RB 1070
High Current Two Channel Amplifier
Description
The latest interpretation of a classic Rotel awardwinning power amplifier, the RB-1070 continues the tradition of oversized toroidal transformer and high capacity power supply. In addition, Symmetrical Signal Trace circuit topology assures the precise interchannel timing clues necessary for pinpoint stereo reproduction. At 130 watts per channel, the RB-1070 is more than capable of meeting the challenges of even the least efficient loudspeakers. An internal bridge option provides truly prodigious
330 watt output capability. Front panel LED status indicators show power, protection, and bridged mode for instant system analysis. A separate input and output for 12 volt “trigger” signals and detachable AC cord increase this amplifier’s flexibility by allowing total integration with even the most complex remote-controlled systems.
Specifications
Power Configurations: 2 x 130 watts
Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
130 watts
(bridged mono)
0.03%, maximum
0.03%, maximum
0.03%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum
Damping Factor (8 ohms): 500
Input Sens. / Impedance:
Frequency Response:
S/N Ratio (IHF A):
Power Consumption:
Dimensions (W x H x D):
Front Panel Height:
Weight (net):
1.0V / 33 kohms
4-100kHz (=0.5dB, -3dB)
120dB
400 watts
433 x 121 x 334mm
17 1 /
8
x 4 3 /
4
x 13 1 /
8
"
109 mm, 4.3”
10.2 kg / 22.4 lbs
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T +1 978 664 3820
F +1 978 664 4109 www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T +44 (0) 1903 221 763
F +44 (0) 1903 221 525
