Installation / User Guide
Operating and Installation
Instructions
Ventilation System
DA 424 V
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
en - US
M.-Nr. 07 261 690
2
Contents
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Guide to the hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Turning on the fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Select the power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Delayed Shut Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning off the fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the lighting on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dimming the lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Grease filter timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the height of the canopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning the casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Grease filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Changing the light bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Appliance dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Structural support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Installation accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Limiting the adjustable range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Air extraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
IMPORTANT SAFETY INSTRUCTIONS
Read these Operating Instructions carefully before installing or
using the Ventilation System.
This appliance is intended for
residential use only. Use the
appliance only for its intended
purpose. The manufacturer cannot
be held responsible for damages
caused by improper use of the
hood.
This appliance complies with current
safety requirements. Improper use
of the appliance can lead to
personal injury and material
damage.
READ AND SAVE THESE
INSTRUCTIONS
CAUTION
For General Ventilating Use Only.
Do not use to exhaust hazardous or
explosive materials and vapors.
~ This appliance is designed to vent
cooking smoke and odors only.
~ Be certain your appliance is
properly installed and grounded by a
qualified technician.
To guarantee the electrical safety of this
appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician. The manufacturer
cannot be held responsible for
damages caused by the lack, or
inadequacy, of an effective grounding
system.
~ Before connecting the appliance to
the power supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent machine
damage. If in doubt consult a qualified
electrician.
~ Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held
responsible.
4
IMPORTANT SAFETY INSTRUCTIONS
~ This equipment is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Department with specific requirements.
WARNING - TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
~ Use this unit only in the manner
intended by the manufacturer. If you
have questions, contact the
manufacturer.
~ Before servicing or cleaning the unit,
switch power off at the service panel
and lock the service disconnecting
means to prevent power from being
switched on accidentally. If the service
disconnecting means cannot be
locked, securely fasten a prominent
warning device, such as a tag, to the
service panel.
~ Before discarding an old appliance,
disconnect it from the power supply
and remove the power cord to prevent
hazards.
Use
~ Do not allow children to play with or
operate the appliance or its controls.
Supervise its use by the elderly or
infirm.
~ Do not flambé or grill with an open
flame beneath the hood.
Flames could be drawn up into the
hood by the suction and the grease
filters may catch fire.
~ Never operate gas burners without
cookware. Turn the burner off when not
in use. Adjust the burner so that the
flames do not extend beneath the
cookware. Do not overheat the
cookware, e.g. when using a wok. The
hood can be damaged due to
excessive heat from the burners and
the cookware.
~ Do not use the hood without the
grease filter in place.
~ Clean the grease filter regularly.
Dirty filters are a fire hazard.
~ Do not use a steam cleaner to clean
the hood. Steam could penetrate
electrical components and cause a
short circuit.
~ Always turn on the hood when using
the cooktop to prevent damage from
condensation.
~ This hood has an adjustable
canopy. Be sure that no one is above or
below the canopy while it is being
adjusted. While the canopy is in motion
refrain from using the cooktop until the
hood is at the desired position.
5
IMPORTANT SAFETY INSTRUCTIONS
, WARNING - TO REDUCE
THE RISK OF A COOKTOP
GREASE FIRE:
~ Never leave surface units
unattended at high settings. Boilovers
cause smoking and greasy spillovers
may ignite. Heat oils slowly on low or
medium settings.
~ Always turn the hood on when
cooking at high heat.
~ Clean ventilating fans frequently.
Grease should not be allowed to
accumulate on fan or filter.
~ Use proper pan size. Always use
cookware appropriate for the size of the
surface element.
, WARNING
TO REDUCE THE RISK OF INJURY
TO PERSONS, IN THE EVENT OF A
COOKTOP GREASE FIRE, OBSERVE
THE FOLLOWING:
~ SMOTHER FLAMES with a close
fitting lid, cookie sheet, or metal tray
then turn off the burner.
BE CAREFUL TO PREVENT BURNS.
If the flames do not go out immediately,
EVACUATE AND CALL THE FIRE
DEPARTMENT.
~ NEVER PICK UP A FLAMING PAN
- You may be burned.
~ DO NOT USE WATER, including
wet dishcloths or towels - a violent
steam explosion will result.
~ Use a fire extinguisher
ONLY if:
– You have a class ABC extinguisher,
and you know how to operate it.
– The fire is small and contained in the
area where it started.
– The fire department is being called.
You can fight the fire with your back to
an exit.
6
IMPORTANT SAFETY INSTRUCTIONS
Installation
~,
WARNING
To reduce the risk of fire only use
metal ductwork.
~ Any fittings, sealant, or materials
used to install the ductwork must be
made of approved non-flammable
materials.
~ Provided a larger distance is not
given by the manufacturer of the
cooktop, follow the minimum safety
distances between a cooktop and the
bottom of the hood:
– 22" (550 mm) above electric
cooktops,
– 30" (762 mm) above gas cooktops,
– 26" (650 mm) above an open electric
grill or an open electric boiler/fryer.
If local building codes require a greater
safety distance, follow their
requirement.
If there is more than one appliance
beneath the hood and they have
different minimum safety distances
always select the greater distance.
~ Do not install this hood over
cooktops burning solid fuel.
~ Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance,
(e.g. danger of overheating).
~ Never connect an exhaust hood to
an active chimney, dryer vent, vent flue,
or room ventilating ductwork. Seek
professional advice before connecting
an exhaust hood vent to an existing,
inactive chimney or vent flue.
WARNING - TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
~ Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction.
~ Sufficient air is needed for
combustion and exhausting of gases
through the flue (chimney of fuel
burning equipment to prevent back
drafting. Follow the heating equipment
manufacturer’s guideline and safety
standards such as those published by
the National Fire Protection Association
(NFPA) and the American Society for
Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and
the local code authorities.
~ When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
~ Ducted fans must always be vented
to the outdoors.
7
Guide to the hood
8
Guide to the hood
a Cover frame
k Grease filter button
b Telescopic chimney
The indicator next to the grease filter
button lights when the grease filter
needs to be cleaned.
c Canopy
The canopy is not designed to be
used as a shelf.
d Grease filter
e Control panel
f Overhead lighting
g Light button
This button turns the light on and off
and also dims the light.
h On/Off button
i Fan power level buttons
Four fan speed selection.
j Delayed Shut Down
This button is also used:
– to reset the grease filter timer after
cleaning the grease filter (see
"Cleaning and Care").
– to show how long the grease filter
has been in use (see "Operation /
Grease filter timer").
– to change the number of hours
counted by the grease filter timer
(see "Operation / Reprogramming the
grease filter timer").
l Control to raise and lower the
canopy
The canopy can be adjusted by
11 13/16" (300 mm)
This button activates the Delayed Shut
Down feature. The fan can be set to
turn off automatically after either 5 or
15 minutes.
9
Functional description
The ventilation hood works by air
extraction. The air is drawn in and
cleaned by the grease filter and
directed outside.
The hood comes equipped with a
non-return flap. This flap automatically
closes when the hood is turned off so
that no exchange of outside air and
room air can occur. When the hood is
turned on, the air pressure of the
exhaust fan automatically opens the
flap blowing the inside air and cooking
odors outside.
10
Operation
Turning on the fan
^ Press the On/Off button.
The fan switches to level "2".
The indicator light comes on.
Select the power level
^ Use the buttons "– / +" to select the
desired performance level.
Automatically switching back the
intensive power level
The intensive level "4" can be
programmed to automatically switch
back to level "3" after 10 minutes.
^ Turn the fan and the lights off.
^ Press and hold the "Delay Shut down"
button for 10 secs. The first indicator
lights.
^ Press the following buttons one after
another,
Button "+" = more power
Button "–" = less power
Typically, levels "1" to "3" (green
indicator light) are sufficient for regular
cooking needs.
– light
Intensive setting
To remove intensive vapors or odors,
for example when pan-frying, level "4"
the can be used temporarily (yellow
indicator light).
– the "–" button, and
– the light button again.
11
Operation
Delayed Shut Down
If the power level indicators "1" and "4"
flash, the automatic switch back is not
activated.
^ To activate the automatic switch back
press the "+" button.
If odors or smoke remain in the kitchen
after cooking has been completed, the
Delayed Shut Down feature can be
selected to allow the hood to continue
running for either 5 or 15 minutes. After
that period of time the fan turns off
automatically.
The power level indicators "1" and "4"
light continuously.
^ To deactivate press the "–" button.
^ To save the setting press the "Delay
Shut Down" button.
If the procedure is not stored within 4
minutes of programming, the hood will
automatically default to the "old" data.
^ Press the Delayed Shut Down button
while the fan is still running.
Press once = 5 minute delay
(left indicator lights)
Press twice = 15 minute delay
(right indicator lights)
To cancel the feature press the
Delayed Shut Down button again. The
fan will not turn off automatically.
Turning off the fan
^ Press the On/Off button to turn the
fan off.
The indicator goes out.
12
Operation
Turning the lighting on/off
Safety cut-out feature
The overhead lighting can be turned on
and off independently of the fan.
If the exhaust hood is left unattended
for more than 10 hours, the fan is
automatically turned off. The lighting
remains on.
^ Press the light button briefly to turn
on the lighting.
The light button indicator illuminates
and the lighting comes on at maximum
brightness.
^ To turn the fan back on again, press
the On/Off button.
^ Press the light button briefly again to
turn off the lighting.
The light button indicator will go out.
Dimming the lighting
The brightness of the lighting can be
adjusted.
^ While the lighting is turned on, press
and hold the light button.
The lighting will dim until the button is
released.
^ If the button is pressed again, the
lighting will brighten until the button is
released.
If the button is pressed continuously,
the light will cycle between bright and
dark.
Press the light button again to turn off
the lighting.
13
Operation
Grease filter timer
Checking the grease filter timer
A timer monitors the hours of fan
operation. The indicator for the grease
filter will light after 30 hours of operation
or the preselected time. The grease
filter must then be cleaned. See
"Cleaning and care / Grease Filter".
To check the percentage of time
already used:
After the grease filter has been cleaned
and put back in place, the grease filter
timer must be re-set.
^ Press the On/Off button to turn the
fan on.
^ Press the grease filter button.
^ To do this, press the grease filter
button for about 3 seconds while the
fan is running.
The indicator lights.
The indicator will go out.
The number of flashing "–/+" indicators
show the percentage of programmed
hours that have been used.
1 indicator
2 indicators
3 indicators
4 indicators
= 25 %
= 50 %
= 75 %
= 100 %
This information will remain stored in
memory in the event of a power failure.
14
Operation
Reprogramming the grease filter
timer
The grease filter timer is preset to
30 hours. This time can be lengthened
or shortened to 20, 30, 40 or 50 hours.
– A time of 20 hours should be
programmed in kitchens with
frequent pan or deep frying.
– If you tend to cook fat-free, choose a
longer operating time.
– A time of 20 hours should also be
programmed if the kitchen is only
used occasionally to prevent grease
which has accumulated over a long
period of time from hardening on the
filter, making cleaning more difficult.
The lit "–/+" indicator shows the
programmed time:
1st indicator from the left
2nd indicator from the left
3rd indicator from the left
4th indicator from the left
=
=
=
=
20 hours
30 hours
40 hours
50 hours
^ Use the "–/+" button to select the
desired time.
^ Store the selection by pressing the
grease filter button.
All the indicator lights go out.
^ Press the On/Off button to turn off the
fan.
If the procedure is not stored within
4 minutes of programming the hood
will automatically default to the "old"
data.
^ Press the Delayed Shut Down and
grease filter button at the same time.
The indicator for the grease filter timer
and one of the "–/+" indicators will flash.
15
Operation
Adjusting the height of the
canopy
Be sure that no one is above or
below the canopy while it is being
adjusted. While the canopy is in
motion refrain from using the
cooktop until the hood is at the
desired position.
The canopy is adjustable, allowing you
to:
– adjust the height of the exhaust hood
to the installation space.
– adjust the working space under the
exhaust hood to the height of the
user.
– better remove intense cooking
vapors by lowering the canopy.
– have more cooktop working space
by raising the canopy.
The height can be adjusted in a range
of 11 13/16" (300 mm).
^ To raise or lower the canopy briefly
touch the X or Y buttons.
After approx. 2 seconds the canopy will
begin to move up or down as selected.
^ If you press either of the buttons
again, the canopy will stop moving.
If you do not stop the canopy, it
automatically moves to the highest or
lowest position.
16
Continuously moving the canopy for
more than a few minutes at a time
will overheat the motor. It can be
used again after a short pause.
Cleaning and Care
,Before cleaning or servicing the
hood, disconnect it from the power
supply by either unplugging it from
the outlet, manually "tripping" the
circuit breaker or removing the fuse.
Cleaning the casing
,Never use on the hood:
- cleaning agents containing soda,
acids, chlorides or thinners,
- abrasive cleaning agents
e.g. powder or cream cleansers,
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discolored or damaged if not cleaned
regularly.
Do not use a stainless steel cleaner
on these controls.
- steel wool or abrasive sponges,
e.g. pot scourers or sponges which
have been previously used with
abrasive cleaning agents,
- limescale removers,
- caustic (oven) cleaners.
They will damage the surface.
^ The exterior surfaces and controls
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry using a soft cloth.
Only use a slightly damp sponge
when cleaning the controls. Water
could penetrate into the electronics
and cause damage.
17
Cleaning and Care
Grease filter
Removing the grease filter
The reusable metal grease filter
removes solid particles from the vented
kitchen air (grease, dust, etc).
The grease filter should be cleaned
every 3 - 4 weeks or whenever the
grease filter indicator lights.
Keep the grease filter clean to
prevent a fire hazard.
18
To remove the grease filter pull the
locking clip forward. Lower the filter 45°
unhook it at the rear and take it out.
Support the grease filter so that it does
not fall onto the cooktop.
Cleaning and Care
Cleaning the grease filter
^ By hand: use a scrub brush with a
solution of warm water and mild
detergent.
Do not use the pure detergent,
aggressive all purpose cleaners,
oven sprays, abrasive cleaning
agents or limescale removers. They
could destroy the filter.
^ In a dishwasher: place the filter
vertically in the lower basket, making
sure that the spray arm is not
blocked.
Use a hot temperature program,
e.g. "Heavy Soil" or "Pots and pans".
Use the recommended amount of
dishwasher detergent. Overuse could
destroy the filter.
Depending on the detergent,
cleaning the grease filter in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter will not be
affected by this discoloration.
^ After cleaning, the filter can be
placed on a towel to air dry.
^ While the filter is removed, clean any
dirt or grease from the interior casing
to prevent the risk of fire.
^ When putting the grease filter back
make sure that the locking clip is
facing the cooking surface.
^ If the filter is incorrectly installed,
insert a small screwdriver into the slit
along its edge to disengage it from
the casing.
^ After returning the grease filter, press
the grease filter button for 3 seconds
to reset the timer.
The indicator light will go out.
^ If the grease filter is cleaned before
the grease filter timer has reached its
maximum, the grease filter button
should be pressed for 6 seconds to
reset the counter to zero.
^ When putting the grease filter back
make sure that the locking clip is
facing the cooking surface.
19
Cleaning and Care
Changing the light bulbs
Disconnect the exhaust hood from
the power supply by either shutting
off the main breaker or completely
removing the fuse.
When in use halogen bulbs become
extremely hot, and can burn your
hands. Do not attempt to change the
bulbs until they have had sufficient
time to cool.
Do not touch the bulb surface.
Fingerprints or body oils deposited
on the bulb will decrease its life.
Please follow the manufacturer’s
instructions.
^ To change the halogen bulb, first
gently press the light cover. The
cover will open and can now be
flipped down.
^ Pull the halogen bulb from its socket,
then insert a new bulb.
^ Flip the light cover back up, making
sure it clicks into place.
20
After Sales Service
Repairs
MieleCare
In the event of a fault which you cannot
easily fix yourself, please contact the
Miele Technical Service Department.
(USA only)
^ When contacting the Technical
Service Department, please quote
the model and serial number of your
appliance.
These are shown on the data plate
which is visible when the grease filters
are removed.
MieleCare, our Extended Service
Contract program, gives you the
assurance of knowing that your
appliance investment is covered by
5 years of worry free ownership.
MieleCare is the only Extended Service
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory trained professionals can
guarantee the safety, reliability, and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by Miele’s Service
department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
http://store.miele.com
21
22
Installation Instructions
Caring for the environment
Disposal of packing material
Disposal of an old appliance
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Please recycle.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling center about the
possibility of recycling these materials.
To prevent suffocation of children,
ensure that any plastic wrappings,
bags, etc. are disposed of safely
and kept out of their reach.
24
Before discarding an old hood,
unplug it from the outlet and cut off
its power cord to prevent hazards.
Appliance dimensions
Exhaust connection 6" (150 mm) diameter
1) Opening for ductwork and power cord
25
Appliance dimensions
Distance between cooktop and
hood (S)
Do not install this exhaust hood over
cooktops burning solid fuel.
Provided a larger distance is not
given by the manufacturer of the
cooktop, follow the minimum safety
distances between a cooktop and
the bottom of the hood:
- 22" (550 mm) above electric
cooktops,
- 30" (762 mm) above gas cooktops,
- 26" (650 mm) above an open
electric grill or an open electric
boiler/fryer.
If local building codes require a
greater safety distance, follow their
requirement.
If there is more than one appliance
beneath the hood and they have
different minimum safety distances
always select the greater distance.
See "Important Safety Instructions"
for further information.
If the recommended safety distance is
not adhered to when the hood is in its
lowest position, the extension range
must be adjusted (see "Installation").
26
Structural support
The ceiling mounting plate will
support the weight of the hood. This
ceiling plate must be attached to
rigid structural framing that is
supported in its entirety by the
ceiling joists, or to the ceiling joists
directly. Do not attach the plate
directly to the ceiling with anchors,
toggle bolts, etc.
27
Installation accessories
Installation instructions
Installation accessories
^ See the enclosed installation
instruction sheet.
^ Please read the "Important Safety
Instructions" and Installation
Instructions before installing this
hood.
4 screws (8 x 60 mm) with 4 washers
for securing the ceiling plate.
(the S10 wall anchors included in the
packaging are NOT for use in the USA)
2 screws (M4 x 8 mm) for adjusting the
chimney.
4 leveling plates
for correcting an uneven ceiling.
1 exhaust connector
1 hose clip for securing the ducting.
28
Installation
Limiting the adjustable range
You can use the limit switch to set the
lower adjustable height range.
,Hold the chimney securely
throughout the following steps.
Danger of injury.
This may be necessary if the safety
clearance between the cooktop and the
hood is too small when the canopy is
lowered. You can use the limit switch to
set the canopy so it cannot be lowered
as far.
^ Install the hood as described in the
enclosed Installation sheet.
^ Press the "X" button. The canopy
moves to the lowest position.
^ Remove the grease filter from the
appliance.
dai2258
^ Push the chimney upwards.
dai2257
^ Remove the safety screw from the
canopy.
dai2259
^ Secure the chimney using the
previously removed safety screw.
29
Installation
dai2262
^ Secure the limit switch opposite the
guide on the chimney (see
illustration).
dai2260
^ Loosen the upper limit switch.
^ Lower the canopy to check that the
limit switch is working properly.
^ Remove the safety screw and lower
the chimney.
dai2340
^ To create a larger distance "S" from
the cooking surface a, raise the
canopy until the proper safety
distance is reached.
dai2264
^ Put the safety screw back in place to
secure the chimney.
^ Return the grease filter.
30
Air extraction
,WARNING
Danger of toxic fumes.
Gas cooking appliances release
carbon monoxide that can be
harmful or fatal if inhaled.
The exhaust gases extracted by
the hood should be vented
outside of the building only.
Do not vent exhaust air into
spaces within walls or ceilings or
in attics, crawl spaces, or garages
To reduce the risk of fire, only use
metal ductwork.
Please read and follow the
"IMPORTANT SAFETY
INSTRUCTIONS" to reduce the risk of
personal injury. Follow all local building
codes when installing the hood.
Exhaust ducting and connections
– The ducting should be as short and
straight as possible, and the number
of sharp bends should be minimized.
– For most efficient air extraction, the
diameter of the ductwork should not
be less than 6" (150 mm). Use of flat
ducts also reduces the air extraction
efficiency.
– Noise levels of the hood will increase
if flat ducts or round ducts of less
than 6" (150 mm) in diameter are
used.
– Use smooth or flexible pipes made
from approved non-flammable
materials for exhaust ducting.
– Where the ductwork is horizontal, it
must slope away from the hood at
least 1/8" per foot (1 cm per meter) to
prevent condensation dripping into
the appliance.
– If the exhaust is ducted through an
outside wall, a Miele Telescopic Wall
Vent can be used.
31
Air extraction
Condensate trap
optional accessory
In some cases, a condensate trap may
be required to collect and evaporate
any condensation which may develop.
This optional accessory is available for
ducts 5" (125 mm) and 5 7/8" (150 mm)
in diameter.
– If the exhaust is ducted into an
inactive flue, the air must be expelled
parallel to the flow direction of the
flue.
Never connect an exhaust hood to
an active chimney, dryer vent, flue,
or room venting ductwork. Seek
professional advice before
connecting an exhaust hood vent to
an existing, inactive chimney or vent
flue.
Important
If the ductwork runs through rooms,
ceilings, garages, etc. where
temperature variations exist, it may
need to be insulated to reduce
condensation.
32
^ When installing a condensate trap,
ensure that it is positioned vertically
and if possible directly above the
exhaust outlet.
Electrical connection
Important
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer can
not be held responsible for
unauthorized work.
Ensure that power to the appliance
is OFF while installation or repair
work is performed.
The hood must be hard wired
accordingly:
Black/Red wire:. . . . connect to L1 (live)
White wire: . . . . . connect to N (neutral)
Green wire: . . connect to GND (ground)
^ Verify that the voltage, load and
circuit rating information found on the
data plate (located behind the
grease filter), match the household
electrical supply before installing the
hood.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele’s
Technical Service Department. See
back cover for contact information.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Important
To increase security before the
machine is installed, it is
recommended to install a protective
switch (30 mA).
33
Technical Data
Total connected load . . . . . . . . . 580 W
Fan motor . . . . . . . . . . . . . . . . . 350 W
Height adjustment motor . . . . . . 150 W
Overhead lighting . . . . . . . . . 4 x 20 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V
Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit rating. . . . . . . . . . . . . . . . . . 15 A
34
35
Alteration rights reserved / 1508
For the most updated manual see the Miele web site.
M.-Nr. 07 261 690 / 00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising