Remote Panel (UK)

Remote Panel (UK)
Remote Panel
Ease of use
The remote panel displays remote UPS status in real time. An
additional bar graph shows the current UPS load and remaining
capacity in emergency power mode. Besides the visual indicators,
the panel has an acoustic alarm (which can be disabled), plus a
shutdown contact to enable a remote UPS shutdown in the event
of an emergency. The remote panel can be installed at a distance
of up to 500 meters. Data and power are supplied to the remote
panel over a conventional patch cable. The remote panel is
available for Protect C. Tower (6 kVA and higher), Protect 1.
and Protect 1.M UPS units.
Key features:
• Robust enclosure with rear wall mounts
• Power supply and data communication over standard Ethernet
patch cable (RJ45)
• Can be installed at distances up to 500m
• Acoustic alarm can be enabled to signal critical operating states
• Emergency shutdown contact
• Hot-swappable
• Controlled via slot card (included)
• Clearly structured display indicates current operating state
• No network required
Remote Panel: Technical data
TECHNICAL DATA
Compatibility Includes
Dimensions
Weight
AEG part number
Protect C. (Tower from 6 kVA), Protect 1, Protect 1.M
Remote Panel, control slot card, user guide
150 mm x 110 mm x 40 mm (W x H x D)
720 g
600 000 5881
AEG is a registered trademark used under license from AB Electrolux • Specifications are subject to change without notice • 03/2009
AEG Power Solutions Ltd.
Units 1-2, 97-101 Peregrine Road
Hainault, Ilford
Essex IG6 3XJ
United Kingdom
Tel.: +49 2902 763 168
Fax: +49 2902 763 169
www.aegpartnernet.co.uk
PERFECT IN FORM AND FUNCTION
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement