Denon AVR-1609 Quick Start Guide

Add to my manuals
2 Pages

advertisement

Denon AVR-1609 Quick Start Guide | Manualzz
New model information
AVR-1609
AV Surround Receiver
A/V Surround Receiver featuring HD Video connectivity, that enhances
your level of entertainment enjoyment.
The AVR-1609 monitors the structural elements of sound sources and uses Audyssey Dynamic Volume to adjust volume without sacrificing
dynamic range. This A/V receiver masterfully controls a variety of media for optimum playback of high-quality audio and video content.
Features
New Features
High quality Video
• Audyssey Dynamic Volume
• HDMI (ver. 1.3a supporting Deep Color (30/36-bit), “x.v.Color”)
• Audyssey Dynamic EQ
• 1080p video pass through
• Sirius Satellite Radio ready
• Getting Started Guide for quick and easy setup
Connectivity & Future-ready Expandability
• State-of-the-art Denon Solutions for Maximizing Content Quality
Digital Media Connectivity
- Reproduce as perfect as a content producer intend to express
(Denon Circuitry and Construction for Hi-Fi Sound Quality / Compressed Audio Restorer)
- Easy to use (QUICK SELECT / Audyssey DYNAMIC EQ + DYNAMIC VOLUME)
- Connectivity (HDMI / Dock control terminal / Network ready)
• Optional Network Streaming iPod Dock (ASD-3N - wired, ASD-3W - wireless)
• Optional iPod Audio/Photo and Video Playback Dock (ASD-1R)
• Optional iPod/iPhone Audio/Photo and Video Playback Dock (ASD-11R)
Ease-of-Use
• Audyssey Dynamic Volume and Dynamic EQ
High quality Sound
• Identical quality and power for all 7 channels, 75W x 7ch
• Discrete devices for ultimate performance in each block
• New 32-bit floating point high precision DSP
• Minimum signal path design
• Direct Mechanical Ground for stable drive
• Dual power transformers
• Denon customized block capacitors
• Compressed Audio Restorer
• Audyssey MultEQ Auto setup and Room EQ
State-of-the-art Denon Solutions for
Connectivity & Future-ready Expandability
• Three Quick Select Buttons
Maximizing Content Quality
• Power amplifier assign for zone 2
• Auto setup, auto surround, auto signal detection
• Robust power source for each block, for stable supply of current
• Remote in/out
• Auto Surround Back Channels on for
noise from affecting the sound, the AVR-1609 has a dedicated
Ease-of-Use
• Auto Surround mode
CPU transformer that are separate from the audio and video
• Audyssey Dynamic Volume, for real-time volume adjustment
circuitry. The AVR-1609 is endowed with a powerful rectifier
Large changes in volume sometimes occur between docu-
• Night Mode for neighbor friendly listening
circuit with 10,000μF block capacitors and a bridge diode of
mentaries where the sound is mainly narrative and movies
• Muting level settings (Full/-40dB/-20dB)
8A capacity, surpassing typical models in this price range, to
which often contain loud sound effects. Viewers often raise
• Audio Level Memory, capable of correcting
supply stable current with negligible noise.
the volume for documentaries to hear the narrative more easily
auto-detection of supporting sources
To produce a clear, stable power circuit that prevents unwanted
• Audio Delay function (max. 6 frames or 200 msec)
different signal levels for each input device
but then turn it down again when a commercial with loud
• Volume Level Limiter, for setting maximum volume levels
• Minimum Signal Path
sound effects comes on. They do this numerous times during
• Power-ON Volume Level Memory
The "simple and straight" design concept has been thoroughly
a program of this type. Audyssey Dynamic Volume constantly
• Variable subwoofer crossover switching
implemented in the signal paths to contribute to immaculately
monitors the sound sources and adjusts the volume to the
clean audio and video playback.
optimum level for the particular source being heard without
Signal paths are as short as possible to keep signal degradation
sacrificing dynamic range.
in the audio and video circuitry to an absolute minimum.
The AVR-1609 is also equipped with Audyssey MultEQ which
measures the acoustic characteristics of the room to obtain the
• Direct Mechanical Ground
optimum acoustic effects, and Dynamic EQ which reproduces
Vibration-resistant construction has been reviewed to thoroughly
the high and low range with the optimum acoustic effect during
suppress the adverse influences of vibration on sound quality.
low volume levels. Dynamic Volume combines these two func-
The power transformers, a source of vibration, have been
tions to achieve maximum performance.
securely mounted on the highly rigid bottom chassis.
Direct mounting of cast-iron feet to the radiator in near proximity
to each other serves to suppress mutual vibration with the
power transformers and other sources of vibration.
• MultEQ Auto setup and Room EQ
-Tower type microphone for more accurate measuring
-Up to six measurement points
-High level resolution filters for satellite speakers and also subwoofer
• Compressed Audio Restorer
Input / Output Terminals:
IN
Denon’s new audio technology for MP3/WMA/AAC
compressed audio formats restores higher frequency sounds,
along with rich, deeper bass.
Main Specifications:
Power amplifier section
Preamplifier section
Rated output
*THD figures are power amp stage values.
Input sensitivity/impedance 200 mV / 47 kΩ/kohms
Front L/R
75 W + 75 W
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
S/N Ratio
98 dB (IHF-A weighted, DIRECT mode)
OUT
110 W + 110 W
Center
Surround L/R
(6 ohms, 1 kHz, THD 0.7%)
FM section
75 W
Tuning frequency range
87.5 - 107.9 MHz
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
Usable sensitivity
1.0 μV (11.2 dBf)
110 W
AM section
(6 ohms, 1 kHz, THD 0.7%)
75 W + 75 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
Tuning frequency range
520 - 1710 kHz
Usable sensitivity
18 μV
110 W + 110 W
(6 ohms, 1 kHz, THD 0.7%)
Surround Back L/R
75 W + 75 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
General
Power supply
AC 120 V, 60 Hz
Power consumption
4.4 A (Standby 0.3W)
Dimensions (W x H x D)
434 x 171 x 377 mm
17-3/32” x 6-47/64” x 14-27/32”
110 W + 110 W
(6 ohms, 1 kHz, THD 0.7%)
Weight
11.1 kg
HDMI
2
Component
2
S-Video
3
Composite
4
Analog Audio (Tuner included)
7
Analog EXT. Input
7.1ch
Digital OPTICAL
2
Digital COAXIAL
2
HDMI Monitor
1
Component Monitor
1
S-Video Monitor
1
REC
1
Composite Monitor
Others
1
REC
1
Analog Audio REC
2
Audio PRE out (Sub woofer)
1
Dock Control Port
1
Sirius Connector
1
FM Tuner Antenna
1
AM Tuner Antenna
1
Remote In/Out
1
24lbs 14.6oz
*Design and specifications are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
*DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks and
the DTS logos, Symbol and DTS 96/24 are trademarks of DTS, Inc.
*Audyssey MultEQ ® is a registered trademark of Audyssey Laboratories.
Audyssey Dynamic EQ™ is a trademark of Audyssey Laboratories. Audyssey
Dynamic Volume™ is a trademark of Audyssey Laboratories.
*“HDMI”, “HDMI logo” and “High-Definition Multimedia Interface” are
trademarks or registered trademarks of HDMI Licensing LLC.
*iPod ® is a trademark of Apple Inc., registered in the U.S. and other
countries.
*“x.v.Color” is trademark of Sony Corporation.
Denon Electronics (USA), LLC.
Denon Canada Inc.
Denon Brand Company
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500 usa.denon.com
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085 ca.denon.com
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
1743 0608 A

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement