio serial, etc.
CULTURE
• Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
SCIENCE
• Natural science and technology
VARIED
• Others-Speech, amusing program (quiz,
game), interview, comedy and satirical play,
etc.
POP M
• Pop music
ROCK M
• Rock music
M.O.R.M
• Current contemporary music considered to be
“easylistening.”
LIGHT M
• Light classical music- Classical music and
instrumental and chorus music
CLASSICS
• Heavy classical music-Orchestra music,
symphony, chamber music and opera
OTHER M
• Other music - Jazz, R&B country music
WEATHER
• Weather
FINANCE
• Finance
CHILDREN
• Children’s programmes
SOCIAL A
• Social affairs
RELIGION
• Religion
PHONE IN
• Phone in
TRAVEL
• Travel
LEISURE
• Leisure
JAZZ
• Jazz Music
COUNTRY
• Country Music
NATION M
• National Music
OLDIES
• Oldies Music
FOLK M
• Folk Music
DOCUMENT
RADIO OPERATION
3
Press PTY SEARCH while listenning to an
FM station.
Display
• Documentary
54
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 56
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press DIMMER button.
• Each time the button is press, the brightness changes as follows:
DARK ➞ BRIGHT.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
• ‘MUTE’ flash in the display.
• To switch the sound back on (at the same volume as before),
press MUTE again or the VOLUME buttons.
TITLE
CHAP PRGM RDS RT
ST
TUNED
kHz
MHz
55
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 57
Cautions on Handling and Storing Discs
GB
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
56
Downloaded From TheatreSystem-Manual.com Manuals
MISCELLANEOUS
Note
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 58
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or
if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer
or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
• Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
57
Downloaded From TheatreSystem-Manual.com Manuals
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1
•
CH Surround Sound is produced only if the disc is recorded with
5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 59
GB
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
The remote control does not • Is the remote control being operated within its operation range of
angle and distance?
work.
• Are the batteries exhausted?
Audio language and
subtitles do not work.
• Audio language and subtitles will not work for DVDs not containing
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
58
Downloaded From TheatreSystem-Manual.com Manuals
MISCELLANEOUS
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 60
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 31).
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1069
Bislama
1239
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
59
Downloaded From TheatreSystem-Manual.com Manuals
31P~60P(P10)-GB
2/1/05 10:45 AM
Page 61
Specifications
G
E
N
E
R
A
L
T
F U
N
M E
R
Power Consumption
70W
Weight
3.2Kg
Dimensions (W x H x D)
430 x 60 x 340 mm
Operating Temperature Range
+5°C~+35°C
Operating Humidity Range
10%~75%
Usable Sensitivity
10dB
S/N Ratio
60dB
Distortion
0.5%
Composite Video
VIDEO
OUTPUT Scart Jack
A
M
P
L
I
F
I
E
R
1.0Vp-p(75Ω load)
Compositive Video : 1.0Vp-p(75Ω load)
RGB Signal : 0.714Vp-p(75Ω load)
Front speaker output
32W(4Ω)/CH
Center speaker output
63W(4Ω)
Rear speaker output
32W(4Ω)/CH
Subwoofer speaker output
64W(8Ω)
Frequency range
20Hz~20kHz
S/N Ratio
75dB
Channel separation
50dB
Input sensitivity
(AUX)500mV
Speaker system
S
P
E
A
K
E
R
GB
5.1ch speaker system
Center speaker
Subwoofer speaker
4Ω x 4
4Ω
8Ω
150Hz~20kHz
150Hz~20kHz
30Hz~150Hz
85dB/W/M
85dB/W/M
86dB/W/M
Rated input
32W
63W
64W
Maximum input
64W
126W
128W
90 x 107 x 95 mm
160 x 90 x 95 mm
145 x 320 x 340 mm
0.36 Kg / 0.3 Kg
0.45 Kg
3.6 Kg
Impedance
Frequency range
Output sound pressure level
Dimensions (W x H x D)
Weights
60
Downloaded From TheatreSystem-Manual.com Manuals
MISCELLANEOUS
Front/Rear speaker
1p~30p(P10)-GB
2/1/05 10:44 AM
Page 2
THIS APPLIANCE IS MANUFACTURED BY:
AH68-01660B
Downloaded From TheatreSystem-Manual.com Manuals
Download PDF