Kenwood DDX372BT Instruction manual

Add to my manuals
68 Pages

advertisement

Kenwood DDX372BT Instruction manual | Manualzz
DDX672BH
DDX492
DDX415BT
DDX392
DDX372BT
DDX320BT
DDX315
DDX272
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
This HD Radio receiver enables:
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/DDX320BT/DDX315/DDX272 Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2014 JVC KENWOOD Corporation
DDX̲Entry̲K.indb 1
B5A-0214-00 (KN/RN)
2014/08/30 19:05
CONTENTS
BEFORE USE............................................................ 2
How to reset your unit.................................................... 3
INITIAL SETTINGS .................................................. 4
BASICS .................................................................... 6
Component names and functions ............................. 6
Common operations ....................................................... 7
Common screen operations......................................... 9
Selecting the playback source...................................10
BEFORE USE
OTHER EXTERNAL COMPONENTS ...................... 32
Using external audio/video players—AV-IN ........32
Using a rear view camera ............................................33
BLUETOOTH (Only for DDX672BH/DDX492/
DDX415BT/DDX392/DDX372BT/DDX320BT) .... 34
iPod/iPhone ......................................................... 16
SETTINGS .............................................................. 42
Sound adjustment .........................................................42
Adjustment for video playback.................................43
Changing display design .............................................45
Customizing the <TOP MENU> screen .................46
Customizing the system settings .............................46
Setting menu items .......................................................48
APPs ...................................................................... 19
REMOTE CONTROLLER ........................................ 51
Pandora® (Only for DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272)........................ 20
CONNECTION/INSTALLATION ............................ 53
DISCS .................................................................... 11
USB........................................................................ 15
TUNER (Only for DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272) ............................ 22
HD Radio™ tuner
(Only for DDX672BH/DDX492) ........................... 24
SiriusXM® Satellite RADIO (Only for DDX672BH/
DDX492/DDX392/DDX372BT/DDX320BT/
DDX272) ............................................................... 27
REFERENCES ......................................................... 58
Maintenance ....................................................................58
More information ...........................................................58
Error message list ...........................................................61
Troubleshooting .............................................................63
Specifications...................................................................65
How to read this manual:
• Illustrations of DDX672BH are mainly used for explanation. The displays and panels shown in this manual
are examples used to provide clear explanations of the operations. For this reason, they may be different
from the actual displays or panels.
• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (RC-DV340: supplied only for DDX415BT/DDX315), see page 51.
• < > indicates the various screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
• Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the <Setup> menu. (Page 50)
• Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available
from <http://www.kenwood.com/cs/ce/>.
IMPORTANT
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARNINGS
and CAUTIONS in this manual. Please keep the
manual in a safe and accessible place for future
reference.
V WARNINGS: (To prevent accidents and
damage)
• DO NOT install any unit or wire any cable in a
location where;
– it may obstruct the steering wheel and gearshift
lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while driving, be
sure to look around carefully.
• The driver must not watch the monitor while
driving.
For DDX415BT/DDX315:
The marking of products using lasers
The label is attached to the chassis/case and says
that the component uses laser beams that have
been classified as Class 1. It means that the unit is
utilizing laser beams that are of a weaker class. There
is no danger of hazardous radiation outside the unit.
2
DDX̲Entry̲K.indb 2
2014/08/30 19:05
BEFORE USE
For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272:
V CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure. In compliance with Federal
Regulations, the following are reproductions of labels on,
or inside the product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top plate
FCC WARNING
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used in
accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT:
IC (Industry Canada) Notice
This device complies with Industry Canada licenseexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
The term “IC: ” before the certification/registration
number only signifies that the Industry Canada
technical specification were met.
CAUTION
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines
in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is
desirable that it should be installed and operated keeping
the radiator at least 20 cm or more away from person’s
body (excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
• Contains Transmitter Module
FCC ID : XQN-BTR60X
• Contains Transmitter Module
IC: 9688A-BTR601
V Cautions on the monitor:
• The monitor built into this unit has been
produced with high precision, but it may have
some ineffective dots. This is inevitable and is not
considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
For safety...
• Do not raise the volume level too much, as this
will make driving dangerous by blocking outside
sounds, and may cause hearing loss.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
❏ How to reset your unit
If the unit fails to operate properly, press the reset
button.
DDX672BH
DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272
ENGLISH
DDX̲Entry̲K.indb 3
3
2014/08/30 19:05
INITIAL SETTINGS
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 48)
1
<Demonstration>
(Page 49)
<Language>
(Page 50)
DDX672BH
<Angle>*
(Page 8)
<AV Input>
(Page 49)
DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272
<R-CAM
Interrupt>
(Page 33)
<Panel Color>
(Page 45)
Activate or deactivate the
display demonstration.
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]: initially
selected) or English
([English]).
Adjust the panel angle.
Setting the security function
❏ Registering the security code (only for
DDX415BT/DDX315)
You can set a security code to protect your receiver
system against theft.
1 Display the <TOP MENU> screen.
On the source control screen:
2 Display the <System> setting screen.
Select an external
component connected
to the iPod/Audio Video
input terminal to play.
Select [ON] when
connecting the rear view
camera.
Select the color of the
buttons on the monitor
panel.
2 Finish the procedure.
• Press [ ] repeatedly to change the page on
the <System> menu screen.
3 Display the <Security Code Set> screen.
The <TOP MENU> screen is displayed.
* Onlyfor D DX672BH.
• To clear the registered security code, perform
steps 1 and 2, then press [CLR] in <Security
Code>.
4
DDX̲Entry̲K.indb 4
2014/08/30 19:05
INITIAL SETTINGS
4 Enter a four-digit number (1), then
2
4 Set the clock time.
confirm the entry (2).
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
5 Repeat step 4 to confirm your security
code.
Clock settings
1 Display the <TOP MENU> screen.
On the source control screen:
• When the unit is being reset or disconnected from
the battery, you are required to enter the security
code. Enter the correct security code, then press
[Enter].
❏ Activating the security function
On the <TOP MENU> screen:
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to “00”.
2 Display the <Setup> screen.
You can activate the security function to protect
your receiver system against theft.
1 Display the <System> setting screen.
<Radio Data Synchronizes the clock time with
System>
FM RBDS.
<OFF>
Sets the clock manually. (See
below.)
5 Finish the procedure.
3 Display the <Clock> screen.
• Press [ ] repeatedly to change the page on
the <System> menu screen.
ENGLISH
DDX̲Entry̲K.indb 5
5
2014/08/30 19:05
BASICS
Component names and functions
V Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
DDX672BH
1 Monitor panel*
2 Screen (touch panel)
3 Reset button/Power indicator/Security indicator
• Resets the unit. (Page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 5)
4 Volume K/J button
Adjusts the audio volume. (Page 7)
5 AV/R-CAM button
• Displays the current source screen. (Press)
• The function of the button when held varies
depending on the <AV Key Long Press>
setting. (Page 50)
6 AUD button
Displays the <Equalizer> screen. (Press)
(Page 42)
7
MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 9)
• Turns on the power. (Press) (Page 7)
• Turns off the power. (Hold) (Page 7)
8 TEL/VOICE button
• Displays the <Hands Free> screen. (Press)
(Page 37)
• Activates voice dialing. (Hold) (Page 39)
9 M (Eject) button
• Ejects the disc (Tilts the monitor panel fully).
(Page 11)
• Opens/closes the monitor panel.
DDX415BT/DDX315
* You can change the color of the buttons on the monitor panel.
(Page 45)
1 Reset button/Power indicator/Security indicator
• Resets the unit. (Page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 5)
2 M (Eject) button
Ejects the disc. (Page 11)
3 Loading slot
4
MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 9)
• Turns on the power. (Press) (Page 7)
• Turns off the power. (Hold) (Page 7)
5 For DDX492/DDX392/DDX372BT/DDX320BT/
DDX272: AV/R-CAM button
For DDX415BT/DDX315: AV/V.OFF button
• Displays the current source screen. (Press)
• The function of the button when held varies
depending on the <AV Key Long Press>
setting. (Page 50)
DDX492/DDX392/DDX372BT/DDX320BT/DDX272
DDX492/DDX392/
DDX372BT/
DDX320BT
DDX272
DDX415BT
DDX315
6
DDX̲Entry̲K.indb 6
2014/08/30 19:05
BASICS
6 For DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT: TEL/VOICE button
• Displays the <Hands Free> screen. (Press)
(Page 37)
• Activates voice dialing. (Hold) (Page 39)
For DDX315/DDX272: AUD button
Displays the <Equalizer> screen. (Press)
(Page 42)
7 For DDX492/DDX392/DDX372BT/DDX320BT:
Volume/ATT/AUDIO knob
• Attenuates the sound. (Press) (See the far right
column.)
• Adjusts the audio volume. (Turn) (See the far
right column.)
• Displays the <Equalizer> screen. (Hold)
(Page 42)
For DDX272: Volume/ATT knob
• Attenuates the sound. (Press) (See the far right
column.)
• Adjusts the audio volume. (Turn) (See the far
right column.)
For DDX415BT/DDX315: Volume J/K buttons
Adjusts the audio volume. (Press) (See the far
right column.)
8 Monitor panel*
9 Screen (touch panel)
❏ Adjusting the volume
Common operations
To adjust the volume (00 to 35)
DDX672BH
❏ Turning on the power
DDX672BH
DDX415BT/DDX315
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT/
DDX315/DDX272
Press J to increase, and press K to decrease.
• Holding the button increases/decreases the
volume continuously.
❏ Turning off the power
DDX672BH
(Hold)
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT/
DDX315/DDX272
(Hold)
DDX492/DDX392/DDX372BT/
DDX320BT/DDX272
Turn to the right to increase, and turn to the left to
decrease.
To attenuate the sound (only for DDX492/
DDX392/DDX372BT/DDX320BT/DDX272)
* You can change the color of the buttons on the monitor panel.
(Page 45)
The ATT indicator lights up.
To cancel the attenuation: Press the same button
again.
ENGLISH
DDX̲Entry̲K.indb 7
7
2014/08/30 19:05
BASICS
❏ Adjusting the panel angle (only for
DDX672BH)
❏ Putting the unit in standby
❏ Turning off the screen
1 Display all the <TOP MENU> items.
• This operation works only when <AV Key Long
Press> is set to [V-OFF]. (Page 50)
DDX672BH
On the <TOP MENU> screen:
1 Display the <Angle Adjust> screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <Display> menu screen.
(Hold)
2
DDX492/DDX392/DDX372BT/
DDX320BT/DDX272
(Hold)
DDX415BT/DDX315
(Hold)
To turn on the screen: Press MENU on the
monitor panel, or touch the display.
2 Select an angle (0 – 6).
• To set the current position as the power off
position, select [Memory] for <Off Position>.
8
DDX̲Entry̲K.indb 8
2014/08/30 19:05
BASICS
Common screen operations
❏ Common screen descriptions
You can display other screens any time to change
the source, show the information, or change the
settings, etc.
Source control screen
Performs source playback operations.
• The operation buttons vary depending on the
selected source.
<TOP MENU> screen
Displays the source control screen and settings
screen.
• You can arrange the items to display on the <TOP
MENU> screen (Page 46)
❏ Touch screen operations
1
3
4
2
1
2
3
1 Displays the video control menu while playing a
video.
Common operating buttons:
1 Changes the playback source. (Page 10)
2 Displays all playback sources and items.
(Page 10)
3 Displays the <Setup> screen. (See below.)
1
2
Common operation buttons:
1 Displays the <TOP MENU> screen. (See the right
column.)
• Pressing MENU on the monitor panel also
displays the <TOP MENU> screen.
2 Displays/hides short-cut buttons. (Page 10)
2 Displays the source control screen while playing
a video.
<Setup> screen
Changes the detailed settings. (Page 48)
1
3
2
Common operating buttons:
1 Selects the menu category.
2 Displays the <TOP MENU> screen.
3 Changes the page.
4 Returns to the previous screen.
4
• The operation buttons disappear when the
screen is touched or when no operation is
done for about 5 seconds.
3 Goes to the previous chapter/track.*
4 Goes to the next chapter/track.*
* Not available for video from an external component.
ENGLISH
DDX̲Entry̲K.indb 9
9
2014/08/30 19:05
BASICS
Selecting the playback source
On the <TOP MENU> screen:
[DISC]
[HD Radio]*1
[TUNER]*2
[iPod]
[USB]
[SiriusXM]*3
[PANDORA]*3
4
[Bluetooth]*
[APPs]*5
Plays a disc. (Page 11)
Switches to the HD Radio
broadcast. (Page 24)
Switches to the conventional radio
broadcast. (Page 22)
Plays an iPod/iPhone. (Page 16)
Plays files on a USB device.
(Page 15)
Switches to the SiriusXM® Satellite
Radio broadcast. (Page 27)
Switches to the Pandora broadcast.
(Page 20)
Plays a Bluetooth audio player.
(Page 41)
Switches to the App screen from
the connected iPod touch/iPhone.
(Page 19)
[TEL]*4
Displays the <Hands Free> screen.
(Page 37)
[AV-IN1]*6
Switches to an external component
connected to the Audio Video
input terminal. (Page 32)
[AV-IN]*3 *5 or [AV-IN2]*5 *6
Switches to an external component
connected to the iPod/Audio Video
input terminal. (Page 32)
*1 Only for DDX672BH/DDX492.
*2 Only for DDX415BT/DDX392/DDX372BT/DDX320BT/DDX315/
DDX272.
*3 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*4 Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT.
*5 Select an appropriate input setting in <AV Input>. (Page 49)
*6 Only for DDX415BT/DDX315.
❏ Using short-cut buttons
While displaying the source control screen or the
<Setup> screen, you can use the short-cut buttons
to go to the items on the <TOP MENU> screen
indicated below.
To display the short-cut buttons
On the source control screen:
❏ Selecting the playback source on the
<TOP MENU> screen
On the <Setup> screen:
• You can change the items (other than [SETUP]) to
display on the <TOP MENU> screen. (Page 46)
To hide the short-cut buttons: Press [
].
10
DDX̲Entry̲K.indb 10
2014/08/30 19:05
DISCS
Playing a disc
• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 59.
❏ Inserting a disc
Insert a disc with the label side facing up.
DDX672BH
• If “ ” appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing “ ,”
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
❏ Ejecting a disc
DDX672BH
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
❏ Indications and buttons on the source
control screen
For video playback
1
2
3
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT/DDX315/
DDX272
DDX492/DDX392/
DDX372BT/
DDX320BT/DDX272
DDX415BT/DDX315
The source changes to “DISC” and playback starts.
• The IN indicator lights up while a disc is inserted.
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
15 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
Closing the monitor panel (only for DDX672BH)
After removing the disc, press M on the monitor
panel. The monitor panel closes.
4 5 6
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Current playback item information (title no./
chapter no./folder no./file no./track no.)
3 Playing time
4 Playback mode (Page 14)
5 File type
6 IN indicator
ENGLISH
DDX̲Entry̲K.indb 11
11
2014/08/30 19:05
DISCS
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
[MODE]
1 Media type
2 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Current playback item information (folder no./file
no./track no.)
4 Playback status
5 Playing time
6 Jacket picture (Shown while playing if the file has
tag data that includes the jacket picture)
7 Playback mode (Page 14)
8 File type
9 IN indicator
[
[
][
]
][
]
[
]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 14)
Selects a folder.
Selects playback mode.
(Page 14)
Displays the folder/track list. (See
the far right column.)
Stops playback.
Starts/pauses playback.
• Selects a chapter/track. (Press)
• Reverse/forward search. (Hold)
• Reverse/forward search during
playback.
• Plays back in slow-motion
during pause.
Displays the <TOP MENU> screen.
[o]
[IW]
[S] [T]
[O] [N]
[MENU]
[MODE]
For audio playback
1
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
2
3
4
[IW]
[S] [T]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 14)
Selects a folder.
Selects playback mode.
(Page 14)
Displays the folder/track list. (See
the right column.)
Starts/pauses playback.
Selects a track.
[O] [N]
[MENU]
Reverse/forward search.
Displays the <TOP MENU> screen.
5
[
][
[
[
6
7 8 9
]
][
]
]
❏ Selecting a folder/track on the list
1
2 Select the folder (1), then the item in the
selected folder (2).
• Repeat the procedure until you select the
desired track.
• If you want to play all tracks in the folder,
press [I] on the right of the desired folder.
• You can change the page to display more
items by pressing [ ]/[ ].
• Press [ ] to return to the root folder.
• Press [ ] to return to the upper layer.
12
DDX̲Entry̲K.indb 12
2014/08/30 19:05
DISCS
❏ Video menu operations
You can display the video menu screen during video
playback.
• The operation buttons disappear when the screen
is touched or when no operation is done for about
5 seconds.
For video playback except VCD
[ZOOM]
[Aspect]
[Picture
Adjust]
[Audio]
[Subtitle]
[Angle]
[ MENU]
[T MENU]
[Highlight]
[CUR]
Displays the picture size selecting
screen. (Page 44)
Selects the aspect ratio. (Page 44)
Displays the picture adjustment
screen. (Page 43)
Selects the audio type.
Selects the subtitle type.
Selects the view angle.
Displays the disc menu (DVD).
Displays the disc menu (DVD).
Switches to the direct disc menu
mode. Touch the target item to
select.
• To restore the screen, press AV on
the monitor panel.
Displays the menu/scene selecting
screen.
• [J] [K] [H] [I]: Selects an item.
– For DivX®: [H] [I] skips back or
forward by about 5 minutes.
• [Enter]: Confirms the selection.
• [Return]: Returns to the previous
screen.
[ MENU]
[Direct]
[Audio]
[Return]
[ZOOM]
[Aspect]
[Picture
Adjust]
Displays the disc menu.
Displays/hides the direct selecting
buttons. (See below.)
Selects the audio channel (ST: stereo,
L: left, R: right).
Displays the previous screen or menu.
Displays the picture size selecting
screen. (Page 44)
Selects the aspect ratio. (Page 44)
Displays the picture adjustment
screen. (Page 43)
• To deactivate the PBC function, stop playback,
then use the direct selecting buttons to select a
track number.
To select a track directly on a VCD
For VCD
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
• When you enter a wrong number, press [Direct/
CLR] to delete the last entry.
ENGLISH
DDX̲Entry̲K.indb 13
13
2014/08/30 19:05
DISCS
❏ Selecting playback mode
[
[
] Selects Random playback mode.
] Selects Repeat playback mode.
• Available playback modes differ depending on the
type of disc/file being played back.
• You cannot activate the repeat mode and the
random mode at the same time.
• Each time you press the button, the playback
mode changes. (The corresponding indicator
lights up.)
– Available items differ depending on the type of
disc/file being played back.
C-REP
T-REP
REP
FO-REP
FO-RDM
RDM
Repeats current chapter.
Repeats current title.
Repeats current track.
Repeats all tracks of the
current folder.
Randomly plays all tracks of
the current folder, then tracks
of the next folder.
Randomly plays all tracks.
To cancel Repeat/Random playback: Press the
button repeatedly until the indicator disappears.
Settings for disc playback
<Dynamic
Range
Control>
❏ Setting items
• Available items shown on the <DISC Mode>
screen differ depending on the type of disc/file
being played back.
<Menu
Language>
<Audio
Language>
<Subtitle
Language>
Select the initial disc menu language.
(Initial: English) (Page 61)
Select the initial audio language.
(Initial: English) (Page 61)
Select the initial subtitle language or
turn subtitles off (Off). (Page 61)
• Initial for DDX672BH/DDX492/
DDX392/DDX372BT/DDX320BT/
DDX272: Off, for DDX415BT/
DDX315: English
<Down Mix> When playing back a multi-channel
disc, this setting affects the signals
reproduced through the front and/or
rear speakers.
• Dolby Surround: Select this to
enjoy multi-channel surround
sound by connecting an amplifier
compatible with Dolby Surround.
• Stereo (initial): Normally select
this.
<Screen
Ratio>
You can change the dynamic range
while playing Dolby Digital software.
• Wide: Select this to enjoy a
powerful sound at a low volume
level with its full dynamic range.
• Normal: Select this to reduce the
dynamic range a little.
• Dialog (initial): Select this to
reproduce movie dialog more
clearly.
Select the monitor type to watch a
wide screen picture on the external
monitor.
16:9
4:3 LB
4:3 PS
(Initial)
<File Type>* Select the playback file type when a
disc contains different types of files.
• Audio: Plays back audio files.
• Still Image: Plays back picture files.
• Video: Plays back video files.
• Audio&Video (initial): Plays back
audio files and video files.
* For playable file types, see page 59.
If the disc contains no files of the selected type, the existing files are
played in the following priority: audio, video, then still picture.
14
DDX̲Entry̲K.indb 14
2014/08/30 19:05
USB
Connecting a USB device
You can connect a USB mass storage class device
such as a USB memory, Digital Audio Player etc. to
the unit.
• For details about connecting USB devices, see
page 56.
• You cannot connect a computer or portable HDD
to the USB input terminal.
• For playable file types and notes on using USB
devices, see page 60.
When a USB device is connected...
The source changes to “USB” and playback starts.
• All tracks in the USB device will be played
repeatedly until you change the source.
To disconnect the USB device safely:
Press [M], then disconnect the USB device after “No
Device” appears.
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
❏ Indications and buttons on the source
control screen
1
2
3
4
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of file being played
back.
[MODE]
[M]
[
[
][
]
Playback information
• The information displayed on the screen differs
depending on the type of file being played back.
[
]
1 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Current playback item information (folder no./file
no.)
3 Playback status
4 Playing time
5 Jacket picture (Shown while playing if the file has
tag data that includes the jacket picture)
6 Playback mode (See the right column.)
7 File type
[
]
5
]
6 7
[IW]
[S] [T]
[O] [N]
[MENU]
Changes the settings on the <USB
Mode> screen. (Page 16)
Disconnects the USB device safely.
Selects a folder.
Selects random playback mode.*1 *2
• FO-RDM: Randomly plays all
tracks in the folder.
• RDM: Randomly plays all tracks.
Selects repeat playback mode.*1 *2
• REP: Repeats the current track.
• FO-REP: Repeats all tracks in the
current folder.
Displays the folder/track list.
(Page 16)
Starts/pauses playback.
Selects a track.
Reverse/forward search.
Displays the <TOP MENU> screen.
*1 To cancel random or repeat mode, press the button repeatedly until
the indicator disappears.
*2 You cannot activate the repeat mode and the random mode at the
same time.
ENGLISH
DDX̲Entry̲K.indb 15
15
2014/08/30 19:05
iPod/iPhone
USB
❏ <USB Mode> settings
❏ Selecting a folder/track on the list
Setting <File Type>
[Audio]
Plays back audio files.
[Still Image]
Plays back picture files.
[Video]
Plays back video files.
[Audio&Video] Plays back audio files and video
(Initial)
files.
1
• For playable files, see page 60. If the USB device
contains no files of the selected type, the existing
files are played in the following priority: audio,
video, then still picture.
❏ Connecting iPod/iPhone
2 Select the folder (1), then the item in the
selected folder (2).
• Repeat the procedure until you select the
desired track.
• If you want to play all tracks in the folder,
press [I] on the right of the desired folder.
Setting <Screen Ratio>
Select the monitor type to watch a wide screen
picture on the external monitor.
[16:9] (Initial)
[4:3 LB]
[4:3 PS]
Setting <Drive Select>
Press [Next]. Switches between internal memory
and the memory source of the connected device
(such as mobile phone).
Preparation
• You can change the page to display more
items by pressing [ ]/[ ].
• Press [ ] to return to the root folder.
• Press [ ] to return to the upper layer.
• For details about connecting iPod/iPhone, see
page 56.
• For playable iPod/iPhone types, see page 60.
Connect your iPod/iPhone using the appropriate
cable according to your purpose.
• To listen to music: USB Audio cable for iPod/
iPhone
– For iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5: KCA-iP102 (optional
accessory)
– For iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5:
KCA-iP103 (optional accessory)
• To watch video and listen to music: USB Audio
and Video cable for iPod/iPhone—KCA-iP202
(optional accessory)
– You cannot connect iPod nano (7th Generation)/
iPod touch (5th Generation)/iPhone 5S/iPhone
5C/iPhone 5 with KCA-iP202.
16
DDX̲Entry̲K.indb 16
2014/08/30 19:05
iPod/iPhone
❏ Selecting preference settings for iPod/
iPhone playback
2
Playback operations
When the source is “iPod”...
1
[AV-IN]*1 / Select this when the iPod/iPhone
[AV-IN2]*2 is connected using KCA-iP102 or
KCA-iP103 (optional accessory).
[iPod]
Select this when the iPod/iPhone
is connected using KCA-iP202
(optional accessory).
2
<Audiobooks> Select the speed of audio
books.
<Artwork>
Shows/hides artwork of iPod.
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
❏ Indications and buttons on the source
control screen
1
2
3
4
*1 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*2 Only for DDX415BT/DDX315.
❏ Setting <AV Input> for iPod/iPhone
playback
Select an appropriate input setting for <AV Input>
according to the connection method of the iPod/
iPhone.
• You can change the setting only when [STANDBY]
is selected on <TOP MENU>. (Page 8)
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
5
67
Playback information
1 Song/video information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Track no./Total track number
3 Playback status
4 Playing time
5 Artwork (Shown if the song contains Artwork)
• To change the Artwork display, see the far left
column.
