Mr. Heater MH210KT Technical information

Mr. Heater MH210KT Technical information
YOUR ONE-STOP-SHOP SOURCE FOR:
SPRAYER EQUIPMENT
TURF SPRAYER EQUIPMENT
FOLIAGE SPRAYERS
LIQUID DE-ICE EQUIPMENT
TANKS
PUMPS
GAS ENGINES
FOAM MARKERS
PRESSURE WASHERS
PORTABLE HEATERS
ELECTRONIC SPRAY MONITORS
GPS GUIDANCE SYSTEMS
TOLL FREE 1-800-477-1051
LOCAL AREA
24 HOUR FAX LINE
WEB SITE
1-319-377-1050
1-319-377-2401
WWW.SPRAYLAND.COM
INDEX
A
H
S
ADJUSTABLE NOZZLE.................................... 59,74
AGITATORS........................................................... 29
APRONS............................................................... 80
HEAT EXCHANGER.......................................... 65
HIGH LIMIT SWITCH......................................... 71
HIGH PRESSURE HOSE ASSEMBLIES........... 74
HITCH RECEIVER CARRIERS.......................... 78
HOSE.........................................................33,34,74
HOSE CLAMPS................................................. 54
HOSE CUTTERS................................................ 33
HOSE REELS..................................................... 65
HOSE REEL SWIVELS.......................................75
HOT WATER WASHERS.........................62,63, 65
HOUR METERS................................................. 79
HYDROSTATIC TESTER................................... 64
SAFETY GLASSES............................................ 80
SANDBLASTER KIT........................................... 65
SEWER NOZZLES..............................................74
SHAFT COUPLERS............................................ 76
SOLENOID SWITCH...........................................79
SPACE HEATERS.............................................. 81
SPACE HEATER PARTS....................................82
SPINDLES......................................................... 78
SPOT SPRAYERS.............................................. 10
SPRAY GUNS...........................................57-59,73
SPRAY TIPS.........................................42-44,59,74
SPRAY TIP CHART............................................ 85
SPRAY TIP TESTER.......................................... 46
SPRAY TIP MONITOR........................................46
SPRAYERS......................................................3-13
SPRAYER MONITORS.............................13,50-51
SWIVELS........................................................41,75
B
BACKFLOW PREVENTER.....................................34
BACK PACK SPRAYERS.......................................11
BATTERY CLIPS................................................... 79
BOOMS................................................................ 14
BOOM CLAMPS.................................................39,41
BOOMLESS NOZZLES.......................................... 44
BOOM VALVES................................................. 13,55
BRASS FITTINGS.........................................35,37,39
C
C-FLANGE............................................................ 70
CABLE TIES.......................................................... 79
CALIBRATOR CONTAINERS ................................46
CAMLOCK COUPLERS......................................... 32
CARGO HAULERS..................................................78
CARTS.................................................................... 78
CHECK VALVES................................................36,39
CHEMICAL INJECTORS................................... 13,70
CIRCUIT BREAKERS............................................. 79
COIL CLEANER..................................................... 71
CORD SETS........................................................... 79
I
INDUCTORS...................................................... 12
INJECTORS................................................... 12,70
INJECTION SPRAYERS............................. ….4,12
INSULATED WANDS......................................... 73
L-M
LAWN & GARDEN SPRAYERS..........................11
LAWN GUNS.................................................... 58
LIGHTER ADAPTER PLUG................................ 79
LINE STRAINERS...........................................30,70
LIQUID DETERGENT......................................... 65
MANIFOLDS................................................. …..38
D
DE-ICE SPRAYER..................................................13
DISPOSABLE COVERALLS.................................. 80
DROPS................................................................. 41
DUAL WAND....................................................... 73
DUST MASKS....................................................... 80
DYE...................................................................... 15
N-O
NOZZLES........................................42-44,58,59,74
NOZZLE FITTINGS.................................. 39,40,41
NUTRA-SOL...................................................... 29
NYLON FITTINGS...........................34,35,36,38,39
OIL BURNER PARTS......................................... 71
E
FACE SHIELD....................................................... 80
FLANGES…............................................................54
FLEX WAND......................................................... 73
FLOAT VALVE...................................................... 29
FLOW METERS........................................... 50,51,52
FLOW SWITCH..................................................... 70
FOAM MARKERS.................................................. 15
FOAM SOLUTION................................................. 15
FOAM DYE........................................................... 15
FUEL FILTERS...................................................... 82
FUEL PUMP........................................................... 71
FUEL TANK........................................................... 71
FUSE HOLDERS.................................................... 79
FUSES.................................................................. 79
G
GARDEN HOSES................................................... 34
GARDEN HOSE SWIVELS.................................... 34
GAS ENGINES....................................................... 74
GAUGES............................................................... 45
GAUGE ISOLATORS............................................. 45
GEAR BOXES....................................................24,70
GLOVES................................................................ 80
GOGGLES............................................................. 80
GUIDANCE SYSTEMS......................................47-49
www.sprayland.com
TANKS.......................................................27-28,71
TANK FITTINGS................................................ 29
TANK LIDS........................................................ 29
TANK RINSING NOZZLE................................... 29
TANK SADDLES................................................ 29
TANK STRAINER BASKETS……………………..29
TECHNICAL INFORMATION.........................82-85
TEFLON TAPE................................................... 36
TELESCOPING WAND…………………………...73
THERMAL RELIEF VALVE................................. 70
THERMOSTAT....................................................71
THROTTLING VALVES...................................... 56
TIE DOWN STRAPS.......................................... 79
TOGGLE SWITCHES......................................... 79
TRAILER CONNECTOR..................................... 79
TRAILER JACK.................................................. 78
TRANSFORMERS..........................................71,82
TUBE FITTINGS................................................. 38
TURBO NOZZLE............................................... 74
TWIST COUPLERS............................................ 75
U-V
EDUCTORS………................................................. 12
ELECTRIC SPRAYER CONTROLS.........13,50-51,53
ELECTRIC MOTORS..............................................76
F
T
P-Q
PIPE FITTINGS...............................................36,37
PRESSURE RELIEF VALVES........................24,56
PRESSURE SWITCH......................................... 70
PRESSURE WASHERS.................................60-64
PTO COUPLERS................................................ 22
PTO PRESSURE WASHER............................... 64
PUMPS
CENTRIFUGAL...............................16-20,26
DIAPHRAGM...................................23-24,26
FUEL....................................................... 71
GAS DRIVEN CENTRIFUGAL..................17
INJECTOR............................................... 12
PISTON................................................... 67
PLUNGER.............................................66-69
ROLLER................................................21-22
TRANSFER.............................................. 25
12 VOLT.....................................................26
PUMP SPEED CONTROLLER........................... 26
QUICK COUPLERS........................................34,75
QUICK TEEJET FITTINGS............................ 40,41
UNLOADER VALVES......................................... 72
VALVES.....................................................31,34,55
W-X-Y-Z
WANDS......................................................58,59,73
WASH DOWN GUN............................................ 73
WHEELS,TIRES................................................. 78
WHEEL HUBS................................................... 78
WIND METER................................................... 46
DON'T GIVE UP!
R
RESPIRATORS...................................................80
RINSE TANK..................................................... 80
ROOT FEEDERS............................................... 58
ROTARY SWITCH.............................................. 71
ROTATING SURFACE CLEANER......................65
PAGE 2
IF YOU ARE LOOKING FOR AN ITEM NOT
IN THIS CATALOG, GIVE US A CALL AND
WE MIGHT BE ABLE TO GET IT FOR YOU!
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
TURF SPRAYERS
150 & 300 GALLON TRAILER SPRAYERS
STANDARD FEATURES:
» 150 OR 300 GALLON LOW-PROFILE POLYETHYLENE
TANK
» HEAVY WELDED STEEL FRAME-ENAMEL PAINTED
» WIDE TURF TIRES
» SIDEWINDER JACK
» RINSE TANK
» JET AGITATION
» TWIN BEAM BOOM WITH SPRING LOADED
BREAK-AWAY
» THREE SECTION ELECTRIC SPRAYER BOOM
CONTROL WITH PRESSURE ADJUSTING
» NO-DRIP QUICK TEEJET® NOZZLE BODIES
» CHOICE OF PTO DRIVEN OR GAS ENGINE DRIVEN
CENTRIFUGAL PUMP.
» 20 FT. HOSE AND SPRAY WAND
HEAVY-DUTY TWIN BEAM BOOM IS DESIGNED FOR
BETTER “WEAR AND TEAR” AND HAS LESS BOUNCE THAN
"PIPE" BOOMS. THE ENDS BREAK AWAY WHEN BUMPING
INTO OBJECTS THEN SPRING BACK INTO PLACE. FOLDS
EASILY FOR TRANSPORT.
YOUR CHOICE OF GAS ENGINE
DRIVEN OR PTO DRIVEN
CENTRIFUGAL PUMPS.
PART NO.
TS150P
TS150G
TS300P
TS300G
TB17Q
TB21Q
TB28Q
DESCRIPTION
150 GAL. TRAILER SPRAYER w/ PTO PUMP
150 GAL. TRAILER SPRAYER w/ GAS ENGINE
300 GAL. TRAILER SPRAYER w/ PTO PUMP
300 GAL. TRAILER SPRAYER w/ GAS ENGINE
CHOOSE BOOM:
17' BOOM-11 NOZZLES
21' BOOM-13 NOZZLES
28' BOOM-17 NOZZLES
FM06GCB
844E-KIT
HR100M
HR200S
OPTIONS:
6 GALLON FOAM MARKER-INSTALLED
TEEJET 844 SPRAY MONITOR-INSTALLED
MINI HOSE REEL WITH 100 FT. 3/8” HOSE & GUN
STANDARD HOSE REEL WITH 200 FT. 3/8” HOSE & GUN
www.sprayland.com
PAGE 3
WT
362
375
468
480
LIST
PRICE
$4530.00
5330.00
5185.00
5725.00
CATALOG
PRICE
$ 3600.00
4075.00
4225.00
4735.00
87
93
106
976.00
1035.00
1148.00
880.00
950.00
1035.00
49
17
43
78
785.00
2350.00
459.00
585.00
690.00
1850.00
390.00
505.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
INJECTION SPRAYER
535 GALLON COMMERCIAL CHEMICAL INJECTION SPRAYER
THIS SPRAYER IS DESIGNED FOR INJECTING CHEMICALS WHERE
PRECISION IS A NECESSITY. OPERATOR CAN INJECT UP TO 3 CHEMICALS
AT THE SAME TIME WHICH MAKES THIS SPRAYER A TIME SAVER! EACH
3½ GALLON INJECTION TANK HAS ITS OWN INJECTOR PUMP FOR
SEPARATE RATES (.5 TO 5%). ELIMINATES THE NEED TO KNOW HOW
MUCH CHEMICAL TO MIX IN THE TANK. JUST SET THE PRESSURE AND
MIX RATE. PERFECT FOR ROAD RIGHT OF WAY SPRAYING, COMMERCIAL
LAWN CARE, PARKS, AND PEST CONTROL SPRAYING. 100 PSI MAXIMUM
INJECTION PRESSURE. 5.5 HP HONDA MOTOR, HYPRO D-30 PUMP, 300 FT
OF HOSE ON ELECTRIC REWIND REEL, 12 GALLON FLUSH TANK, AND
TEEJET LAWN GUN. » FORK TRUCK RAILS FOR EASY LOADING AND
UNLOADING.
MODEL NO.
535LI
LIST
PRICE
$ 9398.00
CATALOG
PRICE
$ 7850.00
300 GALLON COMMERCIAL CHEMICAL INJECTION SPRAYER
THE 300 GALLON LOW-PROFILE INJECTION SPRAYER CAN INJECT ONE OR
TWO CHEMICALS AT THE SAME TIME. IDEAL FOR COMMERCIAL LAWN
CARE, NURSERIES, GOLF COURSES, PARKS, AND PEST CONTROL
SPRAYING. 100 PSI MAXIMUM INJECTION PRESSURE. 5.5 HP HONDA
MOTOR, HYPRO D-30 PUMP, 300 FT OF HOSE ON ELECTRIC REWIND REEL,
TWO 3½ GALLON INJECTION TANKS, 12 GALLON FLUSH TANK, AND
TEEJET LAWN GUN. » FORK TRUCK RAILS FOR EASY LOADING AND
UNLOADING FITS INTO A FULL SIZE PICK UP. 90”L x 48”W.
SHIP WT. 795 LBS.
MODEL NO.
300LI
LIST
PRICE
$ 7630.00
CATALOG
PRICE
$ 6195.00
100 GALLON CHEMICAL INJECTION SPRAYER
IDEAL FOR SMALLER LAWN CARE SERVICES, NURSERIES, AND PEST
CONTROL. 5 LITER REMOVABLE INJECTION TANK, 2.3 GPM 12 VOLT
DIAPHRAGM PUMP, 100 FT HOSE ON MANUAL REEL.
36”W x 37”H x 28”H. SHIP WT. 260 LBS
MODEL NO.
TS100SI
LIST
PRICE
$ 3615.00
CATALOG
PRICE
$ 2825.00
60 GALLON CHEMICAL INJECTION SPRAYER
SAME FEATURES AS THE 100 GALLON SPRAYER WITH A 60 GALLON
TANK. 30”W X 30”H X 28”H. SHIP WT. 240 LBS
MODEL NO.
TS65SI
www.sprayland.com
PAGE 4
LIST
PRICE
$ 3322.00
CATALOG
PRICE
$ 2625.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SKID SPRAYERS
450 GALLON COMMERCIAL LAWN & TREE SPRAYER
THIS SKID SPRAYER OFFERS GREAT VERSATILITY FOR
COMMERCIAL SPRAYING, INCLUDING LAWN CARE, GOLF COURSES,
AND PARKS AND REC. AREAS. DESIGNED FOR 1 TON OR BIGGER
PICK UP TRUCK OR A TRAILER.
FEATURES:
» 450 GALLON LOW PROFILE POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» D-30 DIAPHRAGM PUMP-550 PSI, 9.5 GPM MAX RATINGS.
» PUMP CAN BE RUN DRY WITHOUT DAMAGE.
» 300 FT. NYLON REINFORCED PVC HOSE.
» HANNAY 12 VOLT ELECTRIC HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» 3 ½ GALLON FRESH WATER WASH TANK
» FORK TRUCK RAILS FOR EASY LOADING AND UNLOADING
» 90”L x 48”W. SHIP WT. 985 LBS.
LIST
MODEL NO.
PRICE
450LTE
$ 6260.00
38500-A JD-9 SPRAY GUN INSTEAD OF TEEJET GUN
305 GALLON COMMERCIAL LAWN & TREE SPRAYER
CATALOG
PRICE
$ 4850.00
96.00
THIS PICK UP SKID UNIT IS ONE OF OUR MOST POPULAR
SPRAYERS FOR COMMERCIAL LAWN CARE. ALSO POPULAR FOR
NURSERIES, GOLF COURSES, PARKS, AND FENCE ROW SPRAYING.
EASILY FITS INTO A FULL SIZE 3/4 TON OR LARGER PICK UP.
FEATURES:
» 305 GALLON LOW PROFILE POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» D-30 DIAPHRAGM PUMP-550 PSI, 9.5 GPM MAX RATINGS.
» PUMP CAN BE RUN DRY WITHOUT DAMAGE.
» 300 FT. NYLON REINFORCED PVC HOSE.
» HANNAY 12 VOLT ELECTRIC HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» 3 ½ GALLON FRESH WATER WASH TANK
» FORK TRUCK RAILS FOR EASY LOADING AND UNLOADING
» 90”L x 48”W. SHIP WT. 850 LBS.
LIST
MODEL NO.
PRICE
300LTE
$ 5800.00
38500-A JD-9 SPRAY GUN INSTEAD OF TEEJET GUN
CATALOG
PRICE
$ 4540.00
96.00
200 GALLON LAWN & TREE SPRAYER
THE 200LTS OFFERS THE SAME FEATURES AS THE 300LTE IN A MORE COMPACT DESIGN.
FOR 1/2 TON OR LARGER PICKUP.
FEATURES:
» 200 GALLON PCO POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» D-30 DIAPHRAGM PUMP-550 PSI, 9.5 GPM MAX RATINGS.
» PUMP CAN BE RUN DRY WITHOUT DAMAGE.
» NYLON REINFORCED PVC HOSE.
» HEAVY-DUTY HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» 36”W x 72”L.
» SHIP WT. 700 LBS (200LTS) 785 LBS (200LTE)
» ALSO AVAILABLE IN SPACE SAVING DESIGN FOR SAME PRICE (SEE NEXT PAGE FOR
PICTURE OF DESIGN)
MODEL NO.
200LTS
200LTE
38500-A
DESCRIPTION
200 GALLON SKID w/200 FT HOSE AND MANUAL REEL
200 GALLON SKID w/300 FT HOSE AND ELECTRIC REEL
JD-9 SPRAY GUN INSTEAD OF TEEJET GUN
www.sprayland.com
LIST
PRICE
$ 4665.00
5093.00
ADD:
PAGE 5
CATALOG
PRICE
$ 3625.00
4270.00
96.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SKID SPRAYERS
150 GALLON SKID SPRAYER
THIS SPRAYER IS COMPACT DESIGN WHERE SPACE IS LIMITED. 150 GALLON PCO TANK IS A NICE
SIZE FOR SMALLER TURF APPLICATIONS OR FOR PEST CONTROL USE.
FEATURES:
» 150 GALLON PCO POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» D-30 DIAPHRAGM PUMP-550 PSI, 9.5 GPM MAX RATINGS.
» PUMP CAN BE RUN DRY WITHOUT DAMAGE.
» NYLON REINFORCED PVC HOSE.
» HEAVY-DUTY HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» 36”W x 72”L.
» SHIP WT. 650 LBS (150LTS) 735 LBS (150LTE)
MODEL NO.
150LTS
150LTE
38500-A
100 GALLON SKID SPRAYER
DESCRIPTION
150 GALLON SKID w/200 FT HOSE AND MANUAL REEL
150 GALLON SKID w/300 FT HOSE AND ELECTRIC REEL
JD-9 SPRAY GUN INSTEAD OF TEEJET GUN
LIST
PRICE
$ 4065.00
4742.00
ADD:
CATALOG
PRICE
$ 3345.00
3795.00
96.00
SPACE SAVING DESIGN TO FIT INTO SMALLER SPACES LIKE A COMPACT PICKUP. WORKS GREAT FOR
SMALLER COMMERCIAL JOBS, SPOT SPRAYING, PEST CONTROL, FENSE ROW SPRAYING, AND MANY
OTHER USES.
FEATURES:
» 100 GALLON PCO POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» D-30 DIAPHRAGM PUMP-550 PSI, 9.5 GPM MAX RATINGS.
» NYLON REINFORCED PVC HOSE.
» HEAVY-DUTY HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» 34”W x 72”L.
» SHIP WT. 450 LBS (100LTS) 505 LBS (100LTE)
MODEL NO.
100LTS
100LTE
38500-A
200 GALLON VAN SKID SPRAYER
DESCRIPTION
100 GALLON SKID w/200 FT HOSE AND MANUAL REEL
100 GALLON SKID w/300 FT HOSE AND ELECTRIC REEL
JD-9 SPRAY GUN INSTEAD OF TEEJET GUN
CATALOG
PRICE
$ 3030.00
3450.00
96.00
LIST
PRICE
$ 3615.00
4171.00
ADD:
DESIGNED TO INSTALL INTO UTILITY VANS. WORKS GREAT FOR SMALLER COMMERCIAL JOBS, LAWN
CARE, PEST CONTROL, AND MANY OTHER USES.
FEATURES:
» 200 GALLON PCO POLYETHYLENE TANK
» UDOR 12 VOLT DIAPHRAGM PUMP-90 PSI, 3.5 GPM MAX RATINGS.
» 300 FT. NYLON REINFORCED PVC HOSE.
» HEAVY-DUTY HOSE REEL
» TEEJET® LAWN GUN (JD-9 GUN OPTIONAL)
» BATTERY BOX & HEAVY DUTY BATTERY INCLUDED
» 34”W x 65”L.
» SHIP WT. 295 LBS
MODEL NO.
200LTV
DESCRIPTION
200 GALLON VAN SKID
LIST
PRICE
$ 4493.00
CATALOG
PRICE
$ 3375.00
100 GALLON RESIDENTIAL SKID SPRAYER
WORKS GREAT ON ACREAGES OR SMALL FARMS. USED FOR RESIDENTIAL LAWN, GARDEN,
AND TREE SPRAYING.
FEATURES:
» 100 GALLON PCO POLYETHYLENE TANK
» 5.5 HP HONDA ENGINE WITH 6:1 GEAR REDUCTION
» HYPRO 5206C PISTON PUMP-200 PSI, 6 GPM MAX RATINGS.
» 20 FT HOSE AND TRIGGER SPRAY GUN.
» 34”W x 72”L.
» SHIP WT. 270 LBS
MODEL NO.
100RS
www.sprayland.com
PAGE 6
DESCRIPTION
100 GALLON SKID
LIST
PRICE
$ 2645.00
CATALOG
PRICE
$ 1990.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPECIALITY SPRAYERS
60 GALLON UTILITY TRUCK SPRAYER
60 GALLON SKID SPRAYER FITS IN MOST UTILITY TRUCKS. IDEAL FOR TURF SPRAYING AND
LIQUID DE-ICE APPLICATIONS. RUGGED STEEL FRAME, POLY TANK, 5.5 HP HONDA MOTOR, 8ROLLER PUMP. 12 FT. BOOM HAS TEEJET QUICKJET FITTINGS, BREAK-AWAY FEATURE AND
FOLDS BACK FOR STORAGE. ALSO INCLUDES 75 FT OF HEAVY DUTY HOSE ON A MANUAL
REEL. 12 VOLT SINGLE BOOM SHUT-OFF CONTROL. 32” W X 42” L. SHIP WT. 295 LBS.
OPTIONAL 1 GALLON FOAM MARKER (FM01GC) AVAILABLE.
MODEL NO.
TS60AT
LIST
PRICE
$ 2709.00
ADD OPTION:
FM01GC-INSTALLED
535.00
38500-B JD-9 SPRAY GUN INSTEAD OF SL1500 GUN
CATALOG
PRICE
$ 2250.00
ADD
ADD:
440.00
109.00
100 GALLON UTILITY TRUCK SPRAYER
SAME FEATURES AS THE 65 GALLON SPRAYER ABOVE BUT WITH A 100 GALLON PCO
TANK AND 100 FT SPRAY HOSE FOR LARGER SPRAY APPLICATIONS. 37” W X 45”L. SHIP
WT. 350 LBS.OPTIONAL 1 GALLON FOAM MARKER (FM01GC) AVAILABLE.
CATALOG
PRICE
$ 2445.00
LIST
PRICE
$ 2775.00
MODEL NO.
TS100AT
ADD OPTION:
FM01GC-INSTALLED
520.00
38500-B JD-9 SPRAY GUN INSTEAD OF SL1500 GUN
ADD
ADD:
440.00
109.00
110 GALLON LOW PROFILE UTILITY TRUCK SPRAYER
SAME FEATURES AS THE 100 GALLON SPRAYER ABOVE BUT WITH A 110 GALLON LOW PROFILE TANK.
48” W X 56”L. SHIP WT. 375 LBS.OPTIONAL 1 GALLON FOAM MARKER (FM01GC) AVAILABLE.
MODEL NO.
TS110AT
LIST
PRICE
$ 2915.00
ADD OPTION:
FM01GC-INSTALLED
535.00
38500-B JD-9 SPRAY GUN INSTEAD OF SL1500 GUN
CATALOG
PRICE
$ 2470.00
ADD
ADD:
440.00
109.00
65 GALLON 3-POINT VINEYARD SPRAYER
DESIGNED TO SPRAY THE SIDE AND TOP OF THE VINEYARD ROW. WILL WORK ON SINGLE WIRE OR T-WIRE
CONFIGURATIONS. PTO DRIVEN 6 ROLLER PUMP, ADJUSTABLE BOOM HEIGHT AND ADJUSTABLE SPRAY
ANGLE SWIVELS TO PUT THE SPRAY WHERE YOU NEED IT. LOW COST ALTERNATIVE TO MIST BLOWERS
MODEL NO.
3PT65V
A1820
www.sprayland.com
VINEYARD SPRAYER
SPRAY GUN KIT
PAGE 7
LIST
PRICE
$ 960.00
99.97
CATALOG
PRICE
$ 720.00
70.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
3-POINT SPRAYERS
COMPLETE 60 GALLON 3-POINT SPRAYER
» CATEGORY I 3-POINT HOOK UP
» 60 GALLON POLYETHYLENE TANK
» 6 ROLLER PUMP WITH PTO COUPLER
» 12 FT. BOOM WITH BREAK-AWAY
» MANUAL BOOM SHUT-OFF AND PRESSURE CONTROL
» OPTIONAL SPRAY GUN KIT WITH 20 FT. OF HOSE
» SHIP WT. 145 LBS
MODEL NO.
3PT60
A1820
DESCRIPTION
3-POINT SPRAYER
SPRAY GUN KIT
LIST
PRICE
$ 924.00
99.97
CATALOG
PRICE
$ 695.00
70.00
100 GALLON 3-POINT SPRAYER
FEATURES:
» CATEGORY I & II 3-POINT FRAME
» 100 GALLON POLYETHYLENE TANK
» HEAVY DUTY 3-POINT CARRIER
» ORDER PLUMBING AND BOOM SEPARATELY (SEE BELOW)
» SHIP WT. 125 LBS
LIST
CATALOG
MODEL NO.
DESCRIPTION
PRICE
PRICE
3PT100
3-POINT SPRAYER
$ 1155.00
$ 860.00
150 GALLON 3-POINT SPRAYER
FEATURES:
» CATEGORY I & II 3-POINT FRAME
» 150 GALLON POLYETHYLENE TANK
» HEAVY DUTY 3-POINT CARRIER
» ORDER PLUMBING AND BOOM SEPARATELY (SEE BELOW)
» SHIP WT. 140 LBS
MODEL NO.
3PT150
DESCRIPTION
3-POINT SPRAYER
LIST
PRICE
$ 1479.00
CATALOG
PRICE
$ 1105.00
200 GALLON 3-POINT SPRAYER
FEATURES:
» CATEGORY I & II 3-POINT FRAME
» 200 GALLON POLYETHYLENE TANK
» HEAVY DUTY 3-POINT CARRIER
» ORDER PLUMBING AND BOOM SEPARATELY (SEE BELOW)
» SHIP WT. 285 LBS
MODEL NO.
3PT200
DESCRIPTION
3-POINT SPRAYER
LIST
PRICE
$ 1621.00
CATALOG
PRICE
$1250.00
PLUMBING KITS FOR 3-POINT SPRAYERS
SEE PAGE 14 FOR BOOMS
MODEL NO.
KT8R
KT940C
KT6B
RC-1B-3
A1820
A14320
www.sprayland.com
DESCRIPTION
8 ROLLER PUMP KIT
CENTRIFUGAL PUMP KIT (PTO BELT DRIVEN)
3 SECTION MANUAL BOOM CONTROL KIT
3 SECTION ELECTRIC BOOM CONTROL
SPRAY GUN KIT (#18 GUNJET & 20 FT HOSE)
SPRAY GUN KIT (#143 GUNJET & 20 FT HOSE)
PAGE 8
LIST
PRICE
$ 510.00
1153.00
183.00
720.99
99.97
134.00
CATALOG
PRICE
$ 417.00
930.00
138.00
505.00
70.00
96.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ALL PURPOSE SPRAYERS
60 GALLON ATV SPRAYER
FEATURES:
» 60 GALLON POLYETHYLENE TANK
» HEAVY DUTY TUBE STEEL POWDER COATED FRAME
» 22x11x8 FLOATATION ATV TIRES
» 10 FT. BOOM WITH BREAK-AWAY
» 8 ROLLER PUMP DIRECT DRIVEN TO HONDA 6:1 ENGINE
» JACK STAND
» 20 FT. EPDM HOSE AND HAND GUN
» MANUAL BOOM SHUT-OFF AND PRESSURE CONTROL
» SHIP WT. 350 LBS.
» OPTIONAL 1 GALLON FOAM MARKER AVAILABLE
MODEL NO.
T65ATV
ADD OPTION:
FM01GC-INSTALLED
LIST
PRICE
$ 2742.00
CATALOG
PRICE
$ 2190.00
535.00
440.00
60 GALLON SPRAYER-GAS ENGINE DRIVEN
THIS 65 GALLON SPRAYER HAS COUNTLESS USES! COMPACT, EASY TO MOVE AROUND OR
PERMANENTLY MOUNT IN PLACE, THIS UNIT CAN BE USED FOR SPRAYING LIVESTOCK,
FENCE ROWS, FRUIT TREES, LAWN CARE, PEST CONTROL, ETC.
FEATURES:
» 5.5 HP HONDA ENGINE WITH OIL ALERT™ PROTECTION
» 8 ROLLER HYPRO PUMP-150 PSI, 10 GPM MAX. RATINGS
» 20 FT. EPDM HOSE WITH TRIGGER SPRAY GUN
» POWDER COATED STEEL FRAME
» 48”L x 24”W.
MODEL NO.
TS65GE
DESCRIPTION
60 GALLON SPRAYER
WT.
188 LBS
LIST
PRICE
$1805.00
CATALOG
PRICE
$ 1370.00
TRAILER AND BOOM KITS FOR 60 GALLON GAS SKID SPRAYERS
KITS TO ADD BOOMS AND CONVERT THE 60 GALLON GAS SKID SPRAYERS
TO A TRAILER SPRAYER
MODEL NO.
DESCRIPTION
515TK
TRAILER KIT (w/TURF TIRES)
516BK
10 FT BOOM KIT (INCLUDES TIPS & PLUMBING)
WT.
36 LBS
41 LBS
LIST
PRICE
$ 357.00
298.00
CATALOG
PRICE
$255.00
245.00
60 GALLON SPRAYER WITH 12 VOLT PUMP
THE TS6512 60 GALLON SPRAYER IS DESIGNED FOR RESIDENTIAL AND COMMERCIAL USE. THE 12
VOLT PUMP HAS A LOW CURRENT DRAW (ONLY 13 AMPS) AND INCLUDES BATTERY CABLES AND
TOGGLE SWITCH. THIS SPRAYER COMES STANDARD WITH 20 FT. OF EPDM HOSE WITH TRIGGER
SPRAY GUN AND ADJUSTABLE SPRAY TIP. 60 PSI, 4.9 GPM MAX. RATINGS.
MODEL NO.
DESCRIPTION
TS6012
60 GALLON SPRAYER
K60ATX
10 FT BOOM MOUNTING KIT
www.sprayland.com
PAGE 9
WT.
84 LBS
LBS
LIST
PRICE
$ 603.00
317.00
CATALOG
PRICE
$ 479.00
260.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPOT AND ATV SPRAYERS
12 VOLT SPOT SPRAYERS
FEATURES:
» POLYETHYLENE TANK WITH MOLDED IN DRAIN
» HEAVY DUTY 12 VOLT DIAPHRAGM PUMPS
» 20 FT. EPDM HOSE AND TRIGGER WAND w/ ADJUSTABLE SPRAY TIP
» 12 FT. BATTERY CABLE AND SWITCH
AP
MODEL NO.
14-AP
25-AP
14-HP*
25-HP*
MAX
PSI
50
50
60
60
SIZE
15 GALLON
25 GALLON
15 GALLON
25 GALLON
MAX
GPM
2.2
2.2
3.7
3.7
WT.
18
21
25
30
LIST
PRICE
$ 194.00
207.00
302.00
320.00
* HP SERIES HAVE PRESSURE REGULATORS
CATALOG
PRICE
$ 155.00
165.00
$ 240.00
260.00
HP
ATV MOUNTING KITS FOR SPOT SPRAYERS
MOUNT YOUR SPOT SPRAYER TO YOUR ATV. KIT INCLUDES MOUNTING
BRACKETS, 40" BOOM THAT WILL SPRAY 80" BROADCAST, AND
NECESSARY PLUMBING TO FIT OUR 14 AND 25 GALLON SPOT SPRAYERS.
(SEE TOP OF THIS PAGE FOR SPOT SPRAYERS)
SHIP WT. 12 LBS.
MODEL NO.
K14ATV
LIST
PRICE
$ 115.00
CATALOG
PRICE
$ 92.00
ATV MOUNTING KITS FOR "HP" SERIES SPOT SPRAYERS
SIMILAR TO ATV KIT ABOVE BUT WITH 10 FOOT BREAK-AWAY BOOM TO FIT OUR
14 AND 25 GALLON "HP" SERIES SPOT SPRAYERS. SHIP WT. 36 LBS.
MODEL NO.
K14ATX
LIST
PRICE
$ 277.00
CATALOG
PRICE
$ 220.00
ATV SPRAYER WITH BOOMLESS NOZZLES
25 GALLON TANK, 4.9 GPM 12 VOLT PUMP, NOZZLES SPRAY UP TO 30 FOOT
SWATH. GREAT FOR LARGE LAWN AREAS, WATER WAYS, AND PASTURES. SHIP
WT. 36 LBS.
MODEL NO.
25-HB
LIST
PRICE
$ 521.00
CATALOG
PRICE
$ 410.00
PAGE 10
www.sprayland.com
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
LAWN & GARDEN SPRAYERS
30 GALLON TRAILER SPRAYER
FOR RESIDENTIAL USE. GREAT FOR SPRAYING LARGE YARDS, GARDENS, AND ORCHARDS.
OPERATES FROM YOUR 12 VOLT LAWN TRACTOR BATTERY.
FEATURES:
» POWDER COATED STEEL FRAME
» 20 FT. HOSE AND TRIGGER GUN
» UV PROTECTED POLYETHYLENE
WITH ADJUSTABLE NOZZLE
TANK W/SUMP
» 12 FT. BATTERY CABLE AND
SWITCH
» 12 DIAPHRAGM PUMP
» 45 PSI, 2 GPM MAX. RATINGS
MODEL NO.
25-LS
WT.
62
CATALOG
$ 320.00
LIST
$ 418.00
6 GALLON PORTABLE SPRAYER
FOR SPRAYING SMALLER YARDS, GARDENS, DE-ICING SIDEWALKS, AND MANY OTHER USES.
INCLUDES HEAVY DUTY DEEP CYCLE BATTERY WHICH MAKES THIS SPRAYER SELF-CONTAINED!
SPRAYS EITHER BROADCAST OR WITH THE SPRAY GUN.
FEATURES:
» POWDER COATED STEEL FRAME
» UV PROTECTED 6 GALLON TANK
» 12 DIAPHRAGM PUMP
» 12 VOLT DEEP CELL BATTERY
» STEEL HUB PNEUMATIC WHEELS
» BOOM NOZZLE SPRAYS 40" BROADCAST
» 10 FT. HOSE AND TRIGGER GUN WITH ADJUSTABLE NOZZLE
» 45 PSI, 2 GPM MAX. RATINGS
* NOTE: BECAUSE OF HAZ-MAT REGULATIONS, THE BATTERY CAN NOT BE SHIPPED WITH THIS SPRAYER. DEDUCT $39.00 FROM CATALOG
PRICE IF BEING SHIPPED OUT
MODEL NO.
06-LS
WT.
65
LIST
$ 372.00
CATALOG
$ 299.00
BACK PACK SPRAYER
ELECTRIC BACK PACK
SPRAYER
A VERY HANDY SPRAYER TO HAVE!
SIMPLY PUMP HANDLE TO BUILD
PRESSURE IN TANK THEN SPRAY. 4
GALLON TANK, TRIGGER WAND, AND
ADJUSTABLE SPRAY TIP.
MODEL NO.
BPS-405
WT.
12
LIST
$ 113.00
4 GALLON RECHARGABLE ELECTRIC
BACK PACK SPRAYER HAS BUILT IN
BATTERY, 4 SPEED SETTINGS FOR
DIFFERENT PRESSURES AND
ADJUSTABLE SPRAY TIP. INCLUDES
CHARGER! 1 GPM, 40 PSI MAX. RATINGS.
CATALOG
$ 89.00
MODEL NO.
SRS-600
WT.
16
LIST
$ 513.00
CATALOG
$ 255.00
1 QUART HAND SPRAYER
HANDY COMPRESSION SPRAYER USED FOR MANY APPLICATIONS. PUMP THE HANDLE TO BUILD PRESSURE AND SQUEEZE
THE TRIGGER TO SPRAY. ADJUSTABLE NOZZLE. IT'S THAT SIMPLE! WHILE SUPPIES LAST.
MODEL NO.
AP-2
WT.
1
LIST
$ 41.00
PAGE 11
www.sprayland.com
CATALOG
$ 25.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
INJECTION & INDUCTION SYSTEMS
COMMERCIAL INJECTION SPRAYER
THIS SPRAYER ELIMINATES THE NEED TO MIX CHEMICALS OR TRANSPORT TANKS TO THE JOB SITE. USES THE
CUSTOMER’S WATER SOURCE FOR THE SUPPLY. CHEMICAL CONCENTRATE IS INJECTED INTO THE SPRAY HOSE
AT THE RATE YOU PRESET IT TO. LOW MAINTENANCE, LOW COST, AND COMPACT SIZE MAKES THIS SPRAYER
IDEAL KEEPING OVERHEAD DOWN FOR LAWN AND PEST CONTROL BUSINESSES. INCLUDES 100 FT. SUPPLY
HOSE WITH GARDEN HOSE CONNECTOR AND BACKFLOW PREVENTOR. 300 FT. SPRAY HOSE WITH SPRAY GUN.
FLOW REGULATOR INSURES ACCURATE DISPENSING OF CHEMICALS THROUGH INJECTION PUMP AND A 12 VOLT
PUMP IS PLUMBED INTO THE SYSTEM FOR USE IN AREAS WITH LOW WATER PRESSURE.
PART NO
300PCI
DESCRIPTION
INJECTION SPRAYER
WT
225
LIST
PRICE
$ 3996.00
CATALOG
PRICE
$ 2995.00
INJECTOR PUMP
THE DOSAMATIC MINIDOS PUMP IS A NON-ELECTRIC, SELF PRIMING, WATER DRIVEN LIQUID INJECTOR DESIGNED TO
PROPORTIONALLY INJECT COMPLETELY DISSOLVED CHEMICALS. INJECTION RATIOS CAN BE EASILY CHANGED BY TURNING
THE RATIO ADJUSTING COLLAR TO THE DESIRED RATE. IT IS VERY ACCURATE AND WILL AUTOMATICALLY COMPENSATE FOR
ANY CHANGES IN INLET PRESSURE. THIS PUMP HAS COUNTLESS USES INCLUDING PEST CONTROL, TURF MANAGEMENT,
LIVESTOCK NUTRIENT INJECTING, GREENHOUSE FERTILIZING, AND CAR WASH APPLICATIONS JUST TO NAME A FEW. WILL
INJECT AT 0.5-5% MIX RATIO, 0.03-12 GPM INLET FLOW, 6-100 PSI INLET PRESSURE, AND TEMPERATURE TO 100ºF.
PART NO
112604
DESCRIPTION
INJECTION PUMP
WT
5
LIST
PRICE
$ 897.00
CATALOG
PRICE
$ 745.00
CHEMICAL INDUCTORS
FOR SAFER HANDLING OF CHEMICALS WHEN TRANSFERRING FROM BULK
STORAGE TO THE SPRAYING EQUIPMENT. COMPLETE UNIT INCLUDES: CONE
TANK, STAND , VALVES AND PLUMBING FOR 2" NPT (1 ½" AVAILABLE UPON
REQUEST). ORDER HOSE AND CAMLOCK COUPLERS SEPARATELY.
SPRAYER
PART NO
DESCRIPTION
CI-15S FREE STANDING INDUCTOR-15 GALLON
CI-30S FREE STANDING INDUCTOR-30 GALLON
CI-60S FREE STANDING INDUCTOR-60 GALLON
WT
28
34
34
LIST
PRICE
$ 279.00
325.00
384.00
CATALOG
PRICE
$ 220.00
255.00
305.00
STORAGE
TANK
CHEM
INDUCTOR
TRANSFER
PUMP
CHEMICAL EDUCTOR
Clean load™
FOR MIXING LIQUID AND DRY CHEMICALS QUICKLY TO THE SPRAYING
EQUIPMENT. 5.5 GALLON HOPPER, STAINLESS VENTURI, AND TANK AND BOTTLE
RINSING NOZZLES ARE STANDARD. OPTIONAL SUCTION LANCE FOR EDUCTION
BULK LIQUID AND DRY CHEMICALS FROM LARGER CONTAINERS.
PART NO
3375P-05T5
3430-0594
3430-0596
DESCRIPTION
CLEANLOAD EDUCTOR
SUCTION LANCE
BASE KIT
www.sprayland.com
WT
28
2
3
LIST
PRICE
$ 1385.00
192.00
90.00
CATALOG
PRICE
$ 830.00
144.00
67.50
PAGE 12
SPRAYER
STORAGE
TANK
Clean load™
TRANSFER
PUMP
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
LIQUID DE-ICE SPRAYERS
300 GALLON PICKUP DEICE SPRAYER
LOW-PROFILE SKID SPRAYER DESIGNED FOR SPRAYING LIQUID DE-ICING
CHEMICALS ON PARKING LOTS, SIDEWALKS, STREETS, AND MUCH MORE.
DESIGNED TO FIT IN A FULL SIZED STANDARD PICKUP (¾ TON OR LARGER
RECOMMENDED). PUMP BODY AND IMPELLER IS MADE OF POLYESTER FOR
EXCELLENT CORROSION RESISTANCE. THIS SPRAYER CAN ALSO DOUBLE AS
A TURF SPRAYER IN THE SPRING TO MAXIMIZE ITS USES!
FEATURES:
» 300 GALLON LOW PROFILE TANK
» 5.5 HP HONDA MOTOR WITH OIL ALERT™ PROTECTION
» PACER SELF-PRIMING PUMP
» QUICK FILL/DRAIN FEATURE FOR EASY TRANSFER OF CHEMICALS
» 10 FT. SPRAY BOOM WITH SAFETY BREAK AWAY AND TWO SETS OF
NOZZLES (POINT SPRAY AND BROADCAST)
» SPRAY GUN WITH 75 FT. HOSE AND REEL FOR SPOT SPRAYING
SMALLER AND HARDER TO REACH AREAS.
» 48”W X 90”L. SHIP WT. 650 LBS.
PART NO.
S300DI
DESCRIPTION
300 GALLON DE-ICE SPRAYER
LIST
PRICE
$5098.00
CATALOG
PRICE
$ 4050.00
DE-ICE SPRAY CONTROL MONITOR
DESIGNED SPECIFICALLY FOR ROADWAY APPLICATIONS SUCH AS DUST CONTROL AND
LIQUID DE-ICING. LARGE BACKLIT DISPLAY SHOWS ALL INFORMATION AT A GLANCE. (SPEED,
APPLICATION RATE, PRESSURE, AREA COVERED, & VOLUME APPLIED).WEATHER RESISTANT
HOUSING, SEALED SWITCHES AND SINGLE CABLE CONNECTION ARE SOME OF THE FEATURES
OF THIS MONITOR. COMPLETE SYSTEM INCLUDES CONSOLE, CABLES, BOOM VALVES,
PROXIMITY SPEED SENSOR, FLOW METER, AND REGULATING VALVE. CORE KIT INCLUDES
CONSOLE AND CABLES.
844-RA SYSTEMS AND COMPONENTS
PART NO.
844-RA-KIT
90-50136
16-40004
90-50230
35-02099
443BEC-S
PROXIMITY SPEED SENSOR
DESCRIPTION
844-RA COMPLETE CONTROL SYSTEM*
844-RA CONTROL CORE KIT
PROXIMITY SENSOR
801 FLOW METER
1” NPT REGULATING VALVE
3 VALVE MANIFOLD-STAINLESS BALL
REGULATING VALVE
RAPID CHECK FLOW METER
WT
34
17
1
1
3
16
LIST
PRICE
$ 5245.47
3027.23
94.51
458.15
231.24
1434.34
CATALOG
PRICE
$ 3725.00
2270.00
75.00
365.00
185.00
860.00
3-SECTION MANIFOLDED BOOM VALVES
60 GALLON UTILITY TRUCK DE-ICE SPRAYER
60 GALLON SPRAYER DESIGNED FOR LIQUID DE-ICE APPLICATIONS AND
FITS IN MOST UTILITY TRUCKS. RUGGED POWDER COATED STEEL FRAME,
POLY TANK, 5.5 HP HONDA 6:1 ENGINE, AND NI-RESISIT (NICKLE ALLOY)
CORROSION RESISTANT ROLLER PUMP. 12 FT. BOOM HAS TEEJET
QUICKJET FITTINGS, 2 SETS OF NOZZLES (BROADCAST STYLE AND
STREAM STYLE), BREAK-AWAY FEATURE AND FOLDS BACK FOR STORAGE.
75 FT OF HEAVY DUTY HOSE ON A MANUAL REEL WITH SPRAY GUN . 12
VOLT SINGLE BOOM SHUT-OFF CONTROL. 32” W X 42” L. SHIP WT. 325 LBS.
MODEL NO.
TS65DI
www.sprayland.com
LIST
PRICE
$ 3549.00
CATALOG
PRICE
$ 2705.00
PAGE 13
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
BOOMS
ECONOMY BOOMS FOR SMALL SPRAYERS
DESIGNED FOR SMALL SPRAY APPLICATIONS. USED ON TURF SPRAYERS, NURSERY SPRAYERS, SMALL CAT.
I THREE-POINT SPRAYERS, DEICE SPRAYING, ETC. BREAK-AWAY DESIGN TO PROTECT FROM DAMAGE AND
POWDER COATED FOR DURABILITY. DOES NOT INCLUDE MOUNTING BRACKETS. PLUMBING PACKAGE
INCLUDES FAN TIPS AND SCREENS.
PART NO.
EB10N
EB10P
EB10Q
LENGTH
10 FT.
10 FT.
10 FT.
TYPE
NO PLUMBING
STANDARD PLUMBING
QUICK TEEJET PLUMBING
WT
25 LBS
28 LBS
28 LBS
LIST
PRICE
$ 190.00
258.00
327.00
CATALOG
PRICE
$ 155.00
200.00
285.00
EB12N
EB12P
EB12Q
12 FT.
12 FT.
12 FT.
NO PLUMBING
STANDARD PLUMBING
QUICK TEEJET PLUMBING
27 LBS
30 LBS
28 LBS
232.00
311.00
344.00
170.00
237.00
293.00
ECONOMY BOOMS FOR SMALL TO MEDIUM SPRAYERS
FOR SMALL TO MEDIUM SIZED SPRAYERS. UNIVERSAL DESIGN WILL FIT MOST EXISTING SPRAYERS. USED
ON TURF SPRAYERS, PASTURE SPRAYING, CAT. I & 2 THREE-POINT SPRAYERS, PRE-EM BROADCAST
SPRAYING, ETC. BREAK-AWAY DESIGN TO PROTECT FROM DAMAGE AND POWDER COATED. PLUMBING
PACKAGE INCLUDES FAN TIPS AND SCREENS.
PART NO.
EB21N
EB21P
EB21Q
LENGTH
21 FT.
21 FT.
21 FT.
TYPE
NO PLUMBING
STANDARD PLUMBING-20"
QUICK TEEJET PLUMBING-20"
WT
80 LBS
84 LBS
85 LBS
LIST
PRICE
$ 690.00
793.00
940.00
CATALOG
PRICE
$ 540.00
620.00
750.00
EB28N
EB28P
EB28Q
28 FT.
28 FT.
28 FT.
NO PLUMBING
STANDARD PLUMBING-20"
QUICK TEEJET PLUMBING-20"
92 LBS
97 LBS
98 LBS
793.00
890.00
1147.00
620.00
705.00
905.00
TWIN BEAM BOOMS FOR SMALL TO MEDIUM SPRAYERS
THESE BOOMS ARE HEAVIER BUILT FOR MORE RUGGED USE. TWIN BEAM DESIGN IS HEAVIER THAN MANY SMALL BOOMS. EXCELLENT FOR
COMMERCIAL USE. GOLF COURSE SPRAYING, COMMERCIAL TURF SPRAY RIGS, NURSERY SPRAYERS, 3-POINT SPRAYERS, PASTURE
SPRAYING, ETC. GREASABLE HINGES, POWDER COATED, AND END BREAK-AWAY DESIGN TO PROTECT FROM DAMAGE TO BOOM OR OTHER
OBJECTS. PLUMBING PACKAGE INCLUDES FAN TIPS AND SCREENS.
PART NO.
TB17N
TB17P
TB17Q
LENGTH
17 FT.
17 FT.
17 FT.
TYPE
NO PLUMBING
STANDARD PLUMBING-20"
QUICK TEEJET PLUMBING-20"
WT
75 LBS
85 LBS
87 LBS
LIST
PRICE
$ 783.00
886.00
976.00
CATALOG
PRICE
$ 600.00
715.00
880.00
TB21N
TB21P
TB21Q
21 FT.
21 FT.
21 FT.
NO PLUMBING
STANDARD PLUMBING-20"
QUICK TEEJET PLUMBING-20"
85 LBS
91 LBS
93 LBS
844.00
979.00
1135.00
675.00
770.00
950.00
TB28N
TB28P
TB28Q
28 FT.
28 FT.
28 FT.
NO PLUMBING
STANDARD PLUMBING-20"
QUICK TEEJET PLUMBING-20"
97 LBS
104 LBS
106 LBS
www.sprayland.com
PAGE 14
893.00
1036.00
1144.00
705.00
790.00
1035.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
FOAM MARKERS
FM01GC FOR SMALL SPRAYERS
FM06GCA FOR TURF SPRAYERS
FM12GCA MARKER-OUR MOST POPULAR
FEATURES:
» UV PROTECTED POLYETHYLENE TANK
» WASHABLE 3-FILTER SYSTEM
» PROTECTED ELECTRICAL PARTS
» FOAM IS MADE AT THE END OF THE BOOM
» EASY TO INSTALL
» COLLECTOR HEADS CAN BE EASILY REMOVED FOR
RIBBON MARKING
» CONTROL CONSOLE HAS "ONE-SWITCH-DOES-ALL"
FEATURE (LEFT BOOM-OFF-RIGHT BOOM),
» LIGHTED BOOM INDICATORS
» 6 AND 12 GALLON MARKERS HAVE 24 FOOT CABLE
(8 FT. CAB CABLE, 16 FT. MARKER CABLE)
WITH WEATHER PACK DISCONNECTS.
» WILL SHIP UPS
AGRICULTURE, PARKS, GOLF COURSES, SPORTS FIELDS, AND MANY OTHER INDUSTRIES RELY ON CHEMICAL SPRAYING AND NEED
TO CONTROL HOW THEY SPRAY TO KEEP COSTS DOWN AND PROTECT THE ENVIRONMENT. SPRAY-LAND USA FOAM MARKERS HELP
TAKE OUT THE GUESS WORK. NO MORE SECOND GUESSING OR COUNTING ROWS! SPRAY-LAND MARKERS PRODUCE LONG LASTING
HIGH QUALITY FOAM. THE COMPACT DESIGN ALLOWS YOU TO MOUNT IT TO MOST TYPES OF SPRAYING EQUIPMENT.
THE LARGE DROPS AND THICK CONSISTENCY OF THE FOAM MAKE IT VISIBLE EVEN IN HEAVY TRASH. DYE CAN BE ADDED TO MAKE IT
EVEN MORE VISIBLE. WHEN SPRAYING TALLER PLANTS WHERE LARGE FOAM DROPS CAN FALL INTO THE PLANT CANOPY, THE
COLLECTOR HEADS CAN BE EASILY REMOVED FOR RIBBON FOAMING! SPRAY-LAND OFFERS SEVERAL MODELS TO CHOOSE FROM:
FM01GC FOR SMALL SPRAYERS (UP TO 15 FT. BOOMS), FM06GCB FOR TURF SPRAYERS (UP TO 25 FT. BOOMS), FM12GCB FOR
AGRICULTURAL SPRAYING (UP TO 60 FT BOOMS).
FOAM MARKING SYSTEMS
MODEL NO.
FM01GC
FM06GCB
FM12GCB
WT.
22
49
64
DESCRIPTION
1 GALLON
6 GALLON (TURF)
12 GALLON MARKER
LIST
PRICE
$ 495.00
706.00
727.00
CATALOG
PRICE
$400.00
615.00
645.00
COMMON REPLACEMENT PARTS
FOAM CONCENTRATE
FORMULATED TO PRODUCE
THICK, HIGH QUALITY FOAM
THAT WILL HOLD UP EVEN
UNDER THE MOST EXTREME
CONDITIONS. MIXES AT 160:1.
SHIP WT. 9 LBS.
FOAM DYE
ADD DYE TO THE FOAM TO
MAKE THE FOAM MORE
VISIBLE. SHIP WT. 2 LBS.
FOAM AND DYE CONCENTRATE
PART NO.
HF1601
RD16
BD16
DESCRIPTION
FOAM SOLUTION 160:1 (GAL)
RED FOAM DYE (PINT)
BLUE FOAM DYE (PINT)
LIST
PRICE
$ 50.00
24.60
24.60
CATALOG
PRICE
$ 39.00
21.50
21.50
PAGE 15
www.sprayland.com
LIST
PART NO.
DESCRIPTION
PRICE
TR-24
22 FT. EXTENSION CABLE
$ 27.97
FM12CB
CONTROL BOX CONSOLE
125.50
D2131F1311A
WATER PUMP-FLOJET
148.09
8000-543-250
WATER PUMP-SHURFLO
144.00
22D1180-2061002 COMPRESSOR
330.00
DF4FM
DUST FILTER
4.95
FM55LT
FOAM TUBE ASSEMBLY
16.39
FM10D
FOAM DROP ASSEMBLY (12 GAL) 24.94
FM10DT
FOAM DROP ASSEMBLY (6 GAL) 24.94
FM10DT1
FOAM DROP ASSEMBLY (1 GAL) 10.63
15006005
½" VINYL HOSE (PER FOOT)
.93
15005505
3/8" VINYL HOSE (PER FOOT)
.70
73116
1 GALLON TANK (FOR FM01GC) 16.00
FM12KIT
CHECK VALVE UPDATE KIT
20.05
FOR MARKERS BUILT BEFORE 2007
CATALOG
PRICE
$ 22.90
86.50
118.00
110.00
255.00
2.50
14.25
19.95
19.95
8.50
.75
.60
12.80
14.95
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
CAST IRON CENTRIFUGAL PUMPS
9400 SERIES BELT DRIVEN
THESE PUMP OFFERS AN ECONOMICAL, COMPACT DESIGN WITH POSITIVE TIMING BELT DRIVE. BELT TENSION IDLER WITH 12 GROOVE BELT. EPOXY COATED
CAST IRON BODY, NYLON IMPELLER, STAINLESS STEEL SHAFT, AND VITON SEAL FOR DURABILITY AND EXCELLENT CORROSION RESISTANCE.
PART NO.
9402C-540
9402C-540Q
9402C-540S
9402C-1000
9402C-1000L
9402C-1000S
9403C-540
9403C-540Q
9403C-540S
9403C-1000
9403C-1000L
9403C-1000S
94012C
3430-0332
3430-0589
3100-0006
3100-0005
MAX
RPM
600
MAX MAX
PSI GPM
80
84
NPT
PORTS
DESCRIPTION
1 ¼" INLET
FOR 1 3/8" PTO
1" OUTLET
6 SPLINE HOLLOW SHAFT
600
80
84
1 ¼" INLET
FOR 1 3/8" PTO SHAFT
1" OUTLET
6 SPLINE QUICK COUPLER
600
80
84
1 ¼" INLET
1" SOLID SHAFT
1" OUTLET
1000
80
84
1 ¼" INLET
FOR 1 3/8" PTO SHAFT
1" OUTLET
21 SPLINE HOLLOW SHAFT
1000
80
84
1 ¼" INLET
FOR 1 3/4" PTO SHAFT
1" OUTLET
20 SPLINE HOLLOW SHAFT
1000
80
84
1 ¼" INLET
1 " SOLID SHAFT
1" OUTLET
600
104
140
1 ½" INLET
FOR 1 3/8" PTO
1 ¼" OUTLET
6 SPLINE HOLLOW SHAFT
600
104
140
1 ½" INLET
FOR 1 3/8" PTO SHAFT
1 ¼" OUTLET
6 SPLINE QUICK COUPLER
600
104
140
1 ½" INLET
1" SOLID SHAFT
1 ¼" OUTLET
1000
104
140
1 ½" INLET
FOR 1 3/8" PTO SHAFT
1 ¼" OUTLET
21 SPLINE HOLLOW SHAFT
1000
104
140
1 ½" INLET
FOR 1 3/4" PTO SHAFT
1 ¼" OUTLET
20 SPLINE HOLLOW SHAFT
1000
104
140
1 ½" INLET
1" SOLID SHAFT
1 ¼" OUTLET
1000
80
84
1 ¼" INLET
FOR CUSHMAN TRUCKSTERS
1" OUTLET
6 SPLINE HOLLOW SHAFT
VITON SEAL REPAIR KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
REPLACEMENT BELT FOR 540 RPM MODELS
REPLACEMENT BELT FOR 1000 RPM MODELS
CATALOG
PRICE
$ 680.00
WT
45
HYPRO
LIST
$ 1133.00
45
1151.00
690.00
45
1151.00
690.00
42
1149.00
685.00
42
1199.00
720.00
42
1149.00
690.00
45
1279.00
770.00
45
1298.00
780.00
45
1298.00
780.00
42
1298.00
780.00
42
1347.00
810.00
42
1298.00
780.00
42
1149.00
690.00
49.25
192.00
73.00
65.00
39.50
134.50
58.00
52.00
9000 SERIES GEAR DRIVEN
THIS PTO GEAR DRIVEN PUMP IS DESIGNED FOR HIGHER PRESSURE AND CAPACITY SPRAY APPLICATIONS. GEAR BOX
IS COMPLETELY ENCLOSED AND LUBRICATED BY HIGH TEMP GEAR OIL EPOXY COATED CAST IRON BODY, NYLON
IMPELLER, AND VITON. 1 ½" NPT INLET, 1¼" NPT OUTLET.
MAX
MAX
MAX
HYPRO
CATALOG
PART NO.
RPM
PSI
GPM
DESCRIPTION
WT
LIST
PRICE
9006C-O
540
80
117
FOR 1 3/8" PTO SHAFT w/ LOCKING
44
$ 1157.00
$ 695.00
COLLAR AND MOUNTING CLIP.
9008C-O
1000
70
110
FOR 1 3/8" PTO SHAFT w/ LOCKING
45
1200.00
720.00
COLLAR AND MOUNTING CLIP.
9016C-O
540
80
117
1" SOLID SHAFT
41
1142.00
685.00
9018C-O
1000
70
110
1" SOLID SHAFT
42
1186.00
710.00
9028C-O
1000
70
110
FOR 1 3/4" PTO SHAFT w/ LOCKING
48
1392.00
835.00
COLLAR AND MOUNTING CLIP
3430-0333
VITON SEAL REPAIR KIT
63.60
50.00
3430-0591
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
201.00
140.00
9300 SERIES HYDRAULIC MOTOR DRIVEN
THE HYPRO 9300 SERIES PUMP IS DRIVEN BY A HYDRAULIC ORBITAL MOTOR. WORKS ON OPEN AND CLOSED CENTER
HYDRAULIC SYSTEMS (CALL SPRAY-LAND WITH YOUR TRACTOR MODEL AND YEAR). EPOXY COATED CAST IRON BODY,
NYLON IMPELLER, AND VITON. CAST IRON HYDRAULIC MOTOR HAS CHECK VALVE TO PREVENT DAMAGE TO THE HYDRAULIC
SYSTEM.
MAX MAX
HYPRO
CATALOG
PART NO.
PSI
GPM DESCRIPTION
WT
LIST
PRICE
9303C-HM1C
180
114 10 GPM MOTOR FOR OPEN CENTER SYSTEMS
26
$ 1066.00
$ 665.00
9303C-HM2C
180
82 5 GPM MOTOR FOR CLOSED CENTER SYSTEMS
26
1066.00
665.00
9303C-HM3C
180
106 20 GPM MOTOR FOR LARGE OPEN SYSTEMS
26
1133.00
705.00
9303C-HM4C
180
95 7 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
26
1066.00
665.00
9306C-HM1C
130
190 10 GPM MOTOR FOR OPEN CENTER SYSTEMS
32
1245.00
780.00
9306C-HM3C
130
190 20 GPM MOTOR FOR LARGE OPEN SYSTEMS
32
1316.00
820.00
9306C-HM5C
130
190 15 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
32
1245.00
780.00
3430-0332
VITON SEAL REPAIR KIT
49.25
39.50
3430-0589
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
192.00
134.50
www.sprayland.com
PAGE 16
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
CAST IRON CENTRIFUGAL PUMPS
9200 SERIES PEDESTAL PUMPS
PEDESTAL MOUNTED 9200 PUMPS ARE DESIGNED FOR DIRECT DRIVE OR BELT AND PULLEY DRIVE TO
A GAS ENGINE OR ELECTRIC MOTOR. USED ON SELF-CONTAINED SPRAY EQUIPMENT AND COUNTLESS OTHER USES.
EPOXY COATED CAST IRON BODY, NYLON IMPELLER, STAINLESS STEEL SHAFT, AND VITON SEAL MEANS EXCELLENT
CORROSION RESISTANCE. OUTLET PORT CAN BE ROTATED IN 90º INCREMENTS.
PART NO.
9202C
MAX
RPM
6000
MAX
PSI
180
MAX
GPM
105
9203C
6000
180
136
9203C-R
6000
180
136
9205C
4200
190
180
9206C
4200
190
80
3430-0332
3430-0589
DESCRIPTION
5/8" SOLID SHAFT, CCW ROTATION
1 ¼" NPT INLET, 1" NPT OUTLET
5/8" SOLID SHAFT, CCW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
5/8" SOLID SHAFT, CW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
5/8" SOLID SHAFT, CCW ROTATION
2" NPT INLET, 1 ½" NPT OUTLET
7/8" SOLID SHAFT, CCW ROTATION
2" NPT INLET, 1 ½" NPT OUTLET
HYPRO
LIST
$ 479.00
CATALOG
PRICE
$ 285.00
19
485.00
290.00
19
497.00
300.00
20
1219.00
730.00
47
636.00
380.00
49.25
192.00
39.50
134.00
WT
18
VITON SEAL REPAI KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
LIFE GUARD® SILICON CARBIDE SEAL ……………….. ADD SUFFIX LETTER “B” TO PART NUMBER (EX: 9203C-B) ………………………………ADD: $76.00
9200 SERIES MODELS WITH 12 VOLT CLUTCH
THE 9200 SERIES PUMP EQUIPPED WITH A 12 VOLT HEAVY DUTY CLUTCH IS IDEAL FOR APPLICATIONS WHERE
HYDRAULIC OR PTO DRIVE IS NOT PRACTICAL. PUMP IS ENGAGED WITH THE FLICK OF A SWITCH.
EPOXY COATED CAST IRON BODY, NYLON IMPELLER, STAINLESS STEEL SHAFT, AND VITON SEAL FOR
CHEMICAL RESISTANCE.
MAX
MAX
MAX
HYPRO CATALOG
PART NO.
RPM
PSI
GPM
DESCRIPTION
WT
LIST
PRICE
9263C-C
5000
80
124
CCW ROTATION, 1 ½" NPT INLET,
23
$ 904.00
$ 540.00
1 ¼" NPT OUTLET
9263C-CR
5000
80
124
CW ROTATION, 1 ½" NPT INLET,
21
915.00
556.00
1 ¼" NPT OUTLET
3430-0332
VITON SEAL REPAIR KIT
49.25
39.50
3430-0589
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
192.00
134.00
LIFE GUARD® SILICON CARBIDE SEAL ……………….. ADD SUFFIX LETTER “B” TO PART NUMBER (EX: 9263C-CB) ………………………………ADD: $76.00
GAS ENGINE DRIVEN CENTRIFUGAL PUMPS
CENTRIFUGAL PUMP DIRECT DRIVEN BY 5.5 HP HONDA ENGINE AND MOUNTED TO BLACK
ENAMELEDBASE PLATE. EASY STARTING, OIL ALERT™ PROTECTION, 75 PSI 70 GPM MAX. RATINGS.
USED ON PICK UP SPRAYERS, ATV SPRAYERS, TURF SPRAYING EQUIPMENT, AND CHEMICAL AND
WATER TRANSFER. TWO MODELS AVAILABLE: CAST IRON PUMP FOR PUMPING WATER,
PESTICIDES, AND HERBICIDES; AND POLYPROPYLENE PUMP FOR PUMPING ACID BASED
FERTILIZERS, CALCIUM CHLORIDE, AND ACIDS.
PART NO.
GE920C
GE950P
www.sprayland.com
DESCRIPTION
CAST IRON PUMP UNIT
POLYPROPYLENE PUMP UNIT
PAGE 17
WT
70
68
LIST
$ 1098.00
1243.00
CATALOG
PRICE
$ 825.00
895.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
STAINLESS CENTRIFUGAL PUMPS
9200 SERIES PEDESTAL PUMPS
PEDESTAL MOUNTED 9200 PUMPS ARE DESIGNED FOR DIRECT DRIVE OR BELT AND PULLEY DRIVE TO
A GAS ENGINE OR ELECTRIC MOTOR. USED ON DE-ICE SPRAY EQUIPMENT , ACID SPRAYING, AND OTHER
APPLICATIONS. 316 STAINLESS STEEL BODY, STAINLESS STEEL SHAFT, AND SILICON CARBIDE SEAL FOR MAXIMUM
EXCELLENT CORROSION RESISTANCE. OUTLET PORT CAN BE ROTATED IN 90º INCREMENTS.
PART NO.
9203S
MAX
RPM
6000
9203S-R
6000
9206S
4200
3430-0589
MAX
PSI
170
MAX
GPM
136
DESCRIPTION
5/8" SOLID SHAFT, CCW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
170
136
5/8" SOLID SHAFT, CW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
80
225
5/8" SOLID SHAFT, CCW ROTATION
2" NPT INLET, 1 ½" NPT OUTLET
SILICON CARBIDE SEAL KIT
HYPRO
LIST
$ 1096.00
CATALOG
PRICE
$ 655.00
19
1106.00
665.00
20
1309.00
785.00
192.00
134.00
WT
19
9200 SERIES MODELS WITH 12 VOLT CLUTCH
THE 9200S SERIES PUMP EQUIPPED WITH A 12 VOLT HEAVY DUTY CLUTCH. PUMP IS ENGAGED WITH THE FLICK OF A
SWITCH.
PART NO.
9263S-C
MAX
RPM
5000
9263S-CR
5000
3430-0589
MAX
PSI
124
MAX
GPM
140
DESCRIPTION
CCW ROTATION, 1 ½" NPT INLET,
1 ¼" NPT OUTLET
124
140
CW ROTATION, 1 ½" NPT INLET,
1 ¼" NPT OUTLET
SILICON CARBIDE SEAL KIT
HYPRO CATALOG
LIST
PRICE
$ 1550.00
$ 930.00
WT
23
23
1562.00
935.00
192.00
134.00
9300 SERIES HYDRAULIC MOTOR DRIVEN
THE HYPRO 9300 SERIES PUMP IS DRIVEN BY A HYDRAULIC ORBITAL MOTOR. WORKS ON OPEN AND CLOSED CENTER
HYDRAULIC SYSTEMS (CALL SPRAY-LAND WITH YOUR TRACTOR MODEL AND YEAR TO FIND OUT WHICH PUMP YOU
NEED). 316 STAINLESS STEEL BODY, STAINLESS STEEL SHAFT, AND SILICON CARBIDE SEAL. CAST IRON HYDRAULIC
MOTOR HAS CHECK VALVE TO PREVENT DAMAGE TO THE HYDRAULIC SYSTEM. PUMP PORTS:
PART NO.
9303S-HM1C
9303S-HM2C
9303S-HM3C
9303S-HM4C
9306S-HM1C
9306S-HM3C
9306S-HM5C
3430-0589
www.sprayland.com
MAX
PSI
130
95
85
95
115
80
95
MAX
GPM
114
97
125
115
210
190
210
DESCRIPTION
10 GPM MOTOR FOR OPEN CENTER SYSTEMS
5 GPM MOTOR FOR CLOSED CENTER SYSTEMS
20 GPM MOTOR FOR LARGE OPEN SYSTEMS
7 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
10 GPM MOTOR FOR OPEN CENTER SYSTEMS
20 GPM MOTOR FOR LARGE OPEN SYSTEMS
15 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
SILICON CARBIDE SEAL KIT
PAGE 18
WT
26
26
26
26
32
32
32
HYPRO
LIST
$ 1954.00
1954.00
2025.00
1954.00
2311.00
2382.00
2311.00
192.00
CATALOG
PRICE
$ 1170.00
1170.00
1215.00
1170.00
1385.00
1430.00
1385.00
134.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
POLY CENTRIFUGAL PUMPS
POLYPROPYLENE PUMPS ARE NOTED FOR THEIR DURABILITY, LIGHT WEIGHT, AND CORROSION RESISTANCE. THESE
PUMPS ARE DESIGNED FOR PUMPING ACID BASED FERTILIZERS, CALCIUM CHLORIDE, AND OTHER HIGHLY CORROSIVE
CHEMICALS AND ACIDS.
9000 SERIES GEAR DRIVEN
THE GEAR BOX IS COMPLETELY ENCLOSED AND LUBRICATED BY HIGH TEMP GEAR OIL. POLYPROPYLENE IMPELLER,
AND VITON SEAL. DESIGNED FOR HIGHER PRESSURES AND FLOW CAPACITY ON PTO DRIVEN APPLICATIONS. 1 ½" NPT
INLET, 1¼" NPT OUTLET.
PART NO.
9006P-O
MAX
RPM
540
9008P-O
1000
9016P-O
9018P-O
3430-0333
3430-0590
540
1000
MAX
PSI
80
MAX
GPM
117
DESCRIPTION
FOR 1 3/8" PTO SHAFT w/ LOCKING
COLLAR AND MOUNTING CLIP
70
110
FOR 1 3/8" PTO SHAFT w/ LOCKING
COLLAR AND MOUNTING CLIP
80
117
1" SOLID SHAFT
70
110
1" SOLID SHAFT
VITON SEAL REPAIR KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
CATALOG
PRICE
$ 730.00
WT
37
HYPRO
LIST
$ 1213.00
37
1213.00
730.00
40
42
1198.00
1198.00
63.60
219.00
725.00
725.00
50.00
153.00
9300 SERIES HYDRAULIC MOTOR DRIVEN
THE HYPRO 9300P SERIES PUMP IS DRIVEN BY A HYDRAULIC ORBITAL MOTOR. WORKS ON OPEN AND
CLOSED CENTER HYDRAULIC SYSTEMS (CALL SPRAY-LAND WITH YOUR TRACTOR MODEL AND YEAR
TO FIND OUT WHICH PUMP YOU NEED). THESE PUMPS ARE LIGHTWEIGHT, COMPACT, POLYPROPYLENE IMPELLER,
HARDENED STAINLESS STEEL SHAFT, AND TEFLON DOUBLE LIP SEAL. 1 ½" NPT INLET, 1¼" NPT OUTLET.
PART NO.
9303P-HM1C
9303P-HM2C
9303P-HM3C
9303P-HM4C
3430-0333
3430-0590
MAX
PSI
80
80
80
80
MAX
GPM
DESCRIPTION
90
10 GPM MOTOR FOR OPEN CENTER SYSTEMS
90
5 GPM MOTOR FOR CLOSED CENTER SYSTEMS
90
20 GPM MOTOR FOR LARGE OPEN SYSTEMS
90
7 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
VITON SEAL REPAIR KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
WT
20
20
21
20
HYPRO
LIST
$ 1099.00
1099.00
1161.00
1099.00
63.60
219.00
CATALOG
PRICE
$ 660.00
660.00
700.00
660.00
50.00
153.00
9200 SERIES PEDESTAL
PEDESTAL MOUNTED 9200 PUMPS ARE DESIGNED FOR DIRECT DRIVE OR BELT AND PULLEY DRIVE TO
A GAS ENGINE OR ELECTRIC MOTOR. USED ON SELF-CONTAINED SPRAY EQUIPMENT AND COUNTLESS OTHER USES.
POLYPROPYLENE IMPELLER, STAINLESS STEEL SHAFT, AND VITON SEAL.
MAX
RPM
4200
PART NO.
9203P-S
MAX
PSI
80
MAX
GPM
92
DESCRIPTION
7/8" SOLID SHAFT, CCW ROTATION
1 ½" NPT INLET, 1¼" NPT OUTLET
4200
80
83
7/8" SOLID SHAFT, CW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
4200
80
100
WITH 12 VOLT CLUTCH/PULLEY
CCW ROTATION, 1 ½" NPT x 1" NPT
VITON SEAL REPAIR KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
9500P-S
9253P-C
3430-0333
3430-0590
CATALOG
PRICE
$ 355.00
WT
13
HYPRO
LIST
$ 593.00
14
642.00
385.00
19
1400.00
840.00
63.60
219.00
50.00
153.00
HYPRO
LIST
$ 1370.00
CATALOG
PRICE
$ 820.00
43
1370.00
820.00
43
1370.00
820.00
40
1388.00
830.00
40
1438.00
865.00
40
1388.00
830.00
63.60
219.00
50.00
153.00
9400 SERIES BELT DRIVE
PART NO.
9403P-540
9403P-540Q
9403P-540S
9403P-1000
9403P-1000L
9403P-1000S
3430-0333
3430-0590
MAX
RPM
600
MAX
PSI
80
MAX
GPM
92
NPT
PORTS
DESCRIPTION
1 ¼" INLET
FOR 1 3/8" PTO
1" OUTLET
6 SPLINE HOLLOW SHAFT
600
80
92
1 ¼" INLET
FOR 1 3/8" PTO SHAFT
1" OUTLET
6 SPLINE QUICK COUPLER
600
80
92
1 ¼" INLET
1" SOLID SHAFT
1" OUTLET
1000
80
92
1 ¼" INLET
FOR 1 3/8" PTO SHAFT
1" OUTLET
21 SPLINE HOLLOW SHAFT
1000
80
92
1 ¼" INLET
FOR 1 3/4" PTO SHAFT
1" OUTLET
20 SPLINE HOLLOW SHAFT
1000
80
92
1 " INLET
1" SOLID SHAFT
1" OUTLET
VITON SEAL REPAIR KIT
LIFE GUARD® SILICONE CARBIDE SEAL REPAIR KIT
19
WT
43
SELF-PRIMING CENTRIFUGAL PUMPS
9000 SERIES GEAR DRIVEN
THE GEAR BOX IS COMPLETELY ENCLOSED AND LUBRICATED BY HIGH TEMP GEAR OIL. GLASS-FILLED NYLON
IMPELLER, AND VITON SEAL. DESIGNED FOR HIGHER PRESSURES AND FLOW CAPACITY ON PTO DRIVEN
APPLICATIONS. 1 ½" NPT INLET, 1¼" NPT OUTLET.
PART NO.
9006C-O-SP
9016C-O-SP
3430-0480SP
3430-0590
MAX
RPM
540
540
MAX
PSI
77
MAX
GPM
120
DESCRIPTION
FOR 1 3/8" PTO SHAFT w/ LOCKING
COLLAR AND MOUNTING CLIP
77
120
1" SOLID SHAFT
SELF PRIMING CHAMBER KIT
LEFE GUARD® SILICON CARBIDE SEAL
WT
62
HYPRO
LIST
$ 1552.00
CATALOG
PRICE
$ 915.00
1536.00
291.00
219.00
920.00
203.00
153.00
56
25
9300 SERIES HYDRAULIC MOTOR DRIVEN
THE HYPRO 9300P SERIES PUMP IS DRIVEN BY A HYDRAULIC ORBITAL MOTOR. WORKS ON OPEN AND
CLOSED CENTER HYDRAULIC SYSTEMS (CALL SPRAY-LAND WITH YOUR TRACTOR MODEL AND YEAR
TO FIND OUT WHICH PUMP YOU NEED). THESE PUMPS ARE LIGHTWEIGHT, COMPACT, POLYPROPYLENE IMPELLER,
HARDENED STAINLESS STEEL SHAFT, AND TEFLON DOUBLE LIP SEAL. 1 ½" NPT INLET, 1¼" NPT OUTLET.
PART NO.
9303C-HM1C-SP
9303C-HM2C-SP
9303C-HM3C-SP
9303C-HM4C-SP
3430-0480SP
3430-0589
MAX
PSI
130
90
120
99
MAX
GPM
DESCRIPTION
122
10 GPM MOTOR FOR OPEN CENTER SYSTEMS
104
5 GPM MOTOR FOR CLOSED CENTER SYSTEMS
120
20 GPM MOTOR FOR LARGE OPEN SYSTEMS
99
7 GPM MOTOR FOR OPEN/CLOSED SYSTEMS
SELF PRIMING CHAMBER KIT
LEFE GUARD® SILICON CARBIDE SEAL
WT
38
38
38
38
27
CATALOG
PRICE
$ 870.00
870.00
910.00
870.00
203.00
134.00
HYPRO
LIST
$ 1453.00
1453.00
1521.00
1453.00
291.00
192.00
9200 SERIES PEDESTAL
PEDESTAL MOUNTED 9200 PUMPS ARE DESIGNED FOR DIRECT DRIVE OR BELT AND PULLEY DRIVE TO
A GAS ENGINE OR ELECTRIC MOTOR. USED ON SELF-CONTAINED SPRAY EQUIPMENT AND COUNTLESS OTHER
USES. POLYPROPYLENE IMPELLER, STAINLESS STEEL SHAFT, AND VITON SEAL.
MAX
RPM
4200
PART NO.
9203C-SP
9203C-R-SP
3430-0480SP
3430-0589
MAX
PSI
157
MAX
GPM
120
DESCRIPTION
7/8" SOLID SHAFT, CCW ROTATION
1 ½" NPT INLET, 1¼" NPT OUTLET
4200
155
140
7/8" SOLID SHAFT, CW ROTATION
1 ½" NPT INLET, 1 ¼" NPT OUTLET
SELF PRIMING CHAMBER KIT
LEFE GUARD® SILICON CARBIDE SEAL
CATALOG
PRICE
$ 525.00
WT
38
HYPRO
LIST
$ 873.00
38
883.00
530.00
26
291.00
192.00
203.00
134.00
9400 SERIES BELT DRIVE
PART NO.
9403C-540-SP
9403C-540Q-SP
9403C-540S-SP
9403C-1000-SP
9403C-1000L-SP
3430-0480SP
3430-0589
www.sprayland.com
MAX
RPM
600
MAX
PSI
99
MAX
GPM
120
NPT
PORT
DESCRIPTION
1 ½" INLET
FOR 1 3/8" PTO
1 ¼" OUTLET 6 SPLINE HOLLOW SHAFT
600
99
120
1 ½" INLET
FOR 1 3/8" PTO SHAFT
1 ¼" OUTLET 6 SPLINE QUICK COUPLER
600
99
120
1 ½" INLET
1" SOLID SHAFT
1 ¼" OUTLET
1000
99
120
1 ½" INLET
FOR 1 3/8" PTO SHAFT
1 ¼" OUTLET 21 SPLINE HOLLOW SHAFT
1000
99
120
1 ½" INLET
FOR 1 3/4" PTO SHAFT
1 ¼" OUTLET 20 SPLINE HOLLOW SHAFT
SELF PRIMING CHAMBER KIT
LEFE GUARD® SILICON CARBIDE SEAL
PAGE 20
HYPRO
LIST
$ 1686.00
CATALOG
PRICE
$ 1010.00
57
1704.00
1025.00
57
1704.00
1025.00
52
1704.00
1025.00
52
1753.00
1050.00
27
291.00
192.00
203.00
134.00
WT
57
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ROLLER PUMPS
ROLLER PUMPS ARE DESIGNED FOR SPRAYING AND TRANSFERRING A VARIETY OF LIQUIDS LIKE FERTILIZER, HERBICIDES,
PESTICIDES, WATER, AND MANY OTHERS. THESE PUMPS ARE POSITIVE DISPLACEMENT WHICH WILL PROVIDE HIGHER PRESSURE
AND LOWER VOLUME THAN CENTRIFUGAL PUMPS. HYPRO PUMPS ARE AVAILABLE IN THREE BODY MATERIALS: CAST IRON FOR
GENERAL SPRAYING, NI-RESIST FOR SPRAYING FERTILIZERS AND CORROSIVE MATERIALS, AND SILVERCAST™ FOR MAXIMUM
WEARABILITY. ALL HYPRO ROLLER PUMPS HAVE SUPER ROLLERS STANDARD BUT TEFLON AND BUNA-N ROLLERS ARE AVAILABLE
FOR AN ADDITIONAL COST.
1200 SERIES-4 ROLLER
» 600 RPM MAX.
» 74 GPM MAX. FLOW
» 150 PSI MAX. PRESSURE
» 1" SOLID SHAFT
» 1 ½" NPT PORTS
» WEIGHT-32 LBS
1500 SERIES-6 ROLLER
» 1000 RPM MAX.
» 62 GPM MAX. FLOW
» 150 PSI MAX. PRESSURE
» 15/16" SOLID SHAFT
» 1 ½" NPT PORTS
» WEIGHT-27 LBS
1700 SERIES-5 ROLLER
» 1000 RPM MAX.
» 45 GPM MAX. FLOW
» 200 PSI MAX. PRESSURE
» 15/16" SOLID SHAFT
» 1" NPT PORTS
» WEIGHT-21 LBS.
6500 SERIES-6 ROLLER
» 1200 RPM MAX.
» 22 GPM MAX. FLOW
» 300 PSI MAX. PRESSURE
» ¾" SOLID SHAFT
» ¾" NPT PORTS
» WEIGHT-9LBS.
7560 SERIES-8 ROLLER
» 1000 RPM MAX.
» 22 GPM MAX. FLOW
» 300 PSI MAX. PRESSURE
» 15/16"" SOLID SHAFT
» ¾" NPT PORTS
» WEIGHT-14 LBS
7700 SERIES-7 ROLLER
» 800 RPM MAX.
» 28 GPM MAX. FLOW
» 200 PSI MAX. PRESSURE
» 15/16" SOLID SHAFT
» ¾" NPT PORTS
» WEIGHT-14 LBS
HYPRO CATALOG
LIST
PRICE
MODEL
NUMBER
MATERIAL
1200C
CAST IRON
1502C
CAST IRON
1502N
NI-RESIST
1502XL
SILVERCAST™ $ 1458.00
$ 875.00
1700C
CAST IRON
$ 415.00
$ 250.00
1700N
NI-RESIST
$ 860.00
$ 515.00
1700XL
SILVERCAST™ $ 1163.00 $ 695.00
6500C
CAST IRON
$ 201.00
$ 120.00
6500N
NI-RESIST
$ 457.00
$ 275.00
6500XL
SILVERCAST™ $ 643.00
$ 385.00
7560C
CAST IRON
$ 264.00
$ 160.00
7560N
NI-RESIST
$ 527.00
$ 315.00
7560XL
SILVERCAST™ $ 766.00
$ 460.00
7700C
CAST IRON
$ 269.00
$ 160.00
7700N
NI-RESIST
$ 522.00
$ 315.00
7700XL
SILVERCAST™ $ 784.00
$ 470.00
$ 1035.00
$ 635.00
$ 380.00
$ 1057.00
$ 635.00
FOR REVERSE ROTATION (FOR GAS ENGINE DRIVEN APPLICATIONS) ADD SUFFIX LETTER "-R" TO PART NUMBER
www.sprayland.com
PAGE 21
$ 625.00
ADD $ 8.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ROLLER PUMPS
THESE COMPACT ROLLER PUMPS ARE USED FOR A VARIETY OF SMALL PUMPING APPLICATIONS. THESE
PUMPS ARE AVAILABLE IN THREE BODY MATERIALS: CAST IRON FOR GENERAL SPRAYING, NI-RESIST FOR
SPRAYING FERTILIZERS AND CORROSIVE MATERIALS, AND SILVERCAST™. THE 4101 SERIES PUMPS ARE
FOR USE WITH ELECTRIC MOTORS AND THE 4101 SERIES ARE FOR USE WITH GAS ENGINES.
4001 SERIES-4 ROLLER
» 1800 RPM MAX.
» 9 GPM MAX. FLOW
» 150 PSI MAX. PRESSURE
» 5/8" SOLID SHAFT
» ¾" NPT PORTS
» WEIGHT-5 LBS
4101 SERIES-4 ROLLER
» 2600 RPM MAX.
» 7 GPM MAX. FLOW
» 150 PSI MAX. PRESSURE
» 5/8" SOLID SHAFT
» ¾" NPT PORTS
» WEIGHT-5 LBS
4001C
CAST IRON
$ 199.00
$ 120.00
4001N
NI-RESIST
$ 345.00
$ 205.00
4001XL
SILVERCAST™ $ 511.00
$ 305.00
4101C
CAST IRON
$ 186.00
$ 112.00
4101N
NI-RESIST
$ 333.00
$ 200.00
4101XL
SILVERCAST™ $ 498.00
$ 300.00
FOR 1/2" HOLLOW SHAFT INSTEAD OF SOLID SHAFT ADD SUFFIX LETTER "-H" TO PART NUMBER ......... ADD $ 16.50
FOR REVERSE ROTATION (FOR GAS ENGINES) ADD SUFFIX LETTER "-R" TO PART NUMBER ................... ADD
7.00
12 VOLT DC MOTOR DRIVEN ROLLER PUMPS
4101 ROLLER PUMP COUPLED TO A 12 VOLT DC MOTOR. USED FOR A VARIETY OF SPRAYING JOBS
INCLUDING FERTILIZER APPLICATORS, HERBICIDE AND INSECTICIDE SPRAYING, ORCHARDS,
GREENHOUSES, AND LIVESTOCK SPRAYING. SHIP WT. 18 LBS.
HYPRO CATALOG
PART NO.
MAX PSI
MAX GPM
PUMP CAST MATERIAL
LIST
PRICE
4001N-EH
30
10.4
NI-RESIST
$ 745.00
$ 445.00
4001XL-EH
30
10.4
SILVERCAST™
912.00
545.00
4101N-EH
50
7.5
NI-RESIST
734.00
440.00
4101XL-EH
50
7.5
SILVERCAST™
900.00
540.00
4001N-E2H
60
9.9
NI-RESIST
827.00
495.00
4001XL-E2H
60
9.9
SILVERCAST™
995.00
595.00
4101N-E2H
100
5.9
NI-RESIST
816.00
490.00
4101XL-E2H
100
5.9
SILVERCAST™
982.00
590.00
ROLLER PUMP REPAIR KITS
REPAIR KITS INCLUDE SUPPER ROLLERS, O-RING GASKET, AND 2 SHAFT SEALS.
HYPRO
CATALOG
PART NO.
FOR PUMP MODELS:
LIST
PRICE
3430-0386
1500 SERIES
$ 74.00
$ 56.25
3430-0437
1700 SERIES
66.00
50.25
3430-0380
6500 SERIES
38.50
29.25
3430-0381
7560 SERIES
55.75
42.50
3430-0384
7700 SERIES
52.25
41.75
PTO PUMP COUPLERS
QUICK COUPLERS
PART NO.
1321-0006
1320-0033
1321-0007
1321-0012
1321-0013
1320-0078
1320-0080
PTO RPM
540
540/1000
540
540/1000
540/1000
1000
1000
PTO SHAFT/SPLINE
PUMP SHAFT
1 3/8" QUICK COUPLER/6 SPLINE
5/8"
1 3/8"/SMOOTH BORE
15/16"
1 3/8" QUICK COUPLER/6 SPLINE
15/16"
1 3/8" QUICK COUPLER/MULTI-SPEED
5/8"
1 3/8" QUICK COUPLER/MULTI-SPEED
15/16"
1 3/8" FORGED STEEL/21 SPLINE
15/16"
1 3/4" FORGED STEEL/20 SPLINE
15/16"
HYPRO
LIST
$ 43.75
32.25
47.50
43.00
45.50
46.75
70.50
CATALOG
PRICE
$ 35.00
25.75
35.50
32.25
34.00
35.00
52.75
SMOOTH BORE &
SPLINED COUPLERS
FORGED STEEL COUPLERS
www.sprayland.com
PAGE 22
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
DIAPHRAGM PUMPS
DIAPHRAGM PUMPS ARE POSITIVE DISPLACEMENT PUMPS WITH MODELS AVAILABLE FROM 275 PSI TO 850 PSI AND 3.5
GPM TO 62 GPM. SOME OF THE FEATURES INCLUDE: OIL BATH CRANKCASE, OIL LEVEL SIGHT GLASS, BUILT-IN
PULSATION DAMPENERS, EASILY ADAPTS TO PTO OR GAS ENGINE, OMNI-DIRECTIONAL, AND CAN BE RUN DRY WITHOUT
DAMAGE TO THE PUMP. MAXIMUM FLUID TEMPERATURE IS 140°F. ORDER PRESSURE CONTROLS, SHAFT KITS, AND GEAR
BOXES ON THE NEXT PAGE.
MODEL 9910-D70 LOW PRESSURE PUMP
» 550 RPM MAX.
» 19 GPM MAX.
» 290 PSI MAX.
» 1¼" BARB INLET, ¾" BARB OUTLET
» DIAPHRAGMS: 2
» WEIGHT-22 LBS
MODEL
NUMBER
HYPRO
LIST
9910-D70
9910-D70GR
W/GEARBOX FOR 5-6.5 HP ENGINE
CATALOG
PRICE
$ 1170.00
$ 705.00
$ 1947.00
$1170.00
MODEL 9910-D115 LOW PRESSURE PUMP
» 550 RPM MAX.
» 30.1 GPM MAX.
» 290 PSI MAX.
» 1 ¼" BARB INLET, 1" BARB OUTLET
» DIAPHRAGMS: 3
» WEIGHT-35 LBS
9910-D115
9910-D115GR34
W/GEARBOX FOR 5-6.5 HP ENGINE
$ 1756.00
$ 1055.00
$ 2354.00
$1415.00
$ 843.00
$ 505.00
$ 1167.00
$ 700.00
MODEL 9910-D252 MEDIUM PRESSURE PUMP
» 3600 RPM MAX.
» 6 GPM MAX.
» 290 PSI MAX.
» ¾" BARB INLET, 5/8" BARB OUTLET
» DIAPHRAGMS: 2
» WEIGHT-12 LBS.
9910-D252
9910-D252GRGI
W/GEARBOX FOR 3 HP ENGINE
MODEL 9910-D30 MEDIUM PRESSURE PUMP
» 600 RPM MAX.
» 9.5 GPM MAX.
» 550 PSI MAX.
» 1" BARB INLET, ½" BARB OUTLET
» DIAPHRAGMS: 2
» WEIGHT-23 LBS
9910-D30
9910-D30AP-A
9910-D30GRGI
3/4” SOLID EXTENDED SHAFT
W/GEARBOX & CONTROL FOR 5-6.5 HP
$ 1054.00
$ 635.00
$ 1125.00
$ 675.00
$ 1891.00
$ 1135.00
$ 1493.00
$ 895.00
$ 1564.00
$ 940.00
$ 1859.00
$ 1115.00
$ 3183.00
$ 1910.00
$ 3581.00
$ 2150.00
MODEL 9910-D50 MEDIUM PRESSURE PUMP
» 600 RPM MAX.
» 14 GPM MAX.
» 550 PSI MAX.
» 1" BARB INLET, ½" BARB OUTLET
» DIAPHRAGMS: 2
» WEIGHT-35 LBS
9910-D50
9910-D50AP-A
3/4” SOLID EXTENDED SHAFT
MODEL 9910-D813 HIGH PRESSURE PUMP
» 550 RPM MAX.
» 21.4 GPM MAX.
» 725 PSI MAX.
» 1 ¼" BARB INLET, ¾" BARB OUTLET
» 1 3/8" 6 SPLINE SHAFT
» DIAPHRAGMS: 3
» WEIGHT-66 LBS (TRUCK)
9910-D813
9910-D813GRGI
W/GEARBOX & CONTROL FOR 11 HP
MODEL 9910-D1516 HIGH PRESSURE PUMP
» 550 RPM MAX.
» 40 GPM MAX.
» 725 PSI MAX.
» 1 ½" BARB INLET, ¾" BARB OUTLET
» 1 3/8" 6 SPLINE THRU-SHAFT
» DIAPHRAGMS: 6
» WEIGHT-78 LBS (TRUCK)
9910-D1516
OTHER DIAPHRAGM PUMP MODELS AND ACCESSORIES AVAILABLE NOT SHOWN IN THIS CATALOG. CALL SPRAY-LAND FOR SPECIFICATIONS.
www.sprayland.com
PAGE 23
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
DIAPHRAGM PUMP ACCESSORIES
CONTROL UNITS
CONTROL UNITS ARE FOR EASY FLOW AND PRESSURE CONTROL OF YOUR SPRAYING SYSTEM. THESE UNITS
INCLUDE A PRESSURE RELIEF VALVE, OIL FILLED GAUGE, AND OUTLET VALVES TO CONTROL FLOW.
PART NO.
9910-KIT1994
MAX
GPM
6
MAX
PSI
290
PART NO.
9910-GS40G1
MAX
GPM
15
MAX
PSI
580
PART NO.
9910-GS50GI
MAX
GPM
35
MAX
PSI
700
DESCRIPTION
FOR MODEL 9910-D252 PUMP. 5/8"
BYPASS BARB, 3/8" OUTLET BARB.
WT
1
DESCRIPTION
FOR 9910-D30 AND 9910-D50 PUMPS.
5/8" BYPASS BARB, (2) 1/2" OUTLET
DESCRIPTION
FOR 9910-D813 & D1516 PUMPS.
WT
4
WT
4
HYPRO
LIST
$ 147.00
CATALOG
PRICE
$ 110.00
HYPRO
LIST
$ 296.00
CATALOG
PRICE
$ 220.00
HYPRO
LIST
$ 577.00
CATALOG
PRICE
$ 430.00
DRIVE KITS FOR DIAPHRAGM PUMPS
GEAR REDUCTION KITS
GEAR REDUCTION UNITS DESIGNED FOR DIRECT
MOUNTING DIAPHRAGM PUMPS TO GAS ENGINES
FOR 5-6.5 HP ENGINES FITS 9910-D30 & D303
PUMPS. 6:1 REDUCTION. SHIP WT. 7 LBS
MODEL
NUMBER
9910-KIT1640
HYPRO
LIST
$ 689.00
CATALOG
PRICE
$ 515.00
FOR 8-18 HP GAS ENGINES WITH 1" SHAFT. FITS
9910-D50, D503, & D813 PUMPS. 6:1 REDUCTION.
SHIP WT. 9 LBS.
MODEL
NUMBER
9910-KIT1642
HYPRO
LIST
$ 861.00
CATALOG
PRICE
$ 645.00
HYDRAULIC MOTOR MOUNTING KITS
INCLUDES MOTOR MOUNTING FLANGE,
1” HOLLOW SHAFT AND TWO BOLTS.
FITS 9910-D30, -D303, -D403, -D50, -D50D,
-D813, -D1064 AND -D1265 PUMPS. SHIP
WT. 6 LBS
MODEL
NUMBER
9910-HYD5312
HYPRO
LIST
$ 288.00
CATALOG
PRICE
$ 215.00
INCLUDES MOTOR MOUNTING FLANGE, ONE
COUPLING, AND TWO PINS. FITS 9910-D70 AND
-D115 PUMPS. SHIP WT. 6 LBS
MODEL
NUMBER
9910-HYD2495
HYPRO
LIST
$ 288.00
CATALOG
PRICE
$ 215.00
1" SOLID SHAFT KITS
KITS INCLUDE SOLID SHAFT ADAPTER, MOUNTING BRACKETS, AND NECESSARY HARDWARE.
PART NO.
9910-KIT1703
9910-KIT1707
9910-KIT1711
9910-KIT2202
9910-KIT2203
www.sprayland.com
DESCRIPTION
FOR 9910-D30 PUMP
FOR 9910-D50 PUMP
FOR 9910-D70 & D115 PUMPS
FOR 9910-D303, D503, PUMPS
FOR 9910-D813 PUMP
PAGE 24
WT
3
4
5
4
4
HYPRO
LIST
$ 174.00
216.00
305.00
156.00
156.00
CATALOG
PRICE
$ 139.00
173.00
244.00
125.00
125.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
TRANSFER PUMPS
TRANSFER PUMPS
PACER “S” SERIES BRIGGS INTEK DRIVEN TRANSFER
PUMPS ARE LIGHTWEIGHT, PORTABLE, AND SELF
PRIMING. PUMP IS CONSTRUCTED OF A GLASS-FILLED
POLYESTER BODY, EPDM SEALS, AND STAINLESS
STEEL BOLTS. 2”NPT PORTS
SIMULAR TO THE INTEK VERSION PUMP BUT
DRIVEN BY THE COMMERCIAL RATED GX SERIES
HONDA ENGINE
THIS “PROTEK” SERIES PUMP HAS SAME
COMPONENTS AS THE “S” SERIES UNITS
WITH THE ADDED FEATURE OF ENGINE
PROTECTION BY SEPERATING THE ENGINE
COMPLETELY FROM THE PUMP IN CASE OF
SEAL FAILURE. 2" NPT PORTS.
“S” SERIES PEDESTAL TRANSFER
PUMPS FOR COUPLING TO YOUR
OWN POWER SOURCE. 2” PORTS.
“S” SERIES BRIGGS INTEK 6 HP DRIVEN TRANSFER
PUMP . 3” NPT PORTS
INLINE STRAINER
PUMP REPAIR KIT
PROTECT PUMP FROM DAMAGE BY
UNWANTED DEBRIS SUCKED INTO THE
PUMP. 2” FPT INLET.
KIT INCLUDES SHAFT SEAL, ENGINE
SEAL, O-RINGS, AND TUBE OF LOCTITE.
WORKS ON MANY BRANDS OF POLY
TRANSFER PUMPS.
PORTS
PART NO.
NPT
SE2EL PE
2”
SEB2PL E4C
2”
SEB2UL E5IC
2”
SE2UL E5HCP
2”
SE3SL E6C
3”
SE2RL E5ICPROTK** 2”
P-58-0074
P-58-0733
ENGINE
PEDESTAL PUMP
4 HP BRIGGS INTEK
5.5 HP BRIGGS INTEK
5.5 HP HONDA
6 HP BRIGGS INTEK
5.5 HP BRIGGS INTEK
REPAIR KIT
STRAINER
MAX
GPM
150
150
195
195
280
195
WT
40
40
46
48
50
46
LIST
$ 260.00
376.00
466.00
820.00
548.00
577.00
40.00
7.20
CATALOG
PRICE
$ 189.00
257.00
310.00
530.00
410.00
375.00
31.00
6.00
** WITH ENGINE PROTECTION

TRANSFER PUMP
HYPRO POWER PRO® GAS ENGINE DRIVEN TRANSFER PUMP, SELF PRIMING. PUMP
IS CONSTRUCTED OF A GLASS-FILLED POLYPROPYLENE BODY, EPDM SEALS, AND
STAINLESS STEEL BOLTS.
PART NO.
1542P-65SP
www.sprayland.com
PORTS
NPT
2”
ENGINE
6.5 HP
MAX
GPM
200
WT
48
PAGE 25
LIST
$ 565.00
CATALOG
PRICE
$ 305.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
12 VOLT PUMPS
DIAPHRAGM PUMPS
FEATURES:
» PUMP CAN RUN DRY WITHOUT DAMAGE
» BALL BEARING CAM DRIVE
» SELF PRIMING
» VITON DIAPHRAGM AND CHECK VALVE
» PERMANENT MAGNET CONTINUOUS DUTY MOTOR
» MAX. TEMP 160º
D2131F1311A & D21X007A
DUPLEX II DIAPHRAGM PUMPS
WITH INTERNAL BYPASS
D21X005A
DUPLEX II DIAPHRAGM PUMP
WITH DEMAND SWITCH
» DEMAND SWITCH MODELS OPERATE ONLY WHEN FLUID IS NEEDED. MOTOR
STOPS INSTANTLY WHEN DISCHARGE IS SHUT OFF
» INTERNAL RELIEF MODELS BYPASS INTERNALLY AND RUN CONTINUOUSLY
UNTIL MOTOR IS TURNED OFF.
PART NO.
D21X005A
D2131F1311A
D21X007A
4300-142A
4300-143A
4300-042A
4300-142A, -143A, -042A
QUAD-PLEX DIAPHRAGM PUMP
WITH DEMAND SWITCH
MAX
PRESSURE
60 PSI
50 PSI
50 PSI
45 PSI
45 PSI
45 PSI
TYPE
DEMAND
RELIEF
RELIEF
DEMAND
DEMAND
DEMAND
VOLTS
12 VDC
12 VDC
12 VDC
12 VDC
12 VDC
110 VAC
MAX
FLOW
2.2 GPM
1.6 GPM
2.2 GPM
3.7 GPM
4.9 GPM
3.8 GPM
WT
5
5
5
6
6
6
CATALOG
LIST
PRICE
$ 155.77 $ 122.00
142.56
115.00
153.62
120.00
173.03
146.00
180.84
153.00
196.28
171.00
12 VOLT SPEED CONTROLER
USED FOR CONTROLLING SPRAYING PRESSURE ON SMALLER DIAPHRAGM PUMPS
FROM REMOTE LOCATION SUCH AS A TRACTOR CAB BY CONTROLLING THE SPEED
OF THE PUMP MOTOR. 15 AMP MAX.
PART NO.
SP12
WT
5
CATALOG
PRICE
$ 199.00
LIST
$ 281.00
12 VOLT HIGH FLOW DIAPHRAGM PUMP
5 DIAPHRAGM PUMP, , NYLON HOUSING, SANTOPREME DIAPHRAGM, VITON
VALVES, 12 VOLT MOTOR, 70 PSI, 7.0 GPM, 140°F, 19 AMP MAX. ½” FPT PORTS.
PART NO.
7870-111E-SB
WT
8
LIST
$ 256.00
CATALOG
PRICE
$ 188.00
12 VOLT CENTRIFUGAL PUMPS
CENTRIFUGAL TRANSFER PUMP CLOSE-COUPLED TO A 12 VOLT DC ELECTRIC
MOTOR. 19 GPM, 7 PSI, 11 AMPS MAX CAPACITIES. 3/4” NPT PORTS.
PART NO.
9700B
9700S
www.sprayland.com
PUMP MATERIAL
BRONZE
STAINLESS
PAGE 26
LIST
$ 327.00
415.00
CATALOG
PRICE
$ 210.00
$ 270.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PREMIUM QUALITY TANKS
* RATED TO 1.7 SPECIFIC GRAVITY
* UV INHIBITORS FOR LONGER LIFE
* 3 YEAR WARRANTY!
POLYETHYLENE TANKS
SPRAYER TANKS
SIZE
PART NO. (GAL)
0110
110
0152
150
0208
200
0308
300
0508
500
0300
300
0500
500
0755
750
1000 1000
DESCRIPTION
ROUND TANK
ROUND TANK
ROUND TANK
ROUND TANK
ROUND TANK
ELIPTICAL TANK
ELIPTICAL TANK
ELIPTICAL TANK
ELIPTICAL TANK
DIMENSIONS
30" DIA. x 44"
32" DIA. x 54"
38" DIA. x 52"
38" DIA. x 73"
48" DIA. x 74"
30" H x 48" W
36" H x 57" W
42" H x 69" W
49" H x 78" W
L
L
L
L
L
x
x
x
x
66"L
82" L
89" L
90" L
OUTLETS
(FEMALE NPT)
1 ¼" & ¾
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
1 ¼" & ¾"
WT.
36
45
56
82
118
114
163
220
285
LIST
PRICE
$ 280.00
333.00
391.00
512.00
555.00
680.00
622.00
761.00
1052.00
CATALOG
PRICE
$ 215.00
258.00
304.00
404.00
457.00
528.00
567.00
683.00
865.00
(SEE PAGE 29 FOR TANK SADDLES)
HORIZONTAL LEG TANKS
PART NO.
0026-16
0065-24
0125-32
0225-38
0335-44
0535-48
0735-48W*
0925-DS*
0925-DW*
1065-58W*
1065-58S*
1800-2W*‡
1800-2S*‡
2600-2W*‡
2600-2S*‡
SIZE
(GAL)
25
65
125
225
335
535
735
925
925
1065
1065
1800
1800
2600
2600
DESCRIPTION
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
LEG TANK- ROUND
* HOOPS REQUIRED ‡ 2 TANKS COUPLED TOGETHER
DIMENSIONS
16" DIA. x 30" L
24" DIA. x 38" L
32" DIA. x 40" L
38" DIA. x 52" L
44" DIA. x 56" L
48" DIA. x 78" L
48" DIA. x 99" L
62" DIA. x 76" L
62" DIA. x 76" L
58" DIA. x 106" L
58" DIA. x 106" L
62" DIA. x 140" L
62" DIA. x 140" L
62" DIA. x 212" L
62" DIA. x 212" L
OUTLETS
(FEMALE NPT)
¾"
1"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
FITS TANK
735
1065
925
1800
2600
LIST
PRICE
$ 110.00
219.00
364.00
456.00
570.00
643.00
827.00
925.00
925.00
1273.00
1273.00
2040.00
2040.00
2963.00
2963.00
CATALOG
PRICE
$ 89.00
170.00
291.00
336.00
440.00
535.00
725.00
827.00
827.00
1010.00
1010.00
1850.00
1850.00
2250.00
2250.00
W=WITHOUT SUMP S= SUMP
HOOPS FOR LEG TANKS
PART NO.
FS048-HP
FS058-HP
FS062-HP-925
FS062-HP-1800
FS062-HP-2600
WT.
13
34
70
85
106
150
245
290
290
340
340
580
580
850
850
LIST
PRICE
$ 246.00
303.00
235.00
477.00
681.00
DESCRIPTION
1 SET=(3) 1/½" DIA. PIPES
1 SET=(3) 1/½" DIA. PIPES
1 SET=(2) 1/½" DIA. PIPES
1 SET=(4) 1/½" DIA. PIPES
1 SET=(6) 1/½" DIA. PIPES
CATALOG
PRICE
$ 210.00
278.00
195.00
365.00
505.00
VERTICAL BULK STORAGE TANKS
PART NO.
VT0040-18
VT0065-23
VT0100-28
VT0175-31
VT0210-40
VT0550-52
VT1050-85
VT1500-64
VT1650-85
VT2000-90
VT2500-90
VT3000-90
VT4000-96
VT5150-102
VT6250-102
SIZE
(GAL)
40
65
100
175
210
550
1050
1500
1650
2000
2500
3000
4000
5150
6250
www.sprayland.com
DESCRIPTION
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
STORAGE TANK
DIMENSIONS
18" DIA. x 41" H
23" DIA. x 42" H
32" DIA. x 36" H
31" DIA. x 52" H
40" DIA. x 48" H
52" DIA. x 66" H
85" DIA. x 52" H
64" DIA. x 115" H
85" DIA. x 64" H
90" DIA. x 81" H
90" DIA. x 100" H
90" DIA. x 118" H
96" DIA. x 142" H
102" DIA. x 159" H
102" DIA. x 191" H
OUTLETS
(FEMALE NPT)
OPT
OPT
OPT
OPT
OPT
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
PAGE 27
WT.
17
25
36
48
55
101
171
250
301
375
501
550
850
1350
1550
LIST
PRICE
$ 113.00
122.00
198.00
286.00
425.00
589.00
771.00
983.00
1279.00
1638.00
1437.00
1989.00
2630.00
4764.00
5025.00
CATALOG
PRICE
$ 96.00
110.00
175.00
239.00
342.00
513.00
687.00
930.00
970.00
1232.00
1324.00
1596.00
2145.00
3330.00
4192.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
POLYETHYLENE TANKS
PICK UP TANKS
LOW PROFILE
PART NO.
PU0305-60
SIZE
(GAL)
305
DESCRIPTION
PICK UP TANK
DIMENSIONS
30”H x 58” W x 60" L
OUTLETS
(FEMALE NPT)
2"
WT.
97
LIST
PRICE
$ 592.00
CATALOG
PRICE
$ 403.00
DIMENSIONS
52" DIA. x 30" H
62" DIA. x 34" H
62" DIA. x 41" H
OUTLETS
(FEMALE NPT)
2"
2"
2"
WT.
54
92
102
LIST
PRICE
$ 298.00
463.00
496.00
CATALOG
PRICE
$257.00
397.00
445.00
LIST
PRICE
$ 193.00
283.00
337.00
411.00
813.00
CATALOG
PRICE
$ 150.00
237.00
280.00
344.00
734.00
STANDARD PROFILE
PART NO.
0200-52
0350-62
0450-62
SIZE
(GAL)
200
350
450
DESCRIPTION
PICK UP TANK
PICK UP TANK
PICK UP TANK
PCO RECTANGULAR TANKS
PART NO.
PCO50
PCO100
PCO150
PCO200
PCO300
SIZE
(GAL)
50
100
150
200
300
DESCRIPTION
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
DIMENSIONS
20" H x 19" W
26" H x 30" W
26" H x 36" W
35" H x 36" W
37" H x 40" W
x
x
x
x
x
38"L
38" L
48" L
48" L
69" L
OUTLETS
(FEMALE NPT)
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
WT.
25
42
62
80
80
FOR PCO TANKS WITH SUMPS, ADD SUFFIX LETTER “S” TO PART NUMBER.
RECTANGULAR TANKS
*WITH SUMP
PART NO.
0003
0006
0012
0020*
0035
0045
SIZE
(GAL)
3
6
12
20
35
45
DESCRIPTION
RINSE TANK (RECT)
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
RECTANGULAR TANK
DIMENSIONS
7"W x 14" H x 12" L
8" H x 12" W x 15"L
12" H x 14" W x 18" L
11" H x 13" W x 31" L
20" H x 18" W x 28" L
18" H x 18" W x 37" L
OUTLETS
(FEMALE NPT)
¾
OPTIONAL
¾"
¾"
¾"
OPTIONAL
WT.
5
5
7
12
14
15
LIST
PRICE
$ 52.00
67.00
95.00
104.00
125.00
155.00
CATALOG
PRICE
$ 40.00
53.00
71.00
82.00
98.00
120.00
CHEM MIX TANKS (CONE BOTTOM)
PART NO.
0015
0030
0060
SIZE
(GAL)
15
30
60
DESCRIPTION
CONE TANK
CONE TANK
CONE TANK
DIMENSIONS
19" DIA. x 21" H
24" DIA. x 26" H
24" DIA. x 39" H
OUTLETS
(FEMALE NPT)
2"
2"
2"
WT.
13
15
23
LIST
PRICE
$110.00
139.00
187.00
CATALOG
PRICE
$ 83.00
108.00
142.00
BLOW MOLDED SPOT SPRAYER TANKS WITH MOLDED IN DRAIN
PART NO.
0014
0027
0060S
SIZE
(GAL)
15
25
60
DESCRIPTION
SPOT TANK
SPOT TANK
SPOT TANK
DIMENSIONS
14" H x 14" W x 31" L
18" H x 16" W x 34" L
26" H x 24" W x 36" L
OUTLETS
(FEMALE NPT)
OPTIONAL
OPTIONAL
OPTIONAL
WT.
8
13
21
LIST
PRICE
$ 56.00
71.00
155.00
CATALOG
PRICE
$ 47.00
54.00
110.00
OTHER TANK SIZES AND CONFIGURATIONS ARE AVAILABLE THAT ARE NOT SHOWN IN
THIS CATALOG. DUE TO VOLATILE PETROLEUM PRICES WHICH AFFECTS THE
MANUFACTURING PROCESS, TANK PRICES MAY CHANGE WITHOUT NOTICE. CALL
SPRAY-LAND FOR PRICING AND AVAILABILITY.
www.sprayland.com
PAGE 28
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PARTS & ACCESSORIES FOR TANKS
TANK LIDS
PART NO.
37426
5052R
5082R
10631
10522
10525
10527
10528
10529
10530
TANK MFG.
RAVEN
RAVEN
RAVEN
ACE ROTO
ACE ROTO
ACE ROTO
ACE ROTO
NORWESCO/ACE
NORWESCO/ACE
ACE ROTO
SIZE/TYPE
10" SCREW-ON
5" ¼-TURN
10" ¼-TURN
2" SPIN ON CAP
5" SCREW-ON
8" SCREW-ON
12" SCREW-ON
16" SCREW-ON w/ 4" CAP
4" CAP FOR 16" LID
22" LID
LIST
PRICE
52.00
31.31
39.50
6.79
9.83
21.48
25.64
35.10
10.30
87.55
DROP IN STRAINER BASKETS
PART NO.
10535
10536
10537
DESCRIPTION
STRAINER BASKET
STRAINER BASKET
STRAINER BASKET
FITS TANK LID
8”
12”
16”
LIST
PRICE
$ 42.80
$ 44.50
48.25
CATALOG
PRICE
$ 34.50
28.80
36.50
HOLE REQ'D
1 ½"
1 ½"
2¼"
3"
3"
4 ¼"
5 ½"
N/A
LIST
PRICE
$ 9.45
$ 10.50
12.60
16.12
17.36
73.00
94.75
20.45
CATALOG
PRICE
$ 6.50
8.50
10.50
13.50
15.00
54.00
69.50
17.05
TANK FITTINGS-POLY TANKS
DOUBLE THREADED FITTING
PART NO.
BH20-003
BH20-004
BH20-006
BH20-007
BH20-008
BH20-010
BH20-015
VC200
ANTIVORTEX FITTING
NPT SIZE/TYPE
¾" DOUBLE THREADED
1" DOUBLE THREADED
1 ¼" DOUBLE THREADED
1 ½" DOUBLE THREADED
2" DOUBLE THREADED
3" THREADED
4" THREADED
2” NPT TANK VENT
CATALOG
PRICE
40.00
25.05
31.60
5.15
8.00
18.50
20.50
33.15
9.90
71.00
TANK VENT
TANK ACCESSORIES
TANK RINSING
NOZZLE
TANK CLEANER/CHEMICAL
NEUTRALIZER
PART NO.
3371
3371-0019
3371AT
510120
8550TF
5173001
DESCRIPTION
JET AGITATOR ½" FPT x ¾" MPT
JET AGITATOR ¾" MPT
TEE JET AGITATOR ASSEMBLY ¾" MPT
TANK RINSING NOZZLE
FLOAT VALVE FILL KIT-1800 GPH
NUTRA-SOL TANK CLEANER 32 oz. CAN
FLOAT VALVE
LIST
PRICE
$ 5.50
4.77
14.35
145.00
52.00
12.44
CATALOG
PRICE
4.15
3.30
10.75
116.00
46.75
9.95
3371 AGITATOR
3371-0019 AGITATOR
TANK SADDLES
PART NO.
0110-30R
0150-32R
0200-38R
0300-38R
48-500SB
0300E
0500E
FITS TANK SIZE
110 GALLON (30"DIA)
150 GALLON (32" DIA)
200 GALLON (38" DIA)
300 GALLON (38" DIA)
500 GALLON (48" DIA)
300 GALLON ELLIPTICAL
500 GALLON ELLIPTICAL
TANK HOLD-DOWN COMPONENTS
PART NO.
5133207
5133220
5108041
5108112
5034111
www.sprayland.com
DESCRIPTION
2” NYLON STRAP (PER FOOT)
3” NYLON STRAP (PER FOOT)
2” STRAP BUCKLE
3” STRAP BUCKLE
HOLD DOWN "J" BOLT
LIST
PRICE
$ 217.00
277.00
310.00
454.00
476.00
411.00
757.00
WT.
36
54
57
138
138
100
200
LIST
PRICE
$ 2.30
3.95
3.85
7.10
3.95
CATALOG
PRICE
$ 174.00
194.00
248.00
378.00
400.00
319.00
622.00
CATALOG
PRICE
$ 1.85
2.60
3.10
5.75
3.20
PAGE 29
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
LINE STRAINERS
POLYPROPYLENE LINE STRAINERS
POLYPROPYLENE BODY, 50 MESH STAINLESS STEEL SCREEN, AND BUNA-N GASKET ARE STANDARD ON
THESE STRAINERS. 20, 80 MESH SCREENS AND VITON GASKETS AVAILABLE. 80 PSI MAX.
PART NO.
3350-0082A
3350-0046A
3350-0034A
3350-0058A
3350-0072A
3350-0113A
CATALOG
PRICE
$ 7.45
11.25
12.20
16.90
18.75
20.05
HYPRO
LIST
$ 9.95
15.00
16.25
22.50
25.00
26.75
NPT SIZE
¼" I.D. & ½" O.D.
½"
¾"
1"
1 ¼"
1 ½"
COMPACT POLYPROPYLENE LINE STRAINERS
POLYPROPYLENE HEAD AND BOWL, 50 MESH STAINLESS STEEL SCREEN, AND EPDM GASKET.
DURABLE, COMPACT DESIGN. OTHER MESH SCREENS AND VITON GASKETS AVAILABLE. 150 PSI
MAX.
PART NO.
AA122-1/2-PP-50
AA122-3/4-PP-50
CATALOG
PRICE
$ 13.20
13.20
S.S.
LIST
$ 18.86
18.86
NPT SIZE
½"
¾"
20, 80, AND 100 MESH
SCREENS, AND VITON
GASKETS AVAILABLE FOR
THESE STRAINERS
POLYPROPYLENE LINE STRAINERS
POLYPROPYLENE HEAD AND BOWL, 50 MESH STAINLESS STEEL SCREEN, AND
EPDM GASKET. BOTTOM FLUSH OUT. 200 PSI MAX.
PART NO.
AA126ML-3-50
AA126ML-4-50
AA126ML-5-50
AA126ML-6-50
AA126ML-F50-50
AA126ML-F75-50
SIZE
¾" NPT
1" NPT
1 ¼" NPT
1 ½" NPT
50 SERIES FLANGE
75 SERIES FLANGE
TEEJET
LIST
$ 34.85
34.85
71.36
71.36
34.85
71.36
CATALOG
PRICE
$ 24.40
24.40
49.95
49.95
24.40
49.95
20, 80, AND 100 MESH
SCREENS, AND VITON
GASKETS AVAILABLE
FOR THESE
STRAINERS
AA126ML-3,4,5,6
AA126ML-F50,F75
SELF-CLEANING STRAINERS
THE TEEJET® SELF-CLEANING STRAINER IS DESIGNED TO MINIMIZE SCREEN CLOGGING BY
FLUSHING EXCESS PARTICLES BACK TO THE TANK. MOUNTS ON THE DISCHARGE SIDE OF THE
PUMP. REQUIRES 6 GPM FOR ¾" AND 1" STRAINERS, AND 8 GPM FOR 1 ¼" AND 1 ½" STRAINERS FOR
CONTINUOUS WASHDOWN TO OCCUR. POLY BODY, STAINLESS STEEL SCREEN. 200 PSI MAX.
TEEJET
CATALOG
PART NO.
SIZE
WT.
LIST
PRICE
AA126MLSC-3-50
¾" NPT
1
$ 53.89
$ 37.75
AA126MLSC-4-50
1" NPT
1
53.89
37.75
AA126MLSC-5-50
1 ¼" NPT
2
90.41
63.25
AA126MLSC-6-50
1 ½" NPT
2
90.41
63.25
AA126MLSC-F50-50
50 SERIES FLANGE
2
53.89
37.75
AA126MLSC-F75-50
75 SERIES FLANGE
2
90.41
63.75
NPT PORTS
FLANGE PORTS
"Y" STRAINERS
LIGHTWEIGHT, GLASS-FILLED POLYPROPYLENE BODY AND CAP. REINFORCED STAINLESS STEEL
SCREEN, EPDM GASKET.
PART NO.
LSY150-20
LSY200-20
300A-12
www.sprayland.com
MESH
20
20
12
PAGE 30
NPT SIZE
1 ½"
2"
3”
WT.
3
3
9
LIST
PRICE
$ 74.74
74.74
436.97
CATALOG
PRICE
$ 53.50
53.50
304.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
VALVES
BOLTED BALL VALVES
BRASS BALL VALVES
GLASS FILLED POLYPROPYLENE CONSTRUCTION FOR STRENGTH
AND EXCELLENT CHEMICAL RESISTANCE. SELF-ALIGNING BALL,
REBUILDABLE. 125 PSI MAX.
STANDARD
PORT
FULL PORT
PART NO.
4011B
4011C
4011X
4011D
4011E
4011N
4011F
4011Z
7012A
NPT SIZE
¾"
1"
1 ¼"
1 ½"
2"
2" FULL PORT
3"
3" FULL PORT
4"
CATALOG
PRICE
$ 28.40
28.40
39.40
39.40
37.55
56.75
79.75
137.50
315.00
LIST
PRICE
$ 35.90
35.90
49.77
49.77
47.40
71.70
100.70
173.85
398.00
GLASS FILLED POLYPROPYLENE CONSTRUCTION. FULL PORT
DESIGN, TEFLON SEATS, VITON O-RINGS. EXCELLENT
CHEMICAL RESISTANCE, REBUILDABLE. 150 PSI MAX.
NPT SIZE
½"
¾"
1"
1 ¼"
1 ½"
2"
CATALOG
PRICE
$ 12.65
12.65
15.75
26.50
26.50
37.40
LIST
PRICE
$ 19.60
19.60
24.25
39.00
39.00
57.50
DESIGNED TO DIRECT FLOW FROM TWO SOURCES. SAME
SPECIFICATIONS AS THE UNION VALVE SHOWN ABOVE.
NPT SIZE
½"
¾"
1"
1 ¼"
1 ½"
2"
NPT SIZE
1/4"
3/8"
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
CATALOG
PRICE
$ 7.05
7.05
8.50
11.80
18.40
27.05
40.15
62.75
LIST
PRICE
$ 8.90
8.90
10.75
17.73
27.51
40.62
60.21
94.17
STAINLESS STEEL BALL VALVES
PART NO.
949-101
949-102
949-103
949-104
949-105
949-106
949-107
949-108
NPT SIZE
1/4"
3/8"
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
CATALOG
PRICE
$ 26.55
26.90
29.90
36.50
44.85
78.90
79.85
113.65
LIST
PRICE
$ 31.86
32.31
35.91
43.83
53.82
94.68
95.85
136.41
3-WAY BRASS BALL VALVES
3-WAY UNION BALL VALVES
PART NO.
454232N
454233N
454234N
454235N
454236N
454237N
PART NO.
171N-14
171N-38
171N-12
171N-34
171N-100
171N-114
171N-112
171N-200
316 STAINLESS STEEL BODY, BALL AND STEM. FULL PORT DESIGN, TEFLON
SEATS. 1000 PSI MAX.
UNION BALL VALVES
PART NO.
454132N
454133N
454134N
454135N
454136N
454137N
BRASS BODY, STAINLESS STEEL BALL, TEFLON SEATS, AND
RUBBER COATED HANDLE. 600 PSI, 245º F MAX
CATALOG
PRICE
$ 23.25
23.25
28.90
36.40
38.10
46.75
LIST
PRICE
$ 35.85
35.85
44.45
56.00
58.65
72.00
PVC GATE VALVES
DESIGNED TO DIRECT FLOW FROM TWO
SOURCES. BRASS BODY, STAINLESS STEEL BALL,
RUBBER COATED HANDLE. 600 PSI MAX.
PART NO.
940-461
940-462
NPT SIZE
1/2"
3/4"
CATALOG
PRICE
$ 26.10
42.35
LIST
PRICE
$ 39.12
59.57
HIGH PRESSURE BALL VALVES
CARBON STEEL BALL
VALVES FOR USE WITH
HIGHER PRESSURE
APPLICATIONS.
949GE2-
150 PSI MAX.
LIMITED TO STOCK ON HAND
PART NO.
CGV12
CGV34
CGV100
CGV114
CGV112
CGV200
NPT SIZE
½"
¾"
1"
1 ¼"
1 ½"
2"
CATALOG
PRICE
$ 7.00
8.50
11.25
15.95
19.95
27.25
LIST
PRICE
$12.60
15.60
19.80
27.53
34.73
41.70
PART NO. NPT SIZE
949-121
1/4"
949-122
3/8"
949-123
1/2"
949-124
3/4"
GE2-14-NPT 1/4”
GE2-38-NPT 3/8”
www.sprayland.com
CATALOG
PRICE
$ 48.30
51.20
49.25
55.35
49.85
48.75
CHROME PLATED BALL VALVES
LIGHTWEIGHT DURABLE VALVE WITH GOOD CHEMICAL
RESISTANCE. 150 PSI MAX.
NPT SIZE
1/2"
3/4"
LIST
PRICE
$ 72.48
61.44
59.25
66.45
59.82
58.53
CHROMED BRASS BODY, BALL AND STEM,
TEFLON SEATS, BUTTERFLY HANDLE. 300 PSI, 200º F
MAX RATINGS.
PVC BALL VALVE
PART NO.
PVC050
PVC075
MAX.
PSI
2000
2000
2000
2000
7250
7250
LIST
PRICE
$ 4.62
5.40
CATALOG
PRICE
$ 3.85
4.50
PAGE 31
PART NO.
90FFB14
90FFB38
90FFB12
NPT SIZE
1/4"
3/8"
1/2"
LIST
PRICE
$ 9.20
9.20
15.47
CATALOG
PRICE
$ 7.85
7.85
12.95
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
CAMLOCK COUPLERS
INTERCHANGEABLE WITH MOST BRANDS OF CAM LEVER COUPLERS. THESE COUPLINGS ARE MADE OF GLASS-FILLED
POLYPROPYLENE WITH 304 STAINLESS STEEL LEVERS AND PINS FOR STRENGTH AND EXCELLENT CORROSION
RESISTANCE. STAINLESS STEEL CAMLOCKS ARE AVAILABLE BY SPECIAL ORDER. CALL FOR PRICING AND AVAILABILITY.
HOSE SHANK ADAPTER
FEMALE THREAD ADAPTER
PART NO.
050A
075A
100A
125A
150A
200A
300A
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 4.77
4.82
4.94
5.25
6.05
6.98
17.36
CATALOG
PRICE
$ 3.95
4.00
4.10
4.35
5.05
5.80
14.65
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 5.25
5.31
6.10
6.18
6.36
8.03
22.13
CATALOG
PRICE
$ 4.40
4.45
5.10
5.15
5.30
6.70
18.45
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 11.56
11.56
13.41
13.53
15.85
19.71
33.70
PART NO.
050D
075D
100D
125D
150D
200D
300D
CATALOG
PRICE
$ 9.65
9.65
10.90
11.20
12.80
16.40
27.05
CATALOG
PRICE
$ 4.40
4.45
5.10
5.15
5.30
6.70
18.45
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 11.56
11.56
13.41
13.53
15.85
19.71
33.70
CATALOG
PRICE
$ 9.65
9.65
10.90
11.20
12.80
16.40
27.05
PART NO.
050B
075B
100B
125B
150B
200B
300B
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 11.56
11.56
13.41
13.53
15.85
19.71
33.70
CATALOG
PRICE
$ 9.65
9.65
10.90
11.20
12.80
16.40
27.05
DUST PLUG
DUST CAP
PART NO.
050DC
075DC
100DC
125DC
150DC
200DC
300DC
FITS SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ 11.22
11.22
12.72
13.02
14.94
18.06
31.59
CATALOG
PRICE
$ 9.35
9.35
10.60
10.85
12.45
15.65
26.25
LIST
PART NO.
TYPE
PRICE
200A-90 2” FPT ADAPTER $ 10.93
200B-90 2” MPT COUPLER 23.11
200C-90 2” BARB COUPLER 23.11
200D-90 2” FPT COUPLER
23.11
200E-90 2” BARB ADAPTER 10.93
200F-90 2” MPT ADAPTER 10.93
PART NO.
050DP
075DP
100DP
125DP
150DP
200DP
300DP
LIST
PRICE
$ 4.88
4.94
5.25
5.42
5.68
7.91
17.42
FITS SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
CATALOG
PRICE
$ 4.05
4.15
4.35
4.55
4.75
6.60
14.50
REPLACEMENT COUPLER GASKETS- EPDM
90° ADAPTERS AND COUPLERS
www.sprayland.com
LIST
PRICE
$ 5.25
5.31
6.10
6.18
6.36
8.03
22.13
MALE THREAD COUPLER
HOSE SHANK COUPLER
PART NO.
050C
075C
100C
125C
150C
200C
300C
NPT SIZE
1/2"
3/4"
1"
1 ¼"
1 ½"
2"
3"
FEMALE THREAD COUPLER
MALE THREAD ADAPTER
PART NO.
050F
075F
100F
125F
150F
200F
300F
PART NO.
050E
075E
100E
125E
150E
200E
300E
CATALOG
PRICE
$ 8.85
18.70
18.70
18.70
9.05
9.05
PAGE 32
PART NO.
24060
24160
24260
24360
24460
24560
24760
FITS
COUPLER
1/2”
3/4"
1"
1 ¼"
1 ½"
2"
3"
LIST
PRICE
$ .60
.63
.66
.90
.96
1.08
1.32
CATALOG
PRICE
$ .50
.50
.55
.75
.80
.90
1.10
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
HOSE
CLEAR VINYL TUBING
EPDM SPRAYER HOSE
BLACK RUBBER HOSE WITH REINFORCED NYLON BRAID. EXCELLENT CHEMICAL
RESISTANCE. 200 PSI, 195ºF MAX RATINGS. NOT RATED FOR USE WITH PETROLEUM
PRODUCTS.
PART NO.
10031620
10031630
10031640
10031650
10031660
10040507
I.D.
SIZE
3/8"
1/2"
5/8"
3/4"
1"
1 ¼"
ROLL
SIZE
500’
500’
500’
500’
500’
400’
*DISCOUNTS ON FULL ROLLS!
LIST
PRICE/FT.
$ .65
.80
1.10
1.30
2.20
4.60
CATALOG
ROLL*
PRICE/FT.
PRICE
$ . 55
$ 225.00
.65
275.00
.95
380.00
1.10
435.00
1.75
705.00
3.50
1096.00
EPDM SPIRAL SUCTION/FERTILIZER HOSE
USED FOR SIGHT GAUGE TUBING, RV WATER LINES, AND FOAM MARKERS. 50 PSI,
150ºF MAX. FDA RATED FOOD GRADE USE.
I.D.
HOSE WALL
SIZE BY THICKNESS
1/8"
x
1/32"
1/8"
x
1/16"
3/16" x
1/16"
1/4"
x
1/32"
5/16" x
1/8"
3/8"
x
1/8"
1/2"
x
1/8"
5/8"
x
1/8"
3/4"
x
1/8"
1"
x
1/8"
PART NO.
15009200
15002018
15002506
15003006
15005120
15005505
15006005
15006501
15007008
15008008
BRAIDED VINYL TUBING
EPDM RUBBER HOSE WITH POLY SPIRAL REINFORCEMENT TO PREVENT COLLAPSING.
150 PSI MAX.
PART NO.
12012797
12012800
12012805
12012810
I.D.
SIZE
1 ¼"
1 ½"
2"
3"
ROLL
SIZE
100’
100’
100’
100’
LIST
PRICE/FT.
$ 3.09
3.27
4.80
8.25
CATALOG
PRICE/FT.
$ 2.20
2.45
3.35
6.85
ROLL*
PRICE
$ 176.00
196.00
285.00
550.00
COLLAPSIBLE DISCHARGE HOSE
PART NO.
13030014
13030022
13030049
ROLL
SIZE
100’
100’
100’
LIST
PRICE/FT.
$ 1.65
2.40
3.40
I.D.
SIZE
¼”
½"
ROLL
SIZE
100’
100’
CATALOG
PRICE/FT.
$ 1.35
2.00
2.60
ROLL*
PRICE
$ 108.00
160.00
208.00
PART NO.
15009275
15018882
15009285
15009290
O.D.
SIZE
1/4"
1/4"
3/8"
1/2"
HOSE
COLOR
WHITE
BLACK
WHITE
WHITE
PART NO.
15010002
15010006
15010017
ROLL*
PRICE
$ 26.00
64.00
LIST
PRICE/FT.
$ .33
.33
.53
.50
CATALOG
PRICE/FT.
$ .30
.30
.45
.40
PRESSURE GAUGE TUBING
TUBING FOR READING PRESSURE FROM CAB
SPRAYER CONTROLS.
NYLON REINFORCED PVC HOSE USED BY COMMERCIAL LAWN CARE AND PEST
CONTROL COMPANIES. DURABLE, FLEXIBLE AND GOOD CHEMICAL RESISTANCE.
ROLL
SIZE
300’
300’
300’
CATALOG
PRICE/FT.
$ .30
.80
LIST
PRICE/FT.
$ .38
.97
MEASURED O.D. AND REQUIRES THE USE OF
SPECIAL TUBE FITTINGS (SEE PAGE 37).
PVC SPRAYER HOSE
I.D.
SIZE
3/8"
1/2"
1/2"
THIS HOSE HAS THE SAME FEATURES AS
THE STANDARD VINYL TUBING WITH
ADDED NYLON REINFORCING WEBBING
FOR INCREASED WORKING PRESSURES.
150 °F, 250 PSI MAX.
POLYETHYLENE TUBING
COLLAPSIBLE FOR EASY STORAGE, REINFORCED
PVC CONSTRUCTION, 150 PSI MAX. PRESSURE.
I.D.
SIZE
1 1/2"
2"
3"
PART NO.
15011505
15013001
CATALOG
PRICE
$ .25
.30
.30
.35
.55
.60
.75
.95
1.10
1.55
LIST
PRICE/FT.
$ .30
.35
.35
.39
.63
.70
.93
1.12
1.35
1.89
MAX
PSI
600
600
800
LIST
PRICE/FT.
$ 1.01
1.30
1.67
CATALOG
PRICE/FT.
$ .80
1.00
1.40
ROLL*
PRICE
$ 195.00
243.00
336.00
PART NO.
0909
15009275
O.D.
SIZE
1/8"
1/4"
CATALOG
PRICE/FT.
$ .30
.30
LIST
PRICE/FT.
$ .40
.35
HOSE CUTTERS
EVA ANHYDROUS HOSE
A HANDY TOOL GREAT FOR CUTTING
HOSE AND TUBING. THIS SCISSOR TYPE
CUTTING DEVICE MAKES A STRAIGHT CUT
EVERY TIME. PLASTIC HANDLE AND
STAINLESS STEEL BLADE.
TRANSLUCENT HOSE USED TO APPLY ANHYDROUS AMMONIA AND LIQUID
FERTILIZERS. 1/8" WALL, 120 PSI MAX.
PART NO.
15016000
15017007
I.D.
SIZE
3/8"
1/2"
www.sprayland.com
ROLL
SIZE
500’
500’
LIST
PRICE/FT.
$ .50
.66
CATALOG
PRICE/FT.
$ .45
.55
ROLL*
PRICE
$ 170.00
220.00
PAGE 33
PART NO.
5271981
5273224
5272022
5033005
DESCRIPTION
HOSE CUTTER-CUTS UP TO 1 ¼" HOSE
HOSE CUTTER-CUTS UP TO 2" HOSE
REPLACEMENT BLADE FOR SMALLER
REPLACEMENT BLADE FOR LARGER
LIST
PRICE
$ 23.00
26.45
9.90
10.50
CATALOG
PRICE
$ 18.50
22.95
8.50
9.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GARDEN HOSE & ACCESSORIES
CONTRACTOR GRADE GARDEN HOSES
HOSE BARB BY GARDEN HOSE THREAD
HEAVY DUTY BRAIDED VINYL HOSE IS STRONGER, MORE
FLEXIBLE, AND KINK REISITANT THAN STANDARD GARDEN
HOSES. STURDY CRIMPED-ON BRASS ENDS. CUSTOM
LENGTHS AVAILABLE. 250 PSI MAX.
PART NO
GH1225
GH1250
GH1275
GH100
LENGTH
25 FT.
50 FT.
75 FT.
100 FT.
PART NO.
D3438
D3412
D3458
D34
D3438B
D3412B
D3458B
D34B
CATALOG
PRICE
$ 29.00
45.50
62.00
78.50
LIST
PRICE
$ 36.25
56.88
77.50
98.15
GARDEN HOSE ADAPTERS
MALE PIPE BY MALE GHT-NYLON
PART NO
E3438
E3412
E34
DESCRIPTION
3/8" MPT BY MGHT
1/2" MPT BY MGHT
3/4" MPT BY MGHT
LIST
PRICE
$ .60
.60
.60
CATALOG
PRICE
$ .50
.50
.50
GARDEN HOSE THREAD CAP
CATALOG
PRICE
$ 1.70
1.65
BACKFLOW PREVENTOR
PART NO.
N34
FEMALE PIPE BY MALE GHT-NYLON
PART NO
G3412
G34
DESCRIPTION
1/2" FPT BY MGHT
3/4" FPT BY MGHT
LIST
PRICE
$ 2.05
2.00
DESCRIPTION
3/8" MPT BY MGHT
1/2" MPT BY MGHT
3/4" MPT BY MGHT
CATALOG
PRICE
$ 3.45
3.50
4.15
LIST
PRICE
$ 4.15
4.20
4.95
PART NO.
7200/8
DESCRIPTION
3/8" MPT x FGHT
1/2" MPT x FGHT
1/2" FPT x FGHT
RUBBER WASHER
RUBBER WASHER
PART NO
B35
B34
B33B
DESCRIPTION
3/4" NPT NUT-NYLON
3/4" GHT NUT-NYLON
3/4” GHT HEX NUT
LIST
PRICE
$ .70
.55
CATALOG
PRICE
$ .60
.45
$ 3.24
$ 2.70
PART NO.
QC34G
DESCRIPTION
3/8" BARB
1/2" BARB
5/8" BARB
3/4" BARB
3/8" BARB
1/2" BARB
5/8" BARB
3/4" BARB
www.sprayland.com
LIST
PRICE
$ .50
.50
.55
.45
4.70
2.65
3.65
3.80
CATALOG
PRICE
$ 11.50
CATALOG
PRICE
$ 6.50
LIST
PRICE
$ 7.90
GARDEN HOSE VALVES
CONSTRUCTED OF CYCOLAC PLASTIC, FEMALE
GARDEN HOSE INLET AND MALE GARDEN HOSE
OUTLET. NOT RECOMMENDED FOR COMMERCIAL
USE. 85 PSI MAX.
PART NO
LA3
SINGLE OUTLET
LA23
DOUBLE OUTLET
SWIVEL BARBS (FOR USE WITH SWIVEL NUTS)
PART NO.
C38
C12
C58
C34
C38B
C12B
C58B
C34B
LIST
PRICE
$ 14.51
QUICK RELEASE DESIGN, BRASS CONSTRUCTION,
GHT THREAD. 200 PSI MAX PRESSURE.
LIST
CATALOG
PRICE
PRICE
$ 5.69
$ 4.70
5.69
4.70
6.24
5.20
.15
.08
.90
.75
SWIVEL NUT
CATALOG
PRICE
$ .65
GARDEN HOSE QUICK DISCONNECT
BRASS GARDEN HOSE SWIVELS
PART NO
B33B-SA38
B33B-SA12
2404-0245
W406V
W160M
LIST
PRICE
$ .80
CATALOG
PRICE
$ .55
.55
.55
.55
3.90
3.50
3.85
3.80
PREVENTS THE REVERSE FLOW OF CONTAMINATED
WATER INTO THE FRESH WATER SUPPLY. EASILY
ATTACHES TO WATER HYDRANT. BRASS CONSTRUCTION,
FEMALE GARDEN HOSE THREAD INLET, MALE GARDEN
HOSE THREAD OUTLET, 125 PSI MAX PRESSURE.
MALE PIPE BY MALE GHT-BRASS
PART NO
E3438B
E3412B
E34B
LIST
PRICE
$ .65
.65
.65
.65
4.68
4.20
4.65
4.56
DESCRIPTION
3/8" BARB
1/2" BARB
5/8" BARB
3/4" BARB
3/8" BARB
1/2" BARB
5/8" BARB
3/4" BARB
CATALOG
PRICE
$ .45
.45
.50
.35
3.90
2.20
3.00
3.15
PAGE 34
LIST
PRICE
$ 3.90
6.75
CATALOG
PRICE
$ 3.25
5.60
FAUCET DRUM VALVE
INSTANT-ON "COFFEE POT" STYLE
POLYPROPYLENE VALVE. PUSH DOWN FOR
MOMENTARY OPEN OR PULL UP TO LOCK OPEN.
3/4” NPT INLET.
PART NO.
HFSM
LIST
PRICE
$ 9.25
CATALOG
PRICE
$ 7.25
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
HOSE FITTINGS
PART NO.
A1814
A1838
A14
A1438
A1412
A3814
A38
A3812
A3858
A1214
A1238
A12
A1258
A1234
A3438
A3412
A3458
A34
A34100
A10034
A100
A100114
A11434
A114100
A114
A114112
A112114
A112
A112200
A200112
A200
A300
A1814B
A1838B
A14B
A1438B
A1412B
A3814B
A38B
A3812B
A1214B
A1238B
A12B
A1258B
A1234B
A3438B
A3412B
A3458B
A34B
A34100B
NPT
1/8"
1/8"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1 ¼"
1 ¼"
1 ¼"
1 ¼"
1 ½"
1 ½"
1 ½"
2"
2"
3"
BY
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1/8"
3/8"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
LIST
BARB
PRICE
1/4"
$ .40
3/8"
.47
1/4"
.50
3/8"
.50
1/2"
.50
1/4"
.50
3/8"
.50
1/2"
.55
5/8"
.50
1/4"
.50
3/8"
.55
1/2"
.55
5/8"
.55
3/4"
.55
3/8"
.60
1/2"
.60
5/8"
.60
3/4"
.65
1"
.90
3/4"
.90
1"
1.00
1 ¼"
1.60
3/4"
1.75
1"
1.75
1 ¼"
1.90
1 ½"
2.00
1 ¼"
1.90
1 ½"
2.00
2"
6.75
1 ½"
5.60
2"
3.70
3" (SCH 80) 13.22
1/4"
3/8"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
1/4"
3/8"
1/2"
5/8"
3/4"
3/8"
1/2"
5/8"
3/4"
1"
$ 1.30
1.65
1.44
2.19
2.10
2.19
2.10
2.61
3.66
3.78
3.33
5.82
4.56
5.07
5.04
4.98
5.85
7.47
CATALOG
PRICE
$ .35
.40
.45
.45
.45
.45
.45
.50
.45
.45
.45
.45
.45
.45
.50
.50
.50
.55
.75
.75
.85
1.30
1.45
1.45
1.55
1.65
1.55
1.65
5.40
4.65
3.10
11.00
HOSE
BARB
BY
MALE
PIPE
THREAD
ELBOW
HOSE
BARB
BY MALE
PIPE
THREAD
HOSE
MENDER
$ 1.10
1.35
1.20
1.85
1.75
1.85
1.75
2.15
3.05
3.15
2.75
4.85
3.80
4.25
4.20
4.15
4.85
6.25
ELBOW
BARB
TO
BARB
ELBOW HOSE BARB BY FEMALE PIPE THREAD
PART NO.
EL3412F
EL34F
NPT BY BARB
3/4" x
1/2"
3/4" x
3/4"
LIST
PRICE
$ 2.45
2.50
CATALOG
PRICE
$ 2.00
2.05
TEE
BARB
TO
BARB
HOSE BARB “Y”
PART NO.
Y14
Y38
Y12
BARBS
1/4"
3/8"
1/2"
LIST
PRICE
$ 2.10
2.35
2.36
CATALOG
PRICE
$ 1.85
1.90
1.90
35
PART NO.
EL1814
EL1838
EL14
EL1438
EL1412
EL3814
EL38
EL3812
EL3858
EL1214
EL1238
EL12
EL1258
EL1234
EL3438
EL3412
EL3458
EL34
EL34100
EL10012
EL10034
EL100
EL11434
EL114100
EL114
EL114112
EL112
EL200
PART NO.
SHM14
SHM38
SHM12
SHM1214
SHM1238
SHM1258
SHM58
SHM34
SHM100
SHM114
SHM112
SHM200
PART NO.
EL38HB
EL12HB
EL58HB
EL34HB
EL100HB
EL114HB
EL112HB
EL200HB
NPT
1/8"
1/8"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1 ¼"
1 ¼"
1 ¼"
1 ¼"
1 ½"
2"
BY BARB
x 1/4"
x 3/8"
x 1/4"
x 3/8"
x 1/2"
x 1/4"
x 3/8"
x 1/2"
x 5/8"
x 1/4"
x 3/8"
x 1/2"
x 5/8"
x 3/4"
x 3/8"
x 1/2"
x 5/8"
x 3/4"
x
1"
x 1/2"
x 3/4"
x
1"
x 3/4"
x 1"
x 1 ¼"
x 1 ½"
x 1 ½"
x 2"
DESCRIPTION
1/4" BARB
3/8" BARB
1/2" BARB
1/2" TO 1/4"
1/2" TO 3/8"
1/2" TO 5/8"
5/8" BARB
3/4" BARB
1" BARB
1 ¼" BARB
1 ½" BARB
2" BARB
DESCRIPTION
3/8" BARB
1/2" BARB
5/8" BARB
3/4" BARB
1" BARB
1 ¼" BARB
1 ½" BARB
2" BARB
PART NO.
DESCRIPTION
T14
1/4" BARB
T38
3/8" BARB
T3812
1/2" x 1/2" x 3/8" BARB
T12
1/2" BARB
T58
5/8" BARB
T34
3/4" BARB
T100
1" BARB
T114
1 ¼" BARB
T112
1 ½" BARB
T200
2" BARB
LIST
PRICE
$ 1.15
.80
.70
.80
.80
.80
.85
.85
.90
.85
.85
.85
1.00
1.00
1.00
1.10
1.00
1.10
2.00
1.85
1.85
2.00
4.45
3.50
3.20
6.20
5.85
6.95
LIST
PRICE
$ .45
.45
.50
.45
.60
.65
.60
.75
1.00
1.75
3.05
10.90
CATALOG
PRICE
$ .95
.70
.60
.65
.65
.65
.70
.70
.75
.75
.75
.75
.85
.85
.85
.90
.85
.90
1.65
1.50
1.50
1.65
3.70
2.90
2.65
5.15
4.85
5.80
CATALOG
PRICE
$ .40
.40
.45
.40
.50
.55
.50
.65
.85
1.45
2.55
9.05
LIST
PRICE
$ .80
.80
.85
1.00
1.90
4.45
4.70
7.10
CATALOG
PRICE
$ .65
.65
.70
.85
1.55
3.70
3.90
5.90
LIST
PRICE
$ .80
.85
.85
.90
.90
1.00
1.60
3.20
4.05
9.66
CATALOG
PRICE
$ .65
.70
.70
.75
.75
.85
1.35
2.65
3.35
7.80
PIPE FITTINGS
PART NO.
M18
M14
M3814
M38
M1238
M12
M3412
M34
M100
M114
M112
M200
M300
DESCRIPTION
1/8" MPT
1/4" MPT
3/8" x 1/4" MPT
3/8" MPT
1/2" x 3/8" MPT
1/2" MPT
3/4" x 1/2" MPT
3/4" MPT
1" MPT
1 ¼" MPT
1 ½" MPT
2" MPT
3" MPT-SCH 80
LIST
PRICE
$ .50
.50
.55
.50
.55
.55
.65
.65
1.00
1.85
3.40
4.30
15.26
CATALOG
PRICE
$ .40
.40
.45
.40
.45
.45
.55
.55
.85
1.50
2.85
3.55
12.70
PART NO.
M12-3
M34-4
M34-6
M100-4
M100-6
M114-4
M114-6
M112-4
M112-6
M200-4
M200-6
DESCRIPTION
1/2" MPT x 3”
3/4" MPT x 4”
3/4" MPT x 6”
1" MPT x 4”
1" MPT x 6”
1 ¼" MPT x 4”
1 ¼" MPT x 6”
1 ½" MPT x 4”
1 ½" MPT x 6”
2" MPT x 4”
2" MPT x 6”
LIST
PRICE
$ 2.65
2.84
3.39
3.02
3.70
3.89
4.38
8.09
9.64
9.57
10.93
CATALOG
PRICE
$ 2.20
2.35
2.85
2.50
3.10
3.25
3.65
6.75
8.05
7.95
9.10
PART NO.
F18
F14
F38
F12
F34
F100
F114
F112
F200
F300
DESCRIPTION
1/8" MPT
1/4" MPT
3/8" MPT
1/2" MPT
3/4" MPT
1" MPT
1 ¼" MPT
1 ½" MPT
2" MPT
3" MPT-SCH 80
LIST
PRICE
$ .40
.50
.50
.55
.55
.80
1.40
1.75
2.15
17.86
CATALOG
PRICE
$ .35
.40
.45
.45
.45
.65
1.15
1.45
1.80
14.90
LIST
PRICE
$ 1.00
1.05
1.75
1.40
1.15
1.15
1.15
2.20
2.00
2.95
2.50
3.95
7.45
5.15
4.55
8.40
CATALOG
PRICE
$ .80
.85
1.45
1.15
.95
.95
.95
1.85
1.65
2.45
2.10
3.25
6.20
4.30
3.80
7.00
PART NO.
RB3814
RB1214
RB1238
RB3418
RB3414
RB3438
RB3412
RB10012
RB10034
RB11434
RB114100
RB112114
RB200100
RB200114
RB200112
RB300200
MPT
3/8"
1/2"
1/2"
3/4"
3/4"
3/4"
3/4"
1"
1"
1 ¼"
1 ¼"
1 ½"
2"
2"
2"
3"
TEFLON TAPE
PART NO.
1252
BY
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
FPT
1/4"
1/4"
3/8"
1/8"
1/4"
3/8"
1/2"
1/2"
3/4"
3/4"
1"
1 ¼"
1 ½"
1 ¼"
1 ½"
2"
PIPE
CROSS
CLOSE
NIPPLES
PIPE
COUPLINGS
PIPE
NIPPLES
SCHEDULE 80
PIPE TEES
HEX
HEAD
PIPE
PLUGS
HEX HEAD
BUSHINGS
90º PIPE
ELBOWS
90º STREET
ELBOWS
CHECK
VALVES
LIST
PRICE
$ 23.31
18.78
19.71
27.37
28.42
38.25
CATALOG
PRICE
$ 17.25
15.65
16.40
22.80
23.70
31.85
DESCRIPTION
1/2" FPT
3/4" FPT
1" FPT
1 ¼" FPT
1 ½" FPT
2" FPT
3" FPT -SCH 80
LIST
PRICE
$ 2.65
2.80
3.05
3.50
4.50
5.00
35.72
CATALOG
PRICE
$ 2.20
2.35
2.55
2.90
3.75
4.15
29.75
PART NO.
TT14
TT38
TT12
TT34
TT100
TT114
TT112
TT200
TT300
DESCRIPTION
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
1" FPT
1 ¼" FPT
1 ½" FPT
2" FPT
3" FPT-SCH 80
LIST
PRICE
$ 3.50
$ 3.68
4.55
5.60
8.90
10.50
11.15
16.60
63.96
CATALOG
PRICE
$ 2.90
3.05
3.80
4.65
7.40
8.95
9.30
13.85
51.75
PART NO.
LL12
LL34
LL100
LL114
LL112
LL200
LL300
DESCRIPTION
1/2" FPT
3/4" FPT
1" FPT
1 ¼" FPT
1 ½" FPT
2" FPT
3" FPT -SCH 80
LIST
PRICE
$ 3.55
3.94
5.20
7.20
9.20
14.50
56.23
CATALOG
PRICE
$ 2.95
3.25
4.35
6.00
7.65
12.05
46.85
PART NO.
SE14
SE38
SE12
SE34
SE100
SE114
SE112
SE200
SE300
DESCRIPTION
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
1 ¼" NPT
1 ½" NPT
2" NPT
3" NPT
LIST
PRICE
$ 2.20
3.19
2.60
3.25
5.80
7.40
8.45
10.95
56.23
CATALOG
PRICE
$ 1.80
2.30
2.15
2.70
4.80
6.15
7.00
8.95
46.85
LIST
PRICE
$ 12.05
13.40
17.82
20.53
33.78
CATALOG
PRICE
$ 10.05
11.20
16.05
17.95
28.45
PART NO.
CR12
CR34
CR100
CR114
CR112
CR200
DESCRIPTION
1/2" FPT
3/4" FPT
1" FPT
1¼" FPT
1½" FPT
2" FPT
PART NO.
FC12
FC34
FC100
FC114
FC112
FC200
FC300
2 PSI SPRING, PVC CONSTRUCTION.
PART NO.
KC2-0750-T
KC2-1000-T
KC2-1250-T
KC2-1500-T
KC2-2000-T
1/2" WIDE BY 520" LONG ROLL
LIST
CATALOG
PRICE
PRICE
$ 1.41
$ 1.15
www.sprayland.com
SCHEDULE 80
PAGE 36
DESCRIPTION
3/4" NPT
1" NPT
1 ¼" NPT
1 ½" NPT
2" NPT
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PIPE FITTINGS
CLOSE NIPPLES
PART NO.
M18B
M1418B
M14B
M3814B
M38B
M1238B
M12B
M34B
M3412B
DESCRIPTION
1/8" MPT
1/4" x 1/8 “MPT
1/4" MPT
3/8" x 1/4 “MPT
3/8" MPT
3/8" x 1/4 “MPT
1/2" MPT
3/4" MPT
3/4" x 1/2 “MPT
LIST
PRICE
$ 1.20
1.50
1.45
2.79
2.16
4.20
3.75
8.55
6.48
CATALOG
PRICE
$ .80
1.25
1.20
2.35
1.80
3.50
3.15
7.15
5.40
LIST
PRICE
$ .69
1.20
1.68
3.18
4.53
CATALOG
PRICE
$ .60
1.00
1.40
2.65
3.75
LIST
PRICE
$ 1.02
1.60
2.70
2.88
9.54
4.83
5.67
4.21
CATALOG
PRICE
$ .85
1.25
2.25
2.40
7.95
4.05
4.75
3.60
PIPE PLUGS
PART NO.
F18B
F14B
F38B
F12B
F34B
DESCRIPTION
1/8" MPT
1/4" MPT
3/8" MPT
1/2" MPT
3/4" MPT
HEX HEAD BUSHINGS
PART NO.
RB1418B
RB3814B
RB1214B
RB1238B
RB3418B
RB3414B
RB3438B
RB3412B
DESCRIPTION
1/4"
x 1/8"
3/8"
x 1/4"
1/2"
x 1/4"
1/2"
x 3/8"
3/4"
x 1/8"
3/4"
x 1/4"
3/4"
x 3/8"
3/4"
x 1/2"
90º STREET ELBOWS
PART NO.
SE14B
SE38B
SE12B
SE34B
DESCRIPTION
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
LIST
PRICE
$ 4.00
5.61
10.20
20.19
CATALOG
PRICE
$ 3.35
6.70
8.50
16.85
LIST
PRICE
$ 5.07
6.09
9.51
19.65
CATALOG
PRICE
$ 4.25
5.05
7.95
16.35
LIST
PRICE
$ 4.95
8.46
13.59
24.66
CATALOG
PRICE
$ 4.15
7.05
11.35
20.55
LIST
PRICE
$ 6.81
7.59
13.86
22.26
CATALOG
PRICE
$ 5.70
6.30
11.55
18.55
90º PIPE ELBOWS
PART NO.
LL14B
LL38B
LL12B
LL34B
DESCRIPTION
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
PIPE TEES
PART NO.
TT14B
TT38B
TT12B
TT34B
DESCRIPTION
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
STREET TEES
PART NO.
ST14B
ST38B
ST12B
TT34B
DESCRIPTION
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
ADAPTER
PART NO.
MF1814B
MF1234B
DESCRIPTION
1/8" MPT x 1/4" FPT
1/2" MPT x 3/4" FPT
LIST
PRICE
$ 1.47
14.94
CATALOG
PRICE
$ 1.25
12.45
(BY SPECIAL ORDER)
CLOSE NIPPLES
PART NO.
M18SS
M14SS
M38SS
M12SS
M34SS
DESCRIPTION
1/8" MPT
1/4" MPT
3/8" MPT
1/2" MPT
3/4" MPT
LIST
PRICE
$ 6.81
6.81
7.56
8.94
11.07
CATALOG
PRICE
$ 5.70
5.70
6.30
7.45
9.75
LIST
PRICE
$3.69
3.69
4.17
6.99
8.82
CATALOG
PRICE
$3.05
3.05
3.50
5.85
7.35
PIPE PLUGS
PART NO.
F18SS
F14SS
F38SS
F12SS
F34SS
DESCRIPTION
1/8" MPT
1/4" MPT
3/8" MPT
1/2" MPT
3/4" MPT
DESCRIPTION
1/4"
x 1/8"
3/8"
x 1/4"
1/2"
x 3/8"
3/4"
x 1/2"
www.sprayland.com
PART NO.
LL14SS
LL38SS
LL12SS
LL34SS
DESCRIPTION
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
LIST
PRICE
$ 7.26
8.82
10.26
14.10
CATALOG
PRICE
$ 6.05
7.35
8.55
11.75
LIST
PRICE
$ 9.90
12.18
14.31
18.87
CATALOG
PRICE
$ 8.25
10.15
11.95
15.75
LIST
PRICE
$ 8.34
10.65
11.16
17.76
CATALOG
PRICE
$ 6.95
8.90
9.30
14.80
90º STREET ELBOWS
PART NO.
SE14SS
SE38SS
SE12SS
SE34SS
DESCRIPTION
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
PIPE TEES
HEX HEAD BUSHINGS
PART NO.
RB1418SS
RB3814SS
RB1238SS
RB3412SS
90º PIPE ELBOWS
LIST
PRICE
$ 4.05
4.44
5.61
8.19
CATALOG
PRICE
$ 3.40
3.70
4.70
6.80
PART NO.
TT14SS
TT38SS
TT12SS
TT34SS
PAGE 37
DESCRIPTION
1/4" FPT
3/8" FPT
1/2" FPT
3/4" FPT
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
TUBE FITTINGS & HOSE
PUSH-IN TUBE FITTINGS
CONNECTOR BY FEMALE PIPE THREAD
CONNECTOR BY MALE PIPE THREAD
PART NO
PI010822S
PI011223S
MNPT
¼”
⅜”
LIST
PRICE
$ 1.64
2.82
TUBE O.D.
¼”
⅜”
CATALOG
PRICE
$ 1.50
2.55
PART NO
PI450822S
PI451222S
MNPT
¼”
⅜”
LIST
PRICE
$ 2.53
4.16
TUBE O.D.
¼”
⅜”
CATALOG
PRICE
$ 2.25
3.75
PART NO
PI0408S
PI0412S
MNPT
¼”
⅜”
LIST
PRICE
$ 2.53
3.79
TUBE O.D.
¼”
⅜”
CATALOG
PRICE
$ 2.25
3.40
PART NO
PI0208S
PI0212S
MNPT
¼”
⅜”
MNPT
¼”
⅜”
TUBE O.D.
¼”
⅜”
LIST
PRICE
$ 2.22
3.00
CATALOG
PRICE
$ 2.00
2.70
LIST
PRICE
$ 3.61
4.05
TUBE O.D.
¼”
⅜”
MNPT
¼”
⅜”
TUBE O.D.
¼”
⅜”
LIST
CATALOG
PRICE
PRICE
$ 3.23
$ 2.90
3.99
3.60
CONNECTOR TO QUICK TEEJET
TWO-WAY DIVIDER CONNECTOR
PART NO
PI2308S
PI2312S
CATALOG
PRICE
$ 3.15
3.60
TEE CONNECTOR
90° ELBOW CONNECTOR
PART NO
PI0308S
PI0312S
LIST
PRICE
$ 3.49
4.01
TUBE O.D.
¼”
⅜”
UNION CONNECTOR
CONNECTOR BY 90° MALE PIPE THREAD
PART NO
PI480822S
PI481223S
MNPT
¼”
⅜”
CATALOG
PRICE
$ 3.25
3.65
PART NO
QJ98590-¼
QJ98590-⅜
QJ98586-¼
QJ98586-⅜
DESCRIPTION
QUICK TEEJET BODY
QUICK TEEJET BODY
QUICK TEEJET CAP
QUICK TEEJET CAP
¾” FPT INLET,
8-½” FPT OUTLETS,
¼” GAUGE PORT
TUBING IS MEASURED O.D. AVAILABLE IN 100 FT
ROLLS.
O.D.
SIZE
¼"
¼"
⅜"
www.sprayland.com
COLOR
WHITE
BLACK
WHITE
CATALOG
PRICE
$ 8.65
8.65
4.15
4.15
MANIFOLD
POLYETHYLENE TUBING
PART NO.
15009275
15018882
15009285
LIST
TUBE O.D. PRICE
¼”
$ 12.40
⅜”
12.40
¼”
5.96
⅜”
5.86
LIST
PRICE/FT.
$ .33
.33
.53
CATALOG
PRICE/FT.
$ .30
.30
.45
PAGE 38
PART NO
M1284
DESCRIPTION
MANIFOLD
LIST
PRICE
$ 47.81
CATALOG
PRICE
$ 28.30
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
NOZZLE COMPONENTS
HOSE SHANK
BARB BY MALE NOZZLE THREAD
PART NO.
38D
3812D
BARB
3/8"
1/2"
BARB BY MALE NOZZLE THREAD
ELBOW
LIST
PRICE
$ 1.15
1.15
CATALOG
PRICE
$ 1.00
1.00
PART NO.
NTL38
NTL12
NTL58
NTL34
BARB BY BARB BY MALE NOZZLE THREAD
TEE
PART NO.
NTT38
NTT12
NTT58
NTT34
BARB
3/8"
1/2"
5/8"
3/4"
LIST
PRICE
$ 1.40
1.40
1.70
2.15
CATALOG
PRICE
$1.15
1.15
1.40
1.80
PART NO.
T38C
T12C
T34C
PART NO.
NEL10
LIST
PRICE
$ 3.50
BARB
3/8"
1/2"
3/4"
CATALOG
PRICE
$ 2.50
2.55
2.70
LIST
PRICE
$ 3.00
3.05
3.25
FOR USE WITH NOZZLE CAPS (threaded and QJ)
SWIVEL
BARB
FEMALE BY MALE NOZZLE THREAD
CATALOG
PRICE
$1.10
1.10
1.40
1.25
LIST
PRICE
$ 1.35
1.30
1.70
1.50
BARB BY BARB BY BARB BY MALE NOZZLE THREAD
CROSS
90º ADAPTER
BARB
3/8"
1/2"
5/8"
3/4"
PART NO.
K8414
K8438
K8412
CATALOG
PRICE
$ 2.80
BARB
1/4"
3/8"
1/2"
CATALOG
PRICE
$ .45
$ .45
.45
LIST
PRICE
$ .55
$ .55
.55
BOOM CLAMPS
PART NO.
AA111-1/2
BC34R
BC100R
AA111-1¼
FOR 1/2" PIPE
FOR 3/4" PIPE
FOR 1" PIPE
FOR 1 ¼" PIPE
LIST
PRICE
$ 4.80
2.45
2.45
8.04
CATALOG
PRICE
$ 3.35
2.05
2.05
5.65
MALE NOZZLE ADAPTERS
NPT
SIZE
1/8"
1/4"
3/8"
1/4"
1/2"
1/4"
MATERIAL
BRASS
BRASS
BRASS
NYLON
NYLON
STAINLESS STEEL
LIST
PRICE
$ 2.37
2.37
2.37
.50
.70
15.79
CATALOG
PRICE
$ 1.65
1.65
1.65
.45
.60
11.05
FEMALE NOZZLE ADAPTERS
PART NO.
CP1335
CP1321
NN4F
CP1321-SS
MATERIAL
BRASS
BRASS
NYLON
STAINLESS STEEL
LIST
PRICE
$ 2.37
2.37
1.53
15.79
CATALOG
PRICE
$ 1.65
1.65
1.00
11.05
NOZZLE CAPS
MATERIAL
BRASS
NYLON
STAINLESS STEEL
LIST
PRICE
$ 1.43
.40
8.59
CATALOG
PRICE
$ 1.00
.35
6.00
LIST
PRICE
$ 2.96
2.96
2.96
1.05
10.07
CATALOG
PRICE
$ 2.10
2.10
2.10
.85
7.05
FEMALE NOZZLE ADAPTERS
FEMALE PIPE THREAD BY FEMALE NOZZLE THREAD
FPT
PART NO.
SIZE
4676-1/8
1/8"
4676-1/4
1/4"
4676-3/8
1/4"
NF1614
1/4"
4676-SS-1/4 1/4"
www.sprayland.com
BARB BY MALE NOZZLE THREAD-BRASS CONSTRUCTION
PART NO.
6471B-400TD
6472B-531TD
9191B-400TD
9192B-531TD
LIST
PRICE
$ 13.31
13.31
13.31
13.31
BARB
3/8" ELBOW
1/2" ELBOW
3/8" TEE
1/2" TEE
CATALOG
PRICE
$ 9.75
9.75
9.75
9.75
NOZZLE STRAINERS
PART NO.
5053-50-SS
5053-100-SS
8079-PP-50
8079-PP-100
CATALOG
PRICE
$ 2.25
2.25
.95
.95
SCREEN
LIST
MESH
MATERIAL
PRICE
50
BRASS
$ 3.00
100
BRASS
3.00
50
POLYPROPYLENE 1.25
100
POLYPROPYLENE 1.25
NOZZLE STRAINERS w/CHECK
STAINLESS STEEL SCREEN WITH CHECK VALVE. REQUIRES 10 PSI TO OPEN.
FEMALE NOZZLE THREAD CAPS FOR NOZZLES
PART NO.
CP1325
8027
CP1325-SS
CATALOG
PRICE
$ 1.95
1.95
6.95
FITS INTO NOZZLE BODY. STAINLESS STEEL SCREEN.
FEMALE PIPE THREAD BY MALE NOZZLE THREAD
NPT
SIZE
1/8"
1/4"
1/4"
1/4"
FOR 1" TUBE
FOR 1¼" TUBE
FOR 1½" TUBE
LIST
PRICE
$ 2.35
2.35
9.88
NOZZLE FITTINGS
MALE PIPE THREAD BY MALE NOZZLE THREAD
PART NO.
CP1336
CP1322
CP1324
NB1614
NB1612
CP1322-SS
PART NO.
BC100
BC114
AA111SQ-1½
MATERIAL
BRASS
BRASS
BRASS
NYLON
STAINLESS STEEL
PAGE 39
SCREEN
PART NO.
MESH
4193A-50
50
4193A-100
100
4193A-PP-50
50
4193A-PP-100 100
4193A-SS-50
50
4193A-SS-100
100
MATERIAL
BRASS
BRASS
POLYPROPYLENE
POLYPROPYLENE
STAINLESS STEEL
STAINLESS STEEL
LIST
PRICE
$ 5.27
5.27
4.18
4.18
20.81
20.81
CATALOG
PRICE
$ 3.70
3.70
2.95
2.95
14.55
14.55
NOZZLE CHECK VALVES
CHECK VALVES REQUIRES 10 PSI MINIMUM TO OPERATE
PART NO.
11750-10
11750-PP-10
11750-SS-10
MATERIAL
BRASS
POLYPROPYLENE
STAINLESS STEEL
LIST
PRICE
$ 6.97
5.92
22.31
CATALOG
PRICE
$ 4.85
4.15
15.60
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
NOZZLE BODIES
QJ200 SERIES NOZZLE BODIES WITH DIAPHRAGM CHECK VALVESDRY BOOMS
QJ100 SERIES HOSE SHANK NOZZLE BODIES-DRY BOOMS
SINGLE HOSE SHANK
PART NO.
18635-111-406
18638-111-540
18719-111-785
HOSE SIZE
3/8"
1/2"
3/4"
SINGLE HOSE SHANK
PART NO.
19349-211-406
19349-211-540
19349-211-785
HOSE SIZE
3/8"
1/2"
3/4"
DOUBLE HOSE SHANK
PART NO.
18636-112-406
18639-112-540
18720-112-785
TEEJET LIST
$ 4.24
HOSE SIZE
3/8"
1/2"
3/4"
DOUBLE HOSE SHANK
PART NO.
19350-212-406
19350-212-540
19350-212-785
HOSE SIZE
3/8"
1/2"
3/4"
TEEJET LIST
$10.53
TRIPLE HOSE SHANK
CATALOG PRICE
$ 2.95
PART NO.
18637-113-406
18640-113-540
18721-113-785
HOSE SIZE
3/8"
1/2"
3/4"
TRIPLE HOSE SHANK
PART NO.
19351-213-406
19351-213-540
19351-213-785
HOSE SIZE
3/8"
1/2"
3/4"
CATALOG PRICE
$ 7.40
QJ300 SERIES NOZZLE BODIES WITH DIAPHRAGM CHECK VALVESDRY BOOMS
MULTIPLE NOZZLE HOSE SHANK BODIES WITH DIAPHRAGM CHECK
VALVES-DRY BOOMS
SINGLE HOSE SHANK
PART NO.
22251-311-375
22251-311-500
22251-311-750
HOSE SIZE
3/8"
1/2"
3/4"
DOUBLE HOSE
PART NO.
22252-312-375
22252-312-500
22252-312-750
TEEJET LIST
$ 20.58
THREE NOZZLE
TEEJET LIST
$ 8.70
CATALOG PRICE
HOSE SIZE
3/8"
1/2"
3/4"
PART NO.
QJ363C-500-1
QJ363C-500-2
QJ363C-750-1
QJ363C-750-2
QJ363C
$6.10
HOSE SIZE
1/2" SINGLE
1/2" DOUBLE
3/4" SINGLE
3/4" DOUBLE
CATALOG PRICE
$ 14.40
FOUR NOZZLE
PART NO.
QJ364C-500-1
QJ364C-500-2
QJ364C-750-1
QJ364C-750-2
TRIPLE NOZZLE HOSE SHANK BODIES WITH DIAPHRAGM
CHECK VALVES
QJ364C
SINGLE HOSE SHANK
PART NO.
24230A-1-406
24230A-1-540
24230A-1-785
HOSE SIZE
3/8"
1/2"
3/4"
TEEJET LIST
$ 22.64
FIVE NOZZLE
PART NO.
QJ365C-500-1
QJ365C-500-2
QJ365C-750-1
QJ365C-750-2
CATALOG PRICE
$ 15.85
DOUBLE HOSE SHANK
PART NO.
24230A-2-406
24230A-2-540
24230A-2-785
HOSE SIZE
1/2" SINGLE
1/2" DOUBLE
3/4" SINGLE
3/4" DOUBLE
HOSE SIZE
3/8"
1/2"
3/4"
HOSE SIZE
1/2" SINGLE
1/2" DOUBLE
3/4" SINGLE
3/4" DOUBLE
QJ365C
MULTIPLE NOZZLE BODIES WITH DIAPHRAGM
CHECK VALVES-WET BOOMS
NOZZLE BODY ASSEMBLIES FOR WET BOOMS
TEEJET LIST
$ 4.26
QUICKJET NOZZLE BODY
PART NO.
QJ7421-1/2-NYB
QJ7421-3/4-NYB
QJ7421-1-NYB
TEEJET LIST
$ 4.60
CATALOG PRICE
$ 3.45
HOSE SIZE
1/2" PIPE
3/4" PIPE
1" PIPE
PART NO.
QJ363C-1/2-NYB
QJ363C-3/4-NYB
QJ363C-1-NYB
CATALOG PRICE
$ 2.95
TEEJET LIST
$ 16.46
THREE NOZZLE
PIPE SIZE
1/2"
3/4"
1"
CATALOG PRICE
$11.50
QJ363C
QUICKJET NOZZLE BODY WITH
DIAPHRAGM CHECK VALVE
FOUR NOZZLE
PART NO.
QJ17560A-1/2-NYB
QJ17560A-3/4-NYB
QJ17560A-1-NYB
PART NO.
QJ364C-1/2-NYB
QJ364C-3/4-NYB
QJ364C-1-NYB
PIPE SIZE
1/2"
3/4"
1"
PIPE SIZE
1/2"
3/4"
1"
QJ364C
QUICKJET NOZZLE BODY WITH
DIAPHRAGM CHECK VALVE
PART NO.
QJ22187-1/2-NYB
QJ22187-3/4-NYB
QJ22187-1-NYB
www.sprayland.com
PIPE SIZE
1/2"
3/4"
1"
FIVE NOZZLE
TEEJET LIST
10.76
PART NO.
QJ365C-1/2-NYB
QJ365C-3/4-NYB
QJ365C-1-NYB
CATALOG PRICE
$ 7.55
PAGE 40
PIPE SIZE
1/2"
3/4"
1"
QJ365C
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
NOZZLE FITTINGS & DROPS
CAP AND GASKET SETS FOR QUICK TEEJET BODIES
FOR FLAT FAN & TURBO TEEJET® SPRAY TIPS.
PART NO.
25612-*-NYR
SHUT-OFF CAP
CATALOG
PRICE
$ .75
TEEJET
LIST
$1.08
PART NO.
19843-NYR
FOR LARGE CAPACITY FLAT FAN TEEJET® SPRAY TIPS.
PART NO.
25610-*-NYR
*QUICKJET CAP
COLORS
COLOR
BLACK
WHITE
RED
BLUE
GREEN
YELLOW
BROWN
COLOR
CODE
1
2
3
4
5
6
7
TEEJET
LIST
$1.22
FOR TWINJET® & AI TEEJET® SPRAY TIPS.
PART NO.
25598-*-NYR
TEEJET
LIST
$ 1.22
CATALOG
PRICE
$ .85
CAP ADAPTER WITH ¼" FPT OUTLET.
CATALOG
PRICE
$ .85
CAP ADAPTER WITH 45° ¼" FPT OUTLET.
PART NO.
QJ4676-¼-NYR
PART NO.
QJ4676-45-¼
FOR VISIFLO® FLOODJET® AND TURBO FLOODJET® SPRAY
TIPS.
PART NO.
25600-*-NYR
PART NO.
QJ4676-90-¼
FOR FLOODJET®, CONEJET®, AND FULLJET® SPRAY TIPS.
PART NO.
25608-*-NYR
CATALOG
PRICE
$ 3.30
TEEJET
LIST
$ 4.70
CATALOG
PRICE
$ 3.30
PART NO.
9950-0024
HYPRO
LIST
$ 9.05
CATALOG
PRICE
$ 6.35
BOOM CLAMPS FOR QUICK TEEJET BODIES
ADAPTERS FOR RETROFITTING
22674
TEEJET
LIST
$ 4.70
ADAPTER TO FIT HARDI® SPRAYER BODIES TO CONVERT TO
FIT HYPRO OR TEEJET CAPS. PURCHASE IN PACKETS OF 10.
CATALOG
PRICE
$ .85
TEEJET
LIST
$1.22
CATALOG
PRICE
$ 1.75
TEEJET
LIST
$ 2.46
FOR VISIFLO® FLOODJET® AND TURBO FLOODJET® SPRAY
TIPS.
CATALOG
PRICE
$ .85
TEEJET
LIST
$1.22
CATALOG
PRICE
$ 1.60
TEEJET
LIST
$ 2.29
QJ8360
QJ¼T
QJ¼TT
QJT
PART NO.
QJ¼TT-NYB
22674-¼-NYB
QJ¼T-NYB
QJT-NYB
QJ8360-NYB
QJT8360-NYB
QJ8355-¼-NYB
QJT8360
QJ8355
TO FIT:
¼" MPT
¼ MPT 45º
¼" FPT
11/16" NOZZLE THREAD
¼" MPT
11/16" NOZZLE THREAD
¼" FPT
TEEJET
LIST
$ 2.89
2.89
2.89
5.40
5.29
5.75
10.66
CATALOG
PRICE
$ 2.00
2.00
2.00
3.80
3.70
4.05
7.45
PART NO.
QJ111-½
QJ111-¾
QJ111-1
QJ111-1 ¼
QJ111SQ-¾
QJ111SQ-1
QJ111SQ-1¼
QJ111SQ-1½
QJ111-*-304SS
QJ111HP-3/4
TO CLAMP ON:
½" PIPE (13/16" & 7/8" OD)
¾" PIPE (1" & 1 1/16" OD)
1" PIPE (11/8" & 13/8" OD) )
1¼" PIPE (19/16" & 111/16" OD))
¾" SQUARE TUBING)
1" SQUARE TUBING)
1¼" SQUARE TUBING)
1½" SQUARE TUBING)
STAINLESS STEEL (SPECIFY SIZE)
¾" PIPE (1" & 11/16" OD) 90º ANGLE
TEEJET
LIST
$ 2.79
2.79
2.79
2.79
2.79
2.79
2.79
2.79
6.20
10.83
CATALOG
PRICE
$ 1.95
1.95
1.95
1.95
1.95
1.95
1.95
1.95
4.35
7.55
HOSE DROPS
DESIGNED TO ATTACH TO YOUR EXISTING NOZZLE BODIES FOR BANDING BETWEEN
THE ROWS. ¼" MPT OUTLET.
LIST
CATALOG
REF PART NO.
DESCRIPTION
PRICE
PRICE
1 21354-15-NYB
15" DROP FITS 11/16" NOZZLE THREAD $ 8.32
$ 5.80
1 21354-24-NYB
24" DROP FITS 11/16" NOZZLE THREAD
9.27
6.50
2 21353-15-NYB
15" DROP FITS QUICK TEEJET BODY
12.60
8.80
2 21353-24-NYB
24" DROP FITS QUICK TEEJET BODY
12.60
8.80
1
2
SWIVELS
SWIVEL BODIES ARE FOR USE WITH SPRAY TIPS TO DIRECT THE SPRAY PROJECTION. CAN BE
ATTACHED TO DROPS TO SPRAY BOTH SIDES OF THE ROW. LOCK NUT, 1/4" NPT INLET, 125 PSI MAX.
LIST
CATALOG
PART NO.
TYPE
OUTLET
PRICE
PRICE
8600-¼T-NYB
SINGLE SWIVEL-NYLON
MALE NOZZLE THREAD
$ 8.98
$ 6.30
8600-2-¼T-NYB
DOUBLE SWIVEL-NYLON
MALE NOZZLE THREAD
10.86
7.60
QJ8600-¼-NYB
SINGLE SWIVEL-NYLON
QUICK TEEJET
7.75
5.45
QJ8600-2-¼-NY
DOUBLE SWIVEL-NYLON
QUICK TEEJET
9.34
6.55
5540-¼TT
SINGLE SWIVEL-BRASS
MALE NOZZLE THREAD
20.76
15.55
6240-¼TT
DOUBLE SWIVEL-BRASS
MALE NOZZLE THREAD
20.33
15.25
www.sprayland.com
PAGE 41
8600 SINGLE SWIVEL
8600 DOUBLE SWIVEL
QJ8600 SINGLE SWIVEL
QJ8600 DOUBLE SWIVEL
5540 SINGLE SWIVEL-
6420 DOUBLE SWIVEL-BRASS
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY NOZZLES
AT 15 PSI
/
AT 60 PSI
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
EXCELLENT: PRE-EMERGE SURFACE APPLIED HERBICIDES, POSTEMERGE SYSTEMIC HERBICIDES AT LOWER PRESSURES (15-30
PSI), CONTACT HERBICIDES AND PESTICIDES AT HIGHER
PRESSURES (30-60 PSI).
EXCELLENT: LARGE AIR-FILLED DROPLETS FOR POSTEMERGE SYSTEMIC APPLICATIONS AT HIGHER
PRESSURES (30-100 PSI), WITH LESS DRIFT. USED FOR
HERBICIDES, INSECTICIDES, LIQUID FERTILIZERS, AND
FUNGICIDES.
SAMPLE TIP NO.
XR8002VS
CATALOG
PRICE
$ 5.15
TEEJET
LIST
$ 7.36
MATERIAL
VISIFLO®
(STAINLESS STEEL/CELCON)
XR8010SS
STAINLESS STEEL
6.10
8.74
SAMPLE TIP NO.
AI11002-VS
TYPICAL APPLICATIONS:
EXCELLENT: LARGE AIR-FILLED DROPLETS FOR POST-EMERGE
SYSTEMIC APPLICATIONS AT HIGHER PRESSURES (30-100 PSI),
WITH LESS DRIFT. USED FOR HERBICIDES, INSECTICIDES, LIQUID
FERTILIZERS, AND FUNGICIDES. MOLDED IN QUICKJET CAP.
EXCELLENT: PRE-EMERGE SURFACE APPLIED HERBICIDES
(15-30 PSI), POST-EMERGE CONTACT AND SYSTEMIC
HERBICIDES (40 PSI AND HIGHER), SYSTEMIC INSECTICIDES
AND FUNGICIDES.
CATALOG
PRICE
$ 5.20
TEEJET
LIST
$ 7.65
MATERIAL
VISIFLO®
(POLYMER)
SAMPLE TIP NO.
AIC11002-VS
TEEJET
LIST
$ 15.26
MATERIAL
VISIFLO®
CATALOG
PRICE
$ 10.70
(STAINLESS STEEL/CELCON)
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
EXCELLENT: PRE-EMERGE SURFACE APPLIED HERBICIDES,
POST-EMERGE SYSTEMIC HERBICIDES AT LOWER
PRESSURES (15-30 PSI), CONTACT HERBICIDES AND
PESTICIDES AT HIGHER PRESSURES (30-60 PSI). MOLDED IN
QUICKJET CAP
EXCELLENT: PRE-EMERGE SURFACE APPLIED HERBICIDES
(15-30 PSI), POST-EMERGE CONTACT AND SYSTEMIC
HERBICIDES (40 PSI AND HIGHER), SYSTEMIC INSECTICIDES
AND FUNGICIDES.
SAMPLE TIP NO.
TT11002VP
CATALOG
PRICE
$ 9.85
(STAINLESS STEEL/CELCON)
TYPICAL APPLICATIONS:
SAMPLE TIP NO.
AIXR11002VP
TEEJET
LIST
$ 14.07
MATERIAL
VISIFLO®
TEEJET
LIST
$ 6.94
MATERIAL
VISIFLO®
CATALOG
PRICE
$ 4.85
(POLYMER)
SAMPLE TIP NO.
XRC11004-VS
TEEJET
LIST
$ 8.44
MATERIAL
VISIFLO®
CATALOG
PRICE
$ 5.90
(STAINLESS STEEL/CELCON)
XRC11004-VK
VISIFLO®
4.80
6.89
(CERMANIC/CELCON)
Even Flat Spray
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
EXCELLENT: LARGE AIR-FILLED DROPLETS PROVIDES
LESS DRIFT WITH A WIDER PRESSURE RANGE (15-100
PSI). USED FOR HERBICIDES, INSECTICIDES, AND
LIQUID FERTILIZERS. REMOVABLE PRE-ORIFICE FOR
EASY CLEANING.
SAMPLE TIP NO.
TTI11004-VP
MATERIAL
VISIFLO®
TEEJET
LIST
$ 7.65
EXCELLENT: USED FOR BAND SPRAYING. PRE-EMERGE
SURFACE APPLIED HERBICIDES, POST-EMERGE SYSTEMIC
HERBICIDES (20-40 PSI).
CATALOG
PRICE
$ 5.35
(POLYMER)
SAMPLE TIP NO.
8002E
8004E-SS
8004EVS
MATERIAL
BRASS
STAINLESS STEEL
VISIFLO®
TEEJET
LIST
$ 4.48
11.54
6.57
CATALOG
PRICE
$ 3.15
8.05
4.60
(STAINLESS STEEL/CELCON)
Turbo TurfJet
Twin Tapered Flat Spray
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
EXCELLENT: LARGE DROPLETS PROVIDES LESS DRIFT
WITH A WIDER PRESSURE RANGE (15-100 PSI). USED
FOR FUNGICIDES, HERBICIDES, AND INSECTICIDES.
SAMPLE TIP NO.
TTJ60-11004VP
MATERIAL
VISIFLO®
TEEJET
LIST
$ 8.32
Spray Tips
EXCELLENT: DESIGNED FOR TURF APPLICATIONS. VERY
LARGE DROPLETS FOR LOW DRIFT, PRECISE,
DISTRIBUTION. PRE-EMERGE AND POST-EMERGE FOR
HERBICIDE, FUNGICIDE, AND INSECTICIDE APPLICATIONS.
¼” MPT INLET.
CATALOG
PRICE
$ 5.80
(POLYMER)
SAMPLE TIP NO.
¼TTJ05-VS
MATERIAL
VISIFLO®
TEEJET
LIST
$ 18.05
(STAINLESS STEEL/CELCON)
¼TTJ08-VP
VISIFLO®
9.33
CATALOG
PRICE
$ 12.65
6.55
(POLYMER)
www.sprayland.com
PAGE 42
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY NOZZLES
Twin Tapered Flat Spray
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
EXCELLENT: POST-EMERGE CONTACT HERBICIDES (30-60 PSI).
EXCELLENT: POST-EMERGE BANDING CONTACT HERBICIDES.
ALSO USED FOR INSECTICIDES, FUNGICIDES, DEFOLIANTS,
AND FOLIAR FERTILIZERS (40 PSI AND HIGHER).
GOOD: PRE-EMERGE SURFACE APPLIED HERBICIDES IN HEAVY
CROP RESIDUE (30-35 PSI).
SAMPLE TIP NO.
TJ60-8006VS
CATALOG
PRICE
8.70
TEEJET
LIST
$ 12.46
MATERIAL
VISIFLO®
(STAINLESS STEEL/CELCON)
SAMPLE TIP NO.
TX-1
TX-SS1
TX-VS1
CATALOG
PRICE
$ 4.35
27.30
4.85
TEEJET
LIST
$ 6.21
39.02
6.95
MATERIAL
BRASS
STAINLESS STEEL
VISIFLO®
(STAINLESS STEEL/CELCON)
Off-Center Spray Tips
TYPICAL APPLICATIONS:
TYPICALLY USED WITH SINGLE AND DOUBLE NOZZLE SWIVEL
BODIES FOR SPRAYING WIDE SWATHS. ALSO USED ON BOOM
SPRAYERS AS AN END NOZZLE FOR SPRAYING FENCE ROWS.
SAMPLE TIP NO.
OC-08
OC-SS03
MATERIAL
BRASS
STAINLESS STEEL
TEEJET
LIST
$11.76
17.40
EXCELLENT: PRE-PLANT SOIL INCORPORATION (15-25
PSI)SYSTEMIC PESTICIDES (15-25 PSI)
CATALOG
PRICE
$ 8.25
12.15
GOOD: POST-EMERGE SYSTEMIC HERBICIDES (20-30
SAMPLE TIP NO.
FL-6.5VS
CATALOG
PRICE
$ 8.75
TEEJET
LIST
$ 12.54
MATERIAL
VISIFLO®
(STAINLESS STEEL/CELCON)
FL-6.5VC
VISIFLO®
5.55
7.96
(POLYMER)
SEE SPRAY TIP RATE
CHARTS ON PAGE 85
FOR NOZZLE SIZES
AND APPLICATION
RATES.
Solid Stream Spray Tips
PRIMARILY USED FOR LIQUID FERTILIZER SPRAYING BUT
ALSO HAS MANY OTHER USES. 0º SPRAY ANGLE FOR LOW
DRIFT. ¼” MPT INLET.
SAMPLE TIP NO.
H1/4U-SS0015
ORIFICE PLATES
MATERIAL
STAINLESS STEEL
PLUG TIPS
STAINLESS STEEL FLOW REGULATORS FOR APPLYING
LIQUID FERTILIZER.
SAMPLE TIP NO.
CP4916-65
FLAT FAN TIP
TEEJET
LIST
$ 3.29
CATALOG
PRICE
$ 2.30
POLYACETAL PLASTIC SPRAY TIPS
ECONOMY STANDARD FLAT FAN SPRAY TIP.
SAMPLE TIP NO.
04-F80
TEEJET
CROSS REF.
8004
LIST
PRICE
$1.00
CATALOG
PRICE
$ .85
(FIRST 2 DIGITS IS THE TIP SIZE)
www.sprayland.com
TEEJET
LIST
$ 15.15
CATALOG
PRICE
$ 10.60
SPRAY TIP BLANKS TO PLUG THE
FLOW OF UNUSED NOZZLE BODIES.
TEEJET
LIST
$ .45
.70
SAMPLE TIP NO.
CP3942
BRASS
CP3942-SS
S.S.
FLOODING FAN TIP
CATALOG
PRICE
$ .35
.55
POLYACETAL PLASTIC SPRAY TIPS
ECONOMY FLOOD SPRAY TIP.
SAMPLE TIP NO.
30DT2.0
TEEJET
CROSS REF.
TK-2
LIST
PRICE
$ 1.35
CATALOG
PRICE
$ 1.10
(LAST 2 DIGITS IS THE TIP SIZE)
PAGE 43
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY NOZZLES
TYPICAL APPLICATIONS:
TYPICAL APPLICATIONS:
GOOD: PRE-EMERGE SURFACE APPLIED HERBICIDES (15-40 PSI).
SAMPLE TIP NO.
TK-3
TK-SS3
TK-VS3
TEEJET
LIST
$ 7.24
13.20
12.55
MATERIAL
BRASS
STAINLESS STEEL
VISIFLO®
CATALOG
PRICE
$ 5.05
9.25
8.80
THE BOOMLESS NOZZLE IS USED IN ARES NOT EASILY
USED WITH A BOOM SPRAYER. TWO LARGE OFFSET TIPS
AND THREE FLAT FAN SPRAY TIPS CREATE A LARGE
SPRAY SWATH. MOST COMMON USES ARE PASTURES,
TIMBERS, LARGE TURF AREAS, ETC. ¾” FPT BACK INLET
CONNECTION. REFER TO THE TEEJET SPRAYER GUIDE
FOR THE PROPER NOZZLE SIZE WHEN ORDERING OR
CALL SPRAY-LAND AND WE WILL BE HAPPY TO ASSIST
YOU WITH THE PROPER NOZZLE SIZE FOR YOUR
APPLICATION. SHIP WT. 2 LBS.
(STAINLESS STEEL/CELCON)
TYPICAL APPLICATIONS:
SAMPLE TIP NO.
5880-¾-2TOC10
EXCELLENT: SOIL INCORPORATED HERBICIDES ,
PRE-EMERGENCE HERBICIDES, POST-EMERGE SYSTEMIC
HERBICIDES AND FUNGICIDES. 10-40 PSI RATED,
SAMPLE TIP NO.
TF-VS4
TEEJET
LIST
$ 13.94
MATERIAL
VISIFLO®
(STAINLESS STEEL/CELCON)
TF-VP4
VISIFLO®
3.15
CATALOG
PRICE
$ 9.75
MATERIAL
BRASS
XP BoomJet
®
TEEJET
LIST
$ 247.51
CATALOG
PRICE
$ 192.00
Boomless Flat Spray Nozzle
TYPICAL APPLICATIONS:
2.20
EXTRA WIDE SPRAY PATTERN FOR
BOOMLESS SPRAY APPLICATIONS FOR
FIELDS, ROADSIDE, DE-ICING, AND END
ROW SPRAYING. ORDER LEFT AND OR
RIGHT HAND NOZZLE
(POLYMER)
Threaded Inlet
TYPICAL APPLICATIONS:
AVAILABLE IN THREADED SIZES FROM 1/8” TO 1”
NPT. CALL FOR PRICING ON SIZES NOT LISTED
BELOW.
PART NO.
1/4K-*
1/2K-*
3/4K-90 TO 120
3/4K-140 TO 210
1/4K-SS*
1/2K-SS*
3/4K-SS90 TO 120
3/4K-SS140 TO 210
MATERIAL
BRASS
BRASS
BRASS
BRASS
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
TEEJET
LIST
$ 8.79
19.65
32.22
59.45
20.30
33.02
45.01
80.97
CATALOG
PRICE
$ 6.15
13.75
22.55
41.50
14.25
23.10
31.50
56.75
Quick Connect Inlet
TYPICAL APPLICATIONS:
FITS INTO STANDARD 3/4” CAM COUPLINGS. TYPICALLY
USED ON HIGHER VOLUME APPLICATIONS.
TIP SIZES
QCK-SS20 TO 40
QCK-SS50 TO 80
QCK-SS100 TO 120
QCK-SS150 TO 210
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
TEEJET
LIST
$ 39.72
43.42
54.20
85.66
CATALOG
PRICE
$ 27.80
30.40
37.95
59.95
SAMPLE TIP NO.
1/4XP*R-VP OR L-VP
1/2XP*R-VP OR L-VP
www.sprayland.com
TEEJET
LIST
$ 53.08
63.22
CATALOG
PRICE
$ 37.15
44.25
Boom X Tender®
EXTRA WIDE SPRAY PATTERN FOR BOOMLESS SPRAY APPLICATIONS. LARGE
DROPLET SIZES FOR LOW DRIFT AND UNIFORM SPRAY PATTERN. USE ONE NOZZLE
FOR END ROW AND RIGHT OF WAY APPLICATIONS OR ONE ON EACH SIDE FOR FULL
BROADCAST SPRAYING APPLICATIONS. STAINLESS STEEL BODY AND POLY TIP FOR
GOOD WEARABLILITY. 30 TO 60 PSI OPERATING PRESSURES. CALL SPRAY-LAND TO
FIND THE PROPER NOZZLE RATE FOR YOUR APPLICATION.
TIP NO.
XT010
XT020
XT024
XT043
XT080
XT167
XT215
COLOR
GREEN
BLUE
YELLOW
ORANGE
RED
WHITE
GRAY
SWATH
(@48”H)
12 FT
17 FT
18 FT
18 FT
17 FT
16 FT
20 FT
NPT INLET
¼”
¼”
¼”
⅜”
½”
½”
¾”
HYPRO
LIST
$ 83.00
83.00
83.00
98.00
98.00
110.00
110.00
CATALOG
PRICE
$ 53.95
53.95
53.95
63.75
63.75
71.50
71.50
FastCap® Boom X Tender®
SAME FEATURES AS THE STANDARD BOOM X-TENDER WITH THE ADDED
CONVENIENCE OF A QUICK CAP TO USE ON QUICK CONNECT BOOM FITTINGS. ALL
POLY DESIGN. BODY AND POLY TIP FOR GOOD WEARABLILITY. 30 TO 60 PSI
OPERATING PRESSURES. CALL SPRAY-LAND TO FIND THE PROPER NOZZLE RATE
FOR YOUR APPLICATION.
TIP NO.
FC-XT020
FC-XT024
FC-XT043
PAGE 44
MATERIAL
POLYMER-SIZE *10, 20, 25
POLYMER-SIZE *40 OR 80
COLOR
BLUE
YELLOW
ORANGE
SWATH
(@48”H)
17 FT
18 FT
18 FT
HYPRO
LIST
$ 56.00
56.00
68.00
CATALOG
PRICE
$ 36.50
36.50
44.25
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GAUGES
DRY GAUGES
THESE ECONOMICAL GAUGES ARE RESISTANT TO MOST CHEMICALS. BLACK ENAMELED
STEEL CASE, BRONZE TUBE, BRASS MOVEMENT, AND WHITE ALUMINUM DIAL. PRESSURES TO
600 PSI, 176ºF. MAX. FOR USE WITH FERTILIZERS, USE GAUGE ISOLATORS SHOWN BELOW.
PART NO.
SG601.58C*
SG1001.58C*
SG15
SG60
SG604
SG100
SG1004
SG200
SG300
SG600
PSI RANGE
0-60
0-100
0-15
0-60
0-60
0-100
0-100
0-200
0-300
0-600
FACE SIZE
1 ½" DIA.
1 ½" DIA.
2 ½" DIA.
2 ½" DIA.
4" DIA.
2 ½" DIA.
4" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
LIST
PRICE
$ 5.75
5.75
7.80
7.80
17.00
7.80
17.00
7.80
7.80
7.80
CATALOG
PRICE
$ 4.45
4.45
6.25
6.25
15.75
6.25
15.75
6.25
6.25
6.25
* BACK MOUNT 1/8” NPT
GLYCERIN FILLED GAUGES
THESE STURDY GAUGES ARE USED FOR HIGH PRESSURE WASHERS AND MANY DIFFERENT
COMMERCIAL APPLICATIONS. LIQUID FILLED TO ELIMINATE "NEEDLE BOUNCING". 304
STAINLESS STEEL CASE, BRONZE TUBE, BRASS MOVEMENT, AND WHITE ALUMINUM DIAL FACE.
PRESSURES TO 10,000 PSI, 176ºF. MAX. PRESSURE. FOR USE WITH FERTILIZERS, USE GAUGE
ISOLATORS SHOWN BELOW.
PART NO.
GG60
GG604
GG100
GG1004
GG300
GG600
GG1500
GG2000
GG3000
GG5000
GG10000
PSI RANGE
0-60
0-60
0-100
0-100
0-300
0-600
0-1500
0-2000
0-3000
0-5000
0-10,000
FACE SIZE
2 ½" DIA.
4” DIA.
2 ½" DIA.
4" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
LIST
PRICE
$ 24.00
40.50
24.00
40.50
24.00
24.00
24.00
24.00
24.00
24.00
38.00
CATALOG
PRICE
$ 19.95
$ 31.95
19.95
31.95
19.95
19.95
19.95
19.95
19.95
19.95
28.75
ALL STAINLESS STEEL GLYCERIN GAUGES
THESE GAUGES ARE USED FOR ANHYDROUS AMMONIA, LIQUID FERTILIZERS, LIQUID DEI-ICE
CHEMICALS, AND OTHER SPRAY APPLICATIONS WHERE CHEMICAL CORROSION IS AN ISSUE.
LIQUID FILLED TO ELIMINATE "NEEDLE BOUNCING". 304 STAINLESS STEEL CASE, TUBE, AND
MOVEMENT, AND WHITE ALUMINUM DIAL FACE. 1/4” NPT INLET.
PART NO.
WGGSS60
WGGSS100
WGGSS160
PSI RANGE
0-60
0-100
0-160
FACE SIZE
2 ½" DIA.
2 ½" DIA.
2 ½" DIA.
LIST
PRICE
$ 65.80
65.80
65.80
CATALOG
PRICE
$ 54.85
54.85
54.85
GAUGE ISOLATORS
ECONOMY GAUGE ISOLATOR DESIGNED TO PROTECT
GAUGE FROM CHEMICAL DAMAGE. MADE OF
POLYPROPYLENE AND VITON. THE GAUGE SIDE
REQUIRES OIL OR ATF FILLED TO READ PRESSURE.
PART NO.
3614-14D
NPT SIZE
1/4"
www.sprayland.com
LIST
PRICE
$ 25.75
HEAVY DUTY GAUGE ISOLATOR DESIGNED
TO PROTECT AGAINST HARSH CHEMICALS. MADE OF
STAINLESS STEEL, VITON AND ACETAL. THE GAUGE
SIDE REQUIRES OIL OR ATF FILLED TO READ
PRESSURE.
CATALOG
PRICE
$ 18.75
PART NO.
22470A-1/8
22470A-1/4
PAGE 45
NPT SIZE
1/8"
1/4"
TEEJET
LIST
$ 90.76
90.76
CATALOG
PRICE
$ 63.50
63.50
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAYER CALIBRATORS
CALIBRATION CONTAINER
THIS HANDY CONTAINER HAS A 64
OZ. CAPACITY IN U.S. AND METRIC
SCALE. FOR PRECISE MEASURING
OF CHEMICALS FOR MIXING OR
COLLECTING CHEMICALS.
POLYPROPYLENE CONSTRUCTION.
PART NO.
24034
DIRECT READING CALIBRATION SCALE TELLS HOW
MANY GALLONS PER ACRE BEING APPLIED AND
CHECKS FOR WORN OR PLUGGED SPRAY TIPS. NO
COMPLEX CALIBRATIONS. SIMPLE AS 1-2-3.
WIND METER
SPRAY TIP TESTER
TIP CALIBRATOR MAKES SPRAYER
CALIBRATION EASY AND ACCURATE.
THE FLOATING BALL SHOWS GALLONS
PER MINUTE ON THE LEFT SCALE TO
CALIBRATE GALLONS PER ACRE OR
DETERMINE IF THE NOZZLE IS WORN.
THIS COMPACT WIND METER IS
EASY TO USE. MEASURES WIND
VELOCITY ON THREE SCALES;
BEAUFORT, MPH, AND METERS/SEC.
INCLUDES TUBE CLEANERS AND A
STORAGE POUCH.
PART NO.
38560
PART NO.
5167050
CATALOG
PRICE
$ 8.75
LIST
PRICE
$ 9.68
PART NO.
SC-70
CATALOG
PRICE
$ 9.25
LIST
PRICE
$ 10.85
FIELD SPRAYER CALIBRATOR
CATALOG
PRICE
$ 22.50
LIST
PRICE
$ 28.25
CATALOG
PRICE
$ 24.75
LIST
PRICE
$ 41.25
SPRAY TIP MONITORS
THIS SPRAY BALL MONITOR IS A SIMPLE INEXPENSIVE WAY TO MONITOR THOSE NOZZLES YOU CAN'T SEE. YOU WON'T KNOW IF THOSE SPRAY TIPS YOU
CAN'T SEE ARE WORN OR PLUGGED UNTIL LATER WHEN YOU SEE STRIPPING IN THE FIELD. WHEN ALL THE BALLS ARE FLOATING EVEN, THE NOZZLES
ARE SPRAYING EVEN. IF A BALL IS FLOATING LOWER THAN THE OTHERS, IT MEANS THAT A NOZZLE IS PLUGGED OR DAMAGED. ORDER A MANIFOLD
MONITOR FOR 4 NOZZLES AND ADD AS NEEDED TO CREATE YOUR OWN NUMBER OF COLUMNS FOR YOUR APPLICATION.
4 MODULAR MANIFOLD
SINGLE STARTER
PART NO.
3999-2
3999-3438
3999-3412
3999-0038
3999-0012
www.sprayland.com
DESCRIPTION
4 MODULAR MANIFOLD
SINGLE MODULAR STARTER-3/8”
SINGLE MODULAR STARTER-1/2”
SINGLE MODULAR ADDER-3/8”
SINGLE MODULAR ADDER-1/2”
PAGE 46
LIST
PRICE
$ 119.00
35.50
35.50
27.44
27.44
SINGLE ADDER
CATALOG
PRICE
$ 99.00
28.00
28.00
22.75
22.75
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GPS GUIDANCE SYSTEMS
CENTERLINE™ 220
FEATURES:
» VERSATILE GPS IN A COMPACT, PORTABLE PACKAGE.
» LED LIGHTBAR GUIDANCE PLUS A GRAPHICAL DISPLAY FOR COMPLETE
GUIDANCE INFORMATION.
» 5 Hz INTERNAL GPS ENGINE WITH EXTERNAL ANTENNA.
» SIMPLE SETUP FOR EASE OF USE AND QUICK SET UP.
» STRAIGHT-LINE (PARALLEL) AND CURVED AB GUIDANCE MODES.
» INTEGRATED LOOK-AHEAD FUNCTIONALITY ANTICIPATES VEHICLES
FUTURE POSITION.
» RETURN TO POINT FEATURE.
» DURABLE, SEALED RUBBER KEYPAD IS EASY TO SEE AND PROVIDES
GOOD TACTILE FEEDBACK.
» PROVIDES RADAR-LIKE SPEED SIGNAL OUTPUT FOR USE WITH OTHER
CONTROL SYSTEMS THAT REQUIRE A GROUND SPEED SIGNAL.
» ADAPTABLE FOR FIELDPILOT™ AUTO-STEER
* CENTERLINE 220 SYSTEM INCLUDES CONSOLE, CIGARETTE LIGHTER
ADAPTER, PATCH ANTENNA AND INSTRUCTION MANUAL.
MONITOR NOT INCLUDED
OR
(PATCH)
CENTERLINE 220 SYSTEMS AND COMPONENTS
PART NO.
90-02399
45-05458
78-50155
90-02720
45-05478
45-20042
45-05508
DESCRIPTION
CENTERLINE™ 220 SYSTEM*
LIGHTER CABLE
PATCH ANTENNA
ANTENNA KIT RXA-30 w/20FT CABLE
POWER CABLE-BATTERY
PATCH CABLE TO TEEJET MONITOR
PATCH CABLE TO RAVEN MONITOR
WT
3
1
1
1
1
1
1
TEEJET
LIST
$ 1181.25
55.35
107.89
426.16
68.62
62.04
62.04
CATALOG
PRICE
$ 1050.00
49.00
96.50
384.00
61.75
55.85
55.85
BOOMPILOT® AUTO BOOM SECTION CONTROL FOR MATRIX®PRO
FEATURES:
» USED IN CONJUNCTION WITH THE CENTERLINE MATRIX PRO 570/840
» LOW COST ASSISTED STEERING
» HYDRAULIC STEERING INTERFACE FOR OPTIMUM PERFORMANCE
» REMOTE ENGAGE/DISENGAGE SWITCH
» FIELDPILOT KIT CONTAINS STEER VALVE, STEERING CONTROL MODULE,
®
AND WIREHARNESS TO HOOK UP TO MATRIX CONSOLE
»
CUSTOM INSTALLATION KITS AVAILABLE TO FIT MOST COMMON
VEHICLES (*MUST BE ORDERED WITH FIELDPILOT KIT)
BOOMPILOT SYSTEMS AND COMPONENTS
PART NO.
90-02666
90-02667
90-02668
78-05072
45-05719
45-05720
45-05737
www.sprayland.com
DESCRIPTION
BOOMPILOT KIT -TEEJET
BOOMPILOT KIT -RAVEN 440/450/460
BOOMPILOT KIT -RAVEN 4000
SECTION DRIVER MODULE
WIRE HARNESS-TEEJET
WIRE HARNESS-RAVEN 440
WIRE HARNESS-RAVEN 4000
PAGE 47
WT
3
3
3
1
1
1
1
TEEJET
LIST
$ 1159.79
1159.79
1159.79
809.16
350.63
350.63
350.63
CATALOG
PRICE
$ 985.00
985.00
985.00
688.00
315.00
315.00
315.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GPS GUIDANCE SYSTEMS
MATRIX®PRO 570G
FEATURES:
» REALVIEW SYSTEM THAT ALLOWS GUIDANCE AND LIVE VIDEO AT THE SAME TIME
» CHOOSE YOUR VIEW FROM GUIDANCE OVER VIDEO, VIDEO ONLY, OR GUIDANCE
TM
ONLY.
» 5.7 INCH VIEWING SCREEN EASILY VIEWABLE IN BRIGHT CONDITIONS.
» STRAIGHT-LINE CURVED LINE, CIRCLE PIVOT, AND LAST PASS GUIDANCE MODES.
» MAPPING AND COVERAGE DATA COLLECTION.
» CAMERA CAN BE MOUNTED ANYWHERE TO MEET YOUR VIEWING NEEDS .
» UPGRADABLE TO ADD EXTRA CAMERAS (UP TO 8) BY ADDING A VIDEO SELECTOR
MODULE.
» UPGRADABLE TO BOOMPILOT BOOM SELECTION CONTROL AND FIELD PILOT AUTO
STEER CONTROL.
MATRIX 570G SYSTEM INCLUDES CONSOLE, CABLES, PATCH ANTENNA, REALVIEW
CAMERA, AND INSTRUCTION MANUAL.
VIDEO SELECTOR MODULE-4 CH.
MATRIX 570G SYSTEMS AND COMPONENTS
PART NO.
90-02554
90-02546
90-02719
78-08067
78-08068
78-50155
90-02720
45-05645
45-05775
DESCRIPTION
MATRIX PRO 570G SYSTEM W/ PATCH ATENNA & CAMERA
REALVIEW TM CAMERA KIT WITH 20’ CABLE
REALVIEW TM CAMERA KIT WITH 60’ CABLE
VIDEO SELECTOR MODULE-4 CHANNEL
VIDEO SELECTOR MODULE-8 CHANNEL
PATCH ANTENNA
ANTENNA KIT RXA-30 w/20FT CABLE
LIGHTER CABLE
POWER CABLE-BATTERY
MATRIX®PRO
840G
WT
4
1
1
1
1
1
1
1
1
TEEJET
LIST
$ 2110.50
242.75
316.11
451.51
525.63
107.89
426.16
64.76
71.96
CATALOG
PRICE
$ 1795.00
218.00
284.00
406.00
473.00
96.50
384.00
58.00
64.75
FEATURES:
» REALVIEW SYSTEM THAT ALLOWS GUIDANCE AND LIVE VIDEO AT THE SAME TIME
» CHOOSE YOUR VIEW FROM GUIDANCE OVER VIDEO, VIDEO ONLY, OR GUIDANCE
TM
ONLY.
» 8.4 INCH TOUCH SCREEN FOR INCREASED VIEWING AREA.
» STRAIGHT-LINE CURVED LINE, CIRCLE PIVOT, AND LAST PASS GUIDANCE MODES.
» MAPPING AND COVERAGE DATA COLLECTION.
» CAMERA CAN BE MOUNTED ANYWHERE TO MEET YOUR VIEWING NEEDS .
» UPGRADABLE TO ADD EXTRA CAMERAS (UP TO 8) BY ADDING A VIDEO SELECTOR
MODULE.
» UPGRADABLE TO BOOMPILOT BOOM SELECTION CONTROL AND FIELD PILOT AUTO
STEER CONTROL.
MATRIX 840G SYSTEM INCLUDES CONSOLE, CABLES, PATCH ANTENNA, REALVIEW
CAMERA, AND INSTRUCTION MANUAL.
VIDEO SELECTOR MODULE-8 CH.
MATRIX 840G SYSTEMS AND COMPONENTS
PART NO.
90-02626
90-02546
90-02719
78-08067
78-08068
78-50155
90-02720
45-05645
45-05775
www.sprayland.com
DESCRIPTION
MATRIX PRO 840G SYSTEM W/ PATCH ATENNA & CAMERA
REALVIEW TM CAMERA KIT WITH 20’ CABLE
REALVIEW TM CAMERA KIT WITH 60’ CABLE
VIDEO SELECTOR MODULE-4 CHANNEL
VIDEO SELECTOR MODULE-8 CHANNEL
PATCH ANTENNA
ANTENNA KIT RXA-30 w/20FT CABLE
LIGHTER CABLE
POWER CABLE-BATTERY
PAGE 48
WT
4
1
1
1
1
1
1
1
1
TEEJET
LIST
$ 2845.50
242.75
316.11
451.51
525.36
107.89
426.16
64.76
71.96
CATALOG
PRICE
$ 2395.00
218.00
284.00
406.00
473.00
96.50
384.00
58.00
64.75
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GPS STEER ASSIST
UNIPILOT® STEER ASSSIST FOR MATRIX®PRO
FEATURES:
» UNIVERSAL MOUNTING KIT TO FIT MANY VEHICHLES.
» EASILY TO USE AND INSTALL WITH YOUR EXISTING
MATRIX® SYSTEM
» MOUNTS EASILY TO YOUR STEERING COLUMN
WITHOUT NEED ACCESS TO YOUR
HYDRAULIC SYSTEM
» CAN BE MOVED TO OTHER VEHICHLES WITH MINIMAL
EFFORT.
UNIPILOT INCLUDES SCM, ESM, AND MOUNTING
BRACKET (MATRIX NOT INCLUDED)
UNIPILOT SYSTEMS AND COMPONENTS
PART NO.
91-02400
90-02806
28-01030
91-07015
DESCRIPTION
UNIPILOT® STEER ASSIST SYSTEM
UNIPIOLT KIT-ESM & BRACKET ONLY
FRICTION WHEEL-STEER MOTOR
KIT-UNIVERSAL MOUNTING BRACKET
WT
4
2
1
2
TEEJET
LIST
$ 4708.40
3779.31
40.35
108.35
CATALOG
PRICE
$ 3995.00
3200.00
34.75
91.75
FIELDPILOT® STEER ASSSIST FOR MATRIX®PRO
FEATURES:
» USED IN CONJUNCTION WITH THE MATRIX PRO 570G or 840G (NOT INCLUDED)
» LOW COST ASSISTED STEERING
» HYDRAULIC STEERING INTERFACE FOR OPTIMUM PERFORMANCE
» REMOTE ENGAGE/DISENGAGE SWITCH AVAILABLE
» FIELDPILOT KIT CONTAINS STEERING CONTROL MODULE,
®
POWER/CAN/DATA CABLE, CAN TERMINATOR, SMC TO CAN HARNESS, AND
VOLTAGE REGULATOR TO HOOK UP TO MATRIX CONSOLE
»
VEHICHLE INSTALLATION KITS TO FIT OVER 300 VEHICLES (*MUST BE
ORDERED WITH FIELDPILOT KIT)
FIELD PILOT SYSTEMS AND COMPONENTS
PART NO.
91-00008
91-023‡‡
32-04020
78-08072
45-05396
www.sprayland.com
TEEJET
CATALOG
DESCRIPTION
WT
LIST
PRICE
FIELDPILOT KIT
3
$ 2866.68
$ 2435.00
VEHICLE KIT -*CONTRACT SPRAY-LAND FOR CORRECT VEHICLE KIT AND PRICE
ENGAGE/DISENGAGE FOOT SWITCH
1
204.15
173.00
VOLTAGE REGULATOR
1
158.75
135.00
POWER CABLE-3 POS
1
122.66
104.50
PAGE 49
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRONIC SPRAY MONITORS
854 SPRAYER CONTROL
FEATURES:
THE 854 INCLUDES ALL FEATURES OF THE 844-E PLUS:
» DEDICATED BUTTON TO SELECT RATE PRESETS.
» SENSOR MONITORS TO SHOW STATUS OF SPEED, PRESSURE, AND
FLOW SENSORS.
» DUAL BOOM CAPABILITY TO SWITCH TO SECOND SET OF SPRAY TIPS.
» SUPPORT FOR FILL FLOW METER AND FILL CONTROL VALVE TO
AUTOMATE FILLING FUNCTION.
» AUTO MASTER AUTOMATICALLY SHUTS MASTER SWITCH OFF WHEN
SPEED FALLS BELLOW A CERTAIN VALUE.
» AUDIBLE ALARM.
» MULTIPLE VOLUME AND AREA COUNTERS
CORE KIT INCLUDES CONSOLE, MOUNTING BRACKETS, CABLES AND
INSTRUCTION MANUAL
COMPLETE SYSTEM INCLUDES CORE KIT, PRESSURE SENSOR, 1” 801
FLOW METER, AND 1” REGULATING VALVE.
ORDER SPEED SENSOR SEPARATELY
ORDER BOOM VALVES SEPARATELY (SEE PAGE 55)
801 FLOW METER
STANDARD AND RAPID CHECK FLOW METERS
FLOW METERS
STAINLESS TURBINE AND
BEARINGS FOR LONG LIFE,
NON CORROSIVE BODY,
HOSE BARB INLET AND
OUTLET. THREE TYPES
AVAILABLE: 801, STANDARD,
AND RAPID CHECK. "RAPID
CHECK" DESIGN ALLOWS
FOR QUICK CLEANING AND
INSPECTION.
PRESSURE SENSOR
STAINLESS STEEL PRESSURE SENSOR
WORKS WITH FLOW SENSOR TO MAKE THE
854 MONITOR VERY ACCURATE AND
RELIABLE. CHOOSE EITHER 145 PSI OR 363
PSI SENSOR FOR YOUR APPLICATION
REGULATING VALVE
HIGH QUALITY BALL VALVE SPECIALLY
SHAPED STAINLESS STEEL BALL FOR
MAXIMUM DURABILITY AND BETTER
PRESSURE REGULATION. 1" NPT INLET/
OUTLET, 27 GPM, 300 PSI MAX. RATINGS. 6
SECOND CYCLE RESPONSE.
SPEED SENSORS
RADAR SENSOR
COMPACT DESIGN, EASY TO
MOUNT. COMPATIBLE WITH
ALL RADAR STYLE
MONITORS.
MAGNETIC WHEEL SENSOR
ALL COMPONENTS ARE PLATED
STEEL OR ALUMINUM FOR LONG
LIFE. SENSOR HAS BUILT IN
TEST LIGHT. INCLUDES
MOUNTING BRACKET.
PROXIMITY SENSOR
RELIABLE AND EASY TO USE
BECAUSE THEY DON'T
REQUIRE MAGNETS AND
WILL READ SIGNALS FROM
METAL OBJECTS. BUILT-IN
TEST LIGHT.
GPS SPEED SENSOR
COMPATIBLE WITH RADAR STYLE SPEED
SENSOR INPUTS FROM TEEJET MONITORS.
CABLE CONNECTS DIRECTLY INTO SPEED
CABLE. PATCH ANTENNA INCLUDED.
854 SYSTEMS AND COMPONENTS
PART NO.
854-KIT
90-02108
16-40012
90-02169
16-40004
90-02386
90-50230
57-10068
57-10097
57-10078
57-10079
90-02476
90-02482
35-02099
www.sprayland.com
DESCRIPTION
854 CONTROL SYSTEM
854 CORE KIT
WHEEL SENSOR KIT
RADAR SPEED SENSOR
PROXIMITY SENSOR
GPS SPEED SENSOR
801 FLOW METER 1” BARBS
STANDARD FLOW METER 1” BARBS
STANDARD FLOW METER 2” BARBS
RAPID CHECK FLOW METER 1” BARBS
RAPID CHECK FLOW METER 1½” BARBS
PRESSURE TRANSDUCER 0- 145 PSI
PRESSURE TRANSDUCER 0- 363 PSI
1 “ NPT REGULATING VALVE
PAGE 50
WT
19
12
3
3
1
1
1
1
2
2
3
1
1
3
TEEJET
LIST
$ 2677.98
1700.94
257.28
707.70
94.51
476.56
458.15
497.20
837.98
591.60
726.72
287.65
285.54
231.24
CATALOG
PRICE
$ 2055.00
1275.00
205.00
565.00
75.00
380.00
365.00
395.00
670.00
470.00
580.00
230.00
225.00
185.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRONIC SPRAY MONITORS
844-E SPRAYER CONTROL
FEATURES:
» LARGE BACK-LIT DISPLAY SHOWS ALL INFORMATION AT A GLANCE.
(APPLICATION RATE, PRESSURE, SPEED, AREA COVERED, TIP COLOR,
AND VOLUME APPLIED.
» COLOR CODED TIP BAR FOR EASY PROGRAMMING
» COMMUNICATION PORTS FOR PC AND GPS INTERFACING
» FLOW OR PRESSURE BASED REGULATION.
» 5-BOOM SECTION SWITCHES PLUS MASTER SHUT OFF SWITCH.
» BUILT-IN APPLICATION PLANNING TOOL.
» WEATHER-RESISTANT HOUSING.
» SINGLE CABLE CONNECTION FOR EASY HOOKUP.
CORE KIT INCLUDES CONSOLE, MOUNTING BRACKETS, CABLES, AND
INSTRUCTION MANUAL.
COMPLETE SYSTEM INCLUDES CORE KIT, 1” 801 FLOW METER, AND 1”
REGULATING VALVE. ORDER SPEED SENSOR
SEPARATELY.
ORDER BOOM VALVES SEPARATELY (SEE PAGE 55)
801 FLOW METER
STANDARD AND RAPID CHECK FLOW METERS
FLOW METERS
STAINLESS TURBINE AND
BEARINGS FOR LONG LIFE,
NON CORROSIVE BODY,
HOSE BARB INLET AND
OUTLET. THREE TYPES
AVAILABLE: 801, STANDARD,
AND RAPID CHECK. "RAPID
CHECK" DESIGN ALLOWS
FOR QUICK CLEANING AND
INSPECTION.
PRESSURE SENSOR
STAINLESS STEEL PRESSURE SENSOR
WORKS WITH FLOW SENSOR TO MAKE THE
854 MONITOR VERY ACCURATE AND
RELIABLE. CHOOSE EITHER 145 PSI OR 363
PSI SENSOR FOR YOUR APPLICATION
REGULATING
FLOWVALVE
METERS
HIGH QUALITY
BALL
VALVE AND
SPECIALLY
EASY TO
INSPECT
CLEAN,
SHAPED STAINLESS
STAINLESSTURBINE
STEEL BALL
ANDFOR
MAXIMUM
DURABILITY
AND
BETTER
BEARINGS FOR LONG LIFE, NON
PRESSURE
REGULATION.
1" AVAILABLE
NPT INLET/
CORROSIVE
BODY,
OUTLET, WITH
27 GPM,
6
¾", 300
1", 1PSI
½" MAX.
OR 2”RATINGS.
HOSE
SECONDBARBS.
CYCLE RESPONSE.
TWO TYPES AVAILABLE:
STANDARD AND RAPID CHECK.
"RAPID CHECK" DESIGN ALLOWS
FOR QUICK CLEANING AND
INSPECTION.
SPEED SENSORS
RAPID CHECK
PROXIMITY SENSOR
MAGNETIC WHEEL SENSOR
RADAR SENSOR
RADAR SENSOR
MAGNETIC
RELIABLE AND EASYPROXIMITY
TO USE
GPS SPEED SENSOR
ALL COMPONENTS
AREWHEEL
PLATEDSENSOR
COMPACT DESIGN, EASY TO
SENSOR
COMPATIBLE WITH RADAR STYLE SPEED
STEEL OR ALUMINUM FOR LONG BECAUSE THEY DON'T
MOUNT. COMPATIBLE WITH
COMPACT DESIGN, EASY TO MOUNT.
ALL
COMPONENTS
ARE
PLATED
STEEL
REQUIRE MAGNETS RELIABLE
AND
SENSOR
INPUTS
FROM TEEJET
LIFE. SENSOR HAS BUILT IN
ALL RADAR STYLE
AND
EASY TO
USE BECAUSE
THEYMONITORS.
COMPATIBLE WITH ALL RADAR STYLE
OR
ALUMINUM
FOR
LONG
LIFE.
SENSOR
WILL READ SIGNALSDON'T
FROM REQUIRE
CABLE
CONNECTS
TEST LIGHT. INCLUDES
MONITORS.
MAGNETS
ANDDIRECTLY
WILL READINTO SPEED
MONITORS.
HAS
BUILT
IN
TEST
LIGHT.
INCLUDES
METAL OBJECTS. BUILT-IN
CABLE.
PATCH
ANTENNA
INCLUDED.
MOUNTING BRACKET.
SIGNALS FROM
METAL
OBJECTS.
BUILT-IN
TEST
MOUNTING BRACKET. TEST LIGHT.
LIGHT.
844 SYSTEMS AND COMPONENTS
PART NO.
844E-KIT
90-50017
16-40007
90-02169
16-40004
90-02386
90-50230
57-10096
57-10068
57-10078
90-02476
35-02099
www.sprayland.com
DESCRIPTION
844 CONTROL SYSTEM
844 CORE KIT
WHEEL SENSOR KIT
RADAR SPEED SENSOR
PROXIMITY SENSOR
GPS SPEED SENSOR
801 FLOW METER 1” BARBS
STANDARD FLOW METER ¾” BARBS
STANDARD FLOW METER 1” BARBS
RAPID CHECK FLOW METER 1” BARBS
PRESSURE TRANSDUCER 0- 145 PSI
1 “ NPT REGULATING VALVE
PAGE 51
WT
19
12
3
3
1
1
1
1
1
2
1
3
TEEJET
LIST
$ 2187.06
1494.67
156.31
707.70
94.51
476.56
458.15
565.57
497.20
591.60
287.65
231.24
CATALOG
PRICE
$ 1670.00
1120.00
125.00
565.00
75.00
380.00
365.00
450.00
395.00
470.00
230.00
185.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRONIC FLOW MONITORING
POLY REGULATING VALVE
NH3 REGULATING VALVE
POLYPROPYLENE CONSTRUCTION, 1" NPT OR 1½”
NPT PORTS, FLANGED ENDS, HIGH TORQUE 12
VOLT ELECTRIC MOTOR. 175 PSI RATED. FOR USE
WITH CHEMICALS AND LIQUID FERTILIZER.
PART NO.
063-0172-125
063-0171-894
DESCRIPTION
1" BUTTERFLY VALVE
1½" BUTTERFLY VALVE
LIST
PRICE
$ 512.00
610.00
CATALOG
PRICE
$ 370.00
405.00
POLY FLOW METERS
DESCRIPTION
POLY FLOW METER
LIST
PRICE
$ 719.00
CATALOG
PRICE
$ 520.00
WHEEL SPEED SENSOR
DESCRIPTION
WHEEL SENSOR KIT
PART NO.
03N31GM
113265-1
DESCRIPTION
FLOW METER
REMOTE KIT
www.sprayland.com
CATALOG
PRICE
$ 675.00
RFM66A
NICKEL PLATED CAST IRON CONSTRUCTION,
1¼" MPT INLET 1" FPT OUTLET. 300 PSI, 1-55
GPM RATED. FOR USE WITH CHEMICALS,
FERTILIZER, AND NH3.
PART NO.
063-0171-666
DESCRIPTION
FLOW METER
CATALOG
PRICE
$ 845.00
LIST
PRICE
$ 1107.00
LIST
PRICE
$ 649.00
CATALOG
PRICE
$ 415.00
MEASURES TRUE GROUND SPEED. READS
FRONT AND BACK THEN AVERAGES THE TWO
FOR VERY ACCURATE SPEED READINGS.
(INTERFACE CABLES AVAILABLE FOR EXISTING RADAR. CALL US
FOR PRICES FOR YOUR RADAR SYSTEM)
PART NO.
063-0159-836
DESCRIPTION
RADAR GUN W/ ADAPTER CABLE AND HARDWARE
INLINE FLOW METER
®
LIST
PRICE
$ 874.00
DESCRIPTION
CONTROL VALVE
RADAR SPEED SENSOR
WHEEL DRIVE SENSOR WITH
MAGNETS THAT MOUNT ON A NONDRIVEN WHEEL OF THE VEHICLE OR
SPRAYER WHEEL TO MEASURE
GROUND SPEED. KIT INCLUDES
SENSOR, 21 FT. CABLE, AND 4
MAGNETS.
PART NO.
063-0159-484
PART NO.
063-0172-168
NH3 FLOW METER
RFM60P
POLYPROPYLENE CONSTRUCTION, 1½" FPT AND 3”
FLANGED INLET AND OUTLET, 175 PSI, 1-55 GPM
RATED. FOR USE WITH CHEMICALS AND LIQUID
FERTILIZER.
PART NO.
063-0171-793
CARBON STEEL CONSTRUCTION,
1" NPT PORTS, HIGH TORQUE 12
VOLT ELECTRIC MOTOR. 300 PSI
RATED. FOR USE WITH NH3.
CATALOG
PRICE
$ 385.00
225.00
PAGE 52
CATALOG
PRICE
$ 865.00
INLINE FLOW METER
FLOW METER WITH LCD DISPLAY IN A
COMPACT SIZE THAT IS IDEAL FOR USE
INLINE TO MEASURE FLOW RATES FOR
PRECISE KNOWLEDGE OF MATERIAL
BEING APPLIED. DISPLAYS BATCH
AMOUNTS, CUMULATIVE VOLUME, AND
CAN BE FIELD CALIBRATED FOR DIFFERENT FLUID VISCOSITIES. 1” NPT INLET/
OUTLET, NYLON BODY, AND POWERED
BY LITHIUM BATERIES. 3 TO 50 GPM. 150
PSI MAX PRESSURE. SHIP WEIGHT 1 LB.
LIST
PRICE
$ 410.00
266.00
LIST
PRICE
$ 1202.00
FLOW METER WITH LARGE LCD DISPLAY, +/.5% ACCURACY FOR PRECISE KNOWLEDGE
OF MATERIAL BEING TRANSFERED. SIMPLE
CALIBRATION STEPS. 1” NPT INLET/OUTLET,
NYLON BODY, AND POWERED BY LONG LIFE
LITHIUM BATERIES. 120 PSI, 20 GPM MAX.
SHIP WEIGHT 1 LB.
PART NO.
FM-1100i
DESCRIPTION
FLOW METER
LIST
PRICE
$ 333.00
CATALOG
PRICE
$ 240.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRIC SPRAY CONTROLS
TIR SPRAYER CONTROLS ARE DESIGNED TO GIVE THE SPRAYER OPERATOR
COMPLETE CONTROL OF PRESSURE AND BOOM SHUT-DOWN FROM THE TRACTOR.
QUICK CONNECT HARNESS FOR EASY HOOK-UP TO THE SPRAYER. FEATURES INCLUDE
6 FT. CAB HARNESS, 8 FT. SPRAYER HARNESS, 0-100 PSI GAUGE IN CONSOLE, MASTER
SWITCH, BOOM SWITCH(S), AND PRESSURE CONTROL VALVE. FOR 12 VOLT SYSTEMS.
RC-1B CONSOLE
RC-10 CONSOLE
PART NO.
DESCRIPTION
RC-10N CAB CONSOLE,BUTTERFLY VALVE, CABLES (1 SECTION CONTROL)
RC-1B CAB CONSOLE,BUTTERFLY VALVE, CABLES (3 SECTION CONTROL)
1231
15 FT. EXTENSION CABLE FOR RC-1B
1181
REPLACEMENT TUBE FITTING FOR PRESSURE LINE
1182
REPLACEMENT TUBE UNION FOR PRESSURE LINE
0909
1/16" URETHANE TUBING FOR PRESSURE LINE (PER FOOT)
CATALOG
PRICE
$ 215.00
266.00
60.00
2.55
3.65
.30
T.I.R.
LIST
$ 306.36
380.09
86.10
3.19
4.60
.40
WT
4
5
1
COMPLETE SYSTEMS
RC-10N-1
RC-1B-2
1 SECTION CONTROL. ONE
SOLENOID VALVE, CAB CONTROL,
PRESSURE VALVE, AND CABLES.
SHIP WT. 5 LBS
2 SECTION CONTROL. TWO
SOLENOID VALVES, CAB CONTROL,
PRESSURE VALVE, AND CABLES.
SHIP WT. 8 LBS.
RC-1B-3
3 SECTION CONTROL. THREE
SOLENOID VALVES, CAB CONTROL,
PRESSURE VALVE, AND CABLES.
SHIP WT. 10 LBS
TIR LIST
$ 420.07
TIR LIST
$ 607.74
TIR LIST
$ 720.99
CATALOG PRICE
CATALOG PRICE
CATALOG PRICE
$ 295.00
$ 505.00
$ 425.00
4 AND 5 SECTION CONTROLS AVAILABLE BY SPECIAL ORDER
THE 744A ELECTRIC CONTROL FEATURES HEAVY-DUTY ELECTRICAL COMPONENTS,
PRINTED CIRCUIT BOARD, LIQUID FILLED LIGHTED GAUGE, PRESSURE CONTROL
SWITCH, THREE ROCKER BOOM SWITCHES (5 SECTION AVAILABLE), AND MASTER
SWITCH. THE 744A CAN CONTROL EITHER SOLENOID OR BALL VALVE BOOM VALVES.
THE COMPLETE 744A CONTROL SYSTEM INCLUDES THE CONSOLE, CABLES, PRESSURE
CONTROL VALVE, AND THREE 144A SOLENOID VALVES.
PART NO.
744A-100L-30S
744A-100L-33S
ORDER NO.
90-50161
90-50163
DESCRIPTION
SPRAYER CONTROL w/CABLES& REGULATOR
COMPLETE 3 SECTION BOOM CONTROL
21720-15
45-20079
EXTENSION CABLE
www.sprayland.com
PAGE 53
WT
4
9
1
TEEJET
LIST
$ 336.55
539.33
80.33
CATALOG
PRICE
$ 265.00
405.00
64.25
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
HOSE CLAMPS & FLANGES
HOSE CLAMPS
T BOLT HOSE CLAMPS
ALL STAINLESS STEEL CONSTRUCTION (BAND-201 SS,
SCREW 400 SS). MINI CLAMPS HAVE 5/16" BAND
WIDTH, STANDARD HAVE 1/2" BAND WIDTH.
PART NO.
5004 (MINI)
5005 (MINI)
5010M (MINI)
5006
5010
5012
5016
5020
5028
5036
5040
5048
5064
5088
CLAMP RANGE O.D.
MIN.
MAX
1/4"
5/8"
1/2"
7/8"
1/2"
1 1/6"
7/16"
13/16"
9/16"
1 1/6"
11/16"
1 1/4"
3/4"
1 1/2"
13/16"
1 3/4"
1 1/4"
2 1/4"
1 1/2"
2 3/4"
1 3/4"
3"
2 1/4"
3 1/2"
3 1/4"
4 1/2"
4 3/4"
6"
HEAVY DUTY CLAMP. STAINLESS
STEEL BAND AND BOLT.
CATALOG
PRICE
$ .60
.60
.70
.75
.80
.80
1.00
1.00
1.00
1.20
1.40
1.45
1.80
2.25
LIST
PRICE
$ .64
.65
.89
1.01
.93
.91
1.23
1.23
1.25
1.39
1.67
1.73
2.17
2.79
PART NO.
5024A
5032A
5032B
5032C
5032D
CLAMP RANGE O.D.
MIN.
MAX
2 5/16"
2 5/8"
2 5/16"
2 5/8"
2 1/2"
2 13/16"
2 7/8"
3 5/8"
3 7/16”
3 13/16”
LIST
PRICE
$ 10.70
9.54
11..07
12.23
11.62
CATALOG
PRICE
$ 6.40
6.30
7.30
8.00
7.60
FLANGE FITTINGS
MALE THREADED FLANGES
PART NO.
CP48172-PP
CP48155-PP
CP48156-PP
CP48165-PP
CP48166-PP
FEMALE THREADED FLANGES
TEEJET CATALOG
DESCRIPTION
LIST
PRICE
3/4” MPT-50 SERIES $ 2.40
$ 1.80
1” MPT-50 SERIES
2.40
1.80
1 1/2” MPT-50 SERIES 2.58
1.95
1 1/4” MPT-75 SERIES 4.91
3.70
1 1/2” MPT-75 SERIES 4.91
3.70
STRAIGHT HOSE BARB FLANGES
PART NO.
CP48150-PP
CP45504-PP
CP45505-PP
CP45506-PP
CP48160-PP
CP46067-PP
DESCRIPTION
3/4” MPT-50 SERIES
1” MPT-50 SERIES
1 1/4” MPT-50 SERIES
1 1/2” MPT-50 SERIES
1 1/4” MPT-75 SERIES
1 1/2” MPT-75 SERIES
TEEJET CATALOG
LIST
PRICE
$ 2.06
$ 1.55
2.06
1.55
2.06
1.55
2.34
1.75
5.55
4.15
5.55
4.15
90º FLANGE COUPLING
PART NO.
CP48158-PP
CP48168-PP
DESCRIPTION
50 SERIES
75 SERIES
PART NO.
CP48154-PP
CP45512-PP
CP46066-PP
CP48164-PP
90° HOSE BARB FLANGES
PART NO.
CP48151-PP
CP48152-PP
CP48162-PP
CP48163-PP
CP48164-PP
TEEJET CATALOG
DESCRIPTION
LIST
PRICE
3/4” BARB-50 SERIES $ 2.55
$ 1.90
1” BARB-50 SERIES
2.55
1.90
1 1/4” BARB-75 SERIES 9.40
7.05
1 1/2” BARB-75 SERIES 9.40
7.05
2” BARB-75 SERIES
9.40
7.05
TEE FLANGE COUPLING
TEEJET CATALOG
LIST
PRICE
$ 6.87
$ 5.15
12.89
9.65
PART NO.
CP50193-PP
CP46716-PP
CP46717-PP
FLANGE CONNECTORS
DESCRIPTION
50 SERIES
75 SERIES
50/75 REDUCER
TEEJET CATALOG
LIST
PRICE
$ 13.85
$10.40
14.78
11.05
13.58
10.40
(CENTER FLANGE IS 2”)
CONNECTORS INCLUDE O-RING SEAL AND ARE REQUIRED
FOR EACH FLANGE CONNECTION.
TEEJET CATALOG
PART NO.
DESCRIPTION
LIST
PRICE
46024
50 SERIES-3 WAY
$ 22.87
$ 17.15
55245-50
50 SERIES-SS
11.89
8.90
55245-75
75 SERIES-SS
11.89
8.90
CP7717-2/222-VI O-RING ONLY-50
4.40
3.30
CP7717-2-229-VI O-RING ONLY-75
1.69
1.30
50 SERIES FLANGES HAVE A 2” DIA. FACE AND RATED TO 300 PSI MAX.
75 SERIES FLANGES HAVE A 3 1/6” DIA. FACE AND RATED TO 200 PSI MAX.
THESE FLANGES INTERCHANGE WITH BANJO FLANGE FITTINGS.
www.sprayland.com
TEEJET CATALOG
DESCRIPTION
LIST
PRICE
1” FPT-50 SERIES
$ 2.40
$ 1.80
1 1/4” FPT-50 SERIES 2.69
2.00
1 1/2” FPT-75 SERIES 6.70
5.00
2” FPT-75 SERIES
9.40
7.05
PAGE 54
PLUG AND GAGE PORT FLANGES
PART NO.
CP45507-PP
CP45508-1/4-PP
CP46069-PP
CP46127-1/4-PP
TEEJET CATALOG
DESCRIPTION
LIST
PRICE
50 SERIES-PLUG
$ 2.40
$ 1.90
50 SERIES-GAUGE PORT 2.69
2.00
75 SERIES-PLUG
5.55
4.15
75 SERIES-GAUGE PORT 6.70
5.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
BOOM CONTROL VALVES
DIRECTOVALVE® ELECTRIC SOLENOID VALVES
344 DIRECTOVALVE® ELECTRIC BALL VALVES
ALMOST MAINTENANCE FREE SPRAY BOOM CONTROL.
WORKS WITH ALL SPRAYER CONTROLS. DESIGNED FOR
HIGHER VOLUME AND PRESSURE APPLICATIONS. 300 PSI, 27
GPM MAX RATINGS. 12 VOLT, 0.8 SECOND RESPONSE TIME.
NEW MOTOR DESIGN. AVAILABLE IN ¾" AND 1" NPT, 2 OR 3
WAY VALVES. SHIP WT. 3 LBS
TEEJET
CATALOG
PART NO.
LIST
PRICE
344BEC-23-C
¾” 2-WAY VALVE $ 326.57
$ 195.00
344BEC-24-C
1” 2-WAY VALVE
326.57
195.00
344BEC-2F-C
FLANGED-2 WAY
326.57
195.00
344BEC-33-C
¾” 3-WAY VALVE
399.68
240.00
344BEC-34-C
1” 3-WAY VALVE
399.68
240.00
DESIGNED FOR REMOTE ON-OFF CONTROL OF SPRAY BOOMS.
POLYPROPYLENE BODY, STAINLESS STEEL WETTED PARTS.
EPDM SEALS STANDARD (VITON SEALS OPTIONAL). 12 VOLT DC.
VALVES CAN BE STACKED TOGETHER. 100 PSI MAX
*
1, 2, OR 3 VALVE STACK
INLET
NPT
¾"
¾"
¾"
PART NO.
AA144A-1*
AA144A-2*
AA144A-3*
OUTLET
NPT
½"
½"
½"
GPM
10
20
30
3-WAY DIRECTO VALVES
AA144A-1-3
FOR BOOM CONTROL
AA144F-1-3
FOR FOAM MARKERS
CATALOG
PRICE
$ 98.00
198.00
297.00
TEEJET
LIST
$ 169.94
330.44
495.94
WT
2
4
6
TEEJET
$224.43
180.80
CATALOG
$ 145.00
120.00
2500 SERIES ELECTRIC VALVES
THIS BOOM CONTROL HAS A NYLON BODY, STAINLESS
STEEL WETTED PARTS, AND VITON SEALS STANDARD.
VALVES CAN BE STACKED TOGETHER BY THREADING ONE
VALVE INTO THE OTHER. ¾" FPT INLET, ¾" MPT BYPASS,½"
FPT OUTLET. 100 PSI, 10 GPM MAX. 12 VOLT DC, 1.7 AMPS.
SHIP WT. 1 LB
PART NO.
2500B-1
SOLENOID VALVE
CATALOG
PRICE
$ 84.00
T.I.R.
LIST
$ 112.69
DIRECTOVALVE® MANUAL VALVE
FOR MANUALLY OPERATING A SINGLE BOOM LINE. CAN BE
ATTACHED TO TWO OR MORE FOR MULTIPLE BOOM
SECTION CONTROL. POLYPROPYLENE BODY AND HANDLE,
STAINLESS STEEL AND POLYETHYLENE WETTED PARTS. ¾"
NPT INLETS, ½" OUTLET, ¼" NPT GAUGE PORT. 150 PSI, 12
GMP MAX.
PART NO.
AA6B
MANUAL VALVE
440B DIRECTOVALVE®
ELECTRIC MANIFOLDED
BALL VALVES
THE MANIFOLDED 440
DIRECTOVALVES PROVIDE A
COMPACT DESIGN FOR BOOM
CONTROL. 300 PSI, 26 GPM PER
VALVE MAX 1" NPT INLET & OUTLET.
AVAILABLE WITH POLYPROPYLENE
OR STAINLESS STEEL (-S) BALL.
PART NO.
441BEC
442BEC
443BEC
444BEC
445BEC
441BEC-S
442BEC-S
443BEC-S
444BEC-S
445BEC-S
ELECTRIC BALL VALVE
www.sprayland.com
LIST
$ 840.00
CATALOG
PRICE
$ 245.00
475.00
705.00
935.00
1165.00
295.00
575.00
860.00
1145.00
1425.00
450B DIRECTOVALVE®
ELECTRIC MANIFOLDED
BALL VALVES
FLANGED MANIFOLDED DESIGN
ALLOWS YOU TO ASSEMBLE AS MANY
VALVES TOGETHER AS YOU NEED.
200 PSI, 32 GPM PER VALVE MAX
RATINGS. TRUNNION BALL, CARBON/
TEFLON SEATS, AND SEALED MOTOR
HEAD CASE FOR LONG LIFE. FLANGE
INLET/OUTLET OPTIONS INCLUDE
HOSE BARBED, OR MALE AND FEMALE PIPE THREAD FITTINGS. SPECIFY
WHICH FLANGES YOU NEED WHEN ORDERING (SEE PAGE 50).
inc.
2” FULL PORT BALL VALVE, POLY BODY, STAINLESS
BALL. 12 VOLT, 3 SEC. RESPONSE, 100 PSI 376 GPM MAX
RATINGS.
PART NO.
F2I22-10DY0-P01
TEEJET
LIST
$ 407.60
788.20
1173.73
1556.73
1938.13
494.46
961.92
1434.34
1904.36
2372.38
DESIGNED FOR HIGHER VOLUME APPLICATIONS. INTERNAL
RESETTABLE FUSE, SEALED MOTOR, 3/4 SECOND
RESPONSE TIME. 150 PSI, 85 GPM MAX RATINGS.
SHIP WT. 3 LBS
TEEJET
CATALOG
PART NO.
LIST
PRICE
346BEC-25-C
1¼” NPT VALVE $ 609.14
$ 365.00
346BEC-26-C
1½” NPT VALVE
609.14
365.00
TEEVALVE® MANUAL CONTROL VALVE
MANUAL 3 SECTION BOOM CONTROL TO OPEN ANY OF THE
BOOM SECTIONS BY ROTATING THE
HANDLE TO THE DESIRED POSITION. RAISE
THE LEVER TO OPEN AND LOWER TO CLOSE.
ALUMINUM BODY, STAINLESS AND NYLON WETTED
PARTS. (3) ¾" NPT INLETS, (3) ½" NPT OUTLETS. ¼" GAUGE
PORT. SHIP WT. 5 LBS.
TEEJET
CATALOG
PART NO.
LIST
PRICE
AA17Y
MANUAL VALVE
$ 137.76
$ 96.50
WT
9
12
15
18
21
9
12
15
18
21
346 DIRECTOVALVE® ELECTRIC BALL VALVES
CATALOG
PRICE
$ 37.95
TEEJET
LIST
$ 54.24
DESCRIPTION
1 MANIFOLDED VALVE
2 MANIFOLDED VALVES
3 MANIFOLDED VALVES
4 MANIFOLDED VALVES
5 MANIFOLDED VALVES
1 MANIFOLDED VALVE
2 MANIFOLDED VALVES
3 MANIFOLDED VALVES
4 MANIFOLDED VALVES
5 MANIFOLDED VALVES
PART NO.
451BEC-2F-C
452BEC-2F-C
453BEC-2F-C
454BEC-2F-C
455BEC-2F-C
CATALOG
PRICE
$ 386.00
PAGE 55
DESCRIPTION
1 MANIFOLDED VALVES
2 MANIFOLDED VALVES
3 MANIFOLDED VALVES
4 MANIFOLDED VALVES
5 MANIFOLDED VALVES
WT
5
10
15
20
25
TEEJET
LIST
$ 325.86
672.15
1018.57
1349.61
1727.00
CATALOG
PRICE
$ 195.00
405.00
610.00
810.00
1040.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE RELIEF & CONTROL VALVES
PISTON TYPE RELIEF VALVE-BRASS
PISTON TYPE RELIEF VALVE-POLY
POLYPROPYLENE BODY WITH STAINLESS STEEL SPRING
PROVIDES EXCELLENT CHEMICAL RESISTANCE. CHOICE OF ½"
OR ¾" NPT INLET AND OUTLET PORTS. LOCKNUT TO HOLD
PRESSURE IN PLACE.
PART NO.
23120-½-PP
23120-¾-PP
23120-½-PP-60
23120-¾-PP-60
NPT
SIZE
½" NPT
¾" NPT
½" NPT
¾" NPT
MAX
PSI
150
150
60
60
TEEJET
LIST
$ 36.72
36.72
36.72
36.72
BRASS BODY, STAINLESS STEEL SPRING. COMMONLY
USED ON COMMERCIAL CARPET CLEANING MACHINES.
REMOVABLE BONNETFOR SERVICE WITHOUT
REMOVING VALVE FROM LINE. ¼" NPT PORTS, 700 PSI
MAX.
CATALOG
PRICE
$ 25.75
25.75
25.75
25.75
LIST
PRICE
$ 58.91
PART NO.
AA110-¼-700
CATALOG
PRICE
$ 44.00
RELIEF VALVE
DIAPHRAGM TYPE RELIEF VALVE
RELIEF VALVE USED FOR HIGH VOLUME APPLICATIONS. BRASS
OR DUCTILE IRON CONSTRUCTION. ADJUSTMENT LOCKNUT,
150 PSI MAX. SHIP WT. 5 LBS
THIS PRESSURE RELIEF VALVE IS GREAT FOR
REGULATING LARGE VOLUME OF SOLUTIONS. NYLON INLET
BODY WITH ALUMINUM BONNET, AND CHEMICAL RESISTANT
DIAPHRAGM. YOUR CHOICE OF ½" OR ¾" NPT SIZES. SHIP WT. 2
LBS
PART NO.
8460-½-NYB
8460-¾-NYB
NPT
SIZE
½" NPT
¾" NPT
MAX
PSI
300
300
TEEJET
LIST
$ 67.43
67.43
PART NO.
AA110-1 ¼
AA110-1 ¼-DI
AA110-1 ½
AA110-1 ½-DI
CATALOG
PRICE
$ 50.00
50.00
NPT
SIZE
1 ¼"
1 ¼"
1 ½"
1 ½"
MATERIAL
BRASS
D. IRON
BRASS
D. IRON
TEEJET
LIST
$267.81
209.51
267.81
209.51
CATALOG
PRICE
$ 200.00
157.00
200.00
157.00
NYLON PRESSURE RELIEF VALVE
THROTTLING VALVE
FOR REGULATING FLOW ON SYSTEMS WITH
CENTRIFUGAL PUMPS. LOCKNUT TO HOLD PRESSURE IN PLACE.
POLYPROPYLENE BODY FOR CHEMICAL RESISTANCE, 150 PSI
MAX.
PART NO.
23520-½-PP
23520-½-PP
NPT
SIZE
½" NPT
¾" NPT
MAX
PSI
150
150
DURABLE RELIEF VALVE. NYLON BODY, STAINLESS STEEL BALL,
ADJUSTMENT LOCKNUT, ¾" NPT.
CATALOG
PRICE
$ 23.75
23.75
TEEJET
LIST
$ 31.83
31.83
PART NO.
3300-0015
3300-0016
PART NO.
1560A
1541B
T.I.R.
LIST
$ 129.47
147.93
CATALOG
PRICE
$ 90.00
103.50
PART NO.
35-02099
ELECTRIC PRESSURE REGULATOR
www.sprayland.com
NPT
SIZE
¾" NPT
MAX
PSI
100
TEEJET
LIST
$ 164.25
GPM
32
NPT
SIZE
1" NPT
TEEJET
LIST
$ 234.24
CATALOG
PRICE
$ 185.00
ELECTRIC REGULATING VALVE
THIS BUTTERFLY REGULATING VALVE IS USED FOR REMOTE
PRESSURE CONTROL. STAINLESS STEEL BUTTERFLY,
NYLON BODY, LOW CURRENT DRAW. 12 VOLT, 45 GPM MAX.
SHIP WT. 2 LBS
PART NO.
AA244C-¾
CATALOG
PRICE
$ 25.50
25.50
LIST
PRICE
$ 32.00
32.00
12 VOLT 1 AM POWERED. NYLON, TEFLON,
POLYPROPYLENE, AND VITON PARTS. 32 GPM MAX FLOW,
300 PSI MAX. SHIP WT. 3 LBS
THIS BUTTERFLY VALVE CAN BE USED AS EITHER A BYPASS
OR THROTTLING VALVE. NYLON BODY, STAINLESS STEEL
BUTTERFLY, AND VITON SEAL. 12 VOLT
MAX
PSI
150
150
MAX
PSI
150
250
ELECTRIC REGULATING BALL VALVE
ELECTRIC PRESSURE REGULATOR
NPT
SIZE
¾" NPT
1" NPT
NPT
SIZE
¾"
¾"
CATALOG
PRICE
$ 115.00
PAGE 56
12 VOLT, NYLON, POLYPROPYLENE, AND VITON PARTS.
175 PSI MAX. FREQUENTLY USED ON ELECTRONIC
MONITORS. SHIP WT. 3 LBS
PART NO.
063-0172-125
063-0171-894
NPT
SIZE
1" NPT
1 ½” NPT
LIST
PRICE
$ 512.00
610.00
CATALOG
PRICE
$ 370.00
405.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY GUNS
GUNJET 2 BRASS
GUNJET 12A
GUNJET 143-AL ALUMINUM
GUNJET 18-AL ALUMINUM
THESE SPRAY GUNS ARE DESIGNED FOR SPRAYING FENCE LINES, TREES, LIVESTOCK, TURF, AND MANY OTHER APPLICATIONS.
TO OPERATE THE GUN, THE HANDLE IS ROTATED 360º FROM SHUT-OFF TO MAXIMUM FLOW. THE SPRAY PATTERN IS ADJUSTED
FROM HOLLOW CONE TO STRAIGHT STREAM BY TURNING THE HANDLE. CONSTRUCTED OF ALUMINUM WITH A STAINLESS SPRAY
DISC.
PART NO.
AA2
AA12A-10
AA143-AL-GH
AA18-AL6
MATERIAL
BRASS
BRASS
ALUMINUM
ALUMINUM
INLET
¾ GHT
¾ GHT
¾ GHT
¼ NPT
LENGTH
24"
16"
22"
19"
THIS SPRAY GUN IS MADE OF
POLYPROPYLENE FOR EXCELLENT
CHEMICAL RESISTANCE AND
LIGHTWEIGHT FOR LESS HAND
FATIGUE. FOR SPOT SPRAYING
AND MANY OTHER USES. 1/4" NPT
INLET, 11/16” NOZZLE THREAD
OUTLET, 150 PSI MAX. SHIP WT. 1
LB
SPRAYING
SYSTEMS LIST
$ 55.59
THIS TRIGGER SPRAY GUN IS ONE OF OUR
MOST POPULAR. USED FOR SPRAYING
LIVESTOCK , FENCE ROWS, ROADSIDES,
AND OTHER APPLICATIONS. BRASS, STEEL,
AND POLY CONSTRUCTION. MOLDED GRIP
CONTOURS TO THE HAND FOR LESS
FATIGUE. NOZZLE ADJUSTS FROM HOLLOW
CONE TO SOLID STREAM. 3/8" NPT INLET, 18"
WAND, 250 PSI MAX. SHIP WT 3 LBS.
CATALOG
PRICE
$ 38.90
DRIP-FREE SPRAY GUN
18” WAND
24" WAND
36" WAND
www.sprayland.com
SPRAYING
SYSTEMS LIST
$ 115.59
122.59
132.28
PART NO.
SL1500
V
HEA
T Y!
Y DU
CATALOG
PRICE
$ 46.25
LIST
$ 70.33
METERING SPRAY GUN
ALUMINUM TRIGGER GUN WITH BRASS EXTENSION
WAND. POSITIVE SHUT-OFF AT NOZZLE FOR DRIPFREE OPERATION MAKES IT EXCELLENT FOR USE
WITH CONTACT HERBICIDES OPERATES WITH MOST
TYPES OF SPRAY TIPS (NOT INCLUDED). SHIP WT. 1
LB.
PART NO.
23L-7676-18
23L-7676-24
23L-7676-36
CATALOG
PRICE
$ 131.00
81.00
67.75
59.95
SPRAYING
SYSTEMS LIST
$ 187.26
116.22
96.59
85.55
ADJUSTABLE TRIGGER GUN
TRIGGER GUN
PART NO.
AA30L-PP
WT
4 LBS
2 LBS
2 LBS
1 LB
CATALOG
PRICE
$ 80.90
85.75
92.50
PAGE 57
DESIGNED FOR PRECISION METERING OF CHEMICALS FOR LOW PRESSURE
APPLICATIONS. THE METERING ASSEMBLY CAN BE ADJUSTED FROM 1 TO
16 ML WITH A SINGLE PULL OF THE TRIGGER AND IS RECHARGED FOR THE
NEXT DOSE. ACCEPTS MOST SPRAY TIPS. 25 PSI MIN.CHARGE PRESSURE,
75 PSI MAX PRESSURE. ¼" NPT INLET. SHIP WT 1 LB
PART NO.
23624-30L-1/4
SPRAYING
SYSTEMS LIST
$ 154.35
CATALOG
PRICE
$ 108.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
LAWN AND TREE GUNS
LAWN SPRAY GUN
WIDELY USED IN THE TURF CARE INDUSTRY, THESE LAWN GUNS FEATURE COLOR-CODED SPRAY
TIPS FOR SIZE IDENTIFICATION. NOZZLE TIPS PROVIDE A 45º "SHOWER HEAD" SPRAY PATTERN.
THE TRIGGER IS LOCKABLE TO REDUCE HAND FATIGUE AND THE GUNS ARE EASILY REBUILDABLE.
OPTIONAL SWIVELS AND EXTENSIONS ARE AVAILABLE FOR SPOT SPRAYING. CONSTRUCTED OF
NYLON AND VITON AND THE MAX. PRESSURE IS 200 PSI.
SWIVEL
ADAPTER
15" OR 24" EXTENSION
OPTIONAL ACCESSORIES
PART NO.
25660-0
25660-*
CP25670-*-NY
25990-¾-NYB
25657-NYB
22665-15-PP
22665-24-PP
PK-AB25660
NOZZLE
*
DESCRIPTION
LAWN GUN WITHOUT NOZZLE
LAWN GUN WITH NOZZLE (SPECIFY SIZE)
NOZZLE (SPECIFY SIZE)
HOSE SHANK SWIVEL ADAPTER (1/2" OD BARB)
ADAPTER FOR TIPS & EXTENSIONS
15" EXTENSION WAND-POLYPROPYLENE
24" EXTENSION WAND-POLYPROPYLENE
LAWN GUN REPAIR KIT
S.S.
LIST
$ 91.61
104.61
14.73
13.51
23.05
11.91
19.83
19.60
CATALOG
PRICE
$ 64.00
73.00
10.95
10.15
16.15
8.35
13.90
14.70
JD9 LAWN SPRAY GUN
AND ACCESSORIES
THE JD9-C HEAVY DUTY SPRAY GUN IS RUGGED, REBUILDABLE, PRECISION BUILT, AND DESIGNED FOR
COMFORTABLE USE. QUICKLY AND EASILY ADJUSTS FROM A MISTING SPRAY TO A LONG DISTANCE STREAM
SPRAY. TRIGGER LOCK FOR CONTINUOUS SPRAYING; DRIP FREE SHUT-OFF. THERE ARE MANY CHOICES OF
TIPS AND NOZZLES, A ROOT FEEDER ATTACHMENT, AND ACCESSORY FITTINGS THAT ALLOW YOU TO USE
SPRAYING SYSTEMS WANDS AND NOZZLES. “CT” MODEL (NOT SHOWN) IS TAPPED FOR A PRESSURE GAUGE.
1000 PSI MAX.
PART NO.
38500
38501
38511
38919
38605
38604
38602
38637
38634
38633
DESCRIPTION
JD9-C GUN WITH NOZZLE
JD9-CT GUN WITH NOZZLE
JD9 REPAIR KIT
ROOT FEEDER
1-3 GPM SPRAY TIP
2-5 GPM SPRAY TIP
3-8 GPM SPRAY TIP
1 GPM LAWN SPRAY TIP
2 GPM LAWN SPRAY TIP
4 GPM LAWN SPRAY TIP
WT
3
3
1
12
1
1
1
1
1
1
LIST
PRICE
$ 249.24
255.52
39.95
305.59
20.30
20.30
20.30
40.36
40.36
40.36
CATALOG
PRICE
$ 155.00
160.00
31.85
274.00
17.50
17.50
17.50
32.45
32.45
32.45
JD9C
SPRAY GUN
SPRAY TIP
LAWN
SPRAY TIP
ROOT
FEEDER
WAND ADAPTER
TO FIT TEEJET
WANDS (P. 54)
LAWN AND TREE GUNS
3381-0010
&
3381-0011
3381-0013
THESE SPRAY GUNS ARE EXCELLENT FOR CHEMICAL APPLICATIONS FOR LAWNS, ROADSIDE MAINTENANCE,
TREES, AND SHRUBS. CONSTRUCTED OF STAINLESS STEEL, ALUMINUM, AND BRASS, THESE GUNS ARE VERY
DURABLE. 1/2" HOSE BARB INLET REMOVES FOR 1/2" NPT INLET. 1200 PSI MAX. PRESSURE.
PART NO.
3381-0013
3381-0010
3381-0011
3385-**00
www.sprayland.com
BARREL
MAX
LENGTH
GPM
7"
25
17"
25
21"
30
NOZZLE (**SPECIFY SIZE)
SHIP
WT
2 LBS
5 LBS
5 LBS
HYPRO
LIST
$ 179.00
227.00
300.00
24.25
PAGE 58
CATALOG
PRICE
$ 154.00
175.00
225.00
18.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPOT GUNS & ACCESSORIES
BRASS TRIGGER VALVES
BRASS HAND VALVES USED FOR SPOT SPRAYING AND OTHER APPLICATIONS BY USING
SPRAY NOZZLES, EXTENSIONS AND HANDLES SHOWN ON THIS PAGE.
MODEL 4688
1/4" FPT INLET, 11/16" NOZZLE THREAD
OUTLET WITH TRIGGER LOCK. 250 PSI, 2 GPM
MAX. RATINGS.
TEEJET
CATALOG
PART NO.
PRICE
PRICE
4688
$ 50.24
$ 37.50
VALVE HANDLES TO FIT GUN INLETS
SHOWN ABOVE.
MODEL 6466
SAME AS THE 4688 EXCEPT WITHOUT TRIGGER
LOCK AND HAS A LONGER HANDLE.
PART NO.
6466
TEEJET
PRICE
$ 54.16
CATALOG
PRICE
$ 40.50
BRASS WAND EXTENSIONS
11/16" FEMALE NOZZLE THREAD INLET, 11/16" MALE THREAD OUTLET.
4727 HANDLE
BRASS BODY WITH RUBBER
GRIP, ¼" MPT INLET.
STRAIGHT
4754 HANDLE
BRASS BODY WITH RUBBER COVER,
FEMALE GARDEN HOSE INLET.
TEEJET LIST
$ 12.66
TEEJET LIST
$ 17.02
CATALOG PRICE
CATALOG PRICE
$ 9.25
$ 12.75
22650-PP
THIS TRIGGER GUN IS LIGHTWEIGHT AND
OFFERS EXCELLENT CHEMICAL RESISTANCE.
TRIGGER LOCK FOR LESS HAND FATIGUE.
CONSTRUCTED OF POLYPROPYLENE AND
VITON DIAPHRAGM,ACCEPTS MOST SPRAY
TIPS AND HAS A ¼" NPT INLET. 150 PSI MAX.
22570-PP
COMBINES THE 22650 TRIGGER GUN WITH A POLYPROPYLENE WAND
EXTENSION AND SPRAY TIPS.
TEEJET
LIST
$ 29.50
41.99
48.91
46.63
53.75
CATALOG
PRICE
$ 20.50
29.50
34.25
32.50
37.50
ECONOMY SPOT GUN
TEEJET
LIST
$12.62
15.90
17.17
20.60
21.73
26.33
CATALOG
PRICE
$ 9.45
11.90
12.85
15.45
16.30
19.75
PART NO.
6671-8
6671-18
6671-24
6671-30
6671-36
6671-48
LENGTH
8"
18"
24"
30"
36"
48"
TEEJET
LIST
$ 14.75
17.98
18.57
21.00
23.90
27.64
CATALOG
PRICE
$ 11.05
13.50
13.90
15.75
17.95
20.75
POLYPROPYLENE WAND EXTENSIONS
FITS TRIGGER GUN LISTED AT LEFT AND TEEJET® LAWN GUN.
MADE OF POLYPROPYLENE WITH VITON O-RINGS. 11/16" FEMALE NOZZLE
THREADS, INCLUDES STRAIGHT AND 45º ANGLE ADAPTERS.
PART NO.
22665-15-PP
22665-24-PP
TEEJET
LIST
$ 11.91
19.83
LENGTH
15"
24"
CATALOG
PRICE
$ 8.35
13.90
ADJUSTABLE CONE
50800-PP
LIGHTWEIGHT SPRAY GUN FOR USE WITH BACKPACK, CANISTER, AND
LOW PRESSURE SPOT SPRAYERS. 15" WAND, TRIGGER LOCK, 3/8" HOSE
BARB, CHOICE OF X8, X12, OR X18 ADJUSTABLE CONE TIP
(WITH 30º ANGLE OFFSET).
TEEJET
CATALOG
PART NO.
DESCRIPTION
LIST
PRICE
50800-PP-*
TRIGGER GUN (*SPECIFY TIP)
$ 17.02
$ 11.95
www.sprayland.com
LENGTH
8"
18"
24"
30"
36"
48"
CURVED
POLYPROPYLENE TRIGGER GUNS
PART NO.
DESCRIPTION
22650-PP
TRIGGER GUN
22570-PP-15
TRIGGER GUN w/15" EXT.
22570-PP-24
TRIGGER GUN w/24" EXT.
22670-PP-15-** GUN w/15" EXT. & POLY TIP
22670-PP-24-** GUN w/24" EXT. & POLY TIP
PART NO.
7715-8
7715-18
7715-24
7715-30
7715-36
7715-48
PAGE 59
5500
5500-PPB
38720-PPB
THESE TIPS CAN BE ADJUSTED FROM A WIDE ANGLE FINE SPRAY CONE TO A
STRAIGHT STREAM BY ROTATING THE TIP BODY (**SPECIFY TIP SIZE).
PART NO.
5500-X**
5500-PPB-X**
38720-PPB-X**
DESCRIPTION
BRASS TIP
POLYPROPYLENE TIP
POLYPROPYLENE TIP
TEEJET
LIST
$ 20.60
9.37
6.92
CATALOG
PRICE
$ 15.55
7.00
5.20
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE WASHERS
1300 PSI HOBBY WASHER
THIS COMPACT HOBBY WASHER IS GREAT FOR RESIDENTIAL USE. SOME USES ARE
WASHING YOUR CAR, LAWN MOWER, DECK, AND HOUSE SIDING. IT COMES WITH 30
FT. PRESSURE HOSE, TRIGGER SHUT-OFF, 2 HP MOTOR, ANNOVI AXIAL PLUNGER
PUMP, AND SOAP INJECTION. 1300 PSI, 2.0 GPM, 115 VOLT. SHIP WT. 62 LBS.
MODEL NO.
1302E
LIST
PRICE
$ 779.00
CATALOG
PRICE
$ 610.00
ELECTRIC 750 PSI WASHER
A POPULAR PRESSURE WASHER FOR GENERAL DUTY PRESSURE CLEANING. DESIGNED
FOR RESIDENTIAL, SMALL FARM OPERATIONS, CAR LOTS ETC. 750 PSI, 3 GPM, 115 VOLT.
ANNOVI INDUSTRIAL PLUNGER PUMP, 1½ HP MOTOR, 30 FT. PRESSURE HOSE, TRIGGER
SHUT-OFF, SOAP INJECTION. SHIP WT. 72 LBS.
LIST
PRICE
$ 818.00
MODEL NO.
753ES
CATALOG
PRICE
$ 670.00
2200 PSI WASHER WITH 200CC GAS ENGINE
THIS PRESSURE WASHER IS DESIGNED FOR AFFORDABLE GENERAL DUTY PRESSURE
CLEANING FOR RESIDENTIAL USE. 2200 PSI, 2.5 GPM. ANNOVI TRIPLEX AXIAL PUMP, 30
FT. PRESSURE HOSE, TRIGGER SHUT-OFF, SOAP INJECTION, AND CART. SHIP WT. 62
LBS.
MODEL NO.
2202C
LIST
PRICE
$ 885.00
CATALOG
PRICE
$ 505.00
1500 PSI WASHER WITH 160CC HONDA “GC” SERIES ENGINE
THIS PRESSURE WASHER IS DESIGNED FOR AFFORDABLE GENERAL DUTY PRESSURE
CLEANING. FOR RESIDENTIAL, SMALL FARM OPERATIONS, ETC. 1500 PSI, 3 GPM .
ANNOVI TRIPLEX PLUNGER PUMP, 30 FT. PRESSURE HOSE, TRIGGER SHUT-OFF, SOAP
INJECTION, AND ROLLS EASY ON LIGHTWEIGHT FRAME. SHIP WT. 69 LBS
MODEL NO.
1503GC
LIST
PRICE
$ 958.00
CATALOG
PRICE
$ 720.00
1700 PSI WASHER WITH “GX” SERIES HONDA ENGINE
POWERFUL 160CC HONDA GX SERIES ENGINE WITH OIL ALERT™ PROTECTION ,
OVERHEAD VALVE, AND EASY STARTING FOR MORE DEMANDING CLEANING JOBS.
1700 PSI, 3 GPM FOR EXCELLENT CLEANING ABILITY. INDUSTRIAL RATED PLUNGER
PUMP, 30 FT. PRESSURE HOSE, TRIGGER SHUT-OFF, AND SOAP INJECTION. ONE OF
OUR MOST POPULAR WASHERS. SHIP WT. 70 LBS
MODEL NO.
1703GX
www.sprayland.com
PAGE 60
LIST
PRICE
$ 1218.00
CATALOG
PRICE
$ 850.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE WASHERS
2000EA-SERIES
DESIGNED FOR LIGHT INDUSTRIAL USE, FARMING OPERATIONS, AND EQUIPMENT.
FEATURES INCLUDE TRIPLEX PLUNGER PUMP, 5 HP, 1 PH ELECTRIC MOTOR,
ADJUSTABLE PRESSURE CONTROL, GLYCERIN GAUGE, ADJUSTABLE NOZZLE, 50 FT
PRESSURE HOSE, AND SOAP INJECTION. TRIGGER SHUT-OFF WITH INSULATED WAND.
HANDLE AND BASE ARE POWDER PAINTED, STEEL HUB PNEUMATIC WHEELS. THREE
PHASE MODELS AVAILABLE.
MODEL NO.
2040EA
2540EA
PSI
2000
2500
GPM
4.0
4.0
HP
5
7.5
LIST
PRICE
$ 2105.00
2235.00
WT
140
205
CATALOG
PRICE
$ 1540.00
1675.00
2000GA-SERIES
THE 2040 GAS ENGINE WASHER IS BOASTS A LOT OF POWER IN A COMPACT DESIGN AND
WILL DO A GREAT JOB REMOVING THE GRIME. HEAVY DUTY ANNOVI PLUNGER PUMP, 240CC
HONDA GX SERIES ENGINES WITH OIL ALERT™ PROTECTION, PRESSURE CONTROL WITH
GLYCERIN GAUGE, TRIGGER SHUT-OFF AND INSULATED WAND, ADJUSTABLE NOZZLE AND
CHEMICAL INJECTION. POWDER PAINTED FRAME, STEEL PNEUMATIC WHEELS.
MODEL NO.
2040GA
PSI
2000
GPM
4.0
WT
140
CATALOG
PRICE
$ 1565.00
LIST
PRICE
$ 2230.00
3000GA-SERIES
THE G SERIES PRESSURE WASHERS ARE COMMERCIAL DUTY AND POPULAR FOR THEIR
PORTABILITY AND WILL REMOVE THE MOST STUBBORN GREASE AND DIRT. ANNOVI PLUNGER
PUMP, 340CC HONDA GX SERIES ENGINE WITH OIL ALERT™ PROTECTION, PRESSURE
CONTROL WITH GLYCERIN GAUGE, TRIGGER SHUT-OFF AND INSULATED WAND, ADJUSTABLE
NOZZLE AND CHEMICAL INJECTION.
MODEL NO.
3040GA
PSI
3000
GPM
4.0
WT
155
LIST
PRICE
$ 2390.00
CATALOG
PRICE
$ 1675.00
3500G-SERIES
THIS POWERFUL 3500 PSI WASHER WILL REALLY GET THE JOB DONE! INDUSTRIAL GRADE
ANNOVI PLUNGER PUMP, EASY START 390CC HONDA GAS ENGINE WITH OIL ALERT™
PROTECTION, PRESSURE CONTROL WITH GLYCERIN GAUGE, CHEMICAL INJECTION,
TRIGGER SHUT-OFF WITH INSULATED WAND, AND ADJUSTABLE NOZZLE.
MODEL NO.
3540G
www.sprayland.com
PSI
3500
GPM
4.0
WT
170
LIST
PRICE
$ 2795.00
PAGE 61
CATALOG
PRICE
$ 1890.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE WASHERS
CONTRACTOR DUTY PRESSURE WASHERS
2000E-SERIES
THESE PRESSURE WASHERS ARE BUILT FOR THE TOUGH JOBS! DESIGNED FOR HEAVY
INDUSTRIAL, LARGE FARM OPERATIONS, AND HEAVY MACHINERY. FEATURES INCLUDE
2400 SERIES POWERLINE PLUS™ TRIPLEX PLUNGER PUMP, HEAVY-DUTY BALDOR MOTOR,
ADJUSTABLE PRESSURE CONTROL, GLYCERIN GAUGE, ADJUSTABLE NOZZLE, 50 FT
PRESSURE HOSE, TRIGGER SHUT-OFF AND INSULATED WAND, AND SOAP INJECTION.
HANDLE AND BASE ARE POWDER PAINTED, STEEL RIM PNEUMATIC WHEELS. THREE PHASE
MODELS ALSO AVAILABLE.
MODEL NO.
2044E
2544E
PSI
2000
2500
GPM
4.4
4.4
HP
5
7.5
LIST
PRICE
$ 2526.00
2760.00
WT
185
235
CATALOG
PRICE
$ 1865.00
2145.00
2000G-SERIES
THE G SERIES PRESSURE WASHERS ARE THE CONTRACTOR'S FAVORITE. COMPLETELY
PORTABLE AND WILL REMOVE THE STUBBORN GREASE AND DIRT. HYPRO POWERLINE
PLUS™ PUMP, 2:1 GEAR REDUCTION FOR REDUCED PUMP WEAR, HONDA GAS ENGINE WITH
OIL ALERT™ PROTECTION, PRESSURE CONTROL WITH GLYCERIN GAUGE, TRIGGER SHUT-OFF
AND INSULATED WAND, ADJUSTABLE NOZZLE AND CHEMICAL INJECTION. HANDLE AND BASE
PLATE ARE POWDER PAINTED, STEEL RIM PNEUMATIC WHEELS.
MODEL NO.
2044G
2544G
PSI
2000
2500
GPM
4.4
4.4
HP
8
11
CATALOG
PRICE
$ 2295.00
2145.00
LIST
PRICE
$ 2935.00
2822.00
WT
185
195
HONDA ELECTRIC START PRESSURE WASHERS
OUR TOUGHEST COLD WATER POWER WASHERS. DESIGNED FOR HEAVY CONSTRUCTION,
CUSTOM CLEANING BUSINESSES, FACTORIES AND MANY OTHER USES. 2430 POWERLINE
PLUS™ PUMP PLUNGER PUMP, HONDA GAS ENGINE WITH OIL ALERT™ PROTECTION,
STARTER/CHARGING SYSTEM, 2:1 GEAR REDUCTION FOR REDUCED WEAR ON PUMP,
PRESSURE CONTROL WITH GLYCERIN GAUGE, TRIGGER SHUT-OFF AND INSULATED WAND,
ADJUSTABLE NOZZLE AND CHEMICAL INJECTION. HANDLE AND BASE PLATE ARE POWDER
PAINTED, STEEL RIM PNEUMATIC WHEELS, 12 VOLT BATTERY.
MODEL NO.
2544GE
3043GE
PSI
2500
3000
GPM
4.4
4.3
HP
11
13
WT
140
205
LIST
PRICE
$ 2935.00
3160.00
CATALOG
PRICE
$ 2295.00
2490.00
GAS ENGINE HOT WATER PRESSURE WASHERS
OUR TOP OF THE LINE POWER WASHERS. THEY WILL TACKLE YOUR TOUGHEST CLEANING
JOB! COMPLETELY SELF CONTAINED, ALL YOU NEED IS A WATER SOURCE! FOR HEAVY
CONSTRUCTION, CUSTOM CLEANING BUSINESSES, AND OTHER USES. ANNOVI PLUNGER
PUMPS, HONDA ELECTRIC START GAS ENGINEs WITH OIL ALERT™ PROTECTION, 18 AMP
STARTER/CHARGING SYSTEM. HEATS WATER TO 195ºF, 12 VOLT BURNER SYSTEM, 12
GALLON FUEL CAPACITY (BURNER), TEMP CONTROL, PRESSURE CONTROL WITH GLYCERIN
GAUGE, TRIGGER SHUT-OFF AND INSULATED WAND, ADJUSTABLE NOZZLE AND CHEMICAL
INJECTION. POWDER PAINTED TUBE FRAME, STAINLESS STEEL COIL COVER AND STEEL
RIM PNEUMATIC WHEELS.
MODEL NO.
3540GH
www.sprayland.com
PSI
3500
GPM
4.0
HP
13
WT
475
LIST
PRICE
$ 5405.00
PAGE 62
CATALOG
PRICE
$ 4730.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE WASHERS
HOT WATER PRESSURE WASHERS
1102EH-SERIES
AN EXCELLENT STARTER HOT WATER WASHER FOR USING IN RESIDENTIAL,
AGRICULTURAL, AND SMALL BODY SHOPS APPLICATIONS . FEATURES INCLUDE DUPLEX
PLUNGER PUMP, 2 HP ELECTRIC MOTOR, 115 VOLT, THERMOSTATIC CONTROL TO 190ºF,
ADJUSTABLE NOZZLE, 30 FT PRESSURE HOSE, TRIGGER SHUT-OFF AND INSULATED
WAND, AND SOAP INJECTION. STEEL HUB PNEUMATIC WHEELS. HOLDS 12 GALLONS OF
KEROSENE OR #1 FUEL OIL.
MODEL NO.
1302EH
PSI
1300
GPM
2.1
HP
2
WT
350
LIST
PRICE
$ 3260.00
CATALOG
PRICE
$ 2830.00
753EH-SERIES
THE 753EH HOT WATER WASHER HAS MORE GPM FOR BETTER CLEANABILITY. DESIGNED
TO BE USED IN AGRICULTURE, WORKSHOPS, WASH BAY SETUPS, AND MANY OTHER
APPLICATIONS USING 115 VOLT. FEATURES INCLUDE TRIPLEX PLUNGER PUMP, HEAVY
DUTY 1½ HP ELECTRIC MOTOR, THERMOSTATIC CONTROL TO 190ºF, ADJUSTABLE NOZZLE,
30 FT PRESSURE HOSE, TRIGGER SHUT-OFF AND INSULATED WAND, AND SOAP INJECTION.
STEEL HUB PNEUMATIC WHEELS. 12 GALLON FUEL TANK.
MODEL NO.
753EH
PSI
750
GPM
3.0
HP
1.5
WT
350
CATALOG
PRICE
$ 2935.00
LIST
PRICE
$ 3687.00
2040EH-SERIES
TURN ON THE BURNER, PULL THE TRIGGER AND GET MEAN WITH THE GRIME. CLEAN
TRACTORS, SKID LOADERS, GREASY ENGINES, CONCRETE, AND MANY OTHER USES.
COMMERCIAL RATED. 12 GALLON FUEL CAPACITY, ANNOVI TRIPLEX PLUNGER PUMP, HEAVY
DUTY 5 HP ELECTRIC MOTOR, 220 VOLT, SCHEDULE 80 COIL, THERMOSTATIC CONTROL, 50
FT PRESSURE HOSE, TRIGGER SHUT-OFF AND INSULATED WAND, ADJUSTABLE NOZZLE,
AND SOAP INJECTION. POWDER PAINTED FRAME, STAINLESS STEEL COIL COVER, STEEL
HUB PNEUMATIC WHEELS.
MODEL NO.
2040EH
PSI
2000
GPM
4.0
HP
5
WT
460
LIST
PRICE
$ 4520.00
CATALOG
PRICE
$ 3680.00
2540EH-SERIES
THIS POWERFUL MACHINE WILL HANDLE YOUR MEANEST CLEANING JOBS. WILL BLAST
GREASE AND DIRT OFF IN NO TIME! PERFECT FOR HEAVY CONSTRUCTION, CUSTOM
CLEANING BUSINESSES, FACTORIES AND MANY OTHER USES. 12 GALLON FUEL CAPACITY,
ANNOVI PLUNGER PUMP, 7½ HP MOTOR, 220 VOLT, SCHEDULE 80 COIL, THERMOSTATIC
CONTROL, 50 FT PRESSURE HOSE, TRIGGER SHUT-OFF AND INSULATED WAND,
ADJUSTABLE NOZZLE, AND SOAP INJECTION. STEEL HUB PNEUMATIC WHEELS, HEAVY
STEEL FRAME.
MODEL NO.
2540EH
www.sprayland.com
PSI
2500
GPM
4.0
HP
7.5
WT
475
LIST
PRICE
$ 4925.00
PAGE 63
CATALOG
PRICE
$ 3990.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
COMMERCIAL CLEANERS
HYDROSTATIC TESTER
USED TO PRESSURE TEST RESIDENTIAL WATER LINES, IRRIGATION SYSTEMS
AND OTHER APPLICATIONS. 110 VOLT TEFC MOTOR, TRIPLEX PLUNGER PUMP,
PRESSURE ADJUSTMENT, GLYCERIN PRESSURE GAUGE, 500 PSI 3 GPM MAX.
PLUMBING FROM TESTER TO PIPE LINE IS NOT INCLUDED BUT CAN BE ORDERED
SEPARATELY. SHIP WT. 65 LBS.
MODEL NO.
500TU
CATALOG
PRICE
$ 600.00
LIST
PRICE
$ 733.00
PTO DRIVEN PRESSURE WASHER
POWERFULL PRESSURE WASHER TO COUPLE TO YOUR TRACTOR’S 540 PTO SHAFT.
COMPACT DESIGN IS PERFECT FOR CLEANING AROUND THE FARM OR CONSTRUCTION
SIGHT. PUMP SYSTEM IS MOUNTED TO GEARBOX WITH 6 SPLINE HALLOW SHAFT.
INCLUDES 50 FT OF HOSE, TRIGGER HAND GUN, CHEMICAL INJECTION ,AND HOSE QUICK
DISCONECT.
MODEL NO.
4040PTO
PSI
4000
GPM
4.0
CATALOG
PRICE
$ 1275.00
LIST
PRICE
$ 1596.00
WT
46
INDUSTRIAL DUTY PRESSURE WASHER
THIS PRESSURE WASHER IS DESIGNED FOR HEAVY INDUSTRIAL CLEANING. THIS
STATIONARY MACHINE IS BUILT WITH HYPRO 2430 POWERLINE PLUS PUMPS AND 10 HP 3
PHASE MOTORS TO HANDLE THE RUGGED, EXTENSIVE AMOUNTS OF USE THIS WASHER
WAS MADE FOR. THE 65 GALLON COOLING TANK WILL ELIMINATE HEAT BUILDUP WHEN
THE UNIT IS RUNNING (IN BYPASS) BUT NOT IN USE. COMPACT ONE PIECE DESIGN,
ADJUSTABLE PRESSURE CONTROL, GLYCERIN GAUGE, INSULATED WAND, TRIGGER
SHUT OFF, AND 50 FT. OF HOSE.
MODEL NO.
3643EC
PSI
3600
GPM
4.3
HP
10
WT
350
LIST
PRICE
$ 4697.00
CATALOG
PRICE
$ 3945.00
SKID MOUNTED COMMERCIAL PRESSURE WASHER
START YOUR OWN CUSTOM CLEANING BUSINESS AND HAVE THIS SELF-CONTAINED MACHINE PAY FOR ITSELF! SLIDES INTO A FULL
SIZED PICK UP (¾ TON OR BIGGER RECOMMENDED) TRIPLEX PLUNGER PUMP, HONDA GAS ENGINES WITH OIL ALERT™
PROTECTION, 18 AMP CHARGING SYSTEM, 12 VOLT BATTERY. PRESSURE CONTROL WITH GLYCERIN GAUGE, TRIGGER SHUT-OFF
AND INSULATED WAND, AND ADJUSTABLE NOZZLE . MANUAL HOSE REEL WITH 100 FT OF HOSE. 300 GALLON LOW-PROFILE WATER
TANK. AVAILABLE IN COLD AND HOT WATER MODELS. 69”L x 48’W x 71”H.
HOT WATER UNIT WITH
COLD WATER-460 LBS, HOT WATER-685 LBS.
GARDEN HOSE REEL SHOWN.
TRUCK NOT INCLUDED
MODEL NO.
3543-300SC
3543-300HC
TYPE
COLD WATER
HOT WATER
PSI
3500
3500
GPM
4.3
4.3
LIST
PRICE
$ 7870.00
10415.00
ADD OPTIONS:
8550TF
TANK QUICK FILL W/ FLOAT VALVE
52.00
HR100S
HOSE REEL W/ 100 FT GARDEN HOSE 389.20
www.sprayland.com
PAGE 64
CATALOG
PRICE
$ 6580.00
8530.00
46.75
340.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRESSURE WASHER ACCESSORIES
HEAT EXCHANGER
HOSE REELS
TURN YOUR EXISTING COLD WATER
PRESSURE WASHER INTO A HOT WATER
WASHER! FEATURES INCLUDE: BURNER
ON-OFF SWITCH, THERMOSTAT CONTROL,
SAFETY TEMP SHUT-DOWN, FLOW
SWITCH (SHUTS OFF BURNER WHEN
TRIGGER IS RELEASED), 12 GAL. FUEL
CAPACITY (KEROSENE OR #1 FUEL OIL).
RATED AT 385,000 BTU AND 4000 PSI,
5 GPM MAX. SHIP WT 275 LBS.
THIS REEL IS THE FAVORITE OF THE
COMMERCIAL LAWN CARE AND PEST CONTROL
AND PRESSURE CLEANING INDUSTRIES. STEEL
CONSTRUCTION, BALL BEARINGS, DURABLE
SWIVEL, AND HEAVY DUTY 12 VOLT MOTOR.WILL
HANDLE MOST LIQUID PRODUCTS AND IS RATED
TO 4000 PSI MAX. PRESSURE. HOLDS 450 FT. OF
3/8” HOSE AND 325 FT. OF 1/2” HOSE.
CATALOG
PRICE
$ 2315.00
LIST
PRICE
$ 2822.00
MODEL NO.
HE-110
ELECTRIC REWIND REEL
DUAL LINE ELECTRIC REWIND REEL
THIS REEL IS BECOMING POPULAR WITH THE
COMMERCIAL LAWN CARE INDUSTRY. FOR USE
WITH DUAL LINE FEED CHEMICAL
APPLICATIONS. STEEL CONSTRUCTION, BALL
BEARINGS, DUAL SWIVEL INLETS, DUAL
OUTLETS, AND HEAVY DUTY 12 VOLT
MOTOR.WILL HANDLE MOST LIQUID PRODUCTS
HOLDS 250 FT. OF 1/2" I.D. AND 1/4” I.D. HOSE.
ROTARY SURFACE CLEANER
EASY TO USE. WILL WORK WITH BOTH HOT AND
COLD WATER WASHERS. HEAVY DUTY METAL
HANDLES AND LIGHT WEIGHT POLYPROPYLENE
BASE. BLASTS AWAY DIRT, GREASE, ROAD FILM,
AND MANY OTHER MATERIALS FROM SIDEWALKS,
PARKING LOTS, GARAGES, POOLS, PATIOS, ETC.
RATED UP TO 4000 PSI, 8 GPM, 180°F. AVAILABLE
IN 18” OR 20” DIAMETER CLEANING SURFACE
AREAS. SHIPPING WT. 36 LBS.
HOSE REEL ROLLER GUIDES TO AID IN REWINDING AND PROTECTION FROM SHARP
OBJECTS. PVC ROLLERS WITH BALL
BEARINGS. BOLTS RIGHT TO THE REEL.
PART NO.
E1526-17-18
E2036-17-18
KT1718RG
PART NO.
AR-ROTARY-18
AR-ROTARY-20
CLEANER
DIAMETER
18”
20”
CATALOG
PRICE
$ 640.00
650.00
LIST
PRICE
$ 983.35
996.90
LIQUID DETERGENT
POWER WASHER SOAP FOR REMOVING TOUGH
DIRT AND ROAD GRIME BUT DOESN'T CONTAIN AND
HARSH INGREDIENTS TO HARM PAINT FINISH.
RINSES COMPLETELY. ONE GALLON
CONCENTRATE. 1 GALLON, SHIP WT 10 LBS.
PART NO.
LS128
LIST
PRICE
$ 16.50
CATALOG
PRICE
$ 14.25
ATTACH THE SAND INJECTOR TO THE END OF YOUR WAND AND PUT
THE SAND PROBE INTO THE SILICA SAND. YOU ARE READY TO HIGH
PRESSURE SAND BLAST! THESE SAND BLASTERS COME WITH A
TUNGSTEN CARBIDE MIXING NOZZLE FOR LONG LIFE, SUCTION HOSE,
AND THE SAND PROBE. SHIP WT. 4 LBS
PART NO.
3398-0002/1.4
www.sprayland.com
CATALOG
PRICE
$ 635.00
775.00
78.00
HOSE REELS
COMPACT MINI MANUAL REEL
IDEALLY USED WHERE SPACE AND
WEIGHT ARE A FACTOR. WILL HOLD 75
TO 150 FEET OF 3/8" I.D. HOSE
(DEPENDING ON MODEL) AND UP TO
4000 PSI MAX. PRESSURE. OPTIONAL
BRACKET KIT AVAILABLE FOR
MOUNTING M5-5-14 TO YOUR
PRESSURE WASHER.
PART NO.
M5-5-14
M10-5-14
KT300PW
(INCLUDES HOSE NOT PICTURED)
LIST
PRICE
$ 164.00
LIST
PRICE
$ 739.00
929.00
96.00
WT
56 LBS
63 LBS
12 LBS
MOUNTING KIT SHOWN MOUNTED ON
PRESSURE WASHER WITH REEL
SAND BLASTING KIT
MAX
PSI
3650
DESCRIPTION
SINGLE LINE REEL
DUAL LINE REEL
REEL GUIDE
CATALOG
PRICE
$ 130.00
UP TO 75 FT HOSE
UP TO 150 FT HOSE
MOUNTING KIT
LIST
PRICE
$228.00
256.00
86.00
WT
19
21
7
CATALOG
PRICE
$ 181.00
187.00
74.00
MANUAL REEL
USED WHERE LONG LENGTHS OF HOSE ARE
NEEDED AND IS MORE EFFICIENT THAN COILING
BY HAND. WELL SUITED FOR PRESSURE
CLEANING, LAWN CARE, AND PEST CONTROL
USE. HEAVY STEEL CONSTRUCTION, BALL
BEARINGS, AND REEL LOCK ARE SOME
PART NO.
M10-5
M15-5
PAGE 65
DESCRIPTION
UP TO 300 FT. OF 3/8" HOSE
UP TO 400 FT. OF 3/8" HOSE
WT
35
39
LIST
PRICE
$275.00
298.00
CATALOG
PRICE
$ 250.00
260.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PLUNGER PUMPS
PLUNGER PUMPS
PLUS®
HYPRO POWERLINE PUMPS ARE ONE OF THE TOUGHEST PUMPS ON THE MARKET! CERAMIC PLUNGERS, BRONZE HEAD,
ONE PIECE SEAL CARTRIDGE FOR LONGER SEAL LIFE AND EASIER REPAIRS, STAINLESS VALVES, GRAPHITE PISTON
GUIDES, ONE PIECE CONNECTING RODS, AND AVAILABLE IN SEVERAL CONFIGURATIONS. 160º F. MAX TEMPERATURE.
2200B-P DUPLEX PLUNGER PUMPS
3/4" O.D. SOLID SHAFT WITH MOUNTING RAIL KIT
MAX
MAX
NPT
MODEL NO.
GPM
PSI
RPM
INLET
2220B-P
2.1
2000
1725
1/2"
2230B-P
3.0
2000
1725
1/2"
2221B-P
2.1
1500
3450
1/2"
2231B-P
3.0
1500
3450
1/2"
NPT
OUTLET
3/8"
3/8"
3/8"
3/8"
SHIP
WT.
14 LBS
14 LBS
14 LBS
14 LBS
HYPRO
LIST
$ 621.00
621.00
621.00
621.00
CATALOG
PRICE
$ 375.00
375.00
375.00
375.00
5/8" I.D. HOLLOW SHAFT WITH TORQUE ARM
MAX
MAX
MODEL NO.
GPM
PSI
RPM
2220B-HP
2.1
2000
1725
2230B-HP
3.0
2000
1725
2221B-HP
2.1
1500
3450
2231B-HP
3.0
1500
3450
NPT
OUTLET
3/8"
3/8"
3/8"
3/8"
SHIP
WT.
14 LBS
14 LBS
14 LBS
14 LBS
HYPRO
LIST
$ 640.00
640.00
640.00
640.00
CATALOG
PRICE
$ 390.00
390.00
390.00
390.00
5/8" I.D. HOLLOW SHAFT WITH BUILT-IN C-FLANGE FOR 56 FRAME MOTOR
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2220B-AP
2.1
2000
1725
1/2"
3/8"
14 LBS
2230B-AP
3.0
2000
1725
1/2"
3/8"
14 LBS
2221B-AP
2.1
1500
3450
1/2"
3/8"
14 LBS
2231B-AP
3.0
1500
3450
1/2"
3/8"
14 LBS
HYPRO
LIST
$ 645.00
645.00
645.00
645.00
CATALOG
PRICE
$ 410.00
410.00
410.00
410.00
3/4" I.D. HOLLOW SHAFT WITH GAS ENGINE FLANGE FOR 3 TO 6.5 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2231B-CP
3.0
1500
3400
1/2"
3/8"
14 LBS
HYPRO
LIST
$ 686.00
CATALOG
PRICE
$ 425.00
NPT
INLET
1/2"
1/2"
1/2"
1/2"
2300B-P TRIPLEX PLUNGER PUMPS
3/4" O.D. SOLID SHAFT
MODEL NO.
2330B-P
2340B-P
2351B-P
GPM
3.0
4.2
4.0
MAX
PSI
2500
2500
3000
MAX
RPM
1725
1725
1725
NPT
INLET
1/2"
1/2"
1/2"
NPT
OUTLET
3/8"
3/8"
3/8"
SHIP
WT.
19 LBS
19 LBS
19 LBS
3/4" I.D. HOLLOW SHAFT WITH GAS ENGINE FLANGE FOR 3 TO 6.5 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2354B-CP
2.7
2000
3400
1/2"
3/8"
19 LBS
HYPRO
LIST
$ 821.00
821.00
845.00
CATALOG
PRICE
$ 495.00
495.00
510.00
HYPRO
LIST
$ 909.00
CATALOG
PRICE
$ 545.00
HYPRO
LIST
$ 1324.00
1566.00
1566.00
CATALOG
PRICE
$ 795.00
940.00
940.00
2400B-P & 2430B-P TRIPLEX PLUNGER PUMPS
1" SOLID SHAFT WITH MOUNTING RAIL KIT
MAX
MAX
MODEL NO.
GPM
PSI
RPM
2410B-P
4.4
2500
1725
2430B-P
4.3
3600
1725
2431B-P
5.1
3600
1725
NPT
INLET
3/4"
3/4"
3/4"
NPT
OUTLET
1/2"
1/2"
1/2"
SHIP
WT.
39 LBS
39 LBS
39 LBS
NOTE: ON 2300 & 2400 PUMPS, ADD SUFFIX "K" TO MODEL NUMBER IF ORDERING WITHOUT MOUNTING RAIL. SUBTRACT $8.00. (EXAMPLE: 2410B-KP)
FOR LEFT-HAND SHAFT ON ALL POWER-LINE PUMPS ADD SUFFIX "-L"
NO CHARGE (EXAMPLE: 2230B-LP)
www.sprayland.com
PAGE 66
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PLUNGER & PISTON PUMPS
PLUNGER PUMPS
PLUS®
2200B-P DUPLEX PLUNGER PUMPS
5/8" I.D. HOLLOW SHAFT WITH BUILT-IN C-FLANGE FOR 56 FRAME MOTOR
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2220B-AP
2.1
2000
1725
1/2"
3/8"
16 LBS
2230B-AP
3.0
2000
1725
1/2"
3/8"
16 LBS
2221B-AP
2.1
1500
3450
1/2"
3/8"
16 LBS
HYPRO
LIST
$ 824.00
824.00
824.00
CATALOG
PRICE
$ 515.00
515.00
515.00
3/4" I.D. HOLLOW SHAFT WITH GAS ENGINE FLANGE FOR 3 TO 6.5 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2231B-CP
3.0
1500
3450
1/2"
3/8"
16 LBS
HYPRO
LIST
$ 870.00
CATALOG
PRICE
$ 540.00
2300B-P TRIPLEX PLUNGER PUMPS
3/4" I.D. HOLLOW SHAFT WITH GAS ENGINE FLANGE FOR 3 TO 6.5 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
2354B-CP
2.7
2000
3450
1/2"
3/8"
22 LBS
HYPRO
LIST
$ 1093.00
CATALOG
PRICE
$ 680.00
3/4" O.D. SHAFT WITH 6" ELECTRIC CLUTCH AND MOUNTING RAILS
MAX
MAX
NPT
NPT
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
2359B-PY
3.5
3000
1725
1/2"
3/8"
HYPRO
LIST
$ 1423.00
CATALOG
PRICE
$ 855.00
SHIP
WT.
38 LBS
5300 SERIES SMALL TWIN® PISTON PUMPS
THESE PUMPS ARE CONSTRUCTED OF CAST IRON BODIES, STAINLESS STEEL VALVES, AND BRASS AND STAINLESS
INTERNAL PARTS. SOLID SHAFT PUMPS ARE FOR PULLEY OR COUPLING DRIVE AND HOLLOW SHAFT PUMPS ARE FOR
DIRECT MOUNTING TO A 56 FRAME ELECTRIC MOTOR. 1/2"NPT PORTS, 140º F. MAX. TEMPERATURE.
5300 SERIES
MODEL NO.
5320C-RX
5320C-HRX
5330C-RX
5330C-HRX
GPM
2.0
2.0
3.0
3.0
MAX
PSI
500
500
500
500
MAX
RPM
1800
1800
1800
1800
SHAFT DIA
5/8" O.D. SOLID
5/8" I.D. HOLLOW
5/8" O.D. SOLID
5/8" I.D. HOLLOW
SHIP
WT.
10
10
10
10
HYPRO
LIST
$ 458.00
458.00
458.00
458.00
CATALOG
PRICE
$ 275.00
275.00
275.00
275.00
GPM
2.2
2.2
MAX
PSI
1000
1000
MAX
RPM
1800
1800
SHAFT DIA
5/8" O.D. SOLID
5/8" I.D. HOLLOW
SHIP
WT.
11
11
HYPRO
LIST
$ 492.00
492.00
CATALOG
PRICE
$ 295.00
295.00
GPM
2.9
2.9
MAX
PSI
800
800
MAX
RPM
1800
1800
SHAFT DIA
5/8" O.D. SOLID
5/8" I.D. HOLLOW
SHIP
WT.
11
11
HYPRO
LIST
$ 492.00
492.00
CATALOG
PRICE
$ 295.00
295.00
5321 SERIES
MODEL NO.
5321C
5321C-H
5324 SERIES
MODEL NO.
5324C
5324C-H
www.sprayland.com
PAGE 67
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ANNOVI-REVERBERI
PLUNGER PUMPS
RMW SERIES ECONOMY AXIAL RADIAL PLUNGER PUMPS
7/8” HOLLOW SHAFT WITH VERTICAL GAS ENGINE FLANGE AND BUILT-IN UNLOADER/INJECTOR
MAX
MAX
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
LIST
RMW2G24
2.0
2400
3400
GHT
22BST
8 LBS
$ 193.19
RMW2.5G25D
2.5
2500
3400
GHT
22BST
8 LBS
271.42
CATALOG
PRICE
$ 115.00
165.00
RMV SERIES ECONOMY AXIAL RADIAL PLUNGER PUMPS
3/4” HOLLOW SHAFT WITH GAS ENGINE FLANGE AND BUILT-IN UNLOADER/INJECTOR
MAX
MAX
MPT
MPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
LIST
RMV2G25D
2.0
2500
3400
1/2"
3/8"
8 LBS
$ 271.42
RMV2.5G25D
2.5
3000
3400
1/2"
3/8"
8 LBS
271.42
CATALOG
PRICE
$ 165.00
165.00
SJV SERIES HEAVY DUTY AXIAL RADIAL PLUNGER PUMPS
3/4” HOLLOW SHAFT WITH GAS ENGINE FLANGE AND BUILT-IN UNLOADER/INJECTOR
MAX
MAX
MPT
MPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
SJV2.5G27D-F7 2.5
2700
3400
1/2"
3/8"
11 LBS
SJV3G27D-F7
3
2700
3400
1/2"
3/8"
11 LBS
A/R
LIST
$ 496.70
518.76
CATALOG
PRICE
$ 300.00
310.00
A/R
LIST
$ 518.76
CATALOG
PRICE
$ 310.00
XJV SERIES HEAVY DUTY AXIAL RADIAL PLUNGER PUMPS
5/8” HOLLOW SHAFT WITH NEMA 56C FLANGE AND BUILT-IN UNLOADER/INJECTOR
MAX
MAX
MPT
MPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
XJV2G15E-F8
2.0
1450
3400
1/2"
3/8"
11 LBS
RRA SERIES TRIPLEX PLUNGER PUMPS
1 1/8” I.D. HOLLOW SHAFT- “E” SERIES WITH 182/184C NEMA FLANGE FOR ELECTRIC MOTORS
MAX
MAX
NPT
NPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
LIST
RRA3G30E-F17 3.0
3000
1750
1/2"
3/8"
18 LBS
$ 621.54
RRA4G30E-F17 4.0
3000
1750
1/2"
3/8"
18 LBS
621.54
RRA5.5G26E-F17 5.5
2600
1750
1/2"
3/8"
18 LBS
621.54
CATALOG
PRICE
$ 375.00
375.00
375.00
RRV SERIES TRIPLEX PLUNGER PUMPS
1" I.D. HOLLOW SHAFT- WITH GAS ENGINE FLANGE FOR 8-18 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
RRV3.5G36D-F24 3.5
3600
3400
1/2"
3/8"
18 LBS
RRV4G36D-F24 4.0
3600
3400
1/2"
3/8"
18 LBS
CATALOG
PRICE
$ 360.00
360.00
A/R
LIST
$ 600.10
600.10
RSV SERIES TRIPLEX PLUNGER PUMPS
www.sprayland.com
3/4” HOLLOW SHAFT WITH GAS ENGINE FLANGE AND BUILT-IN UNLOADER/INJECTOR
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
RSV2.5G25D-F25 2.5
2500
3400
1/2"
3/8"
14 LBS
RSV3G25D-F25 3.0
2500
3400
1/2"
3/8"
14 LBS
A/R
LIST
$ 651.22
651.22
CATALOG
PRICE
$ 390.00
390.00
1" I.D. HOLLOW SHAFT- WITH GAS ENGINE FLANGE FOR 8-18 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET OUTLET
WT.
RSV3G30D-F40
3.0
3500
1750
1/2"
3/8"
14 LBS
RSV3.5G35D-F40 3.5
3500
1750
1/2"
3/8"
14 LBS
RSV4G40D-F40
4.0
4000
3400
1/2"
3/8"
14 LBS
A/R
LIST
$ 700.88
700.88
711.93
CATALOG
PRICE
$ 420.00
420.00
430.00
PAGE 68
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ANNOVI-REVERBERI
PLUNGER PUMPS
XTA & XTV SERIES TRIPLEX PLUNGER PUMPS
24MM O.D. SOLID SHAFT- “N” SERIES
MAX
MODEL NO.
GPM
PSI
XTA2G15NBA
2.1
1500
XTA3G16N
3.0
1600
A/R
LIST
$ 596.04
612.59
CATALOG
PRICE
$ 360.00
365.00
5/8” I.D. HOLLOW SHAFT- “E” SERIES WITH 56C NEMA FLANGE FOR ELECTRIC MOTORS
MAX
MAX
NPT
NPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET OUTLET
WT.
LIST
XTA2G15EBA-F8 2.1
1800
1750
1/2"
3/8"
9 LBS
$ 629.14
XTA3G16EBA-F8 3.0
1600
1750
1/2"
3/8"
10 LBS
651.22
XTV2G15EBA-F8 2.1
1500
3400
1/2"
3/8"
9 LBS
629.14
XTV3G16E-F8
3.0
1500
3400
1/2"
3/8"
10 LBS
629.14
CATALOG
PRICE
$ 375.00
390.00
375.00
375.00
3/4" I.D. HOLLOW SHAFT- “D” SERIES WITH FLANGE FOR 3-6.5 HP GAS ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
XTV2G15DBA-F7 2.1
1500
3400
1/2"
3/8"
9 LBS
XTV3G22D-F7
3.0
2200
3400
1/2"
3/8"
10 LBS
A/R
LIST
$ 629.14
673.29
CATALOG
PRICE
$ 375.00
405.00
5/8” I.D. HOLLOW SHAFT- “E” SERIES WITH 56C NEMA FLANGE FOR ELECTRIC MOTORS
MAX
MAX
NPT
NPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
LIST
XMA2G22E-F33 2.1
2200
1750
1/2"
3/8"
15 LBS
$ 629.14
XMA2.5G18E-F33 2.5
1800
1750
1/2"
3/8"
15 LBS
629.14
XMA3G18E-F33 3.0
1800
1750
1/2"
3/8"
15 LBS
629.14
CATALOG
PRICE
$ 375.00
375.00
375.00
5/8” I.D. HOLLOW SHAFT- “E” SERIES WITH 56C NEMA FLANGE FOR ELECTRIC MOTORS
MAX
MAX
NPT
NPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET OUTLET
WT.
LIST
XMV2G25E-F33 3.0
2500
3400
1/2"
3/8"
15 LBS
$ 629.14
XMV2.5G20E-F33 3.5
3000
3400
1/2"
3/8"
15 LBS
629.14
CATALOG
PRICE
$ 375.00
375.00
3/4" I.D. HOLLOW SHAFT- “D” SERIES WITH FLANGE FOR 3-6.5 HP GAS ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
XMV2.5G26D-F25 2.5
2600
3400
1/2"
3/8"
15 LBS
XMV3G25D-F25 3.0
2500
3400
1/2"
3/8"
15 LBS
XMV3.5G26D-F25 3.5
2500
3400
1/2"
3/8"
15 LBS
CATALOG
PRICE
$ 365.00
365.00
365.00
MAX
RPM
1750
1750
NPT
INLET
1/2"
1/2"
NPT
OUTLET
3/8"
3/8"
SHIP
WT.
9 LBS
10 LBS
XMA & XMV SERIES TRIPLEX PLUNGER PUMPS
A/R
LIST
$ 612.59
612.59
612.59
RKA & RKV SERIES TRIPLEX PLUNGER PUMPS
24MM O.D. SOLID SHAFT- “N” SERIES
MAX
MODEL NO.
GPM
PSI
RKA3.5G30N
3.5
3000
RKA4G30N
4.0
3000
A/R
LIST
$ 849.89
849.89
CATALOG
PRICE
$ 510.00
510.00
1 1/8” I.D. HOLLOW SHAFT- “E” SERIES WITH 182/184C NEMA FLANGE FOR ELECTRIC MOTORS
MAX
MAX
NPT
NPT
SHIP
A/R
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
LIST
RKA3.5G30E-F17 3.5
3000
1750
1/2"
3/8"
21 LBS
$ 905.09
RKA4G30E-F17 4.0
3000
1750
1/2"
3/8"
21 LBS
905.09
CATALOG
PRICE
$ 545.00
545.00
1" I.D. HOLLOW SHAFT- “D” SERIES WITH GAS ENGINE FLANGE FOR 8-18 HP ENGINES
MAX
MAX
NPT
NPT
SHIP
MODEL NO.
GPM
PSI
RPM
INLET
OUTLET
WT.
RKV3.5G30AD-F24 3.5
3000
3400
1/2"
3/8"
21 LBS
RKV4G37HD-F24
4.0
3700
3400
1/2"
3/8"
21 LBS
CATALOG
PRICE
$ 529.00
530.00
MAX
RPM
1750
1750
FOR UNLOADER/INJECTOR KITS FOR “XT” PUMPS ADD SUFFIX “M2I”
FOR UNLOADER/INJECTOR KITS FOR “RK” PUMPS ADD SUFFIX “C2I”
www.sprayland.com
PAGE 69
NPT
INLET
1/2"
1/2"
NPT
OUTLET
3/8"
3/8"
SHIP
WT.
19 LBS
19 LBS
A/R
LIST
$ 805.75
883.00
ADD $109.00 (EXAMPLE: XTV3G16D-F7M2I)
ADD $135.00 (EXAMPLE: RKV4G35HD-F24C2I)
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PUMP & SYSTEM ACCESSORIES
FIXED INJECTOR
FLANGE KITS DESIGNED TO MOUNT POWERLINE™
PUMPS TO C-FACE MOTORS. THIS ELIMINATES
ALIGNMENT PROBLEMS AND EXPOSED TURNING
SHAFTS. SHIP WT. 4 LBS.
BRASS CONSTRUCTION, STAINLESS BALL AND
SPRING. 30:1 MIX RATIO, 4500 PSI MAX.
3/8” MPT INLET, 3/8” FPT OUTLET.
FITS PUMP
SERIES
2200/2300
2200/2300
2200/2300
2400/2430
2400/2430
FITS NEMA
FRAME
56C & 145TC
182TC & 184TC
213TC & 215TC
213TC & 215TC
182TC & 184TC
HYPRO
LIST
$ 80.50
141.00
147.00
182.00
178.00
CATALOG
PRICE
$ 60.00
106.00
102.00
136.00
133.00
FLANGE KITS DESIGNED TO MOUNT ANNOVI
PUMPS TO GAS ENGINES AND C-FACE MOTORS.
CATALOG
PRICE
$ 26.00
26.00
101.00
97.00
FITS PUMP
SERIES
FITS
LIST
XTV, XJV 3-6.5 HP ENGINE $ 32.45
XTA, XTV
56C MOTOR
32.45
RRA, RKA 184C MOTOR
135.30
RRV, RKV 8-13 HP ENGINE 129.49
THERMAL RELIEF VALVES
PROVIDES THERMAL PROTECTION TO PUMP FROM
HEAT BUILD-UP GENERATED IN RECIRCULATING
SYSTEMS. BRASS CONSTRUCTION, 140º F. POP-OFF.
PART NO.
TPP140-1/4A
TPP140-3/8
TPP140-1/2
LIST
PRICE
$ 18.25
18.25
18.25
SIZE
1/4" MPT
3/8" MPT
1/2" MPT
CATALOG
PRICE
$ 13.50
13.50
13.50
FLOW SWITCHES USED ON HOT WATER WASHERS
TO SHUT-OFF THE BURNER WHEN IN BYPASS MODE.
CAN BE MOUNTED VERTICAL OR HORIZONTALLY.
BRASS BODY, 3/8" NPT PORTS, 12 V. TO 250 V. 3500
PSI, 7.8 GPM, 180º F. MAX
MOUNTING TYPE
UNIVERSAL MOUNT
LIST
PRICE
$ 55.50
CATALOG
PRICE
$ 44.75
PRESSURE SWITCH
LIST
PRICE
$ 46.86
CATALOG
PRICE
$ 14.50
14.50
FIXED INJECTOR
PART NO.
MV41021
MV41023
GPM
RATING
3.0-4.0
4.0-5.5
LIST
PRICE
$ 18.30
18.30
CATALOG
PRICE
$ 14.50
14.50
ADJUSTABLE INJECTOR
ADJUSTABLE CHEMICAL INJECTOR FOR METERING YOUR
INJECTION RATE. BRASS CONSTRUCTION, ADJUSTMENT
COLLAR FOR REGULATING CHEMICAL DRAW. 3/8" FPT INLET,
3/8" MPT OUTLET. 4500 PSI, 200º F. MAX. RATINGS
PART NO.
MVR42021
MVR42021
GPM
RATING
3.0-4.0
4.0-5.0
LIST
PRICE
$ 24.75
24.75
CATALOG
PRICE
$ 18.75
18.75
BRASS CONSTRUCTION, ADJUSTMENT COLLAR FOR
REGULATING CHEMICAL DRAW. 3/8" FPT INLET, 3/8" MPT
OUTLET. 4500 PSI, 200º F. MAX.
PART NO.
MVR41021
MVR41021
GPM
RATING
3.0-4.0
4.0-5.0
LIST
PRICE
$ 24.75
24.75
CATALOG
PRICE
$ 18.75
18.75
INLINE UPSTREAM INJECTOR
PRESSURE SWITCH ACTIVATES AT 650 PSI AND CAN BE WIRED
EITHER N/O OR N/C. ¼" MPT INLET, 3500 PSI, 200º F. MAX
RATINGS.
PART NO.
AL690
LIST
PRICE
$ 18.30
18.30
ADJUSTABLE INJECTOR
FLOW SWITCH
PART NO.
ST-6
GPM
RATING
3.0-4.0
4.0-5.5
BRASS CONSTRUCTION, STAINLESS BALL AND
SPRING. 3/8” FPT INLET, 3/8” MPT OUTLET. 30:1 MIX
RATIO, 4500 PSI MAX.
FLANGE KITS
PART NO.
AR1579
AR1584
AR1591
1382580
PART NO.
MV42021
MV42023
v
PART NO.
8000-0003
8000-0010
8000-0043
8000-0017
8000-0018
C-FLANGE
CATALOG
PRICE
$ 37.85
DESIGNED FOR HIGH PRESSURE SOAP INJECTION APPLICATIONS.
METERS SOAP ON THE INLET SIDE OF THE PUMP FOR HIGH
PRESSURE INJECTION. FEMALE GARDEN HOSE INLET AND MALE
GARDEN HOSE OUTLET FOR EASY AND QUICK INSTALLATION TO
YOUR POWER WASHER. ON/OFF VALVE FOR INJECTING AND RINSING
WITHOUT REMOVING FROM THE SYSTEM. 160ºF, 140 PSI MAX
RATINGS.
INJECTOR HOSE AND STRAINER
CLEAR VINYL TUBING, 1/4" I.D. AND CHEMICAL LINE
STRAINER FOR USE IN INJECTION SYSTEMS.
PART NO.
ST-31
15003006
STRAINER
HOSE (PER / FT)
www.sprayland.com
LIST
PRICE
$ 2.37
.39
CATALOG
PRICE
$ 1.60
.35
PART NO.
ST-64/1.5
ST-64/4.0
PAGE 70
GPM RATINGS
1.5 TO 4.0 GPM
4.0 TO 7.0 GPM
LIST
PRICE
$ 59.22
59.22
CATALOG
PRICE
$ 47.25
47.25
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
HOT WATER SYSTEM COMPONENTS
OIL BURNER ASSEMBLY
THIS BURNER ASSEMBLY IS STANDARD EQUIPMENT ON OUR HOT WATER WASHERS. CAN BE
USED AS A REPLACEMENT FOR MOST BRANDS OF HOT WATER WASHERS AND AIR SCOOP
HEATERS. THIS ASSEMBLY INCLUDES: BLOWER ASSEMBLY (3450 RPM), IGNITION ASSEMBLY,
FUEL PUMP, AND FUEL SHUT-OFF SOLENOID VALVE. BURNS KEROSENE, #1 AND #2 FUEL OIL
FROM .44 TO 3.0 GPM. HEATS TO 380,000 BTU.
PART NO.
B2101
BX2603
SLU102
VOLTAGE
120 VOLT AC
230 VOLT AC
12 VOLT DC
REPLACEMENT FUEL
PUMP FOR
HOT PRESSURE WASHERS AND SPACE HEATERS.
SUITABLE FOR KEROSENE, AND NO.1 AND #2 FUEL
OILS. PLEASE GIVE MODEL NUMBER OR SPECS OF
PUMP WHEN ORDERING. SHIP WT. 4 LBS
REPLACEMENT TRANSFORMERS FOR
HOT WATER WASHERS, HIGH PRESSURE
HEATERS, AND AIR SCOOPS.
BURNER TYPE
12 VOLT DC-BECKETT
12 VOLT DC-BECKETT*
24 VOLT DC-BECKETT
120 VOLT AC-BECKETT
230 VOLT AC-BECKETT
120 VOLT AC-WAYNE
WT
1
1
1
2
2
6
LIST
PRICE
$ 195.40
160.90
138.90
58.13
88.00
89.44
* with safety control board
CATALOG
PRICE
$ 146.00
136.00
104.00
46.50
68.00
69.75
SAMPLE
PUMP NO.
A2VA-7116
OIL BURNER NOZZLES
SAMPLE
NOZZLE NO.
2.50 70B
REPLACEMENT SHUT-OFF FUEL SOLENOID USED ON
HOT WATER WASHERS TO SHUT OFF FLOW TO NOZZLE.
DESIGNED TO ATTACH DIRECTLY TO FUEL PUMP.
PART NO.
21441U
2233U
2234U
VOLTAGE
12 VOLT DC
120 VOLT AC
230 VOLT AC
CATALOG
PRICE
$ 21.75
30.00
30.00
HEAVY DUTY 3 POSITION ROTARY CAM SWITCH FOR
USE WITH PRESSURE WASHERS. FACE READS "OFFPUMP-BURNER". 4 MOUNTING SCREWS, SINGLE
PHASE.
PART NO.
S225-1639
LIST
PRICE
$ 108.50
AMPS/VOLTS
40 A. 230 VOLT
CATALOG
PRICE
$ 90.00
CATALOG
PRICE
$ 112.00
FOR USE ON HOT WATER WASHERS TO ADJUST
WATER TEMPERATURE. DUAL SCALE EASY TO
READ DIAL, COPPER IMMERSION BULB, UL LISTED,
4000 PSI MAX. ½"NPT PROBE. 16 TO 380 VOLT.
TEMP RANGE
86-194ºF. ±5ºF
CATALOG
LIST
$ 57.75
LIST
PRICE
$ 70.88
HIGH LIMIT SWITCH
REMOVES LIME, RUST, AND SCALE FROM YOUR HOT
WATER WASHER COIL. WON'T HARM YOUR PLUMBING.
FOLLOW MANUFACTURER'S INSTRUCTIONS. 32 OZ.
BOTTLE. SHIP WT. 3 LBS.
www.sprayland.com
LIST
PRICE
$ 147.00
THERMOSTAT
COIL CLEANER
LIST
PRICE
$13.25
CATALOG
PRICE
$ 7.95
12 GALLON CROSS-LINK POLYETHYLENE
TANK SUITABLE FOR KEROSENE, FUEL OIL,
AND GASOLINE. 2" CAP, ¼” NPT FITTING IN
BOTTOM. MOLDED IN THREADS FOR
MOUNTING WITH BOLTS. 18"L x 14"W x 15"H. SHIP WT. 7 LBS.
PART NO
100438
PART NO.
ST32C
LIST
PRICE
$ 9.90
FUEL TANK
PART NO.
FT0012
ROTARY CAM SWITCH
CATALOG
PRICE
$ 95.00
LIST
PRICE
$ 149.00
REPLACEMENT FUEL NOZZLE FOR HOT WATER
WASHERS, PORTABLE HIGH PRESSURE HEATERS, AND
AIR SCOOP HEATERS. SPECIFY NOZZLE SIZE WHEN
ORDERING.
FUEL SOLENOID VALVES
LIST
PRICE
$ 31.75
35.53
35.53
CATALOG
PRICE
$ 415.00
485.00
497.00
FUEL PUMPS
IGNITION TRANSFORMERS
PART NO.
5218301U
51776U
51525U
51771U
5929U
5LAY30
LIST
PRICE
$ 487.00
556.00
584.00
WT
24
24
20
CATALOG
PRICE
$ 9.75
USED AS A SAFETY FEATURE ON PRESSURE WASHERS.
SHUTS UNIT DOWN WHEN WATER TEMPERATURE
REACHES 210º. RESETS AT 140 TO 160ºF. 36" LONG WIRE
LEADS, ½" NPT PROBE.
PART NO.
23E099U2V
PAGE 71
LIST
PRICE
$ 43.20
CATALOG
PRICE
$ 36.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
UNLOADER VALVES
ADJUSTABLE UNLOADER
ECONOMY UNLOADERS
AN ECONOMICAL UNLOADER THAT CAN BE USED IN
MANY PRESSURE WASHER APPLICATIONS. STRAIGHT
THROUGH DESIGN FOR MINIMAL PRESSURE LOSS.
BRASS CONSTRUCTION, 3/8" MPT INLET AND OUTLET,
1/4" BYPASS. 2300 PSI, 5 GPM MAX.
CATALOG
PRICE
$ 47.00
LIST
PRICE
$ 63.00
PART NO
3390-0079
ANNOVI-REVERBERI
A HEAVIER DUTY UNLOADER THAT IS
EXCELLENT FOR COMMERCIAL CLEANING MACHINES.
STRAIGHT THROUGH DESIGN FOR MINIMAL PRESSURE
LOSS.BRASS CONSTRUCTION, 3/8" FPT INLET AND OUTLET,
1/4" BYPASS. 5000 PSI, 11 GPM, 194°F, MAX
CATALOG
PRICE
$ 130.00
LIST
PRICE
$191.05
PART NO
VHP39
PRESSURE UNLOADER
HIGH CAPACITY UNLOADER
ADJUSTABLE PRESSURE UNLOADER VALVE WITH STRAIGHT
THROUGH DESIGN. ZERO PRESSURE DURING BYPASS. 3/8"
FPT INLET, 3/8" MPT OUTLET, 3/8" FPT BYPASS. 5100 PSI 9
GPM, MAX RATINGS
FOR LARGE VOLUME WASH APPLICATION AND HIGH
PRESSURE HERBICIDE APPLICATIONS. BRONZE BODY,
BRASS AND STAINLESS INTERNALPARTS. ¾" FPT PORTS, 15
GPM, 200º F. MAX. RATINGS.
PART NO
AR20831
CATALOG
PRICE
$ 194.00
LIST
PRICE
$ 252.00
PART NO.
3390-0053
UNLOADING
CUP
RANGE-PSI MATERIAL
1000-2000
BUNA-N
LIST
PRICE
$ 867.00
CATALOG
PRICE
$ 650.00
REGULATOR/ UNLOADERS
STRAIGHT THROUGH DESIGN FOR MINIMAL
FLOW LOSS AND EASY INSTALLATION. VERY SMOOTH OPERATION, PULSE
FREE AND FULLY ADJUSTABLE. PRESSURE DROPS TO ZERO IN BYPASS MODE
TO REDUCE MOTOR LOAD. 3/8" FPT INLET AND OUTLET, 1/4" FPT BYPASS, AND
1/4" FPT GAUGE PORT.
ST-261
ST-261i
ST-280
PART NO.
ST-261
ST-261i
ST-280
DESCRIPTION
UNLOADER
UNLOADER w/INJECTOR
UNLOADER
UNLOADER/BYPASS KIT
UNLOADER/BYPASS KIT
UNLOADER/BYPASS KITS ARE FOR 2200/2300 SERIES
POWERLINE™ PUMPS. BRASS CONSTRUCTION. MOUNTS
DIRECTLY TO PUMP AND HAS A CHEMICAL INJECTOR. ½"
FPT INLET, 3/8" MPT OUTLET. 2600 PSI, 160ºF MAX.
RATINGS.
PART NO.
3390-0104/3A
3390-0104/3B
MAX GPM
2.0-3.2
3.2-4.0
LIST
PRICE
$ 184.00
184.00
CATALOG
PRICE
$ 60.00
67.00
91.00
LIST
PRICE
$ 76.75
83.60
106.60
MAX PSI/GPM
3600/10
3600/10
4060/10
CLOSE COUPLED BYPASS KIT FOR HYPRO 2200 AND
2300 POWERLINE™ PUMPS. INCLUDES UNLOADER AND
BYPASS/INLET ASSEMBLY. 1500 PSI, 5 GPM,
160º F MAX. RATINGS.
CATALOG
PRICE
$ 138.00
138.00
PART NO.
8000-0008
MAX GPM
2.0-3.2
LIST
PRICE
$ 158.00
UNLOADER/BYPASS KIT
UNLOADER/BYPASS KIT
ANNOVI-REVERBERI
ANNOVI-REVERBERI
CLOSE COUPLED BYPASS KIT FOR ANNOVI RK AND XM
SERIES PUMPS. INCLUDES UNLOADER, INJECTOR, AND
BYPASS/INLET ASSEMBLY. 3650 PSI, 3-5 GPM MAX. RATINGS.
1/2” MPT INLET, 3/8” MPT OUTLET.
UNLOADER/BYPASS KITS ARE FOR XT& XM SERIES ANNOVI
PUMPS. BRASS AND ALUMINUM CONSTRUCTION. MOUNTS
DIRECTLY TO PUMP AND HAS A CHEMICAL INJECTOR. ½" MPT
INLET, 3/8" MPT OUTLET. 2600 PSI, MAX. RATINGS.
PART NO.
AR20890
MAX GPM
2.0-3.0
www.sprayland.com
LIST
PRICE
$ 146.62
CATALOG
PRICE
$ 118.00
CATALOG
PRICE
$ 109.00
PART NO.
AR20400
PAGE 72
MAX GPM
3.0-5.5
LIST
PRICE
$ 176.75
CATALOG
PRICE
$ 135.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY GUNS & WANDS
TRIGGER GUNS
WANDS
STAINLESS PIPE WANDS
» LIGHTWEIGHT
» TRIGGER LOCKOUT
» FRONT ENTRY
» 3/8” FPT INLET, 1/4” FPT OUTLET
» 3050 PSI MAX. PRESSURE
» 8 GPM MAX. FLOW
» 320º F. MAX. TEMP.
CATALOG
PRICE
$ 25.00
LIST
PRICE
$ 38.90
PART NO.
ST-810
¼” MPT X 1/8” FPT. STAINLESS STEEL PIPE WANDS.
» HIGH IMPACT MOLDED PLASTIC
» TRIGGER LOCKOUT
» BOTTOM ENTRY
» 3/8” FPT INLET, 1/4” FPT OUTLET
» 5000 PSI MAX. PRESSURE
» 12 GPM MAX. FLOW
» 300º F. MAX. TEMP.
PART NO.
ST-1500
CATALOG
PRICE
$ 29.95
LIST
PRICE
$ 43.50
» STRAIGHT THROUGH DESIGN
» DURABLE MOLDED HANDLE
» TRIGGER LOCKOUT
» 3/8” FPT INLET, 1/4” FPT OUTLET
» 4000 PSI MAX. PRESSURE
» 12 GPM MAX. FLOW
» 300º F. MAX. TEMP.
INSULATED WANDS
PART NO.
3365-0005/24
3365-0005/36
3365-0005/47
3365-0005/60
3365-0005/79
LIST
PRICE
$ 54.00
PART NO.
291G-18BK
LIST
PRICE
$ 68.50
CATALOG
PRICE
$ 51.50
LIST
PRICE
$ 38.75
CATALOG
PRICE
$ 24.50
ADJUSTABLE FLEXIBLE WAND
CATALOG
PRICE
$ 41.00
FLEXIBLE PUSH/PULL DESIGN CAN BE ADJUSTED TO 90°. 36” LENGTH,
¼” MPT ENDS. 3050 PSI MAX.
LIST
PRICE
$ 152.76
CATALOG
PRICE
$ 96.50
TELESCOPING WAND
FOR HIGH VOLUME, LOW PRESSURE USES.
AVAILABLE IN BRASS OR STAINLESS
CONSTRUCTION. RUBBER COATING TO
PROTECT HAND AGAINST TEMPERATURE
EXTREMES. 700 PSI, 27 GPM, 190º F MAX
www.sprayland.com
CATALOG
PRICE
$ 10.25
12.50
14.50
25.95
26.50
LIST
PRICE
$ 13.65
18.05
22.50
31.15
32.05
FLEXIBLE TO GET THOSE HARD-TO-REACH PLACES. INDUSTRIAL
POLYURETHANE MIDDLE, 24” LENGTH, ¼” MPT ENDS. 2000 PSI MAX.
WASH DOWN GUN
LIST
PRICE
$ 143.20
478.23
HIGH IMPACT MOLDED GRIPS, ¼” MPT
COATED STEEL PIPE.
FLEXIBLE WAND
PART NO.
ST-85
PART NO.
ST-1200
ST-1200SS
LENGTH
24”
36”
47”
60”
79”
CATALOG
PRICE
$ 10.85
14.15
17.05
LIST
PRICE
$ 16.50
19.85
24.57
INSULATED DUAL WAND
PART NO.
ST-54
» OUR HEAVIEST DUTY GUN
» “EASY-ON” DESIGN TO REDUCE
HAND FATIGUE
» TRIGGER LOCKOUT
» BOTTOM ENTRY
» 3/8” FPT INLET, 1/4” FPT OUTLET
» 5000 PSI MAX. PRESSURE
» 12 GPM MAX. FLOW
» 300º F. MAX. TEMP.
PART NO.
ST-2605
LENGTH
24”
36”
48”
¼” MPT INLET, INSULATED GRIP VALVE /GRIP HANDLE, 40” LENGTH, ¼” FPT
OUTLETS. INCLUDES BRASS INJECTION TIP. 4500 PSI MAX.
CATALOG
PRICE
$ 34.00
LIST
PRICE
$ 42.75
PART NO.
ST-601
PART NO.
ST-001-24SS
ST-001-36SS
ST-001-48SS
CATALOG
PRICE
$ 107.00
360.00
PAGE 73
TELESCOPING WAND AND GUN THAT WILL EXTEND FROM 8 FT. TO 18 FT.
IDEAL FOR CLEANING BUILDINGS AND LARGE TRUCKS AND TRAILERS WHILE STILL ON
THE GROUND. 1/4” QUICK CONNECT TO ACCEPT YOUR SPRAY TIPS. RATED TO 3500
PSI, 10 GPM, 195ºF MAX.
LIST
PART NO.
DESCRIPTION
PRICE
16851
TELESCOPING WAND
$ 264.00
16854
GUTTER CLEANING ATTACHMENT
14.60
ARTEL-BELT
SUPPORT BELT
31.72
CATALOG
PRICE
$ 178.00
12.15
23.75
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
NOZZLES & PRESSURE HOSE
SPRAY NOZZLES
SEWER NOZZLES
MADE OF HARDENED STAINLESS STEEL FOR MAXIMUM
WEAR. 5000 PSI WORKING PRESSURE. 1/8” OR 1/4” NPT, OR
1/4" QUICK COUPLER INLET. AVAILABLE IN 0º, 15º, 25º, AND
40º SPRAY ANGLES. REFER TO THE NOZZLE RATE CHARTS
IN THIS CATALOG FOR CORRECT SIZE.
CATALOG
PART NO
TYPE
LIST
PRICE
1/8MEG-****
1/8” THREADED
$ 8.98
$ 6.85
1/4MEG-****
1/4” THREADED
8.98
6.85
QCMEG-****
QUICK COUPLER
8.98
6.85
QCMEG-6540
SOAP TIP (BRASS) 5.28
4.00
HOW TO ORDER:
MPT INLET
TYPE
ST-49
ATTACH TO HOSE OR WAND TO CLEAN OUT PIPES
AND DRAINS. ONE ORIFICE SPRAYS FORWARD AND
FOUR THAT SPRAY BACK TO PULL THE NOZZLE
THROUGH THE LINE. STAINLESS STEEL
CONSTRUCTION, 1/4” FPT INLET, 4200 PSI MAX.
**SPECIFY NOZZLE SIZE WHEN ORDERING.
PART NO
ST-49-**
ST-49R-**
(SAMPLE NO. 1/4MEG-25055)
TYPE
FIXED
ROTATING
ST-49R
1/4MEG- 25 055
QUICK
COUPLER
TYPE
ADJUSTABLE NOZZLE
PART NO.
3324-1001.1
3324-1001.15
3324-1001.2
3324-1001.25
3324-1001.3
3324-1001.35
3324-1001.4
3324-1001.45
3324-1001.5
TYPE
ORIFICE SIZE
SPRAY ANGLE
CHANGEOVER NOZZLE HEAD
ALLOWS YOU TO CHANGE BETWEEN TWO NOZZLES
FROM A SINGLE SPRAY LINE. HAS (1) ¼” FPT INLET,
AND (2) ¼” FPT OUTLETS. 3600 PSI MAX.
CATALOG
PRICE
$ 24.00
LIST
PRICE
$ 29.70
PART NO.
ST-56
ADJUSTABLE NOZZLE HEAD
ADAPTS TO SPRAY NOZZLE FOR USE WITH
INJECTION SYSTEM. SIMPLY ROTATE KNOB TO
DIVERT WATER AROUND THE NOZZLE TO SOAP
INJECT. 3600 PSI, 8 GPM MAX. RATINGS. NOZZLE NOT
INCLUDED.
LIST
PRICE
$ 25.05
PART NO.
ST-51
CATALOG
PRICE
$ 20.00
TEMP
MAX
190ºF
212ºF
PART NO.
3324-2001.1
3324-2001.15
3324-2001.2
3324-2001.25
3324-2001.3
3324-2001.35
3324-2001.4
3324-2001.45
3324-2001.5
ORIFICE
35
37
40
43
46
50
53
56
60
THIS NOZZLE IS THE SAME AS THE ADJUSTABLE NOZZLE BUT ALSO HAS A
PUSH-PULL OPTION FOR SOAP INJECTING. 3000 PSI, 300ºF MAX RATINGS.
SPECIFY NOZZLE SIZE WHEN ORDERING (SEE CHART).
ROTATING 0º JET PROVIDES
SUPERIOR CLEANING ABILITY OVER
STANDARD SPRAY NOZZLES AND IS
REPAIRABLE. ¼” FPT INLET. SPECIFY
ORIFICE SIZE* WHEN ORDERING.
PSI
MAX
3600
6000
ORIFICE
35
37
40
43
46
50
53
56
60
THE ADJUSTABLE NOZZLE WILL GIVE INFINITE SPRAY PATTERN
ADJUSTABILITY FROM 0º TO 80º ANGLE BY ROTATING THE NOZZLE HEAD.
3000 PSI, 300º F. MAX. RATINGS. ¼” FPT INLET. SPECIFY NOZZLE SIZE WHEN
ORDERING (SEE CHART).
LIST
CATALOG
PART NO.
PRICE
PRICE
3324-1001.**
$ 29.25
$ 23.00
ADJUSTABLE HI-LO NOZZLE
TURBO NOZZLES
PART NO.
ST-357-*
ST-457-*
CATALOG
PRICE
$ 16.95
36.00
LIST
PRICE
$ 21.19
45.00
PART NO.
3324-2001.**
IMPORTANT!
LIST
$ 138.20
165.75
CATALOG
PRICE
$ 79.00
115.00
LIST
PRICE
$ 35.50
CATALOG
PRICE
$ 28.00
IT IS VERY IMPORTANT TO SIZE THE NOZZLE TO YOUR WASHER FOR
PROPER PERFORMANCE. REFER TO YOUR OWNERS MANUAL OR THE
NOZZLE CHART ON PAGE 84 OF THIS CATALOG FOR PROPER ORIFICE SIZE.
HIGH PRESSURE HOSE ASSEMBLIES
HEAVY DUTY STEEL BRAIDED HOSE, 3/8” I.D. WITH 3/8” MPT
ENDS. HOSE IS RATED TO 250º F. MAX TEMP AND CAN BE
USED WITH HOT WATER WASHERS. CUSTOM LENGTHS AND
¼” I.D. HOSE AVAILABLE BY REQUEST. NOT RATED FOR
STEAM USE.
PART NO.
6M1T-25
6M1T-30
6M1T-40
6M1T-50
6M1T-75
6M1T-100
6M2T-50
LENGTH
25’
30’
40’
50’
75’
100’
50’
www.sprayland.com
MAX PSI
4000
4000
4000
4000
4000
4000
5400
LIST
PRICE
$ 58.88
70.44
94.88
117.70
176.81
222.34
156.40
CATALOG
PRICE
$ 47.00
58.00
70.50
90.00
145.00
174.00
125.00
PAGE 74
STEEL BRAIDED NON-MARKING HOSE COVER, ¼” I.D. WITH ¼” MPT
ENDS. HOSE IS RATED TO 250º F. MAX TEMP AND IS TYPICALLY
USED FOR CARPET CLEANING APPLICATIONS. CUSTOM LENGTHS
AVAILABLE BY REQUEST. NOT RATED FOR STEAM USE.
PART NO.
4M1T-50
4M1T-100
4M1T-200
LENGTH
50’
100’
200’
MAX PSI
3200
3200
3200
LIST
PRICE
157.73
275.15
531.90
CATALOG
PRICE
97.50
190.00
367.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
QUICK COUPLERS & SWIVELS
STRAIGHT THROUGH STYLE
FREE FLOW DESIGN FOR MINIMAL FLOW REDUCTION, 4500 PSI MAX. CONSTRUCTION.
COUPLERS
PART NO
QC304
QC306
QC304SS
QC306SS
FPT
SIZE
1/4”
3/8”
1/4”
3/8”
LIST
PRICE
$ 7.13
7.15
29.35
31.87
CATALOG
PRICE
$ 5.70
6.25
23.50
25.50
PART NO
QC304M
QC306M
QC304MSS
QC306MSS
MPT
SIZE
1/4”
3/8”
1/4”
3/8”
LIST
PRICE
$ 7.13
7.81
29.35
31.87
CATALOG
PRICE
$ 5.70
6.25
23.50
25.50
BRASS OR
STAINLESS
ADAPTERS
PLATED STEEL
PART NO
OR
STAINLESS STEEL QC314
QC316
QC314SS
QC316SS
PART NO
QC314M
QC316M
QC314MSS
QC316MSS
FPT
SIZE
1/4”
3/8”
1/4”
3/8”
LIST
PRICE
$ 2.23
2.55
6.88
9.40
CATALOG
PRICE
$ 1.80
2.05
5.50
7.50
MPT
SIZE
1/4”
3/8”
1/4”
3/8”
LIST
PRICE
$ 2.22
2.55
6.88
7.61
CATALOG
PRICE
$ 1.80
2.05
5.50
6.10
DOUBLE SHUT-OFF STYLE
COUPLER AND ADAPTER HAVE POSITIVE SHUT-OFF SEAL TO PREVENT FLUID LOSS, 2700 PSI MAX
COUPLERS
NPT
SIZE
1/4”
3/8”
3/8"
PART NO
QC204
BRASS
QC206
BRASS
SH3-62 STAINLESS
STEEL
LIST
PRICE
$ 7.65
29.52
38.85
CATALOG
PRICE
$ 6.50
24.60
32.00
ADAPTERS
PART NO
QC214
QC216
SH3-63
BRASS
BRASS
STAINLESS
STEEL
NPT
SIZE
1/4"
3/8"
3/8”
LIST
PRICE
$ 3.96
15.00
17.85
CATALOG
PRICE
$ 3.25
12.50
14.85
TWIST COUPLINGS
SCREW-ON COUPLINGS FOR QUICK AND EASY HOSE HOOKUPS. , 22MM INLET, 5800 PSI MAX. (SUFFIX “M” FOR MALE THREAD)
ADAPTER
PART NO
ST-41-1/4
ST-41-3/8
ST-41-1/4M
ST-41-3/8M
NPT
SIZE
1/4”
3/8”
1/4”
3/8”
LIST
PRICE
$ 3.08
3.08
3.08
3.08
CATALOG
PRICE
$ 2.15
2.15
2.15
2.15
CATALOG
PRICE
$ 9.95
PART NO.
SS838MF-A
BRASS AND STAINLESS CONSTRUCTION,
REBUILDABLE, 3/8” FPT x 3/8” MPT. 5070 PSI, 5 GPM,
300º F MAX.
LIST
PRICE
$ 23.15
PART NO.
ST-301
www.sprayland.com
LIST
PRICE
$ 29.17
LIST
PRICE
$ 6.38
7.69
6.38
7.69
CATALOG
PRICE
$ 5.10
6.15
5.10
6.15
LIST
PRICE
$ 73.44
CATALOG
PRICE
$ 58.75
HIGH PRESSURE RIGHT ANGLE SWIVELS
CATALOG
PRICE
$ 15.75
HEAVY DUTY “LIVE” BALL BEARING
CONSTRUCTION, 3/8” FPT INLET x 22MM SCREW
COUPLE OUTLET. 7300 PSI, 26.4 GPM, 300º F MAX.
PART NO.
ST-44
NPT
SIZE
1/4”
3/8”
1/4”
3/8”
HEAVY DUTY REBUILDABLE PLATED STEEL
ALLOY CONSTRUCTION. 3/8” FPT x 3/8” MPT. 5000
PSI, 10 GPM, 400º F.MAX
BRASS CONSTRUCTION 3/8” FPT x 3/8” MPT.
1000 PSI, 10 GPM 200º F MAX.
LIST
PRICE
$ 14.50
PART NO
ST-40-1/4
ST-40-3/8
ST-40-1/4M
ST-40-3/8M
HIGH PRESSURE SWIVELS
HIGH PRESSURE SWIVELS
PART NO.
900-3/8
COUPLER
CATALOG
PRICE
$ 24.25
PAGE 75
EXCELLENT REPLACEMENT SWIVELS FOR CAR WASH BOOMS AND
HOSE REELS. USED ON SPRAY-LAND TURF AND PRESSURE WASHER
SKID SPRAYERS. NICKEL-PLATED STEEL CONSTRUCTION,
REBUILDABLE, “LIVE” SWIVEL BEARING DESIGN, AND GREASE ZERT
ARE SOME FEATURES. 1/2” FPT INLET, 1/2” FPT OUTLET, 5000 PSI MAX.
PRESSURE.
PART NO.
9SS81AL
DESCRIPTION
SWIVEL
LIST
PRICE
$ 78.80
CATALOG
PRICE
$ 61.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRIC MOTORS
TOTALLY ENCLOSED FAN COOLED MOTORS
HEAVY DUTY
SINGLE PHASE MOTORS
» DESIGNED FOR MANY PURPOSE APPLICATIONS
» CONTINUOUS DUTY- 1.15 SERVICE FACTOR
» CAPACITOR START
» REVERSIBLE
» MANUAL THERMAL PROTECTION
» BALL BEARINGS FOR LONG LIFE
PART NO.
L3507M
L3510M
PL3514M
L3619TM
L3612TM
FDL3733TM
HP
3/4
1
1½
3
5
7½
RPM
1725
1725
1725
1725
1725
1725
NEMA
FRAME
56
56
56
84
184
215
VOLTS
115/230
115/230
115/230
230
230
230
SHAFT
DIA
5/8"
5/8"
5/8"
1 1/8"
1 1/8"
1 3/8”
WT
39
44
51
95
100
125
VOLTS
115/230
115/230
115/230
230
230
230
230
230
SHAFT
DIA
5/8"
5/8"
5/8"
1 1/8"
1 1/8"
1 1/8”
1 3/8”
1 3/8”
WT
51
52
43
92
102
135
135
174
CATALOG
PRICE
$ 185.00
194.00
255.00
555.00
560.00
719.00
LIST
PRICE
$ 242.00
336.00
413.00
775.00
677.00
887.00
HEAVY DUTY C-FACE
SINGLE PHASE
MOTORS
» EXCELLENT FOR BOLT-ON APPLICATIONS
» CONTINUOUS DUTY- 1.15 SERVICE FACTOR
» CAPACITOR START
» REVERSIBLE
» MANUAL THERMAL PROTECTION
» BALL BEARINGS FOR LONG LIFE
PART NO.
PCL3514M
CL3516TM
PCL3515M
CL3619TM
CL3612TM
FDL3732M
FDL3733TC
CL3712T
HP
1½
2
2
3
5
7½
7½
10
RPM
1725
1725
3450
1725
1725
1725
1725
1750
NEMA
FRAME
56C
56C
56C
184TC
184TC
184TC
215TC
215TC
LIST
PRICE
$ 321.00
537.00
483.00
696.00
912.00
987.00
949.00
1303.00
CATALOG
PRICE
$ 260.00
305.00
280.00
475.00
590.00
825.00
790.00
890.00
THREE PHASE MOTORS AVAILABLE BY SPECIAL ORDER
SHAFT COUPLINGS
ORDER EACH END NEEDED INDIVIDUALLY TO MAKE COMPLETE SET. HEAVY DUTY CENTER DISC IS MADE OF URETHANE
MATERIAL AND IS WHAT WE USE FOR OUR APPLICATIONS. MAXIMUM HORSE POWER IS ELECTRIC HP AT 1725 RPM. FOR
GAS ENGINES, MULTIPLY HP BY 1.6.
www.sprayland.com
PART NO.
2739-1001
2739-1002
2739-1003
2739-1004
2739-1005
2739-1006
BORE SIZE-I.D.
5/8” (3/16” KEY)
3/4” (3/16” KEY)
7/8” (3/16” KEY)
15/16” (1/4” KEY)
1” (1/4” KEY)
1 1/8” (1/4” KEY)
2741-1001
2741-1004
2741-1002
2741-1003
2741-1005
2741-1007
3/4”(3/16” KEY)
15/16” (1/4” KEY)
1” (1/4” KEY)
1 1/8” (1/4” KEY)
1 1/4” (1/4” KEY)
1 3/8” (5/16” KEY)
2729-1005
2729-2005
CENTER DISC
HEAVY DUTY CENTER DISC
PAGE 76
MAX H.P.
5
5
5
5
5
5
10.5
10.5
10.5
10.5
10.5
10.5
LIST
PRICE
$ 22.30
22.30
22.30
22.30
22.30
22.30
CATALOG
PRICE
$ 18.25
18.25
18.25
18.25
18.25
18.25
50.65
50.65
50.65
50.65
50.65
50.65
40.95
40.95
40.95
40.95
40.95
40.95
12.85
26.50
9.75
19.90
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
GAS ENGINES
4 HP OHV
ENGINE
GX SERIES
» RECOIL START
» RECOIL START
» SOLID STATE IGNITION
» SOLID STATE IGNITION
» OIL ALERT™ PROTECTION
» OIL ALERT™ PROTECTION
» 3/4" x 27/16" SHAFT
» 3/4" x 27/16" SHAFT
MODEL NO.
GX120UT1QX2
5.5 HP OHV
ENGINE
STARTER TYPE
RECOIL
WT.
30 LBS
LIST
PRICE
$ 497.00
CATALOG
PRICE
$ 385.00
MODEL NO.
STARTER TYPE
GX160UT1QX2
RECOIL
GX160UT1HX2*
RECOIL
GX160UT1QXE2
12 VOLT/3A
WT.
35
48
42
LIST
PRICE
$ 528.00
647.00
731.00
CATALOG
PRICE
$ 415.00
480.00
590.00
*WITH 6:1 GEAR REDUCTION
8 HP OHV ENGINE
11 HP OHV
ENGINE
» RECOIL OR ELECTRIC START
» RECOIL OR 12 VOLT
ELECTRIC START
» SOLID STATE IGNITION
» SOLID STATE IGNITION
» OIL ALERT™ PROTECTION
» OIL ALERT™ PROTECTION
» 1" x 31/2" SHAFT
» 1" x 31/2" SHAFT
MODEL NO.
STARTER TYPE
GX340UT2QA2 RECOIL
GX340U1QNE2 12 VOLT/3A
WT.
73
89
LIST
PRICE
$ 1012.00
1097.00
CATALOG
PRICE
$ 730.00
850.00
MODEL NO.
GX240UT1QA2
GX240UT1HX2*
GX240U1QAE2
LIST
CATALOG
STARTER TYPE
WT.
RECOIL
66
RECOIL
85
12 VOLT/3A
73
PRICE
$ 849.00
934.00
957.00
PRICE
$ 665.00
740.00
765.00
PRICE
$ 1097.00
1243.00
1281.00
PRICE
$ 780.00
985.00
1025.00
*WITH 6:1 GEAR REDUCTION
13 HP OHV
ENGINE
TWIN CYLINDER HORIZONTAL
SHAFT ENGINE
» RECOIL OR ELECTRIC START
» SOLID STATE IGNITION
» OIL ALERT™ PROTECTION
» 1" x 331/64" SHAFT
20/24 HP ENGINES
23/25/28 HP ENGINES
GREATER POWER FOR BIGGER JOBS.
» V-TWIN DESIGN
» ELECTRIC START
» SOLID STATE IGNITION
» OIL ALERT™ PROTECTION
» ORDER FUEL TANK AND MUFFLER SEPERATELY
» 20 AMP CHARGING SYSTEM
MODEL NO.
GX620R1QAF1
GX630RQAF1
GX670UTAF
GX660AX2
GX690RTAX2
VH*M5
VH*M6
GROSS
SHIP
HP
WT.
20
99
23
99
24
99
25
99
28
99
MUFFLER KIT-20/24 HP
MUFFLER KIT-23/25/28 HP
LIST
PRICE
$ 2089.00
1526.00
2207.00
1687.00
2090.00
192.00
192.00
CATALOG
PRICE
$ 1630.00
1365.00
1775.00
1495.00
1630.00
160.00
160.00
*INDICATE LETTER “L” OR “R” FOR LEFT OR RIGHT EXHAUST DISCHARGE (FACING SHAFT END) WHEN
ORDERING
www.sprayland.com
PAGE 77
MODEL NO.
GX390U1QA2
GX390U1QNE2
GX390U1QNR2
LIST
CATALOG
STARTER TYPE
WT.
RECOIL
85
12 VOLT/3A
105
12 VOLT/18A
105
GC SERIES
5 HP HORIZONTAL
SHAFT ENGINE
ECCONOMICAL, STANDARD DUTY 5 HP
ENGINE USED FOR PRESSURE WASHERS,
AUGERS, GO CARTS, TILLERS, AND MANY
OTHER USES. RECOIL START, OVERHEAD
VALVE, 3400 RPM, 3/4 x 25/16" SHAFT WITH
5/16" TAPPED END.
MODEL NO.
GC160LAQHA
STARTER TYPE
RECOIL
WT.
35
LIST
PRICE
$ 380.00
CATALOG
PRICE
$ 270.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
CARTS, WHEELS, MISC.
WHEELS ASSEMBLIES
CART
PNEUMATIC TIRES
BLACK POWDER PAINTED TUBE FRAME, PNEUMATIC
WHEELS, COMPACT DESIGN FOR SMALL PRESSURE
WASHERS, TRANSFER PUMPS, ETC. DIMENSIONS:
29" HIGH, 16" WIDE, 21" LONG. MOUNTING PLATE: 5"
WIDE BY 12" LONG.
SHIP WT 12 LBS.
LIST
CATALOG
PART NO.
PRICE
PRICE
C2112
$ 78.00
$ 59.00
KNOBBY TREAD, STEEL HUB, BALL BEARINGS, 1/2" OR 5/8"
BORE. 200 LBS MAX LOAD
TIRE SIZE
410/3.50-4
LIST
PRICE
$ 27.45
WT
2 LBS
CATALOG
PRICE
$ 25.95
TURF TIRES
TURF TREAD, STEEL RIMS
TIRE SIZE
16/6.5-8
23X8.50-12
26X12-12
RIM
MAX
HOLE LOAD
3/4" BORE
620
5 ON 4½"
705
5 ON 4 ½" 2250
WT
11
26
34
LARGE CARTS
LIST
CATALOG
PRICE
PRICE
$ 94.00
$ 70.00
179.00
148.00
260.00
215.00
USED FOR MOUNTING PRESSURE WASHERS,
SMALL GENERATORS, ETC. BLACK POWDER
PAINTED STEEL BASE AND HANDLE, PNEUMATIC
STEEL HUB WHEELS.
PART NO.
C2150
ATV TIRES
CATALOG
PRICE
$ 87.00
LIST
PRICE
$ 99.00
KNOBBY TREAD, STEEL RIMS,
4 ON 4" BOLT PATTERN.
495 LBS MAX LOAD.
TIRE SIZE
22X11X8
LIST
PRICE
$ 162.00
WT
19
WHEEL SPINDLES
PART NO.
SA-1250
S-1700
S-5113I-6
DELUXE CARTS
CATALOG
PRICE
$ 127.00
USED FOR MOUNTING LARGER PRESSURE
WASHERS, TRASH PUMPS, ETC. BLACK POWDER
PAINTED STEEL FRAME WITH PNEUMATIC STEEL
HUB WHEELS.
HIGH SPEED SPINDLES MADE OF
COLD ROLLED STEEL, 1" O.D.
INCLUDES CASTLE NUT, WASHER,
AND COTTER PIN. SHIP WT. 3 LBS
WEIGHT LOAD
1250 LBS
1700 LBS
3500 LBS
SHIP
WT.
3
4
6
LIST
PRICE
$ 17.25
23.35
32.76
CATALOG
PRICE
$ 14.50
18.75
29.50
WHEEL HUB KITS
EACH HUB COMES WITH TWO
BEARINGS, BEARING SEAL, AND
LUG NUTS. 1" BORE,
PART NO.
BT12-4
BT12-5
356200-6
BOLT
PATTERN
4 ON 4"
5 ON 4 ½"
6 –AG RIM
WT LOAD
1250 LBS
1250 LBS
3500 LBS
SHIP
WT
7
7
12
LIST
PRICE
$ 44.10
48.50
62.06
CATALOG
PRICE
$ 38.50
39.95
52.95
TRAILER JACK
TOPWIND JACK WITH LARGE FOOT PLATE FOR
LIFTING ON SOFTER GROUND. GREAT FOR BOAT
TRAILERS, SMALLER TRAILER SPRAYERS, UTILITY
TRAILERS, ETC. 15” LIFT, 2000 LB. CAPACITY. SHIP
WT 15 LBS.
PART NO.
151401
www.sprayland.com
LIST
PRICE
$ 64.00
CATALOG
PRICE
$ 42.00
PAGE 78
PART NO.
C2215
C2817
BASE
SIZE
15”w x 22”L
17”w x 28”L
WT
24
24
LIST
PRICE
$ 107.00
139.00
CATALOG
PRICE
$ 89.00
110.00
RECEIVER HITCH CARRIER
THIS CARGO CARRIER WILL MOUNT
TO A CLASS 3 RECEIVER HITCH
AND IS DESIGNED TO HOLD EXTRA
CARGO WHEN THERE IS NO ROOM
IN THE TRUCK OR SUV. PERFECT
FOR HAULING LIGHT DUTY
EQUIPMENT, EXTRA BAGS OF
FERTILIZER, ETC. 30”x48” CARGO
AREA, 500 POUND LOAD CAPACITY.
SHIP WT. 51 LBS.
PART NO.
HC500
LIST
PRICE
$ 160.00
CATALOG
PRICE
$ 130.00
HEAVY DUTY RECEIVER HITCH CARRIER
THE HC1000 CARRIER IS
SIMILAR TO THE HC500 BUT
WILL HOLD HEAVIER CARGO
AND INCLUDES A RAILING
AND A SELF STORING RAMP
FOR LOADING SPREADERS,
MOWERS, SNOW BLOWERS,
ETC. 36”x48” CARGO AREA,
1000 POUND LOAD CAPACITY.
SHIP WT. 120 LBS
PART NO.
HC1000
LIST
PRICE
$ 305.00
CATALOG
PRICE
$ 260.00
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
ELECTRICAL & MISC
SOLENOID SWITCH
TOGGLE SWITCHES
PART NO.
73020
2X466
73247
730047
TYPE
SPST ON-OFF
SPDT ON-OFF-ON
SPDT ON-OFF-ON (M)
DPDT ON-OFF-ON
LIST
PRICE
$ 7.45
10.70
8.60
13.70
USED TO ENERGIZE HIGH AMP 12 VOLT DEVICES.
OFTEN USED FOR 12 VOLT ELECTRIC HOSE REELS.
CATALOG
PRICE
$ 5.25
6.35
6.75
11.40
LIST
PRICE
$ 58.20
PART NO.
1198
"M" STANDS FOR MOMENTARY
HEAVY DUTY CORD SET 8 FT LONG,
PUSH BUTTON SWITCH
3-PRONG, OIL RESISTANT COVER
HEAVY DUTY MOMENTARY-ON PUSH BUTTON SWITCH.
MOISTURE RESISTANT DUST COVER. 50 AMP RATED.
OFTEN USED FOR 12 VOLT ELECTRIC HOSE REELS.
PART NO.
73475
CATALOG
PRICE
$ 48.50
LIST
PRICE
$14.50
TYPE
SPST SWITCH
FUSE HOLDERS
LIST
PRICE
$ 2.75
PART NO.
TYPE
9541
FOR AUTOMOTIVE
TYPE FUSES
LIST
PRICE
26.90
PART NO.
GA.
1230080
12/3-SO
CATALOG
PRICE
$ 12.95
CATALOG
PRICE
20.00
RUBBER GROMMETS
USED TO PROTECT WIRES AND HOSES FROM
FRAYING ON DRILLED HOLES. REQUIRES 13/16”
I.D. HOLE. WILL ACCEPT MATERIAL THICKNESS
TO 1/4”.
CATALOG
PRICE
$ 1.50
CATALOG
PRICE
$ .25
LIST
PRICE
$ .45
PART NO.
G3114-016000
NYLON CABLE TIES
FUSES
PART NO.
78105
78155
78205
LIST
PRICE
$ .53
.53
.53
TYPE
10
15
20
CATALOG
PRICE
$ .35
.35
.35
PART NO.
NS4
NS7
NS12
NS17
NS21
CIRCUIT BREAKER
AUTOMATIC RESET CIRCUIT BREAKER USED FOR 12 VOLT
ELECTRIC REELS AND OTHER APPLICATIONS WITH HIGH
AMP DRAW
LIST
CATALOG
PART NO.
AMPS
PRICE
PRICE
72165
40
$ 9.10
$ 6.85
TYPE
2-PRONG
2-PRONG
4-PRONG
WIRE
LENGTH
12 IN
12 FT.
24 FT.
LIST
PRICE
$ 2.35
12.88
27.97
1500 LB CAPACITY, 6 FT
LENGTH. SOLD IN PAIRS
PART NO.
11098
CATALOG
PRICE
$ 2.10
9.20
22.90
CATALOG
PRICE
$13.50
SMALL ENGINE HOUR METER OR A
COMBINATION TACHOMETER AND HOUR
METER THAT WORKS ON SINGLE
CYLINDER AND TWIN CYLINDER 4 CYCLE
GASOLINE ENGINES. VERY SIMPLE
INSTALLATION. NO BATTERIES NEEDED.
WORKS FROM SPARK PLUG PULSES.
FOR LIGHT DUTY 12 VOLT
ACCESSORIES. 5 AMP BUILT IN FUSE.
LIST
PRICE
$ 4.75
LIST
PRICE
$ 18.10
HOUR METER & HOUR/TACH METER
LIGHTER PLUG ADAPTER
PART NO.
87776
CATALOG
PRICE
$ .05
.08
.30
.50
.60
TIE DOWN STRAPS
MOLDED TRAILER CONNECTORS
PART NO.
9651
TR-12
TR-24
LIST
PRICE
$ .08
.10
.41
.65
.85
LENGTH
4"
7"
12"
17"
21"
CATALOG
PRICE
$ 3.95
HOUR METER:
RECORDS ACTUAL RUNNING TIME OF ENGINE. NON-ERASABLE.
HOUR/TACH COMBINATION:
HOUR METER -SAME AS FEATURES LISTED ABOVE. TACHOMETERSHOWS ENGINE RPMS (UP TO 9000 RPM) FLASH ALERT-ALERTS
YOU TO LUBE & CHANGE OIL IN ENGINE EVERY 25 HOURS
BATTERY CLIPS
STEEL CLIPS FOR USE WITH SMALL 12 VOLT
DEVICES. 25 AMP MAX.
PART NO.
1485N
LIST
PRICE
$ 1.60
www.sprayland.com
PART NO
924800
924802
CATALOG
PRICE
$ 1.40
PAGE 79
DESCRIPTION
HOUR METER
HOUR/TACH
LIST
PRICE
$ 99.85
111.80
CATALOG
PRICE
$ 73.50
80.75
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SAFETY PRODUCTS
UNLINED CHEMICAL GLOVES
GOGGLE
OUR MOST POPULAR GLOVES! MADE
OF GREEN NITRILE RUBBER AND IS
WIDELY USED FOR AGRICULTURAL
AND COMMERCIAL TURF USE. IDEAL
FOR CHEMICAL HANDLING, CLEANING,
AND DEGREASING.
CLEAR FOG-FREE LENS WITH ELASTIC HEAD
BAND AND WILL FIT OVER GLASSES. QUALITY
FIT AND AVAILABLE IN VENTED AND
UNVENTED STYLES.
PART NO.
40201
STYLE
VENTED
CATALOG
PRICE
$ 4.99
LIST
PRICE
$ 5.94
PART NO.
40604
40605
40606
SAFETY GLASSES
LIST
PRICE
$ 4.10
4.10
4.10
SIZE
9 (M)
10 (L)
11 (XL)
ANHYDROUS GLOVES
THESE DELUXE GLASSES ARE LIGHTWEIGHT
AND DURABLE FOR DEFLECTING SPARKS AND
FLYING DUST. GREAT FOR GENERAL SHOP
USE.
PART NO.
LIST
CATALOG
20101
$ 5.35
$ 4.20
RECOMMENDED OVER NITRILE WHEN
HANDLING ANHYDROUS AMMONIA OR
PROPANE BECAUSE PVC WILL NOT CRACK
FROM THE COLD TEMPERATURE. BLACK
PVC RUBBER WITH LINER AND IS CHEMICAL
RESISTANT.
LIST
PART NO.
PRICE
30401
$ 5.40
FACE SHIELD
LIGHTWEIGHT FULL-FACED SHIELD WITH
ADJUSTABLE HEAD GEARFOR HANDLING
CHEMICALS, DEFLECTING SPARKS AND
SAND
BLASTING.
LIST
CATALOG
PART NO.
PRICE
PRICE
20201
$ 24.60
$ 20.70
LIGHTWEIGHT, ECONOMICAL, DISPOSABLE GLOVES
GIVE MAXIMUM TOUCH SENSITIVITY WHEN WORKING
WITH SMALL PARTS. RESISTANT TO MANY
CHEMICALS AND OILS. BOX OF 100.
PART NO.
40609
40611
CARTRIDGE TYPE RESPIRATOR THAT FITS
COMFORTABLY AND GIVES GOOD VISIBILITY.
1/4 TURN TWIST-ON CARTRIDGES ARE COLOR
CODED FOR TYPE OF RESPIRATOR BEING
USED.
TYPE
CHEMICAL/PAINT/DUST
ANHYDROUS AMMONIA
REPLACEMENT CART. FOR 40507 (PR)
REPLACEMENT CART. FOR 40504 (PR)
CATALOG
PRICE
$ 4.20
DISPOSABLE GLOVES
RESPIRATORS
PART NO.
40507
40504
40510
40509
CATALOG
PRICE
$ 3.05
3.05
3.05
LIST
PRICE
$ 67.10
50.53
14.30
14.30
LATEX COATED WORK GLOVES
CATALOG
PRICE
$ 56.50
44.00
13.50
13.50
LIGHTWEIGHT WORK GLOVES FOR A VARIETY
OF USES. CRINKLE LATEX PALM SIDE, STRING
KNIT BACK SIDE.
PART NO
GW36003
DISPOSABLE DUST MASKS
DISPOSAL FACE MASK WITH ELASTIC STRAP AND
ADJUSTABLE NOSE PIECE. THIS MASK IS DESIGNED
TO KEEP OUT DUST, GRAIN CHAFF, ETC. IT IS NOT
APPROVED FOR TOXIC DUST OR MISTS.
LIST
CATALOG
PART NO.
PRICE
PRICE
50102
BOX OF 50
$ 15.80
$ 13.25
LATEX
NITRILE
CATALOG
PRICE
$ 11.50
15.75
LIST
PRICE
$ 14.68
17.51
LIST
PRICE
$ 7.44
DESCRIPTION
WORK GLOVES
CATALOG
PRICE
$5.95
CHEMICAL APRON
GREEN PVC APRON WITH NYLON TIES.
RESISTS CHEMICALS, OILS AND GREASE. .020
THICKNESS.
LIST
CATALOG
PART NO.
PRICE
PRICE
40702
$ 10.75
$ 8.50
RINSE TANK
3 GALLON FRESH WATER TANK TO MOUNT ON
YOUR SPRAYER FOR CLEAN UP AFTER
HANDLING CHEMICALS. STATE AND LOCAL
ORDINANCES MAY REQUIRE FRESH WATER
TANKS ON SPRAYERS WHEN HERBICIDES AND
PESTICIDES ARE APPLIED.
PART NO.
RT-3
www.sprayland.com
LIST
PRICE
$ 40.65
CATALOG
PRICE
$ 39.25
PAGE 80
DISPOSABLE COVERALLS
WHITE, LIGHTWEIGHT TYVEK MATERIAL FOR HANDLING
CHEMICALS, PAINTING, HIGH PRESSURE WASHING, ETC.
RESISTS OILS, CHEMICALS, DIRT, AND GRIME.
PART NO.
40803
40804
SIZE
LARGE
X-LARGE
LIST
PRICE
$12.50
12.50
CATALOG
PRICE
$ 9.95
9.95
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PORTABLE SPACE HEATERS
KEROSENE/FUEL OIL
MODEL MH50K - 50,000 BTU
MH75KT- 75,000 BTU
THESE COMPACT PORTABLE HEATER ARE
PERFECT IN SMALL AREAS FOR THE
HOBBYIST AND DO-IT-YOURSELFER. BUILTIN THERMOSTAT (75K), FUEL GAUGE, AND
ON/OFF SWITCH.
MODEL MH210KT - 210,000 BTU
MODELS MH125KT - 125,000 BTU
MH175KT - 175,000 BTU
A VERSATILE MID-SIZED UNIT WHEELS RIGHT
TO THE SPOT YOU WANT TO WARM IT UP
QUICKLY. USED FOR A WIDE VARIETY OF JOBS.
BUILT-IN THERMOSTAT FOR FUEL ECONOMY
AND COMFORT, ON/OFF SWITCH, FUEL GAUGE,
AND AIR PRESSURE GAUGE.
THESE UNITS ARE POPULAR AT
CONSTRUCTION SITES TO HEAT UP THE
WORK AREA FAST! BUILT RUGGED AND
DELIVERS HEAT ON THE COLDEST DAYS.
FEATURES LIGHTED POWER SWITCH,
THERMOSTAT, FUEL GAUGE, LARGE TIRES
AND EXTENSION CORD CLEATS.
PROPANE
MODEL MH125FAV 75,000-125,000 BTU
MODEL MH55FAV 55,000 BTU
THIS INTERMEDIATE SIZED HEATER IS
GREAT FOR GARAGES, FINISH CARPENTRY
AND OTHER JOBS THAT REQUIRE CLEAN
EFFICIENT HEAT. VARIABLE BTU SETTING
FOR DIFFERENT HEATING NEEDS.
THIS UNIT IS DESIGNED FOR SMALL
WORK AREAS. LIGHT WEIGHT FOR
EASY PORTABILITY. PUSH BUTTON
IGNITION. THERMOSTAT NOT
AVAILABLE.
KEROSENE/FUEL OIL HEATERS
MODEL NO.
MH50KT
MH75KT
MH125KT
MH175KT
MH210KT
MODEL NO.
FUEL TYPE
BTU’S/HR
FUEL CAPACITY
CONSUMPTION / HR
(MAX)
IGNITION
AIR FLOW (CFM)
SAFETY SYSTEM
HEATED AREA
(SQ. FT.)**
SHIPPING WT. (LBS)
MODEL NO.
FUEL TYPE
BTU’S/HR
CONSUMPTION / HR
(MAX)
IGNITION
AIR FLOW (CFM)
SAFETY SYSTEM
HEATED AREA
(SQ. FT.)**
SHIPPING WT. (LBS)
BTU RATING
50,000
75,000
125,000
175,000
210,000
LIST
PRICE
$ 302.14
350.10
470.55
545.85
685.56
CATALOG
PRICE
$ 185.00
215.00
285.00
315.00
390.00
THESE HEATERS ARE ECONOMICAL TO USE
AND POWERFUL ENOUGH TO HEAT UP A LARGE
AREA. SUITED FOR CONSTRUCTION, MASONRY,
WAREHOUSE USE. BUILT-IN THERMOSTAT,
ELECTRONIC IGNITION.
PROPANE HEATERS
MODEL NO.
MH55FAV
MH125FAV
MH170FAVT
MH400FAVT
MH125KT
KEROSENE/FUEL OIL
125,000
8.5 GAL.
.93 GAL
MH175KT
KEROSENE/FUEL OIL
175,000
13.4 GAL.
1.3 GAL
MH210KT
KEROSENE/FUEL OIL
210,000
13.4 GAL.
1.60 GAL
SPARK
165/240
AUTO SHUT OFF
1,200/1,750
SPARK
275
AUTO SHUT OFF
3,000
SPARK
400
AUTO SHUT OFF
4,250
SPARK
400
AUTO SHUT OFF
6,000
43
71
84
94
MH55FAV
PROPANE
30,000-55,000
1.2 TO 2.08 LBS
MH125FAV
PROPANE
75,000-125,000
3.5 TO 5.8 LBS
MH170FAVT
PROPANE
125,000-170,000
5.8 TO 7.8 LBS
MH400FAVT
PROPANE
250,000-400,000
11.5 TO 18.5 LBS
CONTINUOUS
300
AUTO SHUT OFF
1,250
CONTINUOUS
350
AUTO SHUT OFF
3,000
ELECTRONIC
450
AUTO SHUT OFF
4,000
ELECTRONIC
1400
AUTO SHUT OFF
9,000
20
25
34
51
MH50K/MH75KT
KEROSENE/FUEL OIL
50,000/75,000
4 GAL./6 GAL.
.38 GAL/.56 GAL
MODELS: MH155AT 155,000 BTU
170VT 125-170,000 BTU
BTU RATING
30,000-50,000
75,000-125,000
125,000-170,000
250,000-400,000
LIST
PRICE
$255.82
278.17
451.48
922.00
CATALOG
PRICE
$125.00
189.00
285.00
520.00
SPRAY-LAND CARRIES A
FULL LINE OF PARTS IN
STOCK TO SERVICE MOST
BRANDS OF PORTABLE
KEROSENE* AND PROPANE
HEATERS.
CALL US FOR YOUR SERVICE
NEEDS!
*EXCEPT WICK TYPE KEROSENE HEATERS.
**AREA BASED ON A 40°F HEAT RISE
www.sprayland.com
PAGE 81
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
KEROSENE HEATER PARTS
STANDARD KIT
HEAVY DUTY KIT
WHEEL & HANDLE KITS
REPLACEMENT IGNITORS
MAKES YOUR HEATER EVEN MORE PORTABLE.
EASY TO ASSEMBLE AND DESIGNED TO FIT ALL
35,OOO, 50,000, 55,000, AND 70,000 BTU
DESA HEATERS. BRANDS INCLUDE MASTER,
REDDY, REMINGTON, KNIPCO, AND OTHERS.
INCLUDES ASSEMBLY INSTRUCTIONS. SPECIAL
PRICE WHILE QUANTITIES LAST!
USED ON 30,000 TO 70,000 BTU MASTER, REDDY,
KNIPCO, DAYTON,AND TORO HEATERS (UP TO
1998).
HA3013
SPARK PLUG
$ 4.36
PART NO.
HA1206
HA1202
DESCRIPTION
STANDARD KIT
HEAVY DUTY KIT
WT.
5
10
FOR MASTER, REDDY, KNIPCO, DAYTON,
UNIVERSAL, ALL PRO, AND OTHER DESA
HEATERS (UP TO 1998).
PP211
SPARK PLUG
$19.64
PRICE
$45.00
61.50
USED ON TORO, LAWNBOY, CENTURY,
PORTA-HEAT, RED LINE, CHAMPION, AND MANY
OTHERS.
147080
SPARK PLUG
$15.15
AIR GAUGE KIT
FOR MASTER, REDDY, KNIPCO, DAYTON,
UNIVERSAL, ALL PRO, AND OTHER DESA
HEATERS (AFTER 1998).
PP200 ALL KEROSENE MODELS
36.45
USED TO CHECK PUMP PRESSURE FOR
CORRECT TUNING OF YOUR KEROSENE
HEATER. WORKS ON ALL MODELS.
GA1518
0-15 PSI
$10.50
USED ON MR HEATER BRAND HEATERS
22144
ALL KEROSENE MODELS
7.00
FILTER KITS FOR KEROSENE HEATERS
REPLACEMENT TRANSFORMERS
REPLACEMENT TRANSFORMER FOR TORO,
LAWNBOY PORTA-HEAT, CENTURY, RED LINE,
CHAMPION, ALL PRO, AND MANY OTHERS. SHIP WT.
5 LBS
154009
TRANSFORMER
$ 96.00
IF YOUR AIR FILTERS
LOOKS LIKE THIS:
REPLACEMENT AIR FILTERS AND FUEL
FILTER FOR 100,000, TO 200,000 BTU
MASTER, REDDY, KNIPCO, DAYTON, MR
HEATER, AND OTHER BRANDS.
PART NO.
PP214
DESC.
FILTER KIT
REPLACEMENT TRANSFORMER FOR MASTER,
REDDY, KNIPCO, REMINGTON, DAYTON, AND
OTHERS. SHIP WT. 2 LBS
PRICE
$ 14.85
102482-04
REPLACEMENT AIR FILTERS AND FUEL
FILTER FOR 30,000 TO 70,000 BTU
MASTER, REDDY, KNIPCO, DAYTON, AND
OTHER BRANDS.
PART NO.
PP213
DESC.
FILTER KIT
PRICE
$ 6.40
FOR PORTA-HEAT, LAWN BOY, AND TORO BEFORE
1992. SCREWS INTO TANK
147046
NO LONGER AVAILABLE
PART NO.
F260654
FOR TORO HEATERS BUILT AFTER 1992. SPLICE IN
FUEL LINE.
148647
$2.40
DESC.
FILTER KIT
PRICE
$ 9.22
REF
1
2
PART NO.
DESC.
PRICE
148442
INTAKE FILTER $ 1.20
154822
OUTPUT FILTER
9.65
1
REPLACEMENT FILTERS FOR CHAMPION,
CENTURY, RED LINE, ACE, JIM DANDY,
AND OTHER BRANDS.
2
www.sprayland.com
REPLACEMENT FUEL FILTERS
REPLACEMENT AIR FILTERS FOR TORO,
LAWNBOY, PORTA-HEAT, ALL PRO,
UNIVERSAL, AND OTHER BRANDS.
REPLACEMENT AIR FILTERS FOR TORO,
40,000 & 55,000 BTU HEATERS BUILT
AFTER 1992
1
$ 80.00
USED ON MR HEATER BRANDS. SHIP WT. 4 LBS.
22142
22142
TRANSFORMER
$55.00
IF YOUR FILTER LOOKS
LIKE THIS:
2
TRANSFORMER
REF
1
2
PART NO.
147790
154467
USED ON 30/35/50,000 BTU MASTER, REDDY,
KNIPCO, DAYTON, AND OTHER BRANDS.
PART NO.
HEATER SIZE
PRICE
M50876-01
30,000 BTU
$ 9.65
M50876-04
35,000 BTU
10.90
M50876-02
50,000 BTU
13.85
FOR 100/110/150,000 BTU REDDY, MASTER, KNIPCO,
DAYTON AND OTHERS. ALSO FOR ALL PRO,
UNIVERSAL AND 40/55,000 BTU CHAMPION.
106896-01
$ 6.60
FOR 125/175/210,000 BTU MR HEATER BRANDS.
28780
$ 12.25
DESC.
PRICE
INTAKE FILTER
NLA
OUTPUT FILTER
4.85
PAGE 82
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
TECHNICAL INFORMATION
USEFUL FORMULAS
NOZZLE SPACING
IF THE NOZZLE SPACING ON YOUR BOOM IS DIFFERENT THAN THOSE
TABULATED ON THE SPRAY CHARTS, MULTIPLY THE TABULATED FIGURES
BY ONE OF THE FOLLOWING FACTORS:
GPM GALLONS PER MINUTE
GPA GALLONS PER ACRE
GPLM GALLONS PER LANE MILE
GAL/1000FT² GALLONS PER 1000 SQUARE FEET
MPH MILES PER HOUR
W WIDTH BETWEEN NOZZLES (INCHES)
WHERE TABLES ARE BASED ON 20" NOZZLE SPACINGS
OTHER SPACINGS
GPM
= GPA x MPH x W
(PER NOZZLE)
5940
CONVERSION FACTOR 2.5
OTHER SPACINGS
GPM
= GPLM x MPH
60
GPA
= 5940 x GPM (PER NOZZLE)
MPH x W
GAL/1000FT2
= 136 x GPM (PER NOZZLE)
MPH x W
=
10"
12"
14"
16"
18"
22" 24"
36"
2
1.67
1.43
1.25
1.11
.91
.56
.83
WHERE TABLES ARE BASED ON 40" NOZZLE SPACINGS
GPM
= GAL/1000FT2 x MPH x W
(PER NOZZLE)
136
GPLM
8"
32"
34"
36"
38"
42"
44"
48"
CONVERSION FACTOR 1.43 1.33 1.25
28"
30"
1.18
1.11
1.05
.95
.91
.83
60 x GPM
MPH
IMPACT FORCE/CLEANING POWER
= .0526 x GPM x √PSI
(LBS. CLEANING FORCE HITTING SURFACE)
SPEED CALIBRATION
MPH= DISTANCE (FEET) x 60
TIME (SECONDS) x 88
SPEED (MPH)
3
3.5
4
4.5
5
6
7
8
9
10
TIME (SEC) TO TRAVEL
A DISTANCE OF:
100 FEET 200 FEET 300 FEET
23
45
68
20
39
58
17
34
51
15
30
45
14
27
41
23
34
19
29
17
26
23
20
SPRAY
HEIGHT
SPRAY
ANGLE
MISCELANEOUS CONVERSIONS
ONE ACRE = 43,560 SQUARE FEET
ONE GALLON PER ACRE = 2.9 OUNCES PER 1000 FT²
ONE GALLON = 128 OUNCES
ONE POUND PER SQUARE INCH (PSI) = .069 BAR = 6.895 KPa
THEORETICAL
COVERAGE
PIPE THREAD SCALE
SPECIFIC
WEIGHT OF SOLUTION
GRAVITY
7.0 LBS PER GALLON
.84
8.0 LBS PER GALLON
.96
8.34 LBS PER GALLON - WATER
1.00
9.0 LBS PER GALLON
1.08
10.0 LBS PER GALLON
1.20
10.65 LBS PER GALLON - 28% NITROGEN 1.28
11.0 LBS PER GALLON
1.32
12.0 LBS PER GALLON
1.44
14.0 LBS PER GALLON
1.68
www.sprayland.com
CONVERSION
FACTOR
.92
.98
1.00
1.04
1.10
1.13
1.15
1.20
1.30
PAGE 83
PIPE SIZES ARE MEASURES BY PIPE THREAD SCALE. A COMMON ERROR MADE
WHEN SIZING THREADED FITTINGS OCCURS WHEN A RULER IS USED. SEE THE
ILLUSTRATION BELOW FOR EASY REFFERENCE (MEASURE OUTSIDE DIAMETER).
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
Gasoline engines should require about 1.6 times more horsepower than electric.
www.sprayland.com
PAGE 84
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
SPRAY TIP RATE CHART
BROADCAST AND TURF RATES
ORANGE
(TP, XR) 8001
(TP, XR, TT) 11001
[100 MESH]
GREEN
(TP, TJ60, XR) 80015
(AI, TJ60, TP, TT, XR )
110015
[100 MESH]
YELLOW
( TJ60, TP, XR) 8002
(AI, TJ60, TP,TT, XR ) 11002
1/4TTJ02
[50 MESH]
PURPLE
AI 110025
[50 MESH]
BLUE
( TJ60, TP, XR) 8003
(AI, TJ60, TP, TT, XR ) 11003
[50 MESH]
TJ60 [100MESH]
RED
( TJ60, TP, XR) 8004
(AI, TJ60, TP, TT, XR ) 11004
1/4TTJ04
TF-2
[50 MESH]
BROWN
( TJ60, TP, XR) 8005
(AI, TJ60, TP, TT, XR ) 11005
1/4TTJ05
TF-2.5
[50 MESH]
GREY
( TJ60, TP, XR) 8006
(AI, TJ60, TP, TT, XR ) 11006
1/4TTJ06
TF-3
[50 MESH]
WHITE
( TJ60, TP, XR) 8008
(AI, TJ60, TP, TT, XR ) 11008
1/4TTJ08
TF-4
[50 MESH]
(TP, XR) 8010, 11010
LT. BLUE
TJ60 8010
(AI, TJ60, ) 11010
1/4TTJ10
TF-5
(TP, XR) 8015, 11015
LT. GREEN
1/4TTJ15
TF-7.5
TP 8020, 11020
BLACK
TF-10
www.sprayland.com
PAGE 85
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
TERMS AND CONDITIONS
ORDERING:
Orders may be placed by phone, fax, mail, email, or in person.
PAYMENT TERMS:
Spray-Land USA accepts check, cash., Mastercard, Visa, and Discover Card. If shipping out to you, we suggest that you
pay by credit card (debit card) or check to avoid C.O.D. charges if you don’t have an account with us (DO NOT send
cash).
CONDITIONS AND PRICES:
All specifications in this catalog are in U.S. measurements. Metric conversions are available upon request. All prices in
this catalog are are quoted in U.S. Dollars and are current at the time of printing but are subject to change without notice.
However, you will be advised of any price change if different from the current Spray-Land catalog before shipment. Prices
in this catalog do not include sales/use tax. Iowa residents will be charged 6% Iowa Sales Tax on all purchases (plus
additional for local option taxes if applicable) unless we have a qualifying tax exempt form of file. Where applicable, tax
must be added to the order depending on various state and city laws and the nature of the sales use.
SHIPPING:
Unless other arrangements are made, all orders will be shipped F.O.B. Marion, Iowa USA. Drop ship orders may have a
service charge (depending on the vendor policy). Most shipments under 150 pounds will be sent by UPS unless other
arrangements are made. All shipments over 150 pounds will be sent by the most economical freight line.
RETURNS:
Contact Spray-Land USA for an MRA (Material Return Authorization) number for any products to be returned. No
returns will be accepted without an MRA number from our company. All orders must be sent back within 30 days of
receipt of the merchandise and be accompanied by a copy of the original invoice . Returns may be subject to a 15%
restocking charge except on warranty returns and shipping errors. All returns must be sent freight prepaid. NO C.O.D.’s
WILL BE ACCEPTED!
SHIPPING DAMAGES/SHORTAGES:
In the presence of the delivery driver, count all packages and inspect for damage. All shipments sent from Spray-Land
are in good condition at the time of shipment. If there is a shortage or damage, have the driver sign and note the problem
on the manifest. In the event that you need to file a claim with the delivery carrier, you should do so within 15 days of
delivery or you may forfeit any claim on that shipment. CLAIMS FOR DAMAGE OR SHORTAGE MUST BE MADE BY
YOU THE RECEIVER. WE AS A SHIPPER CANNOT FILE A CLAIM FOR YOU!
WARRANTY LIMITATIONS:
Spray-Land USA accepts no responsibility for discrepancies, errors, or illustrations in this catalog. However, the items are
guaranteed to operate satisfactory for their intended use and service. The manufacture’s warranty policies will determine
the disposition on any product for repair or replacement. Spray-Land gives no warranties, expressed or implied, on any
product it sells except as expressly given by the manufacture of the product. The purchaser agrees that the limit of
Spray-Land USA on claims and damages of the product does not exceed the invoice price. SPRAY-LAND USA WILL
NOT, IN ANY CASE, BE HELD LIABLE FOR ANY LOSS OR DAMAGE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES!
www.sprayland.com
PAGE 86
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
N
5800 LINN-AIRE AVENUE
MARION, IOWA 52302
13
S
MARION
STOP LIGHTS
151
WALMART
57th AVENUE
62nd STREET
SPRAY-LAND USA IS A MANUFACTURER OF
HIGH PRESSURE WASHERS, TURF SPRAYERS,
INJECTION SPRAYERS, FOAM MARKERS,
INNOCULATORS, AND LIQUID DE-ICE
SPRAYERS. WE ALSO CUSTOM BUILD
EQUIPMENT TO YOUR SPECIFICATIONS.
E
W
LINN-AIRE AVENUE
STOP LIGHT
SOME OF THE BRAND NAMES WE SERVICE:
ANNOVI-REVERBERI
GENERAL PUMP
LIVESTOCK WATERS
www.sprayland.com
PAGE 87
PORTABLE SPACE HEATERS
LOCAL AREA 1-319-377-1050
TOLL FREE
1-800-477-1051
24 HR FAX
1-319-377-2401
PRSRT STD
U.S. POSTAGE
PAID
5800 LINN-AIRE AVENUE
MARION, IOWA 52302
MARION, IA
PLEASE RECYCLE!
PRESSURE WASHERS
SPRAYERS
PAGES 3-13
PAGES 60-64
GPS GUIDANCE
FOAM MARKERS
ELECTRIC MOTORS
PAGES 43-44
PORTABLE SPACE HEATERS
PAGE 78
PAGES 50-51
PAGE 15
SPRAYER PUMPS
HIGH PRESSURE PUMPS
PAGES 66-69
PAGES 16-26
GAS ENGINES
SPRAY MONITORS
SPRAY TIPS
TANKS
PAGES 42-44
PAGE 81
PAGES 27-28
PAGE 74
HOME
INDUSTRY
AGRICULTURE
TURF MANAGEMENT
SEE US ON THE INTERNET!
PEST CONTROL
POWER CLEANING
LIQUID DE-ICE
CUSTOM APPLICATIONS
WWW.SPRAYLAND.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement