Top Mount Refrigerator
Top Mount Refrigerator
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
A4TCNWFB
A8TCNWFA
B
Electrical: A 115-volt, 60-Hz, AConly, 15- or 20-amp fused, grounded
electrical supply is required. It is
recommended that a separate circuit
serving only your refrigerator be
provided. Use an outlet that cannot be
turned off by a switch. Do not use an
extension cord.
Water: A cold water supply with
water pressure between 30 and
120 psi (207 and 827 kPa) is required
to operate ice maker and water
dispenser. If you have questions about
your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the
water coming out of a reverse
osmosis system going to the water
inlet valve of the refrigerator needs to
be between 30 and 120 psi (207 and
827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration
system is connected to your cold
water supply, the water pressure to
the reverse osmosis system needs to
be a minimum of 40 to 60 psi (276 to
414 kPa).
A
C
E
overall
D
F
top of
cabinet
90˚
Model
Number
Depth
“A”
Cubic Ft.
A4TCNWFB
14.4
29³⁄₄"
(75.6 cm)
28"
(71.1 cm)
A8TCNWFA
17.6
311⁄8"
(79.1 cm)
28"
(71.1 cm)
Cab. Height
“D”
Overall
Height
“E”
Depth Door
Open 90°
“F”
28"
(71.1 cm)
621⁄8"
(157.8 cm)
62³⁄₄"
(159.4 cm)
57"
(144.8 cm)
28"
(71.1 cm)
67 3⁄8"
(171.0 cm)
67 7⁄8"
(172.4 cm)
57"
(144.8 cm)
Cab. Width Door Width
“B”
“C”
LOCATION REQUIREMENTS
3 " (7.5 cm)
To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on
each side. Allow 3" (7.5 cm) of space between overhead cabinets and refrigerator
top. Allow at least 1" (25.40 mm) between back of cabinet and the wall. If your
refrigerator has an ice maker, make sure you leave some extra space at the back for
the water line connections.
12
/ " (1.25 cm)
If you are installing your refrigerator next to a fixed wall, leave 2" (5.08 cm)
minimum on the hinge side (depending on your model) to allow for the door to
swing open.
NOTE: It is recommended that you do not install the refrigerator near an oven,
radiator, or other heat source, nor in a location where the temperature will fall below
55°F (13°C).
2" (5.08 cm)
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10214129A
1/31/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising