Radial Engineering Elevator Smart Sheet

Add to my manuals
1 Pages

advertisement

Radial Engineering Elevator Smart Sheet | Manualzz

Tonebone

±

Smart Sheet

Applications

• Reduces noise from your pedal chain

• Drives longer cables up to 15 meters (50’)

• Increases the signal level for solos

• Dominating the world in a nice way

ElEvator

± m u lt i

-

l e v e l b o o s t e r

The Elevator is a multi-level power booster designed to push the front end of a guitar amplifier for more punch while lowering overall system noise. Unlike most pedals that employ integrated chips (ICs) to create gain, the Elevator features a 100% discrete class-A signal path. This delivers the ultimate in natural tone and a smooth boost that generates beautiful creamy sustain. On the ground floor, a selector switch lets you set the Elevator to true-bypass for those that prefer a direct feed to the amp when the boost is out of the circuit. Level-2 lets you activates a unity gain buffer that will drive the guitar signal to 15 meters (50’) without noise. This also activates the Drag™ control load correction circuit

(Level-3). This replicates the ‘tone and feel’ as if connected directly to your amp yet eliminates problems such as tone loss due to cables or popping when switching with high gain amps. Level-4 activates a ‘baseline’ power booster that pushes the front end of the amp for more crunch and bite. This ‘set & forget’ control is particularly useful with vintage amps that do not produce the high gain effects of today’s more modern designs. Level-5 is a variable power booster that delivers up to 18dB of pure gain for soloing. And Level-6 is a three-position mid boost switch lets you increase the mid range for added sustain.

Elevator - Order # R800 7225

Features

• 100% discrete, class-A circuit for 18dB of natural boost

• Drag control load correction for best feel

• Choice of true-bypass or buffered signal chain

• Mid boost for extra sustain for soloing

MID BOOST - 3-position switch lets you add extra mid-range for greater sustain and stage presence.

9VDC - Connection for standard 9 volt DC power adapter (center pin negative).

TRUE BYPASS -

Takes the Elevator completely out of the signal path when the booster is not in use.

BUFFER - Activates the Drag control load correction and buffers the signal.

DRIVE PRESET -

Introduces the BASELINE drive to your signal.

DRIVE - Sets the baseline drive level.

Cool Stuff

• Super compact design, fits on pedalboard

• Uses standard 9V power supply

• Lets you kick up your amp for amazing tone

• Sounds better than any other power booster

DRAG - Load correction lets you replicate the tone and feel as if connected directly to your amp.

Dimensions (W x D x H)

• 4.7” x 3.5” x 1.9” (118mm x 89mm x 49mm)

• 3 Year transferable warranty

GAIN - Delivers up to 18dB of clean gain for soloing and taking total control on the stage!

BOOST - Footswitch with status LED activates the power booster and MID Boost.

Using the Elevator with pedals

Set your overdrive pedal to your favorite crunch tone and then use the Elevator to hit it harder for more drive. Add mid range or combine with a wah set half-way to approach Bryan

May’s unique tone.

GUITAR

INPUT

TRUE

BYPASS

LEVEL-1

CLASS-A

BUFFER

LEVEL-2

DRAG

CONTROL

LEVEL-3

BASELINE

GAIN

LEVEL-4

POWER

BOOST

LEVEL-5

OUTPUT

AMP

MID

BOOST

LEVEL-6

“Distortion pedals sound like a novelty effect and detract from the qualities of a great amp. The Elevator makes distortion pedals obsolete.”

- G.E. Smith

Bob Dylan, Roger Waters, Hall & Oats, Mick Jagger

Radial Engineering Ltd. • Tonebone Smart Sheet © Copyright 2015 all rights reserved · www.radialeng.com · email [email protected] • Subject to change without notice • Made in Canada

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement