Wincomm WEB-6681 Series Installation manual

Wincomm WEB-6681 Series Installation manual
OSD (On-Screen Display)
for Covert PIR Camera
Manual
EV-6680 Series
Motion-activated LED
programmable from the
OSD menu, simulating a
real PIR sensor.
EV-6681 Series
Invisible 940nm IR
LEDs provide infrared
light for the camera but
are invisible to the
human eye.
For the following cameras:
Model
Format
EV-6680-N3WQ
EV-6680-P3WQ
EV-6681-N3WQ
EV-6681-P3WQ
NTSC
PAL
NTSC
PAL
Programmable
Motion-Activated LED
Yes
Yes
No
No
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
Covert
IR LEDs
No
No
Yes
Yes
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Table of Contents:
Programmable Features ................................... 2
How to Use the OSD Controller........................ 3
Main Setup Menu ............................................. 3
Menu Diagram 1 ............................................... 4
Menu Diagram 2 ............................................... 5
Lens .................................................................. 5
Shutter / Automatic Gain Control (AGC)........... 6
White Balance .................................................. 7
Backlight Compensation (BLC) ........................ 8
Digital Wide Dynamic Range (D-WDR) ........... 9
Motion Detection ............................................. 9
Day / Night Mode........................................... 10
2D Noise Reduction (NR) .............................. 11
Camera ID ..................................................... 11
Sync .............................................................. 11
Language ...................................................... 12
Camera Reset ............................................... 12
Troubleshooting............................................. 12
Programmable Features:
HLC OFF
D-WDR OFF
2D-NR OFF
HLC ON
D-WDR ON
2D-NR ON
• Lens
Choose between DC Auto Iris and Manual
Lens Adjustment
• Shutter
Manually adjust the shutter speed
• White Balance
Adjust the color temperature and image
color of the picture
• Backlight Compensation (BLC)
Adjust the exposure to properly display the
subject in front of a bright light source
• Highlight Compensation (HLC)
Define target areas and remove spotlights
to make certain objects visible
• Picture Adjustment
Adjust the camera’s brightness, contrast,
sharpness, hue, and gain
2
• Digital Wide Dynamic Range (D-WDR)
Adjust the brightness values of the image for
a more detailed picture
• Motion Detection
Detect if there is motion in the scene
• Day/Night Mode
Adjust the level where the camera will
switch from color to B/W when the ambient
light is low
• 2D Noise Reduction (NR)
Adjust for less interference on the screen in
an area with low illumination
• Camera ID
Set a name for the camera to display on
screen
• Language
Set the OSD language
SECO-LARM U.S.A., Inc.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Please read the camera installation manual for safety precautions and detailed instructions on
how to install the camera.
How to Use the OSD Controller:
1. Press down on the joystick to open the OSD menu.
2. Use the joystick to navigate the OSD menu.
3. To select an item, press down on the joystick.
OSD
Controller
Main Setup Menu:
Menu items can be selected by using the joystick.
1.
2.
3.
4.
Press down on the joystick.
The Main Setup Menu will be displayed on the monitor.
Move to and select the required function by moving the joystick up and down.
Change the menu setting by moving the joystick left and right.
After choosing the setting, move the cursor to EXIT and press down on the joystick.
Menu Diagram 1
Menu Diagram 2
Note:
• Select available options by moving the cursor to the desired feature.
• A submenu is available where the option reads .
• SYNC SETUP cannot be altered. SYNC SETUP is set to internal synchronization mode.
SECO-LARM U.S.A., Inc.
3
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Menu Diagram 1:
SETUP MENU
SETTING
1)
AUTO
LENS
(see page 5)
MANUAL
AUTO
2)
SHUTTER / AGC
(see page 6)
MANUAL
ATW
3)
WHITE BAL
(see page 7)
PUSH
USER1
USER2
ANTI CR
MANUAL
PUSH LOCK
OFF
BLC
HLC
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
4)
BACKLIGHT
(see page 8)
5)
PICT ADJUST
(see page 8)
6)
D-WDR
(see page 9)
ON
MOTION DET
(see page 9)
ON
7)
OFF
OFF
SETTING OPTIONS
TYPE: DC / VIDEO
MODE: AUTO / OPEN / CLOSE
SPEED: 0~255 Adjustable range
Set for fixed lens camera
High Luminance: MODE1: SHUT + AUTO IRIS / AUTO IRIS / SHUT
BRIGHTNESS: 0~255 Adjustable range
Low Luminance: MODE: AGC / OFF
BRIGHTNESS: x0.25, x0.50, x0.75, x1.00
MODE:
SHUT + AGC
SHUTTER:
1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10,000
AGC:
6.00, 12.00, 18.00, 24.00, 30.00, 36.00, 42.00, 44.80
SPEED:
0~255 Adjustable range
DELAY CNT:
0~255 Adjustable range
ATW FRAME:
x.050, x1.00, x1.50, x2.00
ENVIRONMENT: INDOOR / OUTDOOR
Disable white balance mode
B-Gain: 0~255 Adjustable range
R-Gain: 0~255 Adjustable range
B-Gain: 0~255 Adjustable range
R-Gain: 0~255 Adjustable range
Enable anti-color rolling
LEVEL: 26~72 Adjustable range
Disable white balance mode by pressing ENTER
Disable backlight compensation
Enable backlight compensation
Enable highlight compensation
ON / OFF
0~255 Adjustable range
0~255 Adjustable range
0~255 Adjustable range
0~255 Adjustable range
0~255 Adjustable range
LUMINANCE:
LOW / MID / HIGH
CONTRAST:
LOW / MIDLOW / MID / MIDHIGH / HIGH
Disable digital wide dynamic range
DETECT SENSE: 0~127 Adjustable range
BLOCK DISP:
ON / OFF / ENABLE
MONITOR AREA: ON / OFF
AREA SEL:
Up to 4 selectable zones
TOP:
0~244 Adjustable range
BOTTOM:
0~244 Adjustable range
LEFT:
0~474 Adjustable range
RIGHT:
0~474 Adjustable range
Disable motion detection
8)
NEXT
Access Menu Diagram 2 (see page 5)
9)
EXIT
Exit menu and save settings
10)
SAVE ALL
Save menu settings without exiting the menu
1 In
MANUAL LENS mode, only SHUT mode is available. In AUTO LENS mode, SHUT + AUTO IRIS and AUTO IRIS
modes are also available.
4
SECO-LARM U.S.A., Inc.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Menu Diagram 2:
SETUP MENU
1)
DAY / NIGHT
(see page 10)
SETTING
AUTO
COLOR
B/W
SETTING OPTIONS
BURST:
ON / OFF
DELAY CNT:
0~255 Adjustable range
DAY
NIGHT: 0~255 Adjustable range
NIGHT
DAY: 0~255 Adjustable range
Display color image
BURST:
ON / OFF
NR MODE:
OFF / Y / C / Y/C
Y LEVEL:
0~15 Adjustable range
C LEVEL:
0~15 Adjustable range
Set a name for the camera to display on screen
Disable camera ID
2)
2DNR
(see page 11)
3)
CAMERA ID
(see page 11)
SYNC
(see page 11)
LANGUAGE
(see page 12)
CAMERA RESET
(see page 12)
ON
OFF
7)
BACK
Access Menu Diagram 1 (see page 4)
8)
EXIT
Exit menu and save settings
9)
SAVE ALL
Save menu settings without exiting the menu
4)
5)
6)
Function is not used
English, Chinese, Japanese, German, French, Russian, Portuguese, Spanish
Reset camera to factory settings
Lens:
This function is used to select the camera’s lens type.
1.
2.
3.
Select LENS on the SETUP menu screen.
Select the desired lens type by pressing the joystick button.
Select RETURN to return to the SETUP menu.
AUTO: Select automatic mode for DC
Auto Iris lens.
• TYPE: Select lens type (DC or
VIDEO).
• MODE: Select the mode (AUTO,
OPEN, or CLOSE).
• SPEED: Set the Auto Iris movement
speed. Adjustable range: 0~255.
 MANUAL: Select manual mode for
manual or fixed lens.
SECO-LARM U.S.A., Inc.
5
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Shutter / Automatic Gain Control (AGC):
This function is used to manually adjust the shutter speed and AGC settings.
1.
2.
3.
Select SHUTTER / AGC on the SETUP menu screen.
Select the desired shutter or AGC type by pressing the joystick button.
Select RETURN to return to the SETUP menu.
AUTO: The camera is in automatic shutter
mode.
A. HIGH LUMINANCE
• MODE: Select shutter mode.
- SHUT – This function is not used.
- AUTO IRIS – Adjust the iris to
allow a specific amount of
exposure.
- SHUT + AUTO IRIS –
Combination of both SHUT and
AUTO IRIS.
In manual lens mode, only SHUT mode is available. In automatic lens mode, only
AUTO IRIS or SHUT + AUTO IRIS modes are available.
• BRIGHTNESS: Set the auto-exposure image brightness. Adjustable range: 0~255.
B. LOW LUMINANCE
• MODE: Select low luminance mode (AGC or OFF).
• BRIGHTNESS: Select the automatic gain value. This setting has no effect if AGC is
on. Adjustable range: x0.25, x0.50, x0.75, x1.00.
 MANUAL: The camera is in a fixed shutter
mode.
• MODE: This function is not used.
• SHUTTER: Selectable shutter speed.
Adjustable range: 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000,
1/10000.
• AGC: Set the gain value.
Adjustable range: 6.00, 12.00, 18.00,
24.00, 30.00, 36.00, 42.00, 44.80.
6
SECO-LARM U.S.A., Inc.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
White Balance:
This function is used to adjust the color temperature and image color of the picture.
1.
2.
3.
Select WHITE BAL on the SETUP menu screen.
Select the desired white balance mode by
pressing the joystick button.
Select RETURN to return to the SETUP menu.
Automatic Tracking White Balance
(ATW): When the image color temperature
changes, it will automatically adjust the
white balance color temperature range from
1,800°K~10,500°K (ex.: a fluorescent light
or outdoors).
•
•
•
•

SPEED: Set the ATW speed. Adjustable range: 0~255.
DELAY CNT: Set the ATW delay time. Adjustable range: 0~255.
ATW FRAME: Set the ATW zone ratio. Adjustable range: x0.50, x1.00, x1.50, x2.00.
ENVIRONMENT: Set the ATW environment (INDOOR or OUTDOOR).
PUSH: In PUSH mode, the white balance
setting will be disabled.
USER 1/2 WB: Independently set the white
balance setting for USER 1 or USER 2.
• B-GAIN: Set the blue gain.
Adjustable range: 0~255.
• R-GAIN: Set the red gain.
Adjustable range: 0~255.

ANTI CR: Select this mode when color
rolling or flickering caused by the
unmatched frequency of electric lights
occurs.
MANUAL: Set the white balance level
manually.
• LEVEL: Set the color on-screen.
Adjustable range: 26~72.

PUSH LOCK: In PUSH LOCK mode, the
white balance setting will be disabled when
the ENTER button (OSD controller) or
joystick is pressed.
SECO-LARM U.S.A., Inc.
7
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Backlight Compensation (BLC):
This function is used to control the light level to overcome strong backlight conditions.
1.
2.
3.
Select BACKLIGHT on the SETUP menu screen.
Select the desired BLC mode by pressing the joystick button.
Select RETURN to return to the SETUP menu.

Backlight Compensation (BLC): Select this mode to correct the exposure of subjects in
front of a strong backlight.

Highlight Compensation (HLC): Select this mode to improve the picture by displaying
shades of gray on a strong highlight.
BLC OFF
BLC ON
HLC OFF
HLC ON
Picture Adjustment:
This function is used to adjust the color temperature and image color of the picture.
1.
2.
3.
Select PICT ADJUST on the SETUP menu screen.
Select the desired picture setting by pressing the
joystick button.
Select RETURN to return to the SETUP menu.
• MIRROR: Flip the image horizontally.
• BRIGHTNESS: Set picture brightness.
Adjustable range: 0~255.
• CONTRAST: Set picture contrast.
Adjustable range: 0~255.
• SHARPNESS: Set picture sharpness.
Adjustable range: 0~255.
• HUE: Set picture hue.
Adjustable range: 0~255.
• GAIN: Set picture gain.
Adjustable range: 0~255.
8
SECO-LARM U.S.A., Inc.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Digital Wide Dynamic Range (D-WDR):
This function will adjust the brightness value of the image for a more detailed picture.
1.
2.
3.
Select D-WDR on the SETUP menu screen.
Select the desired D-WDR setting by pressing
the joystick button.
Select RETURN to return to the SETUP menu.
• LUMINANCE: Set the D-WDR brightness
(LOW, MID, or HIGH).
• CONTRAST: Set the D-WDR contrast
(LOW, MIDLOW, MID, MIDHIGH, or HIGH).
D-WDR OFF
D-WDR ON
Motion Detection:
This function is used to detect moving objects on-screen.
EV-6680 Series Only: The motion-activated LED is tied to the motion detection feature. Turn
MOTION DET ON or OFF to turn the motion-activated LED ON or OFF.
1.
2.
Select MOTION DET on the SETUP menu screen.
Select the desired MOTION DET mode by
pressing the joystick button.
• DETECT SENSE: Set detection sensitivity.
Adjustable range: 0~255.
• BLOCK DISP: Mosaic blocks will appear
where movement is present (ON, OFF, or
ENABLE). In ENABLE mode, select a certain
area in which motion is not detected. To exit
Note: If motion detection is turned
ENABLE mode, press down on the joystick for
ON for EV-6680-N3WQ and
2 seconds and then release.
EV-6680-P3WQ,
a red LED will turn
• MONITOR AREA: Set detection area.
ON
every
time
motion
is detected.
• AREA SEL: Set up to 4 detection zones.
- TOP: Set vertical start position. Adjustable range: 0~244.
- BOTTOM: Set vertical end position. Adjustable range: 0~244.
- LEFT: Set horizontal start position. Adjustable range: 0~244.
- RIGHT: Set horizontal end position. Adjustable range: 0~244.
SECO-LARM U.S.A., Inc.
9
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Next:
Select to advance to the next menu diagram.
Exit:
Select to save current settings and exit the SETUP menu.
Save All:
Select to save menu settings without exiting the SETUP menu.
Day/Night Mode:
This function will adjust the brightness value of the image for a more detailed picture.
1.
2.
3.
Select DAY/NIGHT on the SETUP menu screen.
Select the desired DAY/NIGHT setting by
pressing the joystick button.
Select RETURN to return to the SETUP menu.
AUTO: The camera image will switch to
color in normal situations and B/W when
ambient light is low.
• BURST: Set BURST mode (ON or OFF). When BURST mode is ON, the image colors will
be suppressed but present when the camera switches to B/W mode. When BURST mode
is OFF, the image colors will be B/W when the camera switches to B/W mode.
• DELAY CNT: Set the COLOR/B&W interchange delay time. Adjustable range: 0~255 sec.
• DAY NIGHT: Define light level to trigger B/W mode. Adjustable range: 0~255.
• NIGHT DAY: Define light level to trigger COLOR mode. Adjustable range: 0~255.

PUSH: The camera image will always display in color.
B/W: The camera image will always display in B/W.
• BURST: Set BURST mode (ON or OFF). When
BURST mode is ON, the image colors will be
suppressed but present when the camera
switches to B/W mode. When BURST mode is
OFF, the image colors will be B/W when the
camera switches to B/W mode.
• IR OPTIMIZER: Turn ON or OFF.
• MODE: AUTO optimizes the IR, or optimizes to
the CENTER.
• LEVEL: Sets the level of IR optimization.
Adjustable range: 0~255.
10
SECO-LARM U.S.A., Inc.
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
2D Noise Reduction (2DNR):
This function is used to adjust the gain level to reduce the interference on the screen in an area
with low illumination.
1.
2.
3.
Select NR on the SETUP menu screen.
Select the desired 2D NR setting by pressing the
joystick button.
Select RETURN to return to the SETUP menu.
• NR: Set the noise reduction mode (OFF, Y, C,
or Y/C).
• Y LEVEL: Set the brightness signal noise
reduction level. Adjustable range: 0~15.
• C LEVEL: Set the color signal noise reduction
level. Adjustable range: 0~15.
2D-NR OFF
2D-NR ON
Camera ID:
This function is used to set a name for the camera.
1.
2.
3.
4.
Select CAMERA ID on the SETUP menu screen.
Turn CAMERA ID ON or OFF by pressing the
joystick button.
If CAMERA ID is ON, use the cursor to select the
character in the alphabet list. Press the joystick
button to select the character.
Select RETURN to return to the SETUP menu.
•
•
•
•
•
CHR1/CHR2: Functions not used.
: Adjust the cursor position.
CLR: Forward delete the selected character.
POS: Set the location of the CAMERA ID text.
RETURN: Save and return to the SETUP menu.
Sync:
This function is not used.
SECO-LARM U.S.A., Inc.
11
ENFORCER OSD (On-Screen Display) for Covert PIR Camera
Language:
This function is used to select the OSD display language.
1.
2.
Select LANGUAGE by moving the cursor UP and DOWN on the SETUP menu screen.
Select the desired language by pressing the joystick button.
Camera Reset:
Select to return the camera settings to factory default.
Back:
Select to return to the previous menu diagram.
Exit:
Select to save current settings and exit the SETUP menu.
Save All:
Select to save menu settings without exiting the SETUP menu.
Troubleshooting:
The screen is blank, despite working as
before using the joystick.
• Check that the camera is powered up.
• Check that the monitor is powered up.
• Check that the power supply’s polarity is correct.
IMPORTANT: Users and installers of this product are responsible for ensuring this product complies with all national, state, and
local laws and statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the
use of the product in violation of any current laws or statutes.
FCC COMPLIANCE STATEMENT: Information to the user: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his or her own expense.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service
for two (2) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of
any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or
attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty
installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes
other than defects in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be
limited to the replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral,
incidental, or consequential personal or property damage of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECOLARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change
specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Website: www.seco-larm.com
PICVN3
Phone: (949) 261-2999 | (800) 662-0800
Email: [email protected]
MiEV-668x-N3WQ_OSD_1402.docx
12
SECO-LARM U.S.A., Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement