PDF User Guides Rev. C

PDF User Guides Rev. C
Evaluation Board User Guide
UG-106
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for ADF4360-9 Integrated PLL and VCO Frequency Synthesizer
FEATURES
GENERAL DESCRIPTION
Self-contained board for generating RF frequencies
Flexibility for reference input, PFD frequency, and loop
bandwidth
Accompanying software allows complete control of
synthesizer functions from a PC
Flexibility for changing external inductor to allow different
VCO output frequency ranges
USB-/battery-operated 9 V supplies
Typical DIVOUT jitter performance of 1.4 ps
The EV-ADF4360-9EB1Z board is designed to allow the
user to evaluate the performance of the ADF4360-9 frequency
synthesizer consisting of an integrated PLL and VCO (see
Figure 1). It contains the ADF4360-9BCPZ, a USB connector,
and SMA connectors for the RF outputs. Unpopulated SMA
footprints are available for the power supplies, lock detect, and
the external reference input. The evaluation board also contains
the loop filter to complete the PLL. It can be modified as necessary
for the user’s PLL requirements. A USB cable is included with
the board to allow software programmability.
The package also contains a CD with Windows® software to allow
quick, user-friendly programming of the synthesizer. The CD
contains numerous other PLL data sheets, technical notes, articles,
and ADIsimPLL™ V3.4, Analog Devices, Inc., PLL simulation
software. More information is available at www.analog.com/pll.
08893-001
EVALUATION BOARD PHOTOGRAPH
Figure 1.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. C | Page 1 of 16
UG-106
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
Windows XP OS ............................................................................5
General Description ......................................................................... 1
Windows Vista OS and Windows 7 (32-Bit) OS .......................5
Evaluation Board Photograph ......................................................... 1
Windows 7 (64-Bit) OS ................................................................6
Revision History ............................................................................... 2
Using the Evaluation Board Software .............................................7
Evaluation Board Hardware ............................................................ 3
Evaluation Board Schematics...........................................................9
RF Output Stage ............................................................................ 3
Ordering Information .................................................................... 12
External Inductor Options .......................................................... 3
Bill of Materials ........................................................................... 12
Evaluation Board Software Quick Start Procedures .................... 5
Related Links ................................................................................... 13
REVISION HISTORY
2/12—Rev. B to Rev. C
Changed EVAL-ADF4360-9EBZ1 to EV-ADF4360-9EB1Z
Throughout ....................................................................................... 1
11/11—Rev. A to Rev. B
Changes to Features Section, General Description Section, and
Figure 1 .............................................................................................. 1
Changes to Evaluation Board Hardware Section and Figure 2 .. 3
Changes to Figure 3 .......................................................................... 4
Replaced Evaluation Board Software Section with Evaluation
Board Software Quick Start Procedures Section .......................... 5
Added Figure 5, Figure 6, and Figure 7; Renumbered
Sequentially ....................................................................................... 5
Added Figure 8 and Figure 9........................................................... 6
Replaced Programmable Software Settings Section with Using
the Evaluation Board Software Section ......................................... 7
Changes to Figure 10 ........................................................................ 8
Changes to Figure 11.........................................................................9
Changes to Figure 12...................................................................... 10
Changes to Figure 13...................................................................... 11
Changes to Table 1.......................................................................... 12
8/10—Rev. 0 to Rev. A
Document Title Changed from EVAL-ADF4360-9 to
UG-106 ................................................................................ Universal
Changes to Features and General Description Sections ..............1
Changes to Programmable Software Settings Section ..................5
Changed EVAL-ADF4360-9EB1 to EV-ADF4360-9EB1Z
Throughout ........................................................................................6
Changes to Table 1.............................................................................9
Deleted Ordering Guide and ESD Caution ................................ 11
9/08—Revision 0: Initial Version
Rev. C | Page 2 of 16
Evaluation Board User Guide
UG-106
EVALUATION BOARD HARDWARE
The evaluation board comes with a mini-USB cable to connect
to the USB port of a PC. The silkscreen for the evaluation board
is shown in Figure 2. It is important that the software be
installed before connecting the board. If the user encounters
any installation warning messages during connection, select
Continue Anyway. If another Install hardware procedure
wizard runs when the software is executed, allow it to install.
The board schematics are shown in Figure 11, Figure 12, and
Figure 13.
Users can provide their own power supplies using the J4 and J5
connectors, as shown in Figure 2.
The on-board filter is a third-order, passive low-pass filter. It
contains three capacitors (C13, C14, and C15) and two resistors
(R10 and R11). The footprint for R10 is located on the underside
of the board. The design parameters for the loop filter are for a
center frequency of 360 MHz, a PFD frequency of 1600 kHz, and a
low-pass filter bandwidth of 40 kHz. To design a filter for different
frequency setups, use the ADIsimPLL simulation software.
Note that only very high performance measurement equipment
is capable of measuring good jitter performance below 180 MHz.
The Agilent E5052A/E5052B and Rohde & Schwarz FSUP are
both good instruments for this purpose.
RF OUTPUT STAGE
The RF output stage of the board allows the user to insert a
tuned load for a particular frequency. The particular network
inserted in the board is optimized for 360 MHz operation. For
different frequencies, the output stage needs different component
values. Consult the ADF4360-9 data sheet for further information.
If in doubt, use a 50 Ω resistor instead of the shunt inductor and
a 100 pF bypass capacitor and 0 Ω resistor instead of the series
inductor.
08893-002
It is very important that the same components be placed on the
RFOUTA and RFOUTB lines. In addition, it is essential that both
outputs be terminated with 50 Ω loads. Otherwise, the output
power is not optimal, and, in some cases, the part may
malfunction.
Figure 2. Evaluation Board Silkscreen—Top View
The board is powered from a single 9 V battery or USB connection. All components necessary for local oscillator (LO) or
DIVOUT generation are available on board. A 19.2 MHz TCXO
from Fox Electronics provides the necessary reference input.
Otherwise, an external reference signal can be connected via J3
(to disable the TCXO, remove R3 and R4). The PLL is composed
of the ADF4360-9 and a passive loop filter. The VCO output
from RFOUTA is available through the standard SMA connector,
J1, and the complementary output RFOUTB VCO output is
available from J2. DIVOUT is available from J8. Digital lock
detect is present on the SMA marked J6.
In applications that only use the divider, both RF outputs are
best terminated with a shunt 50 Ω resistor to AVDD, a series
100 pF dc bypass capacitor, and a 50 Ω load to GND.
EXTERNAL INDUCTOR OPTIONS
The ADF4360-9 uses external inductors (L1 and L2) to set up
the LC tank circuit of the VCO. The evaluation board has a
footprint for the placement of these. A value of 22 nH is
inserted on the board giving a VCO center frequency of
360 MHz. Insert two 470 Ω resistors (R25 and R26) parallel to
ground for both L1 and L2 (see Figure 3).
Rev. C | Page 3 of 16
UG-106
Evaluation Board User Guide
To find the optimum frequency range for a given inductor, see
Figure 4. Ensure that the desired frequency is between the two
lines and determine the appropriate inductance needed.
450
400
FREQUENCY (MHz)
350
300
250
200
150
100
0
0
100
200
300
400
INDUCTANCE (nH)
500
600
08893-003
Figure 4. Output Center Frequency vs. External Inductor Value
Figure 3. External Inductors and Resistors for the ADF4360-9 Tank Circuit
Rev. C | Page 4 of 16
08893-004
50
Evaluation Board User Guide
UG-106
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
The control software and USB drivers for EV-ADF4360-9EB1Z
accompany the EV-ADF4360-9EB1Z on a CD.
To install the software, use the following steps:
1.
2.
4.
Open ADF4360_setup.msi.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
WINDOWS XP OS
Figure 6. Successful Installation
WINDOWS VISTA OS AND WINDOWS 7
(32-BIT) OS
After you have installed the software, install the USB drivers.
To do so, use the following steps:
Plug a USB cable into the USB connector on the evaluation
board. The Found New Hardware box opens. See Figure 5.
Choose Install from a list or specified location
(Advanced).
For Windows Vista or Windows 7 (32-bit), you must manually
install the drivers. To do so, use the following steps:
1.
Find the new unknown device (the evaluation board)
in Device Manager and double-click it to open the
properties. The device should be Unknown device,
under Other devices (see Figure 7).
08893-007
08893-005
2.
08893-006
The software requires Microsoft’s .NET Framework Version 2.0
or later to be installed on your machine. The installer automatically downloads the framework from the Microsoft website if you
do not have this installed. If you do not have an Internet connection or have a slow connection on the PC, you can install the
.NET framework directly from the CD. Do this by double-clicking
dotnetfx.exe. Once installed, run ADF4360_Setup.msi again.
1.
If the installation is successful, the message in Figure 6
appears.
Figure 5. New Hardware Wizard
3.
Click Continue Anyway when asked about Windows Logo
testing.
Rev. C | Page 5 of 16
Figure 7. Device Manager
UG-106
7.
Click Update Driver in the properties window (see
Figure 8).
If the installation is successful, the message in Figure 9
appears.
08893-009
2.
Evaluation Board User Guide
Figure 9. Successful Installation
WINDOWS 7 (64-BIT) OS
08893-008
Windows 7 64-bit uses a different driver than 32-bit systems. To
install this driver:
Figure 8. Unknown Device Properties
3.
4.
5.
6.
In the Update Driver Software dialog box, choose Browse
my computer for driver software.
Browse to C:\Program Files\Analog Devices\ADF4360.
Click OK or Next.
If prompted by Windows Security, choose Install this
driver software anyway.
1.
2.
3.
4.
Disconnect the USB evaluation board.
Open ADF4360_setup.msi.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
Connect your USB evaluation board. The driver should be
found automatically.
Note that installing this driver package disables older versions
of Analog Devices PLL software; therefore, only install if needed.
Rev. C | Page 6 of 16
Evaluation Board User Guide
UG-106
USING THE EVALUATION BOARD SOFTWARE
The control software for the EV-ADF4360-9EB1Z accompanies
the EV-ADF4360-9EB1Z on a CD. To install the software, see
the Evaluation Board Software Quick Start Procedures section.
To run the software, double-click the ADF4360.exe file on the
desktop or from the Start menu.
The main interface window opens (see Figure 10). Confirm that
Analog Devices RFG.L Eval Board connected is displayed at
the top of the window. Otherwise, the software has no connection
to the evaluation board.
The evaluation board can be connected and disconnected while
the software is running. Note that when connecting the board,
it takes about 5 seconds for the status label to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
Use the REF IN Frequency text box to set the correct reference
frequency and the reference frequency divider. The reference
TCXO on the evaluation board runs at 19.2 MHz.
The Settings section controls the charge pump current setting,
the output power setting, and the multiplexer output setting.
Use the Frequency Settings section to control the output
frequency. You can input the desired output frequency
in the RF Output Frequency text box (in megahertz). Div Out
Frequency displays the VCO output frequency available from
the output divider.
In the Registers tab, you can manually input the desired value
to be written to the registers.
In the Sweep and hop tab, you can make the device sweep a
range of frequencies or hop between two set frequencies.
In the Latches to write section at the bottom of the window, the
values to be written to each register are displayed. If the
background on the text box is green, the value displayed is
different from the value actually on the device. Click Write N
counter Latch or Write R counter Latch to write that value to
the device.
Press the F2, F3, and F4 keys to switch between the three tabs.
F12 increases the output frequency by one channel spacing and
writes it to the device. F11 decreases the output frequency by
one channel spacing.
Rev. C | Page 7 of 16
Evaluation Board User Guide
08893-010
UG-106
Figure 10. Software Main Interface Window
Rev. C | Page 8 of 16
Evaluation Board User Guide
UG-106
EVALUATION BOARD SCHEMATICS
08893-011
Figure 11. EV-ADF4360-9EB1Z Schematic
Rev. C | Page 9 of 16
UG-106
Evaluation Board User Guide
08893-012
Figure 12. EV-ADF4360-9EB1Z Schematic (Continued)
Rev. C | Page 10 of 16
Evaluation Board User Guide
UG-106
08893-013
Figure 13. EV-ADF4360-9EB1Z Schematic (Continued)
Rev. C | Page 11 of 16
UG-106
Evaluation Board User Guide
ORDERING INFORMATION
BILL OF MATERIALS
Table 1.
Reference Designator
C1, C3, C5, C29, C30, C32, C37, C38, C39, C40,
C41, C42, C43
C2, C4, C6, C8
C7
C9, C10, C27
C11, C12, C21, C24
Part Description
Capacitor, 0402, 0.1 µF, 16 V
Manufacturer/Part No.
Kemet C0402C104K4RAC
Capacitor, 0402, 10 pF, 50 V
Capacitor, Case A, 22 µF, 6.3 V
Capacitor, 0603, 1 nF, 50 V
Capacitor, 0402, 10 nF, 16 V
C13
2-pin capacitor, 180 pF, 0603, 50 V
C14
2-pin capacitor, 2.2 nF, 0603, 50 V
C15
2-pin capacitor, 82 pF, 0603, 50 V
C16
Multilayer ceramic capacitor, 50 V, X7R, 1 nF,
±10%, 0402
Capacitor, 0603, 100 pF, 50 V
Capacitor, 0603, 1 µF, 25 V
Capacitor, Case A, 1 µF, 16 V
Capacitor, Case A, 4.7 µF, 10 V
Capacitor, Case A, 10 µF, 6.3 V
Capacitor, 0805, 10 µF, 6.3 V
Capacitor, 0402, 22 pF, 50 V NPO
Capacitor 0402, 12 pF, 50V
LED, SMD red
Diode, 1 A, 50 V
Schottky diode, 20 V
Kemet C0402C100J5GACTU
AVX TAJA226K006R
AVX 06035A102JAT2A
Yageo (Phycomp)
CC0402ZRY5V7BB103
Yageo (Phycomp)
CC0603KRX7R9BB181
Yageo (Phycomp)
CC0603KRX7R9BB222
Yageo (Phycomp)
CC0603JRNP09BN820
Murata GRM155R71H102KA01D
C17, C19
C18, C28
C20, C23
C22, C25
C26
C31, C33
C34
C35, C36
D1
D2
D3
D4
D5
J1, J2
J3 to J6
J7
L1, L2
L3, L4
L5, L6
LK1, LK2
P1
R1 to R4, R9, R13, R22 to R24, R27, R36, R37, R40,
R41,R38
R5
R6, R15
R7, R8, R12, R28, R29, R30
R10
R11
R14, R16
R17 to R19
R20, R21
LED, SMD red
LED, SMD red
Jack SMA end launch tab
Jack SMA end launch tab (not inserted)
USB mini-B
Ceramic chip inductor, 220 nH, 5%, 0603 for
ADF4360-9 only
Resistor, 0603, 0 Ω
Ceramic chip inductor, 240 nH, 5%, 0603
Header, 1-row, 2-way and jumper socket black
Phycomp 2238 867 15101
Taiyo Yuden TMK107BJ105KA-T
AVX TAJA105K016R
AVX TPSA475K010R1400
Kemet T491A106M016AT
Murata GRM21BR71A106KE51L
Kemet C0402C220J5GACTU
Kemet C0402C120J5GACTU
Avago HSMS-C170
Multicomp 1N4001
Micro Commercial Components, Inc.,
SD103C-TP
Avago HSMS-C170
Avago HSMS-C170
Johnson Components 142-0701-851
Molex 56579-0576
Coilcraft 0603CS-22NX_LU
Battery clip, PCB mounting
Resistor, 0603, 0 Ω
Multicomp MC 0.063W 0603 0R
Coilcraft 0603LS-36NX_LU
Harwin Plc M20-9990245 and
Harwin Plc M7567-05
Keystone Electronics Corp. 593+594
Multicomp MC 0.063W 0603 0R
Resistor, 0603, 51 Ω
Resistor, 0603, 4.7 kΩ
Resistor, 0603, 10 kΩ
2-pin resistor, 12 kΩ, 0603, 1%
2-pin resistor, 5.1 kΩ, 0603, 1%
Resistor, 0603, 330 kΩ
Resistor, 0603, 330 Ω
Resistor, 0603, 2.2 kΩ
Multicomp MC 0.063W 0603 1% 51R
Multicomp MC 0.063W 0603 1% 4K7
Multicomp MC 0.063W 0603 1% 10K
Multicomp MC 0.063W 0603 1% 8K2
Multicomp MC 0.063W 0603 1% 3K9
Multicomp MC 0.063W 0603 1% 330K
Multicomp MC 0.063W 0603 1% 330R
Multicomp MC 0.063W 0603 1% 2K2
Rev. C | Page 12 of 16
Evaluation Board User Guide
Reference Designator
R25, R26
R31, R32
R34
R35
SW1
T1 to T8, T13 to T16
T9 to T12
U1
U2, U3
U4
U5
U6
U7
Y1
Y2
UG-106
Part Description
Resistor, 0402, 470 Ω
Resistor, 0603, 100 kΩ
Resistor, 0603, 140 kΩ
Resistor, 0603, 78.7 kΩ
Switch, PCB SPDT
Terminal, PCB, red, PK100
Test point (not inserted)
Integrated integer-N synthesizer
High accuracy low dropout linear 3 V
regulator
ADP3334 adjustable LDO regulator
IC serial EEPROM 8-SOIC
USB microcontroller
ADCMP602 comparator
19.2 MHz TCXO (FOX801)
24 MHz XTAL
Manufacturer/Part No.
Multicomp MC 0.063W 0402 1% 470R
Multicomp MC 0.063W 0603 1% 100K
Multicomp MC 0.063W 0603 1% 140K
Multicomp MC 0.063W 0603 1% 78K7
APEM TL36P0050
Vero Technologies, Ltd. 20-313137
Analog Devices ADF4360-9BCPZ
Analog Devices ADP3300ARTZ-3
Analog Devices ADP3334ARMZ
Microchip 24LC64-ISN
Cypress CY7C68013A-56LFXC
Not inserted
Fox Electronics FOX801-BELF
ECS ECS-240-12-20A-TR
RELATED LINKS
Resource
ADF4360-9
ADP3300
ADP3334
ADCMP602
Description
Product Page, Clock Generator PLL with Integrated VCO
Product Page, High Accuracy anyCAP® 50 mA Low Dropout Linear Regulator
Product Page, High Accuracy Low IQ, 500 mA anyCAP® Adjustable Low Dropout Regulator
Product Page, Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator in 8-Lead MSOP and LSCFP
Packages
Rev. C | Page 13 of 16
UG-106
Evaluation Board User Guide
NOTES
Rev. C | Page 14 of 16
Evaluation Board User Guide
UG-106
NOTES
Rev. C | Page 15 of 16
UG-106
Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2008–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG08893-0-2/12(C)
Rev. C | Page 16 of 16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement