Evaluation Board User Guide
UG-026
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Universal Evaluation Board for Triple, High Speed Op Amps
Offered in 14-Lead TSSOP Packages
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
RoHS compliant
The 2-layer evaluation board accepts SMA edge-mounted connectors on the inputs and outputs for efficient connection to test equipment or other circuitry. The ground plane, component placement, and supply bypassing are designed to minimize parasitic inductance and capacitance.
Figure 3 shows the evaluation board schematic. The PCB assembly drawings are shown in Figure 4 and Figure 5. The
layout patterns for the PCB are shown in Figure 6 and Figure 7.
GENERAL DESCRIPTION
The Analog Devices, Inc., EB-O14RU-3Z universal evaluation board is designed to help users evaluate triple, high speed op amps offered in 14-lead TSSOP packages. The EB-O14RU-3Z is a bare board (that is, there are no components soldered to the board) that enables users to quickly prototype a variety of triple op amp circuits, which minimizes risk and reduces time to market.
Figure 1 shows the component side of the bare evaluation board, and Figure 2 shows the circuit side of the bare evaluation board.
EVALUATION BOARD, COMPONENT SIDE AND CIRCUIT SIDE
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART
NUMBER LABELING ON YOUR BOARD MAY
BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 1. Component Side of Evaluation Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
NOTES
1. THE EVALUATION BOARD SILKSCREEN PART
NUMBER LABELING ON YOUR BOARD MAY
BE DIFFERENT FROM WHAT IS SHOWN HERE.
Figure 2. Circuit Side of Evaluation Board
UG-026
TABLE OF CONTENTS
Features .............................................................................................. 1
General Description ......................................................................... 1
Evaluation Board, Component Side and Circuit Side ................. 1
Revision History ............................................................................... 2
REVISION HISTORY
4/10—Revision 0: Initial Version
Evaluation Board User Guide
Evaluation Board Schematic, Assembly Drawings, and Layout Patterns ...........................................................................3
Ordering Information .......................................................................5
Bill of Materials ..............................................................................5
Rev. 0 | Page 2 of 8
Evaluation Board User Guide
EVALUATION BOARD SCHEMATIC, ASSEMBLY DRAWINGS, AND LAYOUT PATTERNS
R1A* R2A*
R0805
AGND
R6A*
RC0603V
6
RC0603V
Z1
7 R4A* Z1A
DIS
OUTA
R7A* 5
R0805
SMASMT
INA
SMASMT 1
RC0603V
UG-026
TPIN
PD1/DIS1
AGND
AGND AGND
INB
R1B*
R0805
AGND
R6B*
RC0603V
SMASMT
R7B*
RC0603V
AGND
R2B*
RC0603V
9
10
Z1B
DIS
Z1
8
2
TPIN
PD2/DIS2
AGND
R4B*
R0805
SMASMT
OUTB
AGND
INC
R1C*
R0805
AGND
R6C*
RC0603V
SMASMT
R7C*
RC0603V
AGND
R2C*
RC0603V
13
12
Z1C
DIS
Z1
14
3
TPIN
PD3/DIS3
AGND
* USER-DEFINED VALUE.
R4C*
R0805
SMASMT
OUTC
AGND
Figure 3. Universal Evaluation Board Schematic
C3528
10UF
C2
+VS
TPIN
C1
10UF
C3528
C3*
C0603
AGND
-VS
TPIN
AGND
C4*
C0603
C5*
C0603
+VS
-VS
GND
TPIN
AGND
Figure 4. Component Side Assembly Drawing
Rev. 0 | Page 3 of 8
Figure 5. Circuit Side Assembly Drawing
UG-026 Evaluation Board User Guide
Figure 6. Component Side Layout Pattern Figure 7. Circuit Side Layout Pattern
Rev. 0 | Page 4 of 8
Evaluation Board User Guide
ORDERING INFORMATION
BILL OF MATERIALS
9
1
Table 1.
Quantity Reference Designator
6
2
Description
+VS, −VS, PD1/DIS1, PD2/DIS2, PD3/DIS3, GND Connectors
C1, C2 10 µF
3
6
15
C3, C4, C5
INA, INB, INC, OUTA, OUTB, OUTC
R1A, R1B, R1C, R3A, R3B, R3C, R4A, R4B, R4C,
R5A, R5B, R5C, R8A, R8B, R8C
R2A, R2B, R2C, R6A, R6B, R6C, R7A, R7B, R7C
DUT
Capacitor, user defined
SMA SMT
Resistor, user defined
Resistor, user defined
Amplifier
Package
TP1
3528
C0603
SMA SMT
R0805
R0603
14-lead TSSOP
UG-026
Rev. 0 | Page 5 of 8
UG-026
NOTES
Evaluation Board User Guide
Rev. 0 | Page 6 of 8
Evaluation Board User Guide
NOTES
UG-026
Rev. 0 | Page 7 of 8
UG-026
NOTES
Evaluation Board User Guide
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2010 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08152-0-4/10(0)
Rev. 0 | Page 8 of 8