6 Playback mode (Page 18)
7 File type
ENGLISH
DDX̲Entry̲K.indb 17
17
2014/08/30 19:05
iPod/iPhone
Operation buttons
[MODE]
[
]
[
]
[
]
[IW]
[S] [T]
[O] [N]
[MENU]
Changes the settings for iPod/iPhone
playback on the <iPod Mode>
screen. (Page 17)
Selects random playback mode.*1
• RDM: Functions the same as
Shuffle Songs.
• A-RDM: Functions the same as
Shuffle Albums.
Selects repeat playback mode.
• REP: Functions the same as Repeat
One.
• ALL REP: Functions the same as
Repeat All.
Displays the audio/video file list. (See
the right column.)
Starts/pauses playback.
Selects an audio/video file.*2
Reverse/forward search.
Displays the <TOP MENU> screen.
❏ Selecting an audio/video file from the
menu
Video menu:
1
2 Select the menu (
: audio or
: video)
(1), a category (2), then a desired item
(3).
• Select the item in the selected layer until a
desired file starts playing.
• If you want to play all items in the layer, press
[I] on the right of the desired item.
Audio menu:
• You can change the page to display more
items by pressing [ ]/[ ].
• Press [ ] to return to the root folder.
• Press [ ] to return to the upper layer.
• Available categories differ depending on the type
of your iPod/iPhone.
*1 To cancel random mode, press the button repeatedly until the
indicator disappears.
*2 Resume playback is unavailable for video files.
18
DDX̲Entry̲K.indb 18
2014/08/30 19:05
APPs
You can use Apps of the connected iPod touch/
iPhone on this unit.
• You cannot use Apps with iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5.
❏ Operation buttons on the source
control screen
❏ Switching to the App screen while
listening to another source
• This operation works only when <AV Key Long
Press> is set to [APPs]. (Page 50)
DDX672BH
Preparation
1 Connect iPod touch/iPhone using KCA-
(Hold)
DDX492/DDX392/DDX372BT/
DDX320BT/DDX272
iP202. (Page 56)
2 Select [iPod] for <AV Input>. (Page 17)
Using an App
When the operation buttons are not displayed on
the screen, touch the screen to show them.
• To change settings for video playback, see
page 43.
❏ Playback operations
1 Start the App on your iPod touch/iPhone.
2 Select “APPs” as the source.
On the <TOP MENU> screen:
[I]
[W]
[S] [T]
[IW]
Starts playback.
Pauses playback.
Selects an audio/video file.
Starts/pauses playback.
[O] [N]
[MENU]
Reverse/forward search.
Displays the <TOP MENU> screen.
(Hold)
DDX415BT/DDX315
(Hold)
• You can operate some functions of the App on the
touch panel.
• For some applications such as navigation
applications, the operation buttons and
information are not shown. You can perform the
operations on the touch panel, such as scrolling
the map.
– If “ ” appears on the screen, the unit cannot
accept the touch operation you have tried to do.
• You can also play back the audio/video using
iPod/iPhone itself instead of the unit.
ENGLISH
DDX̲Entry̲K.indb 19
19
2014/08/30 19:05
Pandora® (Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/DDX272)
You can stream Pandora from iPod touch/
iPhone via a wired connection or from Android or
BlackBerry devices through Bluetooth.
• Install the latest version of the Pandora
application on your iPod touch/iPhone/Android/
BlackBerry.
• Android/BlackBerry devices can only be used
with DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT.
Preparation
Connect the device, then start the Pandora
application.
For Android/BlackBerry
“Connected” appears. Press [OK] to confirm the
operation.
When the connection is established, the
Pandora application is started and the
“PANDORA” source control screen is displayed.
For iPod touch/iPhone
1 Connect the iPod touch/iPhone to the
USB terminal using KCA-iP202, KCA-iP102
or KCA-iP103 (optional accessory).
(Page 56)
2 Start the Pandora application on the
connected iPod touch/iPhone.
The “PANDORA” source control screen is
displayed.
1 Pair the Android/BlackBerry device
through Bluetooth. (Page 34)
2 Select “PANDORA” as the source.
(Page 10)
3 Connect the Android/BlackBerry device for
using Pandora on the <Bluetooth Setup>
screen. (Page 36)
Playback operations
You can operate Pandora using the remote
controller. Only playing, pausing, and skipping are
available.
❏ Indications and buttons on the source
control screen
1
2
3
4
Playback information
1 Picture data (Shown if available from current
content and when iPod touch/iPhone is
connected via USB)
2 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Playback status
4 Playing time
Operation buttons
Bookmarks the artist.
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[IW]
[T]
[MENU]
Bookmarks the current track.
Adds the current artist to the Station
List.
Adds the current track to the Station
List.
Displays the list selecting screen.
(Page 21)
Thumbs down to the current track
and skips to the next track.
Registers the current track as a
favorite.
Starts/pauses playback.
Skips the current track.
• Not available when the Pandora
skip reaches its limit.
Displays the <TOP MENU> screen.
20
DDX̲Entry̲K.indb 20
2014/08/30 19:05
Pandora®
❏ Selecting a station from the list
1 Display the list selecting screen.
2 Select the list type.
• You can change the page to display more
items by pressing [ ]/[ ].
• The
indicator appears on the left of the
item when Shuffle is activated. (All songs on
the registered stations are played randomly.)
• The
indicator appears on the right of the
item when the station is shared.
On the Genre List
Select a genre (1), then a station (2).
<Station List>
<Genre List>
Selects from the station
names (Station List).
Selects from the genre names
(Genre List).
3 Select a station from the list.
On the Station List
• You can change the page to display more
items by pressing [ ]/[ ].
• The selected station is added to the Station
List.
Requirements for Pandora®
[Shuffle]
Plays all the songs in the registered
stations randomly.
[By Date] Sorts the list in reverse
chronological order.
[By Name] Sorts the list in alphabetical order.
iPhone or iPod touch
• Install the latest version of the Pandora application
on your iPhone or iPod touch. (Search for
“Pandora” in the Apple iTunes App Store to find
and install the most recent version.)
• Connect iPod touch/iPhone to this unit with
KCA-iP202, KCA-iP102 or KCA-iP103 (optional
accessory).
Android™
• Visit Google play and search for Pandora to install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
BlackBerry®
• Visit www.pandora.com from the built in browser
to download the Pandora application.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have a Pandora account,
you can create one for free from your smartphone
or at www.pandora.com.
• Pandora is available only in the U.S./Australia/New
Zealand.
• Because Pandora is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Pandora cannot be operated
from this unit.
• For issues using the application, contact Pandora
at [email protected]
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
ENGLISH
DDX̲Entry̲K.indb 21
21
2014/08/30 19:05
TUNER (Only for DDX415BT/DDX392/DDX372BT/DDX320BT/DDX315/DDX272)
Listening to the radio
❏ Indications and buttons on the source
control screen
1 2
4 5 6
3
7
Tuner reception information
1 Band
2 Preset no.
3 The station frequency currently tuned in
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
6 TI indicator
7 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
Operation buttons
[P1] – [P6]
• Selects a stored station. (Press)
• Stores the current station. (Hold)
[TI]*
Activates/deactivates TI standby
reception mode. (Page 23)
Presets stations automatically. (See
[AME ]
the right column.)
[MONO]*
Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[TEXT]
Changes the display information.
(See the right column.)
[PTY]*
Enters PTY search mode. (Page 23)
[AM]
Selects the AM band.
[FM]
Selects the FM band.
❏ Changing the display information
The preset list containing the station names for FM
RBDS (when a PS signal is coming in) is displayed.
• Press [TEXT] again to display the text information
for the station currently being received.
Presetting stations
[SEEK]
[S] [T]
[MENU]
Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
Displays the <TOP MENU> screen.
❏ Storing stations in the memory
You can preset 6 stations for each band.
Automatic presetting—AME (Auto Memory)
(Hold)
* Appears only when FM is selected as the source.
Local stations with the strongest signals are found
and stored automatically.
22
DDX̲Entry̲K.indb 22
2014/08/30 19:05
TUNER
Manual presetting
1 Tune in to a station you want to preset.
(Page 22)
2 Select a preset number.
FM RBDS features
❏ Searching for FM RBDS programs—PTY
Search
❏ Activating/deactivating TI Standby
Reception
You can search for your favorite programs being
broadcast by selecting the PTY code.
1
(Hold)
2 Select a PTY code.
The station selected in step 1 is stored.
❏ Selecting a preset station
(Hold)
• You can change the page to display more
items by pressing [ ]/[ ].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station providing RBDS signals.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
ENGLISH
DDX̲Entry̲K.indb 23
23
2014/08/30 19:05
HD Radio™ tuner (Only for DDX672BH/DDX492)
About HD Radio™ Technology
This HD Radio receiver enables:
❏ Indications and buttons on the source
control screen
12 3
• Program Service Data provides song name, artist,
station ID, and other relevant data streams
• Adjacent to traditional main stations are HD2/HD3
Channels, providing new original formats on the
FM dial
• HD Radio broadcasts deliver crystal clear, CD-like
digital audio quality to consumers
• When receiving analog signals, the ANALOG
indicator lights up.
Listening to the HD Radio™
broadcast
4
5
6 789 pq
HD Radio reception information
1 Band
2 Channel no.
3 Preset no.
4 The station frequency currently tuned in
5 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Message and PTY code.
6 ST indicator: Lights up when receiving an FM
stereo broadcast with sufficient signal strength.
7 Seek mode
8 TI indicator
9 HD indicator: Lights up when receiving an HD
Radio broadcast.
p MC indicator: Lights up when receiving an HD
Radio multicast channel.
q HD Radio reception mode (Page 25)
• When receiving digital signals, the DIGITAL
indicator lights up.
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[MODE]
Changes the settings for HD Radio
tuner reception on the <HD RADIO
Mode> screen. (Page 25)
[TI]*
Activates/deactivates TI standby
reception mode. (Page 25)
Presets stations automatically.
[AME ]
(Page 26)
[PTY]*
Enters PTY search mode. (Page 26)
Displays the <Preset List> screen.
[ ]
(Page 26)
[TEXT]
Displays/hides the information of the
current station.
[BAND]
Selects the band.
[SEEK]
Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T] Searches for a station.
• The search method differs according
to the selected seek mode. (See
above.)
Selects a sub-channel when receiving
[CHK]
an HD Radio multicast channel.
[CHJ]
[MENU]
Displays the <TOP MENU> screen.
* Appears only when FM is selected as the source.
24
DDX̲Entry̲K.indb 24
2014/08/30 19:05
HD Radio™ tuner
❏ Changing the display information
❏ Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes in digital or analog audio automatically
according to the receiving condition.
❏ Activating/deactivating TI Standby
Reception
1
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station.
2
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
The preset list containing the station names is
displayed.
• Press [TEXT] again to display the text information
for the station currently being received.
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
[Auto]
Switch between digital and analog
audio automatically.
[Digital] Select this to tune in digital audio
only.
[Analog] Select this to tune in analog audio
only.
ENGLISH
DDX̲Entry̲K.indb 25
25
2014/08/30 19:05
HD Radio™ tuner
❏ Searching for FM HD Radio programs—
PTY Search
Presetting stations
❏ Storing stations in the memory
You can search for your favorite programs being
broadcast by selecting the PTY code.
You can preset 6 stations for each band.
1
Automatic presetting—AME (Auto Memory)
❏ Selecting a preset station from the list
1
(Hold)
2 Select a station from the list.
2 Select a PTY code.
Local stations with the strongest signals are found
and stored automatically.
Manual presetting
1 Tune in to a station you want to preset.
(Hold)
• You can change the page to display more
items by pressing [ ]/[ ].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
(Page 24)
2 Select a preset number.
• You can change the page to display more
items by pressing [ ]/[ ].
(Hold)
The station selected in step 1 is stored.
26
DDX̲Entry̲K.indb 26
2014/08/30 19:05
SiriusXM® Satellite RADIO (Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/DDX272)
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best
sports, news, talk, comedy and entertainment.
Welcome to the world of satellite radio. A SiriusXM
Vehicle Tuner and Subscription are required. For
more information, visit www.siriusxm.com.
3 When the following screen appears, press
[Enter].
Activating subscription
1 Check your Radio ID.
The SiriusXM Satellite Radio ID is required
for activation and can be found by tuning to
Channel 0 as well as on the label found on the
SiriusXM Connect tuner and its packaging.
• The Radio ID does not include the letters I, O,
S or F.
Listening to the SiriusXM® Satellite
Radio
❏ Indications and buttons on the source
control screen
1 2
3
4
2 Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• For users in U.S.A:
– Online:
Visit www.siriusxm.com/activatenow
– Phone: Call SiriusXM Listener Care at
1-866-635-2349
• For users in Canada:
– Online:
Visit www.siriusxm.ca/activatexm
– Phone: Call XM customer Care at
1-877-438-9677
5
6
7
SiriusXM® Satellite Radio reception information
1 Band
2 Preset number
3 Information for the buffered data and the replay
mode (Page 29)
4 Channel number
5 Seek mode
6 Signal strength indicator
7 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
Operation buttons
[P1] – [P6]
• Selects a stored channel. (Press)
• Stores the current channel.
(Hold)
Changes the displayed
[Song Title]/
[Content Info]/ information each time this button
is pressed.
[Category]
[MODE]
Changes the settings for Sirius
XM Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages 29 – 31)
Skips or rewinds/fast forwards
[S] [T]
the content during replay mode.
(Page 29)
[SCAN]
Scans the first 6 seconds of the
buffered contents of the preset
channels and the currently tuned
channel. (Page 30)
[Live]
Returns to the live position from
the replay mode. (Page 29)
[TEXT]
Displays/hides the information of
the current channel. (Page 28)
Starts/pauses the content replay.
[IW]
(Page 29)
Obtain information on channels
[ ]
or select a category and then a
channel. (Page 28)
[BAND]
Selects the band.
[SEEK]
[CHK]/[CHJ]
[MENU]
Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
Selects the channel.
Displays the <TOP MENU> screen.
ENGLISH
DDX̲Entry̲K.indb 27
27
2014/08/30 19:05
SiriusXM® Satellite RADIO
❏ Changing the display information
❏ Selecting a preset channel
3 Select a channel.
On the <Preset List> screen
Select a band (1), and then select a preset
channel (2).
Selecting a channel
The preset list containing the channel names is
displayed.
• Press [TEXT] again to display the text information
for the station currently being received.
❏ Selecting a channel on the list
You can obtain information on channels or select a
category and then a channel.
On the <Channel List> screen
Select a category (1), and then select a channel
(2).
1 Display the <List Type Select> screen.
Presetting channels
❏ Storing channels in the memory
You can preset 6 channels for each band.
2 Select the list type.
1 Tune in to a channel you want to preset.
(Page 27)
2 Select a preset number.
(Hold)
The channel selected in step 1 is stored.
<Preset List>
Selects from the preset list.
• To preset the channels, see
the left column.
<Channel List> Selects from the channel
names (Channel List).
• You can change the page to display more
items by pressing [ ]/[ ].
• To list all the channels, select [All Channels].
• Pressing the info change button above the
list displays information in the following
order: Channel Name, Artist Name, Song Title,
Content Info.
28
DDX̲Entry̲K.indb 28
2014/08/30 19:05
SiriusXM® Satellite RADIO
❏ Replaying content
Replay
You can pause, rewind and replay content from the
currently tuned channel.
• The SiriusXM Connect Vehicle Tuner continually
buffers up to 60 minutes of audio.
• If you change to another channel during playback,
the Replay buffer content will be lost.
❏ Indications on the source control
screen
1
2
3
1 Playback status
2 Progress bar
Shows the remaining capacity (gray) and the
amount of buffered content (blue). If the Replay
buffer is full, the entire bar is indicated in blue.
• Updated every second.
3 Time code
Shows you the point in the Replay buffer you are
listening to.
• Example: –5:00
– You are listening to audio that is 5 minutes
behind the current broadcast.
• Updated every second.
• To pause the playback, press [IW].
• To skip the current track/segment, press [S]/
[T].
– Pressing [S] within 2 seconds of the
beginning of the current track/segment returns
to the previous track.
– Pressing [S] after 2 seconds or more of
the track have been replayed returns to the
beginning of the current track/segment.
• To rewind/fast forward, press and hold [S]/
[T].
• To return to the live position, press [Live].
SmartFavorites
User stored channels (P1 to P6) are recognized as
SmartFavorites channels. SiriusXM Connect Vehicle
Tuner automatically buffers their broadcast content
in the background. When you select a SmartFavorite
channel, you can rewind and replay up to 30
minutes of any of the missed news, talk, sports or
music content.
• SmartFavorites is available only when you connect
a SXV200 or later Sirius XM Connect Vehicle Tuner.
• If you change band, the buffered contents are
cleared.
TuneStart™
When you select a preset channel, you can listen to
the song from the beginning.
Activating TuneStart™
1
2
To deactivate TuneStart: Select [OFF] for
<Tune Start>.
ENGLISH
DDX̲Entry̲K.indb 29
29
2014/08/30 19:05
SiriusXM® Satellite RADIO
TuneScan™
You can check the buffered contents by scanning
the first 6 seconds of the buffered contents of the
preset channels and the currently tuned channel.
The unit starts scanning.
• To select the previous/next content, press [S]
or [T].
• To finish scanning and continue playing contents,
press [SCAN].
• To exit scanning, press and hold [SCAN].
Setting reception restrictions
2 Enter a four-digit code (1), and then
confirm (2).
1
2
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
3 Enter a new four-digit code (1), and then
confirm (2).
❏ Setting the parental control
[OFF]
Deactivates the parental mature and
user lock.
[Mature] Activates the parental mature
control.
[User]
Locks only the selected channels.
You can set the parental control in order to, for
example, restrict children from receiving adult
channels.
Setting/Changing the parental code
• The initial setting is “0000.”
• Changing the code does not change the
<Parental Control>/<Parental Lock Channel>
settings.
1 Display the <Parental Code Check>
screen.
Activating/Deactivating the parental control
You can set the parental control for all channels
classified as “mature” by SiriusXM® or for selected
channels by user.
3 Enter the parental code to confirm your
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
choice.
4 Enter the four-digit code and then press
[Enter] again to confirm the code.
30
DDX̲Entry̲K.indb 30
2014/08/30 19:05
SiriusXM® Satellite RADIO
Selecting the channels to lock—Parental Lock
Channel
This parental control option allows you to pick
the channels to be locked by the parental control
feature.
• When <Parental Control> is set to [Mature] or
[OFF], you cannot change the <Parental Lock
Channel> setting.
1
To deactivate the parental lock for all locked
channels: Select [All Clear] for <Parental Lock
Channel> on the <SiriusXM Mode> screen, then
enter the parental code number.
• You can change the page to display more
items by pressing [ ]/[ ].
• To list all the channels, select [All Channels].
• A checkmark appears beside the selected
channel.
❏ Skipping unwanted channels
Repeat this step if you want to skip multiple
channels.
If you do not want to receive some channels, you
can skip them.
Activating the channel skipping
1
To clear the channel skipping for all skipped
channels: Press and hold [All Clear] in <Channel
Skipping> on the <SiriusXM Mode> screen.
❏ Resetting the SiriusXM Satellite Radio
settings
You can reset the SiriusXM Satellite Radio settings
you made and restore the default settings.
1
2 Enter the parental code.
3 Select a category (1), and then a channel
(2).
• Press [ ] repeatedly to change the page on
the <SiriusXM Mode> screen.
2 Select a category (1), and then select a
channel (2)
2
(Hold)
• You can change the page to display more
items by pressing [ ]/[ ].
• To list all the channels, select [All Channels].
• A checkmark appears beside the selected
channel.
Repeat this step if you want to set the lock on
multiple channels.
ENGLISH
DDX̲Entry̲K.indb 31
31
2014/08/30 19:05
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
❏ Starting playback
2
1 Connect an external component.
(Page 56)
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 43.
You can connect an external component to the
Audio Video input terminal* and iPod/Audio Video
input terminal. (Page 56)
* Only for DDX415BT/DDX315.
2 For DDX415BT/DDX315: Select “AV-IN1”
or “AV-IN2” as the source.
• For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272: Select [AV-IN].
• For DDX415BT/DDX315: Select [AV-IN2].
On the <TOP MENU> screen:
❏ Indications and buttons on the source
control screen
1
❏ Preparation
Select an appropriate input setting for <AV Input>.
• Only for DDX415BT/DDX315: Perform the
following setting when using “AV-IN2”. No
preparation is required for “AV-IN1”.
• You can change the setting only when [STANDBY]
is selected on <TOP MENU>. (Page 8)
For DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272: Select
“AV-IN” as the source.
On the <TOP MENU> screen:
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
Playback information
1 AV-IN name
Operation buttons
[MODE]
Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name displayed on <TOP
MENU>.
[MENU]
Displays the <TOP MENU> screen.
3 Turn on the connected component and
start playing the source.
32
DDX̲Entry̲K.indb 32
2014/08/30 19:05
OTHER EXTERNAL COMPONENTS
Using a rear view camera
• To connect a rear view camera, see page 56.
• To use a rear view camera, a REVERSE lead
connection is required. (Page 55)
❏ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
To display the picture from the rear view camera
manually
• This operation works only when <AV Key Long
Press> is set to [R-CAM]. (Page 50)
DDX672BH
❏ Activating the rear view camera
(Hold)
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
DDX492/DDX392/DDX372BT/
DDX320BT/DDX272
(Hold)
• To erase the caution message, touch the screen.
• You can change the setting of the picture using
[Zoom]/[Aspect]/[Picture Adjust]. (Page 43)
DDX415BT/DDX315
(Hold)
To exit the rear view screen: Press and hold the
same button again.
2
To deactivate: Select [Off] for <R-CAM Interrupt>.
ENGLISH
DDX̲Entry̲K.indb 33
33
2014/08/30 19:05
BLUETOOTH (Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/DDX320BT)
Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using
the phonebook, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
Connecting Bluetooth devices
❏ Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• To use the registered device, you need to connect
the device to the unit. (Page 36)
Auto pairing
When <Auto Pairing> is set to [ON], iOS device
(such as iPhone) is automatically paired when
connected via USB. (Page 50)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1 Search the unit (“DDX ****”) from your
Bluetooth device.
2 Confirm the request both on the device
and the unit.
256950
OK
• Press [Cancel] to reject the request.
34
DDX̲Entry̲K.indb 34
2014/08/30 19:05
BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
2 Change the PIN code.
• If you skip changing the PIN code, go to step
3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 16.
4 Select the unit (“DDX ****”) for your
Bluetooth device.
DDX****
• If the PIN code is required, enter “0000”
(initial).
PIN code
0000
OK
When pairing is complete, the device is listed on
<Paired Device List>.
• Press [Clear] to delete the last entry.
3 Search the unit (“DDX ****”) from your
Bluetooth device.
• To use the paired device, connect the device
on <Paired Device List>. (Page 36)
ENGLISH
DDX̲Entry̲K.indb 35
35
2014/08/30 19:05
BLUETOOTH
❏ Connecting a registered Bluetooth
device
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are
displayed when the information is acquired
from the device.
1 Display the <Bluetooth Setup> screen.
(Page 35)
Using the Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
To disconnect
Select [TEL (HFP)], [Audio (A2DP)], or [PANDORA
(SPP)]* to disconnect the Bluetooth device being
used for that function on the <Paired Device List>
screen (see the left column).
2
* [PANDORA (SPP)] appears only for DDX672BH/DDX492/
DDX392/DDX372BT/DDX320BT.
❏ Deleting a registered Bluetooth device
3 Select the device you want to connect
(1), then select what you want to use the
device for (2).
*
1 Display the <Bluetooth Setup> screen.
(Page 35)
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 33)
To reject a call
2
3 Select a device to delete (1), then delete
the registration (2).
[TEL (HFP)]: for mobile phone
[Audio (A2DP)]: for Bluetooth audio player
[PANDORA (SPP)]: for Pandora*
• Selectable items depend on the device you
are operating.
• If you connect a device while another device
is connected, the device previously connected
is disconnected and the connection for the
newly connected device is established.
When <Auto Response> is set to [ON] (Page 41)
The unit answers the incoming call automatically.
*
❏ Ending a call
While talking...
A confirmation message appears. Press [Yes].
* [PANDORA (SPP)] appears only for DDX672BH/DDX492/
DDX392/DDX372BT/DDX320BT.
36
DDX̲Entry̲K.indb 36
2014/08/30 19:05
BLUETOOTH
❏ Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between –20 to
+8 (initial: 0).
• Use the monitor panel to adjust the call/earpiece
volume. (Page 7)
❏ Notification when SMS is received
❏ Making a call
If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has
been received when <SMS Notify> is set to [ON].
(Page 41)
• To read a received message, operate the mobile
phone after stopping the car in a safe place.
– You cannot read, edit, or send a message
through the unit.
• For some mobile phones, the notification message
may not be shown even if the SMS function is
supported.
1 Display the <Hands Free> screen.
❏ Reducing noise/adjusting the echo
cancel level
While talking...
❏ Switching between handsfree mode
and phone mode
• You can also display the <Hands Free> screen
by pressing TEL on the monitor panel.
2 Select a method to make a call.
1
While talking...
Each time you press the button, the talking
g method
is switched (
: handsfree mode /
:
phone mode).
On the <TOP MENU> screen:
2 3
4
• To adjust the echo volume (between 1 to 10,
initial: 4): Adjust <EC LEVEL>.
• To adjust the noise reduction volume (between
−5 to −20, initial: −7) : Adjust <NR LEVEL>.
1
2
3
4
From the phone book/call lists
Direct number entry
Voice dialing
Preset list
• To preset, see page 39.
ENGLISH
DDX̲Entry̲K.indb 37
37
2014/08/30 19:05
BLUETOOTH
From the phone book/call lists
1
• To use the A to Z search in the phone book:
When the <Phonebook> screen is displayed, you
can search by initial.
1
• To display the details of an entry:
When the <Phonebook> is displayed, you can
display the details of an entry and select a phone
number if several phone numbers are registered.
1 Display the details of the desired entry.
[Outgoing]
[Incoming]
[Missed]
[Phonebook]
From the dialed call list
From the received call list
From the missed call list
From the phone book
• To copy the phone book, see
page 39.
2 Select the initial.
• If the initial is not a letter or number, press
[Others].
3 Select a phone number from the list.
2 Select a phone number to call.
Direct number entry
You can enter up to 32 numbers.
• You can change the page to display more
items by pressing [ ]/[ ].
2
• Press [Clear] to delete the last entry.
• Press and hold [0+] to add “+” to the phone
number.
• Press [Preset] to save the entered phone number
onto the preset list.
38
DDX̲Entry̲K.indb 38
2014/08/30 19:05
BLUETOOTH
Voice dialing
• Available only when the connected mobile phone
has a voice recognition system.
1 Activate voice dialing.
❏ Presetting phone numbers
3
You can preset up to 6 phone numbers.
1 Display the <Hands Free> screen.
(Page 37)
On the <Hands Free> screen:
2 Select an item from the phone book/call
lists. (Page 38)
3 Select a phone number.
On the monitor panel:
DDX672BH
(Hold)
(Hold)
DDX492/DDX415BT/
DDX392/DDX372BT/
DDX320BT
4 Select a preset number to store into.
(Hold)
2 Say the name of the person you want to
call.
• If the unit cannot find the target, the following
screen appears. Press [Start], then say the
name again.
• You can also preset a phone number entered
on the <Direct Number> screen by pressing
[Preset]. (Page 38)
To delete the preset phone numbers: Initialize the
settings from <Initialize> in <Bluetooth Setup>.
(Page 50)
The PIN code (initial: 0000) necessary for
copying the phonebook from the mobile phone
and the number of copied phone book entries
are displayed.
4 Operate the target mobile phone.
• Refer to the instruction manual supplied with
your mobile phone.
• To cancel the transfer, press [Finish].
5 Finish the procedure.
❏ Copying the phone book
You can copy the phone book memory of a mobile
phone into the unit (up to 400 entries).
To cancel voice dialing: Press [Cancel].
1 Display the <Hands Free> screen.
The phone book memory is copied from the
mobile phone.
(Page 37)
2
ENGLISH
DDX̲Entry̲K.indb 39
39
2014/08/30 19:05
BLUETOOTH
About mobile phones compatible with Phone
Book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the phone book and call lists on the touch
panel screen when the mobile phone is connected.
• Phone book: up to 5 000 entries
• Dialed calls, received calls, and missed calls: up
to 50 entries each
❏ Deleting the phone number entries in
the unit
1 Display the phone book/call list you want
to delete. (Page 37)
2
Settings for Bluetooth mobile
phones
1 Display the <Hands Free> screen.
(Page 37)
2
To display the phone book/call lists of the
mobile phone or the unit
• You cannot delete data when [Phone] is
selected.
3 Select the item you want to delete.
[Phone]
Displays the phone book/call lists on
the connected mobile phone.
[System] Displays the phone book/call lists
copied to the unit.
• Press [All] to delete all the numbers/names in
the selected list.
A confirmation message appears. Press [Yes].
40
DDX̲Entry̲K.indb 40
2014/08/30 19:05
BLUETOOTH
❏ Setting items
Using the Bluetooth audio player
<Phone
Device>
<Auto
Response>
• To register a new device, see page 34.
• To connect/disconnect a device, see page 36.
Shows the connected phone device
name.
• ON: The unit answers the incoming
calls automatically in 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<SMS
• ON: The unit informs you of the
Notify>
arrival of a message by ringing and
displaying “Receiving Message”.
• OFF (Initial): The unit does not
inform you of the arrival of a
message.
<Ring
• System (Initial): The ring tone set on
Mode>
the unit is used.
• Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
<Ring Tone When <Ring Mode> is set to
Change>
<System>, press [Enter], then select
the ring tone for received calls and
SMS from <Tone1> (Initial), <Tone2>,
<Tone3>.
• Call Tone: Selects the ring tone for
phone calls.
• Message Tone: Selects the ring
tone for SMS.
❏ Indications and buttons on the source
control screen
12
3
Operation buttons
[S] [T]
[I]
[W]
[MENU]
• Selects a track. (Press)
• Reverse/forward search.* (Hold)
Starts playback.
Pauses playback.
Displays the <TOP MENU> screen.
* Available only for devices compatible with AVRCP 1.3.
4
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1 Playback status*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
• Pressing [<] scrolls the text if not all of the text
is shown.
4 The signal strength and battery level (only when
the information is acquired from the device)
ENGLISH
DDX̲Entry̲K.indb 41
41
2014/08/30 19:05
SETTINGS
Sound adjustment
2 Select a sound mode.
❏ Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/VCD
– CD
– DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
Storing your own adjustment—Customizing
preset sound mode
1 Select a sound mode. (See the far left
column.)
2 Select a band and adjust the level of the
selected band.
• You can change the page to display more
items by pressing [ ]/[ ].
• [Drive EQ] is a preset equalizer that reduces
noise from the road.
• You can adjust the level by dragging the
control or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
• You can also display the <Equalizer> screen
by pressing AUD (for DDX672BH/DDX415BT/
DDX315/DDX272) or by pressing and holding the
Volume/ATT/AUDIO knob (for DDX492/DDX392/
DDX372BT/DDX320BT) on the monitor panel.
3 Adjust the subwoofer level.
• The subwoofer level is adjustable only when
the subwoofer is activated. (Page 48)
The adjustments are stored and <User> is
activated.
42
DDX̲Entry̲K.indb 42
2014/08/30 19:05
SETTINGS
❏ Adjusting the crossover frequency
<HPF>
1 Display the <X’over> screen.
On the <TOP MENU> screen:
<LPF>
<Level>
<Phase>
<Freq>
Adjusts the crossover for the
front/rear speakers (high pass
filter).
Adjusts the crossover for the
subwoofer (low pass filter).*1
Adjusts the subwoofer level.*1
Selects the phase for the
subwoofer.*2
Adjusts the crossover frequency.
2 Select [DIM ON] (dimmer on) or [DIM OFF]
(dimmer off).
1
* Adjustable only when the subwoofer is activated. (Page 48)
*2 Not selectable when <Freq> is set to <Through>.
3 Adjust the picture (–15 to +15).
Adjustment for video playback
• When <X’over> is grayed out, you cannot
change the setting. Select [Unlock] on the
<SETUP Memory> screen to change the
setting. (Page 47)
❏ Adjusting the picture
You can adjust the picture quality.
1 Display the adjustment menu.
2 Select the item to adjust (1), then make
<Bright>
<Contrast>
<Black>
<Color>
<Tint>*
<Sharpness>
adjustments (2).
Adjusts the brightness.
Adjusts the contrast.
Adjusts the blackness.
Adjusts the color.
Adjusts the tint.
Adjusts the sharpness.
* Adjustable only when the incoming signal is NTSC.
• When the App screen is displayed, you can
press AV on the monitor panel to switch to the
picture adjustment menu.
ENGLISH
DDX̲Entry̲K.indb 43
43
2014/08/30 19:05
SETTINGS
❏ Changing the aspect ratio
<FULL>*
You can change the aspect ratio for video playback.
For 16:9 original pictures
4:3 signal
16:9 signal
1 Display the adjustment menu.
<JUST>
2 Select the aspect ratio.
For viewing 4:3 pictures
naturally on the wide screen
4:3 signal
16:9 signal
<Normal>*
For 4:3 original pictures
4:3 signal
16:9 signal
<Auto>
For “DISC”/“USB” only: The
aspect ratio is automatically
selected to match the incoming
signals.
* While DivX is played back with <Screen Ratio> set to [16:9]
(for DVD: Page 14/for USB: Page 16), the aspect ratio is not set
correctly.
❏ Zooming the picture
You can zoom the picture (<FULL>, <Zoom1> to
<Zoom3>).
• When <Aspect> is set to <JUST> or <Auto> (see
the left column), the picture is zoomed with the
aspect ratio of the <FULL> setting.
1 Display the adjustment menu.
2 Change the magnification (1), then move
the zooming frame (2).
• The zoom function cannot be used for some video
sources.
44
DDX̲Entry̲K.indb 44
2014/08/30 19:05
SETTINGS
You can change the background and panel color.
• The number of preset backgrounds and the
designs available differ depending on the
model.
1 Display the <User Customize> screen.
To select a panel color
Changing display design
On the <TOP MENU> screen:
*2
• Selecting [Scan] changes the illumination
color gradually.
*1 Store your own scene beforehand. (See the right column.)
*2 Store your own color adjustment beforehand. (See below.)
❏ Storing your own scene for the
background image
While playing a video or picture, you can capture an
image and use the captured image as a background.
• You cannot capture copyrighted content and
images from iPod/iPhone.
• When using a JPEG file as the background, make
sure that the resolution is 800 x 480 pixels.
• The color of the captured image may look
different from that of the actual scene.
1 Play a video or picture.
2 Display the <User Customize> screen.
(See the far left column.)
3
❏ Making your own color adjustment
1 Select [Panel Color] on the <User
Customize> screen. (See the left column.)
2 Select an item to change (background
4 Adjust the image.
2
design: [Background]/panel color: [Panel
Color]).
3 Select the dimmer setting for the color (1),
then adjust the color (2).
3 Select a background/panel color.
[J][K][H][I]
[
]
To select a background
[IW]*
[ ]*
*1
Moves the zooming frame.
Magnifies the scene. (<OFF>,
<Zoom1> – <Zoom3>)
Starts/pauses playback.
Advances scenes frame-byframe.
• To cancel the capture, press [Cancel].
Continued to the next page...
ENGLISH
DDX̲Entry̲K.indb 45
45
2014/08/30 19:05
SETTINGS
5 Capture the image displayed on the
screen.
2 Select where to place the icon (1), then
A confirmation message appears. Press [Yes] to
store the newly captured image. (The existing
image is replaced with the new one.)
• Press [No] to return to the previous screen.
* Not displayed when playing an external component connected to
the Audio Video input or iPod/Audio Video input terminal.
Customizing the <TOP MENU>
screen
You can arrange the items to display on the <TOP
MENU> screen.
1 Display the <Menu Customize> screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <Display> menu screen.
2
select the item you want to display in the
selected position (2).
• To cancel, press [No].
Repeat this step to place icons for other items.
3 Select an operation.
Customizing the system settings
❏ Memorizing/recalling the settings
• You can memorize the settings changed in the
<Setup> menu and recall the memorized settings
anytime.
• The memorized settings are kept even when the
unit is reset. (Page 3)
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
[Recall]
Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear]
Clears the currently memorized
settings.
• To cancel, press [Cancel].
A confirmation message appears. Press [Yes].
• When you perform recall or clear, the unit
enters standby mode after confirmation.
46
DDX̲Entry̲K.indb 46
2014/08/30 19:05
SETTINGS
❏ Locking the settings
❏ Adjusting the touch position
You can lock the settings to prevent them from
being changed.
• A
icon is shown beside the settings that can be
locked.
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
1 Display the <SETUP Memory> screen.
(Page 46)
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
3
2
To unlock the setting: Press [Unlock].
❏ Updating the system
You can update the system by connecting a USB
device containing an update file.
• For system updates, visit <http://www.kenwood.
com/cs/ce/>.
1 Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 56.
2 Display the <System Information>
screen.
On the <TOP MENU> screen:
• Press [ ] repeatedly to change the page on
the <System> menu screen.
<Application
Version>
<DVD Version>
<System
Version>
<Bluetooth
Version>*1
<HD Radio Tuner
Version>*2
Updates the system
application.
Updates the DVD system
application.
Updates the system.
Updates the Bluetooth
application.
Updates the HD Radio
module application.
2 Touch the center of the marks at the lower
left and at the upper right as instructed.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
* Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT.
*2 Onlyfor D DX672BH/DDX492.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
ENGLISH
DDX̲Entry̲K.indb 47
47
2014/08/30 19:05
SETTINGS
Setting menu items
❏ Displaying the <Setup> menu screen
❏ <Audio> setting screen
<Fader/Balance>
On the <TOP MENU> screen:
• You cannot change the <Audio> settings screen
when [STANDBY] is selected on the <TOP
MENU> screen. (Page 8)
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 42)
• Drive EQ (Initial)/Natural/Rock/Pops/Easy/
Powerful/Top40/Jazz/User
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level. The LOUD indicator lights up.
• OFF: Cancels.
<X’over>*
Adjust the crossover frequency. (Page 43)
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/VCD, CD,
and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) The
volume level will automatically increase or decrease
when you change the source.
• –15 to +6 (Initial: 0)
<Subwoofer>*
• ON (Initial): Activates the subwoofer.
• OFF: Deactivates the subwoofer.
<Bass Boost>
Select your preferred bass boost level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Speaker Select>*
Select the size of the connected speaker.
• Standard (Initial)/Narrow/Middle/Wide
* When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <SETUP Memory> screen to change the
setting. (Page 47)
48
DDX̲Entry̲K.indb 48
2014/08/30 19:05
SETTINGS
❏ <Display> setting screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required.
(Page 55)
• ON: Activates dimmer.
• OFF: Cancels.
<User Customize>
Change the display design (background and panel
color). (Page 45)
<OSD Clock>
• ON: Displays the clock while a video source is
played back.
• OFF (Initial): Cancels.
<Demonstration>
• ON (Initial): Activates the demonstration on the
screen.
• OFF: Cancels.
<Scroll>
• ON (Initial): Repeats scrolling.
• Once: Scrolls the displayed information once.
• OFF: Cancels.
Pressing [<] scrolls the text regardless of this setting.
<Menu Customize>
Change the items to display on the <TOP MENU>
screen. (Page 46)
<Screen Adjust>
Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select
[DIM ON] (dimmer on)/[DIM OFF] (dimmer off),
then change the following settings:
• Bright: Adjusts brightness.
– –15 to +15 (Initial: 0 for Dimmer On/+15 for
Dimmer Off)
• Black: Adjusts blackness.
– –15 to +15 (Initial: 0)
<Video Output>*1
Select the color system of the external monitor.
• NTSC (Initial), PAL
<Angle>*2
Adjust the panel angle. (Page 8)
❏ <Input> setting screen
<AV Input>
You can determine the use of the iPod/Audio Video
input terminal.
• AV-IN (Initial)*1: Select to use the AV component
connected to the iPod/AV-IN input terminal.
(Page 56)
• AV-IN2 (Initial)*2: Select to use the AV component
connected to the iPod/AV-IN2 input terminal.
(Page 56)
• iPod: Select to use iPod/iPhone connected using
the USB Audio/Video cable for iPod/iPhone.
(Page 56)
<R-CAM Interrupt>
• ON: Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF (Initial): Select this when no camera is
connected.
*1 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*2 Only for DDX415BT/DDX315.
*1 “Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
*2 Onlyfor D DX672BH.
ENGLISH
DDX̲Entry̲K.indb 49
49
2014/08/30 19:05
SETTINGS
❏ <System> setting screen
<Language>*1
Select the text language used for on-screen
information.
• English (Initial)/Español/Français/Deutsch/
Italiano/Nederlands/Ελληνικά/Português/
Türkçe/Čeština/Polski/Magyar/Руccĸий/
/
/
/
/
/
/Bahasa
Indonesia/
– For external monitors, only English/Spanish/
French/German/Italian/Dutch/Russian/
Portuguese are available. If another language
has been selected, the text language for external
monitors will be set to English.
• GUI Language: Select a language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
<Clock>
Adjust the clock time. (Page 5)
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<Remote Sensor>
• ON (Initial): Activates the remote sensor.
• OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 46)
<Bluetooth Setup>*2
Configure settings for using a Bluetooth device, such
as connection and other general operations.
• Paired Device List: Press [Enter] to show the list
of registered devices. You can connect the device
or delete the registration. (Page 36)
• PIN Code: Changes the PIN code of the unit.
(Page 35)
• Device Name: Shows the device name to be
shown on the Bluetooth device—”DDX****”.
• Device Address: Shows the device address of the
unit.
• Auto Connect:
– ON (Initial): The connection is automatically
established with the last connected Bluetooth
device when the unit is turned on.
– OFF: Cancels.
• Bluetooth HF/Audio: Select the speakers used for
Bluetooth (both phone and audio player).
– Front Only: From front speakers only.
– All (Initial): From all speakers.
• Auto Pairing:
– ON (initial): Establishes pairing automatically
with the connected iOS device (such as iPhone)
even if the Bluetooth function is deactivated on
the device. (Auto pairing may not work for some
devices depending on the iOS version.)
– OFF: Cancels.
• Initialize: Hold [Enter] to initialize all settings you
have made for using Bluetooth mobile phone and
Bluetooth audio player.
<AV Key Long Press>
Assigns the function of the AV button when held.
• V-OFF (Initial for DDX415BT/DDX315): Turns off
the screen. (Page 8)
• APPs: Displays the APPs screen.*3 (Page 19)
• R-CAM (Initial for DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272): Displays the
picture from the rear view camera. (Page 33)
<DivX® VOD>*4
This unit has its own Registration Code. Once you
have played back a file with the Registration Code
recorded, this unit’s Registration Code is overwritten
for copyright protection.
• Press [Enter] to display the information.
• To return to the previous screen, press [OK].
<Security Code>*4
Register the security code for the unit. (Page 4)
<SI>
Activate or deactivate the security function.
(Page 5)
<Serial Number>*5
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 47)
<Steering Remote Controller>*4
Assign the functions to the keys on the remote
controller of the steering wheel. (Contact your
Kenwood dealer for details.)
<System Information>
Displays the version information of the software.
You can update the software. (Page 47)
*1 “Please Power Off” appears when the setting is changed. Turn off
the power, then turn on to enable the change.
*2 Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT.
*3 Only displays the APPs screen when <AV Input> is set to
[iPod] (Page 17).
*4 Only for DDX415BT/DDX315.
*5 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
50
DDX̲Entry̲K.indb 50
2014/08/30 19:05
REMOTEC ONTROLLER
Overview
DDX415BT/DDX315:
This unit can be operated using the Remote
Controller (RC-DV340) supplied with this unit.
DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272:
Optional Remote Controller KNA-RCDV331 is
designed for controlling this unit. Refer to the
instruction manual that comes with the remote
controller.
V Caution:
• Put the Remote Controller in a place where it will
not move during braking or other operations. A
dangerous situation could result if the Remote
Controller falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled fluid
comes in contact with your eyes or on clothing,
immediately rinse with water and consult a
physician.
• Place the battery out of reach of children. In the
unlikely event that a child swallows the battery,
immediately consult a physician.
❏ Battery installation
Use two “AAA”/”R03”-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
Operations from the remote
controller
❏ Common operations (AUD mode)
SRC
• Selects the source.
• Hangs up the incoming/current call.
J/K VOL
Adjusts the volume level.
ATT
Attenuates/restores the sound.
DISP/V.SEL Does not function for this unit.
ENTER
Enters options.
Answers incoming calls.*1
• If the Remote Controller operates only over
shorter distances or does not operate at all, it is
possible that the batteries are depleted. In such
instances, replace both batteries with new ones.
❏ Remote Controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
AUDt
DVDt
T Vt
FNC/PBC/
MENU
Switches the control screen.
Changes the aspect ratio.
MODE/
• Aspect ratio changes each time you
TOP MENU
press this key.
OPEN
Adjusts the panel angle.*2
• The panel angle changes each time
you press this key.
*1 Availablefor D DX627BH/DDX492/DDX415BT/DDX372/DDX320BT
only.
*2 Available for DDX672BH only.
AUD mode: Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode: Switch to this mode when playing DVDs
or CDs etc. with the player integrated in this unit.
TV mode: Not used.
• The position of the remote control mode switch
is indicated in the title of each mode, e.g., “AUD
mode”.
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
ENGLISH
DDX̲Entry̲K.indb 51
51
2014/08/30 19:05
REMOTE CONTROLLER
❏ DVD/VCD (DVD mode)
J/K/H/I
S/T
I/W
o
0–9
Moves the cursor when displaying a
menu.
Selects a track.
Starts/pauses playback.
Stops and memorizes the point where
the disc stops.
• Specifies the number to search for
in direct search.
•
: Fast forwards/
backwards.
– Fast forward/backward speed
changes each time you press this
key.
•
: Slow forwards/
backwards during pause.
MODE/
Shows the disc top menu.
TOP MENU
FNC/PBC/
Shows the disc menu.
MENU
SUBTITLE Changes the subtitle language.
Changes the zoom ratio.
ZOOM
• Zoom ratio changes each time you
press this key.
Changes the picture angle.
ANGLE
• Picture angle changes each time
you press this key.
Changes the voice language.
AUDIO
• Voice language changes each time
you press this key.
Enters direct search mode. (See the far
DIRECT
right column.)
Deletes a character while in direct
CLEAR
search mode.
❏ Music Disc/Audio file/Video file/Picture
file (AUD mode)
AM –/FM + Selects a folder.
❏ iPod (AUD mode)
S/T
Selects music/videos.
I/W
Starts/pauses playback.
S/T
Selects a track/file.
I/W
Starts/pauses playback.
0–9
Specifies the number to search for in
direct search.
AM –/FM + Selects a folder.
S/T
Selects a file.
DIRECT
Enters direct search mode. (See the
right column.)
I/W
Starts/pauses playback.
❏ Radio/HD Radio*1/SiriusXM*2 (AUD
mode)
AM –/FM + Selects the band.
S/T
Searches for stations.
I/W
Changes the seek mode (AUTO1,
AUTO2, MANU).
0–9
• Specifies preset number. (
–
)
• Specifies the frequency of the
station to receive to search for in
direct search.
DIRECT
Enters direct search mode. (See the
right column.)
❏ USB (AUD mode)
Searching for an item (chapter/title/folder/file/
track) directly
1 Press DIRECT to enter the search mode.
Each time you press DIRECT, the item to search
for changes.
2 Press a number button to select a desired item.
3 Press ENTER to confirm the selection.
Searching for a tuner frequency directly
1 Press DIRECT to enter the search mode.
2 Press number buttons to enter a frequency.
3 Press ENTER to confirm the entry.
*1 Only for DDX672BH/DDX492.
*2 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
52
DDX̲Entry̲K.indb 52
2014/08/30 19:05
CONNECTION/INSTALLATION
Before installing the unit
V WARNING
• If you connect the ignition wire (red) and the
battery wire (yellow) to the car chassis (ground),
you may cause a short circuit, that in turn may
start a fire. Always connect those wires to the
power source running through the fuse box.
• Do not cut out the fuse from the ignition wire (red)
and the battery wire (yellow). The power supply
must be connected to the wires via the fuse.
V Precautions on installation and connection
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12 V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• If the power is not turned on (“Miswiring DC Offset
Error”, “Warning DC Offset Error” is displayed),
the speaker wire may have a short circuit or
have touched the chassis of the vehicle and the
protection function may have been activated.
Therefore, the speaker wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to a
power source with a constant voltage supply, such
as with battery wires, the battery may be drained.
• Only for DDX672BH:
If the console has a lid, make sure to install the
unit so that the monitor panel will not hit the lid
when closing and opening.
• If the fuse blows, first make sure the wires are not
touching to cause a short circuit, then replace the
old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit may
be damaged or fail to work if you share the ·
wires or ground them to any metal part in the car.
• When only two speakers are being connected to
the system, connect both connectors either to
the front output terminals or to the rear output
terminals (do not mix front and rear). For example,
if you connect the ª connector of the left speaker
to a front output terminal, do not connect the ·
connector to a rear output terminal.
• After the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
• Mount the unit so that the mounting angle is 30°
or less.
• Do not press hard on the panel surface when
installing the unit to the vehicle. Otherwise scars,
damage, or failure may result.
V CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal parts such as
the heat sink and enclosure become hot.
❏ Supplied accessories for installation
1
2
3
4
5
6
7
Wiring harness x 1
Trim plate x 1
Extension wire (2 m) x 1
Extraction keys x 2 *1
Flat head screws (M5 x 8 mm) x 6
Round head screws (M5 x 8 mm) x 6
Microphone (3 m) x 1 *2
*1 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*2 Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT.
ENGLISH
DDX̲Entry̲K.indb 53
53
2014/08/30 19:05
CONNECTION/INSTALLATION
❏ Installation procedure
1 To prevent a short circuit, remove the key
2
3
4
5
6
from the ignition and disconnect the ·
battery.
Make the proper input and output wire
connections for each unit.
Connect the speaker wires of the wiring
harness.
Connect the wiring harness wires in the
following order: ground, battery, ignition.
Connect the wiring harness connector to
the unit.
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (eg, the sound may skip).
7 Reconnect the · battery.
8 Press the reset button.
9 Configure <Initial Setup>. (Page 4)
❏ Installing the trim plate
Installing the unit
❏ Installing the unit (only for DDX672BH/
DDX492/DDX392/DDX372BT/
DDX320BT/DDX272)
1 Attach the trim plate (2).
2
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏ Installing the unit using the mounting
bracket removed from the car
5 or 6
Car Bracket
5 or 6
• Select the appropriate type of screw for the
mounting bracket: flat head (5) or round head
(6).
54
DDX̲Entry̲K.indb 54
2014/08/30 19:05
CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals
*1 Only for DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT.
*2 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*3 Only for DDX415BT/DDX315.
*4 If no connections are made, do not let the cable come out from the
tab.
USB terminal (0.8 m): See page 56.
See page 57.*1
10 A fuse
Connect SiriusXM
Connect Vehicle
Tuner (commercially
available). See page
56.*2
See page 56.*3
See page 56.
Connect the antenna cord
to the antenna terminal.
Purple with white stripe
(Reverse sensor wire)
Connect to the vehicle’s reverse lamp harness when using
the optional rear view camera.
Light green (Parking sensor wire)
1
3
White ª / White with black stripe · : To front speaker (left)
Gray ª / Gray with black stripe · : To front speaker (right)
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to connect
the parking sensor.
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Antenna control wire)
Blue with white stripe (Power control wire)
Brown (Mute control wire)
Light blue with yellow stripe (Steering remote control wire)
Orange with white stripe (Dimmer control wire)
*4 Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster amplifier
of the film-type antenna. (Max. 300 mA, 12 V)
When using the optional power amplifier, connect to its power control terminal.
Not used.
To use the steering wheel remote control feature, an exclusive remote adapter
(not supplied) matching your car is required.
To car light control switch
Ignition key switch
Red (Ignition wire)
Fuse box
Yellow (Battery wire)
To car chassis
Black (Ground wire)
Battery
ENGLISH
DDX̲Entry̲K.indb 55
55
2014/08/30 19:05
CONNECTION/INSTALLATION
❏ Connecting a USB device/iPod/iPhone
iPod nano (7th
iPod/iPhone except
Generation)/
for iPod nano (7th
iPod touch (5th Generation)/iPod touch
Generation)/iPhone (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5 5S/iPhone 5C/iPhone 5
(commercially available)
(commercially available)
❏ Connecting external components
DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272
DDX415BT/DDX315
KCA-iP103
(optional accessory)
USB device*
(commercially
available)
0.8 m
KCA-iP102
(optional
accessory)
0.8 m
0.8 m
KCA-iP202 (optional accessory)
DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/
DDX272
1 iPod/Audio Video input*1
• For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272: iPod/AV-IN
• For DDX415BT/DDX315: iPod/AV-IN2
2 Video output (Yellow)
3 Rear preout*2
• Audio left output (White)
• Audio right output (Red)
4 Front preout*2
• Audio left output (White)
• Audio right output (Red)
5 Subwoofer preout (monaural output)*2
• Subwoofer left output (White)
• Subwoofer right output (Red)
6 Expansion port for connecting SiriusXM Connect
Vehicle Tuner (commercially available)*3
7 Audio Video input (AV-IN1)*1 *4
8 Steering wheel remote controller input*4
• Connect to the vehicle’s steering remote
harness. Contact your Kenwood dealer for
details.
9 Rear view camera input (Yellow)
*1 When connecting the component to play on “AV-IN” or “AVIN1” /“AV-IN2”, use the Audio and Video cable CA-C3AV
(optional accessory).
*2 When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
*3 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*4 Only for DDX415BT/DDX315.
1.8 m
DDX415BT/DDX315
* Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)
56
DDX̲Entry̲K.indb 56
2014/08/30 19:05
CONNECTION/INSTALLATION
❏ Connecting microphone for Bluetooth
(only for DDX672BH/DDX492/
DDX415BT/DDX392/DDX372BT/
DDX320BT)
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
Removing the unit (Only for
DDX672BH/DDX492/DDX392/
DDX372BT/DDX320BT/DDX272)
❏ Removing the trim plate
1 Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
❏ Removing the unit
1 Remove the trim plate. (See the left
column.)
2 Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
4
2 Remove from the upper two catches.
• Be careful to avoid injury from the catch pins on
the extraction key.
7
• The frame can be removed from the top side in
the same manner.
ENGLISH
DDX̲Entry̲K.indb 57
57
2014/08/30 19:05
REFERENCES
Maintenance
❏ Caution on cleaning the unit
Do not use any solvent (for example, thinner,
benzine, etc.), detergent, or insecticide. This may
damage the monitor or the unit.
❏ To keep discs clean
Dirty discs may not play correctly.
If a disc does become dirty, wipe it with a soft cloth
in a straight line from center to edge.
Recommended cleaning method:
Gently wipe the panel with a soft, dry cloth.
❏ Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.
• Do not use any solvents (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
❏ To play new discs
New discs may have some rough spots around the
inner and outer edges. If such a disc is used, this unit
may reject the disc.
❏ How to handle discs
• When removing a disc from its case, press down
the center holder of the case and lift the disc out,
holding it by the edges.
– Always hold the disc by the edges. Do not touch
its recording surface.
• When storing a disc in its case, gently insert the
disc around the center holder (with the printed
surface facing up).
– Make sure to store discs in their cases after use.
• To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
More information
❏ File playback
Playing DivX files*
• This unit can play back DivX files with the
extension code <.divx>, <.div>, or <.avi>
(regardless of the letter case—upper/lower).
• Audio stream should conform to MP3 or Dolby
Digital.
• Files encoded in the interlaced scanning mode
may not be played back correctly.
• The maximum bit rate for video signals (average)
is 4 Mbps.
* Only for DDX415BT/DDX315.
Playing MPEG1/MPEG2 files
• This unit can play back MPEG1/MPEG2 files with
the extension code <.mpg>, <.mpeg>, or <.mod>.
• The stream format should conform to MPEG
system/program stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
Playing JPEG files
• This unit can play back JPEG files with the
extension code <.jpg> or <.jpeg>.
• This unit can play back JPEG files that are at 32 x
32 to 8 192 x 7 680 resolution.
It may take time to display the file depending on
its resolution.
• This unit can play back baseline JPEG files.
Progressive JPEG files or lossless JPEG files cannot
be played.
58
DDX̲Entry̲K.indb 58
2014/08/30 19:05
REFERENCES
Playing MP3/WMA/WAV/AAC-LC files
• This unit can play back files with the extension
code <.mp3>, <.wma>, <.wav> or <.m4a>
(regardless of the letter case—upper/lower).
• This unit can play back files that meet the
conditions below:
– Bit rate:
MP3: 8 kbps – 320 kbps
WMA: 5 kbps – 320 kbps
AAC: 16 kbps – 320 kbps
– Sampling frequency:
8 kHz – 48 kHz (for MP3/WMA)
44.1 kHz (for WAV)
32 kHz – 48 kHz (for AAC)
• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
• This unit can also show WAV/WMA/AAC Tag.
• This unit can play back files recorded in VBR
(variable bit rate).
• Files recorded in VBR have a discrepancy in
elapsed time indication.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional,
and voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA/AAC files copy-protected with DRM.
– AAC files encoded using any other application
than iTunes.
– AAC files copy-protected with FairPlay (except
those stored on an iPod).
– Files which have the data such as AIFF, ATRAC3,
etc.
• This unit can display jacket pictures that meet the
conditions below:
– Picture size: 32 x 32 to 1 232 x 672 resolution
– Data size: less than 650 KB.
– File type: JPEG
❏ Disc playback
Playable disc types
Disc type
DVD
• DTS sound cannot be
reproduced or emitted
from this unit.
DVD Recordable/Rewritable
(DVD-R/-RW*2, +R/+RW*3)
• DVD Video: UDF bridge
• DivX*4/MPEG1/MPEG2/
JPEG/MP3/WMA/WAV/AAC:
ISO 9660 level 1, level 2,
Romeo, Joliet
Dual Disc
CD/VCD
CD Recordable/Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2,
Romeo, Joliet
Recording format,
file type, etc.
DVD Video*1
• DVD Video
• DivX*4/MPEG1/
MPEG2
• JPEG
• MP3/WMA/
WAV/AAC
DVD side
• VCD (Video CD)
• Audio CD/
CD Text (CD-DA)
• VCD (Video CD)
• CD-DA
• MPEG1/MPEG2
• JPEG
• MP3/WMA/
WAV/AAC
*1 DVDRe gionc ode:
For DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/DDX272: 1
For DDX415BT/DDX315: 4
If you insert a DVD Video disc of an incorrect Region Code, “Region
Code Error” appears on the screen.
*2 DVD-R recorded in multi-border format is also playable (except for
dual layer discs). DVD-RW dual layer discs are not playable.
*3 It is possible to play back finalized +R/+RW (Video format only)
discs. “DVD” is selected as the disc type when a +R/+RW disc is
loaded. +RW double layer discs are not playable.
*4 Only for DDX415BT/DDX315.
Unplayable discs
• Unplayable disc types and formats are as follows:
– DVD-Audio/DVD-ROM discs
– MPEG4/DivX*/DVD-VR/DVD+VR/DVD-RAM
recorded in the DVD-R/RW or +R/+RW
– DTS-CD, SVCD (Super Video CD), CD-ROM, CD-I
(CD-I Ready)
– DivX/MPEG4 recorded in the CD-R/RW
• Discs that are not round.
• Discs with coloring on the recording surface or
discs that are dirty.
• Recordable/Rewritable discs that have not been
finalized.
• 3 inch discs. Attempting to insert using an adapter
may cause malfunction.
* Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product cannot be recommended.
ENGLISH
DDX̲Entry̲K.indb 59
59
2014/08/30 19:05
REFERENCES
Playing Recordable/Rewritable discs
• This unit can recognize a total of 5 000 files and
250 folders (a maximum of 999 files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped while
playing.
• Some discs or files may not be played back due to
their characteristics or recording conditions.
❏ About data stored in the connected
USB device/iPod/iPhone
• We bear no responsibility for any loss of data in an
iPod/iPhone and USB mass storage class device
while using this unit.
❏ USB playback
Playable files on a USB device
• This unit can play JPEG/DivX*/MPEG1/MPEG2/
MP3/WMA/WAV/AAC files stored in a USB mass
storage class device.
• This unit can recognize a total of 5 000 files and
250 folders (a maximum of 999 files per folder).
• Make sure all important data has been backed up
to avoid losing the data.
* Only for DDX415BT/DDX315.
Notes on using a USB device:
• This unit may not play back files in a USB device
properly when using a USB extension cable.
• USB devices equipped with special functions such
as data security functions cannot be used with the
unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be
loose.
• This unit may not recognize a memory card
inserted into the USB card reader.
• When connecting with a USB cable, use the USB
2.0 cable.
• The maximum number of characters (when the
characters are 1 byte):
– Folder names: 50 characters
– File names: 50 characters
• Avoid using the USB device if it might affect
driving safety.
• Do not pull out and connect the USB device
repeatedly while “Reading” is shown on the
screen.
• Electrostatic shock when connecting a USB device
may cause abnormal playback of the device. In this
case, disconnect the USB device then reset this
unit and the USB device.
• Operation and power supply may not work as
intended for some USB devices.
• Do not leave a USB device in the car, or expose
to direct sunlight or high temperatures to avoid
deformation or damage to the device.
❏ Notes on playing iPod/iPhone
• iPod/iPhone that can be connected to this unit:
Made for
– iPod with video
– iPod classic
– iPod nano (7th Generation)*
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod touch (5th Generation)*
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
– iPhone 5S*
– iPhone 5C*
– iPhone 5*
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
* You cannot watch video when connecting iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone 5S/iPhone 5C/
iPhone 5.
• When operating iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following KENWOOD web site:
<www.kenwood.com/cs/ce/ipod>
• For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
• When you turn on this unit, the iPod/iPhone is
charged through the unit.
• The text information may not be displayed
correctly.
60
DDX̲Entry̲K.indb 60
2014/08/30 19:05
REFERENCES
❏ Language codes (for DVD language selection)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Error message list
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
“No Signal”:
• Start the playback on the external component
connected to the Audio Video or iPod/Audio
Video input terminal.
• Check the cords and connections.
• Signal input is too weak.
“Miswiring DC Offset Error”/“Warning DC Offset
Error”:
• A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, then reset the unit.
(Pages 3 and 55)
“Parking Off”:
• No playback picture is shown when the parking
brake is not engaged.
“Authorization Error”:
• Check whether the connected iPod/iPhone is
compatible with this unit. (Page 60)
“USB Device Error”:
• The USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device.
“Panel Mecha Error”:
• The panel does not work properly. Reset the unit.
Continued to the next page...
ENGLISH
DDX̲Entry̲K.indb 61
61
2014/08/30 19:05
REFERENCES
“Connection Error”:
• The device is registered but the connection has
failed. Connect the registered device. (Page 36)
“Please Wait...”:
• The unit is preparing to use the Bluetooth
function. If the message does not disappear, turn
off and turn on the unit, then connect the device
again (or reset the unit).
“No Voice Device”:
• The connected mobile phone does not have a
voice recognition system.
“No Data”:
• No phone book data is contained in the connected
Bluetooth phone.
“Check App”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not started up.
• The Pandora application is not installed in the
connected device.
• An error has occurred in the Pandora application.
“Login Error”:
• You have not been signed into Pandora.
“No skips remaining”:
• No more songs can be skipped.
“Failed to save your thumb rating”:
• Thumb-up/down is prohibited.
“No Station”:
• No station is available.
“Initialize Error”:
• The unit has failed to initialize the Bluetooth
module. Try the operation again.
“No Active Station”:
• No station is being played.
“Dial Error”:
• Dialing has failed. Try the operation again.
“Station limit reached”:
• The Station List is full and no more stations can be
registered.
“Hung Up Error”:
• The call has not ended yet. Park your car, and use
the connected mobile phone to end the call.
“Pick Up Error”:
• The unit has failed to receive a call.
“Please update Pandora App”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not the latest
version. Update the application.
“Failed to save your bookmark”:
• The unit has failed to save a bookmark. Try the
operation again.
“Limited Connectivity”:
• The connection with the Pandora application
cannot be established.
“Pandora not available”:
• You cannot use the Pandora application from
the area where you are currently trying to access
Pandora.
“Try again later”:
• The Pandora server is under maintenance.
“Station does not exist”:
• The selected station has been deleted by another
device or has expired.
“Cannot create a Station”:
• You cannot create a station during the readonly mode or when network connection is not
established.
“SXM No Signal”:
• Make sure the SiriusXM Satellite Radio antenna is
mounted outside the vehicle. Move the vehicle to
an area with a clear view of the sky.
“SXM Check Antenna”:
• Check the SiriusXM Satellite Radio antenna
connection, and make sure the antenna is firmly
attached to the tuner.
• Check whether the SiriusXM Satellite Radio
antenna cable is bent or broken. If it is damaged,
replace the whole antenna unit.
“SXM Check Tuner”:
• Make sure the SiriusXM Connect Vehicle Tuner is
connected to the unit.
“SXM Chan Unavailable” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is no longer available. Select
another channel or continue listening to the
previous channel.
“SXM Ch Unsubscribed” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is not part of your current
subscription plan. Call 1-866-635-2349 to
subscribe.
62
DDX̲Entry̲K.indb 62
2014/08/30 19:05
REFERENCES
“SXM Subscription Updated – Press Enter to
Continue”:
• Your subscription has been updated. Press the
appropriate button to continue.
“SXM Channel Locked”
• The selected channel has been locked by the
parental controls. Enter the unlock code when you
are asked. (Page 30)
“SXM Incorrect Lock Code”
• The selected channel is a mature or parental lock
channel, and locked by the parental lock or user
lock code. Enter the correct lock code.
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components,
refer also to the instructions supplied with the
adapters used for the connections (as well as
the instructions supplied with the external
components).
The remote controller* does not work.
• Replace the battery.
❏ DivX*/MPEG1/MPEG2/JPEG/MP3/WMA/
WAV/AAC
* For DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/DDX272:
Purchase KNA-RCDV331 separately.
Discs cannot be played back.
• Record the tracks using a compliant application on
the appropriate discs. (Page 59)
• Add appropriate extension codes to the file
names.
The desired source button ([AV-IN], [AV-IN2] or
[APPs]) cannot be selected on the <TOP MENU>
screen.
• Select an appropriate setting for <AV Input>.
(Page 17)
❏ Discs in general
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
❏ General
Playback does not start.
• The file format is not supported by the unit.
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
* Only for DDX415BT/DDX315.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ USB
“Reading” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied onto the USB
device. Copy the tracks again, and try again.
No picture is displayed on the screen.
• Turn on the screen. (Page 8)
The unit does not work at all.
• Reset the unit. (Page 3)
ENGLISH
DDX̲Entry̲K.indb 63
63
2014/08/30 19:05
REFERENCES
❏ iPod/iPhone
❏ Tuner
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
AME automatic presetting does not work.
• Store stations manually. (Page 26)
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” of the iPod/iPhone.
For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
• Operate the unit after the Artwork has loaded.
Sound does not synchronize with the video.
• Select [iPod] for <AV Input>. (Page 17)
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202. Other cables cannot be used.
• Select [iPod] for <AV Input>. (Page 17)
Videos have no sound.
• Connect with USB Audio and Video cable
KCA-iP202. Other cables cannot be used.
• Select [iPod] for <AV Input>. (Page 17)
Static noise while listening to the radio.
• Connect the antenna firmly.
❏ AV-IN*1/AV-IN1*2/AV-IN2*2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
• For DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272: set <AV Input> to [AV-IN]
• For DDX415BT/DDX315: When “AV-IN2” is
selected as the source, set <AV Input> to
[AV-IN2].
*1 Only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT/
DDX272.
*2 Only for DDX415BT/DDX315.
❏ HD Radio reception (only for
DDX672BH/DDX492)
Sound quality changes when receiving HD Radio
stations.
• Fix the reception mode either to [DIGITAL] or
[ANALOG]. (Page 25)
No sound can be heard.
• The HD Radio reception mode is not appropriate.
Select the appropriate mode from [DIGITAL],
[ANALOG] or [AUTO].
❏ Pandora (only for DDX672BH/DDX492/
DDX392/DDX372BT/DDX320BT/
DDX272)
The Pandora application does not work.
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not the latest
version. Update the application.
❏ Bluetooth (only for DDX672BH/
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT)
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (If the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
64
DDX̲Entry̲K.indb 64
2014/08/30 19:05
REFERENCES
The unit does not pair with the Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 35)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234”.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume and the noise reduction
volume. (Page 37)
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.
Specifications
❏ Monitor section
Picture Size (W x H)
DDX672BH:
6.95 inches (diagonal) wide
156.6 mm × 81.6 mm (6-3/16" ×
3-3/16")
DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272:
6.2 inches (diagonal) wide
137.5 mm × 77.2 mm (5-7/16" ×
3-1/16")
Display System
Transparent TN LCD panel
Drive System
TFT active matrix system
Number of Pixels 1 152 000 (800H × 480V × RGB)
Effective Pixels
99.99%
Pixel Arrangement
RGB striped arrangement
Back Lighting
LED
❏ DVD player section
D/A Converter
Audio Decoder
24 bit
Linear PCM/Dolby Digital/MP3/
WMA/AAC/WAV
Video Decoder
MPEG1/MPEG2/DivX*
Wow & Flutter
Below Measurable Limit
Frequency Response
96 kHz Sampling: 20 Hz – 22 000 Hz
48 kHz Sampling: 20 Hz – 22 000 Hz
44.1 kHz Sampling: 20 Hz – 20 000 Hz
Total Harmonic Distortion
0.010% (1 kHz)
Signal to Noise Ratio
99 dB (DVD-Video 96 kHz)
Dynamic Range 99 dB (DVD-Video 96 kHz)
Disc Format
DVD-Video/VIDEO-CD/CD-DA
Sampling Frequency
44.1 kHz/48 kHz/96 kHz
Quantifying Bit Number
16/20/24 bit
* Only for DDX415BT/DDX315.
❏ USB interface section
USB Standard
USB 2.0 Full Speed
File System
FAT 16/32
Maximum Power Supply Current
DC 5 V 1 A
D/A Converter
Audio Decoder
Video Decoder
24 bit
MP3/WMA/AAC/WAV
MPEG1/MPEG2/DivX*
* Only for DDX415BT/DDX315.
❏ Bluetooth section (only for DDX672BH/
DDX492/DDX415BT/DDX392/
DDX372BT/DDX320BT)
Technology
Frequency
Output Power
Bluetooth 2.1 + EDR
2.402 GHz – 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE),
Power Class 2
Maximum Communication Range
Line of sight approx. 10 m
(32.8 ft)
Audio Codec
Profile
SBC
HFP (V1.5) (Hands Free Profile)
SPP (Serial Port Profile)
SDP (Service Discovery Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
GAP (Generic Access Profile)
ENGLISH
DDX̲Entry̲K.indb 65
65
2014/08/30 19:05
REFERENCES
❏ FM tuner section
❏ Video section
Frequency Range
DDX672BH/DDX492/DDX392/DDX372BT/
DDX320BT/DDX272:
87.9 MHz to 107.9 MHz (200 kHz)
DDX415BT/DDX315:
87.5 MHz to 108.0 MHz (50 kHz)
Color System of External Video Input
NTSC/PAL
Usable Sensitivity (S/N: 30 dB)
7.2 dBf (0.63 μV/75 Ω)
Video Input Level (RCA jack)
1 Vp-p/75 Ω
❏ General
Quieting Sensitivity (S/N: 50 dB)
15.2 dBf (1.58 μV/75 Ω)
Video Output Level (RCA jack)
1 Vp-p/75 Ω
Operating Voltage
Frequency Response (± 3.0 dB)
Digital:
20 Hz – 20 kHz*
Analog:
30 Hz – 15 kHz
Signal to Noise Ratio
Digital:
75 dB (STEREO)*
Analog:
68 dB (MONO)
Selectivity (± 400 kHz)
≥ 80 dB
Stereo Separation 40 dB (1 kHz)
* Only for DDX672BH/DDX492.
❏ AM tuner section
Frequency Range (10 kHz)
530 kHz to 1 700 kHz
Usable Sensitivity 29 dBμ
Frequency Response (± 3.0 dB)
Digital:
40 Hz – 15 kHz*
Signal to Noise Ratio
Digital:
75 dB (STEREO)*
External Video Input Level (mini jack)
1 Vp-p/75 Ω
External Audio Max Input Level (mini jack)
2 V/25 kΩ
❏ Audio section
Maximum Power (Front & Rear)
50 W × 4
Full Bandwidth Power (Front & Rear)
(4 Ω, 14.4 V, 1% THD)
22 W × 4
Preout Level
4 V/10 kΩ
Preout Impedance ≤ 600 Ω
Speaker Impedance 4 Ω – 8 Ω
Graphic Equalizer
BAND
5 Band
Frequency (Hz) (BAND1-5)
80/200/800/4k/12.5k
Gain
-8/-7/-6/-5/-4/-3/-2/-1/
0/1/2/3/4/5/6/7/8 [dB]
2Way X'Over
HIGH PASS FILTER frequency
Through/63/100/120/150/
180 [Hz]
LOW PASS FILTER frequency
55/85/120/160/Through [Hz]
Subwoofer Level
–50 dB to +10 dB
14.4 V (10.5 V – 16 V allowable)
Maximum Current Consumption
10 A
Installation Dimensions (W × H × D)
DDX672BH:
182 mm × 111 mm × 165 mm
(7-3/16" × 4-7/16" × 6-1/2")
DDX492/DDX392/DDX372BT/DDX320BT/DDX272:
182 mm × 111 mm × 160 mm
(7-3/16" × 4-7/16" × 6-5/16")
DDX415BT/DDX315:
178mm × 100 mm × 162 mm
(7" × 3-7/8" × 6-3/8")
Operational Temperature Range
–10°C – +60°C
Weight
DDX672BH:
2.3 kg (5.1 lbs)
DDX492/DDX415BT/DDX392/DDX372BT/
DDX320BT/DDX315/DDX272:
1.7 kg (3.7 lbs)
Design and specifications are subject to change
without notice.
* Only for DDX672BH/DDX492.
66
DDX̲Entry̲K.indb 66
2014/08/30 19:05
REFERENCES
❏ Trademarks and licenses
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• “DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan
and other countries.
• The “AAC” logo is a trademark of Dolby
Laboratories.
• Microsoft and Windows Media are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• “Made for iPod,” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod, or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPod, or iPhone may affect
wireless performance. iPhone, iPod, iPod classic,
iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other
countries.
• Lightning is a trademark of Apple Inc.
• This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
• Font for this product is designed by Ricoh.
• DivX Certified® to play DivX® video, including
premium content.
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
• ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that has passed rigorous testing to verify
that it plays DivX video. Visit divx.com for more
information and software tools to convert your
files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu (Page 50). Go to vod.divx.com for more
information on how to complete your registration.
• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA,
LLC. SEE HTTP://WWW.MPEGLA.COM.
• Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and
“Arc” logos are proprietary trademarks of iBiquity
Digital Corp.
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
• Android is a trademark of Google Inc.
• BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property
of Research In Motion Limited and are registered
and/or used in the U.S. and countries around
the world. Used under license from Research In
Motion Limited.
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by JVC KENWOOD
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
ENGLISH
DDX̲Entry̲K.indb 67
67
2014/08/30 19:05
DDX̲Entry̲K.indb 1
2014/08/30 19:05

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement