UG-020: Universal Evaluation Board for Quad High Speed Op Amps Offered in 14-Lead TSSOP Packages PDF

Evaluation Board User Guide
UG-020
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Universal Evaluation Board for Quad High Speed Op Amps
Offered in 14-Lead TSSOP Packages
FEATURES
market. Figure 1 shows the circuit side and the component side
of the evaluation board.
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
GENERAL DESCRIPTION
The Analog Devices, Inc., EB-O14RU-4Z universal evaluation
board is designed to help users evaluate quad high speed op
amps offered in 14-lead TSSOP packages. The EB-O14RU-4Z is
a bare board (that is, there are no components soldered to the
board) that enables users to quickly prototype a variety of quad
op amp circuits, which minimizes risk and reduces time to
The evaluation board is a 2-layer PCB that accepts SMA edgemounted connectors on the inputs and outputs for efficient
connection to test equipment or other circuitry. The ground
plane, component placement, and supply bypassing are
designed to minimize parasitic inductances and capacitances.
The evaluation board components are primarily SMT 0805 case
size, with the exception of the electrolytic bypass capacitors (C1
and C2), which are 3528 case size.
Figure 2 shows the evaluation board schematic. The PCB layout
pattern for the PCB is shown in Figure 4 and Figure 6.
DIGITAL PICTURE OF EVALUATION BOARD
COMPONENT SIDE
Figure 1. EB-O14RU-4Z Component Side and Circuit Side of the PCB
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 4
08147-001
CIRCUIT SIDE
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELING ON YOUR BOARD MAY BE DIFFERENT
FROM WHAT IS SHOWN HERE.
Figure 2. Universal Evaluation Board
Rev. 0 | Page 2 of 4
*
*
AGND
R1
*
R36
OUT2
*
R6
AGND
*
*
*
*
*
R5
*
AGND
AGND
AGND
AGND
R29
*
R8
*
R30
*
R26
R7
*
R4
R20
R27
AGND
AGND
AGND
AGND
*
R34
*
R28
I N1+
R18
+I N2
- I N2
I N1-
OUT1
R2
*
R31
*
R3
+VS
VOUT3
- I N3
+I N3
- VS
+I N4
* USER DEFI NED
8
9
10
11
12
VOUT4 14
- I N4 13
AD8029_30_40
5 +I N2
6 - I N2
7 VOUT2
3 +I N1
4 +VS
1 VOUT1
2 - I N1
U1
- VS
*
R25
*
AGND
*
*
R24
R19
*
*
R21
AGND
*
R14
*
R12
R23
AGND
*
R15
AGND
*
R13
*
R10
*
*
R33
AGND
R22
AGND
*
R11
OUT3
AGND
*
R35
AGND
*
R16
AGND
*
R17
OUT4
AGND
*
- I N3
R32
I N4+
I N4-
+I N3
C1
10UF
C2
10UF
GND1
AGND
AGND
GND2
- VS
- VS
+VS
+VS
GND3
*
*
C4
C3
AGND
GND4
*
C5
AGND
08147-002
R9
UG-020
Evaluation Board User Guide
08147-005
UG-020
08147-003
Evaluation Board User Guide
Figure 3. Board Assembly Drawing, Circuit Side
Figure 5. Board Assembly Drawing, Component Side
Figure 4. Board Layout Pattern, Circuit Side
Figure 6. Board Layout Pattern, Component Side
Rev. 0 | Page 3 of 4
UG-020
Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08147-0-2/10(0)
Rev. 0 | Page 4 of 4