International Kayak 2016 August 87367033 HvVATny

International Kayak 2016 August 87367033 HvVATny
MARCH 2016
KAYAKING PARTS & ACCESSORIES
RECREATION & FISHING
SEPTEMBER 2016
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
CONTENTS
ITEM
PAGE
LIFE VESTS / PFD
PET PFD / WATER WEAR / SAFETY
MIRAGEDRIVE® ACCESSORIES
SAIL KITS / GLOVES
ISLAND SPINNAKER / TRAMPOLINES
SIDEKICK / DODGERS / MISC
HATCH LINERS / HATCHES / BAGS
2-3
4-5
6-7
8-9
10-11
12-13
14-15
KAYAK CARTS
KAYAK DOLIES / TRAILERS
RACK PADS / STRAPS
RHINO RACK LOAD ACCESSORIES
COVERS / RIGGING STANDS
16-17
18-19
20
21
22-23
EVOLVE / TROLLING MOTORS
LIVEWELLS
H-BAR / H-CRATE / H-RAIL KITS
H-RAIL ACCESSORIES & ROD HOLDERS
RAM ROD HOLDERS / MOUNTS
RAILBLAZA MOUNTS / ACCESSORIES
SCOTTY ROD HOLDERS / MOUNTS / HUNTING
YAKATTACK ACCESSORIES
HOBIE ACCESSORIES AND PACKAGES
STAKE OUT POLE / DRIFT CHUTE / ANCHOR KIT
POWER-POLE
FISHFINDERS / MOUNTS / INSTALL KITS
24-25
26-27
28-29
30-31
32-33
34-35
36-37
38
39
40
41
42-43
FUGOO / HATS
MAINTENANCE / MISC ACCESSORIES
HARDWARE / LINE / TOOLS
44-45
46-47
48-49
KAYAK SUPPORT
KAYAK FAQ
PARTS WARRANTY INFO
LIVEWELL PARTS
PARTS DIAGRAMS
NUMERICAL PARTS LIST
51
51
51
51
52-66
67-73
Note: Freight to dealers is not included in pricing.
No portion of this catalog may be reproduced without the express
permission of the Hobie Cat Company.
All rights reserved. ©2015 Hobie Cat Company. Oceanside, CA 92056
Printed in USA
HOBIEKAYAKS.COM
LIFE VESTS / PFD
LIFE VESTS
& PFDs
HOBIE THIN-BACK
by Stohlquist
Features a thin foam back design ... perfect for use with Hobie Vantage
seats. This thinner back profile provides more mobility and comfort,
while reducing interference with taller seat backs.
S6100xx (xx = size) MANGO
FEATURES:
Thin back design works with all seat styles; Graded Sizing provides the best
possible fit; Open sides for ventilation; Cross-chest cinch harness for zero ride-up;
Mesh shoulders & interior panels for maximum ventilation; Adjustable shoulders,
and dual forward pulls for a custom fit; Zippered front pockets offer organization;
Built-in beverage holder and neoprene sunglasses sleeve; Entry grip tab at zipper
base; #10 YKK zipper with non-corroding slider; Lightweight PE Foam; Type III PFD
with sea level buoyancy: MD: 16 lbs, 8oz / LG: 17 lbs / XL: 17 lbs, 8oz
CONSTRUCTION:
• Mini Ripstop nylon outer shell
• 200 denier oxford liner
• USCG approved
SIZING:
MEN’S
WOMEN’S
SIZECHEST
SIZECHEST
MD
30” - 40”
SM
28” - 34”
LG
40” - 46”
MD
34” - 40”
XL
46” - 52”
LG
40” - 46”
S6101xx (xx = size) RED
S6102xx (xx = size) GREEN
S6114xx (xx = size) WOMEN’S BLUE
S6110xx (xx = size) WOMEN’S MANGO
GRADED PFD SIZING
Fine tuned for each individual size,
and sculpted foam footprint and
foam thickness to provide a better
fitting, and more comfortable PFD for
people of all sizes.
2
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
LIFE VESTS / SAFETY
HOBIE MIRAGE PFD
This PFD was designed for Vantage high back seats on Hobie Mirage
Kayaks. The flotation in the back is thin for more comfort while seated
and helps to prevent the vest from riding up as you pedal. A vent
along the spine adds to the comfort. Front zip entry for easy on and
off. Large pockets on the front for easy storage and access of small
items. High waistline cut so the vest does not ride-up while pedaling.
Huge arm cutouts and the short waist allow excellent freedom of
movement. Adjustable side straps offer enough size variation for many
layers underneath or none! Reflective tapes for visibility during low light
conditions. Back logos vary between “H” and Penguin Logo.
S6800xxx HOBIE MIRAGE PFD GRAY/BLACK (xxx = SMD - MLG - LXL)
(UL - Approved) for use in USA Only
S6800xxx PFD MIRAGE GRAY
HOBIE INFLATABLE PFD
Light weight and comfortable. Ready when you need it, manual CO2
inflation or buy mouth inflator allows for swimming, wading and
intentional immersion. Available in Mango, Tan/Gray or Red/Gray.
S6779MG MANGO
S6779TG TAN / GRAY
S6779RG RED / GRAY
S6779R PFD INFLATABLE REARM KIT
NOTE: AIR SHIPPING RESTRICTIONS CO2 / DANGEROUS GOODS
FEATURES:
Buoyancy: 26 Pounds; Inflator Type: Halkey Roberts 3F; Primary Inflation: MANUAL;
Auxiliary Inflation: Oral; Size and U.S.C.G. Wearer Requirements; Adult Universal: For
persons 16 years or older, weighing more than 80 lbs., with chest size of 30 - 52 inches;
U.S.C.G. Approval Type: U.S.C.G. Type III; Durable Ripstop Nylon Front ShelL; Waist Belt
Width: 1”; Zippered External Pocket; Reflective Strips; Sunglass Hanging Loop
SIZING
SIZECHEST
SMD
33” - 39”
LXL
40” - 46”
XXL
48” - 54”
HOBIE EDGE by Stohlquist
An innovative, high mobility, low profile boating vest for kayaking, SUP,
and wetsailing.
S6120xxx (xxx = size)
FEATURES:
Ergonomic WRAPTURE™ shaped torso; Adjustable shoulders, 4 side pulls, and
front waist buckle closure; Low cut, offset front-zip entry; Large arm openings
for unrestricted whitewater and SUP paddling; Contoured padded shoulder
straps; High visibility 3M™ reflective accents; Roomy, top loading front pocket
for secure storage and easy accessibility; Mesh sides for maximum ventilation;
Mini-Ripstop nylon shell & 200 denier oxford liner; Type III PFD with sea level
buoyancy listed: SMD: 15 lbs, 8oz / LXL: 16 lbs, 8oz / XXL: 17 lbs, 8oz
CONSTRUCTION:
• Mini Ripstop nylon outer shell
• 200 denier oxford liner
• USCG approved
SAFETY TIP
LIFE VESTS: Get a good, comfortable life vest and WEAR IT! A life vest does you
little good stored on your boat, especially if you get tossed into the water and
away from your boat. Accidents happen and by their nature, they happen when
you are not prepared. A life vest can keep you afloat until you can rescue yourself
or you can be rescued by others. In the worst cases when injuries or cold water
are involved, your life vest can make all the difference! Be sure everyone onboard
your boat wears a life vest too! Pass the word! Federal law now requires that all
persons below the age of 13 must wear a life jacket while aboard a boat.
HOBIEKAYAKS.COM
HOBIE INFLATABLE BELT PACK PFD
Belt carried PFD design is cooler and more comfortable than typical
PFDs. Functional design for multiple types of water sports from fishing,
kayaking, sailing to stand up paddling (SUP). Buoyancy: 26 Pounds.
USCG Approved Type III PFD, approved for use by persons 80 lbs and
16 years of age or older. Size: Universal Adult Size. Durable ripstop
nylon pack. 2" wide, adjustable, nylon waist belt. Includes (1) CO2
Cylinder and instructions.
S6780RG RED/GRAY
HOBIE INFANT/CHILD/
YOUTH VESTS
These are easy to adjust for different
small sized crews. (Mango)
S6770IMG <30 lbs
S6770CMG 30 to 50 lbs
S6770YMG 50 to 90 lbs
3
PET PFD / HOBIE WATER WEAR
HOBIE PET PFDS
You can now take your best friend with you safely and in Hobie Style!
Added flotation as a swim assist and grab handles, so you can help
them back aboard more easily. Adjustable fit, leash attachment, side
pockets, grab handles and soft foam undercarriage support. Happy
days for dogs!
FEATURES:
Tri segmented soft foam design; Foam supported Ripstop-nylon collar; Dual cargo
pockets (S, M, L, XL); Dual integrated grab handle design (M, L, XL); Soft foam
undercarriage support chasis; Integrated leash attachment
S9000XS PET PFD XS MANGO <12#
S9000SM PET PFD SM MANGO 12-24#
S9000MDPET PFD MD MANGO 24-60#
S9000LG PET PFD LG MANGO 60-90#
S9000XL PET PFD XL MANGO >90#
SIZING:
SIZE
WEIGHT
COLLAR
XS
12 lbs.
8” - 12”
BODY GIRTH
13” - 17”
S
12 - 24 lbs.
10” - 14”
15” - 21”
M
24 - 60 lbs.
13” - 19”
18” - 30”
L
60 - 90 lbs.
18” - 26”
24” - 36”
XL
90 - 120 lbs.
22” - 30”
30” - 42”
HOBIE WATER WEAR
Be more comfortable and extend your kayaking / sailing season by dressing appropriately for the
conditions. Hobie water wear is designed for both kayaking and sailing needs.
HOBIE SPORT TEE
Designed for active watersports. Quickdry 100% polyester mesh
(Polyester yarn with wicking dry and anti-bacteria function) UPF50+ Mix
and match layers to get the comfort you desire. Men’s available in long
or short sleeve. Women’s version has a V-Neck.
HOBIE SPORT TEE MEN’S LONG SLEEVE
3857SM / 3857MD / 3857LG / 3857XL
HOBIE SPORT TEE MEN’S SHORT SLEEVE
3858SM / 3858LG / 3858XL
HOBIE SPORT TEE WOMEN’S SHORT SLEEVE V-NECK
3859SM / 3859LG / 3859XL
4
HOBIE SPRAY TOP
Designed for active kayaking and sailing. Can be worn with swim trunks
or over a wetsuit. Mix and match layers to get the comfort you desire.
Spray and wind protection. Beautiful styling and extra durable construction. Construction Features: Neck and wrist seals, Neoprene waist
seal, Breathable 5000cm3 nylon shell, Offset chest pocket, Arm patch
pocket. Colors may vary.
HOBIE SPRAY TOP
3850SM / 3850MD / 3850LG / 3850XL
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
SAFETY
THE VISICARBON PRO™
HOBIE SAFETY KIT This kit has many useful items for added safety when
boating. Hobie Gear Bucket with Orange safety lid.
Ready access is assured by hanging
the safety kit on the inside lip of
an 8" Hobie Twist and Seal hatch.
Includes a 33 piece first aid kit, water
proof flash light, signal mirror, space
blanket, whistle, utility tool, waterproof
matches, duct tape, gauze bandage,
gauze pads, cloth tape (specific items
subject to change).
72020010 HOBIE SAFETY KIT
HOBIE FIRST AID KIT
The Visicarbon Pro combines a high visibility light and safety flag with a
light weight, low drag, and portable style. Insert foam base into moldedin or Live Well rod holders or flag attachment system provides a secure
attachment that allows the flag to be removed in seconds. Features:
Main mast section designed with carbon fiber tubing for high strength
and ultra light weight. The VISICarbon Pro™ weighs in at just 14 ounces,
complete with 3 AA batteries. The 48” long VISICarbon Pro™ breaks down
to 14” long in seconds. The folded unit can be stored inside the nylon flag
which doubles as carry bag.
72020040 SAFETY FLAG/LIGHT COMBO
Waterproof 3600 Plano box with essential
first aid items. Fits tackle management rack.
72020078 HOBIE FIRST AID KIT
(Suggested Mount 72020051 MightyMount See more Yakattack mount options)
HYDROSTAR – SOS DELUXE
Everything you need for lighting in one compact
waterproof package.
72020003 HYDRO STAR SOS LIGHT
FEATURES:
5 light settings; Magnetic base; Suction cup base; Lanyard clip;
Integrated safety whistle; Submersible to 50ft
SPECS / FUNCTION:
Dimensions: 6in H x 1.25in DIA
1 CLICK : 3 LED Light (10LM)
2 CLICKS : 3 LED Strobe (15LM)
3 CLICKS : 360˚ Deck Light (Red:6LM/Green 2LM)
4 CLICKS : Emergency 1 Watt LED Strobe (65LM)
5 SECOND HOLD : SOS Signal (65LM)”
SAFETY FLAG
Be Seen! When out on your kayak, you are
very low to the water. The 4' tall safety flag will
help other boaters see you. Very important in
areas with mixed boating traffic! For mounting
in areas with internal access, you can use large
washers and the provided nuts for mounting.
Otherwise, in areas with no internal access, use
the mount which includes bolts and well nuts.
72020002 SAFETY FLAG 4'
72020012 DELUXE MOUNT
SAFETY WHISTLE
A whistle can save your life! Keep one attached to
your PFD in case of overboard emergency. Alert
approaching vessles. Alert other boaters or people
ashore that you need help.
MK0053 SAFETY WHISTLE
BILGE - HAND PUMP
This light weight bilge pump is extra security for long trips on the
water. Features super-comfortable, easy-grip rubber over-molded
handle and a high-visibility neon yellow stock for extra safety.
72020032 BILGE - HAND PUMP
TELESCOPING PADDLE
Measures just 20" in closed position (45" when fully extended).
Lightweight, anodized aluminum shaft corrosion resistant design.
Floats too! 6 1/2” wide blade will fit into an 8” hatch opening.
3091 TELESCOPING PADDLE
SAFETY PACKAGES
72020026 KAYAK SAFETY PACKAGE
172020010 Hobie Safety Kit
172020002 Safety Flag
172020003 Hydrostar Light
72020029 DELUXE KAYAK SAFETY PACKAGE
172020010Hobie Safety Kit
172020040Visicarbon Safety Flag / Light
172020032Bilge Pump
HOBIEKAYAKS.COM
RESCUE STEP
“How do I get back in if I fall out?” The RescueStep features quick and
easy installation and operation for vessel re-entry assistance, righting an
overturned kayak and can also be used to tow or portage your kayak. Its
compact size makes it easy to bring along anywhere you need it.
72020092 RESCUE STEP KAYAK
1266
RESCUE STEP BOAT
5
MIRAGEDRIVE®
MIRAGEDRIVE
Hobie
MirageDrive GT
shown
HOBIE MIRAGEDRIVE “GLIDE
TECHNOLOGY”
80010501 MIRAGE DRIVE GT - ST FINS
80013501 MIRAGE DRIVE GTi - ST FINS iSeries
80012501 MIRAGE DRIVE GTT - ST TURBO FINS
HOBIE MULTI-LUBE
A planet-safe lubricant recommended for lubricating
MirageDrives and many other uses. Environmentally
friendly for in-the-water applications. Hobie Multi-Lube
offers excellent lubrication, is an anti corrosive coating,
great for cleaning and many other uses... use on nearly
anything that squeaks, rusts, corrodes or binds up;
MirageDrives, rudder drums, cams, fishing reels and
more. The 1 oz size is perfect for getting the lubricant
into tight spaces by using the needle applicator. The
4 oz size has a spray applicator for coating chains and
larger surfaces, shafts and bulky parts. Every Hobie
owner should have Hobie Multi-Lube. Be nice to our
planet, keep MirageDrives and other components
running smoothly and lasting longer without polluting
our waterways. Use it for all shop, home and sport
lubrication needs.
5120HOBIE MULTI LUBE 1 OZ
5121HOBIE MULTI LUBE 4 OZ
DRIVE WELL SEAL
PEDAL PAD KIT
Softer on your feet! Neoprene pads are self adhesive and stick right to
your pedals. Stock on Drives built in 2010+
72020034 PEDAL PAD KIT BLACK (PAIR)
6
For older version MirageDrives (pre-2013). Keeps the seat area drier.
Kit includes one seal and two attachment "zip ties".
81037001 WELL SEAL
81038001 i - WELL SEAL
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
MIRAGEDRIVE
MIRAGEDRIVE STOW BAG
This heavy duty Cordura and mesh bag fits the complete MirageDrive
with standard fins or the ST Turbo length. There is extra space in the
bag for things like a life vest or drive well plug. Also includes "D" ring
fittings to allow attachment to Inflatable rolling bags. Large enough to
store your Inflatable's drive, pump and 4 piece paddle.
80024 MIRAGEDRIVE BAG
LEASH KIT - MIRAGEDRIVE
Protect your investment from an accidental drop overboard. Includes
hardware for attachment to the hull.
74052101 LEASH KIT - MIRAGEDRIVE
PERFORMANCE FINS - ST OR ST TURBO!
Increase your performance or increase your fitness routine, you choose the
fin that is right for you: Standard, ST or ST Turbo... low, medium or a higher
gear! The standard fins, supplied with our kayaks prior to 2015, are the
easiest pedaling fins, but some users feel that the standard fins do not offer
enough resistance. ST became standard equipment in 2015 models. This is
very evident when using a sailing kit. The added power and speed of the sail
often outpaces the standard or even ST fins (similar to pedaling a bike down
hill in first gear).
Want to go really fast? Add ST TURBOs. Hobie Mirage kayak users report as
much as 10% increase in speed and more using ST TURBO Fins. But its not
all about speed, you can get top end speed and a slower cadence for cruising
(Less pedals per mile). All achieved with these larger and more efficient fin
designs. These longer fins can also increase lateral resistance for sailing
upwind.
The ST (Square Tip) designs will require a bit more effort to pedal. The
added effort is commonly compared to pedaling a bike up a slight incline. In
addition, the included fin tension screw allows adjustment to achieve lower
end torque or top end speed to meet the desires of the pedaler.
ST TURBO FINS & KITS
Kits come with 2 fins & 2 longer masts (available for V1 or V2 drives)
72066001 ST TURBO FIN KIT V2/GT - GRY/BLK (Threaded Sprocket)
72066021 ST TURBO FIN KIT V2/GT - RED/BLK (Threaded Sprocket)
72066031 ST TURBO FIN KIT V2/GT - BLU/BLK (Threaded Sprocket)
72065
ST TURBO FIN KIT (Older SS & Set-screw Sprocket)
ST FIN
GRY/BLK
81192001 ST TURBO FIN - GRY/BLK Single (replacement)
81192021 ST TURBO FIN - RED/BLK Single (replacement)
81192031 ST TURBO FIN - BLU/BLK Single (replacement)
ST FINS fit any Standard Hobie MirageDrive
81193001 ST FIN / SINGLE - GRY/BLK Single (replacement)
81193021 ST FIN / SINGLE - RED/BLK Single (replacement)
81193031 ST FIN / SINGLE - BLU/BLK Single (replacement)
ST TURBO FIN
BLU/BLK
ST TURBO
V2/GT RED FIN KIT
MIRAGEDRIVE SPARE PARTS KITS V2 / GT
Spare parts kits include a fin, mast, sprocket, chain and appropriate parts for the drive version. V2
drives use threaded sprockets and masts. GT has roller bearings. All in a handy zippered pouch.
Available for the Comfort / ST fin length masts or drives with ST Turbo fins. Comfort fin kit shown.
80010301 V2 COMFORT (Threaded Sprocket) 80010401 GT ST BLUE (Threaded/Bearing Sprocket)
80013301 V2 TURBO GRAY (Threaded Sprocket) 80013401 GT TURBO BLUE (Threaded/Bearing Sprocket)
HOBIEKAYAKS.COM
80010301
7
SAILING
MIRAGE SAIL KIT
ADD SAILING TO YOUR HOBIE
MIRAGE KAYAK EXPERIENCE!
84515001
i-Series 79052203
84516001
i-Series 79052204
84514001
84513001
i-Series 79052202
MIRAGE KAYAK SAIL KIT
Add sail power to Hobie Mirage Kayaks! (Fits all current models of
Hobie Mirage Kayaks). Sail with ease maintaining excellent speed
with or without pedaling while sailing. Easily pedal out to sail or pedal
home when the wind is too light. Add a SideKick ama kit for additional
stability if desired. The MirageDrive pedal system’s fins act as a keel or
centerboard when in the down position offering the lateral resistance
needed for upwind sailing.
SAIL KIT INCLUDES:
Mast*, sail (20.25 sq ft.), lines, fittings and storage bag.
(*2 Piece mast standard / 4 Piece mast for i-Series)
ROLLER FURLING KIT
This is the ultimate for easy operation of a Hobie Mirage sail kit. Start
with the sail rolled around the mast. When you are ready... un-furl
to expose the sail or leave a little rolled on the mast to test the wind!
By partially unrolling the sail, you are “reefing” some of the sail for
better control and stability. If you are ready for full power... roll it all
out! Heading back to the beach? Roll the sail up tight on the mast and
beach or dock the kayak with ease. Fits any Hobie Mirage sail kit (not for
i-Series kayaks due to their stayed rig). The rolled sail will fit in current
full-length sail bags. Hardware is easy to install and removal of the sail
and control lines is simple for storage.
84517001 ROLLER FURLING KIT
Add the large rudder #81397001 for more responsive rudder control. Adventure /
Revolution 16 models can add the dagger board for enhanced upwind performance.
84513001 SAIL KIT (Turq/Papaya)
84514001 SAIL KIT (White/Red)
84515001 SAIL KIT (White/Turq)
84516001 SAIL KIT (Silver/White)
79052202 i-SERIES SAIL KIT (Turq/Papaya)
79052203 i-SERIES SAIL KIT (White/Turq)
79052204 i-SERIES SAIL KIT (Silver/White)
8
SAIL KIT SPARE PARTS
84503
REPLACEMENT 2-PIECE MAST
79052251 REPLACE 4-PIECE (i-SERIES) MAST
84511
REPLACEMENT SAIL BATTEN W/CAP
84509001 REPLACEMENT BATTEN CAP
RH112WHTBATTEN TIE LINE (PER FOOT)
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
SAILING ACCESSORIES
LARGE TWIST AND
STOW "SAILING"
RUDDERS
ADVENTURE / REVO 16
DAGGERBOARD
HOBIE GLOVES
81397001
Protect your hands while increasing your grip strength. Gloves add grip
strength on lines which can ease up on the amount of force you need to
exert. Available in small, medium, large & extra-large. (xx = size)
3188xx HOBIE GLOVE
81397101 for use
on i-Series, Quest
RUDDERS
81397001 LG RUDDER BLADE
81397101 LG RUDDER BLADE/QUEST i-Series
79502001 DAGGERBOARD
AIR-FLOW TELS
Trim your sails for optimum performance. Attached air flow over sails is
critical. Air flow directions are indicated by these tell tails. Made of light
weight rip stop nylon (Red / Green). Attaches to sails with waterproof
adhesive disks.
334 SET OF 14
RONSTAN GLOVES
Double thickness palm and fingers for protection and grip. Mesh panels
for flexibility, comfort and quick drying. Low cut neoprene wrist band.
Sticky gloves reduce fatigue by minimizing the physical effort required
to hold ropes. (xx = size XS/SM/MD/LG/XL)
RF4851xx Three Finger Glove
RF4850xx Short Finger Glove
SAILING TIP!
ISLAND HIKING STICK
Extend your reach to your steering. Allows you to move your weight
(hiking) outboard onto tramps or hakas for better stability, speed and
comfort. Fits 2011+ Mirage model steering handles and all Tandem Islands.
72020063 HIKING STICK - AI/TI
HOBIEKAYAKS.COM
SAIL POWER: Watch the sail, pay close attention to the trim or adjustment of
the sail. When the front of the sail, just behind the mast, luffs or flutters in the
breeze, you lose power. To start moving, pull the sail in just enough to stop the
sail from luffing or turn the boat away from the direction the wind is coming
from. There are also short ribbons hanging on either side of the sail called "tell
tails". The tell tails react to air flowing over the sail and will help you see that the
sail is pulled in too tight or too loosely. If you pull the sail too tight you will stall
the sail power. The tell tail on the back side of the sail will drop or do circles.
Ease the sail out until it luffs, then pull it in just a little until it stops luffing. You
will adjust the trim whenever the wind changes direction or you change course.
9
ISLAND SPINNAKERS / MAST HEAD WIND VANE
HOBIE ISLAND MAST HEAD
WIND DIRECTION VANE
The mast head wind vane will help you keep your
Island on the best angle to the wind for better
sailing. Helps you understand shifts in wind
direction so you can adjust course or sail settings.
Achieve the most performance and optimal course.
Up on the mast head is the least disturbed wind
flow, so the optimal location for a wind diection
vane. As you sail, wind directions are not typically
consistant. As the wind changes direction or
ocillates, you need to adjust heading and or sail
trim for best performance. Use the vane for rough
adjustments and the wind tell tails on the sail for
fine adjustments. This wind vane is designed for
all Hobie Islands when not using a spinnaker kit.
Simply slips over the mast head and tightens in
place with a thumb screw.
72020356 MAST HEAD VANE
HOBIE ISLAND SPINNAKER/REACHER KIT
Add performance when reaching or running to your Hobie Island. Off-the-wind sailing is typically the
slowest point of sail, add a spinnaker and the Island comes alive! The Hobie spinnaker kit includes a
snuffer launching and retrieving bag which makes handling the spinnaker as easy as can be. Simply
pull on the halyard line to launch, set the sheet and off you go! To lower, ease off the halyard
and pull on the retrieval line. The spinnaker drops and stows directly into the snuffer system.
The kit includes a mast head wind direction vane for use while rigged for the spinnaker. The
mast head wind direction vane will help you keep the Island on course for spinnaker sailing.
Spinnakers are for broad reaching across the wind to directly sailing down wind. They are
not for sailing higher angles than a reach across the wind.
Note: Spinnaker sailing can be challenging and may not be for the novice sailor. We strongly
suggest learning to sail your spinnaker in light winds. Once you learn how to handle a
spinnaker... You are going to LOVE IT! Spinnakers add a whole new dimension to your
sailing experience.
72020350 SPINNAKER KIT ADVENTURE ISLAND (57 sq ft / 5.30 m2)
72020351 SPINNAKER KIT TANDEM ISLAND (73 sq ft / 6.78 m2)
10
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ISLAND TRAMPOLINES
HOBIE MIRAGE ISLAND TRAMPOLINES
Added space for carrying gear, allows you to move weight outboard for
better performance in windy conditions, comfortable sitting or laying
down position, carry additional crew / kids / pets (does not increase basic
weight capacity), reduce spray in cockpit. The trampolines are made from
mesh vinyl as used on our catamaran product. Available in Gray or Black.
Easy installation. Fast (side-release) buckles across aft aka make folding
akas quick. Adjustable webbing straps for a tight fit. Rolls down and straps
to forward aka for storage or easily slips off the aka. Paddle storage, gear
pockets and lanyard grommets included. (200 Lb Capacity)
88527001 TRAMP SET AI / TI* – BLACK
88527011 TRAMP SET AI / TI* – GRAY
*Fits all TI and 2015+ AI (54 3/4” Length)
79527001 TRAMP SET 2014-OLDER AI – BLACK
79527011 TRAMP SET 2014-OLDER AI – GRAY
Fits older AI (57 1/4” Length)
HALF TRAMPS AND PARTS
88527201 TRAMP LEFT SIDE AI / TI* – BLACK
88527301 TRAMP RIGHT SIDE AI / TI* – BLACK
79527101 LACING ROD
79527201 WEB/BUCKLE ASSY
HOBIEKAYAKS.COM
11
SIDEKICK
SIDEKICK AMA KIT
Great added stability for use when sailing, fishing, standing when site fishing, diving or
shooting photos! SideKick ama kit is simple, light weight and effective! Floats are inflatable.
The SideKick’s cross arms adjust the float height with a simple “click-twist-click”. Just like a
paddle shaft adjustment. Three positions offer you high - medium - low positions. Set the
floats high for cruising (less drag) or secondary stability. Use the medium or low settings for
primary stability (less initial roll). Fine adjustments for float height are done by twisting the
main crossbar within its mounts and tensioning with the fastening hardware.
Set up and use right off the beach or disassemble and deflate to store inside the hull. Then
assemble and inflate when you get to your dive or fishing spot. Inflation is simple. Just blow
a few breaths into each float through their one-way valves. Valve cap unscrews for rapid
deflation. Installs with 4 bolts using expanding nuts. Not for use on Pro Angler models.
72062101 SIDEKICK AMA COMPLETE KIT - Light Gray
72063101 SIDEKICK AMA COMPLETE KIT - Dark Green
72062061 SIDEKICK +07 ADVENTURE MOUNTING ADAP PLATE SET
(Adapts Island crossbar attachment point to SideKick mount spacing)
72062062 SIDEKICK - MOUNT KIT W/CENTER BAR (For second hull installation. Crossbar and mount hardware only)
12
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
DODGERS / ACCESSORIES
HOBIE DODGER
The Hobie Dodger is a spray, cool breeze or sun shade for your lower body.
Deflect bow spray, block cool breezes and stay warmer in cold conditions.
Works like a small pop-up tent. Loops of bungee connect to the boat via
small fittings installed along the rails. The entire dodger folds forward
to enter or exit the kayak, to make pedal adjustments or reach items in
the cockpit. An access panel is built-in for using the sailing rig. A great
combination when there is wind and spray!
Great for hunters, animal and bird watchers as the Dodger conceals your
legs movement. The Hobie Dodger makes your kayak a sit-inside sit-on-top!
Installs in minutes initially, but installs in moments once the fasteners are in
place. Packs away into a small stow bag 5” round by 24” long (1.8 lbs).
Mirage Dodger Fits the Hobie Mirage Outback, Sport, Adventure and
Revolution kayaks (May fit other models with some modification to
hardware placement).
HOBIE MIRAGE DODGER
72721001 DODGER SILVER
72722001 DODGER RED
HOBIE ISLAND DODGER
72730002 ISLAND DODGER SILVER
72730004 ISLAND DODGER RED
Tandem Island: Island Dodger forward / Mirage Dodger aft
Includes knob,
attachment bolt
and cap
MIRAGE SEAT PAD
INFLATABLE “I-COMFORT”
Replaces the older style standard foam seat pad for the Hobie Mirage.
Adjust the cushion by adding or releasing air pressure. Not designed
for use on Hobie Mirage Inflatable kayaks. Can be used in combination
(stacked) on a seat cushion.
72020028 MIRAGE SEAT PAD – INFLATABLE “i-Comfort”
STEERING KNOB ASSY
More comfortable hand position - better leverage. Fits all 2011+ Mirage
model steering handles and all Tandem Islands. Kit includes attachment
screw, knob and cap.
88991355 KNOB ASSY
74050001
PADDLE “T” HANDLE
Convert your kayak paddle to a canoe style paddle. Easier to store
on many models of Hobie Mirage kayaks where paddle use is
unnecessary while using the MirageDrive. Plugs into the female half
of the kayak paddle.
74049001 PADDLE “T” HANDLE
HOBIEKAYAKS.COM
74051001
PADDLE LEASH
Secure a paddle to your boats bow eye. Keep the paddle with the boat
after a capsize. By holding the paddle after a capsize you can also be sure
that the boat stays with you and cannot drift away. Web paddle leash
is made from hollow webbing and an internal shock cord. Coil leash is
elastic plastic coil.
74050001 PADDLE LEASH - WEB 4.5’
74051001 PADDLE LEASH - COIL 13
HATCH LINERS / GEAR BUCKETS /
STORAGE TRAYS
OUTBACK
HOBIE GEAR BUCKET
REVOLUTION
HOBIE
HATCH LINERS
Add a drop-in "tackle box" to your 8" Hobie Twist and Seal hatch. The
Gear Bucket containers are 2 1/2" deep and hang on the hatch lip or can
be slipped down into the hull so you can carry several. Keep one on the
hatch lip for easy access. Easily size-adjustable storage segments. Get
the three pack with handy storage bag and pre-pack your fishing tackle
for fishing different species.
3 PACK
71704001HOBIE GEAR BUCKET 717060013 PACK WITH BAG (8” Hobie Gear Bucket)
71705001BAG FOR 3 HOBIE GEAR BUCKETS
For Hobie Mirage Outback,
Revolution and Quest. The
forward hatch liner is a space
to store gear or fish just inside
the forward hatch lid. Keeps items from sliding forward or back inside
the hull and keeps them up off the bilge. Now available for the Hobie
Outback, Revolution 11 / 13 and Quest 11 / 13 (2013+).
HOBIE HATCH LINERS
72020041 OUTBACK
72020042 REVOLUTION 13 / 2014+ QUEST 13
72020044 REVOLUTION 11 / QUEST 11
HOBIE GEAR BUCKET - DEEP
Add a drop-in “storage box” to your 8” Hobie Twist and Seal hatch. 5”
deep bucket without dividers.
Note: Does not fit Pro Angler Aft Hatch
71704021 HOBIE GEAR BUCKET - DEEP
PLANO TACKLE BOX
TACKLE BOX SMALL - 10 adjustable dividers create 5-15 compartments.
Clear/Yellow 9.13" x 5" x 1.25"
72020311 TACKLE BOX SMALL
TACKLE BOX MEDIUM - 15 adjustable dividers create 5-20 compartments.
Clear/Blue 11" x 7.25" x 1.75"
72020321 TACKLE BOX MEDIUM
TACKLE BOX LARGE - 25 dividers create 3-28 compartments. Perfect box
for extra long bulk storage. Clear/Red 14" x 9.13" x 2"
72020331 TACKLE BOX LARGE
14
HOBIE RECTANGULAR
HATCH ACCESSORIES
Add a drop-in “storage box” to your Hobie rectangular hatch or tackle
management tray that deploys two tackle boxes as you open the hatch.
71709001 HOBIE RECTANGULAR BUCKET
71708001 HOBIE TACKLE MANAGEMENT
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HATCHES / BAGS
HOBIE RECTANGULAR TWIST AND SEAL HATCH
The Horizontal hatch is stiff and strong as designed for standing-on. Unique
Hobie designed seal and flange lip drainage keeps water out. Add the
optional tackle management tray that deploys two tackle boxes as you open
the hatch or the drop-in hatch bucket for versatile small parts storage (both
shown on previous page). Includes backing ring.
71707001 HOBIE RECTANGULAR HATCH
71707002 FLANGE GASKET
8032121 SCREWS (REQ 14)
72020111
HOBIE SOFT COOLER/FISH BAG
Keep your food or catch cold all day, even in very hot conditions. High
quality construction includes half-inch closed cell foam that insulates,
vinyl coated polyester that’s durable and YKK zippers that are strong. Has
handles for carrying and d-rings on the sides for attaching to the kayak.
HOBIE TWIST AND SEAL HATCHES
Lids hinge open, so you never lose the lid. A simple twist of the handle
opens or closes the hatch. The hatch does not have to be held down
against a flat surface to seal. This allows the hatch to seal even if the
lid is partially open or tipped. Available in 6” and 8” diameters. Retrofit
kits include gaskets (and 2 ea #8031130 screws for the 8”).
717010116” TWIST AND SEAL HATCH
717010016” TWIST AND SEAL RETROFIT KIT*
717010216” TWIST AND SEAL O RING
713210016” MOUNT GASKET
717020118” TWIST AND SEAL HATCH
717020018” TWIST AND SEAL RETROFIT KIT*
717020218” TWIST AND SEAL O RING
713310018” MOUNT GASKET
HOBIE 6" HATCH BAG
Add a drop-in bag to the 6” Hobie Twist and seal hatch. Kit includes
required back-up ring with lip, screws and bag with drawstring.
(Available for 6" hatch only)
5421 6" HOBIE BAG KIT
Large size Bag is approximately 70 qt. The top has an adjustable
bungee cord for storing additional gear. Dimensions: 36 inches long,
8 inches tall, bag tapers from 10 inches wide in the front to 20 inches
wide in the back.
72020111 SOFT COOLER / FISH BAG - LARGE
Medium size Bag is approximately 26 qt. Easy access zipper on top and
drain plug on bottom. Fits inside front hatch of many Hobie kayaks.
Dimensions: 24 inches long, 7 inches tall, bag tapers from 7 inches wide
in the front to 16 inches wide in the back.
72020113 SOFT COOLER / FISH BAG - MEDIUM
PA BUCKET/ALL
CARGO COOLER
This cooler is designed to fit within
a Pro Angler forward hatch liner. It
will also fit nicely in all other Mirage
aft cargo areas. Bring along your
favorite cool beverages and foods
or use as a catch bag. Includes
several mesh pockets, shoulder
strap, carry handles, tiedown rings.
72020087 COOLER - PA BUCKET / ALL CARGO
HOBIE SMALL
ROLL TOP DRY BAG
8” diameter x 14”. This dry bag is built of tough
materials. Seals tight to keep your stuff dry.
71703001 8” HOBIE DRY BAG
SEE BAG
GUSSETED STOW BAG
6” by 12” gusseted bag has hooks on both ends to clip to your boat.
Also available in 8” x 12” size. Securely stow tools, gloves or small parts
for easy access.
72000B 6”x12” GUSSETED STOW BAG
72005B 8”x12” GUSSETED STOW BAG
HOBIEKAYAKS.COM
Transparent 13 oz. vinyl bags make quick work of
locating things. Its cylindrical shape will hold odd
shapes such as cameras, binoculars, lunches, etc.
without distortion of bag and resultant potential
leakage.
72210TSEE BAG (8” x 14” 622 cu.in.)
72230TSEE BAG (11” x 19” 2200 cu.in.)
15
TRANSPORTATION
KAYAK CARTS
Kayak Carts or Dollies are a must for easily transporting
your kayak from car to water’s edge. Simply roll the
kayak down to the water and off you go! All of the latest
Hobie Kayaks can use “Plug-in” carts. “Plug-in” carts do
just that...they plug right into the bottom of your kayak.
Choose Standard for light duty and solid surfaces, Heavy
Duty for heavy loads and rough terrain or the “all-terrain”
Hobie Trax “2” version which is the best over soft sand.
Each cart has a sturdy stainless steel frame. Some older
models or other brands of kayaks may require the use of
a cart that straps on.
KAYAK CART - “PLUG-IN” HEAVY DUTY
Highest capacity cart with very durable knobby (Solid Foam) 26 cm
wheels. Welded Stainless steel frame. Wheels are easily removable for
storage. Also includes cart keeper feature and cart clamps. This cart
has the highest capacity. (225 lb Capacity) Suitable for Pro Angler and
Tandem Island. Best for transport over solid surfaces.
80046001 HEAVY DUTY CART
*Note Tandem Island use issue
80046021 PIN, QUICK CLIP
Wheel retainer pin for Std and HD carts.
KAYAK CART “PLUG-IN” STANDARD
Light weight with durable 26 cm tires and strong spoked wheels.
Stainless steel frame. Wheels are easily removable for storage. Also
includes cart keeper feature and cart clamps. This cart has the medium
capacity. (150 lb Capacity). Great for transport over solid surfaces.
80045001 STANDARD CART
80045101 i - KAYAK CART
i - kayak cart (not pictured) plugs into an inflatable’s MirageDrive well.
CART KEEPER FEATURE
Standard on Hobie Plug-in carts! After insertion of the cart, pull the
dome pin out and re-insert as shown to keep the cart captive.
POST COLLAR / CLAMP FEATURE
Collar clamps help reduce the direct loading of the cart on your kayak’s
bottom / keel. Direct loads on hull bottoms can cause deformation
of the kayak. Even loading at scuppers and hull bottom reduces hullbottom deformation issues. Included with all new plug-in carts.
16
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
TRANSPORTATION
KAYAK CART “PLUG-IN” HOBIE TRAX “2”
The Trax “2” Cart has 24 cm (blow-molded polyurethane) pneumatic
tires. These tires have a high capacity and are very durable! Welded
Stainless steel frame. Wheels are easily removable for storage. (176 lb
Capacity) This is an all around cart for soft sand and uneven terrain.
The tires are wide and can be deflated for better performance over
softer sand and soil. Older V1 Tires shown.
80044101 TRAX “2” CART
*Note Tandem Island use issue
KAYAK CART “PLUG-IN” HOBIE TRAX “2-30”
All of the great features of a Trax 2 cart with higher capacity! The Trax
“2-30” cart has 30 cm tires, bringing the capacity up to 242 lbs. Even
with a lighter load, the Trax 2-30 will be the best plug-in cart for sand.
Older V1 Tires shown.
80043001 TRAX “2-30” CART
*Note Tandem Island use issue
80044202 CRADLE FOR PLUG-IN CART / TI USE
CAUTIONS
Be certain that the cart inserts clear through the kayak and protrudes
into the cockpit / cargo area surface. Kayaks should never be left on
carts for prolonged periods of time.
KAYAK CART C-TUG
Carries up to 80kg (170lbs), dismantles for easy stowing, won’t rust.
Requires no tools and assembles in seconds. Dismantles in seconds,
allowing you to stow it in your kayak hatch. Made of non-corroding
engineering polymers, with stainless steel reinforced axles, this cart is
designed for harder terrains.
80047201 C-TUG CART
HOBIEKAYAKS.COM
*Note: Plug-in cart use on a Tandem
Island requires add-on cart cradle
#80044202 to disperse load
KAYAK CART - UNIVERSAL
This cart attaches to any kayak via straps and buckles. Pneumatic
wheels allow this cart to roll more easily over rough terrain. Padded
“hull-centering” bunks keep the kayak centered on the cart while the
tie down straps hold the cart firmly to the boat. Carries loads up to 150
lbs. Welded Stainless steel construction. Wheels are easily removable.
80041 UNIVERSAL CART
17
TRANSPORTATION
HOBIE KAYAK DOLLIES
WARNINGS
Full size dollies for the Adventure / Tandem Island or Pro Angler /
Universal includes a hull / ama cradle, and a pull handle. Much stronger
and easier to load and use than plug-in carts for larger, heavier models.
Two different wheel styles allow for optimum performance on hard pack
surfaces – or soft sand beaches. Choose beach wheels for use over soft
sand or other surfaces. Choose the tuff tire if your launch surfaces are
solid. The handle makes it easier to insert or remove the cart under the
boat or pull along when un-loaded. The handle also acts as a “kick-stand”
to keep the cradle upright during loading. The handle and wheels are
easily removable for storage. The Pro Angler / Universal dolly will fit a
wide variety of Hobie Kayaks including Pro Anglers, Outback and Oasis.
Recommended maximum load equal to one Tandem Island without
excess personal gear.
Cart and Dolly: Do not over-load. Not for towing or for speeds faster
than average walking pace. Not for long hauls or stairs. Check cart
fit carefully to be sure tires do not rub hull, on scupper versions that
the posts fit clear through to the cockpit. Heavier model kayaks may
require sleeves below cart clamps to keep hulls from contacting
wheels. Not for prolonged use / storage. Incorrect use can damage or
distort hulls.
80046100 AI/TI DOLLY
W/ 38 cm TUFF TIRES
80046200 AI/TI DOLLY DOLLY
W/ 42 cm BEACH WHEELS
80046200 AI/TI DOLLY - WITH BEACH WHEELS
80046201 PA/UNI - WITH BEACH WHEELS
80046202 PA17 - WITH BEACH WHEELS
80046100 AI/TI DOLLY - WITH TUFF TIRES
80046101 PA/UNI - WITH TUFF TIRES
80046102 PA17 - WITH TUFF TIRES
(72061001 Replacement wheel retainer pin)
(72061001 Replacement wheel retainer pin)
LOADING
1. The handle helps you
get the cart down to the
boat. Handle is also easily
removable for cart storage.
18
2. Lift the bow and slide the
cart under.
3. Leave the handle in place
while moving the boat.
4. Adjustable strap included
to secure the boat onto
the cart.
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
TRANSPORT
38652202 TRAILEX TRAILER - PA17T
Shown with optional cradles, dolly and
dolly hanger kit installed
KAYAK TRAILERS
(1 7/8" Ball)
Trailers ride on 8” wheels and use a 1 7/8” coupler. Trailex trailers are certified to
USA DOT standards for use on USA roads.
Carry one or more kayaks inverted on the crossbars (crossbar padding / cradles
shown are not included with trailers). For the Adventure Island, Tandem Island or
Pro Angler, add the custom designed hull cradle sets (Adventure Island V1 cradles
shown to right on double trailer). These are form fitted and padding covered. For
two Adventure Islands, order the double trailer (Double-Double for two Tandem
Islands) add two cradle sets. The optional center Tower System adds storage
possibilities. The Tower includes mast / sail hangers and is also designed to mount
an equipment box on top. Easily mount the Hobie Toy Box on top of the Tower.
38652000 SINGLE
38652000 TRAILEX TRAILER - SINGLE AI / PRO A 12,14
Shown right. Order cradles separately.
(Crossbars 42” / 15’ 2” assembled length / 220 lb Capacity).
38652001 TRAILEX TRAILER - SINGLE TI
Order cradles separately.
(52” Crossbars / 15’ 6” assembled length / 350 lb Capacity).
38652200 TRAILEX TRAILER - DOUBLE
Shown above (Right) with AI and cradle set option and (#38652210) tower system.
(84” Crossbars / 16’ 1” assembled length / 550 lb Capacity). Order cradles separately.
38652200 DOUBLE
*Trailer shown with
Adventure Island
cradles option
38652201 TRAILEX TRAILER - DOUBLE / DOUBLE
Not shown. Required to carry 2 Tandem Islands or one TI and AI side-by-side.
(96” Crossbars / 16’ 1” assembled length / 550 lb Capacity). Order cradles separately.
38652202 TRAILEX TRAILER - PA17T
Order cradles (72020404) and optional Dolly Hanger Kit (72020405) separately.
38652210 TOWER
Add the optional tower for equipment box mounting on a double trailer, multi
kayak transport (Up to 4 kayaks leaned against tower). Also includes two mast
carriers for 2x AI/TI configuration.
67”
NOTE: Loads may require a red warning
flag if over hanging lights by over 4 feet.
Trailer prices DO NOT include freight to dealer or assembly costs.
CRADLES
67”
72020400 AI V2 CRADLES
72020402 TI CRADLES
72020401 PRO A 12/14 CRADLES
72020406 CRADLE SET (1 boat) - ADVENTURE ISLAND 2015
72020400 CRADLE SET (1 boat) - ADVENTURE ISLAND V2 (2011-2014 MODEL YR)
72020402 CRADLE SET (1 boat) - TANDEM ISLAND
72020401 CRADLE SET (1 boat) - PRO ANGLER 12 / 14
72020404 CRADLE SET (1 boat) - PRO ANGLER 17
(Most Cradle mount spacing 67” for proper fit / No fasteners included)
HOBIEKAYAKS.COM
19
TRANSPORT
STORAGE BOX “TOY BOX”
Roto-molded seamless. Big enough to hold paddles, MirageDrives, Seat
backs, Life Vests and wet wear and have room left for odds and ends.
The bottom is ribbed to allow wet things to drain. There is full access
from front and back. Mounting hardware is not included. Length 10’ 4”,
Width (rear) 21", Depth (rear) 13", Width (front) 19 1/2", Depth (front)
10", Weight 55 lb.
1825WHT TOY BOX
ROOF RACK PAD
Beefy car roof rack pads, made from durable black polyester with
Hobie diamond logo. Easy-on split bottom with Velcro™ closure.
72045 24” ROOF RACK PAD (Pair)
72046 36” ROOF RACK PAD (Pair)
72044 24” AERO RACK PAD (Pair)
72049 36” AERO RACK PAD (Pair)
Prices DO NOT include freight to dealer. Additional freight charges may apply.
HOBIE TIE DOWN STRAPS
Rack tie-down straps, made of durable black polypropylene webbing.
Diagonal cut and ironed ends make threading ends into buckles easier.
72042001 TIE DOWNS 12’ (Pair)
72043001 TIE DOWNS 15’ (Pair)
20
QUICK STRAP SPORTRACK
Easily installs on any vehicle with front and rear doors or opening
windows. The straps secure inside the car, no gutter hooks are required.
Packed in mesh storage bag (#72040 with bow and stern tie downs).
72040 QUICK STRAP SPORTRACK (30” Pair)
72035 QUICK STRAP SPORTRACK (24” Pair / No Lines)
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
LOAD ASSIST
LOADING ACCESSORIES
Load a kayak on to your vehicle without having to lift the full weight.
Perfect for loading up solo or for car topping heavier boats.
UNIVERSAL SIDE LOADER
T-LOAD HITCH MOUNT
The Rhino-Rack Universal Side Loader assists you in loading your kayak,
ladder, camping gear or other longer heavy items, onto your roof rack
crossbars. Simply lift one end of your load onto the Rhino Universal
Side Loader, then pivot your load onto your crossbars.
The Rhino-Rack T-Load Hitch Mount is the perfect load carrying solution
for long loads. Built tough from E coated Steel, the T-Load allows you
to effortlessly load and transport your kayak. Mounting to a 2” hitch
receiver or ball the T-Load features an adjustable tilt position.
Be sure to tie down your load once it is safely on the crossbars using
load rated fastening straps.
A fitting kit is provided to attach your Rhino-Rack crossbars directly to
the top of the T-Load and because we’re top blokes we’ve also thrown
in a non-slip mat to stop slippage when loading.
FEATURES INCLUDE:
Push button for quick release and easy storage; Crossbar clamps to suit all
popular roof racks; Heavy duty storage bag; Support pole for loads greater than
44lbs (up to 132lbs); Integrated load stop prevents load from sliding off bar;
foam padding for protection of your gear; Padding on the underside of clamps
to protect vehicle roof; Fits all Rhino Aero, HD/Euro, all Thule Square, Aero bar &
Wingbar, Rola, Prorack and Whispbar
FEATURES INCLUDE:
Single person use; Adjustable height & tilt position: Minimum height 950mm;
Maximum height 1540mm; 1 x Rhino-Rack Aero crossbar; Rhino-Rack crossbar
fitting; 1 x RTLK (Rhino-Rack T-Load Sling Kit); Non slip mat; Choose the version:
2” hitch receiver or 2” / 50mm Ball mount; 3 year warranty
72040013 RHINO 2” RECEIVER T-LOADER
72040014 RHINO 2” BALL T-LOADER
72040011RHINO UNIVERSAL SIDE LOADER
Watch Our
Video
NAUTIC KAYAK LIFTER
Is a complete system for easily loading and unloading sit on top kayaks.
80kg (176 lb) load capacity, does not require any heavy lifting and a
single person can operate it using the included winch.
The unit is designed to be neatly stored on the roof of your vehicle
beside your kayak when not in operation.
Important Note: Designed to fit Rhino roof rack systems with bar overhang
with at least 100mm. Contact Rhino for other rack Mfg compatibility.
72040012 RHINO NAUTIC KAYAK LIFTER
HOBIEKAYAKS.COM
21
STORAGE / COVERS
KAYAK COVERS
72054 SHOWN ON HOBIE TANDEM ISLAND
Easy to install or remove, fits over the hull (like a fitted sheet on a
mattress). Straps and pull string adjust for a tighter fit. Cross straps
secure the cover on your hull for windy conditions. Heavy duty UV
resistant canvas material in a neutral color for better aging. Universal
covers fit over the hull when upright or upside down. To help prevent
distortions to the hull bottom shape, Hobie recommends that our
kayak hulls be stored upside down resting on the cockpit rails. This
is also best for deflecting rainwater and prevents water pooling in
the cockpit or on the cover. When planning to store a hull upright, be
sure to properly support the hull bottom to prevent hull distortions.
Universal fit covers may not entirely cover some hulls, especially with
accessories installed.
CINCH STRAPS
72055 Kayak Cover PA14 Custom
72056 Kayak Cover PA12 Custom
DRAW STRING
72050 Kayak Cover / 9'-12' 6” x 49”
(Lanai, Maui, Sport, Revolution 11, Outback, Kona-Tight, Quest 11)
72051 Kayak Cover / 12'-15' x 49”
(Kona [Loose], Pursuit, Mirage Classic, Tandem, Oasis, Outfitter, Quest
13, Outback, Revolution 13)
72052 Kayak Cover / 14'-16' x 55”
(Adventure, Revolution 16, Tandem, Oasis, Odyssey)
72054 Kayak Cover / 16'-18' 6" x 76”
(Wide - Tandem Island and 2015+ Adventure Island with amas folded
against hull and rudder removed / layed on deck)
72056 Kayak Cover PA12 Custom
72055 Kayak Cover PA14 Custom
72057 Kayak Cover PA17 Custom
72053 Kayak Cover / 14'-16' 6" x 76”
(Wide - Pre-2015 Adventure Island with amas folded against hull and
newer style rudder removed)
ONE WRAP VELCRO®
Cut this double faced Velcro® product to
length and wrap it around items, line or
whatever you need to secure. One side
is hook and the other a loop, so a single
piece is all you need.
7904 ONE WRAP, PER FOOT
SHOCKCORD BALL TIES
Lashing equipment to your boat is quick
and easy with this handy tie-down.
Dozens of uses.
370 SHOCK CORD BALL TIES EA
22
RUDDER COVER
ISLAND / TI
Rudder protection for 2011+’ AI and all
Tandem Island Rudders.
82420001 RUDDER COVER ISLAND / TI
MULTI STRAP SYSTEM
Hang your kayak for storage, use
as bow and stern lines or use them
as carrying handles. Multi purpose
straps can be attached to the boat and
adjusted for many uses. Made from
durable black polypropylene webbing.
72041 MULTI STRAP (Pair)
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
RIGGING STANDS
HOBIE MIRAGE KAYAK RIGGING STAND
TALIC SEAHORSE RACK
Place your kayak at a comfortable height for preperation of gear or
while mounting hardware. The kayak can be bolted to the rack through
seat scupper holes for a secure and stable platform. Move the rack
and boat around easily using a set of plug-in wheels as shown (not
included). Multiple options for wheel use depending on your needs.
The rack easily disassembles for flat storage. Not recommended for
long term storage.
87363222 FLOOR STAND, MIRAGE RIGGING
Portable storage for kayaks under 100 lbs. Made of corrosion resistant
anodized aluminum. Can be used indoors or out. Raises your kayak up
to accessible height for outfitting accessories, cleaning or just keeping it
off the garage floor. Collapsible for storage.
72088001 31” TALIC SEAHORSE RACK
HOBIEKAYAKS.COM
23
HOBIE evolve v2
HOBIE evolve POWERED BY TORQEEDO
This quiet and efficient electric motor will dramatically expand your horizons. With
the Hobie evolve, you can either maintain steady cruising speeds of two knots (motor
only) for hours, or you can open the throttle for short sprints. Best yet, depending on
your set-up, you can use the evolve to augment your boat speed while also using your
MirageDrive. And thanks to its cockpit-mounted Remote Throttle, you always know how
much juice you have left in the system’s 320 Wh Lithium-Manganese battery. Runtime
estimated as 8 hr 20 min at 2.6 mph / 48 min full throttle.
The evolve offers increased battery capacity, longer range and solar charge / run
capability. Includes well mounted drive for all Mirage Kayaks and optional Twist and
Stow rudder attachment for (most) non-inflatable models.
72022030 HOBIE evolve v2 MOTOR KIT - Kayak
72022040 HOBIE evolve v2 MOTOR KIT - i Series
KIT INCLUDES:
Ready-to-go Mirage well-mounted Hobie evolve v2; All cables for the motor and
throttle units; All mounting hardware; Assembly that integrates the motor with a
Twist and Stow rudder*; Sealed/Waterproof Lithium-Manganese high-performance
battery; 320 Wh (charger included); Remote throttle system displays speed and
distance information generated by an onboard GPS unit; Magnetic safety key;
Waterproof fittings and cable connectors; Solar charging port; Corrosion-resistant
materials ensure durability and performance; Lightweight power: Total weight of
installed kit is 18 lbs (8.16 kg) or less, depending on the configuration.
LITHIUM BATTERY V2
MIRAGE WELL MOUNT
6.6-pound, 320 Wh LithiumManganese battery (11Ah at
29.6V) The battery is buoyant and
completely waterproof. Its builtin GPS unit generates pertinent
information such as speed and
range. Solar charge / run port.
Mirage-mounted evolve weighs
a scant 6.4 pounds—that’s
0.2 pounds less than the
MirageDrive.
2 for 1
BOTH MOUNTS
INCLUDED
* Rudder Mount for all Mirage Series Kayaks with
Twist and Stow Rudder Systems. Not Compatible
with Inflatable Kayaks, Island Series or Pro Angler
RUDDER MOUNT
REMOTE THROTTLE
A lightweight assembly to easily
integrate the evolve motor with a
Twist and Stow rudder. Pedal and
motor; motor, or simply pedal. When
off, the engine becomes your rudder
or it can be brought on deck via the
Twist and Stow controls.
(The rudder mount option is not
compatible with inflatable series, Island
series or Pro Anglers)
Remote Throttle, which attaches via
a RAM mounting unit (included) to
provide throttle control from your
favorite seating position. The LCD
screen displays all the trip info you
need (such as speed and range)
while you’re underway. For safety,
the unit features a magnetic keyto-throttle connection; break this
magnetic connection and the motor
immediately stops.
Note: Torqeedo Warranty is handled directly by Torqeedo. Refer to documentation included with these products.
SOLAR PANEL
Add a solar charging panel to your evolve v2
system. Can charge the battery or run the
motor indefinitely at approximately 2 knots
(with optimum sun conditions). Solar panel
uses dedicated plug-in on the v2 battery.
23 Watts of power for charging in best sun
conditions, Weatherproof, Marine-grade
connection, Ultra Light Weight, Ultra Thin,
Ultra Durable, Roll for easy storage, Easy
to use, Tested in salt water, Stainless Steel
Grommets, Stainless Steel Rivets, Custom
Built for Hobie Cat, Made in the USA.
Size Unrolled: 35.55” x 26.15” / Size Rolled:
26.15” x 6.0” / Cable: 10’ / Watts: 23 Watts /
Operating Amps: .75 Amps / Operating Volts:
30 Volts / Weight: 1.4 Lbs
72022133 v2 SOLAR PANEL 23w
24
TORQ TRAC
The dashboard for electric motors on
your smartphone. Bluetooth accessory
plugs in-line on the throttle cable and
transmits a variety of great information to a
smartphone. The App can be downloaded
for free from the App store on your device.
FEATURES
Everything easily readable, even at night; Know
how far you can still go: remaining range is
shown on a map in real time; Uses waypoints
for navigation and estimated time of arrival; GPS
information; Trip logging and eco logging: see
exactly how you’re doing; Warning messages in
plain language Individually adjustable
72022010 TORQ TRAC ACCESSORY
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
TROLLING MOTOR
INCLUDES WIRELESS CONTROL RIGHT OUT OF THE
BOX, DURABLE AND RELIABLE, PRECISE STEERING
AND CONTROL, AND VERY QUIET ON THE WATER.
Custom 50” shaft
length to best fit
your Hobie!
Key Features:
• Anchor Hold
- Hold position with a touch of a button, no matter how deep
- “Jog” in precise increments from an anchor point using directional arrows
- Save/recall 8 locations
• Heading Lock
- Maintains compass heading navigation
72020120
TROLLING MOTOR
Xi5
50”
FRESH
12v
55FW
GPS and Sonar
• Routes
72020121
- Record/recall 8 routes of up to 4 miles each
TROLLING MOTOR Xi5
- Virtually unlimited route record/recall when connected to certain
50”
Lowrance fishfinders
SALT
• Cruise Control
12v
- Maintain a GPS speed while navigating
55SW
GPS
MOTORGUIDE® XI5 TROLLING MOTOR
12V 55FW CUSTOM-HOBIE 50” SHAFT AND PINPOINT GPS
Anglers can command precise motor and steering control while seated
or standing with the wireless remote. Engage the motor’s Pinpoint GPS
functions, including anchor and jog, route record and playback, heading
lock, and cruise control, to optimize kayak/boat control in all angling
locations and conditions. A built-in 83/200 kHz transducer is standard with
the freshwater model. Corrosion-resistant components are standard with
the saltwater model. Both motors provide a quiet and smooth ride that will
assist anglers in getting to the fish without disturbing them. Both models
require MotorGuide QR bracket (72020100) and Hobie trolling motor
mount (72020090) to mount on the Pro Angler 17T.
We chose a 50” shaft specifically for Hobie Pro Angler 17T. See the motor
head for directional control when seated while keeping the motor depth
optimal. Longer shafts can either catch on over hanging trees or be too
deep in the water. Too short and the motor head is not visible over your
PA17 crew.
72020120 TROLLING MOTOR Xi5 50" FRESH
72020121 TROLLING MOTOR Xi5 50" SALT
72020100 MOTORGUIDE QR BRACKET
PARTS
72020122
72020123
72020124
72020125
72020126
72020127
72020128
BATTERY BOX POWER CENTER
BATTERY CHARGER 12 / 6 VOLT
PROP WEEDLESS 2 BLADE 3.5"
PROPNUT / WRENCH / PINS
PINPOINT GPS GATEWAY KIT
NMEA2000 STARTER KIT
6-PIN LOWRANCE TOUR ADAP
Note: MotorGuide Warranty is handled directly by MotorGuide. Refer to documentation included with these products.
HOBIE PA17 TROLLING MOTOR MOUNT
Easily mount a trolling motor to your Pro Angler 17 Tandem using the
Hobie trolling motor mount. Designed specifically for the PA17 the
mount allows easy removal of the motor for storage. Fits standard
width motors. MotorGuide models listed here require a wider mount
so add the 72020100 Quick release bracket.
72020090 TROLLING MOTOR MOUNT / PA17
HOBIEKAYAKS.COM
25
HOBIE LIVEWELL
LIVEWELLS
Liven up your day on the water
with the Hobie Livewell!
HOBIE LIVEWELL
Water intake and discharge fit right into the
existing scuppers in the cargo area. With a
high-flow self-priming* Attwood pump, a 6
volt sealed gel cell battery, adjustable drain,
and the capability of holding up to 8 gallons of
water this tank can handle almost any creature
that you can squeeze into it. Ready right out of
the box! Just charge and go!
(*requires forward motion in the kayak to prime pump)
72020007 HOBIE LIVEWELL BAIT TANK
72020015 ROD HOLDER - LIVEWELL
(Additional rod holders include the required fasteners)
(Livewell replacement parts shown on page 51)
72021035 ADVENT ISL LIVEWELL ADAPTER KIT
Adapts position and intake system to fit LiveWell into a Hobie Adventure Island prior to
2015 model year.
Weight: 12.7 lbs / 5.76 kg
6V SEALED GEL CELL BATTERY
FEATURES
Pump; On-off switch; 6 Volt sealed Gel Battery; Charger; Battery compartment
with lid; Carry handle; Adjustable hold down straps; Twist-n-Seal access lid.
Fully assembled / charge and go! Custom designed to fit the Hobie Mirage
Outback (Newer models w/o cooler recess), Sport, Adventure, Revolution, Newer
Oasis, Pro Angler (needs 7” down tube) and the Quest.
THREE ROD HOLDERS Hobie has included three rod holders
to make this livewell one of the most functional pieces of
fishing equipment that you’ll ever own. Hobie has left you
enough room to attach two more!
26
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HOBIE LIVEWELL XL
HOBIE LIVEWELL XL
Larger capacity, fits all Pro Angler models. 6 gal/22.71 L and 11 gal/41.64 L
72020072 HOBIE LIVEWELL XL BAIT TANK 72020015 ROD HOLDER - LIVEWELL
(Additional rod holders include the required fasteners)
TANK WATER LEVEL CONTROL
Adjust the Livewell XL tank water
level using the included “C-clip” or
drain the tank with the simple twist
of a knob.
The Livewell XL comes standard with two
additional rod holders for a total of four
rod holders.
Weight: 15.4 lbs / 6.98 kg
6V SEALED GEL CELL BATTERY
REMOVABLE TANK PARTITION
The removable tank partition keeps debris
and critters from clogging internal pumps
and drains or hiding in hard to reach areas.
The partition also provides a rounded
surface so baitfish stay healthy and happy.
HOBIEKAYAKS.COM
CORROSION RESISTANT POWER SWITCH
Wire connections are housed inside a
magnetic (reed) switch, ensuring maximum
durability and corrosion resistance.
27
HOBIE ADJUSTABLE H-BAR
ADJUSTABLE H-BAR
Standing support for Kayaks! The adjustable H-Bar will integrate with
all H-Rail accessories for easy customization. It folds up when you need
it and away when you don’t. The aluminum extrusion is strong and
lightweight for leaning against or holding on to while entering/exiting the
boat or pulling yourself up from a seated to a standing position. Fully
adjustable to fit a wide variety of kayaks. The PA17 requires an adapter
kit (extra set of H-Rail clamps and a longer center bar) when used in the
middle and aft seat positions.
84500114 HOBIE ADJUSTABLE H-BAR
84500115 PA17 H-RAIL ADAPTER KIT
CENTER BAR
Two, included, center bar sizes
enable installation on boats of
varying widths.
H-RAIL EXTRUSION
Integrates with all H-Rail
accessories, like rod
holder mounts, for easy
customization.
• Lean against to stabilize
• Pull yourself up from a seated position
• Grab ahold to assist when entering the kayak
• Variable height settings
• Folds out of the way
WEIGHT
4.5 lb / 2.04 kg
INCLUDES
Mounts
Hardware
ADJUSTABLE
Four telescoping legs,
along with foot-mount
placement, enable a wide
range of height settings.
28
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HOBIE H-CRATE / H-RAIL KITS
H-CRATE STORAGE SYSTEM
72020088 HOBIE H-CRATE
•Fits on the back of a fishing kayak or SUP
•Keeps tackle, fishing rods and gear organized
•Lightweight & durable
•Can Be Disassembled to Store/Travel Flat
ROD HOLDERS
Four rod holders
with shock cord
rod retainers.
H-RAIL MOUNTING
PLATFORM
Carrying Handles Provides
structural strength and is great
for mounting H-Rail accessories.
Weight: 5.8 lbs / 2.63kg
Includes: 4 Heavy duty straps
STORAGE
Keeps your valuables
organized in one easyto-transport bin.
GRID WALLS
Attach additional accessories using the
molded hole patten (72020015 Rod Holders).
H-CRATE
SOFT COVER
Vinyl cover with a zipper opening.
Keeps gear drier and out of UV.
Keeps gear in the crate from
falling out in a capsize. Tested to
extremes… the cover holds in place
under heavy load even if inverted
or tumbled. Easy to install using
provided panel rivets. Double
zipper is nylon, not corrosive and
functions very smoothly.
72020097 SOFT COVER
H-RAIL UPGRADE / ADD-ON KITS
MOUNT ADDITIONAL ROD
HOLDERS TO H-CRATE
You can mount many additional rod holders to
the grid walls.
72020015 ROD HOLDER - LIVEWELL
(Additional rod holders include the required fasteners)
PADEYE XL
Replace existing smaller padeyes to enable
attachment of multiple straps or rod leashes
on the same eye.
71125001 PADEYE XL
HOBIEKAYAKS.COM
H-Rail is a durable, lightweight, patent pending mounting system for
quickly securing a complete line of H-Rail accessories. Easily attach,
move or remove mounts and accessories quickly. The 12-Sided rails
allow rotation at 30 degree increments and will hold when your H-Rail
accessory is clamped in place. Get your FishFinder, Rod Holders, Tackle
Buckets and more... right where you want them... then easily silde them
out of the way!
Update older model Pro Angler 12 and 14s to the H-Rail system. Kits
include everything needed: Rails, mounts, attachment hardware and
instructions. Instructional video also online.
84625312PA 12 H-RAIL UPGRADE KIT
84625314PA 14 H-RAIL UPGRADE KIT
For other kayaks or for just about any aplication add 9” and 21” straight
H-Rails anywhere you like! Kits come with H-Rail tubes, end fittings and
attachment hardware.
84626001H-RAIL BOLT ON RAIL KIT 9”
84626101H-RAIL BOLT ON RAIL KIT 21”
29
HOBIE H-RAIL ACCESSORIES
HOBIE
H-RAIL
SYSTEM
ADJUSTABILITY IS ELEMENTARY.
Attaching, removing and adjusting H-Rail
accessories is literally as easy as one, two, three.
1. Wrap clamp around rail.
H-RAIL
TACKLE BIN
Add more storage
or hold more gear.
Designed to hold
fishing tackle boxes, the
tackle bin also includes a
removable tray, Bungee®
retainers, and plenty of
places to clip things to.
Store tools and use it as a place to collect odds
and ends that usually clutter your fishing area.
84623001 TACKLE BIN / H-RAIL
H-RAIL CUP HOLDER
Always have your favorite beverage
conveniently located and secure.
84621001CUP HOLDER / H-RAIL
2. Latch gate and tighten.
3. Close locking lever.
H-RAIL RAM® MOUNTS
Add your favorite accessories to RAM Mounts
on the H-Rail using the 1" or 1.5" ball.
84620101MOUNT 1” RAM BALL / H-RAIL H-RAIL MOUNTING PLATE
Mount almost any accessory to the
H-Rail using this universal mounting
plate. It’s durable, easy to drill through
and flat on the top and bottom, allowing
bolts, nuts and washers to fit snugly.
84622001MOUNTING PLATE / H-RAIL
84620151MOUNT 1-1/2” RAM BALL / H-RAIL
H-RAIL G-HOLD
H-RAIL STARPORT HD
The Hobie H-Rail StarPort HD allows you to
mount the four-screw base mount, which
comes with the popular RAILBLAZA locking
slide to the 12-sided H-Rail without any
drilling or tools needed.
84620204 H-RAIL STARPORT HD
H-RAIL MINIPORT
The Hobie H-Rail MiniPort allows users to fit and
re-task the full range of RAILBLAZA accessories
to Hobie H-Rails. It clamps to the 12-sided H-Rail
without any drilling or tools needed.
84620202 H-RAIL MINIPORT
H-RAIL GEAR HEAD
H-Rail Gear-Head quickly slides into place and
locks down your post mounted Scotty rod holders
and accessories. This system allows you to quickly
change rod holder positions with a simple “twist”.
84620152 H-RAIL GEAR HEAD
30
Secure paddles, push poles, nets, gaffs or anything
of moderate size up to 2 inches in diameter. The
flexible quick-release strap has two securing points
for security of minimum and maximum diameters,
providing strong retention. It clamps to the
12-sided H-Rail without any drilling or tools needed.
84620200 H-RAIL G-HOLD
H-RAIL MIGHTY MOUNT
Use it to attach your track mounted accessories.
Use it as a standalone mount to secure your
VISICarbon Pro™. Use it with the brand new
Screwball™ or the Panfish™ camera pole.
84620153 H-RAIL MIGHTY MOUNT
H-RAIL FUGOO MOUNT
H-Rail mount combines the Fugoo universal mount
with an H-Rail clamp. This can clamp to any H-Rail
or to older round Pro Angler rails too! We recomend
the use of a lanyard (74052001) to insure you keep
your Fugoo with you.
72026102 MOUNT FUGOO H-RAIL
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HOBIE ROD HOLDERS
H-RAIL ROD RACKS
Designed for horizontal rod storage.
Padding on the interior protects your
investment, plus rod retainers secure
your rods in position for easy access,
surf landings or transport. When
rotated, the Rod Rack can be used
for storing other accessories like a
paddle, sail or stakeout pole.
84625001 ROD RACK / H-RAIL
ADJUSTABLE ROD HOLDER
Fits into Hobie’s molded-in rod holders and
fastens to the boat using 2 straps and padeyes
(included). Release the lever to adjust the
angle of the rod holder. Allows you to adjust
the angle of their rod so it is best suited for
the fishing situation. It is a tube design with
a removable gimbal pin and a reel holder
that can be rotated to orient baitcasting or
spinning rods into the perfect position. The
two oversized padeyes can be used for rod
leashes. Extremely popular with anglers
who like to troll. Hobie recommends
using a rod leash to tether your rod to the
kayak when fishing for big game.
72020074 ADJUSTABLE ROD HOLDER
The H-Rail Rod Holder clamps to Hobie’s
H-Rail making it easily adjustable along
the H-Rail or rotated to a desired
angle inboard or outboard. A
second lever allows the rod
tube to be rotated at angles
forward to aft. The rod holder
can be clamped facing inboard or
outboard depending on the desired
use. It’s a tube design with a removable
gimbal pin and a reel holder that can be
rotated to orient baitcasting or spinning rods into
the perfect position. The two oversized padeyes can
be used for rod leashes or to secure the rod holder
to the boat and prevent it from slipping under high
loads. Hobie always recommends using a rod leash
and suggests the 72020099 Strap Kit to secure the rod
holder in position for big game trolling.
72020098 ROD HOLDER / H-RAIL
72020099
H-RAIL ROD HOLDER
HOBIE ROD HOLDER EXTENSIONS
These fit right into the molded-in rod holders and offer a
larger diameter sleeve that is deeper. Keep your fishing
rods secure and reels higher out of the water. Leash the
holder extension to the boat and the rod to the holder
using the molded eyes.
72020014 ROD HOLDER EXTENSION
72020099 HD STRAP KIT
HOBIE HORIZONTAL ROD HOLDER KIT
Keep your fishing rod secure and protected along the side of your kayak.
Insert the rod tip into the tip protector and lock the rod handle into
the clasp. Easy to install using the provided hardware. Choose either
through-bolts or sheet metal screws. Fits any kayak. Patent Pending.
72021060 HORIZONTAL ROD HOLDER KIT
72020000
72020001
HOBIE GEAR KEEPER
HOBIE ROD LEASH
Secure the rod leash to boat and rod. Quick snap connection feature
allows easy detachment when needed. Webbing construction with
quick connect hook.
74052001 ROD LEASH - WEBBING
HOBIEKAYAKS.COM
Keep your equipment onboard with Hobie Gear Keepers. These low force
retractor tools are ideal for gear such as pliers, dykes, lipper tools etc.
72020000 SMALL HOBIE GEAR KEEPER
Features: 36” 50lbs Breaking Strength Spectra Nylon Line, Plastic Snap Clip,
3/8” Quick Connect Split Ring.
72020001 LARGE HOBIE GEAR KEEPER
Features: 36" 60 lbs. Breaking Strength Nylon Coated Stainless Steel Cable,
Stainless Steel Spring and Hardware, Plastic Snap Clip.
31
RAM RODHOLDERS / MOUNTS
RAM
The revolutionary universal ball and socket mounting system that allows you to mount practically anything anywhere.
72023051
RAM TUBE 2008 ROD HOLDER
72023049
RAM TUBE JR HOLDER
72023050
RAM ROD 2000 ROD HOLDER
72023048
RAM ROD 2007 JR. FLY ROD HOLDER
RAM CAMERA MOUNT
*Comes disassembled - requires glueing (PVC cement)
ADD CAMERA
ADAPTER BALL
72023034 RAM GOPRO
MOUNTING BASE 1” BALL
72023035
Fits 1" Ball
RAM TRANSDUCER
ARM MOUNT Compatible
72023033
RAM SMALL ROUND BASE
1/4”-20
1” BALL
72023032
CAMERA MOUNT
18” ARMS (PAIR)
32
MOUNT TO 1.5” BASE
NOT INCLUDED
with all transducers which attach
using a 1/4” bolt. An 18” rigid
aluminum rod can be bent to
position your transducer to its
optimum location. Patented socket
technology allows for quick raising,
lowering, removal and stowage of
transducer arm. Transducer not
included with purchase.
72023035 RAM 18” MOUNT
TRANSDUCER
72023056
RAM X-GRIP UNIVERSAL
HOLDER W/ 1” BALL ARM
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
BASES / ARMS
1" / 1.5”
72023045RAM BASE 1”
BALL ROUND 2 7/16”
72023044
RAM BASE 1” DIAMOND
2 7/16” X 1 5/16”
ACCESSORY TUBE WEDGE MOUNT
(ALSO FITS SCOTTY)
1” or 1.5” BALL (1.5” Shown)
72023015 1.5” BALL
72023016 1” BALL
1.5"
1"
72023046
RAM BASE 1.5” BALL 2” X 2.5”
72023002
RAM SPACE SAVER (1.5")
1" / 1.5”
72023025
72023017
U-BOLT .5-1.25” RAIL U-BOLT 1-1.25” RAIL
BASE W/ 1.5” BALL
BASE W/ 1” BALL
GREAT FOR MOUNTING ON ROUND
RAILS SUCH AS ISLAND AKAS!
72023029
RAM RAIL V-BASE
(STRAP 1” - 2.1”) 1” BALL
1.5"
72023028
RAM RAIL BASE
(STRAP .5” - 2”) 1.5” BALL
RAM ROD HOLDERS / MOUNTS / BASES / ARMS
72023002RAM SPACE SAVER BASE 1.5” BALL
72023015RAM MAST-TUBE WEDGE MOUNT 1.5”
72023016RAM MAST-TUBE WEDGE MOUNT 1”
72023036
RAM 10” POST
EXTENSION
ARM 1.5”
72023019
RAM DBL SOCKET ARM
1” BALL
72023042
RAM BOND A BASE - INFLAT/GREY
HOBIEKAYAKS.COM
72023047
RAM DBL BALL SOCKET ARM
1.5” BALL / PLASTIC
72023017RAM U-BOLT RAIL BASE w/ 1” BAL
72023019RAM DBL 1” BALL SOCKET ASSEMBL
72023025RAM U-BOLT BASE w/1.5” BALL
72023028RAM BASE (STRAP .5” - 2”) 1.5”
72023029RAM V-BASE (STRAP 1”- 2.1”) 1”
72023032RAM CAMERA MOUNT ARMS
72023033RAM SMALL ROUND BASE 1/4”-20
72023034RAM GOPRO MOUNTING BASE 1”
72023035RAM 18” TRANSDUCER MNT
72023036RAM 10” POST EXTENSION ARM 1.5
72023042RAM BOND A BASE - INFLAT/GREY
72023044RAM BASE 1” DIAMOND 2 7/16” X
72023045RAM BASE 1” BALL ROUND 2 7/16”
72023046RAM BASE 1.5” BALL 2” X 2.5”
72023047RAM DBL BALL SOCKET ARM 1.5” P
72023048RAM ROD 2007 JR. FLY ROD HOLDER
72023049RAM TUBE JR HOLDER
72023050RAM ROD 2000 ROD HOLDER
72023051RAM TUBE 2008 ROD HOLDER
72023056RAM X-GRIP UNIVERSAL HOLDER W/
33
ROD HOLDERS / MOUNTS
RAILBLAZA
Diverse, flexible and user-friendly mounting systems and accessories. Your StarPortTM can be mounted just about anywhere! Then
add the desired accessories to mount onto the starport
STARPORT
I-SERIES BASE
STARPORT HD
H-RAIL STARPORT HD
The StarPort allows users to fit and re-task
the full range of RAILBLAZA accessories. The
StarPort can be used as either a deck mount
or flush mount base. This base not only comes
with a gasket and cap, but also features a slide
locking mechanism to confidently lock the
RAILBLAZA accessory in place. Stainless Steel
mounting hardware included.
72026207RB STARPORT BLACK
The base combines the strength of a deck
mount with the cosmetic appeal and practicality
of a flush mount. The StarPort HD can also
be mounted on many popular track systems.
Versatility of tool-free adjustment. Stainless Steel
mounting hardware included.
72026208RB STARPORT HD BLACK
Expand the rigging capabilities of inflatables,
stand up paddleboards or coolers (without
drilling). The i-Series Base allows the addition of
useful StarPort attachments. The 6x4-1/2 inch
base is easily applied to any flat surface with the
included 3M backing adhesive.
72026206 RB BLACK RIBPORT / STARPORT
Mount the Hobie H-Rail StarPort HD on the
12-sided H-Rail without any drilling or tools
needed.
84620204 H-RAIL STARPORT HD
H-RAIL MINIPORT
AKA STARPORT MOUNT
AKA StarPort Mounts allow the easy attachment of
a RAILBLAZA StarPort to your Hobie AKA (V2). The
StarPort Mount is designed to fit securely on the
AKA of an Island or Tandem Island without twisting.
72026210 RB RAILMNT AKA STARPORT COMB
FOR ALL ITEMS WITH POLYCARBONATE LOCKING SLIDE;
IMPORTANT: Use of petroleum based lubricants on the StarPort
slide will cause failure. Silicone based products are best suited
(please check contents of lubricant before using).
34
Mount the Hobie H-Rail MiniPort on the 12-sided
H-Rail without any drilling or tools needed.
84620202 H-RAIL MINIPORT
H-RAIL G-HOLD
Secure paddles, push poles, nets, gaffs or anything
of moderate size up to 2 inches in diameter. The
flexible quick-release strap has two securing points
for security of minimum and maximum diameters,
providing strong retention. It clamps to the 12-sided
H-Rail without any drilling or tools needed.
84620200 H-RAIL G-HOLD
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ROD HOLDERS / MOUNTS
ROD HOLDER II
ROTATING PLATFORM
Hold a bait caster, spinning rod, trolling rod, or fly
rod. The rotating collar secures rod in place and the
rear gimbal lock reduces rod rotation for compatible
rods. Also offered with the StarPort HD mount
(Stainless Steel mounting hardware included with
72026209 Rod Holder II / StarPort HD).
72026200 RB ROD HOLDER II ONLY BLACK
72026209 RB ROD HOLDER II WITH STARPORT HD
The Rotating Platform allows for 360 degrees
of rotation, easily clips in and out of your
StarPort. Perfect for mounting fish finders,
cameras, or other electronics.
72026201 RB ROTATING PLATFORM 102MM
CAMERA BOOM 600
G-HOLD 50
The Camera Boom 600 is the perfect way to hold the
camera and capture the action. Capturing your adventure
from the perfect angle is now made easy. Over 30 inches
long and fully adjustable with 4 moving joints, capturing
any angle is possible. This camera mount will fit into any
RAILBLAZA StarPort.
72026204 RB CAMERABOOM 600 PRO SERIES
The G-Hold 50 is recommended to secure paddles,
boga grips and anything of moderate size up to 2
inches around. The flexible quick-release strap has
two securing points for security of minimum and
maximum diameters, providing strong retention.
G-Holds install in any RAILBLAZA base.
72026202 RB G-HOLD 50MM(2”) SINGLE BLK
GUNHOLD
The RAILBLAZA GunHold allows you to safely stow
and transport your rifle or shotgun. The flexible
rubber fingers shape to fit different gun butts and
the strap secures the shotgun/rifle against vibration
and damage. The GunHold is compatible with all
RAILBLAZA Bases and can be used on ATVs, kayaks,
boats, SUPs, and all other hunting vessels.
72026203 RB GUNHOLD (EA)
CAMERA MOUNT KIT
With the RAILBLAZA Camera Mount Kit, you can
securely mount your camera on your kayak,
paddleboard, or many other surfaces by simply
making it StarPort compatible. The kit is compatible
with any camera featuring a ¼-20 thread insert while
also including a GoPro tripod adaptor to make the kit
compatible with all GoPro cameras.
72026205 RB CAMERA MOUNT KIT
RAILBLAZA ROD HOLDERS / MOUNTS
72026200 RB ROD HOLDER II ONLY BLACK
72026201 RB ROTATING PLATFORM 102MM(4”)
72026202 RB G-HOLD 50MM(2”) SINGLE BLK
72026203 RB GUNHOLD
72026204 RB CAMERABOOM 600 PRO SERIES
72026205 RB CAMERA MOUNT KIT
72026206 RB BLACK RIBPORT / STARPORT W/
72026207 RB STARPORT BLACK
72026208 RB STARPORT HD BLACK
72026209 RB ROD HOLDER II STARPORT HD K
72026210 RB RAILMNT AKA STARPORT COMB B
84620200 H-RAIL G-HOLD
84620202 H-RAIL MINIPORT
84620204 H-RAIL STARPORT HD
HOBIEKAYAKS.COM
35
ROD HOLDERS / MOUNTS
SCOTTY
Innovative designs and many versatile mounting options, we’re sure you’ll find the exact combination you’re looking
for. Scotty Rod holders were designed with one major purpose in mind: Fight the fish, not the fishing gear!
BAIT CASTER
ROCKET LAUNCHER
Holds a bait caster reel in a cushioned cradle. A slot in the front of the
rod holder allows for a spinning reel to be securely held in position. The
rod holder design has a side mounted flange, which leaves the bottom
open. This allows for the rod holder to accommodate trigger grips.
Pistol grip rod butts easily clear the sides of the rod holder for quick rod
retrieval. Rod can be secured in holder with a soft latching strap which
snaps over the top.
80048001 BAIT CASTER ROD HOLDER WITH DECK / SIDE MOUNT
RODMASTER II
FLY ROD HOLDER
Fully Adjustable rod holder, composite construction, accomodating all
rods. Locking Flush Deck Mount. To use the Scotty “lock-down” mount
system simply choose the best direction to fish from and insert the rod
holder or accessory, pushing the post straight down into the mount.
80048005 ROD HOLDER ROCKET LAUNCHER W/FLUSH MOUNT
Fibre reinforced engineering nylon offers strength, resilience
and reliability. Also comes with a removable gimbal pin. Includes
combination Side/Deck Mount which allows mounting on a flat deck
surface or transom. Mount Dimensions: 4” x 2” x 2”
Bolting Dimensions: 1 5/16” x 3 3/16”
80048004 ROD HOLDER W/DECK / SIDE MOUNT
36
Allows hands free trolling with a fly rod. Fully adjustable and includes
a safety strap. Includes No. 241 Combination Side/Deck Mount which
allows mounting on a flat deck surface or on the side of a gunnel or
transom. Fly Rod Holder Interior Diameter: 1.16”, Mount Dimensions:
4” x 2” x 2”, Bolting Dimensions: 1 5/16” x 3 3/16”
80055001 FLY ROD HOLDER WITH DECK / SIDE MOUNT
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ROD HOLDERS / MOUNTS
DECK / SIDE MOUNT
1.16”, Mount Dimensions: 4” x 2” x 2”,
Bolting Dimensions: 1 5/16” x 3 3/16”
80052001 DECK / SIDE MOUNT
GEAR HEAD MOUNT Quick and Easy,
Drop and Lock System. Allows you to secure and
re-position your rod holder with just a twist. Use
in conjunction with an extender to bring your rod
closer to you.
80048006 GEAR HEAD MOUNT
FLUSH MOUNT
Sealed base for watertight applications
(such as kayak decks). For all Scotty post
mount rod holders. Dimensions: 4” x 2” x
2”, Bolting Dimensions: 1 5/16” x 3 3/16”
80049001 FLUSH MOUNT
EXTENDER 8.5”
Easier access to your rod and reel. Extends the height
of a rod holder by 8 1/2”. Stainless steel shaft. Works
with all Scotty post mount rod holders.
80048002 ROD HOLDER HEIGHT EXTENDER 8.5”
GEAR HEAD TRACK ADAPTER
Gear-Head Track Adapter quickly slides into place
and locks down your post mounted Scotty rod
holders and accessories. This system allows you to
quickly change rod holder positions with a simple
“twist”. Designed to fit all kayak track systems.
80048007 GEAR HEAD TRACK ADAPTER
SCOTTY ROD HOLDERS / MOUNTS
80048001ROD HOLDER - BAIT CASTER W/ MOUNT
EXTENDER 6.5”
Easier access to your rod and reel. Extends the
height of the rod holder by 6 1/2”, allowing for
faster access when that fish strikes. Made from
super tough re-enforced nylon. Works with Scotty
post mount rod holders
80048003 ROD HOLDER HEIGHT EXTENDER 6.5”
80055001ROD HOLDER - FLY ROD W/MOUNT
80048004ROD HOLDER WITH SIDE-DECK MOUNT
80048005ROD HOLDER ROCKET LAUNCHER
80048006GEAR HEAD MOUNT
80048007GEAR HEAD TRACK ADAPTER
80048002ROD HOLDER HEIGHT EXTENDER 8.5”
80048003ROD HOLDER HEIGHT EXTENDER 6.5”
80052001MOUNT - DECK / SIDE 80049001MOUNT - FLUSH HUNTING
GUN MOUNT for your kayak.
Mounts to kayak rail for easy access.
72020013 GUN MOUNT
H-RAIL G-HOLD
Secure paddles, push poles, nets, gaffs or anything
of moderate size up to 2 inches in diameter. The
flexible quick-release strap has two securing points
for security of minimum and maximum diameters,
providing strong retention. It clamps to the 12-sided
H-Rail without any drilling or tools needed.
84620200 H-RAIL G-HOLD
HOBIEKAYAKS.COM
37
ACCESSORIES / MOUNTS
YAKATTACK
Designed and made in the USA by kayak anglers!
CELLBLOK
The YakAttack CellBlok is a track mounted battery box that doubles as
a mounting platform for a transducer deployment arm and fish finder
display. No need to drill holes or permanently mount fish finder parts
to your kayak. Simply loosen the 2 track mount knobs and the CellBlok
can be quickly and easily moved from one kayak to another!
72020130 CELLBLOK BATTERY HOLDER
GEARTRAC GTTL90
GearTrac GTTL90 makes your kayak not only adjustable, but fully
configurable, enabling you to change your setup from one outing to
the next. Trolling for kings today? Fly fishing tomorrow? Duck hunting
next weekend? GearTrac gives you the ability to go from a fully rigged
kayak fishing machine to a flat deck in minutes. Includes 1 track with
backing plate and fasteners. The GTTL90 features the innovative, patent
pending, top loading design. At just over 7/8” (22mm) wide, the GTTL90
is perfect for kayaks and enables users to insert a Mighty Bolt from the
top in addition to the ends, allowing for easier access and installation of
multiple accessories. Rated for medium to heavy duty use.
72020140 GEARTRAC GTTL90 4”, W/ MOUNT HARDWARE
72020141 GEARTRAC GTTL90 8”, W/ MOUNT HARDWARE
72020142 GEARTRAC GTTL90 12”, W/ MOUNT HARDWARE
THE VISICARBON PRO™
On-the-water visibility, combining a 100+ hour LED light
and a bright orange flag with a light weight design and
low wind drag. The foam base fits into standard rod
holders. The carbon fiber mast sections boast strength
and are light weight. The VISICarbon Pro™ weighs in at
just 14 ounces including the 3 included AA batteries, and
breaks down to 14” long in seconds, easily storing inside
the flag. GearTrac and Mighty Mount ready.
72020040 SAFETY FLAG/LIGHT COMBO
(Suggested Mount 72020051 MightyMount See more Yakattack mount options)
H-RAIL MIGHTY MOUNT
84620153 H-RAIL MIGHTY MOUNT
PANFISH CAMERA MOUNT
Features a split mast design with adjustable friction disks
that allow quick and easy horizontal panning. Just grab the
foam grip above center mast and rotate. Nothing to loosen,
nothing to get loose. Just point and let go.
72020051
72020052
MIGHTYMOUNT™
Use it to attach your track mounted accessories. Use it as a standalone
mount to secure your VISICarbon Pro™. Use it with the brand new
Screwball™ or the Panfish™ camera pole.
72020051W/ MOUNT HDWR
72020052SCOTTY KIT W/HDWR
PANFISH PORTRAIT
Designed for mounting in front of the
paddler, the low profile of this full featured
camera mount keeps it out of your way
but readily available for trophy pictures or
reverse angle video of the big fight.
72020054
72020053
80048007
SCOTTY GEAR HEAD
TRACK ADAPTER
SCREWBALL 1” OR 1.5”
THREADED RAM BALL AND MIGHTYBOLT™
Compatible with GearTrac System as well as other track systems.
Attaches directly to MightyMount™
72020053SCREWBALL, 1” , 1/2” MIGHTYBOLT
72020054SCREWBALL 1-1/2”, 1/2” MIGHTYBOLT 80048007GEAR HEAD TRACK ADAPTER
38
The PanFish™ was designed for over-the-shoulder video
with lightweight cameras. We recommend a maximum
payload of 1 lb, including camera and housing (if
applicable). This covers most lightweight and point-andclick style cameras.
72020055 PANFISH POLE (W/O MIGHTYMOUNT)
The pivoting head can be positioned at any
angle in the horizontal plane. This creates
the perfect scenario for “hero” shots. Can
be used for taking Catch-Photo-Release
photos while holding the fish securely to the
measuring board.
The PanFish Portrait™ was designed for a
maximum payload of 2 lbs, making it ideal for
reverse angle video with “heavier” cameras.
72020056 PANFISH PORTRAIT (W/O MIGHTYMOUNT)
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ACCESSORIES / PACKAGES
HOOKLESS MAP POCKET
Molded material resists hooking. Replaces standard
mesh pockets. Frame and fasteners not included.
Use original frame and fasteners to install.
78561001 MAP POCKET MESH MOLDED HOOKLES
FISH GRIP
Handy fish grip in a glow-in-the-dark
plastic material.
72020019 FISH GRIP
HOBIE SNIPS
Retractable line cutters.
72020103 SNIPS
HOBIE FISHING HAWG TROUGH
Holds the big ones safely for measuring and photos before release. (30in / 76cm)
72020067 HAWG TROUGH
QUAD LOCK UNIVERSAL
PHONE MOUNT
This awesome adapter allows you to mount a phone or
small device to H-Rail, H-Bar tubing. Designed for biking,
but great for Hobie rail attachment too! Quick 45 degree
twist to attach and lock. Release spring lever and turn 45
degrees to remove the device from the mount. Attaches
to rails with rubber rings or zip ties that are included in the
kit. 3M adheasive adapter attaches securly to your device
(water proof cases recommended of course).
72020511 QUAD LOCK
THE “EASY BUTTON!”
Basic combinations of accessories that work. Designed to give you what you need all in one package.
Choose fishing, safety, performance or transport.
72020022 KAYAK FLY FISHING PACKAGE
72020025 KAYAK TRAVEL PACKAGE
172023048
172023046
172063101
272020001
172046
ROOF RACK PADS - 36"
172042
TIE DOWN STRAPS
180045001 KAYAK CART "PLUG-IN" STANDARD
FLY ROD HOLDER - RAM
BASE - RAM
SIDEKICK AMA KIT (DARK GREEN)
HOBIE GEAR KEEPER LARGE 36”
72020024 MIRAGE PERFORMANCE PACKAGE
72020026 KAYAK SAFETY PACKAGE
172066001 V2 ST TURBO FIN KIT
181397001 LARGE TWIST AND STOW RUDDER
172020010 HOBIE SAFETY KIT
172020002 SAFETY FLAG
172020003 HYDROSTAR LIGHT
72020023 KAYAK CUSTOMIZATION PACKAGE
72020029 DELUXE KAYAK SAFETY PACKAGE
171115101 TOOL, SCREW-IN FITTINGS
571117001CLEAT
571116001PADEYE
172020010 HOBIE SAFETY KIT
172020040 VISICARBON SAFETY FLAG / LIGHT
172020032 BILGE PUMP
72020020 FISHFINDER PACKAGE
Fits any kayak.
172020201
172023053
172023044
172020101
LOWRANCE HOOK-3X
MOUNT - RAM LOWRANCE
BASE - RAM DIAMOND
INSTALLATION KIT
72020104 LOWRANCE READY
FISHFINDER PACKAGE
Fits Lowrance Ready kayaks without H-Rail.
172020203
172023053
172023044
172020070
HOBIEKAYAKS.COM
LOWRANCE HOOK-5
MOUNT - 1” RAM BALL LOWRANCE
BASE - 1” RAM DIAMOND BALL
LOWRANCE READY INSTALL KIT
72020021 KAYAK FISHING PACKAGE
172020020FISH FINDER PACKAGE
171706001 HOBIE GEAR BUCKET 3 PACK
172023051 ROD HOLDER - RAM TUBE
172023046 BASE - RAM BALL
172020073 ANCHOR TROLLEY KIT
272020014 HOBIE ROD HOLDER EXTENSIONS
274052001 HOBIE ROD LEASHES
72020105 H-RAIL FISHFINDER PACKAGE
Fits Lowrance Ready kayaks H-Rail.
172020203
172023053
184620101
172020070
LOWRANCE HOOK-5
MOUNT - 1” RAM BALL LOWRANCE
H-RAIL 1” RAM BALL
LOWRANCE READY INSTALL KIT
39
ANCHOR ACCESSORIES
HOBIE STAKE-OUT POLE
Hold position in shallow water by inserting the
Hobie Stake-Out Pole into sand or mud. Fiberglass
pole with metal tip, rubber grip handle and
attachment line system.
(Connect to the Hobie Anchor Trolley System for best results)
72076001 STAKE-OUT POLE
HOBIE ANCHOR TROLLEY KIT
Easily deploy your anchor, drift chute or stake out pole over the side of
the cockpit area, then move the attachment position forward or aft to
hold your boat in the position desired. Easily sit facing down stream /
wind at anchor. Simple pulley system and cleat allows adjustment all
along one side of your boat anywhere from bow to stern. PA 12 and
2013+ PA 14s are “Trolley Ready” with molded-in fittings to mount the
turning blocks.
72020073 ANCHOR TROLLEY KIT - UNIVERSAL
ANCHOR KIT
3.5 pound folding anchor, bag and 60 feet of line. (Connect to the Hobie
Anchor Trolley System for best results)
80035A ANCHOR
PARKNPOLE LINK, 3 PIECE 12’
STAKEOUT / PUSH POLE
A floating stakeout / push pole with lots of great features. Lightweight
and incredibly durable. Simply remove the middle section and go from
a 12’ push pole to an 8’ stakeout pole, or break down for easy transport
to and from the water.
72020131 PARKNPOLE LINK 3PC 12’
40
HOBIE DRIFT CHUTE
Large cone shaped "para" chute deployed in the water slows your drift
in windy conditions when anchoring is not possible or desired. Design
keeps chute just under the surface and fully inflated. Anchor line not
included. (Connect to the Hobie Anchor Trolley System for best results)
72020009 DRIFT CHUTE
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ANCHOR ACCESSORIES
POWER-POLE
Fast and secure anshoring for Hobie
Pro Angler OR OUTBACK; Power-pole,
mount and power supply!
Easy as... 1 - 2 - 3!
1 - POWER-POLE MICRO AND SPIKE
Includes Micro Driver Unit and 8.5ft Spike. This all-electric unit is extremely quiet and easy to use. It works with a ¾” spike to stop
and anchor your kayak at the push of a button. It functions as a conventional stakeout pole or shallow water anchor without having
to manually deploy it yourself. When the wind and water are moving, you won’t be. With Power-Pole’s signature strong hold, the
Micro gives you a smooth stop on the spot in seconds. Whether you’re anchored in sand, rock or mud - it’s swift, silent, and secure.
72020083 POWER-POLE MICRO AND SPIKE
(Mounting requires Hobie mounting kits to properly distribute loads. Not approved for use on other Hobie models at this time)
2 - PRO ANGLER MOUNT KIT
Attach a Power-Pole Micro to the stern of your Hobie Pro Angler
using the hardware and mounting plate that comes in this kit.
72020176
2 - OUTBACK MOUNT KIT
This Yakattack adaptor plate is specifically designed to stern
mount a Power-Pole Micro to a 2007-2015 Hobie Outback. The
offset mount allows for use with the rudder. Hardware included.
72020132 OUTBACK MOUNT KIT
or ...
3 - LITHIUM BATTERY PACK
The Micro Battery Pak is not just any battery pack; it utilizes
advanced Lithium-Ion technology to ensure the longest
performance while maintaining the highest built-in safety
standards. Delivering a minimum of 100 cycles per charge,
it can easily handle a full day of excitement on the water.
The Micro Battery Pak includes battery pack, mounting
harness, AC wall adapter, and charger.
72020185
INDIVIDUAL PARTS / SPARES:
POWER-POLE MICRO ANCHOR MOTOR Micro Driver
Unit includes wireless remote control, advanced wireless
dash switch, mounting hardware, fully adjustable mounting
bracket, electrical cord/plug/ battery terminals, quick release
cord, free app (Android), USB Connector, and Bluetooth
72020084 POWER-POLE MICRO ANCHOR MOTOR
HOBIEKAYAKS.COM
3 - HOBIE POWER KIT
Power up your Power-Pole Micro using this Hobie kit. Kit
includes 12V battery, charger, battery holder, and all of the
wire plugs, adapters and connectors.
72020076
SPIKE 8.5ft tall 3/4” spike
72020085 8.5 ft. SPIKE - POWER-POLE MICRO
MOUNT PLATE For Pro Angler 12/14/17T
72020177 POWER-POLE MOUNT PLATE ONLY
41
ELECTRONICS / MOUNTS
CHOOSE A FISHFINDER... CHOOSE A MOUNT... CHOOSE AN INSTALLATION KIT
HOOK 3X FISHFINDER
HOOK 4 FISHFINDER/GPS
HOOK 5 FISHFINDER/GPS
HOOK 7
FISHFINDER/GPS
LED backlit 3.5” color display, 320X240 resolution,
Broadband sonar with ASP, Dual Frequency 83 or
200kHz, Quick release, tilt and swivel bracket, 1 year
Warranty Supported by the Lowrance Service Program.
(Hobie Recommends Ram Mount 72023053 (add 1”
Ram base) & Install Kit 72020101 or 72020070)
72020201 HOOK 3X
LED backlit 4.3” color display, 480X272 resolution,
CHIRP sonar (medium&high)plus DownScan imaging
(455&800kHz), Built in GPS antenna, TrackBack sonar
history, Multi Window display allows for up to a
three-panel view, Built in Basemap with 3000 lakes,
Optional mapping including Lake insight and Nautic
insight map cards as well as Navionics premium and
Navionics +, Insight Genesis to create custom maps.
(Hobie Recommends Ram Mount 72023053 (add 1”
Ram base) & Install Kit 72020101 or 72020070)
72020202 HOOK 4
LED backlit 5” color display, 480X480
resolution, CHIRP sonar (medium&high)
plus DownScan imaging (455&800kHz), Built
in GPS antenna, TrackBack sonar history,
Multi Window display allows for up to a
three-panel view, Built in basemap with 3000
lakes, Optional mapping including Lake insight
and Nautic insight map cards as well as Navionics
premium and Navionics +, Insight Genesis to create custom maps.
(Hobie Recommends Ram Mount 72023053 (add 1” Ram base) & Install
Kit 72020101 or 72020070)
72020203 HOOK 5
LED backlit 7” color display,
800X480 resolution, CHIRP sonar
(med&high) plus DownScan imaging
(455&800kHz), Built in GPS antenna,
TrackBack sonar history, Multi
Window display allows for up to
a three-panel view, Built in basemap with 3000 lakes, Optional mapping
including Lake insight and Nautic insight map cards as well as Navionics
premium and Navionics +, Insight Genesis to create custom maps.
(Hobie Recommends Ram Mount 72023055 (add 1.5” Ram base) & Install
Kit 72020101 or 72020070)
72020204 HOOK 7
ELITE 7Ti
TOTALSCAN /GPS
ELITE 5Ti
DOWNSCAN /GPS
LED backlit 5” color touch screen display,
800X480 resolution, CHIRP sonar
(med&high) plus DownScan imaging
(455&800kHz) , Can be upgraded to
SideScan with the TotalScan transducer, Built in
10 kHz GPS antenna, Built in wireless connectivity,
TrackBack sonar history, Multi Window display allows for up to a fourpanel view, Built in basemap with 3000 lakes, Optional mapping including
Lake insight and Nautic insight map cards as well as Navionics premium
and Navionics +, Insight Genesis to create custom maps.
(Hobie Recommends Ram Mount 72023053 (add 1” Ram base) & Install
Kit 72020101 or 72020070)
72020205 ELITE 5 TI
LED backlit 7” color touch screen
display, 800X480 resolution, CHIRP
sonar (med&high) plus DownScan
and SideScan maging (455&800kHz),
Built in 10 kHz GPS antenna, Built in
wireless connectivity, TrackBack sonar
history, Multi Window display allows for up to
a four-panel view, Built in basemap with 3000
lakes, Optional mapping including Lake insight and Nautic insight map cards
as well as Navionics premium and Navionics +, Insight Genesis to create
custom maps, Totalscan transducer will not work with Lowrance® Ready
built-in transducer mount found on some Hobie kayaks; please consult your
Hobie kayak dealer for installation suggestions.
(Hobie Recommends Ram Mount 72023054 (add 1.5” Ram base) & Install Kit
72020101 or 72020070)
72020206 ELITE 7 TI
Note: Lowrance Warranty is handled directly by Lowrance. Refer to documentation included with these products.
All FishFinders include Lowrance standard base, transducer and cables. Find detailed descriptions and specifications for these Lowrance
products at http://www.lowrance.com/
FISHFINDER MOUNTS BY RAM
72023053
72023052
72023052RAM FISH FINDER BASE W/ 1” ARM
72023053RAM LOWRANCE BASE W/ 1” ARM
72023054RAM LOWRANCE BASE W/ 1.5” ARM
72023055RAM LOWRANCE BASE W/ 1.5” ARM
42
72023054
72023055
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
MOUNTS / INSTALLATION
FISHFINDER INSTALLATION KITS
FISHFINDER
INSTALLATION KIT
Hobie’s fishfinder
installation kit integrates
a waterproof 9AH gel cell
12-volt battery to provide
more power to run larger
units. It can also be used
to run smaller units for
longer periods of time.
Kit includes: Waterproof
9AH gel cell 12-volt battery
with attached waterproof
wiring and connectors, wire harness and connectors, 12-volt battery
charger, Hobie battery holder, Hobie 3-way through hull fittings,
foam transducer pads, zip ties, marine goop.
72020101 FISHFINDER INSTALL KIT
86505621
Hobie thru hull fittings for routing wiring
through cockpit area for FishFinders,
GPS and more. Includes two through
hull fittings with backing nuts, o-rings
and one “tree” of adapters for different
wire diameters. 3-Way version does not
86505613
require backing ring for easier installation
and allows larger cable end fittings to fit
through a larger hole. Has 3 possible cable
pass-through points.
86505621 HOBIE THRU HULL WIRING KIT
86505613 HOBIE 3 WAY THRU HULL KIT
SPARE HDI PAD SPARE BROAD/DSI PAD SPARE BATTERY PAD
MARINE GOOP HOBIEKAYAKS.COM
Note: Wires and batteries shown are not
included with mounts.
72025001 HOBIE 12v BATTERY 9AH
72025002 CHARGER - HOBIE 12v BATTERY
CELLBLOK
The YakAttack CellBlok is a
track mounted battery box
that doubles as a mounting
platform for a transducer
deployment arm and fish finder display.
No need to drill holes or permanently mount
fish finder parts to your kayak. Simply loosen the
2 track mount knobs and the CellBlok can be quickly and
easily moved from one kayak to another!
72020130 CELLBLOK BATTERY HOLDER
HOBIE - LOWRANCE READY /
HUMMINBIRD ADAPTER
84505901 ADAPTER KIT, HUMMINBIRD FF
72023035
Fits 1" Ball
RAM TRANSDUCER
ARM MOUNT
ELEC CONNECTOR SET
72021041
72021011
72025004
72021015
72025007 HOBIE 12v BATTERY HOLDER
Waterproof 9AH gel cell 12-volt battery
with attached waterproof wiring and
connectors, 12-volt battery charger
This kit is specifically
pieced together to
include everything
you need for wiring
up your fishfinder to
any Hobie kayak with
the “Lowrance Ready”
features. Kit Includes:
12V 9AH waterproof gel
cell battery and charger,
wiring hardware, and battery holder which mounts to the sail
post or in the lip of an 8” twist and seal hatch.
72020070 LOWRANCE READY INSTALL KIT
Set of male / female waterproof plugs
with wires and 4 waterproof (silicone
filled wire nut) connectors.
72021027 ELEC CONNECTOR SET
Hobie’s battery holder is versatile! Hang
inside an 8” Twist and Seal hatch or
mount to the mast / accessory receiver
inside the hull.
HOBIE 12V BATTERY
FISHFINDER
INSTALLATION KIT
LOWRANCE® READY
HOBIE THRU HULL
WIRING KIT
HOBIE 12V
BATTERY HOLDER
72025005
(1) SILICONE FILLED WIRE NUT
Compatible with all transducers which attach using
a 1/4” bolt. An 18” rigid aluminum rod can be bent
to position your transducer to its optimum location.
Patented socket technology allows for quick raising,
lowering, removal and stowage of transducer arm.
Transducer not included with purchase.
72023035 RAM 18” MOUNT TRANSDUCER
72023037 RAM 18” MOUNT STRUCTER SCAN 1&2
43
FUGOO SPEAKER
+ TOUGH
GO ANYWHERE SPEAKERS
FUGOOisaruggedBluetooth® speakerwithsixpremium
drivers delivering 360º high fidelity sound. 40 hours of
batterylifeand100%waterproofprotection.Builtfor
every adventure!
40 HOUR
BATTERY LIFE
SHOCKPROOF
WATERPROOF
MUDPROOF
FUGOO.COM
FACEBOOK/FUGOO
+FUGOO
@FUGOOlife
@FUGOOlife
SNOWPROOF
360º SOUND
FUGOO TOUGH SPEAKER
Take your favorite music with you! Awesome 360° sound in a
tough take anywhere water proof speaker system. Bluetooth®
connects to your smart phone or tablet to play your personal
music selections. Long battery life (40 hours) can make this
system last in remote locations without the need for a recharge.
The sound quality will amaze you.
72026100 FUGOO TOUGH SPEAKER
We have chosen the Fugoo Tough Speaker System and offer a
variety of mounting options. Choose the Fugo Universal mount to
use like a camara tripod fitting (1/4”-20 thread). The mount snaps
to the bottom of the Fugoo Tough and allows for various types
of attachments, lanyards or simply clip to a flat panel. Our H-Rail
mount combines the Fugoo universal mount with an H-Rail clamp.
This can clamp to any H-Rail or to older round Pro Angler rails too!
We recomend the use of a lanyard (74052001) to insure you keep your
Fugoo with you.
The Fugoo Tough package includes a USB charging cable, outlet
adapter and a small bag to keep these items in when not in use.
72026100 FUGOO TOUGH SPEAKER
72026101 FUGOO UNIVERSAL MOUNT
72026102 H-RAIL UNIVERSAL MOUNT
44
72026101
UNIVERSAL MOUNT
72026102
H-RAIL MOUNT
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HOBIE HATS
5032
Kayak
5028LXL
Penguin
5019BK
6 Panel
Low Pro
Velcro
5018BL
Blue
5027SB
Sandblast
Fitted
5016BL
Visor
Velcro
5029
First Cast
5034
Hobie Day
Buckle
Buckle
Velcro
Snap Back
Snap Back
5037SM
5037LXL
Flying H Red
5030SM
5030LXL
Patch Olive
5033SM
5033LXL
Patch Gray
Fitted
5027OM
ODM
5038SM
5038LXL
Flying H
Khaki
Fitted
Buckle
5027FF
Fishoflage
5039
Fish Blue/Black
Snap Back
HOBIE AUSSIE HAT
5024LG (23.6” - 60cm)
5024MD (22.8” - 58cm)
5027SF
Sandblast
Fish
Velcro
5026BM BEANIE (Men’s Black)
5026BW BEANIE (Women’s White)
HOBIE MICROFIBER
HAT W/ NECK FLAP
5025MF
5031
Flying H
Snap
Back
HOBIEKAYAKS.COM
LID LATCH
Don’t let that fancy new hat blow away. Secure
it to your shirt or life vest with a Lid Latch.
1553L
45
MAINTENANCE
HOBIE BOAT CLEANER &
UV PROTECTANT SYSTEM:
CLEAN AND THEN PROTECT!
HOBIE MULTI-LUBE
A planet-safe lubricant recommended for lubricating
MirageDrives and many other uses. Environmentally
friendly for in-the-water applications. Hobie MultiLube offers excellent lubrication, is an anti corrosive
coating, great for cleaning and many other uses... use
on nearly anything that squeaks, rusts, corrodes or
binds up; MirageDrives, rudder drums, cams, fishing
reels and more. The 1 oz size is perfect for getting
the lubricant into tight spaces by using the needle
applicator. The 4 oz size has a spray applicator for
coating chains and larger surfaces, shafts and bulky
parts. Every Hobie owner should have Hobie MultiLube. Be nice to our planet, keep MirageDrives and
other components running smoothly and lasting
longer without polluting our waterways. Use it for all
shop, home and sport lubrication needs.
5120HOBIE MULTI LUBE 1 OZ
5121HOBIE MULTI LUBE 4 OZ
HOBIE BOAT CLEANER
Formulated with “Green Chemistry” to safely remove
dirt and stains from Hobie products. Good on fiberglass,
polyethylene, Vinyl (trampolines) and PVC (inflatable).
Cleans the most stubborn stains off of hulls. 12 oz.
70050001 HOBIE BOAT CLEANER
HOBIE UV PROTECTANT
Protect and rejuvenate fiberglass,
polyethylene, vinyl and PVC materials. Spray
on, the protectant absorbs into the material
and leaves a UV protective layer. Reduce the
loss of essential oils and deflect the sun’s
harmful UV rays. 12 oz.
70060001 HOBIE UV PROTECTANT
MAGICA RUST REMOVER
Easily clean rust stains from fiberglass, plastic surfaces,
metal parts or fabrics. Although metal parts are made
from high quality stainless steel, machining tools often
leave carbon particles imbedded in the metal surfaces.
This material can bleed a rust stain onto other surfaces.
Magica simply dissolves the rust away.
1603 MAGICA GEL 8oz. BOTTLE
AQUASEAL MIRAZYME
ODOR ELIMINATOR
TEAR-AID
Each TEAR-AID® repair patch is made from an exceptionally tough, matte
finish, abrasion resistant, elastomer that resists puncture and tearing.
It is combined with an aggressive adhesive formulated for high bond
strength to a variety of surfaces such as canvas, leather, rubber, nylon,
most plastics, paints, aluminum, stainless steel, fiberglass, polyurethane,
polyethylene, polypropylene, vinyl and vinyl coated. TEAR-AID® Type A
and TEAR-AID® Type B provide a simple and easy method of patching
holes and tears, as well as an excellent protective film solution.
72020030 TEAR-AID / TYPE A (POLY)
72020031 TEAR-AID / TYPE B (VINYL)
There's nothing quite like the odor of damp gear left in your
car trunk for a couple of days. With one application eliminate
those odors from booties, wet-suits, dry-suits and the rest
of your gear. A 100% biodegradable product made from
a blend of 10 highly specialized, light activated microbial
elements. Works by penetrating into pores of fabric, rubber
and even hard surfaces to eliminate odor naturally.
7003 8oz.
EACH PATCH KIT CONTAINS:
(1) 3” x 12” TEAR-AID® Patch that cuts with scissors to any size, (1) 7/8”
x 7/8” Patch, (1) 1 3/8” x 1 3/8” Patch, (1) 12” Reinforcement Filament
for repairing tears at edges, (2) Alcohol Prep Pads, (1) Illustrated
Instructions and a Product Repair List.
SAIL REPAIR TAPE
Don’t get caught with your sails down! Extra
strong, Rip Stop white tape for temporary
on-the-spot repairs to torn sails, canvas,
even foul weather gear. Keep a roll in your
toolbox for emergencies.
1662 2" x 25' Roll
46
CLEAR
SILICONE SEALER
Make sure your hulls are
watertight! Clear Silicone seals
leaks around all thru-hull fittings.
376 1.5oz. TUBE
SILICONE SPRAY
Dry silicone spray for cleats,
hatch O-rings. (Image above
may not represent current
packaging or volume)
5107 SILICONE 7oz.
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
SUNGLASSES / ACCESSORIES
HOBIE CROAKIES
Keep your glasses in place! Made from wetsuit fabric that will not stretch
or lose shape when wet. Remains secure whether worn normally, raised
or lowered around your neck.
1553CR Each
LICENSE FRAME
"HOBIE"
3043 Chrome
HOBIE-MASTER OF WATER,
WIND, AND WAVES
The man, Hobie, known by just one name worldwide, has an epic life
story. This 12” x 9” hardcover book shows how it all came to be, and
more, in 17 chapters with 300 pages, 120,000 words of text and 585
photographs and illustrations. The book is available through Hobie Cat
and Hobie Kayak dealers worldwide.
LICENSE FRAME
"KAYAKING"
3044 Chrome
Surfboards, catamarans and boats, RC model airplanes (the Hobie
Hawk), and a whole lot more “toys”—as Hobie himself describes his
amazing life’s work— will all be celebrated in the biography of the man
who defined a lifestyle in surfing and sailing.
87369116 BOOK, HOBIE-MASTER OF WATER, WIND, AND WAVES
STAINLESS WATER
BOTTLE
71995001 20oz
HOBIE KEY FLOAT
Don’t lose those keys! Keep a
few bucks dry, inside the small
compartment, while on the water.
72010 Each
BOOK - FROM PENGUIN
WINGS TO BOAT FLIPPERS
Great book about taking ideas from nature to
use in products. All about the Hobie Mirage
pedal system. Written by Toney Allman from
the series “Imitating Nature”.
615 Each
STICKERS See Parts List for Pricing
12451050 / 12451051 24”
12453021 4 1/2”
HOBIEKAYAKS.COM
36601000 6”
36601011 6”
13001001 12 5/8”
12453023 CHROME BLACK
12453024 12” BLACK
12453025 12” WHITE
12453011 4 1/2”
12453031 4 1/2”
79545001 2 3/4”
47
HARDWARE
BOW SHACKLE - THREADED PIN
Part #
Pin Dia. Width Length
Max Ld#
SP1500611/4" 9/16"15/16"4400
“D” SHACKLES - THREADED PIN
Part #
Pin Dia. Width Length Max Ld#
SP1500415/32" 3/8"
SP1500513/16" 1/2"
SP1500523/16" 5/8"
SP150053 3/16" 5/8"
5/8" 1100
11/16"2640
15/16"2640
1 7/16"2640
SAFETY SHACKLE WITH 1/2 TURN
CAPTIVE PIN
Part #
Pin Dia. Width Length
HARKEN 16MM AIR BLOCKS
Harken’s newest small blocks for control lines.
Accepts up to 7/32" line, 900 pound load, 5/8"
sheave diameter. Ultra light weight.
H404 SINGLE
H405 SINGLE w/ BECKET
H406 DOUBLE
H407 DOUBLE w/ BECKET
H082
H083
H092
Max Ld#
SP1852053/16" 1/2" 1"
2640
SP180005 3/16" 5/8" 1 7/16"2640
SP180006 1/4" 7/8" 1 5/8" 4400
H166
TWIST SHACKLE WITH 1/2
TURN PIN
Part #
Pin Dia. Width Length
H167
Max Ld#
SP1700053/16” 1/2” 7/8” 2640
SP170006 1/4” 9/16” 1 3/8” 4400
HARKEN BULLET BLOCKS
FAST SHACKLE
Avibank ball lock pin permanently wired to the shackle
so it won‘t drop in the drink when released.
3062 EACH
Medium size blocks that work well for control lines. Accepts up to 5/16"
line, 2000 pound load, 1 1/8" diameter sheave.
H082 SINGLE
H092 CHEEK
H166 SINGLE w/ SWIVEL
H167 SINGLE w/ SWIVEL & BECKET
LOW STRETCH LINE
Pre-stretched line with superior fatigue and
abrasion resistance. Sold per foot.
RH112WHT 1/12" WHITE
RH018WHT 1/8" WHITE
RH316WHT 3/16" WHITE
RH014WHT 1/4" WHITE
RH516WHT 5/16" WHITE
RH038WHT 3/8" WHITE
WHT
BLU
RED
BLK
H224
Soft matte finish rope. Runs well thru blocks
and fairleads, has good abrasion resistance,
is spliceable and easy to hold with wet
hands. Available in white, black, red, blue.
This rope is not designed for winching. Sold
per foot. Specify color choice.
(White, Blue, Red or Black xxx = color)
RM014WHT1/4" WHITE
RM014XXX 1/4" COLOR
RM516WHT5/16" WHITE
RM516XXX 5/16" COLOR
RM038WHT3/8" WHITE
RM038XXX 3/8" COLOR
RM716WHT7/16" WHITE
RM716XXX 7/16" COLOR
SPECTRA
Rudder Steering and Up / Down control line .
81023001 SPECTRA 1.75 mm
Easy to install shockcord snap hook. No
tools required. Reusable!
2101 HOOK-1/4"
2102 HOOK-5/16"
48
H225
HARKEN MICRO BLOCKS
SPUN DACRON
SHOCKCORD SNAP HOOKS
H233
2101
2102
Small blocks with high load capabilities, but light weight. Accepts up to
1/4" line, 1200 pound load, 7/8" diameter sheave.
H224 SINGLE
H225 SINGLE w/ BECKET
H233 CHEEK
REMOVABLE SHEAVE BLOCK Simply remove the clevis pin that acts as
the sheave axle, slide the sheave out of the
frame, place the frame through the fitting
and reinstall the sheave.
3103 EACH
SUPER STRETCH SHOCKCORD
This midnight-black shockcord has double the
stretch of ordinary cord. If you’ve been getting
your shockcord from the hardware store, you’re
in for a treat. The durable black cover is woven
around an extra-flexible rubber core.
RS018BLK1/8"
RS316BLK3/16"
RS014BLK1/4"
RS516BLK5/16"
RS038BLK3/8"
RS716BLK7/16"
531800113/8” HOG RING
21180000 1/2” HOG RING
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
HARDWARE / TOOLS
CLEATS
HARKEN
CAMMATIC CLEAT
Extra rod stock
available at
no charge
Rounded jaws assure quick cleating/release
action and smoother teeth mean longer life
for your lines.
H471 MICRO CLEAT, CARBO JAW1/8" TO 1/4" LINE
KC WELDER PRO WITH
HOBIE COLOR ROD STOCK
HARKEN WEDGES
Fairleads and eyestraps designed specifically for each Cammatics, the
wedges put the Cammatic on a 15 degree angle for ease of cleating or
releasing. The fairleads are molded into a replacement base. The eyestrap
is designed to be held in place over the cam by the mounting screws.
H297 WEDGE KIT
H284 WIRE FAIRLEAD
H281 EYE STRAP
GERBER NEEDLENOSE
MULTI-PLIER®
80 Watt element, flat tip and a 3/16” hole in tip for rod insertion. Includes
a selection of Hobie color welding rod. Fix holes and cracks or customize
polyethylene products. Insert the rod into the tip and place against the
product to be welded. The tip heats the plastic surface and the rod. As the
materials melt, move the tip along the repair area while pushing the rod
into the tip to fill the repair area with new plastic material. Plug small holes
after moving accessories. Rebuild keels after excessive wear from dragging.
72097001 KC WELDER PRO
STAINLESS STEEL
POCKET KNIVE Needlenose pliers, wire cutter, crimper,
standard/ metric scale, lanyard ring, cross
head screwdriver, bottle/can opener,
serrated sheeps foot blade, large, medium,
and small flathead screwdrivers, file, drop
point blade. Stainless steel construction
with a limited lifetime warranty!
83102 GERBER TOOL
DELUXE - Marlin spike, knife blade, shackle tool,
and screwdriver. 4.0 oz.
1551 DELUXE
TECH TIP!
“WELL NUT” FASTENERS are tubular rubber fittings with an
imbedded brass nut in the base. These are similar to a molly
screw commonly used in sheet rock. They expand within the
structure and give you a virtual backing nut and washer in an
area that is inaccessible. Well nuts can be used for mounting
many accessories to kayaks. Simply drill a hole as a net-fit
dimension for the well nut. Insert the nut and position the
hardware to be fastened. Insert and thread in the screw. Tighten
until very snug. The brass nut is drawn up against the inside surface of the kayak
which expands the rubber to a dimension that is too large to pull through the hole.
HOG RING PLIERS
Cinch rings, hog rings, upholsterers
clamp. They are all the same and these
are the pliers to crimp them with. Use
them on shockcord.
83104 EACH
ItemQty Part
1 172020311 PLANO BOX - KAYAK RIG KIT
1
2
7
Item
3
4
5
8
9
10
6
11
12
13
KAYAK RIGGING KIT - HARDWARE
Set of fasteners for rigging a kayak for fishing accessories. Includes stainless bolts,
nuts, washers, well nuts and more. All packed in a handy Plano box. You can
purchase any of the items separately. Purchase the kit and have it all, or pick and
choose your own based on your individual needs. All included parts are listed
below as well as many more in the numerical section of our catalog.
72020300 KAYAK RIGGING KIT
HOBIEKAYAKS.COM
2 128031191
SCREW 1/4-20 X 1-1/4 PHMS
3 128030111
SCREW 10-32 X 1 PHMS-P SS
4 128030251
SCREW 10-32 X 1" FHMS
5 128030161
SCREW 10-32x1 1/2 RHMS-P SS
6 188080701
WASHER 1/4 X 1 SS HP
7 248080731
WASHER #10 FNDR SS
8 128050111
NUT 1/4-20 HX NYLOCK
9 248050201
NUT 10-32 NYLOCK LOPRO
10 128050221
NUT (WELL NUT) 10-32 x1
118 71110001 PAD EYE-BLK NYLON-3/8"
12 1881029
LINE HANGER
138 78510001 BUNGEE HOOK
49
Loreto – Baja, Mexico
- Jeffrey Fortuna
SUPPORT / LIVEWELL PARTS
HOBIE KAYAK SUPPORT / ONLINE SUPPORT - FAQS - FORUMS
For technical help, contact your dealer, see the Hobie website support area or visit our Hobie kayak user forums.
Our on-line support area and forums include FAQs with many technical and user topics.
Hobie Cat Company hobiekayaks.com / Hobie Australasia hobiecat.com.au / Hobie Kayak Europe hobie-kayak.com
HOBIE KAYAK FAQ
How watertight is my boat? It is normal for any type of kayak to
experience a small amount of see page due to the installation of rivets,
hatches, etc. Kayaks may take on a few cups of water while out paddling. If
a kayak is taking on more than a small amount of water, check to make sure
the drain plug is in, then check the rest of the boat for leaks. Silicone can be
used to seal the rivets. If you have any questions, please call your dealer.
How should I store my kayak? It is best to store your kayak upside
down or standing on end. If hanging your kayak, do not support from the
handles. Best supported by wide webbing straps with the kayak upside
down or on its side.
Is my boat repairable? Hobie kayaks are very durable, however, on
occasion they may need some minor repairs. Linear polyethylene is
repairable. Check with your dealer concerning repairs for your kayak.
Is my boat recyclable? Hobie will recycle your boat when you are done
with it. To recycle a Hobie Kayak, it must be cut up so it fits in a box with
the following dimensions: may not exceed 130” for the length plus girth,
and maximum 108” for the length. Ship the boat to: Hobie Cat 4925
Oceanside Blvd. Oceanside, CA 92056.
HOBIE CAT PARTS - WARRANTY POLICY
HOBIE PARTS WARRANTY Hobie Cat warrants all Hobie Cat
manufactured parts and accessories against failure due to materials or
workmanship defects for a period of one year.
OUTSIDE USA WARRANTY INFORMATION – Regions Outside of the
USA refer to warranty policy statement issued in each country.
OTHER WARRANTY Any accessories and other merchandise sold by
Hobie Cat not mentioned in the paragraph above are not warranted by
Hobie Cat. Said accessories and other merchandise may be covered by
the manufacturer’s warranty, a copy of which can be furnished by Hobie
Cat upon written request.
HOBIE CAT’S OBLIGATION Hobie Cat at its option will repair or replace
without charge any part or accessory which is found to be defective
under the terms and within the period of this Warranty. Buyer must
return the accessory with a sales slip as proof of purchase date.
BUYER’S OBLIGATION Upon discovery of a suspected defect, Buyer
must-at his/her own expense-promptly return the equipment to the
Hobie Kayak dealer for inspection. Warranty is void if equipment is
72021025
LIVEWELL PARTS
72021001BATTERY
72021002 BATTERY CHARGER
72021003SWITCH
72021004 INTAKE TUBE ASSY
72021005 STRAP SET
72021006 BATTERY LID
72021007 PUMP CONNECTOR FEMALE
72021008 PUMP CONNECTOR MALE
72021009 DOWNSPOUT FITTING W/BK RING
72021010 INTAKE 90 DEGREE
72020015 ROD HOLDER - LIVEWELL
72021020 DOWNSPOUT TUBE
72021021 TERMINAL COVER
72021022 ATTWOOD PUMP
72021023 7” INTAKE TUBE (PRO A)
72021025 ELEC CONNECTOR REPL SET
79050211 DRAIN PLUG
72021009
HOBIEKAYAKS.COM
operated after a suspected defect is, or should have been, discovered.
WHO IS ENTITLED TO WARRANTY Only the original Buyer of the
equipment and accessories from Hobie Cat is entitled to warranty.
Warranty may not be transferred.
NO WARRANTY OF USED EQUIPMENT Used equipment is sold AS
IS; Hobie Cat makes NO WARRANTY concerning its merchantability,
condition, durability, age or model year, or fitness for any purpose
whatsoever.
MUTUAL AGREEMENTS It is agreed that this warranty sets forth
Buyer’s exclusive right and remedy against Hobie Cat with respect
to the equipment and accessories. It is in lieu of all other express
warranties and all implied warranties, including implied warranties of
merchantability and fitness. Hobie Cat assumes no other like or unlike
liability for loss of cargo, use, profit or consequential damages of any
kind in connection with the sale, alteration, use, repair or replacement
of equipment or any part thereof.
72021010
72021004
72021001
72021002
72021003
72021005
72021006 / 72021066
NEWER DEEP
72021007
72021008
72021020
72021021
72021022
72020015
51
MIRAGEDRIVE GT / V2
TECH TIP!
HOBIE MIRAGEDRIVE
“GLIDE TECHNOLOGY”
80010501
80013501
80012501
80012101
WHAT MAKES A V2 DRIVE? V2 Drums, V2 Chains, V2
Idler Cable and V2 (Threaded) masts / sprockets
(USED IN 2009 production and newer)
MIRAGE DRIVE GT - ST FINS MIRAGE DRIVE GTi - ST FINS iSeries
MIRAGE DRIVE GTT - ST TURBO FINS
MIRAGE DRIVE GTT PA17 - ST TURBO FINS
81222001
81221001
81222011
81221011
81226001
81227001
81222101
8050111
8080541
Hobie
MirageDrive GT
shown
72020034 PEDAL PAD KIT
PEDAL/CRANK ASSY. (R)
PEDAL/CRANK ASSY. (L)
PEDAL ONLY (R)
PEDAL ONLY (L)
PEDAL STRAP (R)
PEDAL STRAP (L)
CAP - PEDAL
NUT
WASHER
81236001 PEDAL ADJ ASSY INCLUDES:
81240001 PLASTIC HANDLE
81230001PIN
8031201SCREW
81242001SPRING
8034071 ALLEN WRENCH
81172001 PEDAL
ADJUSTMENT DECAL
81055001 SPROCKET GUARD FWD
8031451SCREW
81050001OUTHAUL BLOCK
8020041 CLEVIS PIN
10860001LOCK RING
81181001 SPINE
NEW 2013
81129001 SPROCKET V2 THREADED (W/ FWD GUARD)
81127001 SPROCKET GT THREADED (W/ FWD GUARD)
81080001 SPROCKET SHAFT
53170020 SET SCREW
COMFORT FIN
ST FIN
ST TURBO FIN
81163001 MAST V2 THREADED
81198101 MAST / ST TURBO V2 THREADED
8000341 LOC-TITE .5ML
81190001
UPDATE KIT - V2 SPROCKET
(2 V2 SPROCKETS AND 2 V2 MASTS)
81129022 V2 STANDARD MAST KIT
81129122 V2 TURBO MAST KIT
81193001
(GRY/BLK)
81193021
(RED/BLK)
81192001
(GRY/BLK)
81193031
(BLU/BLK)
81192021
(RED/BLK)
81192031
(BLU/BLK)
52
UPDATE KIT - GT SPROCKET
(2 GT SPROCKETS AND 2 V2 MASTS)
81129023 GT STANDARD MAST KIT
81129123 GTT TURBO MAST KIT
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
OLDER DRIVES
81173001DRUM V2
81175001DRUM GT
HOBIE MIRAGEDRIVE “V2” / “GT”
81155001 BOLT
81121001 IDLER PULLEY
81123001 IDLER PULLEY GT
81202001CHAIN ASSY V2
8050111NUT
81203001 IDLER CABLE V2 (18.5”)
8050111 NUT
81090001 DRUM SHAFT
V2 FITS ALL MODELS
DRIVE SEAL
81037001STD
81038001I - SERIES
8031581SCREW
8080461WASHER
53170020 SET SCREW
81095001 DRIVE ALIGNMENT PIN 2012+
HOBIE MIRAGEDRIVE "V1" (V1 PARTS LIMITED TO STOCK ON HAND)
Drive with older plastic drum, plastic spine, Sprocket / mast connection is a set-screw
81171002 V1 to V2 UPDATE
KIT V2 DRUMS, CHAINS, IDLER
81110001 PULLEY SHAFT
TECH TIP!
MAINTENANCE AND TUNING - Maintenance and tuning information
for MirageDrives is available on the Hobie Cat website support area.
Click the kayak model name then see Care and Maintenance.
81155001BOLT
8050540NUT
Direct link to the support pages for kayaks is here:
http://www.hobiekayaks.com/support/
81171001 V1 DRUM
IDLER CABLE - 14 1/4” NLA
8050111NUT
8050111 NUT
81128001 V1 SPROCKET
53170020 SET SCREW
UPDATE KIT - V2 SPROCKET
(2 V2 SPROCKETS and 2 V2 MASTS)
81129022 V2 STANDARD MAST KIT
81129122 V2 TURBO MAST KIT
V1 Sprocket / mast connection
uses a set-screw
81160001 OLDER / V1 MAST / STD
81198001 OLDER / V1 MAST / ST TURBO
MIRAGEDRIVE SPARE PARTS KITS
Spare parts kits include a fin, mast, sprocket, chain and appropriate parts for the drive
version. Older drives have sprockets and masts that use a set screw connection. V2 drives
use threaded sprockets and masts. All in a handy zippered pouch. Don’t waste a day on
the water when your MirageDrive could be easily repaired. Available for the standard fin
drive or a drive with the ST Turbo fins. Standard kit shown.
MIRAGEDRIVE V2 (THREADED MAST)
80010301 KIT V2 COMFORT FIN
80013301 KIT V2 TURBO FIN
MIRAGEDRIVE GT (THREADED MAST)
80010401 GT ST (Bearing Sprocket)
80013401 GT TURBO (Bearing Sprocket)
HOBIEKAYAKS.COM
HOBIE MIRAGEDRIVE—
OLDER—
Original drive with aluminum spine, stainless
sprocket / mast connection is cotter key.
Limited parts available.
81130001
81340001
8060111
8020061
10860001
81211001
81150001
81105001
SPROCKET (STAINLESS)
SPROCKET BUSHING (SS SPKT)
COTTER KEY (MAST / SS SPKT)
CLEVIS PIN
LOCK RING
IDLER CABLE 14 3/4” (SOLID PULLEY)
DRUM BUSHING (ALUM DRUM)
CRANK ARM RIGHT, THREADED
53
PARTS - FORWARD
72104001 HOOK
80012001 PEDAL RETAINER BUNGEE w/ HOOK
71301001 HATCH SEAL "TRIM-LOC"
(TOP MOLDED) 5’ REQ
71302001 HULL FLANGE SEAL (PRE 2012 ADV)
"TRIM-LOC" (SIDE GLUED) 5’ REQ
84560001 MAST RECEIVER COVER
8031151 SCREW
84550001 MAST RECEIVER
81450001 HOBIE CHEEK BLOCK
SEE MIRAGEDRIVE PAGE
FOR DRIVE DETAILS
71220001 METAL PAD EYE
8030071 SCREW
76050001 BOW/ STERN HANDLE
72542001 DOME STICKER 1.75”
38120031 PUSH-IN CAP (White)
(Underside Of Hull)
74075001 PADDLE 2-PEICE FIBER SHAFT 230 CM
74090001 PADDLE 2-PEICE FIBER SHAFT 260 CM
(Only sold as matched set)
74076101 BUTTON PLASTIC
74076102 BUTTON SS
10730000CLEAT
8030111SCREW
230cm
72103001 SHOCKCORD END
8031130 SCREW
74030002 DRIP RING FG SHAFT
74030001 DRIP RING ALUM SHAFT
74010001 REPLACEMENT BLADE RIGHT
74011001 REPLACEMENT BLADE LEFT
74049001 PADDLE “T” HANDLE
81535001 MIRAGE CASSETTE PLUG
54
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
PARTS - FORWARD
RUDDER - UP / DOWN
78560001 MESH STOWAGE POCKET
8031501SCREW
78561001 HOOKLESS STOWAGE POCKET
8004531 LINE (BLK)
81450001 HOBIE CHEEK BLOCK
8031065 10-32 x 7/8 SCREW
8031069 10-32 X 1-1/4 SCREW (AI)
8050211NUT
10730031 "PORT"
SHOWN
81408101 HANDLE
81406101 HANDLE CAP - UP
81407101 HANDLE - DOWN
81408001 OLDER HANDLE
81406001 OLDER DECAL - UP
81407001 OLDER DECAL - DOWN
10730021 CLEAT STBD
10730031 CLEAT PORT
8031541SCREW
OLDER UP / DOWN
81392001 TWIST AND STOW CONTROL ARM UP/DOWN
81380001 OLDER - CONTROL ARM UP/DOWN
81375001SPRING
8080691 NYLON WASHER
81035011 BOLTED HANDLE AND CONTROL ARM KIT
81035001 UP / DOWN HANDLE
W/ SET-SCREW
RUDDER - STEERING
8031570 SCREW / PADDLE KEEPER BUNGEE
79538201WEB PULL TAB
STEERING CRANKS
81014001 SPORT/REV 11
81016001 REV 13 / OB
81017001 OUTFIT / OASIS
88991281 CRANK - AI 2011+/TI
81611201 (R)
STEERING
81013001 STEERING HANDLE
8030126SCREW
88991152STICKER
81385001WASHER
88991235PIN
H071SPRING
81611101 CLICK AND GO ASSY (L)
81611201 CLICK AND GO ASSY (R)
88991355 KNOB ASSY
(Handle not included)
8030791SCREW
(REQUIRES 3/16" allen "BALL-END" wrench)
81602101 SPRING CLICK AND GO LEFT
81602201 SPRING CLICK AND GO RIGHT
2008 AND OLDER
81410001 CAM LOCK KNOB
OLDER STEERING
81015001 STEERING HANDLE
W/ SET-SCREW
81372001 CRANK AI-OUTFIT
H071SPRING
8080691 NYLON WASHER
BOLTS VARY BY MODEL
HOBIEKAYAKS.COM
55
PARTS - SEAT / CARGO
OLDER MIRAGE SERIES SEAT
2015 MODEL SEATS SHOWN ON PAGE 66
81269001 MIRAGE BACKREST - TWIST LOCK
71190001 WEBBING LIFT HANDLE (PLASTIC END)
71190000 WEBBING LIFT HANDLE (WEB WITH HOLE)
8032011 SCREW
8080571 WASHER
81268001 MIRAGE BACKREST - EXPAND PEG
81259001 SEAT STRAP w/ HOOK
76055001 MIDSHIP HANDLE
8032011 SCREW
88991061 MIDSHIP HANDLE
8032011 SCREW
81277001 HANDLE
81245001 ROLL PIN
81276001 TWIST-LOC
81276201 TWIST-LOC SEAT KIT (PAIR)
(Fit Older Seat Into Twist Loc Hull)
81275001 TWIST-LOC RECEIVER* (IN HULL)
* REPLACEMENT PART ONLY - NOT
RECOMMENDED AS AN UPGRADE
OLDER SEAT PEGS
81265101 SEATBACK
ADJUSTABLE PLUG KIT (PR)
81265001 SEATBACK PLUG
8031131SCREW
8080541WASHER
PADDLE SERIES SEAT
10092030 PLUG
(Seat area of Adventure,
Kona, Outfitter, Revolution)
72009001 Scupper plug
(Pursuit/ Maui/ Lanai)
72402001 SEATBACK / PADDLE MODELS 2010
72409001 SEAT STRAP W/HOOK
56
LOWER SPEED DRAIN ASSEMBLY
FAIRING, O-RING, SHOCK CORD
71114001 OUTFITTER-FRT
71114002 SPORT-OASIS-TI
71114003 REVO 11 FRONT
71114004 REVO 13 FRONT
71114005 REVO 16
71114006 OASIS FRONT
--71113001 DRAIN PLUG
8004531 BLK LINE (2’)
71122001 CLEAT - SCREW IN
81408101 HANDLE
81401401 HANDLE CAP “DRAIN”
72010 Scupper plug
(Odyssey)
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
PARTS - SEAT / CARGO
41220001 EYELET POST
8031131SCREW
8011231RIVET
53180011 3/8” HOG RING
21180000 1/2” HOG RING
78520001 EYELET HOLD DOWN
8032121 SCREW
71110001PADEYE
8030031SCREW
8012001RIVET
71120001 LASHING HOOK
8030031 SCREW
78510001 BUNGEE HOOK
8031961 SCREW
RS018BLK 1/8” SHOCKCORD
RS316BLK 3/16” SHOCKCORD
RS014BLK 1/4” SHOCKCORD
79538201 WEB PULL TAB
2101 SHOCKCORD FASTENER, 1/4”
HATCHES
71130001HATCH 5” SCREW-IN
8031501SCREW
71701011HATCH 6” TWIST AND SEAL
71701001HATCH 6” TWIST AND SEAL RETRO KIT
71321001FLANGE GASKET
71701021LID O-RING
8031131SCREW
71702011 HATCH 8” TWIST AND SEAL
71702001 HATCH 8” TWIST AND SEAL RETRO KIT
71331001 FLANGE GASKET
71702021 LID O-RING
8031131SCREW
71230001 ROD HOLDER COVER
8031131 SCREW
TECH TIP!
DECK FASTENERS - Customize your boat with the fasteners of your choice... where you
want them. The Hobie screw-in fittings can be easily removed and replaced. Add an extra
eye where we placed a hook, a cleat hook where a shockcord end is placed... You choose
what works best for you. Use tool #71115101
SCREW-IN FITTINGS
72012001 SCUPPER PLUG
(QUEST / KONA / OUTBACK)
HOBIEKAYAKS.COM
71116001
PADEYE
71125001
PADEYE XL
71117001
71115001
CLEAT
SHOCKCORD END
71124001
PLUG SOLID
71115101
TOOL SCREW IN
FITTINGS
57
PARTS - REAR / RUDDER
TECH TIP!
10091000 DRAIN PLUG W/ O-RING
10092025 O-RING
MAINTENANCE AND TUNING - Maintenance and tuning
information for Twist and Stow rudder systems is available on
the Hobie Cat website support area.
http://www.hobiekayaks.com/support/history/
79050211 DRAIN PLUG W/ O-RING
79050212 O-Ring
Direct link to the support pages for kayaks is here:
http://www.hobiekayaks.com/support/products/kayaks/
81394001 RUDDER PIN
81394021 RUDDeR PIN 2011 CENTERLINE
STYLE REQUIRES MODIFIED HOUSING
81391011 GUDGEON
8030214 SCREW (2)
71280001 KEEL GUARD LANAI, KONA, QUEST, ODYSSEY
8030231 SCREW (2)
LINE AND TUBE ASSEMBLY
80025001 LINE CONTROL ASSY. LINE IN TUBE WITH END CAPS (1)
80020001 UNIVERSAL LINE REPLACEMENT KIT
(SET OF 4 AND ADDITIONAL LINE)
81023001
8063001
81400001
81405001
81405101
TWIST AND STOW RUDDER
8080791 WASHER
8030641 SCREW
81399001 BOLT
81399101 CAP
SPECTRA CONTROL LINE
SWEDGE
TUBING
TUBE HOLDER
END CAP
8050211 NUT
TWIST AND STOW
RUDDER ASSEMBLY
81395001 SM BLADE
81396001 LG BLADE
8030281 SCREW
EARLY RUDDER PARTS
NYLON RUDDER PIN
81361001 CLASSIC
81362001 OLDER OUTBACK
81362001 OLDER SPORT
81362001 OLDER TANDEM
20860000 LOCK RING
81360001 S.S. RUDDER PIN
81350001
RUDDER MOUNT
8030171 SCREW
8080541 WASHER
RUDDER BLADE
81395201 SM
81397001 LG
81390001 RUDDER BLADE
58
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
MODEL SPECIFIC PARTS
QUEST
MIRAGE CLASSIC
QUEST TWIST AND STOW RUDDER KIT
78501 QUEST 13
78502 QUEST 11
37380001 CLAM CLEAT
61070000 CLEAT
8031131 SCREW
8" HATCH
78540001 TRACK / FOOT BRACE
78535001 FOOT BRACE / LEFT
78536001 FOOT BRACE / RIGHT
MIRAGE CLASSIC &
PURSUIT
71301001 LOC SEAL, 6.5FT
91281000 DRAIN SCREW
HOBIE MIRAGE i - SERIES
79050214 SCUPPER PLUG
79052007 SEATBACK / I-SERIES
79050061 I-SERIES CASSETTE PLUG
79050021 CLICK AND GO SPRING
79050011 CLICK AND GO LEVER
79052017 VALVE ASSY
81394001 RUDDER PIN
81395201 SMALL RUDDER BLADE
81395001 RUDDER ASSY. W/ SM. BLADE
76050001 BOW / STERN HANDLE
79050211 DRAIN PLUG W/ O-RING
79052019 PADDLE HOLDER
79052006
79052001
71702011 HATCH 8” TWIST AND SEAL
71331001 FLANGE GASKET
71702021 LID O-RING
8031130SCREW
74077001 PADDLE 4 PC ALUMINUM SHAFT
79052015 and 16
80012001 PEDAL RETAINER BUNGEE W/ HOOK
79052009
72023042 RAM BOND-A-BASE
For attachment of rod holders and other accessories to Hobie Mirage
inflatable kayaks. Order glue seperatly (79052018).
79052009 i – HULL REPAIR KIT
Includes 2 colors of repair vinyl and glue, valve tool and instructions.
Repair or customize a Hobie Mirage Inflatable kayak.
79052006 i – HARDWARE ACCESSORY KIT
Includes padeyes, spare cleats and glue. Customize your Hobie inflatable.
79052005 i – ELECTRIC INFLATION PUMP
Electric pump connects to car 12v outlet. Quickly and easily fill your Hobie
inflatable. This is a high volume / low pressure pump. Use the standard
pump to bring chambers to full pressure.
79052001 i – CUP HOLDER KIT
Includes 2 flexible can / cup holders and glue. Customize your Hobie
inflatable.
80045101 i - KAYAK CART “PLUG-IN” 79052015 i – TRI RING KIT / SAGE
79052016 i – TRI RING KIT / SUNDANCE
Includes 2 “Tri” rings mounted on round patches ready for installation.
Customize your Hobie inflatable.
HOBIEKAYAKS.COM
79052003 i – STANDARD INFLATION PUMP
Standard hand pump for Hobie inflatable.
79052010 i – 12 TRAVEL BAG
79052011 i – 14 TRAVEL BAG
79052012 i – 9 TRAVEL BAG
59
ADVENTURE ISLAND
SEE PREVIOUS PAGES FOR THE PARTS
IN COMMON WITH MIRAGE KAYAKS
H233 CHEEK BLOCK
8030151 SCREW
8080500 WASHER
8050211 NYLOCK NUT
79510201 MAST / SAIL BAG -2014
79510221 MAST / SAIL BAG 2015+
AMA 2007-2014
99303001 AMA PAPAYA
99304001 AMA HIBISCUS
99304101 AMA NEW RED
99305001 AMA DUNE
AMA 2015+
99303501 AMA PAPAYA
99304501 AMA HIBISCUS
99305501 AMA DUNE
H424B
H471
V2 UPDATES
81412001 V2 AKA CASTING GLUE KIT
FAIRLEAD
CLEAT
8031481SCREW
79531101 CLEAT WEDGE W/ FAIRLEAD
79531111 MAIN CLEAT WEDGE
8004381 (12’) FURLING LINE
79520301 AKA END CAP
79526211 PADDLE WEBBING
AMA
AKA
XBAR
79502001 DAGGER BOARD
79520201 AKA COLLAR
8010181RIVET
79545001 AMA “HOBIE”
DOME LOGO
AKA BRACE
79501001 FOAM PLUG /
DAGGER WELL
81391002
RUDDER UP/DOWN
“T” HANDLE LINE KIT
UPGRADE FOR
EARLY BOATS
79525001 BALL / BRACE
8030212 SCREW
79537001
BRACE RETAINER CLIP
79538101 PADDLE HOLDER KIT
79538001 PADDLE RETAINER CLIP
79535001 AKA (v1) CONNECTOR PIN
RS316BLK3/16" SHOCK CORD (9")
53180011 HOG RING
38670011 "S" HOOK
H082 BULLET BLOCK
79526001 AKA V1 CARRY BAG
79526002 AKA V2 CARRY BAG
H083 BULLET BLOCK W/ BECKET
RMO14BLK MAINSHEET (33’)
OLDER MODELS
81396001 TWIST AND STOW RUDDER ASSY / LG BLADE
81397001 LARGE SAILING RUDDER BLADE
SEE RUDDER PAGE FOR TWIST AND STOW DETAILS
60
80019012 LINE KIT ISLAND CONTROL REPLACEMENT
*RUDDER UPDATED SPRING 2011
CURRENT RUDDER SHOWN ON TANDEM ISLAND PAGE
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
ADVENTURE ISLAND
V1 AKAS & CROSSBARS SHOWN
2011 MODEL YEAR+ = V2
88991311 MAST CAP
79511021 MAST CAP (OLDER SWIVEL)
CROSSBAR / AKA / AKA BRACE
79510001 '07 MAST ISLAND (2 PC)
79510011 '08-14 MAST ISLAND (2 PC)
79510015 ‘15+ MAST ISLAND (2 PC)
91011001 BATTEN CAP 3/16”
88999519 BATTEN CAP 3/8”
RH112WHT BATTEN TIE LINE (REQ 18” PER)
2007-2014 (3/16”)
91051011 BATTEN 9' 2"
91041011 BATTEN 7' 8.5"
AI V1 2007-2010
79531001 XBAR AI V1- FWD 2007-2010
79530001 XBAR AI V1- REAR 2007-2010
8030781 SOC CAP SCREW
79520001 AKA AI V1 - FWD 2007-2010
79521001 AKA AI V1- LT REAR 2007-2010
79522001 AKA AI V1- RT REAR 2007-2010
79523101 BRACE ASSY AKA AI V1 -22”
2015- (1&2 3/16” 3 3/8”)
795042 BATTEN 1 - 14’
795043 BATTEN 2 - 9’ 7 1/4”
795044 BATTEN 3 - 4’ 10 5/8”
2007-2014 SAILS
79516001
SAIL PAPAYA/TURQ/WHT - BREEZE
79515001
SAIL RED/GRAY/WHT - SMOKE
79546001
SAIL ADV WHT/GRAY/TURQ - AZUL
AI V2 2011-2014
79512601 XBAR AI V2 - FWD 2011-2014
79512701 XBAR AI V2 - REAR 2011-2014
79512301 AKA AI V2 - LT FWD 2011-2014
79512201 AKA AI V2 - RT FWD 2011-2014
79512401 AKA AI V2 - LT REAR 2011-2014
79512501 AKA AI V2 - RT REAR 2011-2014
79523201 BRACE ASSY AKA AI V2 -23”
AI V2 2015-
2015- SAILS (SHOWN)
795465
SAIL ADV WHT/GRAY/TURQ - AZUL
795475
SAIL RED/GRAY/WHT - SMOKE
795485
SAIL PAPAYA/TURQ/WHT - BREEZE
22080011 BATTEN LUFF CAP SET
79104201 XBAR AI V2 - FWD 201579104101 XBAR AI V2 - REAR 201579503901 AKA AI V2 - LT FWD 201579503801 AKA AI V2 - RT FWD 201579503701 AKA AI V2 - LT REAR 201579503601 AKA AI V2 - RT REAR 201579523301 BRACE ASSY AKA AI V2 2015-21”
AI V2 CROSSBAR PARTS
79512001
FURLER DRUM AI
79511101
MAST BASE / HOLE TYPE
79510721 V2 XBAR CLAMP TOP
79510731 V2 XBAR CLAMP BOTTOM
8032088 SCREW
8080561WASHER
79532001 V1 MAST RETAINER SPRING
'07 BASE
79532201 EDGE GUARD
8030335 SCREW (MAST RECEIVER ATTACH)
8050111 NUT (MAST RECEIVER ATTACH)
8090900CAPPLUG
79533001 MAST BEARING PLATE (REQ 2)
8031231SCREW
8050801NUT
90610111 BEARINGS (EA / REQ 24)
COLLAR KIT
79511001 MAST BASE / ‘07 PIN TYPE
79510101 MAST BASE COLLAR KIT
79514101 MAST RECEIVER
8030261 MOUNTING SCREW (6)
8080211 WASHER (6)
71320001 GASKET
79513001 BACKUP RING
79551001 LEVER / LATCH
8031151 SCREW
79555001 SPRING
79552001 MAST STEP PIN PLATE
8032011 MAST STEP PLATE SCREW
BRACE ASSY PART # SEE CHART ABOVE
79524001
79523001
81242001
8030781
CAP / AKA BRACE LOCK
SOCKET / AKA BRACE LOCK
SPRING / AKA BRACE LOCK
SOC CAP SCREW
HOBIEKAYAKS.COM
8032081 SHEAR BOLT (DRILLED)
8052081NUT
20860000RING
88991221 BRACE CONNECTOR
8020381 CLEVIS PIN
20860000 SPLIT RING
37661091LANYARD
79517001 V-FRAME STRUT
79519001 V-FRAME TURNBUCKLE
8050111 NUT
79518001 V-FRAME BASE
88991215 SET SCREW
61
TANDEM ISLAND-2014
RUDDER PARTS
2015-LATER MODEL INFORMATION ONLINE - SUPPORT
88991094 GUDGEON (3 HOLE)
CURRENT
8030214 1/4-20 SCREW (2)
8030355 5/16-24 SCREW (1) LOWER
88991303 AMA PAPAYA
88991304 AMA HIBISCUS
88991314 AMA NEW RED
88991305 AMA DUNE
AMAS AVAILABLE WITH 2015+
BOW SHAPE ONLY
OLDER (2 HOLE GUDGEON)
8030214 1/4-20 SCREW (1 ) (OR 2*)
8030346 1/4-20 STUD-NUT HEAD PH17-4 (1) LOWER
*OLDEST, LOWER LATER REPLACED BY
8030346 STUD (STRONGER FOR 2 HOLE)
88991101 RUDDER PIN
20860000RING
88991092 RUDDER HOUSING
88991093PULLEY
88991091BLADE
88991099 RUDDER UP STRAP ASSY
82420001 RUDDER COVER AI / TI
79520401 AKA LEFT REAR
MAINSHEET SYSTEM
38670011 "S" HOOK
H083
BLOCK-BULLET w/ BECKET
RM014BLK LINE (57')
H2655
BLOCK, 40mm CARBO FIDDLE
H2131
SHACKLE W/PIN 5/32”
88523101 AKA BRACE ASSY (L)
88991061 HULL LIFT HANDLE
8032011 SCREW
88991301 STEERING HANDLE
88991235 ROLL PIN
8030125 SCREW
88991151 STICKER
88991355 (2011) STEER KNOB ASSY
79530201 XBAR REAR ASSY
RUDDER REPLACEMENT SPRING 2011 (88991098)
CONTACT DEALER FOR REPLACEMENT RUDDER DETAILS
IF YOU ARE USING TWIST AND STOW SYSTEM
81051001 1,000 LB UP CONTROL LINE
88523102 AKA BRACE ASSY (R)
79520501 AKA RIGHT REAR
62
88991001
88991021
88991031
8031461
8030671
88991011
8030071
81242001
88991041
8040401
88991150
CENTERBOARD
PIN
PIN HOLDER
SCREW
SCREW
COVER
SCREW (4)
SPRING
KNOB
BOLT
CAP
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
TANDEM ISLAND
88991311 MAST CAP
88991121 MAST TANDEM ISLAND (2 PC)
88998514 SAIL DUNE -2014
88998515 SAIL SMOKE -2014
88998516 SAIL BREEZE -2014
79510202 MAST / SAIL BAG
88995511 SAIL DUNE 2015+
88995512 SAIL SMOKE 2015+
88995513 SAIL BREEZE 2015+
88998521
88999519
88998522
88998523
91011001
BATTEN #1 (3/8" 186" W/ CAP)
BATTEN CAP 3/8"
BATTEN #2 (3/16" 42 1/2" W/ CAP)
BATTEN #3 (3/16" 39 1/2" W/ CAP)
BATTEN CAP 3/16"
BATTEN LEECH CAP
79520311 AKA FWD (L/R)
RH112WHT BATTEN TIE LINE (REQ 18” PER)
22080011 BATTEN LUFF PROTECTOR CAP SET
79520601 AKA SPRING HOOK
79522201 AKA LOCK BEARING
8031401SCREW
79510721 XBAR CLAMP TOP
79510731 XBAR CLAMP BOTTOM
8032088SCREW
8080561WASHER
88991071 FURLER DRUM TI
79533001 MAST BEARING PLATE (REQ 2)
8031231SCREW
8050801NUT
90610111 BEARINGS (EA / REQ 24)
8004381 (12') FURLING LINE
79511101 MAST BASE
79514101 MAST RECEIVER
8030261 MOUNTING SCREW
8080211 WASHER
71320001GASKET
79531201 XBAR FWD ASSY
79532201 EDGE GUARD
88991271 SPACER BLOCK
8030451 SCREW (CUP ATTACH)
8050111 NUT (CUP ATTACH)
79513001 BACKUP RING
8032011 MAST STEP PLATE SCREW
79520311 AKA FWD (L/R)
88991191 V-FRAME STRUT
88991211
V-FRAME
TURNBUCKLE
71125501
AKA DOUBLE SHOCK CORD ASSY
8050111 NUT
88991201 V-FRAME BASE
88991215 SET SCREW
HOBIEKAYAKS.COM
63
PRO ANGLER 14 (SEE 2013 FOR CHANGES)
ROD HOLDER STORAGE
84500911 3 ROD HOLDER ASSY LEFT
84500921 3 ROD HOLDER ASSY RIGHT
84502001 MOUNTING BOARD, RT
84502101 MOUNTING BOARD, LT
8030341SCREW
8032085SCREW
8050111 NUT
84504501 HANDLE - BOW
8030361 SCREW SOC CAP
79545001 "HOBIE" DOME LOGO
71305001 HATCH SEAL
LARGE BULB (7.25’)
84501901 HATCH LINER FWD - PRO ANGLER
84502401 FLOOR MAT RT
84502501 FLOOR MAT LT-BLK
72020311 PLANO BOX - SMALL YELLOW
72020321 PLANO BOX - MEDIUM BLUE
72020331 PLANO BOX - LARGE RED
81536001 CASSETTE WELL PLUG - PA/OUTBACK
STEERING (PRO A)
REVERSIBLE ASSY KIT INCLUDES
ALL PARTS TO REPLECATE
2011 STEERING ON OLDER
MODELS. MOUNT ON PORT OR
STARBOARD SIDES
84506201
84505001 STORAGE BUCKET ASSY
(INCLUDES COMPARTMENT WITH DIVIDERS)
84505101
84505201
71301001
8004531
STORAGE BUCKET COMPARTMENT
REPLACEMENT COMPARTMENT DIVIDERS
(SET OF 7)
TRIM LOC TOP MOLDED 3.5’
CONTROL LINE (9’)
81408101 HANDLE
81406101 INSERT - UP
84502201 CUTTING BRD, CNTR, BLACK
8030071SCREW
8050111NUT
84502211 BUNGEE AND FITTING ASSY
84500601 COVER PLT, RDR SYSTEM
8030151 SCREW (4)
84500801 TUBE RESTRICTOR (2)
84500501 STEERING DRUM (PIN TYPE OLDER)
8060141 COTTER KEY (REPL ROLL PIN)
84500502 STEERING DRUM (SCREW TYPE)
8030126SCREW
88991235PIN
84500401 RDR MOUNT, UNDER HULL (PIN TYPE OLDER)
84500402 RDR MOUNT, UNDER HULL (SCREW TYPE)
84500201 RUDDER HOUSING, UNDER HULL
84502301 SISTER SCREW, PRO RDR ASSY
8031490 SCREW SCREW 8-32 X 1/2 FHMS-P
84504001 TORSION SPRING, RUDDER
84500101 RUDDER BLADE, PRO A
84612001 RUDDER BLADE, LARGE PRO A
64
84500001 SEAT ASSEMBLY - PRO ANGLER
84500011 LUMBAR SUPPORT PAD
84502901 KNOB, SEAT FRAME FRONT
8031811 STUD (FWD)
8042151 BOLT SHOULDER (REAR)
84500021 SEAT STRAP ASSY (ONE SIDE)
8011231RIVET
84500031 STAINLESS REPLACEMENT BUCKLE
84504101
84504401
8031781
84504301
UNIVERSAL SIDE HANDLE ASSY
HANDLE END FITTING
SCREW SOC CAP
DECAL, RULER
71996001 BOTTLE/CAN HOLDER
74035001 FOLDING PADDLE CLIP
71702011 HATCH 8” TWIST AND SEAL
84504201 TUBE, STERN HANDLE
84504401 HANDLE END FITTING
8031781 SCREW SOC CAP
72013001 SKID GUARD, PRO
8030641SCREW
10091000 DRAIN PLUG
80019011 LINE KIT PRO ANGLER
CONTROL REPLACEMENT
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
PRO ANGLER 12 / PRO ANGLER 14 (2013)
84504501 HANDLE BOW
8030361 SCREW SOC CAP
79545001 “HOBIE” DOME LOGO
84507771 ANCHOR TROLLEY INSERT CAPS
84501211 2 ROD HOLDER ASSY PA12 LT
84501221 2 ROD HOLDER ASSY PA12 RT
84502001
84502101
84502011
84502111
MOUNTING BOARD RT
MOUNTING BOARD LT
MOUNT BOARD, 2015+, LT BLK
MOUNT BOARD, 2015+, RT BLK
8030341 MOUNTING BOARD SCREWS
86506601 FLOOR MAT PA12 LT
86506701 FLOOR MAT PA12 RT
88991301 STEERING HANDLE
86505401 SECONDARY STEERING HANDLE
88991235 ROLL PIN
8030125SCREW
88991151STICKER
84619001 STEERING RISER
8032211 SCREW, STEERING RISER
86505001 STEERING CRANK
86505101 STEERING CRANK SUPPORT
8031065SCREWS
8050211NUTS
81244001 STEERING SPRING
86505121 DUAL STEERING LINE ASSEMBLY
80019011 LINE REPLACEMENT KIT
84507601 CHAIR FOOT MOUNT
CHAIR FOOT MOUNT SCREWS
84508001
8032241
84500821
8030151
VANTAGE KICKSTAND ASSEMBLY
KICKSTAND MOUNTING SCREW
KICKSTAND WEBBING ASSEMBLY
WEBBING SCREWS
86505601 LOWRANCE READY COVER PLATE
8030671 COVER PLATE SCREWS
86506001 LOWRANCE ADAPTER
86506101 LOWRANCE STAR MOUNT ADAPTER
84505901 HUMMINBIRD ADAP KIT
86506201 TRANSDUCER SUPPORT CLIP
86509501SCREW
8050211NUT
41220001EYELET POST
8010131RIVET
84501201 HATCH LINER, PA12
72020321
72020331
71305001
PLANO BOX - MEDIUM BLUE
PLANO BOX- LARGE RED
HATCH SEAL LARGE BULB
PA12 - 5.16’ / PA14 - 7.25’
71707001
71707002
8032121
71708001
8004531
RECTANGULAR HATCH TWIST AND SEAL
FLANGE GASKET
SCREWS (14)
TACKLE MANAGEMENT RACK
TACKLE MANAGEMENT LINE (14” CL)
71709001 BUCKET, HOBIE RECTANG HATCH
81408101
81401101
81401001
81401201
81401401
8004531
HANDLE
CAP, RUDDER
CAP, SEAT
SKEG
DRAIN
CONTROL LINE (9’)
84507721 UNDER SEAT PAD
84501231 UNDER SEAT TACKLE BOX WEBBING ASSY
8030151SCREWS
84504601 PA12 SIDE CARRY HANDLE
84504901 DECAL RULER PA12
71996001 BOTTLE/ CAN HOLDER
H-RAIL PARTS
84615
STEERING HANDLE MOUNT
84617MOUNT
846143
SIDE TUBE, H-RAIL PA12/14
84611001 TUBE, REAR HANDLE
84504401 HANDLE END FITTING
86505611 THRU HULL PLUG
(INCLUDES PLUG, NUT AND O-RING)
86505701 RUBBER ADAPTER PLUGS
86505621 THRU HULL WIRING KIT
(INCLUDES 2 PLUG, ADAP TREE)
86505613
3 WAY PLUG THRU HULL KIT
(NOT SHOWN)
HOBIEKAYAKS.COM
71119001 PADDLE CLIP PA12
71702011 HATCH 8” TWIST AND SEAL
72013001 SKID GUARD, PRO
8030641SCREW
10091000 DRAIN PLUG
84504801 TUBE STERN HANDLE, BLUE GREY
84504401 HANDLE END FITTING
8031781 SCREW SOC CAP
65
VANTAGE ST / XT / CT SEATS
84507501
VANTAGE ST (PA12 & 14)
84507501 VANTAGE SEAT
84507551BACK CONTROL LINE
84507561BOTTOM CONTROL LINE
84507521 BACK FRAME ASSEMBLY
84507801 REPLACEMENT FABRIC KIT
84507711ARM REST PAD PACK
84507581 BOA LINE ASSEMBLY
84507611 TRIANGLE RING
84507531 BOTTOM FRAME ASSEMBLY
84507541 ARMREST FRAME ASSEMBLY
84508201
80503701
84507761
84507791
PIVOT BOLT
ACORN NUT
INNER SPACER
OUTER SPACER
84507571CHAIR FEET
8010181 RIVETS
40590001 LOCKING KEY
RS316BLKBUNGEE 6” CL
84507800DECAL, VANTAGE CHAIR
84507861 FABRIC PROTECTOR COVER WITH PADEYE
84507851 FABRIC PROTECTOR COVER
8030671 SCREWS FOR FABRIC PROTECTOR
FIGHTING CUP KIT - VANTAGE CHAIR
Gimbled fighting cup holds your rod butt as you fight a fish.
Take some of the load off your arms! Mounts directly to the
Vantage ST or XT chair. All required parts included.
72020066 FIGHTING CUP KIT VANTAGE CHAIR
86507501
VANTAGE XT (PA17)
For Vantage XT support issues, parts
diagrams, videos on function, see
hobiecat.com/support
84507821
VANTAGE CT (2015 MIRAGE MODELS)
84507701
VANTAGE CT (ISERIES MODELS)
For Vantage CT support issues, parts
diagrams, videos on function, see
hobiecat.com/support
865092 MESH SEAT BACK
865126 MESH SEAT BOTTOM
865140 SCREW
865101 WEB HANDLE
865118 GEAR ASSY FRONT UP/DOWN
84507822 VANTAGE CT SEAT CLIP UPGRADE
66
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
OS = Oversized item / Additional handling charges apply
PartDescription
334 AIR FLOW TELS, RED / GREEN
370 SHOCK CORD BALL TIES
376 SILICON RTV 100% 3 OZ.
615 BOOK, PENGUIN BOAT FLIPPERS
1266 RESCUE STEP - BOAT
1551 KNIFE, DLX STAINLESS
1603 MAGICA RUST REMOVER GEL 8 OZ B
1619 TRAMP CLEANER,SEASPRAY
1662 TAPE, SAIL REPAIR 2”X 25’ ROLL
1665 REPAIR KIT, SAIL
2082 SCALE - DOWN HAUL / FISH
2101 SHOCK CORD HOOK 1/4” - HOBIE
2102 SHOCK CORD FASTENER (SCH) 5/16
3043 LICENSE FRAME - CHROME “HOBIE”
3044 LICENSE FRAME - CHROME “KAYAK”
3062 SHACKLE, FAST
3091 PADDLE, TELESCOPING 20”-3’9”
3103 BLOCK, MINI W/AXLE
5029 HAT, HOBIE FIRST CAST GRY/BLK
5031 HAT, HOBIE FLYING H FLAT BILL
5032 HAT, HOBIE KAYAK
5034 HAT, HAVE A HOBIE DAY ORANGE
5036 HAT, HOBIE FLYING H
5039 HAT, FISH PATTERN BLUE/BLACK
5107 SILICONE SPRAY 7oz
5120 HOBIE MULTI LUBE 1 OZ
5121 HOBIE MULTI LUBE 4 OZ
5411 FAT BAG-5”
5421 HATCH BAG KIT KAYAK
7003 MIRA ZYME 8 oz ODOR ELIMINATOR
7904 VELCRO ONE WRAP 1” BLACK
20501 HAIRPIN COTTER 5/16” 302 SS
71172 B/U RING 8.0” FOR PTL-8
71311 GASKET KAYAK 5”
72010 KEY FLOAT/SCUPPER PLUG
72035 QUICK STRAP SOFT RACK-24.0”
72040 QUICK STRAP RACK W/TIE DN
72041 MULTI STRAP SYSTEM
72044 PADS, RACK 24” AERO BAR
72045 RACK PADS -24.0”
72046 RACK PADS -36.0”
72049 PADS, RACK 36” AERO BAR
72050 KAYAK COVER / 9-12’ 6”
72051 KAYAK COVER / 12-15’
72052 KAYAK COVER / 14-16’
72053 KAYAK COVER / 14-16’ 6”
72054 KAYAK COVER / 16-18’ 6”
72055 KAYAK COVER / PA 14 CUSTOM
72056 KAYAK COVER / PA 12 CUSTOM
72057 KAYAK COVER / PA 17 CUSTOM
72065 ST-TURBO FIN KIT - GRAY/BLACK
78501 QUEST 13 RUDDER KIT/TWIST N ST
78502 QUEST 11 RUDDER KIT/TWIST N ST
80024 BAG, MIRAGEDRIVE CARRY
80041 KAYAK CART - “UNIVERSAL”
81024 LINE 5/32” NYLON BRAID-BLACK
81029 LOOP STRAP, 1/4” OD, NYLON
81380 CONTROL ARM - UP/DOWN
83102 TOOL GERBER MULTI-PLIER 600
83104 TOOL, HOG RING PLIERS
84503 SAIL KAYAK MAST 2-PC
84511 BATTEN KAYAK SAIL (55”) W/CAP
84950 BAG - KAYAK SAIL 128.0”
84960 MIRAGE TDM SAIL ADAPTER KIT-SM
84961 MIRAGE TDM SAIL ADAPTER KIT-LG
795465 SAIL ADV V2 WHT/GRAY/TURQ (AZU
795475 SAIL ADV V2 RED/GRAY/WHT (SMOK
795485 SAIL ADV V2 TURQ/PAPAYA/WHT (B
8000341 LOCTITE BLUE .5 ML CAPSULE
8004381 LINE 5 MM, DK GRAY w/MANGO TRA
8004531 LINE 1/8 NYLON BRAID BLK
8010131 RIVET POP 3/16x3/8 PH-SS
8010181 RIVET POP 3/16x1/4 PH
8011231 RIVET POP 3/16x1/2 PH
8012001 RIVET 6-9 BULB TYPE-KAYAK
8020041 CLEVIS PIN 3/16x.570 GRIP
8020061 CLEVIS PIN 3/16x.753 GRIP
8020381 CLEVIS PIN 1/4x.578 GRIP
8030031 SCREW #10x3/4 OHSMS-P
8030037 SCREW #6-32 x 3/4 PHMS
8030071 SCREW 10-32 X 1/2 FHMS
8030111 SCREW 10-32 X 1 PHMS-P SS
8030125 SCREW 10-32 x 1/2 BTN HD SCKT
8030126 SCREW 10-32 x 3/8 FLNG BTN HX
8030151 SCREW 10-32 x 1/2 PHMS-P SS
8030161 SCREW 10-32 X 1-1/2 PHMS-P SS
8030171 SCREW 12-24 X 3/4 RHMS-P SS* (
8030212 SCREW 1/4-20 X 1” OHMS-PH SS
8030214 SCREW 1/4-20 x 1” BTN HD
8030231 SCREW 10-32 x 3/8 P-THMS
8030251 SCREW 10-32 X 1” FHMS
8030261 SCREW #10 X 1-1/4 PHSMS-P
8030281 SCREW 10-32 X 3/4” RHMS-P SS
8030335 SCREW 1/4-20 x 3/4 HX SCKT CAP
8030346 SCREW W/NUT ISLAND GUDGEON
8030355 SCREW 5/16-24 x 3/4 BTN HD SCK
8030361 SCREW 5/16-18 X 1-1/4 SOC HD
8030451 SCREW 1/4-20 X 1-3/4 SCKT HD
8030502 SCREW 8-32 X 3/8 PMMS
8030591 SCREW 1/4-20 x 1-5/8 P-OHMS w/
8030641 SCREW 10-32 X 1/2 THMS-P SS
HOBIEKAYAKS.COM
OS
-
PartDescription
8030671 SCREW 8-32 X 5/8 PHMS-P
8030781 SCREW 1/4-20 X 1/2” SOC CAP
8030791 SCREW 1/4-20 X 5/8 SOC CAP
8030981 SCREW 10-32 x 3/4 PHPMS
8031051 SCREW #10 X 1/2 FHSMS-P TF
8031065 SCREW 10-32 x 7/8” THMS-P
8031069 SCREW 10-32x 1-1/4 THMS-P
8031071 SCREW 10-32 X 1-1/4 PHMSP
8031081 SCREW 10-32 x1 3/4 PHMS-S SS
8031111 SCREW 1/4-20x1 PHMS -P
8031131 SCREW #10x 3/4 PHSM-PH SS( ABA
8031151 SCREW #10 X 1/2 PHSMS-P
8031191 SCREW 1/4-20 X 1-1/4”PHMS
8031201 SCREW 8-32 X 1-1/4 SOC SET CUP
8031231 SCREW 8-32 X 7/8” FHMS
8031401 SCREW 6-32x1/2 FHMS-P SS
8031451 SCREW #8-32 x 5/16 P-THMS SS
8031461 SCREW 8-32 x 1” PHMS
8031481 SCREW 8-32 X 1-1/4 PHMS-P
8031490 SCREW 8-32 X 1/2 FHMS-P
8031501 SCREW 8 X 3/4” FHSMS-P SS
8031570 SCREW #14 x 1/2” P-THSMS SS
8031581 SCREW #8 X 5/8” PHSMS-SS PH
8031781 SCREW 5/16-18 X 1 E/S SOC
8031811 STUD 5/16-18 X 1-1/4” 18-8 SS
8031961 SCREW 12-24 x 1-1/4 P-OHMS SS
8032011 SCREW 1/4-20x1/2 RHMS-P SS
8032061 SCREW 1/4-20x1 1/4 PHPMS
8032081 SCREW 1/4-20 X 1-1/4 CAP SCREW
8032085 SCREW 1/4-20 X 1-1/4 FHMS-P
8032088 SCREW 1/4-20 x 2-1/4 HX CAP
8032121 SCREW #10 x 1 PHSMS-P TF-12
8032211 SCREW 10-32 X 2-1/2 PHMS
8032231 SCREW 1/4-20 X 1-1/4 BTN HD
8032241 SCREW 1/4-20 X 3/4 BTN HD
8034061 ALLEN WRENCH 1/8”
8034071 ALLEN WRENCH 5/64”
8040131 BOLT 1/4-20 X 3 1/2
8040531 BOLT 3/8-16 X 1-1/2 HEX CAP-S
8042151 BOLT 5/16-18 X 1/2 SHOULDER
8050111 NUT 1/4-20 HX NYLOCK
8050201 NUT 10-32 HEX NYLOCK
8050211 NUT 10-32 NYLOCK LOPRO
8050221 NUT (WELL NUT) 10-32 x1
8050231 NUT 10-32 HEX
8050540 NUT 3/8-16 HX NYLOCK-LP
8050801 NUT 8-32 MACH/SCREW SS
8052081 NUT 1/4-20 NYLON BLK
8060111 COTTER PIN 3/32 X 3/4 SS
8060141 COTTER PIN 1/8” X 2” SS
8063001 SLEEVE NICROPRESS 1/16”
8080211 WASHER #12 FLAT
8080461 WASHER #10 FLAT-.25 OD X .56 I
8080500 WASHER #10 FINISH
8080541 WASHER 1/4 X 5/8 FLAT SS
8080551 WASHER-FLAT .227 X .453 SS
8080561 WASHER 1/4 X 1/2 X .032 SS
8080571 WASHER FLAT 1/4x3/4x.063 SS
8080671 WASHER 5/16 X 3/4 FLAT SS
8080691 WASHER 3/8 X 3/4 NYLON-FLAT
8080701 WASHER 1/4 X 1 SS HP
8080731 WASHER #10 FNDR SS
8080791 WASHER NYLON FLAT (TNS)
10091000 DRAIN PLUG W/GASKET
10092025 GASKET-BLACK RUBBER
10092030 DRAIN PLUG w/GASKET- SEAT: KON
10730000CLEAT-MAST
10730021 CLAMCLEAT STBD BLACK
10730031 CLAMCLEAT PORT BLACK
10860001 LOCK RING 3/16”
10860100 LOCK RING 3/16” - 100 PACK
10870000 SHACKLE “BOW” 4.7 MM
11220000 SHACKLE STND “D” 4.7 MM
12451031 DECAL “HOBIE” DIAMOND-TURQ/SLV
12451050 DECAL “HOBIE” SCRIPT BLACK
12451051 DECAL “HOBIE” SCRIPT WHT
12453011 DECAL - HOBIE KAYAKS
12453021 DECAL - HOBIE KAYAK FISHING
12453023 DECAL, HOBIE SCRIPT CHROME/BLK
12453024 DECAL, 12” HOBIE FISHING BLACK
12453025 DECAL, 12” HOBIE FISHING WHITE
12453031 DECAL - HOBIE CAT TEQ
13001001 DECAL BOW - FLYING “H” BLK
20860000 LARGE CLEVIS RING
20860100 LARGE CLEVIS RING / 100 PACK
21180000 HOG RING 1/2” S/S, BLUNT, 14 G
22080011 JIB BATTEN PKT PROT W/SCREWS
36601000 DECAL FLYING “H” SMALL BLK
36601011 DECAL FLYING “H” SMALL WHT
37380001 CLAMCLEAT MINI CL204
38120031 NYLON PUSH-IN PANEL RIVET
38652000 TRAILER HOBIE ALUM KAYAK SINGL
38652001 TRAILER HOBIE ALUM KAYAK TI SI
38652200 TRAILER HOBIE ALUM KAYAK DOUBL
38652201 TRAILER ALUM KAYAK DOUBLE DOUB
38652202 TRAILER HOBIE ALUM KAYAK PA17
38652210 TOWER - TRAILER HOBIE ALUM DOU
38653300 TRAILER PAD KIT - KAYAKS
38670011 S HOOK,WAVE HALYD DWNHL
40590001 TILLER CONNECTOR RETAINER
41220001 EYELET POST
INDEX
OS
OS
OS
OS
OS
OS
OS
-
67
INDEX
68
PartDescription
41370001 HATCH SCREW-IN W/LIP-WHT 5”
53170020 SCREW 1/4-20 X 1/2 SKTST (ABA)
53180011 HOG RING 3/8” S/S FOR 3/16” BU
61070000 CLAMCLEAT JUNIOR CL203
70050001 HOBIE BOAT CLEANER-12oz
70060001 HOBIE UV PROTECTANT-12oz
71110001 PAD EYE-BLK NYLON-3/8”
71113001 DRAIN PLUG
71114001 DRAIN ASSY. OUTFITTER-FRONT
71115001 SHOCK CORD END - SCREW-IN (UAI
71115101 TOOL - SCREW IN FITTINGS
71116001 PADEYE - SCREW-IN (UAI)
71117001 CLEAT - SCREW-IN
71119001 PA PADDLE CLIP ASSY
71120001 LASHING HOOK-BLACK
71122001 JAM CLEAT - SCREW-IN
71123001 SHOCK CORD - SCREW-IN LARGE
71124001 PLUG, SCREW-IN
71125001 PAD EYE, SCREW-IN, XL
71125501 AMA / AKA DBL SHOCK CORD ASSY
71126001 HOOK, GATED, W/LADDER LOCK
71130001 HATCH SCREW-IN w/LIP-BLK 5”
71171001 B/U RING W/LIP FOR PTL-6
71175001 HATCH BAG 6.0 DIA.-RED
71190000 HANDLE - LIFTING (WEB W/HOLE71190001 HANDLE - LIFTING (WEB W/CAP 71220001 PAD EYE - CHROME
71230001 COVER, ROD HOLDER
71250001 SHOCK CORD ASSY, KONA FWD DECK
71251001 SHOCK CORD ASSY, PDL HOLDER
71253001 SHOCK CORD ASSY, ADV PDL HOLDE
71280001 KEEL GUARD, PADDLE MODELS
71301001 TRIM LOK SEAL (TOP MOLDED)
71302001 TRIM LOK SEAL (SIDE GLUED)
71305001 TRIM LOK SEAL (LG TOP-MOLDED)
71320001 GASKET 5.0” & 7-1/8” SET
71321001 GASKET KAYAK HATCH 6”
71331001 GASKET KAYAK HATCH 8”
71552001 SHOCK CORD ASSY, ADV FWD HATCH
71554001 SHOCK CORD ASSY, QUEST
71701001 HATCH 6” TWIST-N-SEAL RETRO
71701011 HATCH 6” TWIST-N-SEAL
71701021 O RING 6” TWIST-N-SEAL
71702001 HATCH 8” TWIST-N-SEAL RETRO
71702011 HATCH 8” TWIST-N-SEAL
71702021 O RING 8” TWIST-N-SEAL
71703001 HOBIE DRY BAG 8.0”
71704001 GEAR BUCKET
71704021 GEAR BUCKET - DEEP
71705001 GEAR BUCKET BAG
71706001 GEAR BUCKET 3 PAK W/BAG
71707001 RECTANGULAR HATCH ASSY BLACK
71707002 GASKET - RECTANGULAR HATCH
71708001 TACKLE MANAGEMENT RACK
71709001 BUCKET, HOBIE RECTANG HATCH
71710001 RECTANGULAR HATCH ASSY WHITE
71995001 WATER BOTTLE - STAINLESS
71996001 BOTTLE/CAN HOLDER
72009001 SCUPPER PLUG-PSUIT/MAUI/LANAI
72012001 SCUPPER PLUG KONA/QUEST
72013001 SKID GUARD, PRO
72020000 HOBIE GEAR KEEPER SMALL 36”
72020001 HOBIE GEAR KEEPER LARGE 36”
72020002 SAFETY FLAG 4’ (W/STUD)
72020003 HYDRO STAR SOS DLX LIGHT
72020007 HOBIE LIVEWELL
72020009 HOBIE DRIFT CHUTE
72020010 HOBIE SAFETY KIT
72020012 MOUNT - SAFETY FLAG
72020013 KAYAK GUN MOUNT (PAIR)
72020014 ROD HOLDER EXTENSION
72020015 ROD HOLDER - LIVEWELL w/FASTEN
72020019 FISH GRIP
72020020 FISHFINDER PACKAGE
72020021 ULTIMATE KAYAK FISHING PACKAGE
72020022 KAYAK FLY FISHING PACKAGE
72020023 KAYAK CUSTOMIZATION PACKAGE
72020024 MIRAGE PERFORMANCE PACKAGE V2
72020025 KAYAK TRAVEL PACKAGE
72020026 KAYAK SAFETY PACKAGE
72020028 MIRAGE SEAT PAD - INFLATABLE
72020029 HOBIE SAFETY PACKAGE-DELUXE
72020030 TEAR-AID / TYPE A (POLY)
72020031 TEAR-AID / TYPE B (VINYL)
72020032 BILGE - HAND PUMP
72020034 PEDAL PAD KIT BLACK (PAIR)
72020040 SAFETY FLAG/LIGHT COMBO
72020041 HATCH LINER - OUTBACK
72020042 HATCH LINER - REVO 13 / 2013+
72020044 HATCH LINER - REVO 11/QUEST 11
72020051 MIGHTYMOUNT W/ MOUNT HDWR
72020052 MIGHTYMOUNT SCOTTY KIT W/ HDWR
72020053 SCREWBALL, 1” , 1/2” MTYBOLT
72020054 SCREWBALL 1-1/2”, 1/2” MTYBOLT
72020055 PANFISH POLE (NO MOUNT)
72020056 PANFISH PORTRAIT (NO MOUNT)
72020057 GEARTRAC, 8”, 2 PK W/ HDWR
72020058 GEARTRAC, 12”, 2 PK W/ HDWR
72020059 GEARTRAC, 16”, 2 PK W/ HDWR
72020063 HIKING STICK - AI/TI
72020066 FIGHTING CUP KIT VANTAGE CHAIR
OS
-
PartDescription
72020067 HOBIE FISHING HAWG TROUGH
72020070 FISHFINDER INSTALL LOWRANCE RE
72020072 HOBIE LIVEWELL XL
72020073 ANCHOR TROLLEY KIT - UNIVERSAL
72020074 ROD HOLDER EXTENSION / ADJ
72020076 POWER-POLE / POWER KIT
72020078 HOBIE FIRST AID KIT
72020083 POWERPOLE MICRO AND SPIKE
72020084 POWERPOLE MICRO ANCHOR MOTOR
72020085 SPIKE - POWER POLE MICRO 8.5’
72020087 COOLER - PA BUCKET / ALL CARGO
72020088H-CRATE
72020090 TROLLING MOTOR MOUNT / PA17
72020092 RESCUE STEP - KAYAK
72020097 H-CRATE SOFT COVER
72020098 ROD HOLDER ASSEMBLY / H-RAIL
72020099 HD STRAP KIT
72020100 MOTORGUIDE QR BRACKET
72020101 FISHFINDER INSTALL KIT
72020103 BOOMERANG SNIPS
72020104 FISHFINDER LOW READY PACKAGE
72020105 FISHFINDER H-RAIL PACKAGE
72020111 FISH BAG/COOLER LARGE
72020113 FISH BAG/COOLER MEDIUM
72020120 TROLLING MOTOR Xi5 50” FRESH
72020121 TROLLING MOTOR Xi5 50” SALT
72020122 BATTERY BOX POWER CENTER
72020123 BATTERY CHARGER 12 / 6 VOLT
72020124 PROP WEEDLESS 2 BLADE 3.5”
72020125 PROPNUT / WRENCH / PINS
72020126 PINPOINT GPS GATEWAY KIT
72020127 NMEA2000 STARTER KIT
72020128 6-PIN LOWRANCE TOUR ADAP
72020130 CELLBLOK BATTERY HOLDER
72020131 PARKNPOLE LINK 3PC 12’ STAKEOU
72020132 OUTBACK POWER-POLE MOUNT 200772020140 GEAR TRAC GTTL90 4” W/HDWR
72020141 GEAR TRAC GTTL90 8” W/HDWR
72020142 GEAR TRAC GTTL90 12” W/HDWR
72020176 POWERPOLE - MOUNT KIT PRO A
72020177 POWERPOLE - MOUNT PLATE ONLY
72020185 MICRO ANCHOR LIB BATT & CHARGE
72020201 FISHFINDER HOOK-3X
72020202 FISHFINDER/GPS HOOK-4
72020203 FISHFINDER/GPS HOOK-5
72020204 FISHFINDER/GPS HOOK-7
72020205 FISHFINDER/GPS ELITE-5 Ti DI
72020206 FISHFINDER/GPS ELITE-7 Ti SI
72020284 H-CRATE TIE DOWN STRAP ASSY
72020300 KAYAK RIGGING KIT - HARDWARE
72020301 HARDWARE KIT 1.25 (4 PACK)
72020311 TACKLE BOX - SMALL YELLOW
72020321 TACKLE BOX - MEDIUM BLUE
72020331 TACKLE BOX - LARGE RED
72020350 SPINNAKER KIT ADVENTURE ISLAND
72020351 SPINNAKER KIT TANDEM ISLAND
72020352 SPINNAKER ADVENTURE ISLAND
72020353 SPINNAKER TANDEM ISLAND
72020354 ISLAND SPINNAKER HOOP
72020355 ISLAND SPINNAKER SOCK / BAG
72020356 MAST HEAD VANE, ISLAND
72020400 CRADLE SET - ADV ISL <=2014 TR
72020401 CRADLE SET - PRO ANGLER TRAILE
72020402 CRADLE SET - TDM ISL TRAILER
72020404 CRADLE SET - PA17 TRAILER
72020405 DOLLY HANGER KIT- PA17 TRAILER
72020406 CRADLE SET - ADV ISLD 2015+ TR
72020511 QUAD LOCK UNI PHONE MOUNT
72021001 BATTERY - LIVEWELL
72021002 BATTERY CHARGER - LIVEWELL
72021003 SWITCH - LIVEWELL
72021004 INTAKE TUBE ASSY - LIVEWELL
72021005 STRAP SET - LIVEWELL
72021006 BATTERY LID - LIVEWELL
72021007 PUMP CONNECTOR FEMALE - LIVEWE
72021008 PUMP CONNECTOR MALE - LIVEWELL
72021009 DOWNSPOUT FITTING - LIVEWELL
72021010 INTAKE 90 DEGREE - LIVEWELL
72021011 INSTALATION PADS BROAD/DSI
72021015 MARINE GOOP
72021020 DOWNSPOUT TUBE - LIVEWELL
72021021 TERMINAL COVER - BATTERY LIVEW
72021022 PUMP ATTWOOD - LIVEWELL
72021023 INTAKE TUBE 7” ONLY - LIVEWEL
72021027 ELEC CONNECTOR SET
72021035 AI LIVEWELL ADAPTER KIT
72021037 PLUG - LIVEWELL PUMP
72021041 HDI TRANSDUCER PAD
72021060 HORIZONTAL ROD HOLDER KIT
72021066 BATTERY LARGE LID - LIVEWELL
72021108 PROP, HOBIE DESIGN, TORQ MOTOR
72021113 THRU HULL FITTING, PWR PLUG, V
72021114 BACKING RING, PWR PLG THRU HUL
72021115 MNTG PLT, M12 CABLE GLAND
72021116 BACKING RING, MNTG PLT, M12 CA
72021119 GASKET PACK, CABLE MOUNTS
72021120 CAP, PWR PLUG, FEMALE v1
72021122 LANYARD, TYCO CNCTR CAP V1
72021123 CAP, M12 CNCTR, FEMALE CVR
72021124 CAP, M12 CNCTR, MALE CVR
72021128 CAP ASSY POWER PLUG MALE
OS
OS
OS
-
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
INDEX
PartDescription
72021129 FIN KIT - EVOLVE
72021132 EVOLVE v1 - BATTERY CHARGER
72021133 REMOTE THROTTLE, TORQEEDO
72021134 CABLE, POWER EXTENSION, 170”
72021135 CABLE, M12, THROTTLE BOX CONEC
72021136 CABLE, M12, THROTTLE CONTROL
72021137 KEY W/LANYARD AND CLIP
72021148 PROP ALIGNMENT TOOL - EVOLVE
72022010 TORQ TRAC SMARTPHONE ACCESSORY
72022030 EVOLVE v2 MOTOR KIT - K
72022031 EVOLVE v2 CABLE KIT (2ND HULL)
72022040 EVOLVE v2 MOTOR KIT - i
72022130 EVOLVE v2 MOTOR W/225 PROPELLE
72022131 EVOLVE v2 BATTERY
72022132 EVOLVE v2 - BATTERY CHARGER
72022133 EVOLVE v2 - SOLAR PANEL 23w
72022134 EVOLVE v2 CABLE, PWR EXT, 170”
72022139 CARRY STRAP - EVOLVE BATTERY
72023002 RAM SPACE SAVER BASE 1.5” BALL
72023015 RAM MAST-TUBE WEDGE MOUNT 1.5”
72023016 RAM MAST-TUBE WEDGE MOUNT 1”
72023017 RAM U-BOLT RAIL BASE w/ 1” BAL
72023019 RAM DBL 1” BALL SOCKET ASSEMBL
72023025 RAM U-BOLT BASE w/1.5” BALL
72023028 RAM BASE (STRAP .5” - 2”) 1.5”
72023029 RAM V-BASE (STRAP 1”- 2.1”) 1”
72023032 RAM CAMERA MOUNT ARMS
72023033 RAM SMALL ROUND BASE 1/4”-20
72023034 RAM GOPRO MOUNTING BASE 1”
72023035 RAM 18” TRANSDUCER MNT
72023036 RAM 10” POST EXTENSION ARM 1.5
72023042 RAM BOND A BASE - INFLAT/GREY
72023044 RAM BASE 1” DIAMOND 2 7/16” X
72023045 RAM BASE 1” BALL ROUND 2 7/16”
72023046 RAM BASE 1.5” BALL 2” X 2.5”
72023047 RAM DBL BALL SOCKET ARM 1.5” P
72023048 RAM ROD 2007 JR. FLY ROD HOLDE
72023049 RAM TUBE JR HOLDER
72023050 RAM ROD 2000 ROD HOLDER
72023051 RAM TUBE 2008 ROD HOLDER
72023052 RAM FISH FINDER BASE W/ 1” ARM
72023053 RAM LOWRANCE BASE W/ 1” ARM
72023054 RAM LOWRANCE BASE W/ 1.5” ARM
72023055 RAM LOWRANCE BASE W/ 1.5” ARM
72023056 RAM X-GRIP UNIVERSAL HOLDER W/
72025001 BATTERY - 12v FISHFINDER
72025002 CHARGER - 12v BATTERY FISH F
72025003 PIGTAIL WIRE / 12v FISHFINDER
72025004 FOAM BATTERY PAD
72025005 WATER PROOF WIRE CONNECTOR LG
72025007 HOLDER, 12v FF BATTERY
72025009 PIGTAIL WIRE/ 12ft FOR 12v BAT
72026100 FUGOO TOUGH - BLUETOOTH SPK
72026101 FUGOO MULTI-MOUNT
72026102 MOUNT FUGOO H-RAIL
72026200 RB ROD HOLDER II ONLY BLACK
72026201 RB ROTATING PLATFORM 102MM(4””
72026202 RB G-HOLD 50MM(2”) SINGLE BLK
72026203 RB GUNHOLD (1)
72026204 RB CAMERABOOM 600 PRO SERIES
72026205 RB CAMERA MOUNT KIT
72026206 RB BLACK RIBPORT / STARPORT W/
72026207 RB STARPORT BLACK
72026208 RB STARPORT HD BLACK
72026209 RB ROD HOLDER II STARPORT HD K
72026210 RB RAILMNT AKA STARPORT COMB B
72040011 RHINO UNIVERSAL SIDE LOADER
72040012 RHINO NAUTIC KAYAK LIFTER
72040013 RHINO 2” RECEIVER T-LOADER
72040014 RHINO 2” BALL T-LOADER
72042001 TIE DOWN STRAPS HOBIE- 12 FOOT
72043001 TIE DOWN STRAPS HOBIE- 15 FOOT
72061001 PIN, LOCK SINGLE - KAYAK DOLLY
72062001 SIDEKICK - LOCK PIN SINGLE
72062011 SIDEKICK - MOUNT BRACKET BOTTO
72062021 SIDEKICK - MOUNT BRACKET TOP
72062041 SIDEKICK - CROSSBAR MIDDLE
72062061 SIDEKICK - ADP PLATES +07 ADVE
72062062 SIDEKICK - MOUNT KIT W/CTR BAR
72062063 VENT CAP - SIDEKICK AMA FLOAT
72062101 SIDEKICK AMA KIT - LT GRAY
72062111 SIDEKICK - FLOAT LT GRAY W/ QU
72062201 SIDEKICK - BENT ARM
72063101 SIDEKICK AMA KIT - DK GREEN
72063111 SIDEKICK - FLOAT DK GREEN W/ Q
72066001 ST-TURBO FIN KIT V2/GT - GRAY/
72066021 ST-TURBO FIN KIT V2/GT - RED/B
72066031 ST-TURBO FIN KIT V2/GT - BLU/B
72076001 STAKEOUT POLE - KAYAK FISHING
72088001 KAYAK STAND 31” (PR) TALIC
72097001 KC WELDER PRO WITH ROD STOCK
72103001 MOUNT, SHOCK CORD
72104001 ADJ SHOCK CORD HOOK 3/8”
72402001 KAYAK SEAT - PADDLE
72409001 STRAP W/HOOK - PADDLE SERIES
72542001 DECAL DOME, HCC GOLD 1.75”
72721001 KAYAK DODGER / SILVER
72722001 KAYAK DODGER / RED
72730002 DODGER - ISLAND / SILVER
72730004 DODGER - ISLAND / RED
74010001 PADDLE BLADE RIGHT
HOBIEKAYAKS.COM
OS
HAZ
HAZ
HAZ
OS
-
PartDescription
74011001 PADDLE BLADE LEFT
74030002 PADDLE DRIP RING FG/ALU SHAFT
74035001 FOLDING PADDLE CLIP, 1-1/8”
74049001 T- HANDLE, PADDLE
74050001 PADDLE LEASH-WEB/ELASTIC
74051001 PADDLE LEASH-COIL
74052001 HOBIE FISH ROD LEASH- WEBBING
74052101 LEASH KIT - MIRAGEDRIVE
74070001 PADDLE CLIP PA12
74075001 PADDLE 230 cm HOBIE FIBER SHAF
74076101 BUTTON ASSY - PADDLE FERRULE
74076102 SPRING BUTTON, PADDLE SHAFT
74077001 i - PADDLE, 4 PIECE
74090001 PADDLE 260 cm HOBIE FIBER SHAF
76050001 HANDLE KAYAK (MOLDED)
76055001 HANDLE, MIDSHIP
78510001 BUNGEE HOOK
78520001 EYELET HOLD DOWN
78535001 FOOT BRACE ASSY-LT
78536001 FOOT BRACE ASSY-RT
78540001 TRACK ADJ - BRACE/QUEST
78552001 GUDGEON - QUEST 13 T-N-S NEWER
78560001 MAP POCKET FRAME w/MESH
78561001 MAP POCKET MESH MOLDED HOOKLES
79050001 MIRAGE WELL ASSY - INFLATABLES
79050011 CAM LEVER / CLICK-N-GO WELL
79050021 SPRING / i - CLICK-N-GO WELL
79050041 BOLT, SHOULDER 1/4 “ / CLICK79050061 CASSETTE PLUG/i- SERIES
79050211 DRAIN PLUG - 3/8” W O-RING&KEE
79050212 O-Ring .299ID x .505OD Neopren
79050214 SCUPPER PLUG / i-SERIES
79050400 i - WRENCH-MIRAGE DRIVE SS
79052001 i - CUP HOLDER KIT
79052003 i - INFLATION PUMP / STANDARD
79052005 i - INFLATION PUMP / ELECTRIC
79052006 i - HARDWARE ACCESSORY KIT
79052007 i - SEATBACK
79052009 i - HULL REPAIR KIT
79052010 i - ROLLING TRAVEL BAG/ i - 12
79052011 i - ROLLING TRAVEL BAG/ i - 14
79052012 i - ROLLING TRAVEL BAG/ i - 9
79052013 i - O RING LG - INFLATION PUM
79052014 i - O RING SM - INFLATION PUMP
79052015 i - TRI RING KIT / SAGE
79052016 i - TRI RING KIT / SUNDANCE
79052017 i - VALVE ASSEMBLY
79052018 i - GLUE 30g TUBE
79052019 i - PADDLE HOLDER
79052202 i - SAIL KIT TURQ/PAPAYA
79052203 i - SAIL KIT WHITE-TURQ
79052204 i - SAIL KIT SILVER-WHITE
79052251 SAIL KAYAK MAST 4-PC
79104101 XBAR AI V2 - REAR 201579104201 XBAR AI V2 - FWD 201579501001 DAGGERBOARD WELL PLUG - ADV
79502001 DAGGERBOARD / ADV - REV 16
79503601 AKA AI V2 - RT REAR 201579503701 AKA AI V2 - LT REAR 201579503801 AKA AI V2 - RT FWD 201579503901 AKA AI V2 - LT FWD 201579510001 MAST - ADV ISLAND (‘07 / MALE
79510011 MAST - ADV ISLAND (‘08 / FEMA
79510015 MAST - ADV ISLAND 2015+
79510201 BAG-ADV ISLAND MAST/SAIL -2014
79510202 BAG - TANDEM ISLAND MAST/SAIL
79510221 BAG-ADV ISLAND MAST/SAIL 2015+
79510721 MOUNT XBAR V2 - TOP
79510731 MOUNT XBAR V2 - BOTTOM
79511001 BASE / PIN - ISLAND MAST
79511021 MAST CAP - AI (SWIVEL TIP)
79511101 BASE / HOLE - ‘08 ISLAND MAST
79511991 SAIL ADV ISL CUSTOM COLOR
79512001 DRUM - ISLAND MAST FURLER
79512201 AKA AI V2 - RT FWD 2011-2014
79512301 AKA AI V2 - LT FWD 2011-2014
79512401 AKA AI V2 - LT REAR 2011-2014
79512501 AKA AI V2 - RT REAR 2011-2014
79512601 XBAR AI V2 - FWD 2011-2014
79512701 XBAR AI V2 - REAR 2011-2014
79513001 BACKING RING, AI MAST RECEIVER
79514101 MAST RECEIVER CUP ASSY AI ‘08+
79515001 SAIL ADV ISL RED/GRAY/WHT
79516001 SAIL ADV ISL TURQ/PAPAYA/WHT
79517001 V-FRAME, STRUT
79518001 V-FRAME, BASE
79519001 V-FRAME, TURNBUCKLE-BRASS
79520001 AKA AI V1 - FWD 2007-2010
79520201 COLLAR - AKA
79520301 END CAP - AKA
79520311 AKA, FWD - TI
79520401 AKA, LT REAR - TI
79520501 AKA, RT REAR - TI
79520601 SPRING HOOK, XBAR/AKA
79521001 AKA AI V1- LT REAR 2007-2010
79522001 AKA AI V1- RT REAR 2007-2010
79522201 LOCK BEARING, AKA XBAR
79523001 SOCKET - AKA BRACE LOCK
79523101 BRACE ASSY AKA AI V1 -22”
79523201 BRACE ASSY AKA AI V2 -23”
79523301 BRACE ASSY AKA AI V2 2015 -21”
OS
OS
OS
OS
OS
OS
OS
-
69
INDEX
70
PartDescription
79524001 CAP - AKA BRACE LOCK
79525001 BALL - AKA BRACE
79526001 BAG - AKA CARRY - AI V1
79526002 BAG - AKA CARRY - V2 ALL
79526201 ISLAND PADDLE / AKA BRACE KIT
79526211 PADDLE STORAGE WEB ASSY ISLAND
79527001 TRAMP SET AI (- 2014) - BLACK
79527011 TRAMP SET AI (- 2014) - GRAY
79527101 LACING ROD - AI TRAMP
79527201 TRAMP AI/TI - WEB/BUCKLE ASSY
79530001 XBAR AI V1- REAR 2007-2010
79530201 XBAR, REAR - TI
79531001 XBAR AI V1- FWD 2007-2010
79531101 CLEAT SUPPORT WEDGE w/FAIRLEAD
79531111 CLEAT SUPPORT WEDGE
79531201 XBAR, FWD - TI
79532001 SPRING ASSEMBLY, ISLAND ADV
79532201 EDGE GUARD - ISL CROSSBAR
79533001 BEARING PLATE, MAST FURLER
79535001 CONNECTION PIN, AKA/XBAR
79537001 CLIP, ISLAND AKA BRACE KIT (2)
79538001 PADDLE CLIP, ISLAND XBAR
79538101 ISLAND PADDLE HOLDER KIT
79538201 PULL TAB - WEBBING LOOP
79545001 DECAL, HOBIE DOME, GOLD 2.75”
79546001 SAIL ADV ISL WHT/GRAY/TURQ
79551001 LOCKING LEVER, MAST RECEIVER
79552001 STEP PIN PLATE / ISLANDS
79555001 LEAF SPRING, MAST RECEIVER
80010301 MIRAGE V2 COMFORT SPARE PARTS
80010401 MIRAGE GT SPARE PARTS KIT
80010501 MIRAGEDRIVE GT - ST BLUEFINS
80012001 PEDAL RETAINER BUNJEE ASSY
80012101 MIRAGEDRIVE PA17 GTT - TURBO B
80012501 MIRAGEDRIVE GTT - TURBO BLUEFI
80013301 MIRAGE V2 TURBO SPARE PARTS KI
80013401 MIRAGE GTT SPARE PARTS KIT
80013501 MIRAGEDRIVE GTi - ST BLUEFINS
80019011 LINE KIT PRO ANGLER CONTROL RE
80019012 LINE KIT ISLAND CONTROL REPLAC
80020001 LINE KIT MIRAGE RUDDER / UNIVE
80025001 LINE CONTROL ASSY - (1) LINE A
80030001 SPEEDOMETER MIRAGE DRIVE
80043000 HOBIE TRAX “2-30” FRAME ONLY
80043001 HOBIE TRAX “2-30” CART PLUG-IN
80043011 HOBIE TRAX”2-30” WHEEL REPL V1
80043012 HOBIE TRAX”2-30” WHEEL REPL V2
80044021 HOBIE-TRAX CART FRAME V2
80044031 HOBIE PLUG-IN CART PAD
80044051 HOBIE-TRAX HUB LOCK KNOB
80044101 HOBIE TRAX “2” CART PLUG-IN
80044111 HOBIE TRAX “2” WHEEL REPL V1
80044112 HOBIE TRAX “2” WHEEL REPL V2
80044151 PIN W/SHOCK CORD - CART KEEPER
80044201 CART POST COLLAR/CLAMP KIT
80044202 CRADLE / PLUG-IN CART FOR TI U
80045000 CAP - HOBIE CART DOME
80045001 HOBIE STANDARD PLUG-IN CART
80045041 HOBIE STANDARD CART - WHEEL
80045101 i - HOBIE PLUG-IN CART
80046001 HOBIE HVY DUTY PLUG-IN CART
80046021 PIN, QUICK CLIP KAYAK CART
80046041 HVY DUTY CART - WHEEL REPL.
80046100 HOBIE DOLLY, AI/TI TUFF-TIRE
80046101 HOBIE DOLLY, PA-UNI TUFF-TIRE
80046102 HOBIE DOLLY, PA17 TUFF-TIRE
80046120 HANDLE REPLACE- KAYAK DOLLY
80046123 STRAP REPLACEMENT - PA17 DOLLY
80046124 CRADLE REPLACEMENT PA17 DOLLY
80046141 WHEEL, DOLLY TUFF-TIRE
80046200 HOBIE DOLLY, AI/TI BEACH-TIRE
80046201 HOBIE DOLLY, PA-UNI BEACH-TIRE
80046202 HOBIE DOLLY, PA17 BEACH-TIRE
80046241 WHEEL, DOLLY BEACH
80047201 CART C-TUG KAYAK CART
80048001 ROD HOLDER-BAIT CASTER W/MOUNT
80048002 ROD HOLDER HEIGHT EXTENDER 8.5
80048003 ROD HOLDER HEIGHT EXTENDER 6.5
80048004 ROD HOLDER w/ SIDE/DECK MOUNT
80048005 ROD HOLDER-ROCKET LAUNCHER
80048006 GEAR HEAD MOUNT
80048007 ADAPTER, GEAR-HEAD TRACK
80049001 FLUSH DECK MOUNT, BLK
80052001 DECK / SIDE MOUNT, BLK
80055001 ROD HOLDER-FLY w/DECK MNT
80503701 ACORN NUT - VANTAGE
81013001 STEERING HANDLE 2011 STD LENGT
81014001 STEERING CRANK SPORT/REV 11
81015001 STEERING HANDLE ASSY MIRAGE
81016001 STEERING CRANK REV 13/OUTBK
81017001 STEERING CRANK, OUTFTR/OASIS
81023001 LINE-CONTROL 700 LB GRAY
81030001 ZIP TIE, 6-5/16”, BLK NYLON
81035001 RUDDER UP/DOWN HANDLE W/SCREW
81035011 HANDLE - UP/DOWN RETRO KIT
81037001 DRIVE SEAL / MIRAGE DRIVE
81038001 DRIVE SEAL / i - MIRAGE DRIVE
81042001 PADDLE VELCRO TIE
81042021 3/4” PVC INSERT (6” CL)
81050001 OUTHAUL BLOCK (INJ/MOLD)
81051001 LINE-CONTROL 1,000 lb, BEIGE
OS
OS
OS
OS
OS
OS
OS
OS
OS
-
PartDescription
81055001 SPROCKET GUARD FWD (INJ/MLD)
81080001 SPROCKET SHAFT MIRAGE
81090001 DRUM SHAFT MIRAGE
81095001 ALIGNMENT PIN - MIRAGE DRIVE
81110001 SHAFT #5 MIRAGE
81121001 IDLER PULLEY (PLASTIC DRUM)
81123001 IDLER PULLEY - GT W/BEARINGS
81127001 SPROCKET GT - W/ BEARINGS AND
81128001 SPROCKET W/SET SCREW (INJ/MLD)
81129001 SPROCKET V2 - THREADED W/GUARD
81129022 V2 SPROCKET / MAST KIT STD (PA
81129023 GT SPROCKET / MAST KIT STD
81129122 V2 SPROCKET / MAST KIT TURBO
81129123 GTT SPROCKET / MAST KIT TURBO
81155001 BOLT DRUM/CRANK
81156201 ROLLER BEARING, IDLER PULLEY
81156301 ROLLER BEARING, SPROCKET
81156401 ROLLER BEARING, DRUM
81160001 MAST, MIRAGE DRIVE, STD (UNIVE
81163001 MAST - V2 STANDARD - THREADED
81171001 DRUM PLASTIC MIRAGE
81171002 DRUM UPDATE KIT V1 TO V2
81172001 DECAL, PEDAL ADJUSTMENT
81173001 DRUM - V2
81175001 DRUM - GT WITH BEARINGS
81181001 SPINE MIRAGE DRIVE - PLASTIC
81190001 FIN - MIRAGEDRIVE / COMFORT
81192001 MIRAGE ST TURBO FIN - GRAY/BLK
81192021 MIRAGE ST TURBO FIN - RED/BLK
81192031 MIRAGE ST TURBO FIN - BLU/BLK
81193001 MIRAGE ST FIN - GRAY/BLACK
81193021 MIRAGE ST FIN - RED/BLACK
81193031 MIRAGE ST FIN - BLU/BLACK
81198001 MAST - ST TURBO FIN/UNIVERSAL
81198101 MAST - V2 ST TURBO - THREADED
81202001 CHAIN ASSY, MIRAGEDRIVE V2
81203001 IDLER CABLE, MIRAGEDRIVE V2
81211001 IDLER CABLE ASSY (14 3/4) MIRA
81221001 PEDAL / CRANK ASSY LEFT
81221011 PEDAL REPLACEMENT LEFT
81222001 PEDAL / CRANK ASSY RIGHT
81222011 PEDAL REPLACEMENT RIGHT
81222101 CAP - PEDAL CRANK
81226001 PEDAL STRAP REPLACEMENT RIGHT
81227001 PEDAL STRAP REPLACEMENT LEFT
81230001 PEDAL ADJUSTMENT PIN
81236001 PEDAL ADJUST HANDLE ASSY
81240001 ADJUSTMENT HANDLE (OSP)
81242001 SPRING COMPRESSION 1-1/4” LNG
81244001 STEERING SPRING
81245001 PIN, ROLL 1/8 x 1-1/4 (420 SS)
81259001 SEAT STRAP w/HOOK
81265001 PLUG-IN SEAT PEG (OLDER)
81265101 PLUG-IN SEAT CONNECTOR KIT ADJ
81267001 HOOK, KAYAK SEAT
81268001 MIRAGE BACKREST - EXPAND PEG
81269001 MIRAGE BACKREST - TWIST LOCK
81276201 TWIST LOCK SEAT ADAPTER KIT
81350001 RUDDER MOUNT-MIR
81360001 RUDDER PIN MIRAGE S.S.
81361001 RUDDER MOUNT PIN MIR 4-1/2”
81362001 RUDDER MOUNT PIN TDM/OUT/SPT
81372001 STEERING CRANK ADV/OUTFITTER
81375001 COMPRESSION SPRING (1)
81380001 CONTROL ARM - UP/DOWN
81385001 WASHER 13/16 EDPM RUBBER
81390001 RUDDER MIRAGE - ORIGINAL STYLE
81391002 RUDDER UP/DOWN LINE SYSTEM
81391011 GUDGEON, T-N-S RDR (UAI)
81392001 CONTROL ARM, TWIST-N-STOW RDR
81394001 RUDDER PIN, TWIST N’ STOW RDR
81394021 RUDDER PIN, TWIST N’ STOW 2011
81395001 RUDDER ASSY W/SM BLADE - TWIST
81395201 RUDDER BLADE - SMALL / TWIST-N
81396001 RUDDER ASSY W/LRG BLADE - TWIS
81397001 RUDDER BLADE - LARGE / TWIST-N
81397101 i / QUEST - RUDDER BLADE - LAR
81399001 BOLT TWIST-N-STOW DRUM
81400001 TUBING HI-DENSITY PE
81401001 HANDLE CAP - SEAT
81401101 HANDLE CAP - RUDDER
81401201 HANDLE CAP - SKEG
81401301 HANDLE CAP - KICKSTAND
81401401 HANDLE CAP - DRAIN
81405001 STEERING TUBE HOLDER (UAI)
81405101 CAP - STEERING TUBE “O” RETAIN
81406001 HANDLE DECAL - UP
81406101 CAP, UP INSERT
81407001 HANDLE DECAL - DOWN
81407101 HANDLE CAP - DOWN
81408001 HANDLE - DECAL TYPE
81408101 HANDLE - CAP TYPE
81410001 CAM LOCK KNOB
81412001 AKA CASTING GLUE KIT - V2 AKAS
81450001 CHEEK BLOCK - HOBIE
81535001 CASSETTE PLUG-BLK & GRAY
81536001 CASSETTE PLUG TALL - PRO / OUT
81600001 COVER, CLICK-N-GO, LEFT
81600101 COVER, CLICK-N-GO, RIGHT
81600201 COVER - LEVER, CNG LT - INSIDE
81600301 COVER - LEVER, CNG RT - INSIDE
OS
-
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
INDEX
PartDescription
81600401 COVER - LEVER, CNG LT -OUTSIDE
81600501 COVER - LEVER, CNG RT -OUTSIDE
81602101 SPRING CLICK-N-GO LEFT
81602201 SPRING CLICK-N-GO RIGHT
81611101 CLICK-N-GO ASSY LEFT/PORT
81611201 CLICK-N-GO ASSY RIGHT/STBD
82420001 COVER, RUDDER TI/2011+ AI
84431002 DVD 1ST H KAYAK WORLD CHAMP
84500001 SEAT ASSEMBLY - PRO ANGLER
84500011 LUMBAR PAD PRO ANGLER
84500021 SEAT STRAP ASSY - PRO A
84500031 SEAT STRAP BUCKLE SS - PRO A
84500101 RUDDER BLADE, PRO A
84500103 STRUT TUBE, PRO ANGLER H-BAR
84500104 FORK, PRO ANGLER H-BAR
84500105 MOUNT, PRO ANGLER H-BAR
84500106 PAD H-BAR
84500108 CLIP, PRO ANGLER H-BAR
84500109 STRUT TUBE-SHORT, PRO A H-BAR
84500114 HOBIE H-BAR/ ADJUSTABLE
84500115 PA17 H-BAR H-RAIL ADAPTER KIT
84500201 RUDDER HOUSING, UNDER HULL
84500401 RDR MOUNT, UNDER HULL (PIN)
84500402 RDR MOUNT, UNDER HULL (SCREW)
84500501 RDR STEERING DRUM (PIN TYPE)
84500502 RDR STEERING DRUM (SCREW TYPE)
84500601 COVER PLT, RDR SYSTEM
84500821 KICKSTAND WEBBING ASSEMBLY
84500911 ROD HOLDER ASSY (L) - PRO A
84500921 ROD HOLDER ASSY (R) - PRO A
84501001 B/U PLATE, ROD HOLDER
84501101 GASKET, ROD HOLDER PLT
84501113 MOUNT ASSEMBLY / H-RAIL
84501201 HATCH LINER - PRO ANGLER 12
84501211 ROD HOLDER ASSY PA12 LT
84501221 ROD HOLDER ASSY PA12 RT
84501222 GASKET - PA12 ROD HOLDER
84501231 UNDER SEAT TACKLE BOX WEBBING
84501521 WASHER, 3/16x 1/2 OD, RUBBER
84501901 HATCH LINER - PRO ANGLER 14
84502001 MOUNTING BOARD, RT, BLK
84502011 MOUNT BOARD, 2015+, LT BLK
84502101 MOUNTING BOARD, LT, BLK
84502111 MOUNT BOARD, 2015+, RT
84502201 CUTTING BRD, CNTR, BLACK
84502211 PA14 V1 MID HATCH BUNGEE ASSY
84502301 SISTER SCREW, PRO RDR ASSY
84502401 FLOOR MAT RT-BLK
84502501 FLOOR MAT LT-BLK
84502901 KNOB, SEAT FRONT
84504001 TORSION SPRING, RUDDER
84504101 SIDE HANDLE ASSY - UNIVERSAL
84504201 TUBE, STERN HANDLE
84504301 DECAL, RULER
84504401 HANDLE END FITTING
84504501 HANDLE BOW - PRO ANGLER
84504601 PA12 SIDE CARRY HANDLE
84504801 TUBE STERN HANDLE, BLUE GRAY
84504901 DECAL RULER PA12
84505001 STORAGE BUCKET ASSY
84505101 STORAGE BUCKET COMPARTMENT
84505201 STORAGE BUCKET DIVIDER SET OF
84505901 ADAPTER KIT, HUMMINBIRD FF
84506201 STEERING (PRO A) REVERSIBLE AS
84507501 VANTAGE ST CHAIR - COMPLETE
84507521 BACK FRAME ASSEMBLY - VANTAGE
84507531 BOTTOM FRAME ASSEMBLY - VANTAG
84507541 ARMREST FRAME ASSEMBLY - VANTA
84507551 BACK CONTROL LINE - VANTAGE
84507561 BOTTOM CONTROL LINE - VANTAGE
84507571 CHAIR FEET - VANTAGE
84507581 BOA LINE ASSEMBLY - VANTAGE
84507601 CHAIR FOOT MOUNT
84507611 TRIANGLE RING - VANTAGE
84507701 VANTAGE CT SEAT - iSERIES
84507711 ARM REST PAD PACK - VANTAGE
84507721 PAD UNDER SEAT PA12
84507761 INNER SPACER - VANTAGE
84507771 ANCHOR TROLLEY INSERT CAPS
84507791 OUTER SPACER - VANTAGE
84507800 DECAL - VANTAGE
84507801 REPLACEMENT FABRIC KIT VANTAGE
84507821 VANTAGE CT SEAT
84507851 FABRIC COVER - VANTAGE
84507861 FABRIC COVER WITH PADEYE - VAN
84507881 BOA STEERING LINE TENSION KIT
84508001 VANTAGE KICKSTAND ASSEMBLY
84508201 PIVOT BOLT - VANTAGE
84509001 BATTEN CAP 1/8 DIA - KAYAK SAI
84513001 SAIL KIT KAYAK TURQ/PAPAYA
84514001 SAIL KIT KAYAK WHITE/RED
84515001 SAIL KIT KAYAK WHITE/TURQ
84516001 SAIL KIT KAYAK SILVER/WHITE
84517001 FURLER KIT-KAYAK SAIL
84517051 DOWNHAUL CLIP RED
84518001 FAIRLEAD DOUBLE KAYAK FURLER
84550001 MAST RECEIVER - MIRAGE KAYAK S
84560001 CAP, PLASTIC MAST RECEIVER
84612001 RUDDER BLADE, LARGE PRO A
84619001 STEERING RISER
84620101 1” RAM BALL / H-RAIL
HOBIEKAYAKS.COM
OS
OS
OS
OS
OS
-
PartDescription
84620151 1-1/2” RAM BALL / H-RAIL
84620152 GEAR HEAD / H-RAIL
84620153 MIGHTY MOUNT / H-RAIL
84620200 G-HOLD / H-RAIL
84620202 MINIPORT / H-RAIL
84620204 STARPORT HD / H-RAIL
84621001 CUP HOLDER / H-RAIL
84622001 MOUNTING PLATE / H-RAIL
84623001 TACKLE BIN / H-RAIL
84625001 ROD RACK / H-RAIL (ONE)
84625312 PA H-RAIL UPGRADE KIT PA12
84625314 PA H-RAIL UPGRADE KIT PA14
84626001 H-RAIL BOLT ON RAIL KIT 9”
84626101 H-RAIL BOLT ON RAIL KIT 21”
86505001 STEERING CRANK PA12
86505101 STEERING CRANK SUPPORT PLT PA1
86505121 DUAL STEERING LINE ASSEMBLY
86505401 SECONDARY STEERING HANDLE
86505601 LOWRANCE READY COVER PLATE
86505611 THRU HULL PLUG
86505613 THRU HULL 3 WAY PLUG KIT
86505621 HOBIE THRU HULL WIRING KIT
86505701 RUBBER ADAPTER PLUGS (TREE)
86506001 LOWRANCE ADAPTER
86506101 LOWRANCE STAR MOUNT ADAPTER
86506201 TRANSDUCER SUPPORT CLIP
86506601 FLOOR MAT PA12 LT
86506701 FLOOR MAT PA12 RT
86507501 VANTAGE XT CHAIR - COMPLETE
86509501 SCREW 10-32 X 1-3/4 PHMS SS
87363222 FLOOR STAND, MIRAGE RIGGING
87369116 BOOK, HOBIE-MASTER OF WATER,
88523101 BRACE ASSY (L) AKA TI -22”
88523102 BRACE ASSY (R) AKA TI -22”
88527001 TRAMP SET TI / 2015+ AI - BLAC
88527011 TRAMP SET TI / 2015+ AI - GRAY
88527201 TRAMP LEFT SIDE TI / 2015+ AI
88527301 TRAMP RIGHT SIDE TI / 2015+ AI
88991001 CENTERBOARD TDM ISLAND
88991011 CENTERBOARD TOP CVR-TDM ISLAND
88991021 CENTERBOARD PIN-TDM ISLAND
88991031 PIN HOLDER-TDM ISLAND
88991041 KNOB-TDM ISLAND
88991061 SIDE CARRY HANDLE
88991071 FURLER DRUM - TDM ISLAND
88991091 RUDDER BLADE, ISLAND
88991092 RUDDER HOUSING, ISLAND
88991094 GUDGEON, AI/TI
88991098 RUDDER REPLACEMENT KIT TI/AI
88991099 RUDDER-UP STRAP ASSY
88991101 RUDDER PIN-TDM ISL / 2011+ AI
88991121 MAST-TDM ISLAND ASSY (550 CM)
88991150 KNOB CAP-TDM ISLAND
88991151 DOME DECAL LG HANDLE, H LOGO
88991152 DOME DECAL SM HANDLE - H LOGO
88991191 V-FRAME STRUT 3/8-TDM ISLAND
88991201 V-FRAME BASE 3/8-TDM ISLAND
88991211 V-FRAME TURNBUCKLE 3/8-TDM ISL
88991215 SET SCREW, TI MAST V BRACE
88991221 CONNECTOR END, AKA BRACE
88991235 DOWEL PIN 3/16 x 1-1/2”
88991271 SPACER BLOCK - MAST CUP -TDM I
88991281 STEERING CRANK, AI/TI (2011)
88991301 STEERING HANDLE-TDM ISLAND
88991303 AMA - TDM ISLAND PAPAYA *
88991304 AMA - TDM ISLAND HIBISCUS DK *
88991305 AMA - TDM ISLAND DUNE *
88991311 MAST CAP AI/TI
88991314 AMA - TDM ISLAND HIBISCUS BR *
88991351 KNOB - STEERING HANDLE
88991352 KNOB CAP
88991355 KNOB ASSY. STEERING HANDLE
88995511 SAIL-TDM ISLAND 2015+ DUNE
88995512 SAIL-TDM ISLAND 2015+ SMOKE
88995513 SAIL-TDM ISLAND 2015+ BREEZE
88998514 SAIL-TDM ISLAND DUNE 3.8oz
88998515 SAIL-TDM ISLAND SMOKE 3.8oz
88998516 SAIL-TDM ISLAND BREEZE 3.8 OZ
88998521 BATTEN TI #1 3/8” x 186” W/CAP
88998522 BATTEN TI #2 3/16”x42.5” W/CAP
88998523 BATTEN TI#3 3/16”x 39.5” W/CAP
88998531 BATTEN CAP 1/4 DIA
88999519 BATTEN CAP 3/8 DIA (UAI)
90610111 DELRIN BALL 3/8 DIA - FURLERS
91011001 BATTEN CAP 3/16 DIA
91041011 BATTEN 3/16 FG ROD, 7’ 8-1/2”
91050010 HOOK WHT NYLON SEW-ON
91050020 HOOK BLK NYLON SEW-ON
91051011 BATTEN 3/16 FG ROD, 9’ 2”
99303001 ISLAND AMA V1 REPL-PAPAYA
99303501 AI AMA V2-PAPAYA
99304001 ISLAND AMA V1 REPL - OLD HIB
99304101 ISLAND AMA V1 REPL-NEW HIBISCU
99304501 AI AMA V2-HIBISCUS
99305001 ISLAND AMA V1 REPL-DUNE
99305501 AI AMA V2-DUNE
99600001 INSTALL TOOLS - MAST HOLE SAW
1553CR CROAKIES “HOBIE”
1553L LID LATCH MULTI-COLOR
1565BLK SUNGLASSES HOBIE ESCONDIDO
1825WHTTOYBOX
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
OS
71
INDEX
72
PartDescription
23015575-10 EXPLORER 3PC STRETCH 7.5 ADJ S
3188LG GLOVES HOBIE LARGE
3188MD GLOVES HOBIE MEDIUM
3188SM GLOVES HOBIE SMALL
3188XL GLOVES HOBIE X LARGE
3850LG HOBIE SPRAY TOP LG
3850MD HOBIE SPRAY TOP MD
3850SM HOBIE SPRAY TOP SM
3850XL HOBIE SPRAY TOP XL
3857LG SHIRT, MEN’S SPORT-T LS LG
3857MD SHIRT, MEN’S SPORT-T LS MD
3857SM SHIRT, MEN’S SPORT-T LS SM
3857XL SHIRT, MEN’S SPORT-T LS XL
3858LG SHIRT, MEN’S SPORT-T SS LG
3858SM SHIRT, MEN’S SPORT-T SS SM
3858XL SHIRT, MEN’S SPORT-T SS XL
3859LG SHIRT,LADIES SPORT-T SS VN LG
3859SM SHIRT,LADIES SPORT-T SS VN SM
3859XL SHIRT,LADIES SPORT-T SS VN XL
5016BL VISOR HOBIE BLUE
5018BL HAT HOBIE “H” BLUE / GOLD
5019BK HAT “HOBIE” 6-PANEL LO PRO BLK
5024LG HAT, AUSSIE LG (60cm/23.6”) KH
5024MD HAT, AUSSIE MD (58cm/22.8”) KH
5025MF HAT, MICROFIBER w/NECK FLAP KH
5026BM HAT, BEANIE MEN’S BLK w/ RED L
5026BW HAT, BEANIE WOMEN’S WHT w/LT B
5027FF HAT- FISHOUFLAGE
5027OM HAT- ODM
5027SBHAT-SANDBLASTED
5027SF HAT-SANDBLAST FISHING
5028LXL HAT, HOBIE PENGUIN FLEX-FIT LX
5030LXL HAT, HOBIE PATCH OLIVE/BLACK
5030SM HAT, HOBIE PATCH OLIVE/BLACK
5033LXL HAT, HOBIE PATCH GRAY/BLACK
5033SM HAT, HOBIE PATCH GRAY/BLACK
5037LXL HAT, PVC FLYING H RED
5037SM HAT, PVC FLYING H RED
5038LXL HAT, PVC FLYING H KHAKI
5038SM HAT, PVC FLYING H KHAKI
5351B HATCH COVER KIT 5” BLACK
5351W HATCH COVER KIT 5” WHITE
72000B POUCH GUSSETTED 6x12
72005B POUCH SUPER GUSSETED 8x15
72210T SEE BAG 8” X 14”
72230T SEE BAG 11” x 19”
80000R ROLLING DUFFLE/GEARBAG
80035A ANCHOR w/BAG & LINE (3.5 LB)
H071SPRING-STANDUP
H082 BLOCK-SINGLE BULLET
H083 BLOCK-BULLET W/BECKET
H092 BLOCK-BULLET CHEEK
H093 SPRING, MICRO CAM CLEAT MS-093
H166 BLOCK-BULLET SWIVEL
H167 BLOCK-BULLET SWIVEL W/BECKET
H2131 SHACKLE 4 MM BOW W/5/32” PIN
H224 BLOCK-MICRO SINGLE
H225 BLOCK-MICRO W/BECKET
H233 BLOCK-MICRO CHEEK
H2655 BLOCK, 40mm CARBO FIDDLE
H281 EYESTRAP-MICRO SS
H284 KIT-MICRO WIRE FAIRLEAD
H297 WEDGE KIT-MICRO CAM
H350 29mm CARBO CHEEK
H404 BLOCK-16MM AIR FXD SGL
H405 BLOCK-16MM AIR FIXED SGL W/BKT
H406 BLOCK-16MM AIR FIXED DOUBLE
H407 BLOCK-16MM AIR FIXED DBL W/BKT
H424B FAIRLEAD MICRO CAM - BLK
H471 CAM CLEAT-MICRO CARBO
MK0053 SAFTEY WHISTLES
RF4050 CLEAR START RACE TIMER
RF4052A CLEAR START SAILING WATCH
RF4850LG GLOVES-FINGERLESS LG STICKY
RF4850MD GLOVES-FINGERLESS MD STICKY
RF4850SM GLOVES-FINGERLESS SM STICKY
RF4850XL GLOVES-FINGERLESS XL STICKY
RF4850XS GLOVES-FINGERLESS XS STICKY
RF4851LG GLOVES-3 FINGER LG STICKY
RF4851MD GLOVES-3 FINGER MD STICKY
RF4851SM GLOVES-3 FINGER SM STICKY
RF4851XL GLOVES-3 FINGER XL STICKY
RF4851XS GLOVES-3 FINGER XS STICKY
RH014WHT LINE 1/4” STRAIT-CORE POLY
RH018WHT LINE 1/8” NYLON BRAID WHITE
RH038WHT LINE 3/8” STRAIT-CORE POLY
RH112WHT LINE 1/12” BRAID WHITE
RH316WHT LINE 3/16” STRAIT-CORE POLY
RH516WHT LINE 5/16” STRAIT-CORE POLY
RM014BLK LINE 1/4” SPUN DACRON - BLACK
RM014BLU LINE 1/4” SPUN DACRON - BLUE
RM014RED LINE 1/4” SPUN DACRON - RED
RM014WHT LINE 1/4” SPUN DBL BRD - WHITE
RM038BLK LINE 3/8” SPUN DACRON - BLACK
RM038BLU LINE 3/8” SPUN DACRON - BLUE
RM038RED LINE 3/8” SPUN DACRON - RED
RM038WHT LINE 3/8” SPUN DBL BRD - WHITE
RM516BLK LINE 5/16” SPUN DACRON - BLK
RM516BLU LINE 5/16” SPUN DACRON - BLUE
RM516RED LINE 5/16” SPUN DACRON - RED
RM516WHT LINE 5/16” SPUN DBL BRD-WHITE
OS
-
PartDescription
RM716BLK LINE 7/16” SPUN DACRON - BLACK
RM716BLU LINE 7/16” SPUN DACRON - BLUE
RM716RED LINE 7/16” SPUN DACRON - RED
RM716WHT LINE 7/16” SPUN DACRON - WHITE
RS014BLK SHOCKCORD 1/4” BLACK
RS018BLK SHOCKCORD 1/8” BLACK
RS038BLK SHOCKCORD 3/8” BLACK
RS316BLK SHOCKCORD 3/16” BLACK
RS516BLK SHOCKCORD 5/16” BLACK
RS716BLK SHOCKCORD 7/16” BLACK
S6100LG PFD THINBACK MANGO - LARGE
S6100MD PFD THINBACK MANGO - MEDIUM
S6100XL PFD THINBACK MANGO - X LARGE
S6101LG PFD THINBACK RED - LARGE
S6101MD PFD THINBACK RED - MEDIUM
S6101XL PFD THINBACK RED - X LARGE
S6102LG PFD THINBACK GR GREEN - LARGE
S6102MD PFD THINBACK GR GREEN - MEDIUM
S6102XL PFD THINBACK GR GREEN - X LARG
S6110LG PFD THINBACK MANGO (W) LG
S6110MD PFD THINBACK MANGO (W) MD
S6110SM PFD THINBACK MANGO (W) SM
S6114LG PFD THINBACK BLUE (W) LG
S6114MD PFD THINBACK BLUE (W) MD
S6114SM PFD THINBACK BLUE (W) SM
S6120LXL PFD EDGE RED LG/XL
S6120SMD PFD EDGE RED SM/MD
S6120XXL PFD EDGE RED XXL
S6770CMG PFD CHILD MANGO 30-50#
S6770IMG PFD INFANT MANGO <30#
S6770YMG PFD YOUTH MANGO 50-90#
S6779MG PFD INFLATABLE MANGO
S6779R PFD INFLATABLE REARM KIT
S6779RG PFD INFLATABLE RED/GRAY
S6779TG PFD INFLATABLE TAN/GRAY
S6780RG PFD BELT PACK SUP INFLATABLE R
S6800LXL PFD MIRAGE GRAY - LARGE/XL
S6800MLG PFD MIRAGE GRAY - MEDIUM/LG
S6800SMD PFD MIRAGE GRAY - SMALL/MED
S9000LG PET PFD LG MANGO 60-90#
S9000MD PET PFD MD MANGO 24-60#
S9000SM PET PFD SM MANGO 12-24#
S9000XL PET PFD XL MANGO >90#
S9000XS PET PFD XS MANGO <12#
SP150041 SHACKLE 5/32 X 3/8 X 5/8
SP150051 SHACKLE 3/16x1/2x11/16
SP150052 SHACKLE 3/16 x 5/8 x 5/16
SP150053 SHACKLE 3/16 X 5/8 X 1-7/16
SP150061 SHACKLE 1/4x9/16x15/16
SP170005 SHACKLE TWISTED SS 3/16
SP170006 SHACKLE TWISTED SS 1/4
SP180005 SHACKLE W/SAFETY KEY PIN 3/16”
SP180006 SHACKLE W/SAFETY KEY PIN 1/4”
SP185205 SHACKLE W/ SAFETY KEY PIN 3/16
V1093 SCREW-IN DECKPLATE 5” CRVD WH
V1100 SCREW-IN DECKPLATE 5” CRVD BLA
V1130 SCREW-IN DECKPLATE 4” CRVD WH
V1131 SCREW-IN DECKPLATE 4” CRVD BL
V1145 SCREW-IN DECKPLATE 6” WHITE W
V1146 SCREW-IN DECKPLATE 6” BLACK W/
OS
-
KAYAKING PARTS & ACCESSORIES: RECREATION & FISHING
The Hobie MirageDrive® will take you places you’ve never been before.
Discover new waters with Hobie.
hobiekayaks.com
HOBIEKAYAKS.COM
73
HOBIE CAT COMPANY
Holding Company
Oceanside, CA, U.S.A.
1-800-HOBIE-49
hobiecat.com
HOBIE CAT AUSTRALASIA
Subsidiary
Huskisson, NSW, Australia
1-800-4-HOBIE
hobiecat.com.au
HOBIE CAT EUROPE
Subsidiary
Toulon, France
+33 (0) 494 08 78 78
hobie-cat.net
HOBIE KAYAK EUROPE
Independent Distributor
Stellendam, The Netherlands
+31 (0) 187 499 440
hobie-kayak.com
HOBIE CAT BRASIL
Independent Distributor
Porto Belo, Santa Catarina, Brasil
+55 (47) 9746-9735
hobiecat.com.br
KAYAKING PARTS & ACCESSORIES
RECREATION & FISHING
I N T E R N AT I O N A L 8 7 3 6 7 0 3 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement