SUB-ZERO DESIGN GUIDE
SUB-ZERO DESIGN GUIDE
Contents
Built-In Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRO 48 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . 44
Integrated Refrigeration . . . . . . . . . . . . . . . . . . . . . . 50
Wine Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . 84
Sub-Zero Warranties . . . . . . . . . . . . . . . . . . . . . . . . . 92
MODEL BI-48S
IMPORTANT NOTE: Throughout this guide, dimensions may
vary by ± 1/8" (3).
Features and specifications are subject to change at any time
without notice. Visit subzero.com/specs for the most up-to-date
information.
Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified.
Built-In Refrigeration
3
BUILT-IN
subzero.com/specs
Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside
and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the built-in line nothing short of revolutionary.
36"
36"
36"
(914)
(914)
(914)
84"
84"
(2134)
(2134)
36"
(914)
BI-36RG
BI-36F
30"
36"
36"
(762)
(914)
(914)
BI-30U
BI-30UG
BI-36U
BI-36UG
36"
42"
42"
48"
48"
(914)
(1067)
(1067)
(1219)
(1219)
INTEGRATED
BI-36R
30"
(762)
PRO 48
BUILT-IN MODELS
84"
(2134)
BI-36S
BI-42S
BI-42SID
BI-42SD
BI-48S
BI-48SID
BI-48SD
KEY FEATURES
• NEW! French door model requires less space for door
clearance to accommodate virtually any-size kitchen.
• Handle options coordinate with handles of Wolf
cooking products.
• NEW! Internal dispenser models provide ice and chilled
water inside the refrigerator.
• Dual refrigeration; two compressors preserve food’s
goodness in two sealed compartments.
• Crisper and deli drawers form a lower-temperature
zone for produce and meats.
• Energy efficient; many models are ENERGY STAR®
qualified.
• Flip-up grille provides easy access for quick routine
maintenance.
• Advanced water filtration and air purification systems.
• All models are Star-K certified.
UNDERCOUNTER
• Four distinct design approaches: framed, overlay,
flush inset and stainless steel.
WINE STORAGE
BI-36UFD
BUILT-IN
Built-In Refrigeration
4
Built-In Design Options. A design classic is now even better. Four distinct design approaches provide limitless
UNDERCOUNTER
WINE STORAGE
INTEGRATED
PRO 48
flexibility for creating a beautiful kitchen. Lower-profile hinges enable the built-in units to blend more seamlessly with
surrounding cabinetry.
Framed. Custom cabinetry
Overlay. Custom cabinet
panels slide into the door to
blend into the kitchen design.
Shown with full-length handle
and louvered grille option for
the traditional Sub-Zero look.
overlay panels can be
combined with unique
hardware for design flexibility.
Shown with pro handle option
to complement Wolf ranges.
Built-In Refrigeration
5
BUILT-IN
subzero.com/specs
PRO 48
INTEGRATED
Stainless Steel. For a
option allows for a flush door
and grille. Stainless steel panels
are available as sales accessories. Shown with tubular
handle option to mirror Wolf
built-in ovens.
professional look, this design
requires no customization. To
complement the look of Wolf
ranges, choose the pro handle
option shown here.
WINE STORAGE
Flush Inset. This design
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
6
Built-In Models
All Refrigerator / All Freezer Models
SPECIFICATIONS
OVERALL DIMENSIONS
Interior Capacity
R cu ft (L)
F cu ft (L)
26 3/16" (665)
36" (914)
PRO 48
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R
BI-36RG
BI-36F
23.5 (665)
23.4 (663)
22.7 (643)
OVER-AND-UNDER MODELS
BI-30U
BI-30UG
BI-36U
BI-36UG
BI-36UFD
13.2 (374)
13.1 (371)
16.4 (464)
16.3 (462)
15.7 (445)
4.2 (119)
4.2 (119)
5.3 (150)
5.3 (150)
5.3 (150)
12.4 (351)
16.3 (462)
15.8 (447)
16.0 (453)
19.1 (541)
18.6 (527)
18.8 (532)
8.2 (232)
8.0 (227)
7.9 (224)
7.9 (224)
9.8 (278)
9.6 (272)
9.6 (272)
84"
(2134)
73 3/4"
(1873)
INTEGRATED
SIDE-BY-SIDE MODELS
BI-36S
BI-42S
BI-42SID
BI-42SD
BI-48S
BI-48SID
BI-48SD
Shipping Weight
lbs (kg)
HEIGHT DIMENSIONS ± 1/2" (13)
4" (102)
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R
BI-36RG
BI-36F
420 (191)
430 (195)
406 (184)
WINE STORAGE
23 7/8"
(606)
OVER-AND-UNDER MODELS
BI-30U
BI-30UG
BI-36U
BI-36UG
BI-36UFD
23 7/8" (606)
462 (210)
476 (216)
515 (234)
529 (240)
529 (240)
17"
(432)
37 1/4"
(946)
SIDE-BY-SIDE MODELS
BI-36S
BI-42S
BI-42SID
BI-42SD
BI-48S
BI-48SID
BI-48SD
538 (244)
582 (264)
608 (276)
608 (276)
630 (286)
656 (298)
656 (298)
2 3/8" (60)
UNDERCOUNTER
MODELS BI-36R, BI-36RG AND BI-36F
Shipping weights and overall dimensions are based on
stainless steel models. For flush inset applications, add
1/2" (13) to door clearance dimensions.
Built-In Refrigeration
7
BUILT-IN
subzero.com/specs
Over-and-Under Models
OVERALL DIMENSIONS
26 3/16" (665)
30" (762)
26 3/16" (665)
36" (914)
PRO 48
84"
84"
(2134)
(2134)
50 3/4"
50 3/4"
(1289)
(1289)
23"
(584)
HEIGHT DIMENSIONS ± 1/2" (13)
4" (102)
HEIGHT DIMENSIONS ± 1/2" (13)
23 7/8" (606)
23 7/8"
23 7/8"
(606)
(606)
4" (102)
14 1/2"
17"
(368)
(432)
(600)
311/4"
(796)
23 5/8"
(600)
37 1/4"
(946)
23 7/8" (606)
WINE STORAGE
23 5/8"
INTEGRATED
23"
(584)
2 3/8" (60)
2 3/8" (60)
MODELS BI-30U AND BI-30UG
MODELS BI-36U AND BI-36UG
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
8
Over-and-Under Models
Side-by-Side Models
OVERALL DIMENSIONS
OVERALL DIMENSIONS
26 3/16" (665)
26 3/16" (665)
36" (914)
PRO 48
36" (914)
84"
84"
(2134)
(2134)
50 3/4"
(1289)
73 3/4"
INTEGRATED
(1873)
23"
(584)
WINE STORAGE
HEIGHT DIMENSIONS ± 1/2" (13)
4" (102)
4" (102)
23 7/8"
23 7/8"
(606)
(606)
7 3/4"
81/2"
101/4"
(197)
(216)
(260)
191/2" 23 5/8"
(495)
221/4"
(600)
(565)
2 3/8" (60)
MODEL BI-36UFD
Overall dimensions are based on stainless steel models.
UNDERCOUNTER
HEIGHT DIMENSIONS ± 1/2" (13)
23 7/8" (606)
2 3/8" (60)
MODEL BI-36S
23 7/8" (606)
Built-In Refrigeration
9
BUILT-IN
subzero.com/specs
Side-by-Side Models
OVERALL DIMENSIONS
26 3/16" (665)
42" (1067)
26 3/16" (665)
48" (1219)
PRO 48
84"
84"
(2134)
(2134)
73 3/4"
73 3/4"
(1873)
(1873)
INTEGRATED
HEIGHT DIMENSIONS ± 1/2" (13)
4" (102)
HEIGHT DIMENSIONS ± 1/2" (13)
23 7/8" (606)
4" (102)
23 7/8"
23 7/8"
(606)
(606)
8 3/4"
12 1/2"
9 3/4"
14"
(222)
(318)
(248)
(356)
30"
(668)
(762)
2 3/8" (60)
WINE STORAGE
26 1/4"
23 7/8" (606)
2 3/8" (60)
MODELS BI-42S, BI-42SID AND BI-42SD
MODELS BI-48S, BI-48SID AND BI-48SD
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
10
Built-In Models
IMPORTANT NOTE: If an 83" (2108) grille height is specified,
the opening height must be decreased by 7/8" (22). If an 88"
(2235) grille height is specified, the opening height increases
by 4" (102).
STANDARD INSTALLATION
TOP VIEW
24" (610)
OPENING
DEPTH
WINE STORAGE
INTEGRATED
PRO 48
If two units are installed side by side, refer to pages 30–31 for
dual standard installations.
24" (610)
OPENING DEPTH
83 3/4"
A
(2127)
OPENING
HEIGHT
OPENING WIDTH
SIDE VIEW
UNDERCOUNTER
Opening Width
FRONT VIEW
A
BI-36R, BI-36RG and BI-36F
35 1/2" (902)
BI-30U and BI-30UG
29 1/2" (749)
BI-36U, BI-36UG and BI-36UFD
35 1/2" (902)
BI-36S
35 1/2" (902)
BI-42S, BI-42SID and BI-42SD
411/2" (1054)
BI-48S, BI-48SID and BI-48SD
47 1/2" (1206)
Built-In Refrigeration
11
BUILT-IN
subzero.com/specs
Planning Information
PLUMBING REQUIREMENTS
For all built-in models, the electrical supply should be
located within the shaded area shown in the illustration.
Follow the National Electrical Code and local codes and
ordinances when installing the receptacle. A separate
circuit servicing only this appliance is required. A ground
fault circuit interrupter (GFCI) is not recommended and
may cause interruption of operation.
All built-in models with an automatic ice maker feature a
water filtration system. The water supply line should be
located within the shaded area shown in the illustrations.
The water supply line should be connected to the house
supply with an easily accessible shut-off valve between
the supply and the unit. Do not use self-piercing valves.
A saddle valve kit is available through your authorized
Sub-Zero dealer. The water line must not interfere with
installation of the anti-tip brackets.
PRO 48
ELECTRICAL REQUIREMENTS
Electrical Requirements
Power Supply
115 V AC, 60 Hz
Circuit Breaker
15 amp
Receptacle
3-prong grounding-type
7"
(178)
E
6"
Plumbing Requirements
1/4"
Water Supply Line
(152)
OD copper, braided stainless steel
or PEX tubing
Water Pressure
75 1/2"
INTEGRATED
FRONT VIEW
IMPORTANT NOTE: A reverse osmosis system can be
used provided there is constant water pressure of 35 psi
(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times.
In this application, the water filtration system must be set
to bypass mode. This is achieved by removing the water
filter cartridge. Refer to the built-in installation guide
packed with the unit for detailed instructions. A copper
line is not recommended for this application.
35–120 psi (2.4–8.3 bar)
Excess Water Line for Connection
36" (914)
(1918)
FROM
FLOOR
BACK WALL
18" (457)
1/2"
(13)
6"
(152)
18" (457)
WINE STORAGE
Location of electrical supply.
6"
(152)
3" (76)
FLOOR
FRONT VIEW
Location of water supply—
bottom.
UNDERCOUNTER
Location of water supply—
rear.
TOP VIEW
BUILT-IN
Built-In Refrigeration
12
Framed Application
IMPORTANT NOTE: The framed application is not a
separate model. This is an overlay unit in a framed application.
PRO 48
The framed panel design option is available for all built-in
overlay models. You must specify panels, full-length
handles and a framed grille insert to achieve the traditional
framed look. For exact door panel dimensions refer to
framed panel specifications on the following pages. Also
refer to the full-scale templates at the end of this section
for additional panel and handle considerations.
INTEGRATED
Optional extended full-length handles that provide additional finger clearance for raised panels are available
through your authorized Sub-Zero dealer.
WINE STORAGE
Custom cabinetry panels slide into the door to blend into the
kitchen design. Shown with full-length handle and louvered
grille option for the traditional Sub-Zero look.
Framed Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Framed Panels
MIN PANEL THICKNESS
All Framed Panels
UNDERCOUNTER
75 lbs (34 kg)
50 lbs (23 kg)
1/4"
(6)
Built-In Refrigeration
13
BUILT-IN
subzero.com/specs
Framed Panels
If the thickness of the custom panels is less than 1/4" (6),
they must be backed up with a sheet of shim material to
build the total thickness to 1/4" (6). If the panel is thicker
than 1/4" (6), a routed edge must be provided around the
panel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE: Do not cover a glass door with a solid
panel. Also, the edges of the window cut-out will need to
be finished, as they will be exposed.
DOOR
TRIM
REVEAL
1/4" (6) min
ROUT TO
1/4" (6)
MAIN FRAME
DOOR
PANEL
Panels 1/4" (6) thick or less.
Panels thicker than 1/4" (6).
INTEGRATED
IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
1/4" (6)
MAIN FRAME
PRO 48
IMPORTANT NOTE: For framed design applications,
routing, recessing or optional extended handles may be
required on raised panels for finger clearance under the
handle. Refer to the full-scale templates at the end of this
section.
TRIM
REVEAL
1/4" (6) min
WINE STORAGE
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
14
Framed Panels
A
A
H
A
H
A
PRO 48
H
A
A
H
H
W
A
H
W
H
H
B
W
BI-36R / BI-36F
W
W
BI-36RG
BI-30U / BI-36U
INTEGRATED
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR/FREEZER
Door Panel
BI-36RG
Stiles / Rails
W
BI-30UG / BI-36UG
W
BI-36UFD
Models BI-36U and BI-36UG
W
H
35 3/4" (908)
69 9/16" (1767)
A
B
5 3/16" (132)
10 5/16" (262)
REFRIGERATOR
Door Panel
FREEZER
Drawer Panel
W
H
35 3/4" (908)
49 15/16" (1268)
W
H
35 3/4" (908)
18 11/16" (475)
BI-36UG
A
5 3/16" (132)
Stiles / Rails
Models BI-30U and BI-30UG
REFRIGERATOR
Door Panel
FREEZER
Drawer Panel
UNDERCOUNTER
WINE STORAGE
BI-30UG
Stiles / Rails
W
H
29 3/4" (756)
49 15/16" (1268)
W
H
29 3/4" (756)
18 11/16" (475)
A
5 3/16" (132)
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Door Panels
FREEZER
Drawer Panel
W
H
17 5/8" (448)
49 15/16" (1268)
W
H
35 3/4" (908)
18 11/16" (475)
Built-In Refrigeration
15
BUILT-IN
subzero.com/specs
Framed Panels
H
H
PRO 48
A
B
W
W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
W
W
BI-42SD / BI-48SD
Model BI-36S
Models BI-48S, BI-48SID and BI-48SD
Door Panel
W
H
19 13/16" (503)
69 9/16" (1767)
FREEZER
Door Panel
W
H
15 7/16" (392)
69 9/16" (1767)
REFRIGERATOR
Door Panel
FREEZER
Door Panel
BI-48SD
Dispenser Cut-Out
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Door Panel
FREEZER
Door Panel
BI-42SD
Cut-Out Location
H
24 13/16" (630)
69 9/16" (1767)
W
H
16 7/16" (418)
69 9/16" (1767)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
1 7/8" (48)
28 3/4" (730)
Cut-Out Location
H
69 9/16" (1767)
W
H
18 3/4" (476)
69 9/16" (1767)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
1 7/8" (48)
28 3/4" (730)
For models BI-42SD and BI-48SD, panel thickness in the
dispenser area can range from 1/4" (6) to a maximum of
1 1/8" (29). If the panel is thicker, you must rout out a minimum
1/4" (6) flat landing area to accommodate the glasswell bezel.
WINE STORAGE
Dispenser Cut-Out
W
W
28 1/2" (724)
INTEGRATED
REFRIGERATOR
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
16
Framed Application
OPTIONAL GRILLE PANEL
PRO 48
A panel grille, providing an 84" (2134) finished height, is
standard on overlay models. Optional panel grilles are
available for 83" (2108) and 88" (2235) finished heights.
Grille panel dimensions listed are for a standard 84" (2134)
finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88"
(2235) finished height, add 4" (102) to height dimensions.
INTEGRATED
Optional Grille Panel
WINE STORAGE
H
30" (762) Models
36" (914) Models
35 3/4" (908)
8 15/16" (227)
42" (1067) Models
41 3/4" (1060)
8 15/16" (227)
48" (1219) Models
47 3/4"
8 15/16" (227)
(756)
(1213)
8 15/16"
(227)
Grille Panel Requirements
MAX WEIGHT
Grille Panel
13 lbs (6 kg)
MIN PANEL THICKNESS
Grille Panel
UNDERCOUNTER
W
29 3/4"
1/4"
(6)
Optional grille panel.
Built-In Refrigeration
17
BUILT-IN
subzero.com/specs
Framed Application
PARTIAL FRAMED OPTION
If you choose not to use custom panels above and below
the glasswell for dispenser model BI-42SD or BI-48SD,
a stainless steel insert panel is available as a sales accessory. This accessory kit includes partial framed molding
and stainless steel panel to provide a spill-resistant finish
above and below the glasswell on the refrigerator door
only. The partial framed accessory kit is available through
your authorized Sub-Zero dealer. Refer to panel dimensions for the partial framed option below.
H
PRO 48
W
Partial framed kit.
Optional Partial Framed Panels
BI-42SD
Refrigerator Panel
Freezer Panel
BI-48SD
H
69 9/16" (1767)
69 9/16" (1767)
W
H
18 3/4" (476)
18 3/4" (476)
69 9/16" (1767)
69 9/16" (1767)
BI-42SD / BI-48SD
Partial framed option.
INTEGRATED
Refrigerator Panel
Freezer Panel
W
15 1/16" (383)
16 7/16" (418)
W
WINE STORAGE
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
18
Overlay Panels
PRO 48
If you and your client have ordered an overlay model, you
will be adding panels and handles to give the unit a more
custom look. The overlay panel design option is available
for all built-in overlay models. For exact door panel dimensions, refer to overlay panel specifications on the following
pages.
IMPORTANT NOTE: Overlay models can be used in an
overlay or a flush inset application. Be aware that the
application specified will affect panel sizes, rough opening
dimensions and installation.
INTEGRATED
The overlay design allows decorative panels to cover the
door trim for a more seamless appearance that blends
with the design of the room. The most common way to
achieve this look is to work with three panels—the decorative overlay panel, which is typically 3/4" (19), a .10" (3)
spacer panel and a 1/4" (6) backer panel. Depending on
your cabinet manufacturer, this could also be one panel
routed for different dimensions.
Regardless of the physical construction of the panels
(three-panel assembly or routed panel), you will need to
follow the overlay panel specifications on the following
pages for exact sizing and panel placement to ensure a
proper fit.
WINE STORAGE
Custom cabinet overlay panels can be combined with unique
hardware for design flexibility. Shown with pro handle option
to complement Wolf ranges and rangetops.
Overlay Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Overlay Models
Grille Panel
75 lbs (34 kg)
50 lbs (23 kg)
13 lbs (6 kg)
MIN PANEL THICKNESS
UNDERCOUNTER
All Overlay Panels
5/8"
(16)
Built-In Refrigeration
19
BUILT-IN
subzero.com/specs
Overlay Panels
The illustrations provide a cross section view of the threepanel assembly, showing placement of the trim and a rear
view of the three-panel assembly with critical dimensions,
standard for all built-in models.
Overlay grille panels for the panel grille match the design
of the overlay door panels. Dimensions for the grille panel
are listed in the overlay panel specifications on the following pages.
IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30–31 for dual standard
installations. Be aware that rough opening dimensions are
different for this application.
OVERLAY PANEL
BACKER PANEL
BACKER
PANEL
TRIM
5/16" (8) min
1/8"
(3)
3/ 4 "
(19)
typical
.10" (3) 1/4" (6)
Panel assembly cross section. Panel assembly rear view.
INTEGRATED
IMPORTANT NOTE: On glass door models, the edges of
the overlay, spacer and backer panels of the window
cut-out will need to be finished, as they will be exposed.
SPACER
PANEL
PRO 48
A Sub-Zero custom panel mounting kit eliminates the
need for a backer and spacer panel and is available
through your authorized Sub-Zero dealer. The kit consists
of mounting cleats, screws and gages used to properly
position the cleats. The kit is available for all built-in
models except glass door models. Dual installations
require two mounting kits.
OVERLAY
PANEL
SPACER PANEL
Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.
WINE STORAGE
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
20
Overlay Panels
H
H
H
A
A
H
H
H
A
A
H
H
A
A
PRO 48
H
H
W
A
H
W
H
H
B
W
BI-36R / BI-36F
W
W
BI-36RG
BI-30U / BI-36U
INTEGRATED
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-36RG
Stiles / Rails
WINE STORAGE
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-30UG
UNDERCOUNTER
Stiles / Rails
BI-30UG / BI-36UG
W
BI-36UFD
Models BI-36U and BI-36UG
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
A
B
5 1/4" (133)
10 3/8" (264)
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
19" (483)
18 1/16" (459)
18 11/16" (475)
Models BI-30U and BI-30UG
REFRIGERATOR
W
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
19" (483)
18 1/16" (459)
18 11/16" (475)
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
BI-36UG
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
A
5 1/4" (133)
A
5 1/4" (133)
Stiles / Rails
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Overlay Panels
Spacer Panels
Backer Panels
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
H
17 7/8" (454)
17" (432)
17 5/8" (448)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
19" (483)
18 1/16" (459)
18 11/16" (475)
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
Built-In Refrigeration
21
BUILT-IN
subzero.com/specs
Overlay Panels
H
H
H
H
PRO 48
A
B
W
W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
W
W
BI-42SD / BI-48SD
Model BI-36S
Models BI-48S, BI-48SID and BI-48SD
Overlay Panel
Spacer Panel
Backer Panel
W
H
20 1/16" (510)
19 3/16" (487)
19 13/16" (503)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
W
H
15 11/16" (398)
14 13/16" (376)
15 7/16" (392)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
H
36" (914)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-48SD
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
Dispenser Cut-Out
Cut-Out Location
H
25 1/16" (637)
24 3/16" (614)
24 13/16" (630)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
16 11/16" (424)
15 13/16" (402)
16 7/16" (418)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
42" (1067)
41 1/8" (1045)
41 3/4" (1060)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
2" (51)
28 13/16" (732)
Cut-Out Location
W
H
19" (483)
18 1/8" (460)
18 3/4" (476)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
48" (1219)
47 1/8" (1197)
47 3/4" (1213)
9 1/4" (235)*
8 5/16" (211)
8 15/16" (227)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
2" (51)
28 13/16" (732)
*Panel height may be increased by 7/16" (11) to hide upper
main frame. For more information, refer to the built-in panel
configurator at subzero.com/trade/panels.
Grille panel dimensions listed are for a standard 84" (2134)
finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235)
finished height, add 4" (102) to height dimensions. An 83"
(2108) or 88" (2235) panel grille must be ordered to accept an
83" (2108) or 88" (2235) custom panel.
UNDERCOUNTER
BI-42SD
W
H
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
WINE STORAGE
Dispenser Cut-Out
W
28 3/4" (730)
27 7/8" (708)
28 1/2" (724)
INTEGRATED
REFRIGERATOR
BUILT-IN
Built-In Refrigeration
22
Flush Inset Application
It is necessary to consider the following points when
planning for a flush inset application:
• The flush inset depth is 2 3/16" (56) deeper than the
standard opening.
PRO 48
• The flush inset width is 2 1/2" (64) wider than the
standard opening.
• The flush inset height is 1/4" (6) higher than the
standard opening.
• Panel widths increase to achieve the flush inset look.
• You must allow a 1/2" (13) reveal around the perimeter
of the unit and grille to allow for proper door clearance
and airflow.
INTEGRATED
IMPORTANT NOTE: The flush inset application is not a
separate model. This is an overlay unit in a flush installation. The same model is used in an overlay or flush inset
application.
Rough opening dimensions for the flush inset application
assume the use of a 3/4" (19) decorative panel. The illustrations below show the difference between standard and
flush inset installations.
This design option allows for a flush door and grille. Stainless
steel panels are available as sales accessories. Shown with
tubular handle option to mirror Wolf built-in ovens.
WINE STORAGE
STANDARD INSTALLATION
24" (610)
OPENING
DEPTH
T
26 3/16"
24" (610)
OPENING
DEPTH
TOP VIEW
Standard installation.
UNDERCOUNTER
FLUSH INSET INSTALLATION
WITH 3/4" (19) PANEL
(665)
FLUSH
INSET
DEPTH
TOP VIEW
2 3/16"
11/4"
(56)
(32)
Flush inset installation.
Built-In Refrigeration
23
BUILT-IN
subzero.com/specs
Built-In Models
3
FLUSH INSET INSTALLATION
TOP VIEW
26 3/16"
11/4"
(32)
UNIT WITH
3/4" (19) PANEL
CLEAT
26 3/16" 24" (610)
TOP VIEW
OPENING
(665)
DEPTH
FLUSH
INSET TO CLEAT
DEPTH
CLEAT
3" (76)
PRO 48
24" (610)
DEPTH
(665)
FLUSH TO CLEAT
INSET
DEPTH
typical
DETAIL A
2 3/16" (56)
2 3/16"
1/4"
(6)
(56)
11/4"
(32)
CLEAT
24" (610)
DEPTH TO CLEAT
Detail A
2 3/16"
(56)
26 3/16" (665)
3" typical
(76)
CLEAT
SHADED
AREA
MUST BE
FINISHED
4" (102)
83 3/4"
(2127)
HEIGHT
TO CLEAT
A
11/4"
11/4"
WIDTH TO CLEAT
(32)
(32)
84"
B
(2134)
FLUSH
INSET
HEIGHT
FLUSH INSET WIDTH
24" (610)
OPENING
DEPTH TO
CLEAT
INTEGRATED
FLUSH INSET DEPTH
2 3/16" (56)
11/4"
(32)
Detail B
SIDE VIEW
WINE STORAGE
DETAIL B
FRONT VIEW
Flush Inset Opening Widths
B
BI-36R, BI-36RG and BI-36F
35 1/2" (902)
38" (965)
BI-30U and BI-30UG
29 1/2" (749)
32" (813)
BI-36U, BI-36UG and BI-36UFD
35 1/2" (902)
38" (965)
BI-36S
35 1/2" (902)
38" (965)
BI-42S, BI-42SID and BI-42SD
411/2"
(1054)
44" (1118)
BI-48S, BI-48SID and BI-48SD
47 1/2" (1206)
50" (1270)
Dimensions assume a 3/4" (19) panel thickness.
IMPORTANT NOTE: If an 83" (2108) grille height is specified,
the height to cleat and flush inset height must be decreased
by 7/8" (22). If an 88" (2235) grille height is specified, the height
to cleat and flush inset height increases by 4" (102).
If two units are installed side by side, refer to pages 32–36 for
dual flush inset installations.
UNDERCOUNTER
A
BUILT-IN
Built-In Refrigeration
24
Flush Inset Panels
INTEGRATED
PRO 48
The flush inset application allows decorative panels on the
front of the unit to be flush with surrounding cabinetry and
is available for all built-in overlay models. For exact panel
dimensions, refer to flush inset panel specifications on the
following pages.
The flush inset design allows decorative panels to cover
the door trim for a seamless appearance that blends with
the design of the room. The most common way to achieve
this look is to work with three panels—the decorative flush
inset panel, which is typically 3/4" (19), a .10" (3) spacer
panel and a 1/4" (6) backer panel. Depending on your
cabinet manufacturer, this could also be one panel routed
for different dimensions.
A Sub-Zero custom panel mounting kit eliminates the
need for a backer and spacer panel and is available
through your authorized Sub-Zero dealer. The kit consists
of mounting cleats, screws and gages used to properly
position the cleats. The kit is available for all built-in
models except glass door models. Dual installations
require two mounting kits.
WINE STORAGE
Regardless of the physical construction of the panels
(three-panel assembly or routed panel), you will need to
follow the flush inset panel specifications on the following
pages for exact sizing and panel placement to ensure a
proper fit.
The illustration below provides a rear view of the threepanel assembly with critical dimensions, standard for all
built-in models.
IMPORTANT NOTE: The inside edges of the rough opening
as well as the sides and a portion of the back side of the
decorative panels will need to be finished, as they will be
exposed when the doors are open.
IMPORTANT NOTE: On glass door models, the edges of
the overlay, spacer and backer panels of the window
cut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: For flush inset panels thicker than
3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale
templates at the end of this section.
IMPORTANT NOTE: When installing two units side by side
in a flush inset application, refer to pages 32–36 for dual
flush inset installations. Be aware that rough opening
dimensions, panel sizes and offsets are different for this
application.
