HILCAST TM
WEBCAST AUCTION
By order of the United States Bankruptcy Court, Northern District of Ohio, Akron Division,
Chapter 11, Case Number 08-51424-mss
STATE OF THE ART THERMOFORMING
AND DIE CUTTING FACILITY
Tuesday, July 29th • Beginning at 10am Local Time
Macedonia, OH
Hilco Industrial, LLC
A u c t i o n e e r s
•
L i q u i d a t o r s
•
Sale is being held in conjunction with
A p p r a i s e r s
31555 West Fourteen Mile Road, Suite 207
21700 Northwestern Hwy • Suite 1180
896 Main Street
Southfield, Michigan 48075-4923
Branford, Connecticut 06405
Ph 248.254.9999 • Fx 248.254.9995
Ph: 248.569.9781 • Fx 248.569.9793
Ph: 203.488.7020 • Fx: 203.488.4577
www.hilcoind.com
www.maynards.com
www.thebranfordgroup.com
Farmington Hills, Michigan 48334
HILCASTTM WEBCAST AUCTION
By order of the United States Bankruptcy Court,
Northern District of Ohio, Akron Division, Chapter 11,
Case Number 08-51424-mss
ILCF COLD FORMING LINES
TUESDAY, JULY 29TH
Beginning at 10am Local Time
Preview Date
Monday, July 28th • 9am to 4pm Local
Auction Location
8146 Bavaria Dr. E.
Macedonia, OH 44056-2248
OVERVIEW OF ILCF
COLD FORMING LINE #1
Bid Live in person, or on the web at
www.hilcoind.com
Directions to Sale
From Cleveland Hopkins International Airport:
Exit Airport onto I-480 East. Travel East on I-480
to Exit #37, Rte 91/Darrow Rd., Turn Right on
Rte91/Darrow Rd., Travel 1 Mile South to
Enterprise Pkwy. (Just past Cemetery.) Turn
Right on Enterprise Pkwy., Proceed 3/4 Mile to
Bavaria Rd. on Left. Turn Left on Bavaria Rd.
Proceed 1/2 Mile to Plant on Left.
Travel Information
Airlines:
American Airlines . . . . . . . . . . . . . . . 800.433.7300
Northwest Airlines . . . . . . . . . . . . . . . 800.225.2525
United Airlines . . . . . . . . . . . . . . . . . . 800.241.6522
Delta Airlines . . . . . . . . . . . . . . . . . . . 800.221.1212
Southwest Airlines . . . . . . . . . . . . . . 800.435.9792
Hotels:
Hilton Garden Inn (Twinsburg) . . . . . 330.405.4488
Comfort Suites (Twinsburg) . . . . . . . 330.470.4036
Hampton (Solon) . . . . . . . . . . . . . . . 440.542.0400
Spring Hills Suites-Marriot (Solon) . . 440.248.9600
Homewood Suites-Hilton (Solon) . . . 440.519.9500
Marriott (Solon) . . . . . . . . . . . . . . . . . 440.542.2349
Further Information
• A buyer’s premium will be in effect.
The auction will be conducted in English,
accepting U.S. Currency only.
• Removal Deadline is Friday, August 15, 2008
with Hours of Removal between 8am to 4pm
Monday thru Friday. After August 15th at 4pm
buyer will incur a cost of $500 daily for
entry into the facility.
• For further information please contact
George Laidlaw at 616.233.0702 or
Email glaidlaw@hilcoind.com
• For Payment & Customer Service
please contact:
Sandi Neely at 248.254.9999 x16
or Email sneely@hilcoind.com
CLEARING NIAGARA HBM-175-8-10, 175-TON
HYDRAULIC DIE CUTTING PRESS BRAKES
FANUC MODEL M-16I 6-AXIS CNC ROBOTS, 3
RIGHT SIDE, 3 LEFT SIDE, TYPE A05B-1212-B202
ILCF COLD FORMING LINES
ILCF #1 LINE INCLUDING:
ILCF COLD FORMING LINE #2 INCLUDING:
Note: Lines May Be Offered In Bulk - Subject to Piecemeal Bids
1 – BUTLER AUTOMATIC MODEL 660LD5, 60” DUAL
POSITION UNWIND STAND, S/N J0005075-IRH, 50” O.D.
on 3” Cores, 19-Roll Vertical Traversing Accumulator,
Butler DataMat Programmable Digital Control, Disc Brake
2 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC
SCISSORS LIFT TABLES, S/Ns NA, Sliding Base, Floor
Track Mounted, Custom Rack & Pinion Shuttle Car Top
1 – CLEARING NIAGARA MODEL HBM-175-8-10, 175-TON
HYDRAULIC DIE CUTTING PRESS BRAKES,
S/N P54017, P54020 (1996), 72” x 80” Permanently
Flanged Bed, 10' Overall Bed, 102” Between Housings, 7”
Closed Height, 17” Open Height, 8” Throat, 6'6” x 1/2"
Maximum Capacity, Top Mounted Hydraulics, Mini-Screen
Light Curtain, Zone-Guard Safety Mat System, S/N P54020
Mounted on Sliding Base, With Square Box Ways & Electric
Motorized Travel Screw
1 – ACCO WRIGHT WAY 2-TON ELECTRIC CHAIN HOIST
(PRESS BRAKE MOUNTED), (4) FANUC MODEL M-16i
6-AXIS CNC ROBOTS, TYPE A05B-1212-B202,
S/Ns R97X76186 (1997), R97976112 (1997), R97X76185
(1997), R99176359 (1999), Each, With M-16i Main Power
Supply, Fanuc System R-J2 Remote Control, With Hand
Pendant
4 – NORDSON FOAM MELT 200 ADHESIVE MELTING/
DISPENSING
SYSTEMS,
S/Ns
AN07F00235,
AN05B00128, AN01F00013, AN05C00134, 450 Degree
Fahrenheit Maximum, Vista Programmable Controls, Each
Mounted on Cardinal 1000-LB. x 36” x 36” Electronic
Platform Scale
2 – NORDSON MODEL 5554 BULK MELTER APPLICATORS,
S/Ns AN00J00029, AN00J00028, Programmable Electric
Heat, 55 Gallon Drum, 2-Post Lift, Pneumatic Pump
2 – VIDEO JET MODEL EXCEL 273e AUTO FLUSH
PROGRAMMABLE
INK-JET
PRINTERS,
S/Ns 13980B0007WD, 990470001WD
1 – CUSTOM BUILT 72” W X 72” L COOLING TUNNEL,
WITH (4) MOVIN-COOL PORTABLE AIR CONDITIONING
UNITS, S/Ns NA, Classic Plus 26 Programmable Controls
1 – 60” WIDE X APPROXIMATELY 65' LONG THRU-FEED
TRANSFER LINE CONVEYOR, With Chicago Electric
Control Console, Emerson PLC Controls, Allen Bradley
Versa View CE 1500H Touch Screen
1 – 60” MOTORIZED REWIND TAKE-UP STAND,
Variable Speed
1 – VIDEO MONITOR SYSTEM, With (2) Remote Camera
Heads, (2) Monitors
1 – XYCOM AUTOMATION, With Dell PC Unit
1 – ROSENTHAL MODEL WA-S-5IBE-24, 60” SHEETER, S/N 80761,
Unwind Arbor, With Pneumatic Disc Brake, Variable Speed Control,
Programmable Length & Batch Controls, Mini-Screen Light Curtain
2 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS LIFT
TABLES, Sliding Base, Floor Track Mounted, Custom Rack & Pinion
Shuttle Car Top
2 – CLEARING NIAGARA MODEL HBM-175-8-10, 175-TON HYDRAULIC
DIE CUTTING PRESS BRAKES, S/N P54245 (1996), P54246 (1996),
6' x 80” Permanently Flanged Bed & Ram, 10' Overall Bed, 102” Between
Housings, 7” Closed Height, 17” Open Height, 8” Throat, 6'6” x 1/2 “
Maximum Capacity, Top Mounted Hydraulics, Mini-Screen Light Curtain,
Zone-Guard Safety Mat System, S/N P54246, Mounted on Sliding Base,
With Square Box Ways & Electric Motorized Travel Screw
1 – COFFING 1-TON ELECTRIC CHAIN HOIST, With 20' Monorail,
Press Brake Mounted
6 – FANUC MODEL M-16i 6-AXIS CNC ROBOTS, 3 RIGHT SIDE, 3 LEFT
SIDE, TYPE A05B-1212-B202, S/Ns R02276211 (2002), R00976323
(2000), R98676833 (1998), R02276210 (2002), R99176363 (1999),
R02276212 (2002), Each, With M-16i Main Control & Fanuc System
R-J3 Remote Controller, With Hand Pendant
4 – NORDSON FOAM MELT 200 ADHESIVE MELTING/DISPENSING
SYSTEMS, S/Ns AN05C00130, AN0300073, AN03G00071, AN03G00074,
450 Degree Fahrenheit Maximum, Vista Programmable Control, Mounted
on Cardinal 1000-LB. x 36” x 36” Electronic Platform Scale
2 – #8 & 7 NORDSON FOAM MELT 190 ADHESIVE MELTING/
DISPENSING SYSTEMS, S/Ns AN00B31359, AN97J22482
1 – NORDSON BM SERIES ADHESIVE SUPPLY SYSTEM ADHESIVE
PUMP, S/N L003G04690 (2003), 55 Gallon Drum, Pneumatic Pump,
2-Post Frame Lift
1 – NORDSON MODEL 5554 BULK MELTER APPLICATOR,
S/N AN00J00025, 55 Gallon Drum, Pneumatic Pump, 2-Post Lift
1 – CUSTOM 54” W X 120” L COOLING TUNNEL, With (3) Movin-Cool
Portable Air Conditioning Units, Model & S/N NA, Classic Plus 26
Programmable Digital Controls
2 – VIDEO JET EXCEL 273se AUTO FLUSH INK JET PRINTERS,
S/Ns 011790106WDR, 023540029WD
1 – CHICAGO ELECTRIC 53” W X 75' L THRU-FEED TRANSFER LINE
CONVEYOR SYSTEM, Console Control, With Allen Bradley PLC Control
& Versa View CE1500H Touch Screen
1 – VIDEO MONITOR SYSTEM, With (2) Conex BW-CMOJ Remote
Cameras, (2) 12” Monitor Screens
1 – 54” MOTORIZED REWIND TAKE-UP STAND, Variable Speed Control
4 – A.W.T. 48” X 18' NYLON WIRE MESH BELT OUTFEED CONVEYORS,
(1 + 1 In -Line Each) (1999), Variable Speed, With Digital Belt Speed
Readout
2 – CUSTOM BUILT 48” X 48” LIGHT TABLE INSPECTION TABLES
2 Visit www.thebranfordgroup.com to register and bid at this auction
DIE CUTTING PRESS BRAKES • UV PRINTING LINES
CUSTOM BUILT 72” W X 72” L COOLING TUNNEL,
WITH (4) MOVIN-COOL PORTABLE AIR CONDITIONING UNITS
ROSENTHAL MODEL WA-S-5IBE-24,
60” SHEETER
7-BULB VARIABLE
POWER SUPPLIES
1998
(1 OF 2) CLEARING NIAGARA
HBM-175-8-10, 175-TON HYDRAULIC
DIE CUTTING PRESS BRAKES
AWT HI-TECH V MODEL APV-5280 SCREEN PRINTING
PRESS & AWT MODEL ADV-TO-80, 60” TAKE-OFF TABLE
FUSION UV SYSTEMS UV CURING UNIT
UV PRINTING LINES
Note: Lines May Be Offered in Bulk – Subject to Piecemeal Bids.
UV PRINT LINE #5 INCLUDING:
(1 OF 2) VERSON MODEL 206-65,
65-TON MECHANICAL DIE CUTTING
PRESS BRAKES
DIE CUTTING PRESS BRAKES
2 – CLEARING
NIAGARA
HBM-175-8-10,
175-TON HYDRAULIC DIE CUTTING PRESS
BRAKES, S/Ns P54018 (1996), P52399
(1994), 36” x 72” Permanently Flanges Bed &
Ram, 10' Overall Bed Length, 102” Between
Housings, 7” Closed Height, 17” Open Height,
8” Throat, 6'6” x 1/2” Maximum Capacity, Top
Mounted Hydraulics, Mini-Screen Light
Curtain, Zone-Guard Safety Mat System
1 – NIAGARA MODEL HBM-175-8-10, 175-TON
HYDRAULIC PRESS BRAKE, S/N P53438,
10' Overall Bed & Ram, 42” x 6' Permanently
Flanged Bed & Ram (Not In Service –
Disassembled – Missing Hydraulic Cylinders)
2 – VERSON
MODEL
206-65,
65-TON
MECHANICAL DIE CUTTING PRESS
BRAKES, S/Ns 24586, 25769, 37” x 8'
Permanently Flanged Bed & Ram, 8' Overall
Bed Length, 78” Between Housings, 18”
Throat, 46” x 8' Bolt-On Platens, Mini-Screen
Light Curtain, Zone-Guard Safety Mat System
UV PRINT LINE #3 INCLUDING:
1 – AWT HI-TECH V MODEL APV-5280 SCREEN PRINTING PRESS,
S/N 60144-1 (1998), Uni OP Programmable Control Pad, Independent
Carriage Stroke, 750 IPH, 52” x 80” Maximum Print Area, 75” x 96”
Maximum Screen Frame, 1” Maximum Print Thickness, Pneumatic
Squeegee Pressure Equalizer, Squeegee/Floor Bar Angle & Speed
Adjustments, Sliding Manual Bar Clamps, Advanced Ink Recovery System,
Micro-Registration System, 2” Thick Vacuum Table
1 – CARDINAL 2268-LB. X 60” X 60” ELECTRONIC PLATFORM SCALE
1 – PNEUMATIC DIAPHRAGM PUMP
1 – AWT MODEL ADV-TO-80, 60” TAKE-OFF TABLE, With Pneumatic
Grippers, S/N 60144-2 (1998)
1 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS LIFT
TABLE, On Sliding Track
1 – FUSION UV SYSTEMS UV CURING UNIT, S/N NA, Thru Feed
Conveyorized, 72” Wide x 25' Long Belt, Vacuum Bed, Top Exhaust, Bulb
Cooling Unit, 7-Bulb Variable Power Supplies, Control Panel Optimate
Programmable Keypad
1 – AWT HI-TECH V MODEL APV-5280 SCREEN PRINTING PRESS,
S/N 51232-2 (1998), Unit OP Programmable Control Pad, Independent
Carriage Stroke, 750 IPH, 52” x 80” Maximum Print Area, 75” x 96”
Maximum Screen Frame, 1” Maximum Print Thickness, Pneumatic
Squeegee Pressure Equalizer, Squeegee/Floor Bar Angle & Speed
Adjustments, Sliding Manual Bar Clamps, Advanced Ink Recovery System,
Micro-Registration System, 2” Thick Vacuum Table
1 – CARDINAL 2268-LB. X 60” X 60” ELECTRONIC PLATFORM SCALE
1 – PNEUMATIC DIAPHRAGM PUMP
1 – AWT MODEL ADV-TO-80, 60” TAKE-OFF TABLE, With Pneumatic
Grippers, S/N 40678 (1996)
1 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS LIFT
TABLE, On Sliding Track
1 – FUSION UV SYSTEMS UV CURING UNIT, S/N NA, Thru Feed
Conveyorized, 72” Wide x 25' Long Belt, Vacuum Bed, Top Exhaust, Bulb
Cooling Unit, 7-Bulb Variable Power Supplies, Control Panel Optimate
Programmable Keypad
1 – AWT HI-TECH V MODEL APV-5280 SCREEN PRINTING PRESS,
S/N 51232-1 (1998), Unit OP Programmable Control Pad, Independent
Carriage Stroke, 750 IPH, 52” x 80” Maximum Print Area, 75” x 96”
Maximum Screen Frame, 1” Maximum Print Thickness, Pneumatic
Squeegee Pressure Equalizer, Squeegee/Floor Bar Angle & Speed
Adjustments, Sliding Manual Bar Clamps, Advanced Ink Recovery System,
Micro-Registration System, 2” Thick Vacuum Table
1 – CARDINAL 2268-LB. X 60” X 60” ELECTRONIC PLATFORM SCALE
1 – PNEUMATIC DIAPHRAGM PUMP
1 – AWT MODEL ADV-TO-80, 60” TAKE-OFF TABLE, With Pneumatic
Grippers, S/N NA
1 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS LIFT
TABLE, On Sliding Track
1 – FUSION UV SYSTEMS UV CURING UNIT, S/N NA, Thru Feed
Conveyorized, 72” Wide x 25' Long Belt, Vacuum Bed, Top Exhaust, Bulb
Cooling Unit, 7-Bulb Variable Power Supplies, Control Panel Optimate
Programmable Keypad
1 – AWT HI-TECH V MODEL APV-5280 SCREEN PRINTING PRESS,
S/N 40678 (1996), Unit OP Programmable Control Pad, Independent
Carriage Stroke, 750 IPH, 52” x 80” Maximum Print Area, 75” x 96”
Maximum Screen Frame, 1” Maximum Print Thickness, Pneumatic
Squeegee Pressure Equalizer, Squeegee/Floor Bar Angle & Speed
Adjustments, Sliding Manual Bar Clamps, Advanced Ink Recovery System,
Micro-Registration System, 2” Thick Vacuum Table
1 – CARDINAL 2268-LB. X 60” X 60” ELECTRONIC PLATFORM SCALE
1 – PNEUMATIC DIAPHRAGM PUMP
1 – AWT MODEL ADV-TO-80, 60” TAKE-OFF TABLE, With Pneumatic
Grippers, S/N NA
1 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS LIFT
TABLE, On Sliding Track
1 – FUSION UV SYSTEMS UV CURING UNIT, S/N NA, Thru Feed
Conveyorized, 72” Wide x 25' Long Belt, Vacuum Bed, Top Exhaust, Bulb
Cooling Unit, 7-Bulb Variable Power Supplies, Control Panel Optimate
Programmable Keypad
UV PRINT LINE #4 INCLUDING:
UV PRINT LINE #2 INCLUDING:
PLEASE NOTE: This auction will be managed by the Branford Group.
Visit www.thebranfordgroup.com to register and bid at this auction.
To schedule an auction, please contact us at 248.254.9999
3
THERMOFORMING LINES • SRB APPLICATION LINES
Reconditioned
2007
VIEW OF THERMOFORMING LINES
Reconditioned
2007
DRYPOLL MODEL 3030 THRU-FEED IN-LINE 2-STATION
VACUUM THERMOFORMING MACHINE
1999
2000
OVERVIEW OF SRB APPLICATION LINES
VACUUM THERMOFORMING MACHINES
THERMOFORM LINE #1 INCLUDING:
1 – DUAL ROLL UNWIND STAND, 36”, (46” Maximum Opening) Variable Speed
Motorized Feed Roll
1 – DRYPOLL MODEL 3030 THRU-FEED IN-LINE 2-STATION VACUUM
THERMOFORMING MACHINE, S/N NA, (Reconditioned 2007), 34” x 120”
Retractable Top and Bottom Heating Ovens, 5-Zone Top Ceramic, 3-Zone
Bottom Calrod, End Cut-Off, Digital Heat Controls, Stationary 1st Form Station,
With 30” x 30” Platens, Traveling 2nd Trim Station, With 30” x 48” Platens, 48”
Travel, Vacuum Pump System
1 – FANUC MODEL M-16iB 6-AXIS ROBOT, S/N R06576054 (2006), Type
A05B-1216-B402 Fanuc System R-J3iC Control
1 – NORDSON BM SERIES MODEL BM200 BULK ADHESIVE SUPPLY SYSTEM,
S/N LU03G0473 (2003), 55 Gallon Drum, 2-Post Lift Pneumatic Pump,
Programmable Controls
1 – 45' LONG THRU-FEED TRANSFER CONVEYOR, With Dayton Vari-Speed
Controller
1 – CONTROL PANEL, With Allen Bradley Micrologix 1200 PLC, Allen Bradley
Power Flex 700S Drive Control, Panel View Plus 700 Programming Screen
THERMOFORM LINE#2 INCLUDING:
1 – FABRICATED ROLL STAND
1 – ARMAC MODEL 2530 VACU FORM THRU-FEED IN-LINE 2-STATION
VACUUM THERMO-FORMING MACHINE, S/N 30183 (Reconditioned 2007),
Retractable Top & Bottom Heating Oven, 6-Zone Digital Heat Controls, Stationary
Forming Station, With 25” x 30” Platens, Traveling Trim Station, Vacuum Pump
System
1 – ROBOT STAND (Robot Removed)
1 – 40' LONG SERVO DRIVE THRU-FEED TRANSFER CONVEYOR
1 – CONTROL CONSOLE, With Indramat CLM PLC Controls
THERMOFORM LINE #3 INCLUDING:
1 – FABRICATED UNWIND ROLL STAND, With 40” Variable Speed Motorized Feed
Rolls, Pneumatic Roll Tension Adjustment
1 – DRYPOL 2-STATION THRU-FEED IN-LINE VACUUM THERMOFORMING
MACHINE, S/N NA (Reconditioned 2007), 36” x 72” Retractable Top & Bottom
Electric Heating Ovens, Digital Bottom Heater Controls, Solid State Top Heater
Controls, Stationary Forming Station, With 34” x 24” Platens
1 – TRAVELING TRIM STATION, With 34” x 24” Platens, 36' Long Thru-Feed
Transfer Conveyor, With Dayton Vari-Speed Control & Servo Drive, Vacuum
Pump System, Koyo Direct Logic 205 PLC Controls
1 – PLASTI-VAC INC. MODEL 406X VACUUM THERMOFORMING PRESS,
S/N P406X-1398-688, Maximum Sheet Size 48” x 60”, Floor Track Mounted
Sliding Lower Bed, Top Mounted Infra-Red Cure Oven, (2) Heat Zones, 1-1/2-HP
Horizontal Tank Mounted Vacuum Pump
NORDSON MODEL 5554 BULK
MELTER APPLICATOR
NORDSON FM-200 & FM-190 ADHESIVE
MELTING & APPLICATION SYSTEMS
SRB APPLICATION LINES
Note: Lines May be Offered in Bulk Subject to Piecemeal Bids
SRB APPLICATION LINE #5 INCLUDING:
2 – A.W.T. SERI-GLIDE MODEL SG3648, 36” X 48” VACUUM TABLES, S/Ns 64161-3, NA (1999), Self-Contained Vacuum Pump Units
2 – A.W.T. MODEL APHT-T055 TAKE-OFF TABLES, S/Ns 62953-2 (1998), 62054-2 (1998), Each, With (3) Pneumatic Gripper Heads
2 – A.W.T. MODEL CONV-48, 48” X 14' POWER BELT CONVEYORS, S/Ns 103332 (2000), NA, Nylon Fabric Mesh Belt,
Accu-Cure Variable Speed Control, Electronic Sheet/Length Counter, Cooling Sections, With (2) Movin-Cool Model 24HFU-1
24,000 BTU Portable Cooling Units, S/Ns 0897-0090241, 0798-0217241 (1997 & 1998)
1 – MINI SCREEN 6-POINT LIGHT CURTAIN SYSTEM
1 – FANUC MODEL M-16i 6-AXIS CNC ROBOT, S/N R99176358 (1999), Type A05B-1212-B202, 20Kg Capacity, M-16i Power
Supply & Fanuc System, RJ-2 Controls, With Hand Pendant
1 – NORDSON MODEL 5554 BULK MELTER APPLICATOR, S/N AN00J00026 (2000)
1 – NORDSON MODEL FM-190 ADHESIVE MELTING & DISPENSING SYSTEM, S/N AN99E32796 (1999), Mounted on Cardinal
1000-LB. x 36” x 36” Electronic Platform Scale
SRB APPLICATION LINE #7 INCLUDING:
2 – A.W.T. SERI-GLIDE MODEL SG3648, 36” X 48” VACUUM TABLES, S/Ns 111806-3, 111806-4 (2001), Self-Contained
Vacuum Pump Units
2 – A.W.T. TAKE-OFF TABLES, With Pneumatic Gripper Heads, S/Ns NA
2 – A.W.T. MODEL CONV-48, 4' X 14' POWER BELT CONVEYORS, S/Ns 11805-1, 11805-3 (2001), Nylon Fabric Mesh Belt,
Accu-Cure Variable Speed Control, Electronic Sheet/Length Counter, Cooling Sections, With (2) Movin-Cool Model Classic
Plus 26, 24,000 BTU Portable Cooling Units, S/Ns 3898-0373-250, NA
1 – MINI-SCREEN 6-POINT LIGHT CURTAIN SYSTEM
1 – FANUC MODEL M-16i, 6-AXIS CNC ROBOT, S/N R00X76476 (2000), Type A05B 1212 B202, M-16i Power Supply & Fanuc
System RJ3 Remote Control & Hand Pendant
1 – NORDSON MODEL 5554 BULK MELTER APPLICATOR, S/N AN01C00050 (2001)
1 – NORDSON MODEL FM190 BULK ADHESIVE MELTER/APPLICATOR, S/N AN99A31157 (1999), Mounted on Cardinal 1000LB. x 36” x 36” Electronic Platform Scale
SRB APPLICATION LINE #9 INCLUDING:
2 – A.W.T. SERI-GLIDE MODEL SG3648, 36” X 48” VACUUM TABLES, S/N 127501-1, NA, Self-Contained Vacuum Pump Units
2 – A.W.T. MODEL APRT-T055 TAKE-OFF TABLES, With Pneumatic Gripper Heads, S/Ns 64161-4, 64161-3 (1999)
2 – A.W.T. MODEL CONV-48, 4' X 14' POWER BELT CONVEYORS, S/Ns 15063, 12306-2 (2000), Nylon Fabric Mesh Belt,
Accu-Cure Variable Speed Control, Electronic Sheet/Length Counter
2 – COOLING SECTIONS, WITH MOVIN-COOL MODEL CLASSIC PLUS 26, 24,000 BTU PORTABLE COOLING UNITS,
S/Ns 0905 0603 260/0500 017 XXX
1 – MINI SCREEN 6-POINT LIGHT CURTAIN SYSTEM
1 – FANUC MODEL M-16i, 6-AXIS CNC ROBOT, S/N R99X76286 (1999), Type A05B 1212 B202, M-16i Power Supply & Fanuc
RJ3 Remote Control, With Hand Pendant
1 – NORDSON MODEL 5554 BULK MELTER APPLICATOR, S/N AN01C00051 (2001)
1 – NORDSON MODEL FM190 BULK ADHESIVE MELTER/APPLICATOR, S/N AN97L22703, Mounted on Cardinal 2000-LB. x
36” x 36” Electronic Platform Scale
4 Visit www.thebranfordgroup.com to register and bid at this auction
SHEETER LINE • SILK SCREEN EQUIPMENT • SUPPORT • INVENTORY
OVERVIEW OF ROSENTHAL 60” SHEETER LINE
BECK 60” WIDE AUTO-SHEETER
ROTARY INDEX DUAL ROBOT SRB APPLICATION CELL
SRB APPLICATION LINES (CONTINUED)
Note: Lines May be Offered in Bulk Subject to Piecemeal Bids
SRB APPLICATION LINE #10 INCLUDING:
1 – CUSTOM BUILT 4-STATION 9-1/2' DIAMETER INDEXING
ROTARY TABLE
1 – MINI SCREEN LIGHT CURTAIN SYSTEM
1 – MOVIN-COOL MODEL CLASSIC PLUS 26 24000 BTU
PORTABLE COOLING UNIT, S/N NA
1 – FANUC MODEL M-16i, 6-AXIS CNC ROBOT, S/N R02176127
(2002), Type A05B-1212-B302, M-16i Power Supply & Fanuc
System RJ3 Remote Control & Hand Pendant
1 – NORDSON MODEL 5554 BULK MELTER APPLICATOR,
S/N AN00J00024 (2000)
1 – NORDSON MODEL FM190 BULK ADHESIVE MELTER/
APPLICATOR, S/N AN97M21511 (1997), Mounted on Cardinal
1000-LB. x 36” x 36” Electronic Platform Scale
SRB APPLICATION LINE #11 INCLUDING:
1 – CUSTOM BUILT 8-STATION 12' DIAMETER INDEXING ROTARY
TABLE
1 – MINI-SCREEN LIGHT CURTAIN SYSTEM
1 – MOVIN-COOL 24,000 BTU PORTABLE COOLING UNIT, S/N NA
2 – FANUC MODEL M-16i, 6-AXIS CNC ROBOTS, S/Ns R02276215,
R02276197 (2002)
2 – NORDSON MODEL FOAM MELT 200 ADHESIVE MELTING/
DISPENSING SYSTEMS, S/Ns AN06M00215 (2006), AN04K00115
(2004) Each Mounted on Cardinal 36” x 36” Electronic
Platform Scale
SHEETER LINE
ROSENTHAL 60” SHEETER LINE
INCLUDING:
Note: Line May be Offered in Bulk Subject to Piecemeal Bids
1 – DUAL ROLL UNWIND STAND
2 – VIDEO JET EXCEL 273se AUTO FLUSH INK JET PRINTERS,
S/Ns 030620003WD, 023540028WD
1 – ROSENTHAL MODEL WA-5-HUBUBEAA-24, 60” AUTOMATIC
SHEETER, S/N 81060 (2003)
1 – A.W.T. 60” TAKE-OFF TABLE, WITH PNEUMATIC GRIPPERS,
S/N 127504 (2003)
1 – A.W.T. 66” POWER BELT CONVEYOR, S/N 127504, With Accu
Cure Speed Control
1 – CUSTOM 4' X 6' VERTICAL 4-POST HEAT STAKE PRESS,
With Magelis PLC Control
SAATI MAJESTECH H41-1 FRAME
STRETCHER/STRATIGHTENER
VIEW OF ALUMINUM SILK EURO CHILLER EF-A-25/USA BUTLER AUTOMATIC 660LD4, 60”
SCREEN LAYOUT FRAMES CENTRALIZED CHILLER UNIT DUAL POSITION UNWIND STAND
CENTRALIZED VACUUM COLLECTION SYSTEM
1 – EUROVAC MODEL BLO-40E-06501530 CENTRALIZED VACUUM COLLECTION
SYSTEM, S/N 18818, 10-HP Vacuum Pump, Receiver Cyclone, With Bottom Discharge,
Pneumatic Pulse Jet Type Dust Collector, Wall Mounted Controls
SHEETERS
1 – ROSENTHAL/GAMMA MACHINE DESIGN 60” WIDE AUTO-SHEETER, S/N NA,
Asset #0064, 500-LB. Roll Capacity, Unwind Roll Arbor Stand, Motorized Feed Roll, With
Vari-Speed Control, 60” Long Multi-Strand Rubber Bank Belt Take-Away Conveyor, 54” x
54” Electric/Hydraulic Scissors Lift Stacking Table, Length & Batch Counter Controls
1 – BECK 60” WIDE AUTO-SHEETER MODEL NA, S/N 485, Outboard Take-Off Reel Stand,
With Pneumatic Drag Brake, Threading Rolls, Motorized Feed Roll, 60” Multi-Strand Cloth
Belt, Take-Off Conveyor, 60” x 80” 4-Post Motorized Chain Hoist Type Stacker Table, Servo
Roll Drives, Indramat Controls, With Contrex M-Rotary Program Screen, Programmable
Digital Length Control, Variable speed, Rotary Cut-Off Knife
SILK SCREEN EQUIPMENT
1 – SAATI MAJESTECH MODEL H41-1 FRAME STRETCHER/STRAIGHTENER,
S/N 41.6289 (1999), 7' W x 8'H Opening Size Pneumatic Controls
1 – SHOP BUILT FILM STRETCHER TABLE, 6' x 8' Maximum Sheet Size, Portable,
(31) Saati Top-Ten Pneumatic Stretcher Gripper Heads, Adjustable
1 – DOUTHITT MODEL DM1 SILK SCREEN LAYOUT/LIGHT TABLE, S/N 41909, Size 75” x
100”, TMR-60 Digital Timer
1 – DOUTHITT CORP. 50” X 75” LIGHT TABLE/LAYOUT TABLE, S/N 34844
165 – 69” x 90” ALUMINUM SILK SCREEN LAYOUT FRAMES
12 – 69” X 74” ALUMINUM SILK SCREEN LAYOUT FRAMES
19 – 69” X 80” ALUMINUM SILK SCREEN LAYOUT FRAMES
INVENTORY
Quantity of Polypropylene Film Rolls,
Inside Release Coating Rolls, EVA Crubba
Material, Some Flame Retardant
MISCELLANEOUS SUPPORT EQUIPMENT
1 – FANUC MODEL M-16i, 6-AXIS CNC ROBOT, S/N R98576761
(1998), Type A05B-1212-B202 M-16i Power Supply, Fanuc
System RJ2 Remote Control, With Hand Pendant
1 – FANUC MODEL M-16i, 6-AXIS CNC ROBOT, S/N R98576759
(1998), Type A05B-1212-B202 (Spare – No Control)
1 – EURO CHILLER MODEL EF-A-25/USA CENTRALIZED
CHILLER UNIT, S/N 091299871/727 (1999), Programmable
Controls
1 – KOOLANT KOOLERS MODEL KV5000 CENTRALIZED
CHILLER UNIT, S/N 22145, 5-HP Compressor, R-22 Refrigerant,
Water/Glycol Media
1 – BUTLER AUTOMATIC MODEL 660LD4, 60” DUAL POSITION
UNWIND STAND, S/N J004976-RH, 50” O.D. on 3” Cores,
Vertical Traversing Accumulator Rolls, Butler DataMat
Programmable Digital Controls
4 – VIDEO JET MODEL EXCEL 273se AUTO FLUSH INK JET
PRINTERS,
S/Ns
023540027WD,
011760108WDR,
023540026WD, 030620004WD, Programmable Controls
2 – NORDSON MODEL 5554 BULK MELTER APPLICATORS, S/N
AN01C00052, AN00J00027
2 – NORDSON MODEL FOAM MELT 190 ADHESIVE APPLICATORS,
S/Ns AN99A31158, AN99A31156
1 – NORDSON BM SERIES MODEL BM 200 BULK ADHESIVE SUPPLY SYSTEM, S/N LU03G04776 (2003), 55 Gallon Drum Size, 2Post Lift, Pneumatic Pump, Programmable Digital Controls
1 – UV LIGHT SOURCE TEST STAND
1 – HOT MELT TECHNOLOGIES PROFLEX HOT MELT GLUE
APPLICATOR, S/N NA, Genesys II ATD Temperature Control
1 – MOVIN-COOL MODEL CLASSIC PLUS 14 13,200 BTU
PORTABLE COOLING UNIT, S/N 0704-1815-140
2 – MOVIN-COOL MODEL CLASSIC PLUS 25, 24,000 BTU
PORTABLE COOLING UNITS, S/N 0799-0395-260, NA
1 – MOVIN-COOL MODEL 24HFU1, 24,000 BTU PORTABLE COOLING UNIT, S/N 1198-0142-24
Approximately (25) Fusion UV Bulb Variable Power Supplies
Approximately (15) UV Microwave Light Sources
To schedule an auction, please contact us at 248.254.9999
5
LAB EQUIPMENT • AIR COMPRESSORS & DRYERS • FORKLIFTS
2003
SQUARE D MAIN & SECONDARY
DISCONNECT PANELS
INGERSOLL RAND 20 & 25 HP ROTARY
SCREW AIR COMPRESSORS & DRYER
LANTECH Q-SERIES
Q300 PALLET SHRINK
WRAP MACHINE
MTS SYSTEMS QT/5 UNIVERSAL
TENSILE TEST MACHINE
2003
CHEM INSTRUMENTS AR-1000
ADHESION/RELEASE TESTER
LAB EQUIPMENT
VIEW OF TOYOTA MODELS 5FBC15 & 5FBE15 SIT-DOWN RIDER
ELECTRIC FORKLIFTS TO 2900-LB. CAPACITY
1 – MTS SYSTEMS MODEL QT/5 UNIVERSAL TENSILE TEST MACHINE,
S/N 195740/050498, With PC Controller
1 – BROOKFIELD MODEL DV-II + PROGRAMMABLE VISCOMETER
1 – CHEM INSTRUMENTS MODEL AR-1000 ADHESION/RELEASE
TESTER, S/N 004549, EX-LAB System Compatible
1 – ENVIRONMENTAL GROWTH CHAMBERS 8' W X 10' X 10' H
ENVIRONMENTAL TEST ROOM, S/N NA, Programmable Digital Controls,
Refrigeration/Heat, Honeywell Chart Recorder, Larkin 4-Fan Vaporizer, (2)
Vapor Proof Lights
1 – LUNAIRE MODEL CEO932W-3 ENVIRONMENTAL TEST CABINET,
S/N 26137-08, Free-Standing Chamber, ID Size 33” x 28” x 60” High,
Adjustable Shelves, Single Door, Digital Temperature & Humidity Controls
4 – FISCHER SCIENTIFIC ISOTEMP ELECTRIC LAB OVENS, S/Ns NA,
Digital Controls, 18” x 18” x 26” High, Adjustable Shelves
1 – FISCHER SCIENTIFIC MODEL 655F ISOTEMP ELECTRIC LAB OVEN,
S/N NA
1 – GCA PRECISION MODEL ECONOMY 18EM ELECTRIC LAB OVEN,
S/N NA
1 – SCIEN TEMP 64” X 22” X 28” DEEP CHEST FREEZER
2 – CUSTOM BUILT 40” X 26” ELECTRIC HEAT SEALING ASSEMBLY
PRESSES, Electric Heaters, Retractable Table
Inspection Lab Accessories Including: Layout Benches, Digital Bench Scales,
Reichart Stereo Microscope, Gurley Stiffness Tester, Elmendorf Tearing Tester,
Mitutoyo Digital Indicator, With Granite Base & Stand, Lab Sink
AIR COMPRESSORS & DRYERS
1 – INGERSOLL RAND MODEL SSR-UP6-30-125, 30-HP HORIZONTAL
TANK MOUNTED ROTARY SCREW AIR COMPRESSOR,
S/N PX1717003169 (2003), 125 CFM, 125 PSIG, Approximately 200
Gallon Tank
1 – INGERSOLL RAND MODEL SSR-UP6-30-125, 30-HP HORIZONTAL
TANK MOUNTED ROTARY SCREW AIR COMPRESSOR,
S/N PX1238U03055 (2003), 125 CFM, Approximately 100 Gallon Tank
1 – INGERSOLL RAND MODEL SSR-EP25SE 25-HP ROTARY SCREW AIR
COMPRESSOR, S/N KE5865U93098, 95 CFM, 125 PSIG, Sound
Enclosures, Intellisys Digital Controls
1 – INGERSOLL RAND MODEL SSR-EP20SE 20-HP ROTARY SCREW AIR
COMPRESSOR, S/N KE3378U96159, 77 CFM, 125 PSIG, Sound
Enclosures, Intellisys Digital Controls
1 – INGERSOLL RAND PREMIER SERIES MODEL 2000E20, 20/15-HP,
TWO-STAGE THREE CYLINDER HORIZONTAL TANK MOUNTED AIR
COMPRESSOR, S/N 0307250030 (2003), 72 CFM, 175 PSIG, 120 Gallon
Tank
1 – HANKISON MODEL PR100-115 REFRIGERATED COMPRESSED AIR
DRYER, S/N PR100A-1A-9804-153N, 100 SCFM Capacity @ 100 PSIG @
100 Degree Fahrenheit
1 – HANKISON MODEL HPRP100-115 REFRIGERATED COMPRESSED
AIR DRYER, S/N H100A1150212690, Capacity 100 CFM @ 100 PSIG @
100 Degree Fahrenheit
1 – INGERSOLL RAND MODEL THERMO STAR TS150 REFRIGERATED
COMPRESSED AIR DRYER, S/N DR10014391-051303 (2003), 175 PSI
Maximum
1 – INGERSOLL RAND MODEL DXR100 REFRIGERATED COMPRESSED
AIR DRYER, S/N 96FDXR2638
1 – VERTICAL AIR RECEIVER TANK, 32” Diameter x 76” High
FORD F150XL PICK UP TRUCK
ELECTRICAL DISTRIBUTION
1 – SQUARE D MAIN DISCONNECT PANEL, 2500 Amp, 480Y/277 Volts, 60 Hz, Enclosure Type 1
1 – SQUARE D SECONDARY DISCONNECT PANEL, 800 Amp, 480Y/277 Volt, 60 Hz, Enclosure Type 1, 15 Disconnect Switches,
Power Style Switchboard 1
1 – SQUARE D SECONDARY DISCONNECT PANEL, 800 Amp, 480Y/277 Volt, 60 Hz, Enclosure Type 1, 9 Disconnect Switches,
Power Style Switchboard 1
1 – SQUARE D SECONDARY DISCONNECT PANEL, 1200 Amp, 480Y/277 Volt, 60 Hz, Enclosure Type 1, 9 Disconnect Switches,
Power Style Switchboard 2, (1) Main
1 – SQUARE D SECONDARY DISCONNECT PANEL, 1200 Amp, 480Y/277 Volt, 60 Hz, Enclosure Type 1, 17 Disconnect Switches,
Power Style Switchboard 2, (1) Main
1 – APPROXIMATELY 22' ESTIMATED 600 AMP BUSS DUCT, With (4) Small Disconnects, (2) Large Disconnects
1 – APPROXIMATELY 450 LINEAR FEET CEILING SUSPENDED ALUMINUM WIRE CABLE RACEWAY TRAY, With 7-Strand
Copper Wire & Aluminum Cable Support Tray
(15) FORKLIFTS
1 – TOYOTA MODEL 5FBC15, 2900-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 11412, 4-Wheel Chassis,
169” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#1)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FLORKLIFT, S/N 10090, 4-Wheel Chassis,
185” Lift, 36-Volt, Side Shift, 42” Forks
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 35978, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#4)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 36007, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#3)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 38776, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#1)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 25438, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#5)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 24908, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#9)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 15584, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#Stockroom)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 38742, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (#2)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N N/A, 3-Wheel Chassis, 189” Lift,
3-Stage Mast, Side Shift, 36 Volt, 42” Forks
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 15229, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (Not in service, No Battery) (#6)
1 – TOYOTA MODEL 5FBE15, 2600-LB. CAPACITY SIT-DOWN RIDER ELECTRIC FORKLIFT, S/N 27751, 3-Wheel Chassis,
189” Lift, 3-Stage Mast, Side Shift, 36 Volt, 42” Forks (Not In Service – No Battery) (# Stockroom)
2 – CROWN MODEL RC3020-30, 2750-LB. CAPACITY STAND-UP RIDER ELECTRIC FORKLIFTS, S/N 1A233132, 1A216454,
190” Lift, Side Shift, 36 Volt, 48” Forks
1 – CLARK MODEL CTS15, 2850-LB. CAPACITY WALK-BEHIND ELECTRIC FORKLIFT, S/N CST15-0462-6847, 160” Lift, 24 Volt
1 – EXIDE MODEL G3-18-960B 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGER, MFG NO. OI35340
1 – EXIDE MODEL D3E-18-850, 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGER, S/N UA19866
1 – HOBART MODEL UR18-550, 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGER, S/N 77CS06093
1 – HOBART MODEL 540BI-18R 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGER, S/N 192CS02824
2 – GNB SCR CHARGER FLX MODEL SCRFLX-18-750TIZ INDUSTRIAL FORKLIFT BATTERY CHARGERS, S/Ns 02K0525S,
03E0379S, 36 VOLT
3 – HOBART BATTERY-MATE MODEL 600H3-18, 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGERS, S/Ns 196CS04451,
296CS09471, 196CS04835
2 – HOBART BATTERY-MATE MODEL 750H3-18C, 36 VOLT INDUSTRIAL FORKLIFT BATTERY CHARGERS, S/Ns 199CS46840,
498CS43423
PICK UP TRUCK
1 – 2003 FORD F150XL PICK UP TRUCK, VIN: 1FTRF17273NA69407, 2-Wheel Drive, Standard Cab, 4.2L V-6 Gas Engine, Automatic,
AC (40,834 Miles)
6 Visit www.thebranfordgroup.com to register and bid at this auction
CNC MACHINING CENTER • WAREHOUSE, SHOP, FACTORY & OFFICE
2003
MINUTEMAN MC388000 SIT-DOWN
RIDER TYPE BATTERY POWERED
FLOOR SWEEPER/SCRUBBER
2-STORY & SINGLE STORY
MODULAR OFFICE STRUCTURES
FADAL VMC4020 MODEL 906-1 CNC
VERTICAL MACHINING CENTER
FLOOR SCRUBBER
1 – MINUTEMAN MODEL MC388000 SIT-DOWN RIDER TYPE
BATTERY POWERED FLOOR SWEEPER/SCRUBBER,
S/N 13809093 (2003) (88.8 HRS)
WAREHOUSE & MATERIAL HANDLING
1 – LANTECH Q-SERIES MODEL Q300 SEMI-AUTOMATIC
PALLET SHRINK WRAP MACHINE, S/N QM015840, 65”
Diameter Table, 72” Vertical
2 – HIGHLIGHT INDUSTRIES MODEL SYNERGY 1.5 SEMIAUTOMATIC PALLET SHRINK WRAP MACHINES, S/N F300350-7294AG, C495-350-4674AD, 65” Diameter Table, 72” Vertical
1 – DETECTO MODEL FH-555-11E 5000-LB. CAPACITY X 60” X
60” ELECTRONIC PLATFORM SCALE, S/N B50675-1, With
Rite Lake Remote Programmable Readout
1 – WEIGH-TRONIX MODEL DS-10, 10,000-LB. CAPACITY X 48” X
60” ELECTRONIC PLATFORM SCALE, S/N 3342A, With Model
W1-110 Programmable Remote Readout
1 – WEIGH-TRONIX MODEL DS-10, 10,000-LB. CAPACITY X 48” X
60” ELECTRONIC PLATFORM SCALE, S/N 1189A, With Model
W1-102 Remote Digital Readout
1 – BEACON LINE 1/2-TON CAPACITY 360 DEGREE FREESTANDING JIB CRANE, S/N NA, 9' High x 9' Reach, With Budgit
1/2-Ton Electric Chain Hoist
43 – SECTIONS ADUSTABLE PALLET RACKING, 8' Wide x 4' Deep
x 16' High, Keystone Style, 3 & 4 Tier
33 – SECTIONS ADJUSTABLE PALLET RACKING, 8' Wide x 3'
Deep x 12' High
1 – STEEL TREE SERIES 25 SINGLE SIDE CANTILEVER STOCK
RACK, (4) Uprights, 9-1/2' Wide x 8' High, 24” Adjustable Arms –
4 Tier, Bolted Cross-Braces
5 – SINGLE SIDE CANTILEVER STOCK RACKS, Single Section,
(2) Uprights, 4' Wide x 12' High, 48” Adjustable Arms – 10 Tier
5 – SINGLE SIDE CANTILEVER STOCK RACKS, With Double Side
Capability, Single Section, (2) Uprights, 4' Wide x 12' High, 48”
Adjustable Arms – 10 Tier (Single Side Base)
34 – 64” X 48” X 19” HIGH COLLAPSABLE POLY SKID BOXES,
With 1/2 Drop Sides
500 – APPROXIMATE – 48” X 45” X 24” & 19” HIGH
COLLAPSIBLE POLY SKID BOXES
10 – WORK SAVER “TOTER” POLY TILT TRUCK PORTABLE
TRASH HOPPERS, (4) 2 cu. yd., (5) 1-1/2 cu. yd., (1) 1 cu. yd.
2 – SOUTHWORTH 51” X 69” ELECTRIC/HYDRAULIC SCISSORS
LIFT TABLES
2 – SOUTHWORTH 48” X 66” ELECTRIC/HYDRAULIC SCISSORS
LIFT TABLES
7 – 304 STAINLESS STEEL 180 GALLON CAPACITY FLUID
TRANSPORT TOTES, Stackable Base Mounted
OVER 100 – FABRICATED WOODEN 48” X 30” X 16” OPEN FILM
SHEET TRANSPORT CARTS, Open (1) Side
ARMSTRONG BLUM MARVEL
SERIES 8 MARK II TILT FRAME
UNIVERSAL VERTICAL BANDSAW
HP DESIGNJET 3000EP &
ROLAND CAMM-1 PRO PLOTTERS
STEEL TREE SERIES 25
SINGLE SIDE CANTILEVER
STOCK RACK
VIEW OF APPROXIMATELY 500
COLLAPSABLE POLY SKID BOXES
CNC VERTICAL MACHING CENTER
1 – FADAL VMC4020 MODEL 906-1 CNC VERTICAL MACHINING CENTER, S/N 9605711
(1996), Table Size 48” x 20”, Travels 40” X, 20” Y, 20” Z, Spindle Speeds to 10,000 RPM,
15-HP Spindle, CAT 40 Spindle Taper, 21-Position Automatic Tool Changer, Fadal CNC 88
HS Controls, Hydro Sweep Chip Removal System, Servo Coolant Nozzle Control,
Thru-Spindle Coolant, Renishaw MP12 Tool Setting Probe
ULTRASONIC WELDERS
1 – BRANSON MODEL 910BCA ULTRASONIC WELDER, S/N LA00085883, With Hand Held
Welding Gun
1 – BRANSON MODEL 910BC ULTRASONIC WELDER, S/N NH501420, With Hand Held
Welding Gun
MAINTENANCE SHOP & FACTORY EQUIPMENT
1 – HESCO MODEL H-800 HYDRAULIC TRASH COMPACTOR, S/N RD894958, Roll-Off Box
Style, (No Roll-Box), 10-HP Hydraulic Power Unit, With SP Industries Model ROLO-2000
Hydraulic Side Dumper, S/N 00066412
1 – 40' X 20' 2-STORY MODULAR OFFICE STRUCTURE, (2) Side Entrance Doors, 2nd Level
Exterior Access Stairway, Windows, (4) Window Type AC Units
1 – 40' X 20' X 10'H SINGLE-STORY MODULAR OFFICE STRUCTURE, (3) Access Doors,
Windows, (1) Wall Type A/C – Heating Unit, Drop Ceiling, Florescent Lights
3 – AIR HOSE REELS (Ceiling Mounted)
2 – DIAGRAPH 3/8” LETTER SIZE MECHANICAL STENCIL CUTTERS
3 – BETTER PACK MODEL 333 MECHANICAL TAPE SHOOTERS
1 – ARMSTRONG BLUM MARVEL SERIES 8 MARK II TILT FRAME UNIVERSAL VERTICAL
BANDSAW, S/N 827561 (1996), Manual Tilt & Clamp, Power Black Feed, Coolant
1 – ENCO MODEL 01712033, 6-1/2” X 10” HORIZONTAL METAL CUTTING BANDSAW,
S/N 2637, Portable
1 – DAYTON 3Z917E 15” FLOOR TYPE DRILL PRESS
1 – DAYTON 3Z917D 14” FLOOR TYPE DRILL PRESS
1 – ENCO MODEL 126-2240, 22” FLOOR TYPE DRILL PRESS, S/N 02996
1 – JET 8” DOUBLE-END BENCH GRINDER
1 – MILWAUKEE 14” ABRASIVE CUT-OFF SAW
1 – REDGID MODEL CM14500, 14” ABRASIVE CUT-OFF SAW
1 – H-FRAME HYDRAULIC SHOP PRESS, HYDRAULIC BOTTLE JACK
1 – OXYGEN/ACETYLENE TORCH SET
1 – MILWAUKEE ELECTROMAGNETIC DRILL PRESS
1 – ENCO 163-4700, 12” DISC/6” BELT COMBINATION SANDER/GRINDER, S/N 6030115
1 – ENCO MODEL 199-9090, 18” VERTICAL WOODCUTTING BANDSAW, S/N 80044
1 – CRAFTSMAN 16” THROAT SCROLL SAW
1 – RIDGID MODEL TS365, 10” TABLE SAW, S/N P063115134
1 – ENCO MODEL CT-205 BENCH TOP TOOL & CUTTER GRINDER, S/N 121-1700, 5” x 10”
Permanent Magnetic Chuck, Universal Head, 7” Wheel, Universal Fixture, Centers
1 – COLLINS MICRO FLAT 48” X 72” 4-LEDGE BLACK GRANITE SURFACE PLATE
1 – 48” X 72” 2-LEDGE PINK GRANITE SURFACE PLATE
Shop Fans, Maintenance Supplies, General Shop & Factory Supplies
1–
1–
1–
1–
1–
1–
1–
1–
1–
1–
OFFICES
HP DESIGN JET 500 PLOTTER
HP DESIGN JET 3000EP PLOTTER
ROLAND CAMM-1 PRO PLOTTER
HP DESIGN JET 600 PLOTTER
HP LASER JET 1020 PRINTER
HP DESK JET 3845 PRINTER
HP LASER JET 5P LASER PRINTER
LASER JET 2200DN PRINTER
LASER JET 4050T PRINTER
HP BUSINESS INKJET 3000
COPIER/PRINTER
1 – PELCO TLR2096 VCR, With Duplex
Color Multiplexer
19 – DELL PERSONAL COMPUTERS
1 – HP PERSONAL COMPUTER
1 – HP DESK JET 882C PRINTER
1 – SYLVANIA 30” SCREEN TV
1 – BROKSONIC 20” TV, With VCR & DVD
2 – PANASONIC KX-B630, 69” X 35”
ELECTRONIC WHITE BOARDS,
With Print
6 – KX-BJ30, 55” X 35” ELECTRONIC
WHITE BOARD, With Print
9 – FLAT SCREENS
1 – FIRE KING 36” 4-DRAWER LATERAL
FIREPROOF FILE CABINET
1 – BROTHER HL5250DN LASER
PRINTER
1 – CALCOMP MODEL 9100, 60” X 48”
SILK SCREEN LAYOUT TABLE,
Mayline Futur-Matic Motorized
7 – LAPTOPS
1 – PANAFAX UF885 FAX
1 – LASER JET 5000N
1 – HP BUSINESS INK JET 3000
COPIER/PRINTER
1 – LEXMARK 3 – 1 BUSINESS MACHINE
1 – PANASONIC 18” TV
1 – HP LASER JET 2600N PRINTER
12 – DELL SPC SHOP STATION
PERSONAL COMPUTERS, With Bar
Code Scanner
OVER 25 ZEBRA STRIPE BAR CODE
LABEL PRINTERS
MISCELLANEOUS OFFICE FURNITURE
To schedule an auction, please contact us at 248.254.9999
7
Atlanta • Birmingham • Boston • Charlotte • Chicago • Dallas • Detroit • Grand Rapids • Guadalajara (MX) • Hong Kong • Irapuato (MX) • Leeds (UK)
London (UK) • Los Angeles • Mexico City (MX) • Monterrey (MX) • New York • San Francisco • Southampton (UK) • Toronto • Villahermosa (MX)
Hilco Industrial, LLC
A u c t i o n e e r s
•
L i q u i d a t o r s
•
A p p r a i s e r s
Headquarters
31555 W. Fourteen Mile Road, Suite 207
Farmington Hills, MI 48334
Ph: 248.254.9999
Fx: 248.254.9995
www.hilcoind.com
Presorted
First Class Mail
U.S. Postage
PAID
Detroit, Mich.
Permit No. 100
Forwarding Service Requested
HILCAST TM
WEBCAST AUCTION
By order of the United States Bankruptcy Court, Northern District of Ohio, Akron Division,
Chapter 11, Case Number 08-51424-mss
STATE OF THE ART THERMOFORMING
AND DIE CUTTING FACILITY
Terms of Sale
A buyer’s premium of 13.5% for onsite sales & 16%
for webcast sales is in effect. Everything will be sold
to the highest bidder for cash, in accordance with
the Auctioneer’s customary “Terms of Sale”, copies
of which will be posted on the premises of the sale
and subject to additional terms announced the day
of sale. All items will be sold “as is, where-is” without any warranties, express or implied. Although
obtained from sources deemed reliable, the
Auctioneer makes no warranty or guarantee to the
accuracy of the information herein contained.
Bidders are encouraged to thoroughly inspect the
items on which they intend to bid prior to sale.
Absolutely no items will be removed until the day
after the conclusion of the sale and payment is made
in full. Subject to additions, deletions and prior sale.
Payment: ALL PURCHASES MUST BE PAID IN
FULL ON THE DAY OF THE AUCTION. If you intend
to pay by wire transfer, we will accept payment the
day after the sale ONLY IF a deposit of 25% of total
purchases is made on the day of the sale. Contact
our office for wire transfer instructions. Only cash,
wire transfer or certified check, payable to Hilco
Industrial, LLC will be accepted. Company checks
payable to Hilco Industrial LLC will be accepted only
if accompanied by a bank letter of guarantee, (see
sample letter below). All sales are subject to sales
tax. Purchasers claiming exemptions from taxes
must provide proof satisfactory to the Auctioneer of
their entitlement to claim such exemptions.
Tuesday, July 29th • Beginning at 10am Local Time
Macedonia, OH
HILCO Industrial, LLC is a division of Hilco Trading, Co. • Headquarters: 5 Revere Drive, Ste. 430 • Northbrook, IL 60062
All rights reserved • Printed in USA • EXCE3328 • IL License #444000215
Please visit our website at www.hilcoind.com to review our complete terms and conditions.
Sample Bank Letter
(Bank Name) unconditionally guarantees
payment to Hilco Industrial, LLC from (Company
Name). This guarantee will be valid for purchases
made at the Auction of Excello Engineered
Systems LLC on July 29, 2008.
Download PDF