Samsung | AQ09 Series | Installation manual | Samsung AQ09 Series Installation manual

AS09E ✴✴ Series
AS12E ✴✴Series
AS18E ✴✴ Series
AS19E ✴✴ Series
AS24E ✴✴ Series
AS25E ✴✴ Series
AQ09E ✴✴Series
AQ12E ✴✴Series
AQ18E ✴✴Series
AQ24E ✴✴Series
Air Conditioner
user & installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
E
S
F
A
DB98-32962A(6)
AF-SD ❮❮❮Series
Features of your new air conditioner
Contents
USING PARTS
On those hot sweltering summer days and long restless
nights, there is no better escape from the heat than the
cool comforts of home. Your new air conditioner brings an
end to exhausting hot summer days and lets you rest. Beat
the heat with your own air conditioner this summer.
Look for Everywhere
The elegant and harmonious design gives priority
to the esthetics of your space and complements any
of your existing interior décor. With its soft color and
rounded-edge shape, the new air conditioner adds class
functionally and esthetically.
function
function allows you to set a comfortable
sleep temperature while saving energy and having sound
sleep.
Safety precautions ......................................................................... 3
Checking before use ..................................................................... 6
Checking the name of the parts ............................................. 7
Checking the remote controller .............................................. 8
Basic function ................................................................................ 10
............................................ 12
Using the Turbo function ......................................................... 12
mode ................................................................... 13
.......................................................... 14
Using the Smart Saver function ........................................... 15
Using the SPi function ....................................................... 15
Using the Auto Clean function ............................................. 16
Using the filter reset .......................................................... 16
Cleaning the air conditioner .................................................. 17
Maintaining the air conditioner ........................................... 19
Troubleshooting .......................................................................... 20
INSTALLATION PARTS
Safety precautions ...................................................................... 22
Choosing the installation location ...................................... 23
Accessories ................................................................................... 26
Fixing the installation plate .................................................... 27
Connecting the assembly cable ..................................... 28
Installing and connecting the assembly
pipe of the indoor unit ............................................................. 30
Purging the indoor unit ........................................................ 31
Cutting or extending the pipe .............................................. 31
Installing and connecting the
drain hose of the indoor unit ................................................. 32
Changing direction of the drain hose ............................... 33
Installing and connection of the
drain hose of the outdoor unit .......................................... 34
Purging the connected pipes ................................................ 34
Performing the gas leak tests ................................................ 36
Fixing the indoor unit in place .............................................. 37
Fixing the outdoor unit in place ........................................... 37
Final check and trial operation .............................................. 38
Pump down procedure
(when removing the product) ............................................. 38
How to connect your extended power cables .......... 39
2
USING PARTS
Safety precautions
Before using your new air conditioner, please read this manual thoroughly to ensure that you know how to safely and
ENGLISH
online at www.samsung.com.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Unplug the power plug from the
wall socket.
Do NOT attempt.
Do NOT disassemble.
Make sure the machine is grounded to prevent electric shock.
FOR INSTALLATION
WARNING
appliance only. In addition, do not use an extension cord.
u Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
u Do not use an electric transformer. It may result in electric shock or fire.
u If the voltage/frequency/rated current condition is different, it may cause fire.
Failing to do so may result in electric shock, fire, explosion, problems with the product, or injury.
Install a switch and circuit breaker dedicated to the air conditioner.
u Failing to do so may result in electric shock or fire.
u
u
Failing to do so may result in electric shock or fire.
location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where
gas may leak.
u This may result in electric shock or fire.
Never install the outdoor unit in a location such as on a high external wall where it could fall.
u If the outdoor unit falls, it may result in injury, death or property damage.
This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
u Failure to do so may result in electric shock, fire, an explosion, or other problems with the product.
u Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and
national codes.
FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
u Failing to do so may result in electric shock or fire due to electric leakage.
Failing to do so may result in abnormal vibrations, noise, or problems with the product.
Install the draining hose properly so that water is drained correctly.
u Failing to do so may result in water overflowing and property damage.
When installing the outdoor unit, make sure to connect the draining hose so that draining is performed correctly.
u The water generated during the heating operation by the outdoor unit may overflow and result in property damage.
In particular, in winter, if a block of ice falls, it may result in injury, death or property damage.
u
3
Safety precautions
FOR POWER SUPPLY
WARNING
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth
on a regular basis.
u Unplug the power plug and clean it with a dry cloth.
u Failing to do so may result in electric shock or fire.
If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and
this may result in electric shock or fire.
When the appliance or power plug or power cord is damaged, contact your nearest service center.
u
socket.
u This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
u Unplug the power plug by holding the plug.
u Failing to do so may result in electric shock or fire.
Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a
metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord
into the space behind the appliance.
u This may result in electric shock or fire.
FOR POWER SUPPLY
CAUTION
When not using the air conditioner for a long period of time or during a thunder/lightning storm, cut the power at the
circuit breaker.
u Failing to do so may result in electric shock or fire.
FOR USING
WARNING
Failing to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact
your nearest service center.
u Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do
not touch the appliance or power cord.
u Do not use a ventilating fan.
u A spark may result in an explosion or fire.
To reinstall the air conditioner, please contact your nearest service center.
u Failing to do so may result in problems with the product, water leakage, electric shock, or fire.
u A delivery service for the product is not provided. If you reinstall the product in another location, additional construction
expenses and an installation fee will be charged.
u Especially, when you wish to install the product in an unusual location such as in an industrial area or near the seaside where it is
exposed to the salt in the air, please contact your nearest service center.
u
Do not touch the power plug or the circuit breaker with wet hands.
u This may result in electric shock.
Plugging the power plug into the wall outlet or turning the air conditioner on from the circuit breaker may cause a spark and
result in electric shock or fire.
After unpacking the air conditioner, keep all packaging materials well out of the reach of children, as packaging materials
can be dangerous to children.
u If a child places a bag over its head, it may result in suffocation.
u
u Take special care that children do not injure themselves by inserting their fingers into the product.
u
This may result in electric shock or burns.
Take special care that children do not injure themselves by inserting their fingers into the product.
Do not strike or pull the air conditioner with excessive force.
u This may result in fire, injury, or problems with the product.
u
4
FOR USING
WARNING
Do not place an object near the outdoor unit that allows children to climb onto the machine.
u This may result in children seriously injuring themselves.
ENGLISH
u
Since this may be dangerous due to a lack of oxygen, Open a window at least once an hour.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and
u
Failing to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
u Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
u Failing to do so may result in electric shock, fire, problems with the product, or injury.
FOR USING
CAUTION
Do not place objects or devices under the indoor unit.
u Water dripping from the indoor unit may result in fire or property damage.
Check that the installation frame of the outdoor unit is not broken at least once a year.
u Failing to do so may result in injury, death or property damage.
Max current is measured according to IEC standard for safety and current is measured according to ISO standard for
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes,
chemicals, metal objects, etc.) on the appliance.
u This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
u This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
u As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not drink the water from the air conditioner.
u The water may be harmful to humans.
Do not apply a strong impact to the remote controller and do not disassemble the remote controller.
Do not touch the pipes connected with the product.
u This may result in burns or injury.
Do not use this air conditioner to preserve precision equipment, food, animals, plants or cosmetics, or for any other
unusual purposes.
u This may result in property damage.
This may result in harm to humans, animals or plants.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
u
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the
appliance.
u This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
u Failing to do so may result in electric shock or fire.
FOR CLEANING
CAUTION
Take care when cleaning the surface of the heat exchanger of the outdoor unit since it has sharp edges.
u To avoid cutting your fingers, wear thick cotton gloves when cleaning it.
Do not clean the inside of the air conditioner by yourself.
u For cleaning inside the appliance, contact your nearest service center.
u When cleaning the internal filter, refer to the descriptions in the ‘Cleaning the air conditioner’ section.
u Failure to do may result in damage, electric shock or fire.
5
Checking before use
Operation ranges
The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the
Mode
Indoor temperature
Outdoor temperature
Indoor humidity
Cooling
16˚C~32˚C
15°C~52°C
Relative humidity 80% or less
Dry
18˚C~32˚C
15°C~52°C
-
Heating
27˚C or less
-5˚C~24˚C
-
u If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.
u If the outdoor temperature goes down to -5°C, heating capacity may decrease as much as 60%~70% of
Maintaining your air conditioner
Internal protections via the unit control system
u This internal protection operates if an internal fault occurs in the air conditioner.
Type
Description
Against cold air
De-ice cycle
Protect compressor
The air conditioner does not start operating immediately to protect the compressor of
the outdoor unit after it has been started.
t If the heat pump is operating in Heat mode, De-ice cycle is actuated to remove frost from an outdoor unit that may
have deposited at low temperatures.
6
Checking the name of the parts
below
Main parts
ENGLISH
Room temperature
sensor
Air intake
(up and down)
spi
Display
Temperature/
Evaporator clean(
Operation indicator
) indicator
Timer indicator
Smart Saver indicator
Remote control receiver
Filter Clean reminder
Power
button
7
Checking the remote controller
t Point the remote controllertowards the remote controller receiver of the indoor unit.
t When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.
Remote controller buttons
Power
Mode
SPi
SPi : Set the SPi function on/off
Set one of the 5 operating modes
(see pages 10~11 for instructions).
Quiet
Smart Saver
Less energy usage makes your space
cool between the temperature range
of 24°C~30°C.
Turbo
Operate in auto fan speed to cool quickly.
Temp + Increase/Decrease the temperature by 1˚C.
Auto Clean
Auto clean function – Dry inside of the indoor
unit to get rid of odor.
On Timer
Set the On Timer on.
Reduce noise generated from an indoor unit
during operation.
Air swing
automatically up and down.
Fan
such as Auto/Low/Medium/High.
The d’light Cool function is not available
for this model.
Set the
mode on.
Filter Reset
Reset the Filter Clean reminder.
To silence the beep sound when pressing
the button.
Use 2 nd function
The Temp/Humi function is not available
for this model.
Set/Cancel
Set/Cancel the timer/
mode.
t When you press [2ndF] button, the
indicator will be displayed on the remote controller and you can change
the functions on the remote controller as listed below.
Auto Clean „ Filter Reset, Temp/Humi „
„
If you select the function under the button while the function of the button is switched by 2ndF button,
the 2ndF function is canceled.
8
Remote controller display
Smart Saver indicator
Use 2 nd function
indicator
On Timer indicator
indicator
Cool
Operation mode
indicator
Low battery indicator
Transmit indicator
Air swing indicator
Fan speed indicator
ENGLISH
Turbo indicator
SPi indicator
Quiet indicator
Auto (Turbo)
Low
Medium
High
d’light Cool indicator
Battery changing time
When the battery is exhausted, ( ) will be displayed in the remote controller display. When the icon appears, change the
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
1. Push the lever as arrow
2. Insert two AAA batteries.
indicates on the rear side of the
Check and match the “+” and “-”
remote controller and pull up.
signs accordingly. Make sure you
have inserted the batteries in
correct position.
3. Close the cover by place it back to its
original position.
You should hear click sound when the cover is
locked properly.
t The signal may not be received well of electronic lighting style
lamps such as inverter
are in the same space.
t If other electrical products operate by the remote controller, call your nearest contact center.
lamps
9
Basic function
Basic operation is an operation mode that can be selected by pressing the Mode button.
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature
detected by the room temperature.
Cool
In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot
season.
t If current outside temperatures are much higher than the selected indoor temperature, it may take time to bring the inner
temperature to the desired coolness.
Dry
Dry mode makes the air feel refreshing in a humid climate.
To activate the Dry mode, remote set temperature must be lower than indoor room temperature.
Fan
Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
t Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is
warming up.
t Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when
outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats
t Only Heating models have this function : AQ09/12/18/24 ✴✴ Series.
10
Press the
button to turn on the air conditioner.
Press the
button to set the operating mode.
ENGLISH
t Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry and Fan
GPress the
button to set the desired fan speed.
Auto
(Auto)
Cool
(Auto),
Dry
(Auto)
Fan
Heat
GPress the
(Low),
(Auto),
(Low),
(Med),
(Low),
(Med),
(High)
(High)
(Med),
(High)
button to adjust the temperature.
Auto
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Cool
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
Dry
You can adjust the desired temperature by 1°C within the range of 18°C~30°C.
Fan
Temperature adjustment is not possible.
Heat
You can adjust the desired temperature by 1°C within the range of 16°C~30°C.
t Air
can be adjusted manually.(see page 12 for instructions.)
t Dry mode is only available in the cooling mode.
11
Adjusting the air flow direction
Press the Air swin g
button on the remote controller.
u
circulate the air.
u
Press the Air swing
direction in a constant position.
position you prefer.
Blade pin lever
t Be extremely careful with your
while adjusting the Horizontal
There is a potential risk of personal injury when the unit is
mishandled.
Using the Turbo function
Press the Turbo button on the remote controller during Cool mode.
u
Turbo indicator appears on the remote controller display and the air conditioner
operates in Turbo function for 30 minutes.
Cancel
Press the Turbo button once again.
t Turbo function is only available in Cool mode.
t If you press the Mode button while the Turbo function is on, it will cancel
the function.
t Temperature/Fan speed cannot be adjusted while using this function.
12
mode
For a comfortable sleep, the air conditioner will operate it Fall asleep w Sound sleep w Wake up from
mode.
1. Press the
ENGLISH
When the air conditioner is on and in cool/heat mode
button on the remote controller.
u
controller display.
2. Press the
button to set the time.
u
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
u
Operating hour can be set from minimum 30 minutes to maximum
12 hours.
u
Default operation hour is set to 8 hours.
3. Press the Set/Cancel button to active it on.
u
Then the air conditioner operates in good’sleep(Cool) mode.
u
If you don’t press Set/Cancel button within 10 seconds after pressing the
the air conditioner will return to previous status.
indicator on the indoor unit.
Check
Cancel
Press the Set/Cancel button once again.
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
mode.
Fan speed will be adjusted automatically according to the
However, If you select
mode while heating operation is on,
you can adjust fan speed.
mode.
However, If you select
Temperature and fan speed changes in
mode while heating operation is on,
mode
t Fall asleep: Eases you into sleep by dropping the temperature.
t Sound sleep: Relaxes your body and raises your temperature slightly.
mode: Allows you to wake up from comfortable intermittent air and it makes you feel
t Wake up from
refreshed.
t Set timer in
mode over 5 hours. You fell disturbed sleep if the
is set too short or long
because the default is set to 8-hour-operation.
t If the
mode is set less than 4 hours, the operation will stop at the same time.
If the
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
t Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for heating.
13
Setting On timer
1. Press the On Timer /Off Timer button.
u
2. Press the On Timer /Off Timer button to set the time.
u
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 24 hours.
u
Operating hour can be set from minimum 30 minutes to maximum
24 hours.
3. Press the Set/Cancel button to active it on.
u
On timer indicator stops blinking and reserved time will be displayed for
3 seconds.
u
If you don’t press Set/Cancel button within 10 seconds after selecting the time the air
indicator on the indoor unit.
Cancel
Press the Set/Cancel button.
Additional options available in On timer mode
You can select from Auto/Cool/Dry/Fan/Heat. (Heat model : AQ !!series)
You can adjust the fan speed in Cool/Fan/Heat mode.
(Heat model : AQ !!series)
You can adjust the temperature in Auto/Cool/Dry/Heat mode.
(Heat model : AQ!!series)
t Only the latest setting timer will be applied between the On
Timer
and
t After setting the timer,the set time will be displayed for 3 second beforre it
diseppears.
t If Timer function is used in Heating mode, Air conditioner work into former
mode.(AS**Series)
14
If the air conditioner is on
1 hour from the moment you have set the timer.
Your air conditioner will turn on after 2 hours.
- The air conditioner will operate On timer after 3 hours
from the moment you have set the timer.
Your air conditioner will remain on for 2 hours and then
t On timer and timer setting time should be
from each other.
t Press the Set/Cancel button on the remote controller while timer combination is on.
Using the Smart Saver function
This function will set the temperature range limit to help you save energy while the air conditioner is operating in Cool mode.
Press the Smart Saver button on the remote controller while the air conditioner is
operating in Cool mode.
u
Smart Saver indicator and air swing indicator appears automatically on the remote
controller display.
u
If the current set temperature is lower than 24°C, it will automatically raise to 24°C.
Cancel
Press the Smart Saver button once again.
t Smart Saver function is only available in Cool mode.
t When Smart Saver function is activated, temperature range will be limited to
24°C~30°C.
t If the desired temperature is lower than 24°C, turn the Smart Saver function
by pressing the Smart Saver button again.
t Temperature/Fan speed can also be adjusted (see page 11 for instructions).
can be adjusted manually (see page 12 for instructions).
t Air
t If you press the Mode button while the Smart Saver function is on, it will cancel
the function.
USING THE SPi FUNCTION < FOR SPi MODEL>
SPi ,Super- Plasma Ion, generates hydrogen(H) and oxygen(O2 ) to remove a polluted substance and
decomposition of such harmful particles. It makes you br eathe better as if you were staying around
waterfalls, ocean surf, rivers and mountains.
1. Pr ess the SPi button on the r emote contr ol.
SPi indicator will appears on the remote control display
and the air conditioner generates SPi .
t T he SPi mode can be selected whether the air
.
t T he SPi mode will be on automatically when you
turn on the air conditioner.
To deactivate SPi mode
1. Pr ess the SPi button on the remote contr ol.
SPi mode you set will be canceled.
15
ENGLISH
-
Using the Auto Clean function
Auto clean function will prevent from growing mold by eliminating the moisture inside of the indoor unit. Your indoor unit
evaporates the moisture inside of the unit. Activate this function to provide you with more clean and healthier air.
Press the Auto Clean button.
u
The Auto clean indicator (C1) on the indoor unit display appears and the Auto cleaning
function runs.
When the air conditioner is turned on,
u
The Auto clean indicator (C1) on the indoor unit display appears and the Auto cleaning
function runs after stopping the air conditioner operation.
୔ Auto Cleaning time can vary, depending on the previously used mode.
Auto(cool), Cool, Dry mode : approximately 30 minutes.
Auto(heat), Heat, Fan mode : approximately 15 minutes.
Cancel
Press the Auto Clean button once again.
t When the air conditioner is turned on, the Auto clean function runs after
stopping the air conditioner operation.
USING THE FILTER RESET
16
Cleaning the air conditioner
t
the wall socket when cleaning the air conditioner.
u
ENGLISH
Cleaning the indoor unit
Wipe the surface of the unit with a slightly wet or dry cloth when
needed.
t Contact the service center when you clean the indoor unit
heat exchanger because it needs to be disassembled.
t Do not clean the display using alkaline detergent.
t Do not use Benzene, Thinner or CloroxTM.
They may damage the surface of the air conditioner and can
Cleaning the outdoor unit heat exchanger
u
When dust accumulates on the heat exchanger, it may decrease cooling
performance. Therefore, clean it regularly.
u
Spray water to clean the dust.
t If it is
to clean the outdoor unit heat exchanger on
your own, contact service center.
Heat exchanger
t Be careful with the sharp edges on the outdoor unit heat
exchanger.
depending on the models)
Opening the panel
Tightly grab top of the front panel and pull it down to open.
Then slightly lift the panel up.
17
Cleaning the air conditioner
and slide it down.
Open the panel and put the A
ter out.
Insert the Ai lter back in its original position
and close the front panel.
Clean the A ter with a vacuum cleaner or soft brush.
If dust is too heavy, rinse it with running water.
Dry the Ai lter in a ventilated area.
t Clean the Air
every 2 weeks or when the
clean reminder lights up. Cleaning term may
depending
on the usage and environmental conditions. In dusty area, clean it once a week.
t When the filter clean reminder is on , please press FILTER RESET button on remote controller.
t
dries in a
(or humid) area, odors may generate. If it occurs, re-clean and dry it in a
t If the Air
well-ventilated area.
18
Maintaining the air conditioner
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain it in best condition.
2. Before using the air conditioner again, dry the inner components of the air conditioner again by running in Fan mode
for 3 to 4 hours. This helps remove odors which may have generated from dampness.
Periodical checks
Refer to the following chart to maintain the air conditioner properly.
Type
Description
(1)
Indoor
unit
Every 2
weeks
Every 3
months
Every 4
months
●
Clean the condensate drain pan (2)
●
Thoroughly clean the heat exchanger (2)
●
Clean the condensate drain pipe (2)
●
●
Replace the remote controller batteries (1)
Clean the heat exchanger on the outside of the unit (2)
Outdoor
unit
Once a year
●
Clean the heat exchanger on the inside of the unit (2)
●
Clean the electric components with jets of air (2)
●
tightened (2)
Clean the fan (2)
●
●
●
Clean the condensate drain pan (2)
●
● : This check mark requires checking the indoor/outdoor unit periodically, following to the description to maintain the
air conditioner properly.
(1) The described operations should be performed more frequently if the area of installation is very dusty.
(2)
installation part in the manual.
19
ENGLISH
1. Dry the air conditioner thoroughly by operating in Fan mode for 3 to 4 hours and disconnect the power plug.
There may be internal damage if moisture is left in components.
Troubleshooting
Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.
PROBLEM
SOLUTION
The air conditioner does
not work at all.
t Check power status and then operate the air conditioner again.
t Plug in or switch on the circuit breaker and then operate the air conditioner again.
t Check if you have set the Timer. Operate the air conditioner again by pressing the
Power button.
The temperature
adjustment is not working.
t Check if you have selected Fan/Turbo mode. In these modes, desired temperature is set to
auto and you cannot adjust the temperature.
Cool/Warm air does
not come out of the air
conditioner.
t Check if the set temperature is higher(during Cool mode)/lower(during Heat mode) than
the current temperature. Press the Temp + or - button on the remote controller to change
the set temperature.
t Check if the Air
is blocked by dirt. If there is a lot of dust on the Air
cooling(heating) performance may decrease. Clean them frequently.
t Check if the outdoor unit is covered or installed near the obstacle. Take the cover and
take the obstacle away.
t If you want to operate the air conditioner in the sunlight, cover the outdoor unit using
curtains or etc.
t Check if the air conditioner is operating in De-ice mode. When the ice formed in winter
or the outdoor temperature is too low, the air conditioner operates in De-ice mode
automatically. In De-ice mode, indoor fan stops and cool air does not come out.
t If the doors or windows are open, it may cause bad cooling (heating) performance.
Close the doors and windows.
t Check if the air conditioner has just been turned on after stopping cooling or heating
operation. In this case, just a fan will run to protect the outdoor unit compressor.
t Check if the pipe length is too long. When the pipe length exceeds maximum allowable
pipe length, cooling (heating) performance may decrease.
working.
t Check if you have selected Auto/Dry/
mode. In these modes, desired
temperature is set to auto and you cannot adjust the temperature.
Fan speed adjustment is
not working.
t Check if you have selected Auto/Dry/Turbo/
is set to Auto and you cannot adjust the fan speed.
Remote controller is not
working.
t Check if your batteries are depleted.
t Make sure nothing is blocking your remote controller sensor.
t Check that there are strong lighting apparatus near the air conditioner. Strong light which
Timer function does not
set.
t Check if you press the Set/Cancel button on the remote controller after you have set the
time.
The indicator is blinking
continuously.
t Press the Power
switch.
If the indicator is still blinking, contact the service center.
Odors permeate in the
room during operation.
t Check if the appliance is running in a smoky area. Ventilate the room or operate the air
conditioner in Fan mode for 1~2 hours. (We do not use smelly components in the air
conditioner.)
20
mode. In these mode, fan speed
SOLUTION
Error is indicated.
t When an indoor unit indicator blinks, contact the nearest service center.
Noise is generated.
t Depending on the status of the air conditioner usage, noise can be heard when refrigerant
Smoke is generated from
the outdoor unit.
t If may not be a but it can be a steam generated by the defrost operation from outdoor
heat exchanger during Heat mode in winter.
Water is dropping from
the outdoor unit piping
connection.
t
21
ENGLISH
PROBLEM
INSTALLATION PARTS
୔ In this manual, you may
Model Names
AS✴✴ E ✴✴
del names written in simpli ed forms as indicated in following table.
Included Models
AS09E✴✴, AS12E ✴✴, AS18E ✴✴, AS19E ✴✴, AS24E ✴✴, AS25E ✴✴
AQ✴✴ E ✴✴
AQ09E✴✴, AQ12E ✴✴, AQ18E ✴✴, AQ24E ✴✴
Remark
Grouping was done by series.
Grouping was done by series.
Safety precautions
Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.
t Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.
t Verify that installation and testing operations are performed by quali ed personnel.
t Verify that the air conditioner is not installed in an easily accessible area.
General information
u
Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order
to be able to use it as reference after installation.
u
For maximum safety, installers should always carefully read the following warnings.
u
Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air
conditioner is sold or transferred.
u
This manual explains how to install an indoor unit with a split system with two SAMSUNG units.
u
The air conditioner is compliant with the requirements of the Low Voltage Directive (72/23/EEC),
the EMC Directive (89/336/EEC) and the Directive on pressurized equipment (97/23/EEC).
u
The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection
of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate
the warranty.
u
The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable
to be installed in areas used for laundry.
The manufacturer shall not be responsible for damages arising from the use of non compliant units.
u
u
SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
u
Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations
u
The unit contains moving parts, which should always be kept out of the reach of children.
u
Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations may
u
Do not place containers with liquids or other objects on the unit.
u
All the materials used for the manufacture and packaging of the air conditioner are recyclable.
u
The packing material and exhaust batteries of the remote controller(optional) must be disposed of in accordance with
current laws.
u
The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air
conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly and
safely.
22
Installing the unit
IMPORTANT:
Always disassemble the electric lines before the refrigerant tubes.
ENGLISH
u
Upon receipt, inspect the product to verify that it has not been damaged during transport.
If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the
installer or the authorized technician has collected the material from the retailer.)
u
After completing the installation, always carry out a functional test and provide the instructions on how to operate the air
conditioner to the user.
u
u
u
The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not suitable
to be installed in areas used for laundry.
u
Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility
from both sides or ability to perform routine maintenance and repairs. The units’components must be accessible and that
can be disassembled in conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair the
won’t be considered in-warranty and charged to end user.
Power supply line, fuse or circuit breaker
u
Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
u
Always verify that a suitable grounding connection is available.
u
u
u
Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the wiring
diagram included in the manual.
u
Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric
Always verify that all connections comply with the standards applicable to the installation of air conditioners.
Choosing the installation location
Indoor unit
u
u
Where cool air can be distributed throughout the room
u
u
u
u
installation diagram
Wall that prevents vibration and is strong enough to hold the product weight
Out of the direct sunlight
1m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
u
u
23
Choosing the installation location
Outdoor Unit
u
u
u
u
u
Where it is not exposed to strong wind
Well ventilated and dustless places
Out of the direct sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong enough to hold the product weight
u
u
u
u
u
u
3m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
Install the unit horizontally
Place where drained water does not become any problem.
Place with no plants (especially climbing plants) and where small animal can not access.
t Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Salty environment such as seaside areas
- Other special atmosphere areas
Observe the clearances and maximum lengths as seen in the picture below when installing the air conditioner.
300mm or more
125mm
or more
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer to
page 37 for further details.
125mm
or more
You can select the direction of
draining
(left or right).
'L' m as maximum pipe length
and 3 m as minimum pipe length
(It will reduce noise and vibration)
600mm
minimum
300mm
minimum
' L ' meters maximum
total pipe length
300mm
minimum
' H ' meters maximum total
pipe height
Model
✴✴ 09 ✴✴
600mm
minimum
✴✴ 12 ✴✴
✴✴ 18 ✴✴
✴✴ 19 ✴✴
✴✴ 24 ✴✴
✴✴ 25 ✴✴
Make at least one round: It will reduce noise and vibration
24
L
15
H
7
15
15
15
20
20
7
7
7
8
8
Space Requirements for Outdoor Unit
When installing 1 outdoor unit
ENGLISH
✻ Figure Description
Top view
Side view
Air intake
Air outlet
Air intake
Air outlet
❮
,
direction.
(Unit : mm)
✻ When the air outlet is towards the
wall
✻ When 3 sides of the outdoor unit are
blocked by the wall
1500 or more
300 or more
When the air outlet is opposite the
wall
300 or more
✻
150 or more
and the air outlet is opposite the
wall
✻ When the walls are blocking front
and the rear side of the outdoor unit
300 or
more
300 or more
1500 or
more
2000 or more
✻ The upper part of the outdoor unit
500 or more
The upper part of the outdoor unit
and the air outlet is towards the wall
1500 or more
✻
600 or more
When installing more than 1 outdoor unit
(Unit : mm)
When the air outlet is towards the wall
300 or more
✻ When 3 sides of the outdoor unit are blocked by the wall
1500 or more
✻
300 or more
600 or more
600 or more
600 or more
25
Choosing the installation location
When the walls are blocking front and the rear side of the outdoor
units
✻
(Unit : mm)
When the upper part of the outdoor unit and
the air outlet is opposite the wall
When front and rear side of the outdoor unit is towards the wall
500 or more
✻
600 or more
1500 or
more
600 or more
500 or more
300 or
more
✻
1500 or
more
600 or
more
3000 or
more
3000 or
more
300 or more
300 or more
200 or
more
t If installation is done in inappropriate space, unit may generate sound and cause bad
t Installation must be done in level and in a place where vibration will not cause any
on the product.
Accessories
The following accessories are supplied with the air conditioner:
t The number of each accessory is indicated in parentheses.
Accessories in the Indoor Unit Case
Installation Plate (1)
✴✴ 09/12 ✴✴
Installation Plate (1)
✴✴18/19/24/25 ✴✴
Remote Control (1)
Remote Control
Holder (1)
Batteries for
Remote Control (2)
Assy-Instruction
Manual
Accessories in the Outdoor Unit Case
Drain Plug (1)
3-wire
Assembly Cable (1)
AS09/12✴✴
Rubber Leg (4)
3-wire
Power Cable (1)
3-wire
Power Cable (1)
AS18/19 ✴✴
AS24/25 ✴✴
5-wire
Assembly Cable (1)
3-wire
Assembly Cable (1)
2-wire
Assembly Cable (1)
AQ09/12 ✴✴
AQ18/24 ✴✴
AQ18/24 ✴✴
t The
nuts are attached to the end of each pipe of an evaporator or a service port.
Use the nuts when connecting the pipes.
t The wire assembly cable is optional. If it is not supplied, use the standard cable.
t The drain plug and rubber leg are only included when the air conditioner is supplied without
the assembly pipe as seen in the picture below.
26
Optional accessories
The following connection accessories are optional. If they are not supplied, you should obtain them before installing the air
conditioner.
Rubber Legs (4)
Insulated Assembly Insulated Assembly Pipe, Insulated Assembly Pipe,
PE T3 Foam Tube
Pipe, Ø9.52mm (1)
Ø12.70mm (1)
Ø15.88mm (1)
Insulation (1)
✴✴ 09 ✴✴
✴✴12/18/19✴✴
✴✴24/25✴✴
Vinyl Tapes (2)
Drain Plug (1)
M4 x 25 Tapped
Screws (6)
Drain Hose,
length 2m (1)
Putty 100g (1)
Pipe Clamps A (3)
Pipe Clamps B (3)
Cement Nails (6)
ENGLISH
Insulated
Assembly Pipe,
Ø6.35mm (1)
t If these accessories are supplied, they will be in the accessory box.
Fixing the installation plate
D
C
(Unit : mm)
Pipe hole
(Ø65mm)
✴✴ 09/12 ✴✴
27
Fix the indoor unit.
If y
x the indoor unit on a wall
(1) Fix the installation plate to the wall giving attention to the weight of the
indoor unit.
If you mount the plate to a concrete wall using plastic
Note
anchors, make sure that gaps between the wall and the plate,
created by projected anchor, is less than 20mm.
B
D
120
(Unit : mm)
68
**18/19/24/25**
Pipe hole
(Ø65mm)
27
2
Determine the position of the pipe and drain hose hole as seen in the picture
and drill the hole with an inner diameter of 65mm so that it slants slightly
downwards.
CAUTION Make sure to drill only one hole after choosing the direction of
the pipe.
A
27
1
Direction of pipe
27
You can select the direction of the drain hose depending on where you want to
install the indoor unit. Therefore before xing the installation plate to a wall or a
window frame, you must determine the position of the 65mm hole through which
the cable, pipe and hose pass to connect the indoor unit to the outdoor unit.
When facing the wall, the pipe and cable can be connected from the:
! Right (A)
! Left (B)
! Underside_right (C)
! Rear_right or left (D)
170
85
Plastic Anchor
<20mm
Wall
If y
x the indoor unit on a window frame
(1) Determine the positions of the wooden uprights to be attached to the
window frame.
(2) Attach the wooden uprights to the window frame giving attention to
the weight of the indoor unit.
(3) Attach the installation plate to the wooden upright using tapping
screws.
t Fix the installation plate without inclining to one side.
t Make sure that a wall can withstand the weight of the product. If you install the product in a place where it is not
strong enough to withstand the product weight, the unit could fall and cause injury.
27
Connecting the assembly cable
AS09**
AS12**
AS18/19 **
AS24/25**
AQ09**
AQ12**
Interconnection cable
Power cable
Model
3G, 1.0mm2
3G, 1.5mm2
3G, 1.0mm2
3G, 1.0mm 2
3G, 1.5mm2
3G, 2.5mm2
(M/C model name : AS19**SGE)
3G, 2.5mm2
AQ18**
3G, 1.0 mm H05VV-F
3G, 1.0 mm H05VV-F
3G, 1.5 mm H05VV-F
AQ24**
3G, 2.5 mm H05VV-F
3G, 2.5mm2
3G, 2.5mm2
5G, 1.0 mm H07RN-F
5G, 1.5 mm H07RN-F
5G, 1.5 mm H07RN-F
3G, 2.5 mm H07RN-F
2 x 0.75 mm H05RN-F
t Connect the power cable to the auxiliary circuit breaker. If every pole fails to connect to
the power supply, it must be incorporated in a wire with a contact opening of ≥3mm.
Connecting the cable
Electrical work
1) For electrical and earth works, comply with the ‘technical standards of electrical installations’ and the
the ‘wiring regulations’ of the Electricity Enterprises Act.
2) Tighten the terminal block screw to under 12kgf.cm.
3) Precautions when connecting terminal blocks of the indoor unit
u Before connecting, make sure the connecting part of the terminal socket is facing upwards.
Upside down
The terminal socket
is damaged.
There is no ring terminal
to cover the wire.
u There must be no space between the terminal and the screw when connected.
The terminal socket
is upside down.
or there is a space between the screw
and the ring terminal.
t For the terminal block wiring, use a wire with a ring terminal socket only.
CAUTION
ng work.
The outdoor unit is powered from the indoor unit through the assembly cable.
If the outdoor unit is more than 5 meters away from the indoor unit, you must
extend the cable. The maximum length of the cable is 15 (**09/12/18/19**) /20 (**24/25**) meters.
1
2
3
4
Extend the assembly cable if necessary.
Open the front grille.
Remove the screw securing the connector cover.
Pass the assembly cable through the rear of the indoor unit and connect the
assembly cable to terminals as seen in the picture.
t Each wire is labeled with the corresponding terminal number.
5
6
Pass the other end of the cable through the 65mm hole in the wall.
7
8
Close the front grille.
Remove the terminal board cover on the side of the outdoor unit.
28
Close the connector cover, tightening the screw carefully.
9
Connect the cables to the terminals as seen in the picture.
t Each wire is labeled with the corresponding terminal number.
AS09/12/18/19**
AQ09/12/18**
ENGLISH
Indoor unit
Indoor unit
Indoor unit
 Ground wire
(Green/Yellow)
Outdoor unit
Outdoor unit
 Ground wire
(Green/Yellow)
Outdoor unit
AS24/25**
AQ24**
Indoor unit
Indoor unit

Ground wire
(Green/Yellow)
GroundWire
(Green/Yellow)
GroundWire
(Green/Yellow)
Outdoor unit

Ground wire
(Green/Yellow)
Outdoor unit
10 Connect the grounding conductor to the grounding terminals.
11 Close the terminal board cover, tightening the screw carefully.
12 Connect the power cable to the indoor unit.
t Connect the wires according to color codes, referring to the wiring diagram.
t The power cable and the interconnection cable should be selected according to the
in page 28.
29
Installing and connecting the assembly pipe of the indoor unit
refrigeration grade pipe only, (Cu DHP type according to ISO1337), degreased and deoxidized, suitable for operating pressures
of at least 4200 kPa and for burst pressure of at least 20700 kPa. Under no circumstances must sanitary type copper pipe be
used.
t The smaller one is for the liquid refrigerant
t The larger one is for the gas refrigerant
need to extend the pipe using the assembly pipe (optional).
The connection procedure for the refrigerant pipe varies
according to the exit position of the pipe when facing the wall:
t Right(A)
t Left(B)
t Underside(C)
t Rear
A
B
C
1. Cut out the appropriate knock-out piece (A, B, C) on the rear of the indoor
unit unless you connect the pipe directly from the rear.
2. Smooth the cut edges.
3. Remove the protection caps of the pipes and connect the assembly pipe
Outer Diameter
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
Torque (kgGtDm)
140~170
250~280
380~420
440~480
torque wrench, applying the following torque:
t If you want to shorten or extend the pipes, refer to page 31~32.
4.
5.
Then pull it out through the appropriate hole.
u
The pipe should not project from the rear of the indoor unit.
u
The bending radius should be 100 mm or more.
6. Pass the pipe through the hole in the wall.
7. For further details on how to connect to the outdoor unit and purge the air, refer to page 34~35.
t The pipe will be insulated and
permanently into position after
refer to page 37 for further details.
t Tighten the
nut with torque wrench according to
method.
t DO NOT WALL UP THE PIPE CONNECTION !
All refrigerant pipe connection must be easy accessible and serviceable.
30
the installation and the gas leak test;
Purging the indoor unit
The indoor unit is supplied with inert gas (nitrogen).
If this one isn’t true, DO NOT INSTALL THE UNIT since leakage could be inside the indoor unit.
u
ENGLISH
1. Unscrew the caps at the end of each pipe.
All inert gas exhausts from the indoor unit.
t To prevent dirt or foreign substances from getting into the pipes during
installation, do NOT remove the caps completely until you are ready to
connect the pipes.
t The remaining air in the Refrigeration cycle, which contains moisture,
may cause malfunction on the compressor.
t Always contact the service center or a professional installation agency
for product installation.
Pipes
Unscrew the caps
Cutting or extending the pipe
A 5-meter pipe is supplied with the air conditioner (optional NOT FOR ITALY).
The length of the pipe can be:
t Extended up to : see table page 24
t Shorten up to: see page 24
If you need a pipe longer than 5 meters:
t You must extend the assembly cable.
t You must add refrigerant to the pipes; otherwise, the indoor unit may freeze.
1.
2. If you want to shorten the pipe, cut it using a pipe cutter, ensuring that the cut edge remains at 90° with the side of the
pipe (see below examples of correct and incorrect cut edges).
Pipe
cutter
Oblique
Rough
Burr
Pipe
3. To prevent a gas leak, remove all burrs at the cut edge of the pipe using a reamer.
t Face the pipe down while removing the burrs to make sure that burrs do not get in to the pipe.
4.
Outer Diameter (D)
Pipe
Depth (A)
Flaring Size (B)
ø6.35 mm
1.3 mm
9.0 mm
ø9.52 mm
1.8 mm
13.0 mm
ø12.70 mm
2.0 mm
16.2 mm
ø15.88 mm
2.2 mm
19.3 mm
Flare
31
Cutting or extending the pipe
5.
Correct
Damaged
Surface
Inclined
Uneven
Thickness
Cracked
6.
applying the following torque:
Outer Diameter
ø6.35 mm
ø9.52 mm
ø12.70 mm
ø15.88 mm
Flare nut
Indoor outlet pipe
Torque (kgGtcm)
140~170
250~280
380~420
440~480
Connecting pipe
t Excessive torque can be cause of gas leakage. In case brazing the pipe, the nitrogen gas must be blown into the
pipe (50 Pa). The joint must be accessible and serviceable.
7. For further details on how to connect to the outdoor unit and purge the air, refer to page 34~35.
t Tighten the
nut with torque wrench according to
method.
Installing and connecting the drain hose of the indoor unit
When installing the drain hose for the indoor unit, check if condensation draining is adequate.
When passing the drain hose through the 65-mm hole drilled in the wall, check the followings:
Wall
Indoor unit
Drain hose
The drain hose must NOT
slant upwards.
5cm
less
The drain hose must not
be bent.
After completing the
installation of the drain
hose, pour water into
the drain pan to check
whether the hose is well
drained.
Ditch
Keep a clearance of at least Do not place the end of the
5cm between the end of the drain hose in a hollow.
drain hose and the ground.
32
The end of the drain hose
must NOT be placed under
water.
Drain hose installation
1. If necessary, connect the 2-meter extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
ENGLISH
3.
tightly with a clamp.
t If you do not use the other drain hose hole, block it with a rubber stopper.
Drain hose hole
Shield
4. Pass the drain hose under the refrigerant pipe, keeping the drain hose
tight.
5. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
t The hose will be
permanently into position after
37 for further details.
Drain hose
Extension drain hose
the installation and the gas leak test; refer to page
t Make sure the installed direction of the drain hose is correct.
Inadequate installation may cause condensate water leakage.
t If the drain hose is routed inside the room, insulate the hose so that dripping condensation does not damage the
t DO NOT WALL UP THE DRAIN HOSE CONNECTION !
Drain hose connection must be easy accessible and serviceable.
Changing direction of the drain hose
Change the direction only when it is necessary.
Screw hole
1. Detach the rubber cap with the plier.
Screw
2. Detach the drain hose by pulling it and turning to the left.
Drain hose
3.
hose and the outlet of the drain pan.
4. Attach the rubber cap with a screwdriver by turning it to the right until it
5. Check for leakage on both side of the drain outlet.
Pour the water in direction of arrow.
Drain pan outlet
Rubber cap
❈ Direction of the drained water
t Make sure the indoor unit is in upright position when you pour water to check for leakage.
33
Installing and connecting the drain hose of the outdoor unit
While heating, ice may accumulate. During the process of defrosting, check if condensation draining is adequate. For adequate
draining, do the following:
1. Insert the drain plug into the drain hole on the underside of the outdoor unit.
t To avoid drain plug from contacting the ground, secure gap between the
ground and the bottom surface of the outdoor unit.
Drain hole
Drain plug
Bottom surface of outdoor unit
2. Connect a drain hose to the drain plug.
Drain hole
Drain plug
Drain hose
3. Ensure that condensation draining is adequate.
t In areas with heavy snow fall, piled snow could block the air intake.
To avoid this incident, install a frame that is higher than estimated snow
fall. In addition, install a snow-proof hood to avoid snow from piling on the
outdoor unit.
Snow-proof hood
Estimated
snow fall Frame
Ground
Purging the connected pipes
The outdoor unit is loade
erant for a 5-meter pipe.
You should purge theair in the indoor unit and in the pipe.
If air remains in the refrigerant pipes, it ects the compressor. It may cause
reduction of cooling capacity and malfunction.
t When installing, make sure there is no leakage. When recovering the refrigerant, ground the compressor
before removing the connection pipe. If the refrigerant pipe is not properly connected and the compressor works
with the service valve open, the pipe inhales the air and it makes the pressure inside of the refrigerant cycle
abnormally high. It may cause explosion and injury.
1. Connect each assembly pipe to the appropriate valve on the outdoor unit and
2.
Outdoor unit
Indoor unit
Gas pipe side
Liquid pipe side
applying the following torque:
t Excessive torque can be cause of gas leakage.
34
Outer Diameter Torque (kgGtDN
ø6.35 mm
140~170
ø9.52 mm
250~280
ø12.70 mm
380~420
ø15.88 mm
440~480
Manifold gauge
3. Connect the charging hose of the low-pressure side of manifold gauge to a
gas service port as seen in the picture.
4. Open the valve of the low pressure side of manifold gauge counterclockwise.
Valve
5. Purge the air in the connected pipes using the vacuum pump for about
15 minutes.
Make sure that pressure gauge shows -0.1MPa(-76cmHg) after about
10 minutes.
This procedure is very important to avoid a gas leak.
u
Close the valve of the low pressure side of manifold gauge clockwise.
ENGLISH
u
Gas service port
<Low pressure>
u
u
Check for 2 minutes if there is any pressure change.
u
Remove the hose of the low pressure side of manifold gauge.
Liquid service port
<High pressure>
Vacuum
Pump
(Ba
prevention)
6. Set a valve cork of liquid and gas service port to the open position.
7. Mount the valve stem nuts and the service port cap to the valve, and tighten
them at the torque of 183kgftcm with a torque wrench.
Valve stem
8. Check for a gas leak paying particular attention to the 3-way valve’s stem nuts
and to the service port cap (Refer to page 36).
Stem nut
A
(Gas)
B
(liquid)
Adding Refrigerant
Add refrigerant charge according to table below:
If you use a pipe longer than 5m,
‘A’g of refrigerant must be added for each extra meter.
If you use a pipe shorter than 5m,
The purge time is normal.
Refer to the Service Manual for further details.
Model
A
09
12
18
19
24
25
10
20
20
20
20
20
t The remaining air in the Refrigeration cycle, which contains moisture, may cause malfunction on the compressor.
t Always contact the service center or a professional installation agency for product installation.
35
Performing the gas leak tests
Make sure to check for gas leaks before completing the installation process (connecting the assembly pipe and hose between
A
C
D
B
To check for gas leaks on the outdoor unit,
Check the valve A and B using a leak detector.
To check for gas leaks on the indoor unit,
Leak test with nitrogen (before opening valves)
In order to detect basic refrigerant leaks, before recreating the vacuum and recirculating.
Leak test (after opening valves)
Before opening valves, discharge all the nitrogen from the system and create vacuum according to page 34~35.
After opening valves, check leaks using a leak detector for refrigerant.
Pump down (before disconnecting the refrigerant connections for unit repair, removal or disposal)
Pump-down is an operation intended to collect all the system refrigerant in the outdoor unit.
This operation must be carried out before disconnecting the refrigerant tubing in order to avoid refrigerant loss to the
atmosphere.
u
u Turn the system on in cooling with fan operating at high velocity.
(Compressor will immediately start, provided 3 minutes have elapsed since the last stop).
u After 2 minutes of operation, shut the suction valve with the same wrench.
u
u Disconnect tubing. After disconnection, protect valves and tubing ends from dust.
u Compressor damage may occur if run at a negative suction pressure.
36
Fixing the indoor unit in place
Perform the following work on the area where gas leak test was done priorly.
After checking for gas leaks in the system, insulate the pipe, hose and cables.
Then place the indoor unit on the installation plate.
Insulation
ENGLISH
1.
part without insulation on the end of the pipes.
Pipes
2. Wind the pipe, assembly cable and drain hose with vinyl tape.
3. Place the bundle (the pipe, assembly cable and drain hose) in the lower part
of the indoor unit carefully so it does not project from the rear of the indoor
unit.
4. Hook the indoor unit to the installation plate and move the unit to the right
and left until it is securely in place.
Installation
plate
Vinyl tape
Connecting
pipes
Connecting wires
Drain hose
t Make sure pipe does not move when you install the indoor unit on
an installation plate.
5. Wrap the rest of the pipe with vinyl tape.
6. Attach the pipe to the wall using clamps (optional).
Fixing the outdoor unit in place
Install the outdoor unit in level on a stable base to avoid the generation of noise and vibration,
especially when installing the unit close to a neighbor.
'Y' mm
'X' mm
appropriate support (wall or ground).
1. Place the outdoor unit as indicated on the top of the unit to let the discharged air out
properly.
2. Fix the outdoor unit in level to an appropriate support using anchor bolts.
3. If the outdoor unit is exposed to strong winds, install shield plates around the outdoor
unit so that the fan can operate correctly.
Rubber leg
Model
** 09/12 **
**18**
**19**
**24 **
**25 **
X
454
538
538
548
660
Y
254
290
290
319
340
t Secure the rubber leg to prevent the generation of noise and vibration.
Outdoor unit installed on the wall by rack
Designed
dual vibration
from outdoor unit to rack.
(not supplied with product)
t Ensure the wall will be able to suspend the weight of rack and
outdoor unit;
t Install the rack close to the column as much as possible;
t Install proper grommet in order to reduce noise and residual
vibration transferred by outdoor unit towards wall.
Soft rubber designed to cut
vibration from rack to wall.
(not supplied with product)
37
Final Check and Trial Operation
To complete the installation, perform the following checks and tests to
ensure that the air conditioner operates correctly.
Check the followings:
t Strength of the installation site
t Tightness of pipe connection to detect gas leak
t Electric wiring connection
t Heat-resistant insulation of the pipe
t Drainage
t Grounding conductor connection
t Correct operation (follow the steps below)
1. Press the Power
u
button and check the following:
The indicator on the indoor unit lights up.
u
2. Press the Mode button to select Cool or Heat mode.
u
u
In Cool mode, use Temp + or - button and set the temperature at 16°C.
In Heat mode, use Temp + or - button and set the temperature at 30°C.
t Approximately 3~5 minutes later, outdoor unit will start to operate and the Cool or Warm air will blow out.
t After 12 minutes of stationary condition check the indoor unit air treatment:
Cooling mode (indoor unit check) ➞ Inlet air temp. - Outlet air temp : From 10°C to 12°C ( indicative delta T)
Heating mode (indoor unit check) ➞ Outlet air temp. - Inlet air temp : From 11°C to 14°C (indicative delta T)
3. Press the Air swing
button and check the following:
u
4. Press the Power
button to stop the operation.
t When you complete the installation successfully, hand over this manual to the user for storage in a handy and safe
place.
Pump down procedure (when removing the product)
1. Turn on the air conditioner and select Cool mode to run the compressor for 3 minutes.
2 . Release the valve caps on High and Low pressure side.
3 . Use L wrench to close the valve on the high pressure side.
4 . Approximately 2 minutes after, close the valve on the low pressure side.
5 . Stop operation of the air conditioner.
6 . Disconnect the pipes.
38
How to connect your extended power cables
Items to prepare
(compressor and insulation tape should be prepared by an installation technician.)
Crimping plier
Connection sleeve (mm)
Insulation tape
Contraction tube (mm)
MH-14
20xØ7.0(HxOD)
Width 18mm
50xØ8.0(LxOD)
ENGLISH
Tools
Spec
Shape
1.
(Unit: mm)
Power cable (provided by us)
of the power cable.
t After peeling
the tube wire, you must insert a contraction tube.
20
20
20
60
120
180
Wire tube power cable
20
2. Insert both sides of core wire of the power cable into the connection sleeve.
Connection sleeve
3.
and compress another two points in the same location.
- The compression dimension should be 8.0.
- After compressing it, pull both sides of the wire to
Comp. dim.
Compress it 4 times
5mm
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
Insulation tape
40mm
Contraction tube
6. After tube contraction work is completed, wrap it with the
Insulation tape
t In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
-
39
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
IRAN
021-8255
SAUDI ARABIA
TURKEY
U.A.E
QATAR
BAHRAIN
OMAN
JORDAN
9200-21230
444 77 11
800-SAMSUNG (726-7864)
4450 4533
8000-4726
800-SAMSUNG (726-7864)
0800-22273
www.samsung.com
www.samservice.com
www.samsung.com
www.samsung.com
www.samsung.com
www.techno-blue.com
www.samsung.com
www.samsung.com
www.samsung.com
EGYPT
MOROCCO
KUWAIT
NIGERIA
SOUTH AFRICA
08000-726786
080 100 2255
183-2255
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Download PDF