FLUSH INSET
PANEL
SPACER
PANEL
BACKER
PANEL
Do not exceed flush inset panel dimensions, as this
could cause damage to panels and the Sub-Zero unit.
3 /4"
(19)
typical
.10" (3) 1/4" (6)
Flush Inset Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Flush Inset Models
Grille Panel
75 lbs (34 kg)
50 lbs (23 kg)
13 lbs (6 kg)
MIN PANEL THICKNESS
UNDERCOUNTER
All Flush Inset Panels
5/8"
(16)
Three-panel assembly.
Built-In Refrigeration
25
BUILT-IN
subzero.com/specs
C
C
5
Flush Inset Panels
PANEL OFFSETS
T
D
Illustrations A–F provide panel offsets and reveals for all
built-in models in a flush inset application. Refer to the
chart below for reference to the illustrations relating to
your specific model.
TOP VIEW
TOP VIEW
DOOR / DRAWER / GRILLE
DOOR
BACKER
SPACER
DOOR
CABINETRY
PRO 48
FLUSH INSET PANEL
Panel Offsets
Illus.
5/16" (8)
ALL REFRIGERATOR / ALL FREEZER
Door / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
A
C
D
F
1/2"
(13)
5/16" (8)
1/8" (3)
5/8"
(16)
1/4" (6)
REVEAL
Illus. A
Illus. B
OVER-AND-UNDER
A
C
D
E
F
CABINETRY
1/2" (13)
GRILLE
5/16"
(8) 5/32"
(4)
GRILLE
1/8"
5/16" (3)
(8)
INTEGRATED
Door / Drawer / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom / Drawer Top
Drawer Bottom
1/2" (13)
SIDE-BY-SIDE
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
A
B
C
D
F
DOOR
3/32"
5/16" (2)
(8)
SIDE VIEW
Illus. C
SIDE VIEW
S
Illus. D
S
DOOR /
DRAWER
WINE STORAGE
5/16"
(8) 3/32"
(2)
DOOR
5/8" (16)
DRAWER
5/16"
(8)
5/32"
5/16" (4)
(8)
SIDE VIEW
Illus. E
SIDE VIEW
3/32"
(2)
SIDE VIEW
Illus. F
UNDERCOUNTER
5
BUILT-IN
Built-In Refrigeration
26
Flush Inset Panels
H
H
H
A
A
H
H
H
B
A
H
H
A
A
PRO 48
H
H
W
B
H
W
H
H
B
W
BI-36R / BI-36F
W
W
BI-36RG
BI-30U / BI-36U
INTEGRATED
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36RG
Stiles / Rails
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
A
B
5 3/4" (146)
10 3/8" (264)
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
19" (483)
18 1/16" (459)
18 11/16" (475)
WINE STORAGE
Models BI-30U and BI-30UG
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-30UG
UNDERCOUNTER
Stiles / Rails
BI-30UG / BI-36UG
W
BI-36UFD
Models BI-36U and BI-36UG
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER
W
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36UG
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
A
B
5 3/4" (146)
5 1/4" (133)
Stiles / Rails
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
19" (483)
18 1/16" (459)
18 11/16" (475)
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
A
B
5 3/4" (146)
5 1/4" (133)
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Flush Inset Panels
Spacer Panels
Backer Panels
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
18 3/8" (467)
17" (432)
17 5/8" (448)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
19" (483)
18 1/16" (459)
18 11/16" (475)
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Built-In Refrigeration
27
BUILT-IN
subzero.com/specs
Flush Inset Panels
H
H
H
H
PRO 48
A
B
W
W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
W
W
BI-42SD / BI-48SD
Model BI-36S
Models BI-48S, BI-48SID and BI-48SD
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
20 9/16" (522)
19 3/16" (487)
19 13/16" (503)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
16 3/16" (411)
14 13/16" (376)
15 7/16" (392)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
37" (940)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
DISPENSER (BI-48SD)
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
Dispenser Cut-Out
Cut-Out Location
H
25 9/16" (649)
24 3/16" (614)
24 13/16" (630)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
17 3/16" (437)
15 13/16" (402)
16 7/16" (418)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
43" (1092)
41 1/8" (1045)
41 3/4" (1060)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
2" (51)
28 13/16" (732)
Cut-Out Location
W
H
19 1/2" (495)
18 1/8" (460)
18 3/4" (476)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
49" (1245)
47 1/8" (1197)
47 3/4" (1213)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
5 7/8" (149)
12 7/16" (316)
A
B
2" (51)
28 13/16" (732)
Grille panel dimensions listed are for a standard 84" (2134)
finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235)
finished height, add 4" (102) to height dimensions. An 83"
(2108) or 88" (2235) panel grille must be ordered to accept an
83" (2108) or 88" (2235) custom panel.
UNDERCOUNTER
DISPENSER (BI-42SD)
W
H
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
WINE STORAGE
Cut-Out
W
29 1/4" (743)
27 7/8" (708)
28 1/2" (724)
INTEGRATED
REFRIGERATOR
BUILT-IN
Built-In Refrigeration
28
Ice and Water Dispenser
MODELS BI-42SD AND BI-48SD
INTEGRATED
PRO 48
For models BI-42SD or BI-48SD, the refrigerator door
panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in
this area can range from 1/4" (6) to a maximum of 11/8" (29).
IMPORTANT NOTE: Regardless of the thickness of the
panel for model BI-42SD or BI-48SD, you must plan for a
flat landing area for the decorative bezel surrounding the
glasswell area. The illustration to the right provides exact
bezel dimensions. Refer to the appropriate panel specifications page for exact cut-out location. This landing area
can be accomplished in a number of different ways. These
photos show two options.
For overlay and flush inset models, mounting placement of
the refrigerator door handle must assure proper access to
the glasswell and adequate clearance under the handle.
The handle placement illustration shows the relation of the
refrigerator door handle to the glasswell bezel on stainless
steel models.
5/8"
3/32"
(16)
(2)
6 5/16" (160)
One option (flush) is to rout the panel so the bezel will be
flush with stiles and rails. You must rout a space to
accommodate the height and width of the bezel. The
width of the stile immediately to the left of the bezel must
be 13/4" (44). Do not cut the entire stile to this dimension.
The other option (proud) shows a boxed out landing area
for the bezel using stiles and rails to create this space. In
this application, the bezel will sit proud of the stiles and
rails. The total thickness of the panels at this level must
not exceed 11/8" (29).
1/8" (3)
RADIUS
WINE STORAGE
UNDERCOUNTER
Proud option.
GLASSWELL
2"
(51)
12 7/8"
(327)
Dispenser dimensions.
Flush option.
1"
(25)
Handle placement.
HANDLE
Built-In Refrigeration
29
BUILT-IN
subzero.com/specs
Side Panels
IMPORTANT NOTE: The use of side panels may change
the width of your rough opening.
IMPORTANT NOTE: If you have a model BI-30U, BI-30UG,
BI-36U, BI-36UG or BI-36UFD, extra routing will be necessary to prevent the panel from hitting the refrigerator lower
hinge plate.
When installing a built-in unit with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are also available through your authorized
Sub-Zero dealer.
PRO 48
Side panels can be used with every design application.
When planning for side panels with the installation of a
built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact
panel you are using with your unit, the height of the panel
may vary.
The side panel will need to be a minimum of 24" (610) deep
and 1/2" (13) thick. Refer to the illustrations below for side
panel dimensions. Routing will be necessary so that the
side panel fits flush against the side of the unit.
24" (610)
1" (25)
1 7/8" (48)
INTEGRATED
FRONT
OF SIDE
PANEL
1/8" (3)
ROUT TO 1/8" (3)
1/2" (13)
1 7/8"(48)
84"
1" (25)
MAIN
FRAME
SIDE PANEL
ROUTING
(2134)
ROUT TO
3/16" (5)
(OVER-AND-UNDER
MODELS)
5 3/4"
(146)
WINE STORAGE
Routing detail.
4 1/4" (108)
20 1/2"
(521)
4" (102)
OPTIONAL
TOE KICK
CUT-OUT
2 5/8"
(67)
Side panel dimensions.
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
30
Dual Installation
STANDARD APPLICATION
INTEGRATED
PRO 48
Two overlay or stainless steel units may be placed side by
side in a dual installation. Some standard applications will
require a dual installation kit, available through your
authorized Sub-Zero dealer. If you are installing two units
side by side in a flush inset application, refer to page 32.
A custom filler strip can be used between two units in a
framed, overlay or stainless steel design application. A
custom filler strip is required when installing two French
door or side-by-side models. It is recommended that the
filler strip be at least 2" (51) wide to prevent condensation
between the units. Be sure to add the filler strip width to
your rough opening width. Refer to the full-scale template
on page 42.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip.
Dual installation—standard application.
IMPORTANT NOTE: For the application shown in illustration A, a dual installation accessory kit is required. Refer to
page 36 for information on dual installation kits.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Models
Dual Wide Grille Panel
75 lbs (34 kg)
50 lbs (23 kg)
26 lbs (12 kg)
WITHOUT FILLER STRIP
WINE STORAGE
MIN PANEL THICKNESS
Framed Panels
Overlay and Flush Inset Panels
FILLER STRIP REQUIRED
1/4" (6)
5/8" (16)
Illus. A
W
UNDERCOUNTER
FILLER STRIP REQUIRED
Illus. B
Illus. C
Built-In Refrigeration
31
BUILT-IN
subzero.com/specs
Dual Installation
STANDARD INSTALLATION
TOP VIEW
24" (610)
OPENING
DEPTH
PRO 48
83 3/4"
A
(2127)
OPENING
HEIGHT
OPENING WIDTH
Opening Widths
WINE STORAGE
SIDE VIEW
INTEGRATED
24" (610)
OPENING DEPTH
FRONT VIEW
A
Two 30" (762) Models
59 3/4" (1518)
30" (762) and 36" (914) Models
65 3/4" (1670)
Two 36" (914) Models
71 3/4" (1822)
IMPORTANT NOTE: A dual installation kit will be required
for this installation.
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
32
Dual Installation
FLUSH INSET APPLICATION
INTEGRATED
PRO 48
Installing two built-in models side by side in a flush inset
application will require adjustments to the dimensions of
your finished rough opening, panel sizes and panel offsets.
It will also require a dual installation kit, available through
your authorized Sub-Zero dealer.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip. A custom filler strip is
required when installing two French door or side-by-side
models. Refer to the full-scale template on page 43. Illustration A is the only application that will accommodate the
dual wide grille.
IMPORTANT NOTE: The application shown in illustration A
can only be achieved by installing dual flush inset panels. F
Failure to install dual flush inset panels will cause the
handle side of the panels to collide when closing. In this
application a dual installation accessory kit is also
required.
Dual installation—flush inset application.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Models
Dual Wide Grille Panel
75 lbs (34 kg)
50 lbs (23 kg)
26 lbs (12 kg)
Dual flush inset panels and dual installation kits are available through your authorized Sub-Zero dealer. Refer to
pages 34–35 for dual flush inset panel specifications and
page 36 for information on dual installation kits.
MIN PANEL THICKNESS
WINE STORAGE
Flush Inset Panels
5/8"
(16)
WITHOUT FILLER STRIP
UNDERCOUNTER
Illus. A
FILLER STRIP REQUIRED
Illus. B
FILLER STRIP REQUIRED
FILLER STRIP REQ
Illus. C
Built-In Refrigeration
33
BUILT-IN
subzero.com/specs
Dual Installation
3
FLUSH INSET INSTALLATION
TOP VIEW
26 3/16" 24" (610)
11/4"
(32)
TWO UNITS WITH
3/4" (19) PANEL
CLEAT
26 3/16" 24" (610)
TOP VIEW
OPENING
(665)
DEPTH
FLUSH
INSET TO CLEAT
DEPTH
CLEAT
3" (76)
typical
DETAIL A
2 3/16" (56)
2 3/16"
1/4"
(6)
PRO 48
DEPTH
(665)
FLUSH TO CLEAT
INSET
DEPTH
(56)
11/4"
CLEAT
(32)
24" (610)
DEPTH TO CLEAT
Detail A
2 3/16"
(56)
26 3/16" (665)
FLUSH INSET DEPTH
(76)
83 3/4"
4" (102)
(2127)
HEIGHT
TO CLEAT
A
11/4"
11/4"
WIDTH TO CLEAT
(32)
SHADED
AREA
MUST BE
FINISHED
(32)
84"
B
(2134)
FLUSH
INSET
HEIGHT
FLUSH INSET WIDTH
24" (610)
OPENING
DEPTH TO
CLEAT
INTEGRATED
3" typical
CLEAT
2 3/16" (56)
11/4"
(32)
Detail B
SIDE VIEW
FRONT VIEW
Two 30" (762) Models
59 3/4" (1518) 62 1/4" (1581)
IMPORTANT NOTE: A dual installation kit will be required
for this installation.
30" (762) and 36" (914) Models
65 3/4" (1670) 68 1/4" (1734)
Dimensions assume a 3/4" (19) panel thickness.
Two 36" (914) Models
71 3/4" (1822) 74 1/4" (1886)
Opening Widths
A
B
WINE STORAGE
DETAIL B
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
34
C
5
Dual Installation
PRO 48
FLUSH INSET PANEL OFFSETS
When installing two built-in models side by side in a flush
inset application, you must decrease the width of the decorative flush inset panels by 1/2" (13). Adjustments to the
panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the
panels do not collide when closing. Panel dimensions in
the chart below have been adjusted to reflect the
decrease in panel dimensions.
IMPORTANT NOTE: If a filler strip is not used, dual installations can only be accomplished using two units with
opposite hinges.
INTEGRATED
TOP VIEW
TOP VIEW
DOOR / DRAWER / GRILLE
DUAL
TRIM
DOOR
BACKER
SPACER
DOOR
CABINETRY
FLUSH INSET PANEL
5/16" (8)
1/2"
(13)
5/16" (8)
1/8" (3)
5/8"
(16)
1/4" (6)
REVEAL
Illus. A
Illustrations A–F provide panel offsets and reveals for all
built-in models in a flush inset application. Refer to the
chart below for reference to the illustrations relating to
your specific model. All reveals are 1/2" (13) unless otherwise specified.
Illus. B
CABINETRY
1/2" (13)
GRILLE
5/16"
(8) 5/32"
(4)
GRILLE
1/8"
5/16" (3)
(8)
1/2" (13)
DOOR
3/32"
5/16" (2)
(8)
Do not exceed flush inset panel dimensions, as this
could cause damage to panels and the Sub-Zero unit.
SIDE VIEW
Illus. C
Panel Offsets
SIDE VIEW
S
Illus. D
Illus.
UNDERCOUNTER
WINE STORAGE
ALL REFRIGERATOR / ALL FREEZER
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
S
A
B
C
D
F
DOOR /
DRAWER
5/16"
(8) 3/32"
(2)
DOOR
5/8" (16)
5/16"
(8)
OVER-AND-UNDER
Doors (hinge) / Drawer / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom / Drawer Top
Drawer Bottom
A
B
C
D
E
F
DRAWER
5/32"
5/16" (4)
(8)
SIDE VIEW
Illus. E
S
SIDE VIEW
Illus. F
5
3/32"
(2)
SIDE VIEW
Built-In Refrigeration
35
BUILT-IN
subzero.com/specs
Dual Installation—Flush Inset Panels
H
H
H
H
A
H
A
B
A
H
H
A
A
H
PRO 48
B
H
H
B
W
BI-36R / BI-36F
W
W
BI-30U / BI-36U
BI-36RG
BI-36R, BI-36RG and BI-36F
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36RG
Stiles / Rails
BI-36U and BI-36UG
W
H
36 1/2" (927)
35 1/8" (892)
35 3/4" (908)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
W
H
36 1/2" (927)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
B
10 3/8" (264)
W
H
Flush Inset Panel
Spacer Panel
Backer Panel
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-30UG
Stiles / Rails
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
36 1/2" (927)
35 1/8" (892)
35 3/4" (908)
50 1/8" (1273)
49 5/16" (1253)
49 15/16" (1268)
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
36 1/2" (927)
35 1/8" (892)
35 3/4" (908)
19" (483)
18 1/16" (459)
18 11/16" (475)
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
36 1/2" (927)
35 1/8" (892)
35 3/4" (908)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
BI-36UG
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
19" (483)
18 1/16" (459)
18 11/16" (475)
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
A
B
5 3/4" (146)
5 1/4" (133)
Stiles / Rails
A
B
5 3/4" (146)
5 1/4" (133)
Grille panel dimensions listed are for a standard 84" (2134)
finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235)
finished height, add 4" (102) to height dimensions.
WINE STORAGE
A
5 3/4" (146)
BI-30U and BI-30UG
REFRIGERATOR
BI-30UG / BI-36UG
INTEGRATED
REFRIGERATOR / FREEZER
W
For dual wide grilles, refer to page 36.
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
36
PRO 48
Dual Installation Kit
INSTALLATION WITH DUAL WIDE GRILLE
INSTALLATION WITH INDIVIDUAL GRILLES
This kit will replace the existing grilles that ship with the
units and span the entire width of both units. The kit
includes a 1/4" (6) center trim strip (required for proper
installation of the dual wide grille), heater, dual kickplate
and mounting hardware. Dual wide grilles are available for
all built-in models and design applications. The overlay
dual installation kit with grille will accept overlay and dual
flush inset panels. For dual wide grille panel dimensions,
refer to the panel specifications below for your design
application. Grille panel dimensions listed are for a
standard 84" (2134) finished height.
This kit is available for those who choose to utilize the
individual grilles that ship with each unit. The kit includes a
1/4" (6) filler strip (which fills the reveal between the units
and grilles), heater and mounting hardware. This dual
installation kit is not required if a custom filler strip is used.
The filler strip should be a minimum of 2" (51) wide. Refer
to the full-scale template on page 42 for more information.
Dual Wide Grille—Overlay
INTEGRATED
TWO 30" (762) MODELS
Overlay Panel
Spacer Panel
Backer Panel
30" (762) AND 36" (914) MODELS
Overlay Panel
Spacer Panel
Backer Panel
TWO 36" (914) MODELS
Overlay Panel
Spacer Panel
Backer Panel
W
H
60 1/4" (1530)
59 3/8" (1508)
60" (1524)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
66 1/4" (1683)
65 3/8" (1661)
66" (1676)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
72 1/4" (1835)
71 3/8" (1813)
72" (1829)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
WINE STORAGE
Dual Wide Grille—Flush Inset
TWO 30" (762) MODELS
Flush Inset Panel
Spacer Panel
Backer Panel
30" (762) AND 36" (914) MODELS
Flush Inset Panel
Spacer Panel
Backer Panel
TWO 36" (914) MODELS
UNDERCOUNTER
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
61 1/4" (1556)
59 3/8" (1508)
60" (1524)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
67 1/4" (1708)
65 3/8" (1661)
66" (1676)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
W
H
73 1/4" (1861)
71 3/8" (1813)
72" (1829)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Built-In Refrigeration
37
BUILT-IN
subzero.com/specs
Accessories
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
STANDARD HANDLES
Refer to the chart below for standard handle lengths
and the stud spacing of tubular and pro handles used on
built-in models.
Standard Handles
Length
Stud Spacing
63 7/8" (1622)
45 3/16" (1147)
43 7/8" (1114)
43 7/8" (1114)
• Framed front panels in stainless steel and white
enamel.
FULL-HEIGHT DOOR
• Flush inset and dual flush inset panels in stainless steel
with tubular or pro handles.
BI-30U(G), BI-36U(G) AND BI-36UFD DOOR(S)
• Custom front panel mounting kit.
Tubular Handle
Pro Handle
Tubular Handle
Pro Handle
44 1/4" (1124)
37 1/2" (952)
36 1/4" (921)
36 1/4" (921)
24 5/16" (633)
17 9/16" (447)
16 5/16" (414)
16 5/16" (414)
30 5/16" (770)
23 5/8" (600)
22 5/16" (567)
22 5/16" (567)
PRO 48
• Grilles for an 83" (2108) or 88" (2235) finished height.
BI-30U(G) DRAWER
• Side panel in stainless steel and white enamel.
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
• Stainless steel kickplate.
• Dual installation kit with or without dual wide grille.
BI-36U(G) AND BI-36UFD DRAWER
Tubular Handle
Pro Handle
INTEGRATED
• Full-length standard and extended framed handles.
Tubular Handle
Pro Handle
• Retrofit kits for use with 600 series panels.
• Partial framed kit for dispenser models.
• Dozen egg container.
• 90° door stop.
• Replacement air purification cartridge and water filter.
WINE STORAGE
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
38
Framed Panel Thickness
PRO 48
FULL-SCALE TEMPLATE
INTEGRATED
OPTIONAL EXTENDED
FULL-LENGTH HANDLE
STANDARD
FULL-LENGTH HANDLE
1"
2"
3"
(25)
(51)
(76)
11/4" (32) PANEL
1" (25) PANEL
3/4" (19) PANEL
1/2" (13) PANEL
WINE STORAGE
1/4" (6) FRAMED PANEL
DOOR
PANEL THICKNESS
UNDERCOUNTER
FRAMED APPLICATION
Built-In Refrigeration
39
BUILT-IN
subzero.com/specs
Overlay Panel Thickness
FULL-SCALE TEMPLATE
Overlay and flush inset panels must be a minimum of 5/8"
(16) thick to support mounting the handle. Panel thickness
does not include backer and spacer panel. Mount handle
close to the opening edge of the door.
PRO 48
DEPTH OF TUBULAR
AND PRO HANDLES
2"
3"
(51)
(76)
11/4" (32) PANEL
INTEGRATED
1"
(25)
1" (25) PANEL
3/4" (19) PANEL
.10" (3) SPACER PANEL
1/4" (6) BACKER PANEL
WINE STORAGE
DOOR
PANEL THICKNESS
OVERLAY AND FLUSH INSET APPLICATIONS
UNDERCOUNTER
BUILT-IN
Built-In Refrigeration
40
Overlay Application
FULL-SCALE TEMPLATE
PRO 48
237/8" (606)
TO REAR OF UNIT
OVERALL WIDTH OF UNIT
0" (0)
1/4" (6)
1/2" (13)
3/4" (19)
1" (25)
11/4" (32)
INTEGRATED
11/2" (38)
13/4" (44)
2" (51)
21/4" (57)
21/2" (63)
23/4" (70)
3" (76)
31/4" (83)
WINE STORAGE
31/2" (89)
1" (25) THICK
PANEL
UNDERCOUNTER
3/4" (19) THICK
OVERLAY PANEL
(TYPICAL)
1/4" (6) BACKER
PANEL
0"
1" (25)
DOOR OPENING 90°
TOP VIEW
SCALE
Built-In Refrigeration
41
BUILT-IN
subzero.com/specs
Flush Inset Application
FULL-SCALE TEMPLATE
24" (610)
TO BACK WALL
For panels thicker than 3/4" (19),
a 90° door stop may be required
to prevent interference with
adjacent cabinets.
PRO 48
1 1/4" (32)
2 3/16" (56)
ASSUMES
3/4" (19)
FLUSH INSET
PANEL
THICKNESS
INTEGRATED
WINE STORAGE
1" (25) THICK
PANEL
3/4" (19) THICK
FLUSH INSET PANEL
(TYPICAL)
PANEL
0"
1" (25)
DOOR OPENING 110°
TOP VIEW
SCALE
UNDERCOUNTER
1/4" (6) BACKER
BUILT-IN
Built-In Refrigeration
42
PRO 48
FILLER STRIP
11/4" (32)
WINE STORAGE
INTEGRATED
APPROX PROFILE OF
STAINLESS STEEL WRAPPED
DOOR AND HANDLE
DOOR
OPEN 110°
Dual Installation—Standard
FULL-SCALE TEMPLATE
UNDERCOUNTER
Typical framed, overlay or stainless steel
dual installation with filler strip at
maximum 110° door opening. Depending
on panel thickness, a 90° door stop may
be required.
0"
1" (25)
STANDARD
TOP VIEW
SCALE
DOOR
CLOSED
Built-In Refrigeration
43
BUILT-IN
subzero.com/specs
FILLER STRIP
PRO 48
1 1/2" (38)
1/2" (13)
DOOR
OPEN 110°
WINE STORAGE
Dual Installation—Flush Inset
DOOR
CLOSED
INTEGRATED
PROFILE OF 3/4" (19) FLUSH INSET PANEL
AND TUBULAR HANDLE
FULL-SCALE TEMPLATE
Typical flush inset dual installation with
filler strip at maximum 110° door
opening. Depending on panel thickness,
a 90° door stop may be required.
1" (25)
TOP VIEW
SCALE
UNDERCOUNTER
0"
FLUSH INSET
MODEL 648PROG
PRO 48 Refrigeration
45
BUILT-IN
subzero.com/specs
PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monument
to food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its
bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in
or freestanding.
KEY FEATURES
48"
4
(1219)
48"
• Can be used freestanding or installed as a standard or
flush built-in application.
PRO 48
PRO 48 MODELS
(1219)
• Stainless steel interior as well as exterior.
• Handles coordinate with handles of Wolf ranges.
84"
84"
(2134)
(2134)
• Dual refrigeration system enhanced with triple evaporators allow independent control of storage conditions in
refrigerator cabinet and drawer compartments.
• Advanced water filtration system.
648PRO
648PROG
• Exterior temperature display.
INTEGRATED
• Slide-out stainless steel bins fit neatly under refrigerator glass shelves.
• Flip-up grille provides easy access for quick routine
maintenance.
• Star-K certified.
WINE STORAGE
UNDERCOUNTER
BUILT-IN
PRO 48 Refrigeration
46
PRO 48 Models
OVERALL DIMENSIONS
25 7/8" (657)
PRO 48
48" (1219)
84"
(2134)
42 1/8"
INTEGRATED
(1070)
30 1/2"
(775)
4" (102)
HEIGHT DIMENSIONS ± 1/2" (13)
30 3/16" (767)
23 7/8"
(606)
14 1/2"
21" (533)
WINE STORAGE
(368)
SPECIFICATIONS
30 3/4"
(781)
Capacity / Weight
INTERIOR CAPACITY
648PRO and 648PROG
SHIPPING WEIGHT
2 3/8" (60)
UNDERCOUNTER
MODELS 648PRO AND 648PROG
648PRO
648PROG
R CU FT (L)
F CU FT (L)
18.4 (521)
11.7 (331)
LBS (KG)
860 (390)
875 (397)
PRO 48 Refrigeration
47
BUILT-IN
subzero.com/specs
PRO 48 Models
STANDARD AND FLUSH BUILT-IN INSTALLATIONS
TOP VIEW
OPENING
WIDTH
OPENING
HEIGHT
FRONT VIEW
Standard
Flush
Opening Width
47 1/2" (1206)
48" (1219)
Opening Height
83 3/4"
Opening Depth
WINE STORAGE
SIDE VIEW
Opening Dimensions
INTEGRATED
OPENING
DEPTH
PRO 48
OPENING
DEPTH
(2127)
84 1/8" (2137)
24" (610)
26" (660)
IMPORTANT NOTE: For standard built-in installations, the
face frame of the unit will extend 2" (51) beyond cabinetry.
In flush built-in installations, the front of the face frame will be
flush with surrounding cabinetry.
UNDERCOUNTER
BUILT-IN
PRO 48 Refrigeration
48
Planning Information
PRO 48
PRO 48 models can be used freestanding or installed as a
standard or flush built-in application. For standard built-in
installations, the face frame of the unit will extend 2" (51)
beyond cabinetry. In flush built-in installations, the front of
the face frame will be flush with surrounding cabinetry.
ELECTRICAL REQUIREMENTS
INTEGRATED
For PRO 48 models, the electrical supply should be
located within the shaded area shown in the illustration
below. Follow the National Electrical Code and local codes
and ordinances when installing the receptacle. A separate
circuit, servicing only this appliance, is required. A ground
fault circuit interrupter (GFCI) is not recommended and
may cause interruption of operation.
Electrical Requirements
Power Supply
115 V AC, 60 Hz
Circuit Breaker
PLUMBING REQUIREMENTS
PRO 48 models come with an automatic ice maker and a
water filtration system. The water supply line should be
located within the shaded area shown in the illustration
below. The water supply line should be connected to the
house supply with an easily accessible shut-off valve
between the supply and the unit. Do not use self-piercing
valves. A saddle valve kit is available through your authorized Sub-Zero dealer. The water line must not interfere
with installation of the anti-tip bracket.
IMPORTANT NOTE: A reverse osmosis system can be
used provided there is constant water pressure of 35 psi
(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times.
In this application, the water filtration system must be set
to bypass mode. This is achieved by removing the water
filter cartridge. Refer to the PRO 48 installation guide
packed with the unit for detailed instructions. A copper
line is not recommended for this application.
15 amp
Receptacle
3-prong grounding-type
Plumbing Requirements
1/4"
Water Supply Line
OD copper, braided stainless steel
or PEX tubing
Water Pressure
FRONT VIEW
7"
WINE STORAGE
(178)
35–120 psi (2.4–8.3 bar)
Excess Water Line for Connection
E
6"
(152)
75 1/2"
(1918)
FROM
FLOOR
6"
(152)
Location of electrical supply.
3" (76)
5 3/16"
(132)
FLOOR
UNDERCOUNTER
FRONT VIEW
Location of water supply.
36" (914)
49
subzero.com/specs
BUILT-IN
PRO 48 Refrigeration
Accessories
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
PRO 48
• Stainless steel side panels and top for freestanding
application.
• Stainless steel side panel.
• Stainless steel front and side kickplates.
• Slide-out stainless steel refrigerator bin.
• Refrigerator drawer dividers for compartmentalized
storage.
• Dozen egg container.
• Replacement water filter.
INTEGRATED
• 90° door stop.
WINE STORAGE
UNDERCOUNTER
MODELS IC-27F, 427G (WINE) AND IC-27R
Integrated Refrigeration
51
BUILT-IN
subzero.com/specs
Integrated Refrigeration. With custom front panels and hardware, Sub-Zero invented integrated columns, tall and
drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration
as practical and beautiful in the master suite, bar or theatre room as in the kitchen.
27"
27"
(686)
(686)
81"
81"
(2057)
(2057)
27"
27"
(686)
(686)
80"
80"
80"
(2032)
(2032)
(2032)
3
IC-27FI
3
3
700TR
700TFI
36"
36"
36"
(914)
(914)
(914)
700TCI
INTEGRATED
IC-27R
27"
(686)
PRO 48
INTEGRATED MODELS
80"
80"
80"
27"
27"
27"
(2032)
(2032)
(2032)
(686)
(686)
(686)
736TFI
736TCI
341/2"
341/2"
(876)
(876)
(876)
700BR
700BF(I)
700BC(I)
WINE STORAGE
736TR
341/2"
KEY FEATURES
• Custom front panels and hardware allow for infinite
design options.
• Energy efficient; many models are ENERGY STAR®
qualified.
• Point-of-use refrigeration that can be placed anywhere
• Drawer models are Star-K certified—column and tall
models are Star-K compliant with harness kit.
in the home.
UNDERCOUNTER
• Dual refrigeration; two compressors preserve food’s
goodness in self-contained compartments.
BUILT-IN
Integrated Refrigeration
52
Overall Dimensions
COLUMN MODELS
27" (686) TALL MODELS
27" (686)
24" (610)
27" (686)
14" (356)
1 5/8"
PRO 48
24" (610)
14" (356)
13/16"
(21)
(41)
78 9/16"
78 9/16"
(1995)
(1995)
81"
80"
(2057)
TO TOP OF
OPENNG
(2032)
TO TOP OF
OPENNG
3/8"
(10)
INTEGRATED
1/2"
(13)
13 1/4"
(337)
10 1/4"
34 1/2"
(876)
(260)
20 3/8"
(518)
9 3/4"
9 3/4" (248)
4"
WINE STORAGE
1/2" (13) ± ADJUSTMENT IN LEVELING LEGS
UNDERCOUNTER
(248)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
(102)
24"
24"
(610)
(610)
(102)
4 5/8"
4 5/8"
(117)
(117)
251/2"
191/2"
251/2"
(648)
(495)
(648)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS IC-27R AND IC-27FI
MODELS 700TR, 700TFI AND 700TCI
Overall dimensions do not include panels or handles.
Integrated Refrigeration
53
BUILT-IN
subzero.com/specs
Overall Dimensions
36" (914) TALL MODELS
36" (914)
24" (610)
14" (356)
PRO 48
1 5/16"
(33)
77 13/16"
(1976)
80"
(2032)
TO TOP OF
OPENNG
3/8"
(10)
1/2"
(13)
13 1/4"
(337)
INTEGRATED
10 1/4"
34 1/2"
(876)
(260)
20 3/8"
(518)
9 3/4"
(248)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
(102)
24"
7" (178)
191/2"
34 1/2"
(495)
(876)
MODELS 736TR, 736TFI AND 736TCI
UNDERCOUNTER
DIMENSIONS WILL VARY WITH PANEL THICKNESS
WINE STORAGE
(610)
BUILT-IN
Integrated Refrigeration
54
Overall Dimensions
Capacity and Weight
DRAWER MODELS
Interior Capacity
R cu ft (L)
F cu ft (L)
COLUMN MODELS
27" (686)
3/8"
(10)
24" (610)
IC-27R
IC-27FI
16.2 (459)
16.3 (462)
PRO 48
27" (686) TALL MODELS
1/2"
(13)
700TR
700TFI
700TCI
13 1/4"
(337)
34 1/2"
(876)
15.5 (439)
10.2 (289)
36" (914) TALL MODELS
10 1/4"
(260)
736TR
736TFI
736TCI
20 3/8"
(518)
9 3/4" (248)
HEIGHT DIMENSIONS ± 1/2" (13)
4"
(102)
20.9 (592)
13.3 (377)
INTEGRATED
24"
(610)
700BR
700BF(I)
700BC(I)
5.3 (150)
2.9 (82)
(495)
WINE STORAGE
25 7/8" (657)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS 700BR, 700BF(I) AND 700BC(I)
5.1 (144)
2.1 (59)
lbs (kg)
IC-27R, IC-27FI, 700TR, 700TFI and 700TCI
360 (163)
736TR, 736TFI and 736TCI
480 (218)
700BR, 700BF(I) and 700BC(I)
191/2"
21.5 (609)
7.1 (201)
27" (686) DRAWER MODELS
Shipping Weight
UNDERCOUNTER
15.3 (433)
5.1 (144)
190 (86)
Integrated Refrigeration
55
BUILT-IN
subzero.com/specs
Opening Dimensions
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back or cabinets forward to
achieve a flush fit. This will require a minimum rough opening
depth of 25" (635).
INTEGRATED MODELS
TOP VIEW
Opening Dimensions
A
OPENING WIDTH
WINE STORAGE
SIDE VIEW
B
OPENING
HEIGHT
INTEGRATED
25" (635)
OPENING DEPTH
PRO 48
25" (635)
OPENING
DEPTH
FRONT VIEW
A
B
IC-27R and IC-27FI
27" (686)
81" (2057)
700TR, 700TFI, 700TCI
27" (686)
80" (2032)
736TR, 736TFI, 736TCI
36" (914)
80" (2032)
700BR, 700BF(I), 700BC(I)
27" (686)
34 1/2" (876)
UNDERCOUNTER
BUILT-IN
Integrated Refrigeration
56
INTEGRATED
PRO 48
Electrical Requirements
The electrical supply should be located within the shaded
area shown in the illustrations. Follow the National
Electrical Code and local codes and ordinances when
installing the receptacle. A separate circuit, servicing only
this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
IMPORTANT NOTE: It is critical that the electrical outlet be
located within the shaded area shown so it does not interfere with installation of the anti-tip bracket. It must be
flush with the back wall and positioned with the grounding
prong to the right of the thinner blades.
21/2"
(64)
1/4"
(6)
WINE STORAGE
21/2"
(64)
13" (330)
FLOOR
FRONT VIEW
27" (686) models.
UNDERCOUNTER
LEFT SIDE
OF OPENING
LEFT SIDE
OF OPENING
17 1/2" (445)
4 1/2"
4 1/2"
(114)
(114)
1/4"
(6)
FLOOR
FRONT VIEW
36" (914) models.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
115 V AC, 60 Hz
15 amp
3-prong grounding-type
Integrated Refrigeration
57
BUILT-IN
subzero.com/specs
Plumbing Requirements
IMPORTANT NOTE: It is critical that the water line be
located within the shaded area shown so it does not interfere with installation of the anti-tip bracket.
(343)
BACK
WALL
6"
11/2"
(152)
(38)
21/2" (64)
21/2" (64)
13 1/2"
(343)
3" (76)
11/2" (38)
3/4"
FRONT VIEW (19)
FLOOR
TOP VIEW
36" (914) models.
Plumbing Requirements
Water Supply Line
1/4"
OD copper, braided stainless steel
or PEX tubing
Water Pressure
Excess Water Line for Connection
20–100 psi (1.4–6.9 bar)
27" (686)
INTEGRATED
IMPORTANT NOTE: A reverse osmosis system can be
used provided there is constant water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar) supplied to the unit at all times.
In some cases, a reverse osmosis water filter system
may not be able to maintain the minimum pressure
consistently. A copper line is not recommended for this
application.
13 1/2"
PRO 48
For integrated models with an automatic ice maker, the
water supply line should be located through the floor or
back wall, within the shaded area shown in the illustrations. The water supply line should be connected to the
house supply with an easily accessible shut-off valve
between the supply and the unit. Do not use self-piercing
valves. A saddle valve kit is available through your authorized Sub-Zero dealer.
9"
(229)
BACK
WALL
6"
11/2"
(152)
21/2" (64)
(38)
21/2" (64)
9"
(229)
11/2" (38)
3/4"
FRONT VIEW (19)
FLOOR
27" (686) models.
TOP VIEW
WINE STORAGE
3" (76)
UNDERCOUNTER
BUILT-IN
Integrated Refrigeration
58
Cabinetry Applications
FRAMELESS CABINETRY
26 3/4" (679)
PANEL WIDTH
26 3/4" (679)
PANEL WIDTH
1/8"
(3)
35 3/4" (908)
PANEL WIDTH
1/8"
(3)
PRO 48
1/8"
(3)
76 7/8"
45 3/8"
45 3/8"
(1953)
(1153)
(1153)
807/8"
79 7/8"
79 7/8"
(2054)
(2029)
(2029)
INTEGRATED
1/8"
(3)
1/8"
(3)
13 9/16"
13 9/16"
(345)
(345)
1/8"
(3)
4" (102)
1/8"
(3)
16 11/16"
16 11/16"
(424)
(424)
4" (102)
4" (102)
WINE STORAGE
27" (686)
FINISHED OPENING
COLUMN MODELS
36" (914)
FINISHED OPENING
36" (914) TALL MODELS
27" (686) TALL MODELS
Typical Panel Dimensions
COLUMN MODELS
Door
27" (686) TALL MODELS
Door
Top Drawer
Bottom Drawer
36" (914) TALL MODELS
Door
Top Drawer
Bottom Drawer
UNDERCOUNTER
27" (686)
FINISHED OPENING
DRAWER MODELS
Top Drawer
Bottom Drawer
W
H
26 3/4" (679)
76 7/8" (1953)
W
H
26 3/4" (679)
26 3/4" (679)
26 3/4" (679)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
W
H
35 3/4" (908)
35 3/4" (908)
35 3/4" (908)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
W
H
26 3/4" (679)
26 3/4" (679)
13 9/16" (345)
16 11/16" (424)
Panel dimensions are based on a 1/8" (3) reveal. A reveal of up
to 1/4" (6) is possible with adjustments to panel dimensions.
26 3/4" (679)
PANEL WIDTH
1/8"
(3)
13 9/16"
(345)
1/8"
(3)
34 1/2"
(876)
16 11/16"
(424)
4" (102)
27" (686)
FINISHED OPENING
DRAWER MODELS
Integrated Refrigeration
59
BUILT-IN
subzero.com/specs
Cabinetry Applications
TOE KICK CLEARANCE
The height of the door panel can extend beyond the
typical panel height, provided you do not exceed the panel
weight limit. The illustration below shows how the panel
may be extended and what you need to consider to finish
the area behind the door panel.
The toe kick clearance can vary with the height of the
panel. You must keep a minimum space of 4" (102) clear
below the bottom edge of the panel for proper venting. In
addition, any decorative base molding must be removable
and cannot exceed 4" (102) in height.
IMPORTANT NOTE: The decorative valance used to finish
the area behind the door panel must stay behind the front
plane of the finished molding.
25" (635) TO WALL
INTEGRATED UNIT
(SIDE VIEW)
11/2"
(38)
DOOR
PANEL
OVERALL
HEIGHT
DECORATIVE VALANCE
HEIGHT
OF PANEL
KICKPLATE/GRILLE
CAN BE ADJUSTED
FORWARD
INTEGRATED
DECORATIVE VALANCE
CANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
1/8" (3)
PRO 48
DOOR PANEL HEIGHT
KICKPLATE/GRILLE
1/8" (3)
BASE MOLDING
MUST BE
REMOVABLE—
4" (102) MAX
HEIGHT
REMOVABLE MOLDING
MINIMUM
HEIGHT
HINGE
4" (102) TO 9" (229)
25" (635) TO WALL
FROM FLOOR
INTEGRATED UNIT
(SIDE VIEW)
2 5/8" (67) TO 4" (102)
UPPER VALANCE
KICKPLATE / GRILLE AREA
COLUMN AND TALL MODELS
ALL INTEGRATED MODELS
WINE STORAGE
TYPICAL
HEIGHT
OF DOOR
PANEL
UNDERCOUNTER
BUILT-IN
Integrated Refrigeration
60
Cabinetry Applications
PRO 48
Integrated refrigeration is compatible with virtually any
style and look of cabinetry. These models can be used
with framed as well as frameless cabinetry. Because of the
precise application and the look you may want to achieve,
keep the following considerations in mind:
The thickness of the front panels can vary. A minimum
(16) thick panel is required, but the thickness can be
increased provided the panel weight limit is not exceeded.
5/8"
INTEGRATED
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. You must
allow for the thickness of the panel you are applying when
planning for the finished rough opening depth if you want
the front panel to be flush with surrounding cabinetry. You
may have to move the unit back into drywall or bring the
cabinets forward to achieve a flush fit.
Reveals between panels can vary. A reveal of 1/8" (3) is
typical, but reveals can be increased to up to 1/4" (6).
UNDERCOUNTER
WINE STORAGE
As reveals between cabinetry and the unit decrease,
the potential exists for severe finger pinching while the
door is closing.
When 3/4" (19) or thicker panels are used with a reveal of
less than 1/4" (6), door panels may cause damage to the
unit when the door is opened to the maximum 105°.
Use the built-in 90° door stop.
IMPORTANT NOTE: The inside edges of the rough opening
as well as the sides and a portion of the backside of the
decorative panels will need to be finished, as they will be
exposed when the doors are open.
D-style handles are recommended. For the cabinet door,
handles must be located near the edge of the panel
opposite the hinge, centered top to bottom. Locate
handles in the top center area of the drawer panels.
Illustrations on the following pages show typical applications of frameless and framed cabinetry. Also refer to the
full-scale illustration at the end of this section for specifics
on door openings.
Panel Requirements
COLUMN MODELS
MAX WEIGHT
Door Panel
65 lbs (29 kg)
TALL AND DRAWER MODELS
MAX WEIGHT
27" (686) Door Panel
27" (686) Drawer Panel
36" (914) Door Panel
36" (914) Drawer Panel
40 lbs (18 kg)
12 lbs (5 kg)
53 lbs (24 kg)
16 lbs (7 kg)
PANEL THICKNESS
All Panels
MINIMUM
5/8"
(16)
Integrated Refrigeration
61
Dual Installations
The illustrations below show typical applications of framed
and frameless cabinetry. Refer to the full-scale templates
at the end of this section for specifics on door openings.
Two integrated units may be placed side by side in a dual
installation. Depending on the models specified, opening
widths will be 54" (1372), 63" (1600) or 72" (1829). Panel
width dimensions will vary slightly from single installations.
Refer to the chart below for typical panel dimensions. The
dimensions are based on a 1/8" (3) reveal. A reveal of up to
1/4" (6) is possible with adjustments to panel dimensions.
INTEGRATED
UNIT
CABINET
CABINET
INTEGRATED
UNIT
PRO 48
Cabinetry Applications
BUILT-IN
subzero.com/specs
Typical Panel Dimensions
COLUMN MODELS
Door
27" (686) MODELS
PANEL
DOOR
1/8" (3)
REVEAL
FINISHED
OPENING
1/8" (3)
REVEAL
FINISHED
OPENING
Framed—standard overlay.
UNIT
CABINET
CABINET
INTEGRATED
UNIT
Door
Top Drawer
Bottom Drawer
36" (914) MODELS
Door
Top Drawer
Bottom Drawer
H
76 7/8" (1953)
W
H
26 13/16" (681)
26 13/16" (681)
26 13/16" (681)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
W
H
35 13/16" (910)
35 13/16" (910)
35 13/16" (910)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
A dual installation kit is required for installations with 2"
(51) or less space between the units. Dual installation kits
are available through your authorized Sub-Zero dealer.
INTEGRATED
Framed—full overlay.
PANEL
DOOR
W
26 13/16" (681)
DOOR
PANEL
PANEL
DOOR
1/8" (3)
REVEAL
Framed—beaded inset.
1/8" (3)
REVEAL
FINISHED
OPENING
Frameless cabinetry.
WINE STORAGE
FINISHED
OPENING
IMPORTANT NOTE: If a 27" (686) unit is installed next to
a 36" (914) tall unit, the decorative front panels will align,
however, the face frames will not. This is only apparent
when both doors are open at the same time. Due to a
more robust hinge on 36" (914) units, the face frame was
reconfigured to maintain a consistent overall panel height.
Refer to the illustration below.
736TCI
UNDERCOUNTER
Face frame alignment.
BUILT-IN
Integrated Refrigeration
62
Accessories
PRO 48
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
STANDARD HANDLES
Refer to the chart below for standard handle lengths
and the stud spacing of tubular and pro handles used on
integrated models.
• Stainless steel front panels with tubular or pro handles.
Standard Handles
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
• Dual installation kit.
Length
Stud Spacing
41 3/16" (1046)
39 9/16" (1006)
33 1/4" (845)
38 5/16" (973)
24 3/16" (614)
21" (533)
16 1/4" (413)
19 11/16" (500)
33 3/16" (843)
30" (762)
25 1/4" (641)
28 3/4" (730)
DOOR
Tubular Handle
Pro Handle
27" (686) MODEL DRAWERS
• Crisper drawer with shelf assembly, deli drawer with
shelf and crisper cover with lid for certain models.
Tubular Handle
Pro Handle
36" (914) MODEL DRAWERS
• Dozen egg container.
UNDERCOUNTER
WINE STORAGE
INTEGRATED
• Harness kit for Star-K compliance.
Tubular Handle
Pro Handle
Integrated Refrigeration
63
I
Maximum Door Opening
BUILT-IN
subzero.com/specs
INTEGRATED
DOOR
MAXIMUM 105° OPENING
FULL-SCALE TEMPLATE
If the panel is thicker than 3/4" (19), use the built-in 90°
door stop to prevent damage to the panel and face frame
at the maximum door opening.
TOP VIEW—1/4 SCALE
PRO 48
LINE OF
INTERFERENCE
105° OPENING
LINE OF INTERFERENCE
MAXIMUM 105° OPENING
1/8" (3) MINIMUM REVEAL
INTEGRATED
FRAMED PANEL
3/4" (19)
MOUNTING BRACKET
INTEGRATED DOOR CLOSED
WINE STORAGE
LINE OF INTERFERENCE
SIDE MOLDING AND
INSTALLATION HARDWARE
1" (25)
TOP VIEW—FULL-SCALE
SCALE
UNDERCOUNTER
0"
DOOR CLOSED
MODEL WS-30
Wine Storage
65
BUILT-IN
subzero.com/specs
Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to
ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps
make a wine collection an element of beauty in the home.
3
27"
2
(686)
15 1/8"
237/8"
241/4"
(384)
80"
(606)
(616)
(2032)
34 1/16"
34"
(865)
(864)
8
80"
8
(2032)
84"
(2134)
343/163"
(868)
424G
424FSG
427G
427RG
WS-30
INTEGRATED
315W
30"
(762)
27"
(686)
PRO 48
WINE STORAGE MODELS
KEY FEATURES
• Integrated, overlay, flush inset and stainless steel
design options.
• Two independent storage zones maintain temperature,
humidity and UV protection.
• Full-view glass door standard on all models.
• Roller-assembly wine shelves with natural cherrywood
facing have three-quarter extension for easy access.
• Discreet interior lighting with illuminated display shelf
for prized bottles of wine.
• Wine shelves accommodate 750 ml bottles, halfbottles and magnums.
WINE STORAGE
• Freestanding model 424FSG does not require panels or
surrounding cabinetry.
UNDERCOUNTER
BUILT-IN
Wine Storage
66
Overall Dimensions
UNDERCOUNTER WINE STORAGE
PRO 48
15 1/8" (384)
24" (610)
23 7/8" (606)
341/16"
34"
(865)
(864)
4" (102)
4" (102)
INTEGRATED
24" (610)
16 5/8"
(422)
25 3/8"
(645)
1 3/4" (44)
UNDERCOUNTER
WINE STORAGE
1 3/4" (44)
MODEL 315W
MODEL 424G
Refer to page 83 for door clearance information.
Refer to page 83 for door clearance information.
Overall dimensions are based on stainless steel panels
and handles.
Wine Storage
67
BUILT-IN
subzero.com/specs
Overall Dimensions
FULL-SIZE WINE STORAGE
27" (686)
24" (610)
27" (686)
14" (356)
24" (610)
14" (356)
13/16"
(21)
PRO 48
13/16"
(21)
78 9/16"
78 9/16"
(1995)
(1995)
80"
80"
(2032)
OPENING
HEIGHT
(2032)
OPENING
HEIGHT
3/8"
(10)
1/2"
(13)
13 1/4"
(337)
INTEGRATED
10 1/4"
34 1/2"
(876)
(260)
20 3/8"
(518)
8 15/16"
9 3/4"
(227)
(248)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
4"
HEIGHT DIMENSIONS ± 1/2" (13)
(102)
24"
(610)
4 5/8"
4 5/8"
(117)
(117)
251/2"
191/2"
251/2"
(648)
(495)
(648)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODEL 427G
MODEL 427RG
Overall dimensions do not include panels or handles.
UNDERCOUNTER
WITH REFRIGERATOR DRAWERS
WINE STORAGE
24"
(610)
(102)
BUILT-IN
Wine Storage
68
Overall Dimensions
Capacity and Weight
FULL-SIZE WINE STORAGE
Storage Capacity
26 3/16" (665)
PRO 48
30" (762)
84"
(2134)
73 3/4"
4" (102)
INTEGRATED
23 7/8" (606)
23 7/8"
(606)
17"
WINE STORAGE
(432)
311/4"
(796)
2 3/8" (60)
UNDERCOUNTER
MODEL WS-30
Overall dimensions are based on the stainless steel model.
For flush inset applications, add 1/2" (13) to door clearance
dimensions.
Bottles (750 ml)
R cu ft (L)
26
424G
46
427G
132
427RG
78
WS-30
147
5.3 (150)
Shipping Weight
lbs (kg)
315W
118 (54)
424G
(1873)
HEIGHT DIMENSIONS ± 1/2" (13)
315W
195 (88)
424FSG
220 (100)
427G
395 (179)
427RG
410 (186)
WS-30
445 (202)
Wine Storage
69
BUILT-IN
subzero.com/specs
Opening Dimensions
UNDERCOUNTER WINE STORAGE
FULL-SIZE WINE STORAGE
TOP VIEW
TOP VIEW
24" (610)
OPENING DEPTH
341/2" (876)
A
OPENING
HEIGHT
OPENING WIDTH
SIDE VIEW
FRONT VIEW
80" (2032)
OPENING
HEIGHT
27" (686)
OPENING WIDTH
INTEGRATED
25" (635)
OPENING DEPTH
PRO 48
25" (635)
OPENING
DEPTH
24" (610)
OPENING
DEPTH
MODELS 315W AND 424G
Opening Width
A
315W
15 1/4" (387)
424G
24" (610)
FRONT VIEW
WINE STORAGE
SIDE VIEW
MODELS 427G AND 427RG
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back or cabinets forward to
achieve a flush fit. This will require a minimum rough opening
depth of 25" (635).
UNDERCOUNTER
BUILT-IN
Wine Storage
70
Opening Dimensions
FULL-SIZE WINE STORAGE
TOP VIEW
24" (610)
OPENING
DEPTH
If two units are installed side by side, refer to pages 30–31 for
dual standard installations.
PRO 48
INTEGRATED
WINE STORAGE
24" (610)
OPENING DEPTH
SIDE VIEW
UNDERCOUNTER
MODEL WS-30
83 3/4"
(2127)
OPENING
HEIGHT
IMPORTANT NOTE: If an 83" (2108) grille height is specified,
the opening height must be decreased by 7/8" (22). If an 88"
(2235) grille height is specified, the opening height increases
by 4" (102).
29 1/2" (746)
OPENING WIDTH
FRONT VIEW
Wine Storage
71
BUILT-IN
subzero.com/specs
Planning Information
ELECTRICAL REQUIREMENTS
Electrical Requirements
The electrical supply should be located within the shaded
area shown in the illustration for your specific model.
For model 315W, the electrical supply can be located
anywhere on the back wall of the opening. Follow the
National Electrical Code and local codes and ordinances
when installing the receptacle. A separate circuit, servicing
only this appliance, is required. A ground fault circuit
interrupter (GFCI) is not recommended and may cause
interruption of operation.
Power Supply
Circuit Breaker
3-prong grounding-type
FRONT VIEW
7"
(178)
6"
75 1/2"
(1918)
FROM
FLOOR
15 1/2"
13" (330)
(394)
4 1/2"
(114)
3" (76)
FRONT VIEW
1/4"
(6)
FLOOR
FRONT VIEW
Models 427G and 427RG.
WINE STORAGE
Model 424G.
INTEGRATED
21/2"
(64)
2" (51)
E
(152)
Model WS-30.
LEFT SIDE
OF OPENING
LEFT SIDE
OF OPENING
15 amp
Receptacle
PRO 48
If you will be connecting the unit to a home security
system, you must allow a minimum of 36" (914) of the
system’s wiring to be routed in the electrical area designated for your model.
115 V AC, 60 Hz
UNDERCOUNTER
BUILT-IN
PRO 48
INTEGRATED
Wine Storage
72
Overlay Panels
Door Clearance
MODELS 315W AND 424G
MODELS 315W AND 424G
For models 315W and 424G, the overlay door panel will
affix directly to the door with screws through a series of
predrilled holes.
Models 315W and 424G can be installed flush with surrounding cabinetry. Depending on the thickness of the
overlay door panel, it may be necessary to install the unit
so that it extends 1/4" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between
the door panel and adjacent cabinetry up to a 145° door
opening. Refer to the full-scale template on page 83.
Do not install a solid panel on the glass door unit. This
may cause moisture to form behind the panel. For model
424G, a solid door is available as a sales accessory and
must be installed if a solid door panel is being specified.
Service may be required to install the door. Contact your
authorized Sub-Zero dealer for more information. For solid
door dimensions, refer to the overall glass door panel
dimensions. Refer to the charts for panel specifications.
IMPORTANT NOTE: The width of stiles and rails can be
increased but should not exceed cabinet manufacturers’
standard widths or the overall panel dimensions. The back
sides of stiles and rails that will be visible through the
glass door will need to be finished along with the inside
edges of the frame.
Overlay Panels
PANEL DIMENSIONS
315W
424G
W
H
15" (381)
23 3/4" (603)
30 1/16" (764)
30 1/16" (764)
Panel Requirements
UNDERCOUNTER
WINE STORAGE
MIN WIDTH
Stiles / Rails
2 1/4" (57)
MAX PANEL WEIGHT
Door Frame (315W)
Door Frame (424G)
10 lbs (5 kg)
10 lbs (5 kg)
MIN PANEL THICKNESS
Overlay Panels
5/8"
(16)
Freestanding Model 424FSG
Model 424FSG does not require any panels or surrounding
cabinetry. It has a finished stainless steel exterior that is
designed to be used in a freestanding application.
Wine Storage
73
BUILT-IN
subzero.com/specs
Integrated Panels
MODELS 427G AND 427RG
Integrated Panels
For models 427G and 427RG, the integrated door panel
will affix directly to the door with screws through a series
of predrilled holes. Drawer panels for model 427RG will be
applied using the integrated mounting brackets.
427G
W
H
Door
26 3/4" (679)
75 7/8" (1927)
Door
Top Drawer
Bottom Drawer
W
H
26 3/4" (679)
26 3/4" (679)
26 3/4" (679)
45 3/8" (1153)
13 9/16" (345)
16 11/16" (424)
PRO 48
Do not install a solid panel on the glass door unit. This
may cause moisture to form behind the panel. A solid door
is available as a sales accessory and must be installed if
a solid door panel is being specified. Service may be
required to install the door. Contact your authorized
Sub-Zero dealer for more information. For solid door
dimensions, refer to the overall glass door panel dimensions. Refer to the charts for panel specifications.
427RG
Panel Requirements
MIN WIDTH
Stiles
Top Rail
Bottom Rail (427G)
Bottom Rail (427RG)
2 1/4" (57)
3 3/4" (95)
8" (203)
3" (76)
MAX PANEL WEIGHT
The height of the door panel can extend beyond the
typical panel height, provided you do not exceed the panel
weight limit. The toe kick clearance can vary with the
height of the panel. Refer to specifications on page 59.
IMPORTANT NOTE: The width of stiles and rails can be
increased but should not exceed cabinet manufacturers’
standard widths or the overall panel dimensions. The back
sides of stiles and rails that will be visible through the
glass door will need to be finished along with the inside
edges of the frame.
An optional lock kit is available for models 427G and
427RG. Review the lock kit instructions to ensure your
panels will allow for adequate installation. These instructions are available on our website, subzero.com/specs.
20 lbs (9 kg)
12 lbs (5 kg)
MIN PANEL THICKNESS
All Panels
5/8"
(16)
DUAL INSTALLATIONS
For information on dual installations for models 427G and
427RG, refer to integrated dual installations on page 61.
WINE STORAGE
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design
may necessitate moving the unit back or cabinets forward
to achieve a flush fit.
Door Frame
Drawer Panel (427RG)
INTEGRATED
Panel dimensions listed in the chart, assume the models
finish off at 80" (2032) in overall height and a 4" (102) toe
kick for model 427G.
UNDERCOUNTER
BUILT-IN
Wine Storage
74
Model WS-30
PRO 48
FRAMED PANEL
FRAMED PANEL SPECIFICATIONS
If the thickness of the framed panel is less than 1/4" (6), it
must be backed up with a sheet of shim material to build
the total thickness to 1/4" (6). If the panel is thicker than
1/4" (6), a routed edge must be provided around the panel
to ensure a proper fit. Refer to the illustration below.
A
A
A
H
Routing, recessing or an extended handle may be required
on raised panels for finger clearance under the handle.
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The window cut-out edges of the framed
panel will need to be finished, as they will be exposed.
A
W
Framed Panel Requirements
WS-30 Framed
INTEGRATED
MODEL WS-30
Max Panel Weight
Min Panel Thickness
ROUT TO
1/4" (6)
WINE STORAGE
DOOR
Door Panel
MAIN FRAME
DOOR
FRAME
GLASS
Raised framed panel.
W
H
29 3/4" (756)
69 9/16" (1767)
A
Stiles / Rails
TRIM
REVEAL
1/4" (6) min
UNDERCOUNTER
75 lbs (34 kg)
1/4" (6)
3 1/8" (79)
Wine Storage
75
BUILT-IN
subzero.com/specs
Model WS-30
OVERLAY PANEL
OVERLAY PANEL SPECIFICATIONS
Overlay model WS-30 can be used in an overlay or flush
inset application. The specific application will affect panel
sizes, opening dimensions and the installation.
H
A
A
A
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The window cut-out edges of the overlay,
spacer and backer panels will need to be finished, as they
will be exposed.
Overlay Panel Requirements
MODEL WS-30
75 lbs (34 kg)
5/8" (16)
A
W
WS-30 Overlay
DOOR
Overlay Panel
Spacer Panel
Backer Panel
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 1/4" (83)
Stiles / Rails
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
H
30" (762)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Do not exceed overlay panel dimensions, as this could
cause damage to panels and the Sub-Zero unit.
OVERLAY
PANEL
SPACER PANEL
WINE STORAGE
Max Panel Weight
Min Panel Thickness
H
INTEGRATED
The overlay design allows the decorative panel to cover
the door trim for a more seamless appearance. The most
common way to achieve this look is to work with three
panels—the decorative overlay panel, which is typically
3/4" (19), a .10" (3) spacer panel and a 1/4" (6) backer panel.
Depending on your cabinet manufacturer, this could be
one panel routed for different dimensions. The illustrations
below will give you a better idea of the panel construction
and how it interacts with our frame. The size of the overlay
panel is critical, it must fit over the door frame.
PRO 48
Overlay model WS-30 will be shipped without handle
hardware and with an overlay panel grille as standard
equipment. Along with the door panel, you will need to
provide a panel for the grille and hardware to complement
your surrounding cabinetry.
SPACER
PANEL
CUSTOM PANEL
BACKER PANEL
BACKER
PANEL
TRIM
DOOR FRAME
3/4"
(19)
typical
.10" (3) 1/4" (6)
Panel assembly cross section. Panel assembly rear view.
UNDERCOUNTER
5/16" (8) min
1/8"
(3)
GLASS
BUILT-IN
Wine Storage
76
Model WS-30
FLUSH INSET PANEL SPECIFICATIONS
INTEGRATED
PRO 48
FLUSH INSET PANEL
Overlay model WS-30 used in a flush inset application
allows the decorative panel to cover the door trim for a
seamless appearance. The most common way to achieve
this look is to work with three panels—the decorative flush
inset panel, which is typically 3/4" (19), a .10" (3) spacer
panel and a 1/4" (6) backer panel. Depending on your
cabinet manufacturer, this could be one panel routed for
different dimensions. The illustrations below will give you a
better idea of the panel construction and how it interacts
with our frame. The size of the flush inset panel is critical,
it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with a
solid panel. The inside edges of the rough opening as well
as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be
exposed when the doors are open. The window cut-out
edges of the overlay, spacer and backer panels will also
need to be finished.
IMPORTANT NOTE: For flush inset panels thicker than
3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.
MODEL WS-30
WINE STORAGE
A
A
A
H
A
W
WS-30 Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 3/4" (95)
Stiles / Rails
Flush Inset Panel Requirements
Max Panel Weight
Min Panel Thickness
75 lbs (34 kg)
5/8" (16)
FLUSH INSET
PANEL
SPACER PANEL
SPACER
PANEL
FLUSH INSET PANEL
BACKER PANEL
BACKER
PANEL
TRIM
5/16" (8) min
UNDERCOUNTER
H
9/16"
(14)
Panel assembly cross
section.
3/4"
(19)
typical
.10" (3) 1/4" (6)
Panel assembly rear view.
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
31" (787)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Do not exceed flush inset panel dimensions, as this
could cause damage to panels and the Sub-Zero unit.
Wine Storage
77
BUILT-IN
subzero.com/specs
Model WS-30
DUAL INSTALLATIONS
Illustrations A–D provide panel offsets and reveals for
model WS-30 in a flush inset application. Refer to the
chart below for reference to the illustrations.
When two models WS-30 or a model WS-30 and built-in
unit are installed side by side, a dual installation kit may
be required. Contact your authorized Sub-Zero dealer for
the proper components and installation instructions. For
questions relative to the installation, call Sub-Zero at
800-222-7820. For local dealer information, visit the find a
showroom section of our website, subzero.com.
Panel Offsets
Illus.
MODEL WS-30
Door / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
A
B
C
D
TOP VIEW
CABINETRY
DOOR / DRAWER / GRILLE
1/2" (13)
1/8"
5/16" (3)
(8)
CABINETRY
GRILLE
FLUSH INSET PANEL
5/16" (8)
1/2"
(13)
5/8"
(16)
SIDE VIEW
Illus. A
Illus. B
DUAL STANDARD INSTALLATIONS
Two framed, overlay or stainless steel units may be placed
side by side in a dual installation. Some dual standard
installations will require a dual installation kit, available
through your authorized Sub-Zero dealer.
A custom filler strip can be used in between two units in a
framed, overlay or stainless steel design application. It is
recommended that the filler strip be at least 2" (51) wide,
to prevent condensation between the units. Be sure to add
the filler strip width to your rough opening width.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustration A, a dual installation accessory kit is required.
5/16"
(8) 5/32"
(4)
WITHOUT FILLER STRIP
DOOR
FILLER STRIP REQUIRED
FILLER STRIP REQUIRED
5/16"
(8)
1/2" (13)
WINE STORAGE
DOOR /
DRAWER
GRILLE
INTEGRATED
BACKER
SPACER
PRO 48
FLUSH INSET PANEL
3/32"
5/16" (2)
(8)
SIDE VIEW
SIDE VIEW
Illus. C
Illus. D
3/32"
(2)
Illus. A
W
Illus. C
UNDERCOUNTER
S
Illus. B
BUILT-IN
Wine Storage
78
Model WS-30
PRO 48
DUAL FLUSH INSET INSTALLATIONS
DUAL FLUSH INSET PANEL SPECIFICATIONS
Installing two models WS-30 or a model WS-30 and
built-in unit side by side in a flush inset application will
require adjustments to the dimensions of your finished
rough opening, panel sizes and panel offsets. It will also
require a dual installation kit, available through your
authorized Sub-Zero dealer.
INTEGRATED
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in
illustration A below. The dual installations shown in illustrations B and C require a filler strip. Illustration A is the
only application that will accommodate the dual wide
grille.
IMPORTANT NOTE: The application shown in illustration A
can only be achieved by installing dual flush inset panels.
Failure to install dual flush inset panels will cause the
handle side of the panels to collide when closing. In this
application a dual installation accessory kit is also
required.
Dual flush inset panels and dual installation kits are
available through your authorized Sub-Zero dealer. Refer
to the illustration and chart for dual flush inset panel
specifications.
FILLER STRIP REQUIRED
FILLER STRIP REQUIRED
WINE STORAGE
WITHOUT FILLER STRIP
UNDERCOUNTER
Illus. A
Illus. B
Illus. C
H
A
A
A
H
A
W
WS-30 Dual Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
69 3/4" (1772)
68 15/16" (1751)
69 9/16" (1767)
A
3 3/4" (95)
Stiles / Rails
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
H
30 1/2" (775)
29 1/8" (740)
29 3/4" (756)
9 1/4" (235)
8 5/16" (211)
8 15/16" (227)
Grille panel dimensions listed are for a standard 84" (2134)
overall height of the unit. For an 83" (2108) overall height,
subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Wine Storage
79
BUILT-IN
subzero.com/specs
Model WS-30
DUAL FLUSH INSET PANELS
TOP VIEW
TOP VIEW
IMPORTANT NOTE: If a filler strip is not used, dual installations can only be accomplished using two units with
opposite hinges.
DUAL
TRIM
DOOR
BACKER
SPACER
FLUSH INSET PANEL
5/16" (8)
1/2"
(13)
5/16" (8)
1/8" (3)
5/8"
(16)
1/4" (6)
REVEAL
Illus. A
Illus. B
CABINETRY
1/2" (13)
GRILLE
1/8"
5/16" (3)
(8)
GRILLE
1/2" (13)
DOOR
Do not exceed the flush inset decorative panel
dimensions. Exceeding dimensions could cause
damage to the panels and the Sub-Zero unit.
SIDE VIEW
Illus. C
3/32"
5/16" (2)
(8)
SIDE VIEW
S
Illus. D
Illus.
DOOR /
DRAWER
MODEL WS-30
A
B
C
D
E
S
5/16"
(8)
SIDE VIEW
WINE STORAGE
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
5/16"
(8) 5/32"
(4)
INTEGRATED
Illustrations A–E provide panel offsets and reveals for
model WS-30 in a flush inset application. Refer to the
chart below for reference to the illustrations. All reveals
are 1/2" (13) unless otherwise specified.
Panel Offsets
DOOR
CABINETRY
PRO 48
When installing two models WS-30 or a model WS-30
and built-in unit side by side in a flush inset application,
you must decrease the width of the decorative flush inset
panels by 1/2" (13). Adjustments to the panel offsets will
also need to be made. These adjustments are needed to
achieve a proper fit and to ensure the panels do not
collide when closing. Panel dimensions in the chart below
have been adjusted to reflect the decrease in panel
dimensions.
DOOR / DRAWER / GRILLE
3/32"
(2)
Illus. E
UNDERCOUNTER
5
BUILT-IN
Wine Storage
80
Side Panels
Handle Hardware
MODEL WS-30
For overlay and integrated models, handle hardware must
be provided. Optional stainless steel tubular and pro
handles are available through your authorized Sub-Zero
dealer.
PRO 48
When planning for side panels with the installation of the
model WS-30, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact
panel you are using, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may change
the width of your rough opening.
When installing a model WS-30 with a custom side panel,
an accessory kit is required. Stainless steel side panels
are also available through your authorized Sub-Zero dealer.
INTEGRATED
The side panel will need to be a minimum of 24" (610) deep
and 1/2" (13) thick. Refer to the illustrations below for side
panel dimensions. Routing will be necessary so that the
side panel fits flush against the side of the unit.
24" (610)
FRONT
OF SIDE
PANEL
1" (25)
1 7/8" (48)
1/8" (3)
ROUT TO 1/8" (3)
1/2" (13)
WINE STORAGE
1 7/8"(48)
84"
1" (25)
(2134)
Routing detail.
4" (102)
UNDERCOUNTER
MAIN
FRAME
OPTIONAL
TOE KICK
CUT-OUT
2 5/8"
(67)
Side panel dimensions.
SIDE PANEL
ROUTING
The door frame has numerous mounting holes on each
side to accommodate handle hardware. Using the predrilled holes to attach the handle will provide the best
alignment and strength.
IMPORTANT NOTE: Refer to the full-scale template at the
end of this section for a profile of the door frame and
position of the glass. Do not drill through the glass.
Wine Storage
81
Accessories
Door Frame Profile
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
FULL-SCALE TEMPLATE
BUILT-IN
subzero.com/specs
The full-scale template below shows an example of the
door frame profile for wine storage models and the relationship to the overlay panel (stiles and rails).
Dimension
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
424G and 315W
427G and 427RG
WS-30
A
1" (25)
7/8"
15/16"
PRO 48
• Stainless steel front panel with tubular or pro handle for
models 427G and 427RG.
(22)
(24)
• Grille for an 83" (2108) or 88" (2235) finished height for
model WS-30.
• Side panel in stainless steel or white enamel and
stainless steel kickplate for model WS-30.
• Dual installation kit.
GLASS
• UL approved door lock.
• 90° door stop for model WS-30.
• Harness kit for Star-K compliance.
INTEGRATED
• Full-length standard or extended framed handle for
model WS-30.
PANEL
PROFILE
CL
STANDARD HANDLES
Standard Handles
Length
Stud Spacing
24 3/16" (614)
21" (533)
16 1/4" (413)
19 11/16" (500)
41 3/16" (1046)
39 9/16" (1006)
33 1/4" (845)
38 5/16" (973)
63 7/8" (1622)
45 3/16" (1147)
43 7/8" (1114)
43 7/8" (1114)
A
2 1/4" (57) RAIL / STILE
315W, 424G, 424FSG, 427RG DRAWERS
Tubular Handle
Pro Handle
A
DOOR FRAME PROFILE
WINE STORAGE
Refer to the chart below for standard handle lengths and
the stud spacing of tubular and pro handles used on wine
storage models.
MODEL 424G SHOWN
427G AND 427RG DOOR
Tubular Handle
Pro Handle
WS-30
Tubular Handle
Pro Handle
UNDERCOUNTER
BUILT-IN
Wine Storage
82
PRO 48
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
Dimension
For each model, the wine storage shelves have a natural
cherrywood facing. You can replace these strips with
wood more complementary to your design and surrounding cabinetry. Refer to the full-scale template below.
315W
424G and 424FSG
427G and 427RG
WS-30
A
10 15/16" (278)
19 1/2" (495)
20 15/15" (532)
24 9/16" (624)
Dimensions will vary for model 315W. Refer to specifications
on our website, subzero.com.
To remove the cherry strips, take the shelves out and
remove the screws. Reverse the procedure to affix the
new wood facing.
INTEGRATED
IMPORTANT NOTE: If you choose to stain or seal the
wood facing, be aware that some of these substances are
hazardous and will damage stored wine.
5/8"
MAXIMUM THICKNESS
(16)
7/64"
(3)
11/2" (38)
27/32"
(21)
5/64"
WINE STORAGE
(2)
A (WIDTH)
(9)
9/16" (14)
FRONT VIEW
WINE SHELF WOOD FACING
WINE STORAGE MODELS
UNDERCOUNTER
23/64"
SIDE VIEW
Wine Storage
83
BUILT-IN
subzero.com/specs
Door Clearance—Undercounter Models
FULL-SCALE TEMPLATE
PRO 48
To allow for a 145° door opening,
the unit should extend a minimum of
1/4" (6) beyond the front surface of
adjacent cabinetry. The unit can be
installed flush, however, there is
potential for interference with the
panel if the door is opened past 90°.
ADJACENT
CABINETRY
UNDERCOUNTER
UNIT
INTEGRATED
DOOR CLOSED
1/2"
(13)
3/4" (19) DOOR PANEL
1/8" (3)
WINE STORAGE
1/4" (6)
HINGE DETENT
AT 145° OPENING
(DOOR OPENS PAST 145°)
1" (25)
TOP VIEW
SCALE
UNDERCOUNTER
0"
DOOR OPENING 145°
MODELS 424G (WINE) AND UC-24BG
Undercounter Refrigeration
85
BUILT-IN
subzero.com/specs
Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home
office or media room. In the kitchen, a high-volume ice machine is a must for entertaining. The design flexibility of these
compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They’re ready to be fitted with
a custom cabinet panel or can be ordered with a stainless steel panel.
PRO 48
UNDERCOUNTER MODELS
23 7/8"
23 7/8"
(606)
23 7/8"
23 7/8"
(606)
34"
34"
34"
34"
(864)
(864)
(864)
UC-24BG
UC-24C(I)
15"
33 5/83"
(854)
UC-24RO
15"
(381)
(606)
(606)
(864)
UC-24R
3
UC-15I(P)
(381)
3
33 5/8"
(854)
UC-15I(P)O
• Overlay and stainless steel design applications.
• Handle options coordinate with handles of Wolf
cooking products.
• Energy efficient; many models are ENERGY STAR®
qualified.
INTEGRATED
KEY FEATURES
• Star-K certified (except ice machine models).
• Models UC-24RO and UC-15I(P)O are UL approved
for outdoor use.
WINE STORAGE
UNDERCOUNTER
BUILT-IN
Undercounter Refrigeration
86
Overall Dimensions
UNDERCOUNTER MODELS
PRO 48
23 7/8" (606)
14 3/4" (375)
24" (610)
23" (584)
34"
33 5/8"
(864)
(854)
4" (102)
INTEGRATED
4" (102)
18"
(457)
25 3/8"
(645)
6"
(152)
WINE STORAGE
1 3/4" (44)
MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO
MODELS UC-15I(P) and UC-15I(P)O
Refer to page 83 for door clearance information.
Model UC-15I overall dimensions do not include panel or
handle.
Specifications
Capacity / Weight
INTERIOR CAPACITY
UC-24R, UC-24BG and UC-24RO
UC-24C(I)
R CU FT (L)
F CU FT (L)
5.7 (161)
3.6 (102)
1.1 (31)
ICE STORAGE CAPACITY
UNDERCOUNTER
UC-15I(P) and UC-15I(P)O
LBS (KG)
26 (12)
SHIPPING WEIGHT
LBS (KG)
UC-24R, UC-24BG, UC-24C(I) and UC-24RO
UC-15I(P) and UC-15I(P)O
130 (59)
100 (45)
Undercounter Refrigeration
87
Opening Dimensions
Planning Information
UNDERCOUNTER MODELS
ELECTRICAL REQUIREMENTS
24" (610)
OPENING
DEPTH
PRO 48
For ice machine models, it is recommended that electrical
supply be placed in an adjacent cabinet. For all other
undercounter models, locate the electrical supply within
the shaded area shown in the illustration below. Follow
the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit,
servicing only this appliance, is required.
TOP VIEW
BUILT-IN
subzero.com/specs
IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O are
designed and safe for use in outdoor applications. When
installed outdoors, a ground fault circuit interrupter (GFCI)
is required to reduce the risk of electrical shock. A GFCI is
not recommended for use with other undercounter models
and may cause interruption of operation.
24" (610)
OPENING DEPTH
A
OPENING
HEIGHT
OPENING WIDTH
Electrical Requirements
Power Supply
115 V AC, 60 Hz
Circuit Breaker
15 amp
Receptacle
SIDE VIEW
Opening Width
UC-24R, UC-24BG, UC-24C(I) and UC-24RO
UC-15I(P) and UC-15I(P)O
3-prong grounding-type
INTEGRATED
341/2" (876)
FRONT VIEW
A
24" (610)
15 1/4" (387)
LEFT SIDE
OF OPENING
15 1/2"
(394)
3" (76)
WINE STORAGE
2" (51)
FRONT VIEW
Location of electrical supply.
UNDERCOUNTER
BUILT-IN
PRO 48
Undercounter Refrigeration
88
Planning Information
Drain Pump
PLUMBING REQUIREMENTS
ICE MACHINE MODELS
For model UC-24CI and ice machine models, the water
supply line should be located within the shaded area
shown in the illustrations below. The water supply line
should be connected to the house supply with an easily
accessible shut-off valve between the supply and the
unit. Do not use self-piercing valves. A saddle valve kit is
available through your authorized Sub-Zero dealer.
Undercounter ice machine models can be ordered with or
without a pump. Models without a drain pump will drain
water from the unit by gravity. A drain must be installed.
The water outlet for gravity drain models is 3/4" (19) ID and
3/8" (10) ID for pump models.
IMPORTANT NOTE: A reverse osmosis system can be
used provided there is constant water pressure of 20–100
psi (1.4–6.9 bar) supplied to model UC-24CI, and 20–80 psi
(1.4–5.5 bar) to model UC-15I at all times. A copper line is
not recommended for this application.
INTEGRATED
Plumbing Requirements
1/4"
Water Supply Line
OD copper, braided stainless steel
or PEX tubing
Water Pressure (UC-24I)
20–100 psi (1.4–6.9 bar)
Water Pressure (UC-15I)
20–80 psi (1.4–5.5 bar)
WINE STORAGE
Excess Water Line for Connection
SHADED AREA
EXTENDS 1/2" (13)
FROM BACK WALL
8"
1/2"
(13)
(203)
LOCATION OF
WATER LINE
2" (51)
15 1/2"
(394)
3" (76)
FRONT VIEW
Model UC-24CI.
UNDERCOUNTER
26" (660) min
TOP VIEW
Ice machine models.
The drain and inlet water tubes must be plumbed before
connecting to the ice machine. For the gravity drain, all
horizontal runs of drain lines must have a 1/4" (6) per 12"
(305) fall. An air gap will likely be required between the unit
and drain receptacle. A stand pipe with a trap below it
would be acceptable for the drain receptacle.
IMPORTANT NOTE: Poor drainage will cause excessive ice
melting in the ice bin.
Undercounter Refrigeration
89
Door Clearance
MODELS UC-24R, UC-24C(I) AND UC-15I(P)
MODELS UC-24R, UC-24BG AND UC-24C(I)
The overlay design allows for a decorative panel to cover
the door trim for a seamless appearance that will complement surrounding cabinetry. You may also choose to
match the handle hardware of surrounding cabinetry.
Refer to the charts for panel specifications.
Undercounter models can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay
door panel, it may be necessary to install the unit so that it
extends 1/4" (6) beyond the front surface of surrounding
cabinetry. This will prevent interference between the door
panel and adjacent cabinetry up to a 145° door opening.
Refer to the full-scale template on page 83.
MODEL UC-24BG
PRO 48
Overlay Panel
BUILT-IN
subzero.com/specs
For model UC-24BG, the overlay door panel will affix
directly to the door with screws through a series of
predrilled holes.
INTEGRATED
Do not install a solid panel on the glass door unit. This
may cause moisture to form behind the panel. A solid door
is available as a sales accessory and must be installed if a
solid door panel is being specified. Service may be
required to install the door. Contact your authorized
Sub-Zero dealer for more information. For solid door
dimensions, refer to the overall glass door panel dimensions. Refer to the charts for panel specifications.
IMPORTANT NOTE: The width of stiles and rails can be
increased but should not exceed cabinet manufacturers’
standard widths or the overall panel dimensions. The back
sides of stiles and rails that will be visible through the
glass door will need to be finished along with the inside
edges of the frame.
UC-24R AND UC-24C(I)
Overlay Panel
UC-24BG
Overlay Panel
Stiles / Rails (min)
UC-15I(P)
Overlay Panel
W
H
23 3/4" (603)
30 1/16" (764)
W
H
23 3/4" (603)
2 1/4" (57)
30 1/16" (764)
W
H
15" (381)
30 3/8" (772)
WINE STORAGE
Panel Dimensions
Panel Requirements
MAX PANEL WEIGHT
20 lbs (9 kg)
10 lbs (5 kg)
15 lbs (7 kg)
MIN PANEL THICKNESS
Overlay Panels
5/8"
(16)
UNDERCOUNTER
UC-24R and UC-24C(I)
UC-24BG
UC-15I(P)
BUILT-IN
PRO 48
Undercounter Refrigeration
90
Accessories
Door Frame Profile
These optional accessories are available through your
authorized Sub-Zero dealer. For local dealer information,
visit the find a showroom section of our website,
subzero.com.
FULL-SCALE TEMPLATE
The full-scale template shows the door frame profile for
model UC-24BG and the relationship to the overlay panel
(stiles and rails).
• Stainless steel front panel with tubular or pro handle.
• Stainless steel tubular and pro handles to match the
style of Wolf ovens and ranges.
• UL approved door lock.
STANDARD HANDLES
GLASS
INTEGRATED
Refer to the chart below for standard handle lengths and
the stud spacing of tubular and pro handles used on
undercounter models.
PANEL
PROFILE
Standard Handles
Length
Stud Spacing
24 3/16" (614)
21" (533)
16 1/4" (413)
19 11/16" (500)
CL
UNDERCOUNTER MODELS
Tubular Handle
Pro Handle
1" (25)
1" (25)
2 1/4" (57) RAIL / STILE
DOOR FRAME PROFILE
UNDERCOUNTER
WINE STORAGE
MODEL UC-24BG
Undercounter Refrigeration
91
BUILT-IN
subzero.com/specs
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
PRO 48
For models UC-24BG and UC-24C(I), follow dimensions in
the full-scale template below if you choose to replace the
natural cherrywood facing of the wine shelves with wood
more complementary to your design and surrounding
cabinetry.
5/8"
MAXIMUM THICKNESS
(16)
7/64"
(3)
INTEGRATED
11/2" (38)
27/32"
(21)
5/64"
(2)
19 1/2" (495)
23/64"
(9)
9/16" (14)
FRONT VIEW
SIDE VIEW
MODELS UC-24BG AND UC-24C(I)
UNDERCOUNTER
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub-Zero, Sub-Zero &
Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks
of Sub-Zero, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
WINE STORAGE
WINE SHELF WOOD FACING
Sub-Zero Products Limited Warranty
FOR RESIDENTIAL USE ONLY
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Sub-Zero product warranty covers all parts and labor
to repair or replace, under normal residential use, any part of the product that proves to be defective in
materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by
Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during
normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero product warranty covers all parts and labor
to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship. All service provided by Sub-Zero under
the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by
Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, your Sub-Zero product warranty covers all parts to repair
or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing
that prove to be defective in materials or workmanship.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to products
installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of
Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident
or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have
other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact
Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com or call 800-222-7820.
*Stainless steel doors, panels, handles, product frames and interior surfaces are covered by a limited 60-day
parts and labor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Sub-Zero Outdoor Products Limited Warranty
PRODUCT MUST BE APPROVED FOR OUTDOOR USE, DESIGNATED BY MODEL AND SERIAL NUMBER
FOR RESIDENTIAL USE ONLY
FULL ONE YEAR WARRANTY*
For one year from the date of original installation, your Sub-Zero product warranty covers all parts and labor
to repair or replace, under normal residential use, any part of the product that proves to be defective in
materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by
Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during
normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero product warranty covers all parts and labor
to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship. All service provided by Sub-Zero under
the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by
Sub-Zero, Inc. Service will be provided during normal business hours.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to products
installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of
Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident
or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have
other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact
Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website,
subzero.com or call 800-222-7820.
*Stainless steel doors, panels, handles, product frames and interior surfaces are covered by a limited 60-day
parts and labor warranty for cosmetic defects.
*Replacement water filters are not covered by the product warranty.
SUB-ZERO, INC.
P. O. BOX 44848
SZDG
MADISON, WI 53744
12 / 2012
SUBZERO.COM
800.222.7820
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising