PIK SERIES INSERT SPECIFICATION SHEET

PIK SERIES INSERT SPECIFICATION SHEET
SPECIFICATION SHEET
PIK SERIES
INSERT
HB0032
Especially designed to be installed in custom hood
for use over residential commercial-style
cooking surfaces.
A complete installation requires several optional
components. Refer to page 2 when planning your
installation.
FEATURES
•
•
•
•
•
•
Cabinet mount _ custom application
Widths: 33’’, 45’’
Halogen lighting (33’’_ 2 x 50 watt; 45’’_ 3 x 50 watt PAR20)
lamps not included
Slide controls: Lighting, on-off, infinite speed
Easily accessible, dishwasher-safe stainless steel
baffle filters
Heat Sentry™ turns blower ON to HIGH speed when
excess heat is detected
Mount insert so bottom of custom hood is 24’’ to 30’’
above cooking surface.
Custom Hood Liner
L33 or L45 Series
Ambient Light Panel
ALP Series
4”
Ad
j
inal
(S ust
nom 0”
6
hood
sh ee able
tom ”, 48” or
s
ee lin d
u
c
t f er ep Fits 36”, 42
or sp th
th
de ec wid
ta
ils
)
HA0027A
Backsplash
RMP Series
WCPI Remote Control
10 ”
6 3/8''
4”
OPTIONS
• Custom hood liners (L33 or L45 Series):
Widths - 36’’, 42’’, 48’’ and 60’’
Adjustable depth - see liner spec. sheet for details
Stainless Steel construction - protects custom hood base
and wipes clean easily
• Ambient light panel (ALP Series) for L Series custom
hood liners (Halogen lighting: 36’’ and 42’’_ 2 x 50 watt;
48” and 60” _ 3 x 50 watt GU10) Lamps included
• Backsplash (RMP Series):
Widths - 36”, 42”, 48”, 60”
Stainless Steel construction - protects back wall
and wipes clean easily
• WCPI Remote control: With Stainless Steel faceplate,
to fit any décor.
INSERT SPECIFICATIONS
120 VAC, 60 Hz
Amps (without blower) 0.8 (PIK33), 1.3 (PIK45)
HK0076A
18”
4 1/2''
14
4”
16”
HC0010
", 60"
2", 48
36", 4
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
40J
Date
99043298C
PIK MOUNTING
Suggested Custom Hood Internal Framework
SIZE OF THE CUT-OUT
NOTE: If optional L series liner is used, refer to installation
instructions for size and location of the cut-out.
3 1/2''
16 3/8''
17 1/16''
1 1/2”
32 1/2'' or 44 1/2''
2 1/4'' min.
HD0093A
HH0040A
NOTE: The 3 1/2’’ notch must be cut only if the WCPI
optional wall control will be installed.
PIK33
AND PIK45
INSERT SYSTEM
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Model EB6 (600 cfm)
or EB9 (900 cfm)
exterior blower
8” Rd
adjustable elbow
(optional)
Model 415
7” Rd adjustable
elbow (optional)
8” Rd
standard
duct
Model 407
(7” Rd x
24’’ section)
Model 418
10” Rd
adjustable elbow
(optional)
8” Rd metal
flexible duct
(optional)
7” Rd metal
flexible duct
(optional)
Model 459 transition
(3 1/4” x 14” to 8”)
Model 412
transition
(3 1/4” x 10” to 7”)
Adapter and damper
3 1/4’’ x 10’’
(supplied with P5
and P8 blowers)
Model 413
transition
(3 1/4” x
10” to 8”)
Adapter and damper
3 1/4’’ x 14’’
(supplied with P8 blower)
Model 421
(10” Rd. vert.
in-line damper)
Model 410
(10” Rd duct
- 2ft. sections)
10” Rd metal
flexible duct
(optional)
Flow deviator
(supplied with P5 and P8 blowers)
L3336, L3342, L4548 or
L3336,
L3342,
L4548L3342S,
or L4560
L4560,
L3336S,
Custom
Hood
Liner (optional)
L4548S,
L4560S
Custom
Hood Liner (optional)
PIK33 OR PIK45
INSERT
Exterior blower rough-in kit
(included with EB6, EB9,
EB12 and EB15 blowers
ALP36,
ALP42,
ALP30,
ALP36,
ALP48
ALP60
ALP42, ALP48
or or
ALP60
Ambient
light
panel
(optional)
Ambient
light
panel
(optional)
Rough-in kit
(supplied with P5 and P8 blowers)
WCPI
Wall control
(Optional)
Model P5
single-blower
(500 cfm)
RMP Series Backsplash
RMP Series Backsplash
Stainless Steel wall covering
(Stainless Steel wall
with warming shelves.
covering with warming
Widths available: 36”, 42”, 48”, 60”
shelves. Optional)
(optional)
HL0041
Model P8
dual-blower (900 cfm)
NOTE: The dual blower P8 can be
installed either with 7’’ round
or 8’’ round ductwork.
For optimal air and quiet sound
performance, use 8’’ round ductwork.
PIK SERIES INSERTS
BLOWER DUCTING
POSITIONS
MODEL PIK33 WITH P8 BLOWER (Vertical Outlet)
HB0032
MODEL PIK45 WITH P8 BLOWER (Vertical Outlet)
Top view
3/4’’
16 1/8’’
9 1/8’’
%.
Top view
7 5/8’’
7/8’’
3 1/4’’
7/8’’ dia.
14’’
8’’ round
transition
HK0031A
MODEL PIK33 WITH P5 BLOWER (Vertical Outlet)
3/4’’
22 1/8’’
15 1/8’’
3/4’’
11 1/8’’
%.
7 5/8’’
7/8’’
7/8’’ dia.
10’’
7’’ or 8’’
round transition
HK0030A
MODEL PIK33 WITH EB6, EB9, EB12 OR EB15
BLOWER (Vertical Outlet)
16 1/8’’
7/8’’
7/8’’ dia.
14’’
8’’ round
transition
HK0034A
MODEL PIK45 WITH P5 BLOWER (Vertical Outlet)
Top view
3 1/4’’
Top view
%.
13 5/8’’
3 1/4’’
Top view
16 1/8’’
%.
3/4’’
3 1/4’’
22 1/8’’
17 1/8’’
%.
13 5/8’’
7/8’’
7/8’’ dia.
10’’
7’’ or 8’’
round transition
HK0033A
MODEL PIK45 WITH EB6, EB9, EB12 OR EB15
BLOWER (Vertical Outlet)
22 1/8’’
6 11/16’’
1 11/16’’
Top view
%.
12 11/16’’
1 11/16’’
5 1/4’’
5 1/4’’
7/8’’ dia.
7/8’’ dia.
9 5/8’’ dia.
9 5/8’’ dia.
HK0032
HK0029
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement