AddPac | VoiceFinder AP2620 | Installation guide | AddPac VoiceFinder AP2620 Installation guide

PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620
VoIP Gateway
Installation Guide
Release 1.00
May, 2005
AddPac Technology, Co. Ltd.
2nd fl., Jeong-Am Building., 769-12 Yoksam-dong
Kangnam-ku Seoul, Korea 135-080
Phone (82 2)568-3848
Fax (82 2)568-3847
E-mail : info@addpac.com
http://www.addpac.com
AddPac Technology Proprietary & Documentation
47 - 1
PassFinder AP2620 VoIP Gateway , Release 1.00
[ Contents ]
Getting into the VoiceFinder AP2620 User’s Manual......................................................... 5
Chapter 1. VoiceFinder AP2620 Overview ........................................ 7
Introduction to the VoiceFinder AP2620............................................................................. 7
VoiceFinder AP2620 Gateway Overview........................................................................... 9
VoiceFinder AP2620 Gateway Hardware Specification................................................. 11
VoiceFinder AP2620 Gateway Support Protocol and Service ....................................... 12
VoiceFinder AP2620 Gateway Front Part ......................................................................... 14
VoiceFinder AP2620 Gateway Rear Part.......................................................................... 16
Voice Processing Interface ............................................................................................... 17
Audio Processing Interface ............................................................................................... 21
Chapter 2. Before VoiceFinder AP2620 Installation ........................ 26
Installation Requirements................................................................................................... 26
Electrical Requirements ..................................................................................................... 26
General Requirements ....................................................................................................... 28
Prerequisites for Network Connection .............................................................................. 29
Unpacking ........................................................................................................................... 31
Chapter 3. VoiceFinder AP2620 Installation .................................... 33
Async Serial Interface Connection................................................................................... 33
Ethernet Interface Connection.......................................................................................... 34
Voice Interface Connection.............................................................................................. 35
E1 Interface Connection .................................................................................................... 36
Connection for AP2620 Interfaces .................................................................................... 37
Chapter 4. Power Supply and Check Operational Status ............. 38
AP2620 Gateway Booting and Operation ....................................................................... 38
Use Console Terminal with HyperTerminal ....................................................................... 39
Chapter 5. Appendix ......................................................................... 45
Cable Specification............................................................................................................45
AddPac Technology Proprietary & Documentation
47 - 2
PassFinder AP2620 VoIP Gateway , Release 1.00
[ Figures ]
[ Figure 1-1Standard Network Diagram using AP2620 VoIP Gateway ]...........................7
[ Figure 1-2 The Exterior of VoiceFinder AP2620 VoIP Gateway ] ......................................8
[ Figure 1-3 VoiceFinder AP2620 Front View ] .....................................................................14
[ Figure 1-4 VoiceFinder AP2620 Rear View ] ......................................................................16
[ Figure 1-5 AP-FXS4 card for AP2620 ] .................................................................................18
[ Figure 1-6 AP-FXO4 card for AP2620 ]................................................................................18
[ Figure 1-7 AP-FXS2O2 for AP2620 ]......................................................................................19
[ Figure 1-8 AP-E&M4 card for AP2620 ]...............................................................................19
[ Figure 1-9 APV1-1E1 card for AP2620 ] ..............................................................................20
[ Figure 1-10 APV1-1T1 for AP2620 ] ......................................................................................20
[ Figure 1-11 AP-AUDIO2 card for AP2620 ] .........................................................................22
[ Figure 1-12 AP-AUD1S3 card for AP2620 ] .........................................................................22
[ Figure 1-13 AP-AUD1O3 card for AP2620 ]........................................................................23
[ Figure 1-14 AP-AUD1S2O1 card for AP2620 ]....................................................................23
[ Figure 1-15 AP-MP3 card for AP2620 ] ...............................................................................24
[ Figure 1-16 AP-HQA card for AP2620 ]...............................................................................24
[ Figure 1-17 AP-AV500 card for AP2620 ] ...........................................................................25
[ Figure 2-1 VoiceFinder AP2620 Package ]........................................................................31
[ Figure 3-1 Connection between AP2620 Console Port and Terminal PC ] .................33
[ Figure 3-2 Connection between AP2620 LAN0/LAN1 and WAN equipment/PC ]....34
[ Figure 3-3 Connection for VoiceFinder AP2620 Voice Interfaces ] ..............................35
[ Figure 3-4 Connection for VoiceFinder AP2620 E1 Interfaces ].....................................36
[ Figure 3-5 An Example of the Interface Connection ]....................................................37
[ Figure 4-1 MS-Windows Terminal Emulator - HyperTerminal ] ........................................39
[ Figure 4-2 Assign a name for the new connection in HyperTerminal ] ........................40
[ Figure 4-3 Select the interface for Console cable ] ........................................................41
[ Figure 4-4 COM1 Port Configuration ] ...............................................................................42
[ Figure 4-5 The initial message of VoiceFinder AP2620 Gateway ]................................44
[ Figure 5-1 100Base-TX RJ-45 Connector ] ..........................................................................46
[ Figure 5-2 Digital E1/T1 RJ45 Pinout ] ..................................................................................47
AddPac Technology Proprietary & Documentation
47 - 3
PassFinder AP2620 VoIP Gateway , Release 1.00
< Tables >
<Table 1-1> VoiceFinder AP2620 Hardware Specification...............................................11
<Table 1-2> VoiceFinder AP2620 Support Protocol and Service.....................................12
<Table 1-3> The below table describes the front panel LED of AP2620 VoIP Gateway.......14
<Table 1-4> VoiceFinder AP2620 Gateway Rear View Interface Description ..............16
<Table 5-1> The transferred signal and Pinout specification ...........................................45
<Table 5-2> Signal and Pinout of Direct Ethernet Cable ..................................................46
AddPac Technology Proprietary & Documentation
47 - 4
PassFinder AP2620 VoIP Gateway , Release 1.00
Getting into the VoiceFinder AP2620 User’s Manual
This chapter provides the overview of the VoiceFinder AP2620
Gateway user’s manual and an explanation of the symbols and
legends involved.
[Composition of the Manual ]
The VoiceFinder AP2620 installation guide serves to assist the installation of the
AP2620 Gateway. This manual is composed of 4 chapters as the following.
Thos experienced with Gateways may refer directly to the chapters as needed. But
those less experienced are highly recommended to thoroughly understand the
manual before operation of the Gateway.
z
Chapter 1 『 VoiceFinder AP2620 Overview』provides an introduction to
the hardware and software features of VoiceFinder AP2620 and technical
support request method.
z
Chapter 2 『Before Installation』provides the installation environment
and cable requirements, along with recommendations for safe
operation of the equipment.
z
Chapter 3『Installation』explains the basic installation information on
connecting the gateway with cables, how to use Console terminal and
etc.
z
Chapter 4『Appendix』includes the specification of the gateway, the
cable and etc.
AddPac Technology Proprietary & Documentation
47 - 5
PassFinder AP2620 VoIP Gateway , Release 1.00
For technical supports, please contact AddPac Technology Co. Ltd.
AddPac Technology Co., Ltd
2nd Fl. Jeong-Am Building, 769-12
Phone (02) 568-3848
Fax (02) 568-3847
E-mail : info@addpac.com
http://www.addpac.com
The revision history of VoiceFinder AP2620 Gateway Installation Guide is
as follows.
Revision No.
Date
Comments
Version 1.0
May 19, 2005
Initial Released
AddPac Technology Proprietary & Documentation
Written by
AddPac
R&D Center
47 - 6
PassFinder AP2620 VoIP Gateway , Release 1.00
Chapter 1. VoiceFinder
AP2620
Overview
Introduction to the VoiceFinder AP2620
VoiceFinder AP2620 VoIP Gateway is a next-generation VoIP
Gateway delivering maximum 8 analog voice channels and up to 2
E1, 2 T1 voice channels to enterprises and public offices in a
compact
form
factor.
This
new
model
realizes
extended
performance and higher adoptability by supporting various analog
voice and digital E1, T1 modules.
Figure 1-1 : The network diagram using VoiceFinder AP2620 Gateway.
[ Figure 1-1Standard Network Diagram using AP2620 VoIP Gateway ]
AddPac Technology Proprietary & Documentation
47 - 7
PassFinder AP2620 VoIP Gateway , Release 1.00
Most important part for VoIP telephony solution may be voice quality,
cost effective advantage and interoperability. AP2620 VoIP provides
the optimal solution to bring those features. It’s standard compliant
and market ready product, providing modular type architecture for
high availability, analog voice and broadcasting modules such as
FXS/FXO/E&M/MP3/Audio, unique advanced QoS algorithm, various
IP based network protocol, concurrent support for H.323/SIP/MGCP.
Besides, it ensures the seamless interoperability with major VoIP
gatekeepers, SIP proxy servers, MGCs and PBXs.
The exterior of AP2620 VoIP Gateway is provided in the following
figure.
[ Figure 1-2 The Exterior of VoiceFinder AP2620 VoIP Gateway ]
Optionally, Packet Filtering and Access List type Firewall is supported,
thus preventing intrusion using IP layer and TCP/UDP layer packet
source and destination address information.
The
DHCP(Dynamic
Host
Configuration
Protocol)
function
automatically assigns IP addresses to lower level network clients, and
uses NAT(Network Address Translation) to prevent IP address
depletion while hiding internal IP addresses which also adds to the
network security.
AddPac Technology Proprietary & Documentation
47 - 8
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 Gateway Overview
Your Choice of Cost Effective and Highly Adaptable System
With the rapid introduction of broadband WAN service, wide range
of traditional telephony service is now migrating to a converged
network. The customers are required to pay more close attention
while introducing VoIP Gateway which stands at the very front line
of IP network migration. The key is selecting cost effective and
feature-proved products with high adaptability. AP2620 facilitates
flexible and incremental service with it modular structure.
Small in Size, Big in Performance
AP2620 is a feature-rich VoIP Gateway supporting either maximum
8 channels of analog voice or 2 digital E1, T1 voice channels. That is,
customers are able to enjoy the small capacity VoIP service by
installing various analog VoIP modules at the initial stage and easily
meet the port augmentation demands by replacing to E1, T1
modules. Along with the QoS ensured VoIP telephony service,
AP2620 offers IP broadcasting terminal service by installing
broadcasting modules such as AP-AUDIO2. While saving investment,
experience various VoIP/ BoIP services with its modular expansion
options.
Supporting Two (2) 10/100Mbps Fast Ethernet Interface
AP2620 offers two (2) 10/100Mbps Fast Ethernet ports which ensure
optimized VoIP service at NAT/PAT, VRRP and Router environment.
AddPac Technology Proprietary & Documentation
47 - 9
PassFinder AP2620 VoIP Gateway , Release 1.00
Enhanced QoS and Superior Scalability Services
AddPac's VoIP Gateway series have been highly appraised at both
Koran and international markets and its lead in enterprise and
carrier market reveals the advanced performance and stability.
Moreover, AP2620 compares against competitive products in the
market with its ample scalability services and AddPac's know-how
which actively meet the communication needs of today's
customers. In terms of VoIP call signaling protocol, AP2620
concurrently supports H323, SIP and MGCP signaling protocols. Not
only general QoS algorithm, AP2620 supports the advanced QoS
algorithms to maintain state-of-art voice quality on any types of
conventional IP networks.
AddPac Technology Proprietary & Documentation
47 - 10
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 Gateway Hardware Specification
<Table 1-1> VoiceFinder AP2620 Hardware Specification
Microprocessor
PowerPC RISC Microprocessor
Memory
Network Interface
Module
Voice Interface
Module
Flash Memory
4Mbyte
SDRAM Memory
32Mbyte High-Speed SDRAM
Boot Memory
512Kbyte Flash Memory
Fixed LAN Port
Two(2) 10/100Mbps Fast Ethernet
Console Port
One(1) RS-232C Interface
Number of Slot
Two(2) Interface Slots
AP-FXS4
4-Port FXS Voice Interface Module (4 x RJ11)
AP-FXO4
4-Port FXO Voice Interface Module (4 x RJ11)
AP-E&M4
4-Port E&M Voice Interface Module (4 x RJ11)
AP-FXS2O2
2-FXO & 2-FXS Voice Interface Module (4 x RJ11)
APV1-1E1
1-Port PBX Digital E1 Module (1 x RJ45)
APV1-1T1
1-Port PBX Digital T1 Module (1 x RJ45)
AP-AUDIO2
Audio Module(4 x 3.5mm Female)
AP-AUD1S3
Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-AUD1S2O1
Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-AUD1O3
Audio/Voice Module(2 x 3.5mm Female/ 3 x RJ11)
AP-MP3
High Quality Audio Module(4 x 3.5mm Female)
AP-HQA
Video Interface
AP-AV500
Module
Power Requirement
High
Quality
VoIP
Audio
Broadcasting
Interface
Module(2 x 3.5mm Female/ PSB)
Video & Audio Encoder/Decoder Interface Module
(2 × 3.5mm Female/ 2×RCA/ PSB)
VAC 110~220V, 50/60Hz, 25Watt
Operating Temp
0°C to + 50°C (32° to 122°F)
Relative Humidity
5% to 95% (Non-condensing)
Dimensions(H x W x D) 44 x 444 x 220(mm) - 19" Rack Mountable Chassis
Weight(kg)
2.2Kg
AddPac Technology Proprietary & Documentation
47 - 11
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 Gateway Support Protocol and
Service
<Table 1-2> VoiceFinder AP2620 Support Protocol and Service
Routing Protocol
Static and IEEE 802.1Q VLAN Routing, RIP v1/v2, OSPF v2
WAN Protocol
Point-to-Point Protocol (PPPoE for ADSL), DHCP, Static IP
H.323, SIP, and MGCP Triple Stack Support
ISDN-PRI, R2, * DTMF Signaling Protocol Support
ITU-T H.323 v3 VoIP Protocol with ITU-T H.235 Security Feature
SIP protocol support compliant with IETF RFC3261(or RFC2543)
Voice over IP Services G.723.1, G726-16 K, G726-32K, G.729.A, G.711 Voice Compressions
Voice Processing Features Supports
- VAD, DRMF, CNG, G.168 and T.38 FAX Relay
ITU-T H.323 Gateway, Gatekeeper Support
Enhanced QoS Management Features for Voice Traffics
Standard SNMP Agent (MIB v2) Support
Network
Management
Traffic Queuing
Remote Management using Console, Rlogin, Telnet
Web based Managements using HTTP Server Interface
Standard & Extended IP Access List
Access Control and Data Protections
Enable/Disable for Specific Protocols
Security Functions
Multi-Level User Account Management
Auto-disconnect for Telnet/Console Sessions
PPP User Authentication Supports
→ Password Authentication Protocol(PAP)
→ Challenge Handshake Authentication Protocol (CHAP)
Operation &
Management
System Performance Analysis for Process, CPU
Configuration Backup & Restore for APOS Managements
Debugging, System Auditing, and Diagnostics Support
AddPac Technology Proprietary & Documentation
47 - 12
PassFinder AP2620 VoIP Gateway , Release 1.00
System Booting and Auto-rebooting with Watchdog Feature
System Managements with Data Logging
IP Traffic Statistics with Accounting
DHCP Server & Relay Functions
Network Address Translation (NAT) Function
Port Address Translation (PAT) Function
Other Scalability
Features
Transparent Bridging (IEEE Standard) Function
→ Spanning Tree Bridging Protocol Support
→ Remote Bridging Support
→ Concurrent Routing and Bridging Support
Easy Command Line Interface (CLI)
Network time Protocol(NTP) Support
AddPac Technology Proprietary & Documentation
47 - 13
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 Gateway Front Part
On the front panel of AP2620 VoIP Gateway, various LEDs are placed for
easy operation monitoring along with Max. two(2) channels of FXS, FXO,
and E&M Voice interfaces, 2 Ethernet, Console ports making possible
WAN-to-LAN VoIP service and IP routing service
[ Figure 1-3 VoiceFinder AP2620 Front View ]
<Table 1-3> The below table describes the front panel LED of AP2620 VoIP
Gateway
No.
Part
①
RST
②
PWR
③
RUN
④
LAN0 Link
⑤
LAN0 10M ACT
⑥
⑦
⑧
LAN0 100M
ACT
LAN1 Link
Description
RESET
switch
:
Resets
the
system
by
hardware (Red)
Power LED : Indicates power supply (Green)
RUN LED : Indicates proper functioning of
the equipment (ACT Green)
LINK LED : Indicates proper connection of
LAN0 (Yellow)
LAN0 10M LED : Indicates Ethernet port
data input status(ACT Green)
LAN0 100M LED : Indicates Ethernet port
data input status(ACT Green)
LINK1 LED : Indicates proper connection of
LAN0(Yellow)
LAN1 10M ACT LAN1 10M LED : Indicates Ethernet port
AddPac Technology Proprietary & Documentation
47 - 14
PassFinder AP2620 VoIP Gateway , Release 1.00
data input status(ACT Green)
⑨
LAN1 100M
ACT
LAN1 100M LED : Indicates Ethernet port
data input status(ACT Green)
AddPac Technology Proprietary & Documentation
47 - 15
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 Gateway Rear Part
AP2620 VoIP Gateway’s rear view adapts external architecture for
user friendly cable and power switch working.
[ Figure 1-4 VoiceFinder AP2620 Rear View ]
<Table 1-4> VoiceFinder AP2620 Gateway Rear View Interface Description
No.
Label
Description
With the provided console cable, connect
①
CONSOLE
with the PC for equipment configuration.
Mandatory for initial setting.
②
LAN0
RJ45/LAN0 Ethernet Interface.
③
LAN1
RJ45/LAN1 Ethernet Interface.
④
ACT 0/1/2/3
Indicates Voice Port status (ACT Green)
⑤
PHONE
RJ11/FXS Interface.
⑥
AC 110~220V
⑦
SW
Connects power cable. The AP2620 VoIP
Gateway uses both 110 and 220V AC .
Switch for power supply.
AddPac Technology Proprietary & Documentation
47 - 16
PassFinder AP2620 VoIP Gateway , Release 1.00
Voice Processing Interface
The multi-service network modules of AP2620 VoIP Gateway are optional
and can be selected according to users’ network.
Multi-service network
modules for high quality multimedia solution can be divided as follows.
z
FXS interface voice module
z
FXO interface voice module
z
FXS2O2 interface voice module
z
E&M interface voice module
z
Digital E1/T1 interface voice module
AddPac Technology Proprietary & Documentation
47 - 17
PassFinder AP2620 VoIP Gateway , Release 1.00
4-Port FXS Voice Interface Module
AP2620 VoIP Gateway offers 4 channel Foreign Exchange Station (FXS)
to connect ordinary telephones and PBX directly.
[ Figure 1-5 AP-FXS4 card for AP2620 ]
4-Port FXO Voice Interface Module
AP2620 VoIP Gateway offers 4 channel Foreign Exchange Office (FXO)
to connect the switching office of Public Switched Telephone Network
(PSTN) or ordinary telephones.
[ Figure 1-6 AP-FXO4 card for AP2620 ]
4-Port-FXO2S2 : 2-Port FXO and 2-Port FXS Voice Interface Module
AddPac Technology Proprietary & Documentation
47 - 18
PassFinder AP2620 VoIP Gateway , Release 1.00
4-port-FXO2S2 offers various voice service with 2- channel FXS voice
interface and 2- channel FXO interface in one module.
[ Figure 1-7 AP-FXS2O2 for AP2620 ]
4-Port E&M Voice Interface Module
AP2620 VoIP Gateway supports 4 channel voice service module of
recEieve and transMit (E&M).
This analog E&M Interface is used to
connect Trunk line of PBX.
[ Figure 1-8 AP-E&M4 card for AP2620 ]
Digital E1 Voice Interface Module
VoiceFinder AP2620 VoIP Gateway support digital E1 voice
processing module for PBX interworking. Digital E1 Interface module
supports ISDN-PRI, MFC-R2, DTMF and accommodate maximum 30
AddPac Technology Proprietary & Documentation
47 - 19
PassFinder AP2620 VoIP Gateway , Release 1.00
voice channels.
[ Figure 1-9 APV1-1E1 card for AP2620 ]
Digital T1 Voice Interface Module
VoiceFinder AP2620 VoIP Gateway supports digital T1 voice
processing module for PBX interworking. Digital T1 Interface module
supports ISDN-PRI, MFC-R2, DTMF and accommodate maximum 23
voice channels.
[ Figure 1-10 APV1-1T1 for AP2620 ]
AddPac Technology Proprietary & Documentation
47 - 20
PassFinder AP2620 VoIP Gateway , Release 1.00
Audio Processing Interface
Audio processing interfaces for VoIP Broadcasting System solution can
be divided as follows
z
Audio interface voice processing module
z
Audio interface, FXS interface voice processing module
z
Audio interface, FXO interface voice processing module
z
Audio interface, FXS interface, FXO interface voice processing
module
z
MP3 interface voice processing module
z
HQA Audio Module
z
Audio&Video Encoder/Decoder Module
AddPac Technology Proprietary & Documentation
47 - 21
PassFinder AP2620 VoIP Gateway , Release 1.00
2-Channel Audio Broadcasting Module
VoiceFinder AP2620 VoIP Gateway supports standard Audio
processing module. AP-Audio2 standard broadcasting module
supports 2-channel Audio In/Out using high performance DSP for
VoIP broadcasting service.
[ Figure 1-11 AP-AUDIO2 card for AP2620 ]
1-Channel Audio, 3-Port FXS Module
VoiceFinder AP2620 VoIP Gateway supports high performance
audio/voice integrated module. AP-AUD1S3 broadcasting module
supports 1-channel Audio In/Out and 3-FXS ports for VoIP
broadcasting service and VoIP call.
[ Figure 1-12 AP-AUD1S3 card for AP2620 ]
AddPac Technology Proprietary & Documentation
47 - 22
PassFinder AP2620 VoIP Gateway , Release 1.00
1-Channel Audio, 3-Port FXO Module
VoiceFinder AP2620 VoIP Gateway supports high performance
audio/voice integrated module. AP-AUD1S3 broadcasting module
supports 1-channel Audio In/Out and 3-FXO ports for VoIP
broadcasting service and VoIP call.
[ Figure 1-13 AP-AUD1O3 card for AP2620 ]
1-Channel Audio, 2-Port FXS, 1-Port FXO Module
VoiceFinder AP2620 VoIP Gateway supports high performance
audio/voice integrated module. AP-AUD1S3 broadcasting module
supports 1-channel Audio In/Out, 2-FXS ports, 1-FXO port for VoIP
broadcasting service and VoIP call.
[ Figure 1-14 AP-AUD1S2O1 card for AP2620 ]
1-Channel MP3 Audio Module
AddPac Technology Proprietary & Documentation
47 - 23
PassFinder AP2620 VoIP Gateway , Release 1.00
VoiceFinder AP2620 VoIP Gateway supports high performance MP3
broadcasting module for high quality music broadcasting service.
AP-MP3 broadcasting module features 1-channel MP3 In/Out for
high quality VoIP broadcasting service. User can use MIC and Linein as Input channels and Headphone and Line-out as output
channels.
[ Figure 1-15 AP-MP3 card for AP2620 ]
1-Channel HQA Audio Module
VoiceFinder AP2620 VoIP Gateway supports high performance
HQA broadcasting module for providing high quality music
broadcasting service. AP-HQA broadcasting module offers high
quality VoIP broadcasting service using 1-channel Audio In/Out.
User can use MIC and Line-in as Input channels and Headphone
and Line-out as output channels. Built-in PSB relay port also enables
remote On/Off power switching of Audio Amp.
[ Figure 1-16 AP-HQA card for AP2620 ]
AddPac Technology Proprietary & Documentation
47 - 24
PassFinder AP2620 VoIP Gateway , Release 1.00
1-Channel Audio&Video Encoder/Decoder Module
VoiceFinder AP2620 VoIP Gateway supports high performance
video & audio encoding/decoding interface module. AP-AV500
broadcasting module provides high quality AV broadcasting
service using 1-channel Audio, Video In/Out. User can use
MIC/Line-in as audio input channels, DVD/TV/Camera as video
input channels. Line-out/Headphone as video input channels, and
TV/Monitor as video output channels. Built-in PSB relay port also
enables remote On/Off power switching of Audio Amp.
[ Figure 1-17 AP-AV500 card for AP2620 ]
AddPac Technology Proprietary & Documentation
47 - 25
PassFinder AP2620 VoIP Gateway , Release 1.00
Chapter 2. Before VoiceFinder AP2620
Installation
Installation Requirements
The following is the recommendation for safe operation of the
equipment.
z Ensure the AP2620 VoIP Gateway is in a dust-free environment
before and after
installation.
z Ensure the AP2620 cover is opened on a flat and safe surface.
z To prevent accidents, avoid ties, scarf, sleeves, and any other
loose clothing from entangling with the Chassis.
z Avoid any actions that may effect the equipment or the operator.
Electrical Requirements
There are two main sources of electrical problems with the AP2620 :
the power supply and static electricity.
This section describes safety recommendations for each case.
z
Electrical Safety
9
In case of the occurrence of an electrical accident, operate
at a position where immediate shut-off of power supply is
possible.
9
Switch the power off when installing or taking the cover off
the equipment.
AddPac Technology Proprietary & Documentation
47 - 26
PassFinder AP2620 VoIP Gateway , Release 1.00
9
Avoid operating the equipment alone at a potentially
dangerous environment.
9
Do not assume the power is switched off, but always confirm
the power status.
9
Be
extremely
cautious
when
operating
in
a
humid
environment or with an uncovered power extension cable.
AddPac Technology Proprietary & Documentation
47 - 27
PassFinder AP2620 VoIP Gateway , Release 1.00
z
Prevention of Static Electricity
9
The main chip-set of the Gateway are very delicate and
misuse may result in static electrical damage.
9
If a static prevention waist strap is available, strap it around
the wrist and earth the cord before operating the equipment.
9
If no waist tap is available, earthing by holding a metal part of
the Chassis will help prevent static electricity.
General Requirements
The VoiceFinder AP2620 is ready for use where electronic products
are used. However, a location with the following conditions are
recommended for maximum performance.
z
A level and well ventilated location is recommended.
z
Secure the equipment safely where intended to install.
z
Avoid placing objects on top of the equipment.
z
Install the equipment in a cool location avoiding direct sunlight.
z
Maintain distance from flammable, chemical, or magnetic
objects.
AddPac Technology Proprietary & Documentation
47 - 28
PassFinder AP2620 VoIP Gateway , Release 1.00
Prerequisites for Network Connection
Observe EIA standards and distance limitations when installing the
Gateway
The following section describes the synchronous serial cable,
Ethernet Cable and the Console Cable VoiceFinder AP2620
supports.
Preparation for Installation
Unless ordered in advance, the tools and certain cables are not provided in
the package. Prepare the following equipments and tools before the
installation.
z
Standard screwdriver set
z
Cable for LAN and serial port
9
RJ-45 to RJ-45 cable for LAN port
9
RS-232c console cable with RJ-45 connector (included in the
package)
z
Cable for Phone port
9
z
Telephone line with RJ-11 connector
PC with Console Terminal or Communication Emulator application (The
Hyper Terminal Program in Windows will suffice.
Configure it as :
9,600 Baud, No Parity, 8Bit Data 1Stop Bit)
AddPac Technology Proprietary & Documentation
47 - 29
PassFinder AP2620 VoIP Gateway , Release 1.00
Ethernet Port
AP2620 VoIP Gateway has two(2) RJ45 type Ethernet Ports and LEDs
of the ports on the front panel. Make sure to use specified cable
and connectors to use the ports.
RS-232C Serial Console Port
AP2620 VoIP Gateway has RJ-45 type RS-232C Female DCE
connector interface on the front panel.
This port is used for Initial
Configuration, monitoring and debugging of the Gateway. Make
sure to use specified cable and connectors to use the port.
AddPac Technology Proprietary & Documentation
47 - 30
PassFinder AP2620 VoIP Gateway , Release 1.00
Unpacking
Before unpacking, check for external damage of the packaging
box .
If an external damage of the packaging has been found, please
contact
AddPac
Technology
Co.
Ltd.
sales
department
(sales@addpac.com, tel : +82-2-568-3848) for an immediate
exchange of product.
If no external damage has found, confirm if the following items are
enclosed.
No.
1
2
3
4
Item
Contents
Q’ty
VoiceFinder AP2620
1
Gateway Main Body
LAN Cable
1
(For RJ45 to RJ45)
Console Port Cable
1
(For RJ45 to DB9)
AC Power Cable
1
(220V)
[ Figure 2-1 VoiceFinder AP2620 Package ]
AddPac Technology Proprietary & Documentation
47 - 31
PassFinder AP2620 VoIP Gateway , Release 1.00
AddPac Technology Proprietary & Documentation
47 - 32
PassFinder AP2620 VoIP Gateway , Release 1.00
Chapter 3. VoiceFinder
AP2620
Installation
Async Serial Interface Connection
z
Connect the console port in the rear side of the Gateway with the serial
port of the prepared console terminal. (Refer to [Figure 3.1]) Use the
console cable provided with the package. If using a PC as the console
terminal, connect to the Ethernet port of the PC.
[ Figure 3-1 Connection between AP2620 Console Port and Terminal PC ]
AddPac Technology Proprietary & Documentation
47 - 33
PassFinder AP2620 VoIP Gateway , Release 1.00
Ethernet Interface Connection
z
Connect the network to the desired port using RJ-45
connector. Below figure shows a network config with LAN0
for WAN, LAN1 for PC.
Failure : WAN Cable is connected to console
[ Figure 3-2 Connection between AP2620 LAN0/LAN1 and WAN
equipment/PC ]
AddPac Technology Proprietary & Documentation
47 - 34
PassFinder AP2620 VoIP Gateway , Release 1.00
Voice Interface Connection
FXS/FXO port can be connected to proper equipment using RJ-11
connector. Usually FXS is connected to subscribers’ handset and
FXO is connected to PBX extension. Because E&M port has a
different PIN array, please check the cable specification at 4th
chapter Appendix.
[ Figure 3-3 Connection for VoiceFinder AP2620 Voice Interfaces ]
AddPac Technology Proprietary & Documentation
47 - 35
PassFinder AP2620 VoIP Gateway , Release 1.00
E1 Interface Connection
Usually E1 VoIP module interworks with PBX through digital E1 line.
APVI-1E1 VoIP Digital E1 Interface module supports ISDN-PRI, MFCR2, DTMF signaling and accommodate maximum 30 voice
channels.
[ Figure 3-4 Connection for VoiceFinder AP2620 E1 Interfaces ]
AddPac Technology Proprietary & Documentation
47 - 36
PassFinder AP2620 VoIP Gateway , Release 1.00
Connection for AP2620 Interfaces
The below figure is an example of VoiceFinder AP2620 Gateway
Interface connection.
[ Figure 3-5 An Example of the Interface Connection ]
AddPac Technology Proprietary & Documentation
47 - 37
PassFinder AP2620 VoIP Gateway , Release 1.00
Chapter 4. Power Supply and Check
Operational Status
AP2620 Gateway Booting and Operation
When power is supplied, the system is booted as described below.
z
VoiceFinder AP2620 Gateway performs a self-test and checks basic
operations of the CPU, the memory and interfaces.
z
The boot loader is executed, and the boot loader seeks for proper
software image files. The boot loader loads the broadcasting system
software from the flash memory.
z
If the boot loader cannot find proper software image file from the flash
memory, the boot loader stands by in the boot mode until it receives
proper software from the remote system.
(At this time, the boot
loader can download software through TFTP or FTP protocol.)
z
When the software is loaded, the broadcasting system starts to operate
according to configuration information.
However, if there is no
configuration information, it operates according to the default values,
and in this case, the operator shall set up related items for normal
operation of the network.
After connecting all the interfaces, supply the power to VoiceFinder AP2620
Gateway. Supply the power after connecting the adapter to VoiceFinder
AP2620 Gateway.
Do not connect the adapter to the power supply before
connecting it to the gateway.
supply is 110V.
Also, use 110V adapter in case the power
However, the gateway detects both 110V and 220V, so
there is no additional setting required.
AddPac Technology Proprietary & Documentation
47 - 38
PassFinder AP2620 VoIP Gateway , Release 1.00
Use Console Terminal with HyperTerminal
z To use a PC as a Console terminal, the communication emulator
application should be installed.
When the PC is MS-Windows line, use
the HyperTerminal Application.
[ Figure 4-1 MS-Windows Terminal Emulator - HyperTerminal ]
AddPac Technology Proprietary & Documentation
47 - 39
PassFinder AP2620 VoIP Gateway , Release 1.00
z
Assign a name to the connection.
“AddPac” is used at the
below example.
[ Figure 4-2 Assign a name for the new connection in HyperTerminal ]
AddPac Technology Proprietary & Documentation
47 - 40
PassFinder AP2620 VoIP Gateway , Release 1.00
Select the interface whether the Console cable is connected.
Typically, the Console cable is connected to the RS-232C 9Pin
Serial Port, so select the right port according to the user
environment. “COM1” is selected at the below example.
[ Figure 4-3 Select the interface for Console cable ]
AddPac Technology Proprietary & Documentation
47 - 41
PassFinder AP2620 VoIP Gateway , Release 1.00
z Set the port information.
The below examples is based on “COM1” port.
[ Figure 4-4 COM1 Port Configuration ]
AddPac Technology Proprietary & Documentation
47 - 42
PassFinder AP2620 VoIP Gateway , Release 1.00
z After the configuration, press “Enter” button, then the below
message will be displayed on the HyperTerminal. This message
shows the routing S/W version, Gateway H/W test result, memory
and etc.
System Boot Loader, Version 2.2.4/WD [264MHz]
Copyright (c) by AddPac Technology Co., Ltd. Since 1999.
System Bootstrap, Version 1.2
Decompressing the image:
###########################################################
###########################################################
###########################################################
########################################################[OK]
VoiceFinder Gateway Series (AP2620)
Serial Number: AP2620-XXXXXX
32BIT RISC Processor With 264MHz Clock
32 Mbytes System Memory
512 Kbytes System Boot Flash Memory
4 Mbytes System Flash Memory
Real-Time Clock Device with EEPROM
1 RS232 Serial Console Interface
2 Ethernet/IEEE 802.3 Interface (100BaseTX)
AP2620 System software Revision 8.21
Released at Thu May 12 18:00:00 2005
Program is 2574712 bytes, checksum is 0x14803011
Local Time : Fri May 20 12:31:20 2005
Copyright (c) by AddPac Technology Co., Ltd. Since 1999.
Hardware Revision ID = 0
Slot (0) Module type : FSS
Slot (1) Module type : OS3
AddPac Technology Proprietary & Documentation
47 - 43
PassFinder AP2620 VoIP Gateway , Release 1.00
The system is not configured yet or backup data is invalid.
Please login to system as a "root" and make configuration.
Flash ROM size is too small for IVR system
Voice Module Ready
DSP S/W download (0): .... OK
DSP S/W download (1): .... OK
The System is ready. Please login to system.
VoipGateway::Init1
- No IP address on the VoIP Interface
PS(0) install .... OK
PS(1) install .... OK
login:
login: root
password:
AP2620
- Login : root at Console on Fri May 20 12:31:40 2005
AP2620#
[ Figure 4-5 The initial message of VoiceFinder AP2620 Gateway ]
z With the log-in message, input the user name “root” and the password
“router”.
After the log-in process, the prompt “AP2620#” is displayed on
the console terminal.
AddPac Technology Proprietary & Documentation
47 - 44
PassFinder AP2620 VoIP Gateway , Release 1.00
Chapter 5. Appendix
Cable Specification
This Appendix provides information about the Pinout specifications of the
following cables used with VoiceFinder AP2620 Gateway.
z
Console Port Signal and Pinout (RJ-45 to DB9)
z
Ethernet Cable Assemble (RJ-45 to RJ-45) Pinout
[ Console Port Signal & Pinout ]
In order to connect the gateway console port with the Terminal Emulating
PC, the RJ-45 to DB9 (Female DTE Connector) cable is used. The
transferred signal and Pinout specifications are enlisted in the following
table.
<Table 5-1> The transferred signal and Pinout specification
Gateway
Console
Console Device
RJ-45
DB-9
Signal
RJ-45 Pin
DB-9 Pin
Signal
RTS
1
8
CTS
DTR
2
6
DSR
TxD
3
2
RxD
GND
4
5
GND
GND
5
5
GND
RxD
6
3
TxD
DSR
7
4
DTR
CTS
8
7
RTS
(DTE)
AddPac Technology Proprietary & Documentation
(PC)
47 - 45
PassFinder AP2620 VoIP Gateway , Release 1.00
[UTP cable (RJ-45 to RJ-45) Pinout]
In order to connect the gateway with other equipments (i.e. HUB), the RJ45 to RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence
is provided below and the transferred signal and Pinout specifications are
enlisted at the below table.
[ Figure 5-1 100Base-TX RJ-45 Connector ]
<Table 5-2> Signal and Pinout of Direct Ethernet Cable
RJ-45
Signal
Direction
RJ-45 Pin
1
Tx +
→
1
2
Tx -
→
2
3
Rx +
←
3
4
-
-
4
5
-
-
5
6
Rx -
←
6
7
-
-
7
8
-
-
8
1. These specifications are for serial cables connecting the gateway and
the HUB.
2. For gateway to gateway or gateway to PC connection, the Cross Cable
must be used.
AddPac Technology Proprietary & Documentation
47 - 46
PassFinder AP2620 VoIP Gateway , Release 1.00
[E1/T1 Cable (RJ-45 to PBX) Pinout]
y
Addpac E1/T1 can be connected with RJ45 cable. RJ45 pin array is as below,
PBX’s RX is assigned for RJ45 pin 1 and 2, TX is for pin 4 and 5.
TX_RING(pin 5)
TX_TIP(pin 4)
RX_RING(pin 2)
RX_TIP(pin 1)
[ Figure 5-2 Digital E1/T1 RJ45 Pinout ]
AddPac Technology Proprietary & Documentation
47 - 47
Download PDF