Moxa Technologies | DA-683 Series | DA-682A Series

Power Substation Computers
DA-682A Series
X86 2U 19 inch rackmount computer with Intel® i7 CPU, 6 Gigabit
Ethernet ports, 2 PCI expansion slots, fanless design
››2nd generation Intel core processors (Sandy Bridge)
››Built-in DDR3 SDRAM and industrial DOM
››6 Gigabit Ethernet ports for network redundancy
››2 PCI expansion slots for expansion modules
››1 CompactFlash socket for storage expansion
››4 high speed, system-bootable USB 2.0 ports
››19 inch 2U rack-mountable case
››100/240 VAC power inputs
››Ready-to-Run Linux or Windows Embedded Standard 7 platform
››Fanless design
Overview
The DA-682A series of computers are x86 platforms with VGA, 6
Gigabit Ethernet ports, CompactFlash, USB, and two PCI ports for DA
Series expansion modules. The DA-682A comes in a standard 19 inch
2U rack-mountable case.
With their robust design, DA-682A computers are specialized for
industrial automation applications: power substations, transportation
and shipping, and oil and gas production and supply.
The DA-682A runs either Linux or Windows Embedded Standard
7, providing a friendly environment for developing sophisticated
application software. Moxa’s ready-to-run software and readily
available after-service support makes the programmer’s job easier,
helping programmers develop bug-free code quickly and at a lower
cost. In addition, the DA-682A also comes with three different CPU
options, and basic models that allow system designers to install
the DOM, RAM, and operating system according to their specific
requirements. This is particularly flexible for building custom industrial
solutions.
The DA-682A comes with 2 PCI ports that accept DA series expansion
modules. Moxa provides a variety of communication modules for
the DA series, including an 8-port RS-232/422/485 module, a 4-port
10/100 Mbps LAN module, and a universal PCI expansion module.
This friendly design gives users the advantage of being able to swap
out modules quickly and easily, making the DA-682A an ideal solution
for a wide array of industrial automation applications.
Appearance
Module A
Module B
LED x 16
LED x 16
(Serial/LAN) (Serial/LAN)
Programmable
USB 2.0
LED x 8
Host x 2
Front View
Rackmount Ear
1
Power LED
Storage LED
Ethernet
Reset Button Rackmount Ear
LED x 12
w w w. m o x a . c o m
info@moxa.com
Power Substation Computers
Module Slot A
Module Slot B
Power Button
P1
Rear View
ON/OFF
Grounding
Connector
P2
Module A
LAN1
VGA USB 2.0
Host x 2
Module B
LAN2
LAN3
LAN4
LAN5
AC 100-240V~
( T 2A/250V)
LAN6
Power LED/Storage LED
10/100/1000 Mbps
Ethernet x 6
Power Input
(100-240 VAC)
Hardware Specifications
Computer
CPU: 2nd generation Intel core processors (Sandy Bridge)
• Intel Celeron 827E, 1.4 GHz single core processor
• Intel Celeron 847E, 1.1 GHz dual core processor
• Intel Core i7-2610UE, 1.5 GHz dual core processor
OS (pre-installed): Linux or Windows Embedded Standard 7
System Chipset: Intel HM65
BIOS: 64 Mbit Flash BIOS, PCI Plug & Play, ACPI
System Memory: 4 GB capacity, 1 GB (Linux), 2 GB (Win7) preinstalled: 1 slot of 4 GB DDR3-1066/1333 SO-DIMM SDRAM M
USB: 4 USB 2.0 ports, system bootable, type A connector
Storage
Built-in: 2 GB (Linux), 8 GB (Win7) industrial DOM for read-only OS
volume
Storage Expansion:
• 1 x CompactFlash socket
• 2 x SATA-300 connector
Display
Graphics Controller: Integrated graphics with built-in Intel 915GME,
and built-in Intel Extreme Graphics 2 technology
Display Memory: Dynamic video memory (shares up to 32 MB of
system memory)
Display Interface: CRT Interface for VGA output (DB15 female
connector)
Resolution: CRT display mode with pixel resolution up to 2548 x 1536
at 75 Hz
Ethernet Interface
LAN: 6 auto-sensing 10/100/1000 Mbps Gigabit ports
Magnetic Isolation Protection: 1.5 KV built-in
LEDs
System: Power, Storage
LAN: 100/1000M mode
Programmable: 8 LEDs
Communication: Module A x 16, Module B x 16
Physical Characteristics
Housing: SECC sheet metal (1 mm)
Weight: 7 kg
Dimensions: 440 x 315 x 90 mm (17.32 x 12.40 x 3.54 in) (without
rackmount ears)
Mounting: Standard 19-inch rack
Environmental Limits
Operating Temperature: -10 to 60°C (14 to 140°F)
Storage Temperature: -20 to 80°C (-4 to 176°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Anti-vibration: 2 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr
per axis
Anti-shock: 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage: 100 to 240 VAC auto-ranging (47 to 63 Hz for AC input)
Power Consumption: 30 W (full loading)
Standards and Certifications
Safety: UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, CCC
(GB4943, GB9254, GB17625.1)
EMC: EN 61000-6-4, EN 61000-3-2, EN 61000-3-3, EN 55024, FCC
Part 15 Subpart B Class A
Green Product: RoHS, CRoHS, WEEE
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock) with battery
lithium backup
Automatic Reboot Trigger: Built-in watchdog timer, configurable for
restarts at 1 to 255 second intervals
Warranty
Warranty Period: 3 years
Details: See www.moxa.com/warranty
Switches and Buttons
Power Button: On/Off (on rear panel)
Reset Button: Soft reboot (on front panel)
Software Specifications
Linux
OS: Linux Debian 7
File System: EXT2, JFFS2
Internet Protocol Suite: TCP, UDP, IPv4, SNMPv1/v2c/v3, ICMP, ARP,
HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, Telnet, FTP,
TFTP, PPP, PPPoE
Internet Security: OpenVPN, iptables firewall
Web Server (Apache): Allows you to create and manage web sites;
supports PHP and XML
Secure Shell for Remote Access: SSH allows remote logins to a
secure encrypted console from any connected network
Dial-up Networking: PPP Daemon for Linux that allows Unix machines
2
to connect to the Internet through dialup lines, using the Point-to-Point
Protocol (PPP). Works with ‘chat’, ‘dip’, and ‘diald’, among (many)
others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
File Server: Enables remote clients to access files and other resources
over the network
Watchdog: A watchdog timer that triggers a system reset upon
software freezes, for both specific applications and system-wide
failures.
Application Development Software:
• Moxa API Library (Watchdog timer, Moxa serial I/O control)
• GNU C/C++ cross-compiler
• GNU C library
• Perl
w w w. m o x a . c o m
info@moxa.com
Power Substation Computers
Windows Embedded Standard 7
Core OS:
• Windows 7 Embedded, 32 bit
• Sensor and Location Platform
• Remote Procedure Call
Applications and Services Development:
• .Net Framework 3.5
• Remote Desktop Protocol 7.1
• COM OLE Application Support
• COM+ Application Support
• MSMQ
Internet Services:
• Internet Explorer 8.0
• IIS 7.0
File Systems and Data Storage:
• Windows Data Access Components
• Windows Backup and Restore
Diagnostics:
• Common Diagnostic Tools
• Problem Reports and Solutions
Fonts:
• Chinese (Trad. and Simp.), Middle East, South East Asian, and South
Asian Fonts
• True Type Fonts
Graphics and Multimedia:
• MPEG DTV-DVD Audio Decoder (MPEG-2, AAC)
• MPEG Layer-3 Audio Codecs(MP3)
• MPEG4 Decoders
• Windows Media Video VC-1 (WMV) Codecs
• DirectX and Windows Device Experience
• Windows Media Player 12
International:
• IME Simplified Chinese Support
• IME Traditional Chinese Support
Management:
• Group Policy Management
• Windows Management Instrument (WMI)
• Windows Update
Networking:
• Extensible Authentication Protocol (EAP)
• Internet Authentication Service
• Telnet Server
• Bluetooth
• Domain Services
• Network Access Protection
• Network and Sharing Center
• Quality of Service
• Remote Access Service (RAS)
• Telephony API Client
• Windows Firewall
• Wireless Networking
Security:
• Credential Roaming Service
• Credentials and Certificate Management
• Windows Authorization Manager (AZMAN)
• Windows Security Center
• Active Directory Rights Management
• Security Base
• Encrypted File System (EFS)
Embedded Features:
• Enhanced Write Filter(EWF)
• File-Based Write Filter (FBWF)
• Message Box Default Reply
• Registry Filter
• WSDAPI for .NET
Embedded Self-Health Diagnostics: SNMP-based remote scripting
layer for monitoring, reporting, and control
Dimensions
Unit: mm (inch)
315 (12.40)
440 (17.32)
90 (3.54)
3
w w w. m o x a . c o m
info@moxa.com
Power Substation Computers
Ordering Information
Available Models
Package Checklist
DA-682A-C0: Rackmount computer with Celeron 827E, 1.4 GHz, single core CPU, without DOM/
• DA-682A embedded computer
RAM/OS, VGA, 6 Gigabit LANs, USB x 4, CompactFlash socket
• Rackmount kit
DA-682A-C0-LX: Rackmount computer with Celeron 827E, 1.4 GHz, single core CPU, VGA, 6
• Documentation and software CD or DVD
Gigabit LANs, USB x 4, CompactFlash socket, 1 GB system memory, 2 GB Linux Debian 7
• Quick installation guide (printed)
pre-installed DOM
• Warranty card
DA-682A-C0-W7E: Rackmount computer with Celeron 827E, 1.4 GHz, single core CPU, VGA, 6
Gigabit LANs, USB x 4, CompactFlash socket, 2 GB system memory, 8 GB Windows Embedded Standard 7 pre-installed DOM
DA-682A-C1: Rackmount computer with Celeron 847E, 1.1 GHz, dual core CPU, without DOM/RAM/OS, VGA, 6 Gigabit LANs, USB x 4, CompactFlash
socket
DA-682A-C1-LX: Rackmount computer with Celeron 847E, 1.1 GHz, dual core CPU, VGA, 6 Gigabit LANs, USB x 4, CompactFlash socket, 1 GB system
memory, 2 GB Linux Debian 7 pre-installed DOM
DA-682A-C1-W7E: Rackmount computer with Celeron 847E, 1.1 GHz, dual core CPU, VGA, 6 Gigabit LANs, USB x 4, CompactFlash socket, 2 GB
system memory, 8 GB Windows Embedded Standard 7 pre-installed DOM
DA-682A-C7: Rackmount computer with Core i7-2610UE 1.5 GHz, dual core CPU, without DOM/RAM/OS, VGA, 6 Gigabit LANs, USB x 4, CompactFlash
socket
DA-682A-C7-LX: Rackmount computer with Core i7-2610UE 1.5 GHz, dual core CPU, VGA, 6 Gigabit LANs, USB x 4, CompactFlash socket, 1 GB
system memory, 2 GB Linux Debian 7 pre-installed DOM
DA-682A-C7-W7E: Rackmount computer with Core i7-2610UE 1.5 GHz, dual core CPU, VGA, 6 Gigabit LANs, USB x 4, CompactFlash socket, 2 GB
system memory, 8 GB Windows Embedded Standard 7 pre-installed DOM
Expansion Modules (can be purchased separately)
DA-SP08-I-DB: 8-port RS-232/422/485 serial module with a digitally isolated DB9 connector
DA-SP08-DB: 8-port RS-232/422/485 serial module with DB9 connector
DA-SP08-I-TB: 8-port RS-422/485 serial module with digitally isolated terminal block
DA-SP38-I-TB: 8-port RS-422/485 serial module with digitally isolated terminal block
DA-SW08-RJ: 8-port 10/100 Mbps unmanaged switch module
DA-LN04-RJ: 4-port 10/100 Mbps LAN module
DA-UPCI-DK: Universal PCI development kit
DA-FX04-MM-ST-T: 4-port (100BaseFX) fiber LAN module with multi-mode, ST connector, supports IP Teaming
4
© Moxa Inc. All Rights Reserved. Updated Dec. 4, 2013. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Power Substation Computers
DA Series Expansion Modules
Expansion modules with RS-232/422/485 and RS-232/485 serial ports,
10/100 Mbps LAN and unmanaged switch ports, 100 Mbps fiber LAN ports,
and PCI development kit
››PCI slots for interface expansion
››8-port RS-232/422/485 software-selectable serial modules with
isolation protection
››4-port 10/100 Mbps LAN module
››4-port 100 Mbps fiber LAN module
››8-port 10/100 Mbps unmanaged switch module
››Universal PCI expansion module
››8-port RS-422/485 serial module with terminal block connectors
››Fully compatible with Moxa embedded computers that have
peripheral expansion slots
Overview
Moxa’s peripheral expansion modules, which come with serial ports,
LAN ports, switch ports, and PCI slots, give end-users the greatest
flexibility for setting up industrial applications.
Different types of modules are available, including serial port modules,
LAN port modules, switch port modules, and PCI modules, and all are
fully compatible with Moxa’s embedded computers that come with
perpheral expansion slots.
The serial port modules include an 8-port RS-232/422/485 module
with either DB9 or terminal block connectors, and an 8-port RS422/485 module with terminal block connectors. Some modules are
even designed with 2 KV digital isolation, making them fully suitable
for the great demands of industrial applications that use serial
communication.
In addition, a 4-port LAN module, 8-port switch module, and 4-port
fiber LAN module are available for setting up industrial communication
applications with Ethernet-based devices. A universal PCI development
kit is also available for PCI-based devices for expanding industrial
applications at a reasonable cost.
All modules are designed to offer the greatest flexibility for setting up
applications and performing industrial tasks. In particular, users can
swap out modules quickly and easily.
Appearance
DA-SP08-I-TB
DA-SP08-DB/DA-SP08-I-DB
P5
P6
P1
P2
P8
P3
P4
RS-232/422/485
Serial Port x 8
RS-232/422/485 Serial Port x 8
DA-SP38-I-TB
RS-232/422/485
P7
DA-LN04-RJ
10/100 Mbps Ethernet Port
RS-422/485 Serial Port x 8
1
10/100 Mbps
Ethernet x 4
w w w. m o x a . c o m
info@moxa.com
Power Substation Computers
DA-UPCI-DK
DA-SW08-RJ
Universal PCI Expansion Slot
10/100 Mbps Switch Port x 8
DA-FX04-MM-ST-T
Fiber LAN Port x 4
DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications
Serial Interface
Serial Standards: 8 RS-232/422/485 ports, software selectable (DB9
male or terminal block connector)
ESD Protection: 15 KV for all signals
Isolation: 2 KV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB
only)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction
control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Physical Characteristics
Weight: 290 g
Dimensions: 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)
MTBF (mean time between failures): 1,753,143 hrs
DA-SP38-I-TB Hardware Specifications
Serial Interface
Serial Standards: 8 RS-422/485 ports, software selectable (DB9 male
or terminal block connector)
ESD Protection: 15 KV for all signals
Isolation: 2 KV digital isolation
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction
control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates;
see user’s manual for details)
Serial Signals
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Physical Characteristics
Weight: 245 g
Dimensions: 130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)
DA-LN04-RJ Hardware Specifications
Ethernet Interface
LAN: 4 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Physical Characteristics
Weight: 198 g
Dimensions: 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
2
w w w. m o x a . c o m
info@moxa.com
Power Substation Computers
DA-SW08-RJ Hardware Specifications
Ethernet Interface
Physical Characteristics
LAN: 8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports
(RJ45)
Magnetic Isolation Protection: 1.5 KV built-in
Weight: 200 g
Dimensions: 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
DA-UPCI-DK Hardware Specifications
Universal PCI Expansion Adatpor
Physical Characteristics
PCI Slots: 1
Interface Bus: 32-bit Universal PCI (3.3 V and 5 V)
Weight: 195 g
Dimensions: 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
MTBF (mean time between failures): 11,053,266 hrs
DA-FX04-MM-ST-T Hardware Specifications
Fiber Interface
Environmental Limits
Number of Ports: 4 (100BaseFX)
Fiber Mode: Multi-mode
Connector Type: ST
Optical Wavelength: 0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)
Min-TX Output: -20 dBm
Max-TX Output: -14 dBm
RX Sensitivity: -34 dBm
Operating Temperature: -40 to 70°C (-40 to 158°F)
Standards and Certifications
EMC: EMC Level 4, ESD Level 4, criteria A
Software Functions
IEEE 1588 or IP Teaming Selectable (Default =IP Teaming): Supports
4 modes
AFT: Adaptor Failover Teaming
SFT: Switch Fault Tolerance
ALB: Adaptor Failover and Load Balancing
Link Aggregation: supported
Physical Characteristics
Weight: 495 g
Dimensions: 132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)
Compatibility Chart for Peripheral Expansion Modules and Embedded Computers
All expansion modules can be used on any of Moxa’s embedded computers that come with the peripheral expansion slots, such as the
DA-682
DA-710
DA-683
DA-SP08-DB 8-port Serial Module (RS-232/422/485)
Module Models
P
P
P
DA-SP08-I-DB 8-port Serial Module (RS-232/422/485)
DA-SP08-I-TB 8-port Serial Module (RS-232/422/485)
DA-SP38-I-TB 8-port Serial Module (RS-422/485)
DA-LN04-RJ 4-port LAN Module (10/100 Mbps)
DA-SW08-RJ 8-port Switch Module (10/100 Mbps)
DA-UPCI-DK PCI Module
DA-FX04-MM-ST-T 4-port Fiber LAN Module (100 Mbps)
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Ordering Information
Available Models
Package Checklist
DA-SP08-I-DB: 8-port RS-232/422/485 serial module with DB9 connector and digital isolation
• 1 expansion module
DA-SP08-DB: 8-port RS-232/422/485 serial module with DB9 connector
• 8 terminal blocks (DA-SP08-I-TB,
DA-SP08-I-TB: 8-port RS-232/422/485 serial module with terminal block connector and digital
DA-SP38-I-TB)
isolation
• Product notes (printed, DA-SP38-I-TB)
DA-SP38-I-TB: 8-port RS-422/485 serial module with terminal block connector and digital isolation
DA-SW08-RJ: 8-port 10/100 Mbps unmanaged switch module
DA-LN04-RJ: 4-port 10/100 Mbps LAN module
DA-UPCI-DK: Universal PCI development kit
DA-FX04-MM-ST-T: 4-port (100BaseFX) fiber LAN module with multi-mode, ST connector, supports IP Teaming
Model Name
DA-SP08-I-DB
DA-SP08-DB
DA-SP08-I-TB
DA-SP38-I-TB
DA-SW08-RJ
DA-LN04-RJ
DA-UPCI-DK
DA-FX04-MM-ST-T
3
Serial Ports
RSRS-232/485
232/422/485
8
–
Isolation
2 KV Digital
P
Switch
LAN
10/100 Mbps
Fiber 100
10/100 Mbps
(RJ45)
Mbps (ST)
–
–
–
DB9
P
Connector Type
Terminal
RJ45
Block
–
–
PCI
Fiber
3.3/5 V
–
–
8
–
–
–
–
–
P
–
–
–
–
8
–
P
–
–
–
–
–
P
–
–
–
8
P
–
–
–
–
–
P
–
–
–
–
–
8
–
–
–
P
–
–
–
–
–
–
–
4
–
–
P
–
–
–
–
–
–
–
–
–
–
–
–
–
P
–
–
–
–
–
P
–
–
–
P
–
© Moxa Inc. All Rights Reserved. Updated Feb. 23, 2012. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.
Download PDF