SOT-23 Single Op Amp Evaluation Board User Guide UG-838

SOT-23 Single Op Amp Evaluation Board User Guide UG-838
SOT-23 Single Op Amp
Evaluation Board User Guide
UG-838
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for Single, High Speed Op Amps Offered in 5-Lead SOT-23 and
6-Lead SOT-23 Packages
FEATURES
EVALUATION BOARD IMAGES
Enables quick breadboarding/prototyping
User defined circuit configuration
Edge mounted SMA connector provisions
Easy connection to test equipment and other circuits
RoHS compliant
GENERAL DESCRIPTION
The 6-layer evaluation board accepts SMA edge-mounted
connectors on the inputs and outputs for efficient connection to
test equipment or other circuitry. The ground plane, component
placement, and supply bypassing minimize parasitic inductance
and capacitance. The evaluation board components are primarily
SMT 0603 case size, with the exception of the electrolytic bypass
capacitors (C1 and C2), which are 3528 case size.
13193-001
The Analog Devices, Inc., SOT-23 evaluation board evaluates
single, high speed op amps offered in 5-lead and 6-lead SOT-23
packages. The evaluation board is a bare board that enables users
to quickly prototype a variety of single op amp circuits, which
minimizes risk and reduces time to market. Figure 1 shows the
component side of the bare evaluation board. Figure 2 shows
the circuit side of the bare evaluation board.
Figure 1. Component Side of Evaluation Board
13193-002
Figure 3 shows the evaluation board schematic. The printed
circuit board (PCB) assembly drawings are shown in Figure 4
and Figure 5. The layout pattern for the PCB is shown in Figure 6
and Figure 7.
Figure 2. Circuit Side of Evaluation Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 5
UG-838
SOT-23 Single Op Amp Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
Evaluation Board Schematic and Artwork.....................................3
General Description ......................................................................... 1
Ordering Information .......................................................................5
Evaluation Board Images ................................................................. 1
Bill of Materials ..............................................................................5
Revision History ............................................................................... 2
REVISION HISTORY
10/15—Revision 0: Initial Version
Rev. 0 | Page 2 of 5
SOT-23 Single Op Amp Evaluation Board User Guide
UG-838
EVALUATION BOARD SCHEMATIC AND ARTWORK
VEE
C4*
C2
+ 10µF
R1*
INP
R6*
R3*
OUT
3
2
1
R7*
+
R5*
–
SOT-23
4
5
6
R2*
+
INN
R4*
C3*
+
1
VCC
C1
10µF
R8*
VEE
VCC
13193-003
PD
2
*USER-DEFINED VALUE.
13193-004
Figure 3. Evaluation Board Schematic
13193-005
Figure 4. Component Side Assembly Drawing
Figure 5. Circuit Side Assembly Drawing
Rev. 0 | Page 3 of 5
13193-006
SOT-23 Single Op Amp Evaluation Board User Guide
Figure 6. Component Side Layout Pattern
13193-007
UG-838
Figure 7. Circuit Side Layout Pattern
Rev. 0 | Page 4 of 5
SOT-23 Single Op Amp Evaluation Board User Guide
UG-838
ORDERING INFORMATION
BILL OF MATERIALS
Table 1.
Quantity
1
1
2
2
2
3
8
1
Reference Designator
VEE, VCC, GND
PD
GND
C1, C2
C3, C4
INP, INN, OUT
R1 to R8
Device under test
Description
Power connector
Power-down/disable pin
Test point
10 µF
Capacitor, user defined
SMA SMT
Resistor, user defined
Amplifier
Package
3-pin power connector
2-pin header
Test point pin
3528
C603
SMA SMT
R603
SOT-23-5 or SOT-23-6
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2015 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG13193-0-10/15(0)
Rev. 0 | Page 5 of 5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement