New Built-In Model BI-36U Over-and-Under

New Built-In Model BI-36U Over-and-Under
New Built-In Model BI-36U
Over-and-Under
Over-and-under Model BI-36U offers large
refrigerated storage, plus a convenient
roll-out freezer drawer. Sub-Zero dual
refrigeration along with new air purification
and water filtration systems guard the
freshness of your food and water like
nothing before. Framed, overlay/flush inset
and stainless steel models are available.
New flush inset installation allows the unit
to sit flush with surrounding cabinetry.
Model BI-36U/S is Energy Star qualified.
Model BI-36U shown with stainless steel flush inset panels and tubular handles.
Features
Model Options
Framed, overlay/flush inset and
stainless steel design applications
BI-36U/F
BI-36U/O
BI-36U/S/TH
BI-36U/S/PH
BI-36U/S/CH
Framed
Overlay/Flush Inset
Stainless
Stainless
Stainless
Louvered
Panel
Stainless
Stainless
Stainless
Full-Length
*
Tubular
Pro
Curved
Design
Grille
Flush inset installation option allows unit
to sit flush with surrounding cabinetry
Handle
Air purification system
*Handle not included to allow for design flexibility.
Water filtration system
Dual refrigeration system
Model BI-36U/S is Energy Star qualified
with $49 annual energy usage
Flip-up grille for easy access to condenser
Evenly-distributed bright interior lighting
Door shelves are adjustable in one-inch
increments
Crisper and deli drawers form a special
low-temperature zone
Informational freshness cards inside unit
Max ice feature to increase rate of ice
production for a 24-hour period
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Flip-Up Grille
Air Purification System
Interior Features
Accessories
Refrigerator
15.9 cu ft Capacity
Air Purification System
3 Adjustable Glass Shelves
1 Stationary Glass Shelf
1 High-Humidity Drawer with Dividers
1 Storage Drawer with Dividers
2 Adjustable Door Shelves
Adjustable Dairy Compartment
Louvered, panel and stainless steel grilles
for 83", 84" and 88" finished heights
Freezer
5.2 cu ft Capacity
Water Filtration System
Full-Extension Roll-Out Freezer Drawer
Two-Tier Wire Storage Baskets
Automatic Ice Maker
Stainless steel tubular, pro or curved
handles and full-length extended handles
Stainless steel front panels for framed,
flush inset and dual flush inset applications
with stainless steel finish and handle
options
Side panels in classic stainless steel and
white
Dozen egg container with lid
Dual installation kit
90° door stop kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
subzero.com.
Built-In Model BI-36U
Installation Specifications
Standard Installation
*ANTI-TIP BRACKET MUST NOT
TOP VIEW
INTERFERE WITH WATER LINE.
REFER TO INSTALLATION
*Anti-tip bracket
must not interfere
INSTRUCTIONS FOR COMPLETE
with water line.DETAILS.
Extend water line
Overall Dimensions
6"
18" (457)*
1/2"
(13)
(152)
WATER LINE
24" (610)
OPENING
DEPTH
approximately EXTEND
36" from
back
wall.
WATER
LINE
APPROX
36" (914) FROM BACK WALL.
Dimensions in parentheses are in
millimeters unless otherwise specified.
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
SHUT-OFF
VALVE
84"
7"
(2134)
(178)
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
24" (610)
OPENING
DEPTH
E
6"
(152)
35 1/2" (902)
OPENING WIDTH
36"
24"
(914)
(610)
83 3/4"
75 1/2"
(2127)
OPENING
HEIGHT
(1918)
35 1/4"
(895)
23 7/8"
(606)
BEHIND
FRAME
LOCATE WATER SUPPLY
WITHIN SHADED AREA
37 1/4"
(946)
Unit dimensions may
vary by ± 1/8" (3).
18"
6"
(457)
(152)
3" (76)
36"
SIDE VIEW
(914)
W
FRONT VIEW
6"
18" (457)*
Specifications
Flush Inset *ANTI-TIP
Installation
BRACKET MUST NOT
TOP VIEW
1/2"
(13)
INTERFERE WITH WATER LINE.
Overall Dimensions
Door Clearance
36"W x 84"H x 24"D
Standard 37 1/4"
Flush Inset 37 3/4"
Opening Width
Flush Inset Width
35 1/2"
38"
Opening Height
Flush Inset Height
83 3/4"
Opening Depth
Flush Inset Depth
24"
26 3/16"
Electrical Requirements
Plumbing Requirements
Shipping Weight
REFER
TO not
INSTALLATION
*Anti-tip bracket
must
interfere
INSTRUCTIONS FOR COMPLETE
with water line.DETAILS.
Extend water line
approximately **ASSUMES
36" from 3back
/4" (19)wall.
PANEL
(152)
WATER LINE
26 3/16"
24" (610)
OPENING
DEPTH
THICKNESS.
**Dimensions EXTEND
based WATER
on 3/4"LINE
(19)
APPROX
36" (914) FROM BACK WALL.
panels.
1/4" (6)
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3/4" (19) PANEL
SHUT-OFF
VALVE
(665)
FLUSH INSET
DEPTH
2 3/16"
(56)**
84"
115 V AC, 60 Hz
15 amp circuit
1/ 4"
24" (610)
OPENING
DEPTH
7"
LOCATE
(178)
ELECTRICAL
WITHIN
SHADED AREA
2 3/16"
(56)**
FLUSH INSET
DEPTH
OD copper line
30–100 psi
482–515 lbs
6"
(152)
FLUSH INSET
DETAIL
26 3/16" (665)
1/4"
(6)
2 3/16"
(56)
83 3/4"
(2127)
OPENING
HEIGHT
E
24" (610)
OPENING
DEPTH
84"
75 1/2"
(1918)
(2134)
FLUSH
INSET
HEIGHT
11/4"
(32)
Installation Notes
35 1/2" (902)
OPENING WIDTH
11/4"
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
11/4"
(32)
(32)
38" (965)
FLUSH INSET WIDTH
Built-In over-and-under models with opposite
hinges can be used in a dual installation.
LOCATE WATER SUPPLY
WITHIN SHADED AREA
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
3" (76)
SIDE VIEW
18"
6"
(457)
(152)
W
FRONT VIEW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement