Allis-Chalmers | Model G | Allis Chalmers 1 - Steiner Tractor Parts

1 Allis Chalmers
Allis Chalmers farm tractors were in production from 1914 through 1985.
In 1985, Deutz acquired the Allis Chalmers brand and then sold it to AGCO
in 1990. In an effort to preserve America’s agricultural heritage, Steiner
Tractor Parts offers many restoration quality components for collectors
and enthusiasts of these machines.
View more pictures & tractor
stories in our digital book!
www.SteinerTractor.com >
Steiner Community >
Tractor Stories
Photos submitted by folks just like you!
A. "1949 Allis Chalmers G" Andy Machicek, Temple, TX
B. "The tractor Grandpa gave me when I was 16" Erik Glover, Doniphan, NE
C. "Restored 1955 Allis Chalmers WD45" Chad Grady, Seven Springs, NC
D. "AC 185 after chopping wheat stubble" Brianna Gwirtz, Shelby, OH
E. "My Great-Grandfather's AC Unstyled WC: Fully restored"
Jason Ridinger, Middletown, MD
Our complete album can be viewed at
http://www.steinertractor.com/tractor-photo-winners.html
A
B
C
D
E
2
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
A
Air cleaner parts
caps...................................................38
clamps..............................................38
filter element.................................38
hoses................................................38
oil cups.............................................38
pipe bracket...................................38
pipe grommet...............................38
Alternators, parts
alternators......................................32
bracket.............................................33
mounting kits.........................32, 33
pulleys..............................................32
Amp gauges........................................22
B
Battery boxes, parts
battery boxes..........................25, 26
bracket set......................................25
j-bolt.................................................26
lid.......................................................26
side cover........................................26
Battery cables.....................................25
Brake parts
adjusting screw.............................52
band..................................................52
drums...............................................52
pin...............................................52, 53
riveting tool...................................52
shaft..................................................52
shoe lining sets.............................52
shoes................................................52
springs...................................... 52-53
C
Camshaft parts
bearing & bushing set................10
gears.................................................10
Caps
air cleaner.......................................38
distributor.......................................27
engine..............................................13
fuel....................................................40
magneto..........................................29
oil fill / breather............................13
power steering reservoir...........48
pre cleaner......................................39
radiator............................................20
rain....................................................15
steering wheel....................... 46-47
Carburetors, parts
adjustment needle assy.............16
bushing............................................16
carburetors.....................................16
discs........................................... 16-17
elbow strainer assy......................16
floats.................................................17
gaskets.............................................17
needle float valves.......................16
nozzles.............................................16
repair kits................................. 18-19
Cast rocker arm support stands..... 9
C
Choke parts
cables...............................................16
knob..................................................16
rod.....................................................16
Cigarette lighters...............................26
Clutch, trans. parts
alignment tool..............................43
bearing............................................43
bushings..........................................44
clutch kits........................................43
dipstick............................................44
disc....................................................43
flywheel cover...............................43
fork....................................................44
inspection cover plates..............43
kits.....................................................42
main shaft drive gear..................44
pinion shaft gears........................44
pressure plates..............................43
return springs.........................43, 44
seal....................................................44
shaft..................................................44
throw out bearings...............43, 44
Crank hole casting............................36
Crankshaft, parts
bearings....................................11, 12
crankshaft.......................................10
pulleys..............................................10
seals...........................................10, 11
D
Dash light, parts
bulb...................................................34
cover.................................................34
dash light........................................34
Data book.............................................60
Decals............................................. 59-60
Distributor parts
bushing and shim kit..................27
caps...................................................27
clips...................................................27
coils...................................................27
dust cover.......................................27
gasket...............................................27
grommet.........................................28
loom holder...................................28
resistor.............................................27
rotor button...................................28
spark plug wire sets....................28
spark plugs.....................................28
tags....................................................27
terminal insulator assys.............26
tune-up kits....................................28
Drawbars, parts
bars...................................................58
bushing............................................58
drawbars.........................................58
guide assy.......................................58
lock....................................................58
repair kit................................... 58-59
spring...............................................58
yoke assy.........................................58
DVDs......................................................61
E
Electric outlet socket, parts
boot..................................................25
connector plug.............................25
socket...............................................25
Electric panels
panels...............................................25
trim....................................................25
Emblems / nameplates
clip.....................................................36
emblems.........................................36
rivet...................................................36
Engine gasket sets..........................8, 9
Engine oil cap.....................................13
Engine overhaul kits........................... 8
Exhaust pipes......................................15
Exhaust stacks....................................15
F
Fan belts................................................21
Fan blade..............................................21
Fenders........................................... 50-51
Flywheel ring gears..........................14
Fuel filters
element...........................................41
fuel filters........................................41
screen...............................................41
Fuel gauges.........................................23
Fuel lines...............................................42
Fuel tank, parts
caps...................................................40
gaskets.............................................40
tank...................................................40
webbings........................................40
Fuse holder..........................................26
G
Gauges
amp...................................................22
fuel....................................................23
oil pressure.....................................22
tachometers............................ 23-24
traction booster gauge..............22
water temperature......................23
Gear shift boots..................................46
Gear shift knobs.................................45
Gear shift lever, parts
lever..................................................44
pins....................................................44
washer and snap ring.................44
Generator parts
band cover......................................31
belt....................................................31
brackets...........................................31
cut-out assy....................................31
tags....................................................32
Governors, parts
governor..........................................19
springs.............................................19
Grille parts
mounting tabs..............................36
screens.............................................37
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
H
Hand clutch lever..............................51
Hand cranks
brackets...........................................36
levers................................................36
Headlights, parts
bezel.................................................35
bracket.............................................33
bulbs.................................................35
gaskets.............................................35
headlights................................33, 34
knobs................................................35
lens....................................................35
reflectors.........................................35
ring.............................................34, 35
rings..................................................35
terminal...........................................35
visor..................................................34
washer..............................................35
Hoods....................................................37
Hydraulic oil filter..............................53
I
Ignition parts
bushing and shim kit..................27
caps...................................................27
clips...................................................27
coils...................................................27
dust cover.......................................27
gasket...............................................27
grommet.........................................28
loom holder...................................28
resistor.............................................27
rotor button...................................28
spark plug wire sets....................28
spark plugs.....................................28
tags....................................................27
terminal insulator assys.............26
tune-up kits....................................28
K
Knobs.....................................................45
L
Light switches, parts
knobs................................................33
plate..................................................33
resistor.............................................33
switches...........................................33
M
Magnetos, parts
caps...................................................29
coils...................................................29
condensors.....................................29
gaskets.............................................29
magneto..........................................29
manual.............................................29
points...............................................29
rotors................................................29
Index continues on next page
3
Allis
Chalmers
Allis Chalmers: Alphabetical index
Allis
Chalmers
Allis Chalmers: Alphabetical index cont...
M
Manifolds, parts
bracket............................................... 6
elbows................................................ 7
gasket material............................... 7
gaskets...........................................6, 7
manifolds.......................................... 6
nuts..................................................... 6
pipe.................................................6, 7
studs................................................... 6
washer kit.......................................... 6
Manuals..........................................60, 61
Mufflers
bracket.............................................14
clamps..............................................14
mufflers.....................................14, 15
O
Oil / breather caps.............................13
Oil filters, part
base gasket....................................13
oil filters...........................................13
Oil pan drain plug
drain plug.......................................13
gaskets.............................................13
washer..............................................13
Oil pressure gauges, parts..............22
copper line kit...............................23
fittings..............................................23
oil pressure gauge.......................22
Oil pump repair kit............................14
P
Piston ring sets................................. 7-8
Power steering parts
belt....................................................48
bolt....................................................48
cap.....................................................48
couplers...........................................48
port blocks.....................................48
priority flow control valve.........48
pulley................................................48
torque generator..........................48
Pre-cleaner parts
base...................................................39
bowls................................................39
caps assys........................................39
clip/springs kit..............................39
covers...............................................39
pre-screener...................................39
screen...............................................39
PTO parts
knob..................................................54
over-running clutches................54
seals..................................................54
shield................................................54
Pushrods................................................. 9
R
Radiator, parts
caps...................................................20
clamps..............................................20
drain plug.......................................19
gaskets.............................................20
4
R
Radiator, parts cont...
hoses................................................20
mounting pad...............................19
pipes.................................................20
radiators..........................................19
Raincaps................................................15
Rear axle, parts
bearing............................................53
gasket........................................53, 54
rear axle...........................................53
seals...........................................53, 54
Rims, rear and front
bearing kits....................................55
bolts....................................54, 56, 57
inner tube valves..........................56
nuts............................................54, 56
rear rim clamps.............................56
rims...................................................57
seals..................................................55
stops.................................................57
washer..............................................56
wheels..............................................55
S
Seats, parts
assy....................................................50
backs.................................................49
bolt....................................................50
bumper............................................49
bushings...................................49, 50
coil.....................................................50
cushions...................................49, 50
hardware kit...................................49
pads........................................... 49-50
pan....................................................49
pan repair kit.................................49
pivot support rod.........................50
shock absorbers...........................50
support / spring............................49
Sediment bowl assys., parts
bail assys.........................................41
gaskets.............................................41
glass bowls.....................................41
screens.............................................41
sediment bowl assys............40, 41
Shroud assys........................................51
Side panels...........................................37
Sleeve & piston kit............................... 8
Sleeve sealing o-rings........................ 8
Starters, parts
band cover......................................30
drives................................................30
housings..........................................30
keys...................................................31
levers................................................30
plate..................................................31
repair studs....................................29
rod.....................................................29
spring...............................................30
starter solenoids...........................29
switches.................................... 29-31
tags....................................................30
Steering bearings..............................47
S
Steering joint repair kits..................47
Steering parts
brackets...........................................48
bushings..........................................48
shaft..................................................47
shaft tubes......................................47
Steering wheels, parts
bushing............................................46
center caps / emblems........46, 47
nuts............................................46, 47
spinner.............................................47
steering wheels..................... 46-47
Steps......................................................54
T
Tachometers
cables........................................23, 24
drive adaptor.................................24
drive assy........................................24
drive gear........................................24
drive gear & shaft.........................24
gasket kit.........................................24
nipple...............................................24
tachometer..............................23, 24
Tail lights, parts
bulbs.................................................35
gaskets.............................................35
knobs................................................35
lens....................................................35
reflectors.........................................35
ring....................................................35
rings..................................................35
switches...........................................35
tail lights...................................34, 35
terminal...........................................35
Thermostats, parts
covers...............................................21
gasket...............................................21
thermostats....................................21
Three point hitch, parts
brackets...........................................59
bushing............................................58
conversions....................................59
drawbars.........................................58
guide assy.......................................58
lock....................................................58
pins....................................................58
snap coupler repair kit........58, 59
snap coupler spring....................58
stabilizer bar..................................60
Throttle parts
bracket.............................................42
bushing............................................42
knob..................................................42
lever slide / block.........................42
levers................................................42
quadrant.........................................42
rod.....................................................42
springs.............................................42
Tie rod, parts
tie rod...............................................49
tie rod boots..................................49
tie rod ends....................................48
T
Tires, tubes
nut.....................................................56
tires...................................................56
tubes.................................................56
valves................................................56
Toolboxes.............................................51
Top-links, parts
bushing............................................58
pins....................................................58
top links...........................................58
Traction booster gauge...................22
U
Umbrellas.............................................59
V
Valve cover gaskets............................. 9
Valve grind gasket sets...................... 9
Valve train kits....................................10
Video......................................................61
Voltage regulators
conversion kit................................32
regulators........................................32
W
Water pumps................................20, 21
Water temperature gauges............23
Weight, front
anchors............................................58
bracket set......................................58
rods...................................................58
weight..............................................58
Weights, wheel
j-hook...............................................57
weight..............................................57
Wheels, front and rear
bearing kits....................................55
bolts...........................................54, 56
inner tube valves..........................56
nuts............................................54, 56
rear rim clamps.............................56
rims...................................................57
seals..................................................55
stops.................................................57
washer..............................................56
wheels..............................................55
Y
Yard spinner........................................59
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
B, C, CA, G
serial number
location
WD, WD45 serial
number location
D10, D12, D14, D15, D17, D19, D21,
170, 175, 180, 190, 200, 210, 220
serial number location
1955.....................190993
1956.....................217992
1957.....................230295
WF serial no. located
on rear of differential
housing above op.
platform.
170, 175, 180, 185,
190, 190XT, 210, 220
serial no. located
at front of torque
housing flange.
Model 170
1968..........................2721
1969..........................5374
1970..........................6369
1971..........................6988
1972..........................7797
1973..........................8821
Model 175
1970..........................1001
1971..........................1477
1972..........................1624
1973..........................1740
1974..........................2153
1975..........................3255
Model 180
1968..........................2682
1969..........................6094
1970..........................9235
1971....................... 10561
1972....................... 11729
1973....................... 12447
Model 185
1970..........................1001
1971..........................1952
1972..........................2935
1973..........................3763
1974..........................4961
1975..........................6542
1975..........................9250
Model 210
1970..........................1001
1971..........................1107
1972..........................2082
1973..........................2469
Model 220
1969..........................1004
1970..........................1938
1971..........................2451
1972..........................2626
1973..........................2860
7000 serial no.
located on RH side of
differential housing.
Model 7000
1975..........................1001
7030, 7040, 7050,
7060, 7080 serial no.
located above PTO
guard.
Model 7030
1973..........................1001
1974..........................2595
Model 7040
1975..........................1303
Model 7050
1973..........................1001
1974..........................1688
Model 190, 190XT
1964..........................1001
1965..........................2485
1966..........................8219
1967....................... 13273
1968....................... 19262
1969....................... 23234
1970....................... 25901
1971....................... 29136
1972....................... 31057
1973....................... 31118
Model 7060
1975..........................1299
Model 200
1972..........................1001
1973..........................3344
1974..........................6294
Model B
1937................................. 1
1938...............................97
1939....................... 11800
Model 7080
1975..........................1007
B, C, CA, G, U
serial no. located on
top of transmission
case, to the rear of
shift lever.
1940....................... 33502
1941....................... 49721
1942....................... 56872
1943....................... 64501
1944....................... 65502
1945....................... 70210
1946....................... 72265
1947....................... 73370
1948....................... 80056
1949....................... 92295
1950.....................102393
1951.....................114527
1952.....................118674
1953.....................122310
1954.....................124201
1955.....................124711
1956.....................126497
1957.....................127186
Model IB
1946..........................1001
1947..........................1003
1948..........................1010
1949..........................1282
1950..........................1556
1951..........................1879
1952..........................2219
1953...............2570-2847
1954..........................3068
Model C
1940................................. 1
1941............................ 112
1942....................... 12389
1943....................... 18782
1944....................... 23908
1945....................... 30695
1946....................... 36378
1947....................... 39168
1948....................... 51515
1949....................... 68281
Model CA
1950...............................14
1951............................ 322
1952....................... 10539
1953....................... 22181
1954....................... 31424
1955....................... 32907
1956....................... 37203
1957....................... 38618
1958....................... 38977
Model G
1948................................. 6
1949....................... 10961
1950....................... 23180
1951....................... 24006
1952....................... 25269
1953....................... 26497
1954....................... 28036
1955....................... 29036
Model RC
1939................................. 4
1940..........................4392
1941..........................5417
WC serial no. located
on rear of differential
housing just above
operator platform.
Model WC
1933................................. 1
1934...............................29
1935..........................3127
1936....................... 13870
1937....................... 31784
1938....................... 60790
1939....................... 75216
1940....................... 91534
1941.....................103517
1942.....................114534
1943.....................123171
1944.....................127642
1945.....................134624
1946.....................148091
1947.....................152845
1948.....................170174
WD, WD45 serial no.
is located on top of
left differential brake
housing.
Model WD
1948................................. 7
1949..........................9250
1950....................... 35445
1951....................... 72328
1952.....................105182
1953.....................131243
Model WD45
1953.....................146607
1954.....................160386
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Model WF
1937................................. 4
1938............................ 389
1939..........................1336
1940..........................1892
1941..........................2300
1942..........................2704
1944..........................3004
1945..........................3195
1946..........................3510
1947..........................3748
1948..........................4111
1949..........................5500
1950..........................7318
1951..........................8316
D-10, D-12, D-14,
D-15, D-17, D-19,
D-21 serial no.
located at front of
torque housing on
left side.
Model D-10
1959..........................1001
1960..........................1950
1961..........................2801
1962..........................4522
1963..........................6801
1964..........................7675
1965..........................9204
1966..........................9486
1967..........................9795
1968..........................9979
Allis
Chalmers
Allis Chalmers: Beginning serial numbers
1961..........................1900
1962..........................6470
1963....................... 13001
1964....................... 16928
1965....................... 19681
1966....................... 21375
1967....................... 23734
1968....................... 25127
Model D-17
1957..........................1001
1958..........................4300
1959....................... 16500
1960....................... 28200
1961....................... 33100
1962....................... 38070
1963....................... 65001
1964....................... 70611
1965....................... 77090
1966....................... 80533
1967....................... 86061
D-19 serial no.
located on rear end
housing behind seat.
Model D-19
1961..........................1001
1962..........................7331
1963....................... 12001
1964....................... 16266
Model D-21
1963..........................1001
1964..........................1417
1965..........................2079
1966..........................2408
1967..........................2863
1968..........................3777
1969..........................4498
Model D-12
1959..........................1001
1960..........................1950
1961..........................2801
1962..........................3638
1963..........................5501
1964..........................6012
1965..........................9192
1966..........................9508
1967..........................9830
1968..........................9979
Model D-14
1957..........................1001
1958..........................9400
1959....................... 14900
1960....................... 21800
Model D-15
1960..........................1001
5
Allis
Chalmers
Manifolds, parts
Engine parts
Order #
$98.50
ACS001GK
$7.95
ACS002B
$99.00
ACS002GK
$9.25
ACS085
$224.50
ABC2290
ACS004
ACS004GK
ACS217
ACS1762
ACS156
6
Price
ACS001
$0.95
$157.90
$16.30
$4.95
$4.95
Manifolds, parts cont...
Description / Application
Order #
Manifold
Fits: G
Replaces: 70800333
NOTE: Intake & exhaust ports are in
perfect alignment! Made from ductile
iron.
Gasket Set (For ACS001)
Replaces: 70800299 (manifold), 70800304
(carburetor)
Price
$169.95 Manifold fits: D14, (D15 up to SN: 9001
ACS003GK
$9.75
ACS004
$157.90 Manifold w/out Threaded Exhaust
ACS081
$189.60 Manifold w/ Threaded Exhaust
ACS1875
$9.95
ACS004GK
$16.30
gas); Will fit D15 gas SN: 9001 & up,
but customer must make an adaptor for
muffler; I-60, I-600
Replaces: 70234143
Gasket Set (For ACS002B)
Replaces: 70226096
Brass Manifold Nut fits: B, C, CA, D10
thru D15, RC, WC, WD, WD45, WF gas,
LP, Replaces: 70239400
(3/8" - 16" NC)
NOTE: Sold individually.
Manifold & Bracket
Fits: D17 up to SN: 32000 gas w/out
threaded exhaust
Replaces: 70224782, 70229416
Gasket Set (For ACS085, ACS004)
Replaces: 70299958
NOTE: Elbow gaskets were never
used.
Manifold Stud (For ACS085, ACS004)
Replaces: 70203072
(4-1/2" coarse both ends, 3/8" dia.)
USA made NOTE: 6 studs used per
engine; Sold individually.
Bracket (For Muffler)
Fits: Early D17 gas, Styled WC, WD,
WD45; Will also fit the B, C, CA, RC if
customer trims approximately 1" off the
length & redrill one hole if needed
Fits: D17 series III, IV SN: 32001 & up;
170, 175 gas (All w/ threaded exhaust)
Replaces: 70257485
NOTE: Will fit Early D17 when
threaded pipe desired.
Exhaust Pipe
Fits: D17 SN: 32001 & up gas, LP, 170
gas, 175 gas, Replaces: 70234541
(1-1/2" pipe thread x 4" length)
USA made
Gasket Set (For ACS081)
FDS1721
$7.95
ABC1878
$1.75
Manifold Nut & Lockwasher
Fits: D15 diesel, D17, D19 gas, diesel,
170, 175 gas, Replaces: 70237091
(7/16" - 20 NF) NOTE: Brass nut,
yellow zinc lockwasher. 6 or more used
per tractor, Sold individually.
ACS1872
$5.95
Manifold Stud fits the following gas,
LP: D17, 170, 175, Combines w/ 226 gas
engine: E, E3, Replaces: 70229339
(7/16"-14 NC x 7/16"-20 NF x 4-3/4"
length) NOTE: 6 used per engine;
Sold individually.
ACS005
$260.00 Manifold
Manifold Nut & Washer Kit
Fits: D17 gas, LP, (170, 175 gas)
Replaces: 70237091
(7/16"-20 NF)
Fits: D19 gas, Combines: A, C, F w/
6-cyl. 230, 262" Allis Chalmers engine,
Replaces: 74513468, 74516769
$269.95 Manifold
Fits: D10, D12, I40, I400
Replaces: 70233235
(17-3/8" c.c. outer stud holes, 2-1/4" c.c.
carb mount, 1.000" dia. center venturi
hole)
Gasket (For ACS156, ACS003)
Replaces: 70234140
USA made
& Bracket
Fits: D17 up to SN: 32000 gas w/out
threaded exhaust
Replaces: 70224782, 70229416
Manifold
Fits: B, IB, C, CA, RC
Replaces: AM2919, 70225323
Manifold & Exhaust Elbow
Fits: WC, WF up to engine SN: 106509
w/ 45º side exhaust out of left side of
hood, Replaces: 70203178, 70229940
Description / Application
ACS003
COS010GK
$19.95
Manifold Gasket (For ACS005)
Fits: D19 gas USA made
NOTE: When customer wants a 1-piece
gasket instead of individual gaskets.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ACS005GK
$17.80
Gasket materials - USA made cont...
Description / Application
Price
$15.95
ABC1846
$22.95
Gasket (For ACS005)
Replaces: 74512715
IHS003EXP
$12.50
Exhaust Pipe (For ACS005)
Replaces: 74513471
(2" pipe threads, 2-1/4" O.D.,
10-3/8" or longer)
ACS307
Description / Application
Gasket Paper
For making general purpose gaskets
(0.0160" thick x 18" wide x 98" long)
NOTE: Do not use for high
temperature applications.
Engine parts
Order #
ABC1844
Allis
Chalmers
Manifolds, parts cont...
Gasket Paper
For making general purpose gaskets
(0.0275" thick x 20" wide x 108" long)
NOTE: Do not use for high
temperature applications.
$88.50
Exhaust Turbo Elbow
Fits: D19, D21, 210, 220, 7000, 7010, 7020
Replaces: 70253661
Piston ring sets - USA made (unless noted)
Measure old rings before ordering. Do not order by tractor
model only. To ensure you order the correct rings, you will need
the following information:
ACS088
1
$79.95
Turbo Elbow
Fits: 190, 200; Combines: GL, L, L2, M,
M2, Replaces: 70244418
ABC2511
$3.95
Turbocharger to Exhaust Manifold
Mounting Gasket fits: D19 thru 8550
Replaces: 74025781 USA made
NOTE: See website for full
applications.
Bore size
2
Order #
ABC1830
ABC1835
Price
$17.90
$13.95
$10.95
Cork / Rubber Rollpack Gasket
Material
For making general purpose gaskets
(1/16" thick x 12" wide x 24" long)
NOTE: Do not use for high
temperature applications.
Cork / Rubber Rollpack Gasket
Material
For making general purpose gaskets
(3/32" thick x 12" wide x 24" long)
NOTE: Do not use for high
temperature applications.
Quantity of each ring thickness
per piston.
price and availability of other sizes.
Order #
Price
Application
Fits: Some early B (w/ Waukesha
Flathead engine) (If 3 ring piston,
discard 1 compression ring) & early B
(w/ AC engine) 4-cyl.
ABC2166
$69.95
ABC2166: 3-1/4" bore, (3) 0.125"
compression rings, (1) 0.187" oil ring
Fits: Some B, C, CA, IB, RC, (D10, D12
up to SN: 3500)
ABC2070 Replaces: 70230093, 79017908
Description / Application
Exhaust Manifold Gasket Material
Fits: Allis Chalmers models
(1/16" thick x 12" wide x 28-1/2" long)
NOTE: Perforated steel core.
3
Piston rings can not be returned if opened. Call or email for
Gasket materials - USA made
ABC448
Thickness of
each ring
ABC2070
$74.95
ABC2070: 3-3/8" standard bore, (3) 0.125"
compression rings, (1) 0.187" oil ring
ABC2072
$121.75
ABC2072: 3-7/16" bore, (3) 0.093"
compression rings, (2) 0.187" oil rings
NOTE: On some engines, discard 1 oil ring
per cylinder.
ABC2086
$100.95
ABC2086: 3-7/16" bore, (3) 0.125"
compression rings, (1) 0.187" oil ring
Fits: 'Some' D15 SN: 9001 & up, H3 SN:
6960 & up, I60, I600 4-cyl. gas, LP w/
G160 engine, Replaces: 70248293
ABC2084
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$94.50
ABC2084: 3-5/8" bore, (3) 0.093"
compression rings, (1) 0.187" oil ring
Piston rings sets continue on next page
7
Allis
Chalmers
Piston ring sets - USA made (unless noted) cont...
Sleeve & piston kits
Measure old rings before ordering. Do not order by tractor
NOTE: Includes sleeves, pistons, piston
ring sets, piston pins, pin retainers,
model only. To ensure you order the correct rings, you will need
sleeve sealing rings. Most other sets
the following information:
Engine parts
1
Bore size
2
Thickness of
each ring
available by special order.
3
Quantity of each ring thickness per
piston.
Piston rings can not be returned if opened. Call or email for
price and availability of other sizes.
Order #
Price
Order #
Price
$328.50
NEW! Fit: B, C, CA, IB, RC
w/ 125" engine, Replaces: 70282941
(3.4375" overbore, flat top aluminum
pistons)
ACS3052
$418.50
NEW! Fits: WC, WD, WF 4-cyl.
w/ 201" gas engines
Replaces: 70283616 (4.125" overbore,
aluminum flat top pistons)
ACS3056
$399.95
NEW! Fits: WD45, D17, 170, 175 gas
Replaces: 70284361
(4.125" overbore, aluminum concave
head pistons)
Application
Fits: Some D17, WC, WD, WD45, 170,
175 gas, LP
ABC2076 Replaces: 70230091
ABC2076
$109.70
ABC2076: 4" bore, (3) 0.125" compression
rings, (1) 0.250" oil ring
ABC2078
$128.95
ABC2078: 4-1/8" bore, (2) 0.093" & (1) 0.125"
ABC2190
$118.50
ABC2190: 4" bore, (3) 0.125" compression
rings, (1) 0.187" oil ring
ABC2082
$79.50
ABC2082: 4" bore, (3) 0.093" compression
rings, (1) 0.250" oil ring
NOTE: Not USA made
ABC2090
$78.50
ABC2090: 4-1/8" bore, (3) 0.093"
compression rings, (1) 0.250" oil ring
compression rings, (1) 0.250" oil ring
Sleeve sealing o-rings
- USA made
NOTE: Sold as one pair for one cylinder.
Order #
Fits: G 4-cyl.
ABC2065 Replaces: 70800325
ABC2063 Replaces: 70800507
ACS2065
$82.50
ACS2065: 2.375" bore, (2) 0.093"
compression rings, (1) 0.187" oil ring
ACS2063
$82.50
ACS2063: 0.020" overbore, 2.395" bore, (2)
0.093" compression rings, (1) 0.187" oil ring
Price
$184.95
Application
ACS2111
$4.95
Fits: B, C, CA, IB, RC (All w/ 116" &
125" engines), Replaces: 70206666,
70227501 (0.125" thick)
ACS2109
$4.95
Fits: D10, D12, D14, (D15 up to SN:
9000), I40, (H3 up to SN: 6959) gas, LP
(All w/ G138 & G149 engines)
Replaces: 70227563 (0.135" thick)
ACS2113
$6.95
Fits: WC SN: 65528 and up, WD, WD45,
WF, D17, 170, 175 gas, LP
Replaces: 70207436, 70227500
(0.125" thick)
Fits: WD45 diesel 6-cyl.
ABC2178
Application
ACS3050
Engine gasket sets
ABC2178: 3-1/2" bore, (3) 0.125"
compression rings, (1) 0.250" oil ring
NOTE: Includes all gaskets & crankshaft seals for major engine
overhaul.
Order #
Price
ABC1319
$82.90
Engine overhaul kits
Application
Fits: G w/ N-62 Continental engine
Replaces: 70800336
Inframe or out of frame kits are available
by special order for G, B, C, CA, RC, WC,
WD, WD45, D10 thru 8070. For price and
availability call, or visit Special Order Parts
under Shop Online on our website.
ACS1322
$69.00
Fits: B, IB, C, CA, RC
Replaces: 70277278
8
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Engine gasket sets cont...
$111.45
Application
Fits: D10, D12, D14, (D15 up to SN:
9000), I40, I400, (H3 up to SN: 6959),
RT40 (All w/ gas, LP w/ 138, 149"
engines), Replaces: 70255326
Fits: WC & WF both w/ engine SN:
72459 & up (15 stud head); WD, WD45,
D17, 170, 175 gas, LP
Replaces: 70277290
Order #
Price
Application
ABC1661
$16.50
Fits: D15, HD3 diesel
Replaces: 4513480, 74501034
USA made
ACS315
$14.95
Fits: WC, WD, WD45, WF, D17, 170, 175
gas, LP (All w/ 201, 226" engines)
Replaces: 70255297
ABC2589
$27.50
Fits: D17 diesel, D19 gas, diesel, WD45
diesel, Replaces: 74513482, 74516343
USA made
Engine parts
ACS1320
Price
$106.50
Allis
Chalmers
Order #
ACS1949
Valve cover gaskets cont...
Pushrods, part
NOTE: Pushrods are sold individually.
Valve grind gasket sets
NOTE: Includes all gaskets required when replacing the cylinder
head.
Order #
Price
ACS025VGK
$49.95
ACS297
$54.95
ACS291
ACS1658
ABC2827
$65.95
$42.75
$32.50
Application
Fits: G w/ N-62 Continental engine
Replaces: 70800258, 70800295, 70800297,
70800299
Fits: B, IB, C, CA, RC (All w/ 116 c.i. or
125 c.i. gas engines up to 3.625" bore)
Replaces: 70224768
Fits: WC, WF w/ engine SN: 72459 &
up w/ 15 stud head, WD, WD45, D17,
170, 175 gas, LP (All w/ 201, 226" gas
engines), Replaces: 70277286
USA made
Fits: D10, D12, D14 (D15 up to SN:
9000), I40, I400, (H3 up to SN: 6959)
RT40 gas, LP (All w/ 138, 149" engine)
Replaces: 70277264
USA made
NEW! Fits: 160, 6040 w/ Perkins 3-cyl.
AD-3152 diesel
Replaces: 72080298
Order #
Price
ACS2405
$22.50
Application
Pushrod fits: B, C, CA, IB, RC; Power
Units: B125, 60H; Loader: TL6; Combines:
60, 66, Replaces: 70207426
(9.828" length, 0.280" dia.) USA made
ACS2410
$22.50
Pushrod fits: D10, D12, D14, D15, H3, I40,
I60, I400, I600 (All w/ 138, 149, 160" gas,
LP), Replaces: 70227633
(9.233" o/a length, 0.270" O.D.) USA made
ACS2415
$22.50
Pushrod fits: D17, WC, WD, WD45, WF,
170, 175 gas, LP (All w/ 201, 226" engines)
Replaces: 70203018 (11.017" o/a length,
0.314" O.D.) USA made
ACS2055
$7.15
Pushrod Side Cover Gasket
Fits: WC, WD, WF, W Speed Patrol,
201" Power Units
Replaces: 70218604
Cast rocker arm support stands
NOTE: 4 used per tractor; Sold individually
Order #
Price
ACS1196
$28.50
Application
Fits: D10, D12, D14, D15, H3, I40, I60, I400,
I600 gas, LP (All w/ G138, G149, G160"
engines), Replaces: 70227627, 70239791
Valve cover gaskets
ACS1161
Order #
Price
Application
ACS313
$14.95
Fits: B, IB, C, CA, RC
Replaces: 70206892
ACS1187
$16.25
Fits: D10, D12, D14, D15, I-40, I-60,
I-400, I-600 gas, LP
Replaces: 70255296 USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$28.50
Fits: (WD, WF w/ engine SN: 253200 253489), WD45, D17, 170, 175 gas, LP
(All w/ 201, 226" engines)
Replaces: 70224727, 70225019
(1.945" tall, 0.865" hole dia.)
NOTE: Measure prior to ordering.
9
Allis
Chalmers
Engine parts
Valve train kits
Crankshaft, parts cont...
Order #
Price
Application
ACS2129
$115.00
Fits: B, IB, C, CA, D10, D12, D14, D15 (up
to SN: 9000), H3, I40, I400, RC (All gas, LP)
Replaces: (4) 70234829 intake valves,
(8) 70206879 valve springs, (4) 70228589
exhaust valves, (8) 70234824 valve guide,
(16) 70206880 valve keepers
NOTE: Does not include retainers.
Fits engine SN: CE161057 & up, to use
on earlier engines customer must use
exhaust valve roto caps #70224926 (not
supplied from STP, Inc.).
ACS323
Price
ACS349
$74.95
Camshaft parts
Price
ACS2515 $148.50
Description / Application
NEW! Camshaft Gear fits: WD45 SN:
48556 & up, D17, 170, 175 gas, LP
Replaces: 70227038, 227038, AM4175-1
(1.623" I.D. press on style)
NOTE: 54 teeth. See website for
additional applications.
ACS2757 $30.95
NEW! 3-piece Camshaft Bearing /
Bushing Set fits: B, IB, C, CA, RC
(All w/ 116, 125" engines)
Replaces: 70209130
USA made
ACS2761 $32.95
NEW! 3-piece Camshaft Bearing /
Bushing Set fits: D17 SN: 19978 & up, 170,
175 gas, LP; Serviceable for D17 up to SN:
19978, WC, WD, WD45 WF gas, LP
Replaces: 70229953
USA made
Order #
ACS2631
Price
$38.50
ACS069
$185.50
ACS154
$78.95
ABC1996
$9.95
Front Crankshaft Oil Seal
Fits: D10, D12, D14, D15, H3, WC, WD,
WD45, WF, I40, I60, I400, I600 gas, LP
Replaces: 70226620, 70275814
(2.000" O.D., 1.500" I.D., 0.250" wide)
NOTE: WC, WD, WD45, WF w/ engines
up to SN: 269166 can not reuse seal
retainer 224929 as this seal is wider.
ABC2263
$17.95
Front Crankshaft Seal
Fits: G
Replaces: 70800223, 70272367
(0.465" wide, 2.722" O.D.)
USA made
IHS1307
$7.95
Front Crankshaft Seal
Fits the following diesels: WD45, D15, D17,
D19; Also fits D19 gas
Replaces: 74513621
(1.875" I.D., 2.627" O.D., .312" width)
ACS2829
$14.50
NEW! Rear Crankshaft Seal
Fits: B, C, CA, IB, RC using 206847 retainer
Replaces: 70225805 (3.375" I.D., 3.955"
O.D., 0.270" width) USA made
NOTE: Original felt style.
ABC2000
$19.95
Rear Crankshaft Seal
Fits: D10, D12, D14, D15, H3, I40, I400, I60
I600 gas, LP
Replaces: 70227572
(3.375" I.D., 3.955" O.D., .375" width)
Description / Application
$399.00 Crankshaft fits: D10, D12, D14, D15 gas,
H3, I-40, I-60, I-400, I-600
Replaces: Casting #227550
NOTE: For bearings see ACS1954,
ACS1952.
$98.50
NEW! Crankshaft Gear fits: 170, 175, D17
gas; WD45 gas w/ engine SN: 45-11050 &
up, Replaces: 70230217
10
Crankshaft Pulley fits: CA, (Early D10 up
to SN: 3500), D12 up to SN: 3000, D14;
Serviceable for B, C, IB but does not have
provision for hand crank
Replaces: 70236741, AM4529
(5" pulley dia., 5/8" belt width)
NOTE: Set screw NOT included.
ACS089
Crankshaft, parts
ACS073
Description / Application
Crankshaft Pulley
Fits: G, Replaces: 70800220
(5-3/16" O.D.)
$156.65
Fits: G w/ N-62 Continental engine
NOTE: Includes NEW valves, guides,
springs, locks & retainers.
Order #
Order #
Double groove power steering
w/ cone-shaped allen screw
Fits: WD, WD45 w/ & w/out power
steering, Replaces: 70227395
NOTE: Includes set screw.
Crankshaft Pulley fits: Late D10 SN: 3501
& up, D12 SN: 3001 & up, D15, I60, I500,
I600, Replaces: 70235043, AM4761
(5-1/16" pulley dia., 3/8" belt width)
NOTE: Includes set screw.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Crankshaft, parts cont...
Price
ACS2037
$8.95
Description / Application
Rear Crankshaft Seal
Fits: G w/ N62 Continental engine
Replaces: 70800225
(3.375" I.D., 4.381" O.D., .500" width)
Order #
ACS2388
Price
$9.95
Description / Application
2-Piece Rear Crankshaft Main Seal
Fits: D17, 170, 175 gas, LP
Replaces: 70229180, 70241294
USA made
2-Piece Rear Crankshaft Main Seal
Fits: W, WC, WD, WF, WD45 gas, LP
Replaces: 70224945, 70227120
USA made
Will fit this
style Rod/Cap
Will NOT fit this
style Rod/Cap
Horizontal spilt cap
Angle split cap
Engine parts
$9.95
Allis
Chalmers
Order #
ABC2056
Crankshaft, parts cont...
Crankshaft bearings
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order #
Price
Description
Applications
Replacement number(s)
The following fit Some G w/ N62 Continental NOTE: Check rod cap style before ordering, see diagram. For bearings using
angle split rods / caps, call for price & availability. Measure before ordering, no returns if package has been opened.
ACS2872
$24.50
NEW! Standard Connecting Rod Bearing (For (1.500") standard rod journal & horizontal 70800499
split rod caps) USA made
ACS2874
$24.50
NEW! Connecting Rod Bearing (For 0.010" undersize (1.490") rod journal & horizontal
split rod caps)
ACS2876
$24.50
NEW! Connecting Rod Bearing (For 0.020" undersize (1.480") rod journal & horizontal
split rod caps)
ACS2878
$24.50
NEW! Connecting Rod Bearing (For 0.030" undersize (1.470") rod journal & horizontal
split rod caps)
ACS2880
$26.50
NEW! Connecting Rod Bearing (For 0.060" undersize (1.440") rod journal & horizontal
split rod caps)
ACS250
$98.50
Main Bearing Set (Set of 4 - 2 bearings) (2.000" standard size) USA made
NOTE: Thrust washers NOT included.
ACS2882
$98.50
NEW! Main Bearing Set w/ Thrust Washers (For 0.010" undersize (1.990") main journal)
ACS2884
$98.50
NEW! Main Bearing Set w/ Thrust Washers (For 0.020" undersize (1.980") main journal)
ACS2886
$98.50
NEW! Main Bearing Set w/ Thrust Washers (For 0.030" undersize (1.970") main journal)
70800498
The following fit B SN: 101 & up, C, CA, IB, RC
ACS2481
$18.75
Standard Connecting Rod Bearing(For 1.937" standard rod journal) USA made
NOTE: 4 used per engine.
70223629
ACS2483
$18.75
Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA made
70223639
ACS2524
$18.75
Connecting Rod Bearing (For 0.020" (1.917") under size rod journal) USA made
The following fit B, C, CA, IB, RC, B125 Power Units NOTE: Priced & sold as set for engine.
ACS2763
$104.50
NEW! Main Bearing Set (For 2.250" standard main journal) USA made
ACS2766
$104.50
NEW! Main Bearing Set (For 0.010" (2.240") undersize main journal size) USA made
ACS2768
$104.50
NEW! Main Bearing Set (For 0.020" (2.230") undersize main journal size) USA made
70206962, 70206961
The following fit D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 4-cyl. 138, 149, 160" gas, LP)
ACS1952
$69.95
Standard Connecting Rod Bearings (Set of 4) (For 1.937" standard rod journal)
USA made
ACS2485
$17.15
Connecting Rod Bearing (For 0.010" (1.927") undersize rod journal) USA made
70228486, 70237802
Crankshaft bearings continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
11
Allis
Chalmers
Crankshaft bearings cont...
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order #
Price
Description
Applications
Replacement number(s)
Engine parts
The following fit D10, D12, D14, D15, H3, I40, I60, I400, I600 (All w/ 4-cyl. 138, 149, 160" gas, LP) cont...
ACS2488
$17.15
Connecting Rod Bearing (For 0.020" (1.917") undersize rod journal) USA made
ACS1954
$186.50
Main Bearing Set (For 2.749" standard main journal) USA made
ACS2776
$149.50
NEW! Main Bearing Set (For 0.010" (2.739") undersize main journal size)
ACS2778
$149.50
NEW! Main Bearing Set (For 0.020" (2.729") undersize main journal size) USA made
70237651, 70237652,
70237830, 70237831
The following fit D17, (WC w/ engine SN: 13655 & up), WD, WD45, 170, 175 (All gas, LP)
ACS2490
$13.25
Standard Connecting Rod Bearing (For 2.375" standard rod journal) USA made
ACS2493
$13.25
Connecting Rod Bearing (For 0.010" (2.365" undersize rod journal) USA made
ACS2562
$13.25
Connecting Rod Bearing (For 0.020" (2.365") undersize rod journal) USA made
70231125
70223625
The following fit WC, WD, WD45, WF (All gas, LP w/ 201 & early 226 engines) (2.436" front & 2.477" center & rear main
standard journal size)
ACS2770
$117.75
NEW! Main Bearing Set (For standard main journal size) USA made
ACS2772
$117.75
NEW! Main Bearing Set (For 0.010" undersize main journal) USA made
ACS2774
$117.75
NEW! Main Bearing Set (For 0.020" undersize main journal) USA made
70228620
The following fit D17, 170, 175 gas, LP w/ crankshaft #229022 w/ center main thrust bearing
ACS2780
$89.95
NEW! Main Bearing Set (For (3.000") standard main journal size) USA made
ACS2782
$89.95
NEW! Main Bearing Set (For 0.010" (2.990") undersize main journal size) USA made
ACS2784
$89.95
NEW! Main Bearing Set (For 0.020" (2.980") undersize main journal size) USA made
241103, 234177,
70241103, 70234177
The following fit D15 diesel, D17 diesel, D19 gas, diesel, WD45 diesel (All w/ standard 1.998" rod journal)
ABC2495
$15.95
Standard Connecting Rod Bearing (For Standard 1.998" rod journal) USA made
74517331
ABC2498
$15.95
Connecting Rod Bearing (For 0.010" (1.988") undersize rod journal) USA made
NOTE: See website for additional applications.
74514864
The following fit I60, 6040 w/ Perkins 3-cyl. 144", 152" gas, diesel
NOTE: See website for additional applications.
ABC2888
$14.95
NEW! Standard Connecting Rod Bearings 3-cyl. set (For 2.249" standard rod journal)
72080082
ABC2890
$12.95
NEW! Connecting Rod Bearings 3-cyl. set (For 0.010" (2.239") undersize rod journal)
72080083
ABC2892
$13.75
NEW! Connecting Rod Bearings 3-cyl. set (For 0.020" (2.229") undersize rod journal)
72080084
ABC2894
$12.50
NEW! Connecting Rod Bearings 3-cyl. set (For 0.030" (2.219") undersize rod journal)
72080085
ABC2898
$19.95
NEW! Main Bearing Set (For 2.749" standard main journal)
72080078
ABC2900
$19.95
NEW! Main Bearing Set (For 0.010" (2.739") main journal size)
72080079
ABC2902
$19.95
NEW! Main Bearing Set (For 0.020" (2.729") main journal size)
72080080
ABC2904
$19.95
NEW! Main Bearing Set (For 0.030" (2.719") main journal size)
72080081
ABC2811
$7.95
NEW! 4-piece Thrust Washer Set (Standard (0.122") thick)
72080086, 72080088
ABC2813
$9.95
NEW! 4-piece Thrust Washer Set (Oversize (0.129") thick)
72080087, 72080089
12
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
IHS338
Oil pan drain plug, gaskets cont...
Price
$9.95
ACS178
(Without
Clip)
IHS406
(With Clip)
$38.50
$38.50
ACS286
$14.95
JDS500
$32.50
ABC042
Engine Oil Fill Cap w/ Gasket
Fits: G
Replaces: 70800287
(1-3/4" I.D. tang to tang 1-3/8)
USA made
$12.95
Oil Fill / Breather Cap & Copper Filter
Element Fits: B, IB, C, CA, RC, WC (On
rocker arm cover); Late WD, WD45,
WF, D10, D12, D14, D15, D17, 170, 175,
190XT, I-40, I-400, I-60, I-600
Replaces: 70205298
(3-1/4" tall) USA made NOTE: Exact of
original. E-coated black. "Oil" stamped
into top.
Oil Fill Cap w/ Gasket
Fits: WD45, 170, 175 gas
Replaces: 70226376
(2-3/16" I.D.)
Oil Fill / Breather Cap w/ Clip
& Copper Filter Element
Fits: WC, Early WD, WF, (On governor
housing) D15 diesel up to engine SN:
D-03046 & D19 diesel up to engine SN:
D-03046, Replaces: 70207552
(1-1/2" tall) USA made NOTE: Exact of
original. E-coated black. "Oil" stamped
into top. Fits over 1-1/2" pipe.
Oil Fill / Breather Cap w/ Clip
& Filter Element fits: Same as JDS500
Replaces: 70207552
(1-1/2" tall)
NOTE: Economy style.
Oil pan drain plug, gaskets
Order #
ABC539
ABC540
Price
$7.95
$2.95
Price
$10.75
ACS293
$13.95
Oil Pan Gasket
Fits: B, IB, C, CA, D10, D12, D14, D15
gas, RC, I-40, I-400, I-60, I-600
Replaces: 70232325
USA made
ACS295
$16.95
Oil Pan Gasket
Fits: WC, WD, WD45, WF, D17, 170, 175
gas, Replaces: 70233602 (side gasket);
70236660 (WD, WD45 end gasket; D17,
170, 175 end gasket); 70229178 (main
bearing cap gasket)
ABC2823
$12.95
Oil Pan Gasket
Fits: G & others w/ N-62 Continental
engine, Replaces: 70800286
USA made
NEW! Oil Pan Gasket
Fits: 160, 6040 w/ Perkins 3-cyl. 144",
152" gas, diesel, Replaces: 7208178,
7208180, 7208181 NOTE: See website
for additional applications.
Oil filters, part
Order #
Price
ABC006
$19.95
ABC007
$9.85
ABC149
$7.40
Application
Oil Filter fits: B, IB, C, CA, G, RC, WC,
WD, WF, WD45 & WD45 diesel; D10, D12,
D14, (D17 gas, LP up to SN: 24001) w/
spin on-style filter, Replaces: 70240912
(4-5/8" tall) USA made
NOTE: Threaded neck type
Oil Filter fits: D15, (D17 SN: 24001 & up)
All gas, LP; 170, 175 gas, diesel
(All w/ spin on-style)
Replaces: 70251381
(5-1/4" tall, 3.675" O.D.)
USA made
Oil Filter fits: 160, 6040 (All diesels)
w/ cartridge-style filter
Replaces: 2080205
(4-1/2" tall, 2-3/4" W)
Description / Application
Oil Pan Drain Plug fits: (B SN: 64501 &
up), IB, C, CA, WC, WD, WD45, D10
thru D21, (170 gas only), (175 gas only),
180 thru 220, 6060, 6070, 6080, 7000,
7010, 7020, 8010 gas, diesel, LP
Replaces: 74026437
(7/8" x 18 NF) USA made
Description / Application
ACS357
ACS2397
Washer / Gasket (For ABC539)
Replaces: 70226012 USA made
NOTE: Copper.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$3.65
Oil Filter Base to Block Gasket
Fits: B, C, CA, D10, D12, D14, (D17 up to
SN: 24001), IB, RC, WC, WD, WD45, WF
(All gas, LP), Replaces: 70233228
(4-13/16" length, 1-1/2" tall, 3-1/2" c.c.
mounting holes) USA made
NOTE: Made of cork.
13
Engine parts
Underside view
Order #
Description / Application
Allis
Chalmers
Oil caps
Allis
Chalmers
Oil pump kit
Description
Engine parts
Muffler bracket
Fits: G w/ N-62 Continental engine
Replaces: 70800264, 70800266, 70800267,
70800271, 70800273, 70800658
USA made
Order # Fits: Early D17 gas, Styled WC, WD,
WD45; Will also fit the B, C, CA, RC if
customer trims approximately 1" off the
length & redrill one hole if needed
Price
Oil Pump Kit............................................................. ACS322.......... $176.70
NOTE: Must size bushing to fit.
Flywheel ring gears
Order #
Price
ACS032
$64.95
Fits: G w/ N-62 Continental engine
Replaces: 70800311
(9.199" I.D., 10.950" O.D.)
NOTE: Has 86 teeth.
$49.35
Fits: B, IB, C, CA
Replaces: 70209292
NOTE: Has 90 teeth.
ABC014
$56.25
Fits: RC, WC, WD, WD45 gas, WF
Replaces: 70208132
NOTE: Has 100 teeth.
ACS206
$59.95
Fits: D10 SN: 3501 & up, D12 SN: 3001
& up, D14 SN: 19001 & up & engine SN:
19070 & up, D15 gas, I60, I500, I600
Replaces: 70233196
NOTE: Has 116 teeth.
Economy muffler clamps
USA made
Price
$2.95
(1-1/2" clamp)
ABC570
$2.95
(1-5/8" clamp)
ABC572
$2.95
(1-3/4" clamp)
ABC574
$3.25
(1-7/8" clamp)
ABC576
$3.25
(2" clamp)
ABC578
$3.25
(2-1/4" clamp)
ABC580
$3.25
(2-1/2" clamp)
ABC583
$4.95
(2-3/4" clamp)
ABC585
$4.95
(3" clamp)
ABC2234
$4.95
(3-1/2" clamp)
ABC1771
$7.95
(4" clamp)
Price
Mufflers
Order #
Price
ACS067
$44.95
Application
Fits: G
Replaces: 70800458
NOTE: Exact of original.
ACS082
$51.60
Fits: B, IB, C, CA (1938-57) under hood
Replaces: 70210081 USA made
ACS082 (Vertical round body) Dimensions:
Inlet length: 1", Inlet O.D.: 1-1/2", Shell
length: 4-1/4", Shell diameter: 4-1/2" x 9",
Outlet length: 3-3/4", Outlet O.D.: Bent pipe,
Overall length: 9"
ACS101
$25.70
Fits: B, IB, C, CA, RC (1938-57) above hood
except low octane engine
Replaces: 227240 USA made
ACS101 (Vertical round body) Dimensions:
Inlet length: 7", Inlet O.D.: 1-1/2", Shell length:
12-3/4", Shell diameter: 3-1/4", Outlet length:
9-1/4", Outlet O.D.: 1-1/2", Overall length: 29",
If raincap is needed - order RCS003
ACS103
$37.85
Dimensions
ABC568
14
Order # Muffler Bracket......................................................... ACS1762............. $4.95
Application
ABC013
Order #
Description
Fits: B, IB, C, CA (1938-57) thru hood, D10,
D12, D14, D15 gas up to SN: 9001
Replaces: 70227240, 70233450 USA made
NOTE: Includes bracket.
ACS103 (Vertical round body) Dimensions:
Inlet length: 2-1/2", Inlet O.D.: 1-1/2", Shell
length: 16-1/2", Shell diameter: 3-1/4", Outlet
length: 10", Outlet O.D.: 1-1/2", Overall length:
29", If raincap is needed - order RCS003
ACS105
$30.25
Fits: WC SN: 106509 & up, WD gas
(1948-53), WD45D thru hood
Replaces: 70219534
USA made
ACS105 (Vertical round body) Dimensions:
Inlet length: 2-1/2", Inlet O.D.: 1-3/4", Shell
length: 16-1/2", Shell diameter: 3-1/4", Outlet
length: 10", Outlet O.D.: 1-3/4", Overall length:
29", If raincap is needed - order RCS004
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ACS107
$34.95
$52.40
Price
Fits: (D17 up to SN: 32000 gas, LP), G226,
W226, Late WC, WD, WD45 gas (1953-57)
Replaces: 70229531 USA made
$10.75
(2-1/4" - 2-7/16" I.D.)
RCS007
$10.95
(2-1/2" - 2-11/16" I.D.)
RCS009
$13.35
ACS107 (Vertical round body) Dimensions:
Inlet length: 2-1/2", Inlet O.D.: 1-3/4", Shell
length: 16-1/2", Shell diameter: 3-1/4", Outlet
length: 10", Outlet O.D.: 1-3/4", Overall length:
29", If raincap is needed - order RCS004
(3" - 3-3/16" I.D.)
RCS014
$34.80
(2-1/2" I.D.) USA made
NOTE: Chrome plated.
RCS015
$41.95
(3" I.D.) USA made
NOTE: Chrome plated.
RCS016
$45.95
(3-1/2" I.D.) USA made
NOTE: Chrome plated.
Fits: D15 gas SN: 9001 & up, I60, I600
Replaces: 70237811 USA made
ACS327 (Vertical oval body) Dimensions: Inlet
length: 3-1/4", Inlet I.D.: 1-3/4", Shell length:
12-1/2", Shell diameter: 4-1/2" x 9", Outlet
length: 12-1/2", Outlet O.D.: 1-3/4", Overall
length: 27", If raincap is needed - order
RCS004 & if clamp is needed - order ABC572.
ACS330
$57.50
Fits: D17 gas SN: 42001 & up
Replaces: 70246129 USA made
ACS330 (Vertical oval body) Dimensions: Inlet
length: 4-3/4", Inlet I.D.: 1-15/16", Shell length:
16-1/4", Shell diameter: 4-1/2" x 9", Outlet
length: 8", Outlet O.D.: 2", Overall length: 29",
If raincap is needed - order RCS005 & if clamp
is needed - order ABC572.
ACS2235
$59.95
ACS2231
$79.95
Exhaust pipe
Fits: 190 gas, diesel (use w/ ACS2231
muffler), 190XT; Serviceable for D21
Replaces: 70244555, 70243284
(Inlet and outlet I.D.: 3", o/a length: 40")
USA made
Description
Fits: 190 up to SN: 19000 (Non turbo)
under hood gas, diesel
Replaces: 70243283 USA made
NOTE: Silver finish. Use w/ ACS2233
straight pipe.
ACS2231 (Horizontal round body)
Dimensions: Inlet length: 2", Inlet I.D.: 2-3/8",
Shell length: 18", Outlet length: 2-3/4", Outlet
O.D.: 2-3/4", Overall length: 18"
Price
Price
Exhaust stacks - USA made
Chrome; Double wall (Lined)
Fits: B, IB, C, CA, RC, D10, D12, D14,
(D15 up to SN: 9001) (All w/ thru hood
mufflers)
(3" O.D.; 24" body + 5" base =
29" o/a Chrome; Double wall (Lined))
ACS230
ACS231
Description
Order # Price
Exhaust Stack (Straight)........................................ACS230.............$107.65
Exhaust Stack w/ Bend..........................................ACS231.............$125.95
NOTE: Customer must enlarge hole for B thru CA w/ 2-1/2" hood
exhaust hole. For ACS230 use RCS015 raincap.
Fits: D17 gas except series IV, WC, WD,
WD45 gas
(3-1/2" O.D.; 22-1/2" body + 6-1/2" base =
29" o/a Chrome; Double wall (Lined))
Raincaps
Order #
Order #
Exhaust Pipe............................................................. ACS2233............$37.95
NOTE: Black finish.
Fits: 180, 185 gas, diesel
Replaces: 70248883 USA made
NOTE: Black finish.
ACS2235 (Vertical oval body) Dimensions:
Inlet length: 2-3/4", Inlet I.D.: 2-3/8", Shell
length: 16-1/4", Outlet length: 15", Outlet O.D.:
2", Overall length: 34"
Dimensions
Engine parts
ACS327
Order #
RCS006
Application
Allis
Chalmers
Raincaps cont...
Mufflers cont...
Dimensions
RCS002
$9.65
(1-1/4" - 1-7/16" I.D.)
RCS003
$9.80
(1-1/2" - 1-11/16" I.D.)
RCS004
$9.95
(1-3/4" - 1-15/16" I.D.)
RCS005
$10.35
(2" - 2-3/16" I.D.)
ACS187
ACS186
Description
Order # Price
Exhaust Stack (Straight)....................................... ACS187............. $115.35
Exhaust Stack w/ Bend......................................... ACS186............. $135.95
NOTE: For ACS187 use RCS016 raincap.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
15
Allis
Chalmers
Engine parts
Choke parts
Carburetors, parts cont...
Order #
Price
ACS344
$24.95
Choke Rod
Fits: G, Replaces: 800118
(27 1/8" o.a. length)
USA made
ABC423
$9.95
Universal Choke Cable
Fits: Tractors, Forklifts & other
applications using 72" or less cable
NOTE: Metal sheathed. Cut to length.
Can also be used as a 'Stop' cable for
diesel engines.
JDS718
ABC2426
ACS2699
$18.75
$7.50
$7.95
Description / Application
Order #
Price
$7.50
Carburetor Fuel Inlet Elbow & Strainer
Assy. fits: Allis Chalmers models
(Male end (Screen end) - 1/8" pipe thread;
female end - 1/4" flare)
NOTE: Must have internal threads. Used
w/ flair fitting; NOT compression fitting.
ABC564
$26.40
Main Jet Adjustment Needle Assembly
(For Zenith carburetors)
Fits: D10, D12 w/ carb 12401, 12577, 12749;
WC, WD w/ carb 9707, 10981, 14012
Replaces: 70223897
(3/8" x 24" thread) USA made
ABC557
$29.95
Main Carburetor Nozzle
(For Zenith carburetors)
Fits: B, IB, C, WC, WF, WD (All w/ carb
9707, 9707A, 9707B, 10981, 10981A, S1203)
Replaces: 70223893, C66-47-50 USA made
ABC1156
$23.95
Main Carburetor Nozzle
(For Marvel Schebler carburetor)
Fits: B, IB, C, RC (All w/ TSX154, 305)
Replaces: 70222047, 47-270
ABC133
$6.15
VITON Needle Float Valve
(For Marvel Schebler carburetors)
Fits: D15 SN: 9001 & up, D17, D19, WD45,
170, 175 (All w/ TSX 464, 561, 591, 773,
783, 821, 848, 853), Replaces: 70226458,
133-543 (0.100" orifice) USA made
NOTE: VITON needle & seat helps stop
carburetor flooding.
ABC230
$6.45
VITON Needle Float Valve
(For Marvel Schebler carburetors)
Fits: B, C, CA, D14, D15, G, IB, RC, WC,
WD, WF All w/ TSX 154, 159, 305, 422,
470, 486, 670, 701, 815, 844, 879, 912, 931,
986, 990 (All TSV series)
Replaces: 70244912 (.080 orifice)
USA made NOTE: Viton needle & seat
helps stop carb flooding.
Carburetor
Fits: G w/ Marvel Schebler TSV 13
Replaces: 70800303 (1-13/16" c.c. carb
mounting holes) NOTE: Does not say
"Marvel Schebler," but has "TSV13" brass
tag. Like original.
ABC513
$2.50
Throttle Body Repair Bushing (For small
bowl Marvel Schebler carburetors)
Fits: B thru D15 (.383" O.D., .247" I.D.,
.501" long) USA made NOTE: Repairs
worn throttle body using 1/4" throttle
shafts. Must ream to size.
Carburetor New, Zenith Replacement
Fits: B, IB, C, CA, D10, D12, Replaces
Marvel Schebler: TSX 154, 159, 305, 422,
470, 486, 670, 701, 815, Replaces: 9705,
9706, 9797, 9804, 11141, 11142, 12401, 12522,
12566, 12749 USA made
NOTE: Has 1-1/8" throttle bore. May
have to trim throttle shaft on some
applications. Will fit manifolds w/ 2-5/16"
- 2-3/8" c.c. stud holes because of the
smaller dia. studs that are included.
ABC1159
$5.00
Throttle Disc (For Marvel Schebler
carburetor) fits: B, IB, C, CA, RC, WC, WD,
WF (All w/ TSX154, 159, 305, 422, 470, 486)
Replaces: 70219971, 14-175
(15°, 1.105" O.D.) USA made
ABC1182
$18.50
Choke Disc (For Marvel Schebler
carburetor) fits: B, C, CA, IB, RC, WD45
(All w/ TSX154, 305, 464, 470)
Replaces: 70219984, 27-530, 27-539
(1-5/16" O.D.) USA made
Universal Choke Cable
Fits: Tractors, Forklifts & other
applications using 47"or less cable
(47" long) NOTE: Metal sheathed w/
"CHOKE" on knob. Cut to length.
Choke or Fuel Shut Off Cable Clip
(For Marvel Schebler choke cable bracket)
Fits: D15 SN: 9001 & up, D17 SN: 42001
& up, D19, 170, 175, H3, I500, I600; Also
works for diesel fuel cable shut off for
7000 thru 7580, Replaces: 74047137
NOTE: See website for a complete listing
of applications & carburetor numbers.
NEW! Choke Knob fits: D10 up to SN:
3501, D12 up to SN: 3001, D14, D17 up to
SN: 32001, (D17 diesel up to SN: 32001 as a
fuel shut off knob), Replaces: 70228321
(1/4" - 20 thread, 1.035" O.D.) USA made
Carburetors, parts
NOTE: Can't find your carburetor number? Look on page 321.
Carburetors are limited to replacement only - NO refunds.
No replacement will be given if dirt, rust, etc. is found in the
carburetor or if it has been taken apart.
Order #
Price
ACS084
$375.50
ABC223
$358.90
16
Description / Application
ABC297
Description / Application
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ABC1171
$35.70
Carburetor floats cont...
Description / Application
Application
$15.75
(For Zenith carburetors) fits: B w/ carb
9635, A, 9636, A, 9706, 9804; IB, C w/ carb
9635, A, 9636, A, 9706, 9804, 10697, 10698;
CA; RC w/ carb 9492, 9507; WC w/ carb
10981; WD, WF, D10 w/ carb 12577, A,
12749; D12 w/ carb 12749; D14, D15 w/
carb 8561, 8979, 9635, A, 9636, A, 9705 9706,
9707, 9797, 9804, 9805, 10697, 10698, A,
10699A, 10902, 10903, 10981, 11141, 11142,
12401, 12749, 12522, 12566, 14544; Power
Units w/ carb 10697, 12621, 12658, 14015,
14025, Replaces: Replaces: 70223920, Zenith
C85-28
ABC037
$19.95
(For Marvel Schebler carburetors)
Fits: D15, D17, WD45, 170, 175, 180, 185
(All w/ TSX 464, 561, 773, 869, 871, 928);
Power Units w/ TSX 466, 561, 719, 773, 853,
950, 992, 1001, Replaces: 70226456, Marvel
Schebler 30-739, 30-631
IHS575
$78.50
Manifold to Carburetor Gasket
Fits: D19 gas, Replaces: 70238174
(2-15/16" c.c. bolt holes, 1-3/4" center
hole)
ABC454
$35.75
Carburetor Gasket Kit
(For Big Bowl Marvel Scheblers)
Fits: Some WD45, D15, D17, 170 thru 185
Replaces: 70226470 NOTE: Fits same carb
numbers as FDS212 economy kit on page
18.
ABC452
$23.60
ABC361
$29.50
ABC1352
$55.40
ABC1355
$22.80
Choke Disc (For Marvel Schebler
carburetor) fits: CA, D14, D15
(All w/ TSX670, 701, 815)
Replaces: 70229611, 27-573
(1-3/8" O.D.) USA made
Order #
Carburetor gaskets - USA made
Order #
ABC543
ABC408
ABC410
ABC2275
Price
$1.95
$1.39
Description / Application
Manifold to Carburetor Gasket
Fits: G w/ N-62 Continental engine
Replaces: 70800304
(1-13/16" c.c. bolt holes, 15/16" center
hole)
Manifold to Carburetor Gasket
Fits: B, C, CA, D10, D12, D14, D15, D17, IB,
RC, WC, WD, WD45, WF, 170, 175
Replaces: 70233209
(2-3/8" - 2-7/16" slotted bolt holes,
1-1/8" center hole)
$1.39
$3.95
(For Zenith carburetors)
Fits: U w/ carb 10380, Power Units w/ carb
12504
Carburetor floats
Order #
ACS075
ABC036
Price
$32.95
$11.95
Application
(For Marvel Schebler carburetors)
Fits: G, Power Units w/ TSV 13, 15, 16, 17,
18, 21, 22, 24, 27, 35, 37, 45, 47, 48, 49, 50, 52,
53, 54, Replaces: 70800472, Marvel Schebler
30-667
(For small bowl Marvel Schebler
carburetors) fits: B, C, CA, D14, D15, IB,
RC, WC, WD, WF w/ TSX 154, 159, 305,
422, 470, 486, 670, 701, 815, 844; Power
Units w/ TSX 305, 879, 912, 931
Replaces: 70219985, Marvel Schebler 30-600
(For Zenith K5 carburetors)
Fits: M, U, UC (All w/ carb 6496, 6699,
6817) (Fits OEM carb U1750, 2043, 2212)
Replaces: 70223922
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
(For Zenith carburetors) fits: D15, D17,
WD45 (All w/ carb 12232); 170, 175 (Both
w/ carb 11588, 12217, 12232, 12287A, 12590,
12722A, 12920, 13268, 13294, 13416, 14991),
180; Power Units w/ carb 13151, 13153,
13154, 13161, 13596, 13628, 13956
Replaces: 70227103
(For Marvel Schebler carburetors)
Fits: D19 w/ TSX 848; Power Units w/ TSX
160, 268, 591, 621, 783, 786, 821, 848, 876,
918, Replaces: 74055431
(For Holley carburetors)
Fits: Early 190
Replaces: 74056661, LIST2871,2871-1,
LIST3257,3257-1
(For Zenith 63-11, 63-12, 69 series
carburetors)
Fits: 190 w/ carb 12777, 13303, 13327, 13343
Replaces: 74046589
17
Engine parts
Price
ABC190
Allis
Chalmers
Carburetors, parts cont...
Allis
Chalmers
Carburetor repair kits cont...
Carburetor repair kits
NOTE: Can't find your carburetor number? Look on page 321.
Order #
Economy carburetor repair kits contain: Needle & seat, float
Price
lever pin, seal, gaskets & instructions.
ABC552
$21.95
ABC1349
$24.95
Economy Carburetor Repair Kit
(For Zenith carburetors)
Fits: D17, 170 (both w/ carb 11588, 12217,
12232, 12590, 13294, 13416)
Replaces: Zenith K2048, K2049, K2050,
K2127, K2136
ABC1918
$34.95
Economy Carburetor Kit
(For Holley carburetors)
Fits: Early 190 w/ Holley # LIST2871,
LIST2871-1, LIST3257, LIST3257-1. Also
fits OEM carb #'s 4020206, 4020418,
4020985, 4020986 NOTE: Includes repair
components for acceleration pump,
piston assy. spring, and retainer. Float
valve seat & diaphragm not included.
ACS306
$69.65
Basic carburetor repair kits contain: Throttle shaft, needle
Engine parts
Description / Application
Economy carburetor repair kits - USA made cont...
& seat, float lever pin, seal, gaskets & instructions.
Complete carburetor repair kits contain: Choke & throttle
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: D15 w/ TSX 591, 839, 863;
Power Units w/ TSX 783, 821, 876, 918
shafts, needle & seat valve, float lever pin, miscellaneous plugs
& screws, throttle shaft seals, adjustment screw & gaskets.
Order #
Price
Description / Application
Economy carburetor repair kits - USA made
ACS051
$24.95
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: G, Power Units w/ TSV carbs
ABC220
ABC1346
ACS1343
ABC222
$22.50
$25.70
$24.30
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: B, C, IB, RC (All w/ TSX 154, 305);
CA w/ TSX 470, 486, 670, 701, 815; D14 w/
TSX 670, 701, 815; D15 w/ TSX 815, 844;
WC, WD, WF (All w/ TSX 159, 422); H3,
Power Units (both w/ TSX 879, 912, 931,
986, 990)
Economy Carburetor Repair Kit
(For Zenith carburetors) fits: B, C, CA,
D10, D12, IB, RC, WC, WD, WF (All w/
carb S906, S1203, S1204, S1585, 8561, 8691,
8781, 8979, 9635, 9636, 9705, 9706, 9707,
9707A, 9707C, 9804, 9805, 10697, 10697A,
10698, 10698A, 10699, 10699A, 10902,
10902A, 10903, 10903A, 10981, 10981A,
11141, 11141A, 11142, 11142A, 12262, 12273,
12401, 12577, 12577A, 12749, 14544)
NOTE: Fits 61, 68, 161 series Zenith carbs.
Economy Carburetor Repair Kit
(For Zenith carburetors)
Fits: D19, 180, 190, 190XT (All w/ carb
12511, 12540, 12777, 12893, 13303, 13343)
Replaces: 4021805, 4022025; K2039, K2040
(Zenith kit); 4059661, 74062473 (kit)
$24.95
18
$21.95
Basic Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: G w/ TSV 13
ABC473
$37.75
ABC177
$38.50
Basic Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: B, IB, C, CA, RC (All w/ TSX 154,
305, 470, 486, 670, 701, 815)
Basic Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: WC, WD, WF (All w/ TSX 159, 422)
ABC216
Economy Carburetor Repair Kit
(For Zenith carburetors)
Fits: WC, WF (both w/ carb 6793, 7071,
7078, 7078A, B, C, 7178, 7971, 8672)
FDS212
Basic carburetor repair kits
$39.95
Basic Carburetor Repair Kit
(For Marvel Schebler carburetor)
Fits: D17, WD45 (both w/ TSX 464, 561,
773, 797, 871)
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: D15 w/ TSX 869; D17 w/ TSX 561,
869, 871; D19 w/ TSX 848; WD45 w/ TSX
464, 561, 773, 836, 871; 170, 175, 180, 185
(All w/ TSX 928); D Grader, Power Units
(both w/ TSX 719, 853, 950)
IHS574
$54.70
Basic Carburetor Repair Kit
(For Zenith K5 carburetors)
Fits: IU, M, U, UC (All w/ carb 6496, 6699,
6817) (Fits OEM carb U1750, 2043, 2212)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
Description / Application
Complete carburetor repair kits
ABC232
Complete Carburetor Repair Kit
(For Zenith carburetors)
Fits: B, IB, C, RC (All w/ carb 9705, 9706,
9804, 10697, 10698, 10698A, 10902A,
10903A) (Fits OEM carb 211954, 224640,
224641)
Order #
Price
$7.95
Governor Control Rod Spring
Fits: G, Replaces: 70800248
(2-1/2" o/a length; 11/16" O.D.)
USA made
ACS304
$12.50
Governor Rod Linkage Spring
(For distributor or magneto ignition)
Fits: B, IB, C, CA, D10, D12, D14, D15, RC,
I-40, I-400, I-60, I-600
Replaces: 70212321
$43.20
Complete Carburetor Repair Kit
(For Zenith carburetor)
Fits: CA w/ carb 11141, 11142 (Fits OEM
carb 225621, 225622)
ABC1311
$48.55
ABC178
$53.50
Radiators, parts
Order #
Complete Carburetor Repair Kit
(For Zenith carburetor)
Fits: RC w/ carb 9492, 9507 (Fits OEM carb
209662, 209663)
Complete Carburetor Repair Kit
(For Zenith carburetors)
Fits: WC, WD, WF (All w/ carb 8979, 9707,
9707A, 9707C, 10981, 10981A) (Fits OEM
carb 209312, 213348, 224749)
Price
Order #
ACS317
Price
$273.00
Radiator (Pressurized)
Fits: B, IB, C, CA, (D10 up to SN:
3501), D12 up to SN: 3001
Replaces: 70232113
(CORE measurements: 14-3/4"
height, 15" width, 2-1/4" depth.
These are not overall dimensions)
NOTE: Must use ACS209 or
ABC008 radiator caps only.
ACS114
$310.95
Radiator (Pressurized)
Fits: Styled WC, WD, WD45 gas, WF
Replaces: 70228587
(CORE measurements: 18-1/2"
height, 18" width, 1-3/8" depth.
These are not overall dimensions)
NOTE: Will fit tractors w/ 4
blade fan only, not 5 blade fan.
Fan shroud opening is 17-1/8" so
customer may have to trim to clear
or order ACS183 Fan.
ACS109
$499.75
ABC455
$2.95
ABC209
$2.95
Description / Application
$169.95 NEW! Governor (For Magneto Ignition)
Fits: B, C, CA, IB, RC
Replaces: 70207583
(3.775" o/a length) NOTE: For magneto
ignition or for tractors w/ aftermarket
distributor kit DELCO #1111411.
Will NOT fit factory Allis Chalmers
distributor.
$94.50
NEW! Governor Gear
Fits: D17, 170, 175 w/ 4-cylinder 226" gas
Replaces: 70229510, Casting AM4479
NOTE: 27 teeth. Weights & pins sold
separately.
ACS318
$24.50
NEW! Governor Weight
Fits: D17, WC, WD, WD45, WF, 170, 175
w/ 4-cylinder 201 or 226" gas
Replaces: 70229980 NOTE: 2 used per
tractor; Sold individually.
ACS319
$3.65
NEW! Governor Weight Pin w/ (2) Clips
Fits: D17, WC, WD, WD45, WF, 170, 175
w/ 4-cylinder 201 or 226" gas engines
Replaces: 70207719 (clip), 70211368 (pin)
USA made NOTE: 2 pins used per
tractor; Sold individually.
Description / Application
ACS128
Governor, parts
ACS166
Description / Application
ACS182
Engine / Cooling parts
ACS1385
$48.50
Governor, parts cont...
Allis
Chalmers
Carburetor repair kits cont...
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Radiator
Fits: D17 gas
Replaces: 70229702
(CORE measurements: 19-1/4" H,
18" W, 2" D These are not overall
dimensions)
Radiator Mounting Pad
Fits: Most Allis Chalmers models
(2" x 2", 1/4" thick)
NOTE: 2 used per tractor;
Sold individually.
Radiator Drain Plug
Fits: B thru 8550, Replaces: 912415
(1/4"-18 NPT) USA made
NOTE: See website for full applications.
Radiators, parts continue on next page
19
Allis
Chalmers
Cooling parts
Radiators, parts cont...
Order #
Price
ACS192
$32.50
ACS249
$34.95
Radiator caps w/ gaskets cont...
Description / Application
Order #
ACS209
Lower Water Pipe
Fits: B, IB, C, CA, RC
Replaces: 70227184
(1-1/8" O.D. x 10)
Price
Application
$14.95
Fits: B SN: 61221 & up, C SN: 18580 & up,
CA, D10, D12, D14, D15, D17, D19, D21,
G, H3, HD3, WC SN: 74430 & up, WD,
WD45, 170, 175, 180, 185, 190, 190XT, 200,
210, 220, I-40, I-400, I-60 & I-600, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060,
7080, 7580, 8550, Replaces: 70254891
NOTE: Original style
Lower Water Pipe
Fits: D10, D12, D14, D15 gas, LP
Replaces: 70233431
Radiator hoses, clamps
Radiator caps w/ gaskets
Order #
MHS045
Price
$12.95
Underside view
ACS172
$19.95
Underside view
MHS043GK $1.50
IHS337
$9.95
Underside view
IHS239
ABC008
(4 PSI)
$1.95
ABC1396
(7 PSI)
$8.95
Underside view
20
Price
ACS208
$2.55
ABC055
$6.05
Radiator Hose (Upper/Lower)
Fits: (Upper for WC, WD, WD45, WF);
(Lower for Early D17 diesel up to SN:
38963), Replaces: 70233153
(1-7/16" I.D., 10" long, 1-13/16" O.D.)
ABC406
$6.95
Radiator Hose (Lower)
Fits: WC, WD, WD45 gas, WF
Replaces: 70203090
(1.485" I.D., 1.875" O.D., 5.485" long)
ACS259
(Upper)
$14.90
Application
(For Non-Pressurized systems)
Correct for B up to SN: 101; Serviceable
for B up to SN: 61222 & C up to SN:
18580 (ACS172 is correct for these
applications), Replaces: 70206459
(1.761" tang length)
(For Unpressurized systems)
Fits: B up to SN: 61221, IB to SN: 1000, C
up to SN: 18580, RC, Styled WC, Styled
WF, Replaces: 70207244
NOTE: Fits original radiator only, not
aftermarket. Original style.
Gasket only (For ACS172)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
Description / Application
Radiator Hose (Upper / Lower)
Fits: B, IB, C, CA, D10, D12, D14, RC
Replaces: 70207173
(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long)
Radiator Hose
Fits: D17 gas
ACS259 Replaces: 70229636
ACS257 Replaces: 70229209
(1-1/2" I.D., 1-13/16" O.D.)
(For Unpressurized systems)
Fits: Unstyled WC, Unstyled WF, Power
Unit: W201, Replaces: 70206622
(2.886" O.D., 0.398" tang width, 1.845"
inside center dia.)
ACS257
(Lower)
$15.90
Gasket only
(For IHS337 Cap)
(3.563" O.D., 1.875" I.D., .125" thick)
NOTE: NBR rubber.
ACS2248
$12.50
Water ByPass Hose
Fits: WD45, W226 gas Power Unit SN:
50789 & up, Replaces: 70227018 USA made
ACS2252
$12.95
Water ByPass Hose
Fits: D17, 170, 175 gas, LP
Replaces: 70229341
ABC492
$2.70
Clamp (For Upper / Lower)
Fits: B, IB, C, CA, D10, D12, D14, RC
Replaces: 911290
(For 1-5/8" hose O.D.)
NOTE: Will fit ACS208 radiator hose.
FDS258
$3.60
Clamp (For Upper / Lower 1-3/4" to 2"
O.D. Radiator Hose) fits: D17 gas, Early
D17 diesel up to SN: 38963, WC, WD,
WD45 gas, WF, Replaces: 921912, 921913
NOTE: Will fit ACS259, ACS257, ABC055,
ABC406 radiator hoses.
$8.75
Underside view
Order #
(For Pressurized systems)
Fits: B SN: 61221 & up, C SN: 18581 &
up, CA, G, RC, WC SN: 74430 & up, WD,
WD45, WF, Replaces: 70228545
(1.500" radiator neck I.D., 2.330" O.D.,
2.000" tang to tang)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
IHS913
Price
Description / Application
$34.95
Thermostat fits the following equipped w/
4-bolt water manifold bypass: B w/ engine
SN: 126210 & up, C w/ engine SN: 60157
& up, CA w/ engine SN: 195136 & up; All
D10 thru D-17, WD45, 170, 175 gas, LP
Replaces: 226505, 70229927
(160º Temp)
$13.50
Thermostat fits: D10, D12, WC, WD, WF
Replaces: 70210157
(180º Temp)
USA made
ABC052
$11.50
Thermostat fits: B, C CA, IB (All w/ cast
iron 2 bolt thermostat housing, must reuse
spacer spring); Late D17 diesel, D21, 180,
185, 190, 190XT, 210, 220, 6040, 7000 - 8070
Replaces: 70209720, 74025103, 72080437
(160º Temp) USA made NOTE: Gasket
included fits Ford models only.
ACS1214
$49.95
Thermostat Housing Bypass Cover
Fits: WD45, D17, 170, 175, (W226 Power
Unit SN: PO97614 & up) gas;
Combines: E3, K gas, Replaces: 70262804
NOTE: If gasket is needed order ACS1571
gasket.
ACS1219
ACS1571
$49.95
$6.50
Thermostat Housing Cover
Fits: WC, WD, WF
Replaces: 70262805
NOTE: If gasket is needed order
ACS1571.
Thermostat Housing Gasket only
Fits the following w/ 201, 226" gas, LP:
D17, WC, WD, WD45, WF, 170, 175
Replaces: 70210158 USA made
NOTE: Cork.
Order #
ACS229
Price
Fits: WC, WD, WD45 gas, WF
Replaces: 70250396
ACS2799
$125.80
NEW! Fits: D17, 170, 175 w/ Late 226" gas,
LP engines, Replaces: 229465, 79003710
NOTE: Includes cast iron pulley, backing
plate & gasket.
Fan blade
Fits: D17 gas, diesel, WC, WD, (WD45 gas,
diesel), WF, Replaces: 70240973
(16-7/8" O.D. tip to tip, 3-7/8" blade width,
1" pilot, 1-1/4" c.c. bolt holes, 5/16" bolt
hole dia.)
Description
Order # Order #
ACS227
ACS2795
Price
$125.65
Fan belts
NOTE: Verify belt size before ordering.
Order #
Price
ABC059
$11.80
Fits: G, (WC, WF both w/out generator)
Replaces: 800116, 70203073
(Notched; 5/8" x 40")
ABC009
$12.95
Fits: B, IB, C, CA, D10 up to SN: 3501, D12
up to SN: 3001, D14 (All w/ generators)
Replaces: 70209656
(5/8" x 36-1/2")
ABC010
$14.95
Fits: WC, WD, WD45 gas, WF
(All w/ generators), Replaces: 70209824
(5/8" wide x 45-1/2" long)
$124.95
Application
Fits: B, IB, C, CA, (Early D10, D12 w/
sheet metal pulley), RC D14, (Early D15
w/ sheet metal pulley), RC
Replaces: 70250397
NOTE: Will NOT fit engines w/ cast
pulley.
NEW! Fits: 'Some' D10, D12, D15 gas, LP &
Industrials all w/ FIXED cast iron pulley,
Replaces: 233394, 79004256
NOTE: See website for full applications.
Includes pulley, backing plate and
gasket.
Price
Fan Blade (4 Blade)................................................. ACS183............. $22.30
Water pumps
NOTE: NEW; No core charge
Description / Application
$135.22
Application
ABC1648 $15.50
Fits: D17, D19 gas, LP, 6040 (fan)
Replaces: 70229211
(17/32" x 45-1/4")
ABC414
$11.55
Fits Deutz-Allis: 5220, 5230 (both fan/alt)
Replaces: 71131774, 70237386
(1/2" x 41-1/4")
FDS1453
$12.50
Fits: 6060, 6070, 6080 (fan/alt)
Replaces: 70263408
(1/2" x 53-1/4")
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
21
Cooling parts
ABC1086
Water pumps cont...
Allis
Chalmers
Thermostats, parts
Allis
Chalmers
Traction booster gauge
Fits: CA, (D10 up to SN: 9199), (D12 up
to SN: 9167), D14, (D15 up to SN: 9000),
D17 up to SN: 75000), D19, WD, WD45
Replaces: 70235598
(1/4" male flare end)
Gauges
Description
Order # Price
Traction Booster Gauge.........................................ACS124.............. $99.95
w/ "Allis Chalmers" name
NOTE: Functional, like original!
Oil pressure gauges w/ stainless steel bezel
NOTE: ACS Gauges have a metal base, glass lens & stainless
steel bezel. Includes "ALLIS CHALMERS" name. For 2" diameter
hole. ABC Gauges have a stainless steel bezel & vary from
original appearance. Does not include "ALLIS CHALMERS"
name.
When ordering a dash mounted oil pressure gauge you will also
need to order (1) of the following fittings depending on the line
size to adapt your existing line to the gauge: ABC538, IHS626.
Order #
Price
ABC004
$18.95
ACS159
$29.95
(0-30 PSI)
Fits: B, C, CA, G, IB, RC, WC, WD45; Some
U, UC (Both w/ SN: 15345 & up & w/
engine mounted oil pressure gauge)
Replaces: 70203805, U3805
(1/8" NPT male thread) NOTE: Engine
mounted. Includes "Allis Chalmers"
name. Screws into oil filter housing.
ACS160
$29.95
(0-45 PSI)
Fits following gas, LP: D10, D12, D14, D15,
D17, I-40, I-400, I-60, I-600
Replaces: 70228718, 70228719
(1/8" NPT male thread)
NOTE: Dash mounted. Includes "Allis
Chalmers" logo. Line adapter sold
separately.
ACS262
$34.95
(0-80 PSI)
Fits the following gas: Some A, D19, (U,
UC up to SN: U15344 w/ dash mounted
gauge); Fits the following diesels: D15,
D17, D19, WD45, Replaces: 70232546
(1/8" NPT male thread) NOTE: Dash
mounted. Includes "Allis Chalmers"
name. Line adapter sold separately.
ABC082
$18.95
ABC005
$18.95
Amp gauges w/ stainless steel bezel
USA made
ACS Gauges have a glass lens & stainless steel bezel. Includes
"ALLIS CHALMERS" name. For 2" diameter hole. ABC Gauges
Application
BACK IN STOCK! (0-30 PSI)
Fits: B, IB, C, CA, G, RC, WC, WD, WD45,
WF, Replaces: 70207834
(1/8" NPT male thread)
NOTE: Engine mounted. Screws into oil
filter housing. No logo.
have a stainless steel bezel & vary from original appearance.
Does not include "ALLIS CHALMERS" name.
Order #
Price
ABC016
$12.25
Application
(20-0-20)
Fits: B, IB, C, CA, G, WC, WD, WD45,
WD45 diesel, WF, RC, Replaces: 70208302
NOTE: No logo.
ACS258
$29.95
ABC109
$12.25
(30-0-30)
Fits: B, C, CA, D10, D12, D14, D15, D17,
D19, D21, G, H3, HD3, RC, WC, WD,
WD45, WD45 diesel, WF, 170, 175, 180,
185, 190, 190XT, 200, 210, 220
Replaces: 70254407
NOTE: Includes "Allis Chalmers" name.
(30-0-30)
Fits: D10, D12, D14, D15, D17, D19, D21,
170, 175, 180, 185, 190, 190XT, I-40, I-400,
I-60, I-600, Replaces: 70254407
NOTE: No logo.
ACS1833 $29.95
ABC466
(60-0-60)
(For tractors converted to 12-v system)
Fits: B thru WD45; D10 thru D21; 160 thru
220 NOTE: Includes "Allis Chalmers"
logo. See website for additional
applications.
$14.95
(60-0-60)
Fits: B thru 220 w/ Alternator system
NOTE: No logo.
22
(50 PSI)
Fits: D10, D12, D14, D15, D17 series I & II,
I-40, I-400, I-60, I-600, WD45 diesel
Replaces: 70228719 (1/8" NPT male
thread) NOTE: Dash mounted. No logo.
Line adapter sold separately.
(80 PSI)
Fits: D15 diesel thru 220
Replaces: 70200197
(1/8" NPT male thread)
NOTE: Dash mounted. No logo.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
cont...
Order #
Price
ABC523
$23.95
IHS626
$13.40
$12.85
Oil Gauge Fitting
For gauges w/out removable fitting
Replaces: 919095
(1/8" pipe thread to 1/8" compression)
USA made NOTE: Brass. Use w/ ABC523
line kit.
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/4" compression)
USA made NOTE: Brass.
steel bezel. Includes "ALLIS CHALMERS"
name. For 2" diameter hole.
NOTE: Available Summer 2015.
Order #
Price
Gauges
ABC538
ACS Gauges have a glass lens & stainless
Description / Application
Oil Gauge Copper Line Kit
For tractors using 1/8" x 6’ copper oil line
(6’ - 1/8" line, (2) 5/16 - 24 UNF Nut, (2)
compression sleeves, (1) 1/8 - 27 NPTF
female to 5/16 - 24 UNF male adaptor, (1)
1/8 - 27 NPTF) NOTE: Use w/ ABC538
fitting.
Allis
Chalmers
Fuel gauges w/ gasket &
stainless steel bezel
Oil pressure gauges w/ stainless steel bezel
Application
ACS2640 $74.95
NEW! Fits: D10, D12, D14, D15, ED40, H3
Replaces: 227865, 70227865
ACS2651 $74.95
NEW! Fits: D17 gas, diesel
Replaces: 229188, 70229188
Tachometers / operation meter, parts
Order #
ACS311
Price
Description / Application
$189.95
Tachometer / Operation Meter
Fits: D10 & D12 both up to SN: 9000
Replaces: 70232189 (tachometer),
70232177 (1 bracket), 70232176 (mounting
clamp) NOTE: Has AC logo.
Water temperature gauges w/ stainless steel
bezel
ACS Gauges have a metal base, glass lens & stainless steel bezel.
Includes "ALLIS CHALMERS" name. For 2" diameter hole.
ABC Gauges have a stainless steel bezel & vary from original
appearance. Does not include "ALLIS CHALMERS" name.
Order #
Price
ACS064
$29.95
ABC239
ABC1593
$48.50
$27.25
$28.00
JDS1802
$39.95
Application
Fits: B, IB, C, CA, RC, WC, WD, WD45, WF
Replaces: 70213675
NOTE: Threads into radiator neck.
Includes "Allis Chalmers" logo.
ACS260
ACS312
Fits: D10, D12, D14, D15 gas, diesel, D17
gas, diesel, WD45 diesel
Replaces: 70235724
(70" lead 5/8"-18 U.F. end w/ 1/2" NPT
pipe bushing) NOTE: Dash mounted.
Includes "Allis Chalmers" logo.
Fits: D10, D12, D14, D15, D17, D19, I-40,
I-400, I-60, I-600 gas, diesel; WD45 diesel
(110º - 230º temperature range, 90º pointer
sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe
bushing) NOTE: Dash mounted; No logo.
Tachometer Cable w/ Nylon Sheath
Fits: D10 & D12 both up to SN: 9000
Replaces: 70244104
(41-3/8" long w/ key)
NOTE: Measure before ordering.
Tachometer Cable w/ Nylon Sheath
Serviceable for D10 & D12 both up to SN:
9000 (43-1/8" long w/ key)
NOTE: Measure before ordering.
ACS265
$78.95
Tachometer / Operation Meter
Fits: D14, (D15 gas up to SN: 6630),
D17 gas, I-40, I-400, Replaces: 70242376,
70276770, 70277450
NOTE: Has AC logo.
ACS289
$29.95
Fits: D10 thru D17
(60" lead, 5/8-18 UNF w/ 1/2" pipe
bushing)
NOTE: Dash mounted; No logo.
$124.00
Tachometer / Operation Meter
Fits: D15 gas SN: 6631 & up, I-60, I-600
Replaces: 70236777
Tachometers / operation meter, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
23
Allis
Chalmers
Gauges
Tachometers / operation meter, parts cont...
Order #
Price
ACS1228
$34.95
JDS790
$29.95
ACS1505
$174.95
Tachometers / operation meter, parts cont...
Description / Application
Order #
ACS278
Tachometer Cable w/ Metal Sheath
Fits: D14, D15 gas
Replaces: 70228767, (cable), 70261609
(key end)
(47" long w/ key)
Tachometer Cable w/ Metal Sheath
Fits: D15 diesel, D17 gas, (D21, 190,
190XT diesels w/ camshaft driven
tachometer), Replaces: 70229751, (cable),
70261608 (key end)
(56" long w/ key)
NOTE: Limited supply, replacing w/
nylon sheath.
$28.50
NEW! Tachometer Cable w/ Metal
Sheath fits: D19 gas
Replaces: 70237076, 70261605
(61-1/4" long with square ends)
ACS1230
$34.95
ACS1912
$16.50
ACS1915
24
ACS2803
$49.95
NEW! Tachometer Drive Assembly
Fits: D21, 170, 175, 180, 185, 190, 190XT,
200, 210, 220, Replaces: 246764, 70246764
NOTE: For alternator driven tach
drive. Mounts on rear of alternator. 12
& 45 tooth gears. Count teeth before
ordering.
ACS2805
$24.95
NEW! Tachometer Driven Gear & Shaft
Fits: D21, 170, 175, 180, 185, 190, 190XT,
200, 210, 220, Replaces: 250488, 70250488
NOTE: For alternator driven tach drive.
45 teeth. Count teeth before ordering.
ACS2809
$14.95
NEW! Tachometer Drive Gear
Fits: D21, 170, 175, 180, 185, 190, 190XT,
200, 210, 220, Replaces: 250487, 70250487
NOTE: For alternator driven tach cable.
12 teeth. Count teeth before ordering.
ABC1822
$9.50
ACS294
$125.00
ACS303
$124.95
ACS2711
$34.95
ACS2715
$34.95
$174.95
Tachometer / Operation Meter
Fits: D19 gas, diesel
Replaces: 70236655
IHS697
$16.50
Description / Application
Tachometer / Operation Meter
Fits: D21
Replaces: 70239731
Tachometer / Operation Meter
Fits: D17 diesel
Replaces: 70230062, 70242374
NOTE: Has AC logo.
ACS296
Price
$174.95
Tachometer Cable w/ Metal Sheath
Fits: D17 diesel, D19 diesel
Replaces: 70261604 (cable), 70261608
(key)
(61-1/2" long w/ key)
Threaded nipple fits: D10, D12, D14, (D15
gas, LP, diesel), D17 gas, LP w/ manual
steering, I40, (I60 gas, LP), I400, (I600 gas,
LP), 615 gas, LP, Replaces: 70228769
(3/4"-20 pipe thread to 7/8"-18, 1.413"
long) USA made
NOTE: Zinc dichromate.
Tachometer Drive Adaptor
Fits: D10, D12, D14, D15, D17, I40, I60,
I400, I600, 615 gas, LP, Replaces: 70228768
(1.561" o/a length, 0.095" key width, .302"
O.D.) USA made
2-piece Tachometer Drive Gasket Kit
Fits: D21 thru 220
Replaces: 70246044, 70251845
USA made
Tachometer / Operation Meter
Fits: 190 up to SN: 20599
Replaces: 70243569
NOTE: Tachometer is driven off
camshaft.
Tachometer / Operation Meter
Fits: 190 SN: 20600 & up, 190XT gas,
diesel Serviceable for 180, 185, 200, 210,
220, Replaces: 70252409, 70255036
NOTE: Tachometer is driven off
alternator. Must use w/ 12 & 45 tooth
drive gears.
NEW! Tachometer Cable
Fits: D21, 170, 175, 190, 190XT, 210, 220
(All w/ alternator driven tachometer)
Replaces: 70256526
(64-1/2" long w/ square ends)
NEW! Tachometer / Operation Meter
Cable fits: 180, 185, 200 alternator driven
tachometer; 190, 190XT gas, tachometer
driven off camshaft
Replaces: 70257353
(72-1/2" long w/ square ends)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Electric panels
Price
$44.95
ACS197
$74.95
Instrument Panel
Fits: G
Replaces: 70800124
USA made
Instrument Panel Trim w/ 1/2" swirls
Fits: D15 SN: 9001 & up, D17 SN: 32001 75000, D19
Replaces: 70234433 USA made
NOTE: Stainless steel w/ 1/2" machine
turnings.
$28.50
Electric Box Panel (Rear)
Fits: RC, WC, WF
Replaces: 70208129
Order #
Price
ABC405
$17.95
Description / Application
(2 Gauge, EO = 1/2", L = 13")
ABC1175
$17.30
(2 Gauge, EO = 7/16", L = 14")
ABC421
$22.50
(2 Gauge, EO = 3/8", L = 19")
ABC403
$25.85
(2 Gauge, EO = 7/16", L = 24")
ABC407
$16.99
(2 Gauge, EO = 3/8", L = 10-1/2")
ABC415
$15.40
(2 Gauge, EO = 3/8", L = 12")
ABC413
$19.15
(2 Gauge, EO = 3/8", L = 14-1/2",
90º terminal ends)
ABC1582
$12.15
(2 Gauge, EO = 3/8", EYELET BOTH
ENDS, L = 16-1/4")
ABC417
$18.50
(2 Gauge, EO = 3/8", L = 21")
ABC419
$19.95
(2 Gauge, EO = 3/8", L = 27")
Electrical parts
ACS353
Description / Application
Allis
Chalmers
Order #
ACS338
Battery boxes, parts - USA made cont...
Insulated Battery Cables
Battery boxes, parts - USA made
Order #
Price
ACS063
$82.50
ACS1260
$36.95
Electrical outlet socket, parts
Order #
Price
ABC395
$24.95
ABC1868
ABC2285
$19.95
$4.95
Description / Application
Electrical Outlet Socket
(For Implements w/ lights)
Fits: Allis Chalmers models
(2 pin type)
NOTE: 2 plated brass pins.
Auxiliary Male 2-Pin Connector Plug
(For ABC395)
Replaces: 70227303
(3.045" long, .760" wide, .340" hole dia. for
wires) NOTE: Plated brass pins, wires
must be soldered or crimped.
Electrical Outlet Socket Boot
Fits: Tractors using single wire outlet
NOTE: 1 wire style. Does not fit
ABC395.
ACS029
$77.85
ACS072
$85.75
ACS030
$77.85
Heavy Duty; Straight terminals
unless otherwised noted
L = Length
Order #
Price
Specifications
Ground Cables (Non-Insulated)
ABC401
$13.90
(2 Gauge, EO = 7/16", L = 6")
ABC411
$15.80
(2 Gauge, EO = 7/16", L = 9")
Battery Box w/ Lid
Fits: G, Replaces: 70800626
(Inside dimensions: 7-3/16" wide x 8-3/4"
tall x 9-3/4" long) NOTE: Persian orange
#1 powder coat.
Battery Box Bracket Set (2-Piece)
Fits: G, Replaces: 70800105 (upper),
70800109 (lower)
Battery cables - USA made
EO = Eyelet Opening
Description / Application
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Battery Box w/ Lid
Fits: B, C, CA
Replaces: 70226026
(Inside dimensions: 7-3/16" wide x 8-3/4"
tall x 9-3/4" long)
NOTE: Persian orange #1 powder coat.
Battery Box w/ lid
Fits: RC, WC, WF
Replaces: 70224539
(Inside dimensions: 7-5/8" wide x 8-3/4"
tall x 9-1/8" long)
NOTE: Mounts on side of frame.
Battery Box w/ Lid
Fits: WD, WD45 gas
Replaces: 70224540
(Inside dimensions: 7-3/16" wide x 8-3/4"
tall x 9-3/4" long) NOTE: Persian orange
#1 powder coat. Dash not included;
must re-use old dash.
Battery boxes, parts continue on next page
25
Allis
Chalmers
Electrical parts
Wiring harness kits - USA made cont...
Battery boxes, parts - USA made cont...
Order #
ACS193
ACS195
ACS1509
ACS063L
FDS369
IHS721
Price
$104.95
$89.95
$24.75
$29.95
$23.75
$8.95
Order #
Description / Application
Battery Box w/ Lid
Fits: WD45 diesel
Replaces: 70226951
(Inside dimensions: 9" wide x 8-3/4" tall
x 14-1/16" long)
Battery Box w/ Lid
Fits: D10, D12
Replaces: 70233332
(Inside dimensions: 7-3/16" wide x 8-3/4"
tall x 9-3/4" long)
Battery Box Side Cover
Fits: B, C, CA, D10, D12, D14, D14 AUX,
W226, WD, WD45, Replaces: 70222525
NOTE: Powder coated in Persian Orange
#1.
Battery Box Lid only
Fits: G, B, C, CA, D10, D12, WD, WD45
gas, Replaces: 70210907
NOTE: Powder coated in Persian Orange
#1.
Battery Hold Down
Fits: D17 gas up to SN: 24000 using Group
1 battery, Replaces: 70229487
(9-3/16" long x 7-1/16"wide; Mounting
holes c.c. = 10-1/8") NOTE: 16 gauge
steel. New & improved quality!
Price
$168.50
(For 6-volt generator systems only)
Fits: B, IB SN: 55301 & up, C, CA
w/ cut-out, Replaces: 70225591
ACS2923
$174.95
NEW! (For 1 wire 12-volt alternator)
Fits: B, IB, C, CA
ACS352
$168.50
(For 6-volt generator systems only)
Fits: RC, WC, WF w/ cut-out
Replaces: 70208322
ACS331
$168.50
(For 6-volt generator systems only)
Fits: WD, WD45 gas w/ cut-out
Replaces: 70222532
ACS2925
$174.95
NEW! (For 1 wire 12-volt alternator)
Fits: WD, WD45 gas, LP
ACS2260
$218.50
(For 6 & 12-volt generator systems)
Fits: D14, D15 series I (up to SN: 13000)
gas, Replaces: 70228375, 70230083
ACS2867
$231.50
NEW! (For generator system)
Fits: D15 series II SN: 13001 & up gas
Replaces: 70237839, 70237840
ACS2873
$238.50
NEW! (For generator systems)
Fits: D17 series IV SN: 75001 - up gas
Replaces: 70237724, 70242869, 70242870
Cigarette lighters
NOTE: Anodized aluminum knob engraved w/ the word
"LIGHTER".
Order #
Price
ABC1862
$29.95
IHS949
$29.95
Battery Retainer J-Bolt (Pair)
Fits: Allis Chalmers models
(5/16"-18" UNC x 10-3/4")
Fuse holder
Fits: D10, D12, D14, D15, D17, D19, D21,
180, 185, 190, 190XT, 200, 210, 220
Replaces: 70230246 USA made
Description
Order # Price
Fuse Holder..............................................................ABC389.............. $10.95
NOTE: Rated at 20 AMP; Fits in 1/2" hole.
wires and diagram. Original style braiding
w/ soldered terminals. Restoration quality.
Other harnesses also available by special
order. Call or email for a quote.
Order #
ACS329
26
Price
$128.50
Application
(For 6-volt generator systems only)
Fits: G w/ cut-out, Replaces: 70800136
Description / Application
6-volt Cigarette Lighter w/ Socket
Fits: Early D14 up to SN: 19000 w/ 6-volt
system, Replaces: 70230228
12-volt Cigarette Lighter w/ Socket
Fits: D14 SN: 19001 & up, D17
Replaces: 70232810
NOTE: Original style.
Ignition parts
Order #
Price
ABC498
$14.95
Terminal Insulator Assembly
(Round style) (For Delco distributor)
Fits: G, Replaces: 1847646, 1847647,
1878405 NOTE: Fits distributor
housings w/ .345" dia. round hole.
ABC500
$14.95
Terminal Insulator Assembly
(Square style) (For Delco distributor)
Fits: B, IB, C, CA, D10, D12, D14, D15,
D17, D19, RC, WC, WF, WD, WD45
Replaces: 70225791, 70225792, 70225793,
70225794, 70225795
NOTE: Fits distributor housings
w/ .300" dia. hole w/ keyway.
Wiring harness kits - USA made
NOTE: Wiring harness kits include light
Description / Application
ACS335
Description / Application
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Ignition parts cont...
Price
Description / Application
Order #
Price
Coils / Resistor
$19.95
ABC509
(12-volt)
$19.95
ABC348
ABC366
$57.10
$7.75
Distributor Coil (Metal Housing)
& Mounting Bracket
Fits: Allis Chalmers models
ABC011 Replaces: Delco 1115379, D502,
70247333
ABC509 Replaces: Delco 1115380,
U505, 74514967 NOTE: ABC509 is
internally resisted. See website for full
applications.
HOT" Coil (55000-Volts)
Fits: 12-volt systems
NOTE: Maximum voltage for faster
starting, reduced plug fouling & longer
plug life. Must use w/ ABC366 resistor.
Universal 12-volt Voltage Resistor
(2-Terminal Style)
Fits: Allis Chalmers models
Replaces: 70241266 NOTE: Used to step
down 12-volt battery. Limits voltage
to coil when using 12-volt battery. 1.5
OHMs on 6-volt battery to 4.0 OHMs
for 12-volt battery. Resistor gets very
hot.
Description / Application
Distributor Caps, parts cont...
ABC420
$9.45
Distributor Cap
(For Delco Distributor w/ screw held
cap) fits: 180, 185, 190
Replaces: 74056696, Delco 1960810
ABC556
$2.50
ABC488L
(31/32"
Bracket)
$14.95
ABC488S
(11/16"
Bracket)
$14.95
ABC3007
$22.95
ABC2523
$6.95
ABC511
(6-volt)
$14.45
Electircal parts
ABC011
(6-volt)
Allis
Chalmers
Order #
Ignition parts cont...
Distributor Mounting Gasket
Fits: B, IB, C, CA, RC, WC, WD, WF
Replaces: 70233212
USA made
Bracket Distributor Cap Spring Clip
(For Delco distributor and clip held cap)
Fits: B, IB, C, CA, D10, D12, D14, D15,
D17, D19, G, RC, WC, WD, WD45, WF
Replaces: 70225774, 70225775 (bracket)
(2-1/4" o/a length)
Dust Covers
ABC186
ABC2428
$9.80
$14.85
Dust Cover w/ Felt, Gasket & Washer
(For Delco-Remy w/ clip held cap)
Fits: B, IB, C, CA, D10, D12, D14, D15,
D17, D19, G, RC, WC, WD, WD45, WF
Replaces: 70225734, Delco 1900119
Dust Cover (For Delco screw held cap)
Fits: 170, 175, 180, 185, 190XT
Replaces: 74056699
(3.300" O.D., 1.047" tall, (2) 0.210" screw
holes) NOTE: Fits ABC141, ABC420
caps.
Distributor Clamp
Distributor Caps, parts
ABC276
ABC330
ABC141
$9.50
$11.35
Distributor Cap (For EARLY Delco
Distributor w/ clip held cap thru 1963)
Fits: B, IB, C, CA, D10, D12, D14, D15,
D17, G, H3, RC, WC, WD, WD45, WF
Replaces: 70225733, Delco 811735
Distributor Cap (6-cyl)
(For EARLY Delco Distributor w/
clip held cap) fits: D19, & 6-cylinder
Combines using Delco 824735
Replaces: 74042704
$10.95
NEW! Delco Distributor Shaft Bushing
& Shim Kit fits: B, IB, C, CA, D10, D12,
D14, D15, D17, D19, G, RC, WC, WD,
WD45, WF, Replaces: 70225773, 70225797,
70250977, 74050123 (0.486" I.D., 0.656"
O.D., 2.867" length) USA made
Distributor Hold Down Clamp
(For 3/8" hold down bolt)
Fits: B thru 175 (All w/ distributor)
Replaces: 70225344 NOTE: 2 used per
engine; Sold individually. See website
for additional applications.
Distributor Tags
ABC514
(12-volt)
Distributor Cap (For LATE Delco
Distributor w/ screw held cap)
Fits: 170, 175, Replaces: 74058876
$14.45
Distributor Tag w/ (2) Rivets
(For Delco Remy Distributor)
Fits: Tractors & Industrial
(2.5" long, .800" wide, .150" dia. rivet
hole, 2" c.c. rivet holes) USA made
NOTE: Stamped w/ raised letters.
Customer must stamp numbers.
Ignition parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
27
Allis
Chalmers
Electrical parts
Ignition parts cont...
Ignition parts cont...
Order #
Price
Order #
Description / Application
Price
ACS287
FDS149
ACS228
ABC326
$18.95
$12.50
$15.95
$19.85
ABC2863
$19.85
ACS1548
$34.90
ACS1552
ACS309
ABC1897
28
$35.95
$29.95
$1.45
Spark Plug Wiring Set w/ Straight
Boots (Preassembled) fits: B, IB, C, CA,
D10, D12, D14, D15, D17, RC, WC, WD,
WD45, 170, 175, I-40, I-400, I-60, I-600
(All w/ Distributor), Replaces: 70225613,
70229867 USA made NOTE: Copper
core w/ aluminum coating to prevent
corrosion, waterproof neoprene.
Spark Plug Wiring Set w/ 90º Boots
Fits: G thru 175 4-cyl. models USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
Spark Plug Wiring Set w/ Straight Boots
Fits: 4-cyl. models USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
Spark Plug Wiring Set w/ 90º Boots
Fits: 6-cyl. models
Replaces: 74512808 USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
ABC168
$4.25
Tailored Spark Plug Wiring Set
Fits: B, C, CA (All w/ Distributor)
Replaces: 70225613
(5 wires measure 7-1/4", 9-3/4",
12-1/4", 16-3/4", 13" coil wire)
USA made NOTE: Original type
preassembled, cotton braid w/ copper
wire.
Wire Loom Holder
Fits: G, Replaces: 70800260 (bracket),
70800261 (grommet)
USA made
Spark Plug Wire Grommet
Fits: G
Replaces: 70800261
Fits: B, IB, C, CA, D10, D12, D14, Early
D15, (D17 up to SN: 75000), G, H3, RC,
WC, WD, WF
ABC168 specifications: 14 mm thread, 3/8" reach, 13/16" hex,
Autolite 295, Plug Gap .030
ABC169
$7.20
Fits: K, L, M, U
ABC169 specifications: 7/8" x 18 mm thread, 5/8" reach, 15/16" hex,
Autolite 3076, Plug Gap .030
ABC323
$3.80
Fits: D17 SN: 75001 & up, H4, 170, 180,
190, 190XT
ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex,
Autolite 405, Plug Gap .025
ABC183
$4.25
Fits: UC w/ 14 mm threads
ABC183 specifications: 14 mm thread, 3/8" reach, 13/16" hex,
Autolite 306, Plug Gap .025
ABC171
$5.20
Fits: Some Industrial applications
ABC171 specifications: 18 mm thread, 1/2" reach, 7/8" hex,
Autolite 388, Hot hear range, Std Tip / Resistor, Plug Gap . 030
Ignition Tune-Up Kits
ACS110
$25.95
ABC018
$10.75
NEW! Spark Plug Wiring Set w/ Straight
Boots fits: 6-cyl. models USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
Tailored Spark Plug Wiring Set
Fits: B, IB, C, RC (All w/ Magneto)
Replaces: 70213505
(4 wires measure 7", 9-3/4", 11-1/2",
12-1/2) USA made
NOTE: Original type preassembled,
cotton braid w/ copper wire.
Description / Application
Spark Plugs (Autolite)
Spark Plug Wiring Sets, part
(For Delco Distributor)
Fits: B, IB, C, CA, D10, D12, D14, (Early
D15, Early D17 w/ 3/8" reach), G, H3,
RC, WC, WD, WF (4-cyl. gas)
Replaces: 70243507, 70225736, 9001652
NOTE: Kit contains: Spark plugs, heavy
duty points, condenser & rotor. Spark
Plug Gap .030, Point Gap .020.
(For Delco Distributors w/ clip held cap
thru 1963) fits: All 4-cyl. models; D19
6-cyl. wheel tractor; Combines: A, B, C, E
Replaces: 70243507, 70225736
NOTE: Kit contains: Points, condenser
& rotor. Point Gap .020.
ABC333
$9.10
Ignition Tune-Up Kit (For Delco-Remy
Systems w/ screw held cap)
Fits: 170, 175, 180, 185, 190, 190XT
Replaces: 79001128, 79001168
USA made NOTE: Kit contains: Heavy
duty point set, vibration resistant
condensor & rotor; Point Gap .025
Rotor Button
ABC520
$3.95
(For Delco-Remy Distributor w/ clip
held cap) Fits: B, IB, C, CA, D10, D12,
D14, D15, D17, D19, G, RC, WC, WD,
WD45, WF, Replaces: 70225736, 1921285
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
NOTE: For magnetos w/ 2-piece cap.
The following parts (Sold separately) will fit XH894, XH3001,
XB2065 WICO Magneto:
Order #
FM01
ABC556
FM05
Order #
FM04
FM01
FM02
Price
$26.60
$9.25
FM03
ABC1185
Description / Application
Point Set fits: FM-J, FM-J4-B3, FM-JE,
JM-JG, FM-T,w/ clockwise rotation & 2
piece cap NOTE: Point Gap .020; See our
website for a full application listing.
Condensor fits: FM-J2B6D, FM-JIA, FMJIB, FM-J4B3, FM-2A, FM-2B, FM-4A, FMK, FM-X series (All w/ 2 piece cap)
FM02
$79.95
End Cap fits: FM-J4, FM-J4B3, FM-OX4,
FM-X4B3, FM-B1 (All w/ 2 piece cap)
USA made
FM03
$16.75
Rotor fits: FM-J4, FM-J4B3, FM-JV4, FM4B,
FM-X4B3, FM-ZV4 (All w/ 2-piece cap)
NOTE: Clockwise rotation.
FM05
$85.10
Coil fits: Most multi cylinder FM series,
FMJ2B6D (All w/ 2-piece cap) USA made
ABC556
$2.50
Mounting Gasket fits: Multi cylinder FM
series magnetos, Replaces: 70233212
USA made
ABC1185
$10.65
Price
FXH2100B
$22.45
Points
FXH2024
$15.25
Condensor
FXH2403
$57.50
Coil
FXG2002A-2
$60.15
Cap
FXG1008
$33.95
Rotor
ABC556
$2.50
Mounting Gasket
XHGK
$4.05
Gasket (For cap)
Starters, parts
Order #
Price
Order #
$29.95
ABC1366
$34.95
ABC1179
$20.75
ABC508
$5.35
ABC506
$5.30
Magneto Gasket Set fits: Multi cylinder FM
series magnetos (All w/ 2-piece cap)
USA made
Price
Description / Application
$414.50
Description / Application
Starter Solenoid Relay Assemblies, parts
ABC138
WICO magneto, parts - USA made
XH894
Description
Electircal parts
FM04
Allis
Chalmers
Fairbanks Morse (FM series) magneto parts
Complete Magneto
Fits: B, IB, C, RC, WC, WD, WF, others
Replaces: Fairbanks FM series
12-volt Solenoid Switch (3 Post Saddle
Mount) fits: D10, D12, D14, D15 gas, D21,
I-40, I-400, I-60, I-600, 170
Replaces: 70237136
NOTE: 12-volt systems only.
12-volt Starter Solenoid (4 Terminal)
(For 30, 35 MT series Delco starters)
Fits: D17 w/ starter 1113082, 180 thru 7020
(All diesel), Replaces: 70243828, 79017977
12-volt Starter Solenoid (3 Terminal) (For
Delco Starters) fits: 160 w/starter 1107860,
170, 175 (All diesel); 180, 185, 190 w/
starter 1107356 (All gas); Combines: E3
thru M2 gas, Replaces: 70243857
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 18 NC starter
terminals)
NOTE: Brass.
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 24 NF starter
terminals)
NOTE: Brass.
Starter Rod, Foot / Lever Switch & Levers
MAG6
$14.50
ACS342
$24.95
ABC012
$11.95
Instructions & Parts List (1959) WICO
XH, XHD Magneto Service
FXH2100B
FXH2024
FXG1008
FXH2403
ABC556
FXG2002A-2
XHGK
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Starter Rod
Fits: G, Replaces: 70800110
(21-3/4" o/a length)
USA made
Starter Switch (Saddle Mount)
Fits: B, IB, C, CA, G, RC, WC, WD, WD45
gas, WF, Manual foot switch
Replaces: 70226128
NOTE: Will not fit Autolite starters.
Starters, parts continue on next page
29
Allis
Chalmers
Electrical parts
Starters, parts cont...
Starters, parts cont...
Order #
Price
Order #
Description / Application
Price
Description / Application
Starter Drive Housings, parts cont...
Starter Rod, Foot / Lever Switch & Levers cont...
ACS275
$7.95
Lever (For Push Rod-Type Starter Switch)
Fits: B up to SN: 113778, IB up to SN: 1878,
C, RC, (WC SN: 74330 & up), (WF SN: 1904
& up), Replaces: 70210172
USA made
ABC505
$62.50
ACS277
$7.95
Lever (For Pull Rod-Type Starter Switch)
Fits: B SN: 113779 & up, IB SN: 1879 & up,
CA, G, WD, WD45
Replaces: 70225587
USA made
Original Spring Style Starter Drive
(Bendix) fits: B, IB, C, CA, Delco starters
1107043, 1107046, 1107096; Autolite starter
MAW4031, Replaces: 1880651, 9004839
NOTE: 14 teeth.
ABC458
$39.50
ABC066
$16.40
Manual Starter Switch (Base Mount)
(For 7/8" hole)
Fits: A, IU, K, M, U, UC
Replaces: U879, 23459
(Dash mount for 1-3/4" mounting hole)
NOTE: Will work on 6 or 12 volt.
Original Spring Style Starter Drive (Bendix)
Fits: G w/ starter 1109605, 1109614; Early
D10, D12, D14, WC, WD, WD45 w/ 6-volt
system & starter 1107951, 1107017, 1107466,
1107474, 1107962, Replaces: 9004862
NOTE: 10 teeth.
ABC507
$23.95
Starter Drive Spring only
(For ABC458)
Starter Drive Housings, parts
ACS324
ABC1203
$69.45
$17.95
ABC1939
$17.95
ACS1269
$53.85
ACS1275
30
$52.35
Starter Drive Housing fits: B, IB, C, CA,
Early D10, D12 w/ starter 1107471, D14 gas
w/ starter 1107466, RC, WC, WD, WD45,
WF (All w/ starter 1107006, 1107017,
1107024, 1107043, 1107044, 1107045,
1107046, 1107096, 1107951)
Replaces: 1879156
NOTE: No returns if broken.
Starter Commutator (Brush) Band Cover
(For 4-1/2" O.D. Delco Starter Housing)
Fits: B, IB, C, CA, (D10 up to SN: 3501),
D12 up to SN: 3001, (D14 6-volt only), D15
diesel, RC, WC, WD, WD45 gas, WF
Replaces: 7412626
(1-3/16" wide) USA made
NOTE: Stainless steel.
Starter Commutator (Brush) Band Cover
(For 3-3/4" O.D. Delco starter housing)
Fits: G w/ Delco Starter # 1109605, 1109614
Replaces: 1887889 USA made
NOTE: Stainless steel.
Starter Drive Housing fits: D14 SN: 19001
& up, D15, H3 gas, LP, (All w/ factory 12volt starter 1107558 or 1109388)
Replaces: 70233294, Delco 1948113
(2.575" to center of mounting bolt locating
hole, 3.775" to 1st edge of starter drive gear
opening) NOTE: Dimensions are from
end of nose cone where it bolts to starter.
No returns if broken.
Starter Drive Housing fits: D17, 170,
175 (All w/ starter 1107695, 1109384);
Combines: E, E3, K; Industrials: 616, 622,
801, 802 (All w/ starter 1107695, 1109384)
Replaces: 70231356, Delco 1940960, 1974808
NOTE: 2 bolt. No returns if broken.
IHS132
$44.95
Improved Positive Ratchet Style Drive
(Bendix) fits: Early D10, D12, D14, WC,
WD, WD45, w/ 6-volt system & starter
1107951, 1107017, 1107466, 1107474, 1107962
Replaces: 9004862
NOTE: 10 teeth.
ABC517
$14.45
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
starters (2.955" o/a length, .915" wide, .140"
dia. rivet holes, 2.650" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Customer must stamp numbers.
ABC511
(Black
6-volt)
$14.45
ABC514
(Red
12-volt)
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco
Remy starters (2.5" long, .800" wide, .150"
$14.45 dia. rivet hole, 2" c.c. rivet holes)
USA made NOTE: Stamped w/ raised
letters. Customer must stamp numbers.
ABC233
$12.50
Push / Pull Switches
Starter Push Switch, Extra heavy duty
momentary push button switch
Fits: D15, D17, D19, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, (7000 SN: 4095 & up),
7010, 7020, 7030, (7040 except w/ power
director / shift), 7045, 7050, (7060 except
PD & PS tractors), 7080, 7580, 8010 - 8070,
8550, (Also used as Ether switch on AC
7000, 7030, 7040, 7050), Replaces: 70253322
(Mounting stem 5/8" - 32 thread, 21/32"
long) NOTE: Depress button: ON; Spring
return: OFF. Two screw type terminal.
Up to 35 V (DC), rubber cap for dust and
moisture protection.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
Description / Application
Order #
Universal 2-Position Push / Pull Starter
Switch fits: Ag & Light Industrial
equipment (10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, two
screw type terminals, non-fused. This can
be used on battery ignition systems only.
JDS631
$12.95
Universal 3-Position Fused Push / Pull
Starter & Light Switch fits: Ag & Light
Industrial equipment w/ voltage regulator
NOTE: 15 AMP, five terminals, fused,
7/16-20 stem. 10-24 N.C. black plastic
knob.
ABC489
$14.50
Magneto Push / Pull Ignition Switch
(O.E.M.) fits: Allis Chalmers models
w/ Magneto Ignition, Replaces: 70213140
NOTE: One screw type terminal; Out:
ON; In: OFF.
ACS354
$16.95
KEY1094
$2.05
ABC400
$14.85
Switch Plate
Fits: 170, 175, 180, 185, 200, 190, 190XT, 210,
220 (All diesel), Replaces: 70242398
USA made
Ignition Key (For ACS292)
Fits: (D10, D12 SN: 9001 & up), D17 SN:
75001 & up, 160, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, 6040, 6070, 6080, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060,
7080, 7580, 8550, Replaces: 70241977
USA made
Ignition / Key Switch w/ 2 Keys
Fits: Ag & Light Industrial equipment
(3/4" dia. thread)
NOTE: Four stud type terminals.
Ignition / Key Switches, parts
ABC065
IHS760
ACS288
KEY01
ACS292
$12.95
$19.95
$34.95
$4.50
$19.25
Ignition / Key Switch w/ 2 Keys
Fits: B, C, CA, D14, WD, WD45
Replaces: 70225310
NOTE: 2 wire switch; May have to drill
hole to 0.800" on some applications.
NEW! Ignition / Key Switch w/ 2 Keys
& Mounting Nut fits: B, C, CA, D14, WD,
WD45, Replaces: 225310 USA made
NOTE: 2 spade terminal switch; May
have to drill hole to 0.800" on some
applications.
Ignition / Key Switch w/ 2 Keys
Fits: D10 up to SN: 3500, D12 up to SN:
3000, D14 SN: 9500 & up, D15 up to SN:
9000, D17 up to SN: 75000, D19, D21 (All
using Delco switch), Replaces: 70235785
(.995" dia. threaded end) NOTE: Five
spade terminals. Will fit D10 & D12
w/ newer serial numbers but must use
70227195 washer so switch will fit dash,
NOT available from STP, Inc.
Ignition Key (For ACS288 Ignition Switch)
Fits: (D10, D12 both to SN: 9000), D14 SN:
9500 & up, D15 up to SN: 9000, D17 up
to SN: 75000, D19, D21 (All using Delco
switch), Replaces: 70231713, 72162639
Ignition / Key Switch (O.E.M.)
Fits: Late (D10, D12 Both SN: 9001 & UP)
D15 gas, diesel using Indak switch SN:
9001 & up, D17 SN: 75001 & up, 170, 175,
180, 185, 190, 190XT, 200, 210, 220
Replaces: 70241965 USA made
NOTE: Five spade terminals.
Generator parts
Order #
Price
ABC015
$24.95
ACS1976
$24.95
Description / Application
6-volt Generator Cut-Out Assembly
Fits: B, IB, C, CA, RC, WC, WD, WD45,
WF using original 6-volt 1101357, 1101413
generator, Replaces: 1867781, Autolite
C4012 on models using 6-volt GGR4801
generator NOTE: 15 Amp. Mounting tabs
are parallel w/ cut-out.
Upper Generator Adjusting Bracket
Fits: B, C, CA, IB (SN: 55301 & up)
Replaces: 70210989
ACS1913
$22.50
ABC103
$10.50
ABC1207
$17.95
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Lower Generator Bracket fits: B, C, CA,
(D10 up to SN: 3500), (D12 up to SN: 3000),
D14, (W226 Power Unit SN: 96714 & up
Replaces: 70210990 (6.080" o/a length,
1" wide,0.250" thick, 2 holes = 0.375" O.D.,
2 holes = 0.340" O.D) USA made
Generator Belt
Fits: M, Late U, UC
Replaces: U424
(1/2" wide x 24-1/4" long)
Generator Commutator (Brush) Band
Cover (For 4-1/2" O.D. Delco Generator
Housing) fits: B, IB, C, CA, RC, WC, WD,
WD45, WF, Replaces: 1872638
(1-5/8" wide) USA made
NOTE: Stainless steel.
Generator parts continue on next page
31
Electircal parts
$8.20
Description / Application
Ignition / Key Switches, parts cont...
Push / Pull Switches cont...
ABC398
Price
Allis
Chalmers
Starters, parts cont...
Starters, parts cont...
Allis
Chalmers
Electrical parts
Alternators, parts
Generator parts cont...
Order #
Price
ABC519
$14.45
ABC511
(6-volt)
$14.45
ABC514
(12-volt)
$14.45
NEW not rebuilt • To convert 6-volt to 12-volt system.
Description / Application
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
generator (2.300" o/a length, .732" wide,
.145" dia. rivet hole, 2" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Customer must stamp numbers.
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco
Remy generator
(2.5" long, .800" wide, .150" dia. rivet hole,
2" c.c. rivet holes)
USA made NOTE: Stamped w/ raised
letters. Customer must stamp numbers.
Voltage regulators
Order #
Price
Description / Application
ABC153
$32.95
6-volt (4 Terminal) Voltage Regulator
(Saddle Mount) fits: B, IB, C, CA, WC,
WD, WD45 gas, WF using Delco 1101357,
1101413 or 1101414 generators when used
w/ ABC188 Voltage Resistor Kit
Replaces: 74514722 NOTE: Provides 2-unit
positive ground generator mounted
regulator.
ABC188
$45.55
Voltage Regulator Conversion Kit
Fits: B, IB, C, CA, WC, WD, WD45, WF
NOTE: Used w/ ABC153 Voltage
Regulator when replacing Delco-Remy
cut-outs 1116766, 1116807, 1116809 or
1116816 & updating your generator
system.
ABC152
$32.95
ABC185
$32.95
ABC1148
$28.95
32
Order #
Price
ABC535
$149.95
ABC2315
$34.95
Description / Application
MINI 41 AMP Maximum Alternator
w/ Pulley & Diode
Fits: Allis Chalmers models requiring a
smaller dia. alternator for clearance
(4-1/2" housing dia., 2-1/2" pulley dia.,
3/8" belt width) NOTE: For 12-volt
negative ground systems only. This
alternator has a built in 3 wire regulator,
that requires an excitation circuit.
Includes instructions.
Alternator Pulley (For ABC535)
(0.587" ID, 1.437" o/a length, 3" pulley
O.D., 5/8" belt width)
USA made
ABC418
$99.95
ABC1426
$19.95
63 AMP Alternator w/ Pulley
Fits: Allis Chalmers models
(6-1/4" housing dia., 2-1/2" pulley dia.,
5/8" belt width) NOTE: For 12-volt
negative ground systems only. Must rev
engine to 800 - 850 RPM in order to self
excite. Simple 1-wire alternator Hook Up:
Run a wire from alternator through amp
gauge to positive side of battery!
Pulley only (For ABC418)
(.670" shaft dia., 3-3/16" pulley O.D.,
1/2" belt width)
6-volt (4-Terminal) Voltage Regulator (Base
Mount)
Fits: D10 up to SN: 3501, D12 up to SN:
3001, D14 up to SN: 19001 using Delco
1100025 generator, Replaces: 70228365,
Delco 1119575
12-volt (4-Terminal) Voltage Regulator
(Base Mount)
Fits: D10, D12 SN: 3501 & up, D14 SN:
19001 & up, D15 gas, D17 gas, diesel, D19
gas, diesel, Replaces: 70229484, 70236680
NOTE: For 12-volt generator system.
12-volt (4-Terminal) Voltage Regulator
(Base Mount)
Fits: D21, 170, 175, 180, 190, 190XT gas,
diesel; 210, 220 diesels; 160, 185, 200 (All
w/ factory alternators)
Replaces: 72072955
For negative ground systems.
ABC495
$19.95
Pulley only (For ABC418)
(.670" shaft dia., 2-1/2" pulley O.D.,
5/8" belt width)
ACS2347
$49.95
ACS2352
$59.10
Alternator Bracket Kit
Fits: B; (Serviceable for C, CA, but must
trim 1" off lower end of adjustment
bracket & redrill hole to clear draglink); IB,
(lower bracket only fits D10, D12, D14)
USA made NOTE: Use w/ ABC418
alternator & w/ existing belt.
Alternator Bracket Kit
Fits: WC, WD, WD45, WF gas, LP
USA made
NOTE: Use w/ ABC418 alternator.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ABC404
$34.95
$23.50
Universal Mounting Kit
Fits: Allis Chalmers models
NOTE: Does not include the top
adjusting bracket. Used when switching
from a generator to an alternator. May
have to be drilled or modified for your
application.
Universal Top Adjusting Bracket
Fits: Allis Chalmers models
(7/8" wide, 1-1/2" offset, 8-1/4" from
farthest end of slot to center of mounting
hole, 3-3/4" slot length, 3/8" mounting
hole) NOTE: Customer may need to trim
to fit some models.
Order #
Price
ACS1098
$15.95
ABC398
$8.20
Universal 2-Position Push / Pull Light
Switch fits: Ag & Light Industrial
equipment (10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, Two
screw type terminals, non-fused.
JDS631
$12.95
Universal 3-Position Fused Push / Pull
Starter & Light Switch
Fits: Allis Chalmers models w/ voltage
regulator NOTE: 15 AMP, five terminals,
fused, 7/16-20 stem. 10-24 N.C. black
plastic knob.
Light switches, parts
Order #
IHS950
ACS139
ABC425
Price
$14.50
$39.95
$4.95
ABC367
$4.95
ACS290
$28.50
Description / Application
Field Resistor on Light Switch
Fits the following using the original switch
(208197) and cut-out system: B, IB, C, CA,
G, RC, WC, WF, WD, WD45 gas up to SN:
201241
3-Position Light Switch, (Hi-Lo-Charge)
(Hi charge w/ lights)
Fits: B, C, CA, G, RC, WC, WD, WD45, WF
(All w/ cut-out on generator)
Replaces: 70208197
(10-32 thread) NOTE: Three screw type
terminals, .800" dia. threaded stem.
Knob only (Says "LIGHTS")
(For ACS139 Switch)
(10-32 thread)
Knob only (Plain Face)
(For ACS139 Switch)
(10-32 thread)
2-Position Light Switch (O.E.M.)
Fits: D10, D12, D14, D15, D17, D19, D21,
190, 190XT, Replaces: 70234409
NOTE: Two spade terminals.
ACS1096
$32.50
Description / Application
Light Switch Plate
Fits: 160, 170, 175, 180, 185, 190, 190XT, 200,
210, 220, 6040, Replaces: 70249141
USA made
Headlights, parts
Need light components? See pg. 35
Order #
ACS165
Price
Description / Application
$84.95
6-volt Complete Headlight Assembly
Fits: G
Replaces: 70800128
ACS333
$27.50
ACS152
(6-volt)
$49.50
ACS205
(12-volt)
$49.50
ACS150
$49.50
Light Switch w/ Knob (O.E.M.)
Fits: 160, 170, 175, 180, 185, 190, (190XT SN:
19001 & up), 200, 210, 220, 6040
Replaces: 70249142
USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Headlight Bracket
Fits: G
Replaces: 70800117
Complete Headlight Assembly
Fits: B, IB, C, CA, (Late U, UC, UI using
4-3/4" dia. lights)
Replaces: 70210921, 70210922
(1/2" dia. stud)
6-volt Complete Headlight Assembly
Fits: RC, WC, WF, WD, WD45
Replaces: 70236969
Headlights, parts continue on next page
33
Electircal parts
ABC529
Description / Application
Light switches, parts cont...
Allis
Chalmers
Alternators, parts cont...
Allis
Chalmers
Electrical parts
Dash light, parts
Headlights, parts cont...
Fits: D10, D12, D14, D15, D17, D19, D21,
170, 175, 180, 185, 190, 190XT, 200, 210, 220,
I-40, I-400, I-60, I-600
ACS273 Replaces: 70234404
(.658" dia., 1" c.c. mounting holes)
JDS589CH Replaces: 70234357
(1-1/4" dia)
Need light components? See pg. 35
Order #
FDS193
Price
Description / Application
$49.95
12-volt Complete Sealed Beam Headlight
Assembly Serviceable for D15 up to SN:
9001, D17 up to SN: 42001, H3, HD3
Replaces: 70229915
(5-3/4") NOTE: Mounts to side of grille &
not to fender. Serviceable = not exact of
original.
ABC525
ACS273
ABC345
JDS589CH
Description
Order # Price
12-volt Chrome Dash Light Assy........................ ACS273............... $29.95
$45.95
12-volt Bulb............................................................. ABC345.............. $1.80
Chrome Dash Light Cover only.......................... JDS589CH......... $15.45
NEW! 12-volt Sealed Beam Headlight
Assembly fits: D21
Replaces: 70239803
(4-1/2", 1-1/8" stud length)
Tail lights, parts
Need light components? See pg. 35
Order #
JDS581
$44.95
JDS582
$44.95
(Lo Beam)
(Hi Beam)
JDS676
IHS647
MFS108
$18.15
$34.95
Sealed-Beam Headlight Assembly
(For Flat Top Fenders)
Fits: 170, 175, 180, 185, 190, 190XT, 200, 210,
220
JDS581 Replaces: 70249146
JDS582 Replaces: 70249147
(4-1/2")
Clamp Ring w/ Screw
(For Sealed Beam Lights)
Fits: Late 190XT, (D14 SN: 19001 & up),
D15, D21, 160, 170, 175, 180, 185, 190, 200,
210, 220, 6040, 7030, 7050
Replaces: 70230233
(4-1/2")
12-volt Sealed Beam Headlight Assembly
(For Flat Top Fenders)
Fits: 190XT, 170, 175, 180, 185, 190, 200, but
not like original; 6040, 6060, 6080, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060,
7080, Replaces: 70267185
(4-1/2") NOTE: Post is out of back
w/ wires thru post.
$18.95
Light Visor
Fits: D10, D12, D15 (All SN: 9001 & up);
D17 SN: 42001 & up, D19
Replaces: 70236352
34
Price
ACS264V6
(6-volt)
$42.50
ACS264V12
(12-volt)
$42.50
JDS603
(6-volt)
$49.95
JDS606
(12-volt)
$49.95
ACS355
$96.95
ABC3154
$34.95
Description / Application
Bullet Style Tail Light Assembly
Fits: G, B, C, CA, (D10, D12 both up to
SN: 9001), (D14 up to SN: 19000), WD,
WD45, Replaces: 70228377
Tail Light Assembly w/ Copper Ground
Strap fits: RC, WC SN: 74330 & up, WF
SN: 1904 & up
Replaces: 70237100
(4-3/4" Curved lens; 1-1/2" stud length)
12-volt Sealed Beam Combo Tail Light
Fits: D10, D12, D15 SN: 9001 & up, D17
SN: 42001 & up, D19, D21, 190 up to SN:
19000 & 190XT up to SN: 19000
Replaces: 70240895
(4-3/4")
NEW! 'Hobbs' Rear Combo Light
Fits: Tractors & equipment using rear
12-volt combo light w/ stud post out
back & dash mounted light switch
USA made NOTE: New old stock, paint
is blemished.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
IHS899
Price
$19.95
ABC345
ABC544
$1.80
Description / Application
12-volt Sealed Beam Combination
Rear Light Bulb w/ transparent red
background using separate bulb
Fits: ACS355 & ABC3154 combo tail
lights, Replaces: 70250301, 4409
(4-1/2")
12-volt Bulb
NOTE: Installs behind IHS899.
$17.15
12-volt Fender & Cab Warning Light
Serviceable for D21 thru 7080 (All using
round warning light)
Replaces: 70248110
(4" dia.) NOTE: 2 amber lenses, double
contact bulb & black die cast base
ABC1439
$3.45
6-volt Bulb only
(For ABC544)
ABC546
ABC1243
$26.50
12-volt Fender & Cab Warning Light
Serviceable for Allis Chalmers models
(All using rectangular warning light)
NOTE: 1 amber lens, 1 red lens, amber
side marker, single contact bulb &
black ABS base.
$4.95
Amber Lens only
(For ABC546)
ABC548
ABC1439
$9.95
12-volt Round Tail Light Assembly
w/ License Lamp Window
Fits: Allis Chalmers models
(4" dia.; 2 stud mount, 1-7/8" c.c. studs)
NOTE: Red lens, black ABS base.
$3.45
6-volt Bulb only
(For ABC548)
ACS220
(Lens)
$20.75
ACS245
(Gasket)
$2.95
ACS220
ACS245
Order #
Price
Description
The light components below fit ACS150, ACS152, ACS165,
ACS205, JDS603, JDS606:
IHS475
$6.00
Light Terminal (For JDS603 & JDS606 only)
IHS352
$14.50
Lens (Dimpled Outer Surface) w/ Guide Name
ABC388
$14.50
Lens (Smooth Outer Surface) w/ Guide Name
IHS353B
$14.45
Black Ring (Bezel)
ABC560
$4.10
Seamless Gasket
IHS355
$3.85
Gasket
IHS354
$3.00
6-volt Bulb
IHS436
$2.95
12-volt Bulb
ABC320
$10.95
Reflector (For Head & Work Lights)
ABC378
$19.95
Reflector (For Tail Lights w/ Red Jewel Lens
& 12-volt Bulb in Jewel Lens)
IHS474
$14.95
Jewel Lens w/ Base & 6-volt Bulb
ABC1115
$14.95
Jewel Lens w/ Base & 12-volt Bulb
ABC342
$1.80
Light Bulb (For 6-volt Jewel Lens)
ABC343
$1.80
Light Bulb (For 12-volt Jewel Lens)
ABC541
$18.70
Combo Light Switch w/ Lever Style Knob
ABC536
$6.50
Lever style Plastic Knob
Electircal parts
Rear view
Light components
Allis
Chalmers
Tail lights, parts cont...
The light components below fit ABC525, ACS355, IHS647,
JDS581, JDS582:
IHS475
$6.00
Light Terminal
JDS676
$18.15
Clamp Ring w/ Screw (Except for IHS647)
ABC3028
$12.50
NEW! Hobbs Rubber Light Bezel
(For IHS647 only) NOTE: See insert A.
ABC527
$5.95
Concaved Mounting Washer
ABC353
$7.50
12-volt Sealed Lo-Beam Bulb 4411
ABC460
$16.50
12-volt Sealed Hi-Beam Bulb 4410
IHS899
$19.95
12-volt Sealed Beam Combination Rear Light
Bulb (For ABC525)
ABC345
$1.80
12-volt bulb (Fits behind IHS899)
ABC541
$18.70
Combo Light Switch w/ Lever Style Knob
ABC536
$6.50
Knob only
The light components below fit ACS264V6, ACS264V12:
ACS123
$14.95
Lens
OLS071
$9.95
Trim Ring
OLS072
$2.00
Gasket
ABC1979
$1.45
Base Gasket (For Bullet Tail Light)
ABC344
$1.80
6-volt Bulb
ABC345
$1.80
12-volt Bulb
Tail Light Lens w/ Guide Name or
Gasket fits: D14 SN: 19001 & up, D15
to SN: 9001, D17 gas up to SN: 42001 &
diesel up to SN: 38964
ACS220 Replaces: 70229795
(2-9/16" O.D.) USA made
NOTE: Red plastic.
ACS245 Replaces: 70229796 USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
35
Allis
Chalmers
Chassis parts
Hand cranks, parts
Emblems
Order #
Price
ACS135
$29.95
ACS138
ACS218
$29.95
$58.50
Description / Application
Orange Front Grille Emblem
Fits: D10 up to SN: 1950, D12 up to SN:
1950, D14 up to SN: 19000, D17 up to SN:
24000; Combines: A2, C, E, E3, F, K, Lawn
& Garden: 116, 122, 616, 622
Replaces: 70228474
NOTE: Die cast, chromed, painted.
Orange used through mid 1959.
Creme Front Grille Emblem
Fits: D10 SN: 1951 & up, D12 SN: 1951 &
up, D14 SN: 19001 & up, D15, (D17 SN:
24001 & up), D19, D21, ED40; Combines:
A2, C, E, E3, F, K, Lawn & Garden: 616, 622
Replaces: 70233852
NOTE: Die cast, chromed, painted.
Creme used from mid 1959 to approx.
1965 then used ACS218.
Front Grille Emblem w/ Decal
Fits: Late D10, D12, D15, D17, D21, ED40,
EIII Gleaner Combine (Appx. 1965 & up)
Replaces: 70246724
USA made
NOTE: Die cast, chromed.
ACS247
$73.50
Side Nameplate (Emblem)
Fits Ag: D10, D12, D15, D17 (1961-63)
Replaces: 70233854
(3" wide x 29" length)
NOTE: Creme background w/ black
lettering. 2 required per tractor; Sold
individually. Rivets & clips not included.
ACS248
$73.50
Side Nameplate (Emblem)
Fits Industrial: D10, D12, D15, D17, I-40,
I-400, I-60, I-600, 616, 622, 801, 802 (196163), Replaces: 70242700
(3" wide x 29" length)
NOTE: Black background w/ polished
aluminum lettering. 2 required per
tractor; Sold individually. Rivets & clips
not included.
ACS1567
JDS630
36
$0.95
$0.45
Rivet only (For ACS247, ACS248 Side
Nameplates) fits: D10, D12, D15, D17, I40,
I60, I400, I600, 616, 622, 801, 802
Replaces: 70234173 USA made
NOTE: 7 required per nameplate;
Sold individually.
Push Clip only
(For ACS247, ACS248 Side Nameplates)
NOTE: 7 required per nameplate;
Sold individually.
Order #
Price
ACS133
$44.50
ACS133B
$22.50
ACS350
$44.50
ACS1698
$59.50
Description / Application
Hand Crank w/ Spinner
Fits: G
Replaces: 70800646
USA made
Hand Crank Bracket
Fits: G
Replaces: 70800068
USA made
Hand Crank w/ Spinner
Fits: B, C, CA
Replaces: 70207893
USA made
Hand Crank w/ Spinner
Fits: WC, WD, WD45, WF, RC
Replaces: 70216933
USA made
ACS096
$14.50
Hand Crank Holder / Brackets
Fits: RC, WC, WD, WD45, WF
Replaces: 70208443 (front clip), 70220855
(rear clip)
Crank hole casting
Fits: G
Replaces: 70800086
Description
Order # Price
Crank Hole Casting.............................................. ACS058............... $22.95
Grille mounting tabs
Fits: WC, WD, WD45
USA made
ACS1117
Description
ACS1121
Order # Price
LH Grille Mounting Tab...................................... ACS1117............. $26.45
RH Grille Mounting Tab..................................... ACS1121............. $26.45
NOTE: Bare metal. Must weld to existing grille. Sold individually.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
Application
ACS203 $22.50
Side panels - USA made
Order #
Price
$79.95
ACS145
(LH)
$45.95
Fits: B, IB, C, CA
(16" x 17")
NOTE: 1 used per tractor.
ACS204 $18.50
Fits: RC, WC SN: 74330 & up, WD, WD45,
(WF SN: 1904 & up)
(9-1/4" x 19-1/4")
NOTE: 2 used per tractor; Sold individually.
ACS146
(RH)
$45.95
18 gauge, primed, heavier than originals! Fit to tractor before
painting.
ACS142
Price
Description / Application
$198.50
Hood
Fits: G, Replaces: 70800089
NOTE: Heavier than original 20
gauge factory hood.
ACS153S
$349.95
Hood (4 Hole) w/ Small (2-1/2")
Exhaust Hole
Fits: B, C, Replaces: 70225260
NOTE: Works w/ ACS101 muffler.
ACS153L
$349.95
Hood (4 Hole) w/ Large (4")
Exhaust Hole
Fits: B, C, CA gas
Replaces: 70225260
NOTE: Works w/ ACS103 muffler.
ACS177
Side Panel
ACS145 (LH) Fits: D10, D12 (both up to
SN: 9001), Replaces: 70231587
ACS1511
(RH)
$39.40
ACS1513
(LH w/
choke slot)
$43.95
ACS1515
(LH w/out
choke slot
$43.95
ACS1517
(RH)
$43.95
ACS1519
(LH)
$46.65
ACS1521
(RH, 2-pc)
$54.65
ACS1511 (RH) Fits: D10 up to SN: 3500,
D12 up to SN: 3000
Replaces: 70231586
Side Panel
ACS1513 (LH) Fits: D14 up to SN: 19000,
D15 series I up to SN: 9000, I60, I600 gas,
diesel, Replaces: 70233497
Side Panel
ACS1515 (LH) Fits: D14 SN: 19001 & up,
D15 series II SN: 9001 & up
Replaces: 70232326
ACS1517 (RH) Fits: D14, D15, I60, I600
gas, diesel
Replaces: 70232327
$425.95
Hood
Fits: WD, WD45 gas, Styled WC SN:
74330 & up, Styled WF SN: 1904 &
up, Replaces: 70220616
ACS179
2-piece Side Panel Set
LH Fits: D10, D12 (both up to SN: 9001),
RH Fits: D10 SN: 3501- 9000, D12 SN:
3001 - 9000, Replaces: 70231587 (LH),
70236019 (RH)
ACS146 (RH) Fits: D10 SN: 3501- 9000,
D12 SN: 3001 - 9000
Replaces: 70236019
Hoods - USA made
Order #
Description / Application
Chassis parts
ACS147
Allis
Chalmers
Replacement grille screens - USA made
$499.95
Hood
Fits: WD45 diesel
Replaces: 70226960
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Side Panel
ACS1519 (LH) Fits: D17;
Industrials: 616, 622, 801, 802 gas, LP
Replaces: 70232149
NOTE: Series I & II
ACS1521 (RH) Fits: D17 gas, LP up to
SN: 42000 (Will fit diesel if trimmed)
Replaces: 70237188
NOTE: Series I & II
37
Allis
Chalmers
Chassis parts
Air cleaner parts cont...
Air cleaner parts
Order #
Price
Order #
Description / Application
Price
ACS062
ACS065
ACS061
ACS226
IHS283
ABC422
$19.95
$19.95
$19.95
$29.95
$47.05
$12.95
Air Cleaner Cap
Fits: B, IB, C, Early CA, (G - thru hood), RC
Replaces: 70208299
(1-1/4" base I.D.)
Air Cleaner Cap
Fits: Late CA, D10, D12, D14
Replaces: 70242072
(1-5/8" base I.D.)
FDS081
$10.30
Clamp
(For FDS034 Cup)
Replaces: 70225858
Pipes, parts
Air Cleaner Cap
Fits: D15, WC, WD, WD45, WF
Replaces: 70208222
(1-3/4" base I.D.)
Air Cleaner Cap
Fits: D17 gas up to SN: 42000, D17 diesel up
to SN: 38963, WD45 diesel
Replaces: 70226926
(2.275" base I.D.)
Air Cleaner Cap
Fits: D17 gas SN: 42001 & up, D19 gas
Replaces: 70235918
(2-1/4" I.D., 2-3/8" O.D.)
USA made
ACS117
$54.50
ACS340
$18.50
Air Cleaner Pipe Bracket
Fits: G
Replaces: 70800142
USA made
ACS284
$12.50
Air Cleaner Pipe Grommet
Fits: 210, 220, 7000, 7010, 7020, 7030, 7040,
7045, 7050, 7060, Replaces: 70267859
(4" I.D., 5-1/16" O.D.)
$18.50
IHS181
$9.95
Air Cleaner Oil Bath Filter Element
Fits: Allis Chalmers models
(3" wide x 78" long) NOTE: Replaces the
mesh in existing air cleaners. Sold by
the bag (usually 2 required for B - D14; 3
required for WC - WD).
ACS115
$25.00
FDS034
$14.95
38
Air Cleaner Oil Cup (Clamp-Style)
Fits: B, IB, C, CA, RC
Replaces: 70225818
(4" I.D.; 4-7/16" O.D.)
NOTE: Used on engine SN: CE13732 & up.
Air Cleaner Oil Cup Clamp
(For ACS047)
Replaces: 70225817
ACS208
$2.55
Air Cleaner Hose
Fits: G, Replaces: 70800141
(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long)
NOTE: 2 used per tractor;
Sold individually.
ACS1722
$10.95
Air Cleaner to Carb Hose
Fits: WC SN: 74330 & up, WD, (WF SN:
1904 & up), Replaces: 70208114
(1-1/2" I.D. both ends) USA made
ACS1719
$18.95
Air Cleaner to Carb Hose fits: WD45 gas,
W226 Power Unit (both SN: 96714 & up),
Replaces: 70226266 (1-7/8" I.D. both ends,
8-7/16" outside curved length)
ABC492
$2.70
Clamp
(For 1-5/8" O.D. ACS208 Air Cleaner Hose)
Fits: G
Replaces: 911290
FDS258
$3.60
Air Cleaner Hose Clamp
(For 1-3/4" to 2" O.D. Hose)
Fits: B, C, CA, D10, D12, RC, WC, WD, WF
Replaces: 921912, 921913
ABC2443
$22.50
Air Cleaner Oil Cup
Fits: G
Replaces: 70800760
Air Cleaner Oil Cup (Clamp-Held)
Serviceable for Early D10 up to SN: 3501,
Early D12 up to SN: 3001, D14
Replaces: 70228478 (4-3/4" O.D. at lip,
4-15/32" I.D., 3" high) NOTE: Looks
slightly different, but works great.
Air Cleaner Pipe
Fits: G
Replaces: 800147
NOTE: If hoses are needed order (2)
ACS208 hose.
Hose, Clamps
Oil Cups, parts
ACS047
Description / Application
Oil Cups, parts cont...
Caps, parts
Miscellaneous
NEW! Dust Unloader Valve
(Vacuator Valve) (For Dry Air Cleaners)
Fits: D15 diesel, (D17 gas SN: 42001 & up),
(D17 diesel SN: 38964 & up), D19 gas, diesel
Replaces: 70235884 (1" I.D.)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ABC1824
$49.95
ABC512
$74.95
Pre-Cleaner Cap Assembly
Fits: D15 diesel up to SN: 9000; Serviceable
for ED40 & others using 2" I.D. base &
5-1/2" bowl, Replaces: 74016565
(2" I.D. plastic base, 5-1/2" pre-cleaner
O.D.) USA made
Pre-Cleaner Cap Assembly
Fits: D17 Gas and other models
w/ 2-1/4" I.D. base & 7" bowl
Replaces: 70257382, 70234832
USA made
Order #
ABC338
$13.95
(For 7" bowl) fits: D17 gas to SN: 42001,
diesel up to SN: 38964 & A thru F2
combines, Replaces: 71125803
(Bowl O.D. at top = 7)
NOTE: Green metal.
ABC470
ABC510
ABC554
ABC484
$99.95
$39.95
$64.60
$42.95
$24.95
Pre-Cleaner Cap Assembly w/ Brass Nut
Fits: Combines; K2 diesel, F2, (G, L, M gas)
w/ 3" I.D. base & 7" bowl
Replaces: 1306480
(3" I.D. base)
NOTE: Powder-coated green.
Pre-Cleaner Cap Assembly
Fits: Combines; K2 diesel, F2, (G, L, M gas)
w/ 3" I.D. base & 7" bowl
Replaces: 1306480
(3" I.D. base)
Pre-Cleaner Cap Assembly
Fits: D21, (190, 190XT diesel), 200, 210, 220,
7000 thru 7050 w/ 4" I.D. base & 10-1/2"
bowl, Replaces: 70249775
Pre-Cleaner Cover w/ Brass Knurled Nut
Fits: D15 diesel up to SN: 9001, HD3, I-60,
I600 diesel (All w/ 5-1/2" bowl)
Replaces: 70233662, 1127421
(5-7/16" I.D.) USA made
NOTE: Aluminum.
$68.95
Pre-Cleaner Base
(For ABC338 Bowl & JDS559 Top)
Fits: Combines; K2 diesel, F2, (G, L & M
gas) w/ 3" I.D. base & 7" bowl
NOTE: Metal. Check size before ordering.
JDS561
$75.00
Pre-Screener (Metal) w/out Screen
Fits: All Donaldson Pre-Cleaners
w/ 3" O.D. pipe
NOTE: Powder coat green.
JDS535
$39.95
JDS938
$4.95
Screen w/ Clip & 2 Springs
(For Pre-Screener)
Fits: JDS561 Pre-Screener and Gleaner
combines F, G, L gas w/ 7" dia. pre-cleaner
bowl, Replaces: 71141353
(5-1/4" tall x 19-3/8)
NOTE: Powder coat green.
Pre-Screener Clip & Springs Kit
(For JDS535 Screen)
NOTE: Powder coat green.
ABC339
Pre-Cleaner Bowl
Fits: D15 diesel up to SN: 9001, HD3, I-60,
I-600 diesel (All w/ 5-1/2" dia.)
Replaces: 70233663
NOTE: Clear plastic.
ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at
bottom = 5", Cone I.D. at top= 2-7/16", Bowl side height= 2-7/16",
Overall height =3-9/16"
Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet
Fits: D17 gas to SN: 42001, diesel to SN:
38964 & A thru F2 combines
Replaces: 71125804
ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3",
Cone I.D. at top = 3-1/2", Overall height = 4-1/8"
Pre-Cleaner Cap Assembly
Fits: Allis Chalmers models
w/ 2-1/2" I.D. base & 7" bowl
USA made
JDS741
Description / Application
$24.95 Pre-Cleaner Cover w/ Brass Nut
JDS557
$74.95
Price
JDS559
$16.95
Pre-Cleaner Bowl (10-1/2" dia.)
(For 3" to 4" inlet)
Fits: D21, 170, 175, 180, 185, 190, 190XT,
200, 210, 220, 6060, 6070, 6080, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060;
Combines: G, L (D2900), L2 (D2900), 649I;
649T, M, M2 (D2900) all Diesels
Replaces: 70651270, Can replace Donaldson
P01-6330 NOTE: Clear plastic.
ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height
= 3", Cone I.D. at top = 5-9/16", Overall height = 4"
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
39
Chassis parts
ABC383
Description / Application
Pre-cleaner assys., parts cont...
Allis
Chalmers
Pre-cleaner assys., parts
Allis
Chalmers
Chassis parts
Fuel tank, parts
Order #
ACS158
ABC2672
Price
$404.68
$124.95
ABC494
$3.95
ABC1823
$4.95
ABC1656
$5.25
ABC1827
$5.50
Fuel caps w/ gasket, parts cont...
Order #
Description / Application
IHS226
Fuel Tank (Steel)
Fits: G
Replaces: 70800070 USA made
NOTE: Sealed w/ Red Kote® fuel tank
liner.
Price
Underside view
Fuel Tank Filler Neck Straightening Tool
w/ Instructions fits: A, (D17 Early using
buy clean fuel cap), M, U, UC, (Unstyled
WC, WF up to SN: 2045) USA made
NOTE: Used to straighten bent filler
necks & filler neck tabs to make the cap
seal properly (not for use with tanks
using baffled filler necks). This part is a
duplicate of the factory service tool that
works in many applications using the
ABC1880, IHS226, IHS416 & JDS416 caps.
Fuel Tank Webbing fits: Tractors using
webbed insulation between fuel tank
mounts & other sheet metal parts
(3' L x 1" wide x .042" thick) USA made
NOTE: Economy black woven nylon. Can
be glued or riveted.
Fuel Tank Webbing fits: Tractors using 1"
wide webbing for fuel tanks & other sheet
metal parts (3' L x 1" wide x .050" thick)
NOTE: Black canvas, mildew resistant.
Sold in 3-foot length.
Fuel Tank Webbing fits: Tractors using
1-1/2" wide webbing for fuel tanks & other
sheet metal parts (3' L x 1-1/2" wide x
.050" thick) NOTE: Black canvas, mildew
resistant. Sold in 3-foot length.
Fuel Tank Webbing fits: Tractors using 2"
wide webbing for fuel tanks & other sheet
metal parts (3' L x 2" wide x .050" thick)
NOTE: Black canvas, mildew resistant.
Sold in 3-foot length.
ABC1880
(Top vented)
$9.95
ACS172
Price
$19.95
IHS239
$1.95
IHS2642
$1.95
Gasket only (For IHS226, ABC1880 Caps)
Replaces: 70208065
(2.580" O.D., 1.900" I.D., .095" thick)
USA made
NOTE: Rubberized cork.
MHS043
$9.95
Fuel Cap (Vented) w/ MHS043GK Gasket
Fits: D10, D12, D14, D15, D17, D19,
I-40, I-400, I-60, I-600, 170, 175, 180, 185;
Serviceable for B, C, CA, G, IB, RC, Styled
WC, WD, WD45, WD45 diesel, WF
Replaces: 70253690 (2-7/8" O.D.)
Underside view
MHS043GK
$1.50
ACS336
$18.95
Underside view
ABC1221
$4.95
Underside view
IHS338
$9.95
Underside view
40
Description / Application
Fuel Cap w/ Gasket
Fits: G, B, IB, C, CA, RC, Styled WC, WD,
WD45, WD45 diesel, Styled WF
Replaces: 70207244
NOTE: For gasket only use MHS043GK.
Auxiliary Tank Fuel Cap w/ Gasket
Fits: B, C, CA, D14, D17, U, WC, WD,
WD45, WF, Replaces: 70204827
USA made
Vented Fuel Cap w/ IHS239 Gasket &
Splash Guard (Says "Buy Clean Fuel Keep It Clean")
Fits: 'A', 'M', U, UC, Unstyled WC,
Unstyled WF
IHS226 Replaces: 70206622
ABC1880 Replaces: 70206622
(2-11/16" ID, 1.118" height (cap only))
Underside view
Fuel caps w/ gasket, parts
Order #
Description / Application
$9.95
Gasket only (For IHS226, ABC1880 Caps)
Replaces: 70208065
(2.563" O.D., 1.875" I.D., .125" thick)
NOTE: NBR rubber.
Gasket only (For ACS172)
(2.622" O.D., 1.500" I.D., 0.100" thick)
USA made
NOTE: Rubberized cork gasket.
Fuel Cap w/ Gasket
Fits: D21, 190, 190XT, 200, 210, 220, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060,
7080, 7580, 8550, Replaces: 70262788,
70254013
(3.475" O.D.)
Gasket only (For ACS336 cap)
Replaces: 70271531
(2.242" I.D., 2.948" O.D.)
USA made
NOTE: Rubberized cork.
Sediment bowl assys., parts
Order #
Price
ACS326 $29.95
Description / Application
Sediment Bowl Assembly
Fits: G, (170 SN: 7500 & up), 175, 180
(All gas), Replaces: 70253122, 70800069
(Side inlet & outlet, 1/8" x 1/8" female
pipe thread)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Sediment bowl assys., parts cont...
Price
ABC092
$27.30
Bowl Assy:
Description / Application
Sediment Bowl Assembly
Fits: B, C, CA, D14, (D15 gas up to SN:
9001), D17 gas up to SN: 42000, D19 gas to
SN: 12000, IB, I-40, I-400, I-60, I-600, RC
Replaces: 70237944 (3/8" pipe inlet, 1/8"
pipe outlet, 1.280" long bowl. Includes
5/16" compression adaptor fitting)
Sediment Bowl Assembly
Fits: D10, D12, D14, WC, WD, WD45, WF,
(170 gas SN: up to 7500)
Replaces: 70239167 (Includes shallow bowl
w/ 3/8" pipe inlet, (2) 1/8" pipe outlets)
NOTE: For tractors w/ 1 outlet use
ABC092 sediment bowl assy.
$29.95
Order #
Price
Description
ABC124
$4.95
Glass Bowl, Replaces: 70237947
(2.315" L, 2-1/8" O.D. )
JDS642
$0.95
Gasket, Replaces: 70208137
USA made
ABC236
$7.20
Bail Assembly w/ Brass Nut
Replaces: 70223248
(2-1/8" O.D., 2.370" L)
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
Chassis parts
ABC002
Allis
Chalmers
Order #
The following parts (Sold separately) will fit ABC281 Sediment
Screen (3/8" dia. center hole)
Fuel filters, parts
Order #
ABC123
ABC039
ABC563
ABC229
ABC534
ABC490
Price
In Line Fuel Filter w/ Hose & Clamps
Fits: Allis Chalmers models using 3/8"
fuel line NOTE: Must splice fuel line to
use. Will help to keep rust & dirt out of
carburetor.
ACS326, ABC092, ABC002 components
The following parts (sold separately) will fit ACS326, ABC092,
ABC002 Sediment Bowl Assys:
Order #
Price
Description
ABC123
$2.90
Glass Bowl, Replaces: 70237945
(2" O.D., 1.280" L)
ABC039
$1.45
Gasket, Replaces: 70208362
(2" O.D.) USA made
ABC563
$4.95
Bail Assembly w/ Nut
Replaces: 70223247 USA made
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
Order #
Price
ABC281
$34.45
ABC124
ABC1315
$8.50
ABC1423
$29.95
ABC1421
$5.25
EACH
Screen (3/8" dia. center hole)
Description / Application
Sediment Bowl Assembly w/ 2.315" long
Bowl & 1/4" x 5/16" Adapter
Fits: D15 gas SN: 9001 & up, D15 diesel,
D17 gas SN: 42001 & up, D17 diesel, D19
gas SN: 12001 & up, D19 diesel, D21, U,
UC, WD45 diesel, 170 diesel, 175 diesel 180
diesel, 185 diesel, 190, 190XT
Replaces: 70237946
(3/8" pipe inlet, (1) 1/8" pipe outlet)
JDS642
ABC236
ABC229
Description / Application
$6.45
ABC534
Fuel Tank Screen
Fits: Most Allis Chalmers models w/
stem style sediment bowl Will fit ABC092,
ABC281, IHS713, IHS1577 sediment bowl
assemblies (.375" screen O.D., .216" pipe
O.D., 2.530" o/a length) USA made
NOTE: Slides on top of sediment bowl
inlet to prevent dirt from the fuel tank
bottom from entering the sediment
bowl assembly. To fit ABC281, IHS713,
IHS1577 customer must drill sediment
bowl stem out.
Diesel Single Fuel Filter Assembly w/
Glass Bowl fits: 160, 170, 175, 5040, 5045,
5050, Replaces: 72089560
(4 1/2" x 20 UNF ports)
NOTE: Use caution when threading fuel
line in, as it is not returnable if threads
have been cross threaded.
Fuel Filter Element w/ Seals
(For Cav/Simms fuel filters)
Fits: 160, 170, 175, 5040, 5045, 5050, 6040 &
6140, Replaces: 70251397, Cav # 7111/296
(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)
NOTE: Sold individually.
ABC281 components
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
41
Allis
Chalmers
Chassis parts
Steel fuel lines
Throttle parts cont...
Order #
Price
ACS2066
$24.95
ACS1974
$29.95
Fits: B, C, CA, IB, D10, D12
Replaces: 70207278, 70215478, 70243108
(13-1/8" o/a length, 1/4" tube O.D.,
1/4" compression fittings)
NOTE: May have to trim to fit.
ACS1863
$32.95
Fits: WD
Replaces: 70220636
(23" o/a length, 1/4" tube O.D.,
1/4" 45° inverted flare nuts )
ACS1866
$32.95
Application
Fits: G
Replaces: 70800066
(1/4" O.D., 11" o/a length, 1/8" NPT
inverted flare fittings)
Fits: WD45 gas
Replaces: 70226281
(24" o/a length, 1/4" tube O.D.,
1/4" 45° inverted flare nuts)
Order #
Price
Description / Application
ACS225
$19.95
Steering Shaft Bushing
Fits: WD, WD45, Replaces: 70222447
(.900" I.D., 1.009" O.D., .057" thick,
.987" length)
ACS184
$6.95
Throttle Quadrant & Hydraulic Lever Knob
Fits: CA & G on Hydraulic Lever; WD,
WD45, (D10, D12, D14, D15, D17, 180, 185,
190, 190XT, 200, 210 & 220 for numerous
applications), Replaces: 70220901
(.466" hole I.D., 1.213" o/a length)
ACS185
$13.50
ACS267
$13.95
Throttle Quadrant & Hydraulic Lever Slide
/ Block
Fits: WD, WD45
Replaces: 70222454
Throttle Return Spring
Fits: WD, WD45 gas
Replaces: 70220923
(6-7/8" o/a length) USA made
Throttle parts
Order #
Price
ACS1251
$19.50
ACS181
$18.75
ACS334
$12.95
ACS182
$7.95
ACS1248
$19.50
ACS191
$94.75
42
Description / Application
Throttle Lever
Fits: G
Replaces: 70800149
(6-3/4" long, 3/4" wide, .104" thick)
USA made
Clutch, transmission parts
Order #
Price
Description / Application
ACS346
$349.95
Clutch Kit fits the following w/ 8-1/2"
diameter clutch: B, IB, C, CA
Replaces: 70226262 (pressure plate),
70226729 (clutch), 70227704 (throwout
bearing), 70206968 (pilot bearing)
(8-1/2", 1-1/8" dia. spline, 10 splines,
Pressure plate mounting holes spaced
in groups of 2) NOTE: Includes new
8-1/2" woven clutch disc, pressure plate,
throwout bearing, and pilot bearing.
Measure clutch prior to ordering.
Please note this does not include a pilot
bushing. Some tractors require a bushing
instead of a bearing. The bushing is not
available through STP, Inc.
ACS2470
$158.50
Clutch Kit fits the following w/ 9"
diameter standard (not heavy duty) clutch:
'Some' early B, C, CA, (D10 up to SN:
3501), (D12 up to SN: 3001), D14, D15
Replaces: 70206968 (9" dia., 1-1/8" - 10
splined hub, Pressure plate mounting
holes spaced in groups of 2)
NOTE: Includes new 9" woven clutch
disc, pressure plate, throw out bearing,
pilot bearing & clutch lineup tool.
Measure clutch prior to ordering.
Please note this does not include a pilot
bushing. Some tractors require a bushing
instead of a bearing. The bushing is not
available through STP, Inc.
Throttle Rod
Fits: G, Replaces: 70800152
(45-1/4" o/a length) USA made
NOTE: Powder coat AC orange.
Throttle Rod Bracket
Fits: G
Replaces: 70800302
USA made
Throttle Rod Bracket Spring
Fits: G, Replaces: 70800248
(2-1/2" o/a length; 11/16" O.D.)
USA made
Throttle Lever
Fits: B SN: 101 & up, IB SN: 1001 & up, C,
CA, Replaces: 70211268
(6-7/8" long, 3/4" wide, .104" thick)
USA made
Throttle Quadrant w/ Bushing
Fits: WD, WD45
Replaces: 70227004 (quadrant), 70222447
(bushing)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Clutch, transmission parts cont...
Allis
Chalmers
Clutch, transmission parts cont...
Price
Description / Application
Order #
Price
$19.95
Clutch Throw-Out Bearing
Fits: B, C, CA (All w/ 9" clutch), D10 up to
SN: 3500, D12 up to SN: 3000, D14 up to
SN: 3000, D15 up to SN: 3000, D17 up to
SN: 75000, D19, ED40, H3, H4, HD3, HD4,
180, 185, 190, 190XT, 200; Combines: A, A2,
C, C2, F, F2, F3, L up to SN: 4316, M, M2,
M3, Replaces: 70235079
(2.078" I.D., 0.801" thick, 3.269" face dia.)
NOTE: Measure before ordering.
ABC2974
$168.50
ACS2982
$194.50
NEW! Pressure Plate
Fits: WD45 SN: 99648 & up; Will also fit
WC, WD, WF, Early WD45 when heavy
duty pressure plate is desired
Replaces: 70230424, 70230506
(10" O.D., 9 springs) NOTE: Six mounting
holes are equally spaced.
ACS2678
$49.00
NEW! Brake & Clutch Pedal Shaft
Fits: WD, WD45, WD45 diesel
Replaces: 70222650
(0.996" O.D, 17 1/4" length)
USA made
NOTE: Bare finish.
ABC2937
$13.50
ACS1507
$14.95
ACS2972
$317.75
NEW! Clutch Kit fits: WC, WD, WF,
(WD45 up to SN: 99647), Replaces:
70226859 (pilot bearing), 70204829 (throwout bearing), 70226764, 70227074 (clutch),
70230506, 70208286 (pressure plate) (10"
diameter, 1-1/4" - 10 splined clutch hub, 6
spring pressure plate; pilot bearing - 0.984"
I.D., 2.047" O.D.) NOTE: This clutch kit
includes a rebuilt pressure plate, new
clutch disc, throw-out bearing, and pilot
bearing (does not include pilot bushing
used instead of bearing on WC & WF).
ACS2978
$348.50
NEW! Clutch Kit fits: WD45 SN: 99648
& up gas, LP, diesel; Will also fit WC,
WD, WF, Early WD45 when heavy duty
pressure plate is required, Replaces:
70226859 (pilot bearing), 70204829 (throwout bearing), 70226764, 70227074 (clutch),
70232594, 70230424 (pressure plate)
(10" diameter, 1-1/4" I.D. - 10 splined
clutch hub, 9 spring pressure plate; pilot
bearing - 0.984" I.D., 2.047" O.D.)
NOTE: This clutch kit includes a new
pressure plate, clutch disc, throw-out
bearing, and pilot bearing.
ACS189
$14.95
ACS270
$12.50
MHS076
$36.95
ABC550
$85.65
ACS076
$28.00
ABC1437
$7.75
Clutch Inspection Cover Plate w/ Spring
Steel Clips
Fits: B, IB, C, CA, D10, D12, D17, D19
Replaces: 70208465
Clutch Pedal Return Spring
Fits: B up to SN: 124037, (IB up to SN:
2836), C, (CA up to SN: 30611)
Replaces: 70225646 (4.300" o/a length,
.100" wire dia., .750" body dia.)
Clutch Disc
Fits: G
Replaces: 70800662
(6-1/2" dia., 15/16"-10 spline)
Pressure Plate (New, not rebuilt)
Fits: G, Replaces: 70800027
(6-1/2" dia.) NOTE: Must recheck clutch
adjustment & clearance after installation.
Clutch Throw-Out Bearing
Fits: G
Replaces: 70800041
(1.500" center hole)
Clutch Alignment Tool
Fits: G
(15/16" spline O.D., 10 splines .625" pilot)
ACS1256
$22.95
Flywheel Cover
Fits: G, Replaces: 70800388
(8" c.c. bolt holes) USA made
ABC1928
$38.75
Clutch Throw Out Bearing
Fits: B w/ 8 1/2" clutch , (D10, D12 SN:
3502 & up), RC, WC, WD, WD45
Replaces: 70204829 (2.060" I.D., 3.215"
O.D., 0.810" thick) USA made
ACS2980
$114.95
NEW! Clutch Disc
Fits: WC, WD, WF, WD45 gas, LP, diesel
Replaces: 70226764
(10" O.D., 1-1/4" spline diameter - 10
spline)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
NEW! Pressure Plate (Rebuilt)
Fits: WC, WD, WF, (WD45 to SN: 99647)
Replaces: 70230506, 70208286
(10" O.D., 6 springs)
USA made
NEW! Clutch Pilot Bearing
Fits: WD, WD45, D17, D19, D21, 170 thru
220, 7000, Replaces: 226859, 70226859
(0.984" I.D., 2.047" O.D., 0.590" wide)
NOTE: Sealed bearing.
Clutch Inspection Cover Plate
w/ Spring Steel Clips
Fits: D14, D15, Replaces: 70227610
NOTE: Primer paint.
Clutch, transmissions, parts continue on next page
43
Chassis parts
Order #
ABC496
Allis
Chalmers
Chassis parts
Clutch, transmission parts cont...
Clutch, transmission parts cont...
Order #
Price
Description / Application
ABC2501
$19.85
Clutch Throw Out Bearing
Fits: D17 SN: 75001 & up, 170, 175, 210,
220, 7000, Replaces: 70260803
(2.490" I.D., 4.060" O.D., 0.870" wide)
NOTE: Sealed bearing, no need to grease.
ACS321
$12.50
Clutch Pedal Return Spring
Fits: D21
Replaces: 70239262
(4.590" o/a length)
USA made
ABC1937
$34.95
ACS021
$95.00
ACS282
$199.00
ACS041
ACS285
$95.00
$199.95
Throw Out Bearing
Fits: 9130, 9140, 9150, 9170, 9190, 9435,
9455, Replaces: 72160065
USA made
Main Shaft Drive Gear
Fits: G
Replaces: 70800377
NOTE: 41 teeth.
Reverse Pinion Shaft Gear
Fits: Late CA SN: 13291 & up; D10 SN:
7760 & up (To fit older must also use
ACS285); D12 SN: 6091 & up (To fit older
must also use ACS285); D14 up to SN:
19001; D15 SN: 17565 & up (To fit older
must also use ACS285), Replaces: 70241367
(1.092" total width) NOTE: 30 teeth.
1st Pinion Shaft Gear
Fits: D10, D12, D14, D15
Replaces: 70228296
NOTE: 50 teeth. Close out.
3rd Pinion Shaft Gear
Fits: Late CA SN: 13291 & up; D10 SN:
7760 & up (To fit up to SN: 7759 must also
use ACS282); D12 SN: 6091 & up (To fit up
to SN: 6090 must also use ACS282); D14;
D15 SN: 17565 & up (To fit up to SN: 17564
must also use ACS282), Replaces: 70234575
NOTE: 37 teeth.
ACS048
$32.50
Transmission Bushing
Fits: CA, D10, D12, D14, D15
Replaces: 70227316
(1-1/8")
ACS049
$32.50
Transmission Bushing
Fits: CA, D10, D12, D14, D15
Replaces: 70227317
(1-3/16")
ACS045
$142.85
44
Order #
Transmission Input Shaft
Fits: 180, 185, 190 SN: 9001 & up, 190XT,
200, Replaces: 70256571
Price
ABC387
$7.55
ACS046
$75.00
ACS302
$24.20
Description / Application
Transmission Input Shaft / Main Shaft
Seal fits: 7010, 7020, 7040, 7045, 7060, 8010,
8030, 8050, 8070
Replaces: 70275802
(1.375" I.D., 2.000" O.D., .337" width)
3rd & 4th Shift Fork
Fits: 180, 185, 190 SN: 9001 & up, 190XT
SN: 9001 & up, 200
Replaces: 70261385
Hydraulic / Transmission Dipstick
Fits: CA, D10, D12, WD, WD45
Replaces: 70224611
Gear shift lever, parts
Order #
Price
ACS171
$89.95
Description / Application
Curved Gear Shift Lever w/out Pins
Fits: WD45, (Late WD SN: 127007 & up)
Replaces: 70257580
ACS254
$13.45
ACS255
$12.65
ACS253
$12.65
Gear Shift Lever Washer & Snap Ring
Fits: B, C, CA, D10, D12, D14, D15, ED40,
G, WC, WD, WD45, WF
Replaces: 70202875 (snap ring), 70207772
(retainer) NOTE: Retains gear shift lever
into housing.
Gear Shift Lever Pin (Standard), Pair
Fits: B, C, CA, G, WD, WD45, 190XT, 210,
220, 7000, 7010, 7020, 7030, 7040, 7045,
7050, 7060, 7080, 7580, 8010, 8030, 8050,
8070, Replaces: 70203465
(Standard: .325" wide square end,
.250" round pin dia.)
Gear Shift Lever Pin (Oversize), Pair
Fits: B, C, CA, G, WD, WD45, 190XT, 210,
220, 7000, 7010, 7020, 7030, 7040, 7045,
7050, 7060, 7080, 7580, 8010, 8030, 8050,
8070, Replaces: 70218859
(Oversize: .375" wide square end, .285"
round pin dia.) NOTE: ACS253 is used
to "tighten up" worn shift lever. Must be
ground to fit existing worn lever.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
ABC085
Price
$4.50
Order #
Price
ACS202
$5.85
Knob (Bakelite)
(3/8" NF)
Knob (Rubber)
Replaces: 70226023
ACS215
$4.65
Knob (Rubber)
Replaces: 70228215
Description / Application
Control Lever Knob fits: D10, D12, D14, D15, D17, D19;
Lawn & Garden: 116, 122 NOTE: 3 used per tractor; Sold
individually.
ACS184
Description / Application
Hydraulic Lever Knob fits: CA, D17, G
Snap Coupler Lever Knob fits: D10 thru D15, WD, WD45
Seat Base Knob fits: 180, 185, 190, 190XT, 200, 210, 220
$4.50
PTO Lever Knob fits: 180 & 185 w/out clutch pack
Throttle Lever Knob fits: Some Allis Chalmers models
Cab Door Knob fits: 7000 SN: 8001 & up, 7010, 7020, 7045;
7060 SN: 6001 & up, 7080 SN: 3001 & up, 7580 SN: 1605 & up
ACS2699
$7.95
Choke Knob fits: D10 up to SN: 3501, D12 up to SN: 3001,
D14, D17 up to SN: 32001
Fuel Shut Off Knob fits: D17 diesel up to SN: 32001
Hydraulic Selector Valve Knob fits: D14, D15, D17 up to SN:
75000
Hydraulic Spool Valve Knob fits: D14 (2 - 3 used), D15 (2 - 3
used), D17 up to SN: 75000 (2 - 3 used)
Final Drive Clutch Knob fits: CA
PTO Lever Knob fits: RC, WC, WD, WD45
Transmission Lock Out Lever Knob fits: RC, WC
$14.85
Knob (OEM) (Rubber)
Replaces: 70233770
USA made
Description / Application
Shift Range Lever Knob fits: D10, D12, D19, 170, 190
Hyd. Lever Knob fits: D10 SN: 3501 & up, D12 SN: 3001 & up
PTO & Shift Lever Knob fits I40, I400
$5.50
Knob (Bakelite)
Replaces: 70242338
(3/8"-24 NF, 1.250" O.D.)
Knob (Bakelite)
Replaces: 70206456
(3/8"-24 NF)
USA made
Brake Lever Knob fits: B up to SN: 1101
NEW! Knob
Replaces: 70228321
(1/4" - 20 thread, 1.035" O.D.)
USA made
Description / Application
ABC362
Description / Application
ACS2509
Gear Shift Lever Knob fits: B SN: 120982 & up, IB SN: 26006 &
up, C, CA SN: 8971 & up, D10, D12, D14, D15, D17, D19, D21,
late WD SN: 127007 & up, WD45, WD45D, 170, 175, 180, 185,
190, 190XT, 200 up to SN: 4001, 210, 220
$6.95
Knob (Rubber)
Replaces: 70220901
(.466" hole I.D., 1.213" o/a length)
ABC221
Description / Application
Description / Application
PTO & Belt Pulley Lever Knob fits: WC, WF, WD, WD45,
WD45D
Hydraulic Lever Knob fits: D10, D12
Snap Coupler Release Lever Knob fits: D17
PTO & Throttle Knob fits: D21
PTO w/out Clutch, Throttle Lever, Traction Booster Lever,
Hydraulic & PTO levers Knob fits: 190, 190XT, 190XT III (up
to SN: 14186)
Throttle Lever, Traction Booster Lever, Hydraulic & PTO
Levers Knob fits: 200, 210, 220, 200 FWA
Hydraulic Lever Knob fits: 5020, 5020 FWD, 5030
Hydraulic Sensitivity Controls, Quick Hitch Knob fits: 6060,
6070, 6080
Hydraulic Lever Knob fits: 6140
Pump Control Knob fits: 170, 175, 185 SN: 12800 & up, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030,
8050, 8070, 4W220, 4W305
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
45
Chassis parts
Description / Application
Gear Shift Lever Knob fits: A, RC, (U SN: 12001 & up), WC,
WD up to SN: 127006, WF, Replaces: 70202862
Allis
Chalmers
Knobs cont...
Knobs
Allis
Chalmers
Chassis parts
Gear shift boots
Order #
Price
ACS263
$14.95
ACS174
$9.95
ACS256
$9.95
Steering wheels, parts cont...
Application
Fits: G
Replaces: 70800354
(2-1/16" bottom I.D., 11/16" hole dia.)
Fits: B, IB, C, CA, D10, D12, D14, D15,
ED40, I-40, I-400, I-60, I-600, RC, WC, WD,
WD45, WF, Replaces: 70232192
(1-3/4" bottom I.D.; 9/16" hole dia.)
Fits: D17, D19, D21, 170, 175, 210, 220,
7000, 7010, 7020, 7030, 7040, 7045, 7050,
7060, 7080, 8010, 8030, 8050, 8070
Replaces: 70233767
(2-1/8" bottom I.D., 1/2" hole dia.)
Order #
Price
ACS108
$49.50
Steering Wheel fits: D14 up to SN: 19000,
D17 up to SN: 24000, (RC - but has bigger
dia.), Styled WC, WD, WD45, Replaces:
70229677 (18" dia., round hub w/ 3/8"
drive hole, 7/8" shaft, 3 spokes)
NOTE: Pin NOT included.
ACS225
$19.95
Steering Shaft Bushing
Fits: WD & WD45; Also used as a front
steering shaft support shaft bushing for
D14, D15, D17 diesel, D19
Replaces: 70222447
ACS134
(Black)
$49.50
Steering wheels, parts
Steering wheels are just like original
All new material • Steel spokes
Order #
Price
ACS129
$49.50
JDS997
JDS282
(15" dia.)
$52.50
ACS135
(Orange)
$29.95
Fits: Early B, IB, C (All using covered
spoke wheel), Replaces: 205623, 207370,
207562 (15" dia., tapered & keyed hub,
11/16" - 3/4" shaft, 3 COVERED TO
CENTER spokes)
$49.50
$49.50
ACS136
(Black)
$5.25
FDS197
(Chrome)
$6.45
46
Steering Wheel
Fits: G
Replaces: 70800101
(15" widest dia., 11/16" - 3/4" tapered
hub)
$119.95 NEW! Steering Wheel
ACS106
(16" dia.)
ACS136
Description / Application
ACS137
(Creme)
Steering Wheel
Fits: B, C, CA
Replaces: 70261861
JDS282: (15" dia., Tapered, keyed &
stepped hub, 11/16" - 3/4" shaft, 3 spokes)
ACS138
(Creme)
$29.95
ACS216
$58.50
ACS106: (16" dia., Tapered, keyed &
stepped hub, 11/16" - 3/4" shaft, 3 spokes)
FDS197
Steering Wheel Nut
Fits: B, IB, C, CA, G
Replaces: 913133, 70207562
ACS136: (5/8"-18 NF x .859" tall)
USA made
FDS197: (5/8"-18 NF x 1.132" tall)
Description / Application
Steering Wheel
Fits: D10, D12, (D14 SN: 19001 & up),
D15, (D17 SN: 24001 & up), D19, D21;
Combines: A2, C, E, E3, F, K
ACS134 Replaces: 70232033
ACS137 Replaces: 70233851
(17-1/2" dia., splined hub, 36 splines,
7/8" shaft, 3 COVERED TO CENTER
spokes) NOTE: Black wheel used
through mid 1959. Creme wheel used
mid 1959 & up.
Steering Wheel Cap
Fits: Same as ACS134, ACS137
Replaces: 70233852
NOTE: Die cast chromed, painted.
Orange used through mid 1959. Creme
used mid 1959 to approx. 1965 (then use
ACS218).
Steering Wheel Emblem
Fits: (D14 SN: 19001 & up), D15, (D17 SN:
24001 & up) (All w/ power steering)
Replaces: 70232712 USA made
ACS218
$58.50
Steering Wheel Emblem w/ Decal
Fits: D10, D12, D15, D17, D21, ED40, EIII
Gleaner Combine (Appx. 1965 & up)
Replaces: 70246724 USA made
NOTE: Die cast, chromed.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
ACS308
ACS243
ABC504
MIS103
Fits: D14, D15, D17, D19, (RC, WC & WF
when using later style joint), WD, WD45
Replaces: 70224890
Description / Application
$124.95 Steering Wheel
Fits: 170, 175, 180, 185, 190 SN: 2485 &
up, 190XT, 200, 210, 220, 7030, 7040, 7050;
Industrial: I40, I60, I400, 500, 510, 512,
585, I600, 610, 612, 614, 615, 621, 715;
Combines: A, E3, F, F2, F3, G, K, K2, L, L2,
L3, M, M2, M3, N5, N6, N7, R40, R60, R70
Replaces: 70256852
(15-3/4" dia., 6-3/4" dish, .853" spline
O.D., 36 spline, 3 COVERED TO CENTER
spokes) NOTE: Deep dish.
$59.95
$22.50
$4.95
Steering Wheel
Fits: 6060, 6070, 6080, 7000 SN: 8001 & up,
7010, 7020, 7045, 7060 SN: 6001, 7080 SN:
3001 & up, 7580 SN: 1605 & up, 8010, 8030,
8050, 8070, 8550, 4W220, 4W305
Replaces: 71142487 (15" dia., 4-1/2" dish,
36 splined hub, 13/16"shaft, 0.853" spline
O.D., 3 COVERED TO CENTER spokes)
NOTE: Shallow dish round wheel.
Steering Wheel Cap
Fits: Same as ACS308, OLS139
Replaces: 71142505
(2.528" dia.)
Description
Order # Steering joints repair kits - USA made
NOTE: Universal steering joints repair kit w/ yokes, pins &
grease fitting. Check measurement before ordering.
Order #
Price
Fits: RC, WC, WD, WD45, WD45D
Replaces: 70202152
NOTE: Must redrill pin holes to fit shaft.
ABC167 measurements: 7/8" & 1" dia. shaft, .750" dia. u-joint caps
ABC280 $137.95
Steering parts
Order #
Price
ACS068
$98.95
Fits: D14, D15, D17, D19 (All w/ manual
steering), Replaces: 70228150
(1.700" O.D., 1.197" I.D., .455" wide)
Price
ACS341
$74.95
ACS343
$74.95
ACS337
$64.95
Steering Worm Shaft Bearing.............................ABC558............... $14.95
NOTE: 1 used per tractor; Sold individually.
Steering shaft seal
Steering Shaft Tube w/out Bushing
Fits: B w/ Ross steering box
Replaces: 70210472
(40-15/16" length, 1-1/2" O.D.) USA made
Steering Shaft Tube w/out Bushing
Fits: C w/ Ross steering box
Replaces: 70219390
(40" o/a length, 1-1/2" O.D.) USA made
Steering Shaft Tube w/out Bushing
Fits: G, Replaces: 70800097
(50-1/2" length, 1-1/2" O.D.) USA made
Fits: D14, D15 w/ manual or power
steering, Replaces: 70229967
(2.380" O.D., 1.500" I.D., 0.500" wide)
Order # Description / Application
Steering Shaft
Fits: B, IB, G
Replaces: 70211001, 70255675
NOTE: For Ross steering box only. Single
prong, rides in worm.
$10.75
Steering worm bearing
Description
Fits: Late WC, WD, WD45, WD45D
Replaces: 70224825
NOTE: Heavy duty; loader use.
Must grind yokes for clearance.
ABC280 measurements: 7/8" & 1" dia. shaft, .936" dia. u-joint caps
Steering Wheel Nut
Fits: D10 thru D21, WF, 170 thru 220, 6060
thru 8550; Industrial: I40, I60, I400, 500,
510, 512, 585, I600, 610, 612, 614, 615, 621,
715, Replaces: 70252471
(13/16"-20 NEF)
Order # Application
ABC167 $96.10
Steering Wheel Spinner
Fits: Allis Chalmers models
NOTE: Aluminum.
Description
Price
Steering Shaft Cross & Bearing (U-Joint).........ABC2507............. $14.95
NOTE: 1 to 4 used per tractor; Sold individually.
Price
NEW! Vertical Splined Steering Shaft Seal.....ABC2837............. $9.95
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Steering parts continue on next page
47
Chassis parts
OLS139
Price
Allis
Chalmers
Steering shaft cross & bearing
Steering wheels, parts cont...
Allis
Chalmers
Chassis parts
Steering parts cont...
Order #
Price
ACS339
$21.40
ACS345
Power steering parts cont...
Description / Application
Order #
IHS338
Steering Shaft Tube Bushing
Fits: B, IB, C, CA, G (All w/ Ross steering
box), Replaces: 70210475
(1-3/8" O.D., 3/4" I.D.)
USA made
Price
Description / Application
$9.95
Underside view
IHS555
$28.50
$730.50
Steering Tube Mounting Brackets (Pair)
Fits: B, IB, C, CA, G
Replaces: 70207218
USA made
ABC468
$3.95
Front Spindle Bushing fits: B, IB, C, CA,
D10, D12, Replaces: 70205601
(1.250" I.D., 1.375" O.D., 1.500" long)
NOTE: 4 used per tractor;
Sold individually.
IHS673
FDS1274
(Original)
$37.45
$11.55
ABC1414
$48.75
48
Char-Lynn Power Steering Slip Fit
Coupler (For IHS555 Generator)
ABC380: (3-3/8" to 3-1/2" adjustable
length) USA made
$54.95
ABC414
ABC1419
$148.50
Description / Application
Power Steering Pump Pulley
Fits: Tractors using Eaton style pump
(3.750" O.D., .671" bore, .125" keyway,
.500" wide belt groove)
NOTE: Cast iron.
ABC1417
$69.95
Port Block only
(For IHS555 Generator)
USA made
Power steering parts
Price
$4.95
Char-Lynn Power Steering Torque
Generator w/out port block
Fits: Allis Chalmers models
(7/8" shaft)
Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended
Fluid Input - 3 to 4 GPM
ABC380
Order #
Power Steering Reservoir Cap w/ Gasket
Fits: WD45 gas, diesel
Replaces: 70204827
USA made
ABC497
(Economy)
Power Steering Pump Pulley
Fits: Allis Chalmers models
(5" O.D., 0.675" bore, 1/8" keyway,
0.9715" total width for 1/2" belt)
USA made
IHS740
$18.25
ABC497: (2-5/8" o/a length)
USA made
$223.35
Power Steering Pump Belt
Fits: D17 gas SN: 42001 & up
Replaces: 70237386
(1/2" x 41-1/4")
NOTE: Verify belt size before ordering.
Power Steering Priority Flow Control
Valve fits: Allis Chalmers models w/ LIVE
hydraulics (1/2" NPT inlet, 3/8" NPT
return, 1/2" NPT to remote cyls.)
USA made NOTE: Eliminates belt driven
pump, pulleys & brackets. Enables you
to use your hydraulic pump to operate
the power steering. Is preset at 1500 PSI
& 8 gpm. Adjust to your application.
Tie rods
Power Steering Pump Port Block
(For tractors using Eaton style pump
w/ separate reservoir) fits: Allis Chalmers
models, Replaces: Eaton 20925, AG33547A
USA made
Bolt (For ABC1414)
Replaces: Eaton 14126 USA made
NOTE: Yellow zinc; Grade 8.
Order #
Price
ACS213
(LH)
$63.95
ACS211 $63.95
(RH)
Application / Dimensions
Tie Rod End
Fits: B, C
ACS213 Replaces: 70207726
ACS211 Replaces: 70207725
(13/16" x 18 thread)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Tie rods cont...
Price
$69.50
Description / Application
Order #
$6.75
ACS111
$72.50
Bottom Seat Cushion
Fits: B, C
Replaces: 70205693
(28" long x 15" wide x 4" tall) USA made
NOTE: Black vinyl; Wood backed.
ACS071
$32.15
Seat Back (Back Rest)
Fits: IB, RC, WC, WF, Rumley 6
Replaces: U2743
(10-5/8" x 5-5/8" curved) USA made
FDS067
$48.50
Seat Pan fits: RC, WC, Some WD, WD45,
WF (All w/ 1-bolt mount seat)
Replaces: 70225050
(19" dia. pan, original seat pan was a 21"
dia.) NOTE: Steel, 9 hole, bolt down,
non-flip back.
ABC372
$18.30
ACS176
$14.95
Seat Pivot Bolt Bushing
Fits: WD up to SN: 127006
Replaces: 70225041
NOTE: 2 used per tractor;
Sold individually.
ACS328
$24.95
Seat Pivot Bolt Bushing
Fits: CA w/ pan seat, WD SN: 127007 &
up, WD45, WD45D, Replaces: 70225183
(3.368" o/a length, .635" I.D.)
NOTE: 1 used per tractor.
ACS1891
$14.95
Seat Bumper fits the following w/ a
standard pan style seat: D10 SN: 2267 &
up, D12 SN:2242 & up, D14, D15, D17,
D19, D21, (170 thru 190XT w/out deluxe
padded seat), Replaces: 70229703, 910880
(nut), 904204 (washer)
(1.043" long, 1.015" dia.)
MIS2679
$32.75
Tie rod boots
NOTE: Specify size when ordering (Base I.D. x Height x Hole I.D.)
Order #
Price
FDS336
$3.50
ABC368
$3.35
ABC370
ACS320
$3.50
$12.50
Application / Dimensions
Serviceable for G
Replaces: 70800442
(1.200" base, .475" tall, .500" hole)
Fits: B, IB, C, CA, D10, D12
Replaces: 71115779
(1.675" base, .900" tall, .625" hole)
Fits: D10, D12, D14, D15, D17, D19, WD,
WD45, 170, 175, 180, 185, 190, 190XT, 200
Replaces: 70223558
(1.800" base, .765" tall, .740" hole)
Fits: D21, 210, 220
Replaces: 70239467
(2.525" base, .950" tall, 1.100" hole)
JDS736
ABC369
ABC371
JDS736
$3.95
(1.500" base, .735" tall, .550" hole)
ABC369
$2.95
(1.575" base, .600" tall, .650" hole)
ABC371
$3.25
(1.300" base, .965" tall, .500" hole)
FDS337
$3.95
(1.450" base, .600" tall, .550" hole)
FDS337
Seats, parts
Order #
ACS116
ACS175
Price
$33.50
$42.80
Description / Application
Metal Seat Back
Fits: B, C
Replaces: 70208664
Description / Application
ACS157
MIS006AC $29.95
Spring Support
Fits: B, C, Replaces: 70208874
USA made NOTE: Spring steel, Powder
coat orange. 2 spring supports used per
tractor; Sold individually.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Hardware Kit (For ACS116 Metal Seat
Back) NOTE: Includes (4) square nuts,
(4) flat head screws & (4) lock washers.
Like original.
Chassis parts
2-Piece Tie Rod fits: (CA w/ adjustable
wide front axle; Must use a 7 degree tapered
reamer to fit steering arms.), D14, D15, D17,
D19, WD, WD45 (if cut to length), 170 up to
SN: 170 - 7500, 175 up to SN: 175 - 2035, 180,
185, 190, 190XT, 200, Replaces: 70249418,
70254661, 70254662, Can Replace 70250141,
70250142 (Inside tie rod 16-3/8" long grease
fitting to end, .782" dia. rod, Outer tube 173/8" long grease fitting to end, 1.560" O.D.
tube, tie rod end tapers to .660" to .735")
Price
Allis
Chalmers
Order #
ACS066
Seats, parts cont...
Seat Repair Kit w/ Rivets
(For FDS067 Seat Pan)
(5-1/2" O.D.; 5/8" center bolt hole)
USA made
NEW! Orange Tractor Seat Pad
Fits: 19" Pan (side to side)
(Foam pad, drawstring)
USA made
Orange & White Tractor Seat Pad
Fits: 19" Pan (side to side)
(Foam pad, drawstring)
USA made
Seats, parts continue on next page
49
Allis
Chalmers
Chassis parts
Seats, parts cont...
Order #
Price
MIS006BK
$29.95
ACS221
(Assy)
$349.95
ACS222
(Back rest)
ACS223
(Bottom)
ABC445
$95.95
Seat shock absorbers cont...
Description / Application
Order #
IHS325
Black Tractor Seat Pad
Fits: 21" Pan (side to side)
(Foam pad, drawstring)
USA made
Seat Cushions w/ Steel Frame
Fits: D10, D12, D14, D15, D17, D19, D21;
Will also fit some 170, 175, 180, 185, 190,
190XT, 210, 220 (All using 2-Piece seat
w/out arm rests)
ACS221 Replaces: 70236318
USA made NOTE: Restoration quality.
Metal backed. Cushions are embossed
like original!
ACS222 Replaces: 70236460
USA made
$126.50 NOTE: Metal backed.
ACS223 Replaces: 70236461
USA made
NOTE: Metal backed.
Price
$2.05
EACH
Fits: B, C, CA, RC, U, WC, WF
Order #
Price
$32.50
IHS347
$39.95
Mid Mounted Seat Shock Absorber
w/ Bushings
(Center-to-center compressed = 7-1/4",
Fully extended = 9-1/8)
NOTE: Horizontal bolt holes at each end.
ABC526
$9.65
Seat Shock Bolt
Serviceable for WD, WD45
(7/16" NC thread, .625" shoulder,
2.380" o/a length) USA made
IHS030
$27.95
Order #
Price
Description / Application
ACS161
$108.50
Seat Shock Absorber w/ Spring & Bushing
Fits: (CA - shock only; Must reuse outer
spring); WD up to SN: 127006
Replaces: 70222450 (shock), 70223213
(spring)
ACS219
50
$99.80
Rear-Mounted Seat Shock Absorber w/
Bushings (Center-to-center compressed =
11-1/2", Fully extended = 18-1/8)
USA made
Seat Spring Coil
$19.95
Seat shock absorbers
$99.80
Description / Application
IHS329
IHS584
ACS196
Rubber Seat Bushing only
(For Horizontal bolt hole)
Fits: Allis Chalmers Seat Shock Absorbers
Replaces: 70222488 NOTE: 2 used per
horizontal bolt; Sold individually.
Monroe® easy ride seat parts
$139.30 Universal Full Suspension Seat w/ Back
Rest & 5-Angle Base (w/ Slide Track &
Mounting Brackets)
Fits: Allis Chalmers models
NOTE: Can be adapted to fit many
tractors & lawn mowers.
Description / Application
Seat Shock Absorber w/ Spring & Bushing
Fits: WD SN: 127007 & up, WD45, WD45
diesel, Replaces: 70226042 (shock),
70226044 (spring)
(Center-to-center compressed = 8-1/8",
Fully extended = 11-3/4")
Seat Shock Absorber w/ Spring & Bushings
Fits: D10, D12, D14, D15, D17, D19, D21,
170, 175, 180, 185, 190, 190XT, 200, 210,
220, 7000, 7010, 7020, 7030, 7040, 7045,
7050, 7060, 7080, 7580, Replaces: 70227916
(shock),70227917 (spring)
(Center-to-center compressed = 8-1/8",
Fully extended = 11-3/4")
Seat Pivot Support Rod
(3-1/2" w/ (2) flat washer, (2) rubber
bushings & (2) #5 bolts)
NOTE: Exact of original.
Fenders
Same gauge, weight & material as original equipment.
Fit to tractor before painting.
Order #
ACS093L
(LH)
ACS093R
(RH)
Price
Application
$97.50
$97.50
Fits: Early B; Serviceable for Late B, C, CA
ACS093L Replaces: 70225234
ACS093R Replaces: 70225236
NOTE: Not restoration quality, more
rounded then original fenders. To fit Late
B, C & CA customer will need to grind
off brackets.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ACS095L
(LH)
$175.00
ACS097L
(LH)
ACS097R
(RH)
ACS126L
(LH)
ACS126R
(RH)
Application
Order #
ACS190
Price
Application
$124.95
Fits: B, C w/ Ross Steering
Replaces: 219919
$175.00
Fits: RC; Styled WC (1940 & up)
ACS095L Replaces: 70208206
ACS095R Replaces: 70208207
NOTE: Includes mounting brackets.
Not restoration quality.
Toolboxes
Order #
Price
ACS148
$49.95
Fits: WD, WD45
ACS097L Replaces: 70224935
ACS097R Replaces: 70224934
NOTE: Not restoration quality.
ACS090
$49.95
ACS144
$54.95
ABC308
$37.95
$225.00
$225.00
Application
Fits: RC, (WC SN: 74330 & up),
WF SN: 1904 & up, Replaces: 70208446
(11" long, 3-5/8" high, 5-3/8" wide)
NOTE: Persian orange #1 powder coat.
$150.25
$150.25
Chassis parts
ACS095R
(RH)
Shroud assemblies (toolbox) cont...
Allis
Chalmers
Fenders cont...
Fits: D17, D19
ACS126L Replaces: 70237344
ACS126R Replaces: 70237342
NOTE: Not restoration quality.
Fits: D10, D12 (both up to SN: 9001), D14,
D15, D17, WD, WD45
Replaces: 70228924
(15" long, 6-3/16" high, 4" wide)
NOTE: Persian orange #1 powder coat.
Fits: D17, D19, 170, 175, 180, 185, 190,
190XT, 200, 210, 220
Replaces: 70249750
(21-3/8" long, 6-1/4" high, 4" wide)
NOTE: Persian orange #1 powder coat.
Fits: Allis Chalmers models
(11" long, 4" wide, 4-1/2" tall,
Bolt holes center to center = 5-1/2")
ABC472
$32.50
Fits: Allis Chalmers models
(4" wide x 16" long x 4-1/4" tall)
Shroud assemblies (toolbox) - USA made
Order #
ACS201
Price
Application
$124.95
Fits: B, C w/ Hand Start
Replaces: 70213325
ACS200
Hand clutch lever
Fits: CA
Replaces: 70206456 (knob), 70225582
(lever), 912195 (bolt) (Primed)
USA made
$124.95
Fits: B, C, CA w/ Gemmer Steering
Replaces: 70225244
Description
Order # Price
Final Drive Hand Clutch Lever........................... ACS325 ..............$84.95
w/ Knob & Bolt
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
51
Allis
Chalmers
Chassis parts
Brake parts
Order #
Price
Brake parts cont...
Description / Application
ACS091
$68.95
ACS1995
$77.85
ACS007
$63.50
ACS2545
$59.95
ACS332
$39.95
ABC105
$48.50
Lined Brake Band (Hinged)
Fits: B, IB, C, CA
Replaces: 70216775
NOTE: 1 band for 1 wheel only.
ACS1650
$10.65
Brake Pivot Pin
Fits: B, C, CA, Replaces: 70207221
(0.750" dia. x 1.625" long) USA made
NOTE: Zinc plated
Brake Drum
Fits: B, C, left side of CA
Replaces: 70205527
NOTE: New & improved ductile iron.
Brake Drum
Fits: D17 up to SN: 42000, WD, WD45,
WD45D, Replaces: 70232585
(1-1/2" bore w/ keyway, 2.860" wide,
7.875" O.D.) NOTE: New & improved
ductile iron.
Brake Drum
Fits: G, D10, D12, D14, D15
Replaces: 70239542, 70800668
NOTE: Now made from ductile iron!
Brake Pedal Shaft & Bushings
Fits: G, Replaces: 70800000 (shaft)
USA made
Price
$14.95
ACS2678
$49.00
ABC164
$18.50
Brake Shoe Lining Set w/ Rivets
Fits: D17 SN: 42001 & up, D19, D21, 170,
175, 180, 185, 190
(1-1/4" wide x 7-1/4" long)
NOTE: For 1 side, no returns on broken
shoes.
MIS1131
$33.95
Brake Riveting Tool
(1-1/4" throat, 1/8" dia. rivet punch)
NOTE: Use to rivet brake linings to
existing shoe or band. Includes a tool
to drive out old rivets, a tool to drill &
countersink linings, a tool to peen the
new rivet & instructions. Mounts into
vice. Not for use w/ deep recess shoes.
Use for ABC017, ACS251 shoes.
MIS2547
$89.95
Riveting Tool
(For brake shoe & disc relining for most
tractors) (3-3/8" deep throat x 2-1/8" high
throat) USA made
NOTE: Includes 2 punches. Use for
ABC164, ACS252, ACS332 shoes.
ACS300
$24.90
Brake Rod Return Spring
Fits: G, Replaces: 70800013
(9-9/16" o/a length)
USA made NOTE: 2 used per tractor;
Sold individually.
ACS298
$14.95
Brake Shoe Return Spring
Fits: G, Replaces: 70800403
(2-3/16" o/a length)
USA made NOTE: 4 used per tractor;
Sold individually.
ACS271
$12.50
Brake Shoe Return Spring
Fits: B, C, CA, Replaces: 70207320
(3-1/2" o/a length)
NOTE: 2 used per tractor;
Sold individually.
ACS2103
$14.75
Brake Band Return Spring
Fits: RC, WC, WF, W Speed patrol
Replaces: U2649, 70202649
(0.747" body O.D., 0.110" wire dia.,
3.155" o/a length)
USA made NOTE: 2 used per tractor;
Sold individually
NEW! Brake Lining (For Band Brake)
Fits: WC, WF, RC
Replaces: 70277526
(For 1 wheel only)
ACS1652
$19.95
Brake Adjusting Screw
Fits: B, C, CA, Replaces: 70213375
(7/16"-20 NF x 3" long) USA made
NOTE: Zinc plated
ABC017
$14.50
Brake Shoe Lining Set w/ Rivets
Fits: B, IB, C, CA, Replaces: 70209864
(Long shoe is 2" W x 7-3/8" L; Short shoe
is 2" W x 6 3/8" L) NOTE: For 1 side, no
returns on broken shoes.
ACS070
$108.50
ACS251
$23.45
52
Order #
ACS252
Riveted Brake Shoes, Pair
Fits: D10, D12, D14, (D15 up to SN: 9001),
G, Replaces: 70230872, 70800487
NOTE: 1 pair for 1 wheel only.
Brake Shoe Lining Set w/ Rivets
Fits: D10, D12, D14, (D15 up to SN: 9001),
G, Replaces: 70230874, 70800412
(1-3/4" wide x 8-1/8" long x .190" thick)
NOTE: For 1 side, no returns on broken
shoes.
Description / Application
Brake Shoe Lining Set w/ Rivets
Fits: D17 up to SN: 42000, WD, WD45,
WD45D, Replaces: 70231633
(2" wide x 6-1/2" long)
NOTE: For 1 side, no returns on broken
shoes.
NEW! Brake & Clutch Pedal Shaft
Fits: WD, WD45, WD45 diesel
Replaces: 70222650
(0.996" O.D, 17 1/4" length) USA made
NOTE: Bare finish.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Brake parts cont...
Price
$13.95
ACS266
ACS316
ACS321
ACS1191
ABC2713
$5.95
$9.95
$14.50
$12.50
$19.95
$2.50
Order #
ACS006
Brake Rod Return Spring
Fits: WD, WD45, Replaces: 70222670
(6-5/8" o/a length)
USA made NOTE: 2 used per tractor;
Sold individually.
Price
Fits: G
Replaces: 70800902
(24-3/8" o/a length)
Front Brake Spring
Fits: D17 up to SN: 42000, D19, WD,
WD45, Replaces: 70232564
(3.1354" o/a length, .595" O.D., .081" wire
dia.) NOTE: Also used as a hydraulic oil
control spring on D19 up to SN: 12850.
2 used per tractor; Sold individually.
Brake Shoe Return Spring (Rear)
Fits: D17 up to SN: 42000, WD, WD45
Replaces: 70222501
(3-1/4" o/a length)
NOTE: 2 used per tractor;
Sold individually.
Brake Shoe Return Spring
Fits: D10, D12, D14, D15
Replaces: 70228253
(2-3/8" o/a length)
USA made NOTE: 4 used per tractor;
Sold individually.
MFS1351 $12.95
ACS1314
$51.95
ACS1531
$13.95
ABC1628 $14.95
Brake Pedal Return Spring
Fits: D10, D12, D14, D15
Replaces: 70239262
(4.590" o/a length)
USA made NOTE: 2 used per tractor;
Sold individually.
ABC1628 $14.95
Brake Anchor Shoe Pin
Fits: D17 up to SN: 42000, WD, WD45
Replaces: 70232801
(0.752" O.D., 6-5/8" o/a length)
USA made NOTE: 2 used per tractor;
Sold individually.
NEW! Disc Brake Ball fits: D17 SN: 75001
& up, D19, D21, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, 7000
Replaces: 70916538
(1" dia. steel ball)
NOTE: Sold individually.
ACS2105
$51.50
ACS1529
$18.95
ACS1525
$14.50
Hydraulic oil filter
Fits: D10, D12, D17, D19 (All up to SN:
12020); 170, 175, 615
Replaces: 70251381
(5-1/4" tall, 3.675" O.D.)
USA made
Description
Order # Description / Application
$194.95 Rear Axle
Price
Hydraulic Oil Filter................................................. ABC007.............. $9.85
NOTE: Spin on top.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Chassis parts
ACS283
Description / Application
Allis
Chalmers
Order #
ACS268
Rear axle, parts
Rear Axle Outer Oil Seal
Fits: G
Replaces: 70800166
(1.750" I.D., 2.690" O.D., .500" width)
Rear Axle Bearing
Fits: G
Replaces: 70800164, 70928929
(1.5748" I.D., 2.6772" O.D., .591" width)
Rear Outer Axle Oil Seal
Fits: B, IB, C, CA, Replaces: 70206450
(2.500" I.D., 3.548" O.D., .440" width)
NOTE: 2 used per tractor;
Sold individually.
Inner Axle Seal
Fits: G, Replaces: 70800351
(1.187" I.D., 2.004" O.D., .250" width)
NOTE: 2 used per tractor;
Sold individually.
Inner Upper Final Drive Shaft Seal
Fits: B, IB, C, CA, (D14 up to SN: 19001);
Also fits D10, D12, (D14 up to SN: 19001),
D15, ED40, I60, I500, I600 as a differential
carrier seal, Replaces: 70230851, 70232186,
70261958, 70800351 (1.187" I.D., 2.004"
O.D., .250" width) NOTE: 2 used per
tractor; Sold individually.
Rear Axle Hub Rubber Oil Seal
Fits: RC, WC, WF, W Speed patrol
Replaces: U2533, 70202533, 79016729
(0.795" wide, 9.975" O.D., 8.550" I.D.)
USA made NOTE: 2 used per tractor;
Sold individually
Outer Upper Final Drive Shaft Seal
Fits: B, IB, C, CA, ED40, Replaces: 70206449
(1.375" I.D., 2.720" O.D., .468" width)
NOTE: 2 used per tractor;
Sold individually.
Final Drive Pan Gasket
Fits: B, C, CA, D10, D12, D14, D15, ED40,
I60, I500, I600, Replaces: 70233186
USA made NOTE: 2 used per tractor;
Sold individually.
Rear axle, parts continue on next page
53
Allis
Chalmers
Chassis parts
Rear axle, parts cont...
Order #
Price
ACS2612
$14.50
ABC1543 $13.95
PTO parts cont...
Description / Application
Final Drive Pan Gasket (OEM)
Fits: WC, WD, WD45, D17
Replaces: 247874, 70247874
USA made
Outer Differential Shaft Oil Seal
Fits: D10, D12, D14, D15; Industrials: 500,
510, 512, 600, 610, 612, 614, 615, 621, I60,
I600, Replaces: 70244961
(1.375" I.D., 2.378" O.D., .312" width)
USA made NOTE: 2 used per tractor;
Sold individually.
Price
ACS272
$68.50
ABC2039
$7.95
$64.50
Step Assembly
Fits: CA
(16-1/2" o/a length, 5" pad width)
NOTE: Mounts to left side of torque tube.
Description / Application
NEW! Belt Pulley Shaft Oil Seal
Fits: B, C, CA, IB, Replaces: 70225450
(2.506" O.D., 1.375" I.D., .372" wide)
USA made
NOTE: Narrower than original.
Oil Seal fits: Some B, C, CA, D10 - D19,
H3 - I600, 170 - 7000 (All w/ 1-3/8" single
speed PTO assy), Replaces: 70241779
(2.130" O.D, 1.375" I.D., .437" wide)
Description / Application
Step (Aftermarket part)
Fits: B, C
(16-1/2" o/a length, 5" pad width)
NOTE: Mounts to square bar by pedals.
ACS1977
Price
$17.85
ABC1543
Steps - USA made
Order #
Order #
IHS1545
$13.95
EACH
Seal fits: RC, WC, WF
Replaces: 70244961
(1.375" I.D., 2.378" O.D., .312" width)
USA made
ABC1543 Applications:
PTO Output Shaft Retainer Seal fits: RC, WC, WF
NOTE: 2 used per tractor, Sold individually.
PTO Gearbox Stub Shaft Seal fits: WC, WF up to 1935
NOTE: 2 used per tractor; Sold individually.
Belt Pulley Drive Seal fits: WC up to SN: 74330, WF up to SN:
1336
Front wheel bolt
Fits: B, C, CA, D10, D12, D14, D15, D17,
D19, D21, RC, WC, WD, WD45, 160, 170,
175, 180, 185, 190, 190XT, 200, 6060, 6070,
6080, 7000, I-40, I-400, I-60, I-600
Replaces: 70207503, 70256906
(1/2" - 20 NF, 7/8" thread length,
13/16" hex head) USA made
PTO parts
Order #
Price
ACS280
$68.50
ABC221
MIS118
MIS138
54
$4.50
$48.50
$48.50
Description / Application
PTO Shield
Fits: D14, D15, (D17 up to series IV)
Replaces: 70228549
USA made
NOTE: Powder coat Persian orange #1.
Description
PTO Knob
Fits: RC, WC, WD, WD45
Replaces: 70206456
(3/8" - 24 NF)
USA made
Price
Wheel clamp lock nut
PTO Over-Running Clutch (1-1/8 Female)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C670F
(1-1/8" - 6 x 1-3/8", 6 spline)
PTO Over-Running Clutch
(1-3/8" Female & Male)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C660F
(1-3/8" - 6 x 1-3/8", 6 spline)
Order # Front Wheel Lug Bolt............................................ABC399............... $2.00
NOTE: 5 to 6 used per rim; Sold individually.
(For Axle Shaft & Front Wheel)
Fits: B thru 7000 (All w/ regular axle except
D21, 210, 220)
(3/4"-16 UNF thread)
Description
Order # Price
Front Wheel Clamp Lock Nut .............................ABC254............... $19.50
NOTE: No re-threading necessary on worn shafts. Check size
before ordering.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
Price
ACS1177
$17.95
ABC270
$12.95
$4.95
Front Wheel Seal fits: B, C, CA, D10, D12
Replaces: 70207365 (2.563" O.D., 1.4735"
I.D., 0.5868" tall) NOTE: Steel & felt.
Improved design. This Steiner exclusive
is the best fitting wheel seal in the
aftermarket and is half the price of the
OEM seal.
Front Wheel Oil Seal
Fits: G, Replaces: 70800445
(0.388" wide, 2.047 O.D.)
NOTE: 2 used per tractor; Sold
individually; (this seal is .060 smaller in
O.D. than the original, customers using
this seal use RTV or FORM-A-GASKET
on the outside of the seal to compensate
for the difference).
Front Hub Seal fits: D10 SN: 3501 - 9000,
D12 SN: 3001 - 9000, D14, D15 up to SN:
9000, D17 up to SN: 42000, RC, WC, WD,
WD45, WF (All w/ felt front hub seals)
Replaces: 70202104 (3.156" O.D., 2" I.D.,
.375" thick) USA made
NOTE: Felt.
To determine the width of Wheels / Rims: Measure the inside
(bead to bead) not outside to outside.
Order #
Price
3" x 12" Front Wheel w/ Blank Center
Fits: G
Replaces: 70800047
ACS010
$66.95
ACS009
$74.50
IHS193
$60.95
Wheel bearing kits
NOTE: 2 used per tractor; Sold individually.
Order #
Price
ACS1789
$52.65
Description / Application
Front Wheel Bearing Kit
Fits: B SN: B-101 & up, IB, C, CA, (D10 up
to SN: 3501 & SN: 9001 & up), D12 up to
SN: 3001 & SN: 9001 & up
Replaces: 70228459 NOTE: 2 used per
tractor; Sold individually. Seals sold
separately, order ACS1177.
ACS1793
$58.05
Front Wheel Bearing Kit w/ Seal
Fits the following w/ 5 bolt front hub: D10
SN: 3501 & up, D12 SN: 3001 & up, D10,
D12 high clearance up to SN: 3501, D14
wide front only, D15 up to SN: 9001, D17
up to SN: 42001, RC, WC, WD, WD45
Replaces: 70228458 NOTE: 2 used per
tractor; Sold individually.
WHS042 $65.60
3" x 15" Front Wheel (5 Lug)
Fits: B, C, CA, D10, D12
Replaces: 70231520
(2-3/4" pilot, 2-5/8" bolt center to center)
USA made
Front Wheel (5 Lug)
Fits: (D10, D12 when equipped w/ 16" rim),
D14, D15, Early D17, WC, WD, WD45, WF
Replaces: 70232832 (4.25" x 16", 3-3/8" pilot,
3" bolt center to center) USA made
NOTE: Not recommended for tractors w/
loaders. We recommend new lug bolts &
retorque lug bolts periodically.
4.25" x 16" Front Wheel (Blank Center)
Fits: WF
Replaces: 70206134
(13.465" I.D.)
USA made
6" x 15" Front Wheel (6 Lug)
Fits: Allis Chalmers models
(6" bolt circle, 4.625" pilot hole, 4-3/4" back
spacing)
USA made
WHS022 $71.50
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some Late D15, D17, D19, 160
thru 190XT, 6060, 6070
Replaces: 70235086, 70248460
(4.5" x 16", Pilot hole = 4.625", 6" bolt circle,
4" back spacing) USA made
NOTE: For 5:50 x 6:00 x 16" tires.
WHS043 $82.75
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some D17 SN: 75001 & up, D19,
160, 170, 175, 180, 185, 190, 190XT, 200,
6060, 6070, 6080, 7000, I60, I600 & others
using 6" x 16" 6 lug rim, Replaces: 70235727,
70237405 (6" x 16", Pilot hole = 4.625",
6" bolt circle, 4-3/4" back spacing)
USA made
WHS070 $86.45
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some 160 thru 7000 series
(All w/ 8" x 15" 6 lug rim)
Replaces: 70255499 (8" x 15", 6" bolt circle,
4.625" pilot, 4-3/4" back spacing)
USA made
What is back spacing?
To determine back spacing lay your
wheel flat on the ground with the back
of the wheel facing up. Lay a straight
edge across the wheel & measure the
distance from the back side of the
mounting surface to the straight edge.
(I.E. The wheel pictured has a back
spacing of 3-5/8").
Description / Application
WHS023 $64.95
Chassis parts
ACS2085
Description / Application
Allis
Chalmers
Front wheels / rims
Front wheel seals
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
55
Allis
Chalmers
Tires, tubes
Rear rim bolts, part cont...
NOTE: Tubes are for BIAS ply
Order #
tires only, not for radial
MIS063
tires. Also not for recreational
use. Need a tire or tube not listed?
Price
(5/8 x 18 x 2-1/2" NF Carriage bolt)
USA made
NOTE: 6 used per rim; Sold individually.
Chassis parts
Call technical service.
Order #
Price
Description / Application
$3.75
Rear Rim Bolt Assembly w/ Nut
EACH Fits: RC, WC, Early WD w/ 28" Rear Rim
Description / Size
WHS057
$52.15
Triple rib, Tire only fits: G
(4.00 x 12")
WHS051
$16.45
Tube only (For 4.00 x 12" & 4.80 x 12"
Tire) fits: G
WHS052
$83.75
Triple rib, 6 ply Tire only
For 3" x 15" Wheel (5.00 x 15")
WHS053
$14.80
EACH
Tube only
(For 4.00, 5.00, 5.50 x 15" Tires)
WHS047
$91.95
Triple rib, 6 ply Tire only
(5.50 x 16")
WHS048
$105.75
Triple rib, 4 ply Tire only
(6.00 x 16")
WHS049
$110.95
Triple rib, 6 ply, Tire only
(6.50 x 16")
WHS050
$15.25
EACH
Tube only
(For 5.50, 6.00, 6.50 x 16" Tires)
WHS060
$37.95
EACH
Rear Tube only
(For 7.50, 8.3, 9.5 x 24" Tires)
WHS059
$53.75
EACH
Rear Tube only
(For 11.2, 12.4 x 24" Tires)
WHS058
$56.55
EACH
Rear Tube only
(For 11.2, 12.4 x 28" Tires)
ACS274
WHS061
$80.25
EACH
Rear Tube only
(For 13.6, 14.9 x 28" Tires)
ACS281
WHS062
$56.95
EACH
Rear Tube only
(For 9.5 x 32" Tires)
Description
WHS063
$64.95
EACH
Rear Tube only
(For 11.2, 12.4 x 34" & 36" Tires)
Clamp (Eccentric Style)......................................... ACS274 ..............$24.85
WHS064
$65.25
EACH
Rear Tube only
(For 11.2, 12.4 x 38" Tires)
WHS2513
$89.95
EACH
Rear Tube only (For 12.00 x 38", 13.00 x
38", 13.6 x 38", 14.00 x 38", 14.9 x 38",
15.5 x 38" tires)
MIS121
ABC397
Price
$2.00
MIS061
56
$3.65
$2.75
Rear Rim Lug Bolt
EACH Fits: D10, D12, D14, D15, D17, WD, WD45,
Rear rim / wheel clamps, part
ACS276
Fits: B SN: 58401 & up, IB, C
ACS276 Replaces: 70210215
ACS274 Replaces: 70210216
ACS281 Replaces: 70210218
Order # Price
Clamp (Plain Style)................................................ ACS276 ..............$24.85
Eccentric Bolt........................................................... ACS281...............$14.45
NOTE: 4 used per tractor; Sold individually.
Rear tire inner tube valves, nut
NOTE: Sold individually.
Price
ABC531 $5.15
EACH
Rear rim bolts, part
Order #
Flat Washer (For MIS063)
(5/8" I.D.)
170, 175, 180, 185, I-40, I-400, I-60, I-600
(All w/ stamped steel dish)
Replaces: 70225191, 70251815
(9/16" x 18 NF, 1-1/8" thread length,
7/8" hex head) USA made NOTE: Sold
individually. Can also work for front on
some applications.
Order #
ABC399
$0.50
EACH
Description / Application
Rear Wheel Lug Bolt
Fits: G, Replaces: 70207503 & 70256906
(1/2" - 20 NF, 7/8" thread length, 13/16"
hex head) USA made NOTE: 5 used per
rim; Sold individually.
ABC384 $5.15
EACH
Rear Rim Bolt Assembly w/ Nut & Washer
Fits: RC, WC, Early WD w/ 28" Rear Rim
(3-1/2" NC hex head bolt w/ washer)
NOTE: 6 used per rim; Sold individually.
ABC385 $1.50
EACH
Description / Application
Rear Tire Inner Tube Valve
(Air / Water Valve) (New Style)
Fits: Tractor tubes w/ Internal threads
Rear Tire Inner Tube Valve
(Air / Water Valve) (Old Style)
Fits: Tractor tubes w/ External threads
Brass Nut (For Rear Tire Inner Tube Valve)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
To determine the width of Rims / Wheels: Measure the inside
(bead to bead) not outside to outside.
Price
$250.75
WHS031
$250.75
WHS026
$250.95
WHS016
WHS004
$148.05
$155.00
WHS1613 $235.95
WHS024
$305.20
Description / Application
Order #
MHS038
Price
$3.50
Rear Rim (4 Dimple, 2 Blocks)
Fits: B, IB, C
Replaces: 70211201
(8" x 24)
NOTE: Like original
Rear Rim (6 Loops)
Fits: Some ED40, RC, WC, Early
WD w/ 9" x 28" 6 loop rim
(9" x 28")
Rear Rim (6 Loops)
Fits: Some ED40, RC, WC, Early
WD w/ 10" x 28" 6 loop rim
Replaces: 721299
(10" x 28")
Flat Base Rear Rim (Blank Center)
(For Stamped Steel 9 Bolt Pattern Rims)
Fits: Allis Chalmers models
(10" x 38") NOTE: Bare finish.
Customer must reuse old center.
Must weld or rivet.
Rear Rim (Double Bevel)
Fits: Some D21, 190, 190XT, 200, 7000,
others w/ 14" x 38" double bevel rim
Replaces: 70235523
(14" x 38")
NOTE: Has 18 drive lugs.
NOTE: Stop holes are angled.
Order #
Price
ACS027
$420.00
Fits: Some CA, D10, D12
Replaces: 70225184
(10" x 24")
USA made
WHS007
$420.75
Fits: D14, D15
Replaces: 70228211, 70232580
(12" x 26")
USA made
ACS028
$420.00
Fits: Some D14, D15, WD, WD45,
etc., Replaces: 70220011
(11" x 28")
USA made
ACS026
$435.00
Fits: Some WD, WD45, 160, others
Replaces: 70226270
(12" x 28")
USA made
WHS008
$450.50
Fits: D17, Some WD45, 170, 5040,
5045, 5050, 6140, others
Replaces: 70237573
(13" x 28") USA made
NOTE: Rails are drilled for both
style stops (1 rail for MIS109 & 1
rail for MIS108).
MIS109
$14.95
Rear Spinout Rim Stop
(For Parallel Drilled Rim Rail)
Fits: Allis Chalmers model
Replaces: 70219456
MHS037
Price
$90.00
MIS108
$16.50
Rear Spinout Rim Stop
(For 90° Drilled Rim Rail)
Fits: Allis Chalmers model
Replaces: 70232274, 70230832
USA made
NOTE: Will not fit the rims that we sell.
MIS110
$8.95
Stop Bolt (For Rear Spinout Rim Stops)
Fits: Allis Chalmers models
Replaces: 70218662, 70225190, 72073627
USA made
NOTE: Sold individually.
Description / Application
Front Wheel Weight
Serviceable for B, C, CA & All 3" x 15"
(5 Hole) rims
NOTE: Sold indvidually.
Description / Application
NOTE: Use MIS109 for the listed spinout
rims.
Front wheel weights, parts
Order #
J-Hook (For MHS037 Weight)
NOTE: 4 J-Hooks required per weight;
Sold individually.
Rear spinout rims, parts
Rear Rim (4 Dimple, 2 Blocks)
Fits: B, IB, C
Replaces: 70212169
(10" x 24)
NOTE: Like original.
Rear Rim (6 Dimple, 2 Blocks)
Fits: RC, WC SN: 81757 & up,
Early WD, WF SN: 1904 & up
Replaces: 70209464
(10" x 28)
NOTE: Like original
Description / Application
Chassis parts
Order #
WHS030
Front wheel weights, parts cont...
Allis
Chalmers
Rear rims / wheels - USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
57
Allis
Chalmers
Chassis parts
Front weights, parts
Order #
Price
ACS180
$158.50
ACS234
$36.95
ACS238
$175.00
Drawbars, parts
Description / Application
Front Weight fits: D15, D17, D19, RC,
WC, WD, WD45 gas, LP, WF, Replaces:
70227272, Casting #AM4162-3
NOTE: Will not fit WD45 diesel.
2-Piece Anchor Kit (For ACS180 Weight)
Fits: RC, WC, WD, WD45 gas, LP only, WF
Replaces: 70227273 (LH), 70227274 (RH)
NOTE: Kit contains LH / RH.
3-Piece Weight Bracket Kit
(For ACS180 Weight)
Fits: D15, D17, D19
Replaces: 70239528 (LH), 70239529 (RH),
70236049 (front) USA made
ACS241
$16.50
Anchor Rod fits: RC, WC, WD, (Correct
for WD45 gas, LP only, WF, Replaces:
70227275 (7-3/4" o/a length)
NOTE: Holds up to (3) ACS180 weights.
ACS239
$18.95
Anchor Rod fits: D15; Correct for D17, D19
Replaces: 70236047
(9-1/4" o/a length)
NOTE: Holds up to (4) ACS180 weights.
Order #
Price
ACS347
$24.95
ACS269
$6.95
Snap Coupler Spring
Fits: D10, D12, D14, D15, D17, D19, WD,
WD45, 190, 190XT, Replaces: 70235881 &
327360 (3-1/4" o/a length)
NOTE: 4 used per tractor;
Sold individually.
ABC2010
$24.00
Adjustable Stabilizer Bar
(For tractors w/ Category I 3-point)
Adjustable from 27-1/2" to 37" length,
23" center tube length, 7/8" threaded
ends, 7/8" pin holes NOTE: Adjustable
ends for desired length. Normally 2 used
per tractor; Sold individually.
FDS022
$46.95
Standard Drawbar Category 1
Fits: D10 thru D15, 5015 thru 6040
Replaces: 70234854
(1" x 2-1/2" x 26", 7/8" pin size)
FDS211
$29.99
ABC1431
ABC1427
Price
$1.90
$3.25
Description / Application
Category 1 3-Point Top Link Pin
Fits: Allis Chalmers models
(3/4" O.D., 2-3/4" usable length,
4-5/8" o/a length)
Category 1 3-Point Top Link Pin
Fits: Allis Chalmers models w/ a Category
1, 3-point hitch (3/4" O.D., 4-3/4" usable
length, 6-1/2" o/a length)
ABC1429
$4.25
Category 2 3-Point Top Link Pin
Fits: Allis Chalmers models w/ a Category
2 (3-point hitch) (1" O.D., 4-1/4" usable
length, 6" o/a length)
MIS119
$0.35
3-Point Lynch Pin
Fits: Allis Chalmers models equipped
w/ a 3-point hitch using a .420" dia. pin
Replaces: 70244066
(1-5/8" usable length)
FDS023
FDS346
58
$23.50
$39.45
Snap Coupler Repair Kit (13 pcs)
Fits: D10, D12, D14, D15, D17, D19, WD,
WD45, 190, 190XT
NOTE: 2 kits used per tractor; Sold
individually. See website for contents.
Drawbar Lock Category 1
(For FDS022)
3-point top link pins, parts
Order #
Description / Application
Top-Link Category 1
Adjustable w/ forged ends & 3/4" hole
Fits: Allis Chalmers models
(16" tube length)
Top-Link Category 2
Adjustable w/ forged ends & 1" hole
Fits: Allis Chalmers models
(16-3/4" tube length)
ABC1433
$2.15
ACS310
$64.95
ACS356
$132.95
ACS261
$284.50
3-Point Lift Arm Category 2 to a Category
1 3-Point Hitch Reducer Bushing
Fits: Allis Chalmers models
(1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)
Drawbar fits: G (Exact for up to SN:
26750) (Will work on SN: 26751 & up)
Replaces: 70800455
(21-3/16" drawbar length)
USA made
Drawbar Guide Assembly
Fits: WD, WD45
Replaces: 70226522
USA made
Drawbar Yoke Assembly
Fits: D14, D15, D17 (series I, series II and
also series III w/ snap coupler hitch)
Replaces: 70232074, 70232073, 70231146,
70224650 USA made
NOTE: Can be used for heavy duty
applications for D14 & D15.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Order #
ACS015
ACS016
Description / Application
$548.50
NEW! 3-Point Hitch Conversion Kit
Fits: B, C (Category 1)
NOTE: Complete w/ hydraulic cylinder,
shortened adjustable top link & bracket.
Tractor must have hydraulics to use this
conversion. Bolts onto drawbar.
$420.00
$34.75
NEW! 3-Point Hitch Conversion Kit
Fits: D14, D15, WD, WD45
(Category 1) NOTE: Snap coupler
drawbar must be removed to install, Top
link & top link bracket not included.
NEW! Top Link Bracket
Fits: CA, WD, WD45
NOTE: Bolts around rockshaft. 7/8"
diameter hole for Category 1 toplink.
ACS017
$60.00
NEW! Top Link Bracket
Fits: D14, D15
NOTE: 7/8" diameter hole for Category 1
toplink.
ACS013
$450.00
NEW! 3-Point Hitch Conversion Kit
Fits: D17, D19, 190, 190XT
(Category 2) NOTE: Snap coupler
drawbar must be removed to install, Top
link & top link bracket not included.
ACS018
$79.50
NEW! Top Link Bracket
Fits: D17 (except series IV)
NOTE: 7/8" diameter hole for Category 1
toplink.
ACS020
$85.00
NEW! Top Link Bracket
Fits: D17 Series IV and 190, 190XT
NOTE: Welded steel, not cast. 7/8"
diameter holes for category 1 toplink.
Awesome in size & realism, these yard /
garden spinners share the exact detailing
as the real thing! Made with fade resistant
TM
®
SolarMax & SunTex fabric each spinner
withstands daily UV rays, rain & snow.
Includes a heavy duty fiberglass pole &
ground stake. Licensed.
Description
Order # Chassis parts / Miscellaneous
ACS011
Price
Allis
Chalmers
Tractor spinner
3-point conversions, parts - USA made
Price
Allis Chalmers Spinner .......................................MIS130............. $77.75
(WD, WD45 style; 48" x 28", 18-1/2" dia.)
Mylar decals - USA made
(Unless otherwise noted):
INSTRUCTIONS: Have the pitted area filled, sanded smooth
& painted. Paint must be completely dry prior to installation
(usually 3 - 4 weeks). Wash area with soap & water (new paint
included) on which decal is to be placed.
FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to
border of design where possible prior to removing white
backing paper. Lightly spray the area with window cleaner (do
not use window cleaner in aerosol can). Peel white backing
paper from decal and place in position. Squeegee window
cleaner from under decal beginning in center and working
outward. If air bubbles occur, puncture with pin & smooth
down. Please note: These decals have been printed on a tough
mylar film using mylar ink. A pressure sensitive adhesive
has been employed on the back of the mylar to insure good
adhesion to any clean, hard surface.
FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING)
SPECIAL ORDER ONLY: Peel backing paper from decal. The
decal will be stuck to the application paper. Align the decal
using the design, not the application paper, and firmly press
decal into place. Slowly remove the application paper starting
at one corner. Please note: The colors are fused into the vinyl
eliminating stacking.
Caution: Inspect all decal pieces before applying to tractor.
NO REFUNDS on mylar decals if applied to surface and/or if
damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry
place. Do not soak in water.
Deluxe tractor umbrellas
ABC2372
ABC2362
Description
Four oil-tempered spring steel bows are
locked into place with individual spring
clips, providing ease of operation and
a rigid framework for the cover. Frame
constructed of tubular steel. All metal
parts, including frame and mounting
brackets, zinc plated for rust resistance
and lasting appearance. 54" square cover
is made of durable polyester material.
Each corner is double reinforced and
has heavy steel grommets. Complete
with universal mounting bracket. Can
be mounted on side of fender, rear end /
axle housing, foot platform.
Order # DEC465
DEC288
DEC215
DEC055
Allis did not use model symbol decals before 1951. The model
symbol decal drawings were made in June 1951 & included the
B, CA, WD. The decals had a clear background w/ black letters.
Order #
Price
Application
DEC465
$7.50
Allis Chalmers square (4-1/2" x 4-1/2)
DEC051
$40.00
B (up to & including 1939) (Blue w/ Long
A & S)
DEC288
$25.00
B (1939-44) (Black w/ Long A & S)
NOTE: Allis did not use model symbol
decals before 1951. The model symbol
decal drawings were made in June 1951
and included the B, CA, WD. The decals
had a clear background, black letters.
Price
Orange Deluxe Umbrella w/ Brackets ..............ABC2372........... $192.80
White Deluxe Umbrella w/ Brackets .................ABC2362........... $192.80
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Mylar decals continue on next page
59
Allis
Chalmers
Miscellaneous
Mylar decals - USA made cont...
Mylar decals - USA made cont...
(Unless otherwise noted):
Order #
Price
Application
DEC255
$25.00
B (1944 & up) (Black w/ Even letters)
DEC052
$25.00
C (1944 & up), Replaces: 213322
(Black w/ Even letters)
NOTE: Allis did not use model symbol
decals before 1951. The model symbol
decal drawings were made in June 1951
and included the B, CA, WD. The decals
had a clear background, black letters.
DEC053
$25.00
CA, Replaces: 225338
(Black) NOTE: Allis did not use model
symbol decals before 1951. The model
symbol decal drawings were made in
June 1951 and included the B, CA, WD.
The decals had a clear background, black
letters.
DEC301
$48.00
D10 series I up to SN: 1950 (1959-60)
Replaces: 234495
DEC302
$48.00
D12 series I up to SN: 1950 (1959-60
w/ black bar grille), Replaces: 234495
DEC354
$56.00
D14 up to SN: 18230 gas (1957-59)
Replaces: 232596
(Silver w/ black border; Oval model letter)
DEC214
$48.00
D14 series I SN: 19001 & up (1959 & up)
Replaces: 233542
(Black letter w/ black border)
DEC303
$48.00
D15 series I up to SN: 13000 (1960-62)
Replaces: 233542
DEC356
$56.00
D17 gas up to SN: 24000 (1957-59)
Replaces: 230280
(Oval model letter)
G
DEC433
$46.00
G (Vinyl cut)
DEC049
$40.00
RC (Blue) NOTE: RC letters are NOT
included. Available by special order only.
DEC047
$40.00
WC (1934-38) (Blue w/ Border)
NOTE: Serviceable for 1933 but blue
letters instead of black, has long 'A' & 'S'
letters. Allis did not use model symbol
decals before 1951. The model symbol
decal drawings were made in June 1951
and included the B, CA, WD. The decals
had a clear background, black letters.
WD (Black)
DEC438
$80.00
WD (Black) Vinyl cut
Replaces: 226503
DEC055
$44.00
WD45 (Black)
60
WF (1937-40)
(Blue w/ long A & S & w/ Border)
DEC254
$40.00
WF (after 1940) (Black w/ long A & S)
Data book
Allis Chalmers Farm Tractors & Crawlers
Data Book by Terry Dean
Put everything you need to know about
Allis Chalmers tractors in your hip pocket!
Beginning with the model 10-18, this book
covers all major Allis Chalmers tractor
and Crawler models produced up through
1963. Packed with specs, serial numbers,
engine codes, dates of manufacture, decal
placement, options and original prices.
Ideal for auctions! (Sftbd., 4-1/2" x 7-1/2",
192 pgs., 60 b&w ill.)
Description
Order # Price
Allis Chalmers Data Book..................................... BOK074............. $19.95
restoration, you need an I & T Shop Service™ Manual. It will
$25.00
$25.00
$40.00
exploded views and photos. If you are in serious repairs or
DEC056
DEC054
DEC050
information as to specifications, torques, etc. illustrated by
D17 SN: 24001 to 31625 gas only (1959-60)
(All w/ black bar grille), Replaces: 232600
WC (1941-48) (Black)
WD45 diesel (Black)
a mechanic with an easy to use format. They include valuable
$48.00
$40.00
$54.00
are authentic manuals that deal with repairs in the language of
DEC215
DEC289
WD45 (Black) Vinyl cut
DEC383
apart, how to fix it and how to put it back together again. These
D17 diesel up to SN: 24000
Replaces: 230279 (Oval model letter)
WC (1939-40) (Blue w/ Long A & S)
Application
An I & T Shop Service™ Manual tells you how to take a tractor
$60.00
$40.00
Price
$80.00
I & T Shop Service™ manuals - Printed in USA
DEC357
DEC048
Order #
DEC439
offer many short cuts and save you time!
AC11
Order #
Price
AC202
AC201
Application
AC11
$31.95
B, C, CA, G, RC, WC, WD, WD45 diesel,
WF
AC201
$34.95
Allis Chalmers Collection: D10, D10 series
III, D12, D12 series III, D14, D15, D15 series
II, D17, D17 series III & IV, 160, 170, 175
NOTE: Includes electrical wiring
diagrams.
AC202
$34.95
Allis Chalmers Collection: D19, D19
diesel, D21, D21 series II, Two-Ten, TwoTwenty, 180, 185, 190, 190 XT, 200, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060,
7080 NOTE: Includes electrical wiring
diagrams for D19, D21, 180, 185, 190,
190XT, 200, 210, 220, 7000. Does not
include electrical diagrams for 7010 thru
7080.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
An Operator’s Manual (reprints only) sometimes referred to as
the Owner’s Manual is the manual that came with the tractor. It
is the manual that was given to the ultimate consumer by the
Order #
Price
REP2643 $14.95
manufacturer. It can be compared to the manual you receive
in the glove box of a new car. This manual gives the ownercrankcase, etc.) and adjustment procedures (brakes, clutch, etc).
Application
Char-Lynn Power Steering (Owner's
manual) NOTE: Includes installation,
operation, maintenance & trouble
shooting information on the pump &
torque generator.
Miscellaneous
operator instructions, shift patterns, capacities (anti-freeze,
Allis
Chalmers
Operator, Service manual reprints cont...
Operator manual reprints
This is a very useful and valuable tool in operating your tractor.
Parts manual reprint - Printed in USA
Service manual reprints
A Parts Manual (reprint only) has exploded views of all parts
A Service Manual Reprint with wiring diagrams tells you how
on the tractor. With numbered pictures giving you great detail
to take the tractor apart, how to fix it and how to put it back
on assembly and disassembly. It also gives you a guide, with
together again. It is a reprint of the manual that the factory
numbers, for ordering parts, and makes you seem much more
furnished the dealer’s shop service department, and was not
informed when talking with a dealer. Many service manuals,
sent or given to individual retail customers. It deals with repairs
after telling you how to disassemble & repair in detail, will
in the language of a mechanic. Often times it includes valuable
simply say "reassemble". If you have your PTO in the wash tank,
information as to specifications, torques, etc. A service manual
in pieces, without notes, you have a problem. The parts manual
reprint will offer many short cuts and save you time!
can help you out with an exploded view of the PTO unit, and
you can see immediately how it all goes back together. You
need a parts manual!
REP031
REP033
REP034
REP035
Order #
Price
REP031
$15.50
Application
B (Operator’s Manual)
REP032
$15.50
C (Operator’s Manual)
REP036
$19.95
B & C (Service Manual)
NOTE: Includes electrical wiring diagram.
REP033
$15.50
CA (Operator’s Manual)
NOTE: Includes electrical wiring diagram.
REP037
$19.00
CA (Service Manual)
NOTE: Includes electrical wiring diagram.
REP094
$23.95
D14 (Service Manual)
NOTE: Includes electrical wiring diagram.
REP034
$15.50
G (Operator’s Manual)
NOTE: Includes electrical wiring diagram.
REP039
$19.50
G (Service Manual)
NOTE: Includes electrical wiring diagram.
REP093
$24.95
G (Implement setup, maintenance & repair
manual)
REP2967 $18.95
NEW! RC (Operator & Parts)
Replaces: TPL72
REP035
$15.50
WC 1935 (Operator’s Manual)
REP002
$15.50
WC 1939 (Operator’s Manual)
REP038
$19.50
WC (Service Manual)
NOTE: Includes electrical wiring diagram.
REP003
$15.50
WD (Operator’s Manual)
NOTE: Includes electrical wiring diagram.
REP001
$15.50
WD45 (Operator’s Manual)
NOTE: Includes electrical wiring diagram.
REP092
$18.95
WD & WD45 (Service Manual)
NOTE: Includes electrical wiring diagram.
REP1734
REP1813
REP1817
Order #
Price
REP1734
$49.95
B, C
REP1815
$47.95
CA
REP1813
$50.95
D14 up to SN: 19000
REP1817
$34.95
G
REP1737
$47.95
WC, WF
REP1739
$50.95
WD, WD45 gas, LP, diesel
REP1739
Application
Engine rebuild videos
USA made
Shows how to completely rebuild the
tractors' engine. You will see the engine
disassembled down to the bare block & then
rebuilt step by step is an easy format
Tune-up videos - USA made
Includes rebuilding the carburetor &
distributor, oil & filter change, brake
adjustment & more!
VHS videos are on CLOSE OUT
D = DVD
Order #
Price
VID13
$18.00
VID13D
$20.00
VID14D
$20.00
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Application
WC, WD, WD45, WF, WI, WS
(Engine Rebuild DVD)
WC, WD, WD45, WF, WI, WS
(Tune-Up DVD)
61
Download PDF