PlexPower™ Factory Sealed Enclosed Circuit Breakers Catalog Pages

PlexPower™ Factory Sealed Enclosed Circuit Breakers Catalog Pages
NEC/CEC CLASS/ZONE AND ATEX/IECEx FLAMEPROOF Ex d ZONE 1 RATED CIRCUIT BREAKERS
Distribution Equipment
PlexPower™ Factory Sealed Enclosed Circuit Breakers
Stainless Steel Enclosures
NEC/CEC:
Class I, Division 2, Group B, C, D
Class I, Zone 1 AEx de IIB+H2 T5
Class II, Division 1, Group F, G
Class III
ATEX/IECEx:
Ex de IIB+H2 T6 U
Type 4X, IP66
Optional ATEX IECEx - Ex de IIB+H2 T5
Applications
• The PlexPower enclosed breaker provides indoor and outdoor
protection and control of electrical circuits in hazardous
environments such as:
— Petroleum plants
— Chemical plants
— Refineries
— Other process facilities
• Ideal for installation in wet, corrosive environments or where
flammable gases or vapors are likely to be present.
Features
• No external conduit or cable seals required making
installations faster, easier, and less costly.
• The PlexPower enclosed breaker features a ground-breaking
design that incorporates the use of a single breaker housing
to minimize the downtime and costs associated with servicing
circuit breakers in hazardous locations.
• Standard, off-the-shelf breakers are used and the lighter
weight enclosures can be quickly opened in the field for easier
servicing. There are no special breakers to buy.
• Standard configuration includes external actuator and a nonwindow door. Factory installed options include window door,
internal actuator or alternate enclosure sizes and orientations.
• Enclosure can be easily field punched for cable glands or
conduit hubs. Optional gland plates available and must be
ordered with the enclosure for factory installation.
• Circuit breaker available in 2- or 3-pole up to 150 Amp range.
• Breaker can be padlocked in either the ON or OFF position.
• Voltage ranges from 120 to 600 volts.
• QC breaker terminal wire range #14-1/0.
• F-Frame breaker terminal wire range #14-4/0.
• Ground terminal bar provided.
• External ground lug.
• Accommodates standard Cutler-Hammer ✢ QC Series or
F-Frame Series circuit breaker individually contained in its own
housing.
External Actuation Shown
NEC/CEC Certifications and Compliances
•
•
•
•
UL Standard: 67, 1203, 1604
UL Listed: 60079: 0, 7, 1
CSA Standard: C22.2: Nos. 29, 213
CSA Certified: 1788693, 60079-0, 7, 1
ATEX/IECEx Certifications and Compliances
• ATEX IECEx - Ex de IIB+H2 T5 approved version available for
RF Series only, up to 160 Amp, 1- 2- or 3-pole, add suffix -X.
Standard Materials
• Enclosure: 316L stainless steel
• Alternate enclosure: fiberglass reinforced polyester (FRP), sheet
aluminum or sheet steel (contact your local representative)
• Hardware: stainless steel
Options
Must be listed in alphanumeric sequence at the end of the catalog number.
(Contact your local representative for price and availability.)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Drain and breather add suffix —DV.
LED indicator lights add suffix —IL.
Heater add suffix —HTR.
Ground neutral bar add suffix —GN.
Standard neutral bar add suffix —NB.
Gland plate add suffix —GPL = left side, —GPR = right side,
—GPT = top, —GPB = bottom.
HID rated breaker add suffix —HID.
Door padlocking provision add suffix —P.
Phenolic nameplate (specify legend) add suffix —NP.
Stainless steel nameplate (specify legend) add suffix —SP.
Window door add suffix —W.
Sheet aluminum enclosure add suffix —L.
Powder coated sheet steel enclosure add suffix —C.
For +50 ˚C (+122 °F) breaker rating, add suffix —V.
✢ Cutler-Hammer is a registered trademark of Eaton Corporation.
984
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© November 2015
NEC/CEC CLASS/ZONE AND ATEX/IECEx FLAMEPROOF Ex d ZONE 1 RATED CIRCUIT BREAKERS
PlexPower™ Factory Sealed Enclosed Circuit Breakers
Stainless Steel Enclosures
NEC/CEC:
Class I, Division 2, Group B, C, D
Class I, Zone 1 AEx de IIB+H2 T5
Class II, Division 1, Group F, G
Class III
ATEX/IECEx:
Ex de IIB+H2 T6 U
Type 4X, IP66
Optional ATEX IECEx - Ex de IIB+H2 T5
Ordering Instructions
1. Determine breaker size using enclosure specification chart.
2. Note if breaker is QC or F-Frame type.
3. Structure catalog string using the logic shown here.
4. Enclosure is stainless steel. For fiberglass reinforced polyester (FRP) contact your local representative for price and availability.
Catalog Numbering Guide
RFE
S
Series and Breaker
Type:
RFE - F-Frame
Series Breaker
Enclosure
RQE - QC Series
Breaker
Enclosure
B
Type of Breaker:
B – FDB
C – FDC
D – FD
E – EHD
Q - QC
W – FW (ATEX)
S – F Frame Switch
L – Less Breaker
???
E
Amperage - 015 to 150 Amps
ATEX Amperage - 016 to 160
Amps
QC Amperage - 015 to 040
Amps
Number of Poles:
2 - 2 Pole
3 - 3 Pole
Options:
E - External Actuation
DV - Breather/Vent
L - LED
X - ATEX requirements
Enclosure Specifications
Material
Stainless
Steel
Size
A
B
Enclosure Dimensions in Millimeters (Inches)
(H x W x D)
370 x 370 x 200
(14.5 x 14.5 x 7.9)
560 x 370 x 200
(22.0 x 14.5 x 7.9)
Max
Amperage
Breaker
Type
40 Amp
QC-Frame
150 Amp
F-Frame
▲ To complete the catalog number please add the appropriate suffix for other options/features. These suffixes can be found under Options.
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© November 2015
985
Distribution Equipment
Breaker Enclosure Type:
S – 304 Stainless Steel
K – 316L Stainless Steel
C – Cold Rolled Power Paint Steel
L – Sheet Aluminum
P – Polyester Plastic
2
Stainless Steel Enclosures
NEC/CEC:
Class I, Division 2, Group B, C, D
Class I, Zone 1 AEx de IIB+H2 T5
Class II, Division 1, Group F, G
Class III
ATEX/IECEx:
Ex de IIB+H2 T6 U
Type 4X, IP66
Optional ATEX IECEx - Ex de IIB+H2 T5
QC
Continuous Amp Rating
at +40 °C (+104 °F)
2-Pole 120/240 Vac
3-Pole 240 Vac
Enclosure
Size
15
QC2015
QC3015H
A
20
QC2020
QC3020H
A
30
QC2030
QC3030H
A
40
QC2040
QC3040H
A
F-Frame
Maximum
Continuous
Amp Rating at
+40 °C (+104 °F)
Distribution Equipment
NEC/CEC CLASS/ZONE AND ATEX/IECEx FLAMEPROOF Ex d ZONE 1 RATED CIRCUIT BREAKERS
PlexPower™ Factory Sealed Enclosed Circuit Breakers
3-Pole
480 Vac/250 Vdc
Enclosure
Size
2-Pole
480 Vac/250 Vdc
3-Pole
480 Vac/250 Vdc
Enclosure
Size
15
EHD2015
EHD3015
A
FD2015
FD3015
A
20
EHD2020
EHD3020
A
FD2020
FD3020
A
30
EHD2030
EHD3030
A
FD2030
FD3030
A
40
EHD2040
EHD3040
A
FD2040
FD3040
A
50
EHD2050
EHD3050
A
FD2050
FD3050
A
60
EHD2060
EHD3060
A
FD2060
FD3060
A
70
EHD2070
EHD3070
B
FD2070
FD3070
B
80
EHD2080
EHD3080
B
FD2080
FD3080
B
90
EHD2090
EHD3090
B
FD2090
FD3090
B
100
EHD2100
EHD3100
B
FD2100
FD3100
B
110
—
—
—
FD2110
FD3110
B
125
—
—
—
FD2125
FD3125
B
150
—
—
—
FD2150
FD3150
B
Enclosure
Size
2-Pole
600 Vac/250 Vdc
3-Pole
600 Vac/250 Vdc
Enclosure
Size
Maximum
Continuous
Amp Rating at
+40 °C (+104 °F)
986
2-Pole
480 Vac/250 Vdc
For ATEX Applications Only
2-Pole
3-Pole
240/415/480/600/690 240/415/480/600/690
Vac
Vac
15
—
—
—
FDB2015
FDB3015
A
16
FWF2016L
FWF3016L
A
—
—
—
20
FWF2020L
FWF3020L
A
FDB2020
FDB3020
A
25
FWF2025L
FWF3025L
A
—
—
—
30
—
—
—
FDB2030
FDB3030
A
32
FWF2032L
FWF3032L
A
—
—
—
40
FWF2040L
FWF3040L
A
FDB2040
FDB3040
A
50
FWF2050L
FWF3050L
A
FDB2050
FDB3050
A
60
—
—
—
FDB2060
FDB3060
A
63
FWF2063L
FWF3063L
A
—
—
—
70
—
—
—
FDB2070
FDB3070
B
80
FWF2080L
FWF3080L
B
FDB2080
FDB3080
B
90
—
—
—
FDB2090
FDB3090
B
100
FWF2100L
FWF3100L
B
FDB2100
FDB3100
B
110
—
—
—
FDB2110
FDB3110
B
125
FWF2125L
FWF3125L
B
FDB2125
FDB3125
B
150
—
—
—
FDB2150
FDB3150
B
160
FWF2160L
FWF3160L
B
—
—
—
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© November 2015
Stainless Steel Enclosures
Size A 3-Pole Circuit QC
124 mm
(4.89”)
370 mm
(14.57”)
Size A 3-Pole Circuit F-Frame
50 mm
(1.96”)
124 mm
(4.89”)
200 mm
(7.87”)
370 mm
(14.57”)
124 mm
(3.94”)
200 mm
(7.87”)
23 mm
(0.91”)
124 mm
(3.94”)
76 mm
(3.00”)
76 mm
(3.06”)
370 mm
(14.57”)
335 mm
(13.19”)
335 mm
(13.19”)
370 mm
(14.57”)
121 mm
(4.76”)
121 mm
(3.05”)
407 mm
(16.02”)
407 mm
(16.02”)
Size B 3-Pole Circuit F-Frame
370 mm
(14.57”)
100 mm
(3.94”)
23 mm
(0.91”)
200 mm
(7.87”)
Distribution Equipment
100 mm
(3.94”)
173 mm
(6.79”)
525 mm
(20.67”)
560 mm
(22.05”)
173 mm
(6.79”)
407 mm
(16.02”)
(Used as a main breaker in the position shown)
Visit our website at www.appletonelec.com or contact us at (800) 621-1506.
© November 2015
NEC/CEC CLASS/ZONE AND ATEX/IECEx FLAMEPROOF Ex d ZONE 1 RATED CIRCUIT BREAKERS
PlexPower™ Factory Sealed Enclosed Circuit Breaker Dimensions
987
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising