Cisco | 7604-RSP720C-R | Chapter 1: Routing

This chapter includes only a subset of Cisco products and part numbers. Also, you will see products listed
multiple times because they serve multiple roles and are used differently in small, medium, and large
networks.
Routing At-a-Glance
Product
Features
Page
BRANCH ROUTERS
Cisco 3900 Series
Integrated Services
Routers
Cisco 2900 Series
Integrated Services
Routers
Cisco 1900 Series
Integrated Services
Routers
Cisco 800 Series
Routers
• Ideal for high-end deployments requiring business continuity, WAN flexibility, WAN
optimization, superior collaboration capabilities, and investment protection
• Delivers scalable rich-media services including TelePresence, support for medianet,
highest density of service virtualization, and lowest total cost of ownership (TCO) with
energy efficiency
• Offers field-upgradeable motherboard, circuit-speed WAN performance up to 350 Mbps
with services such as security, mobility, WAN optimization, unified communications,
video, and customized applications
• Has three rack unit (3RU) modular form factor
• Ideal for midrange deployments requiring business agility, WAN flexibility, and secure
collaboration
• Provides rich-media services including TelePresence, support for medianet, service
virtualization, and lower TCO with energy efficiency
• Offers circuit-speed WAN performance up to 75 Mbps with services such as security,
mobility, WAN optimization, unified communications, voice gateway, video, and
customized applications
• Has 1RU to 2 RU modular form factor
• Ideal for small offices requiring modular flexibility for highly secure mobility and
customizable applications
• Offers entry-level, highly secure solution for WAN deployments; offers service
virtualization and low TCO
• Offers circuit-speed performance up to 25 Mbps with concurrent services
• Offers factory-selectable dual radio 802.11n access point and doublewide high-speed
WAN interface card (HWIC) support; has desktop form factor
• Ideal for small offices and teleworkers, or to service providers to deploy as part of their
managed network services
• Delivers data, security, wireless, third-generation wireless, Survivable Remote Site
Telephony (SRST), and Cisco Unified Border Element (CUBE)
• Provides for highly scalable true zero touch deployments
1–4
1–10
1–15
1–19
WAN ROUTERS
• Ideal for service providers that deliver consumer and business services over a single
converged Carrier Ethernet network
• Industry-leading carrier-class edge router offering integrated, high-density Ethernet
switching, IP/MPLS routing, and 10-Gbps interfaces
• Offers a choice of form factors purpose-built for high availability
• Ideal for both service providers and enterprise applications
Cisco 7300 Series
Routers
• Compact, high-performance one-rack-unit (1RU) router coupled with a broad set of
interfaces and Cisco IOS® Software features
• Ideal for enterprise and service provider edge applications
Cisco 7200 Series
Routers
• Optimized for delivering integrated services for up to OC-3 bandwidth
• Supports a wide range of density, performance, and service requirements
• Delivers an exceptional price-to-performance ratio, versatility, and feature richness in a
compact form factor
Cisco ASR 1000 Series • Ideal for medium-sized to large enterprises and service providers
Aggregation Services • Industry-leading performance, service capabilities, reliability, and efficiencies in a
Routers
compact form factor supporting up to 40 Gbps
• Highly secure, high-performance and integrated hardware-based services without the
need for additional hardware modules
• Extends network as a platform for cloud computing to help conserve resources and
optimize performance
• Cisco Unified Border Element support for SIP trunking; lowers total communications
costs, optimizes network interconnections and enables rich collaboration applications.
• Simplifies operations, reduces network costs, and increases resiliency through its Virtual
Cisco Catalyst 6500
Switch System 1440 technology
Series Switches
• Automates network services, energy control and minimizes total cost of ownership with
features such as GOLD, OBFL, SmartCallHome, Energywise
• Delivers comprehensive features for operational management, integrated services, QoS,
and high availability
• Integrates services through its portfolio of service modules
Cisco 7600 Series
Routers
1–23
1–26
1–27
1–35
See
2–5
Chapter 1: Routing 1-1
Rout i ng
Chapter 1: Routing
SERVICE PROVIDER CORE/EDGE ROUTERS
• Ideal for service providers across all market segments
1–29
• CRS-3 powered by the Cisco QuantumFlow Array
• CRS-1 is built on the Cisco Silicon Packet Processor (SPP)
• Scales easily from numerous single-chassis form factors to a massive multichassis
system, up to 322 Tbps
• Provides industry-leading efficiency, requiring low power, cooling, and rack-space use for
intelligent, service-rich bandwidth capacity
• Each model (CRS-1 and CRS-3) uses Cisco IOS XR Software, a unique self-healing,
distributed operating system
• Ideal for large enterprises and service providers
Cisco XR 12000/
1–31
12000 Series Routers • XR 12000 Series Routers- extend highly secure virtualization, integral service delivery,
continuous system operation, and multiservice scale
• 12000 Series Routers- feature Cisco I-Flex, a portfolio of shared port adapters (SPAs) and
SPA interface processors (SIPs)
Cisco Carrier Routing
System
Cisco ASR 9000 Series • Ideal for carriers offering residential and business services
Aggregation Services • Delivers nonstop video and enhanced scalability in a reduced carbon footprint, along
Routers
with industry-leading levels of carrier transport
• Provides carrier-class reliability for continuous service operation and high availability
• Scales up to 6.4 Tbps per system and delivers comprehensive system redundancy
Cisco ASR 1000 Series • Ideal for both medium-sized to large enterprises and service providers
Aggregation Services • Industry-leading performance, service capabilities, reliability, and efficiencies in a
Routers
compact form factor supporting up to 40 Gbps
• Highly secure, high-performance and integrated hardware-based services without the
need for additional hardware modules
• Extends network as a platform for cloud computing to help conserve resources and
optimize performance
Cisco ASR 900 Series • Designed for the mobile wireless and wire-line preaggregation/aggregation function with
flexible WAN and LAN interfaces.
Aggregation Services
Routers
• Delivers high availability through in-box hardware redundancy and In-Service Software
Upgrade (ISSU)
*NEW PRODUCT*
• Ideal for mobile backhaul deployment with compact form factor, temperature-hardened
platform, modular Ethernet and TDM interface cards, comprehensive timing
synchronization support, and hardware-assisted OAM functions
• Provides rich Carrier Ethernet features enabling the delivery of intelligent Layer 2 and 3
services.
• Ideal for service providers that deliver consumer and business services over a single
Cisco 7600 Series
converged Carrier Ethernet network
Routers
• Industry-leading carrier-class edge router offering integrated, high-density Ethernet
switching, IP/MPLS routing, and 10-Gbps interfaces
• Offers a choice of form factors purpose-built for high availability
• Ideal for both service providers and enterprise applications
Cisco 7300 Series
Routers
• Compact, high-performance one-rack-unit (1RU) router coupled with a broad set of
interfaces and Cisco IOS® Software features
• Ideal for enterprise and service provider edge applications
Cisco 7200 Series
Routers
• Optimized for delivering integrated services for up to OC-3 bandwidth
• Supports a wide range of density, performance, and service requirements
• Delivers an exceptional price-to-performance ratio, versatility, and feature richness in a
compact form factor
1–33
1–35
1–38
1–23
1–26
1–27
CONNECTED GRID ROUTERS
• Designed specifically for the harsh, rugged environments often found in the energy and 1–40
Cisco 2000 Series
Connected Grid Router utility industries
• KEMA certified to meet challenging compliance standards such as IEC 61850-3 and IEEE
1613
• Integrated security to help address compliance with critical infrastructure protection
mandates
• High availability design for optimum network up time and redundancy
• Network and device management tools for deployments, upgrades, and remote
monitoring
• Advanced quality of service (QoS) capabilities to support mission-critical
communications such as SCADA (Supervisory Control and Data Acquisition)
• Comprehensive network security features based on open standards
SMALL BUSINESS ROUTERS
Cisco SRP 500 Series • Help enable service providers to deliver differentiated, converged service offers that
1–41
increase bandwidth usage and average revenue per user while reducing customer churn
Services Ready
Platforms
• Fixed-configuration customer premises equipment (CPE) to enable service providers to
create, provision, and deploy premium revenue-generating services to small businesses
• Support a variety of high-quality voice, data, security, wireless, and application services.
Cisco RV Series Small • Highly secure network access devices, designed and built for small businesses
1–42
Business Routers
• Highly secure VPN connectivity for remote workers
• Strong security features, including an advanced stateful packet inspection (SPI) firewall,
*NEW PRODUCT*
encryption, authentication, and access control
• Fast Ethernet ports and Gigabit Ethernet ports
1-2
Chapter 1: Routing
Cisco Routing and Switching Services use leading practices and time-tested methodologies to help you to:
• Successfully integrate new technologies and applications onto the routing and switching platform
• Reduce risk, delays, and the total cost of network deployments
• Keep network devices and applications secure, available, and operating reliably
• Optimize your secure wired and wireless networks to meet future needs
• Achieve operational excellence
1–43
FOR MORE INFORMATION
Product Ordering
To place an order, visit: http://www.cisco.com/en/US/ordering/index.shtml.
End-of-Life and End-of-Sale
Please visit the end-of-life and end-of-sale website for a complete and up-to-date listing of products that are no longer being
sold or supported, what replacement products are available, and information about product support.
http://www.cisco.com/en/US/products/prod_end_of_life.html
NOTE: This chapter provides only a subset of Cisco products and part numbers. For the most up-to-date and comprehensive
information, refer to the Cisco website at http://www.cisco.com, the Cisco ordering website at http://www.cisco.com/en/US/
ordering/index.shtml, or reference the URL listed in the “For More Information” section of each product.
For more Cisco routing platforms, refer to the Cisco Routing Guide at http://www.cisco.com/go/routerguide.
Cisco Integrated Services Routers Model Comparison
Cisco
3945E
Cisco
3925E
Cisco
3945
Cisco
3925
Cisco
2951
Cisco
2921
Cisco
2911
Cisco
2901
Cisco
1941/
1941W
Cisco
1921
Form Factor
3 rack
units
(3RU)
3RU
3RU
3RU
2RU
2RU
2RU
1RU
2RU
1RU
Integrated WAN
Ports
4 GE
(2 SFP)
4 GE
(2 SFP)
3 GE
(2 SFP)
3 GE
(2 SFP)
3 GE
(1 SFP)
3 GE
(1 SFP)
3 GE
2 GE
2 GE
2 GE
Interface Slots
(EHWIC)
3
3
4
4
4
4
4
4
2
2
Service Module
Slots
4
2
4
2
2
1
1
0
0
0
ISM Slots
0
0
1
1
1
1
1
1
1
0
PVDM3 Slots
3
3
4
4
3
3
2
2
0
0
USB Ports (v2.0)
2
2
2
2
2
2
2
2
2
1
Default/Max
Flash
256MB/
4GB
256MB/
4GB
256 MB/ 256 MB/ 256 MB/ 256 MB/ 256 MB/ 256 MB/ 256 MB/ 256 MB/
4GB
4 GB
4 GB
4 GB
4 GB
4 GB
4 GB
256 MB
Default/Max
SDRAM
1 GB/
4 GB1
1 GB/
4 GB1
1 GB/
4 GB1
1 GB/
4 GB1
512 MB/ 512 MB/ 512 MB/ 512 MB/ 512 MB/ 512 MB/
2.5 GB
2.5 GB
2.5 GB
2.5 GB
2.5 GB
2.5 GB
742
982
742
502
Modular LAN
982
Switchports (with
optional PoE)
502
WAN
Optimization
Enabled via WAAS on the SRE module or WAAS Express
WAAS Support
on SRE Service
Modules 700,
710, 900, and
910
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
242
162
112
9
No
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
SRE 700,
710, 900,
and 910
with
WAAS
4.3 or
later
SRE 700, No
710, 900,
and 910
with
WAAS
4.3 or
later
No
Platform
supports Cisco
WAAS Express
Yes
Yes
Yes
Yes
Yes
Yes
Yes
WAAS Express
Optimized TCP
Connections
500
500
500
250
250
150
150
WAAS Express
WAN Capacity
10 Mbps 10 Mbps 10 Mbps 6 Mbps
6 Mbps
6 Mbps
4 Mbps
Advanced
Security
Enabled via Security License for Universal IOS Image. FW, IPS, and Content Filtering, ScanSafe
Web Security need additional subscription licenses
Stateful Firewall
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Chapter 1: Routing
1-3
Rout i ng
SERVICES
Onboard
Yes
Hardware VPN
Acceleration
(DES, 3DES, AES)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Intrusion
prevention
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Content filtering
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
ScanSafe Web
Security
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Unified
Communication
Enabled via Unified Communications License for Universal IOS Image. CCME/SRST support
through separate feature licenses
Local
conferencing
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
—
—
Voice and Video
DSP support
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
PVDM3
and
PVDM2
—
—
Survivable
Up to
Remote Site
1500
Telephony (SRST)
Up to
1350
Up to
1200
Up to
730
Up to
250
Up to
100
Up to 50 Up to 35 —
—
Cisco Unified
Up to
Communications 450
Manager Express
Up to
400
Up to
3503
Up to
2503
Up to
150
Up to
100
Up to 50 Up to 35 —
—
Cisco Unity™
Express (network
module [NM],
service module
[SM], or ISM)
32 ports;
300
mailboxes
32 ports;
300
mailboxes
32 ports;
300
mailboxes
32 ports;
300
mailboxes
32 ports;
300
mailboxes
32 ports;
300
mailboxes
32 ports;
300
mailboxes
10 ports; —
100
mailboxes
—
Cisco Unified
Border Element
sessions
2500
2100
950
800
600
400
200
100
—
—
Cisco Unified SIP 200 CPS
Proxy
(with
SRE-700
and
SRE900)
100 CPS
(with
SRE-700
and
SRE900)
200 CPS
(with
SRE-700
and
SRE900)
100 CPS
(with
SRE-700
and
SRE900)
100 CPS
(with
SRE-700
and
SRE900)
10 CPS
(with
SRE-700
and
SRE900)
10 CPS —
(with
SRE-700
and
SRE900)
—
—
Digital voice
support
Up to
840
Up to
600
Up to
900
Up to
720
Up to
400
Up to
240
Up to
150
Up to
100
—
—
Maximum voice
support for
analog and Basic
Rate Interface
(BRI)
FXS: 108 FXS: 60
FXO: 36
FXO: 60 BRI: 22
BRI: 38
FXS:40
FXO: 28
BRI: 16
FXS:40
FXO: 28
BRI: 16
FXS: 40
FXO: 28
BRI: 16
FXS: 16
FXO: 16
BRI: 8
—
—
FXS: 112 FXS: 64
FXO: 40
FXO: 64 BRI: 24
BRI: 40
Online model comparison chart: http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html
1. Up to 2 GB available for use; upgrade to 4 GB available in future.
2. LAN Switching counts for the Cisco 2911 through Cisco 3945 and Cisco 3945E routers based on latest generation of
switch service module.
3. Scales to documented phone support in 15.0.1 build.
Branch Routers
Cisco 3900 Series Integrated Services Routers
Cisco 3900 Series Integrated Services Routers (ISRs) are designed
to power the next phase of branch-office evolution, providing richmedia collaboration and virtualization to the branch office while
reducing operating costs.
Cisco 3900 Series Integrated Services Routers build on 25 years of
Cisco innovation and product leadership. The new Cisco Integrated Services Routers Generation 2 (ISR G2)
platforms are architected to enable the next phase of branch-office evolution, providing rich-media
collaboration and virtualization to the branch office while maximizing operational cost savings. The new routers
support new high-capacity digital signal processors (DSPs) known as PVDM3 for higher density voice services
plus basic video-conferencing capabilities, high-powered service modules with improved availability,
multicore CPUs, Gigabit Ethernet switching with Cisco Enhanced Power over Ethernet (ePoE), and new energy
visibility and control capabilities while enhancing overall system performance.
Additionally, a new Cisco IOS Software Universal image and Cisco Services Ready Engine (SRE) module
enable you to decouple the deployment of hardware and software, providing a flexible technology foundation
1-4
Chapter 1: Routing
Ideal for Companies That Need These Features
Cisco 3945E
• Modular Services Performance Engine (SPE) 250, which can be upgraded for even higher
performance as next-generation WAN environments evolve
• Four integrated 10/100/1000 Ethernet ports with 2 ports capable of RJ-45 or Small FormFactor Pluggable (SFP) connectivity
• Four service-module slots
• Three enhanced high-speed WAN interface card (HWIC) slots
• Three onboard digital-signal-processor (DSP) slots
• Up to 2500 SIP trunk sessions
• Dual integrated power supplies
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
Cisco 3925E
• Modular Services Performance Engine (SPE) 200 for even higher performance as WAN
environments evolve
• Four integrated 10/100/1000 Ethernet ports with two Small Form-Factor Pluggable (SFP)
ports
• Two service-module slots
• Three enhanced high-speed WAN interface card (EHWIC) slots
• Three onboard digital-signal-processor (DSP) slots
• Up to 2100 SIP trunk sessions
• Dual integrated power supplies
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
Cisco 3945
• Modular Services Performance Engine (SPE) 150, which can be upgraded for even higher
performance as next-generation WAN environments evolve
• Four integrated 10/100/1000 Ethernet ports with two ports capable of RJ-45 or Small FormFactor Pluggable (SFP) connectivity
• Four service-module slots
• Four enhanced high-speed WAN interface card (EHWIC) slots
• Four onboard digital-signal-processor (DSP) slots
• Up to 950 SIP trunk sessions
• One integrated-services-module slot
• Dual integrated power supplies
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
Cisco 3925
• Modular Services Performance Engine (SPE) 100 for even higher performance as WAN
environments evolve
• Three integrated 10/100/1000 Ethernet ports with two SFP ports
• Two service-module slots
• Four enhanced high-speed WAN interface card (EHWIC) slots
• Four onboard digital-signal-processor (DSP) slots
• Up to 800 SIP trunk sessions
• One integrated-services-module slot
• Dual integrated power supplies
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
Chapter 1: Routing
1-5
Rout i ng
that can quickly adapt to evolving network requirements. Overall, the Cisco 3900 Series offers exceptional total
cost of ownership (TCO) savings and network agility through the intelligent integration of market-leading
security, unified communications, wireless, and application services.
The routers include:
• Services on demand—The Cisco 3900 Series Integrated Services Routers reduce initial capital outlays by
decoupling the delivery of software from hardware on optional service modules. In addition, you receive a
Universal Cisco IOS Software image capable of enabling all of Cisco's rich Cisco IOS Software features and
allowing you to quickly deploy new services.
• Investment protection—The Cisco 3900 Series reduces deployment costs and increases flexibility. The
platform offers a modular, field-upgradable motherboard called the Services Performance Engine (SPE).
SPEs allow you to invest in a Cisco 3900 Series ISR today and boost its performance later by upgrading to a
higher-performance engine. Investment protection is also offered with support for most existing modules
from previous-generation ISRs.
• The Cisco Unified Border Element features on the Cisco 3900 provides additional investment protection by
allowing enterprises to gracefully transition from legacy TDM Voice to IP-based Unified Communications
without the need for hardware upgrades.
• Energy efficiency—The Cisco 3900 Series architecture includes higher-efficiency power supplies with
intelligent power management, with full Cisco EnergyWise feature support in the future. Both Cisco 3925
and 3945 routers support dual power supplies for power-supply redundancy for branch-office or retail
environments running mission-critical applications.
• High performance—The Cisco 3900 Series offers significant performance improvements over previousgeneration ISRs.
Overall, the Cisco 3900 Series offers unparalleled total-cost-of-ownership (TCO) savings and network agility
through the intelligent integration of security, wireless, rich media, and application services.
Key Features and Benefits
• Modular platform
- The Cisco 3900 Series routers are highly modular platforms with several types of module slots to add
connectivity and services for varied branch-office network requirements.
- The routers offer an industry-leading breadth of LAN and WAN connectivity options through modules to
accommodate field upgrades to future technologies without requiring platform replacement.
- The Cisco SPE on the Cisco 3900 offers the ability to increase the performance of the router with a fieldupgradable motherboard as your network needs grow.
• Processors
- The Cisco 3900 Series routers are powered by high-performance multi-core processors that can
support the growing demands of high-speed WAN connections to the branch office while also running
multiple concurrent services.
• Advanced security with embedded IP Security with Secure Sockets Layer (IPSec/SSL) VPN hardware
acceleration
- Embedded hardware encryption acceleration is enhanced to provide higher scalability, which, combined
with an optional Cisco IOS Software Security license, enables WAN link security and VPN services (both
IPSec and SSL acceleration).
- The onboard encryption hardware outperforms the advanced integration modules (AIMs) of previous
generations.
- The routers support Cisco Easy VPN (remote and server), Dynamic Multipoint VPN (DMVPN), Group
Encrypted VPN (GET VPN), and Secure Socket Layer VPN (SSL VPN). The 3900 Series routers support
Multiprotocol Label Switching (MPLS) VPNs. Specific provider-edge capabilities include Virtual Route
Forwarding (VRF) firewall and VRF IP Security (IPsec).
- More than 3700 intrusion-prevention-system (IPS) signatures are supported in Cisco IOS Software, with
the ability to load and enable selected IPS signatures. More than 4500 IPS signatures are available with
the optional high-performance intrusion-prevention-system (IPS) network module.
- Content Filtering includes URL/keyword blocking and features category-based productivity and security
ratings. This is a subscription-based hosted solution that leverages Trend Micro's global TrendLabs™
threat database, and is closely integrated with Cisco IOS Software.
- Cisco Configuration Professional comes standard on all Cisco 3900 Series Integrated Services Routers.
• WAN Optimization with WAAS Express
- Cisco Wide Area Application Services (WAAS) Express, based on Cisco IOS® Software and integrated
into the Cisco 3900 Series routers offers bandwidth optimization and application acceleration
capabilities in a cost-effective solution
- Fully integrated in Cisco IOS Software, with no additional hardware requirement (the maximum DRAM is
needed in the router). This integration allows significant savings in capital expenditures (CapEx) by
enabling a small-footprint branch-office deployment.
- Increases remote user productivity, reduces WAN bandwidth costs, and offers investment protection by
interoperating with existing Cisco WAAS infrastructure.
- Uniquely provides network transparency, improving deployment flexibility with on-demand service
enablement, and integrating with native Cisco IOS Software services such as security, NetFlow, and
quality of service (QoS).
- Fully interoperable with Cisco WAAS Modules for Services-Ready Engine (SRE) and Cisco WAAS
appliances and can be managed by a common Cisco WAAS Central Manager.
- Offers Context-Aware DRE for reduced latency and increased end-user experience.
- Organizations can enable Cisco WAAS Express as an on-demand service on the router and can expand
to the Cisco WAAS Modules for SRE or a dedicated Cisco WAAS appliance as business needs grow.
• WAN Optimization with Cisco Wide Area Application Services (WAAS) Software on Cisco Integrated
Services Routers Generation 2 (ISR G2)
- Cisco WAAS Software on Cisco 3900 Series provides router-integrated, on-demand WAN optimization
and application acceleration for branch offices.
- Cisco WAAS offers the option to integrate physically with first- and second-generation Cisco ISRs.
- The Cisco Services Ready Engine (SRE) Modules on the ISR G2 platform, which decouple software
services from the underlying hardware, can deliver WAN optimization as an on-demand service as
required for business objectives and IT budget.
- Cisco WAAS Software is licensed with two types of feature capability for deployment on the Cisco SRE
Modules. The software licenses are common across Cisco SRE 700 SM, SRE 710 SM, SRE 900 SM, and
SRE 910 SM.
- Transport license—Supports WAN optimization features including Data Redundancy Elimination
(DRE), Lempel-Ziv (LZ) compression, and Transport Flow Optimization (TFO)
- Enterprise license—Includes Cisco WAAS Transport license functions (Data Redundancy
Elimination (DRE), Lempel-Ziv (LZ) compression, and Transport Flow Optimization (TFO)) plus
application-specific accelerations for protocols including Common Internet File System (CIFS),
Messaging Application Programming Interface (MAPI),
• Multigigabit fabric (MGF)
- The Cisco 3900 Series introduces an innovative MGF that allows for efficient module-to-module
communication, enabling tighter services interactions across modules while reducing the overhead on
the router processor.
• TDM interconnectivity fabric
- Unified communications services in the branch office are significantly enhanced with the use of TDM
interconnectivity fabric in the router architecture, allowing for scaling of DS-0 channel capacity.
• Integrated Gigabit Ethernet ports
- The Cisco 3900 Series provides up to four 10/100/1000 Ethernet WAN ports.
- Two of the 10/100/1000 Ethernet WAN ports on the Cisco 3900 Series can support Small Form-Factor
Pluggable (SFP)-based connectivity in lieu of RJ-45 ports, enabling fiber connectivity.
• High-capacity Packet Voice Video Digital Signal Processor Module (PVDM3)
1-6
Chapter 1: Routing
•
•
•
Specifications
Services and Slot Density
Cisco 3945E
Cisco 3925E
Cisco 3945
Cisco 3925
Embedded hardware-based cryptography
acceleration (IPSec + Secure Sockets Layer
[SSL])
Yes
Yes
Yes
Yes
Cisco Unified Communications Manager
Express Sessions
450
400
350
250
Cisco Unified SRST sessions
1500
1350
1200
730
Cisco Unified Border Element sessions
2500
2100
950
800
Total onboard WAN or LAN 10/100/1000
ports
4
4
3
3
RJ-45-based ports
4
4
3
3
SFP-based ports
2
2
2
2
Service-module slots
4
2
4
2
Doublewide service-module slots
1
1
1
1
EHWIC slots
3
3
4
4
Doublewide EHWIC slots
1
1
2
2
ISM slots
0
0
1
1
Online insertion and removal (OIR)
Services
modules
Services
modules
Services
modules
Services
modules
Onboard DSP (PVDM3) slots
3
3
4
4
Memory DDR2 ECC DRAM: Default
1 GB
1 GB
1 GB
1 GB
Memory DDR2 ECC DRAM: Maximum
2 GB
2 GB
2 GB
2 GB
Compact Flash (external): Default
Slot 0: 256 MB
Slot 1: None
Slot 0: 256 MB
Slot 1: None
Slot 0: 256 MB
Slot 1: None
Slot 0: 256 MB
Slot 1: None
Compact Flash (external): Maximum
Slot 0: 4 GB
Slot 1: 4 GB
Slot 0: 4 GB
Slot 1: 4 GB
Slot 0: 4 GB
Slot 1: 4 GB
Slot 0: 4 GB
Slot 1: 4 GB
External USB 2.0 slots (Type A)
2
2
2
2
USB console port (Type B) (up to 115.2 kbps) 1
1
1
1
Serial console port (up to 115.2 kbps)
1
1
1
1
Serial auxiliary port (up to 115.2 kbps)
1
1
1
1
Power-supply options
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Redundant power supply
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Internal: AC, PoE,
and DC
Chapter 1: Routing
1-7
Rout i ng
•
- Enhanced architecture delivers a new packet-processing engine optimized for video and rich-media
applications, while concurrently supporting packet voice
- Enables scaling of high-definition (HD) voice capacity and is optimized for enhanced video capabilities
- Supports full suite of medianet features
Innovative universal-serial-bus (USB)-based console access
- A new, innovative, mini-B USB console port supports management connectivity when traditional serial
ports are not available.
- Traditional console and auxiliary ports are also available.
Optional integrated power supply for distribution of PoE and universal DC power supply
- An optional upgrade to the internal power supply provides inline power (802.3af-compliant PoE, Cisco
ePoE, and Cisco Inline Power) to optional integrated switch modules.
- An optional DC power supply that extends possible deployment environments such as central offices and
industrial environments will be available in the future.
Optional integrated redundant power supply (RPS) and PoE boost
- Power redundancy is available by installing an optional integrated RPS, thereby decreasing network
downtime and protecting the network from power-supply failures.
- When populated with dual integrated power supplies, the Cisco 3900 Series can operate in a configurable
PoE boost mode in lieu of redundant power mode whereby the power capacity of the platform is
increased to almost twice the normal power to support additional PoE ports.
Designed for flexible deployments
- The Cisco 3945 and 3925 are designed for Network Equipment Building Systems (NEBS) environments.
WAN Optimization with WAAS Express
Yes
Yes
Optimized TCP Connections with WAAS
Express
500
500
WAS Capacity with WAAS Express
10 Mbps
10 Mbps
DRAM Required for WAAS Express
4 GB
4 GB
100 to 240 VAC
autoranging
100 to 240 VAC
autoranging
Power Specifications
AC input voltage
100 to 240 VAC
autoranging
AC input frequency
47 to 63 Hz
47 to 63 Hz
47 to 63 Hz
47 to 63 Hz
AC input current range, AC power supply
(maximum)
7.1 to 3.0A
7.1 to 3.0A
7.1 to 3.0A
7.1 to 3.0A
AC input surge current
<50A
<50A
<50A
<50A
Typical power (no modules) (watts)
105
100
105
100
Maximum power with AC power supply
(watts)
540
420
540
420
Maximum power with PoE power supply
(platform only) (watts)
540
420
540
420
Maximum endpoint PoE power available from 520
PoE power supply (watts)
520
520
520
Maximum endpoint PoE power capacity with 1040
PoE boost (watts)
1040
1040
1040
Dimensions (H x W x D)
5.25 x 17.25 x
18.75 in.
(133.35 x 438.15 x
476.25 mm)
5.25 x 17.25 x
18.75 in.
(133.35 x 438.15 x
476.25 mm)
5.25 x 17.25 x
18.75 in.
(133.35 x 438.15 x
476.25 mm)
5.25 x 17.25 x
18.75 in.
(133.35 x 438.15 x
476.25 mm)
Rack height
3 rack units (3RU)
3RU
3 RU
3RU
Rack-mount 19 in. (48.3 cm) EIA
Included
Included
Included
Included
Rack-mount 23 in. (58.4 cm) EIA
Optional
Optional
Optional
Optional
Wall-mount
No
No
No
No
Weight with AC power supply (no modules)
39 lb (17.7 kg)
39 lb (17.7 kg)
39 lb (17.7 kg)
39 lb (17.7 kg)
Weight with PoE power supply (no modules)
40 lb (18.1 kg)
40 lb (18.1 kg)
40 lb (18.1 kg)
40 lb (18.1 kg)
Typical weight (with modules)
60 lb (27.2 kg)
60 lb (27.2 kg)
60 lb (27.2 kg)
60 lb (27.2 kg)
Airflow
Back to front
Back to front
Back to front
Back to front
Optional airflow kit (includes filter)
None
None
Front to back
Front to back
100 to 240 VAC
autoranging
Online model comparison chart: http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html
The Cisco 3900 Series supports a wide range of modules that span industry-leading breadth of services at the branch office. For
a list of modules supported on the Cisco 3900 Series, visit:
http://www.cisco.com/en/US/products/ps10536/products_relevant_interfaces_and_modules.html.
Selected Part Numbers and Ordering Information
Cisco 3900 Series Integrated Services Routers
CISCO3945E/K9
Cisco 3945 w/SPE250(4GE, 3EHWIC, 3DSP,4SM, 256MBCF,1GBDRAM,IPB)
CISCO3925E/K9
Cisco 3925 w/SPE200(4GE, 3EHWIC, 3DSP, 2SM, 256MBCF,1GBDRAM,IPB)
CISCO3945/K9
Cisco 3925 w/SPE150(3GE,4EHWIC,4DSP,4SM, 256MBCF,1GBDRAM,IPB)
CISCO3925/K9
Cisco 3945 w/SPE100(3GE,4EHWIC,4DSP, 2SM, 256MBCF,1GBDRAM,IPB)
C3900-SPE250/K9=
Cisco Services Performance Engine 250 for Cisco 3945E ISR (Spare)
C3900-SPE200/K9=
Cisco Services Performance Engine 200 for Cisco 3925E ISR (Spare)
C3900-SPE150/K9=
Cisco Services Performance Engine 150 for Cisco 3945 ISR (Spare)
C3900-SPE100/K9=
Cisco Services Performance Engine 100 for Cisco 3925 ISR (Spare)
C3900-SPE100/K9=
Cisco Services Performance Engine 100 for Cisco 3925 ISR (Spare)
Cisco 3900 Series Secure Voice Bundles1
C3945E-VSEC/K9
1-8
Chapter 1: Routing
Cisco 3945E Voice Sec. Bundle, PVDM3-64, UC and SEC License PAK
Cisco 3925 EVoice Sec. Bundle, PVDM3-64, UC and SEC License PAK
C3945-VSEC/K9
Cisco 3945 Voice Sec. Bundle, PVDM3-64, UC and SEC License PAK
C3925-VSEC/K9
Cisco 3925 Voice Sec. Bundle, PVDM3-64, UC and SEC License PAK
Rout i ng
C3925E-VSEC/K9
Cisco 3900 Series Secure Voice and CUBE Bundles1
C3925-VSEC-CUBE/K9
Cisco 3925 Voice Sec and CUBE Bundle, PVDM3-64, UC and SEC License P, FL-CUBEE-25
C3945-VSEC-CUBE/K9
Cisco 3945 Voice Sec and CUBE Bundle, PVDM3-64, UC and SEC License P, FL-CUBEE-25
C3925E-VSEC-CUBEK9
Cisco 3925E Voice Sec and CUBE Bundle, PVDM3-64, UC and SEC License P, FL-CUBEE-25
C3945E-VSEC-CUBEK9
Cisco 3945E Voice Sec and CUBE Bundle, PVDM3-64, UC and SEC License P, FL-CUBEE-25
Cisco 3900 Series Security Bundles1
CISCO3945E-SEC/K9
Cisco 3945E Security Bundle w/SEC license PAK
CISCO3925E-SEC/K9
Cisco 3925E Security Bundle w/SEC license PAK
CISCO3945-SEC/K9
Cisco 3945 Security Bundle w/SEC license PAK
CISCO3925-SEC/K9
Cisco 3925 Security Bundle w/SEC license PAK
Cisco 3900 Series Voice Bundles
CISCO3945E-V/K9
Cisco 3945E Voice Bundle, PVDM3-64, UC License PAK
CISCO3925E-V/K9
Cisco 3925E Voice Bundle, PVDM3-64, UC License PAK
CISCO3945-V/K9
Cisco 3945 Voice Bundle, PVDM3-64, UC License PAK
CISCO3925-V/K9
Cisco 3925 Voice Bundle, PVDM3-64, UC License PAK
C3945E-CME-SRST/K9
3945E Voice Bundle w/ PVDM3-64,FL-CME-SRST-25, UC License PAK
C3925E-CME-SRST/K9
3925E Voice Bundle w/ PVDM3-64,FL-CME-SRST-25, UC License PAK
C3945-CME-SRST/K9
3945 Voice Bundle w/ PVDM3-64,FL-CME-SRST-25, UC License PAK
C3925-CME-SRST/K9
3925 Voice Bundle w/ PVDM3-64,FL-CME-SRST-25, UC License PAK
Cisco 3900 Series Service Ready Engine Bundles1
C3945E-VSEC-SRE/K9
Cisco 3945E SRE Bundle, SRE 900 or SRE 910, PVDM3-64, UC and SEC License PAK
C3925E-VSEC-SRE/K9
Cisco 3925E SRE Bundle, SRE 900 or SRE 910, PVDM3-64, UC and SEC License PAK
C3945-VSEC-PSRE/K9
Cisco 3945 SRE Bundle, SRE 900 or SRE 910, PVDM3-64, UC and SEC License PAK
C3925-VSEC-PSRE/K9
Cisco 3925 SRE Bundle, SRE 900 or SRE 910, PVDM3-64, UC and SEC License PAK
C3945-VSEC-SRE/K9
Cisco 3945 SRE Bundle, SRE 700 or SRE 710, PVDM3-64, UC and SEC License PAK
C3925-VSEC-SRE/K9
Cisco 3925 SRE Bundle, SRE 700 or SRE 710, PVDM3-64, UC and SEC License PAK
Cisco 3900 Series UCS Express Bundles
C3945-WAAS-UCSE/K9
Cisco 3945, 2x SRE 900 or SRE 910, WAAS Enterprise Medium License, SRE-V License, 4GB
ISR RAM, 768 MB ISR CF, IMC Software
C3925-WAAS-UCSE/K9
Cisco 3925, 2x SRE 900 or SRE 910, WAAS Enterprise Medium License, SRE-V License, 4GB
ISR RAM, 768 MB ISR CF, IMC Software
C3945-ES24-UCSE/K9
Cisco 3945, SRE 900 or SRE 910, 24 port L3 ESM w/ PoE, 4 GB RAM, SRE-V License, 768 MB
ISR CF, IMC Software
C3925-ES24-UCSE/K9
Cisco 3925, SRE 900 or SRE 910, 24 port L2 ESM w/ PoE, 4 GB RAM, SRE-V License, 768 MB
ISR CF, IMC Software
C3945-UCSE/K9
Cisco 3945, SRE 900 or SRE 910, SRE-V License, 4 GB ISR RAM, 768 MB ISR CF, IMC Software
C3925-UCSE/K9
Cisco 3925, SRE 900 or SRE 910, SRE-V License, 4 GB ISR RAM, 768 MB ISR CF, IMC Software
Cisco 3900 Series WAAS Bundles
C3945-WAAS-SEC/K9
Cisco 3945, SRE 900 or SRE 910, SEC License PAK, WAAS Enterprise Large License
C3925-WAAS-SEC/K9
Cisco 3925, SRE 900 or SRE 910, SEC License PAK, WAAS Enterprise Large License
Select WAAS Express License Part Numbers
FL-C3900-WAAS-X
WAAS Express Feature License for Cisco 3900 Series
Chapter 1: Routing
1-9
Cisco 3900 Series Export Restriction Compliance License
(Required by U.S. Export regulations for more than 85Mbps throughput or 225 IPsec tunnels)
FL-39-HSEC-K9
1.
U.S. Export Restriction Compliance license for 3900 series
Additional HSEC license available for high performance/scale IPsec deployments
For More Information
http://www.cisco.com/go/3900
Cisco 2900 Series Integrated Services Routers
Cisco 2900 Series Integrated Services Routers (ISRs) are designed to
power the next phase of branch-office evolution, providing rich-media
collaboration and virtualization to the branch office while reducing
operating costs.
Cisco 2900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership.
The Integrated Services Routers Generation 2 (ISR G2) platforms are protected for future generations with
multicore CPUs, support for high-capacity digital signal processors (DSPs) known as PVDM 3 for higher
density voice services plus basic video conferencing capabilities, high-powered service modules with
improved availability, Gigabit Ethernet switching with enhanced Power over Ethernet (ePoE), and new energy
monitoring and control capabilities while enhancing overall system performance.
Additionally, a new Cisco IOS Software Universal image and Services Ready Engine (SRE) module enable you
to decouple the deployment of hardware and software, providing a flexible technology foundation that can
quickly adapt to evolving network requirements. Overall, the Cisco 2900 Series offers unparalleled total-costof-ownership (TCO) savings and network agility through the intelligent integration of market-leading security,
unified communications, wireless, and application services.
The routers include:
• Services on demand—The Cisco 2900 Series Integrated Services Routers reduce initial capital outlays by
decoupling the delivery of software from hardware on optional service modules. In addition, you receive a
Cisco IOS Software Universal image capable of enabling all of Cisco's rich Cisco IOS Software features and
allowing you to quickly deploy new services.
• Investment protection—The Cisco 2900 Series reduces deployment costs and increases flexibility. The
platform also offers investment protection with support for many existing ISR modules.
• The Cisco 2900 Series provides additional investment protection with Cisco Unified Border Element by
allowing enterprises to gracefully transition from legacy TDM Voice to IP-based Unified Communications
without the need for hardware upgrades.
• Energy efficiency—The Cisco 2900 Series architecture incorporates higher-efficiency power supplies with
intelligent power management, with full Cisco EnergyWise support in the future.
• High performance—The Cisco 2900 Series offers significant performance improvements over previousgeneration ISRs.
Overall, the Cisco 2900 Series offers unparalleled TCO savings and network agility through the intelligent
integration of security, wireless, unified communications, and application services.
Ideal for Companies That Need These Features
Cisco 2900 Series
• Delivers highly secure data, voice, video, and application services for small offices.
• Two or 3 integrated 10/100/1000 Ethernet ports with 1 port capable of RJ-45 or Small FormFactor Pluggable (SFP) connectivity
• Two service-module slots
• Four enhanced high-speed WAN interface card (EHWIC) slots
• Two or 3 onboard digital-signal-processor (DSP) slots
• One internal service-module slot for application services
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
and Cisco Enhanced PoE (ePoE)
Key Features and Benefits
The Cisco 2900 Series builds on the best-in-class offering of the existing Cisco 2800 Series Integrated
Services Routers by offering four platforms: Cisco 2901, 2911, 2921, and 2951 Integrated Services Routers.
All Cisco 2900 Series Integrated Services Routers offer embedded hardware encryption acceleration, voiceand video-capable digital-signal-processor (DSP) slots, optional firewall, intrusion prevention, call processing,
voicemail, and application services. In addition, the platforms support the industry’s widest range of wired and
wireless connectivity options such as T1/E1, T3/E3, xDSL, copper, and fiber Gigabit Ethernet.
Key architectural features of the Cisco 2900 Series include:
• Modular platform
- The Cisco 2900 Series ISRs are highly modular platforms with several types of module slots to add
connectivity and services for varied branch-office network requirements.
- The ISRs offer an industry-leading breadth of LAN and WAN connectivity options through modules to
accommodate field upgrades for future technologies without requiring a platform replacement.
• Processors
- The Cisco 2900 Series are powered by high-performance multi-core processors that can support the
growing demands of high-speed WAN connections to the branch-office while also running multiple
concurrent services.
1-10
Chapter 1: Routing
Chapter 1: Routing
1-11
Rout i ng
• Advanced security with embedded IP Security with Security Sockets Layer (IPSec/SSL) VPN hardware
acceleration
- Embedded hardware encryption acceleration is enhanced to provide higher scalability, which combined
with an optional Cisco IOS Security license, enables WAN link security and VPN services (both IPSec and
SSL acceleration). The onboard encryption hardware replaces and outperforms the advanced integration
modules (AIMs) of previous generations.
- The routers support Cisco Easy VPN (remote and server), Dynamic Multipoint VPN (DMVPN), Group
Encrypted VPN (GET VPN), and Secure Socket Layer VPN (SSL VPN). The 3900 Series routers support
Multiprotocol Label Switching (MPLS) VPNs. Specific provider-edge capabilities include Virtual Route
Forwarding (VRF) firewall and VRF IP Security (IPsec).
- More than 3700 intrusion-prevention-system (IPS) signatures are supported in Cisco IOS Software, with
the ability to load and enable selected IPS signatures. More than 4500 IPS signatures are available with
the optional high-performance intrusion-prevention-system (IPS) network module.
- Content Filtering includes URL/keyword blocking and features category-based productivity and security
ratings. This is a subscription-based hosted solution that leverages Trend Micro's global TrendLabs™
threat database, and is closely integrated with Cisco IOS Software.
- Cisco Configuration Professional comes standard on all Cisco 2900 Series Integrated Services Routers.
• WAN Optimization with WAAS Express
- Cisco Wide Area Application Services (WAAS) Express, based on Cisco IOS® Software and integrated
into the Cisco 2900 Series routers offers bandwidth optimization and application acceleration capabilities
in a cost-effective solution
- Fully integrated in Cisco IOS Software, with no additional hardware requirement (the maximum DRAM is
needed in the router). This integration allows significant savings in capital expenditures (CapEx) by
enabling a small-footprint branch-office deployment.
- Increases remote user productivity, reduces WAN bandwidth costs, and offers investment protection by
interoperating with existing Cisco WAAS infrastructure.
- Uniquely provides network transparency, improving deployment flexibility with on-demand service
enablement, and integrating with native Cisco IOS Software services such as security, NetFlow, and
quality of service (QoS).
- Fully interoperable with Cisco WAAS Modules for Services-Ready Engine (SRE) and Cisco WAAS
appliances and can be managed by a common Cisco WAAS Central Manager.
- Offers Context-Aware DRE for reduced latency and increased end-user experience.
- Organizations can enable Cisco WAAS Express as an on-demand service on the router and can expand to
the Cisco WAAS Modules for SRE or a dedicated Cisco WAAS appliance as business needs grow.
• WAN Optimization with Cisco Wide Area Application Services (WAAS) Software on Cisco Integrated
Services Routers Generation 2 (ISR G2)
- Cisco WAAS Software on Cisco 2900 Series provides router-integrated, on-demand WAN optimization
and application acceleration for branch offices.
- The Cisco Services Ready Engine (SRE) Modules on the ISR G2 platform, which decouple software
services from the underlying hardware, can deliver WAN optimization as an on-demand service as
required for business objectives and IT budget.
- Cisco WAAS Software is licensed with two types of feature capability for deployment on the Cisco SRE
Modules. The software licenses are common across Cisco SRE 700 SM, SRE 710 SM, SRE 900 SM, and
SRE 910 SM.
- Transport license—Supports WAN optimization features including Data Redundancy Elimination
(DRE), Lempel-Ziv (LZ) compression, and Transport Flow Optimization (TFO)
- Enterprise license—Includes Cisco WAAS Transport license functions (Data Redundancy Elimination
(DRE), Lempel-Ziv (LZ) compression, and Transport Flow Optimization (TFO)) plus application-specific
accelerations for protocols including Common Internet File System (CIFS), Messaging Application
Programming Interface (MAPI),
• Multi-gigabit fabric
- The Cisco 2900 Series introduces an innovative multi-gigabit fabric (MGF) that allows for efficient moduleto-module communication, enabling tighter services interactions across modules while reducing the
overhead on the route processor.
• TDM interconnectivity fabric
- Unified communications services in the branch office are significantly enhanced with the use of a TDM
interconnectivity fabric in the system architecture, allowing for scaling of DS-0 channel capacity.
• High-capacity, video-ready Packet Voice Video Digital Signal Processor Module (PVDM3)
- Enhanced architecture delivers a new packet-processing engine optimized for video and rich-media
applications, while concurrently supporting packet voice
- Enables scaling of high-definition (HD) voice capacity and is optimized for enhanced video capabilities
- Supports full suite of medianet features
• Integrated Gigabit Ethernet ports
- All onboard WAN ports are 10/100/1000 Gigabit Ethernet WAN routed ports.
- One of the three 10/100/1000 Ethernet WAN ports on the Cisco 2921 and 2951 supports Small FormFactor Pluggable (SFP)-based connectivity in lieu of a RJ-45 port and enabling fiber connectivity.
• Innovative USB-based console access
- A new, innovative USB console port offers management connectivity for devices without a serial port such
as modern laptop computers.
- Traditional console and auxiliary ports are also available.
• Optional integrated power supply for distribution of PoE and universal DC power supply
- An optional upgrade to the internal power supply provides inline power (802.3af-compliant PoE and Cisco
Inline Power) to integrated switch modules.
- On the Cisco 2911, 2921, and 2951, an optional DC power supply will be available in the future that extends
deployment into central offices and industrial environments.
• Optional external redundant power supply (RPS)
- The Cisco 2911, 2921, and 2951 allow for power redundancy through the use of an external RPS device,
thereby decreasing network downtime and protecting the network from power-supply failures.
- Redundant power on the Cisco 2900 Series is supported through the Cisco RPS 2300 Redundant Power
System. You can use the Cisco RPS 2300 to provide redundant power for Cisco 2900 Series ISRs as well
as Cisco Catalyst switches.
- To use the Cisco RPS 2300, an external RPS adapter is required (configurable option) to connect the
platform to the external RPS.
• PoE boost
- When connected to an external RPS device, the Cisco 2911, 2921, and 2951 can operate in a PoE boost
configuration in lieu of redundant power mode, whereby the power capacity of the platform is increased
to twice the normal level to power additional PoE ports.
• Designed for flexible deployments
- The Cisco 2911 and 2951 are designed for NEBS environments
- The 2911 is 12” deep and has an optional fan filter for deployments in a variety of environments. An
assembly that provides front-to-back airflow is also available for 23” racks.
Specifications
Services and Slot Density
Cisco 2901
Cisco 2911
Cisco 2921
Cisco 2951
Embedded hardware-based cryptography
acceleration (IPSec + SSL)
Yes
Yes
Yes
Yes
Cisco Unified SRST Sessions
35
50
100
250
Cisco Unified CCME Sessions
35
50
100
150
Total onboard WAN 10/100/1000 Ports
2
3
3
3
RJ-45-based ports
2
3
3
3
SFP-based ports (use of SFP port disables
the corresponding RJ-45 port)
0
0
1
1
Service Module slots
0
1
1
2
Double-wide Service Module slots (use of a 0
double-wide slot will occupy all single-wide
service module slots in a 2900)
0
1
1
EHWIC slots
4
4
4
4
Double-wide EHWIC slots (use of a double- 2
wide EHWIC slot will consume two EHWIC
slots)
2
2
2
ISM slots
1
1
1
1
Onboard DSP (PVDM) slots
2
2
3
3
Memory DDR2 ECC DRAM - Default
512 MB
512 MB
512 MB
512 MB
Memory (DDR2 ECC DRAM) - Maximum
2 GB
2 GB
2 GB
2 GB
Compact Flash (external) - Default
slot 0: 256 MB
slot 1: none
slot 0: 256 MB
slot 1: none
slot 0: 256 MB
slot 1: none
slot 0: 256 MB
slot 1: none
Compact Flash (external) - Maximum
slot 0: 4 GB
slot 1: 4 GB
slot 0: 4 GB
slot 1: 4 GB
slot 0: 4 GB
slot 1: 4 GB
slot 0: 4 GB
slot 1: 4 GB
External USB 2.0 flash memory slots (Type
A)
2
2
2
2
USB Console port (Type B) (up to 115.2
kbps)
1
1
1
1
Serial console port
1
1
1
1
Serial auxiliary port
1
1
1
1
Power-supply options
AC and PoE
AC, PoE, and DC
AC, PoE, and DC
AC, PoE, and DC
RPS support (External)
No
Cisco RPS 2300
Cisco RPS 2300
Cisco RPS 2300
WAN Optimization with WAAS Express
Yes
Yes
Yes
Yes
Optimized TCP Connections with WAAS
Express
150
250
250
500
WAS Capacity with WAAS Express
6 Mbps
6 Mbps
6 Mbps
10 Mbps
DRAM Required for WAAS Express
2.5 GB
2.5 GB
2.5 GB
4 GB
Power Specifications
1-12
Chapter 1: Routing
100 to 240 VAC
auto ranging
100 to 240 VAC
auto ranging
100 to 240 VAC
auto ranging
100 to 240 VAC
auto ranging
AC input frequency
47 to 63 Hz
47 to 63 Hz
47 to 63 Hz
47 to 63 Hz
AC input current range AC power supply
(maximum)
1.5 to 0.6A
2.2 to 1.0A
3.4 to 1.4A
3.4 to 1.4A
AC input surge current
<50A
<50A
<50A
<50A
Typical Power (no modules) (Watts)
40
50
60
70
Maximum Power with AC power supply
(Watts)
150
210
320
340
Maximum Power with PoE power supply
(platform only) (Watts)
175
250
370
405
Maximum end-point PoE power available
from PoE power supply (Watts)
130
200
280
370
Maximum end-point PoE power capacity
with PoE Boost (Watts)
N/A
750
750
750
Dimensions (H x W x D)
1.75 x 17.25 x 17.3
in. (44.5 x 438.2 x
439.4 mm)
3.5 x 17.25 x 12 in. 3.5 x 17.25 x 18.5
(88.9 x 438.2 x
in. (88.9 x 438.2 x
304.8 mm)
469.9 mm)
Rack height
1RU (rack unit)
2RU
2RU
2RU
Rack-mount 19in. (48.3 cm) EIA
included
included
included
included
Rack Mount 23in. (58.4 cm) EIA
optional
optional
optional
optional
Wall-mount (refer to installation guide for
approved orientation)
Yes
Yes
No
No
Weight with AC power supply (no modules) 13.4 lb (6.1 kg)
18 lb (8.2 kg)
29 lb (13.2 kg.)
29 lb (13.2 kg)
Weight with AC PoE power supply (no
modules)
14.3 lb (6.5 kg)
19 lb (8.6 kg)
30 lb (13.6 kg)
30 lb (13.6 kg)
Typical weight fully configured
16 lb (7.3 kg)
21 lb (9.5 kg)
34 lb (15.5 kg)
34 lb (15.5 kg)
Airflow
Front to side
Side to side
Front to back
Front to back
Optional Airflow Kit
N/A
Front to back
N/A
N/A
Physical Specifications
3.5 x 17.25 x 18.5
in. (88.9 x 438.2 x
469.9 mm)
Online model comparison chart: http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html
Selected Part Numbers and Ordering Information
Cisco 2900 Series Router
CISCO2951/K9
Cisco 2951 w/3 GE,4 EHWIC, 3 DSP, 2 SM, 256MB CF,512MB DRAM,IPB
CISCO2921/K9
Cisco 2921 w/3 GE,4 EHWIC, 3 DSP,1 SM, 256MB CF,512MB DRAM,IPB
CISCO2911/K9
Cisco 2911 w/3 GE,4 EHWIC, 2 DSP,1 SM, 256MB CF,512MB DRAM,IPB
CISCO2901/K9
Cisco 2901 w/2 GE,4 EHWIC, 2 DSP, 256MB CF,512MB DRAM,IPB
Cisco 2900 Series Security Bundles1
CISCO2951-SEC/K9
Cisco 2951 Security Bundle w/SEC license PAK
CISCO2921-SEC/K9
Cisco 2921 Security Bundle w/SEC license PAK
CISCO2911-SEC/K9
Cisco 2911 Security Bundle w/SEC license PAK
CISCO2901-SEC/K9
Cisco 2901 Security Bundle w/SEC license PAK
Cisco 2900 Series Voice Bundles1
CISCO2951-V/K9
Cisco 2951 Voice Bundle, PVDM3-32, UC License PAK
CISCO2921-V/K9
Cisco 2921 Voice Bundle, PVDM3-32, UC License PAK
CISCO2911-V/K9
Cisco 2911 Voice Bundle, PVDM3-16, UC License PAK
CISCO2901-V/K9
Cisco 2901 Voice Bundle, PVDM3-16, UC License PAK
C2951-CME-SRST/K9
2951 Voice Bundle w/ PVDM3-32,FL-CME-SRST-25, UC License PAK
C2921-CME-SRST/K9
2921 Voice Bundle w/ PVDM3-32,FL-CME-SRST-25, UC License PAK
C2911-CME-SRST/K9
2921 Voice Bundle w/ PVDM3-16,FL-CME-SRST-25, UC License PAK
Chapter 1: Routing
1-13
Rout i ng
AC input voltage
C2901-CME-SRST/K9
2901 Voice Bundle w/ PVDM3-16,FL-CME-SRST-25, UC License PAK
Cisco 2900 Series Secure Voice Bundles1
C2951-VSEC/K9
Cisco 2951 Voice Sec. Bundle, PVDM3-32, UC and SEC License PAK
C2921-VSEC/K9
Cisco 2921 Voice Sec. Bundle, PVDM3-32, UC and SEC License PAK
C2911-VSEC/K9
Cisco 2911 Voice Sec. Bundle, PVDM3-16, UC and SEC License PAK
C2901-VSEC/K9
Cisco 2901 Voice Sec. Bundle, PVDM3-16, UC and SEC License PAK
Cisco 2900 Series Secure Voice plus CUBE Bundles1
C2901-VSEC-CUBE/K9
Cisco 2901 Voice Sec and CUBE Bundle, PVDM3-16, UC and SEC License P, FL-CUBEE-25
C2911-VSEC-CUBE/K9
Cisco 2911 Voice Sec and CUBE Bundle, PVDM3-16, UC and SEC License P, FL-CUBEE-25
C2921-VSEC-CUBE/K9
Cisco 2921 Voice Sec and CUBE Bundle, PVDM3-32, UC and SEC License P, FL-CUBEE-25
C2951-VSEC-CUBE/K9
Cisco 2951 Voice Sec and CUBE Bundle, PVDM3-32, UC and SEC License P, FL-CUBEE-25
Cisco 2900 Services Ready Engine Bundles1
C2951-VSEC-PSRE/K9
Cisco 2951 SRE Bundle, SRE 910, PVDM3-32, UC and SEC License PAK
C2951-VSEC-SRE/K9
Cisco 2951 SRE Bundle, SRE 700 or SRE 710, PVDM3-32, UC and SEC License PAK
C2921-VSEC-PSRE/K9
Cisco 2921 SRE Bundle, SRE 910, PVDM3-32, UC and SEC License PAK
C2921-VSEC-SRE/K9
Cisco 2921 SRE Bundle, SRE 700 or SRE 710, PVDM3-32, UC and SEC License PAK
C2911-VSEC-PSRE/K9
Cisco 2911 SRE Bundle, SRE 910, PVDM3-16, UC and SEC License PAK
C2911-VSEC-SRE/K9
Cisco 2911 SRE Bundle, SRE 300, PVDM3-16, UC and SEC License PAK
C2901-VSEC-SRE/K9
Cisco 2901 SRE Bundle, SRE 300, PVDM3-16, UC and SEC License PAK
Cisco 2900 Series UCS Express Bundles
C2951-WAAS-UCSE/K9
Cisco 2951, 2x SRE 900 or SRE 910, WAAS Enterprise Medium License, SRE-V License, 4GB
ISR RAM, 768 MB ISR CF, IMC Software
C2951-ES24-UCSE/K9
Cisco 2951, SRE 900 or SRE 910, 24 port L2 ESM, 4 GB ISR RAM, SRE-V License, 768 MB ISR CF,
IMC Software
C2951-UCSE/K9
Cisco 2951, SRE 900 or SRE 910, SRE-V License, 4 GB ISR RAM, 768 MB ISR CF, IMC Software
C2921-UCSE/K9
Cisco 2921, SRE 900 or SRE 910, SRE-V License, 2.5 GB ISR RAM, 768 MB ISR CF, IMC Software
C2911-UCSE/K9
Cisco 2911, SRE 900 or SRE 910, SRE-V License, 2.5 GB ISR RAM, 768 MB ISR CF, IMC Software
Cisco 2900 Series WAAS Bundles
C2951-WAAS-SEC/K9
Cisco 2951, SRE 900 or SRE 910, SEC License PAK, WAAS Enterprise Large License
C2921-WAAS-SEC/K9
Cisco 2921, SRE 700 or SRE 710, SEC License PAK, WAAS Enterprise Medium License
C2911-WAAS-SEC/K9
Cisco 2911, SRE 700 or SRE 710, SEC License PAK, WAAS Enterprise Small License
Cisco 2900 Series Security and WAAS Express Bundles
C2951-WAASX-SEC/K9
Router Bundle—C2951, WAASX F-License, Sec License, Max Mem
C2921-WAASX-SEC/K9
Router Bundle—C2921, WAASX F-License, Sec License, Max Mem
C2911-WAASX-SEC/K9
Router Bundle—C2911, WAASX F-License, Sec License, Max Mem
C2901-WAASX-SEC/K9
Router Bundle—C2901, WAASX F-License, Sec License, Max Mem
Cisco 2900 Series WAAS Express Bundles
C2951-WAASX/K9
Router Bundle—C2951, WAASX Feature License, Max Mem
C2921-WAASX/K9
Router Bundle—C2921, WAASX Feature License, Max Mem
C2911-WAASX/K9
Router Bundle—C2911, WAASX Feature License, Max Mem
C2901-WAASX/K9
Router Bundle—C2901, WAASX Feature License, Max Mem
Cisco 2900 Series Export Restriction Compliance License
(Required by U.S. Export regulations for more than 85Mbps throughput or 225 IPsec tunnels)
FL-29-HSEC-K9
1.
U.S. Export Restriction Compliance license for 2921/2951
Additional HSEC license available on 2921/2951 for high performance/scale IPsec deployments
For More Information
http://www.cisco.com/go/2900
1-14
Chapter 1: Routing
Rout i ng
Cisco 1900 Series Integrated Services Routers
The Cisco 1900 Series Integrated Services Router portfolio
constitutes the entry-level, highly secure solution for WAN
deployments, offering service virtualization and low total cost of
ownership (TCO). The Cisco 1900 Series is ideal for small offices
requiring modular flexibility for highly secure mobility and
customizable applications with circuit-speed performance up to 25
Mbps with concurrent services.
The Cisco 1900 Series offers a factory-selectable 802.11n access point and a doublewide high-speed WAN
interface. Cisco 1900 Series Integrated Services Routers build on 25 years of Cisco innovation and product
leadership. The new platforms are architected to enable the next phase of branch-office evolution, providing
rich-media collaboration and virtualization to the branch office while maximizing operational cost savings. The
Cisco Integrated Services Routers Generation 2 (ISR G2) platforms are protected for future versions with multicore CPUs, Gigabit Ethernet switching with enhanced Power over Ethernet (ePoE), and new energy monitoring
and control capabilities while enhancing overall system performance.
Additionally, a new Cisco IOS Software Universal image and Services Ready Engine module enable you to
decouple the deployment of hardware and software, providing a stable technology foundation that can quickly
adapt to evolving network requirements. Overall, the Cisco 1900 Series offers unparalleled TCO savings and
network agility through the intelligent integration of market-leading security, unified communications, wireless,
and application services.
The Cisco 1900 Series builds on the best-in-class offering of the existing Cisco 1841 Integrated Services
Routers by offering three models—the Cisco 1941, 1941W, and 1921. In addition to the support of a wide range
of wireless and wired connectivity options supported on Cisco 1941 Series, the Cisco 1941W offers integration
of a IEEE 802.11n access point that is backward-compatible with IEEE 802.11a/b/g access points.
All Cisco 1900 Series Integrated Services Routers offer embedded hardware encryption acceleration, optional
firewall, intrusion prevention, and application services. In addition, the platforms support the industry’s widest
range of wired and wireless connectivity options such as T1/E1, xDSL, third generation (3G), and Gigabit
Ethernet.
The routers offer:
• Services on demand—The Cisco 1900 Series Integrated Services Routers reduce initial capital outlays by
decoupling the delivery of software from hardware on optional service modules. In addition, you receive a
Cisco IOS Software Universal image capable of enabling all of Cisco's rich Cisco IOS Software features and
allowing you to quickly deploy new services. The Cisco Services Ready Engine (SRE) on the Cisco 1941
enables a new operational model that allows you to reduce capital expenditures (CapEx) and deploy a
variety of application services such as WAAS for WAN optimization as needed on a single integrated
compute services module.
• Investment protection—The Cisco 1900 Series reduces deployment costs and increases flexibility. The
platform also offers investment protection with support for many existing ISR modules.
• Energy efficiency—The Cisco 1900 Series architecture includes higher-efficiency power supplies with
intelligent power management, with full Cisco EnergyWise feature support in the future.
• High performance—The Cisco 1900 Series offers significant performance improvements over previousgeneration ISRs.
Overall, the Cisco 1900 Series offers unparalleled TCO savings and network agility through the intelligent
integration of security, wireless, and application services.
Ideal for Companies That Need These Features
Cisco 1900
•
•
•
•
•
•
Delivers highly secure data and application services for small offices and branch offices
Two 10/100/1000 Ethernet ports
Two enhanced high-speed WAN interface card (EHWIC) slots
One internal service-module slot for application services (Cisco 1941)
Integrated 802.11a/g/n access point (Cisco 1941W)
Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
and Cisco Enhanced PoE (ePoE)
Cisco 1921
• Two integrated 10/100/1000 Ethernet ports
• Two enhanced High-Speed WAN Interface Card (EHWIC) slots that can host two single-wide or
one double-wide EHWIC modules
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
and Cisco Enhanced PoE
• Security
Cisco 1941W/1941
• Two integrated 10/100/1000 Ethernet ports
• Two Enhanced High-Speed WAN Interface Card slots that can host two single-wide or one
double-wide and one single-wide (e)HWIC
• One integrated 802.11n Wireless Access Point/1 Internal Services Module slot
• Fully integrated power distribution to modules supporting 802.3af Power over Ethernet (PoE)
and Cisco Enhanced PoE
Chapter 1: Routing
1-15
Key Features and Benefits
The Cisco 1900 Series is architected to meet the application demands of today's branch offices with design
flexibility for future applications. The modular architecture is designed to support expanding customer
requirements, increased bandwidth, and fully integrated power distribution to modules supporting 802.3af
Power over Ethernet (PoE) and Cisco Enhanced PoE (ePoE).
Key architectural features include:
• Modular platform
- The Cisco 1900 Series ISR are highly modular platforms with multiple module slots to provide
connectivity and services for varied branch network requirements.
- The ISRs offer an industry-leading breadth of LAN and WAN connectivity options through modules to
accommodate field upgrades to future technologies without requiring replacement of the platform.
• Processors
- The Cisco 1900 Series is powered by high-performance multi-core processors that support growing
demands of branch office networks by supporting high throughput WAN requirements.
• MultiGigabit fabric
- The Cisco 1941 model in the Cisco 1900 Series introduces an innovative MultiGigabit Fabric (MGF)
which allows for efficient module to module communication, enabling direct services interactions across
modules while reducing the overhead on the router processor.
• Embedded IPSec/SSL VPN hardware acceleration
- Embedded hardware encryption acceleration is enhanced to provide higher scalability, which, combined
with an optional Cisco IOS Security license, enables WAN link security and VPN services (Both IPSec
and SSL acceleration).
- The onboard encryption hardware out-performs the Advanced Integration Modules of previous
generations.
- The routers support Cisco Easy VPN (remote and server), Dynamic Multipoint VPN (DMVPN), Group
Encrypted VPN (GET VPN), and Secure Socket Layer VPN (SSL VPN).
- More than 3700 intrusion-prevention-system (IPS) signatures are supported in Cisco IOS Software, with
the ability to load and enable selected IPS signatures.
- Content Filtering includes URL/keyword blocking and features category-based productivity and security
ratings. This is a subscription-based hosted solution that leverages Trend Micro's global TrendLabs™
threat database, and is closely integrated with Cisco IOS Software.
- Cisco Configuration Professional comes standard on all Cisco 1900 Series Integrated Services Routers.
• Integrated Gigabit Ethernet Ports
- All onboard WAN ports are 10/100/1000 Gigabit Ethernet WAN routed ports.
- Innovative universal-serial-bus (USB)-based console access
- A new, innovative, mini-B USB console port supports management connectivity when traditional serial
ports are not available.
- The traditional console and auxiliary ports are also available. Either the USB-based console or the RJ-45based console port can be used to configure the router.
• Optional power supply for distribution of power over Ethernet (PoE)
- An optional power supply (internal in Cisco 1941 and external in Cisco 1921) provides in-line power
(802.3af-compliant Power-over-Ethernet [PoE] and Cisco standard inline power) to optional integrated
switch modules.
• Integrated wireless LAN
- The Cisco 1941W offers a secure integrated access point in a single device.
- Integrated access point is based on the IEEE 802.11n draft 2.0 standard that uses MIMO (Multi-Input,
Multiple-output) to improve coverage for existing 802.11a/ b/g clients and new 802.11n clients.
- The Cisco 1941W supports dual radios-802.11 b/g/n and 802.11a/n and is capable of operating in both
autonomous and unified modes.
• WAN Optimization with WAAS Express
- Cisco Wide Area Application Services (WAAS) Express, based on Cisco IOS Software and integrated into
the Cisco 1941 router offers bandwidth optimization and application acceleration capabilities in a costeffective solution
- Fully integrated in Cisco IOS Software, with no additional hardware requirement (the maximum DRAM is
needed in the router). This integration allows significant savings in capital expenditures (CapEx) by
enabling a small-footprint branch-office deployment.
- Increases remote user productivity, reduces WAN bandwidth costs, and offers investment protection by
interoperating with existing Cisco WAAS infrastructure.
- Uniquely provides network transparency, improving deployment flexibility with on-demand service
enablement, and integrating with native Cisco IOS Software services such as security, NetFlow, and
quality of service (QoS).
- Fully interoperable with Cisco WAAS Modules for Services-Ready Engine (SRE) and Cisco WAAS
appliances and can be managed by a common Cisco WAAS Central Manager.
- Offers Context-Aware DRE for reduced latency and increased end-user experience.
- Organizations can enable Cisco WAAS Express as an on-demand service on the router and can expand
to the Cisco WAAS Modules for SRE or a dedicated Cisco WAAS appliance as business needs grow.
Specifications
Services and Slot Density
Cisco 1941, Cisco 1941W
Cisco 1921
Embedded hardware-based Yes
crypto acceleration
(IPSec + SSL)
Yes
Total Onboard LAN
10/100/1000
2
1-16
Chapter 1: Routing
2
2
2
EHWIC Slots
2
2
Double-Wide EHWIC slots
(use of a double-wide
EHWIC slot will consume
two EHWIC slots)
1
1
ISM Slots
1 (0 on the Cisco 1941W)
0
Memory (DDR2 DRAM) Default
512 MB
512 MB
Memory (DDR2 DRAM) Maximum
2.0 GB
512 MB
Compact Flash—Default
External
slot 0: 256 MB
slot 1: none
Internal
256 MB
Compact Flash—Maximum
External
slot 0: 4 GB
slot 1: 4 GB
Internal
256 MB
External USB flash memory
slots (Type A)
2
1
USB Console Port (Type B)
(up to 115.2 kbps)
1
1
Serial Console Port (up to
115.2 kbps)
1
1
Serial Auxiliary Port (up to
115.2 kbps
1
1
Power Supply Options
AC, PoE (Internal)
AC, PoE
Redundant Power Supply
Support
No
No
WAN Optimization with
WAAS Express
Yes
No
Rout i ng
RJ-45-Based Ports
Optimized TCP Connections 150
with WAAS Express
WAS Capacity with WAAS
Express
4 Mbps
DRAM Required for WAAS
Express
2.5 GB
Power Specifications
AC Input Voltage
100–240 V ~
100–240 V ~
AC Input Frequency
47–63 Hz
47–63 Hz
AC Input Current range AC 1.5–0.6
Power Supply (Max) (Amps)
1.5–0.6
AC Input Surge Current
<50 A
<50 A
Typical Power (No Modules) 35 W
25W
Maximum Power capacity
with AC power supply
110 W
60 W
Maximum Power capacity
with PoE power supply
(platform only)
110 W
70 W
Maximum PoE device power 80 W
capacity with PoE power
supply
80 W
Physical Specifications
Dimensions (H x W x D)
3.5 in x 13.5 in x 11.5 in
1.75 in x 13.5 in x 11.5 in
Rack Height
2 RU
1 RU
Rack-mount 19in. (48.3 cm) Included
EIA
Optional
Wall-mount (refer to
installation guide for
approved orientation)
Yes
Yes
Chapter 1: Routing
1-17
Weight-with AC power
supply (no modules)
12 lbs
7 lb
Weight-with PoE power
supply (no modules)
12.8 lbs
7 lbs (external PoE)
Maximum Weight-Fully
Configured
14 lbs
8 lbs
Airflow
Front to Side
Back to side
Cisco 1941W WLAN Specifications
WLAN hardware
WLAN software features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Unified WLAN management •
•
•
•
•
IEEE 802.11n draft 2.0 standards-based access point with 802.11a/ b/g compatibility
Automatic rate selection for 802.11a/g/n
Dual radios for 802.11b/g/n and 802.11a/n modes.
RP-TNC connectors for field-replaceable external antennas
2-dB default antenna gain
2 x 3 multiple input, multiple output (MIMO) radio operation
Wi-Fi 802.11n Draft v2.0 certified
Autonomous or unified access point
Cisco WCS support for monitoring of autonomous-mode access points
Option to maximize throughput or maximize range
Software-configurable transmit power
Radio roles, including access point, root bridge, non-root bridge, and workgroup bridge
Wi-Fi Multimedia (WMM) certification
Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is
maintained
Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency
Unified access point features:
Supported by wireless LAN controller and Cisco WCS
Configurable local or central switching for HREAP mode
Radio management through Cisco WCS
Transparent roaming with mobility groups
Certifications
Service Set Identifiers
(SSIDs)
16
Wireless VLANs
16
WLAN security features
• Standard 802.11i
• Wi-Fi Protected Access (WPA) and AES (WPA2)
• EAP authentication: Cisco LEAP, PEAP, Extensible Authentication Protocol Transport Layer
Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure
Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module
(EAP-SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and
Extensible Authentication Protocol-Tunneled TLS (EAP-TTLS)
• Static and dynamic Wired Equivalent Privacy (WEP)
• Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
• MAC authentication and filter
• User database for survivable local authentication using LEAP and EAP-FAST
• Configurable limit to the number of wireless clients
• Configurable RADIUS accounting for wireless clients
• Pre-Shared Keys (PSKs) (WPA-small office or home office [WPA-SOHO])
Encrypted wireless VLANs
16
Multiple Broadcast Service
Set Identifiers (MBSSIDs)
16
Online model comparison chart: http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html
Cisco 1900 Series supports a wide range of modules that span an industry-leading breadth of services at the branch office.
Please refer to the following link for the list of modules supported on the Cisco 1900:
http://cisco.com/en/US/products/ps1900/products_relevant_interfaces_and_modules.html.
Selected Part Numbers and Ordering Information
Cisco 1900 Series Router
CISCO1941/K9
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF,512MB DRAM,IP Base
CISCO1921/K9
CISCO 1921 Modular Router, 2 GE, 2 EHWIC slots, 256F/512D, IP Base
Cisco 1900 Series Wireless Bundles
CISCO1941W-A-N-SEC/K9
Cisco 1941 Router w/ 802.11 a/b/g/n FCC Compliant WLAN ISM, SEC Lic
CISCO1941W-E-N-SEC/K9
Cisco 1941 Router w/ 802.11 a/b/g/n ETSI WLAN ISM, SEC Lic
1-18
Chapter 1: Routing
Cisco 1941 Router w/ 802.11 a/b/g/n FCC Compliant WLAN ISM
CISCO1941W-C/K9
Cisco 1941 Router w/802.11 a/b/g/n China Compliant WLAN ISM
CISCO1941W-E/K9
Cisco 1941 Router w/ 802.11 a/b/g/n ETSI Compliant WLAN ISM
CISCO1941W-P/K9
Cisco 1941 Router w/ 802.11 a/b/g/n Japan Compliant WLAN ISM
CISCO1941W-N/K9
Cisco 1941 Router w/802.11 a/b/g/n Aus, NZ Compliant WLAN ISM
CISCO1941/K9
Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF,512MB DRAM,IP Base
CISCO1921/K9
CISCO 1921 Modular Router, 2 GE, 2 EHWIC slots, 256F/512D, IP Base Lic
Rout i ng
CISCO1941W-A/K9
Cisco 1900 Series Security Bundles
CISCO1941-SEC/K9
Cisco 1941 Security Bundle w/SEC license PAK
Cisco1921-T1SEC/K9
Cisco 1921 SEC T1 Bundle incl. HWIC-1DSU-T1, 256F/512D, SEC Lic
CISCO1921-SEC/K9
CISCO 1921 Modular Router, 2 GE, 2 EHWIC slots, 256F/512D,
SEC Lic
WAAS Express License for the Cisco 1941 Router
FL-C1941-WAASX
WAAS Express Feature License for Cisco 1941
Cisco 1900 Series DSL Bundles
C1921-4SHDSL/K9
CISCO 1921 ADSL Annex M, 3G HSPA Bundle, 256F/512D, SEC Lic
C1921-ADSL2-M/K9
Cisco 1921 ADSL2 Annex M Bundle, HWIC-1ADSL-M, 256F/512D, IP Base Lic
CISCO1921-ADSL2/K9
Cisco 1921 ADSL2+ Bundle, HWIC-1ADSL, 256F/512D, IP Base Lic
Cisco 1900 Services Ready Engine Bundles
C1941-SEC-SRE/K9
Cisco 1941, SRE 300, SEC License PAK
For More Information
http://www.cisco.com/go/1900
Cisco 800 Series Integrated Services Routers
Cisco 800 Series Integrated Services Routers are fixed-configuration
routers that provide collaborative business solutions for secure voice and
data communication to small businesses and enterprise teleworkers. They
offer concurrent broadband services over third-generation (3G), Metro
Ethernet, and multiple DSL technologies to provide business continuity.
Wireless 802.11n and 3G offer LAN and WAN mobility. The routers provide
the performance required for concurrent services, including firewall, intrusion prevention, content filtering, and
encryption for VPNs; optional 802.11g/n for mobility; and quality-of-service (QoS) features for optimizing voice
and video applications. In addition, the web-based Cisco Configuration Professional configuration tool simplifies
setup and deployment. Centralized management capabilities give network managers visibility and control of the
network configurations at the remote site.
Ideal for Companies That Need These Features
Cisco 800
• Ethernet ports with VLAN support, Metro Ethernet support
• WAN connectivity, including Ethernet, SFP, multimode VDSL2/ADSL2/2+, G.SHDSL, 3G/3.5G/
3.7G, ISDN Basic Rate Interface (BRI), and V.92
• Advanced security including Firewall, Intrusion Prevention, Content Filtering, Encryption for
VPN, and ScanSafe support
• Wireless LAN (802.11 a/g/n) access points
• Quality of service (QoS) features for optimizing voice and video applications
• Unified Communications survivability (SRST) and Cisco Unified Border Element (CUBE) in a
small form factor
Key Features and Benefits
Cisco 860 Series Integrated Services Routers offer:
• Concurrent broadband services for small offices, and remote sites
• Secure connectivity with Stateful Inspection Firewall and IP Security (IPSec) VPN support for small offices
• Security features including:
• Stateful Inspection Firewall
• P Security (IPSec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES])
• 4-port 10/100 Fast Ethernet managed switch with VLAN support
• CON/AUX port for console or external modem
Chapter 1: Routing
1-19
• Secure 802.11g/n access point option based on IEEE 802.11n draft 2.0 standard with support for
autonomous WLAN architecture
• Easy setup, deployment, and remote management capabilities through web-based tools and Cisco IOS®
Software
Cisco 880 Series Integrated Services Routers offer:
• High performance for broadband access in small offices and small branch-office and teleworker sites
• Collaborative services with secure analog, digital voice, and data communication
• Business continuity and WAN diversity with redundant WAN links: Fast Ethernet, G.SHDSL, Multi-Mode
VDSL2 and ADSL2/2+, 3G/3.5G/3.7G (including Embedded), and ISDN
• Survivable Remote Site Telephony (SRST) voice continuity for enterprise small branch-office and
teleworker sites
• Cisco Unified Border Element (CUBE) IP-IP Voice gateway functionality for connecting to SIP trunking
services as a replacement for PRI or FXO voice connectivity to the service provider.
• Up to 15 sessions of Cisco Unified Border Element (CUBE) IP-IP Voice gateway functionality for connecting
to SIP trunking services as a replacement for PRI or FXO voice connectivity to the Service Provider.
• Enhanced security, including:
- Firewall with advance application and control for email, instant messaging (IM), and HTTP traffic
- Site-to-site remote-access and dynamic VPN services—IP Security (IPsec) VPNs (Triple Data Encryption
Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN (DMVPN), Group
Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer (SSL) VPN
- Intrusion prevention system (IPS)—An inline, deep-packet inspection feature that effectively mitigates a
wide range of network attacks
- Content filtering—A subscription-based integrated security solution that offers category-based
reputation rating; keyword blocking; and protection against adware, malware, spyware, and URL blocking
• Four-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet
(PoE) for powering IP phones or external access points
• Secure 802.11g/n access point option based on draft 802.11n standard with support for autonomous or
Cisco Unified WLAN architectures
• CON/AUX port for console or external modem
• One USB 1.1 port for security eToken credentials, booting from USB, loading configuration
• Easy setup, deployment, and remote-management capabilities through web-based tools and Cisco IOS®
Software
Cisco 890 Series Integrated Services Routers are fixed-configuration routers that provide collaborative
business solutions for secure voice and data communications to enterprise small branch offices. They are
designed to deliver secure broadband, Metro Ethernet, wireless LAN (WLAN) connectivity, and business
continuity. The routers also come with powerful management tools, such as the web-based Cisco
Configuration Professional configuration management tool, which simplifies setup and deployment.
Centralized management capabilities give network managers visibility and control of the network
configurations at the remote site.
Cisco 890 Series Integrated Services Routers offer:
• High performance for secure broadband and Metro Ethernet access with concurrent services for
enterprise small branch offices
• Business continuity and WAN diversity with redundant WAN links: SFP, Fast Ethernet, V.92, and ISDN Basic
Rate Interface (BRI)
• Integrated secure 802.11a/g/n access point (optional) based on the 802.11n standard; dual-band radios for
mobility and support for autonomous or Cisco Unified WLAN architectures
• Enhanced security including:
- Firewall with advance application and control for email, instant messaging (IM), and HTTP traffic
- Site-to-site remote-access and dynamic VPN services: IP Security (IPsec) VPNs (Triple Data Encryption
Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN [DMVPN], Group
Encrypted Transport VPN [GET VPN] with onboard acceleration, and Secure Sockets Layer [SSL] VPN
- Intrusion prevention system (IPS)—An inline, deep-packet-inspection feature that mitigates a wide range
of network attacks
- Content filtering—A subscription-based integrated security solution that offers category-based
reputation rating, keyword blocking, and protection against adware, malware, spyware, and URL blocking
• WAN Optimization with WAAS Express
- Cisco Wide Area Application Services (WAAS) Express, based on Cisco IOS Software and integrated into
the Cisco 880 3G, 891, and 892 routers offers bandwidth optimization and application acceleration
capabilities in a cost-effective solution
- Fully integrated in Cisco IOS Software, with no additional hardware requirement (the maximum DRAM is
needed in the router). This integration allows significant savings in capital expenditures (CapEx) by
enabling a small-footprint branch-office deployment.
- Increases remote user productivity, reduces WAN bandwidth costs, and offers investment protection by
interoperating with existing Cisco WAAS infrastructure.
- Uniquely provides network transparency, improving deployment flexibility with on-demand service
enablement, and integrating with native Cisco IOS Software services such as security, NetFlow, and
quality of service (QoS).
- Fully interoperable with Cisco WAAS Modules for Services-Ready Engine (SRE) and Cisco WAAS
appliances and can be managed by a common Cisco WAAS Central Manager.
- Offers Context-Aware DRE for reduced latency and increased end-user experience.
- Organizations can enable Cisco WAAS Express as an on-demand service on the router and can expand
to the Cisco WAAS Modules for SRE or a dedicated Cisco WAAS appliance as business needs grow.
• An 8-port 10/100 Fast Ethernet managed switch with VLAN support and 4-port support for Power over
Ethernet (PoE) (optional) to power IP phones or external access points
• Metro Ethernet features include:
1-20
Chapter 1: Routing
Specifications
Cisco 888/
888E
Fixed LAN Port
Connections
4-port 10/100 4-port 10/100 4-port 10/100 4-port 10/100 8-port 10/100 8-port 10/100
Ethernet switch Ethernet switch Ethernet switch Ethernet switch Ethernet switch Ethernet
switch
PoE
No
Optional 2-port Optional 2-port Optional 2-port Optional 4-port Optional 4port
Fixed WAN Port
Connections
1-port 10/100
Ethernet
1-port 10/100
Ethernet
887VA: 1-port
Multi-mode
VDSL2 and
ADSL2/2+,
annex A
887VA-M: 1port Multimode VDSL2
and ADSL2/2+,
annex M
886VA: 1-port
Multi-mode
VDSL2 and
ADSL2/2+,
annex B
888: 1-port
1-port 10/100
G.SHDSL (ATM Ethernet, 1-port
mode)
GE
888E: 1-port
G.SHDSL (EFM
mode)
1-port 10/100
Ethernet,
1-port GE;
Ethernet,
1-port GE or
SFP (892F
model only)
Wireless LAN
IEEE 802.11
b/g/n
(“W” model)
IEEE 802.11
b/g/n
(“W” model)
IEEE 802.11
b/g/n
(“W” model)
IEEE 802.11
b/g/n
(“W” model)
IEEE 802.11
a/b/g/n
(“W” model)
3G
No
Yes (“G” model) Yes (“G” model) Yes (“G” model) No
No
ISDN BRI
No
No
886VA model
only)
Yes
No
Yes
V.92 modem
No
No
No
No
Yes
4-port FXS
No
Yes
No
(“SRST” model)
Yes
No
(“SRST” model)
No
FXO
No
Yes
No
(“SRST” model)
No
No
No
Voice BRI
No
No
Yes
No
(“SRST” model)
No
SIP IP-to-IP Trunking
No
Yes
Yes
Yes
No
(“CUBE” model) (“CUBE” model) (“CUBE” model)
Yes
(“CUBE”
model)
Maximum VPN Tunnels 5
20
20
20
50
50
Content Filtering
No
Yes
Yes
Yes
Yes
Yes
Stateful Firewall
Yes
Yes
Yes
Yes
Yes
Yes
Inline IPS
No
Yes
Yes
Yes
Yes
Yes
ScanSafe Connector
No
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
75
75
Optimized TCP
Connections with
WAAS Express
No
Cisco 891
Cisco 892/
892F
Cisco 861
WAN Optimization with No
WAAS Express
Cisco 881
Cisco 886A/
887VA
Feature
IEEE 802.11
a/b/g/n
(“W” model)
No
Chapter 1: Routing
1-21
Rout i ng
- One 1000 BASE-T Gigabit Ethernet WAN port
- One 10/100 BASE-T Fast Ethernet WAN port
- Optional SFP port on 892F platform
- Intelligent hierarchical quality of service (HQoS): Supports hierarchical queuing and shaping
- Connectivity Fault Management (CFM), based on 802.1ag
- 802.3ah standard based Link operational administration and maintenance (OAM)
- Ethernet Local Management Interface (E-LMI) for the Customer Edge
- CFM Interworking and backwards compatibility
- Performance Management based on IP service-level agreement (SLA) for Ethernet
• Dedicated console and auxiliary ports for configuration and management
• Two USB 2.0 ports for security eToken credentials, booting, and loading configuration from USB
• Easy setup, deployment, and centralized and remote-management capabilities through web-based tools
and Cisco IOS Software
WAN Capacity with
WAAS Express
1.5 Mbps
2 Mbps
DRAM Required for
WAAS Express
768 MB
768 MB
Online model comparison chart: http://www.cisco.com/en/US/products/hw/routers/ps380/prod_models_comparison.html
Selected Part Numbers and Ordering Information
CISCO861W-GN-A-K9, E-K9,
P-K9
Cisco 861 Ethernet Security Router 802.11n (Americas-A, Europe-E. Japan-P)
CISCO881-SEC-K9
Cisco 881 Ethernet Sec Router w/ Adv IP Services
CISCO881W-GN-A-K9, E-K9,
P-K9
Cisco 881 Ethernet Security Router 802.11n (Americas-A, Europe-E. Japan-P)
CISCO881GW-GN-A-K9, E-K9
Cisco 881 Ethernet Security Router with 3G, 802.11n (Americas-A, Europe-E)
CISCO881G-A-K9
Cisco 881G FE Sec Router with Adv IP Serv, 3G N. America GSM/HSPA
CISCO881G-G-K9
Cisco 881G FE Sec Router with Adv IP Serv, 3G N. Global GSM/HSPA
CISCO881G-S-K9
Cisco 881G FE Sec Router bundle with Adv IP Serv, 3G Sprint
CISCO881G-V-K9
Cisco 881G FE Sec Router bundle with Adv IP Serv, 3G Verizon
C881G+7-K9
Secure Router with WAN FE and Embedded 3.7G HSPA+ Release 7 with SMS/GPS
C881G+7-A-K9
Secure Router with WAN FE and Embedded 3.7G HSPA+ Release 7 with SMS/GPS for AT&T
networks
C881G-U-K9
Cisco 881G FE Sec Router with Adv IP Serv, 3.5G Global (non-US) GSM/HSPA
C881G-V-K9
Cisco 881G FE Sec Router with Adv IP Serv, 3G Verizon CDMA EV-DO Rev A
C881G-S-K9
Cisco 881G FE Sec Router bundle with Adv IP Serv, 3G Sprint CDMA EV-DO Rev A
C881G-V-K9
Cisco 881G FE Sec Router bundle with Adv IP Serv, 3G BSNL CDMA EV-DO Rev A
CISCO887V-SEC-K9
Cisco 887 VDSL2 over POTS Sec Router w/ ISDN B/U, Adv IP Services
CISCO886VA-K9
Cisco 886VA router with VDSL2/ADSL2+ over ISDN
C886VAG+7-K9
Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G HSPA+ Release 7 with
SMS/GPS
CISCO886VA-SEC-K9
Cisco 886VA Secure router with VDSL2/ADSL2+ over ISDN
CISCO887VA-K9
Cisco 887VA router with VDSL2/ADSL2+ over POTS
C887VAG+7-K9
Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G HSPA+ Release 7 with
SMS/GPS
C887VAG-S-K9
Secure Router with Raiders VDSL2/ADSL2+ over POTS (Annex M) and Embedded 3.7G HSPA+
Release 7 with GPS
CISCO887VA-SEC-K9
Cisco 887VA Secure router with VDSL2/ADSL2+ over POTS
CISCO887VA-M-K9
Cisco 887VA Annex M router
C887VAMG+7-K9
Secure Router with Raiders VDSL2/ADSL2+ over POTS (Annex M) and Embedded 3.7G HSPA+
Release 7 with GPS
CISCO888GW-G-AN-K9, ENK9
Cisco 888 G.SHDSL Wireless Router with 3G; 802.11n (Americas-A, Europe-E)
CISCO888EW-GN-E-K9
Cisco 888E G.SHDSL Router with 802.11n ETSI Compliant and 802.3ah EFM Support
C888EG+7-K9
Secure Router with Ethernet over G.SHDSL (EFM) and Embedded 3.7G HSPA+ Release 7 with
SMS/GPS
C881-CUBE-K9
Cisco 881 Ethernet Security Router with integrated CUBE Licenses
C886VA-CUBE-K9
Cisco 886VA Secure router with VDSL2/ADSL2+ over ISDN and integrated CUBE licenses
C887VA-CUBE-K9
Cisco 887VA router with VDSL2/ADSL2+ over ISDN and integrated CUBE licenses
C888-CUBE-K9
Cisco 888 G.SHDSL Router with integrated CUBE licenses
C888E-CUBE-K9
Cisco 888E G.SHDSL Router with 802.3ah EFM Support and integrated CUBE licenses
C892F-CUBE-K9
Cisco 892F SFP Gigabit Ethernet Security Router and integrated CUBE licenses
C881SRSTW-GN-A-K9, E-K9
Cisco 881 SRST Ethernet Security Router with FXS, FXO; 802.11n (Americas-A, Europe-E)
1-22
Chapter 1: Routing
Cisco 881 SRST Ethernet Security Router with FXS, BRI; 802.11n (Americas-A, Europe-E)
CISCO891W-AGN-A-K9, N-K9
Cisco 891W Gigabit Ethernet Security Router w/ 802.11n (Americas-A, Australia-N)
CISCO892W-AGN-E-K9
Cisco 892W Gigabit Ethernet Security Router w/ 802.11n ETSI Comp
For More Information
http://www.cisco.com/go/800
WAN Routers
Cisco 7600 Series Routers
The Cisco 7600 Series Routers combine optical WAN and metropolitan-area
network (MAN) networking and high-volume Ethernet aggregation with a focus
on the delivery of high-touch services for the IP and Multiprotocol Label
Switching (MPLS) edge. These routers combine Layer 2 and Layer 3 networking
capabilities with a high-bandwidth, high-performance architecture, including
hardware-based forwarding of Multiprotocol Label Switching (MPLS), IPv4, and
IPv6. Cisco 7600 Series form factors include the Cisco 7603-S, 7604, 7606-S,
7609-S, and 7613 models. Each router can deliver DS-0 to OC-192 WAN and n x
10-Mbps Ethernet to n x 10-Gigabit Ethernet connectivity into service provider
edge, MAN, and enterprise networks for a variety of quad-play (data, voice, video, and mobile) and aggregation
solutions. All Cisco 7600 Series Routers comply with Network Equipment Building Standards (NEBS) and have a
30-Mpps forwarding rate.
Ideal for Companies That Need These Features
Cisco 7603
• Three-slot (horizontal) chassis; 320-Gbps backplane bandwidth
Cisco 7604
• Four-slot (horizontal) chassis; 320-Gbps backplane bandwidth
Cisco 7606
• Six-slot (horizontal) chassis; 480-Gbps backplane bandwidth
Cisco 7609
• Nine-slot (vertical) chassis; 720-Gbps backplane bandwidth
Cisco 7613
• Thirteen-slot (horizontal) chassis; 720-Gbps backplane bandwidth
Key Features and Benefits
• Cisco 7600 Series Routers provide up to 30-Mpps central or up to 400-Mpps distributed forwarding with
hardware-accelerated IPv4, IPv6, and Multiprotocol Label Switching (MPLS).
• The modular routers are scalable from 32- to 720-Gbps switch fabric.
• These routers represent one of the widest, most complete ranges of WAN interfaces in the industry, with DS0 to OC-192 connectivity.
• Using the Cisco 7600 Series/Catalyst 6500 Series Enhanced FlexWAN Module, Cisco 7000 Series port
adapters are shared with the Cisco 7200, 7300, 7400, and 7500 models, simplifying sparing and protecting
customer investment in interfaces.
• Cisco 7600 Series Routers support many Cisco Catalyst 6500 LAN interfaces, offering n x 10-Mbps Ethernet
to 10 Gbps.
Specifications
Feature
Cisco 7603
Cisco 7604
Fixed Ports
SFP & 10/100/1000
(Sup720)
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Cisco 7606
Expansion
Slots
3 (horizontal)
4 (horizontal)
6 (horizontal)
Cisco 7609
9 (vertical)
Cisco 7613
13 (horizontal)
WAN Interface DS0 to OC-192
Range
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Processor
Supervisor720-3B
Supervisor7203BXL
Supervisor 32
RSP720-3C
RSP720-3CXL
RSP720-10G-3C
RSP720-10G-3CXL
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Forwarding
Rate
Up to 30 Mpps
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Backplane
Capacity
240 Gbps
320 Gbps
480 Gbps
720 Gbps
720 Gbps
Chapter 1: Routing
1-23
Rout i ng
C888SRSTW-GN-A-K9, E-K9
Flash PCMCIA up to 512MB on
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Memory
Sup720
up to 1 G on RPS720
System DRAM 512 MB on Sup720- Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Memory
3B
1G on Sup720-3BXL
1G on RSP720-3C
2G on RSP7203CXL
Internal Power AC or DC
Supply
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
RPS Support
Yes
Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603 Same as Cisco 7603
Chassis
Height
4 RU
5 RU
7 RU
Rack
Mountable
Yes, up to 11 per
rack
Yes, up to 10 per
rack
Yes, up to 6 per rack Yes, up to 2 per rack Yes, up to 2 per rack
Dimensions
(H x W x D)
7 x 17.37 x 20.3 in.
7 x 17.37 x 21.75 in.
12.25 x 17.37 x 21.75 36.75 x 17.2 x 20.7 in. 33.3 x 17.2 x 18.1 in.
in.
20 RU
18 RU
Online model comparison chart: http://www.cisco.com/en/US/products/hw/routers/ps368/prod_models_comparison.html
Selected Part Numbers and Ordering Information
Cisco 7613 Systems
7613-RSP720C-P
Cisco 7613 Chassis,13-slot, RSP720-3C, PS
7613-RSP720CXL-P
Cisco 7613 Chassis,13-slot, RSP720-3CXL, PS
7613-RSP720CXL-R
Cisco 7613 Chassis,13-slot, Redundant System, 2RSP720-3CXL, 2PS
7613-RSP720C-R
Cisco 7613 Chassis,13-slot, Redundant System, 2RSP720-3C, 2PS
7613-RSP7C-10G-P
Cisco 7613 Chassis,13-slot, RSP720-3C-10GE, PS
7613-RSP7XL-10G-P
Cisco 7613 Chassis,13-slot, RSP720-3CXL-10GE, PS
7613-RSP7XL-10G-R
Cisco 7613 Chassis,13-slot, Red System, 2RSP720-3CXL-10GE, 2PS
7613-RSP7C-10G-R
Cisco 7613 Chassis,13-slot, Red System, 2RSP720-3C-10GE, 2PS
CISCO7613
Cisco 7613 Chassis
7613-2SUP720XL-2PS
Cisco 7613 13-slot, Redundant System, 2 SUP720-3BXL and 2 PS
7613-SUP7203B-PS
Cisco 7613 Chassis, 13-slot, SUP7203B, Power Supply
7613-SUP720XL-PS
Cisco 7613 13-slot, SUP720-3BXL and PS
7613-S323B-10G-P
Cisco 7613 Chassis, 13-slot, SUP32-2X10GE-3B, PS
7613-S323B-10G-R
Cisco7613 Chassis,13-slot, Redundant SUP32-2X10GE-3B and PS
7613-S323B-8G-P
Cisco 7613 Chassis, 13-slot, SUP32-8GE-3B, PS
7613-2SUP7203B-2PS
Cisco 7613 Chassis, 13-slot, 2 SUP7203B, 2 Power Supply
Cisco 7609 Systems
CISCO7609-S
Cisco 7609-S Chassis including fans
7609S-RSP720C-P
Cisco 7609S Chassis, 9-slot, RSP720-3C, PS
7609S-RSP720CXL-P
Cisco 7609S Chassis, 9-slot, RSP720-3CXL, PS
7609S-RSP720CXL-R
Cisco 7609S Chassis, 9-slot, Redundant System, 2RSP720-3CXL, 2PS
7609S-RSP720C-R
Cisco 7609S Chassis, 9-slot, Redundant System, 2RSP720-3C, 2PS
7609S-S32-8G-B-P
Cisco 7609S Chassis, 9-slot, SUP32-8GE-3B, PS
7609S-S32-10G-B-P
Cisco 7609S Chassis, 9-slot, SUP32-2X10GE-3B, PS
7609S-S32-8G-B-R
Cisco 7609S Chassis, 9-slot, Redundant SUP32-8GE-3B, PS
7609S-S32-10G-B-R
Cisco 7609S Chassis, 9-slot, Redundant SUP32-2X10GE-3B, PS
7609S-SUP720B-P
Cisco 7609S Chassis, 9-slot, SUP720-3B, PS
7609S-SUP720BXL-P
Cisco 7609S Chassis, 9-slot, SUP720-3BXL, PS
1-24
Chapter 1: Routing
Cisco 7609S Chassis, 9-slot, Redundant System, 2SUP720-3B, 2PS
7609S-SUP720BXL-R
Cisco 7609S Chassis, 9-slot, Redundant System, 2SUP720-3BXL, 2PS
7609S-RSP7XL-10G-R
Cisco 7609S Chassis, 9-slot, Red System, 2RSP720-3CXL-10GE, 2PS
7609S-RSP7C-10G-P
Cisco 7609S Chassis, 9-slot, RSP720-3C-10GE, PS
7609S-RSP7XL-10G-P
Cisco 7609S Chassis, 9-slot, RSP720-3CXL-10GE, PS
7609S-RSP7C-10G-R
Cisco 7609S Chassis, 9-slot, Red System, 2RSP720-3C-10GE, 2PS
Rout i ng
7609S-SUP720B-R
Cisco 7606 Systems
CISCO7606-S
Cisco 7606-S Chassis
7606S-RSP720C-R
Cisco 7606S Chassis,6-slot, Redundant System, 2RSP720-3C, 2PS
7606S-RSP720CXL-P
Cisco 7606S Chassis,6-slot, RSP720-3CXL, PS
7606S-RSP720CXL-R
Cisco 7606S Chassis,6-slot, Redundant System, 2RSP720-3CXL, 2PS
7606S-S32-10G-B-P
Cisco 7606S Chassis,6-slot, SUP32-2X10GE-3B, PS
7606S-S32-10G-B-R
Cisco 7606S Chassis,6-slot, Redundant SUP32-2X10GE-3B, PS
7606S-S32-8G-B-R
Cisco 7606S Chassis,6-slot, Redundant SUP32-8GE-3B, PS
7606S-SUP720B-P
Cisco 7606S Chassis,6-slot, SUP720-3B, PS
7606S-SUP720B-R
Cisco 7606S Chassis,6-slot, Redundant System, 2SUP720-3B, 2PS
7606S-SUP720BXL-P
Cisco 7606S Chassis,6-slot, SUP720-3BXL, PS
7606S-SUP720BXL-R
Cisco 7606S Chassis,6-slot, Redundant System, 2SUP720-3BXL, 2PS
7606S-RSP720C-P
Cisco 7606S Chassis,6-slot, RSP720-3C, PS
7606S-S32-8G-B-P
Cisco 7606S Chassis,6-slot, SUP32-8GE-3B, PS
7606S-RSP7C-10G-P
Cisco 7606S Chassis,6-slot, RSP720-3C-10GE, PS
7606S-RSP7XL-10G-P
Cisco 7606S Chassis,6-slot, RSP720-3CXL-10GE, PS
7606S-RSP7XL-10G-R
Cisco 7606S Chassis,6-slot, Red System, 2RSP720-3CXL-10GE, 2PS
7606S-RSP7C-10G-R
Cisco 7606S Chassis,6-slot, Red System, 2RSP720-3C-10GE, 2PS
Cisco 7604 Systems
7604-RSP720C-P
Cisco 7604 Chassis,4-slot, RSP720-3C, PS
7604-RSP720C-R
Cisco 7604 Chassis,4-slot, Redundant System, 2RSP720-3C, 2PS
7604-RSP720CXL-P
Cisco 7604 Chassis,4-slot, RSP720-3CXL, PS
7604-RSP720CXL-R
Cisco 7604 Chassis,4-slot, Redundant System, 2RSP720-3CXL, 2PS
7604-RSP7C-10G-P
Cisco 7604 Chassis,4-slot, RSP720-3C-10GE, PS
7604-RSP7C-10G-R
Cisco 7604 Chassis,4-slot, Red System, 2RSP720-3C-10GE, 2PS
7604-RSP7XL-10G-P
Cisco 7604 Chassis,4-slot, RSP720-3CXL-10GE, PS
7604-RSP7XL-10G-R
Cisco 7604 Chassis,4-slot, Red System, 2RSP720-3CXL-10GE, 2PS
7604-SUP720XL-PS
Cisco 7604 chassis, 4-slot, SUP720-3BXL, PS
7604-2SUP720XL-2PS
Cisco 7604 Chassis, 4-slot, 2SUP720-3BXL, 2 PS
CISCO7604
Cisco 7604 Chassis
7604-SUP7203B-PS
Cisco 7604 Chassis, 4-slot, SUP720-3B, PS
7604-2SUP7203B-2PS
Cisco 7604 Chassis, 4-slot, 2 SUP720-3B, 2 PS
7604-S323B-8G-P
Cisco 7604 Chassis, 4-slot, SUP32-8GE-3B, PS
7604-S323B-8G-R
Cisco 7604 Chassis, 4-slot, Redundant SUP32-8GE-3B and PS
7604-S323B-10G-R
Cisco 7604 Chassis, 4-slot, Redundant SUP32-2X10GE-3B and PS
7604-S323B-10G-P
Cisco 7604 Chassis, 4-slot, SUP32-2X10GE-3B, PS
7604-PS-CVR=
Cisco 7604 Power Supply Cover (Spare)
Cisco 7603 Systems
Chapter 1: Routing
1-25
7603S-S32-10G-B-P
Cisco 7603S Chassis, 3-slot, SUP32-2X10GE-3B, PS
7603S-S32-8G-B-P
Cisco 7603S Chassis, 3-slot, SUP32-8GE-3B, PS
CISCO7603-S
Cisco 7603-S Chassis
7603S-RSP720C-P
Cisco 7603S Chassis, 3-slot, RSP720-3C, PS
7603S-RSP720C-R
Cisco 7603S Chassis, 3-slot, Redundant System, 2RSP720-3C, 2PS
7603S-RSP720CXL-P
Cisco 7603S Chassis, 3-slot, RSP720-3CXL, PS
7603S-RSP720CXL-R
Cisco 7603S Chassis, 3-slot, Redundant System, 2RSP720-3CXL, 2PS
7603S-S32-10G-B-R
Cisco 7603S Chassis, 3-slot, Redundant SUP32-2X10GE-3B, PS
7603S-S32-8G-B-R
Cisco 7603S Chassis, 3-slot, Redundant SUP32-8GE-3B, PS
7603S-SUP720B-P
Cisco 7603S Chassis, 3-slot, SUP720-3B, PS
7603S-SUP720B-R
Cisco 7603S Chassis, 3-slot, Redundant System, 2SUP720-3B, 2PS
7603S-SUP720BXL-P
Cisco 7603S Chassis, 3-slot, SUP720-3BXL, PS
7603S-RSP7C-10G-P
Cisco 7603S Chassis, 3-slot, RSP720-3C-10GE, PS
7603S-RSP7C-10G-R
Cisco 7603S Chassis, 3-slot, Red System, 2RSP720-3C-10GE, 2PS
7603S-RSP7XL-10G-P
Cisco 7603S Chassis, 3-slot, RSP720-3CXL-10GE, PS
7603S-RSP7XL-10G-R
Cisco 7603S Chassis, 3-slot, Red System, 2RSP720-3CXL-10GE, 2PS
For More Information
http://www.cisco.com/go/7600
Cisco 7300 Series Routers
The Cisco 7301 is targeted at principal application areas within a
service provider network in a compact, single-rack form factor coupled
with a broad set of interfaces and Cisco IOS Software features. It packs
high performance of up to 1 Mpps in a space- and power-efficient form
factor that includes a single Cisco 7000 Series port adapter slot and 3
onboard Gigabit Ethernet (copper or optical) or Fast Ethernet ports.
Ideal for Companies That Need These Features
Cisco 7301
• Compact, power-efficient 1RU form factor
• Single Cisco 7000 Series port adapter slot
Key Features and Benefits
•
•
•
•
•
•
1 Mpps processing performance
Pluggable Gigabit Ethernet optics (Small Form-Factor Pluggables [SFPs])
Three fixed 10-/100-/1000-Mbps ports (RJ-45 or SFP optics) directly on the processor
Full Cisco IOS Software feature support
Up to 1 GB of available DRAM; up to 256 MB of removable Compact Flash memory
Front-to-back airflow and single-sided management
Specifications
Feature
Cisco 7301
Fixed Ports
Three Gigabit Ethernet ports
Expansion Slots
1
WAN Interface Range
DS-1 to OC-3
Forwarding Rate
Up to 1 Mpps
Backplane Capacity
1.2 Gbps
Flash PCMCIA Memory
64 MB (expandable to 256 MB)
System DRAM Memory
512 MB (expandable to 1 GB)
Min Cisco IOS Release
12.2(11)YZ
Internal Power Supply
AC or DC
RPS Support
Yes, for AC or DC
1-26
Chapter 1: Routing
1 RU
Rack Mountable
Yes, up to 40 per rack
Dimensions (H x W x D)
1.73 x 17.3 x 13.87 in. (4.39 x 43.94 x 35.23 cm.)
Rout i ng
Chassis Height
Selected Part Numbers and Ordering Information
Cisco 7301 System
CISCO7301=
Cisco 7301 chassis, 512 MB memory, A/C power,64MB Flash
CISCO7301-BB
Cisco7301,512MB Mem,16K license,64MB Flash, A/C power, IP/IOS
CISCO7301-BB-8K
Cisco 7301, 512M SDRAM, 8K Sub Broadband Feature License
CISCO7301BB-1G
Cisco 7301, 1 G Mem,64MB Fl, AC Pwr, IP IOS, up to 16k sub BBA lic
CISCO7301BB-8K-1G
Cisco 7301,1 G Mem, 64MB Fl, AC Pwr, IP IOS, up to 8k sub BBA lic
CISCO7301/ITP/BUN
Cisco ITP Signaling Gateway Bundle
CISCO7301/2+VPNK9
Cisco 7301, VAM2+, AC pwr, 512 sys mem, SDM
For More Information
http://www.cisco.com/go/7300
Cisco 7200 Series Routers
The Cisco 7200 Series Routers (Cisco 7201, Cisco 7204VXR, and Cisco
7206VXR) deliver an exceptional price-to-performance ratio, versatility,
and feature richness in a compact form factor. The Cisco 7200 is an
optimized integrated services aggregation OC-3/Gigabit Ethernet edge
router that is ideal as a WAN aggregator for the service provider (small
point of presence [POP]) or enterprise edge, as an enterprise WAN
gateway, as high-end managed customer premises equipment (CPE), for
IBM data center connectivity, or as a small core router. With the hardwaresupported IP Security (IPSec) encryption module as well as robust
firewall and Virtual Route Forwarding (VRF)-aware IPSec with Network Address Translation (NAT) support, the
Cisco 7200 Series is ideal for integrated security services. The Cisco 7200 also supports gatekeeper and IP-toIP gateway functions. Modularity combined with a low initial price point helps guarantee both investment
protection and maximum return on investment, allowing customers to upgrade or redeploy their Cisco 7200
Series Router as their network needs change.
Ideal for Companies That Need These Features
Cisco 7201
• 1-slot chassis
• Built-in NPE-G2 Network Processing Engine with up to 2 Mpps
• WAN services aggregation (for example, Multiprotocol Label Switching [MPLS] provider edge
traffic segmentation)
• Integrated edge services (for example, integrated security)
• Multiservice Interchange (MIX)-enabled bus for data, voice, and video applications
Cisco 7204VXR
• 4-slot chassis
• Modular processor, 1 Mpps, or 2 Mpps (Cisco NPE-G1, and Cisco NPE-G2 Network Processing
Engines)
• 1.8-Gbps backplane
• WAN services aggregation (for example, MPLS provider edge traffic segmentation)
• Integrated edge services (for example, integrated security)
• MIX-enabled bus for data, voice, and video applications
Cisco 7206VXR
• All the features of the Cisco 7204VXR Router in a 6-slot chassis
Key Features and Benefits
• Compact form factor—The router offers up to six port adapters in a fully modular 3RU form factor; seven port
adapters with a port adapter jacket card; choice of a 1-slot, and a 1RU chassis with built-in Cisco NPE-G2.
• Modularity—The router has choices of 1-, 4-, and 6-slot chassis, a selection of processors providing up to 2
Mpps, an extensive range of LAN and WAN interfaces with up to 48 ports per chassis, and single or dual
power supplies. Chassis are expandable to an additional slot by using an I/O slot as a port or service adapter
slot by using the port adapter jacket card.
• Exceptional value—The router offers superior price-to-performance ratio supporting high-speed media and
high-density configurations with up to 2 million packets per second processing at a competitive price point.
• Feature richness—The router supports Cisco IOS Software and enhancements for high-performance
network services. It offers industry-leading network services, including MPLS; route reflectors; broadband
aggregation; the Cisco IOS Intelligent Services Gateway; QoS; service management; IBM data center;
storage-area-network application; security; voice, video, and data support; and gatekeeper and IP-to-IP
gateway (session border controller) support.
Chapter 1: Routing
1-27
• Connectivity and flexibility—The router provides high port density and an extensive range of LAN and WAN
media.
• Common port adapters—Port adapters are shared with the Cisco 7300 and 7600 Series (with the Cisco
FlexWAN Module), simplifying sparing and protecting customer investment in interfaces.
• IP-to-IP gateway—Highest capacity of call support in Cisco router portfolio
Specifications
Feature
Cisco 7201
Cisco 7204VXR
Fixed Ports
4 GEs
0
Cisco 7206VXR
Expansion Slots
1
WAN Port Adapters
DS0 to OC-3
DS0 to OC-3
Same as 7204VXR
Forwarding Rate
Up to 2 Mpps
Up to 2 Mpps
Up to 2 Mpps
Backplane Capacity
N/A
1.8 Gbps (with NPE-G2)
Same as 7204VXR
Flash (Compact) Memory
256 MB (default and
max.)
For NPE-G2: 256 MB (default and max.)
For NPE-G1: 64 MB (expandable to 256
MB)
Same as 7204VXR
System DRAM Memory
1 GB (default); 2 GB
(max.)
NPE-G2: 1 GB (default); 2 GB (max.)
NPE-G1: 512 MB (default); 1 GB (max.)
Same as 7204VXR
0
1
4 (5 with port adapter jacket card
utilizing the I/O slot)
6 (7 with port adapter jacket
card utilizing the I/O slot)
Minimum Cisco IOS Release 12.4(4)XD7
12.2(31)SB4
12.4(15)T
NPE-G2: 12.4(4)XD; 12.4(15)T;
Same as 7204VXR
12.2(31)SB4 (and later)
NPE-G1: 12.2(4)BW, 12.2(15)B, 12.2(14)S,
12.2(14)SU, 12.2(15)T, 12.1(14)E, 12.3(1),
12.3(2)T, 12.0(28)S, 12.3(1a)B (and later);
Internal Power Supply
Dual AC or Dual DC –
By default
AC or DC, dual option
Same as 7204VXR
Redundant Power Supply
Yes, Dual AC or DC by
default
Yes, for AC or DC
Same as 7204VXR
Chassis Height
1 RU
4 RU
6 RU
Rack Mountable
Yes
Yes, up to 16 per rack
Same as 7204VXR
Dimensions
(H x W x D)
1.75 x 19 x 16.9 in.
5.25 x 16.8 x 17 in.
10.5 x 16.8 x 17 in.
Online model comparison chart: http://www.cisco.com/en/US/products/hw/routers/ps341/prod_models_comparison.html
1.
Jacket Card par t number: C7200-JC-PA
Selected Part Numbers and Ordering Information
Cisco 7200 Series Chassis
CISCO7201
Cisco 7201 router, with built-in dual power supplies, NPE-G2, and IP Software
Cisco 7200 NPE Bundles
7206VXR/NPE-G2
Cisco 7206VXR with NPE-G2 includes 3GigE/FE/E Ports and IP SW
7206VXR/NPE-G1
Cisco 7206VXR with NPE-G1 includes 3GigE/FE/E Ports and IP SW
Cisco 7200 MPLS/IPv6 Bundles
7206-IPV6/ADSVC/K9
Cisco 7206VXR IPv6/Adv. Ent. Services with NPE-G2
Cisco 7200 Security Bundles
7206VXRG2/VSAVPNK9
Cisco 7206VXR chassis, NPE-G2, C7200-VSA Security Module, 256 MB Flash, 1GB DRAM, IOS
ADVANCED SECURITY, SDM
7206VXRG2/2+VPNK9
Cisco 7206VXR NPE-G2 Bundle with Advanced Security IOS, 3 FE/GE, 64 MB Flash/1 GB
DRAM, VAM2+
7206VXRG1/2+VPNK9
Cisco 7206VXR, NPE-G1, SA-VAM2+, AC pwr, 512 sys mem, SDM
Cisco 7200 Broadband Bundles
CISCO7206-BB
Cisco 7206 Broadband Bundle NPE-G1 includes 3GigE/FE/E Ports
Cisco 7200 Channel Bundles
CISCO7204VXR-CH
Cisco 7204VXR, 4-slot chassis, 1 AC Supply w/ IP Software
CISCO7206VXR-CH
Cisco 7206VXR, 6-slot chassis, 1 AC Supply w/IP Software
1-28
Chapter 1: Routing
Rout i ng
Cisco 7200 MPLS/IPv6 Bundles
7206-IPV6/ADSVC/K9
Cisco 7206VXR IPv6/Adv. Ent. Services with NPE-G2
For More Information
http://www.cisco.com/go/7200
Service Provider Core/Edge Routers
Cisco Carrier Routing System (CRS)
The Cisco Carrier Routing System (CRS) provides industry-leading performance,
advanced services intelligence, environmentally aware design, and system
longevity. Each model uses Cisco IOS XR Software, a unique self-healing,
distributed operating system.
Models include:
• Cisco CRS-3, powered by Cisco QuantumFlow Array, a chipset architecture
engineered in multiple dimensions of scale, services, and savings
• Cisco CRS-1, built on the Cisco Silicon Packet Processor (SPP)
Packet-based data communications are being replaced by video and rich media
crossing the IP Next-Generation Network (NGN) in multiple directions. As part of a
medianet, a media-aware Cisco IP NGN, Cisco CRS eases this strain on networks. It efficiently handles the
multidirectional traffic of network and data center cloud interactions.
The Cisco CRS:
• Delivers continuous operations, with high performance single-flow line-rate forwarding
• Scales easily from numerous single-chassis form factors to a massive multichassis system, up to 322 Tbps
• Provides industry-leading efficiency, requiring low power, cooling, and rack-space use for intelligent,
service-rich bandwidth capacity
Cisco CRS-3 models build on the CRS-1 models' backward and forward compatibility, protecting your existing
and future investments for decades to come.
The Cisco CRS includes two major elements, line card shelves and fabric shelves, combinations of which allow
the system to scale from four 40-Gbps or 140-Gbps slots to as many as 1152 40-Gbps or 140-Gbps slots in 72
line card shelves interconnected using eight fabric shelves, all operating as a single system.
• Cisco CRS 16-Slot Single-Shelf System—A single, 16-slot line card shelf with total switching capacity of
1.2 Tbps (40-Gbps/slot) or 4.48 Tbps (140-Gbps/slot); built from a 16-slot line card chassis featuring a
midplane design
• Cisco CRS 8-Slot Single-Shelf System—A single, 8-slot line card shelf with total switching capacity of
640 Gbps (40-Gbps/slot) or 2.24 Tbps (140-Gbps/slot); built from an 8-slot line card chassis featuring a
midplane design
• Cisco CRS 4-Slot Single-Shelf System—A single, 4-slot line-card shelf with total switching capacity of
320 Gbps (40-Gbps/slot) or 1.12 Tbps (140-Gbps/slot); built from a 4-slot line card chassis featuring a
midplane design
• Cisco CRS-1 Multishelf System—Two to 72 line card shelves and 1 to 8 fabric shelves with a total switching
capacity of up to 92 Tbps (40-Gbps/slot) or 322 Tbps (140-Gbps/slot); shelves are connected only to the
fabric-card shelves where stage 2 of the three-stage switching is performed
Key Features and Benefits
• Delivery of differentiated voice, video, and data with mobility and business services with better quality of
service (QoS) and performance
• Flexible functionality integrated in a single platform: rich services’ processing, high performance packet
routing, efficient label switching, optimized optical transport
• Multicast traffic replicated in the fabric for efficient broadcast video applications
• Optical Transport (ITU G.709) integration with IP-over-DWDM (IPoDWDM) technology
• Intelligence for Data-Center Cloud interaction with Network Positioning System (NPS) technology
• Rich IPv6 support including dual-stack, translation/tunneling techniques with Carrier-Grade IPv6 (CGv6)
• Wire-rate line card integrated application performance monitoring, including for video
• Hardware-accelerated Operations, Administration and Performance (OAM)
• Consolidation of multiple networks into a single platform using secure domain routers (SDRs) while
maintaining hardware and software isolation
• Dedicated 8-KB ingress and egress queues on the line cards for superior performance
• Isolation of different classes of services to deliver high-quality voice, video, and premium traffic
• Granular process-level In Service Software Upgrades (ISSUs)
• Non-service affecting online insertion and removal (OIR) of all components to reduce downtime
• Cisco Nonstop Forwarding (NSF) and Stateful Switchover (SSO) to eliminate single points of failure without
service interruption, forwarding continues before, during, and after a route-processor switchover
• In-service, non-disruptive scaling from a single chassis to multiple chassis
• Shared port adapters (SPAs) and SPA interface processors (SIPs) to preserve hardware investment across
Cisco platforms, including the Cisco 12000, 7600, and 7300 Series Routers
Chapter 1: Routing
1-29
• Interchangeable interfaces between Cisco CRS and a range of other Cisco platforms
Specifications
Feature
16 slot Single-Shelf 8 slot Single-Shelf
System
System
4 slot Single-Shelf
System
Fabric Card Chassis
Design
Slots
Midplane design
Midplane design
Midplane design
Midplane design
Line card: 16 x 40Gbps/140-Gbps slots
Switch Fabric Card: 8
dedicated slots
Route Processor: 2
dedicated slots
Fan Controller: 2
dedicated slots
Line card: Eight 40Gbps/ 140-Gbps
slots
Switch-fabric card: 4
dedicated slots
Route processor: 2
dedicated slots
Fan tray: 2 fan trays
Line card: 40-Gbps/
140-Gbps slots
Switch fabric card: 4
dedicated slots
Route processor: 2
dedicated slots
Fans: 4 fans, 1 fan tray
Switch Fabric Card:
24 slots
Shelf Controller: 2
dedicated slots
Full-Duplex Throughput
1280 Gbps (40-Gbps/
slot)
4480 Gbps (140Gbps/slot)
640 Gbps(40-Gbps/
slot)
2240 Gbps (140Gbps/slot)
320 Gbps (40-Gbps/
slot)
1120 Gbps (140Gbps/slot)
Power
Maximum DC power
needed when chassis
is fully configured with
line cards with traffic
running: 10.92kW
Chassis power supply
maximum DC output:
13.2kW
Maximum DC power
needed when chassis
is fully configured with
line cards with traffic
running: 5992W
Chassis power supply
maximum DC output:
7.7kW
AC input = 4270VA @
16000 BTU/HR
DC input = 4326W
@16200 BTU/HR
Maximum DC = 9.1kW
@ 31,050 BTU/hr
Maximum AC =
10.4kW @ 32,668
BTU/hr
Dimensions
(H x W x D)
84 x 23.6 x 36 in
(213.36 x 59.94 x 91.44
cm);
With cable
management and
front cover—84 x 23.6
x 39.71 in (213.36 x
59.94 x 100.84 cm)
38.5 x 17.5 x 36.6 in
(97.79 x 44.45 x 92.964
cm) with base
cosmetics; With cable
management and
front cover—38.5 x
17.5 x 40.5 in (97.79 x
44.45 x 102.87 cm)
30 x 17.643 x 30.28 in
(76.2 x 44.813 x 76.91
cm) without doors and
cosmetics
Without cable
management and
front cover—84 x
23.6 x 35 in (213.36 x
59.94 x 88.9 cm); With
cable management
and front cover—84 x
23.6 x 41 in (213.36 x
59.94 x 104.2 cm)
Weight
939 lbs (425 kg) as
shipped, chassis only
with build in rack and
fan
trays installed
1008 lbs (457 kg)
chassis only as
shipped, including
power shelves,
without power
modules, and with
build in rack
1595 lbs (723 kg)
chassis fully
configured, using all
card slots, power
shelves, cosmetics,
and with build in rack
330.8 lb (148.86 kg)
chassis with fan, PDU
and blanks (as
shipped)
650lb (292.5 kg)
chassis as shipped,
including power
shelves, and all
line cards and route
processors
260 lb (117.93 kg)
chassis with fan,
power modules and
blanks (as shipped)
380 lb (172.37 kg)
chassis as shipped,
including power shelf,
fabric
cards, and all line
cards and route
processors
644 lbs (292 kg) as
shipped, chassis only
with fan trays installed
712.8 lbs (323 kg)
chassis only as
shipped, including
power shelves,
without power
modules
1559 lbs (707 kg)
chassis fully
configured
IP Features
Control-plane packet handling, IPv4, IPv6, (X)ACLs, QoS/class of service (CoS) using Modular
QoS CLI (MQC), IP packet classification and marking, Queuing (both ingress and egress),
Policing (both ingress and egress), Diagnostic and network management support
Software Components
Cisco IOS XR
IP over DWDM (IPoDWDM)
Features
•
•
•
•
Routing Features
Multiprotocol BGP Version 4 (MP-BGPv4), Open Shortest Path First Version 2 (OSPFv2),
OSPFv3, IS-IS, Static routes, RPL, Multicast, MPLS, High availability, Security, Manageability
GFEC: standard G.975 Reed-Salomon algorithm
EFEC: standard G.975.1 two orthogonally concatenated BCH super FEC code
Full C-band tunable laser with 50-GHz spacing
Router-to-router SONET/SDH-like operations, administration, maintenance, and provisioning
(OAM&P)
Online model comparison chart: http://www.cisco.com/en/US/products/ps5763/prod_models_comparison.html
Selected Part Numbers and Ordering Information
CRS-16/S
Cisco CRS-1 Series 16 Slots Carrier Routing System/Single
CRS-8/S
Cisco CRS-1 Series 8 Slots Carrier Routing System/Single
CRS-4/S
Cisco CRS-1 Series 4 Slots Carrier Routing System
1-30
Chapter 1: Routing
Cisco CRS-1 Multichassis System with 24-Slot Fabric Chassis
CRS-FC24=
Cisco CRS-1 Fabric Chassis 24-Slot System (complete FCC)
CRS-FCC=
Cisco CRS-1 FCC, spare (Chassis Only)
CRS3-16/S
Cisco CRS-3 16-Slot Carrier Routing System/Single
CRS3-8/S
Cisco CRS-3 8-Slot Single-Shelf System
CRS3-4/S
Cisco CRS-3 4-Slot Single-Shelf System
CRS3-MC-FC24
Cisco CRS-3 Multichassis System with 24-Slot Fabric Chassis
CRS3-FC24=
Cisco CRS-3 Fabric Chassis 24-Slot System (complete FCC)
CRS3-FCC=
Cisco CRS-3 FCC, spare (chassis only)
Rout i ng
CRS-MC-FC2
For More Information
http://www.cisco.com/go/crs
Cisco XR 12000 and 12000 Series Routers
The Cisco XR 12000 and 12000 Series Routers compose a portfolio of
intelligent routing solutions that scale from 2.5 to n x 10Gpbs capacity per
slot, facilitating carrier-class IP/Multiprotocol Label Switching (MPLS)
networks and accelerating the evolution to IP next-generation networks.
Key Features and Benefits
• The Cisco XR 12000 and 12000 Series Routers deliver up to 1.28Tbps switching capacity with wire-speed feature performance,
scalability, and graceful hardware and software upgrade paths.
• These routers offer full forward compatibility for all line cards and the
portfolio of shared port adapters (SPAs) and SPA interface processors
(SIPs).
• The routers scale to the edge, supporting backbone- or edge-optimized line cards in the same chassis.
• The routers maximize the value of line-rate edge applications with 10-G uplinks.
• IP quality of service (QoS) and congestion-control implementation facilitates real-time services such as
voice over IP (VoIP) and video. The distributed architecture and class-of-service features of the routers, such
as priority-based congestion control (Weighted Random Early Detection [WRED]) and dedicated Low
Latency Queuing (Modified Deficit Round Robin [MDRR]), along with virtual output queuing (Virtual Output
Queuing [VOQ]), eliminate head-of-line blocking (HOL) and maintain packet sequence integrity under all
conditions.
• Non-service-affecting online insertion and removal (OIR) of components (including switch fabric cards) and
front accessibility reduce downtime and simplify maintenance.
• Cisco Nonstop Forwarding (NSF) and Cisco Stateful Switchover (SSO) eliminate single points of failure, help
maintain system performance, and prevent service interruption; packet forwarding remains uninterrupted
before, during, and after a route-processor switchover.
• Performance Route Processor-3 (PRP-3)—PRP-3 is the premium route processor for the Cisco XR 12000
Series Router. This latest generation of Performance Route Processors (PRPs) vastly expands the
processing power for control plane and management plane applications, providing up to 300% improvement
over PRP-2 performance for such applications. The premium PRP-3 route processor greatly extends the
lifetime of the Cisco XR 12000 Series platform.
• Service Module Daughter Card (SMDC)—The new services card can be plugged on to the PRP-3 route
processor to support a comprehensive suite of CGv6 features, as well as a number of service applications
that help bridge the IPv6 divide and build a bridge to the future of the Internet.
Specifications
Feature
Cisco XR 12000/
12000 16-slot
Chassis
Cisco XR 12000/
12000 Series 10Slot Chassis
Cisco XR 12000/
Cisco XR 12000/
12000 Series 6-Slot 12000 Series 4-Slot
Chassis
Chassis
Slot Capacity
16 slots
10 slots
6 slots
4 slots
Aggregate Switching
Capacity
12016: 80 Gbps;
12416: 320 Gbps;
12816: 1280 Gbps
12010: 50 Gbps;
12410: 200 Gbps;
12810: 800 Gbps
12006: 30 Gbps;
12406: 120 Gbps
12404: 80 Gbps
Full-Duplex Throughput Per
12016: 2.5 Gbps/slot
12416: 10 Gbps/slot
12816: 40 Gbps/slot
12010: 2.5 Gbps/slot
12410: 10 Gbps/slot
12810: 40 Gbps/slot
12006: 2.5 Gbps/slot
12406: 10 Gbps/slot
12404: 10 Gbps/slot
Chapter 1: Routing
1-31
Dimensions
(H x W x D)
71.5 x 17.25 x 22.0 in
(181.6 x 184.21 x 55.9
cm); 72.5 x 18.75 x 24.0
in. 2; (43.8 x 47.6 x 61.0
cm)3
37.5 x 19 x 22.0 in.
(95.25 x 48.26 x 55.9
cm);
24.0 in. (61.0 cm)
18.5 in. (47.0 cm)
chassis width; 17.3 in.
(43.9 cm); 18.9 in. (48.0
cm); chassis depth
28.0 in. (71.1 cm)
8.75 in. (22.23 cm)
chassis width
17.38 in. (44.15 cm)
18.9 in. (48.01 cm)
chassis depth
27.5 in. (69.85 cm)
Weight
140 lb. (64 kg)4;
390 lb. (177 kg)5
125 lb. (57 kg)4;
275 lb. (125 kg)5
18.5 in. (47.0 cm);
chassis width: 17.3 in
(43.9 cm)
18.9 in. (48.0 cm)
chassis depth: 28.0 in.
(71.1 cm)
8.75 in. (22.23 cm);
chassis width: 17.38 in
(44.15 cm)
18.9 in. (48.01 cm)
chassis depth: 27.5 in.
(69.85 cm)
Chassis Per Rack
One
Two
Four
Eight
Software Components (Per
Base System)
Cisco IOS XR or Cisco IOS Software Operating System; Cisco Express Forwarding for
distributed packet forwarding
Compatibility
12800—Line cards that support 2.5-, 5-, 10-, or 20-Gbps capability; 12400—Line cards that
support 2.5-, 5- or 10-Gbps capability;
12000—Line cards that support 2.5-Gbps capability
Protocols
IPv4/v6, MPLS, BGPv4/v6, IS-IS, OSPFv2.0, RIPv2, IGMP, DVMRP, and PIM DX/SX
Connectivity
Packet over SONET/SDH (POS), Ethernet, ATM, copper (DS-3/E3), Channelized (CT1, CT3,
ChOC-3/CHSTM1, ChOC-12/CHSTM4, ChOC-48/CHSTM16); see Cisco IOS XR Software
release notes for specific connectivity support on the Cisco XR 12000 Series
1.
2.
3.
4.
5.
With AC input power shelf or DC input power shelf, front covers installed
Including chassis rack-mount flanges
Including cable-management system and front cover
Chassis only, including power shelf for 16-slot chassis
Chassis fully configured, using all card slots, AC or DC power shelf for 16-slot chassis, & AC or DC input power supplies
Selected Part Numbers and Ordering Information
Cisco XR 12000 16-Slot Systems
XR-12416/320-AC
Cisco XR 12000 16-slot chassis w/ 3 AC power supplies, 320-Gbps fabric (2 CSC & 3 SFC
cards)
XR-12416/320-AC4
Cisco XR 12000 16-slot chassis w/ 4 AC power supplies, 320-Gbps fabric (2 CSC & 3 SFC
cards)
XR-12416/320-DC
Cisco XR 12000 16-slot chassis w/ 4 DC power supplies, 320-Gbps fabric (2 CSC & 3 SFC
cards)
Cisco 12000 16-Slot Systems
GSR16/80-AC-8R
Cisco 12000 16-slot chassis w/ 3 AC power supplies, 80-Gbps fabric (2 CSC & 3 SFC cards), 2
blowers
12816E/1280
Cisco 12000 16-slot chassis w/ 4 AC power supplies, 1280-Gbps Enhanced fabric (2 CSC & 3
SFC cards), 2 blowers, 2 alarms, and 1 PRP-1
12816/1280-DC
Cisco 12000 16-slot chassis w/ 4 DC power supplies, 1280-Gbps fabric (2 CSC & 3 SFC cards),
2 blowers, 2 alarms, and 1 PRP-1
Cisco XR 12000 10-Slot Systems
XR-12410/200-AC
Cisco XR 12000 10-slot chassis w/ 2 AC power supplies, 200-Gbps fabric (2 CSC & 5 SFC
cards)
XR-12410/200-DC
Cisco XR 12000 10-slot chassis w/ 2 DC power supplies, 200-Gbps fabric (2 CSC & 5 SFC
cards)
Cisco 12000 10-Slot Systems
12010-AC
Cisco 12000 10-slot chassis w/ 2 AC power supplies, 50-Gbps fabric (2 CSC & 5 SFC cards), 1
blower
12010-DC
Cisco 12000 10-slot chassis w/ 2 DC power supplies, 50-Gbps fabric (2 CSC & 5 SFC cards), 1
blower
12810/800-AC
Cisco 12000 10-slot chassis w/ 2 AC power supplies, 800-Gbps fabric (2 CSC & 5 SFC cards), 1
blower
12810/800-DC
Cisco 12000 10-slot chassis w/ 2 DC power supplies, 800-Gbps fabric (2 CSC & 5 SFC cards),
1 blower
Cisco XR 12000 6-Slot Systems
XR-12406/120-AC
1-32
Chapter 1: Routing
Cisco XR 12000 6-slot chassis w/ 1 AC power supply, 120-Gbps fabric (1 CSC & 3 SFC cards), 1
blower
Cisco XR 12000 6-slot chassis w/ 1 DC power supply, 120-Gbps fabric (1 CSC & 3 SFC cards),
1 blower
Cisco 12000 6-Slot Systems
12006-AC
Cisco 12000 6-slot chassis w/ 2 AC power supplies, 30-Gbps fabric (2 CSC & 3 SFC cards), 1
blower
12006-DC
Cisco 12000 6-slot chassis w/ 2 DC power supplies, 30-Gbps fabric (2 CSC & 3 SFC cards), 1
blower
Cisco XR 12000 4-Slot Systems
XR-12404/80-AC
Cisco XR 12000 4-slot chassis w/ 2 AC power supply, 80-Gbps fabric (consolidated switch
fabric, clock scheduler, & alarm card), 1 blower, & 1 PRP-2
XR-12404/80-DC
Cisco XR 12000 4-slot chassis w/ 2 DC power supply, 80-Gbps fabric (consolidated switch
fabric, clock scheduler, & alarm card), 1 blower, & 1 PRP-2
For More Information
http://www.cisco.com/go/12000
Cisco ASR 9000 Series Aggregation Services Routers
The Cisco ASR 9000 Series represents an exciting new paradigm in the world of
Carrier Ethernet transport with exceptional scalability, carrier-class reliability,
environmentally conscious design, incredible flexibility, and an enticing new priceto-performance benchmark.
The Cisco ASR 9000 Series has four form factors: the Cisco ASR 9010 Router, the
Cisco ASR 9006 Router, the Cisco ASR 9922 Router, and the Cisco ASR 9000v
Router. Cisco ASR 9000 Series Routers are designed to provide true carrier-class
reliability using the Cisco IOS XR operating system, comprehensive system
redundancy, and a full complement of network resiliency schemes.
The Cisco ASR 9000 Series also offers service and application-level intelligence
focused on optimized video delivery and mobile aggregation. Finally, the Cisco
ASR 9000 Series is designed to simplify and enhance the operational and
deployment aspects of service-delivery networks.
Key Features and Benefits
• Cisco IOS XR modular operating system—The Cisco ASR 9000 Series leverages the Cisco IOS XR
operating system made famous by the highly successful Cisco CRS Carrier Routing System platform in core
deployments. The Cisco IOS XR operating system is purpose-built for distributed systems such as the
Cisco ASR 9000 Series, and uses a microkernel architecture to achieve true modularity. This modularity
provides the path to nonstop operations during software image upgrades or module changes, without
affecting normal platform operations.
• Fully distributed system—The Cisco ASR 9000 Series operates in a fully distributed fashion; that is, all
packet-forwarding decisions and actions take place on the individual line cards. These high-density Ethernet
line cards are equipped with a specialized network processor that provides a flexible programming
infrastructure with high-density hierarchical quality-of-service (H-QoS) services, security, and integrated
synchronous Ethernet. The distributed nature of the Cisco ASR 9000 Series improves resiliency by adding a
new dimension in scale for features such as bidirectional forwarding detection (BFD) and Ethernet
operations, administration, and maintenance (E-OAM).
• Operationally efficient and redundant hardware—The Cisco ASR 9000 Series provides an infrastructure
where all common components, route switch processors (RSPs), switching fabric, fans, and power supplies,
are completely redundant. In addition, the platform is designed such that power is used on an as-needed
basis depending on system requirements. Power has been modularized for a true pay-as-you-grow
approach, reducing capital expenditures (CapEx) and again providing an operationally efficient deployment.
The Cisco ASR 9000 also provides a space-optimized small-platform option that uses the Series' common
components and retains a central office deployment-ready capability using a patent-pending side-to-back
airflow design.
• Environmentally conscious design—In today's world of increasing awareness of the human impact on the
environment and the resultant fiscal implications, Cisco ASR 9000 Series Routers bring a fresh new
“conscious” approach to product development. From optimal thermal design to the architecture of the power
infrastructure, from the placement of line card components to the pitch of each slot, every design aspect had
one goal in mind: reduced environmental impact through lowered power consumption and decreased
cooling requirements. Even the product packaging process was evaluated to minimize the use of packaging
material and thereby reduce waste at customer locations. The Cisco ASR 9000 Series is an example of the
continued Cisco commitment to efficient and future-friendly product design.
• Network virtualization—Leveraging Cisco's “network virtualization” or nV technology, the Cisco ASR 9000
System offers exceptional pay as you grow scale, carrier-class reliability, and simplified service provisioning.
The ASR 9000v sets the industry benchmark as a virtualized compact carrier-class converged access and
aggregation platform.
• Integrated services capability—The Cisco ASR 9000 Series delivers flexible and highly scalable service
integration through the Integrated Service Module (ISM) allowing operational efficiency and faster time to
market. A Cisco ASR 9000 system populated with ISMs becomes a platform upon which new services and
applications can be layered over time and deployed much more quickly.
Chapter 1: Routing
1-33
Rout i ng
XR-12406/120-DC
Specifications
Model
Cisco ASR 9006
Cisco ASR 9010
Cisco ASR 9922
Dimensions
Height—17.5 in. (444.5 mm)
Width—17.5 in. (444.5 mm)
Depth:
• With doors—31.45 in. (798.8
mm)
• Without doors—28.65 in
(727.2 mm)
Weight:
• 110 lbs (50 kg) (Unloaded)
• 230 lbs (106.8 kg) (Fully
Loaded)
Height—36.75 in. (933.5 mm)
Width—17.5 in. (444.5 mm)
Depth:
• With doors—31.45 in. (798.8
mm)
• Without doors—28.65 in
(727.2 mm)
Weight:
• 191 lbs (86.8 kg) (Unloaded)
• 375 lb (170.5 kg) (maximum)
Height: 77 in. (44 RU chassis)
Width: 17.75 in.
Depth:
• With doors: 31.45 in. (798.8
mm)
• Without doors: 28.65 in. (727.2
mm)
Weight:
• 420 lbs (unloaded)
• 800 lbs (maximum)
Slot Orientation
Horizontal
Vertical
Vertical
Cisco ASR 9000 Series RSP Same as Cisco ASR 9010
Dual redundant RSPs in 2
slots
Dual redundant RPs in 2 slots
RSPs segregated into RP and
FC
Cisco ASR 9000 Series LCs Four line card slots
Eight line card slots
20 line card slots
“Commons” Components
Two RSPs
Two fan trays
One PEM (either DC or AC)
One fan filter
Two RSPs
Two fan trays
Two PEMs (either DC or AC)
One fan filter
2 RPs
7 FCs
4 fan trays
4 DC PEMs or 4 AC PEMs
1 fan filter
Reliability and Availability
Same as Cisco ASR 9010
Fabric redundancy
Fan redundancy
Feed redundancy
Power-supply redundancy
RSP redundancy
Software redundancy
Fabric redundancy
Fan redundancy
Feed redundancy
Power-supply redundancy
RSP redundancy
Software redundancy
Rack Mounting
Same as Cisco ASR 9010
Note: Minimum 17.75-in.
opening between posts is
needed for proper operation.
Yes
• 19-inch
• 21 and 23 inch adapters
available
Yes
• 19-inch
• 21 and 23 inch adapters
available
Airflow
Side-to-back
Front-to-back
Front-to-back
Chassis Switching
Up to 3.2 Tbps
Up to 6.4 Tbps
Up to 48Tbps
Fabric
Same as Cisco ASR 9010
One per RSP
• Active/Active non-blocking
operation mode in dual RSP
redundant configuration.
• Fully redundant in dual RSP
redundant configuration
• Built-in service-intelligence
and traffic-prioritization
capability
7 fabric cards
• Supports 6+1 redundancy
• Operate in Active/Active
nonblocking mode
• Built-in service-intelligence
and traffic-prioritization
capability
Thermal
Two fan trays
• Six high-efficiency fans per
tray
• Variable-speed fans for
optimal thermal
performance
• No single point of failure
Two fan trays
• Twelve high-efficiency fans
per tray
• Variable-speed fans for
optimal thermal
performance
• No single point of failure
4 fan trays
• 12 high-efficiency fans per
tray
• Variable-speed fans for
optimal thermal performance
• No single point of failure
Capacity
Power
• Up to 6 power modules (AC • Up to 16 power modules (AC
or DC) for future scalability
or DC) for future scalability
Multiple power module types Multiple power module types
• 3-kW AC power module
• 3-kW AC power module
• 2.1 and 1.5-kW DC power
• 2.1-kW DC power modules
modules
Note: Mixing of AC and DC
Note: Mixing of AC and DC
modules is not supported. DC
modules is not supported. DC modules can be mixed and
modules can be mixed and
matched.
matched.
• Module redundancy: 1:N-1:1 • Module redundancy: 1:N-1:1 • Module redundancy: 1:N-1:1
Redundancy
• Feed redundancy
• Feed redundancy
• Feed redundancy
• PEM redundancy
• PEM Redundancy
Online model comparison chart: http://www.cisco.com/en/US/products/ps9853/prod_models_comparison.html
Modularity
1-34
Chapter 1: Routing
• Up to 3 power modules (AC
or DC) for future scalability
Multiple power module types
• Same as Cisco ASR 9010
Note: Mixing of AC and DC
modules is not supported. DC
modules can be mixed and
matched.
Rout i ng
Selected Part Numbers and Ordering Information
Cisco ASR 9000 Series Chassis
ASR-9006-AC/ASR-9010-DC
Cisco ASR 9006 chassis
ASR-9010-AC/ASR-9010-DC
Cisco ASR 9010 chassis
ASR-9922-AC/ASR-9922-DC
Cisco ASR 9922 chassis
A9K-2X100GE-SE
Cisco ASR 9000 2-Port 100GE Service Edge Optimized Line Card
A9K-2X100GE-TR
Cisco ASR 9000 2-Port 100GE Transport Optimized Line Card
A9K-24X10GE-SE
Cisco ASR 9000 24-Port 10GE Service Edge Optimized Line Card
A9K-24X10GE-TR
Cisco ASR 9000 24-Port 10GE Transport Optimized Line Card
A9K-ISM-100
Cisco ASR 9000 Integrated Services Module
For More Information
http://www.cisco.com/go/asr9000
Cisco ASR 1000 Series Aggregation Services Routers
The Cisco ASR 1000 Series Aggregation Services Routers
include five versions: the Cisco ASR 1001 Router, the Cisco ASR
1002 Router, the Cisco ASR 1004 Router, the Cisco ASR 1006
Router, and the Cisco ASR1013 Router. All five models use the
new, innovative, and powerful Cisco QuantumFlow Processor and
are optimized for both service provider, managed services and
enterprise deployments.
For service provider deployments, the Cisco ASR 1000 Series is designed for broadband, SP edge, and route
reflector. For enterprise deployments, the Cisco ASR 1000 Series is applicable for WAN aggregation, Internet
edge, data center interconnect, and ultra-high-end branch.
The Cisco ASR 1000 Series delivers routing with multiple services embedded in the Cisco QuantumFlow
Processor at wire speeds of up to 40 Gbps. The supported services include security services (IPsec
encryption, firewall, and router security), Performance Routing, quality of service (QoS), multicast, Application
Visibility and Control (AVC), broadband aggregation, and Cisco Unified Border Element (also known as session
border controller), among others.
With the separation of the control and data planes in the Cisco ASR 1000 Series Router architecture, it enables
software redundancy (on the Cisco ASR 1001, 1002, and 1004 Routers), hardware redundancy (on the Cisco
ASR 1006 and ASR 1013 Routers), and distributed denial service of attack (DDoS) protection for all the models.
Additionally, the modular Cisco IOS XE Software that is introduced with the Cisco ASR 1000 Series facilitates In
Service Software Upgrade (ISSU) on the ASR 1006 and ASR 1013. I/O connectivity is provided through shared
port adapters (SPAs), which are housed in the SPA Interface Processor (SIP) card.
From a price-to-performance perspective, the Cisco ASR 1000 Series Router solution fits well between the
Cisco 7200 and Cisco 7301 Series and the Cisco 7600 and Cisco Catalyst 6500 Series Switches, thus
providing a comprehensive high-end and midrange routing portfolio.
All the following Cisco ASR 1000 Series Aggregation Services Routers offer L3VPN, route reflector, WAN
services aggregation, managed customer premises equipment (CPE), and Layer 2 Tunneling Protocol access
concentrator (LAC) or Layer 2 Tunneling Protocol network server (LNS).
Ideal for Companies That Need These Features
Cisco ASR 1001
•
•
•
•
•
One SPA slot
One integrated SIP
One integrated route processor
One integrated embedded services processor engine at 2.5 Gbps by default and 5 Gbps with
the Upgrade Feature License
Built-in four 1-Gigabit Ethernet ports
Support of Software Redundancy
One optional Integrated Daughter Card (IDC) with one of the following choices: two OC-3
ports, four T3 ports, four GE ports, 8 channelized T1/E1 ports, 160GB hard disk drive
Up to 10,000 Cisco Unified Border Element sessions
•
•
•
•
•
•
Three SPA slots
One integrated 10-Gigabit Ethernet SIP (ASR1000-SIP10)
One integrated route processor (Cisco ASR 1000 Series RP1)
One embedded services processor (Cisco ASR 1000-ESP5 or ASR1000-ESP10)
Built-in four 1-Gigabit Ethernet ports
Support of Software Redundancy
•
•
•
Cisco ASR 1002
Chapter 1: Routing
1-35
Cisco ASR 1004
•
•
•
•
•
•
Cisco ASR 1006
•
•
•
•
Cisco ASR 1013
•
•
•
•
•
Eight SPA slots
Two SIP cards (ASR1000-SIP10 and/or ASR1000-SIP40), each with 4 SPA slots
One route processor (ASR 1000-RP1 or ASR1000-RP2)
One embedded services processor (ASR 1000-ESP10, ASR1000-ESP20, or ASR1000-ESP40)
Support of Software Redundancy
Up to 16,000 Cisco Unified Border Element sessions
Twelve SPA slots
Three SIP cards (ASR1000-SIP10 and/or ASR1000-SIP40), each with 4 SPA slots
Up to two route processors (ASR 1000-RP1 or ASR1000-RP2)
Up to two embedded services processors (ASR1000-ESP10, ASR1000-ESP20 or ASR1000ESP40)
• In-box hardware redundancy (dual ESP and dual route processor) – optional
• Up to 16,000 Cisco Unified Border Element sessions
Twenty-four SPA slots
Six SIP cards (ASR1000-SIP10 and/or ASR1000-SIP40), each with 4 SPA slots
Up to two route processors (ASR1000-RP2)
Up to two embedded services processors (ASR1000-ES40)
In-box hardware redundancy (dual ESP and dual route processor) – optional
Key Features and Benefits
• Compact form factor—The Cisco ASR 1000 Series offers 2.5-Gigabit throughput in a compact 1-rack unit
chassis with fixed components, up to 10-Gigabit Ethernet throughput in compact modular 2-rack unit (2RU)
form factor, up to 40 Gigabit throughput in a modular 4-rack unit (4RU), modular 6-rack unit (6RU) and,
modular 13-rack unit (13 RU) form factors.
• Modularity—The Cisco ASR 1000 Series offers a choice of chassis that supports from 1 up to 24 SPAs. The
Cisco ASR 1004, ASR 1006, and 1013 provide full flexibility to select different types of Route Processors
(RPs) for control plane processing, Embedded Services Processors (ESPs) for data forwarding, SPA
Interface Processors (SIP), and SPAs based on deployment requirements. On the Cisco ASR 1002, the RP
and SIP are integrated in the chassis. On the Cisco ASR 1001, the RP, ESP, and RP are integrated in the
chassis, and it has various models that are pre-installed with a non-field-upgradeable Integrated Daughter
Card (IDC) to provide additional interfaces.
• Integrated services—Services can be enabled either at the time of ordering or after the router is already
deployed. Cisco IOS Software redundancy, encryption, firewall, Session Border Controller functionality
(also known as Cisco Unified Border Element [CUBE]), and Application Visibility and Control (AVC) can all be
enabled by purchasing feature licenses with no need for hardware upgrades.
• High availability—Cisco offers in-box engine redundancy on the Cisco ASR 1006 and Cisco ASR 1013 and
Cisco IOS Software redundancy on the Cisco ASR 1001, 1002 and 1004 models.
• Common SPAs—SPAs are shared with the Cisco Catalyst 6500 and Catalyst 7600 Series, simplifying
sparing and protecting customer investment in interfaces.
• WebEx Node SPA – double-height SPA supported on the ASR1002, ASR1004, ASR1006, and ASR1013
chassis maximizes bandwidth efficiency and user experience for WebEx users in the Enterprise.
• DSP SPA – single-height SPA supported on all ASR 1000 models to provide voice and video transcoding
and transrating, and DTMF interworking with CUBE(SP) and CUBE(ENT).
Specifications
Feature
ASR1001- Cisco ASR1001- Cisco ASR1001- Cisco ASR
Cisco ASR1001 Cisco
2XOC3POS
4XT3
HDD
1001-4X1GE
Built-in Gigabit Ethernet
Ports
4
4
4
4
4
Integrated Daughter Card
No
2 x OC-3 Ports
4 x T3 Ports
1 x 160GB Hard
Disk Drive
4 x GE Ports
Embedded Service
Processor Slots
Integrated
Integrated
Integrated
Integrated
Integrated
Route Processor Slots
Integrated
Integrated
Integrated
Integrated
Integrated
SIP Card Slots
Integrated
Integrated
Integrated
Integrated
Integrated
Shared Port Adapter Slots 1
1
1
1
1
Bandwidth
2.5 Gbps;
upgradable to 5
Gbps with
Performance
Upgrade License
2.5 Gbps;
upgradable to 5
Gbps with
Performance
Upgrade License
2.5 Gbps;
upgradable to 5
Gbps with
Performance
Upgrade License
2.5 Gbps;
upgradable to 5
Gbps with
Performance
Upgrade License
2.5 Gbps;
upgradable to 5
Gbps with
Performance
Upgrade License
Forwarding Rate
Up to 7.5 Mpps
Up to 7.5 Mpps
Up to 7.5 Mpps
Up to 7.5 Mpps
Up to 7.5 Mpps
Crypto Performance
Up to 1.8 Gbps
Up to 1.8 Gbps
Up to 1.8 Gbps
Up to 1.8 Gbps
Up to 1.8 Gbps
Route Processor Memory
4 GB (default);
upgradeable to
8GB or 16GB
4 GB (default);
upgradeable to
8GB or 16GB
4 GB (default);
upgradeable to
8GB or 16GB
4 GB (default);
upgradeable to
8GB or 16GB
4 GB (default);
upgradeable to
8GB or 16GB
1-36
Chapter 1: Routing
IOS XE 3.2.0S
IOS XE 3.2.0S
IOS XE 3.2.0S
IOS XE 3.3.0S
IOS XE 3.3.0S
Redundant Power Supply
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Chassis Height
1 RU
1 RU
1 RU
1 RU
1 RU
Rack Mountable
Yes
Yes
Yes
Yes
Yes
Dimensions (H x W x D)
1.71 x 17.3 x 18.5
in.
1.71 x 17.3 x 18.5
in.
1.71 x 17.3 x 18.5
in.
1.71 x 17.3 x 18.5
in.
1.71 x 17.3 x 18.5
in.
Airflow
Front-to-back
Front-to-back
Front-to-back
Front-to-back
Front-to-back
Feature
Cisco ASR1001- Cisco ASR1002 Cisco ASR1004 Cisco ASR1006 Cisco ASR 1013
8XCHT1E1
Built-in Gigabit Ethernet
Ports
4
4
0
0
0
Integrated Daughter Card
8 x Channelized
T1/E1 Ports
No
No
No
No
Embedded Service
Processor Slots
Integrated
1 – ESP5 or
ESP10
1 – ESP10,
ESP20, or ESP40
2 – ESP10,
ESP20, or ESP40
2 – ESP40
Route Processor Slots
Integrated
Integrated
1 – RP1 or RP2
2 – RP1 or RP2
2 – RP2
SIP Card Slots
Integrated
Integrated
2
3
6
Shared Port Adapter Slots 1
3
8
12
24
Up to 40 Gbps
with ESP-40
Up to 40 Gbps
with ESP-40
Up to 40 Gbps
with ESP-40
Up to 7.5 Mpps
Up to 8 Mpps with Up to 23 Mpps
ESP-10
with ESP-40
Up to 23 Mpps
with ESP-40
Up to 23 Mpps
with ESP-40
Crypto Performance
Up to 1.8 Gbps
Up to 4 Gbps with Up to 11 Gbps
ESP-10
with ESP-40
Up to 11 Gbps
with ESP-40
Up to 11 Gbps
with ESP-40
Route Processor Memory
4 GB (default);
upgradeable to
8GB or 16GB
4 GB (default); 4
GB (max.)
RP1: 2 GB
(default); 4 GB
(max.)
RP2: 8 GB
(default); 16 GB
(max.)
RP1: 2 GB
(default); 4 GB
(max.)
RP2: 8 GB
(default); 16 GB
(max.)
RP1: 2 GB
(default); 4 GB
(max.)
RP2: 8 GB
(default); 16 GB
(max.)
Minimum Cisco IOS
Release
IOS XE 3.3.0S
IOS XE 2.1.0
IOS XE 2.1.0
IOS XE 2.1.0
IOS XE 3.1.0S
Redundant Power Supply
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Yes, Dual AC or
DC by default
Chassis Height
1 RU
2 RU
4 RU
6 RU
13 RU
Rack Mountable
Yes
Yes
Yes
Yes
Yes
Dimensions (H x W x D)
1.71 x 17.3 x 18.5
in.
3.5 x 17.2 x 22 in.
7.0 x 17.2 x 22 in.
10.5 x 17.2 x 22 in. 22.8 x 17.2 x 22 in
Airflow
Front-to-back
Front-to-back
Front-to-back
Front-to-back
Bandwidth
2.5 Gbps;
Up to 10 Gbps
upgradable to 5
with ESP-10
Gbps with
Performance
Upgrade License
Forwarding Rate
Front-to-back
Online model comparison chart: http://www.cisco.com/en/US/products/ps9343/prod_models_comparison.html
Selected Part Numbers and Ordering Information
ASR1001
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, Dual P/S
ASR1001-2XOC3POS
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, 2 OC-3 Integrated Daughter Card
(IDC), Dual P/S
ASR1001-4XT3
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, 4 T3 Integrated Daughter Card
(IDC), Dual P/S
ASR1001-HDD
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, Hard Disk Drive (HDD), Dual P/S,
ASR1001-4x1GE
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, 4 GE Integrated Daughter Card
(IDC), Dual P/S
Chapter 1: Routing
1-37
Rout i ng
Minimum Cisco IOS
Release
ASR1001-8xCHT1E1
Cisco ASR1001 System, Fixed ESP & RP, Crypto, 4 Built-in GE, 8 Channelized T1/E1 Integrated
Daughter Card (IDC), Dual P/S
ASR1002
Cisco ASR1002 chassis,4 built-in GE, Dual P/S,4GB DRAM
ASR1004
Cisco ASR1004 chassis, Dual P/S
ASR1006
Cisco ASR1006 chassis, Dual P/S
ASR1013
Cisco ASR1013 chassis, Dual P/S
For More Information
http://www.cisco.com/go/asr1000
Cisco ASR 900 Series Aggregation Services Routers
The Cisco ASR 900 Series delivers on the Cisco Unified Ethernet Access
vision by having a single product family with one software and system
architecture to enable service providers to offer Ethernet transport
services across access and aggregation networks for business access,
mobile backhaul, residential, and other deployments.
The Cisco ASR 903 Router is Cisco’s first product built specifically for the
pre-aggregation function in networks that target convergence of wireless
and wireline services. A natural extension to Cisco’s service provider
access and aggregation portfolio, the Cisco ASR 903 Router extends the reach of the portfolio with a smallfootprint, redundant, modular, and industrial temperature-hardened device.
The Cisco ASR 903 Route Switch Processor (RSP) provides the central control and forwarding capabilities of
the router with rich clocking and management interfaces. I/O connectivity is provided through hot-swappable
Interface Module (IM) cards. The IM cards can deliver DS-0 to OC-12 TDM/ATM and n x 10-Mbps Ethernet to n x
10-Gigabit Ethernet connectivity into service provider access and aggregation networks at wire speeds of up
to 55 Gbps.
The Cisco ASR 903 Routers combine Layer 2 and Layer 3 networking capabilities with a high-bandwidth, highperformance architecture, including hardware-based forwarding of Circuit Emulation, Ethernet Operations,
Administration and Maintenance (E-OAM) protocols, Multiprotocol Label Switching (MPLS), Multiprotocol Label
Switching Transport Profile (MPLS-TP), IPv4, and IPv6.
The Cisco ASR 903 Router architecture, software redundancy and hardware redundancy provide a highavailability platform. Additionally, the modular Cisco IOS XE Software facilitates In Service Software Upgrade
(ISSU).
Ideal for Companies that Need These Features
Cisco ASR 903
•
•
•
•
•
•
High availability with Redundant Switch Processor and In Service Software Upgrade
Flexible interface option with modular interface cards
Redundant power with 2 modular power supplies; AC and DC power supplies available
Single platform for both mobile wireless and wireline access and aggregation
Capable of operating in extended temperature range
Ability to deploy in tight spaces with small footprint
Key Features and Benefits
• Flexible deployment options—The Cisco ASR 903 Router is designed with a 3RU compact form factor to
accommodate deployment in small spaces. Combined with various mounting options, the Cisco ASR 903
Routers can be deployed in space-constrained places such as ETSI 300mm cabinets. The side-to-side
airflow design allows for two Cisco ASR 900 Series Routers to be mounted back-to-back in a 600mm
cabinet. The wide temperature range supported by the Cisco ASR 903 Routers allows the router to be
deployed in locations with minimum environmental control. Small footprint and extended temperature
range support allows service providers to extend the reach of their Carrier Ethernet networks to various
types of locations and save money on air conditioning.
• High availability—The Cisco ASR 903 Router offers in-box hardware redundancy for all hardware
components and supports software redundancy with ISSU when two Route Switch Processors are
inserted in the chassis.
• Modularity—Cisco offers a choice of two Route Switch Processors (RSPs) providing different service scale
and a wide range of LAN and WAN Interface Modules (IMs). The LAN interfaces are available in copper and
fiber Ethernet interfaces with speed ranging from 10 Mbps to 10 Gbps. The WAN interfaces are available in
speeds ranging from DS-0 to OC-12. IMs, power supplies, and the fan tray are all modular and fully
upgradable when future generations are released.
• Industry standards certifications—The Cisco ASR 903 Router is certified for both Network Equipment
Buildings Standards Level 3 (NEBS3) and European Telecommunications Standards Institute (ETSI)
standards.
• Timing and synchronization services—The Cisco ASR 903 Router provides the timing services required in
today’s converged access networks to support mobile solutions, including Radio Access Network (RAN)
applications, and offers integrated support for the Building Integrated Timing Supply (BITS), 10MHz, 1 Pulse
Per Second (PPS), and Time Of Day (TOD) interfaces. The Cisco ASR 903 also supports synchronous
Ethernet (SyncE) and IEEE-1588, and it can also act as the source for network clocking information.
• Cisco Carrier Ethernet application-specific integrated circuit (ASIC)—Powered by the Cisco’ Carrier
Ethernet ASIC, designed specifically for the needs of service providers, the Cisco ASR 903 Router delivers
essential Carrier Ethernet technologies including: VLAN translation, selective QinQ, hierarchical QoS (H1-38
Chapter 1: Routing
Specifications
Model
Cisco ASR 903
Dimensions (H x W x D)
5.22 x 17.44 x 9.22 in. (132.6 x 443 x 234.2 mm)
Chassis Height
3RU
Cisco ASR 900 Series RSP
Dual redundant RSPs in 2 slots
Cisco ASR 900 Series IMs
6 Interface Module slots
“Commons” Components
•
•
•
•
•
•
•
•
Reliability and Availability
Two RSPs
One fan tray
Two Power Supplies (either DC or AC)
Fan redundancy
Feed redundancy
Power-supply redundancy
RSP redundancy
Software redundancy
Rack Mounting
Yes:
• ETSI
• 19 inch
• 23 inch
Airflow
Side-to-Side
Capacity
RSP
Thermal
Power
•
•
•
•
•
•
•
•
•
55Gbps
Active /Standby non-blocking operation mode in dual RSP redundant configuration
Fully redundant in dual RSP redundant configuration
Built-in service-intelligence and traffic- prioritization capability
Twelve high-efficiency fans per tray
Variable-speed fans for optimal thermal performance
Fully operational in single fan failure scenario
Maximum 550Watt input power
Up to 2 power supplies (AC or DC)
Note: Mixing of AC and DC modules is not supported.
• Module redundancy: 1:1
• Modules operate in load share mode.
Selected Part Numbers and Ordering Information
Cisco ASR 903 Series Aggregation Services Routers —Chassis, Fan tray, RSPs, Power supplies
ASR-903
ASR 903 Router Chassis
A903-FAN
ASR 903 FAN Tray
A900-PWR550-A
ASR 900 550W AC Power Supply
A900-PWR550-D
ASR 900 550W DC Power Supply
A900-RSP1A-55
ASR 900 Route Switch Processor 1, Base Scale, 55Gbps
A900-RSP1B-55
ASR 900 Route Switch Processor 1, Large Scale, 55Gbps
Cisco ASR 903 Series Aggregation Services Routers —Interface Modules
A900-IMA8T
ASR 900 8 port 10/100/1000 Ethernet Interface Module
A900-IMA8S
ASR 900 8 port SFP Gigabit Ethernet Interface Module
A900-IMA1X
ASR 900 1 port 10GE XFP Interface Module
A900-IMA16D
ASR 900 16 port T1/E1 Interface Module
Chapter 1: Routing
1-39
Rout i ng
QoS), Multiprotocol Label Switching (MPLS), and Hierarchical Virtual Private LAN Services (H-VPLS). The
ASIC provides line-rate performance and offers advanced services including access control list (ACL) and
H-QoS without affecting performance. The Carrier Ethernet ASIC incorporates innovative trafficmanagement capabilities while providing intelligent packet switching and routing operations.
• Service richness—With the Cisco ASR 903 Router, customers will be able to deliver services ranging from
basic TDM, ATM, and Ethernet services to advanced feature-rich and secure MPLS services, including
Pseudo Wire Emulation (PWE), Carrier Ethernet (CE), Multiprotocol Label Switching Transport Profile (MPLSTP), MPLS Layer 2 VPNs (MPLS L2VPNs), and MPLS Layer 3 VPNs. The service offering is enhanced with
rich operations, administration, and management (OAM) functions including: IEEE 802.1ag Connectivity Fault
Management (CFM), IP service-level agreement (IP SLA), Y.1731 Fault Management and Performance
Management, Bidirectional Forwarding Detection (BFD), and MPLS OAM.
A900-IMA4OS
ASR 900 4 OC3/STM1 or 1 OC12/STM4 Interface Module
Cisco ASR 903 Series License Options
Metro Services
Layer 2 feature license targeted for Layer 2 aggregation:
• Enhanced QoS, with deep buffers and Hierarchical QoS
• Layer 2 features for L2 VPN including EVC framework
• Ethernet OAM
• Synchronous Ethernet
• IPv4/IPv6 host connectivity
Metro IP Services
Layer 3 feature license targeted for Layer 3 aggregation:
• IP routing protocols (OSPF, ISIS, EIGRP)
• Layer 3 multicast PIM SM and SSM
• Bidirectional Forwarding Detection (BFD)
• Multi-VRF CE (VRF lite) with service awareness
• IEEE 1588-2008 Ordinary Clock and Transparent Clock
Metro Aggregation Services
MPLS feature license targeted for MPLS aggregation:
• BGP
• MPLS label imposition/disposition
• MPLS Traffic Engineering (TE) and Fast Reroute (FRR)
• Pseudowire Emulation (EoMPLS/CESoPSN/SAToP)
• MPLS VPN
• VPWS/VPLS/H-VPLS
• MPLS OAM
• MPLS Transport Profile (MPLS-TP)
ATM License
The ATM license allows service providers to enable ATM functionality on TDM interfaces only
when required. One license is required for each chassis that needs ATM functionality to be
enabled in the system. This includes ATM Pseudo Wires over MPLS (ATMoMPLS), ATM local
switching, ATM interworking and local ATM termination
1 OC3 port license
The OC3 port license allows service providers to enable 1 OC3 port only when required,
supporting a pay-as-you-grow strategy. One license is required for each OC3 port that needs to
be enabled in the system.
1 OC12 port license
The OC12 port license allows service providers to enable 1 OC12 port only when required,
supporting a pay-as-you-grow strategy. One license is required for each OC12 port that needs
to be enabled in the system.
1588-2008 BC/MC license
The 1588-2008 license allows service providers to enable IEEE 1588-2008 Boundary Clock
(BC) and/or Master Clock (MC) only when required. One license is required for each chassis that
needs IEEE 1588-2008 BC or MC functionality to be enabled in the system.
For More Information
http://www.cisco.com/go/asr900
Connected Grid Routers
Cisco 2000 Series Connected Grid Router
The Cisco Connected Grid portfolio of solutions is designed
specifically for the harsh, rugged environments often found in the
energy and utility industries. These solutions include the
Cisco 2010 Connected Grid Router (CGR 2010), which has been
designed to support the communications infrastructure needs of
the energy delivery infrastructure across the generation,
transmission, and distribution sectors. This infrastructure includes utility- and customer-owned energy
infrastructure such as substation applications supporting electrical transmission and distribution, renewable
generation, oil and gas, water, distributed generation, co-generation, and trackside operations. The
infrastructure also includes communications infrastructure for delivery applications such as transmission
pipelines, distribution mains, and service lines for oil and gas and water. Designed for highly secure, reliable,
and scalable infrastructure, the CGR 2010 is an ideal platform to support the Smart Grid and other energy
delivery infrastructure needs of customers. These ruggedized products have been extensively tested and are
KEMA certified to meet challenging substation compliance standards, including IEEE 1613 and IEC 61850-3.
The Cisco CGR 2010 is a rugged router optimized for use in the multitude of different communication networks
found in the energy and utility industries. One example application for the Cisco CGR 2010 is for substation
networks in harsh environments common in utility transmission and distribution substations. The CGR 2010
provides operators with the benefits of improved security, manageability, and network reliability. The CGR 2010
uses Cisco IOS Software, which is the operating system powering millions of Cisco routers deployed
worldwide. Cisco IOS Software delivers the benefits of integrated security for North American Electric
Reliability Corporation/Critical Infrastructure Protection (NERC/CIP) compliance, quality of service, and network
management to help ensure integrity and priority of operational data communications.
Primary Cisco CGR 2010 features:
1-40
Chapter 1: Routing
Rugged industrial design, featuring no fans or moving parts, and an extended operational temperature range
Substation compliance with IEC-61850-3 and IEEE 1613 for utility substation environments
Integrated security to help address compliance with critical infrastructure protection mandates
High availability design for maximum network uptime and redundancy
Network and device management tools for deployments, upgrades, and remote monitoring
Advanced quality of service (QoS) capabilities to support mission-critical communications such as
substation communications such as SCADA (Supervisory Control and Data Acquisition)
• Comprehensive network security features based on open standards
Specifications
Feature
Cisco CGR 2010
Grid Router WAN Interface
Card (GRWIC) Slots
4
Gigabit Ethernet density
2 (dual-purpose ports: 100/1000 fiber SFP and/or 10/100/1000 Gigabit copper)
T1/E1 WAN Module
Yes—1 or 2 port T1/E1 CSU/DSU module
Serial RS-232 Module
Yes—Up to 8 ports on a single module. 32 ports maximum with all 4 slots populated
Ethernet Switch Module
Yes—6-port or 10-port module
Flash Memory (External)
256 MB (default) – second compact flash slot can be populated with additional flash memory
DRAM Memory
1024 MB (default)
Power Supply
External high AC/DC and low DC power supply options available for redundant power supply
support
Dimensions (H x W x D)
3.5 x 17.25 x 15 in. (88.9 x 438.2 x 381 mm)
Selected Part Numbers and Ordering Information
CGR-2010/K9
Cisco CGR2010 w/2GE, 4 GRWIC slots, 256MB CF, 1GB DRAM, IPB
CGR-2010-SEC/K9
Cisco CGR2010 security bundle w/SEC license PAK
For More Information
http://www.cisco.com/go/cgr2000
Small Business Routers
Cisco SRP 500 Series Services Ready Platforms
The Cisco SRP 500 Series Services Ready Platforms are flexible, cost-effective
fixed-configuration customer premises equipment (CPE) with embedded
intelligence to enable service providers to create, provision, and deploy premium
revenue-generating services--a variety of high-quality IP voice, data, security,
wireless, and application services--to small businesses on an as-needed basis.
These platforms will help enable service providers to deliver differentiated,
converged service offers that increase bandwidth usage and average revenue
per user while reducing customer churn.
Key Features and Benefits
• Embedded intelligence to support a variety of high-quality voice, data, security, wireless, and application
services.
• Integrated voice ports powered by an industry-leading voice Session Initiation Protocol (SIP) stack to deliver
clear, high-quality voice service.
• Integrated stateful packet inspection (SPI) firewall and high-speed IP Security (IPsec) VPN capabilities with
support for Triple Data Encryption Standard (3DES) to help keep small business data safe.
• 4-port managed Ethernet switch to connect devices in the office. One port can be designated as the
network edge, while VLAN support allows for highly secure segmentation of network resources.
• Integrated 802.11n wireless access point to enable employees to connect to the network while away from
their desks.
• Third-generation (3G) wireless data readiness with built-in USB modem drivers.
• Interoperability with industry-leading DSL access multiplexers (DSLAMs), soft switches, and voice gateways
to enable scalable, end-to-end multiservice network deployments.
• Support for industry-standard TR-069 and XML-based provisioning for zero-touch deployments.
• Easy integration with other Cisco Small Business Series products to enable adaptability as customer needs
change.
Chapter 1: Routing
1-41
Rout i ng
•
•
•
•
•
•
Specifications
Feature
Cisco SRP 521W
Cisco SRP 526W
Cisco SRP 527W
WAN
10/100 Mbps
Fast Ethernet
Asymmetric DSL (ADSL) 2+
Annex B
ADSL 2+
Annex A
Backup WAN
Wireless data using
supported 3G USB modem
Wireless data using
supported 3G USB modem
Wireless data using
supported 3G USB modem
LAN
4 ports
10/100 Mbps
Fast Ethernet
4 ports
10/100 Mbps
Fast Ethernet
4 ports
10/100 Mbps
Fast Ethernet
Voice Ports
2 FXS, 1 FXO (relay
2 FXS, 1 FXO (relay
2 FXS, 1 FXO (relay
USB 2.0 Ports
1
1
1
Selected Part Numbers and Ordering Information
Ethernet
SRP521W-K9-G1
Cisco SRP 521W, FE WAN, 802.11n FCC, 2FXS/1FXO, US power
SRP521W-K9-G5
Cisco SRP 521W, FE WAN, 802.11n ETSI, 2FXS/1FXO, EU/UK power
SRP521W-K9-G4
Cisco SRP 521W, FE WAN, 802.11n non-FCC, 2FXS/1FXO, ANZ power
ADSL2/2+
SRP526W-K9-G5
Cisco SRP 526W, ADSL2+ Annex B, 802.11n ETSI, 2FXS/1FXO, EU/UK power
SRP527W-K9-G1
Cisco SRP 527W, ADSL2+ Annex A, 802.11n FCC, 2FXS/1FXO, US power
SRP527W-K9-G4
Cisco SRP 527W, ADSL2+ Annex A, 802.11n non-FCC, 2FXS/1FXO, ANZ power
SRP527W-K9-G5
Cisco SRP 527W, ADSL2+ Annex A, 802.11n ETSI, 2FXS/1FXO, EU/UK power
For More Information
http://www.cisco.com/go/srp500
Cisco RV Series Small Business Routers
The Cisco RV Series Wireless-N VPN Firewall combines highly secure
connectivity—to the Internet as well as from other locations and remote
workers—with a high-speed, 802.11n wireless access point, a 4-port
switch, an intuitive, browser-based device manager, and support for the
Cisco FindIT Network Discovery Utility, all at a very affordable price. Its
combination of high performance, business-class features, and topquality user experience takes basic connectivity to a new level.
Key Features and Benefits
• High-speed, standards-based 802.11n wireless connectivity to help employees stay productive while away
from their desks
• Integrated 4-port 10/100 switch with quality of service (QoS) support for enhanced voice, video, and data
traffic
• Support for separate “virtual” networks enables you to control access to sensitive information and to set up
highly secure wireless guest access
• IP Security (IPsec) VPN support with hardware acceleration to deliver highly secure, high-performance
connections to multiple locations and traveling employees
• Support for static routing, Routing Information Protocol (RIP) Versions 1 and 2, and inter-VLAN routing to
enable flexible connection sharing
• Proven stateful packet inspection (SPI) firewall, plus advanced wireless security to help keep business
assets safe
• Simplified configuration through an intuitive, browser-based device manager
• Support for the Cisco FindIT Network Discovery Utility.
Specifications
Feature
Cisco RV110W
Cisco RV120W
Cisco RV220W
WAN
10/100 Mbps
Fast Ethernet
10/100 Mbps
Fast Ethernet
10/100/1000 Mbps
Gigabit Ethernet
Wireless Support
802.11n
802.11n
802.11a/b/g/n
LAN
4 ports
10/100 Mbps
Fast Ethernet
4 ports
10/100 Mbps
Fast Ethernet
4 ports
10/100/1000 Mbps
Gigabit Ethernet
1-42
Chapter 1: Routing
IPsec
IPsec
SSL and IPsec
Maximum VPN
Connections
5
10
5 (SSL)
25 (IPsec)
Optional Cisco ProtectLink
Gateway Security
No
No
Yes
Rout i ng
VPN
Connectivity
Online model comparison chart: http://www.cisco.com/en/US/products/ps9923/prod_models_comparison.html
Selected Part Numbers and Ordering Information
RV110W
Cisco RV 110W Wireless-N VPN Firewall
RV120W
Cisco RV 120W Wireless-N VPN Firewall
RV220W
Cisco RV 220W Wireless-N VPN Firewall
For More Information
http://www.cisco.com/go/smbrouters
Cisco Routing Services
Cisco Routing and Switching Services use leading practices and time-tested methodologies to help you to:
• Successfully integrate new technologies and applications onto the routing and switching platform
• Reduce risk, delays, and the total cost of network deployments
• Keep network devices and applications secure, available, and operating reliably
• Optimize your secure wired and wireless networks to meet future needs
• Achieve operational excellence
Services from Cisco and our partners help you plan, build, and run a more intelligent, responsive, integrated
routing and switching network. Services for routing and switching include:
• Routing and Switching Planning Services
Support successful integration through accurate assessment of the network and overall readiness to
support proposed solutions.
• Routing and Switching Design Services
Reduce risk, delays, and the total cost of network deployments with an implementation-ready design that
you can use to engineer your network.
• Cisco Network Optimization Service
Optimize your network for borderless business evolution and innovation using Cisco expertise and leading
practices.
• Cisco Network Availability and Operations Optimization Service
Effectively adopt, manage, and scale technologies and applications in your converged network environment
by optimizing your operational processes and network management tools.
• Cisco SMARTnet Service
Direct, anytime access to Cisco engineers and an extensive range of technical resources.
• Cisco Application Support Service
Strengthen application availability, functionality, and reliability.
• Cisco Focused Technical Support Service
Priority, high-touch technical support for faster issue resolution.
• Cisco Foundation Technology Remote Management Service
Comprehensive monitoring, issue resolution, and day-to-day management of network devices.
For more information about Cisco Routing and Switching Services, visit http://www.cisco.com/go/services/
routing-switching.
Chapter 1: Routing
1-43
1-44
Chapter 1: Routing
Download PDF