24” Marvel Refrigerator and Freezer with Crescent Ice Maker and MaxStore

24” Marvel Refrigerator and Freezer with Crescent Ice Maker and MaxStore
24” Marvel Refrigerator and
Freezer with Crescent Ice
Maker and MaxStore™
Utility Bin
Model # ML24RI****
• Dynamic Cooling Technology™ delivers rapid cooldown and the
industry’s best temperature stability
• MARVEL Intuit™ Integrated Controls ensure precise refrigeration
temperature management from 34°F to 42°F and freezer a
temperature between -6° F and 6° F to keep contents evenly frozen
throughout
• Cantilevered, adjustable shelving system
• MaxStore™ roller-glide clear utility bin provides maximum volume to
effectively store large, bulky or loose items
• Pristine arctic white interior easily wipes clean and efficient white LED
interior lighting illuminates interior for better viewing
• Top-mounted vertical freezer with crescent ice maker, ice bucket and
self-closing door
• Close Door Assist System™ gently and automatically closes door
• Panel overlay option features soft-close integrated hinge for a truly
flush fit with cabinetry
• Audible and visual alarms signal when door is left ajar to protect food
integrity and energy use
• Vacation/Sabbath mode conserves energy during times when the
unit is not in use and complies with Star-K requirements
• Height adjustment up to 1” with leveling legs
• Crescent ice maker provides up to 7 lbs of ice in 24 hours
• Automatic defrost
Storage Capacity
• 4” black adjustable toe kick
Refrigerator: Up to 72 12-oz cans
Ice bucket capacity = 13 lbs
• 1-year warranty
Storage Configuration
(2) half-width cantilever, fully adjustable
steel-framed glass shelves
(1) full-width fixed position white steel-framed
glass shelf
(1) MaxStore™ Utility Bin
(1) Crescent Ice Bin
Ordering
Details
Solid Stainless Steel Door,
Right Hinge
ML24RIS3RS
Solid Stainless Steel Door,
Left Hinge
ML24RIS3LS
23⅞” W x 33¾” minimum H x 25 21/32” D (including handle)
Smooth Black Door, Right Hinge
ML24RIS3RB
Finish/Door Options
Smooth Black Door, Left Hinge
ML24RIS3LB
Smooth White Door, Right Hinge
ML24RIS3RW
Smooth White Door, Left Hinge
ML24RIS3LW
Solid Panel Ready Overlay Door,
Integrated Right Hinge
ML24RIP4RP
Solid Panel Ready Overlay Door,
Integrated Left Hinge
ML24RIP4LP
No panel installation kit required.
Product Dimensions
Stainless Steel
Black
White
Wood Overlay
(Panel Ready)
Forced
Air Fan
"A"
Evaporator
Plate
"B"
Return
Air Intake
Front
"C"
24" Rough-In Dimensions
"A"
"B"
"C"
24”
(61 cm)
**34" to 35"
(86.4 to 88.9 cm)
24”
(61 cm)
Forced
Air Fan
Cabinet Dimensions
Evaporator
Plate
"D"
"E"
"F"
23 7⁄8”
(60.7 cm)
33 3⁄4” to 34 3⁄4”
(85.7 to 88.3 cm)
23 23⁄32”
(60.2 cm)
“G”
“H”
“J”
25 21⁄32”
(65.2 cm)
46 13⁄32”
(117.9 cm)
25 11⁄16”
(65.2 cm)
Return
Air Intake
"J"
Front
Side
"H"
"D"
"G"
Dynamic Cooling Technology™
delivers rapid cool down
and the industry’s best
temperature stability
"E"
211⁄2"
(54.6 cm)
Figure 8
"F"
Width
23 ⅞"
Interior Finish
White
up to 72 12-oz cans
Ice Bucket capacity = 13 lbs
Capacity
Shelving System
Shelf Fronts
Formed Metal
MaxStore™ Utility Bin
Ice Bucket
Other Storage
Interior Lighting
Toe Grill Finish
Hinge
Handle
Cantilever
!
1 White LED Pod
Black
WARNING
Classic Hinge
Designer
Control Type
Temperature Range
Lock
Electrical Requirements
Length of Power Cord
Product Dimensions
Intuit™
Refrigerator: 34° - 42° F
Freezer: -10° - 6° F
NA
The distinctive Marvel design features a
thermal-efficient cabinet and door combined
with Dynamic Cooling Technology™ for
superior temperature stability, faster cooling
times and speedy temperature recovery.
Finishes
SS, B, W, O
Vacation /
Sabbath Mode
Yes
Agency Approvals
CSA
120V / 60Hz / 15A
5'
23 ⅞" W x 33 ¾" H x 21 ½" D
Depth to Front of Door
23 23/32"
Depth to Handle
25 21/32"
Depth with door at 90°
46 13/32"
Shipping Weight
160 lbs
Finishes Key
SS
B
W
O
=
=
=
=
Stainless Steel
Black
White
Overlay
Overlay Panels
CAUTION
To
p
Hinge side of door
Clearance for
screw head,
4 places
of
Clearance for
screw head,
4 places
p
To
do
or
OVERLAY DOOR
The preferred method of attaching the panel to the door
is to clamp the panel to the door so it cannot move while
drilling the screw pilot holes. Use bar clamps or "C" clamps
with pads on the clamping surfaces that will not mar the
panel or the door. The custom overlay panel should be
flush with the top of the door and centered along the width
of the door. See Figure 12a. DrillFigure
holes 17
through the gasket
extrusion using the 10 holes
pilotHinged
holes. Use
Left as
Hand
Doorthe drill
size from the chart in Table
"C",
being
careful
not to drill
24" (61 cm) wide appliance
through the front surface of the panel, drill no deeper than
1
⁄2" (12.7 mm) deep.
If the overlay
panel is thinner than
Clearance
for hinge
5
⁄8" (16 mm) thick shorter
will have to be obtained.
at topscrews
and bottom
Fasten the panel to the door with the 10 screws provided in
the literature pack. (See Figure 22a). Remove the clamps
23 ⁄ "
and replace the gasket
in the gasket extrusion
channels of
(60.3 cm)
⁄"
the door. Some force may be required to (6seat
mm) the gasket
Deep are seated
into the channels. Be sure the gasket corners
properly.
Clearance for hinge
at top and bottom
23 ⁄4"
(60.3 cm)
3
⁄4"
(6 mm)
Deep
3
4
1
13⁄4"
(4.4 cm)
14"
(35.6 cm)
47⁄8"
(12.4 cm)
1 ⁄16"
(3 cm)
13⁄16"
(3 cm)
Material Type
3 ⁄32"
(9.8 cm)
27
3 ⁄ "
Hardwood
27
1
32
(9.8 cm)
Softwood
⁄4" (6 mm)
radius is
permissible
1
31⁄8"
(7.9 cm)
31⁄8"
(7.9 cm)
3 1 ⁄8 "
(7.9 cm)
#10 Wood Screw
⁄8" (3.2 mm) Diameter. Pilot Hole
⁄64 (2.8 mm) Diameter. Pilot Hole
7
⁄4" (6 mm)
radius is
Table
permissible
1
111⁄16"
(4.3 cm)
41⁄8"
(10.5 cm)
2"
(5.1 cm)
311⁄16"
(9.4 cm)
1" (2.5 cm) diameter
x 1⁄4" (6 mm) deep
4 places
Figure 20
Right Hand Hinged Door
24" (61 cm) wide appliance
ML15RAP*RP
Solid, Right Hand
ML15RAP*LP
Solid, Left Hand
ML15BCF*RP
Glass, Right Hand
ML15BCF*LP
Glass, Left Hand
ML15BCP*RP
Solid, Right Hand
ML15BCP*LP
Solid, Left Hand
ML24RAP*RP
Solid, Right Hand
ML24RAP*LP
Solid, Left Hand
ML24BRF*RP
Glass, Right Hand
ML24BRF*LP
Glass, Left Hand
ML24BRP*RP
Solid, Right Hand
ML24BRP*LP
Solid, Left Hand
MA24BRF*RP
Glass, Right Hand
with Lock
MA24BRF*LP
Glass, Left Hand
with Lock
MA24RAP*RP
Solid, Right Hand
with Lock
MA24RAP*LP
Solid, Left Hand
with Lock
DIM "A"
3011⁄32" (77.1 cm)
2723⁄32" (70.4 cm)
Table D
"A"
(See Table D)
15⁄32"
(2.9 cm)
This side
facing interior
1 ⁄16"
(4.3 cm)
11
41⁄8"
(10.5 cm)
11⁄2"
(3.8 cm)
typical
DOOR
DESCRIPTION
C
15⁄32"
(2.9 cm)
This side
facing interior
MODEL
3 1 ⁄8 "
(7.9 cm)
3 1 ⁄8 "
(7.9 cm)
"A"
(See Table D)
4
13⁄4"
(4.4 cm)
14"
(35.6 cm)
47⁄8"
(12.4 cm)
3
3 1 ⁄8 "
(7.9 cm)
CAUTION
Step 4: Assemble the panel to the door
Figure 19
Right Hand Hinged Door
24" (61 cm) wide appliance
1
of
!
r
o
do
Depending on your model cut the overlay door panel to the
dimensions shown in Figures 13 to 20. Also see Table "D"
for the height dimension and door styles. The window cut
out is for glass door models only. If your appliance has a
lock also
drill the lock hole in the panel, see Figure 22.
PANEL
INSTALLATION
Hinge side of door
1 1 ⁄2 "
(3.8 cm)
typical
2"
(5.1 cm)
1" (2.5 cm) diameter
x 1⁄4" (6 mm) deep
4 places
311⁄16"
(9.4 cm)
Figure 18
Left Hand Hinged Door
24" (61 cm) wide appliance
Counter bore
lock hole
on back side.
#10 x 1/2"
screw
Figure 22a
OVERLAY DOOR PANEL INSTALLATION
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door
is to clamp the panel to the door so it cannot move while
drilling the screw pilot holes. Use bar clamps or "C" clamps
with pads on the clamping surfaces that will not mar the
panel or the door. The custom overlay panel should be
flush with the top of the door and centered along the width
of the door. See Figure 12a. Drill holes through the gasket
extrusion using the 10 holes as pilot holes. Use the drill
size from the chart in Table "C", being careful not to drill
through the front surface of the panel, drill no deeper than
1
⁄2" (12.7 mm) deep. If the overlay panel is thinner than
5
⁄8" (16 mm) thick shorter screws will have to be obtained.
Fasten the! panel to the door with the 10 screws provided in
the literature pack. (See Figure 22a). Remove the clamps
and replace the gasket in the gasket extrusion channels of
the door. Some force may be required to seat the gasket
into the channels. Be sure the gasket corners are seated
properly.
CAUTION
Material Type
Material
Type
Hardwood
Softwood
Hardwood
Softwood
#10 Wood Screw
1
#10 Wood
Screw
⁄8" (3.2 mm)
Diameter.
Pilot Hole
⁄ ⁄ "(2.8
(3.2mm)
mm)Diameter.
Diameter.Pilot
PilotHole
Hole
71
648
7
⁄64 (2.8
Table
C mm) Diameter. Pilot Hole
Table C
MODEL
DOOR
DESCRIPTION
ML15RAP*RP
Solid, Right Hand
ML15RAP*LP
ML15BCF*RP
ML15BCF*LP
ML15BCP*RP
18
DIM "A"
BRASS EXTENSION
Solid,
Left Hand
SPRING WASHER
Glass, Right Hand
NUT
Glass, Left Hand
LOCK
Solid, Right Hand
ML15BCP*LP
Solid, Left Hand
ML24RAP*RP
Solid, Right Hand
ML24RAP*LP
Solid,
Left Hand
1/2 HOLE
CAM
Overlay panel
flush with top
of door.
3011⁄32" (77.1 cm)
Overlay panel to
be centered on
width of door.
DEEP
ML24BRF*LPBORE 7/16Glass,
Left Hand
Solid, Right Hand
INNER
DOOR
ML24BRP*LP
Holes in Solid, Left Hand
3/4 INCH
gasket
Glass, Right Hand
WOOD PANEL
MA24BRF*RP
retainer.
SECTION A-A
with Lock
Glass, Left Hand
MA24BRF*LP
Figure 12a
with Lock
MA24RAP*RP
Solid, Right Hand
with Lock
MA24RAP*LP
Solid, Left Hand
with Lock
Table D
⁄2" (13 mm) diameter drill
through door panel, from
other side (see detail
above) 13⁄16" (20.5 mm)
counter bore, 7⁄16" (11 mm)
deep.
1
PHILLIPS SCREW
ML24BRF*RP13/16 COUNTER
Glass, Right Hand
ML24BRP*RP
31/2"
(89 mm)
17
⁄32"
(13.7 mm)
Hinge side of door
!
SCALE 1 : 1
2723⁄32" (70.4 cm)
Figure 22
For comprehensive installation instructions,
please visit www.marvelrefrigeration.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement